P8M DOUBLE STACKED Full Size Manual / Electric Proofer/Holding Cabinet

P8M DOUBLE STACKED Full Size Manual / Electric Proofer/Holding Cabinet
P8M/2
TECHNICAL DATA SHEET FOR
P8M DOUBLE STACKED
Full Size Manual / Electric Proofer/Holding Cabinet
Double Stacked on a Stainless Steel Base Stand
P8M/2 - Double stack
DOUBLE STACK FEATURES
• Two 8 full size sheet pan capacity
• Two 16 half size sheet pan capacity
• Compact 287/8” / 735mm width • Full stainless steel spacer frame
PROOFER/HOLDING CABINET FEATURES (each)
• Dual function Proofer and Holding Cabinet
• 8 full size sheet pan capacity
• 16 half size sheet pan capacity
• 3”/ 76mm tray spacing
• 110-120V plug-in
• 15A NEMA 5-15P cordset fitted
• Full double skin construction
• Auto water fill system with optional integrated water filter kit • Continuous door seal
• Side hinged door (standard LH hinge). Optional RH hinge
(field convertible)
• Off / Proof / Hold mode selection
• Low velocity circulation fan system
• Mechanical thermostat
• Humidity level control • Dual halogen cabinet interior lamps
• Cabinet temperature display thermometer
ACCESSORIES
• Optional 3M Cuno water filter kit complete with cartridge
and connection fittings
• Installs in pre-fitted rear housing of cabinet for flush
rear installation
P8M/2
P8M units shall be Moffat electrically heated Turbofan Proofer and Holding Cabinets ETL Listed and NSF-4 listed. The proofer and holding cabinets shall have double
skin construction with stainless steel interior and exterior sides, front and top. Doors shall be side hinged and field reversible. Units shall have capacity for up to 16
half size sheet pans or 8 full size sheet pans. A single speed fan shall gently and evenly circulate air around the cabinet. Cabinets shall be controlled by a mechanical
thermostat and humidity via a control of the water tank, thermometers shall indicate the cabinet temperature. Proofer and Holding Cabinets shall be fitted with
NEMA 5-15P cordsets. The proofer and holding cabinets shall be double stacked using Double Stacking Kit DSKP8. Units shall be supplied in 100% recyclable shipping
packaging.
Double stack models are supplied as two individual proofer and holding cabinets and a double stacking kit for field assembly.
P8M/2
P8M/2 Full Size Manual / Electric
Proofer/Holding Cabinet
SPECIFICATIONS
Electrical Requirements (each proofer)
110-120V, 50/60Hz, 1-phase, 1.45kW, 11.6A
NEMA 5-15P cordset fitted
CONSTRUCTION- PROOFERS
304 stainless steel interior cabinet
Stainless steel front, sides and top exterior
Stainless steel interior side racks
Stainless steel frame side hinged door
0.2” / 5mm thick door glass
Stainless steel control panel
Aluminized coated steel base and rear panels
www.moffat.com
Water Requirements (optional)
Cold water connection ¾” GHT male
80psi maximum inlet pressure / 20psi minimum inlet pressure
Winston-Salem
North Carolina 27105
Ph Toll Free 1-800-551 8795
Proofer Internal Dimensions (each proofer)
Width
18¼”/ 465mm
Height
28¾” / 730mm
Depth
27½” / 700mm
Volume 8.5ft³ / 0.24m3
CONTROLS (each proofer)
Off / Proof / Holding mode selector switch.
Mechanical thermostat 65-185°F / 20-85°C
Air heating ON control panel indicator
Humidity level control
Humidity tank ON control panel indicator
Cabinet temperature thermometer
Auto-fill water system standard
Moffat Inc
3765 Champion Boulevard
External Dimensions
Width 287/8” / 735mm
Height 70½” / 1792mm
Depth
317/8” / 810mm
CONSTRUCTION - DOUBLE STACKING KIT
All stainless steel construction
Stainless steel spacer frame
U.S.A.
Ph 336-661 0257
Fax 336-661 9546
Email [email protected]
www.moffat.com
Nett Weight (double stack complete)
361lbs / 164kg
Packing Data (P8M proofers each)
201lbs / 95.3kg
26.8 ft³ / 0.76m3
Width 30” / 760mm
Height
42½” / 1080mm
Depth
363/8” / 925mm
CLEANING
Stainless steel top and side exterior panels
Stainless steel interior chamber
Easy access to all interior surfaces
Fully removable stainless steel rack support
Removable humidity water tank (no tools)
Packing Data (Stacking Kit)
15lbs / 7kg 4.1ft³ / 0.12m3
Width 303/8” / 770mm
Height
35” / 890mm
Depth
63/4” / 170mm
Double Stacking Kits
For after market double stacking two P8M
proofer/holding cabinets
DSKP8 - Double stacking kit
INSTALLATION CLEARANCES
Rear
0“ / 0mm
LH Side
0“ / 0mm
RH Side
1” / 25mm
CLEARANCE FROM SOURCES OF HEAT
A minimum distance of 12” / 300mm from the appliance sides is required
Manufactured by:
735 mm / 287 8"
810 mm / 317 8"
Moffat Limited
16 Osborne Street PO Box 10-001
WATER
CONNECTION
25 mm / 1"
104 mm / 41 8"
Christchurch 8081 New Zealand
ISO9001
Quality
Management
Standard
ELECTRICAL
ENTRY
283 mm / 111 8"
136 mm / 53 8"
120 mm / 4 4"
820 mm / 321 4"
ELECTRICAL
ENTRY
575 mm / 225 8"
WATER
CONNECTION
82 mm / 31 4"
3
1698 mm / 667 8"
999 mm / 393 8"
1162 mm / 453 4"
1792 mm / 70 1 2"
Designed and manufactured by
ISO9001
All Turbofan products are designed and
manufactured by Moffat using the
internationally recognised ISO9001
quality management system, covering
design, manufacture and final inspection,
ensuring consistent high quality at all times.
In line with policy to continually develop
and improve its products, Moffat Limited
reserves the right to change specifications
and design without notice.
© Copyright Moffat Ltd
Moffat 1270 / 3.12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement