Canon IP2000 Printer User Manual

Quick Start Guide
Table of Contents
Preface
1
Shipping Materials
1
Introduction
1
Setting Up
Preparing the Printer
3
Installing the Print Head
4
Loading Paper
7
Installing the Printer Driver
9
Printing with Windows
QA7-3266-V01
©CANON INC.2004
PRINTED IN THAILAND
2
Connecting the Printer to the Computer
Basic Operations
The following ink tanks are compatible with this printer.
For details on ink tank replacement, refer to “Print Head Maintenance” in this guide.
2
14
14
Printing with Macintosh
17
Print Head Maintenance
19
Appendix
21
Printing Photographs Directly from a Digital Camera
21
Notes on Handling the USB Interface (for Windows Users)
25
For Further Details...
25
BE
QA7-3266-V01
Regulatory Information
Exif Print
This printer supports Exif Print.
Exif Print is a standard for enhancing the communication between digital cameras and printers. By
connecting to an Exif Print-compliant digital camera, the camera’s image data at the time of shooting is
used and optimized, yielding extremely high quality prints.
Canadian Radio Interference Regulations
This digital apparatus does not exceed the Class B limits for radio noise emissions from a digital
apparatus as set out in the interference-causing equipment standard entitled “Digital Apparatus,”
ICES-003 of the Industry Canada.
Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils
numériques de Classe B prescrites dans la norme sur le matériel brouilleur NMB-003 d'Industrie
Canada intitulée « Appareils numériques ».
International ENERGY STAR® Program
As an ENERGY STAR® Partner, Canon Inc. has determined that this product meets the ENERGY
STAR guidelines for efficiency.
The International ENERGY STAR® Office Equipment Program is a global program
that promotes energy saving through the use of computer and other office equipment.
The program backs the development and dissemination of products with functions
that effectively reduce energy consumption. It is an open system in which business
can participate voluntarily. The targeted products are office equipment such as computers, monitors, printers, faxes and copiers.
Their standards and logos are uniform among participating nations.
Power Requirements
Never use a power supply voltage other than that supplied in the country of purchase. Using the incorrect voltage could cause a fire or electric shock. The correct power supply voltages and frequencies are
as follows:
AC 110-120 V, 50/60 Hz
AC 220-240 V, 50/60 Hz
For 220-240V, 50/60Hz model
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
Do not make any changes or modifications to the equipment unless otherwise specified in the
manual. If such changes or modifications should be made, you could be required to stop operation
of the equipment.
For 110-120V, 50/60Hz model
Color Printer Model: K10239
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
„
„
„
„
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Use of a shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC
Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the
manual. If such changes or modifications should be made, you could be required to stop operation
of the equipment.
Canon U.S.A., Inc.
One Canon Plaza
Lake Success, NY 11042
1-516-328-5600
Printer Model: K10239
iP1000_1500_2000_UK.fm Page 1 Thursday, May 6, 2004 3:40 PM
Preface
Shipping Materials
Thank you for purchasing a Canon Bubble Jet Printer.
Check that all the following items are in the box. If anything is missing or is damaged, contact your local
Canon sales representative.
‰ Printer
‰ Setup Software & User’s Guide CD-ROM
‰ Quick Start Guide
‰ Print Head
‰ BCI-24 Black and BCI-24 Color Ink Tanks
‰ Power Cord
* A USB cable should be purchased separately according to your computer. For details on cable
specifications, refer to page 3.
Introduction
This Quick Start Guide uses the following symbols to indicate important information. Always observe the
instructions indicated by these symbols.
Instructions that, if ignored, could result in death or serious personal injury caused by incorrect
operation of the equipment. These must be observed for safe operation.
Instructions that, if ignored, could result in personal injury or material damage caused by incorrect
operation of the equipment. These must be observed for safe operation.
Also read the Safety Precautions in the User’s Guide. Observe the warnings and cautions to avoid
personal injury or damage to the printer.
Trademark Notices
• Canon® is a registered trademark of Canon Inc.
• PIXMA and BJ is a trademark of Canon Inc.
• Microsoft® and Windows® are registered trademarks of Microsoft Corporation in the U.S. and other
countries.
• Apple, Mac, Macintosh are trademarks of Apple Computer, Inc., registered in the U.S. and other
countries.
• All other trademarks and registered trademarks appearing in this Quick Start Guide are the property of
their respective owners.
Copyright ©2004 CANON INC.
All rights reserved. No part of this publication may be transmitted or copied in any form whatsoever
without the express written permission.
1
iP1000_1500_2000_UK.fm Page 2 Thursday, May 6, 2004 3:40 PM
Setting Up
1 Preparing the Printer
1 Place the printer on a flat surface.
2 Remove the tape from the printer as
shown.
The tape position is subject to change.
3 Open the Front Sheet Feeder and the
Front Cover.
4 Remove the tape and the shipping
material.
5 Close the Front Cover.
Front Sheet Feeder
Front Cover
2
iP1000_1500_2000_UK.fm Page 3 Thursday, May 6, 2004 3:40 PM
2 Connecting the Printer to the Computer
Use a USB cable.
Recommended: Canon or other computer manufacturer cable, up to 5 meters in length.
• If your computer has an earth connection, make sure that this is attached.
• If you do not intend to use the printer for a long period of time, unplug the power cord from the
power outlet after turning off the printer.
Follow the steps below to install the printer driver
correctly.
1 Ensure that the printer and the
computer are turned off.
2 Connect the cable.
If the Add New Hardware Wizard or Found New Hardware
Wizard screen appears when carrying out the following operations,
click Cancel and turn off the computer.
3
iP1000_1500_2000_UK.fm Page 4 Thursday, May 6, 2004 3:40 PM
3 Installing the Print Head
• Never attempt to plug the power cord into the power outlet or unplug the power cord when your
hands are wet.
• Never damage, modify, stretch, or excessively bend or twist the power cord. Do not place heavy
objects on the power cord.
• Never use any power supply other than the standard power supply available in the country of
purchase. Using the incorrect voltage and frequency could cause a fire or electric shock.
• Always push the plug all the way into the power outlet.
„ Installing the Print Head
1 Plug the printer in.
2 Turn on the printer. Do NOT turn on the
computer yet.
The POWER lamp flashes and the printer begins to
operate. Wait until the POWER lamp remains fully lit.
ON
3 Open the Front Sheet Feeder and the
Front Cover.
The Print Head Holder moves to the center.
Print Head Holder
Lock Lever
4 Raise the Lock Lever.
Do not touch internal parts other than the Lock Lever.
4
iP1000_1500_2000_UK.fm Page 5 Thursday, May 6, 2004 3:40 PM
5 Remove the protective cap from the
Print Head.
• Do not touch the Print
Head Nozzles or
electrical contacts.
• Do not attempt to
reattach the protective
cap once it has been
removed.
Print Head
Print Head
Nozzles
electrical
contacts
6 Place the Print Head in the holder.
7 Lock the Print Head into place by
lowering the lever.
Do not touch the Lock Lever once the Print Head has
been installed.
5
iP1000_1500_2000_UK.fm Page 6 Thursday, May 6, 2004 3:40 PM
„ Installing the Ink Tanks
• For safety reasons, store ink tanks out of the reach of small children.
• Do not drop or shake ink tanks as this may cause the ink to leak out and stain your clothes and hands.
1 Take out the black ink tank.
protective cap
2 Hold the ink tank as shown in the
diagram and remove the protective cap.
ink port
• Do not touch the ink port.
• Do not attempt to reattach the
protective cap once it has
been removed.
3 Insert the black ink tank into the righthand slot.
4 Press the tab until it clicks into place.
5 Use the same procedure to install the
color ink tank in the left-hand slot.
6 Close the Front Cover.
Wait until the POWER lamp remains fully lit (about 60
seconds).
6
iP1000_1500_2000_UK.fm Page 7 Thursday, May 6, 2004 3:40 PM
4 Loading Paper
„ Loading A4 (Letter) Size Plain Paper in the Auto Sheet Feeder
1 Open the Paper Support and the Front
Sheet Feeder. And then, pull out the
Paper Output Tray completely as
shown.
2 Open the Front Cover.
Paper Thickness Lever
3 Move the Paper Thickness Lever at the
top of the Print Head Holder to the left
position. Close the Front Cover.
Set the Paper Thickness Lever to the left when using
plain paper, to the right when using thick paper.
Refer to the User’s Guide for information on loading
envelopes and other media.
print side
4 Load the paper, aligning it with the right
side of the Auto Sheet Feeder.
You can load a maximum of 150 sheets of plain paper
(64 gsm). Do not exceed this limit.
5 Pinch the Paper Guide and slide it
against the left side of the stack of
paper.
7
iP1000_1500_2000_UK.fm Page 8 Thursday, May 6, 2004 3:40 PM
Auto Sheet Feeder Lamp
6 Ensure that the Auto Sheet Feeder
Lamp is lit. If not, press the Paper Feed
Switch.
Paper Feed Switch
You now need to install the printer driver:
Windows:
Go to page 9
Mac OS X:
Go to page 12
• Other than the Auto Sheet Feeder, you can load
paper in the Front Sheet Feeder. For information
on loading the print media in the Front Sheet
Feeder, refer to the User’s Guide.
• You can select the paper source also from the
printer driver. For details, refer to the User’s
Guide.
8
iP1000_1500_2000_UK.fm Page 9 Thursday, May 6, 2004 3:40 PM
5 Installing the Printer Driver
„ Installing the Printer Driver – Windows
• Do not disconnect the cable or remove the CD-ROM during the installation. The driver cannot be
correctly installed.
• The screens below refer to Windows XP installation. Screen may differ depending on the operating
system you are using.
• When installing the printer driver in Windows XP, Windows 2000, log on to the system as a
member of the Administrators group.
If the following screen appears automatically, click Cancel and follow steps 1 to 9 to install the printer
driver.
Special Notes for Windows Me or Windows 98 USB Users
Click Cancel to quit the screen and turn off the printer. Next, remove and replace the USB cable
connected to your computer.
1 Ensure that the printer and computer
are turned off.
2 Turn on the computer and start
Windows. If any applications
automatically run, quit them.
OFF
Disable any virus detection programs.
Do NOT turn the printer on at this stage.
9
iP1000_1500_2000_UK.fm Page 10 Thursday, May 6, 2004 3:40 PM
3 Place the Setup Software & User’s
Guide CD-ROM in the CD-ROM drive.
• If the CD-ROM does not run automatically, click
Start and select My Computer, then double-click
the CD-ROM icon. For non-Windows XP, doubleclick My Computer in the Windows screen, then
double-click the CD-ROM icon.
• If the language selection screen appears, select a
language, then click Next.
• If the place selection message appears, select your
place of residence, then click Next.
4 Follow the instructions displayed on
screen. When the screen shown on the
left is displayed, click Easy Install.
When you select Easy Install, the items included in
the CD-ROM are installed automatically.
To select particular items to install, click Custom
Install and follow the instruction on the screen.
5 When the list of applications to install
appears, verify the contents, click
Install, then follow the instructions on
the screen.
6 Read the License Agreement and click
Yes.
7 When the screen shown on the left
appears, turn the printer on.
If the printer is recognized, the printer driver will be
automatically installed.
If the connection is not recognized, refer to the
section “Notes on Handling the USB Interface (for
Windows Users)” on page 25.
ON
10
iP1000_1500_2000_UK.fm Page 11 Thursday, May 6, 2004 3:40 PM
8 Click OK.
Some screens appear after clicking OK. Read the
content shown on the screens and click Next.
9 When the screen shown on the left
appears, click Exit.
You can restart the system by clicking Restart, which
will appears when you check the check box.
If ruled lines are displaced or the print result is
unsatisfactory, align the Print Head.
Refer to “Aligning Print Head” in the User’s Guide.
• To view the User's Guide, double-click the User's Guide short-cut icon on the desk top.
• For further information of applications and how to start them, refer to “Applications Included in the
CD-ROM Package” on page 26.
11
iP1000_1500_2000_UK.fm Page 12 Thursday, May 6, 2004 3:40 PM
„ Installing the Printer Driver – Macintosh
• Do not remove or insert the USB cable during installation, as this may result in the computer or
printer not operating normally.
• Before installing the driver, disable all virus detection programs and automatically loading
programs or remove them from your system folder.
• The Setup Software & User’s Guide CD-ROM contains the application software, Easy-PhotoPrint,
to import and print image data. If you want to install Easy-PhotoPrint, double-click the application
folder, then double-click the Easy-PhotoPrint folder, and Installer.
• For Mac OS 9.x users, refer to the Printer Driver Guide for Mac OS 9 for instructions on how to
install the printer driver. To view the Printer Driver Guide for Mac OS 9, double-click the Manual
folder and Additional Guide for OS 9 Users folder and select a language folder.
1 Turn on the Mac.
2 Place the Setup Software & User’s
Guide CD-ROM in the CD-ROM drive.
3 Double-click the Mac OS X folder, and
then double-click the Printer Driver
folder.
4 Double-click PIXMA iP2000 280.pkg.
5 Click Continue.
6 Read the License Agreement and click
Continue, then click Agree.
12
iP1000_1500_2000_UK.fm Page 13 Thursday, May 6, 2004 3:40 PM
7 Select a destination to where you want
to install the printer driver, and click
Continue.
8 Click Install.
9 Enter an administrator name and a
password, then click OK.
When you have forgotten the administrator name
and/or password, click
and follow the
instructions in Mac Help.
10 A message asking for your confirmation
to restart your computer is displayed on
the screen. Read the message, then
click Continue Installation.
Software installation will start.
11 Software installation is complete.
Restart your computer.
If ruled lines are displaced or the print result is
unsatisfactory, align the Print Head.
Refer to “Aligning Print Head” in the User’s Guide.
13
iP1000_1500_2000_UK.fm Page 14 Thursday, May 6, 2004 3:40 PM
Basic Operations
• If you detect smoke, unusual smells or strange noises around the printer, immediately switch the
printer off and always unplug the printer. Contact your local Canon service representative.
• To avoid injury, never put your hand or fingers inside the printer while it is printing.
Printing with Windows
Adjusting the print settings according to your needs allows you to produce better quality prints.
In this section, we will use NotePad for the purpose of explanation. The procedures and the screens that
appear on your computer may differ according to the application that you use.
„ Printing
1 Print the document from the application.
On the File menu, click Print.
Check the application’s user’s manual for the actual
procedures.
2 Ensure that your printer is selected,
then click:
• Windows XP oPreferences
• Windows Me/Windows 98 o Properties
• Windows 2000 oMain tab
3 Specify the required settings and click
OK.
• If you use anything other than plain paper, please
refer to “Basic Print Settings” on page 16.
• This section describes the procedure for selecting
the paper source with the Paper Feed Switch on
the printer. For details about the other settings for
specifying the paper source, refer to “Changing
the Paper Source” on the User’s Guide.
14
iP1000_1500_2000_UK.fm Page 15 Thursday, May 6, 2004 3:40 PM
Auto Sheet Feeder Lamp
4 Ensure that the proper lamp of the
paper source lights.
If not, press the Paper Feed Switch on the printer.
Front Sheet Feeder
Lamp
5 To start printing, click OK.
Printing will start in a few moments.
15
iP1000_1500_2000_UK.fm Page 16 Thursday, May 6, 2004 3:40 PM
„ Basic Print Settings
For the best print quality, specify the minimum requirement settings in the Main tab. To get the best
results, ensure that you select the type of media loaded in the printer when printing on paper other than
plain paper.
(7)
(1)
(2)
(3)
(4)
(5)
(6)
(1) Media Type
Select the media loaded in the printer.
(2) Paper Source
Select the setting here when you do not specify the paper source with
the Paper Feed Switch on the printer.
(3) Print Quality
Select one option from High, Standard and Draft. Select Custom to
set the print quality manually.
(4) Color Adjustment
If you wish to control the color adjustment settings in more detail,
select Manual.
(5) Preview before printing
Select this to check the layout before printing.
(6) Help
Click this for a more detailed explanation of the functions in the tab.
(This may not appear in Windows XP or Windows 2000. If this
happens, click Start and select All Programs (or Programs), Canon
PIXMA iP2000 and Guide).
(7) ?
Click this to change the cursor shape to “?”. By clicking on the item’s
name with this ? cursor, an explanation will be displayed.
• Clicking the Print Advisor allows you to change to the most appropriate print settings simply by
answering questions when prompted.
• Use the application to set the paper size and paper orientation. Before printing, open the settings
screen and check that the Page Size in the Page Setup tab is the same as that specified within
application.
• Refer to the User’s Guide for more information about printer driver functionality.
16
iP1000_1500_2000_UK.fm Page 17 Thursday, May 6, 2004 3:40 PM
Printing with Macintosh
Adjusting the print settings according to your needs allows you to produce better quality prints.
„ Printing
1 Open the Page Setup dialog box in
your application.
On the File menu, click Page Setup. Check the
application’s user’s manual for the actual procedures.
2 Specify the page setup, then click OK.
For details, refer to “Page Setup” on page 18.
3 Open the Print dialog box in your
application to print the document.
On the File menu, click Print. Check the application’s
user’s manual for the actual procedures.
4 Specify the print settings according to
your requirements.
For details, refer to “Basic Print Settings” on page 18.
Auto Sheet Feeder Lamp
5 Ensure that the proper lamp of the
paper source lights.
If not, press the Paper Feed Switch on the printer.
Front Sheet Feeder
Lamp
6 Click Print.
Printing will start in a few moments.
17
iP1000_1500_2000_UK.fm Page 18 Thursday, May 6, 2004 3:40 PM
„ Page Setup
Use the Page Setup dialog box to specify the Paper Size settings.
Select paper size
you wish to use.
„ Basic Print Settings
For the best print quality, specify the minimum requirement settings in the Print dialog box. Select
Quality & Media from the pop-up menu to change the display of the dialog box. To get the best results,
ensure that you select the media loaded in the printer when printing on paper other than plain paper.
(1)
(2)
(3)
(4)
(1) Media Type
Select the media loaded in the printer.
(2) Paper Source
Select the setting here when you do not specify the paper source with
the Paper Feed Switch on the printer.
(3) Print Mode
Select the type of document you want to print.
To specify more detailed settings for the print quality, click Detailed
Setting.
(4) Print
Click this to start printing.
• See Help for more information about other printer driver functions.
Click
in the Page Setup dialog box or the Print dialog box.
• Refer to the User’s Guide for more information about printer driver functions.
18
iP1000_1500_2000_UK.fm Page 19 Thursday, May 6, 2004 3:40 PM
Print Head Maintenance
„ If Blurring Occurs or If a Specific Color Does Not Print
Perform print head cleaning to improve the print quality. Ensure that the printer is turned on and
follow the instructions below.
Windows
Open the printer driver settings screen and click the Maintenance tab. Click Cleaning.
(1) Click Start and select Control Panel, Printers and Other Hardware and Printers and Faxes (For
non-Windows XP users, click Start, and then select Settings and Printers).
(2) Click the icon for your printer.
(3) Open the File menu and select:
In Windows XP or Windows 2000 o Printing Preferences
In Windows Me or Windows 98 o Properties
to open the setting screen.
Macintosh
Open the BJ Printer Utility, and select Cleaning from the pop-up menu. Click Cleaning.
(1) Double-click the hard disk icon where the printer driver was installed, the Applications folder, and
the Utilities folder.
(2) Double-click the Printer Setup Utility icon.
If you are using the OS other than Mac OS X v.10.3, double-click the Print Center icon.
(3) Select iP2000 from the Name list and click Utility or Configure.
(4) Select iP2000 from the Product list and click Maintenance.
to open the BJ Printer Utility dialog box.
„ When the Printer Runs out of Ink
Replace the empty ink tank with a new one.
Specify the following ink tanks when purchasing.
Ink Tank BCI-24 Color
Ink Tank BCI-24 Black
1 Open the Front Cover and remove the
empty ink tank.
Do not touch the Lock Lever.
color
black
Lock Lever
19
iP1000_1500_2000_UK.fm Page 20 Thursday, May 6, 2004 3:40 PM
2 Install the new ink tank.
Close the Front Cover when finished.
When you enable the low ink warning, reset the ink
counter of the ink tank installed.
Refer to the User’s Guide for more detailed
procedures and information about maintenance.
20
iP1000_1500_2000_UK.fm Page 21 Thursday, May 6, 2004 3:40 PM
Appendix
Printing Photographs Directly from a Digital Camera
Connecting a digital camera or camcorder to printer allows you to print recorded images directly without
using a computer. This printer supports both “PictBridge” and Canon “Bubble Jet Direct”.
• PictBridge is an Industry standard enabling a range of digital photo solutions, including the direct
printing of photos from a digital still camera or camcorder* without the need to use a computer.
• Canon “Bubble Jet Direct” allows you to print photos from a Canon “Bubble Jet Direct”
compatible (“PictBridge” incompatible) digital camera or digital camcorder without a computer by
simply connecting the digital camera or digital camcorder to this printer.
* Hereafter, the digital still camera and digital video camcorder are collectively called a digital
camera or camera.
„ Connecting to a Digital Camera
To connect a digital camera to this printer, use the USB cable supplied with the digital camera (for
connection to a computer).
Do not connect any equipment other than the camera ready for “PictBridge” or Canon “Bubble Jet
Direct” to the Direct Print Port of the printer. If you do so, electric shock, fire, or damage to the camera
could result.
• When printing with the digital camera connected to the printer, only the Auto Sheet Feeder can be
used. The Front Sheet Feeder cannot be used.
• When printing photos with the digital camera connected to the printer, it is advisable to use the AC
adapter supplied with the camera. If you use the camera battery, be sure to charge it fully.
• Depending on the model or brand of your camera, you may have to select a mode of printing photos
compliant with “PictBridge” before connecting the camera.
You may also have to turn on the camera or select Play mode manually after connecting the camera
to the printer.
Perform necessary operations according to the instruction manual supplied with your camera.
• When printing from your PC, be sure to unplug the cable connecting the digital camera.
1 Turn on the printer.
2 Load the paper into the Auto Sheet Feeder.
3 Connect the digital camera to the printer.
(1) Make sure the camera is turned off.
21
iP1000_1500_2000_UK.fm Page 22 Thursday, May 6, 2004 3:40 PM
(2) Connect the camera to the printer using the USB cable (for connection to a computer)
supplied with the camera.
Some types of the camera turn on automatically, when connected to the printer. For a camera not
turns on automatically, turn it on manually.
(3) Turn on and set up the camera for direct printing.
When the connection between the camera and printer has been established, the POWER
lamp on the printer flashes once.
* The power-on sequence may differ depending on the model or brand of the camera.
Either of the following icons will display on the LCD display of the digital camera when the printer is
correctly connected.
A PictBridge-compliant digital camera.
A Canon “Bubble Jet Direct” compatible digital camera.
„ Printing Photographs Directly from a PictBridge-compliant
Digital Camera
„ Default Camera Settings
When a PictBridge-compliant camera is connected and printing is started with no printing option
selected, this printer operates based on the following default settings:
- Paper size.............................. 10×15cm / 4"×6"
- Paper type ............................. Photo (Photo Paper Plus Glossy)
- Layout................................... Borderless
- Trimming .............................. Off (No trimming)
- Image optimize ..................... On (Exif Print)
- Date print .............................. Off (No printing)
22
iP1000_1500_2000_UK.fm Page 23 Thursday, May 6, 2004 3:40 PM
About the Settings Explained Below
The settings explained on the following pages cannot be made on some cameras. If any setting cannot be
made, the default setting explained above is used.
Names of settings that are displayed on Canon PictBridge-compliant cameras are used in the description
given below.
Different names may be displayed on your camera depending on the brand or model.
For details, refer to your camera’s instruction manual.
„ About “Paper Size” and “Paper Type”
To change the paper size or paper type, operate the camera to select the PictBridge print setup mode and
confirm or check the settings.
By default, 10×15cm / 4"×6" is selected in “Paper Size” and “Photo” (Photo Paper Plus Glossy) is
selected in “Paper Type” for this printer.
To use Photo Paper Pro, select “Fast Photo” in “Paper type”.
The following sizes and types of paper can be loaded in the printer by selecting options in “Paper Size”
and “Paper Type”.
“Paper Size” setting
“Paper Type” setting
Paper loaded in printer
10×15cm / 4"×6" (Default)
Photo (Default)
Photo Paper Plus Glossy
Photo Paper Plus SemiGloss
Glossy Photo Paper
Fast Photo
Photo Paper Pro
13×18cm / 5"×7"
Photo
Photo Paper Plus Glossy
A4
Photo
Photo Paper Plus Glossy
Photo Paper Plus SemiGloss
Glossy Photo Paper
Fast Photo
Photo Paper Pro
„ About “Layout” and “Trimming”
By default, “Borderless” is selected in “Layout” and “Off (No trimming)” is selected in “Trimming” for
this printer.
„ About “Image optimize”
By default, “On (Exif Print)” is selected for this printer.
„ About “Date print”
By default, “Off” is selected for this printer.
• This printer can handle only Exif/JPEG image data to produce photos using PictBridge.
• Never disconnect the USB cable during printing.
• When disconnecting the USB cable between the digital camera and printer, follow the instructions
given in the instruction manual of the camera.
• Controls of the digital camera cannot be used for the following:
- Print quality setting
- Printer maintenance
23
iP1000_1500_2000_UK.fm Page 24 Thursday, May 6, 2004 3:40 PM
„ Printing Photographs Directly from a
Canon “Bubble Jet Direct” compatible Digital Camera
Let’s take a look at the media types that can be set on the Canon “Bubble Jet Direct” compatible digital
camera connected to this printer and limitations.
„ Media Types for Digital Camera
When you connect a digital camera, you can use the following media:
Digital Camera Setting
Media Type
Card #1
Photo Paper Pro 4"×6" / 101.6×152.4mm
Card #2
Photo Paper Plus Glossy, Photo Paper Plus Semi-Gloss, or Glossy
Photo Paper 4"×6" / 101.6×152.4mm
Card #3
Photo Paper Plus Glossy 5"×7" / 127.0×177.8mm
LTR
Photo Paper Pro, Photo Paper Plus Glossy, Photo Paper Plus SemiGloss, or Glossy Photo Paper Letter
A4
Photo Paper Pro, Photo Paper Plus Glossy, Photo Paper Plus SemiGloss, or Glossy Photo Paper A4
• For the digital camera operation method and troubleshooting, refer to your digital camera’s manual.
For print error messages, refer to “Cannot Print Properly from the Digital Camera” in the User’s
Guide.
• By operating the digital camera, you can make the following prints:
- You can make a standard print from the image displayed in the single display mode or in the
index display mode.
- You can print specified numbers of images, or make an index print by editing the DPOF.
- For the images taken with an Exif Print-compatible digital camera, the Photo Optimizer PRO
function can be used.
- If date printing is set from the digital camera, the date when the photograph was taken is to be
printed (excluding the index print).
- Images will be scaled automatically according to the image size set on the digital camera and the
size of the media set on the printer.
• The digital camera does not support the following functions:
- Print quality setting
- Printer maintenance
• Images other than Exif may not be index printed.
24
iP1000_1500_2000_UK.fm Page 25 Thursday, May 6, 2004 3:40 PM
Notes on Handling the USB Interface (for Windows Users)
If installation of the printer driver does not proceed as instructed in this Quick Start Guide, there may be a
problem with the USB driver installation.
Try reinstalling the printer driver.
„ Reinstalling
If you cannot proceed beyond the Printer Connection
screen;
1 Click Cancel on the Printer Connection
screen.
2 Click Start Over on the Installation Failure
screen.
3 Click Back on the Easy Install screen.
4 Click Exit on the Welcome screen, then
remove the CD-ROM.
5 Turn the printer off.
6 Restart the computer.
7 Reinstall the printer driver (see page 9).
For Further Details...
For more information, refer to the User’s Guide. The User’s Guide is an HTML manual you can browse
through on your computer.
„ User’s Guide Contents
The User’s Guide is HTML manual you can browse through on your computer.
• Printer parts and their function
• Further printing techniques
• Routine maintenance
• Printing media
• Troubleshooting
• Specifications
„ How to View the User’s Guide
For Windows
Double-click the User’s Guide short-cut icon on
the desk top, or click Start and select All
Programs (or Programs), Canon PIXMA
iP2000 and User’s Guide.
For Mac OS X
(1) Load the CD-ROM in your computer.
(2) Double-click the Manual folder.
(3) Double-click the User's Guide folder.
(4) Select a language folder.
(5) Double-click the icon for the
iP2000_UG_ENG.htm file.
25
iP1000_1500_2000_UK.fm Page 26 Thursday, May 6, 2004 3:40 PM
„ Applications Included in the CD-ROM Package
Easy-WebPrint (Windows)
You can easily print out homepages displayed on Internet Explorer in full size without its right-hand
side being cropped. This application is automatically added to the Internet Explorer toolbar. Internet
Explorer 5.5 or later must be installed.
Easy-PhotoPrint (Windows/Macintosh)
You can make a Borderless Print easily and quickly, just by selecting a photograph taken with a digital
camera and the paper type on which to print. Also it has tools to correct red eye caused by the camera’s
flash or smooth and beautify the facial skin. It is compatible with Exif Print.
PhotoRecord (Windows)
You can create fun and unique photo albums with a click of your mouse. It is compatible with Exif Print.
For more information on the applications, refer to the Photo Application Guide.
„ BJ Printer Driver Systems Requirements
For Windows
• Use a computer equipped on which Windows XP, Windows 2000, Windows Me, or Windows 98
can operate.
• USB* interface
• CD-ROM drive
• Available hard-disk space for printer driver installation (including temporary files)
Windows XP/Windows 2000: 50MB
Windows Me/Windows 98:
15MB
* USB operation can only be guaranteed on a PC with pre-installed Windows XP, Windows 2000,
Windows Me, or Windows 98.
For Macintosh
• Use a Macintosh series computer equipped with USB interface on which Mac OS X v.10.2.1 or
later or Mac OS 9.x can operate.
• USB interface
• CD-ROM drive
• Available hard-disk space for printer driver installation
Mac OS X v.10.2.1 or later: 100 MB
Mac OS 9.x:
30 MB
• The following functions are not supported when using Mac OS X v.10.2.1 or later:
- Duplex Printing
- Poster Printing
- Fit to Page Printing
- Booklet Printing
- Reverse Order Printing (except for Mac OS X v.10.3.x)
- Photo Optimizer Pro
Additional Systems Requirements for Electric Manual
• 15 MB free hard disk space
• Windows: Microsoft® Internet Explorer 5.0 or later.
• Mac OS: Microsoft® Internet Explorer 5.0 or later, Safari 1.0 or later.
26
iP1000_1500_2000_UK.fm Page 27 Thursday, May 6, 2004 3:40 PM
27
iP1000_1500_2000_UK.fm Page 28 Thursday, May 6, 2004 3:40 PM
28
Regulatory Information
Exif Print
This printer supports Exif Print.
Exif Print is a standard for enhancing the communication between digital cameras and printers. By
connecting to an Exif Print-compliant digital camera, the camera’s image data at the time of shooting is
used and optimized, yielding extremely high quality prints.
Canadian Radio Interference Regulations
This digital apparatus does not exceed the Class B limits for radio noise emissions from a digital
apparatus as set out in the interference-causing equipment standard entitled “Digital Apparatus,”
ICES-003 of the Industry Canada.
Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils
numériques de Classe B prescrites dans la norme sur le matériel brouilleur NMB-003 d'Industrie
Canada intitulée « Appareils numériques ».
International ENERGY STAR® Program
As an ENERGY STAR® Partner, Canon Inc. has determined that this product meets the ENERGY
STAR guidelines for efficiency.
The International ENERGY STAR® Office Equipment Program is a global program
that promotes energy saving through the use of computer and other office equipment.
The program backs the development and dissemination of products with functions
that effectively reduce energy consumption. It is an open system in which business
can participate voluntarily. The targeted products are office equipment such as computers, monitors, printers, faxes and copiers.
Their standards and logos are uniform among participating nations.
Power Requirements
Never use a power supply voltage other than that supplied in the country of purchase. Using the incorrect voltage could cause a fire or electric shock. The correct power supply voltages and frequencies are
as follows:
AC 110-120 V, 50/60 Hz
AC 220-240 V, 50/60 Hz
For 220-240V, 50/60Hz model
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
Do not make any changes or modifications to the equipment unless otherwise specified in the
manual. If such changes or modifications should be made, you could be required to stop operation
of the equipment.
For 110-120V, 50/60Hz model
Color Printer Model: K10239
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
„
„
„
„
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Use of a shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC
Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the
manual. If such changes or modifications should be made, you could be required to stop operation
of the equipment.
Canon U.S.A., Inc.
One Canon Plaza
Lake Success, NY 11042
1-516-328-5600
Printer Model: K10239
Quick Start Guide
Table of Contents
Preface
1
Shipping Materials
1
Introduction
1
Setting Up
Preparing the Printer
3
Installing the Print Head
4
Loading Paper
7
Installing the Printer Driver
9
Printing with Windows
QA7-3266-V01
©CANON INC.2004
PRINTED IN THAILAND
2
Connecting the Printer to the Computer
Basic Operations
The following ink tanks are compatible with this printer.
For details on ink tank replacement, refer to “Print Head Maintenance” in this guide.
2
14
14
Printing with Macintosh
17
Print Head Maintenance
19
Appendix
21
Printing Photographs Directly from a Digital Camera
21
Notes on Handling the USB Interface (for Windows Users)
25
For Further Details...
25
BE
QA7-3266-V01