T2202D_PPG_US_Cover.fm Page 1 Tuesday, July 20, 2004 4:19 PM
Photo Printing Guide
The following ink tank is compatible with DS700.
For details on ink tank replacement, refer to “Replacing an Ink Tank” in this guide.
QA7-3336-V01
XXXXXX
©CANON INC.2004
PRINTED IN THAILAND
T2202D_PPG_US_Cover.fm Page 2 Tuesday, July 20, 2004 4:19 PM
Exif Print
This printer supports Exif 2.2 (also called “Exif Print”).
Exif Print is a standard for enhancing the communication between digital cameras and printers. By connecting
to an Exif Print-compliant digital camera, the camera’s image data at the time of shooting is used and
optimized, yielding extremely high quality prints.
International ENERGY STAR® Program
As an ENERGY STAR® Partner, Canon Inc. has determined that this product meets the ENERGY STAR
guidelines for efficiency.
The International ENERGY STAR® Office Equipment Program is a global program that promotes
energy saving through the use of computer and other office equipment.
The program backs the development and dissemination of products with functions that effectively reduce
energy consumption. It is an open system in which business can participate voluntarily. The targeted products
are office equipment such as computers, monitors, printers, faxes and copiers.
Their standards and logos are uniform among participating nations.
Power Requirements
Never use a power supply voltage other than that supplied in the country of purchase. Using the incorrect
voltage could cause a fire or electric shock. The correct power supply voltages and frequencies are as follows:
AC 110-120 V, 50/60 Hz
AC 220-240 V, 50/60 Hz
Trademark Notices
• Canon is a registered trademark of Canon Inc.
• BJ and SELPHY are trademarks of Canon Inc.
• Microsoft® and Windows® are registered trademarks of Microsoft Corporation in the U.S. and other
countries.
• Apple, Mac, Macintosh are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.
• Compact Flash is a trademark of SanDisk Corp.
• Microdrive is a trademark of IBM Corp.
• Memory Stick, MagicGate Memory Stick, Memory Stick PRO and Memory Stick Duo are trademarks of Sony
Corp.
• SD (Secure Digital) Memory Card is a trademark of Toshiba Corp., Matsushita Electric Industrial Co., Ltd,.
and SanDisk Corp.
• miniSD Card is a trademark of SD Association.
• MultiMediaCard is a trademark of Infineon Technologies AG.
• SmartMedia is a trademark of Toshiba Corp.
• xD-Picture Card is a trademark of Fuji Photo Film Co., Ltd.
• All other trademarks and registered trademarks appearing in this Quick Start Guide are the property of their
respective owners.
Copyright© 2004 CANON INC.
All rights reserved. No part of this publication may be transmitted or copied in any form whatsoever without the
express written permission.
Contents
Easy Setup Instructions..................................................................................3
Unpack the Printer ........................................................................................................3
Preparing the Printer.....................................................................................................4
Installing the Print Head ...............................................................................................5
Installing an Ink Tank ....................................................................................................6
Printer Parts and Their Function......................................................................7
Printer ..........................................................................................................................7
Buttons on the Remote Control......................................................................................8
Menu Screen...............................................................................................................11
Preparation When Using the Printer with the TV............................................13
Displaying a Photo on TV.............................................................................................13
Using a Memory Card ..................................................................................................15
Loading Paper.............................................................................................................18
Enjoy Photos on TV and Printing —Basic— ...................................................21
Viewing and Printing from the TV Overview .................................................................21
Enjoy Photos on TV and Printing —Advanced—.............................................26
Selecting Various Print Option—Print Studio—............................................................26
Handy Functions and Settings.....................................................................................33
Printing Photographs Directly from a Digital Camera ....................................39
Connecting to a Digital Camera ...................................................................................39
Direct Printing from PictBridge-compatible Digital Cameras ........................................41
Printing Photographs Directly from a Canon Bubble Jet Direct Compatible
Digital Camera ............................................................................................................43
Printing Photos with Infrared Compatible Mobile Phones .............................44
Requirements for Infrared Communication with the Mobile Phone...............................44
Setting the Media Type, Page Size, and Layout............................................................44
Performing Infrared Printing........................................................................................46
Printing with the computer...........................................................................49
Installing the Printer Driver .........................................................................................49
How to View the User’s Guide......................................................................................54
Printing Maintenance ...................................................................................55
When Printing Becomes Faint or Colors are Incorrect ...................................................55
Replacing an Ink Tank .................................................................................................60
1
Troubleshooting...........................................................................................64
Nothing is Displayed on TV/Image is Poor ...................................................................64
The Remote Control is not Working..............................................................................65
A Message is Displayed on TV .....................................................................................65
Handling Error Messages ............................................................................................67
Paper Does Not Feed Properly .....................................................................................68
Printing is Blurred/Colors are Wrong/White Streaks appear ........................................69
Printed Surface is Scratched or Ink Blots.....................................................................70
Printer Does Not Start or Printer Stops During Print Jobs .............................................72
Cannot Print Properly from the Digital Camera.............................................................73
Cannot Install the Printer Driver ..................................................................................75
Appendix .....................................................................................................76
Specifications .............................................................................................................76
Safety Precautions......................................................................................................78
Regulatory Information ...............................................................................................80
Introduction
This Photo Printing Guide uses the following symbols to indicate important information.
Always observe the instructions indicated by these symbols.
Instructions that, if ignored, could result in death or serious personal injury
caused by incorrect operation of the equipment. These must be observed for
safe operation.
Instructions that, if ignored, could result in personal injury or material damage
caused by incorrect operation of the equipment. These must be observed for
safe operation.
Also read the Safety Precautions. Observe the warnings and cautions to avoid
personal injury or damage to the printer.
2
Easy Setup Instructions
Easy Setup Instructions
Unpack the Printer
Check that all the following items are in the box. If anything is missing or is
damaged, contact a Canon service representative.
Power Cord
Video Cable (RCA)
Documentation and Setup Software &
User’s Guide CD-ROM
Ink Tank
BCI-16 Color
Remote Control
Printer
Lithium coin
cell battery
Print Head
note
See “Using the Remote Control” on page 9 for instructions on setting the lithium coin
cell battery in the remote control.
3
Easy Setup Instructions
Preparing the Printer
1
Place the printer on a flat surface.
*
Important
* During printing, part of the sheet is ejected
from the back of the printer.
Leave at least 8cm (3.1in), clear space at the
back of the printer.
2
Remove the tape from the printer.
The tape position is subject to change.
3
4
Plug the power cord into the back of the printer and connect the other
end to a power outlet.
Press the POWER button. The printer will initialize.
Warning
• Never attempt to plug the power cord into the power outlet or unplug the power
cord when your hands are wet.
• Never damage, modify, stretch, or excessively bend or twist the power cord. Do not
place heavy objects on the power cord.
• Never use any power supply other than the standard power supply available in the
country of purchase. Using the incorrect voltage and frequency could cause a fire or
electric shock.
• Always push the plug all the way into the power outlet.
4
Easy Setup Instructions
Installing the Print Head
1
Slide the cover open switch toward
the right to open the cover.
The print head holder moves to the
center.
2
Press the lock button, then raise
the lock lever.
Do not touch internal parts other than
the lock lever.
3
Remove the protective cap from the
print head.
note
• Do not touch the print head nozzles.
• Do not attempt to reattach the
protective cap once it has been
removed.
print head nozzles
4
Place the print head in the holder.
print head
print head holder
5
Easy Setup Instructions
5
Lock the print head into place by
lowering the lever.
Press down the lock button until it
clicks.
Do not touch the lock lever once the
print head has been installed.
Installing an Ink Tank
Caution
• For safety reasons, store an ink tank out of the reach of small children.
• Do not drop or shake an ink tank as this may cause the ink to leak out and stain your
clothes and hands.
1
2
Ink ports
Take out the ink tank.
Hold the ink tank as shown in the
diagram and remove the protective
cap.
note
• Do not touch the ink port.
• Do not attempt to reattach the protective
cap once it has been removed.
3
4
5
Insert the ink tank slant into the
slot aligning the X mark with the W
mark.
Press the
place.
until it clicks into
Close the cover.
note
Wait until the preparatory operation is
complete: it takes about 80 seconds.
6
Printer Parts and Their Function
Printer Parts and Their Function
This section describes the components of the printer, the remote control and the
menus displayed when using the printer with a TV.
Printer
„ Front View
Remote control receiver/
Infrared port
Receives the button
signal from the remote
control or data sent from
the mobile phone via
infrared communication.
Cover
Open to replace the
ink tank or remove
jammed paper.
Direct Print Port
Connects the printer to a
digital camera or digital
video camcorder. For
instructions, See
“Printing Photographs
Directly from a Digital
Camera” on page 39.
„ Operation Panel
Card Slot
Set the memory card from a digital
camera here. For instructions, See
“Using a Memory Card” on page 15.
Indicator Lamp
This lamp will turn
on when the memory
card is set. It will
blink while reading
or writing from the
card.
Paper Output Tray
The printed paper will
be ejected.
Paper Support
Open and pull out before printing to
support paper.
Auto Sheet Feeder
Load paper here.
Paper Guide
When loading paper, ensure that the left edge
just touches this guide.
Print All Button
Prints each of all photos.
See “How to Print All Photos without Connecting to TV” on page 30.
RESUME/CANCEL Button
Press to resume printing once an error has
been resolved. The printer will then initialize
ready for printing.
Also, to cancel printing in progress, press
this button.
POWER Button
POWER Lamp
Press to turn the printer on or off.
Off: the printer is turned off.
Green: the printer is ready to print.
Flashing green: the printer is preparing to print, or is currently printing.
Flashing orange: an error has occurred and the printer is not ready to print.
Flashing orange and green alternately: an error has occurred
that may require a service call.
7
Printer Parts and Their Function
„ Rear View
USB Port
Connects the printer to a computer through a
USB interface.
Power Cord Connection
Connector used to connect
the supplied power cord.
„ Inside the Printer
Video Out Terminal
Connects the printer to TV via the supplied
video cable.
Print Head Lock Lever
Locks the print head into the holder.
Once the print head is installed,
do not touch this lever.
Print Head Holder
Install the print head here.
Paper Thickness Lever
Move to the right when printing.
Move to the left if ink smudges or the printed
surface is stained.
See “Inappropriate paper type used” on page 70.
Cover open switch
Slide it toward the right to
open the cover.
Buttons on the Remote Control
„ The Function of Buttons on the Remote Control
(1) Power
Button
(2) S Button
(6) Copies [+][–]
Buttons
(2) WXButtons
(1) Power Button
Press to turn the printer on
or off.
note
Works as the POWER button
on the printer.
(2) T Button
(3) Back Button
(4) Search
Button
(5) Settings
Button
8
(7) OK Button
(8) Menu Button
(9) Rotate Button
(10) Zoom Button
(11) Cancel Button
(12) Print Button
(2) WXST Buttons
Press to select an item in
menus or options, or print
settings.
(3) Back Button
Allows you to return to the
previous step.
Printer Parts and Their Function
(4) Search Button
Looks up target photos in the memory card
using the shooting date as the search key.
See “Searching for Photos with the Shooting
Date—Search” on page 35.
(9) Rotate Button
Rotates the photo displayed on TV 90
degrees.
This button is effective even if you are
displaying a slide show, or zooming a photo.
(5) Settings Button
Allows you to set the Paper Size, Paper Type,
Bordered/Borderless printing, printing with
the date, etc. See “Specifying the Paper and
Other Settings” on page 33.
(10) Zoom Button
Press to enlarge or reduce the photo being
displayed.
(6) Copies [+][–] Buttons
Specifies the number of copies to print in
such as the print confirmation screen.
(7) OK Button
Allows you to make a selection. For example,
selecting a photo to be printed, selecting a
menu item or other setting.
(11) Cancel Button
Press to cancel the settings you have made.
If this button is pressed during printing, the
printer aborts printing.
(8) Menu Button
Displays menu options on TV.
(12) Print Button
Press to start printing according to the
settings displayed on TV.
„ Using the Remote Control
Operating the Remote Control
When you operate the remote control,
make sure of the following:
• Use the remote control within a
distance of approximately 13.1 feet/
4 m from the remote control receiver
on the printer.
13.1 feet/
4m
• Use the remote control within an angle
of 30 degrees from right to left or up
and down, aiming at the remote control
receiver on the printer.
9
Printer Parts and Their Function
note
Setting or Replacing the Battery
Set the battery in the remote control first.
Replace the battery in the remote control when the remote control becomes inoperative or its
effective range becomes shorter.
The lithium coin cell battery CR2025 is available for this remote control. Purchase the
commercial battery for replacement.
1 Remove the cover from the back of the
remote control.
2 Push down the battery stopper tab and
remove the battery from the remote
control.
3 Replace the new battery with its positive
(+) ends facing up.
4 Replace the cover.
note
Using the Remote Control
• The remote control may operate improperly if strong light such as sunlight or inverted
fluorescent light hits the remote control receiver.
Keep the remote control away more than 19.69inch/50cm from inverted fluorescent light.
• Do not drop or apply strong impact on the remote control.
• Keep out of direct sunlight, high temperature, and fire.
• Do not disassemble or modify the remote control.
• Do not handle the remote control with wet hands.
note
Using a Battery
• The lithium coin cell battery CR2025 is available for this remote control.
• Do not use other types of battery.
• Place the battery with its positive (+) ends facing up. Never place the battery with its
negative (–) end facing up.
• Remove the battery from the remote control if it will not be used for a long period of time.
• See “Safety Precautions” on page 78 for additional cautions.
CLASS1 LED PRODUCT
10
Printer Parts and Their Function
Menu Screen
The following menu can be selected when a memory card is inserted in the memory
card slot and the printer and the TV are connected.
You can select the following functions in each menu.
Photo Gallery
View each photo and print.
You can automatically display photos (slide
show) on the full TV screen.
See “Viewing Each Photo on TV and
Printing—Photo Gallery” on page 21.
Photo Print
Select photos and specify the number of copies
to print.
See “Specifying the number of copies to print
for each photo —Photo Print” on page 24.
Layout print
Print Studio
Select to display
the following menus.
Prints the specified photo in the specified layout
(Borderless or Bordered ×2/×4/×8/half).
See “Specifying the Layout” on page 26.
Sticker print
Prints stickers from a favorite photo.
See “Printing Stickers from a Favorite Photo” on
page 28.
Print all
Prints all photos.
See “Printing All Photos” on page 30.
Print index
Prints an index of all photos.
See “Printing a Photo List—Print Index” on page 31.
DPOF print
Prints according to the DPOF settings, if
available.
See “Printing According to the settings Made on
the Camera —DPOF Printing” on page 32.
11
Printer Parts and Their Function
Tool Box
Displays the following menus.
Nozzle check
Prints a nozzle check pattern to ensure that
ink is output correctly.
See “Printing the Nozzle Check Pattern” on
page 56.
Ink counter reset
Resets the ink counter so that it is correctly
synchronized with the actual ink level when
the ink tank is replaced.
See “Resetting the Ink Counter” on page 62.
Head cleaning
Cleans the print head when nozzles are
clogged.
See “Print Head Cleaning” on page 57.
Date display format
Changes the format of date printing.
See “Setting the Date Display Format” on
page 36.
Deep cleaning
If print quality does not improve after
standard head cleaning, use Deep Cleaning.
See “Print Head Deep Cleaning” on page 58.
Color adjust
Adjusts the brightness, contrast and color
hue of the photo at printing.
See “When the color is different from what
is displayed on the TV or when it is not
printed with your favorite color” on page 69.
Head alignment
Align the print head.
See “Aligning the Print Head” on page 59.
Head alignment print
Prints the current settings of the print head
position.
See “Printing the current setting of the print
head position” on page 60.
Display photo received via infrared
Specifies whether to display a photo on TV
when it is sent from a mobile phone via the
infrared communication.
See “Printing a Photo by Displaying it on TV”
on page 47.
Remaining ink level indicator setting
Specifies whether to display the remaining
ink level in the print confirmation screen.
See “Accompanied by ink tank icon with '?'”
on page 66.
Infrared print
Selects media type and layout when you
print a photo sent from a mobile phone via
the infrared communication.
See “Setting the Media Type, Page Size, and
Layout” on page 44.
Ink drying wait time
Sets time to dry ink on the printing surface.
Set longer time in case print surface
becomes dirty.
See “Sets time to dry ink on the printing
surface.” on page 71.
Reset
Returns the settings other than languages
and the print head position to the factory
settings.
See “Resetting All Settings” on page 38.
Languages
Sets the language displayed on TV.
See “Changing the Language Displayed” on
page 37.
12
Preparation When Using the Printer with the TV
Preparation When Using the Printer
with the TV
Displaying a Photo on TV
This section describes the method to connect the printer to the TV with the attached
video cable (RCA) and to turn on/off the printer and TV.
„ Connecting to TV
1
Check the following before connecting the printer to the TV.
• Both the printer and the TV are turned off.
• A battery is installed in the remote control.
See “Using the Remote Control” on page 9.
• Print head and ink tank are installed in the printer.
See “Easy Setup Instructions” on page 3.
2
Connect TV to the printer.
(1) Ensure that the printer is turned off and connect the
attached video cable to the video out terminal
(2) Ensure that the TV is turned
off and connect the
attached video cable to the
video input terminal.
note
See the TV manual for the location of the video input terminal and the instruction on
selecting the video input.
13
Preparation When Using the Printer with the TV
„ Turning on TV and the Printer for Displaying the Menu Screen
Follow the procedure below to turn on TV and the printer.
1
Connect to TV.
See “Connect TV to the printer.” on page 13.
2
Turn on TV and the printer.
(1) Turn on TV.
(2) Press the POWER button.
The POWER lamp flashes while the printer warms
up and changes to steady (non-flashing) green
when the printer is ready.
(3) Select the video input mode.
The menu screen appears on the TV screen.
See “Viewing Each Photo on TV and Printing—Photo Gallery” on page 21 for the
instruction on selecting among menus and displaying a photo stored in a memory card.
note
• You can turn the printer on by pressing the POWER button on the remote control.
• If the POWER lamp changes to orange and begins flashing, refer to the section
“Handling Error Messages” on page 67.
„ Turning off TV and the printer
Follow the procedure below to turn off TV and the printer.
1
Check the following before turning off TV and the printer.
• The Indicator lamp of the memory card is not flashing.
* Data in the memory card may be damaged if you remove the memory
card or turn off the printer when the Indicator lamp is flashing.
• The POWER lamp is not flashing in green.
• The printer is not printing.
2
Turn off TV and the printer.
(1) Turn off the printer by pressing the POWER button.
note
• You can also turn off the printer by pressing
the POWER button on the remote control.
• Before unplugging the power cord, turn off
the printer and ensure that the green lamp
has gone out.
(2) Turn TV off.
(3) Unplug the connected video cable.
* Unplug the video cable after turning off TV and the printer.
14
Preparation When Using the Printer with the TV
Using a Memory Card
Let's take a look at different types of memory cards and how to insert and remove
them.
„ Memory Cards Supported by this printer
Supported memory cards are as follows:
Memory Cards which can be inserted
directly
Memory Cards which can be used
through a special adapter
• CompactFlash (CF)
card
• Microdrive
* Supports TYPE I/
TYPE II (3.3V)
• xD-Picture Card
• Memory Stick
• Memory Stick PRO
• MagicGate Memory
Stick
• Memory Stick Duo
• Memory Stick PRO Duo
• MagicGate Memory Stick Duo
*1
*2
• SD Memory Card
• Multimedia Card
• miniSD Card
• SmartMedia
* Supports 3.3V
card only (1 MB
and 2 MB cards
not supported)
*1
*2
*2
Purchase the Compact Flash Card Adapter for
xD-Picture Card separately.
Use the special adapter supplied with the
card.
Important
• This printer supports JPEG (DCF/CIFF/Exif 2.21 or earlier/JFIF), TIFF (Exif compliant),
and DPOF (Ver. 1.00 compliant).
• Photos stored in a memory card not supported by the digital camera may fail in
loading or be damaged. For types of memory cards supported by the digital camera,
refer to your digital camera user’s manual.
• Use the digital camera to format a memory card. Memory card data formats may not
be compatible with computer-specific formats.
• Images edited on the computer may result in improper printing.
15
Preparation When Using the Printer with the TV
„ Inserting a Memory Card
Important
Insert only a single type of memory card.
• If you use a Compact Flash (CF) card or Microdrive
Insert it as far as it will go into the slot on the right as shown.
Turn on
* For xD-Picture Card, use the compliant adapter.
• If you use a SmartMedia card
Insert it into the slot on the upper left until it stops with its end projecting
as shown.
Turn on
• If you use a Memory Stick/Memory Stick PRO/Magic Gate Memory Stick
Insert it into the slot on the lower left until it stops with its end projecting
as shown.
Turn on
* For Memory Stick Duo/Memory Stick PRO Duo/MagicGate Memory Stick Duo, use
the special adapter.
• If you use an SD card or Multimedia card
Insert it into the slot on the lower left until it stops with its end projecting
as shown.
Turn on
* For a miniSD Card, use the special adapter.
16
Preparation When Using the Printer with the TV
„ Removing a Memory Card
note
If you use the printer connected to your computer, follow the instructions for removal
of the memory card from the computer. For the procedure, refer to the on-screen User’s
Guide.
1
Ensure that the Indicator lamp is not flashing, then remove the memory
card.
Important
Removing the memory card or turning off the printer while the Indicator lamp is
flashing can damage the data stored in the memory card.
• If you use CompactFlash (CF) card/Microdrive/xD-Picture card
Ensure that the Indicator lamp is not flashing, then press the card eject
button to remove the memory card.
Card eject button
Indicator lamp
• If you use other cards
Ensure that the Indicator lamp is not flashing, then hold the exposed
portion of the memory card with your fingers to remove the memory card.
17
Preparation When Using the Printer with the TV
Loading Paper
„ Print Media to Avoid
Do not use the following types of paper. Using such paper will not only
produce unsatisfactory results, but can also cause the printer to jam or
malfunction.
•
•
•
•
Folded, curled or wrinkled paper
Damp paper
Paper that is too thin (less than 64 gsm or 17 lb)
Paper that is too thick* (more than 105 gsm or 28 lb)
* non-Canon branded paper
• Picture postcards
• Postcards with an affixed photo or sticker
„ Loading the Print Media
note
Refer to “Media Types for Card Direct Printing” on page 20 for compatible paper.
1
Turn on the printer.
(1) Press the POWER button.
(2) Open the paper support.
2
Flatten the four corners of the paper before loading it.
note
If paper is curled, gently bend the corners in the opposite direction until the paper
becomes completely flat.
18
Preparation When Using the Printer with the TV
3
Prepare to load paper.
(1) Slide the cover open switch toward the right to open the cover.
(2) Ensure that the paper thickness lever is set to
the right.
note
Set the lever on the left only if ink smudges or
the printed surface is stained.
(3) Close the cover.
4
Load the paper.
(1) Insert the paper into the paper support with print side
facing up.
When loading the credit card sized paper, load sheets
in the portrait position (feed from the short side)
*
Important
(3) Slide the paper guide
against the left side
of the stack of paper.
• 101.6 × 152.4mm/
4"×6" paper
* During printing, part of sheet is
ejected from the back of the
printer.
Leave at least 8cm (3.1 in) clear
space at the back of the printer.
(2) Align the paper with the right edge of the paper
support and insert the paper until it is fully inserted.
• Photo stickers
Shorter margin
note
• Do not stack more than 10 sheets in the paper output tray.
• Do not touch the printed surface until the ink dries. For specific drying times, refer
to the instructions packaged with your media.
19
Preparation When Using the Printer with the TV
„ Media Types for Card Direct Printing
Media Type
Photo Paper Pro
Paper support
Load Limit
Page size
Media type
101.6×152.4 mm/
[101.6×152.4 mm]/ [Photo Paper Pro]
4"×6": up to 20 sheets [4"×6"]
Photo Paper Plus 101.6×152.4 mm/
[101.6×152.4 mm]/ [Photo Paper Plus
Glossy
4"×6": up to 20 sheets [4"×6"]
Glossy]
Photo Paper Plus 101.6×152.4 mm/
[101.6×152.4 mm]/ [Photo Paper Plus
Semi-gloss
4"×6": up to 20 sheets [4"×6"]
Glossy]
Glossy Photo
Paper
101.6×152.4 mm/
[101.6×152.4 mm]/ [Glossy Photo Paper]
4"×6": up to 20 sheets [4"×6"]
Credit Card:
up to 20 sheets
[Credit Card]
[Glossy Photo Paper]
Matte Photo
Paper
101.6×152.4mm/
[101.6×152.4mm]/ [Matte Photo Paper]
4"×6": up to 20 sheets [4"×6"]
Photo Stickers
101.6×152.4 mm/
4"×6": up to 1 sheet
—*
—
* Select Sticker print from Print Studio when you print. See “Printing Stickers from a
Favorite Photo” on page 28.
You can print a photo taken with a mobile phone by selecting Sticker as the paper
size in Infrared print. See “Printing on Photo Stickers” on page 45.
note
For instructions on how to display and set these settings, See “Specifying the Paper
and Other Settings” on page 33.
20
Enjoy Photos on TV and Printing —Basic—
Enjoy Photos on TV and Printing
—Basic—
Viewing and Printing from the TV Overview
You can display photos stored in a memory card on TV by connecting printer and TV
and inserting the memory card in the printer. You can print your favorite photos one
by one, or display a list of the photos and specify the number of copies to print for
each photo listed.
„ Viewing Each Photo on TV and Printing—Photo Gallery
note
Displays photos stored in a memory card on TV.
You can display one photo at a time or display photos automatically (slide show).
1
Connect the printer to TV.
See “Connect TV to the printer.” on page 13.
2
Turn on TV and the Printer and display the Menu Screen.
See “Turning on TV and the Printer for Displaying the Menu Screen” on page
14.
(1) Turn TV on.
(2) Turn on the printer.
(3) Select the video input mode.
The menu screen appears on the TV screen.
note
The Menu screen is displayed when TV and the printer are connected and turned on.
Change the language displayed on the Menu screen.
* See “Changing the Language Displayed” on page 37.
3
Loading the Paper.
See “Loading Paper” on page 18.
4
Install the memory card in the card slot.
See “Inserting a Memory Card” on page 16.
The menu screen is displayed.
21
Enjoy Photos on TV and Printing —Basic—
note
Menu Screen
The Menu screen is displayed when TV and the printer are connected and turned on.
Tool Box is the only available menu at the moment. All menu options can be viewed
when a memory card with stored photos is inserted into the printer card slot.
Press the Menu button to display the Menu screen if the other screen is displayed.
• The menu displayed when the
power is on.
• The menu displayed when a
memory card is set.
The number of
photos stored in
the memory card.
5
Select Photo Gallery.
(1) Use the WX buttons to select
Photo Gallery.
(2) Press the OK button.
The stored photo is displayed
on TV.
(3) Press the X button and the W
button to display the next
photo and the previous photo,
respectively.
6
Select the photo to print.
(1) Using the WX buttons, select
the image to print.
(2) Press the Print button.
The print confirmation screen
is displayed.
note
When many photos are stored in a memory card, it is convenient to search for photos
to display or print using the shooting date as the search key.
See “Searching for Photos with the Shooting Date—Search” on page 35.
22
Enjoy Photos on TV and Printing —Basic—
7
Confirm the settings.
(1) Confirm the Page size and Media type.
To change any of the settings, press the Settings button.
See “Specifying the Paper and Other Settings” on page 33.
(2) Press the Copies +/Copies –
buttons to specify the
number of copies to print.
8
Start printing.
(1) Ensure that the paper is loaded in the print confirmation screen.
(2) Press the Print button.
note
Displaying Photos Automatically at the Full TV Screen—Slide Show
You can automatically display photos stored in a memory card at the full TV screen.
1 Start a photo gallery to
display photos stored in
a memory card.
2 Press the OK button.
The confirmation
message is displayed.
3 Select Yes and then
press the OK button.
The slide show is started
and the photos are
switched automatically
at a certain interval.
Press the OK button to
stop switching photo
during the slide show.
Press the OK button
again to restart the slide
show.
4 Press the Cancel button
or the Back button.
It stops the slide show
and returns to the Photo
Gallery screen.
23
Enjoy Photos on TV and Printing —Basic—
„ Specifying the number of copies to print for each photo
—Photo Print
You can display 9 photos stored in a memory card on the TV screen at a time
and specify the number of copies to print for each photo.
1
Prepare to print.
(1) Connect TV to the printer and turn them on.
See “Connect TV to the printer.” on page 13.
(2) Load the paper
See “Loading Paper” on page 18.
(3) Insert the memory card into the card slot.
See “Inserting a Memory Card” on page 16.
The menu screen is displayed.
Press the Menu button if the screen other than the menu screen appears on the
screen.
2
Select Photo Print.
(1) Use the WX buttons to select
Photo Print.
(2) Press the OK button.
The screen for specifying the
number of images is displayed.
24
Enjoy Photos on TV and Printing —Basic—
3
Specify the number of copies to print.
(1) Use the WXST buttons,
select the photo you wish to
print.
(2) Use the Copies +/Copies –
buttons to specify the number
of copies to print.
(3) Repeat steps 1 and 2 and
specify the number of copies
for each photo you wish to
print.
(4) Press the Print button.
The print confirmation screen
is displayed.
Number of copies
to print
note
• Place the cursor on the Cancel all, Previous, or Next button displayed at the bottom
of the screen and press the OK button to:
Cancel all
Reset the specify the number of copies to print for
all photos.
<< Previous
Display the previous page if more than 10 photos
are stored in the memory card.
Next >>
Display the next page if more than 10 photos are
stored in the memory card.
• When many photos are stored in a memory card, it is convenient to search for
photos to display or print using the shooting date as the search key.
See “Searching for Photos with the Shooting Date—Search” on page 35.
4
Start printing.
(1) Confirm the Page size and
Media type.
To change any of the settings,
press the Settings button.
See “Specifying the Paper and
Other Settings” on page 33.
(2) Ensure that the paper is loaded
in the print confirmation
screen.
(3) Press the Print button.
The specified number of copies
for each image will be printed.
25
Enjoy Photos on TV and Printing —Advanced—
Enjoy Photos on TV and Printing
—Advanced—
Selecting Various Print Option—Print Studio—
You can print your favorite photo as a postcard or sticker using Print Studio
features.
•
•
•
•
•
“Specifying the Layout” on page 26
“Printing Stickers from a Favorite Photo” on page 28
“Printing All Photos” on page 30
“Printing a Photo List—Print Index” on page 31
“Printing According to the settings Made on the Camera —
DPOF Printing” on page 32
„ Specifying the Layout
You can print photos using one of the following layout options: Borderless or
Bordered (×2/×4/×8/half).
Photo×2
Photo×4
Photo×8
Half
Borderless
Bordered
1
Prepare to print.
(1) Connect TV to the printer and turn them on.
See “Connect TV to the printer.” on page 13.
(2) Load the paper.
See “Loading Paper” on page 18.
(3) Insert the memory card into the card slot.
See “Inserting a Memory Card” on page 16.
The menu screen is displayed.
Press the
(Menu button) if the screen other than the menu screen appears on
the screen.
26
Enjoy Photos on TV and Printing —Advanced—
2
Select Layout print.
(1) Use the
buttons to select Print Studio.
(2) Press the
button.
The menu of Print Studio is displayed.
(3) Use the
buttons to select Layout print
and then press the
button.
The screen for specifying the layout is
displayed.
3
Specify the layout.
(1) Use the
buttons to specify the layout.
(2) Press the
button.
The screen for specifying the paste method is
displayed.
4
Select the paste method.
(1) Use the
and
buttons to select the paste
method, and then press the
button.
Paste all
All the photos in the memory card are pasted
automatically in the selected layout.
Print confirmation screen is displayed. Proceed
to step 6.
Paste one by one
Paste photos one by one on the specified
layout. Proceed to step 5.
note
When many photos are stored in a memory card, it is convenient to search for photos
to display or print using the shooting date as the search key.
See “Searching for Photos with the Shooting Date—Search” on page 35.
27
Enjoy Photos on TV and Printing —Advanced—
5
Paste photos one by one.
(1) Press the
and
button to display the
photo you want to paste.
(2) Press the
button.
The photo is pasted on the layout.
Press the
(Back button) to cancel pasting
the specified photo.
(3) Repeat steps (1) and (2) for each photo you wish to print.
(4) Press the
(Print button).
The print confirmation screen is displayed.
note
You cannot paste photos on more than one page. Start printing once you have pasted
photos on one page.
6
Start Printing.
(1) Confirm the Page size and Media type.
To change any of the settings, press the
(Settings button).
See “Specifying the Paper and Other Settings”
on page 33.
(2) Press the
print.
(Copies +/Copies – buttons) to specify the number of copies to
(3) Press the
(Print button).
Printing the photos pasted on the specified layout is started.
„ Printing Stickers from a Favorite Photo
You can print your favorite photo on the Canon Photo Stickers.
Stickers ×16
28
Enjoy Photos on TV and Printing —Advanced—
1
Select Sticker print.
(1) Use the
buttons to select Print Studio
from the menu screen.
(2) Press the
button.
The menu of Print Studio is displayed.
(3) Use the
buttons to select Sticker print
and then press the
button.
The screen for specifying the layout is
displayed.
(4) When printing on the Canon Photo Stickers,
select Stickers x 16.
The screen for specifying the photo to print is
displayed.
2
Select the photo to print.
(1) Use the
buttons to select the photo
you wish to print.
(2) Press the
button.
The print confirmation screen is displayed.
note
When many photos are stored in a memory card, it is convenient to search for photos
to display or print using the shooting date as the search key.
See “Searching for Photos with the Shooting Date—Search” on page 35.
3
Start Printing.
(1) Confirm the Page size.
(2) Press the
print.
(Copies +/Copies – buttons) to specify the number of copies to
(3) Press the
(Print button).
Specified photo will be printed on the Photo Stickers.
29
Enjoy Photos on TV and Printing —Advanced—
„ Printing All Photos
You can print all photos saved on a memory card.
note
When many photos are stored in a memory card, it is convenient to search for photos
to display or print using the shooting date as the search key.
See “Searching for Photos with the Shooting Date—Search” on page 35.
1
Select Print all.
(1) Use the
buttons to select Print Studio
from the menu screen.
(2) Press the
button.
The menu of Print Studio is displayed.
(3) Use the
buttons to select Print all and
then press the
button.
The print confirmation screen is displayed.
2
Start Printing.
(1) Confirm the Page size and Media type.
To change any of the settings, press the
(Settings button).
See “Specifying the Paper and Other Settings”
on page 33.
(2) Press the
(Copies +/Copies –) buttons to specify the number of copies to print.
(3) Press the
(Print button).
All photos saved on the memory card will be printed.
note
How to Print All Photos without Connecting to TV
You can print all photos saved in the memory card without connecting TV and the
printer with the key operation on the printer.
1 Turning on the printer.
2 Load paper.
See “Loading Paper” on page 18.
* Adjust to the paper size you loaded, and print borderless on the whole paper
with Date print Off and Media type Photo Paper Plus Glossy.
30
Enjoy Photos on TV and Printing —Advanced—
3 Install the memory card on the printer.
See “Inserting a Memory Card” on page 16.
4 Press the Print all button on the printer.
See “Operation Panel” on page 7.
Printing is started in order of the recent shooting date.
* Press the Print All button on the printer if you want to cancel the printing.
„ Printing a Photo List—Print Index
You can print a list of all photos saved in the memory card known as an index print.
note
When many photos are stored in a memory card, it is convenient to search for photos
to display or print using the shooting date as the search key.
See “Searching for Photos with the Shooting Date—Search” on page 35.
1
Select Print index.
(1) Use the
buttons to select Print Studio
from the menu screen.
(2) Press the
button.
The menu of Print Studio is displayed.
(3) Use the
buttons to select Print index
and then press the
button.
The print confirmation screen is displayed.
2
Start Printing.
(1) Confirm the Page size and Media type.
To change any of the settings, press the
(Settings button).
See “Specifying the Paper and Other Settings” on
page 33.
(2) Press the
(Copies +/Copies – buttons) to
specify the number of copies to print.
(3) Press the
(Print button).
A list of all photos saved on the memory card
will be printed.
note
For index printing, numbers of images printed on one sheet are as follows according to
the paper size.
4"×6"/101.6×152.4 mm : 24 images
credit card : 6 images
31
Enjoy Photos on TV and Printing —Advanced—
„ Printing According to the settings Made on the Camera
—DPOF Printing
If DPOF (Digital Print Order Format) settings are made on the camera, photos
are printed automatically according to those settings.
note
• This printer allows you to make the following DPOF settings:
– Image format: CIFF, Exif (JPEG), JFIF, and Exif (Tiff)
– Print type - Standard: The Photos for which you specified “Standard” using the
DPOF function are printed.
– Print type - Index: The photos for which you specified “Index” using the DPOF
function are printed according to the index print layout.
– Photos to Print: Only the photos specified using the DPOF function is printed
(photos cannot be specified from the menu.)
– Copies: photos are printed according to the numbers of copies specified using
the DPOF function (numbers of copies cannot be specified from the menu).
– Date Print: Date of DPOF on/off setting (date print cannot be specified from the menu).
– Other functions (addition of comments, trimming/rotation, etc.) are not supported.
• Photos are automatically scaled according to the paper size. The upper, lower, left, and/or
right portion(s) of the photo may be missing depending on the size of the paper you use.
1
Select DPOF print.
(1) Use the
buttons to select Print Studio
from the menu screen.
(2) Press the
button.
The menu of Print Studio is displayed.
(3) Use the
buttons to select DPOF print
and then press the
button.
The print confirmation screen is displayed.
note
You cannot select the menu if DPOF
information is not saved on the installed
memory card.
For instructions on setting DPOF, refer to the
user’s manual for your digital camera.
2
Start Printing.
(1) Confirm the Page size and Media type.
To change any of the settings, press the
(Settings button).
See “Specifying the Paper and Other Settings”
on page 33.
(2) Press the
(Print button).
The photos will be printed according to the
DPOF information on the memory card.
32
Enjoy Photos on TV and Printing —Advanced—
Handy Functions and Settings
This section describes the functions of the buttons, such as the
(Settings
button) and the
(Search button), used at each printing operation and the
common operations, such as to change the language displayed or to set the date
display format.
•
•
•
•
•
“Specifying the Paper and Other Settings” on page 33
“Searching for Photos with the Shooting Date—Search” on page 35
“Setting the Date Display Format” on page 36
“Changing the Language Displayed” on page 37
“Resetting All Settings” on page 38
„ Specifying the Paper and Other Settings
You can use the
(Settings button) to set the following items: Page Size or
Media Type, Bordered or Borderless print, and Date print.
1
Press
(Settings button).
The Settings screen is displayed.
note
You can display the Settings screen from any
screen only by pressing
(Settings button).
2
Select an item to set.
(1) Press the
and
setting items.
button to move among
(2) Press the
and
button to display the
selected item.Repeat the same steps to set the
necessary items.
(3) Confirm the settings and press the
button.
(4) The screen returns to the state before the
(Settings button) was pressed.
33
Enjoy Photos on TV and Printing —Advanced—
„ Other Setting Items
Basic settings
• Page size
Select the paper size for the print job.
• Media type
Select the Media type.
note
For information on available media types and on setting Page size and Media
type, refer to “Media Types for Card Direct Printing” on page 20.
• Borderless print
Borderless .........Prints on the whole paper without a border.
Bordered ...........Prints with a border.
• Date print
On .....................Prints the date the photo was taken.
Off .....................Does not print the date the photo was taken.
note
You can change the date display format.
See “Setting the Date Display Format” on page 36.
Optimizer
• POP
On ..................... Photo Optimizer PRO function (automatically corrects the
image brightness and color) is used together.
Face brightener...Activates Photo Optimizer PRO function and Face
brightener function. Face brightener function brightenes
a darkened face on the photo taken against the light.
Off .....................No Photo Optimizer PRO functions are performed.
• Vivid Photo
On .....................Vivid Photo function (Greens and blue are printed more
brightly) is used.
Off .....................No Vivid Photo functions are performed.
• Noise reduction
On .....................Digital camera noise (which may be seen in dark areas or
areas such as sky) is reduced.
Off .....................No Noise reduction functions are performed.
34
Enjoy Photos on TV and Printing —Advanced—
„ Searching for Photos with the Shooting Date—Search
When there are many photos stored on the memory card, you can select photos to
display or print by specifying the shooting date with the search function.
note
Displaying/Printing Photos Shot Yesterday
Specify the date of yesterday in Start of range and End of range in the search function.
• Select Photo Gallery to display photos that were shot yesterday.
• Select Print all or Print index to print photos that were shot yesterday.
1
Press the
(Search button).
The search screen is displayed.
note
You can display the Search screen from any screen
by pressing the
(Search button).
For example, you can display the Search screen
even if you are pasting photos during the layout
print operation.
See “Specifying the Layout” on page 26.
2
Specify the target range.
(1) Press the
and
button to specify the
earliest shooting date in Start of range.
(2) Press the
of range.
button to move the cursor on End
(3) Press the
and
button to specify the
latest shooting date in End of range.
3
Press the
button.
You can display or print the photos that are shot within the specified range of date.
In the search mode, the photo number field is inverted.
note
To cancel the search mode, follow the procedure below
1 Press the
(Search) button.
The search screen is displayed.
2 Press the
(Cancel) button.
The search mode is canceled and all the photos in the memory card can be
displayed and printed.
Removing the memory card also cancel the search mode.
35
Enjoy Photos on TV and Printing —Advanced—
„ Setting the Date Display Format
You can change the format of data printing.
1
Select Tool Box from the menu.
(1) Use the
buttons to select Tool Box
from the menu screen.
(2) Press the
button.
(3) Use the
button to select Date display
format and then press the
button.
The Date display format screen is displayed.
2
Select Date format.
(1) Use the
buttons to select date format.
YYYY/MM/DD
Prints the date the photo was taken in the
format YYYY/MM/DD (2004/10/22).
MM/DD/YYYY
Prints the date in the format MM/DD/YYYY
(10/22/2004).
DD/MM/YYY
Prints the date in the format DD/MM/YYYY
(22/10/2004).
(2) Press the
button.
The date will be printed with the specified date display format.
36
Enjoy Photos on TV and Printing —Advanced—
„ Changing the Language Displayed
You can change the language displayed on TV.
1
Select Tool Box from the menu.
(1) Use the
buttons to select Tool Box
from the menu screen.
(2) Press the
(3) Use the
button.
button to select languages and
then press the
2
button.
Select a language for display.
(1) Use the
language.
buttons to select a
note
Languages are displayed differently
depending on region.
(2) Press the
button.
The menu, selection items, and messages will
be displayed in the language you select.
37
Enjoy Photos on TV and Printing —Advanced—
„ Resetting All Settings
You can reset all settings other than the display language and the print head
position to the initial state.
1
Select Tool Box from the menu.
(1) Use the
buttons to select Tool Box
from the menu screen.
(2) Press the
button.
(3) Use the
then press the
2
Use the
button to select Resetting and
button.
button to select Yes and then press the
button.
All settings other than the display language and the print head position have
been reset to the initial state.
38
Printing Photographs Directly from a Digital Camera
Printing Photographs Directly from a
Digital Camera
Connecting a digital camera or camcorder to printer allows you to print recorded
images directly without using a computer. Connect the USB cable that came with
your digital camera.
note
• This printer supports PictBridge. PictBridge is an Industry standard enabling a
range of digital photo solutions, including the direct printing of photos from a
digital still cameras or camcorders* without the need to use a computer.
• This printer supports Canon Bubble Jet Direct. It allows you to print photos from a
Canon Bubble Jet Direct compatible (PictBridge incompatible) digital camera or
digital camcorder without a computer by simply connecting the digital camera or
digital camcorder to this printer.
* Hereafter, the digital still camera and digital video camcorder are collectively
called a digital camera or camera.
PictBridge- compatible digital cameras. on page 41.
Canon Bubble Jet Direct compatible digital cameras. on page 43.
Connecting to a Digital Camera
To connect a digital camera to this printer, use the USB cable supplied with the
digital camera for connection to a computer.
Do not connect any equipment other than the camera ready for PictBridge or Canon
Bubble Jet Direct to the Direct Print Port of the printer. Otherwise, electric shock, fire,
or damage to the camera could result.
39
Printing Photographs Directly from a Digital Camera
note
• When printing photos with the digital camera connected to the printer, it is
advisable to use the AC adapter supplied with the camera. If you use the camera
battery, be sure to charge it fully.
• Depending on the model or brand of your camera, you may have to select a mode of
printing photos in compliance with PictBridge before connecting the camera.
• You may also have to turn on the camera or select Play mode manually after
connecting the camera to the printer. Perform necessary operations according to
the Instruction Manual supplied with your camera.
• When printing from your PC, be sure to unplug the cable connecting the digital
camera.
• The printer performs printing with its print speed decreased to improve its print
quality as much as possible when the print head has not been aligned. The print
speed may be increased if you perform the print head alignment.
see “Aligning the Print Head” on page 59.
1
2
3
Turn on the printer.
Load the 101.6×152.4mm/4"×6" paper into the paper support in the
portrait position (feed from the short side) and the print side facing up.
Connect the digital camera to the printer.
(1) Make sure the camera is turned off.
(2) Connect the camera to the printer using the USB cable (for connection to
computer) supplied with the camera.
(3) Turn on and Set up the camera for direct printing.
When the connection between the camera and printer has been established, the
Power lamp on the printer flashes once.
* The power-on sequence may differ depending on the model or brand of the
camera.
The icon will display on the LCD display of the digital camera when the printer
is correctly connected.
: A PictBridge-compliant digital camera.
: A Canon Bubble Jet Direct compatible digital camera.
40
Printing Photographs Directly from a Digital Camera
Direct Printing from PictBridge-compatible Digital
Cameras
When operating the camera, be sure to follow the instructions given in the
Instruction Manual supplied with the camera. Let’s take a look at the paper size,
paper type, layout, image optimization modes, and date printing modes that can be
set on the PictBridge-compatible camera connected to the printer.
„ Confirming or Changing the Camera Settings
The settings below can be changed by pressing the “Settings” button when
the camera is connected. However, changes can be made in the properties
screen only when the corresponding items below are in the “Default Setting”
(selections based on the printer setting) using the controls of the camera.
– Paper size
– Paper type
– Layout
– Image optimize
note
About the Settings Explained Below
The settings explained below cannot be made depending on the brand or model of your
camera. If any setting cannot be made, the default setting explained above is used.
Names of settings that are displayed on Canon PictBridge-compatible cameras are
used in the description given below. Different names may be displayed on your camera
depending on the brand or model.
About “Paper size” and “Paper type”
When you have select the “Default setting” (selections based on the printer
setting), the printer operates based on the “Page size” and the “Media type”
settings made using the remote control.
note
To print on Photo Paper Pro, select “Fast Photo” from “Paper type” on the display of
the camera. Select “Photo” for Photo Paper Plus Glossy or other media types.
The following sizes and types of paper can be loaded in the printer by
selecting options in “Paper size” and “Paper type”.
“Paper size” setting
“Paper type” setting
Paper loaded in printer
10×15 cm / 4"×6"
Photo
Photo Paper Plus Glossy
Fast Photo
Photo Paper Pro
Photo
Photo Paper Plus
Semi-gloss
Glossy Photo Paper
Photo Stickers
5.4×8.6 cm / Credit Card
Photo
Glossy Photo Paper Credit
Card Size
41
Printing Photographs Directly from a Digital Camera
About “Layout”
When “Default setting” (selections based on the printer setting) is selected,
the printer operates based on the “Borderless Printing” setting made using
the remote control.
When 10×15cm/4"×6" is selected from “Paper size”, “2-up”, “4-up”, “9-up”,
and “16-up” options may be available in “Layout”.
note
Printing on Photo Stickers
Specify the Paper size, Paper type, and layout for the Photo Stickers provided by
Canon.
Paper size: 10×15cm/4"×6"
Paper type: Photo
layout: 16-up
For instructions on how to load Photo Stickers, see “Loading Paper” on page 18.
About “Image optimize”
When “Default setting” (selections based on the printer setting) is selected,
the printer operates based on the “POP” and “VIVID Photo”, “Noise
reduction”, “Color Adjust” settings made using the remote control.
If you use a Canon PictBridge- compatible camera, you can select “VIVID”,
“NR”, or “VIVID+NR”. (Note that these options cannot be selected for some
models.)
note
• When “POP” (Photo Optimizer PRO) is selected, automatically corrects the image
brightness and color.
• When “VIVID” is selected, green and blue portions of photos are printed vividly.
• When “NR” (Noise Reduction) is selected, noise in blue portions, such as the sky,
and dark portions is removed.
• When “VIVID+NR” is selected, functions of both “VIVID” and “NR” are performed.
About “Date print”
“Date Print” depends on the settings made using the controls of the camera.
note
• This printer can handle only Exif/JPEG image data to produce photos using
PictBridge.
• Never disconnect the USB cable during printing.
• When disconnecting the USB cable between the digital camera and printer, follow
the instructions given in the Instruction Manual of the camera.
• Controls of the digital camera cannot be used for the following:
– Print quality setting
– Printer maintenance
42
Printing Photographs Directly from a Digital Camera
Printing Photographs Directly from a Canon Bubble
Jet Direct Compatible Digital Camera
Let’s take a look at the media types that can be set on the Canon Bubble Jet Direct
compatible digital camera.
„ Media Types for Digital Camera
When you connect a digital camera, you can use the following media:
Digital Camera Setting
Media Type
Card #1
Photo Paper Pro 4"×6" / 101.6×152.4 mm
Card #2
Photo Paper Plus Glossy 4"×6" / 101.6×152.4 mm
Photo Paper Plus Semi-gloss
4"×6" / 101.6×152.4 mm
Glossy Photo Paper 4"×6" / 101.6×152.4 mm
Card #3
Not supported
LTR
Not supported
A4
Not supported
note
• For the digital camera operation method and troubleshooting, refer to your digital
camera manual.
• For print error messages, refer to“Cannot Print Properly from the Digital Camera” on
page 73.
• By operating the digital camera, you can make the following prints:
– You can make a standard print from the image displayed in the single display
mode or in the index display mode.
– You can print specified numbers of images, or make an index print by editing the
DPOF.
– For the images taken with an Exif 2.2-compatible digital camera, the Photo
Optimizer PRO function can be used.
– If date printing is set from the operation panel of the digital camera, the date
when the photograph was taken is to be printed (excluding the index print).
– Images will be scaled automatically according to the image size set on the digital
camera and the size of the media set on the printer.
• The digital camera does not support the following functions:
– Print quality setting
– Maintenance
• Images other than Exif may not be index printed.
43
Printing Photos with Infrared Compatible Mobile Phones
Printing Photos with Infrared Compatible
Mobile Phones
Using this printer, you can print a photo taken with a mobile phone in the specified
layout on a specified media through infrared communication.
Requirements for Infrared Communication with the
Mobile Phone
To carry out printing through infrared communication with a mobile phone:
– The mobile phone must have an IrDA port and support IrMC ver. 1.1.
– Only JPEG images are supported.
note
• Following limitations apply on transmittable data:
– It does not support printing downloaded photos or other content or a photo
attached to an email for security reason.
– It does not support printing video files.
– Depending on your device, the Fine print quality option may not be available due
to the restriction on the infrared transfer capacity.
– Depending on your device, it may not print data stored in a memory card.
– It automatically sets the photo quality and orientation (portrait or landscape)
according to the photo.
– It automatically sets the margin according to the photo size.
– Depending on the amount of image data, it may take a while for this printer to
start to print after starting the infrared transfer.
Setting the Media Type, Page Size, and Layout
You can select the media type, page size, layout and borderless printing in the
Infrared print screen when printing from a mobile phone.
* The default settings are printing borderless on the whole paper
according to the paper size loaded with Date print Off and Media type
Photo Paper Plus Glossy.
* You can specify the layout by displaying the photo on TV and performing
settings in the print confirmation screen.
See “Displaying and Setting the Infrared print Screen” on page 44.
„ Displaying and Setting the Infrared print Screen
1
Prepare settings.
Connect TV to the printer and turn them on.
See “Connect TV to the printer.” on page 13.
44
Printing Photos with Infrared Compatible Mobile Phones
2
Select Infrared print.
(1) Use the
buttons to select Tool Box
from the menu screen.
(2) Press the
button.
The Tool Box menu is displayed.
(3) Use the
button to select Infrared print and
then press the
button.
The Infrared print screen is displayed.
3
Select an item to set.
(1) Press the
and
button to select the
desired setting item.
(2) Press the
and
button to display the selected item.
(3) Set the required setting items and press the
button.
„ Other Setting Items
• Page size
Select the Page size for the print job.
• Media type
Select the Media type.
note
For information on setting “Page size” and “Media type”, See “Media Types for Card
Direct Printing” on page 20.
• Layout
Specify the number of copies to print the same photo on one page.
note
Printing on Photo Stickers
Specify the Page size, Media type, and layout for the Canon Photo Stickers.
Page size: Sticker
Media Type: Photo Paper Plus Glossy or Photo Paper Pro
Layout: Photo ×16
45
Printing Photos with Infrared Compatible Mobile Phones
Performing Infrared Printing
There are two methods to print a photo taken with a mobile phone via infrared
communication.
• Printing the photo with the mobile phone and the printer.
• Printing the photo by displaying it on TV.
When performing infrared communication, also refer to your mobile phone manual.
„ Printing a Photo with a Mobile Phone and the Printer
You can print a photo with a mobile phone and the printer without connecting
a TV to the printer.
1
Prepare to print.
(1) Turn on the printer.
(2) Load the paper.
See “Loading Paper” on page 18.
(3) Check or change the media type and layout if required.
See “Specifying the Paper and Other Settings” on page 33.
When you do not specify a setting, printing will be borderless on the whole paper according
to the paper size you loaded with Date print Off and Media type Photo Paper Plus Glossy.
2
Start Infrared Communication.
(1) Align the infrared port of a mobile phone to that of the printer at a distance of less
than 7.9 inch (20 cm).
note
The effective angle of the infrared port of the printer is about 10° from the central axis
in both vertical and horizontal directions.
The allowable distance of communication with the printer depends on the mobile
phone you use. For this distance, refer to your mobile phone manual.
Infrared port of printer
Less than 7.9 inch (20 cm)
(Do not block with any
obstacle.)
Effective angle
(in both vertical and horizontal direction): About 10°
(2) Select the photo you want to print and send the data with the infrared file transfer
function on the mobile phone.
The POWER lamp flashes in green if the printer successfully receives data.
Printing is started once the data has been transferred.
Do not move the mobile phone and the printer until the printing starts.
46
Printing Photos with Infrared Compatible Mobile Phones
„ Printing a Photo by Displaying it on TV
You can display a photo taken with a mobile phone and check the photo in the
print confirmation screen before printing.
1
Prepare to print.
(1) Connect TV to the printer and turn them on.
See “Connect TV to the printer.” on page 13.
(2) Load the paper.
See “Loading Paper” on page 18.
2
Display a photo taken with a mobile phone on TV.
(1) Use the
(2) Press the
buttons to select Tool Box.
button.
(3) Use the
button to select Display Photo
received via infrared and then press the
button.
The Display Photo received via infrared screen
is displayed.
(4) Use the
press the
buttons to select On and then
button.
It sets the printer to display the photo taken
with the mobile phone on TV.
note
The Display Photo received via infrared setting is enabled until the printer is turned off.
Set the settings again when you turn off the printer.
47
Printing Photos with Infrared Compatible Mobile Phones
3
Start Infrared Communication.
(1) Align the infrared port of a mobile phone to that of the printer at a distance of less
than 7.9 inch (20 cm). See “Start Infrared Communication.” on page 46.
(2) Select the photo you want to print and send the data with the infrared file transfer
function on the mobile phone.
“Receiving a photo from a mobile phone via infrared.” message is displayed if the
printer successfully receives data. When the data transfer is completed, the photo
is displayed on TV.
4
Start Printing.
(1) Check the photo whether it is the photo you
want to print on TV and press the
(Print
button).
The print confirmation screen is displayed.
(2) Confirm the Page size and Media type.
To change any of the settings, press the
(Settings button).
See “Specifying the Paper and Other Settings”
on page 33.
(3) Press the
print.
(Copies +/Copies – buttons) to specify the number of copies to
(4) Press the
(Print button).
The photo from the mobile phone is printed.
note
• When printing from a mobile phone, refer to your mobile phone manual.
• Do not place anything between the infrared port on the printer and the infrared port
on the mobile phone. It may cause the data transfer failure.
• Do not terminate the infrared communication between the printer and the mobile
phone during the data transfer. If such is the case, turn off the printer and cancel
the print job.
48
Printing with the computer
Printing with the computer
Installing the Printer Driver
„ Installing the Printer Driver—Windows
note
• Use a computer equipped on which Windows XP or Windows 2000 can operate.
• Do not disconnect the cable or remove the CD-ROM during the installation. The
driver cannot be correctly installed.
• The screens below refer to Windows XP installation. Screens may differ depending
on the operating system you are using.
• When installing the printer driver in Windows XP or Windows 2000, log on to the
system as a member of the Administrators group.
• If the following screen appears automatically, click
Cancel to quit the screen and turn off the printer.
Next, remove and replace the USB cable connected
to your computer. Then follow steps 3 to 12 to
install the printer driver.
1
Prepare the Printer.
See “Easy Setup Instructions” on page 3.
2
Ensure that the printer and computer are turned off.
OFF
3
Turn on the computer and start Windows. If any applications
automatically run, quit them.
Disable any anti-virus programs.
Do NOT turn the printer on at this stage.
4
Place the Setup Software & User’s Guide CD-ROM in the CD-ROM drive.
49
Printing with the computer
note
• If the installer in the CD-ROM does not run automatically, click Start and select My
Computer, then double-click the CD-ROM icon.
For Windows 2000 users, double-click My Computer in the Windows screen, then
double-click the CD-ROM icon.
• If the language selection screen appears, select a language, then click OK.
• If the place selection message appears, select your place of residence, then click Next.
5
Follow the instructions displayed on screen.
When the screen shown on the right is displayed,
click Easy Install.
note
Select Easy Install in order to install application software, electronic manuals and
printer driver.
Select Custom Install in order to choose the options you would like to install.
6
7
When the list of applications to install
appears, verify the contents, click Install, and
then follow the instructions on the screen.
Read the License Agreement, then click Yes to continue.
Installation will begin.
8
Connect your USB cable when the Printer
Connection screen appears.
(1) Connect one end of a USB cable to the computer,
the other to the printer.
(2) Turn the printer on.
If the printer is recognized, the printer driver will be
automatically installed.
note
If the connection is not recognized, refer to the
section “Cannot Install the Printer Driver” on page 75.
50
Printing with the computer
9
When the “Installation Results” window
appears, click OK.
note
For U.S. customer only
Follow the on-screen instructions to register your
product.
For more information, refer to the attached leaflet.
10 When the “On-screen Manual” screen appears, click Next.
11 When the “Print Head Alignment Recommended” screen appears, click
Next.
12 When the “Installation completed
successfully” window appears, click Exit.
When Restart is displayed, ensure the Restart the
system now (recommended) check box is selected,
then click Restart.
„ Installing the Printer Driver—Macintosh
note
• The steps described in this section reflect Mac OS X v.10.3.x.
• Mac OS X v.10.3 x is recommended.
• Do not remove or insert the USB cable during installation, as this may result in the
computer or printer not operating normally.
• Before installing the driver, disable all anti-virus programs and automatically
loading programs or remove them from your system folder.
• The Setup Software & User’s Guide CD-ROM contains the application software,
Easy-PhotoPrint, to import and print image data. If you want to install EasyPhotoPrint, double-click the application folder, then double-click the EasyPhotoPrint folder, and Installer.
• The steps described in this section are for installing in Mac OS X v.10.3.x.
1
2
3
Turn on the Mac.
Place the Setup Software & User’s Guide CD-ROM in the CD-ROM drive.
Double-click the Printer Driver folder.
51
Printing with the computer
4
Double-click SELPHY DS700 xxx.pkg.
note
XXX after the model name (SELPHY DS700) is the
version number.
5
6
7
8
9
When the “Welcome to the BJ printer driver
Installer” screen appears, click Continue.
Read the License Agreement and click Continue, then click Agree.
Select a destination to where you want to
install the printer driver, and click Continue.
Click Install.
Enter an administrator name and a password,
then click OK.
note
If you have forgotten the administrator name and/or
password, click
and follow the instructions in Mac
Help.
10 A message asking for your confirmation to restart your computer
appears on the screen. Read the message, then click Continue
Installation.
Software installation will start.
11 Software installation is complete.
Restart your computer.
12 Double-click the Memory Card Utility folder.
52
Printing with the computer
13 Double-click Memory Card Utility 300.mpkg.
14 Click Continue.
15 Read the License Agreement and click
Continue, then click Agree.
16 Select a destination to where you want to install the memory card
utility, and click Continue.
17 Click Install.
18 Enter an administrator name and a password,
then click OK.
note
When you have forgotten the administrator name and/
or password, click
mark and follow the instructions
in Mac Help.
19 A message asking for your confirmation to restart your computer is
displayed on the screen. Read the message, then click Continue
Installation.
Software installation will start.
20Software installation is complete.
Restart your computer.
note
For U.S. customer only
Double-click on the Product Registration icon, found in the Mac OS X folder, to register
your product.
For more Information, refer to the attached leaflet.
note
After your computer is restarted, check the Print Setup Utility (Print Center for Mac OS
X v.10.2.x) to ensure that the printer is added.
If it is not added, add the printer.
For more information, refer to the Mac Help.
53
Printing with the computer
How to View the User’s Guide
The User’s Guide is the manual displayed on the computer screen.
Refer to the User’s Guide when you want to connect the printer to your computer or
encounter with a problem that is not described on the Photo Printing Guide.
„ How to View the User’s Guide—Windows
1
Double-click the DS700 User’s Guide short-cut icon on the desktop.
note
• You can display the User’s Guide from the Start menu.
Click Start and select All Programs (or Programs), Canon SELPHY DS700 Manual
and User’s Guide.
• To uninstall the User’s Guide or Photo Application Guide, click Start and select All
Programs (or Programs), SELPHY DS700 Guide and Uninstall.
It uninstalls all the document you installed.
„ How to View the User’s Guide—Macintosh
1
2
3
4
5
Load the CD-ROM in your computer, and double-click the OS X folder.
Double-click the Manual folder.
Select a language folder.
Double-click the User’s Guide folder.
Double-click the icon for the DS700_UG_ENG.htm file.
„ User’s Guide Table of Contents
Your printer’s User’s Guide offers detailed information on the following topics.
How to Use This Manual
Basic Printing
Printing Photographs
Opening the Printer Properties Dialog Box
(Windows)
Printing Media
Compatible Media Types
Photo Paper Pro PR-101
Photo Paper Plus Glossy PP-101
Photo Paper Plus Semi-Gloss SG-101
Glossy Photo Paper GP- 401
Checking the Status of the Printer
BJ Status Monitor Functions (Windows)
Printer Setup Utility (Macintosh)
Routine Maintenance
Troubleshooting
54
Appendix
Printing Area
Using the Memory Card Utility
Uninstalling Drivers
Uninstalling the Electric Manuals (Windows)
Printer Driver Functions (Windows)
Printer Driver Functions (Macintosh)
BJ Printer Utility (Macintosh)
Index
Printing Maintenance
Printing Maintenance
When Printing Becomes Faint or Colors are Incorrect
When printing becomes faint or colors are incorrect, even if ink remains in the ink
tanks, the print head nozzles are probably clogged. Follow the procedures below to
clean the nozzles.
Step 1
“Printing the Nozzle Check Pattern” on page 56
If the pattern is
printed normally,
select All A.
After print head cleaning,
print the nozzle check pattern.
If the print quality is poor, perform print head cleaning.
Step 2
“Print Head Cleaning” on page 57
If the problem remains after performing print head cleaning three times
Step 3
“Print Head Deep Cleaning” on page 58
Still the problem remains
Step 4
“Replacing an Ink Tank” on page 60
note
• If the print quality is poor, adjust the print head position.
It may solve the problem.
See “Aligning the Print Head” on page 59.
• If ink tank replacement does not resolve the problem, the print head may be worn
out. Contact a Canon service representative.
55
Printing Maintenance
„ Printing the Nozzle Check Pattern
Print the nozzle check pattern to determine whether the ink ejects properly
from the print head nozzles. Use this function when printed results are
blurred or the color is incorrect.
1
Prepare to print.
(1) Connect TV to the printer and turn them on.
See “Connect TV to the printer.” on page 13.
(2) Load the supplied paper or Canon 4"×6"/ 101.6×152.4mm paper into the paper
support. See “Loading Paper” on page 18.
2
Print the Nozzle Check Pattern.
(1) Use the
buttons to select Tool Box and then press the
button.
(2) Use the
button to select Nozzle check
and then press the
button.
(3) Use the
press the
buttons to select Yes and then
button.
The nozzle check pattern is printed.
3
Examining the nozzle check pattern.
• When all print check patterns are
successfully printed:
Select All A and then press the
button.
When no white stripes appear
• When there is more than one white stripe
on the print check patterns:
Select Also B and then press the
button.
When White stripes appear
The confirmation screen of Head Cleaning
is displayed.
Select YES to start the head cleaning.
See “Print Head Cleaning” on page 57.
56
Printing Maintenance
„ Print Head Cleaning
Clean the Print Head if white stripes appear in the nozzle check pattern.
Cleaning the Print Head consumes ink, so perform Print Head Cleaning only
when necessary.
1
Connect TV to the printer and turn them on.
See “Connect TV to the printer.” on page 13.
2
Start Print Head Cleaning.
(1) Use the
buttons to select Tool Box from the menu screen and then press
the
button.
(2) Use the
button to select Head Cleaning
and then press the
button.
(3) Use the
press the
buttons to select Yes and then
button.
Important
Do not perform any other operations until
the print head cleaning finishes. This takes
about 40 seconds.
3
Print the nozzle check pattern to verify that the print head nozzles are
clean.
When print head cleaning finishes, the
confirmation message is displayed. Select Yes.
See “Printing the Nozzle Check Pattern” on
page 56.
note
If the problem remains after performing print head cleaning three times, try print head
deep cleaning.
57
Printing Maintenance
„ Print Head Deep Cleaning
If print quality does not improve by standard print head cleaning, try print
head deep cleaning, which is a more powerful process. Print head deep
cleaning consumes ink, so perform this procedure only when necessary.
1
Prepare settings.
Connect TV to the printer and turn them on.
See “Connect TV to the printer.” on page 13.
2
Start Print Head Deep Cleaning.
(1) Use the
buttons to select Tool Box from the menu screen and then press
the
button.
(2) Use the
button to select Deep Cleaning
and then press the
button.
(3) Use the
press the
buttons to select Yes and then
button.
Important
Do not perform any other operations until the print
head deep cleaning finishes. This takes about one
minute.
When print head deep cleaning finishes, the confirmation message is displayed.
Select Yes.
note
After print head deep cleaning finishes, print the nozzle check pattern to verify
that the print head nozzles are clean.
See “Printing the Nozzle Check Pattern” on page 56.
If the problem remains, replace the ink tank.
See “Replacing an Ink Tank” on page 60.
If ink tank replacement does not resolve the problem, the print head may be worn
out. Contact a Canon service representative.
58
Printing Maintenance
„ Aligning the Print Head
If print quality is poor, adjust the print head position. It may solve the problem.
1
Prepare to print.
(1) Connect TV to the printer and turn them on.
See “Connect TV to the printer.” on page 13.
(2) Load the supplied paper or Canon 4"×6"/ 101.6×152.4mm paper into the paper
support. See “Loading Paper” on page 18.
2
Print the Pattern.
(1) Use the
buttons to select Tool Box from the menu screen and then press
the
button.
(2) Use the
button to select Head
alignment and then press the
button.
The pattern print confirmation screen is
displayed.
(3) Use the
press the
buttons to select Yes and then
button.
The pattern is printed.
(4) When the confirmation message is displayed,
select Yes and then press the
button.
3
Align the Print Head.
(1) Look at the print out. From the patterns on the
column A, select the most even, least irregular
patterns and press the
and
button to
select the number that corresponds.
(2) Press the
button to move the cursor on the column B and select the most even,
least irregular patterns and press the
and
button to select the number
that corresponds.
Repeat the operation for the column C and D.
59
Printing Maintenance
(3) Press the
button.
The print head position is adjusted.
note
Printing the current setting of the print head position
1 Connect TV to the printer and turn them on.
See “Connect TV to the printer.” on page 13.
2 Load the supplied paper or Canon 4"×6"/101.6 x 152.4mm Size paper into the
paper support.
3 Select Tool Box and then press the
button.
4 Select Head alignment print and then press the
button.
The pattern print confirmation screen is displayed.
5 Select Yes and then press the
button.
The Head alignment value is printed.
Replacing an Ink Tank
When replacing an ink tank, check the model number very carefully.
The printer will not print properly if the wrong ink tank is used.
• Ink tank:
BCI-16 Color
„ Replacing an Ink Tank
When an ink tank runs out of ink, replace it using the following steps.
1
Open the cover.
(1) Ensure that the printer is on.
(2) Slide the cover open switch toward the right
to open the cover.
The print head holder moves to the center.
60
Printing Maintenance
2
Remove the empty ink tank.
(1) Push the tab.
(2) Remove the ink tank.
Important
• Handle ink tanks carefully to avoid staining clothing or the surrounding area.
• Discard empty ink tanks according to the local laws and regulations regarding
disposal of consumables.
3
Prepare a replacement ink tank.
(1) Unpack a new ink tank and remove the orange
protective cap.
Important
• Do not re-attach the protective cap once you have
removed it.
• Once the protective cap is removed, do not touch
the open ink port.
4
Insert the ink tank.
(1) Insert a new ink tank with it slightly
slanted.
(2) Push down on the
on the ink
tank until it clicks into place.
5
Close the cover.
The print head holder moves to the right.
61
Printing Maintenance
note
• To maintain optimal print quality, use an ink tank within six months of its first use.
• Once an ink tank has been used, do not remove it from the printer and leave it out in
the open. This will cause the ink tank to dry out and the printer may not function
properly if it is reinstalled.
• Color ink is consumed in the head cleaning and deep cleaning, which are necessary
to maintain the printer’s capabilities.
• When an ink tank runs out of ink, replace the ink tank with a new one immediately.
• If printing is continued with no ink in the ink tank, a problem may occur.
„ Resetting the Ink Counter
When an ink tank is replaced, the ink counter must be reset.
The low ink warning is only displayed properly if the ink counter is reset.
Message Prompting Confirmation of Ink Tank Replacement
If an ink tank is removed, the printer will output a message prompting you to
confirm replacement of the ink tank at the start of the next print job.
When an ink tank has been replaced, follow the procedure below to reset the
ink counter. The low ink warning is only displayed properly if the ink counter
is reset.
1
Reset the ink counter.
(1) Check the message, select Yes and then press
the
button.
This returns the ink level of the ink counter full.
Mistakenly selecting No, instead, will prevent
the low ink warning from functioning properly.
If such is the case, select Ink counter reset
from Tool Box to reset the ink counter.
note
To reset the ink counter from Tool Box
1 Connect TV to the printer and turn them on.
See “Connect TV to the printer.” on page 13.
2 Select Tool Box and then press the
button
3 Select Ink counter reset and then press the
button.
The Ink counter reset confirmation screen is
displayed.
4 Select Yes and then press the
button.
62
Printing Maintenance
„ How Low Ink Warning Setting Works
The low ink warning notifies you of low ink levels during printing. The Low Ink
Warning has been preset to be automatically displayed.
When you reset the ink counter, it will assume that the ink tank is full
regardless of how much ink actually remains. The reset is the only way to
match the counter value with an actual ink volume. Reset the ink counter
when installing a new ink tank.
Low Ink Warning Display
The '!' shows a low ink level in the ink tank.
A new ink tank should be prepared.
How to Display Low Ink Warning Correctly
• Reset the ink counter every time you install a new ink tank.
The ink counter cannot work correctly unless you synchronize it with the
actual ink level. The ink counter can only be adjusted when it is reset at the
time a new ink tank is installed.
Do not reset the ink counter of an ink tank in use.
Synchronization of the counter and the actual ink level will not work
properly.
Important
If you did not reset the counter when you installed the current ink tank, the low ink
warning may not function correctly, until the next time you replace the ink tank.
Refer to “Accompanied by ink tank icon with '?'” on page 66.
63
Troubleshooting
Troubleshooting
Let's take a look at countermeasures against problems which may occur during use
of the printer.
note
Here, we will discuss errors indicated on TV, problems that might occur during direct
printing from the digital camera. If you cannot find the symptom corresponding to a
certain problem, refer to the User’s Guide.
• “Nothing is Displayed on TV/Image is Poor” on page 64
• “The Remote Control is not Working” on page 65
• “A Message is Displayed on TV” on page 65
• “Handling Error Messages” on page 67
• “Paper Does Not Feed Properly” on page 68
• “Printing is Blurred/Colors are Wrong/White Streaks appear” on page 69
• “Printed Surface is Scratched or Ink Blots” on page 70
• “Printer Does Not Start or Printer Stops During Print Jobs” on page 72
• “Cannot Print Properly from the Digital Camera” on page 73
• “Cannot Install the Printer Driver” on page 75
Nothing is Displayed on TV/Image is Poor
Possible Cause
Try This
The power cord/video
cable is not connected.
• Ensure that the power cables for the printer and TV are
connected to the power outlet.
• Ensure that the video output on the printer and the video input on
TV are connected with the video cable.
See “Connect TV to the printer.” on page 13.
The printer or TV is
turned off.
Ensure that the TV is turned on and press the power button on the
remote control attached to the printer.
The video input mode is Select the video input mode on TV.
not selected.
There are no photos
taken with a digital
camera or camcorder.
Only JPEG images taken with the digital cameras or digital
camcorders can be displayed on TV. The data edited or modified on
the computer must be printed from the computer.
There could be a
problem with TV.
Connect a device such as a game device or VCR to the video input
on TV to see if graphics are displayed properly on TV.
64
Troubleshooting
The Remote Control is not Working
Possible Cause
Try This
The distance between
the remote control and
the printer is too long/
there is an obstruction
• Aim the remote control at the remote control receiver on the
printer and bring it closer.
• Remove the obstruction if there is any impediment between the
remote control and the printer.
• The remote control may operate improperly if strong light such
as sunlight hits the remote control receiver. Change the
installation location, or reduce the light with curtains.
The battery is out of use. Replace with the new battery if the remote control does not work.
See “Setting or Replacing the Battery” on page 10.
The lithium coin cell battery CR2025 is available for this remote
control. Purchase the commercial battery for replacement.
A Message is Displayed on TV
If a message is displayed on TV, take the corresponding countermeasure described
below.
Message/Error
Try This
No photos stored in a
memory card.
Photo data edited or processed on the computer should be printed
from the computer, not from the camera.
Ink tank may have been • If the ink tank has been replaced with a new one.
replaced.
Select Yes to reset the ink counter.
See “Resetting the Ink Counter” on page 62.
• If the ink tank has been removed for a certain period (the ink
tank has not been replaced)
Select No on the dialog box described above.
Ink is almost empty.
The '!' show a low ink level in the ink tank. A new ink tank (BCI-16
Color) should be prepared.
Waste ink absorber*
almost full.
Press the RESUME/CANCEL button to recover from the error.
You can print photos for a while but you cannot print any more
photos when the waste ink absorber becomes full. Contact a Canon
service representative.
Read-write mode
enabled.
The memory card utility started on the computer has write-enabled
the card slot. When the card slot is write-enabled, the printer
cannot print photos.
When you have finished writing data to the card, select the readonly mode. For the cancellation procedure, refer to the on-screen
User’s Guide.
Cannot communicate
Disconnect the camera cable, press the printer's RESUME/CANCEL
with a connected device. button and reconnect the cable.
If the error is still unresolved, there is a possibility that you are
using a digital camera or digital video camcorder that is not
supported by this printer. Use digital cameras or video camcorders
that are compatible with this printer.
65
Troubleshooting
Message/Error
Try This
Error code
Disconnect the cable from the printer, and then turn the printer off
and unplug the printer from the power supply. After waiting 10
minutes, plug the power cord back in and turn on the printer.
If the same error persists, contact a Canon service representative.
* The waste ink absorber absorbs ink used at cleaning.
note
Accompanied by ink tank icon with '?'
The ink tank level accompanied by the ink tank icon
with the “?” indicates ink tank is not synchronized
with its ink counter.
Always be sure to reset the ink counter when you replace ink tank.
See “Resetting the Ink Counter” on page 62.
A “?” is displayed next to the Ink counter between the time one ink tank is removed
and the ink counter is reset when the next one is installed. Display of the “?” can be
disabled by changing the settings on Remaining ink level indicator setting.
1 Connect TV to the printer and turn them on.
See “Connect TV to the printer.” on page 13.
2 Select Tool Box and then press the OK button.
3 Select Remaining ink level indicator setting and then press the OK button.
The confirmation screen is displayed.
4 Select Off and then press the OK button.
66
Troubleshooting
Handling Error Messages
When a printer error occurs, the POWER lamp flashes. The number of flashes
indicates the type of error that has occurred. Count the flashes and take the
appropriate action to correct the error.
Number of
Flashes
Possible Cause
Try This
Two flashes
Printer is out of
paper
Reload paper and press the RESUME/CANCEL button.
Three flashes Paper jam
If a paper jam occurs, clear the jammed paper; reload
paper in the printer, then press the RESUME/CANCEL
button.
See “Paper Jams” on page 68.
Five flashes
Install print head.
See “Installing the Print Head” on page 5.
If the print head is already installed, press the POWER
button to turn off the printer, and press the POWER
button again to turn on the printer. If the same error
occurs, the print head may be defective. Contact a
Canon service representative.
Print head not
installed/Defective
print head
Eight flashes Waste ink absorber* The printer has a built-in waste ink absorber to hold the
almost full
ink consumed during print head cleaning. Eight flashes
indicate that this absorber is nearly full. Press the
RESUME/CANCEL button to clear the error so printing
can continue.
Contact a Canon service representative.
Nine flashes
A specified period of
time has lapsed
without receiving a
response from the
digital camera/The
digital camera
connected is not
compatible with this
printer
Disconnect the camera cable, press the printer’s
RESUME/CANCEL button and reconnect the cable.
If the error is still unresolved, there is a possibility that
you are using a digital camera or digital video
camcorder that is not supported by this printer. Use
digital cameras or video camcorders that are
compatible with this printer.
Twelve
flashes
Ink tank is not
installed
If an ink tank is not installed, install it. If an ink tank is
installed, push the PUSH mark on the ink tank to ensure
it has snapped firmly into place.
67
Troubleshooting
note
POWER lamp flashes alternately green and orange
An error that requires contacting a Canon service representative may have occurred.
Disconnect the cable from the printer, and then turn the printer off and unplug the printer from
the power supply. After waiting 10 minutes, plug the power cord back in and turn on the
printer. If the problem remains, contact a Canon service representative.
Paper Does Not Feed Properly
Possible Cause
Try This
Inappropriate paper type Check to see if the paper you are printing on is too thin or curled.
used
See “Print Media to Avoid” on page 18.
Paper feed roller is dirty Follow the steps described below to clean the paper feed rollers.
If post cards do not feed properly, even after correcting any paper
curl, clean the paper feed roller.
1. Ensure that the printer is turned on.
2. Load a few sheet of Canon 4"×6"/101.6×152.4 mm paper with
print side facing down.
3. Hold the RESUME/CANCEL button down and release after the
POWER lamp flashes three times, then feed all of the paper.
After feeding all of the paper, the printer operates for few minutes
and stops.
If the situation is not improved, repeat the same operation for a
few times.
Paper Jams
68
(1)Slowly pull the paper out from the back of the printer or, from
the front of the printer.
• If the paper does not come out from the front of the printer or
the back of the printer, or the paper tears and some of it is left
in the printer, turn the printer off, then open the cover and
remove the piece of paper. Do not touch internal parts in the
printer.
• If you cannot extract the paper, turn the printer off, and then
turn it back on.
The remaining paper will be ejected automatically.
(2)Close the cover and reload the paper into the paper support,
then press the RESUME/CANCEL button on the printer.
• If you have turned on the power again, redo the printing.
• If you cannot reach or remove the torn paper, do not attempt
to disassemble the printer yourself. Contact a Canon service
representative.
Troubleshooting
Printing is Blurred/Colors are Wrong/White Streaks appear
Possible Cause
Try This
Ink tank is not installed
If an ink tank is not installed, install it. If an ink tank is installed, push
the PUSH mark on the ink tank to ensure it has snapped firmly into place.
Media type is not
selected properly
Ensure that the media type selected in the Settings screen is the
same type as the media type loaded on the printer.
See “Specifying the Paper and Other Settings” on page 33.
Print head nozzles
clogged/Print head is
misaligned
Print the nozzle check pattern to check for uneven ink output.
See “Printing the Nozzle Check Pattern” on page 56.
• When a specific color is missing from the nozzle check pattern,
clean the print head. If ink supply is uneven: See “Print Head
Cleaning” on page 57.
• Print head is misaligned.
Align the print head. See “Aligning the Print Head” on page 59.
If this does not solve the problem, ink tank may run out of ink.
Replace the vacant ink tank.
See “Replacing an Ink Tank” on page 60.
Media not loaded with
the print-side up
Check that your paper is loaded with the correct print side facing up.
note
Follow the instructions packaged with your specialty media for
loading and handling.
note
When the color is different from what is displayed on the TV or when it is not printed
with your favorite color
You can adjust the brightness, contrast, color hue when you print a photo.
1 Select Tool Box from the menu and then press the
button.
2 Select Color adjust and then press the
button.
The Color adjust screen is displayed.
3 Press the
and
button to move among setting items.
4 Press the
and
button to display the selected item.
5 Press the
button when the settings are
completed. You can now print a photo with specified
brightness and contrast.
and
button to print a photo brighter and darker.
Brightness ........... Press the
You can print a photo brighter in the + direction and darker in
the - direction.
and
button to print a photo with higher contrast
Contrast ............... Press the
and lower contrast.
You can print a photo with higher contrast in the + direction and
lower contrast in the - direction.
Color hue..............Press the
button to enhance the red colors and the
button to enhance the yellow colors at the print.
You can print a photo with the yellow colors enhanced in the Yellow
direction and with the red colors enhanced in the Red direction.
69
Troubleshooting
Printed Surface is Scratched or Ink Blots
Possible Cause
Try This
There are ink blots on
the printed surface.
Clean the paper feed roller.
See “Paper Does Not Feed Properly” on page 68.
There are ink blots on
the back side of the
printed surface.
If the protrusions inside the printer are stained, open the cover of
the printer and then wipe ink off the protrusions using a swab or
the like as shown.
Important
Before cleaning, be sure to turned off the printer.
Printed on the back side
of the sheet/The roller
inside the printer is
extremely dirty
Follow the steps described below to clean the inside of the printer.
1. Ensure that the printer is turned on.
2. Load the Glossy Photo paper (4"×6"/ 101.6×152.4mm paper).
3. Hold the RESUME/CANCEL button down and release after the
POWER lamp flashes five times, then feed the sheet of paper.
After the cleaning is operated for a few seconds, the paper
comes out.
note
If the problem remains after performing, repeat this procedure
starting with step 1.
If the problem remains, contact a Canon service representative.
Important
Check that your paper is loaded with the correct print side facing up.
Inappropriate paper type Check to see if the paper you are printing on is too thick or curled.
used
See “Print Media to Avoid” on page 18.
Note that smudging may occur at the top and bottom edges of the
paper when using Borderless Printing.
note
If this does not solve the problem, set the paper thickness lever on
the left. See “Paper Thickness Lever” on page 8.
* Replace the paper thickness lever on the right after printing.
70
Troubleshooting
Possible Cause
Try This
Curled paper used
If all four corners or the printing surface of the paper is curled, the
paper may become dirty or the paper may not feed properly. Use
the paper after correcting paper curl as follows.
(1)Face up the printing surface*1, and cover it with a non-printing
regular paper to avoid damaging the surface.
(2)Roll up the paper in a direction opposite to paper curl as the
figure below.
(1)
(2)
*1
(3)Check the printing paper if paper curl is corrected within
approximately 2 to 5 mm *2.
It is recommended to print the curl-corrected paper one sheet at
a time.
*1
*2
note
Sets time to dry ink on the printing surface.
In case the ink is still wet and the print surface becomes dirty, set longer time to dry
ink.
1 Select Tool Box from the menu.
2 Select Ink drying wait time.
3 Select Long or Longer and then press the OK button.
71
Troubleshooting
Printer Does Not Start or Printer Stops During Print Jobs
Possible Cause
Try This
Print head has
overheated due to long
periods of continuous
printing
Stop printing and turn the printer off for at least 15 minutes to
allow the print head to cool down.
The print head tends to overheat when printing continuously for
long periods of time. The print head is designed to automatically
pause at line breaks before resuming printing in order to cool
down.
Caution
The area around the print head can become extremely hot during
extended print operation. Always avoid touching the print head
and its peripheral components.
Printing high-resolution Wait until the print job finishes.
photographs
The POWER lamp flashes green while the print data is being
processed. Printing photographs can take time.
The infrared
communication distance
or the infrared port angle
is incorrect
72
Place the printer at a distance of 7.9 inch/20 cm from the mobile
phone.
Ensure that the infrared ports are at a proper angle and there are
no obstacles between them. Retry printing.
The allowable distance and angle for infrared communication
depend on the functions of the mobile phone in addition to
environmental conditions.
See “Printing Photos with Infrared Compatible Mobile Phones” on
page 44.
Troubleshooting
Cannot Print Properly from the Digital Camera
The following are the possible errors that may occur when printing directly from a
digital still camera or digital video camcorder*, and the countermeasures to
eliminate them.
* Hereafter, the digital still camera and digital video camcorder are collectively
called a digital camera or camera.
note
• PictBridge or Canon Bubble Jet Direct compatible digital cameras can be connected
to your printer for direct printing.
• This section describes errors that are indicated on Canon-brand PictBridge- or
Bubble Jet Direct-compatible cameras. The error messages and operations may vary
depending on the camera you are using.
For errors on non-Canon PictBridge-compatible cameras, count the number of
flashes the POWER lamp on the printer makes and check for the cause of the error
and take the appropriate action. For details, See “Handling Error Messages” on
page 67.
• Connecting a digital camera not compatible with “PictBridge” or “Bubble Jet Direct”
makes the POWER lamp on your printer flash nine times. In such a case, unplug the
cable connecting the camera to the printer, press the RESUME/CANCEL button on
the printer.
• A communication time out occurs if printing takes a long time or if it takes too much
time to send data. This may stop printing. In such a case, disconnect the cable
between the printer and the camera, press the RESUME/CANCEL button on the
printer, and reconnect the cable between the printer and the camera. Then, turn the
camera on, if it does not automatically turn on. If the problem is still unresolved,
select some other photo and check if it can be printed or not.
• The print head nozzles may be clogged if printing becomes faint or colors are
incorrect.
See “When Printing Becomes Faint or Colors are Incorrect” on page 55.
• If the paper is curled or its surface is scratched during printing, make sure that you
are using the correct type of paper.
If printed surface is scratched even if the appropriate media type is used, set the
paper thickness lever on the left. See “Printing Maintenance” on page 55.
• For the errors indicated on the camera and their solution, also refer to the user’s
manual of the camera. For other troubles on the digital camera, contact the
manufacturer.
73
Troubleshooting
Camera Error Message
Try This
Printer in use/Printer
warming up
• Photos are being printed from the computer.
Wait until printing ends. The printer automatically starts printing
the photos from the camera after completing the current
printing.
• Wait until warm-up ends. When it is ready, the printer starts
printing automatically.
No paper/Paper error
Load the paper, and select Continue*1 in the display on your
camera.
Paper Jam
Select Stop in the display on your camera to stop printing.
Remove the jammed paper, load new paper, and press the
RESUME/CANCEL button on the printer and retry printing.
Printer cover open
Close the cover on the printer.
No print head
The print head is defective or not installed. (The POWER lamp on
the printer flashes five times.)
Install a print head. See “Installing the Print Head” on page 5.
If the print head has already been installed, press the POWER
button to turn off the printer, and press the POWER button again to
turn on the printer. If the same error occurs, the print head may be
defective. Contact a Canon service representative.
Waste tank (ink
absorber*2) full
The printer has a built-in waste ink absorber to hold the ink used
during print head cleaning. This error message indicates that the
waste ink absorber is nearly full.
You can continue printing for a while by selecting Continue*1 in
the display on your camera.
However, because printing is disabled once the waste ink absorber
becomes completely full, you are recommended to contact a Canon
service representative as early as possible.
No Ink
Install an ink tank. Be sure to press the PUSH mark on the ink tank
to ensure it is firmly seated.
Printer error
An error requiring servicing might have occurred (the POWER lamp
on the printer flashes alternately orange and green).
Select Stop in the display on your camera to stop printing.
Disconnect the cable between the printer and the camera, turn off
the printer, and unplug the power cord of the printer from the
power supply. After a while, plug the power cord of the printer back
in, turn on the printer, and then reconnect the camera to the
printer.
If the same error occurs, contact a Canon service representative.
*1: To resume printing, you can press the RESUME/CANCEL button on the printer
instead of selecting Continue.
*2: The waste ink absorber absorbs ink used at cleaning. Check the printer for proper
operation.
74
Troubleshooting
Cannot Install the Printer Driver
Possible Cause
Unable to proceed
beyond the Printer Port
Screen
Other applications
running in the
background
Try This
Reinstall the printer driver
1. Click Cancel.
2. Click Start Over on the Installation
Failure screen.
3. Click Back on the Easy Install screen.
4. Click Exit on the Welcome screen, then
remove the CD-ROM.
5. Turn the printer off.
6. Restart the computer.
7. Carefully follow the procedures described
and reinstall the driver. See “Installing
the Printer Driver” on page 49.
Other applications opened on your computer can interfere with the
installation routine. Close all open software applications before
reinstalling the printer driver.
See “Installing the Printer Driver” on page 49.
Installation does not start
automatically when the If printer driver installation did not start automatically when you
CD-ROM is inserted into inserted the CD-ROM into the CD-ROM drive:
the drive
1. Click Start and select My Computer.
2. Double-click the CD-ROM icon.
For Windows 2000, open the My Computer window, and then
double-click the CD-ROM icon.
Double-click the CD-ROM icon on your desktop to start installation.
Installation CD-ROM not Ensure that there are no problems with the Setup Software & User’s
working properly
Guide CD-ROM.
Use Windows Explorer to ensure that the CD-ROM can be read.
Installation procedure
not followed correctly
Ensure that the CD-ROM icon is displayed on the desktop.
If there is any problem with the CD-ROM, contact a Canon service
representative.
Install the printer driver again if you did not follow the installation
procedure properly.
See “Installing the Printer Driver” on page 49.
If the installer was forced to terminate due to an error, remove the
CD-ROM from the CD-ROM drive and restart your computer.
Reinstall the printer driver. If this problem persists, contact a Canon
service representative.
Not supported OS is used
Use a computer equipped on which Windows XP or Windows 2000
can operate.
Use a Macintosh series computer equipped with USB interface on
Mac OS X v.10.2.1 to v.10.3.x can operate.
75
Appendix
Appendix
Specifications
Printer
Printing resolution:
4800×1200 dpi. max.
(Ink droplets can be placed in a pitch of 1/4800 inch at minimum.
Supported only when printing with a computer.)
Print speed
Approx. 85 seconds
* Based on printing Canon standard pattern on 4"×6"/101.6×152.4mm
Photo Paper Plus Glossy with borderless print.
Print speed may vary according to conditions of use such as print
mode and image.
Print width:
94.8mm max. (3.732in)
(for Borderless Printing: 101.6mm/ 4.0 in)
Resident print control mode:
Canon extended mode
Receive buffer:
42 KB
Interface:
USB/IrDA Ver. 1.2/ Direct Print Port/Video Out (NTSC model/PAL model)
Acoustic noise level:
Approx. 39 dB (A) (in the highest print quality mode)
Operating environment:
Temperature: 5 to 35°C (41 to 95°F)
Humidity: 10 to 90%RH (no condensation)
Storage environment:
Temperature: 0 to 40°C (32 to 104°F)
Humidity: 5 to 95% RH (no condensation)
Power supply:
AC 110-120 V, 50/60 Hz
AC 220-240 V, 50/60 Hz
Power consumption:
Off: Approx. 1W
Standby: Approx. 3 W
Printing: Approx. 12 W
Dimensions
(with the paper support and
paper output tray retracted):
215mm/8.465in (W)×217mm/8.543in (D)×79mm/3.11in (H)
Weight:
Approx. 1.8 kg (4 lb.)
Print Head:
Cyan, Magenta, Yellow: 128 nozzles per each color (600 dpi)
Ink Tank:
Capacity (pages):
Color (BCI-16 Color) approx. 75 *1
*1
Based on printing continuously Canon 24 standard images taken with
the digital camera on 4"×6"/101.6×152.4mm paper with borderless
print.
Capacity (pages) may vary according to conditions of use such as print
mode and image.
Supported recording media:
Compact Flash, Microdrive, Smart Media, Memory Stick, MagicGate
Memory Stick, Memory Stick PRO, SD card, Multimedia card, xD-Picture
Card*, Memory Stick DUO*, miniSD Card*
* Can be used with the addition of a special adapter sold separately.
Supported recording formats: JPEG (DCF/CIFF/Exif2.2 or earlier/JFIF), TIFF (Exif compliant), DPOF
compliant
76
Appendix
Camera Direct Print
„ Canon Bubble Jet Direct
Compatible Paper:
Card #1 (Photo Paper Pro 4"×6" /101.6×152.4 mm), Card #2(Photo
Paper Plus Glossy Photo Paper Plus Semi-gloss or Glossy Photo Paper
4"×6" /101.6×152.4 mm), Card #3(not applicable), LTR (not applicable),
A4 (not applicable)
Layout Print:
Standard: Borderless / with border, Index Print: 15-80 images
Print Quality:
Standard
Image Optimize:
Exif Print
Date Print:
Supported
DPOF Functions:
Ver. 1.00 compatible (Index print, number of copies, select images, print
special characters (date))
„ PictBridge
Paper size:
Default (selections based on the printer setting), 10×15cm/4"×6"
(Photo Paper Plus Glossy/Photo Paper Pro/Glossy Photo Paper/Photo
Stickers), 5.4×8.6cm/Credit Card (Glossy Photo Paper Credit Card Size)*
Paper type:
Default (selections based on the printer setting), Photo (Photo Paper
Plus Glossy), Fast (Photo Paper Pro)
Layout:
Default (selections based on the printer setting), Borderless, Bordered
When 4"×6" is selected from “Paper size”, 2-up, 4-up, 9-up, and 16-up
options may be available in “Layout”.
Image optimize:
Default (selections based on the printer setting), “VIVID”*, “NR” (Noise
Reduction)*, “VIVID+NR”*
* If using a Canon PictBridge-compatible camera, you can select it.
Date print
Default (Off: No printing)
BJ Printer Driver Systems Requirements
• Use a computer equipped on which Windows XP • Use a Macintosh series computer equipped with
USB interface on Mac OS X v.10.2.1 to v.10.3.x
or Windows 2000 can operate.
can operate.
• USB interface
• Available hard-disk space for printer driver
• Available hard-disk space for printer driver
installation:100 MB
installation (including temporary files)
• The following functions are not supported when
:50MB (including the capacity for the electric
using Mac OS X v.10.2.1 to v.10.3.x
manual)
- Photo Optimizer PRO
USB operation can only be guaranteed on a PC with
- Poster Printing
preinstalled Windows XP or Windows 2000. (This
- Fit to Page Printing
includes Windows XP or Windows 2000 upgraded
- Reverse Order Printing (except for Mac OS X
from pre-installed Windows 98 or later)
v.10.3.x)
Additional Systems Requirements for Electronic User’s Guide
• 15 MB free hard disk space
• Windows: Microsoft® Internet Explorer 5.0 or later.
• Mac OS: Microsoft® Internet Explorer 5.0 or later, Safari 1.0 or later.
77
Appendix
Safety Precautions
Please read the safety warnings and cautions provided in this manual to ensure
that you use your printer safely. Do not attempt to use printer in any way not
described in this manual.
Warning
You may cause an electric shock/fire or damage the printer if you ignore any of these safety
precautions.
Choosing a Location Do not place the printer close to flammable solvents such as alcohol or thinners.
Never attempt to plug in or unplug the printer from the power supply when your hands are
Power supply
wet.
Always push the plug all the way into the power outlet.
Never damage, modify, stretch or excessively bend or twist the power
cord. Do not place heavy objects on the power cord or universal AC
Adapter.
Never plug the printer into a power socket that is shared with other
equipment (extension lead/cord, 2- or 3-way adapter, etc.).
Never use the printer if the power cord is bundled or knotted.
If you detect smoke, unusual smells or strange noises around the printer, immediately unplug
the printer at the power supply and call for service.
Periodically, unplug the printer and use a dry cloth to wipe off any
dust or dirt collected on the plug and the power outlet.
If the printer is placed at a location exposed to a lot of dust, smoke, or
high humidity, the dust collected on the plug absorbs moisture and
may cause insulation failure and fire.
Cleaning the printer
Maintaining the
printer
Working around the
printer
78
Use a damp cloth to clean the printer. Never use flammable solvents
such as alcohol, benzene or thinners.
If flammable solvents come in contact with electrical components
inside the printer, it could cause a fire or electric shock.
Always unplug the printer from the power outlet before cleaning the printer.
If you accidentally switch the printer on while cleaning it, you could injure yourself or damage
the printer.
Do not attempt to disassemble or modify the printer. There are no user serviceable parts
inside the printer.
The printer contains high-voltage components. Never attempt any maintenance procedure not
described in this guide.
Do not use flammable sprays near the printer.
This could cause a fire or electric shock if the spray comes into contact with electrical
components inside the printer.
Appendix
About the Lithium
Coin Cell Battery
CR2025
Use a lithium coin cell battery CR2025. If you use an incorrect one, an explosion may occur.
Discard used batteries according to the local laws and regulations.
Do not heat or throw the battery into a fire or soak it into water. It may cause fire or personal
injury due to a battery explosion or liquid leakage.
Do not disassemble, modify, or heat a battery. It may cause personal injury due to liquid
leakage. If battery leakage occurs, thoroughly wash the affected skin and clothes. Keep
battery acid away from your eyes and mouth.
Keep a battery away from children. If your child swallows the battery, contact your doctor
immediately. It may cause severe damage to stomach and intestinal tissue.
Before you discard a battery, cover the terminals with tape or other insulators to prevent
direct contact with other objects. Contact with the metallic components of other materials in
waste containers may lead to fire or explosions.
Caution
You may cause injury or damage the printer if you ignore any of these safety precautions.
Choosing a location
Power supply
Do not install the printer in a location that is unstable or subject to excessive vibration.
Do not install the printer in locations that are very humid or dusty, in direct sunlight,
outdoors, or close to a heating source.
To avoid the risk of fire or electric shocks, install the printer in a location with an ambient
temperature range of 5°C to 35°C (41°F to 95°F) and humidity of 10% to 90% (condensation
free).
Do not place the printer on a thick rug or carpet.
Ensure that the area around the power outlet is kept clear at all times
so you can easily unplug the power cord if necessary.
Never remove the plug by pulling on the cord.
Do not use an extension lead/ cord.
Working around the
printer
Print heads and ink
tanks
Never use a power supply source other than the one rated for the printer in the country where
you purchased the printer.
AC 110-120 V, 50/60 Hz
AC 220-240 V, 50/60 Hz
Never put your hands or fingers in the printer while it is printing.
Do not place metal objects (paper clips, staples, etc.) or containers of flammable solvents
(alcohol, thinners, etc.) on top of the printer.
If any foreign object (metal or liquid) fall into the printer, unplug the power cord and call for
service.
For safety reasons store print heads and ink tanks out of the reach of small children.
If a child ingests any ink, consult a doctor immediately.
Do not shake print heads or ink tanks.
Ink may leak out and stain clothing or the surrounding area.
79
Appendix
Regulatory Information
„ Color Printer Model: K10248 (DS700)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of a shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If
such changes or modifications should be made, you could be required to stop operation of the equipment.
Canon U.S.A., Inc.
One Canon Plaza
Lake Success, NY 11042
1-516-328-5600
For 220-240V, 50/60Hz model
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If
such changes or modifications should be made, you could be required to stop operation of the equipment.
80
Appendix
„ Remote Control: K30240 (RC-10)
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Do not make any changes or modifications to the equipment unless otherwise specified in the manual.
If such changes of modifications should be made, you could be required to stop operation the equipment.
„ Canadian Radio Interference Regulations
This digital apparatus does not exceed Class B limits for radio noise emissions from a digital apparatus
as set out in the interference-causing equipment standard entitled “Digital Apparatus”, ICES-003 of the
Industry Canada.
Cet appareil numérique respecte les limites de bruits radio éléctiques applicables aux appareils
numériques de Classe B prescrites dans la norme sur le matériel brouilleur: “Appareils Numériques”,
NMB-003 édictée par l’Industrie Canada.
81
Index
Index
Numerics
D
101.6 × 152.4mm/ 4"×6" paper ................... 19
Date display format ................................. 12, 36
Date print ......................................................34
Date print (PictBridge) ...................................42
Deep Cleaning ......................................... 12, 58
Direct Print Port ...............................................7
Direct Printing from PictBridge-compatible
Digital Cameras .........................................41
Display Photo received via infrared ......... 12, 47
Displaying a Photo on TV ...............................13
Displaying Photos Automatically at the
Full TV Screen ............................................23
DPOF print ............................................... 11, 32
DS700 User’s Guide ......................................54
A
A Message is Displayed on TV ....................... 65
Accompanied by ink tank icon with '?' ........... 66
Additional Systems Requirements for
Electronic User’s Guide ............................. 77
Aligning the Print Head ................................. 59
B
Back Button .................................................... 8
Basic settings ............................................... 34
BCI-16 Color ................................................. 60
BJ Printer Driver Systems Requirements ........ 77
Borderless print ............................................ 34
Borderless Printing (PictBridge) .................... 42
Brightness .................................................... 69
Bubble Jet Direct ......................................39, 43
Bubble Jet Direct (Specifications) .................. 77
Bubble Jet Direct (Troubleshooting) .............. 73
C
Cancel all ...................................................... 25
Cancel Button (Remote Control) ...................... 8
Cancel the search mode ................................ 35
Cannot Install the Printer Driver .................... 75
Cannot Print Properly from the
Digital Camera .......................................... 73
Card Slot ........................................................ 7
Changing the Language Displayed ................ 37
Clean the inside of the printer ....................... 70
Clean the paper feed rollers .......................... 68
Cleaning ....................................................... 57
Color adjust .............................................12, 69
Color hue ...................................................... 69
CompactFlash (CF) card ................................. 15
Confirming or Changing the Camera Settings
(PictBridge) ............................................... 41
Connecting to a Digital Camera ..................... 39
Connecting to TV ........................................... 13
Contrast ....................................................... 69
Copies [+][-] Buttons ....................................... 8
Correcting paper curl .................................... 71
Cover .............................................................. 7
Cover open switch .......................................... 8
Custom Install .............................................. 50
82
E
Easy Install ....................................................50
Error code ......................................................66
Examining the nozzle check pattern ..............56
F
Face brightener .............................................34
G
Glossy Photo Paper .......................................20
H
Handling Error Messages ...............................67
Handy Functions and Settings .......................33
Head alignment ....................................... 12, 59
Head alignment print ............................... 12, 60
Head Cleaning ......................................... 12, 57
How Low Ink Warning Setting Works ..............63
How to Print All Photos without
Connecting to TV .......................................30
How to View the User’s Guide— Macintosh ....54
How to View the User’s Guide— Windows ......54
I
Image optimize (PictBridge) ..........................42
Indicator Lamp ................................................7
infrared communication ................................44
infrared communication (Troubleshooting) ....72
Infrared port ..................................................46
Infrared print ........................................... 12, 45
Ink counter reset ..................................... 12, 62
Index
Ink drying wait time .................................12, 71
Ink tank .....................................................6, 60
Ink Tank BCI-16 Color ................................3, 60
Inserting a Memory Card ............................... 16
Installing an Ink Tank ...................................... 6
Installing the Print Head ................................. 5
Installing the Printer Driver— Macintosh ....... 51
Installing the Printer Driver— Windows ......... 49
IrDA .............................................................. 44
L
Languages ...............................................12, 37
Layout (Infrared print) ................................... 45
Layout (PictBridge) ....................................... 42
Layout print .............................................11, 27
Lithium coin cell battery ................................. 3
Lithium coin cell battery CR2025 .................. 10
Lithium Coin Cell Battery CR2025
(Safety Precautions) .................................. 79
Loading the Print Media ................................ 18
Low Ink Warning ........................................... 63
M
MagicGate Memory Stick .............................. 15
MagicGate Memory Stick Duo ....................... 15
Media Type ..............................................20, 34
Media Type (Infrared print) ........................... 45
Media Types for Digital Camera
(Bubble Jet Direct) ..................................... 43
Memory Card Utility ...................................... 52
Memory Cards Supported by this printer ....... 15
Memory Stick ............................................... 15
Memory Stick Duo ........................................ 15
Memory Stick PRO ........................................ 15
Memory Stick PRO Duo ................................. 15
Menu Button ................................................... 8
Menu Screen ................................................ 11
Microdrive .................................................... 15
miniSD Card ................................................. 15
Mobile Phone ............................................... 44
Mobile phone (Troubleshooting) ................... 72
Multimedia Card ........................................... 15
N
Next .............................................................. 25
Noise reduction ............................................ 34
Nothing is Displayed on TV/Image is Poor ..... 64
Nozzle check ...........................................12, 56
O
OK Button ....................................................... 8
Operating the Remote Control .........................9
Operation Panel ..............................................7
Optimizer ......................................................34
P
Page size ................................................. 20, 34
Page size (Infrared print) ...............................45
Paper Does Not Feed Properly ........................68
Paper Guide ....................................................7
Paper jam ......................................................67
Paper Jams ....................................................68
Paper Output Tray ...........................................7
Paper size (PictBridge) ..................................41
Paper Support .................................................7
Paper support Load Limit ...............................20
Paper Thickness Lever ............................... 8, 19
Paper type (PictBridge) ..................................41
Paste all ........................................................27
Paste one by one ...........................................27
Photo Gallery .......................................... 11, 21
Photo Paper Plus Glossy ................................20
Photo Paper Plus Semi-gloss .........................20
Photo Paper Pro ............................................20
Photo Print .............................................. 11, 24
Photo Stickers ......................................... 19, 20
PictBridge ............................................... 39, 41
PictBridge (Specifications) ............................77
PictBridge (Troubleshooting) .........................73
POP ...............................................................34
POWER Button .................................................7
Power Button (Remote Control) ........................8
Power Cord ......................................................3
Power Cord Connection ...................................8
POWER Lamp ............................................. 7, 68
POWER Lamp (Troubleshooting) ....................67
Preparing the Printer .......................................4
Previous ........................................................25
Print all ................................................... 11, 30
Print All Button .......................................... 7, 31
Print Button (Remote Control) ..........................8
Print Head ................................................... 3, 5
Print Head Cleaning .......................................57
Print Head Deep Cleaning ..............................58
Print Head Holder ........................................ 5, 8
Print Head Lock Lever ......................................8
Print Index .............................................. 11, 31
Print Media to Avoid ......................................18
Print Studio ............................................. 11, 26
Printed Surface is Scratched or Ink Blots .......70
Printer Does Not Start or Printer Stops
During Print Jobs .......................................72
Printer Driver (Troubleshooting) ....................75
83
Index
Printer Parts and Their Function ...................... 7
Printing a Photo by Displaying it on TV
(Infrared print) .......................................... 47
Printing a Photo List ..................................... 31
Printing a Photo with a Mobile Phone and
the Printer ................................................ 46
Printing According to the settings Made
on the Camera .......................................... 32
Printing All Photos ........................................ 30
Printing is Blurred/Colors are Wrong/White
Streaks appear ......................................... 69
Printing Maintenance ................................... 55
Printing on Photo Stickers (Infrared print) ..... 45
Printing on Photo Stickers (PictBridge) ......... 42
Printing Photographs Directly from a Canon
Bubble Jet Direct Compatible Digital Camera ... 43
Printing Stickers ........................................... 28
Printing the Nozzle Check Pattern ................. 56
Printing with the computer ........................... 49
R
Regulatory Information ................................. 80
Remaining ink level indicator setting .......12, 66
Remote Control ............................................... 3
Remote Control (The function of buttons) ........ 8
Remote Control (Troubleshooting) ................ 65
Remote control receiver/Infrared port ............. 7
Removing a Memory Card ............................. 17
Replacing an Ink Tank ................................... 60
Requirements for Infrared Communication
with the Mobile Phone .............................. 44
Reset .......................................................12, 38
Resetting ...................................................... 38
Resetting All Settings ................................... 38
Resetting the Ink Counter ............................. 62
RESUME/CANCEL Button ................................. 7
Rotate Button ................................................. 8
Slide Show ....................................................23
SmartMedia ..................................................15
Specifications ...............................................76
Specifying the Layout ....................................26
Specifying the number of copies to print
for each photo ...........................................24
Specifying the Paper and Other Settings .......33
Sticker print ............................................ 11, 29
Stickers ×16 ..................................................28
T
The Remote Control is not Working ................65
Tool Box ........................................................12
Troubleshooting ............................................64
Turning off TV and the printer ........................14
Turning on TV and the Printer ........................14
U
Unpack the Printer ..........................................3
USB Port .........................................................8
User’s Guide Table of Contents ......................54
Using a Memory Card ....................................15
V
Video Cable (RCA) ............................................3
Video Out Terminal ..........................................8
Viewing Each Photo on TV and Printing ..........21
Vivid Photo ....................................................34
W
Waste ink absorber .......................................67
When Printing Becomes Faint or Colors are
Incorrect ....................................................55
X
xD-Picture Card .............................................15
S
Z
Safety Precautions ........................................ 78
SD Memory Card ........................................... 15
Search .......................................................... 35
Search Button ............................................8, 35
Searching for Photos with the Shooting Date 35
Selecting Various Print Option ...................... 26
Sets time to dry ink on the printing surface ... 71
Setting or Replacing the Battery ................... 10
Setting the Date Display Format .................... 36
Setting the Media Type, Paper Size, and Layout
(Infrared print) .......................................... 44
Settings button ............................................. 33
Zoom Button ...................................................8
84
T2202D_PPG_US_Cover.fm Page 1 Tuesday, July 20, 2004 4:19 PM
Photo Printing Guide
The following ink tank is compatible with DS700.
For details on ink tank replacement, refer to “Replacing an Ink Tank” in this guide.
QA7-3336-V01
XXXXXX
©CANON INC.2004
PRINTED IN THAILAND
Download PDF

advertising