E32D5 ON THE P12M Proofer/Holding Cabinet TECHNICAL DATA SHEET FOR

E32D5 ON THE P12M Proofer/Holding Cabinet TECHNICAL DATA SHEET FOR
E32D5 / P12M
TECHNICAL DATA SHEET FOR
E32D5 ON THE P12M Proofer/Holding Cabinet
Full Size Digital / Electric Convection Oven on a
12 Tray Manual / Electric Proofer/Holding Cabinet
STANDARD FEATURES
•
•
•
•
•
•
•
Full size sheet pan capacity
5 tray Oven / 12 tray Proofer
Compact 287/8” / 735mm width Low unit height 697/8” / 1775mm
Side hinged doors (standard LH hinge)
Optional RH hinge (field convertible)
Dual halogen lamps in Oven and Proofer
Proofer with dual function Proof and Holding modes
OVEN
• 31/3”/ 85mm tray spacing
•
•
•
•
•
•
•
•
•
Electronic digital display Time and Temperature controls
Programmable for up to 20 programs
Water injection mode
High performance bi-directional reversing fan system
Safe-Touch vented door
Porcelain enameled oven chamber
Plug-in continuous oven door seal
5 oven wire racks supplied
100% recyclable packaging
PROOFER
• 27/8”/ 74mm tray spacing
•
•
•
•
•
•
•
Auto water fill system with optional integrated water filter kit Continuous door seal
Low velocity circulation fan system
Mechanical thermostat and Humidity level control Cabinet temperature display thermometer
4 dia. 3” / 76mm castors with 2 front castors dual wheel and swivel lock, 2 rigid rear castors
100% recyclable packaging
ACCESSORIES
•
•
Optional 3M Cuno water filter kit complete with cartridge and connection fittings
Installs in pre-fitted rear housing of cabinet for flush rear installation E32D5 Unit shall be a Moffat electrically heated Turbofan convection oven E.T.L. listed and NSF-4 listed. The oven shall have a one piece porcelain enameled oven
chamber, stainless top and sides and safe touch vented easy clean side hinged door that offers field reversible hinging. Oven shall have capacity for five full size sheet pans.
The oven shall be controlled by an electronic control having separate digital displays and adjusting knobs for time and temperature functions. The oven control shall allow both
manual and programmed operating modes and have separate control keys for water injection, oven light function and timer operation. The unit shall include dual halogen
oven lamps. Unit shall be supplied in 100% recyclable shipping packaging.
P12M Unit shall be a Moffat electrically heated Turbofan Proofer and Holding Cabinet ETL Listed and NSF-4 listed. The proofer and holding cabinet shall have double
skin construction with stainless steel interior and exterior sides, front and top. Door shall be side hinged and field reversible. Unit shall have capacity for up to 24 half size
sheet pans or 12 full size sheet pans. A single speed fan shall gently and evenly circulate air around the cabinet. Cabinet shall be controlled by a mechanical thermostat and
humidity via a control of the water tank. A thermometer shall indicate the cabinet temperature. Proofer and holding cabinet shall be mounted on castors, with two rigid castors
at rear and two swivel castors dual swivel and wheel lock and front. Proofer and Holding Cabinets shall be fitted with NEMA 5-20P cordsets. Unit shall be supplied in 100%
recyclable shipping packaging.
E32D5 / P12M
E32D5 Full Size Digital / Electric Convection Oven
P12M Full Size Manual / Electric Proofer/Holding Cabinet
www.moffat.com
SPECIFICATIONS
Electrical Requirements
Oven (E32D5)
208V, 60Hz, 1-phase, 5.8kW, 28A
220-240V, 50/60Hz, 1-phase, 6.5W, 27A
No cordset supplied
CONSTRUCTION - Oven (E32D5)
Porcelain enameled fully welded oven chamber
Stainless steel front, sides and top exterior
Stainless steel frame side hinged door
0.2” / 5mm thick door inner and outer glass
Stainless steel control panel
Aluminized coated steel base and rear panels
U.S.A.
Moffat Inc
3765 Champion Boulevard
Winston-Salem
Proofer (P12M)
110-120V, 50/60Hz, 1-phase, 1.95kW, 15.6A
NEMA 5-20P cordset fitted
CONSTRUCTION - Proofer (P12M)
304 stainless steel interior cabinet
Stainless steel front, sides and top exterior
Stainless steel interior side racks
Stainless steel frame side hinged door
0.2” / 5mm thick door glass
Stainless steel control panel
Aluminized coated steel base and rear panels
North Carolina 27105
Water Requirements
Cold water connection ¾” GHT male
80psi maximum inlet pressure / 20psi minimum inlet pressure
Connection to oven optional
CONTROLS - Oven (E32D5)
Electronic controls with Digital Time and Temperature display,
Manual or Program modes
Large ¾” / 20mm high LED displays
Two individual time and temperature setting control knobs
ON/OFF key.
Oven Lamp key (toggle or auto-time off mode settings)
Timer Start/Stop key
Water Injection key (manual shot or timed shot mode settings)
Programs select key
Actual temperature display key
Adjustable buzzer/alarm volume Thermostat range 150-500°F / 50-260°C
Timer range from 180 minute in countdown mode /
999 minute in count-up mode
Over-temperature safety cut-out
CONTROLS - Proofer (P12M)
Off / Proof / Holding mode selector switch
Mechanical thermostat 32-185°F / 20-85°C
Humidity level control
Cabinet temperature thermometer
Auto-fill water system standard
CLEANING
Stainless steel top and side exterior panels
Porcelain enameled oven chamber
Fully removable stainless steel oven and proofer side racks
Removable stainless steel oven fan baffle
Easy clean door system with hinge out door inner glass
(no tools required)
Removable plug-in oven door seal (no tools required)
External Dimensions
Width 287/8” / 735mm
Height 69” / 1775mm
Depth
317/8” / 810mm
Ph Toll Free 1-800-551 8795
Ph 336-661 0257
Fax 336-661 9546
Email [email protected]
www.moffat.com
Nett Weight
Oven (E32D5)
196lbs / 89kg
Proofer (P12M)
194lbs / 88kg
Packing Data
Oven (E32D5)
231lbs / 105kg
20.1ft³ / 0.57m3
Width 297/8” / 760mm
Height
32” / 665mm
Depth
363/8” / 925mm
Proofer (P12M)
236lbs / 107kg
32.1 ft³ / 0.91m3
Width 30” / 760mm
Height
51” / 1295mm
Depth
363/8” / 925mm
INSTALLATION CLEARANCES
Rear
2” / 50mm
LH Side
2” / 50mm
RH Side* 3” / 75mm
* For fixed installations a minimum of 20” / 500mm is required for service
CLEARANCE FROM SOURCES OF HEAT
A minimum distance of 12” / 300mm from the appliance sides is required
Manufactured by:
Moffat Limited
16 Osborne Street PO Box 10-001
735 mm / 287 8"
65 mm / 2 8"
5
810 mm / 317 8"
VENT
381 mm / 15"
306 mm / 12"
ELECTRICAL
ENTRY
25 mm / 1"
100 mm / 37 8"
VENT
Christchurch 8081 New Zealand
ISO9001
Quality
Management
Standard
Designed and manufactured by
WATER INLET
575 mm / 225 8"
80 mm / 31 8"
1231 mm / 481 2"
1135 mm / 443 4"
1035 mm / 403 4"
283 mm / 111 8"
ISO9001
All Turbofan products are designed and
manufactured by Moffat using the
internationally recognised ISO9001
quality management system, covering
design, manufacture and final inspection,
ensuring consistent high quality at all times.
ELECTRICAL
ENTRY
In line with policy to continually develop
and improve its products, Moffat Limited
reserves the right to change specifications
and design without notice.
120 mm / 43 4"
1775 mm / 697 8"
WATER INLET
© Copyright Moffat Ltd
Moffat 1270 / 3.12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement