Canon L390 Fax Machine User Manual

Please read this guide before operating this equipment.
After you finish reading this guide, store it in a safe place
for future reference.
FAX-L380S/L390 User’s Guide
About the Manuals for the Machine
The manuals for this machine are divided as follows. Please refer to them for detailed information.
The manuals supplied with optional equipment are included in the list below.
Guides with this symbol are book manuals.
CD-ROM
• Setting up the Machine
• Installing CARPS
• Feature Overviews
• Maintenance and Troubleshooting
• Setting up the Machine
• Document and Paper Handling
• Sending and Receiving Faxes
• Speed Dialling
• Making Copies
• Maintenance
• Troubleshooting
• The Menu System
• Installing CARPS Software
• Printer Properties
• Troubleshooting Printer Driver Issues
Guides with this symbol are PDF manuals included on the
accompanying CD-ROM.
Starter Guide
User’s Guide
(This Document)
CD-ROM
Software Guide
CD-ROM
• To view the manual in PDF format, Adobe Reader/Adobe Acrobat Reader is required. If Adobe Reader/Adobe Acrobat Reader is not installed on your
system, please download it from the Adobe Systems Incorporated website.
• Considerable effort has been made to make sure that the manuals for the machine are free of inaccuracies and omissions. However, as we are
constantly improving our products if you need an exact specification, please contact Canon.
IMPORTANT!
Appendix C describes important information
exclusively for specified countries. If you find your
country name in Appendix C, be sure to read it.
Model Name
H12425 (FAX-L380S)
H12425 (FAX-L390)
Copyright
Copyright © 2005 by Canon Inc. All rights reserved. No part of this
publication may be reproduced, transmitted, transcribed, stored in a retrieval
system, or translated into any language or computer language in any form or
by any means, electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise, without the prior written permission of Canon Inc.
ii
Trademarks
Canon® is a registered trademark, and UHQ™ is a trademark of Canon Inc.
IBM® is a registered trademark.
Microsoft® and Windows® are registered trademarks of Microsoft
Corporation.
Other brand and product names may be trademarks or registered trademarks
of their respective companies.
As an ENERGY STAR® Partner, Canon has determined
that this product meets the ENERGY STAR® guidelines
for energy efficiency. The International ENERGY
STAR® Office Equipment Program is an international
program that promotes energy saving through the use
of computers and other office equipment. The program
backs the development and dissemination of products
with functions that effectively reduce energy
consumption. It is an open system in which business
proprietors can participate voluntarily. The targeted
products are office equipment such as computers,
displays, printers, facsimiles, and copiers. Their
standards and logos are uniform among participating
nations.
Super G3 is a phrase used to describe the new
generation of fax machines that use ITU-T V.34 standard
33.6Kbps* modems. Super G3 High Speed Fax machines
allow transmission time of approx. 3 seconds* per page
which results in reduced telephone line charges.
* Approx. 3 seconds per page fax data transmission time based on Canon FAX
Standard Chart No.1, (Standard Mode) at 33.6Kbps modem speed. The Public
Switched Telephone Network (PSTN) currently supports 28.8Kbps modem speeds or
lower, depending on telephone line conditions.
iii
Safety Information
Laser Safety Information
Laser radiation could be hazardous to the human body.
For this reason, laser radiation emitted inside this product
is hermetically sealed within the protective housing and
external cover. No radiation can leak from the product in
the normal operation of the product by the user.
This product is classified as a Class 1 Laser Product
under IEC 60825-1: 1993 and EN 60825-1: 1994.
200V-240V model
The label shown below is attached to the laser scan
machine on the product.
This product has been classified under IEC 60825-1: 1993
and EN60825-1: 1994, and conforms to the following classes:
CLASS 1 LASER PRODUCT
LASER KLASSE 1
APPAREIL A RAYONNEMENT LASER DE
CLASSE 1
APPARECCHIO LASER DI CLASSE 1
PRODUCTO LASER DE CLASE 1
APARELHO A LASER DE CLASSE 1
Caution
iv
PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED IN THIS GUIDE MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
Contents
Chapter 1
Introducing FAX-L380S/L390
Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
The Main Features of the Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Plain Paper Fax Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Printer Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
Copier Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
Telephone Features*. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
Using the Machine With the Printer Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
Using Your Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
Type Conventions Used in This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
Illustrations Used in This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6
Customer Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7
Chapter 2
Setting Up Your Machine
Choosing a Location for Your Machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Unpacking Your Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Do You Have Everything?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Removing Shipping Materials. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Replaceable Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
Assembling the Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
Attaching Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
Document Output Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
Output Tray. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
Installing the Paper Cassette* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6
Making Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7
Connecting the Machine to Your PC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7
Connecting the Telephone Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8
Connecting the Power Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8
Setting the Display Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10
Getting Acquainted With Your Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11
Front View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11
Rear View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13
The Operation Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14
Special Function Buttons (One-Touch Speed Dial Panel Open) . . . . . . . . . . . . . . . . . . . . . . . . . 2-15
Energy Saver Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16
Setting the Energy Saver Mode Manually . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16
Restoring from the Energy Saver Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16
The Toner Cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-17
Handling and Storing Cartridges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-17
Installing/Replacing the Toner Cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18
Loading Recording Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-21
Loading Paper in the Cassette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-22
Testing the Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-23
v
Chapter 3
Registering Information in the Machine
Guidelines for Entering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Entering Numbers, Letters, and Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Personalizing Your Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Identifying Your Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Entering the Date and Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Registering Your Fax Number and Name. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the Telephone Line Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the Summer Time* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 4
3-1
3-1
3-3
3-3
3-3
3-4
3-5
3-5
Paper Handling
Print Media Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
Printing Areas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Loading Paper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
Loading Paper in the Cassette. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
Loading Envelopes in the Cassette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Loading Paper in the Multi-Purpose Feeder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8
Loading an Envelope in the Multi-Purpose Feeder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9
Orientation of the Document and the Paper Loading. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11
Selecting the Paper Output Area. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12
Paper Type and Paper Output Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12
Face Down Paper Output Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13
Face Up Paper Output Area. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13
Chapter 5
Speed Dialing
Speed Dialing Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
One-Touch Speed Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Storing Numbers for One-Touch Speed Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Changing or Deleting a Number/Name Stored Under a One-Touch Speed Dial Button . . . . . . . . 5-3
Using One-Touch Speed Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4
Coded Speed Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5
Storing Numbers for Coded Speed Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5
Changing or Deleting a Number/Name Stored under a Coded Speed Dialing Code. . . . . . . . . . . 5-6
Using Coded Speed Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7
Group Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9
Creating Groups for Group Dialing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9
Changing or Deleting a Number/Name Stored under a Group Dialing . . . . . . . . . . . . . . . . . . . . 5-10
Using Group Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-12
Directory Dialing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-13
Chapter 6
Sending Faxes
Preparing to Send a Fax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Document Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Scanning Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Loading Documents in the ADF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting the Resolution and Contrast. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting the Image Quality (Resolution) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting the Exposure (Density) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sending Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Memory Sending . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Manual Sending Via the Handset*. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dialing Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sending Documents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Memory Sending . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Manual Sending Via the Handset* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
vi
6-1
6-1
6-2
6-3
6-4
6-4
6-5
6-6
6-6
6-6
6-7
6-8
6-8
6-9
Canceling Sending . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-10
Canceling Memory Sending . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-10
While Documents Are Being Scanned Using the ADF . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-10
After All Documents Are Scanned . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-10
Redialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-11
Manual Redialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-11
Automatic Redialing With Memory Sending . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-11
Canceling Automatic Redialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-11
Setting Up Automatic Redialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-11
Sequential Broadcasting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-13
Sending a Document to More Than One Destination. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-13
Sending a Document Using Group Dialing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-14
Delayed Sending . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-15
Chapter 7
Receiving Faxes
Different Ways to Receive a Fax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1
Setting the Receive Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2
Receiving Faxes and Phone Calls Automatically:
FaxTel Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2
Setting the Options for FaxTel Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2
What Happens When FaxTel Mode is Selected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3
Receiving Faxes Manually: Manual Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4
Receiving Faxes Automatically: FaxOnly Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5
Using an Answering Machine: AnsMode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5
Using the Machine With an Answering Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5
Receiving Faxes in Memory When a Problem Occurs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6
Receiving While Performing Other Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-7
Canceling an Incoming Fax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-7
Chapter 8
Setting Up and Using Polling
What’s Polling? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1
Before You Use Polling Receiving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1
Polling Other Fax Machines to Receive Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2
Requesting Another Fax to Send a Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2
Setting Up Polling Sending . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3
Setting Up a Polling Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3
Scanning a Document into the Memory for Polling Sending . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-4
Changing the Polling Box Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-5
Deleting a Polling Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-6
Chapter 9
Special Features
Special Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1
Dialing Through a Switchboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1
Registering the Access Type and Outside Line Access Number Under the R button . . . . . . 9-1
Dialing Long Distance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2
How to Enter Pauses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2
Using Tone Dialing On a Pulse Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-3
Restricting Use of the Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-4
Enabling Restriction of Your Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-4
Canceling Restriction of Your Machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-5
Using Memory Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-6
Turning Memory Lock ON and Setting the Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-6
Turning Memory Lock OFF and Printing Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-7
vii
Chapter 10
Making Copies
Making Copies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Specifying the Paper Size and Type (Common for Cassette and Multi-Purpose Feeder) . . . . . .
Specifying the Paper Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Specifying the Paper Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting Enlarging/Reducing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Enlarging/Reducing Using Preset Copy Ratios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Enlarging/Reducing Using Custom Copy Ratios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Improving Copied Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting the Image Quality (Resolution). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting the Exposure (Density). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting Automatically . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting Manually . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10-1
10-2
10-2
10-3
10-4
10-4
10-5
10-6
10-6
10-6
10-6
10-7
Special Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-8
Collate Copy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-8
Reserve Copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-9
Confirming the Copy Job You Reserved . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-10
Deleting the Copy Job You Reserved . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-10
Chapter 11
System Monitor
Checking the Status of Copy, Fax, Print and Report Jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Confirming Transmission Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Confirming Transmission Results and Sending Reservation . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Deleting a Fax Job . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Confirming and Deleting a Copy Job . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Confirming and Deleting a Print Job . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Confirming and Deleting a Report Job. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 12
11-1
11-1
11-2
11-2
11-3
11-3
11-4
Reports and Lists
Activity Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1
Transmission (TX) Reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-2
Error TX Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-2
TX Report. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-3
Multi TX/RX Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-3
Reception (RX) Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-4
Memory Clear Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-5
Speed Dialing Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-6
One-Touch Speed Dial List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-7
Coded Speed Dial List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-8
Group Dial List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-9
User’s Data List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-10
Document Memory List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-11
Cancel Report Printing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-12
viii
Chapter 13
Troubleshooting
Clearing Jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-1
Removing Jammed Paper from Inside the Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-1
Removing Jammed Paper from the ADF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-7
LCD Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-8
Error Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-11
Paper Feeding Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-12
Faxing Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-15
Sending Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-15
Receiving Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-17
Telephone Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-20
Copying Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-21
Print Quality Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-22
Printing Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-24
If You Cannot Solve the Problem. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-25
Chapter 14
Maintaining Your Machine
Cleaning the Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-1
Cleaning the Machine’s Exterior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-2
Cleaning the ADF Area. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-2
Transporting the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-5
Chapter 15
The Menu System
Accessing the Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-1
Menu Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-2
1. PAPER SETTINGS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-2
2. COMMON SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-3
3. COPY SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-5
4. FAX SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-6
5. ADD. REGISTRATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-14
6. PRINTER SETTINGS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-14
7. TIMER SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-15
8. PRINT LISTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-16
Appendix A
Specifications
General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-1
Plain Paper Fax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-2
Copier. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-4
Telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-4
Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-5
Printable Area: Papers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6
Printable Area: Envelopes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-7
Document Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-8
Printer Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-9
Appendix B
Attaching the Optional Handset to the Machine
Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-1
Attaching the Handset to Your Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2
Adjusting the Ringer Volume Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-4
Maintaining Your Handset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-4
ix
Appendix C
Country-Specific Features
Australia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1
Telstra FaxStream™ Duet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1
Setting the FAX-L380S/L390 for Network Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1
Network Switch System Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-2
New Zealand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-3
Telecom FaxAbility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-3
Setting the FAX-L380S/L390 for Network Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-3
Network Switch System Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-3
Glossary
Index
x
Introducing FAX-L380S/L390
1
CHAPTER
This chapter introduces you to the main features of the machine. It also explains how to get the most out of the
documentation that comes with the machine, and gives important safety instructions.
Welcome
Thank you for purchasing the new Canon FAX-L380S/L390 models. We are sure that your machine will
meet your printing and copying needs easily and conveniently, as well as your fax and phone
requirements.
FAX-L380S
FAX-L390
Welcome
1-1
The Main Features of the Machine
The machine is a multifunction system for your home or small office, and combines a plain paper fax
machine, a printer, a copier, and a telephone* into a single, convenient desktop machine.
1
Introducing FAX-L380S/L390
The machine’s multitasking ability enables you to perform multiple operations simultaneously. For
example, you can print a document or make copies at the same time you are sending a fax.
The compact size of the machine makes it ideal for desktop use, and allows you to use it in places
where other machines may not fit.
Plain Paper Fax Features
■ UHQ™ Image Processing System
The machine uses Canon’s Ultra High Quality Image Processing System to provide enhanced definition in faxed
photos.
■ Error Correction Mode (ECM)
The machine’s Error Correction Mode (ECM) reduces transmission errors while communicating with another
ECM-capable machine.
■ Automatic switching between fax and voice calls*
The machine can automatically distinguish between fax and voice calls, so that you can receive both through a
single phone line.
■ Answering machine connection
You can connect an answering machine to receive telephone messages while you are away.
■ Transmission speed
The machine uses G3 data encoding methods that increase transmission speed to approx. 3 seconds** per page.
■ Memory sending/receiving
The machine can store up to 510** fax pages of A4-size in its memory, and can receive faxes while printing.
■ Reduced-size printing
The machine automatically scales received faxes to fit the size of the paper loaded in the machine.
■ Automatic dialing and broadcasting
For easier faxing, the machine provides One-Touch Speed Dialing, Coded Speed Dialing, and Group Dialing
methods for automatic dialing. It also allows you to broadcast or send a fax at a preset time to as many as 142
locations (210 locations for the FAX-L390 model).
*
With optional handset or other telephone connected. This feature is available for certain countries only.
** Based on Canon FAX Standard Chart No.1, standard mode.
1-2
The Main Features of the Machine
Printer Features
■ Excellent print quality
The machine offers 1200 dpi enhanced × 600 dpi laser beam printing, providing you with high resolution text and
graphics.
■ Simple maintenance
■ Economy toner-saving printing
The machine includes an economy printing mode which allows you to reduce toner consumption by approx. 30%.
Copier Features
■ Up to 99 copies
The machine can make up to 99 copies of a document at a time, at a rate of up to 18 copies per minute.
■ Resolution
The machine scans documents at 300 × 300 dpi. Printing resolution is 1200 dpi enhanced × 600 dpi.
■ Copy enlargement/reduction
The machine can reduce or enlarge copies in the range between 50% and 200% of their original size.
■ Collate copy
The machine can sort copies in page order. It is convenient when you make multiple copies of a multiple page
document.
Telephone Features*
■ Automatic dialing
The machine’s three automatic dialing methods (One-Touch Speed Dialing, Coded Speed Dialing, and Group
Dialing) can be used to store phone and fax numbers for easy and efficient calling.
■ Connection for the optional handset, an answering machine, or a telephone
Connecting the optional handset or a telephone to the machine allows you to use it to make and receive normal
telephone calls. In addition, connecting an answering machine allows you to receive faxes and phone messages
while you are away from your desk.
*
This feature is available for certain countries only.
The Main Features of the Machine
1-3
Introducing FAX-L380S/L390
1
The Cartridge W Starter and the regular Cartridge W for the machine contain both the toner and drum, making
installation and replacement simple.
Using the Machine With the Printer Driver
The printer driver that is included with your machine allows you to use the machine’s printing function
directly from your PC.
1
Introducing FAX-L380S/L390
• Use the machine as the default printer for Windows applications
For more information on using the printer driver with your machine, refer to the Software Guide also
stored on the CD-ROM.
System Requirements
The printer driver for Windows 98/Me/2000/XP can be used in the following system environments.
■ Operating System
Windows 98, Windows Me, Windows 2000, or Windows XP (x86 architecture).
■ Computer
Any computer on which Windows 98, Windows Me, Windows 2000, or Windows XP runs properly.
■ Hardware Environment
Using the CARPS software requires following computer environment:
• IBM or IBM-compatible PC
• CD-ROM drive or network environment with the access to the CD-ROM
• PC equipped with a USB port and the USB class driver installed
OS
CPU
®
Windows 98
Intel Pentium
Windows Me
Intel Pentium
®
RAM
Available free disk space
90 MHz or greater
32 MB or greater**
115 MB or greater****
150 MHz or greater
32 MB or greater**
115 MB or greater****
64 MB or greater***
500 MB or greater
64 MB or greater***
500 MB or greater
®
Windows 2000*
Professional
Intel Pentium 133 MHz or greater,
or compatible micro processors (up
to 2 processors are supported)
Windows XP*
Pentium Family
300 MHz or greater
®
* Logon as a user account with Administrators’ rights is recommended.
**64 MB or greater is recommended.
***128 MB or greater is recommended.
****200 MB or greater is recommended.
1-4
Using the Machine With the Printer Driver
Using Your Documentation
Your machine includes the following documentation to help you learn how to use your machine:
This Guide provides basic information on how to set up and use the machine.
• User’s Guide (this Guide)
This Guide provides detailed information on how to use and troubleshoot your machine.
• Software Guide
This Guide (stored in the CD-ROM) describes how to use the machine to print from your PC.
Type Conventions Used in This Guide
This Guide follows the conventions below to emphasize certain information that will help you use your
machine correctly and safely:
CAUTION
Cautions tell you how to avoid actions that could injure you or damage your machine.
NOTE
Notes provide advice for using your machine more effectively, describe operating restrictions, and tell how to avoid
minor operating difficulties.
In addition, this Guide uses brackets to show button and switch names on the machine, such as [Start],
and [OK]. Text that appears in the machine’s display is shown in capital letters, such as: <RECEPTION
OK>.
Illustrations Used in This Guide
Unless otherwise mentioned, illustrations used in this guide are those taken when no optional
equipment is attached to FAX-L380S.
When there is any difference between FAX-L380S and FAX-L390, it is clearly indicated in the text, e.g.,
“Only for the FAX-L380S model.”
Using Your Documentation
1-5
Introducing FAX-L380S/L390
1
• Starter Guide
Safety Instructions
Read these safety instructions thoroughly before using your machine, and keep them handy in case
you need to refer to them later.
1
Introducing FAX-L380S/L390
CAUTION
Except as specifically described in this User’s Guide, do not attempt to service the machine yourself.
Never attempt to disassemble the machine: opening and removing its interior covers will expose you
to dangerous voltages and other risks. For all service, contact your local authorized Canon dealer or
the Canon help line.
• Always follow all warnings and instructions marked on the machine.
• Use the machine only on a sturdy, stable, level surface. If the machine falls, it could be seriously
damaged.
• Do not use the machine near water. If you spill liquid on or into the machine, unplug it immediately
and call your local authorized Canon dealer or the Canon help line.
• The back of the machine includes slots and openings for ventilation. To keep the machine from
overheating (which can cause it to operate abnormally and create a fire risk), take care not to block
or cover these openings. Do not operate the machine on a bed, sofa, rug, or other similar soft
surface, or near a radiator or other heat source. Do not place the machine in a closet or cabinet or on
shelves unless adequate ventilation is available. See “Choosing a Location for Your Machine,” on
p. 2-1 for guidelines on how much space the machine needs for ventilation.
• Operate the machine only from the type of power source indicated on the machine’s label. If you are
unsure of the type of power available from your wall outlets, contact your local power company.
• Make sure the total amperage used by all devices plugged into the wall outlet does not exceed the
ampere rating of the outlet’s circuit breaker.
• Do not allow anything to rest on the power cord and do not place the machine where the cord will be
walked on. Make sure the cord is not knotted or kinked.
• Do not insert object of any kind into the slots or openings on the machine’s cabinet, as they could
touch dangerous voltage points or short out parts, and result in fire or electric shock.
• Do not allow small objects (such as pins, paper clips, or staples) to fall into the machine. If something
does fall into it, unplug the machine immediately and call your local authorized Canon dealer or the
Canon help line.
• Do not plug the power cord into an uninterruptible power supply (UPS).
• Always unplug the machine before moving or cleaning it.
• Whenever you unplug the machine, wait at least 5 seconds before you plug it back in.
• Keep the machine away from direct sunlight, as this can damage it. If you have to place it near a
window, install heavy curtains or blinds.
• Do not expose the machine to extreme temperature fluctuations. Install the machine in a place with
temperatures between 10° and 32.5°C.
• Always unplug the machine during thunderstorms.
• Before you transport the machine, remove the toner cartridge.
1-6
Safety Instructions
• Always lift the machine as shown below. Never lift it by its paper cassette or other supports.
CAUTION
Unplug the machine and contact your local authorized Canon dealer or the Canon help line in any of
these situations:
- If the power cord or plug is damaged or frayed.
- If liquid spills into the machine, or if it is otherwise exposed to rain or liquids.
- If you notice smoke, unusual noises or odor coming from it.
- If the machine does not operate normally when you follow the operating instructions. Adjust only
those controls that are covered by the operating instructions in this User’s Guide, or you can
damage the machine and require extensive repair work.
- If the machine is dropped or its cabinet damaged.
- If the machine begins performing poorly, and you cannot correct the problem by following the
procedures in Chapter 13, “Troubleshooting.”
- This product emits low level electromagnetic waves. If you use a cardiac pacemaker and feel
abnormalities, please move away from this product and consult your doctor.
Customer Support
Your machine is designed with the latest technology to provide trouble-free operation. If you encounter
a problem with the machine’s operation, try to solve it by using the information in Chapter 13.
If you cannot solve the problem or if you think your machine needs servicing, contact your local
authorized Canon dealer or the Canon help line.
Safety Instructions
1-7
Introducing FAX-L380S/L390
1
Setting Up Your Machine
2
CHAPTER
This chapter tells you how to unpack, assemble, and connect your machine, install the toner cartridge, and load paper
— everything you need to know to get your machine ready to use.
Choosing a Location for Your Machine
Before unpacking your machine, follow these guidelines to choose an appropriate location for the
machine.
CAUTION
Please review the information provided in “Safety Instructions,” on p. 1-6, to make sure you are
installing your machine for safe use.
• Put the machine in a cool, dry, clean, well ventilated place:
- Make sure the area is free from dust.
- Make sure the location is not affected by extreme temperature fluctuations, and remains between
10° and 32.5°C.
- Make sure the area’s relative humidity is always between 20% and 80%.
• Keep the machine away from direct sunlight.
• If possible, place the machine near an existing telephone outlet, to allow for an easy connection of
the telephone line to the machine.
• Place the machine near an electrical wall outlet that provides 200 to 240-volt AC (50 to 60 Hz) power.
• Place the machine near the PC you will be connecting it to. Make sure you can reach it easily, as you
will be using the machine as a printer, fax machine, copier, and telephone.
• Do not plug the machine into the same circuit as an appliance such as an air conditioner, electric
typewriter, television, or copier. Such devices generate electrical noise that can interfere with your
machine’s ability to send or receive faxes.
• Set the machine on a flat, stable, vibration-free surface that is strong enough to support its weight
(about 11 kg (12.1 kg for the FAX-L390 model)).
Choosing a Location for Your Machine
2-1
Unpacking Your Machine
Follow the directions below to unpack your machine properly, and to make sure you have all of its
components and documentation.
2
Setting Up Your Machine
Do You Have Everything?
As you unpack the machine, save the carton and packing material in case you want to move or ship the
machine in the future.
Carefully remove all items from the box. You should have someone help by holding the box while you
lift the machine and its protective packaging out of the carton.
Make sure you have the following items:
FAX-L380S
FAX-L390
MAIN UNIT
CARTRIDGE W STARTER
DOCUMENT OUTPUT TRAY
CASSETTE EXTENSION*
OUTPUT TRAY
EXTENSION COVER*
POWER CORD
TELEPHONE LINE CORD
USB CABLE*
DOCUMENTATION
DESTINATION LABELS
CD-ROM
ONE-TOUCH SHEET
If any of the above items are damaged or missing, notify your local authorized Canon dealer
immediately.
*Only for the FAX-L380S model.
2-2
Unpacking Your Machine
NOTE
• The actual items may differ in shape and quantity from the ones shown on p. 2-2.
• Note that the items included with your machine may vary depending on the country of purchase.
• Important! Save your sales receipt for proof of purchase in case your machine requires warranty service.
• If you have purchased the optional handset, see Appendix B for the items included.
• In addition to the items shipped with your machine, if you wish to use the machine as a printer, you will need a
USB cable, which comes with the machine*. For best results, use a cable that is no more than 5 meters long.
*Only for the FAX-L380S model.
Removing Shipping Materials
In order to protect your machine during shipping, the machine has been packed with protective
material that you must remove before using. Follow these steps:
NOTE
The actual shipping materials may differ in shape, quantity, and position from the ones shown in the illustrations
below.
1
Remove all pieces of shipping tape from the exterior of the machine.
2
Open the document feeder tray.
3
Open the operation panel by grasping it at the center and gently pulling it up.
Remove protective sheet from the Automatic Document Feeder (ADF), then gently close the operation
panel by pressing it down until it clicks.
Unpacking Your Machine
2-3
Setting Up Your Machine
2
Replaceable Parts
The only component of the machine that needs regular service or replacement is the Cartridge W.
The Cartridge W Starter comes with your machine but you should purchase the regular Cartridge W for
replacement.
Although Canon manufactures many types of toner cartridges, the Cartridge W is the only one
designed to be used with your machine. The Cartridge W can be purchased at any Canon authorized
dealer.
Setting Up Your Machine
2
2-4
Unpacking Your Machine
Assembling the Machine
Use the following instructions to assemble the main unit and its components. To see how the machine
will look fully assembled, see “Getting Acquainted With Your Machine,” on p. 2-11.
2
Setting Up Your Machine
Attaching Components
NOTE
Make sure the tabs are inserted into the slot completely.
Document Output Tray
Insert the tabs into the slots on the back of the machine.
Output Tray
Insert the tray into the corresponding slots.
Assembling the Machine
2-5
Installing the Paper Cassette*
1
Pull out the paper cassette.
2
Attach the cassette extension to the cassette.
3
Attach the extension cover on the back of the machine.
4
Insert the paper cassette into the machine.
Setting Up Your Machine
2
*Installing the paper cassette is necessary for the FAX-L380S model only.
2-6
Assembling the Machine
Making Connections
NOTE
• Be sure to connect any external device before using your machine.
• Canon cannot guarantee that all answering machines will be compatible with your machine, due to varying
2
specifications.
7, “Receiving Faxes.”)
• To connect an extension phone as well as an answering machine, connect the extension phone to the answering
machine, and then the answering machine to your machine.
• If you connect a data modem to your machine and you use it extensively, or others access your PC frequently
through the data modem, you may want a dedicated telephone line for your data modem.
Connecting the Machine to Your PC
Your machine has a USB port that allows you to connect it to a PC. Use the USB cable which comes
with this machine*.
*Only for the FAX-L380S model.
NOTE
For the best results, use a cable that is 5 meters in length or shorter.
Connect the machine to your computer as follows:
1
2
Make sure the computer is turned off and the machine is unplugged.
Connect the USB cable to your machine and PC during software installation to ensure the proper
operation of the printer driver. (See the Software Guide.)
Making Connections
2-7
Setting Up Your Machine
• If you have connected an external device to your machine, be sure to set the correct receive mode. (See Chapter
Connecting the Telephone Line
Connect the telephone line to the jack on the left side of the machine:
Connect the optional handset to
.
Connect an extension phone or answering
machine to
.
2
Connect the supplied telephone line to
.
Setting Up Your Machine
Connect the other end of line to a wall telephone jack.
If you connect an answering machine to the machine, be sure to read your answering machine’s
manual.
NOTE
You can also connect the extension phone to the jack marked
handset.
if you have not connected the optional
Connecting the Power Cord
CAUTION
Follow these guidelines when connecting your machine to a power source:
- The machine is intended for domestic use only and requires 200-240 V AC. Do not use it outside the
country where it was purchased.
- Use only the power cord that came with the machine. Using a longer cord or extension cord can
cause the machine to malfunction.
- Unplug the machine only by pulling on the plug itself. Never pull on the cord.
- Do not plug the machine into an outlet shared with an appliance such as an air conditioner,
computer, electric typewriter, or copier. These devices generate electrical noise, which can interfere
with the operation of the machine.
- Make sure nothing is laying on the power cord, and that the cord cannot be walked on or tripped
over.
- Do not overload the electrical outlet. Make sure the total amperage used by all the machines plugged
into the outlet does not exceed the ampere rating of the outlet’s circuit breaker.
- Do not plug the machine into an uninterruptible power supply (UPS).
2-8
Making Connections
Connect the power cord as follows:
1
Plug the supplied power cord into the power connector on the back of the machine.
2
Setting Up Your Machine
2
Plug the other end of the power cord into the outlet.
NOTE
The machine has no power switch, so its power is on as long as it is plugged in. Once connected, though, the
machine still needs to warm up before you can use it.
While the machine is warming up, the message <PLEASE WAIT> appears in the LCD display:
PLEASE WAIT
When you connect the power cord to an AC outlet for the first time after purchase, <DISPLAY LANGUAGE> will
appear in the LCD display after <PLEASE WAIT>. In this case, set the language for the LCD display. (See
“Setting the Display Language,” on p. 2-10.)
The Fax standby mode appears:
31/12 2005 SAT 15:11
FaxOnly
STANDARD
NOTE
If the toner cartridge has not been installed yet, the message <INSTALL CARTRIDGE> appears in the LCD
display, and the Alarm indicator flashes. In this case, install the toner cartridge. (See “Installing/Replacing the
Toner Cartridge,” on p. 2-18.)
Making Connections
2-9
Setting the Display Language
When you connect the power cord to an AC outlet for the first time, you need to select the language for
the LCD display.
Follow the step to set the display language.
2
Setting Up Your Machine
After connecting the power cord, the display changes from <PLEASE WAIT> to the <DISPLAY
LANGUAGE> menu.
1
Use [
(-)] or [
(+)] to select the preferred language for the LCD display ➞ press [OK].
DISPLAY LANGUAGE
<
ENGLISH
31/12 2005 SAT 15:11
> ➞ FaxOnly
STANDARD
Setting is completed and the machine enters the Fax standby mode.
Once you have selected the language, this setting menu will not appear next time you connect the power cord.
2-10
Setting the Display Language
Getting Acquainted With Your Machine
Before using your machine, look over the diagrams on these pages to become familiar with the
machine’s components.
2
Setting Up Your Machine
Front View
FAX-L380S
a Document feeder tray
Place documents.
b ADF (Automatic Document Feeder)
Holds documents and feeds them automatically into the scanning
machine.
c Document output tray
Documents come out here.
d Slide guides
Adjust to the width of documents.
f Output tray
Outputs printouts.
g Printer cover
Open it when you install the cartridge, or remove jammed
paper.
h Multi-purpose feeder
Used when printing paper one by one manually.
i Cassette
Holds the paper supply.
e Operation panel
Controls the machine.
Getting Acquainted With Your Machine
2-11
FAX-L390
Setting Up Your Machine
2
a Document feeder tray
Place documents.
b ADF (Automatic Document Feeder)
Holds documents and feeds them automatically into the scanning
machine.
c Document output tray
Documents come out here.
d Slide guides
Adjust to the width of documents.
e Operation panel
Controls the machine.
2-12
Getting Acquainted With Your Machine
f Output tray
Outputs printouts.
g Printer cover
Open it when you install the cartridge, or remove jammed
paper.
h Multi-purpose feeder
Used when printing paper one by one manually.
i Cassette
Holds the paper supply.
Rear View
FAX-L380S
Setting Up Your Machine
2
FAX-L390
a USB port
Connect the USB (Universal Serial Bus) cable.
b Handset jack
Connect the handset (optional).
c Extension phone jack
Connect an extension phone.
e Rear cover
Open it when you output paper face up, or remove jammed paper.
f Power socket
Connect the power cord.
g Extension cover
Protects paper supply in the cassette from dirt and dust.
d Telephone line jack
Connect the telephone cable.
Getting Acquainted With Your Machine
2-13
The Operation Panel
l
FAX-L380S
COPY
FAX
DEF
ABC
01
02
03
1
04
GHI
2
05
06
07
08
4
P
09
10
11
2
JKL
12
PQRS
OK
5
TUV
Setting Up Your Machine
7
13
14
15
16
17
18
19
20
3
MNO
6
WXYZ
8
9
0
T
FAX-L390
COPY
FAX
DEF
ABC
01
02
03
04
05
06
07
08
1
GHI
4
P
09
10
11
12
PQRS
OK
14
15
16
17
18
19
20
3
MNO
5
TUV
7
13
2
JKL
6
WXYZ
8
9
0
T
a Menu button
h
Use this button to customize the operation of the machine.
b
In Use/Memory indicator
Lights when the telephone line is used or a document has been
received in memory.
i Numeric buttons
Use these buttons to enter numbers and names when registering
information, and to dial fax/telephone numbers.
c LCD display
The LCD display shows messages and prompts while you use the
machine.
d
System Monitor button
Use this button to check the status of copy, fax, print and report
jobs.
2-14
k
Getting Acquainted With Your Machine
Enlarge/Reduce button
Use this button to set an enlargement or reduction ratio of a copy.
l
Exposure button
Use this button to adjust the copy exposure.
Alarm indicator
This indicator flashes when an error occurs, or when the machine
is out of paper or toner.
g
Use this button to use tone dialing temporarily when your machine
is set for pulse dialing.
FAX button
Use this button to switch standby display to Fax mode.
f
j Tone button
COPY button
Use this button to switch standby display to Copy mode.
e
Energy Saver button
Use this button to set or cancel the energy saver mode manually.
The button lights green when the energy saver mode is enabled.
m
Image Quality button
Use this button to select the resolution the machine will use for
the document you want to fax, or copy.
n
s
Stop/Reset button
Directory button
Use this button to cancel sending or receiving faxes and other
operations, and bring back the standby display in the LCD.
o
(-),
Use this button to look up fax/telephone numbers registered for
speed dialing.
t
(+) buttons
Coded Dial button
Use this button to scroll through the selections.
Use this button to dial a fax/telephone number that you have
registered for Coded Speed Dialing.
p OK button
u
Use this button to determine the contents you set or register.
q
P
Use this button to begin faxing, or copying.
r
Redial/Pause button
Use this button to redial the last number that was dialed using the
numeric buttons, or to enter pauses in a fax number.
Start button
v One-Touch Speed Dial buttons
Hook button
Use these buttons for One-Touch Speed Dialing.
Use this button to dial, even with the optional handset still in the
handset cradle.
w One-Touch Speed Dial panel
Open this panel to access the registration buttons.
Setting Up Your Machine
2
Special Function Buttons (One-Touch Speed Dial Panel
Open)
21
22
23
24
25
26
27
28
29
30
31
32
Receive
Mode
Report
Delayed
Transmission
Polling
R
Space
Delete
Clear
a Report button
Use this button to print activity reports.
b Receive Mode button
Use this button to select the receive mode for receiving faxes.
c R button
Use this button to dial an outside line access number when the
machine is connected through a switchboard (PBX).
d Space button
Use this button to enter a space between letters and numbers
when you are registering information.
e Delayed Transmission button
Use this button to register a time for delayed sending.
f Polling button
Use this button to set a document for polling sending, and to poll
the other fax to receive a document.
g Clear button
Use this button to clear an entire entry during information
registration.
h Delete button
Use this button to delete characters one by one.
Getting Acquainted With Your Machine
2-15
Energy Saver Mode
2
NOTE
Setting Up Your Machine
The machine provides an energy saver function. When no operations are performed for about 5
minutes, the machine automatically enters the energy saver mode.
• The energy saver function does not activate when the machine is in the following status:
• The time until the machine enters the energy saver mode can be specified in a range of 3 minutes to 30 minutes.
You can also turn off the energy saver function. (See Chapter 15, “The Menu System.”)
- When printing out copies, faxes or other pages
- When sending or receiving faxes
- While a copy job is saved in memory or when the reserve copy or other functions are operating, or when the In
Use/Memory indicator lights up
- When paper jams occur
- When an error code appears and the Alarm indicator flashes
- When no paper is loaded in the cassette
Setting the Energy Saver Mode Manually
1
Press [Energy Saver].
The LCD is turned off and [Energy Saver] lights up.
NOTE
Right after the machine is restored from the energy saver mode, or right after copying finishes, wait about 2
seconds before pressing [Energy Saver].
Restoring from the Energy Saver Mode
1
Press [Energy Saver].
[Energy Saver] goes off and the machine enters standby mode.
NOTE
The machine can be restored from the energy saver mode immediately. However, it may vary according to room
temperature and circumstances.
2-16
Energy Saver Mode
The Toner Cartridge
Handling and Storing Cartridges
• Do not open the drum protective shutter on the cartridge. If the drum surface is exposed to light and
• Do not stand the cartridge on end, and do not turn it upside down. If toner becomes caked in the
cartridge, it may prove impossible to free it even by shaking the cartridge.
• Keep the cartridge away from computer screens, disk drives, and floppy disks. The magnet inside the
cartridge may harm these items.
HDD
• Never touch the drum protective shutter. When holding the cartridge, avoid touching the drum
protective shutter with your hands.
The Toner Cartridge
2
Setting Up Your Machine
damaged, print quality may deteriorate.
2-17
• Do not expose the cartridge to direct sunlight or bright light for longer than 5 minutes.
• Do not store the cartridge in direct sunlight.
• Avoid locations subject to high temperature, high humidity, or rapid changes in temperature. Store the
cartridge between 0° and 35°C.
• Hold the cartridge as shown so that your hand is not touching the drum’s protective shutter.
• Store the cartridge in its protective bag. Do not open the bag until you are ready to install the
cartridge in the machine.
• Save the protective bag. You may need to repack and transport the cartridge at a later date.
• Do not store the cartridge in salty air or where there are corrosive gases such as from aerosol
sprays.
• Do not remove the cartridge from the machine unless necessary.
• Be sure to remove the toner cartridge from the machine when disposing of the machine.
Setting Up Your Machine
2
CAUTION
DO NOT PLACE THE CARTRIDGE IN FIRE. TONER POWDER IS FLAMMABLE.
Installing/Replacing the Toner Cartridge
The machine uses the Canon Cartridge W. The procedure on the next page explains how to install the
cartridge for the first time, and how to replace it when the toner runs out.
When the message <REPLACE CARTRIDGE> appears, the toner in the cartridge may simply be
unevenly distributed. Before replacing the cartridge, follow the instructions on p. 2-19 to evenly
distribute the toner. If the message remains displayed or the print quality is low, after doing this replace
the cartridge as described below.
NOTE
Canon makes numerous cartridges. However, the Canon genuine Cartridge W Starter and the Canon genuine
regular Cartridge W are the only one which Canon recommends you to use with your machine. The Canon
genuine Cartridge W Starter that comes with your machine can yield approx. 2,500 page of printouts (based on
5% coverage of a A4-size page), while the Canon genuine Cartridge W you purchase can yield approx. 3,500
page of printouts (based on 5% coverage of a A4-size page). But the Canon genuine Cartridge W Starter is
identical to the Canon genuine regular Cartridge W otherwise.
2-18
1
Remove any documents and/or printed pages from the machine.
2
Make sure the machine is plugged in.
3
Remove the cartridge from the bag. Keep the bag in a safe place for future use.
The Toner Cartridge
4
Gently rock the cartridge several times to evenly distribute the toner inside.
INSTRUCTIONS
DRUM PROTECTIVE SHUTTER
NOTE
Always hold the cartridge as shown so that the side with the instructions is facing upward. Do not forcefully move
or push the protective shutter of the drum in any way.
5
Hold the cartridge on a flat stable surface with one hand, and break the tab and pull out the seal
completely with the other hand.
TAB
6
Open the printer cover.
NOTE
If you are replacing the old cartridge with the new one, remove the old cartridge from the machine. Then, discard
the old toner cartridge immediately according to the local laws and regulations for disposal of consumables.
The Toner Cartridge
2-19
Setting Up Your Machine
2
7
Hold the cartridge and position the arrow mark on the cartridge towards the inside of the machine as
shown below.
2
Setting Up Your Machine
8
9
2-20
Align the projections
on both sides of the cartridge to the guides
cartridge completely into the machine.
Close the printer cover.
The Toner Cartridge
in the machine and slide the
Loading Recording Paper
When the message <SUPPLY REC. PAPER> appears in the LCD display, you need to add paper to the
paper cassette. Here are a few tips you should follow when you load paper into the paper cassette.
Chapter 4, “Paper Handling.”)
• Stack the paper so that the top and bottom edges and sides are straight and even before placing it in
the paper cassette.
• Do not print on both sides of the paper. Doing so may cause several sheets to feed into the machine
at the same time.
• Let the paper run out before you refill the paper cassette.
• Avoid mixing new stock with paper already loaded in the paper cassette. When adding new stock to
the cassette, be sure to remove the remaining paper in the cassette and reload it together with the
new stock. Failure to do so may cause paper jams.
NOTE
• Do not use damp, curled, wrinkled, or torn paper as these can cause paper jams or poor print quality.
• Highly textured, extremely smooth or shiny paper does not print well.
• The laser printing process uses high temperatures to fuse toner to the paper. Use paper that will not melt,
•
•
•
•
vaporize, discolor, or emit dangerous fumes at temperatures near 170°C. For example, do not use vellum paper in
a laser printer. Make sure any letterhead or colored paper you use can withstand high temperatures.
Make sure the paper is free of dust, lint, and oil stains.
To keep the paper from curling, do not open paper packs until you are ready to use the paper. Store unused paper
from opened packs in a cool, dry location in the original packaging.
Your machine is factory-set to use A4-size paper in the paper cassette.
If you wish to use different sized paper, you must change the setting using the <PAPER SETTINGS> menu.
See p. 15-2 for more details.
Refer to Chapter 4, “Paper Handling,” for more details on the types of media you can load in the paper cassette.
CAUTION
Do not load paper in the multi-purpose feeder when the machine is printing.
Loading Recording Paper
2-21
2
Setting Up Your Machine
• Be sure to load paper of the correct size, weight, and quantity recommended for your machine. (See
Loading Paper in the Cassette
1
Pull out the cassette completely.
CAUTION
Be sure to completely remove the paper cassette from the machine and place on a flat surface before
performing the following steps. Failure to do so, may cause the machine tip over, and result in personal
injury.
2
Setting Up Your Machine
2
Adjust the length slide guide to match the paper size.
FAX-L380S
FAX-L390
For the FAX-L390 model, be sure to properly attach the stopper of the paper size rear guide for the correct paper
size by inserting the tabs into the matching slots on the paper cassette.
3
2-22
Adjust the width slide guides or paper width guides to match the paper size.
Loading Recording Paper
4
Load the paper into the cassette. Make sure the paper stack sits below the hooks for the FAX-L380S
model.
HOOKS
5
Even out the edges of the paper stack.
Make sure the height of the paper stack does not exceed the load limit mark.
HOOK
HOOKS
LOAD LIMIT
MARK
LOAD LIMIT
MARK
HOOK
6
Insert the cassette into the machine as far as it will go.
NOTE
If you do not completely insert the cassette into the machine, paper jams may occur.
Testing the Machine
After you have assembled your machine, installed the toner cartridge, loaded plain paper in the paper
cassette, you can make sure the machine is printing properly by making several copies of a document.
For instructions, see Chapter 10, “Making Copies.”
Note the following:
• If the printed sheets are curled as they exit the machine, remove them from the output slot
immediately to avoid paper jams.
• Make sure your text or graphics fall within the printable area.
Loading Recording Paper
2-23
Setting Up Your Machine
2
Registering Information in the
Machine
3
CHAPTER
This chapter describes how to enter information in your machine.
Guidelines for Entering Information
The following section explains how to enter user information into the machine.
NOTE
If you pause while entering information and do not make an entry for more than a specified period of time, the
machine returns to standby mode and loses all information you had entered up to that point. You will then have to
start again. The time until the machine returns to the standby mode can be specified in a range of 1 to 9 minutes.
You can also turn off the AUTO CLEAR function. (See Chapter 15, “The Menu System.”)
Entering Numbers, Letters, and Symbols
Each numeric button has a number and a group of uppercase and lowercase letters assigned to it. Use
the chart below to determine which numeric button to press for each character.
NOTE
The characters that appear when you press the numeric buttons differ depending on the display language you
select. For details on selecting the display language, see “Setting the Display Language,” on p. 2-10.
Guidelines for Entering Information
3-1
Button
Registering Information in the Machine
3
Uppercase
Lowercase
1
@.–_/
@.–_/
2
ABC
abc
3
DEF
def
4
GHI
ghi
5
JKL
jkl
6
MNO
mno
7
PQRS
pqrs
8
TUV
tuv
9
WXYZ
wxyz
0
Uppercase
#
–.
#!“,;:^
Lowercase
Number
_=/|’?$@%&+\ ()[]{}<>
Follow this procedure when you come to a step that requires you to enter a name or number.
1
Press [
(:1).
] to switch to the uppercase letter mode (:A), lowercase letter mode (:a), or the number mode
You can see what mode you are in by the character indicated on the top right corner of the LCD display.
:A
_
2
Use the numeric buttons to enter the letter or number.
Press the button repeatedly until the letter or number you want appears.
● To enter two letters or symbols that are under the same button:
❑ Press the numeric button ➞ [ (+)] ➞ press the same numeric button again.
For example, to enter <DD> you would press [3] ➞ [
(+)] ➞ [3].
● To enter a space:
❑ Press [Space] under the One-Touch Speed Dial panel.
● To delete a character:
❑ Press [Delete] under the One-Touch Speed Dial panel.
● To delete an entire entry:
❑ Press [Clear] under the One-Touch Speed Dial panel.
3-2
Guidelines for Entering Information
Personalizing Your Machine
Identifying Your Documents
When sending documents, you can have your fax number, your name, and the current date and time
printed out by the receiving fax. This information is called your TTI (Transmit Terminal Identification)
and appears at the top of the faxed document in small type.
xxxx
THE DATE AND TIME
YOU SENT THE
DOCUMENT
YOUR FAX/
TELEPHONE
NUMBER
YOUR NAME OR
COMPANY NAME
THE NAME OF THE
PARTY WHO IS
RECEIVING THE
FAX*
THE PAGE NUMBER
*
When using speed dialing, the top line also includes the name registered under the speed dialing button or code you
entered.
Entering the Date and Time
Follow this procedure to enter the date and time:
1
Press [Menu].
2
Press [
(-)] or [
(+)] to select <7.TIMER SETTINGS> ➞ press [OK] twice.
Personalizing Your Machine
3
Registering Information in the Machine
By identifying the documents you send, the receiving party can recognize your fax messages at a
glance. Here is a sample document with the identifying information:
3-3
3
Use the numeric buttons to enter the date (month/day/year) and time (in 24-hour format) ➞ press [OK].
DATE/TIME SETTING
TIMER SETTINGS
31/12 '05 15:10 ➞ 2.AUTO CLEAR
Enter only the last 2 digits of the year.
4
Press [Stop/Reset] to return to standby mode.
Registering Your Fax Number and Name
Follow this procedure to register your fax/telephone number and name:
Registering Information in the Machine
3
1
Press [Menu].
2
Press [
3
(-)] or [
(+)] to select <4.FAX SETTINGS> ➞ press [OK] four times.
Use the numeric buttons to enter your fax/telephone number (Max. 20 digits, including spaces) ➞ press
[OK].
USER TEL NO.
TEL LINE SETTINGS
123xxxxxxx ➞ 2.TEL LINE TYPE
For details on how to enter or delete numbers, see “Entering Numbers, Letters, and Symbols,” on p. 3-1.
4
Press [Menu] ➞ [
5
Use the numeric buttons to enter your name (Max. 24 characters, including spaces) ➞ press [OK].
(-)] or [
(+)] to select <2.UNIT NAME> ➞ press [OK].
:A
Canon
➞
USER SETTINGS
3.TX TERMINAL ID
For details on how to enter or delete characters, see “Entering Numbers, Letters, and Symbols,” on p. 3-1.
6
3-4
Press [Stop/Reset] to return to standby mode.
Personalizing Your Machine
Setting the Telephone Line Type
Use this procedure if you need to change the telephone line setting.
If you are unsure which setting to use, contact your local telephone company.
Follow this procedure to set the telephone line type:
Press [Menu].
2
Press [
(-)] or [
(+)] to select <4.FAX SETTINGS> ➞ press [OK] three times.
3
Press [
(-)] or [
(+)] to select <2.TEL LINE TYPE> ➞ press [OK].
4
Press [
(-)] or [
(+)] to select the telephone line type ➞ press [OK].
3
Registering Information in the Machine
1
TEL LINE TYPE
TEL LINE SETTINGS
TOUCH TONE ➞ 3.TX START SPEED
You can select from the following:
- <TOUCH TONE> for tone dialing
- <ROTARY PULSE> for pulse dialing
5
Press [Stop/Reset] to return to standby mode.
Setting the Summer Time*
Some countries adopt the summer time system that shifts the clock time ahead or back according to
the change in seasons. You can select if the time information in your machine changes to match your
country’s summer time system and set the day and time when the summer time begins and ends.
1
Press [Menu].
2
Press [
(-)] or [
(+)] to select <7.TIMER SETTINGS> ➞ press [OK].
3
Press [
(-)] or [
(+)] to select <5.SUMMER TIME> ➞ press [OK].
Press [
[OK].
(-)] or [
(+)] to select <ON> to enable the summer time setting or <OFF> to disable it ➞ press
4
If you selected <ON>, go to step 5.
If you selected <OFF>, go to step 12.
*
The Summer Time feature is available for certain countries only.
Personalizing Your Machine
3-5
5
Press [OK] twice.
6
Press [
(-)] or [
(+)] to select the month in which the summer time starts ➞ press [OK] twice.
MONTH
7
Press [
(-)] or [
APRIL ➞
WEEK
FIRST WEEK
(+)] to select the week in which the summer time starts ➞ press [OK] twice.
You can select from the following:
- <FIRST WEEK>
- <SECOND WEEK>
- <THIRD WEEK>
- <FOURTH WEEK>
- <LAST WEEK> (fourth or fifth week depending on the selected month)
Registering Information in the Machine
3
WEEK
8
Press [
SECOND WEEK ➞
(-)] or [
SUNDAY
(+)] to select the day of the week on which the summer time starts ➞ press [OK] twice.
DAY
9
DAY
SUNDAY ➞
TIME
02:00
Use the numeric buttons to enter the time at which the summer time compensation is made ➞ press [OK]
three times.
Use the 24-hour format for the time (e.g., 2:00 p.m. as 14:00) and precede single digits with a zero.
TIME
10
3-6
02:00 ➞
MONTH
OCTOBER
Press [ (-)] or [ (+)] and [OK] to select the month, week, day of the week, and time when the summer
time ends, as in steps 6 to 9 for the <1.BEGIN DATE/TIME> settings. (e.g. OCTOBER LAST WEEK,
SUNDAY and 03:00)
11
Press [OK].
12
Press [Stop/Reset] to return to standby mode.
Personalizing Your Machine
Paper Handling
4
CHAPTER
This chapter describes how to select and prepare the print media for the different functions your machine can perform.
Print Media Requirements
For high-quality printing, we recommend using paper and transparencies recommended by Canon.
Some types of paper available at office supply stores may not be suitable for the machine. If you have
any questions about paper and transparencies, contact your local authorized Canon dealer or the
Canon help line.
■ Paper Storage
In order to prevent paper jams, do the following:
• To prevent moisture buildup, store remaining paper wrapped tightly in its original package. Store
paper in a dry location, out of direct sunlight.
• To prevent curling, store paper flat, not upright.
• If the paper is curled, uncurl it before loading it in the cassette or multi-purpose feeder. Failure to do
so will cause paper creases and a paper jam.
■ Unacceptable Paper
Do not print on the following types of paper stock. Doing so may result in paper jams.
• Severely curled or wrinkled paper
• Transparencies designed for full-color copiers or printers
• Paper which has already been copied using a digital full-color copier (Do not print on the reverse
side.)
• Paper which has been printed on using a thermal transfer printer (Do not print on the reverse side.)
IMPORTANT
Never attempt to print on full-color transparencies. Doing so may result in product malfunction.
Print Media Requirements
4-1
■ Acceptable Paper
Cassette
Multi-Purpose Feeder
FAX-L380S: A4, B5, A5, LTR, EXECUTIVE
Envelope (COM10, MONARCH, DL, ISO-C5)
Free Size: 216 mm × 356 mm [Max.]/76 mm ×
127 mm [Min.]
FAX-L390: A4, LTR
Paper Size
A4, B5, A5, LTR, LGL, EXECUTIVE
Envelope (COM10, MONARCH, DL, ISO-C5)
Free Size: 216 mm × 356 mm [Max.]/76 mm ×
127 mm [Min.]
64 g/m2 to 128 g/m2
Paper Weight
FAX-L380S: Plain paper, Plain paper L, Heavy
paper, Heavy paper H, Transparency
FAX-L390: Plain paper, Plain paper L
Paper Type
Plain paper, Plain paper L, Heavy paper, Heavy
paper H, Transparency
IMPORTANT
4
You cannnot use multi-purpose feeder for FAX.
Paper Handling
NOTE
• The printing speed may become slower than usual depending on the paper size, the paper type, and the number
of sheets you specify. This is because the machine’s safety function works to prevent the failure due to heat.
• Some types of paper may not feed properly into the cassette or the multi-purpose feeder.
Printing Areas
Please note that the term “printing area” represents both the recommended area for optimum print
quality and the entire area where the machine can technically print from your computer.
Printing area (light shade): Canon recommends that you print within this area.
■ Paper
MAX. 5 mm
MAX. 5 mm
MAX. 5 mm
Feeding
direction
MAX. 5 mm
■ Envelope
MAX. 5 mm
MAX. 5 mm
MAX. 5 mm
Feeding
direction
MAX. 5 mm
NOTE
Copying areas are a little larger than printing areas.
4-2
Print Media Requirements
Loading Paper
This section describes how to load paper in the cassette and the multi-purpose feeder.
CAUTION
• When loading paper, take care not to cut your hands on the edges of the paper.
• Be sure to completely remove the paper cassette from the machine and place on a flat surface before
performing the following steps. Failure to do so, may cause the machine tip over, and result in
personal injury.
• The paper in the multi-purpose feeder is fed prior to the paper in the cassette.
• The cassette holds up to approx. 250 sheets (FAX-L380S)/500 sheets (FAX-L390) of 64 g/m2 paper or approx. 20
envelopes*.
*Only for the FAX-L380S model.
.
Loading Paper in the Cassette
1
Pull out the cassette completely.
2
Pinch and slide the length slide guide to fit the size of the paper stack you want to load.
For the FAX-L390 model, attach the stopper of the paper size rear guide for the desired paper size by inserting
the tabs into the matching slots on the paper cassette.
FAX-L380S
FAX-L390
IMPORTANT
• If the slide guides (FAX-L380S) are not adjusted correctly for the size of the paper, the quality of your printouts
may be adversely affected.
• For the FAX-L390 model, be sure to properly attach the stopper of the paper size rear guide for the correct paper
size.
Loading Paper
4-3
Paper Handling
4
NOTE
3
Adjust the width slide guides or paper width guides to match the paper size.
4
Fan the paper stack first, then tap the edges on a flat surface to even the stack.
5
Load the paper stack in the cassette with the print side down.
Paper Handling
4
When you load paper with a logo on, position the paper with the print side down (logo side) and load it so that the
top of the paper feeds first in the cassette.
Make sure the paper stack does not exceed the load limit mark.
HOOK
HOOKS
LOAD LIMIT
MARK
LOAD LIMIT
MARK
HOOK
4-4
Loading Paper
6
Insert the cassette into the machine.
NOTE
If you do not completely insert the cassette into the machine, paper jams may occur.
7
Specify the paper size and type.
❑ Press [Menu] ➞ [OK].
❑ Press [ (-)] or [ (+)] to select <1.CASSETTE> ➞ press [OK] twice.
❑ Press [ (-)] or [ (+)] to select the appropriate paper size ➞ press [OK] twice.
❑ Press [ (-)] or [ (+)] to select the appropriate paper type ➞ press [OK].
❑ Press [Stop/Reset] to return to standby mode.
IMPORTANT
the loaded paper first. Then put it together with the extra paper and tap the edges. After that, reload it in the
cassette.
NOTE
• Select <ENVELOPE> for envelopes. For details on loading envelopes in the cassette*, see “Loading Envelopes in
the Cassette,” on p. 4-5.
• For information on how to use non-standard size paper, see “Loading Paper in the Multi-Purpose Feeder,” on p.
4-8, or “Loading an Envelope in the Multi-Purpose Feeder,” on p. 4-9.
*Only for the FAX-L380S model.
Loading Envelopes in the Cassette
NOTE
• Loading Envelopes in the Cassette is only for the FAX-L380S model.
• Load an envelope in the multi-purpose feeder when you use the FAX-L390 model. For details on loading an
envelope in the multi-purpose feeder, see “Loading an Envelope in the Multi-Purpose Feeder,” on p. 4-9.
1
Arrange the stack of envelopes on a firm, clean surface, and press down firmly on the edges to make the
folds crisp.
Press all the way around the envelopes to remove any curls and expel air from inside the envelopes. Also, press
firmly on the area that corresponds to the edges of the back flap.
Loading Paper
4-5
4
Paper Handling
• Do not load different size and type of paper at the same time.
• Do not load extra paper when there is still paper left in the cassette. If you load extra paper while printing, remove
2
Remove any curling from the envelopes by holding the edges diagonally and bending them gently.
3
Run a pen or other rounded object along the back flaps to flatten them.
The flaps should not bulge more than 5 mm.
4
Paper Handling
FLAP
4
Tap the edges on a flat surface to even the envelopes.
5
Pull out the cassette completely.
6
Pinch and slide the length slide guide to fit the size of the envelopes you want to load.
IMPORTANT
If the slide guides are not adjusted correctly for the size of the envelopes, the quality of your printouts may be
adversely affected.
4-6
Loading Paper
7
Load the envelopes with the print side down and the right edge (i.e., closer to the stamp) first.
If the envelope to be loaded has a flap on the short edge, this edge must enter the machine first. Not loading it
this way will result in a paper jam.
Pinch and slide the width slide guides to fit the envelopes.
4
Paper Handling
8
Make sure the envelopes do not exceed the load limit mark.
HOOKS
HOOK
LOAD LIMIT
MARK
HOOK
9
Insert the cassette into the machine.
NOTE
If you do not completely insert the cassette into the machine, paper jams may occur.
10
Specify the paper size and type.
❑ Press [Menu] ➞ [OK].
❑ Press [ (-)] or [ (+)] to select <1.CASSETTE> ➞ press [OK] twice.
❑ Press [ (-)] or [ (+)] to select <ENVELOPE> ➞ press [OK].
❑ Press [ (-)] or [ (+)] to select the appropriate envelope type ➞ press [OK] twice.
❑ Press [ (-)] or [ (+)] to select <HEAVY PAPER> or <HEAVY PAPER H> ➞ press [OK].
❑ Press [Stop/Reset] to return to standby mode.
Loading Paper
4-7
Loading Paper in the Multi-Purpose Feeder
Use the multi-purpose feeder when you want to copy or print on the different paper which is in the
cassette. Load paper one by one in the multi-purpose feeder.
NOTE
The paper in the multi-purpose feeder is fed prior to the paper in the cassette.
1
Slide the slide guides to fit the size of the paper you want to load.
Paper Handling
4
IMPORTANT
If the slide guides are not adjusted correctly for the size of the paper, the quality of your printouts may be adversely
affected.
2
Insert the paper straightly into the multi-purpose feeder with the print side up.
NOTE
When you load paper with a logo on it, position the paper with the print side up (logo side) and insert it so that the
top of the paper feeds first in the multi-purpose feeder.
4-8
Loading Paper
3
Specify the paper size.
❑ Press [Menu] ➞ press [OK].
❑ Press [ (-)] or [ (+)] to select <2.MP TRAY> ➞ press [OK] twice.
❑ Press [ (-)] or [ (+)] to select the appropriate paper size ➞ press [OK] twice.
NOTE
• Select <ENVELOPE> for envelopes. For details on loading an envelope in the multi-purpose feeder, see “Loading
an Envelope in the Multi-Purpose Feeder,” on p. 4-9.
• When <FREESIZE> is selected, you can specify vertical and horizontal sizes of the paper in the following ranges:
- <VERTICAL SIZE>: 127 mm to 356 mm
- <HORIZONTAL SIZE>: 76 mm to 216 mm
4
Specify the paper type.
❑ Press [ (-)] or [ (+)] to select the appropriate paper type ➞ press [OK].
❑ Press [Stop/Reset] to return to standby mode.
Paper Handling
4
Loading an Envelope in the Multi-Purpose Feeder
Use the multi-purpose feeder when you want to copy or print an envelope one by one.
IMPORTANT
The recommended envelopes are COM10, MONARCH, DL, and ISO-C5. Using other envelopes may affect the
quality of the printout.
NOTE
The envelope in the multi-purpose feeder is fed prior to the paper in the cassette.
1
Slide the slide guides to fit the size of the envelope you want to load.
Loading Paper
4-9
IMPORTANT
If the slide guides are not adjusted correctly for the size of the envelope, the quality of your printouts may be
adversely affected.
2
Insert the envelope straightly in the multi-purpose feeder with the print side up and the right edge (i.e.,
closer to the stamp) first.
If the envelope to be loaded has a flap on the short edge, this edge must enter the machine first. Not loading it
this way will result in a paper jam.
Paper Handling
4
3
Specify the paper size.
❑ Press [Menu] ➞ press [OK].
❑ Press [ (-)] or [ (+)] to select <2.MP TRAY> ➞ press [OK] twice.
❑ Press [ (-)] or [ (+)] to select <ENVELOPE> ➞ press [OK].
❑ Press [ (-)] or [ (+)] to select the appropriate envelope type ➞ press [OK] twice.
NOTE
You can select <FREESIZE> instead of <ENVELOPE> as the paper size. When <FREESIZE> is selected, you
can specify vertical and horizontal sizes of the envelope in the following ranges:
- <VERTICAL SIZE>: 127 mm to 356 mm
- <HORIZONTAL SIZE>: 76 mm to 216 mm
4
Specify the paper type.
❑ Press [ (-)] or [ (+)] to select <HEAVY PAPER> or <HEAVY PAPER H> ➞ press [OK].
❑ Press [Stop/Reset] to return to standby mode.
4-10
Loading Paper
Orientation of the Document and the Paper Loading
When you load a document in the ADF, the orientation of the document and the orientation of the paper
in the cassette or in the multi-purpose feeder are as shown below.
DOCUMENT
PAPER
4
MULTI-PURPOSE
FEEDER
COPY
Paper Handling
CASSETTE
Loading Paper
4-11
Selecting the Paper Output Area
Face down paper output delivers paper with the printed side down on the output tray. Face up paper
output delivers paper with the printed side up out of the face up paper output. Select the area
depending on your purpose by opening or closing the rear cover.
Open the rear cover for face up paper output, or close the rear cover for face down paper output.
Paper Handling
4
IMPORTANT
Do not open or close the rear cover while copying and printing.
Paper Type and Paper Output Area
Select the suitable paper output area depending on the paper type and your purpose.
Paper Type
Paper Output Area
The Number of Output Sheets
face up
1 sheet
face down
approx. 50 sheets
(64 g/m2)
Plain Paper L
face up
1 sheet
face down
approx. 50 sheets
(64 g/m2 to 90 g/m2)
Plain Paper
face up
1 sheet
face down
approx. 30 sheets
(91 g/m2 to 105 g/m2)
Heavy Paper
face up
1 sheet
face down
approx. 30 sheets
(106 g/m2 to 128 g/m2)
face up
1 sheet
face down
approx. 10 sheets
Heavy Paper H
Transparencies
4-12
Selecting the Paper Output Area
Face Down Paper Output Area
The paper is delivered with the printed side down on the output tray.
Paper is stacked in printed order.
Close the rear cover.
Paper Handling
4
IMPORTANT
• Do not place the delivered paper back on the output tray. Doing so may result in paper jams.
• Do not place objects other than paper on the output tray. Doing so may result in paper jams.
• It is recommended to fold up the document feeder when printing many pages.
Face Up Paper Output Area
The paper is delivered with the printed side up out of the face up paper output on the back side of the
machine. This way is convenient for printing on transparencies, envelopes, or labels which tend to curl,
because the paper is delivered straight through out of the machine.
Open the rear cover.
• Remove the delivered paper one by one.
IMPORTANT
• Do not pull the paper forcibly.
• The machine has no face up output tray. Remove the delivered paper with your hand.
• Do not place an object in front of the face up paper output to prevent a paper jam.
Selecting the Paper Output Area
4-13
5
Speed Dialing
CHAPTER
This chapter describes how to register and use the speed dialing features of the machine.
Speed Dialing Methods
In addition to regular dialing, the machine provides several ways to dial fax/telephone numbers
automatically.
■ One-Touch Speed Dialing
Dial a fax/telephone number by pressing the One-Touch Speed Dial button that the number is assigned to.
■ Coded Speed Dialing
Dial a fax/telephone number by pressing [Coded Dial] followed by a two-digit code (a three-digit code for the
FAX-L390 model) assigned to that number.
■ Group Dialing
Send a document to a pre-defined group of fax numbers. (The numbers must already be stored as One-Touch
Speed Dialing numbers or Coded Speed Dialing numbers.)
■ Directory Dialing
Dial a fax/telephone number by pressing [Directory] and entering the first letter of the other party’s name. In this
manner you can search for the fax/telephone number registered for One-Touch Speed Dialing.
The following pages describe how to register numbers for speed dialing. You will also find instructions
for changing numbers and names registered under speed dialing buttons and codes, and how to use
speed dialing.
Speed Dialing Methods
5-1
One-Touch Speed Dialing
Storing Numbers for One-Touch Speed Dialing
Your machine can store up to 32 fax numbers under One-Touch Speed Dial buttons. Follow this
procedure to store One-Touch Speed Dialing numbers and names.
Speed Dialing
5
1
Press [Menu].
2
Use [
3
4
(-)] or [
(+)] to select <5.ADD. REGISTRATION> ➞ press [OK] twice.
Press [ (-)], [ (+)], or the One-Touch Speed Dial button to select a One-Touch Speed Dial button under
which you want to register a fax/telephone number between 01 and 32 ➞ press [OK] twice.
• If a number is already stored under the button you select, that number appears.
• If the button you select is registered for Group Dialing, <GROUP DIAL> appears.
Use the numeric buttons to enter the telephone number (Max. 120 digits, including spaces and pauses) ➞
press [OK] twice.
TEL NUMBER ENTRY
TEL=123xxxx
➞
:A
• For details on how to enter or delete numbers, see “Entering Numbers, Letters, and Symbols,” on p. 3-1.
• Open the One-Touch Speed Dial panel ➞ press [Space] to enter spaces between numbers (spaces are
optional and are ignored during dialing).
• To enter a pause in the number, press [Redial/Pause] one or more times.
5
Use the numeric buttons to enter the name you want to store (Max. 16 letters, including spaces) ➞ press
[OK].
For details on how to enter or delete letters, see “Entering Numbers, Letters, and Symbols,” on p. 3-1.
6
To continue registering numbers, repeat steps 3 to 5.
-orIf you have finished registering numbers, press [Stop/Reset] to return to standby mode.
7
5-2
After you register a number for One-Touch Speed Dialing, it is recommended to write the name of the
other party on a destination label and stick it on the One-Touch Speed Dial panel above the number of the
One-Touch Speed Dial button where the number is registered.
One-Touch Speed Dialing
Changing or Deleting a Number/Name Stored Under a
One-Touch Speed Dial Button
Follow these steps if you want to change a number and/or name registered under a One-Touch Speed
Dial button, or if you want to delete all information stored under a button.
1
2
Follow steps 1 and 2 of “Storing Numbers for One-Touch Speed Dialing.” (See p.5-2.)
Use [ (-)], [ (+)], or the One-Touch Speed Dial button to select the One-Touch Speed Dial button you
want to change or delete ➞ press [OK] twice.
● To delete a number:
5
Open One-Touch Speed Dial panel ➞ press [Clear] to delete the number ➞ press [OK].
TEL NUMBER ENTRY
TEL=
➞
1-TOUCH SPD DIAL
2.NAME
Speed Dialing
3
❑ When you delete a number, the name registered for that number is also deleted.
4
Press [Stop/Reset] to return to standby mode.
● To change the number and/or name:
3
Open One-Touch Speed Dial panel ➞ press [Clear] to delete the previous entry.
4
Press the numeric buttons to enter the new number ➞ press [OK] twice.
TEL NUMBER ENTRY
TEL=124xxxx
➞
:a
Canon Europa
• For details on how to enter or delete numbers, see “Entering Numbers, Letters, and Symbols,” on p. 3-1.
• If you want to delete a digit, press [ (-)] or [ (+)] to move the cursor under the digit you want to delete ➞ press
[Delete].
• If you only want to change the name, press [OK] twice after step 2 ➞ open One-Touch Speed Dial panel ➞ go
to step 5.
• If you want to keep the same name, go to step 7.
5
Press [Clear] to delete the previous entry.
One-Touch Speed Dialing
5-3
6
Press the numeric buttons to enter the new name ➞ press [OK].
For details on how to enter or delete letters, see “Entering Numbers, Letters, and Symbols,” on p. 3-1.
7
To change additional numbers and/or names, repeat steps 2 to 6.
-orIf you have finished changing numbers and/or names, press [Stop/Reset] to return to standby mode.
Using One-Touch Speed Dialing
Once you have registered your numbers under One-Touch Speed Dial buttons, you can use them to
send documents as follows:
1
5
Load the document in the ADF.
Speed Dialing
For details on the types of documents you can fax, their requirements, and how to load documents, see
“Document Requirements,” on p. 6-1, and “Loading Documents in the ADF,” on p. 6-3.
2
Press [FAX].
If you are already in the Fax standby mode, you can skip this step.
3
4
Adjust any necessary settings for your document.
• Press [Image Quality] to select the fax resolution. (See “Adjusting the Image Quality (Resolution),” on p. 6-4.)
• Press [Exposure] to select the scan density. (See “Adjusting the Exposure (Density),” on p. 6-5.)
Press the One-Touch Speed Dial button assigned to the number to which you wish to fax.
TEL=
123xxxx
04 Canon U.K.
• The name registered under that One-Touch Speed Dial button is displayed. If no name is registered, the
number registered under that button will be displayed.
• If you mistakenly press the wrong One-Touch Speed Dial button, press [Stop/Reset] ➞ press the correct button.
• If no fax number is assigned to the One-Touch Speed Dial button you press, the LCD displays <NOT
REGISTERED>. If this happens, make sure you press the correct button and that the number you want to dial
is registered under that button.
5
Press [Start].
• If you do not press [Start] within 5 seconds of pressing the One-Touch Speed Dial button, the machine will
begin sending automatically. If you do not want the machine to send automatically, you need to change the
<TIME OUT> setting. See p.15-9 for more details.
• If an error occurs during sending, the machine will print an error report. If this happens, try sending the fax
again. See “Faxing Problems,” on p. 13-15 for details about errors.
NOTE
You can also use One-Touch Speed Dialing to send a document to more than one location at a time. For details,
see “Group Dialing,” on p. 5-9, and “Sequential Broadcasting,” on p. 6-13.
5-4
One-Touch Speed Dialing
Coded Speed Dialing
Storing Numbers for Coded Speed Dialing
You can store up to 100 numbers (168 numbers for the FAX-L390 model) for Coded Speed Dialing.
Follow this procedure to store Coded Speed Dialing numbers and names.
1
Press [Menu].
2
Press [
(-)] or [
(+)] to select <5.ADD. REGISTRATION> ➞ press [OK].
3
Press [
(-)] or [
(+)] to select <2.CODED SPD DIAL> ➞ press [OK].
Press [ (-)] or [ (+)] to select a two-digit code (00-99)* ➞ press [OK] twice.
• You can also select a code by pressing [Coded Dial] and entering the two-digit code* with the numeric buttons.
• If a number is already registered under the code you select, that number is displayed.
• If the code you select is registered for group dialing, <GROUP DIAL> appears.
*Select or enter a three-digit code (000 to 167) for the FAX-L390 model.
5
Use the numeric buttons to enter the telephone number (Max. 120 digits, including spaces and pauses) ➞
press [OK] twice.
TEL NUMBER ENTRY
TEL=456xxxx
:A
➞
• For details on how to enter or delete numbers, see “Entering Numbers, Letters, and Symbols,” on p. 3-1.
• Open the One-Touch Speed Dial panel ➞ press [Space] to enter spaces between numbers (spaces are
optional and are ignored during dialing).
• To enter a pause in the number, press [Redial/Pause] one or more times.
6
Use the numeric buttons to enter the name you want to store (Max. 16 letters, including spaces) ➞ press
[OK].
FAX-L380S
:A
Canon OPTICS
➞
CODED SPD DIAL
03=
➞
CODED SPD DIAL
003=
FAX-L390
:A
Canon OPTICS
For details on how to enter or delete letters, see “Entering Numbers, Letters, and Symbols,” on p. 3-1.
7
To continue registering numbers, repeat steps 4 to 6.
-orIf you have finished registering numbers, press [Stop/Reset] to return to standby mode.
Coded Speed Dialing
5-5
Speed Dialing
4
5
Changing or Deleting a Number/Name Stored under a
Coded Speed Dialing Code
Follow these steps if you want to change the number and/or name registered under a Coded Speed
Dialing code, or if you want to delete all information stored under a code.
1
Follow steps 1 to 3 of “Storing Numbers for Coded Speed Dialing.” (See p.5-5.)
2
Press [
(-)] or [
(+)] to select the code (00-99)* you want to change or delete ➞ press [OK] twice.
You can also select a code by pressing [Coded Dial] and entering the two-digit code* with the numeric buttons.
*Select or enter a three-digit code (000 to 167) for the FAX-L390 model.
● To delete a number:
5
Speed Dialing
3
Open One-Touch Speed Dial panel ➞ press [Clear] to delete the number ➞ press [OK].
TEL NUMBER ENTRY
TEL=
➞
CODED SPD DIAL
2.NAME
When you delete a number, the name registered for that number is also deleted.
4
Press [Stop/Reset] to return to standby mode.
● To change the number and/or name:
3
Open One-Touch Speed Dial panel ➞ press [Clear] to delete the previous entry.
4
Press the numeric buttons to enter the new number ➞ press [OK] twice.
TEL NUMBER ENTRY
TEL=457xxxx
➞
:A
Canon EUROPA
• For details on how to enter or delete numbers, see “Entering Numbers, Letters, and Symbols,” on p. 3-1.
• If you want to delete a digit, press [W(-)] or [X(+)] to move the cursor under the digit you want to delete ➞ press
[Delete].
• If you only want to change the name, press [OK] twice after step 2 ➞ open One-Touch Speed Dial panel ➞ go
to step 5.
• If you want to keep the same name, go to step 7.
5
5-6
Press [Clear] to delete the previous entry.
Coded Speed Dialing
6
Press the numeric buttons to enter the new name ➞ press [OK].
FAX-L380S
:A
➞
CODED SPD DIAL
03=
:A
➞
CODED SPD DIAL
003=
Canon ITALIA
FAX-L390
Canon ITALIA
For details on how to enter or delete letters, see “Entering Numbers, Letters, and Symbols,” on p. 3-1.
7
To change additional numbers and/or names, repeat steps 2 to 6.
-orIf you have finished changing numbers and/or names, press [Stop/Reset] to return to standby mode.
Once you have registered your numbers under Coded Speed Dialing codes, you can send documents
as follows:
1
Load the document in the ADF.
For details on the types of documents you can fax, their requirements, and how to load documents, see
“Document Requirements,” on p. 6-1, and “Loading Documents in the ADF,” on p. 6-3.
2
Press [FAX].
If you are already in the Fax standby mode, you can skip this step.
3
4
Adjust any necessary settings for your document.
• Press [Image Quality] to select the fax resolution. (See “Adjusting the Image Quality (Resolution),” on p. 6-4.)
• Press [Exposure] to select the scan density. (See “Adjusting the Exposure (Density),” on p. 6-5.)
Press [Coded Dial] ➞ use the numeric buttons to enter the two-digit code* assigned to the number to
which you wish to fax.
*Enter a three-digit code for the FAX-L390 model.
FAX-L380S
TEL=
FAX-L390
TEL=
➞
TEL=
456xxxx
04 Canon CANADA
➞
TEL=
456xxxx
004 Canon CANADA
• The name registered under that Coded Speed Dialing code is displayed. If no name is registered, the number
registered under that code will be displayed.
• If you mistakenly enter the wrong code, press [Stop/Reset] ➞ [Coded Dial] ➞ enter the correct code.
• If no fax number is assigned to the Coded Speed Dialing code you press, the LCD displays <NOT
REGISTERED>. If this happens, make sure you enter the correct code and that the number you want to dial is
registered under that code.
Coded Speed Dialing
5-7
Speed Dialing
5
Using Coded Speed Dialing
5
Press [Start].
• If you do not press [Start] within 5 seconds of entering the Coded Speed Dialing code, the machine will begin
sending automatically. If you do not want the machine to send automatically, you need to change the <TIME
OUT> setting. See p.15-9 for more details.
• If an error occurs during sending, the machine will print an error report. If this happens, try sending the fax
again. See “Faxing Problems,” on p. 13-15 for details about errors.
NOTE
You can also use Coded Speed Dialing to send a document to more than one location at a time. For details, see
“Group Dialing,” on p. 5-9, and “Sequential Broadcasting,” on p. 6-13.
Speed Dialing
5
5-8
Coded Speed Dialing
Group Dialing
Group dialing allows you to store as many as 131 numbers (199 numbers for the FAX-L390 model)
under One-Touch Speed Dial buttons or Coded Speed Dialing codes.
Creating Groups for Group Dialing
The numbers you register in a group must already be stored under One-Touch Speed Dial buttons or
Coded Speed Dialing codes. Each group is stored under a One-Touch Speed Dial button or a Coded
Speed Dialing code. Create groups for group dialing as follows:
1
Press [Menu].
2
Use [
(-)] or [
(+)] to select <5.ADD REGISTRATION> ➞ press [OK].
3
Use [
(-)] or [
(+)] to select <3.GROUP DIAL> ➞ press [OK].
Speed Dialing
5
● To register a group under a One-Touch Speed Dial button:
4
Use [ (-)], [ (+)], or the One-Touch Speed Dial button to select an unused One-Touch Speed Dial button
(01 to 32) ➞ press [OK] twice.
If a group or number is already registered under the button you select, <GROUP DIAL> or <1-TOUCH SPD
DIAL> is displayed.
● To register a group under a Coded Speed Dialing code:
4
Press [Coded Dial] ➞ use the numeric buttons to enter an unused two-digit code (00-99)* ➞ press [OK]
twice.
*Enter a three-digit code (000 to 167) for the FAX-L390 model.
FAX-L380S
GROUP DIAL
21=
➞
TEL=
➞
TEL=
FAX-L390
GROUP DIAL
021=
• If a group or number is already registered under the code you select, <GROUP DIAL> or <CODED SPD DIAL>
is displayed.
• To continue storing under a Coded Speed Dialing code, you can use [
(-)] or [
(+)] also.
Group Dialing
5-9
NOTE
• Each One-Touch Speed Dial button or Coded Speed Dialing code can store either a name and number for speed
dialing, or a group. Be careful not to override speed dialing numbers and names when creating groups.
• If you wish to register a group under a One-Touch Speed Dial button or Coded Speed Dialing code already
registered for speed dialing, or if you want to re-enter a group, you must delete the previous information first. See
p. 5-3 for more details.
5
Select the speed dialing numbers you want to register in the group ➞ press [OK] twice.
• To enter in the group a number stored under a One-Touch Speed Dial button, press the desired One-Touch
Speed Dial button(s).
• To enter a number stored under a Coded Speed Dialing code, press [Coded Dial] ➞ enter the two-digit code* for
the number using the numeric buttons. For multiple entries, press [Coded Dial] between each entry.
*Enter a three-digit code for the FAX-L390 model.
NOTE
• You cannot register numbers in the groups that have not been registered for One-Touch or Coded Speed Dialing.
• You can review the numbers registered under the group by pressing [ (-)] or [ (+)].
5
Speed Dialing
6
Enter the name using the numeric buttons for the group (Max. 16 letters, including spaces) ➞ press [OK].
FAX-L380S
:A
➞
GROUP DIAL
22=
:A
➞
GROUP DIAL
022=
UK GROUP
FAX-L390
UK GROUP
For details on how to enter or delete letters, see “Entering Numbers, Letters, and Symbols,” on p. 3-1.
7
To enter additional groups, repeat steps 4 to 6.
-orIf you have finished registering groups, press [Stop/Reset] to return to standby mode.
Changing or Deleting a Number/Name Stored under a
Group Dialing
Follow these steps if you want to change or delete the number/name registered under a Group Dialing.
1
Follow steps 1 to 3 of “Creating Groups for Group Dialing” (See p. 5-9.)
● To delete a number and a name:
2
Press [
3
Open One-Touch Speed Dial panel ➞ press [Clear] to delete the numbers registered under the group.
Press [
5-10
(-)] or [
(-)] or [
Group Dialing
(+)] to select the number you want to delete ➞ press [OK] twice.
(+)] to select the numbers you want to delete.
4
Press [OK] twice.
5
If you delete all the numbers registered under the group, press [Clear] to delete the name ➞ press [OK].
6
Press [Stop/Reset] to return to standby mode.
● To change the number and/or name:
2
Press [
3
Press [Clear] to delete the numbers registered under the group.
(+)] to select the number you want to change ➞ press [OK] twice.
Select the speed dialing numbers you want to register in the group ➞ press [OK] twice.
• To enter in the group a number stored under a One-Touch Speed Dial button, press the desired One-Touch
Speed Dial button(s).
• To enter a number stored under a Coded Speed Dialing code, press [Coded Dial] ➞ enter the two-digit code* for
the number using the numeric buttons. For multiple entries, press [Coded Dial] between each entry.
*Enter a three-digit code for the FAX-L390 model.
NOTE
• You cannot register numbers in the groups that have not been registered for One-Touch or Coded Speed Dialing.
• You can review the numbers registered under the group by pressing [ (-)] or [ (+)].
5
Press [Clear] to delete the name.
6
Press the numeric buttons to enter the new name ➞ press [OK].
For details on how to enter or delete letters, see “Entering Numbers, Letters, and Symbols,” on p. 3-1.
7
To change additional groups, repeat steps 2 to 6.
-orIf you have finished registering groups, press [Stop/Reset] to return to standby mode.
Group Dialing
5-11
5
Speed Dialing
4
(-)] or [
Using Group Dialing
To send a document to a group of numbers, follow these instructions.
1
Load the document in the ADF.
For details on the types of documents you can fax, their requirements, and how to load documents, see
“Document Requirements,” on p. 6-1, and “Loading Documents in the ADF,” on p. 6-3.
2
Press [FAX].
If you are already in the Fax standby mode, you can skip this step.
3
5
Speed Dialing
4
Adjust any necessary settings for your document.
• Press [Image Quality] to select the fax resolution. (See “Adjusting the Image Quality (Resolution),” on p. 6-4.)
• Press [Exposure] to select the scan density. (See “Adjusting the Exposure (Density),” on p. 6-5.)
Enter the group(s) stored under a One-Touch Speed Dial button(s) and/or Coded Speed Dialing code(s).
FAX-L380S
FAX-L390
TEL=GROUP DIAL
03 Canon GROUP
TEL=GROUP DIAL
03 Canon GROUP
TEL=GROUP DIAL
21 UK GROUP
TEL=GROUP DIAL
021 UK GROUP
• If you make a mistake when selecting a group, press [Stop/Reset] ➞ start again.
• The name registered under that One-Touch Speed Dial button or Coded Speed Dialing code is displayed.
• If you press a One-Touch Speed Dial button or Coded Speed Dialing code that has no group (or fax number)
•
5
registered under it, the LCD displays <NOT REGISTERED>. Make sure you press the correct One-Touch
Speed Dial button or enter the correct Coded Speed Dialing code, and that the group you want has been
registered correctly under that button or code.
After entering the first One-Touch Speed Dial button or Coded Speed Dialing code, you have 5 seconds to enter
another speed dialing button or code before the machine begins sending automatically. If you have entered
more than one speed dialing button or code, the machine waits for 10 seconds before it begins sending. If you
do not want the machine to send automatically, you need to change the <TIME OUT> setting. See p.15-9 for
more details.
Press [Start].
The machine then scans the document into memory, and begins dialing the numbers in the groups.
5-12
Group Dialing
Directory Dialing
Directory dialing allows you to look up the other party’s name you registered and retrieve the number
for dialing. This feature is convenient when you know the other party’s name but can not recall the
One-Touch Speed Dial button, the code for Coded Speed Dialing, or Group Dialing where the number
is registered.
1
Press [FAX].
If you are already in the Fax standby mode, you can skip this step.
Press [Directory].
:A
_
<NOT REGISTERED> appears if there are no numbers registered, and the display returns to dial entry mode.
3
Press a numeric button to enter the first letter of the name of the party you are searching for.
For example, if you want to search for a name that starts with the letter “H”, press [4 (GHI)] twice.
4
5
6
Press [OK].
• Entries starting with the letter you entered are displayed.
• If there is no entry that starts with the letter you entered, entries that start with the next letter will be displayed.
Press [ (-)] or [ (+)] to display the other names.
• Pressing [ (+)] displays the names of other parties in alphabetical order.
Pressing [ (-)] displays them in reverse order.
• When you reach the last name, the display returns to the first name.
Press [OK].
The other party’s fax number and name, or <GROUP DIAL> and the group’s name appear.
Directory Dialing
5-13
Speed Dialing
5
2
6
Sending Faxes
CHAPTER
This chapter describes how to use your machine to send faxes.
Preparing to Send a Fax
Document Requirements
The documents you load into the machine must meet the following requirements.
When loading a multi-page document:
Size:
Max.: 216 × 356 mm
(W × L)
Min.: 148 × 105 mm
Quantity:
Up to 50 A4-size, 50 LTR-size, or 20 LGL-size sheets
(1 sheet for sizes other than these)
Thickness:
0.07–0.13 mm
(For sheets thicker than this, load 1 sheet at a time)
All sheets should be of the same thickness.
Weight:
50–105 g/m2
All sheets should be of the same weight.
When loading a single-page document:
Size:
Max.: 216 mm × approx.1 m
(W x L)
Min.: 148 × 105 mm
Quantity
1 sheet
Thickness
0.06 – 0.23 mm
Weight:
50 – 240 g/m2
Preparing to Send a Fax
6-1
■ Problem documents
• To prevent paper jams in the Automatic Document Feeder (ADF), do not use any of the following
paper in the machine:
Sending Faxes
6
WRINKLED OR
CREASED PAPER
CURLED OR
ROLLED PAPER
TORN PAPER
CARBON PAPER OR
CARBON-BACKED
PAPER
COATED PAPER
ONION SKIN OR
THIN PAPER
• Remove all staples, paper clips, or any other fasteners before loading the document into the
Automatic Document Feeder (ADF).
• Make sure any glue, ink, or correction fluid on the paper is completely dry before loading the
document into the Automatic Document Feeder (ADF).
• If you have a document that will not feed into the machine properly, make a photocopy of the
document, then load the copy instead.
Scanning Area
The margins shown in the illustration below are outside the machine’s scanning area. Make sure your
document’s text and graphics do not extend into these margins.
A4
6-2
Preparing to Send a Fax
Loading Documents in the ADF
1
Fan the edges that will feed into the machine first, then tap the edges of multiple page documents on a
flat surface to even the stack.
Adjust the document guides to the width of the document.
3
Load the document in the ADF.
6
Sending Faxes
2
The document is now ready for scanning.
NOTE
• For multiple page documents, the pages are fed one by one from the top of the stack (from the first page).
• Wait until all pages of your document have been scanned before starting a new job.
• 50 sheets of A4-size documents can be set in the ADF. If more than 50 sheets of A4-size documents are set in the
ADF, paper jams may occur.
Preparing to Send a Fax
6-3
● Trouble With Multipage Documents
❑ If you have any trouble in feeding a multipage document, do the following:
1
Remove the stack and tap it on a flat surface to even the edges.
2
Gently insert the stack into the Automatic Document Feeder (ADF) until it stops.
6
Sending Faxes
NOTE
• If you have further trouble with page jams while feeding, see “Removing Jammed Paper from the ADF,” on p. 13-7.
• Wait until all pages of your document have been scanned completely before starting a new job.
Adjusting the Resolution and Contrast
Adjusting the Image Quality (Resolution)
Canon’s Ultra High Quality (UHQ™) imaging technology enables you to send faxes with a print quality
that is very close to that of the original document. The machine also lets you adjust the resolution it
uses in sending faxes to best suit your particular document.
The machine has 5 resolution settings:
• <STANDARD> is adequate for most text documents.
• <FINE> is suitable for documents with fine print (smaller than the print in this sentence).
• <PHOTO> is for documents that contain photographs. With this setting, areas of the document that
contain photos are automatically scanned with 256 levels of gray, rather than just two (black and
white). This gives a much better reproduction of the photos, though transmission time is longer.
• <SUPER FINE> is for documents that contain fine print and images (much smaller than the print in
this sentence), and its resolution is four times of <STANDARD>.
• <ULTRA FINE> is for documents that contain fine print and images (much smaller than the print in
this sentence), and its resolution is eight times of <STANDARD>.
NOTE
Fax transmission time will vary depending on what resolution setting is set.
6-4
Preparing to Send a Fax
Set the resolution as follows:
1
Press [FAX].
If you are already in the Fax standby mode, you can skip this step.
2
Press [Image Quality].
The LCD display shows the current resolution setting.
3
Press [Image Quality] repeatedly until the resolution you want is displayed ➞ press [OK].
FAX RESOLUTION
4
31/12 2005 SAT 10:00
FINE ➞ FaxOnly
FINE
Continue the operation you wish to complete.
If you do not proceed with any other operation, the LCD display returns to standby mode.
6
Sending Faxes
Adjusting the Exposure (Density)
You can adjust the lightness/darkness of the document pages before you scan for sending.
You can select the scanning density from the following:
• <LIGHT> for documents with dark text or color.
• <STANDARD> for normal printed or written text.
• <DARK> for documents with light text or color.
1
Press [FAX].
If you are already in the Fax standby mode, you can skip this step.
2
Press [Exposure].
The LCD display shows the current exposure setting.
Preparing to Send a Fax
6-5
3
Press [Exposure] repeatedly until the scanning density you want is displayed ➞ press [OK].
DENSITY CONTROL
4
31/12 2005 SAT 10:00
DARK ➞ FaxOnly
STANDARD
Continue the operation you wish to complete.
If you do not proceed with any other operation, the LCD display returns to standby mode.
NOTE
• You can set the scanning density so that the desired scanning density such as STANDARD is automatically
•
returned after the <AUTO CLEAR> function activates or documents are scanned. Since <SCAN DENSITY> of
<FAX DEFAULT> is set to ‘OFF’ in the factory default setting, the scanning density set using [Exposure] will remain
unchanged. (See Chapter 15, “The Menu System.”)
You can set the level of each scanning density (LIGHT/STANDARD/DARK) in the <DENSITY CONTROL> of the
Menu. (See Chapter 15, “The Menu System.”)
Sending Methods
6
Memory Sending
Sending Faxes
To use memory sending, you load the document, dial the fax number ➞ press [Start]. See p. 6-8 for
more details on memory sending.
Since the machine is multitasking, you can even scan a document into the memory while sending a
document, receiving a document, or printing a report.
Manual Sending Via the Handset*
Use manual sending via the handset if you want to speak with the other party before sending a fax to
them. With manual sending via the handset, dial and converse normally, and when they are ready to
receive your fax, press [Start] to begin sending. See p. 6-9 for more details on manual sending via the
handset.
For manual sending via the handset, you need to have the optional handset or a telephone connected
to your machine.
*
6-6
With optional handset or other telephone connected. This feature is available for certain countries only.
Preparing to Send a Fax
Dialing Methods
There are several ways of dialing the number of the party you want to send to:
■ Regular Dialing
Use the numeric buttons to dial the recipient’s fax number.
■ One-Touch Speed Dialing
Press the One-Touch Speed Dial button (01 to 32) under which you have registered the number you want to send
to. See Chapter 5, “Speed Dialing,” for details on registering and using One-Touch Speed Dialing.
■ Coded Speed Dialing
Press [Coded Dial] ➞ enter the two-digit code (00-99)* under which you have registered the number you want to
send to. See Chapter 5, “Speed Dialing,” for details on registering and using Coded Speed Dialing.
*Enter a three-digit code (000 to 167) for the FAX-L390 model.
■ Group Dialing
■ Directory Dialing
Press [Directory] ➞ enter the first letter of the other party’s name and retrieve the number for dialing. See Chapter 5,
“Speed Dialing,” for details on how to use Directory Dialing.
Preparing to Send a Fax
6-7
Sending Faxes
6
Send a document to a pre-defined group of fax numbers. (The numbers must already be stored as One-Touch
Speed Dialing numbers or Coded Speed Dialing numbers.) See Chapter 5, “Speed Dialing,” for details on
registering and using Group Dialing.
Sending Documents
This section describes the different ways to send faxes with the machine.
Memory Sending
You should normally use memory sending to send documents efficiently. If <MEMORY FULL> is
displayed, the machine cannot scan the documents. In this case, wait for the machine to send any
faxes stored in the memory, then scan the documents.
NOTE
You can register a new fax job while the machine is waiting to redial the other party’s number automatically. For
details on how to set the machine to redial automatically, see “Automatic Redialing With Memory Sending,” on
p. 6-11.
Sending Faxes
6
Follow this procedure for memory sending:
1
Load the document in the ADF.
For details on the types of documents you can fax, their requirements, and how to load documents, see
“Document Requirements,” on p. 6-1, and “Loading Documents in the ADF,” on p. 6-3.
2
Press [FAX].
If you are already in the Fax standby mode, you can skip this step.
3
4
Adjust any necessary settings for your document.
• Press [Image Quality] to select the fax resolution. (See “Adjusting the Image Quality (Resolution),” on p. 6-4.)
• Press [Exposure] to select the scan density. (See “Adjusting the Exposure (Density),” on p. 6-5.)
Dial the other party’s fax/telephone number.
For details on the different dialing methods, see “Dialing Methods,” on p. 6-7.
5
Press [Start].
NOTE
To cancel memory sending, press [Stop/Reset]. (See Chapter 11, “System Monitor.”)
6-8
Sending Documents
Manual Sending Via the Handset*
Use manual sending when you want to talk to the other party before sending a document, or if the other
party does not have a fax machine that can receive automatically.
NOTE
You will need to connect a telephone to the machine if you want to talk to the other party before sending a
document.
*
With optional handset or other telephone connected. This feature is available for certain countries only.
Follow this procedure for manual sending:
1
Load the document in the ADF.
For details on the types of documents you can fax, their requirements, and how to load documents, see
“Document Requirements,” on p. 6-1, and “Loading Documents in the ADF,” on p. 6-3.
6
Press [FAX].
If you are already in the Fax standby mode, you can skip this step.
3
Adjust any necessary settings for your document.
• Press [Image Quality] to select the fax resolution. (See “Adjusting the Image Quality (Resolution),” on p. 6-4.)
• Press [Exposure] to select the scan density. (See “Adjusting the Exposure (Density),” on p. 6-5.)
4
Pick up the handset.
5
Dial the other party’s fax/telephone number.
For details on the different dialing methods, see “Dialing Methods,” on p. 6-7.
6
Talk through the handset to the other party.
If you hear a high-pitched signal instead of the other party’s voice, go to step 8.
7
Ask the other party to set their fax machine to receive faxes.
8
When you hear a high-pitched signal, press [Start] ➞ hang up the handset.
NOTE
To cancel manual sending, press [Stop/Reset].
Sending Documents
6-9
Sending Faxes
2
Canceling Sending
Canceling Memory Sending
While Documents Are Being Scanned Using the ADF
1
Press [Stop/Reset].
Scanning is canceled.
2
6
Remove the document from the ADF.
Sending Faxes
For details on how to remove documents, see “Removing Jammed Paper from the ADF,” on p. 13-7.
After All Documents Are Scanned
1
While documents are being sent, press [Stop/Reset].
The machine asks you to confirm that you want to cancel.
CANCEL DURING TX/RX?
< YES
NO >
2
6-10
Press [ (-)] to cancel sending.
• If you change your mind and want to continue sending, press [ (+)] for <NO>.
• The machine prints an ERROR TX REPORT if a transmission report is set to print automatically. (See “1.TX
REPORT,” on p. 15-7.)
Canceling Sending
Redialing
Manual Redialing
To redial the last number dialed with the numeric buttons, press [Redial/Pause].
To cancel manual redialing, press [Stop/Reset] ➞ [ (-)].
Automatic Redialing With Memory Sending
Canceling Automatic Redialing
If you press [Stop/Reset] when waiting to redial, the LCD displays standby mode but you are still in
automatic redialing. To cancel redialing while the machine is waiting to redial, follow the procedure
described in “Deleting a Fax Job,” on p. 11-2. To cancel while the machine is redialing, do the following:
❑ Wait until the machine begins redialing.
❑ Press [Stop/Reset] ➞ [ (-)].
NOTE
The machine can print a list of document stored in memory (DOCUMENT MEMORY LIST), along with the
transaction number of each document. The document waiting to be sent using automatic redialing will be listed as
<TRANSMIT>. To print the list, see “Document Memory List,” on p. 12-11.
Setting Up Automatic Redialing
You can set up the following options for automatic redialing:
• Whether or not the machine redials automatically
• The number of times the machine attempts redialing
• The time interval between redialing attempts
Redialing
6-11
6
Sending Faxes
With memory sending, you can set the machine to automatically dial the fax number again if the
receiving fax machine does not answer or if the line is busy. You can also control how many times the
machine will redial the number and how long it will wait between dialing attempts. See “Setting Up
Automatic Redialing,” on p. 6-11.
Follow the procedure below to adjust the automatic redialing settings.
1
Press [Menu].
2
Press [
(-)] or [
(+)] to select <4.FAX SETTINGS> ➞ press [OK].
3
Press [
(-)] or [
(+)] to select <3.TX SETTINGS> ➞ press [OK].
4
Press [
(-)] or [
(+)] to select <3.AUTO REDIAL> ➞ press [OK].
5
Press [ (-)] or [ (+)] to select <ON> to enable automatic redialing or <OFF> to disable it ➞ press [OK].
• If you selected <ON>: Go to step 6.
• If you selected <OFF>: Go to step 8.
AUTO REDIAL
Sending Faxes
6
6
AUTO REDIAL
1.REDIAL TIMES
Press [OK] again ➞ use [ (-)], [ (+)], or the numeric buttons to enter the number of times you want the
machine to redial ➞ press [OK] twice.
REDIAL TIMES
7
ON ➞
Press [
(-)], [
02TIMES ➞
REDIAL INTERVAL
02MIN.
(+)], or the numeric buttons to select the time interval between redialings ➞ press [OK].
REDIAL INTERVAL
TX SETTINGS
02MIN. ➞ 4.TIME OUT
8
6-12
Press [Stop/Reset] to return to standby mode.
Redialing
Sequential Broadcasting
Sending a Document to More Than One Destination
The machine’s sequential broadcasting feature allows you to send a fax to a sequence of up to 142 fax
numbers (210 fax numbers for the FAX-L390 model), using any combination of dialing methods as
follows:
• One-Touch Speed Dialing: up to 32 destinations
• Coded Speed Dialing: up to 100 destinations (168 destinations for the FAX-L390 model)
• Regular dialing and redialing: 10 destinations
To send a fax to more than one location, do the following:
1
Load the document in the ADF.
For details on the types of documents you can fax, their requirements, and how to load documents, see
“Document Requirements,” on p. 6-1, and “Loading Documents in the ADF,” on p. 6-3.
2
Press [FAX].
If you are already in the Fax standby mode, you can skip this step.
3
Adjust any necessary settings for your document.
• Press [Image Quality] to select the fax resolution. (See “Adjusting the Image Quality (Resolution),” on p. 6-4.)
• Press [Exposure] to select the scan density. (See “Adjusting the Exposure (Density),” on p. 6-5.)
Sequential Broadcasting
6
Sending Faxes
(with the numeric buttons or [Redial/Pause])
You can enter the One-Touch Speed Dialing and Coded Speed Dialing destinations in any order. You
can also include one destination that you dial manually using the numeric buttons or [Redial/Pause].
Be sure to press [OK] after your entry with the numeric keys.
6-13
4
Enter up to 142 destinations (210 destinations for the FAX-L390 model) using any of the following
methods:
● One-Touch Speed Dialing:
❑ Press the desired One-Touch Speed Dial button(s).
● Coded Speed Dialing:
❑ Press [Coded Dial] ➞ enter the two-digit code (00-99)* using the numeric buttons.
*Enter a three-digit code (000 to 167) for the FAX-L390 model.
• Be sure to press [Coded Dial] before each code.
● Directory Dialing:
❑ Press [Directory] ➞ enter the first letter of the name of the party you are searching for.
● Regular Dialing:
❑ Enter the number using the numeric buttons or [Redial/Pause].
• Be sure to press [OK] after your entry with the numeric keys.
NOTE
• If you make a mistake on regular dialing, open One-Touch Speed Dial panel ➞ press [Delete] or [
6
Sending Faxes
•
•
5
(-)] to delete
the last digit, or press [Clear] to delete an entire entry when you use the numeric buttons.
After entering the first One-Touch Speed Dial button or Coded Speed Dialing code, you have 5 seconds to enter
another speed dialing button or code before the machine begins sending automatically. If you have entered more
than one speed dialing button or code, the machine waits for 10 seconds before it begins sending. If you do not
want the machine to send automatically, you need to change the <TIME OUT> setting. See p. 15-9 for more
details.
If you want to review the numbers you entered, use the [ (-)] or [ (+)] to scroll through the numbers.
Press [Start].
The machine then scans the document into memory, and begins sending it to the destinations in numerical order,
starting with the One-Touch Speed Dialing numbers, then the Coded Speed Dialing numbers, and finally the
numbers dialed with the numeric buttons or [Redial/Pause].
NOTE
• If the machine memory becomes full while scanning your document, <MEMORY FULL> appears in the LCD
•
•
display. If this happens, remove the remainder of the document from the Automatic Document Feeder (ADF).Then
divide the document into several sections and send each section separately.
Only one broadcasting job will be active at any given time.
To cancel sending, press [Stop/Reset] ➞ follow the instructions in the LCD display. When you press [Stop/Reset],
sending to all recipients will be canceled. You cannot cancel sending to only one recipient. (See Chapter 11,
“System Monitor.”)
Sending a Document Using Group Dialing
If you frequently send faxes to the same group of people, you can create a “group.” Groups are stored
under One-Touch Speed Dial buttons or Coded Speed Dialing codes. See Chapter 5, “Speed Dialing,”
for details on registering numbers under groups and using Group Dialing.
6-14
Sequential Broadcasting
Delayed Sending
Your machine allows you to scan a document into its memory and send it automatically at a preset
time. By using this feature, you can take advantage of lower long distance rates at night, for example.
You can set up to 142 destinations (210 destinations for the FAX-L390 model) and up to 20
reservations for delayed sending.
1
Load the document in the ADF.
For details on the types of documents you can fax, their requirements, and how to load documents, see
“Document Requirements,” on p. 6-1, and “Loading Documents in the ADF,” on p. 6-3.
2
6
Press [FAX].
3
Adjust any necessary settings for your document.
• Press [Image Quality] to select the fax resolution. (See “Adjusting the Image Quality (Resolution),” on p. 6-4.)
• Press [Exposure] to select the scan density. (See “Adjusting the Exposure (Density),” on p. 6-5.)
4
Open One-Touch Speed Dial panel ➞ press [Delayed Transmission].
5
Use the numeric buttons to enter the time at which you want to send the document ➞ press [OK].
DELAYED TX
TEL=
TX TIME SETTNG 10:00 ➞
Enter the time using the 24-hour clock system. Precede single digits with a zero.
Example:
9:30 a.m. = 09:30
4:30 p.m. = 16:30
Delayed Sending
6-15
Sending Faxes
If you are already in the Fax standby mode, you can skip this step.
6
Enter the destination(s) using any of the following 4 methods.
● One-Touch Speed Dialing:
❑ Press the desired One-Touch Speed Dial button(s).
● Coded Speed Dialing:
❑ Press [Coded Dial] ➞ enter the two-digit code (00-99)* using the numeric buttons.
*Enter a three-digit code (000 to 167) for the FAX-L390 model.
• Be sure to press [Coded Dial] before each code.
● Directory Dialing:
❑ Press [Directory] ➞ enter the first letter of the name of the party you are searching for.
● Regular Dialing:
❑ Enter the number using the numeric buttons or [Redial/Pause].
• You can enter 10 numbers.
• Be sure to press [OK] after your entry with the numeric buttons.
NOTE
If you make a mistake on regular dialing, open One-Touch Speed Dial panel ➞ press [Delete] or [
the last digit, or press [Clear] to delete an entire entry when you use the numeric buttons.
Sending Faxes
6
7
(-)] to delete
Press [Start].
The machine scans the document into memory.
NOTE
• If the machine memory becomes full while scanning your document, <MEMORY FULL> appears in the LCD
display. If this happens, you cannot send the document at a delayed time.
• You can only register one preset sending operation at a time.
• The machine is a multitasking machine, so you can send, receive, print, and copy other documents even when you
have set the machine for delayed sending.
• To print, copy, or send other documents after setting the machine for delayed sending, simply follow the
procedures described in this User’s Guide.
• To cancel a delayed sending, see “Deleting a Fax Job,” on p. 11-2.
• The machine can print a list of document stored in memory (DOCUMENT MEMORY LIST), along with the
transaction number of each document. The document to be sent using delayed sending will be listed as
<DELAYED TX> or <DEL SQ BDCST>. To print the list, see “Document Memory List,” on p. 12-11.
When the set time comes, the machine dials and sends the document.
6-16
Delayed Sending
7
Receiving Faxes
CHAPTER
This chapter describes how to use your machine to receive faxes.
Different Ways to Receive a Fax
The machine provides you with 4 different modes for receiving faxes. To decide which mode will best
suit your requirements, consider how you want to use the machine:
Receive Mode
*
Main Use
Operation
Requirements
FaxOnly*
Fax
Answers all calls as fax calls. It
receives faxes automatically and
disconnects voice calls.
Separate telephone line for fax use
only.
FaxTel
Fax/Tel
Automatically switches between fax
calls and voice calls. Receives faxes
automatically and rings for voice calls.
To set the details see p. 7-2.
Telephone connected to the machine.
Manual
Tel
Rings for every call, whether it is a fax
call or a voice call. For a fax call, you
have to manually activate reception of
the fax.
Telephone connected to the machine.
AnsMode
Fax/Tel
Receives faxes automatically and
routes voice calls to the answering
machine.
Answering machine connected to the
machine.
Factory default setting
You can confirm which receive mode is set by checking the standby display. The receive mode is
displayed in the lower left of the LCD.
Different Ways to Receive a Fax
7-1
Setting the Receive Mode
Set the machine receive mode as follows:
1
Open One-Touch Speed Dial panel ➞ press [Receive Mode].
The LCD display shows the current receive mode setting.
2
If you want to change the receive mode, press [Receive Mode] repeatedly until the mode you want
appears ➞ press [OK].
Each time you press [Receive Mode], the receive mode changes in the following order:
FaxOnly ➞ Manual ➞ AnsMode ➞ FaxTel ➞ FaxOnly ➞ …
Receiving Faxes and Phone Calls Automatically:
FaxTel Mode
Set this mode if you want your machine to automatically switch between voice and fax calls.
7
Receiving Faxes
You can control precisely how your machine handles incoming calls by adjusting the settings below.
Setting the Options for FaxTel Mode
■ RING START TIME
When a call comes in, the machine checks to see if it is a person wishing to speak to you or a fax machine trying to
send a document. If your machine does not have enough time to detect the fax tone, it assumes the call is from a
telephone. Use the <RING START TIME> setting to increase the time the machine takes to check whether a call is
from a fax machine or a telephone. You can select a time between 0 and 30 seconds; the default is 8 seconds.
■ F/T RING TIME
When your machine is set to receive both fax and telephone calls automatically, the telephone rings to alert you to
pick up the handset if the call is from a person. If you do not pick up the handset within a certain amount of time, the
telephone stops ringing. Use this option to change the number of times the machine rings, from 10 to 60 seconds.
The default is 22 seconds.
■ F/T SWITCH ACTION
Not all fax machines are capable of sending a fax tone (the CNG tone that warns the receiving fax machine that a
fax is coming). For those cases the machine may think that the call coming in is a voice call and rings to alert you of
the call (the amount of time it is going to ring is determined by the <F/T RING TIME> setting above). If you do not
answer the call, one of two things can happen:
1. If you set the <F/T SWITCH ACTION> to ‘RECEIVE’, the machine will switch to fax receive mode automatically at
that point and start to receive the document. If no document comes in, it disconnects the call after approx. 40
seconds. The factory default setting is ‘RECEIVE’.
2. If you set the <F/T SWITCH ACTION> to ‘DISCONNECT’, the machine will disconnect the phone call
immediately freeing up your phone line at this point.
7-2
Different Ways to Receive a Fax
What Happens When FaxTel Mode is Selected
Type of call
Telephone
Telephone charges
begin for caller.
Fax
Fax
Sending document
manually
Sending document
automatically
The machine answers without ringing
The machine listens for fax tone
(For 8 sec.)
Fax tone
detected
RING START TIME
(Factory default
setting = 8 sec.)
Document received
automatically
(Fax tone is detected
and the machine
switches to receive
mode.)
Fax tone is not detected
Pick up the
handset to talk
The telephone starts ringing
F/T RING TIME
(Factory default
setting = 22 sec.)
If you donít pick up the handset
(within 22 sec.)
F/T SWITCH ACTION
Choose between:
RECEIVE (factory default setting) and DISCONNECT
DISCONNECT
The machine
disconnects the call.
7
Receiving Faxes
RECEIVE
(Factory default setting)
Not all fax machines are capable of sending a fax
tone. For those cases if you set the <F/T SWITCH
ACTION> to RECEIVE, the machine switches to
receive mode automatically and starts receiving
the document. If no document comes in, it
disconnects after approx. 40 seconds.
Set the FaxTel Mode options as follows:
1
Press [Menu].
2
Press [
(-)] or [
(+)] to select <4.FAX SETTINGS> ➞ press [OK].
3
Press [
(-)] or [
(+)] to select <4.RX SETTINGS> ➞ press [OK].
4
Press [
(-)] or [
(+)] to select <2.FAX/TEL OPT. SET> ➞ press [OK] twice.
5
Press [ (-)] or [
[OK] twice.
(+)] to set the time the machine waits before ringing when it receives a call ➞ press
RING START TIME
08SEC ➞
F/T RING TIME
You can use the numeric buttons instead of using [
022SEC
(-)] or [
(+)] to set the time.
Different Ways to Receive a Fax
7-3
6
Press [ (-)] or [ (+)] to set the time the machine rings while waiting for someone to pick up the handset
➞ press [OK] twice.
F/T RING TIME
030SEC ➞
F/T SWITCH ACTION
RECEIVE
You can use the numeric buttons instead of using [
7
Press [
(-)] or [
(-)] or [
(+)] to set the time.
(+)] to select <RECEIVE> or <DISCONNECT> ➞ press [OK].
F/T SWITCH ACTION
RX SETTINGS
DISCONNECT ➞ 3.INCOMING RING
This setting tells the machine what to do if no one picks up the handset within the specified ring time set in step 6.
8
Press [Stop/Reset] to return to standby mode.
NOTE
The default settings and selectable settings vary depending on the current country selection.
Receiving Faxes Manually: Manual Mode
7
Receiving Faxes
To use this mode, you must have the optional handset or a telephone connected to the machine. In
Manual Mode, the machine rings every time it receives a call, whether the call is from a telephone or a
fax machine.
NOTE
Make sure the <REMOTE RX> setting in the <RX SETTINGS> menu is enabled. See p. 15-11 for details.
If you use your machine with Manual Mode, answer incoming calls as follows:
1
When the optional handset or the telephone rings, pick up the receiver.
● If you hear a person’s voice:
❑ Start your conversation. If the caller wants to send a document after talking to you, ask them to press the start
button on their fax machine. When you hear a beep, press [Start] to begin receiving the document, then hang
up.
● If you hear a slow beep or silence:
❑ A fax machine is trying to send you a document.
Press [Start] on the machine, then hang up.
-orEnter the two-digit ID code from the telephone, then hang up.
7-4
Different Ways to Receive a Fax
• The machine then begins receiving the document. (This is particularly convenient if your telephone is located
away from the machine.)
• If you do not hang up after pressing [Start] or the two-digit ID code, the machine beeps intermittently after you
receive the document. (You can turn the beeping off by disabling the <OFFHOOK ALARM> in the <USER
SETTINGS> menu. See p. 15-7 for details.)
NOTE
If you have an answering machine connected to your machine that can carry out remote-control operations
(controlling your answering machine from a remote telephone), the security code for this function may be the same
as the two-digit ID code described above. If so, make sure you change the machine two-digit ID code to make it
distinct from the answering machine’s security code. See p. 15-11 for details on changing the code (<REMOTE RX
ID> setting).
Receiving Faxes Automatically: FaxOnly Mode
When the machine is set up for a dedicated line, set FaxOnly Mode to automatically receive documents
whenever a call comes over the fax line.
• The machine assumes all incoming calls are from fax machines sending documents. It receives the
documents automatically and disconnects all voice calls.
• In FaxOnly Mode, you can control whether or not the machine rings when it receives a fax call. To set
this option from the machine operation panel, see p. 15-10 (<INCOMING RING> setting).
Using an Answering Machine: AnsMode
Connecting an answering machine to the machine allows you to receive faxes and phone messages
while you are out of the office.
NOTE
Canon does not recommend using an “answering service” (like those offered by local telephone companies that
provide voice mail) on the telephone line you are connecting to the machine. If you do subscribe to an answering
service, you may want to dedicate a separate line for fax communication only and connect that line to the machine.
Using the Machine With an Answering Machine
Follow these guidelines when using the machine with an answering machine:
• Set the answering machine to answer on the first or second ring.
• If the machine runs out of paper or toner in AnsMode, it receives all faxes into memory. The faxes
then print automatically when you add paper or replace the toner cartridge.
• When recording the outgoing message on the answering machine:
- The entire message must be no more than 15 seconds long.
- In the message, tell your callers how to send a fax. For example:
“Hello. I can’t answer the phone right now. If you would like to send a fax, press the start button on your
fax machine. Thank you.”
Different Ways to Receive a Fax
7-5
Receiving Faxes
7
Receiving Faxes in Memory When a Problem
Occurs
The machine will automatically receive incoming faxes into its memory if it encounters a problem that
prevents it from printing normally. The LCD will display <RECEIVED IN MEMORY> and a message
showing the problem. See below the error messages, their cause and the action you need to take to
correct the problem.
NOTE
• The machine memory can store up to approx. 510 A4-size pages*.
• Once the pages are printed, they are deleted from memory.
• If the memory becomes full, you will not be able to receive the remaining pages. Contact the other party and ask
them to resend the remaining pages of the fax.
If the machine receives a document into its memory, the LCD displays one of the following messages.
These messages show the action you must take to correct the problem.
Cause: The toner cartridge ran out of toner or is not installed properly.
7
Receiving Faxes
Action: Make sure the cartridge is installed properly, and install a new one if necessary. See
“Installing/Replacing the Toner Cartridge,” on p. 2-18.
REPLACE CARTRIDGE
Cause: The machine ran out of paper.
Action: Add paper to the paper cassette/the multi-purpose feeder. See “Loading Recording Paper,” on
p. 2-21.
SUPPLY REC. PAPER
Cause: A paper jam occurred.
Action: Clear the jam. See “Clearing Jams,” on p. 13-1.
REC. PAPER JAM
OPEN PRINTER COVER
Cause: Over capacity on the output tray.
Action: Take out sheets from output tray and clear the paper jam. See “Clearing Jams,” on p. 13-1.
Once you have corrected the problem, the machine automatically prints the documents stored in
memory.
*
7-6
Based on Canon FAX Standard Chart No.1, standard mode
Receiving Faxes in Memory When a Problem Occurs
Receiving While Performing Other Tasks
Since the machine is a multitasking device, it can receive faxes and phone calls while you are entering
your user information, making copies, or printing.
If you receive a fax while you are making copies or printing, the machine stores the incoming fax in
memory. Then, as soon as you finish making copies or printing, the machine automatically prints the
fax. If you are entering registration information, the fax is printed as soon as it is received, and does not
go into memory.
Canceling an Incoming Fax
To cancel an incoming fax, follow this procedure:
1
Press [Stop/Reset].
CANCEL DURING TX/RX?
< YES
NO >
7
Press [
(-)] to [Stop/Reset] receiving, or [
(+)] to resume receiving the fax.
Receiving Faxes in Memory When a Problem Occurs
Receiving Faxes
2
7-7
Setting Up and Using Polling
8
CHAPTER
This chapter shows you how to set up and use polling sending and receiving. Polling is useful when the sending party
cannot be in the office at the same time.
What’s Polling?
Polling means a fax calls another fax and requests the other fax to send a document that it is holding.
Unlike normal sending and receiving, in polling the receiver always calls the sender. This is called
polling to receive a document. The sender sends the document in response to the polling by a
telephone call from the receiver.
NOTE
Your fax can be set up to function in both roles. Your fax can poll to receive a document, or it can be polled to send
a document that it is holding.
Before You Use Polling Receiving
Before you try to set up polling, note the following points:
• With one operation you can poll several faxes. You can dial up to 142 telephone numbers (210
telephone numbers for the FAX-L390 model) and poll those faxes to receive documents that they are
holding.
• If the other party is using a Canon fax machine which has the Polling ID function, ask them to set the
Polling ID of their fax machine to 255 (1111 1111 binary number). For details on the Polling ID, see
the other party’s fax machine manual. In all other cases the Polling ID is not a concern.
What’s Polling?
8-1
Polling Other Fax Machines to Receive
Documents
The machine polling feature allows you to request a document to be faxed to you from another fax
machine. The sender only needs to make sure the document is on his fax machine and ready to be
sent: when your machine polls that machine, the document is sent automatically. The machine can poll
any fax machine that supports polling.
Requesting Another Fax to Send a Document
1
Press [FAX].
If you are already in the Fax standby mode, you can skip this step.
8
2
Open One-Touch Speed Dial panel ➞ press [Polling].
3
Use [
(-)] or [
(+)] to select <2.POLLING RX> ➞ press [OK].
Setting Up and Using Polling
POLLING
2.POLLING RX
4
➞
TEL=
Enter the destination(s) using any of the following 4 methods.
● One-Touch Speed Dialing:
❑ Press the desired One-Touch Speed Dial button(s).
● Coded Speed Dialing:
❑ Press [Coded Dial] ➞ enter the two-digit code (00-99)* using the numeric buttons.
*Enter a three-digit code (000 to 167) for the FAX-L390 model.
Be sure to press [Coded Dial] before each code.
● Directory Dialing:
❑ Press [Directory] ➞ enter the first letter of the name of the party you are searching for.
● Regular Dialing:
❑ Enter the number using the numeric buttons or [Redial/Pause].
• You can enter 10 numbers.
• Be sure to press [OK] after your entry with the numeric buttons.
NOTE
If you make a mistake, open One-Touch Speed Dial panel ➞ [Delete] to delete the last number, or press [Clear] to
delete all numbers you entered when you use the numeric buttons.
5
8-2
Press [OK].
Polling Other Fax Machines to Receive Documents
Setting Up Polling Sending
This section shows you how to set up your fax to store and hold a document until it is polled by another
fax to send it.
Setting Up a Polling Box
Before you can use polling sending, you must create a polling box with the <POLLING BOX> of the
Menu. The polling box holds the document in the memory until the other party prompts (polls) your fax
to send the document, or until you delete the document (see p. 8-6).
1
Press [Menu].
2
Press [
3
Press [
(-)] or [
(+)] to select <6.POLLING BOX> ➞ press [OK].
4
Press [
(-)] or [
(+)] to select <1.SETUP FILE> ➞ press [OK].
5
Press [
(-)] or [
(+)] to select <1.FILE NAME> ➞ press [OK].
(+)] to select <4.FAX SETTINGS> ➞ press [OK].
8
Enter a file name for the polling box (up to 24 characters including spaces) using the numeric buttons ➞
press [OK].
:A
CANON TOKYO
➞
SETUP FILE
2.PASSWORD
• For details on how to enter or delete letters, see “Entering Numbers, Letters, and Symbols,” on p. 3-1.
• The message <DATA ENTRY OK> appears on the LCD display for a few seconds.
7
Press [
(-)] or [
(+)] to select <2.PASSWORD> ➞ press [OK].
If you do not want to set a password, go to step 9.
8
Enter a password (up to 7 digits) using the numeric buttons ➞ press [OK].
PASSWORD
1234567 ➞
SETUP FILE
3.ERASE AFTER TX
Setting Up Polling Sending
8-3
Setting Up and Using Polling
6
(-)] or [
NOTE
• This password protects your polling box settings from unauthorized access. To change these settings later, you will
have to enter this password.
• For details on how to enter or delete numbers, see “Entering Numbers, Letters, and Symbols,” on p. 3-1.
9
Press [
(-)] or [
(+)] to select <3.ERASE AFTER TX> ➞ press [OK].
SETUP FILE
3.ERASE AFTER TX
10
ERASE AFTER TX
ON
Press [ (-)] or [ (+)] to select <ON> or <OFF> ➞ press [OK].
- <ON>:The document in the polling box is erased after it is sent in response to a polling request from another
fax machine.
- <OFF>:The document in the polling box is not erased after it is sent. Select this setting if you expect that the
document will be polled by more than one fax machine.
ERASE AFTER TX
11
➞
OFF ➞
POLLING BOX
2.CHANGE DATA
Press [Stop/Reset] to return to standby mode.
Scanning a Document into the Memory for Polling
Sending
Setting Up and Using Polling
8
Follow this procedure to store a document in the polling box. The document remains in the polling box
so that other fax machines can poll it. To use polling sending, you have to previously create a polling
box.
1
Load the document in the ADF.
For details on the types of documents you can fax, their requirements, and how to load documents, see
“Document Requirements,” on p. 6-1, and “Loading Documents in the ADF,” on p. 6-3.
2
Press [FAX].
If you are already in the Fax standby mode, you can skip this step.
3
Adjust any necessary settings for your document.
• Press [Image Quality] to select the fax resolution. (See “Adjusting the Image Quality (Resolution),” on p. 6-4.)
• Press [Exposure] to select the scan density. (See “Adjusting the Exposure (Density),” on p. 6-5.)
4
Open One-Touch Speed Dial panel ➞ press [Polling].
5
Press [OK].
The document is scanned into the polling box.
8-4
Setting Up Polling Sending
Changing the Polling Box Settings
Follow this procedure to change the settings of a polling box.
1
Press [Menu].
2
Press [
(-)] or [
(+)] to select <4.FAX SETTINGS> ➞ press [OK].
3
Press [
(-)] or [
(+)] to select <6.POLLING BOX> ➞ press [OK].
4
Press [
(-)] or [
(+)] to select <2.CHANGE DATA> ➞ press [OK].
5
Enter the password (up to 7 digits) using the numeric buttons ➞ press [OK].
If you have not previously set a password, skip this step, and go to step 6.
CHANGE DATA
PASSWORD
➞
CHANGE DATA
1.FILE NAME
For details on how to enter or delete numbers, see “Entering Numbers, Letters, and Symbols,” on p. 3-1.
8
Press [
(-)] or [
(+)] to display the setting you want to change ➞ press [OK].
To change the settings for an item, follow the same procedure you used for the initial setup of the polling box. (See
“Setting Up a Polling Box,” on p. 8-3.)
NOTE
• To change the password, you have to first enter the old password (it is not displayed as you enter it) ➞ press
[OK] ➞ enter a new password (it is displayed as you enter it) ➞ press [OK].
• If you forget your password, your machine will require service to disable this feature.
7
When you are finished making changes, press [Stop/Reset] to return to standby mode.
Setting Up Polling Sending
8-5
Setting Up and Using Polling
6
Deleting a Polling Box
Follow this procedure to cancel a polling box.
NOTE
You cannot cancel a polling box when the polling box is holding a document for polling sending.
1
Press [Menu].
2
Press [
(-)] or [
(+)] to select <4.FAX SETTINGS> ➞ press [OK].
3
Press [
(-)] or [
(+)] to select <6.POLLING BOX> ➞ press [OK].
4
Press [
(-)] or [
(+)] to select <3.DELETE FILE> ➞ press [OK].
5
Enter the password (up to 7 digits) using the numeric buttons ➞ press [OK].
If you have not previously set a password, skip this step, and go to step 6.
DELETE FILE
PASSWORD
8
➞
DELETE FILE
FILE DELETED
Setting Up and Using Polling
For details on how to enter or delete numbers, see “Entering Numbers, Letters, and Symbols,” on p. 3-1.
The polling box is deleted.
NOTE
If there is any document stored in the polling box, you cannot delete the polling box and the message <CANNOT
DELETE> appears on the LCD display. If you want to delete the polling box, delete the document stored in the
polling box first, then perform the procedure described above. For details on how to delete documents stored in
memory, see “Deleting a Fax Job,” on p. 11-2.
6
8-6
Press [Stop/Reset] to return to standby mode.
Setting Up Polling Sending
Special Features
9
CHAPTER
This chapter describes the special features of the machine.
Special Dialing
This section explains special dialing features, such as dialing through a switchboard and dialing
international numbers.
Dialing Through a Switchboard
A PBX (Private Branch Exchange) is an on-site telephone switchboard. If your machine is connected
through a PBX or other telephone switching system, you have to dial the outside line access number
first, and then dial the number of the party you are calling.
You can register the type of access and the outside line access number under [R], so that you only have
to press [R] before dialing the number you wish to reach. Follow the instructions below to register [R].
Registering the Access Type and Outside Line Access Number
Under the R button
1
Press [Menu].
2
Press [
(-)] or [
(+)] to select <4.FAX SETTINGS> ➞ press [OK] twice.
3
Press [
(-)] or [
(+)] to select <6.R-KEY SETTING> ➞ press [OK].
Special Dialing
9-1
4
Press [
(-)] or [
(+)] to select <PBX> ➞ press [OK].
R-KEY SETTING
5
Press [
(-)] or [
PBX ➞
PBX
HOOKING
(+)] to select the access type of your switching system ➞ press [OK].
■ If you selected <HOOKING>, go to step 8:
If you selected <PREFIX>, go to step 6:
6
Press the numeric buttons to enter the outside line access number.
PREFIX
123456
For details on how to enter or delete numbers, see “Entering Numbers, Letters, and Symbols,” on p. 3-1.
7
Press [Redial/Pause] to enter a pause ➞ press [OK].
PREFIX
123456P ➞
FAX SETTINGS
2.REPORT SETTINGS
NOTE
9
Special Features
If you select <PREFIX>, you can set a number up to 20 digits long, including the “P” at the end.
8
Press [Stop/Reset] to return to standby mode.
Dialing Long Distance
When you register a long distance number, you may have to insert a pause either within or after the
number. For long distance dialing, the location and length of the pause may differ depending on the
telephone system.
How to Enter Pauses
Use this procedure to enter pauses within or at the end of numbers.
1
9-2
During dialing registration, when you come to a step that asks you to enter a number for dialing, use the
numeric buttons to enter the number.
Special Dialing
2
To enter a pause within a number, press [Redial/Pause].
• To enter a pause at the end of a number, press [Redial/Pause] ➞ press [OK].
• A pause entered within a number (p) is 4 seconds long.
• If necessary, you can adjust the length of a pause within a number. See p. 15-8 (<PAUSE TIME> setting) for
more details.
• To make a longer pause within a number, press [Redial/Pause] again. Each pause adds 2 seconds to the length
of the pause.
• A pause at the end of a number (P) is fixed to 10 seconds.
Using Tone Dialing On a Pulse Line
Even if you have a pulse line, the machine enables you to use tone dialing once you have connected to
the number you are calling. This allows you to take advantage of many services that require tones,
such as selecting options from telephone “touch-line” services.
1
Press [FAX].
If you are already in the Fax standby mode, you can skip this step.
2
Lift the handset if you have installed the optional handset.
-orPress [Hook].
The In Use/Memory indicator blinks green and you will hear the dial tone.
Dial the telephone number using the numeric buttons.
Special Features
3
9
The machine connects using the pulses required by your phone line.
4
5
Press [
] to switch to tone dialing.
• When [ ] is pressed, <T> is displayed in the LCD.
• Numbers entered after pressing [ ] will be dialed using tone dialing.
When you have finished, hang up the handset.
-orPress [Hook].
Special Dialing
9-3
Restricting Use of the Machine
If you do not want unauthorized people to be able to make calls, set the <LOCK PHONE> feature to
‘ON’. Calls are restricted when you make calls using the handset or [Hook].
Enabling Restriction of Your Machine
Follow this procedure to enable restriction of your machine.
Special Features
9
1
Press [Menu].
2
Press [
(-)] or [
(+)] to select <4.FAX SETTINGS> ➞ press [OK].
3
Press [
(-)] or [
(+)] to select <7.SYSTEM SETTINGS> ➞ press [OK].
4
Press [
(-)] or [
(+)] to select <3.LOCK PHONE> ➞ press [OK].
5
Press [
(-)] or [
(+)] to select <ON> ➞ press [OK].
LOCK PHONE
6
ON ➞
ADDITIONAL FUNCTIONS
5.ADD. REGISTRATION
Press [Stop/Reset] to return to standby mode.
Restriction of the machine is now enabled. No one can make calls. (This setting does not restrict incoming calls
or faxes.)
9-4
Restricting Use of the Machine
Canceling Restriction of Your Machine
Follow this procedure to cancel restriction of your machine.
1
Follow steps 1 to 4 of “Enabling Restriction of Your Machine,” on p. 9-4.
2
Press [
(-)] or [
(+)] to select <OFF> ➞ press [OK].
LOCK PHONE
ADDITIONAL FUNCTIONS
5.ADD. REGISTRATION
Press [Stop/Reset] to return to standby mode.
Restriction of the machine is now disabled. Anyone can make calls.
9
Special Features
3
OFF ➞
Restricting Use of the Machine
9-5
Using Memory Lock
Normally, a document prints as soon as you receive it. However, there may be occasions when you
want the machine to store all documents in memory until you are ready to print them. Locking the
machine to receive and store all documents in memory is called “Memory Lock.”
You may want to turn Memory Lock ‘ON’ when the machine is left unattended at night, or over long
holidays, to prevent a large volume of printed documents from collecting in the paper output trays. After
you return to the office, you can review the contents of the memory, and enter the memory lock
password to print all of the documents stored in memory.
Turning Memory Lock ON and Setting the Password
After Memory Lock is turned ‘ON’, the machine automatically enters the Memory Lock mode. The
documents received when the machine is in the Memory Lock mode are stored in memory until you
unlock the memory with a password and print them.
Follow this procedure to turn the Memory Lock ‘ON’, and define the password.
Special Features
9
9-6
1
Press [Menu].
2
Press [
(-)] or [
(+)] to select <4.FAX SETTINGS> ➞ press [OK].
3
Press [
(-)] or [
(+)] to select <7.SYSTEM SETTINGS> ➞ press [OK].
4
Press [
(-)] or [
(+)] to select <1.MEMORY LOCK RX> ➞ press [OK].
5
Press [
(-)] or [
(+)] to select <ON> ➞ press [OK].
6
Press [
(-)] or [
(+)] to display the desired Memory Lock setting ➞ press [OK].
Using Memory Lock
The MEMORY LOCK RX menu includes the following items:
Setting
1.MEM LOCK PASSWORD
Description
0 to 9999999
This password protects the Memory Lock
settings.
Setting a password is recommended. You
must use this password to unlock the
memory so you can print documents stored
in memory.
Use the numeric buttons to enter a
password (up to seven digits) ➞ press [OK].
2.REPORT
Sets the machine to print reports. This
setting affects only reports that print
automatically, such as an Activity Report.
OUTPUT NO
No report prints while in the Memory Lock
mode.
OUTPUT YES
A report prints while the machine is in the
Memory Lock mode.
9
7
Special Features
The factory default setting is in bold face.
Press [Stop/Reset] to return to standby mode.
Turning Memory Lock OFF and Printing Documents
Follow this procedure to turn the Memory Lock ‘OFF’ and print the documents received in memory.
1
2
When the Memory Lock mode is ‘ON’, the message <MEMORY LOCK RX> is displayed on the LCD.
Follow the steps 1 to 5 of “Turning Memory Lock ON and Setting the Password” on p. 9-6 to turn the
Memory Lock ‘OFF’.
If you have not set the memory lock password (see step 6 in “Turning Memory Lock ON and Setting the
Password” on p. 9-6), the LCD display shows <2.FAX DEFAULT>. The setting is completed and the documents
received in memory are printed.
3
If a memory lock password has been set, enter the memory lock password using the numeric keys ➞
press [OK].
When you press [OK], all the documents received in memory while the machine was in the Memory Lock mode
are printed. The memory lock mode is deactivated.
If you forget your password, your machine will require service to disable this feature.
Using Memory Lock
9-7
Making Copies
10
CHAPTER
This chapter describes how to make copies with your machine.
Making Copies
One of the machine’s convenient features is its ability to make up to 99 high-quality copies of a
document. To make copies, do the following:
1
Load the document in the ADF.
For details on how to place or load documents, see “Loading Documents in the ADF” on p. 6-3.
2
Press [COPY].
If you are already in the Copy standby mode, you can skip this step.
3
Use the numeric buttons to enter the number of copies.
You can set up to 99 copies.
4
5
Adjust any necessary settings for your document.
• Press [Image Quality] to select the scanning resolution. (See “Adjusting the Image Quality (Resolution),” on
p.10-6.)
• Press [Exposure] to select the scanning exposure. (See “Adjusting the Exposure (Density),” on p.10-6.)
• Press [Enlarge/Reduce] to select the copy ratio. (See “Setting Enlarging/Reducing,” on p.10-4.)
Press [Start].
NOTE
To cancel copying, press [Stop/Reset].
Making Copies
10-1
Specifying the Paper Size and Type
(Common for Cassette and Multi-Purpose
Feeder)
NOTE
• When making copies on A4-size paper after having continuously copied on paper smaller than A4-size paper, the
copies may be dirty. To prevent copies from being dirty, wait about 1 minute before making copies.
• The paper in the multi-purpose feeder is fed prior to the paper in the cassette.
• The settings changed in the Menu do not return automatically to the settings you set previously. Change to the
previous settings again if necessary.
• When making copies of a small size or heavy paper*, etc., the copy speed may be slightly slower than usual.
* The paper type should be selected in the Menu.
• If you intend to make a copy and print with a thermal transfer printer using the same sheet of paper, make the copy
first. Failure to do so may make copies dirty or cause a paper jam.
• When copying onto transparencies, remove each transparency from the output tray as it is output.
Specifying the Paper Size
At the factory, the paper size has already been set to <A4>. Normally, you can make copies in this
setting. When making copies on other sizes of paper, you need to specify the paper size according to
the following.
Making Copies
10
1
Press [Menu].
2
Press [
(-)] or [
(+)] to select <1. PAPER SETTINGS> ➞ press [OK].
3
Press [
(-)] or [
(+)] to select <1. CASSETTE> or <2. MP TRAY> ➞ press [OK].
4
Press [
(-)] or [
(+)] to select <1. PAPER SIZE> ➞ press [OK].
5
Press [ (-)] or [ (+)] to select the appropriate paper size (A4, B5*, A5*, LTR, EXECUTIV* or ENVELOPE*
for the paper cassette, A4, B5, A5, LTR, LGL, EXECUTIV, ENVELOPE or FREESIZE for the multi-purpose
feeder) ➞ press [OK].
*Only for the FAX-L380S model.
● When <ENVELOPE> is selected:
❑ Press [ (-)] or [ (+)] to select the appropriate envelope type (DL, ISO-C5, COM10, or MONARCH) ➞ press
[OK].
10-2
Specifying the Paper Size and Type (Common for Cassette and Multi-Purpose Feeder)
● When <FREE SIZE> is selected:
❑ Press [ (-)] or [ (+)] to select <VERTICAL SIZE> or <HORIZONTAL SIZE> ➞ press [OK].
❑ Use the numeric buttons, or press [ (-)] or [ (+)] to specify vertical and horizontal sizes of the paper in
millimeters (mm).
Available setting range in <VERTICAL SIZE>: 127 mm to 356 mm
Available setting range in <HORIZONTAL SIZE>: 76 mm to 216 mm
❑ Press [OK].
Repeat the steps above to specify both vertical and horizontal sizes of the paper.
6
Press [Stop/Reset] to return to standby mode.
Specifying the Paper Type
<PLAIN PAPER> is selected as the default paper type. When making copies on paper other than plain
paper, you can specify the paper type according to the following. Specifying the paper type can prevent
poor copy quality, or the printout not being printed correctly.
1
Press [Menu].
2
Press [
(-)] or [
(+)] to select <1. PAPER SETTINGS> ➞ press [OK].
3
Press [
(-)] or [
(+)] to select <1. CASSETTE> or <2. MP TRAY> ➞ press [OK].
4
Press [
(-)] or [
(+)] to select <2. PAPER TYPE> ➞ press [OK].
5
Making Copies
10
Press [ (-)] or [ (+)] to select the appropriate paper type (PLAIN PAPER, PLAIN PAPER L, HEAVY
PAPER*, HEAVY PAPER H*, or TRANSPARENCY*) ➞ press [OK].
For the FAX-L390 model, * marked paper types are available only for the multi-purpose feeder.
6
Press [Stop/Reset] to return to standby mode.
Specifying the Paper Size and Type (Common for Cassette and Multi-Purpose Feeder)
10-3
Setting Enlarging/Reducing
You can enlarge or reduce the copy size using preset copy ratios or using custom copy ratios.
Enlarging/Reducing Using Preset Copy Ratios
1
Press [COPY].
If you are already in the Copy standby mode, you can skip this step.
2
Press [Enlarge/Reduce].
PRESET RATIO
100%
3
Press [
(-)] or [
(+)] to select the copy ratio ➞ press [OK].
PRESET RATIO
7 0 % A 4 →A 5
10
+
+
➞
70%
A4
TEXT
01
Making Copies
You can select from the following:
- 200% MAX.
- 141% A5 ➞ A4
- 115% B5 ➞ A4
- 100%
- 86% A4 ➞ B5
- 81% B5 ➞ A5
- 70% A4 ➞ A5
- 50% MIN.
NOTE
• If the <PAPER SIZE GROUP> setting of <COPY SETTINGS> menu in the Menu is set to ‘INCH’ or ‘A’, the preset
•
10-4
copy ratios will be as follows:
INCH: 50%, 64%, 78%, 100%, 129% and 200%;
A: 50%, 70%, 100%, 141% and 200%.
To reset the copy ratio, press [Enlarge/Reduce] several times to display <DIRECT 100%> ratio ➞ press [OK].
Setting Enlarging/Reducing
Enlarging/Reducing Using Custom Copy Ratios
1
Press [COPY].
If you are already in the Copy standby mode, you can skip this step.
Press [Enlarge/Reduce] twice.
ZOOM 50-200%
100%
3
+
Use the numeric buttons to enter the copy ratio ➞ press [OK].
ZOOM 50-200%
80%
+
➞
80%
A4
TEXT
01
• You can enter the copy ratio from 50% to 200%, selectable in 1% increments.
• Even after entering the copy ratio, you can use [ (-)] or [ (+)] to adjust the copy ratio. To increase the copy
ratio, press [
(+)]. To decrease the copy ratio, press [
(-)].
NOTE
To reset the copy ratio, press [Enlarge/Reduce] several times to display <DIRECT 100%> ratio ➞ press [OK].
10
Making Copies
2
Setting Enlarging/Reducing
10-5
Improving Copied Image
Adjusting the Image Quality (Resolution)
You can adjust image quality to the appropriate level best suited for a document with text or photos.
3 modes are available for adjusting the image quality.
1
Press [COPY].
If you are already in the Copy standby mode, you can skip this step.
2
Press [Image Quality] repeatedly until the image quality you want appears.
You can select from the following:
- <TEXT> for text-only documents
- <TEXT/PHOTO> for documents with text and photographs
- <PHOTO> for photographs
NOTE
Copy exposure automatically changes to manual mode when <TEXT/PHOTO> or <PHOTO> is set.
Making Copies
10
Adjusting the Exposure (Density)
You can adjust the copy exposure automatically or manually according to how light or dark your
document is.
Adjusting Automatically
1
Press [COPY].
If you are already in the Copy standby mode, you can skip this step.
2
Press [Exposure] to select the auto mode ➞ press [OK].
DENSITY
AUTO EXPOSURE
➞
100%
A
A4
TEXT
01
The copy exposure is adjusted automatically.
NOTE
Image quality mode automatically changes to <TEXT> when <AUTO EXPOSURE> is set.
10-6
Improving Copied Image
Adjusting Manually
1
Press [COPY].
If you are already in the Copy standby mode, you can skip this step.
2
Press [Exposure] twice to select the manual mode.
3
Press [
(-)] or [
(+)] to adjust the copy exposure ➞ press [OK].
For a lighter copy exposure, press [
(-)].
For a darker copy exposure, press [
(+)].
DENSITY
-LT
DK+ ➞
100%
A4
TEXT
01
NOTE
When setting the exposure lighter, the indicator moves to the left. When setting the exposure darker, the indicator
moves to the right.
Making Copies
10
Improving Copied Image
10-7
Special Features
The machine can perform the Collate Copy and Reserve Copy.
Collate Copy
The collate copy allows you to sort copies in page order. It is convenient when you make multiple
copies of multiple page documents. To use this feature, you need to set <AUTO SORT> to ‘ON’ in the
<COPY SETTINGS> menu. (See p. 15-5.)
Copy 1
1
2
1
3
4
Set 3
sets of copies
2
Copy 2
1
3
2
4
Copy 3
1
3
4
2
3
4
Follow the procedure below to set the Collate Copy function to ‘ON’:
Making Copies
10
1
Press [Menu].
2
Press [
(-)] or [
(+)] to select <3.COPY SETTINGS> ➞ press [OK].
3
Press [
(-)] or [
(+)] to select <5.AUTO SORT> ➞ press [OK].
4
Press [
(-)] or [
(+)] to select <ON> ➞ press [OK].
5
Press [Stop/Reset] to return to standby mode.
The Collate Copy function is set to ‘ON.’ To perform copying, follow the procedure described in “Making Copies,”
on p. 10-1.
10-8
Special Features
Reserve Copy
This feature allows you to reserve the next job while the machine is printing out a current job.
1
Load the document to be reserved in the ADF.
For details on how to load documents, see “Loading Documents in the ADF,” on p. 6-3.
2
Use the numeric buttons to enter the number of copies.
You can set up to 99 copies.
4
Adjust any necessary settings for your document.
• Press [Image Quality] to select the scanning resolution. (See “Adjusting the Image Quality (Resolution),” on
p.10-6.)
• Press [Exposure] to select the scanning exposure. (See “Adjusting the Exposure (Density),” on p. 10-6.)
• Press [Enlarge/Reduce] to select the copy ratio. (See “Setting Enlarging/Reducing,” on p. 10-4.)
Press [Start].
The machine begins scanning.
NOTE
• After printing of the current copy job is complete, the next copy job begins.
• If the memory becomes full while scanning, <MEMORY FULL> appears in the LCD. When the ADF is used for
•
scanning, the document being scanned stops in the ADF.
All of the scanned documents will be erased if <MEMORY FULL> appears, so divide the document and copy each
part separately, or select a lower image quality mode and make copies again.
If the available memory decreases, <PLEASE WAIT> and <MAKING SPACE IN MEM> are displayed alternatively.
If memory space becomes available, the scanning begins again automatically. Also, check that the cassette is not
empty.
Special Features
10-9
10
Making Copies
3
Confirming the Copy Job You Reserved
1
Press [Stop/Reset] while the machine is printing out.
SELECT JOB TO CANCEL
0044
02 30
N O. O F C O P Y
N O. O F D O C U M E N T
R E S E RVAT I O N N O.
: PRINTING
B L A N K : WA I T I N G
: N O PA P E R , PA P E R J A M , E T C .
2
Press [
(-)] or [
(+)] to confirm the reservation number and number of documents.
NOTE
To finish confirming, press [Stop/Reset].
Deleting the Copy Job You Reserved
1
Press [Stop/Reset] while the machine is printing out.
2
Press [
(-)] or [
(+)] to display the job to be deleted ➞ press [OK].
SELECT JOB TO CANCEL
CANCEL COPYING?
➞
0045
01 20
< YES
NO >
Making Copies
10
3
Press [
(-)] for <YES>.
The reserved copy job is deleted.
NOTE
• To cancel deleting the copy job, press [ (+)] for <NO>.
• Once the copy job is deleted, the job can not be restored.
10-10
Special Features
11
System Monitor
CHAPTER
Checking the Status of Copy, Fax, Print and
Report Jobs
Use [System Monitor] to confirm and delete the jobs.
When using [System Monitor], the LCD displays the jobs in the following order in each mode.
In Copy mode,
In Fax mode,
- COPY STATUS
- FAX MONITOR
- FAX MONITOR
- COPY STATUS
- PRINT STATUS
- PRINT STATUS
- REPORT STATUS
- REPORT STATUS
Confirming Transmission Status
Follow the procedure below to confirm the sending or receiving status.
1
Press [System Monitor] repeatedly until <FAX MONITOR> is displayed ➞ press [OK].
FAX MONITOR
1.RX/TX STATUS
➞
16:50 0056 TX
123xxxx
NOTE
• To return to standby mode, press [Stop/Reset].
• If you perform the procedure above when the machine is not sending or receiving faxes, <NO CURRENT RX/TX
JOB> appears, and the display returns to the display shown in step 1.
• The transaction number and <TX/RX> in the LCD mean the following:
- <0001> to <4999>: A sent document (TX)
- <5001> to <9999>: A received document (RX)
Checking the Status of Copy, Fax, Print and Report Jobs
11-1
Confirming Transmission Results and Sending Reservation
Follow the procedure below to confirm the sending or receiving results and sending reservation
(automatic redialing and delayed sending).
1
2
Press [System Monitor] repeatedly until <FAX MONITOR> is displayed.
Press [
(-)] or [
(+)] to select <2.TX/RX RESULT> ➞ press [OK].
The sending result and reservation can be confirmed by checking the sending time, <TX/RX NO.> or fax number.
3
Press [
(-)] or [
(+)] to confirm the sending result and reservation.
15:34 0010 TX STNDBY
[
01]CANON USA
NOTE
• To return to standby mode, press [Stop/Reset].
• If you perform the procedure above when there is no sending reservation and transmission jobs, <NO DOC.
STORED> will appear, and the display will return to the display shown in step 2.
Deleting a Fax Job
Follow the procedure below to delete the documents waiting to be sent by automatic redialing or
delayed sending.
System Monitor
11
1
Press [System Monitor] repeatedly until <FAX MONITOR> is displayed.
2
Press [
3
Use the numeric buttons to enter the transmission number of the fax job you want to delete ➞ press [OK].
(-)] or [
TX RX NO.
(+)] to select <3.DELETE DOCUMENT> ➞ press [OK].
0055 ➞
OK TO DELETE?
< YES
NO >
NOTE
You can check the transmission number of the reserved fax job by printing the DOCUMENT MEMORY LIST. (See
p. 12-11.)
4
If you want to delete the fax job, press [
(-)] for <YES>.
If you change your mind and do not want to delete the fax job, press [
11-2
Checking the Status of Copy, Fax, Print and Report Jobs
(+)] for <NO>.
Confirming and Deleting a Copy Job
1
Press [System Monitor] repeatedly until <COPY STATUS> is displayed.
NOTE
If there is no job, <NO COPY JOBS EXIST> is displayed.
2
Press [
(-)] or [
(+)] to confirm the job number, and the quantity of copies.
COPY STATUS
0003
3
03 02
If you want to delete the copy job, press [OK].
CANCEL COPYING?
< YES
NO >
4
If you decide to delete the job, press [
(-)] for <YES>.
NOTE
To cancel deleting the job, press [ (+)] for <NO>.
Once the job is deleted, the job cannot be restored.
Confirming and Deleting a Print Job
11
Press [System Monitor] three times.
System Monitor
1
NOTE
If there is no job, <NO PRINT JOBS EXIST> is displayed.
2
Press [
(-)] or [
(+)] to confirm the file name.
PRINT STATUS
------------FILE NAME
3
If you want to delete the print job, press [OK].
CANCEL PRINTING?
< YES
NO >
Checking the Status of Copy, Fax, Print and Report Jobs
11-3
4
If you decide to delete the print job, press [
(-)] for <YES>.
NOTE
• To cancel deleting the job, press [ (+)] for <NO>. Once the job is deleted, the job cannot be restored.
• The LCD can display characters in ASCII cord. Using characters other than those in ASCII cord may have the LCD
display garbled characters.
Confirming and Deleting a Report Job
1
Press [System Monitor] four times.
NOTE
If there is no job, <NO REPORT JOBS EXIST> is displayed.
2
If there is one report job and if you want to delete it, press [OK].
CANCEL REPORT?
< YES
NO >
3
If you decide to delete the job, press [
4
If there are multiple report jobs, press [
(-)] for <YES>.
(-)] or [
(+)] to select the job you want to delete.
REPORT STATUS
02 USER DATA LIST
11
System Monitor
5
Press [OK].
CANCEL REPORT?
< YES
NO >
6
If you decide to delete the job, press [
(-)] for <YES>.
NOTE
To cancel deleting the job, press [
11-4
(+)] for <NO>. Once the job is deleted, the job cannot be restored.
Checking the Status of Copy, Fax, Print and Report Jobs
12
Reports and Lists
CHAPTER
This chapter describes how to print reports and lists.
Activity Report
The Activity Report is printed out automatically by the machine after every 20 transactions. This report
lists the details of the documents you have sent or received so that you can keep track of the
transaction operations your machine has performed.
• Machine prints sending and receiving transactions together in the same report.
• When sending a document to many locations (Broadcast), the transaction number will be the same
for each transmission in the group.
You can also print the Activity Report manually if you want to check the report before the 20
transactions are completed. Follow this procedure to print the Activity Report.
1
2
Press [FAX].
If you are already in the Fax standby mode, you can skip this step.
Open One-Touch Speed Dial panel ➞ press [Report].
REPORT
1.ACTIVITY REPORT
3
Press [OK].
The machine prints the ACTIVITY REPORT and the LCD returns to standby mode.
31/12 2005
0 9 : 5 8 FA X 1 2 3 x x x x
W O R L D E S TAT E , I N C .
001
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
❉❉❉
ACTIVITY REPORT
❉❉❉
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
ST. TIME
❉12/31
❉12/31
❉12/31
12/31
DESTINATION TEL/ID
NO .
MODE
08:28 ADAM BOOK.CPA
08:49 BELZER.INC.
732 2233
1 213 978 3314
09:08 R.LOUIS
1 213 978 3314
0008 TRANSMIT
09:34 ADAM BOOK.CPA
732 2233
3333
0009 TRANSMIT
IF MARKED WITH AN ❉
IT ALREADY HAS BEEN PRINTED OUT.
0007 TRANSMIT
5005 AUTO RX
PGS .
ECM
ECM
RESULT
1 OK
00'06
1 NG 00'20
1 STOP
2 NG 00'00
0 #0995
1 OK
00'18
ERROR CODE
TRANSACTION NUMBER
Activity Report
12-1
Transmission (TX) Reports
The machine normally prints a report only when an error occurs during sending (ERROR TX
REPORT). However, you can set the machine to print a report every time you send a document (TX
REPORT).
If you send a document using memory, you can also select whether the first page of the document is
printed with the report. See “1.TX REPORT” in the <REPORT SETTINGS> menu on p. 15-7 for details
on setting these options.
ST. TIME
Represents the time the last attempt was made to transmit a document.
TIME USE
Represents the amount of time it took during the last attempt to transmit. Please note that
the usage time does not reflect the total usage time used to transmit all pages of the
document when “retry” occurs. By printing an ACTIVITY REPORT and matching the
transaction number of the TX REPORT with a transaction number in the ACTIVITY
REPORT you can find out exactly how many attempts were made to send the document,
how many pages were sent in each attempt as well as the usage time for each attempt.
PAGES SENT
Represents the number of pages that were successfully transmitted.
RESULT
OK means that all pages were transmitted either during the first attempt or after the first
or second retry.
NG means that either some or no pages were transmitted after 2 retries.
Error TX Report
12
Reports and Lists
31/12 2005
10:32
FAX
123xxxx
WORLD ESTATE,INC.
001
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
❉❉❉
ERROR TX REPORT
❉❉❉
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
TX FUNCTION WAS NOT COMPLETED
TX/RX NO
DESTINATION TEL #
DESTINATION ID
ST. TIME
TIME USE
PAGES SENT
RESULT
12-2
Transmission (TX) Reports
0006
1 213 978 3314
JOHN BARRISTER
31/12 10:30
00’00
0
NG
STOP
TX Report
31/12 2005
0 9 : 4 9 FA X 1 2 3 x x x x
WORLD ESTATE,INC.
001
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
❉❉❉
TX REPORT
❉❉❉
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
TRANSMISSION OK
TX/RX NO
DESTINATION TEL #
DESTINATION ID
ST. TIME
TIME USE
PAGES SENT
RESULT
WHEN YOU
SET THE FAX
TO PRINT
THE FIRST
PAGE OF THE
DOCUMENT
0006
20 545 8545
JOHN BARRISTER
31/12 09:48
00’16
1
OK
THE SLEREXE COMPANY LIMITED
SAPORS LANE•BOOLE•DORSET•BH25 8ER
TELEPHONE BOOLE (945 13) 51617 – FAX 123456
Our Ref. 350/PJC/EAC
December 27, 2005
Dr. P. N. Cundall,
Mining Surveys Ltd.,
Holroyd Road,
Reading,
Berks.
Multi TX/RX Report
If you used sequential broadcasting to send a document, the MULTI TX/RX REPORT is printed.
09:58
FA X 1 2 3 x x x x
WORLD ESTATE,INC.
12
001
Reports and Lists
31/12 2005
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
❉❉❉
MULTI TX/RX REPORT
❉❉❉
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
TX/RX NO
PGS.
TX/RX INCOMPLETE
0013
1
_____
TRANSACTION OK
[
[
ERROR INFORMATION
01]732 2233
03]1 914 438 3619
JOHN BARRISTER
SEYMOUR GREEN
_____
If you set your machine to print activity reports (TX REPORT or RX REPORT) and then use sequential
broadcasting or polling reception with multiple parties, multi-activity report will be printed instead of the
activity report (Sending or Receiving). See <REPORT SETTINGS>, on p. 15-7.
Transmission (TX) Reports
12-3
Reception (RX) Report
Normally the machine does not print a reception report (RX REPORT) unless you set it to do so.
You can set the machine to print the RX REPORT every time you receive a document or only if an error
occurs during receiving. See p. 15-8 for details on setting this option.
31/12 2005
0 9 : 5 8 FA X 1 2 3 x x x x
WORLD ESTATE,INC.
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
❉❉❉
RX REPORT
❉❉❉
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
RECEPTION OK
TX/RX NO
DESTINATION TEL #
DESTINATION ID
ST. TIME
TIME USE
PGS.
RESULT
Reports and Lists
12
12-4
Reception (RX) Report
5008
1 213 978 3314
31/12 09:07
00’17
1
OK
001
Memory Clear Report
If you experience a power failure, all documents stored in memory can be saved for up to approx. 1
hour. If power is not restored to the fax within 1 hour, the documents in memory will be lost. If this time
limit has elapsed before power is restored to the fax, as soon as power is restored a list of documents
deleted from the memory as a result of the power failure is printed automatically.
31/12 2005
10:32
FAX
123xxxx
WORLD ESTATE,INC.
001
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
❉❉❉
❉❉❉
MEMORY CLEAR REPORT
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
MEMORY FILES DELETED
TX/RX NO
0001
0002
MODE
DELAYED TX
TRANSMIT
DESTINATION TEL/ID
[
[
01] ADAM BOOKS.CPA
02] JOHN BARRISTER
PGS.
1
3
SET TIME
30/12 10:07
30/12 10:26
ST. TIME
23:30
NOTE
If there are one or more documents in the image memory when the power is cut off, the machine will print the
Memory Clear Report when the power is restored unless the machine is running out of paper or toner.
Reports and Lists
12
Memory Clear Report
12-5
Speed Dialing Lists
Your machine can print speed dialing lists. These lists allow you to review the numbers and names
registered under One-Touch Speed Dial buttons and Coded Speed Dialing codes (including Group
Dialing numbers).
Follow this procedure to print the lists.
1
Press [Menu].
2
Press [
(-)] or [
(+)] to select <9.PRINT LISTS> ➞ press [OK].
3
Press [
(-)] or [
(+)] to select <2.SPEED DIAL LIST> ➞ press [OK].
4
Press [
(-)] or [
(+)] to select the list you want to print ➞ press [OK].
You can select from the following:
- <1-TOUCH LIST>
- <CODED DIAL LIST>
- <GROUP DIAL LIST>
If you selected <1-TOUCH LIST> or <CODED DIAL LIST>, press [ (-)] or [
SORT> depending on what order you want the destinations to be printed:
(+)] to select <SORT> or <NO
Select <1.NO SORT> to print the list in key number order ➞ press [OK].
-or-
12
Select <2.SORT> to print the list with the names of the destinations in alphabetical order ➞ press [OK].
Reports and Lists
The machine prints the list and the LCD returns to standby mode.
NOTE
You can also print the list using [Report]. Open One-Touch Speed Dial panel ➞ press [Report] ➞ select <2.
SPEED DIAL LIST> ➞ press [ (-)] or [ (+)] to select a report you want to print out ➞ press [OK].
12-6
Speed Dialing Lists
One-Touch Speed Dial List
31/12 2005 10:32
FA X
123xxxx
WORLD ESTATE,INC.
001
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
❉❉❉
1-TOUCH LIST
❉❉❉
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
NOT SORTED
NO.
[
[
[
[
[
01]
02]
03]
06]
08]
DESTINATION TEL #
DESTINATION ID
1 914 438 3619
722 2655
1 516 911 4411
761 1298
732 2233
31/12 2005 10:32
FA X
SEYMOUR GREEN
ROBERT STUART
NATALIE SMITH
JOHN BARRISTER
ADAM BOOKS.CPA
123xxxx
WORLD ESTATE,INC.
001
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
❉❉❉
1-TOUCH LIST
❉❉❉
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
NO.
[
[
[
[
[
08]
06]
03]
02]
01]
DESTINATION TEL #
732 2233
761 1298
1 516 911 4411
722 2655
1 914 438 3619
DESTINATION ID
ADAM BOOKS.CPA
JOHN BARRISTER
NATALIE SMITH
ROBERT STUART
SEYMOUR GREEN
12
Reports and Lists
SORTED
Speed Dialing Lists
12-7
Coded Speed Dial List
FAX-L380S
31/12 2005 10:32
FA X
123xxxx
WORLD ESTATE,INC.
001
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
❉❉❉
CODED DIAL LIST
❉❉❉
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
NOT SORTED
NO.
[❉
[❉
[❉
[❉
[❉
DESTINATION TEL #
01]
02]
03]
04]
08]
DESTINATION ID
555 1234
1 914 438 3619
1 516 911 4411
1 617222322
732 2233
31/12 2005 10:32
FA X
BILL
SEYMOUR GREEN
NATALIE SMITH
HUNT INVESTMENTS
ADAM BOOKS.CPA
123xxxx
WORLD ESTATE,INC.
001
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
❉❉❉
CODED DIAL LIST
❉❉❉
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
SORTED
NO.
[❉
[❉
[❉
[❉
[❉
DESTINATION TEL #
08]
01]
04]
03]
02]
DESTINATION ID
732 2233
555 1234
1 617222322
1 516 911 4411
1 914 438 3619
ADAM BOOKS.CPA
BILL
HUNT INVESTMENTS
NATALIE SMITH
SEYMOUR GREEN
FAX-L390
31/12 2005 10:32
FAX
123xxxx
12
Reports and Lists
WORLD ESTATE,INC.
001
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
❉❉❉
CODED DIAL LIST
❉❉❉
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
NOT SORTED
NO.
[❉
[❉
[❉
[❉
[❉
DESTINATION TEL #
001]
002]
003]
004]
008]
DESTINATION ID
555 1234
1 914 438 3619
1 516 911 4411
1 617222322
732 2233
31/12 2005 10:32
FAX
BILL
SEYMOUR GREEN
NATALIE SMITH
HUNT INVESTMENTS
ADAM BOOKS.CPA
123xxxx
WORLD ESTATE,INC.
001
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
❉❉❉
CODED DIAL LIST
❉❉❉
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
SORTED
NO.
[❉
[❉
[❉
[❉
[❉
12-8
DESTINATION TEL #
008]
001]
004]
003]
002]
Speed Dialing Lists
732 2233
555 1234
1 617222322
1 516 911 4411
1 914 438 3619
DESTINATION ID
ADAM BOOKS.CPA
BILL
HUNT INVESTMENTS
NATALIE SMITH
SEYMOUR GREEN
Group Dial List
FAX-L380S
31/12 2005
13:36
FAX
123xxxx
WORLD ESTATE,INC.
001
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
❉❉❉
GROUP DIAL TEL # LIST
❉❉❉
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
[
05]
[❉
[❉
[
[
CANON GROUP
01]
10]
01]
02]
225
233
876
613
7823
7766
2398
9076
CANON
CANON
CANON
CANON
NY
CA
TX
CA
FAX-L390
31/12 2005
13:36
FAX
123xxxx
WORLD ESTATE,INC.
001
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
❉❉❉
GROUP DIAL TEL # LIST
❉❉❉
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
05]
CANON GROUP
[ ❉ 001] 225 7823
[ ❉ 010] 233 7766
[
01] 876 2398
[
02] 613 9076
CANON
CANON
CANON
CANON
NY
CA
TX
CA
12
Reports and Lists
[
Speed Dialing Lists
12-9
User’s Data List
You can print a list of the data registered in your machine. This list is useful when you want to review
the user data information you may have entered (such as your name and number, the date and time)
and all other settings currently selected.
Follow this procedure to print the USER’S DATA LIST.
1
2
Press [Menu].
Press [
(-)] or [
(+)] to select <9. PRINT LISTS> ➞ press [OK] twice.
The machine prints the USER’S DATA LIST and the LCD returns to standby mode.
NOTE
• The LCD returns to standby mode and the USER’S DATA LIST is printed.
• You can also print the USER’S DATA LIST using [Report]. Open One-Touch Speed Dial panel ➞ press [Report] ➞
press [
31/12 2005
(+)] to select <1.USER DATA> ➞ press [OK].
(-)] or [
13:36
FAX
123xxxx
WORLD ESTATE,INC.
001
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
❉❉❉
USER'S DATA LIST
❉❉❉
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
12
Reports and Lists
1.PAPER SETTINGS
CASSETTE
PAPER SIZE
PAPER TYPE
MP TRAY
PAPER SIZE
A4
PLAIN PAPER
A4
SCANNING C
ENERGY SAVER
ENERGY SVR TIME
DATE SETUP
SUMMER TIME
START DATE/TIME
MONTH
WEEK
DAY
TIME
END DATE/TIME
MONTH
WEEK
DAY
TIME
TOTAL MEMORY
12-10
User’s Data List
ON
5MIN.
DD/MM YYYY
ON
APRIL
FIRST WEEK
SUNDAY
02:00
SEPTEMBER
LAST WEEK
SATURDAY
02:00
4.080MB
Document Memory List
The machine can print a list of documents stored in memory, along with the transaction number (TX/
RX NO.) of each document.
1
Press [FAX].
If you are already in the Fax standby mode, you can skip this step.
2
Open One-Touch Speed Dial panel ➞ press [Report].
Press [
(-)] or [
(+)] to select <4.DOC. MEMORY LIST> ➞ press [OK].
The machine prints the DOCUMENT MEMORY LIST and the LCD returns to standby mode.
NOTE
Once you know the transaction number of a document stored in memory, you can delete it. (See “Deleting a Fax
Job,” on p. 11-2.)
\
31/12 2005
17:15
FAX
123xxxx
WORLD ESTATE,INC.
001
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
❉❉❉
DOCUMENT MEMORY LIST
❉❉❉
❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉❉
0046
0047
MODE
DELAYED TX
TRANSMIT
DESTINATION TEL/ID
[
[
01] Canon TOKYO
02] Canon ITALIA
PGS.
1
3
SET TIME
31/12 10:07
31/12 10:26
ST. TIME
12
23:30
Reports and Lists
TX/RX NO
Document Memory List
12-11
Cancel Report Printing
You can cancel report printing using the CANCEL REPORT item from the REPORT menu.
1
Press [Menu].
2
Press [
(-)] or [
(+)] to select <9.PRINT LISTS> ➞ press [OK].
3
Press [
(-)] or [
(+)] to select <4.CANCEL REPORT> ➞ press [OK].
Press [
(-)] or [
(+)] to select <YES> ➞ press [OK].
4
Printing is canceled.
If you do not want to cancel the report, press [
(-)] or [
(+)] to select <NO> ➞ press [OK].
● If there are multiple jobs:
❑ Press [ (-)] or [ (+)] to select the report you want to cancel ➞ press [OK].
❑ Press [ (-)] or [ (+)] to select <YES> ➞ press [OK].
NOTE
If you want to cancel multiple jobs, select one job at a time, and cancel them one by one.
Reports and Lists
12
12-12
Cancel Report Printing
Troubleshooting
13
CHAPTER
This chapter describes the problems you might encounter when using the machine and their remedies. It also
explains what to do if you cannot solve the problem by yourself.
Clearing Jams
This section describes how to remove jammed paper.
Removing Jammed Paper from Inside the Machine
When print media jams inside the machine, the LCD displays <REC. PAPER JAM> and <OPEN
PRINTER COVER>.
CAUTION
There are some areas inside the machine and cartridge which are subject to high voltages and high
temperatures. Take adequate precaution when performing internal inspections to avoid burns or
electrical shock.
NOTE
When removing jammed paper from inside the machine, take care not to allow the toner on the jammed paper to
come into contact with your hands or clothing. If they become dirty, wash them immediately with cold water.
Washing with warm water will set the toner, and make it impossible to remove the toner stains.
Clearing Jams
13-1
1
Open the printer cover. If there is any paper left in the cassette or on the output tray, remove it first.
2
Remove the cartridge.
IMPORTANT
• Remove watches and any bracelets or rings when touching the inside of the machine. These items might be
damaged if they come into contact with the parts inside the machine.
• When removing the jammed paper, do not touch the transfer roller (shaded part) as its surface is very delicate and
susceptible to finger oil and scratches, which may lead to print deterioration.
13
Troubleshooting
• To avoid possible damage to the printer, do not touch the pins near the left end of the transfer roller.
PINS
TRANSFER ROLLER
NOTE
Do not expose the cartridge to light for more than 5 minutes. If necessary, put the cartridge in its original protective
bag or wrap it with a thick cloth to prevent exposure to light.
13-2
Clearing Jams
4
5
Open the rear cover and push down the green paper release levers on both sides of the face up paper
output.
Hold both sides of the jammed paper and carefully move it inward, then gently pull it out.
Roll the leading end of the paper outwards so that the printed surface is on the inside of the roll, then
gently pull the rolled up paper out of the machine.
13
Troubleshooting
3
Clearing Jams
13-3
6
If the leading edge of the paper is visible but has not entered the imaging area (marked with yellow label),
pull the paper forwards and roll it inwards.
If the leading edge of the paper has already entered the imaging area, gently pull out the paper at the face up
paper output rollers until the edge of the paper appears.
IMPORTANT
• Do not pull the jammed paper forward from the cassette. It may cause a malfunction.
• Do not pull the jammed paper upward; the toner on the paper will stain the printer and cause a permanent
reduction in print quality.
Troubleshooting
13
13-4
Clearing Jams
7
8
Gently pull the jammed paper between the output rollers until the leading edge emerges from the
machine.
Carefully pull the jammed paper straight out through the rollers.
If the jammed paper is badly folded, similar to the folds of an accordion, ease the jammed paper loose and then
pull it out of the machine.
Push the paper release levers back to their original position and close the rear cover.
13
Troubleshooting
9
IMPORTANT
• Be sure to push the paper release levers back to their original position. If the levers are left pushed down, the
paper jam error will not be resolved.
• Never push down the paper release levers while printing. This could result in damage to the fixing assembly.
Clearing Jams
13-5
10
Insert the cartridge back into the machine, then close the printer cover.
For details, see “Installing/Replacing the Toner Cartridge,” on p. 2-18.
IMPORTANT
After you replace the cartridge and close the printer cover, the machine should be ready for operating. If the
machine returns to the ready state for operating, troubleshooting has been successful. If the machine does not
return to the ready state for operating, confirm that the paper release levers are pushed back to their original
position, and check to see that jammed paper is not left in the machine.
• If paper jam occurs when using the cassette:
1
Pull out the cassette completely.
2
Hold both sides of the jammed paper and pull it out from the machine at a downward angle.
3
Insert the cassette to the machine.
4
Open and close the printer cover to clear the error message and reset the machine.
• If paper jam occurs when using the multi-purpose feeder:
1
Hold both sides of the jammed paper and pull it out from the multi-purpose feeder.
2
Open and close the printer cover to clear the error message and reset the machine.
Troubleshooting
13
13-6
Clearing Jams
Removing Jammed Paper from the ADF
When the document jams in the ADF, the LCD displays <CHECK DOCUMENT>.
Widen the slide guides until they stop, and remove the paper so as not to be caught by the slide guides.
Open the ADF and gently remove the jammed paper from the ADF.
NOTE
After removing jammed paper, even edges of the document before loading it in the ADF again.
13
Troubleshooting
1
Clearing Jams
13-7
LCD Messages
The following messages are displayed in the LCD when the machine performs a function or if it
encounters an error.
Message
CHANGE PAPERSIZE
CHECK DOCUMENT
CHECK PRINTER
DOCUMENT TOO LONG
Troubleshooting
13
HANG UP PHONE
INCORRECT PAPER SIZE
INSTALL CARTRIDGE
13-8
LCD Messages
Cause
Action
When the machine prints the reports or
Set the paper size setting to <LTR>, or
lists, the paper size setting is set to a size <A4> and load paper of the same size.
other than <LTR>, or <A4>.
For the TX report or RX report, the
machine automatically prints the reports
or lists which was stored in the memory.
There is a paper jam in the ADF.
Remove the document in the ADF.
(See p. 13-7.)
Make sure that the document is not too
long or too short. (See p. 6-1.)
Then reset the machine by opening the
printer cover and then closing it.
The ADF roller rotates without feeding
Fan the edge that will feed into the
documents.
machine first, then tap the edge of
multiple page documents on a flat surface
to even the stack.
The document has stopped in the ADF
Remove the document in the ADF.
because you pressed [Stop/Reset] while (See p. 13-7.)
scanning.
An abnormality has occurred in the
Reset the machine by opening the printer
printer.
cover and then closing it. If the message
remains, unplug the machine from the
power supply and call your service
representative.
The document is longer than 356 mm for
multi-page document, 1 m for one-page
document, or is not feeding correctly.
There is a paper jam in the ADF.
The handset is not placed in the handset
cradle correctly.
The size of the paper in the cassette or
multi-purpose feeder is different from that
of the paper specified in the <PAPER
SIZE> setting of the Menu.
The cartridge is not installed or not
installed correctly.
Reduce the length of the document to
within 356 mm or 1 m.
Remove the document you are trying to
copy in the ADF. (See p. 13-7.)
Make sure that the document is not too
long or too short. (See p. 6-1.)
Then reset the machine by opening the
printer cover and then closing it.
Replace the handset correctly.
Load the correct paper size or change the
<PAPER SIZE> setting of the Menu. (See
p. 15-2.)
Then reset the machine by opening the
printer cover and then closing it.
Install the cartridge correctly.
(See p. 2-18.)
MEMORY FULL
NOT REGISTERED
PRINTER DATA ERROR
REC. PAPER JAM
RECEIVED IN MEMORY
REMOVE MP PAPER
REPLACE CARTRIDGE
SCANNING
MAKING SPACE IN MEM
PLEASE WAIT
START AGAIN
SUPPLY REC. PAPER
CASSETTE
Cause
Shows the percentage of memory
currently in use. This message is
displayed when you set the document in
ADF.
The memory is full because collate copy
was set when a large document is loaded.
The One-Touch Speed Dial button or
Coded Speed dialing code you entered
has not been registered.
Abnormality has occurred in the data
transmission between the machine and
computer.
Action
Wait for the machine to send any faxes in
memory. Also, print or delete any
documents in memory you no longer
need.
Divide the document and copy each part
separately.
Register the One-Touch Speed Dial
button or Coded Speed Dialing code.
(See pages 5-2 and 5-5.)
Use [System Monitor] to delete the
current print job or the final print job (If
multiple jobs are being printed). Then you
can shift to the next job. If you use
<PRINTER RESET> of the Menu, all the
print jobs are deleted. (See p.15-15.)
There is a paper jam.
Clear the paper jam (See pages 13-1 to
13-7.) and reload paper in the cassette or
multi-purpose feeder. Then reset the
machine by opening the printer cover and
then closing it.
The machine received the fax in memory Load correct paper size in the cassette,
because paper or toner ran out, a paper replace the cartridge, or clear the paper
jam occurred, or incorrect paper size was jam. (See p.7-6.)
loaded.
Paper is loaded in the multi-purpose
Remove the paper from the multi-purpose
feeder when the machine receives a fax
feeder. If the machine receives the fax
or prints a report or list.
then paper is loaded in the multi-purpose
feeder, the received document will be
stored in memory.
The toner cartridge ran out of toner or is Make sure the toner in the cartridge is
not installed properly.
evenly distributed or the cartridge is
installed properly.
After doing this, if the message remains
displayed or the print quality is low,
replace the cartridge. (See p. 2-18.)
Memory is getting low during scanning
When memory space becomes available
because the document has many
as printing continues, the scanning
graphics or photos.
resumes automatically.
Then reset the machine by opening the
printer cover and then closing it.
The paper in the cassette has run out, the After loading paper in the cassette,
toner has run out, paper jams have
replacing the cartridge, clearing jams, or
occurred, or the paper size setting is
specifying the correct paper size, print the
wrong while the report is printing.
report again.
No paper is loaded in the cassette.
Load paper in the cassette. (See p. 2-21 to
2-23.) Make sure the paper stack in the
cassette does not exceed the capacity of the
cassette.
If you load paper while making copies, do
not load a different paper size.
LCD Messages
13-9
13
Troubleshooting
Message
MEM IN USE nn %
Message
SYSTEM ERROR
Exxx*
Cause
An error of some kind has occurred
in the machine.
TX/RX NO. nnnn**
When the machine sends or receives a
fax, it assigns a unique identification
number (nnnn).
Action
Unplug the machine from the power
supply and wait for approx. 3 minutes to 5
minutes, then plug it in again. If this does
not solve the problem, unplug the
machine and call your service
representative.
Write down the number for future
reference.
* xxx stands for a number.
** The identification number does not appear in the standby mode. It appears when scanning documents, operating
[System Monitor], receiving faxes in Manual mode or memory, or after transmission is completed.
Troubleshooting
13
13-10
LCD Messages
Error Codes
Errors in reports are recorded as error code numbers because there is not enough space to print a
detailed description of the error in the report. When errors are recorded in reports, note the error code
number, and check it against the table below to learn more about what caused the error and how to
remedy it.
#0005
#0009
#0011
#0012
#0018
#0022
#0034
#0037
#0995
Cause
There may be a document jam.
A document longer than 30 cm is being
sent from the feeder.
Data is too large and taking too long to
send a document.
It’s taking too long to receive a page.
The other fax machine did not respond
within 35 seconds.
The other party may not be using a G3
fax machine.
Action
Clear the jam.
Divide the document into pages and resend from the platen
glass.
Reduce the scan resolution and resend.
Contact the other party and have them reduce the scan resolution
or split the document into segments and resend.
Send the document again. Contact the other party and have them
check their fax machine. If you are making an overseas call, add
a pause to the number.
Check with the other party and send the document to a G3 fax
machine. If the other party does not have a G3 fax machine, try
sending your document using a transmission mode the other
party’s fax machine supports.
No paper is loaded in the cassette or the
cassette is not set properly.
If you are polling a fax machine to receive
a document, the other party has not set
the document correctly on the machine.
The other fax machine has run out of
paper and its memory is full.
The other fax did not respond to redialing.
The document was not sent because the
other fax machine was busy and did not
respond within 55 seconds.
The settings for the one-touch speed
dialing keys or coded speed dialing codes
you are using to dial the other party have
been deleted.
You sent a confidential document to
another fax machine, but it was rejected.
The memory is full.
A waiting fax job has been canceled.
Load paper in the cassette or set the cassette properly.
Contact the other party and request that the document be set
correctly for polling on their machine.
Contact the other party and tell them to refill the paper cassette.
Wait for a while and try again. If you still cannot send the
document, contact the other party and have them check if their
fax machine is turned on. If the line is busy, wait more and try
again.
Reset the one-touch or coded speed dialing settings.
Contact the other party and confirm the settings of the other
party’s confidential mailbox.
Print out the faxes received in the memory.
Resend the fax if needed.
Error Codes
13
Troubleshooting
Numbers
#0001
#0003
13-11
Paper Feeding Problems
Paper does not feed correctly.
Q
Does the cassette or multi-purpose feeder contain an appropriate quantity of sheets?
A
Make sure the paper stack in the cassette or the paper in the multi-purpose feeder does not exceed
the capacity of the cassette or multi-purpose feeder. (See “Loading Paper,” on p. 4-3.)
Q
Is paper loaded correctly?
A
Make sure the paper stack in the cassette or the paper in the multi-purpose feeder is loaded
properly, and that the slide guides are adjusted correctly. (See “Loading Paper,” on p. 4-3.)
Q
Is the cassette inserted into the machine correctly?
A
Push the cassette into the machine as far as it will go, and make sure the cassette is not tilted or
inserted at an angle.
Paper feeds skewed. (Printing is skewed.)
13
Q
Is paper loaded correctly?
A
Make sure the paper stack in the cassette or the paper in the multi-purpose feeder is loaded
properly, and that the slide guides are adjusted correctly. (See “Loading Paper,” on p. 4-3.)
A
Make sure the paper exit path is clear.
Troubleshooting
Multiple sheets feed into the machine at the same time.
13-12
Q
Is paper loaded correctly?
A
Make sure the paper stack in the cassette or the paper in the multi-purpose feeder is loaded
properly, and that the slide guides are adjusted correctly. (See “Loading Paper,” on p. 4-3.)
Q
Have you fanned the paper stack before loading it in the cassette?
A
Be sure to fan the paper stack before loading it in the cassette. This keeps the sheets of paper from
sticking together.
Paper Feeding Problems
Q
Does the cassette or multi-purpose feeder contain an appropriate quantity of sheets?
A
Make sure the paper stack in the cassette or the paper in the multi-purpose feeder does not exceed
the capacity of the cassette or multi-purpose feeder. (See “Loading Paper,” on p. 4-3.)
A
Do not force the paper stack into the cassette or the paper into the multi-purpose feeder.
A
Load paper one by one in the multi-purpose feeder.
Q
Is only one type of paper loaded in the cassette or multi-purpose feeder?
A
Load only one type of paper.
A
Make sure you load paper that meets the paper requirements for the machine. (See Chapter 4,
“Paper Handling.”)
Transparencies do not feed correctly.
Q
Are the transparencies loaded correctly?
A
Make sure the transparencies in the cassette* or the transparency in the multi-purpose feeder is
loaded properly, and that the slide guides are adjusted correctly. (See “Loading Paper,” on p. 4-3.)
Q
Is the proper transparency loaded in the multi-purpose feeder?
A
Do not use any transparencies designed for color copiers. They will cause a paper jam. Please use
transparencies recommended by Canon.
*Only for the FAX-L380S model.
Paper feeds curled.
Is the proper paper loaded?
A
Check if the proper paper is loaded in the cassette or multi-purpose feeder. (See Chapter 4, “Paper
Handling.”)
Paper stacked roughly.
Q
Is the proper paper loaded?
A
Check if the proper paper is loaded in the cassette or multi-purpose feeder. (See Chapter 4, “Paper
Handling.”)
A
Check if the appropriate paper type is selected in <PAPER TYPE> in <PAPER SETTINGS> of the
Menu. (See “Loading Paper,” on p. 4-3.)
Paper Feeding Problems
13-13
13
Troubleshooting
Q
Repeated paper jams occur.
Q
Is the proper paper loaded?
A
Check that the size, thickness and type of the paper you are using. (See “Print Media Requirements,”
on p. 4-1.)
Q
Is the proper paper loaded correctly?
A
Be sure to fan the paper stack before loading it in the cassette. This keeps the sheets of paper from
sticking together.
Q
Is the output tray free of obstructions?
A
Do not place the delivered paper back on the output tray. (See “Face Down Paper Output Area,” on
p. 4-13.)
A
Do not place objects other than paper on the output tray. (See “Face Down Paper Output Area,” on
p. 4-13.)
Q
Is the machine installed in a proper location?
A
Check that the machine is installed in the proper location. (For information about specifications of the
machine, see Appendix A, “Specifications.” For safety warnings and cautions, see “Choosing a
Location for Your Machine,” on p. 2-1.)
Envelopes do not feed correctly.
Troubleshooting
13
13-14
Q
Are the envelopes loaded correctly?
A
Make sure the envelopes are loaded correctly. (See “Loading Envelopes in the Cassette,” on p. 4-5,
or “Loading an Envelope in the Multi-Purpose Feeder,” on p. 4-9.) Do not load more than 20
envelopes in the cassette*. Load an envelope one by one in the multi-purpose feeder.
Q
Is the proper envelope loaded?
A
Load the recommended envelopes (COM10, MONARCH, DL, or ISO-C5) in the cassette* or
multi-purpose feeder. (See “Loading Envelopes in the Cassette,” on p. 4-5, or “Loading an Envelope
in the Multi-Purpose Feeder,” on p. 4-9.)
*Only for the FAX-L380S model.
Paper Feeding Problems
Faxing Problems
Sending Problems
You cannot send a fax.
Q
Is the machine overheated?
A
Unplug the machine and let it cool for approximate 3 minutes to 5 minutes. Then plug in the machine
and try sending again.
Q
Did you connect the power cord to the machine just now?
A
Wait for a while. After connecting the power cord, the machine cannot scan documents immediately.
Q
Is the machine set for the correct telephone line type (pulse/tone)?
A
Make sure the machine is set for the correct telephone line type. (See “Setting the Telephone Line
Type,” on p. 3-5.)
Q
Is the document loaded?
A
Remove the document, stack it if necessary, and load it in the ADF correctly.
Q
Is the One-Touch Speed Dial button or Coded Speed Dialing code you entered registered for the
feature you want to use?
A
Check the One-Touch Speed Dial button or Coded Speed Dialing code and make sure it is
registered correctly. (See Chapter 5, “Speed Dialing.”)
Q
Did you dial a correct number? Or have you been provided with an incorrect number?
A
Dial the number again, or check that you have the correct number.
Q
Does the other party’s fax machine have enough paper?
A
Call the other party and ask them to make sure paper is loaded in their fax machine.
Faxing Problems
Troubleshooting
13
13-15
Q
Did an error occur during sending?
A
Print an ACTIVITY REPORT and check for an error. (See “Activity Report,” on p. 12-1.)
Q
Is the telephone line working properly?
A
Make sure there is a dial tone when you pick up the handset of the telephone connected to the
machine. If there is no dial tone, contact your local telephone company.
Q
Is the receiving fax machine a G3 fax machine?
A
Make sure the receiving fax machine is compatible with the machine (which is a G3 fax machine).
Q
The other party’s telephone may be busy or the other party’s fax machine may be turned off. Is
<BUSY/NO SIGNAL> shown on the ERROR TX REPORT?
A
The fax/telephone number you dialed is busy. Try sending the document later.
A
The other party’s fax machine is not working. Contact the other party and have them check their fax
machine.
Q
Did the receiving fax machine answer within 55 seconds (after all automatic redialing attempts)?
A
Contact the other party and have them check their fax machine. For an overseas call, add pauses to
the registered number. (See “Dialing Long Distance,” on p. 9-2.)
Q
Is the In Use/Memory indicator lighting?
A
The In Use/Memory indicator may light, which means the extension phone is busy. Please wait until
the extension phone becomes free.
13
Q
Is the machine (sending fax machine) working properly?
Troubleshooting
Faxes sent from the machine are spotted or dirty.
A
Check the machine by making a copy. For more information, see Chapter 10, “Making Copies.”
If the copy is clear, the problem may be in the receiving fax machine. If the copy is spotted or dirty,
clean the scanning area in the machine. For more information, see Chapter 14, “Maintaining Your
Machine.”
Q
Is the document loaded?
A
Remove the document, stack it if necessary, and load it in the ADF correctly. (See “Loading
Documents in the ADF,” on p. 6-3.)
13-16
Faxing Problems
Cannot send using ECM (Error Correction Mode).
Q
Does the receiving fax machine support ECM?
A
If the receiving fax machine does not support ECM, the document is sent in the normal mode without
error checking.
Errors occur frequently while sending.
Q
Are the telephone lines in proper condition? Or do you have a good connection?
A
Lower the transmission speed. (See “3.TX START SPEED,” on p. 15-6.)
Receiving Problems
Cannot receive a fax automatically.
Is the machine set to receive automatically?
A
For the machine to receive faxes automatically, the receive mode must be set to <FaxOnly> mode,
<FaxTel> mode, or <AnsMode>. (See Chapter 7, “Receiving Faxes.”) If you have set <AnsMode>,
confirm that an answering machine is connected to the machine and that it is turned on with an
outgoing message properly recorded.
If you set <3. MAN/AUTO SWITCH> to <ON> in <FAX SETTINGS> of the Menu, the machine will
receive faxes automatically even when the receive mode is set to <Manual> mode. (See “4.MAN/
AUTO SWITCH,” on p. 15-10.)
Q
Is the memory full?
A
Wait for the machine to finish any fax or print jobs stored in the memory or delete them from the
memory. (See p. 11-2) Then ask the other party to resend the fax.
Q
Did an error occur during reception?
A
Print an ACTIVITY REPORT and check for an error. (See “Activity Report,” on p. 12-1.) You can also
check the RX REPORT when it is printed automatically. (See “Reception (RX) Report,” on p. 12-4.)
Q
Is the telephone line connected properly?
A
Make sure all line connections are secure. (See “Connecting the Telephone Line,” on p. 2-8.)
Faxing Problems
13-17
13
Troubleshooting
Q
The machine does not switch automatically between telephone and fax receptions.
Q
Is the machine set to switch automatically between telephone and fax receptions?
A
For the machine to switch automatically, the receive mode must be set to <AnsMode>. (See Chapter
7, “Receiving Faxes.”)
Confirm that an answering machine is connected to the machine and that it is turned on with an
outgoing message properly recorded.
Q
Are you answering the call on a telephone connected to the machine?
A
Answer calls using the optional handset or a telephone connected to the unit.
Q
Is the sending fax machine able to send the CNG signal that tells the machine that the incoming
signal is a fax?
A
Some fax machines cannot send the CNG signal that tells the machine the incoming call is a fax.
In such cases, you will have to receive the fax manually. (See “Receiving Faxes Manually: Manual
Mode,” on p.7-4.)
Cannot receive a document manually.
Q
Is the machine set to receive manually?
A
For the machine to receive faxes manually, the receive mode must be set to <Manual> mode. (See
Chapter 7, “Receiving Faxes.”)
Q
Did you press [Start] after hanging up the handset?
A
Always press [Start] before hanging up the handset. Otherwise you will disconnect the call.
Print quality is poor.
Troubleshooting
13
Q
Are you using the correct type of paper?
A
Make sure you load paper that meets the paper requirements for the machine. For more information,
see Chapter 10, “Making Copies.”
Q
Is the sending fax machine functioning properly?
A
The sending fax machine usually determines the fax’s quality. Call the sender and have them make
sure the scanning glass of their fax machine is clean.
Faxes do not print.
13-18
Q
Is the cartridge installed properly?
A
Make sure the cartridge is installed properly. For more information, see “Installing/Replacing the
Toner Cartridge,” on p. 2-18.
Faxing Problems
Q
Is any toner left in the cartridge?
A
Replace the cartridge with a new one. For more information, see “Installing/Replacing the Toner
Cartridge,” on p. 2-18.
A
Select <KEEP PRINTING> in <TONER SUPPLY LOW> in <FAX SETTINGS> of the Menu. With this
setting, the machine will not store documents in the memory even if the toner has run out.
(See “2.TONER SUPPLY LOW,” on p. 15-11.)
Q
Is the correct paper loaded in the cassette?
A
Make sure paper is loaded in the cassette. For more information, see Chapter 4, “Paper Handling.”
A
Load the correct paper size or change <PAPER SIZE> in <PAPER SETTINGS> of the Menu. For
more information see Chapter 4, “Paper Handling,” or Chapter 10, “Making Copies.”
Faxed images are blotched or uneven.
Q
Are the telephone lines in proper condition? Or do you have a good connection?
A
ECM (Error Correction Mode) for sending/receiving should eliminate such problems. However, if the
telephone lines are in poor condition, you may have to try again. Then call the sender to resend the
document.
Q
Is the sending fax machine functioning properly?
A
The sending fax machine usually determines the fax’s quality. Call the sender and have them make
sure the scanning glass of their fax machine is clean.
Cannot receive a fax using ECM (Error Correction Mode).
Does the sending fax machine support ECM?
A
If the sending fax machine does not support ECM, the document is received in the normal mode
without error checking.
Errors occur frequently while receiving.
Q
Is the sending fax machine functioning properly?
A
Call the sender and have them check that their fax machine is functioning properly.
Faxing Problems
13
Troubleshooting
Q
13-19
Telephone Problems
You cannot dial.
Q
Is the telephone line connected properly?
A
Make sure all line connections are secure. (See “Connecting the Telephone Line,” on p. 2-8.)
Q
Is the machine set for the correct telephone line type (pulse/tone)?
A
Make sure the machine is set for the correct telephone line type. (See “Setting the Telephone Line
Type,” on p.3-5.)
The telephone disconnects while you are talking.
Q
Is the telephone line connected in securely?
A
Check that the telephone cables are connected securely to the jacks on the machine, the telephone
jack on your wall and the jack on your telephone. (See “Connecting the Telephone Line,” on p. 2-8.)
Troubleshooting
13
13-20
Telephone Problems
Copying Problems
The machine will not make a copy.
Q
Is the cartridge installed correctly?
A
Make sure the cartridge is installed correctly. (See “Installing/Replacing the Toner Cartridge,” on
p. 2-18.)
Q
Is the sealing tape removed from the cartridge?
A
Remove the sealing tape from the cartridge. (See “Installing/Replacing the Toner Cartridge,” on
p. 2-18.)
Q
Is the cassette inserted completely into the machine?
A
Insert the cassette as far as it will go. (See “Loading Paper in the Cassette,” on p. 2-22.)
Q
Did you connect the power cord to the machine just now?
A
Wait for a while. After connecting the power cord, the machine cannot scan documents immediately.
Q
Is the document loaded correctly?
A
Remove the document, stack it if necessary, and load it in the ADF correctly. (See “Loading
Documents in the ADF,” on p. 6-3.)
A
Make sure the ADF is closed.
13
Q
Are the scanning glass and rollers of the ADF clean?
A
Clean the scanning glass and rollers of the ADF. (See “Cleaning the ADF Area,” on p. 14-2.)
Troubleshooting
If the documents have black streaks or appear dirty after you feed them in the ADF.
NOTE
For additional troubleshooting, see “Print Quality Problems,” on p. 13-22.
Copying Problems
13-21
Print Quality Problems
The print quality is not what you expect; print is not clear, has missing dots or white streaks.
Q
Are the size, thickness and type of the paper you are using within the specifications of the machine?
A
Check that the paper you are using is supported by the specifications of the machine. (See “Print
Media Requirements,” on p. 4-1.)
Q
Is the cartridge installed correctly?
A
Make sure the cartridge is installed correctly. (See “Installing/Replacing the Toner Cartridge,” on
p. 2-18.)
Q
Is any toner left in the cartridge?
A
Replace the cartridge if necessary. (See “Installing/Replacing the Toner Cartridge,” on p. 2-18.)
Q
Is the exposure adjusted correctly?
A
Adjust the exposure correctly using [Exposure]. (See “Adjusting the Exposure (Density),” on p. 10-6.)
Copies are dirty.
Troubleshooting
13
13-22
Q
Is the scanning glass or the scanning glass cover clean?
A
Clean the scanning glass or the scanning glass cover. (See “Cleaning the ADF Area,” on p. 14-2.)
Q
Is the cartridge free of damage?
A
If there is a scratch on the cartridge, replace with a new one. (See “Installing/Replacing the Toner
Cartridge,” on p. 2-18.)
Q
Is the machine adjusted to room temperature? If not, condensation might build up inside the
machine.
A
Allow at least 2 hours for the machine to adjust to room temperature before attempting to use it.
Print Quality Problems
Q
Is the machine installed in a stable location?
A
Install the machine in a proper location. (See “Choosing a Location for Your Machine,” on p. 2-1.)
Copies are too dark or too light.
Q
Is the exposure adjusted correctly?
A
Adjust the exposure correctly using [Exposure]. (See “Adjusting the Exposure (Density),” on p. 10-6.)
Q
Is the machine in the toner saver mode?
A
Set <TONER SAVER MODE> to “OFF” in <COMMON SETTINGS> of the Menu. (See “5.TONER
SAVER MODE,” on p. 15-4.)
The printouts are partly missing or shaded when you make copies on heavy paper.
Q
Is the paper type set correctly?
A
Select <HEAVY PAPER> or <HEAVY PAPER H> in <PAPER TYPE> in <PAPER SETTINGS> of the
Menu. (See “Loading Paper,” on p. 4-3.)
The printouts are missing when you make copies on rough paper.
Q
Is the paper type set correctly?
A
Select <TRANSPARENCY> in <PAPER TYPE> in <PAPER SETTINGS> of the Menu. (See “Loading
Paper,” on p. 4-3.)
The edges of copies are dirty when you make copies.
Q
Is the paper size set correctly?
A
Specify the appropriate paper size in <PAPER SIZE> in <PAPER SETTINGS> of the Menu. (See
“Loading Paper,” on p. 4-3.)
Q
Is <FREESIZE> selected for the paper size?
A
Specify the appropriate size in <VERTICAL SIZE> or <HORIZONTAL SIZE> in <FREESIZE> in
<PAPER SETTINGS> of the Menu. (See “Specifying the Paper Size,” on p. 10-2.)
Print Quality Problems
13-23
Troubleshooting
13
Printing Problems
The Alarm indicator comes on.
Q
Does the machine feed paper correctly, or is there paper in the cassette or multi-purpose feeder?
A
Clear the paper jam, or load paper in the cassette or multi-purpose feeder. (For instructions on
clearing paper jam, see “Clearing Jams,” on p. 13-1. For instructions on loading paper, see “Loading
Paper,” on p. 4-3.)
A
If the machine has no paper jam, or paper is loaded in the cassette or multi-purpose feeder, unplug
the machine and wait approx. 3 minutes to 5 minutes, then plug it in again. If the problem is fixed, the
Alarm indicator will turn off, and the LCD will return to the standby mode. If the Alarm indicator
remains flash, unplug the machine, and contact your local authorized Canon dealer or the Canon
help line.
Printout does not match paper size.
Is the paper stack loaded and aligned correctly in the cassette, or is paper loaded in the
multi-purpose feeder correctly?
A
Make sure the paper is loaded and aligned correctly in the cassette or the paper is loaded correctly
in the multi-purpose feeder. (See “Loading Paper,” on p. 4-3.)
Q
Is the appropriate paper size set through the operation panel?
A
Specify the appropriate paper size in <PAPER SIZE> in <PAPER SETTINGS> of the Menu. (See
“Loading Paper in the Cassette,” on p. 4-3.)
Troubleshooting
13
Q
13-24
Printing Problems
If You Cannot Solve the Problem
If you have a problem with your machine and cannot solve it using the information in this chapter,
contact your local authorized Canon dealer or the Canon help line.
CAUTION
If the machine makes strange noises, emits smoke or strange smells, unplug it immediately and
contact your local authorized Canon dealer or the Canon help line. Do not attempt to disassemble or
repair the machine yourself.
NOTE
Attempting to repair the machine yourself may void the limited warranty.
Before contacting your local authorized Canon dealer or the Canon help line, make sure you have the
following information about your machine:
• The machine’s name: FAX-L380S/L390
• The machine serial number (on a label on the back of the machine)
SERIAL NUMBER
13
If You Cannot Solve the Problem
Troubleshooting
• Where you purchased the machine
• A detailed description of the problem
• The steps you have taken to solve the problem, and the results
13-25
Maintaining Your Machine
14
CHAPTER
Your machine requires no maintenance other than periodic cleaning, and replacing of the toner cartridge as needed.
Cleaning the Machine
Clean your machine regularly to keep it in good operating condition.
NOTE
Follow these precautions whenever you clean the machine:
- When cleaning the machine’s exterior or the scanning glass, be sure to disconnect the power cord before
cleaning the machine.
- When the power cord is disconnected, any documents stored in memory will be erased if you leave the machine
unplugged for 1 hour or more. Be sure to plug the machine in after cleaning to avoid this happening. If
<RECEIVED IN MEMORY> appears in the LCD display, follow steps on p. 7-6 to print out the document.
- If you disconnect the machine while it is waiting to send a document, you will have to set the machine to send
your document again once you finish cleaning the machine. However, when you have set a document for
delayed transmission, the machine holds the document in its memory for about 1 hour.
- Do not use tissue paper, paper towels, or similar materials for cleaning; they can stick to the components or
generate static charges.
- Never use volatile liquids such as thinner, benzene, acetone, or any other chemical cleaner to clean the interior
of the machine; these can damage the machine’s components.
Cleaning the Machine
14-1
Cleaning the Machine’s Exterior
1
2
Disconnect the power cord.
Wipe the machine’s exterior with a clean, soft, lint-free cloth moistened with water or diluted dishwashing
detergent solution.
CAUTION
Never use thinner, benzene, alcohol, or any other organic solvent to clean the machine, as these can
damage the machine’s surface.
3
Plug the power cord back in.
Cleaning the ADF Area
Black lines may appear in printouts when the ADF is used to feed documents.
This is caused by paste, ink, correction fluid, or other foreign matters in the read area of the ADF. Use
a clean soft cloth to wipe the read area clean. Take particular care to clean at the locations where the
black lines are appearing on printouts.
If you have trouble getting the glass clean, wipe with a cloth moistened with water or a mild neutral
detergent, and then wipe the glass dry with another cloth.
Read area
Copy
Black lines
Maintaining Your Machine
14
Paste,ink,
correction fluid,
etc
IMPORTANT
Paste, ink, correction fluid, and other foreign matter can soil the scanning glass when you send a document
through the ADF while the paste, ink, or correction fluid on the original is still wet. This is what causes black lines
on copies. Whenever you load a document is the ADF, always check to make sure that any paste, ink, or
correction fluid that is on the document is completely dry.
NOTE
When you unplug the machine, any documents stored in memory will be erased if you leave the machine
unplugged for 1 hour or more. Be sure to plug in the machine after cleaning to avoid this happening.
14-2
Cleaning the Machine
1
Disconnect the power cord.
2
Open the operation panel by gently pulling it up.
3
Use a soft, dry, clean cloth to clean the scanning glass and rollers (shaded areas).
• If the document scanning glass and rollers are dirty, the documents you send or print will also be dirty.
• Clean with a soft cloth that will not scratch the glass or rollers.
• Use a soft, dry, clean cloth to wipe up paper dust around the rollers.
SCANNING
GLASS
Clean the shaded areas of the operation panel and the machine.
Dirt and dust particles that collect on the underside of the operation panel also affect the quality of documents you
copy and send.
14
Maintaining Your Machine
4
Cleaning the Machine
14-3
5
When you finished, close the operation panel by pressing it down from the center.
NOTE
Be sure to close the operation panel until it locks into place. Otherwise the machine will not function properly.
6
Plug the power cord back in.
Maintaining Your Machine
14
14-4
Cleaning the Machine
Transporting the machine
Be sure to disconnect the power cord before transporting the machine. If the machine is likely to be
subjected to vibration (e.g., when transporting over long distances), the following precautions should
be taken. If you do not follow these precautions, the machine may be damaged or the quality of your
printouts may be adversely affected.
1
Disconnect the power cord.
2
If the machine is connected to a telephone or your computer, remove the telephone line or printer cable.
3
Open the printer cover.
4
Grip the end of the cartridge, and remove it from the machine. In order to avoid direct sunlight, place the
cartridge in the protective bag that the cartridge came in when you purchased it.
5
Close the printer cover.
6
Pull out the cassette completely, and remove the extension cover from the machine.
7
Detach the cassette extension from the cassette.
8
Insert the cassette in the machine.
9
Remove the output tray and document output tray.
Maintaining Your Machine
14
Transporting the machine
14-5
15
The Menu System
CHAPTER
The Menu allows you to specify or register various settings. This chapter explains the procedure to access the menus
and their contents.
Accessing the Menu
1
Press [Menu].
2
Press [
(-)] or [
(+)] to select the menu you want to change ➞ press [OK].
ADDITIONAL FUNCTIONS
COPY SETTINGS
➞
3.COPY SETTINGS
1.STD. IMAGEQUALITY
3
Press [
(-)] or [
(+)] to select the submenu you want to change ➞ press [OK].
COPY SETTINGS
STANDARD EXPOSURE
2.STANDARD EXPOSURE ➞
MANUAL
NOTE
• For details on submenus, see “Menu Descriptions,” on p. 15-2.
• After selecting the item or value with [ (-)] or [ (+)], press [OK] to enter the setting.
• If you press [Stop/Reset] before [OK] is pressed, the item you have selected will not be registered.
• Press [Stop/Reset] to exit from the Menu.
• If you press [Menu], the display returns to the previous screen.
Accessing the Menu
15-1
Menu Descriptions
1. PAPER SETTINGS
Name
Descriptions
1.CASSETTE
1.PAPER SIZE
Sets the paper size for the paper cassette.
FAX-L380S: A4, B5, A5, LTR, EXECUTIV,
ENVELOPE (You can select from COM10,
MONARCH, DL, or ISO-C5.)
FAX-L390: A4, LTR
2.PAPER TYPE
Sets the paper type to be used in the paper
cassette.
FAX-L380S: PLAIN PAPER,
TRANSPARENCY, PLAIN PAPER L, HEAVY
PAPER, HEAVY PAPER H
FAX-L390: PLAIN PAPER, PLAIN PAPER L
2.MP TRAY
1.PAPER SIZE
Sets the paper size for the multi-purpose
feeder.
A4, B5, A5, LTR, LGL, EXECUTIV,
ENVELOPE (You can select from DL, ISO-C5,
COM10, or MONARCH), FREESIZE
(Horizontal and vertical size can be specified in
millimeters.)
2.PAPER TYPE
Sets the paper type to be used on the
multi-purpose feeder.
PLAIN PAPER, TRANSPARENCY, PLAIN
PAPER L, HEAVY PAPER, HEAVY PAPER H
The Menu System
15
(The factory default setting is in bold face.)
15-2
Menu Descriptions
2. COMMON SETTINGS
Name
Descriptions
Selects which mode is displayed in the LCD
when the power cord is connected, or the
AUTO CLEAR function activates.
COPY
The Copy mode is selected.
FAX
The Fax mode is selected.
2.SW AFTER AUTO CLR
Selects whether the machine switches to the
mode you set in <DEFAULT SETTINGS> after
the AUTO CLEAR function activates.
DEFAULT MODE
The machine automatically switches to the
mode you set in <DEFAULT SETTINGS> after
the AUTO CLEAR function activates.
CURRENT MODE
The machine does not automatically switch to
the mode you set in <DEFAULT SETTINGS>
even after the AUTO CLEAR function activates.
3.VOLUME CONTROL
1.KEYPAD VOLUME
Adjusts the volume of the machine.
Adjusts the keypad volume.
ON
1 to 3
OFF
The volume is turned off.
2.ALARM VOLUME
Adjusts the alarm volume.
ON
1 to 3
OFF
The volume is turned off.
3.TX DONE TONE
Adjusts the volume of the done tone sounded
when the machine has finished sending faxes.
ON
1 to 3
ERROR ONLY
1 to 3
OFF
The volume is turned off.
15
(The factory default setting is in bold face.)
Menu Descriptions
15-3
The Menu System
1.DEFAULT SETTINGS
Name
4.RX DONE TONE
Descriptions
Adjusts the volume of the done tone sounded
when the machine has finished receiving faxes.
ON
1 to 3
ERROR ONLY
1 to 3
OFF
The volume is turned off.
5.PRINTING END TONE
Adjusts the volume of the done tone sounded
when the machine has finished printing.
ON
1 to 3
ERROR ONLY
1 to 3
OFF
The volume is turned off.
6.SCANNING END TONE
Adjusts the volume of the done tone sounded
when the machine finished scanning.
ON
1 to 3
ERROR ONLY
1 to 3
OFF
The volume is turned off.
7.LINE MONITOR VOL.
Adjusts the line monitor volume.
ON
1 to 3 (2)
OFF
The volume is turned off.
4.PRINT EXPOSURE
5.TONER SAVER MODE
Adjusts the exposure to one of 5 levels.
(center)
Sets the toner saver mode.
ON
The toner saver mode is turned on.
OFF
The toner saver mode is turned off.
6.DISPLAY LANGUAGE
The Menu System
15
Select the message language.
ENGLISH, FRENCH, SPANISH, GERMAN,
ITALIAN, DUTCH, FINNISH, PORTUGUESE,
NORWEGIAN, SWEDISH, DANISH,
SLOVENE, CZECH, HUNGARIAN, RUSSIAN
(The factory default setting is in bold face.)
15-4
Menu Descriptions
3. COPY SETTINGS
Name
Descriptions
1.STD. IMAGEQUALITY
Select the document type.
TEXT ORIGINAL: Character mode
TEXT/PHOTO*1: Text/photo mode
PHOTO*1: Photo mode
2.STANDARD EXPOSURE
Select the auto or manual mode of exposure
setting.
AUTO*2
The exposure is adjusted automatically.
MANUAL
The exposure is adjusted manually.
The exposure can be adjusted in 9 steps.
(center)
3.STD ZOOM RATIO
Selects the copy ratio 050% to 200%. (100%)
4.STANDARD COPY QTY
Select the copy quantity.
01 to 99 (01)
5.AUTO SORT
Set the auto sort.
ON
The auto sort function is turned on.
OFF
The auto sort function is turned off.
The paper size group can be selected. If the
paper size group is changed, the preset copy
ratios will change.
INCH
Preset copy ratios: 50%, 64%, 78%, 100%,
129%, 200%
A
Preset copy ratios: 50%, 70%, 100%, 141%,
200%
AB
Preset copy ratios: 50%, 70%, 81%, 86%,
100%, 115%, 141%, 200%
7.SHARPNESS
Black and white of an image can be sharpened.
When you want to make characters and lines
clear, select a big number. When you make
copies of photographs, select a small number.
1 to 9 (5)
(The factory default setting is in bold face.)
*1 STANDARD EXPOSURE automatically changes to MANUAL when TEXT/PHOTO or PHOTO is selected.
*2 STD. IMAGEQUALITY automatically changes to TEXT ORIGINAL when AUTO is selected.
Menu Descriptions
15-5
15
The Menu System
6.PAPER SIZE GROUP
4. FAX SETTINGS
Name
1.USER SETTINGS
1.TEL LINE SETTINGS
Specifies the telephone line settings.
1.USER TEL NO.
Your telephone and fax number can be
registered within 20 digits, including spaces.
2.TEL LINE TYPE
Selects the telephone line type.
TOUCH TONE
The telephone line is set for touch tone dialing.
ROTARY PULSE
The telephone line is set for rotary pulse dialing.
3.TX START SPEED
Sets the transmission speed for all documents
you send.
33600bps/14400bps/9600bps/7200bps/
4800bps/2400bps
4.RX START SPEED
Sets the transmission speed for all documents
you receive.
33600bps/14400bps/9600bps/7200bps/
4800bps/2400bps
2.UNIT NAME
You can register your name or your company
name within 24 characters, including spaces.
3.TX TERMINAL ID
Prints your ID (Transmitting Terminal ID) on
each page you transmit.
ON
15
The Menu System
Descriptions
Specifies the basic operation settings in the Fax
mode.
OFF
After you turn the terminal ID on, you can do
the following settings.
1.TTI POSITION
OUTSIDE IMAGE: Terminal ID is printed
outside the image border.
INSIDE IMAGE: Terminal ID is printed inside
the image border.
2.TEL NUMBER MARK
Selects the prefix for the identification header
number.
FAX, TEL
No terminal ID is printed on the pages you send.
(The factory default setting is in bold face.)
15-6
Menu Descriptions
4.DENSITY CONTROL
Descriptions
Adjusts the scanning density.
1.LIGHT
Sets for dark documents. (3)
2.STANDARD
Sets for standard documents. (5)
3.DARK
5.OFFHOOK ALARM
Sets for light documents. (7)
Enables/disables the offhook alarm that alerts
you when the handset is not in the handset
cradle.
ON
After reception, the offhook alarm sounds when
the handset is left off the hook.
OFF
No offhook alarm.
6.R-KEY SETTING
Sets how the fax connects to PBX. If your fax
machine is not connected through a PBX, you
can ignore these settings.
PSTN
The fax is connected to the outside line.
PBX
The fax is connected through a PBX. Select
one of the following settings, depending on the
type of PBX in service. Two settings are
available:
HOOKING
PREFIX
If you select PREFIX, you can set
a number up to 20 digits long,
including the “P” at the end.
2.REPORT SETTINGS
1.TX REPORT
Sets the report setting.
Enables/disables automatic printing of a
transmission report.
OUTPUT NO
No report is printed.
PRINT ERROR ONLY
Prints a report only when a transmission error
occurs.
REPORT WITH TX IMAGE
Enables/disables printing of the first page of the
fax under the report.
ON
Prints the first page.
OFF
No first page is printed.
(The factory default setting is in bold face.)
Menu Descriptions
15-7
15
The Menu System
Name
Name
OUTPUT YES
REPORT WITH TX IMAGE
ON
OFF
2.RX REPORT
Descriptions
Prints a report every time you send a document.
Enables/disables printing of the first page of the
fax under the report.
Prints the first page.
No first page is printed.
Enables/disables automatic printing of a
reception report.
OUTPUT NO
No report is printed.
PRINT ERROR ONLY
Prints a report only when a reception error
occurs.
OUTPUT YES
Prints a report every time you receive a document.
3.ACTIVITY REPORT
Enables/disables automatic printing of an
ACTIVITY REPORT after every 20
transactions.
ON
Prints the ACTIVITY REPORT.
OFF
No ACTIVITY REPORT is printed.
3.TX SETTINGS
1.ECM TX
Sets the transmission functions.
ECM (Error Correction Mode) transmission is
turned on or off.
ON
All transmissions are conducted with ECM if the
other party’s fax supports ECM.
OFF
ECM is turned off.
2.PAUSE TIME
Sets the length of the pause you insert into a
dialing sequence.
01 to 15SEC (02 SEC)
(The factory default setting is in bold face.)
The Menu System
15
15-8
Menu Descriptions
Name
3.AUTO REDIAL
ON
Descriptions
Sets whether to perform automatic redial when
the other line is busy or no answer.
Customizes the redial operation.
1.REDIAL TIMES
Sets the number of retries.
01 to 10TIMES (02 TIMES)
2.REDIAL INTERVAL
Sets period of time between redialings.
02 to 99MIN. (02 MIN.)
OFF
4.TIME OUT
After the first attempt at dialing fails, redialing is
not attempted.
Enables/disables automatic scanning of
documents after the fax number is entered by
using speed dialing.
ON
Scanning begins automatically in 5 or 10
seconds after you enter the phone number.
OFF
Press [Start] to scan document. Otherwise,
AUTO CLEAR function activates and the LCD
returns to standby mode after 2 minutes.
4.RX SETTINGS
1.ECM RX
Sets the reception functions.
ECM (Error Correction Mode) reception is
turned on or off.
ON
All receptions are conducted with ECM if the
other party’s fax supports ECM.
OFF
ECM is turned off.
1.RING START TIME
When FaxTel has been set, the optional
settings are available.
Sets the duration that the machine listens for a
fax tone before starting to ring.
00 to 30SEC (08 SEC)
(The factory default setting is in bold face.)
15
The Menu System
2.FAX/TEL OPT. SET
Menu Descriptions
15-9
Name
Descriptions
2.F/T RING TIME
Sets the length of time the machine rings to
alert you of an incoming call.
010 to 060SEC (022 SEC)
3.F/T SWITCH ACTION
Selects the action taken after the F/T RING
TIME expires.
RECEIVE
The machine switches to the fax receive mode
automatically at this point and starts to receive
the document.
DISCONNECT
The machine disconnects the call.
3.INCOMING RING
Sets whether the machine rings when it
receives a call when the machine is set to
FaxOnly.
OFF
The machine does not ring when it receives a
fax. (In Energy Saver mode, the fax may ring
one or two times.)
ON
The machine rings when it receives a fax if a
telephone is connected.
RING COUNT
Sets the number of incoming rings before the
machine answers.
01 to 99TIMES (02TIMES)
4.MAN/AUTO SWITCH
Sets whether the machine switches to
document receive mode after ringing for a
specified length of time in the manual receive
mode.
OFF
The machine keeps ringing until someone
answers the call manually with a connected
extension telephone.
ON
The machine switches to document receive
mode after ringing for a specified time.
F/T RING TIME
15
Sets the length of time to elapse before the
machine switches to the document receiving.
01 to 99SEC (15SEC)
The Menu System
(The factory default setting is in bold face.)
15-10
Menu Descriptions
Name
5.REMOTE RX
ON
Descriptions
Enables/disables remote receiving.
The machine enables remote receiving.
REMOTE RX ID
OFF
You can dial code on the remote extension to
start receiving a document.
A combination of two characters using [0] to [9],
[ ] and [#] is possible. (25)
The machine disables remote receiving.
5.PRINTER SETTINGS
1.RX REDUCTION
ON
Sets the print functions.
Receives images at a reduced size.
Image reduction is turned on.
1.RX REDUCTION
AUTO SELECTION: Reducing size is set
automatically.
FIXED REDUCTION: Reducing size is preset.
97%, 95%, 90%, 75%
2.SELECT REDUCE DIR
VERTICAL ONLY: Reduction is performed in
the vertical direction only.
HORIZ & VERTICAL: Reduction is performed
in the horizontal and vertical direction.
OFF
2.TONER SUPPLY LOW
Image reduction is turned off.
Allows you to set how the machine responds
when the toner supply is low.
RX TO MEMORY
The machine receives all documents in memory.
KEEP PRINTING
The keep printing function is turned on. With
this setting, the machine will not store
documents in memory if the toner has run out.
Re-set to RX TO MEMORY after replacing the
cartridge with a new one.
(The factory default setting is in bold face.)
The Menu System
15
Menu Descriptions
15-11
Name
6.POLLING BOX
1.SETUP FILE
Descriptions
Sets the functions of SETUP FILE, CHANGE
DATA and DELETE FILE.
Registers a polling box.
1.FILE NAME
Enters a name for poling box (Max. 24
characters, including spaces).
2.PASSWORD
Enters a password to protect the polling box
settings (Max. 7 characters).
3.ERASE AFTER TX
Tells the machine how to handle a document
after it is polled and sent.
ON, OFF
2.CHANGE DATA
Changes the settings of the polling box.
1.FILE NAME
Changes the file name.
2.PASSWORD
Changes the password.
3.ERASE AFTER TX
Changes the ERASE AFTER TX setting.
3.DELETE FILE
7.SYSTEM SETTINGS
1.MEMORY LOCK RX
Deletes the polling box and all of its settings.
Sets the functions of MEMORY LOCK RX, FAX
DEFAULT, LOCK PHONE.
Sets the Memory Lock functions.
OFF
Prints a document as soon as the machine
receives it.
ON
Receives and stores all documents in memory.
They will not be printed out unless the Memory
Lock password is entered.
The Menu System
15
1.MEM LOCK PASSWORD
0 to 9999999
This password protects the Memory Lock
settings. Setting a password is recommended.
You must use this password to unlock the
memory so you can print documents stored in
memory. Use the numeric buttons to enter a
password (up to seven digits).
2.REPORT
Sets the machine to print reports. This setting
affects only reports that print automatically,
such as an Activity Report.
(The factory default setting is in bold face.)
15-12
Menu Descriptions
Name
Descriptions
OUTPUT NO
No report prints while in the Memory Lock
mode.
OUTPUT YES
A report prints while the machine is in the
Memory Lock mode.
2.FAX DEFAULT
1.RESOLUTION
Sets the FAX DEFAULT functions.
Sets the fax resolution.
OFF
The setting of resolution set using [Image
Quality] remains even after the AUTO CLEAR
function activates.
STANDARD
Suitable for most text-only documents.
FINE
Suitable for fine-print documents.
PHOTO
Suitable for documents that contain
photographs.
SUPER FINE
Suitable for documents that contain fine print
and images. (The resolution is four times that of
STANDARD)
ULTRA FINE
Suitable for documents that contain fine print
and images. (The resolution is eight times that
of STANDARD)
2.SCAN DENSITY
3.LOCK PHONE
Sets the machine’s standard scanning density.
OFF, LIGHT, STANDARD, DARK
Sets the LOCK PHONE functions.
OFF
Outgoing voice call is operational.
ON
Outgoing voice call is not operational.
(The factory default setting is in bold face.)
The Menu System
15
Menu Descriptions
15-13
5. ADD. REGISTRATION
Name
1.1-TOUCH SPD DIAL
1-TOUCH SPD DIAL
Descriptions
Registers the information on One-Touch Speed
Dialing.
Up to 32 destinations can be registered.
Selects a One-Touch Speed Dial button.
1.TEL NUMBER ENTRY
Registers the other party’s telephone number
(Max. 120 digits, including spaces).
2.NAME
Registers the other party’s name (Max. 16
characters, including spaces).
2.CODED SPD DIAL
Registers the information on Coded Speed
Dialing.
CODED SPD DIAL
Selects a Coded Speed Dialing code.
1.TEL NUMBER ENTRY
Registers the other party’s telephone number
(Max. 120 digits, including spaces).
2.NAME
Registers the other party’s name (Max. 16
characters, including spaces).
3.GROUP DIAL
Registers the information on Group Dialing.
1.TEL NUMBER ENTRY
Registers the other party’s telephone numbers
by specifying the One-Touch Speed Dial
buttons or Coded Speed Dialing codes.
2.NAME
Registers the group’s name (Max. 16 characters,
including spaces).
(The factory default setting is in bold face.)
6. PRINTER SETTINGS
15
The Menu System
Name
Descriptions
1.PRESET PRINT QTY
Sets the standard number of pages of the
printer function. 01 to 99 (01)
2.AUTO ERROR SKIP
Sets either printing with skipping an error
automatically, or without skipping an error.
(The factory default setting is in bold face.)
15-14
Menu Descriptions
Name
Descriptions
ON
The auto error skip is on. The error is skipped
and shifted to the next job automatically without
indicating an error code.
OFF
The auto error skip is off. Skip the error and
shift to the next job manually.
3.ERROR TIME OUT
Sets the length of time before the machine
returns an error when no data is received from
the computer.
ON
The error time out is on. Sets time out period
005SEC to 300SEC. (015SEC)
OFF
The error time out is off.
4.PRINTER RESET
Cancels the job currently being received and
the job already received.
(The factory default setting is in bold face.)
7. TIMER SETTINGS
Descriptions
1.DATE/TIME SETTING
Enter the current date and time.
2.AUTO CLEAR
Sets the auto clear function. If the machine
remains idle for a certain period of time, the
display returns to the standby mode.
ON
The auto clear function is turned on.
1MIN. to 9MIN. (2MIN.)
OFF
The auto clear function is turned off.
3.ENERGY SAVER
Sets the energy saver mode.
ON
The energy saver mode is set.
03MIN. to 30MIN. (05MIN.)
OFF
The energy saver mode is turned off.
4.DATE SETUP
15
Set the format for the DATE & TIME settings
menu and how the date is displayed in the LCD.
DD/MM YYYY, YYYY MM/DD, MM/DD/YYYY
(The factory default setting is in bold face.)
Menu Descriptions
15-15
The Menu System
Name
Name
5.SUMMER TIME
Descriptions
Sets the summer time.
OFF
The summer time setting is disabled.
ON
The summer time setting is enabled.
1.BEGIN DATE/TIME
Sets the MONTH, WEEK, DAY and TIME when
the summer time starts.
2.END DATE/TIME
Sets the MONTH, WEEK, DAY and TIME when
the summer time ends.
(The factory default setting is in bold face.)
8. PRINT LISTS
Name
Prints out a list of items set or registered in the
Menu.
2.SPEED DIAL LIST
Prints the list of the fax/telephone numbers
registered for One-Touch Speed Dial buttons,
Coded Speed Dialing codes or group dialing.
1.1-TOUCH LIST
Prints the One-touch List.
1.NO SORT
The printout of the list is not sorted.
2.SORT
The printout of the list is sorted.
2.CODED DIAL LIST
Prints the Coded Dial List.
1.NO SORT
The printout of the list is not sorted.
2.SORT
The printout of the list is sorted.
3.GROUP DIAL LIST
3.CANCEL REPORT
15
REPORT STATUS
The Menu System
Descriptions
1.USER DATA
Prints the Group Dial List.
Cancels printout of the report. Select report you
want to cancel the printout.
Displays the report status and allows you to
select the report job to be canceled. Select a
job ➞ press [OK].
CANCEL REPORT? YES
The printout of the list is canceled.
CANCEL REPORT? NO
The printout of the list is not canceled.
(The factory default setting is in bold face.)
15-16
Menu Descriptions
A
Specifications
APPENDIX
The specifications for the machine are listed in this section.
General
Applicable line:
Compatibility:
Data compression system:
Modem type:
Modem speed:
Transmission speed:
Transmission/reception memory
Liquid crystal display:
Display languages:
Power source:
Power consumption:
Dimensions
(W × D × H):
Weight:
Environmental requirements:
Applicable standards:
*
Public Switched Telephone Network
G3
MH, MR, MMR, JBIG
FAX modem
33600, 31200, 28800, 26400, 24000, 21600, 19200, 16800, 14400, 12000,
9600, 7200, 4800, 2400 bps (automatic fallback)
Approx. 3 seconds/page*
(transmitting from memory)
Approx. 8 MB, DRAM, JBIG storage
Approx. 510 pages**
LCD displays memory used
20 × 2
ENGLISH, FRENCH, SPANISH, GERMAN, ITALIAN, DUTCH, FINNISH,
PORTUGUESE, NORWEGIAN, SWEDISH, DANISH, SLOVENE, CZECH,
HUNGARIAN, RUSSIAN
200–240 V/ 50/60 Hz
Maximum: Approx. 800 W
Minimum: Approx. 10 W
Energy Saver Mode: 7 W
FAX-L380S: 438 × 401 × 336 mm
FAX-L390: 441 × 466 × 392 mm
(main machine only, no trays, no optional handset)
Approx. 11 kg (12.1 kg for the FAX-L390 model)
Temperature: 10°–32.5°C
Humidity: 20–80% RH
Electrical safety: GS, EN60950, FIMKO
Radiation: CISPR Pub 22, Class B
PTT
Energy Star compliant
CE Marking
PC Interface:
USB Interface
Based on Canon FAX Standard Chart No.1, JBIG, standard mode
** Based on Canon FAX Standard Chart No.1, standard mode
General
A-1
Plain Paper Fax
50 A4- or LTR-size sheets
Automatic document feeder capacity:* 20 LGL-size sheets
1 sheet for sizes other than A4-, LTR, or LGL-size sheets.
Document size:
Document thickness:
Document weight:
Transmission time:
Resolution:
Scanning image processing:
Recording method:
Specifications
Fax printing speed:
Dialing:
A
Networking:
Report/reference:
Toner saver:
A-2
Plain Paper Fax
Multi-page document: Max.: 216 × 356 mm/ Min.: 148 × 105 mm
One-page document: Max.: 216 mm × approx. 1 m/ Min.: 148 × 105 mm
Multi-page document: 0.07 – 0.13 mm
One-page document: 0.06 – 0.23 mm
Multi-page document: 50 – 105 g/m2
One-page document: 50 – 240 g/m2
Approx. 3 seconds** (G3 JBIG)
Standard mode: 8 pels/mm × 3.85 lines/mm
Fine mode: 8 pels/mm × 7.7 lines/mm
Photo mode: 8 pels/mm × 7.7 lines/mm
Super fine mode: 8 pels/mm × 15.4 lines/mm
Ultra fine mode: 16 pels/mm × 15.4 lines/mm
Ultra-High-Quality Image
Processing System (UHQ™)
Halftones: 256 levels of gray
9 density adjustment levels
Laser Beam printing
Approx. 18 pages/minute**
Automatic dialing:
– One-Touch Speed Dialing (32 locations)
– Coded Speed Dialing (100 locations (FAX-L380S)/168 locations
(FAX-L390))
– Group Dialing (131 locations (FAX-L380S)/199 locations (FAX-L390))
Regular 10-button dialing
(with numeric buttons)
Automatic redialing
Manual redialing
Pause button
Delayed transmission (up to 142 locations (FAX-L380S)/210 locations
(FAX-L390) at a single pre-set time)
Sequential broadcast (up to 142 locations (FAX-L380S)/210 locations
(FAX-L390))
Automatic receiving
Non-ring reception
Deactivate ECM
NET SWITCH***
Activity report (up to 20 transactions)
Non-delivery report
TTI (Transmit Terminal Identification)
Economy mode for printing received faxes decreases toner consumption by
approx. 30%.
*
Based on 75 g/m2 paper
** Based on Canon FAX Standard Chart No.1, A4, standard mode
Specifications
*** This feature is available for certain countries only.
A
Plain Paper Fax
A-3
Copier
Resolution:
300 × 300 dpi
Default size:
100%
Zoom:
Multiple copies:
50-200%
Up to 99 copies of a document
Telephone
• Automatic FAX/TEL switchover
• Answering machine connection
(CNG detecting signal)
Specifications
• Telephone connection
• Optional handset connection*
• Remote reception by telephone
(Default reception ID: 25)
• Tone button
• Redial/Pause button
• NET SWITCH*
*
This feature is available for certain countries only.
A
A-4
Copier
Printer
Printing resolution:
Paper handling:
Acceptable recording paper stock
Envelope sizes:
Printing width:
Paper Feeding System
Printing Cartridge
Laser beam printing
1200 dpi enhanced × 600 dpi
Automatic feed
Cassette Feeding: 64 g/m2 to 128 g/m2 ; Multi-Purpose Feeder: 64 g/m2 to
128 g/m2
Plain paper, colored paper, recycled paper (including 100% recycled
paper), transparencies, envelopes, and heavy paper
(up to 128 g/m2)
European DL envelope (220 × 110 mm)
U.S. Commercial No. 10 envelope (9.5 × 4.1 in.)
Maximum 206 mm (A4)
Cassette Feeding: 250 sheets (FAX-L380S)/500 sheets (FAX-L390) of 64
g/m2
Multi-Purpose Feeder: 1 sheet
The Canon genuine Cartridge W Starter (Yield: Approx. 2,500 page of
printouts based on 5% coverage of a A4-size page)
The Canon genuine Cartridge W (Yield: Approx. 3,500 page of printouts
based on 5% coverage of a A4-size page)
Specifications
Printing method:
A
Printer
A-5
Printable Area: Papers
The shaded area in the following figure shows the printable area for papers.
■ Printable area:
Specifications
a:
b:
c:
d:
e:
f:
A
A-6
Printer
A4-size
LTR-size
LGL-size
210 mm
Max. 5.0 mm
Max. 5.0 mm
297 mm
Max. 5.0 mm
Max. 5.0 mm
8.5"
Max. 0.2"
Max. 0.2"
11.0"
Max. 0.2"
Max. 0.2"
8.5"
Max. 0.2"
Max. 0.2"
14.0"
Max. 0.2"
Max. 0.2"
Printable Area: Envelopes
The shaded portion in the following figure shows the printable area for envelopes.
b
c
e
d
f
■ Printable area:
U.S. Commercial No. 10
110 mm
Max. 5.0 mm
Max. 5.0 mm
220 mm
Max. 5.0 mm
Max. 5.0 mm
4.1"
Max. 0.2"
Max. 0.2"
9.5"
Max. 0.2"
Max. 0.2"
Specifications
a:
b:
c:
d:
e:
f:
European DL
CAUTION
A
For some envelope types, the edges of the envelope can not be printed on.
Printer
A-7
Document Sizes
The following illustrations show the largest and smallest documents you can feed into the machine.
Maximum Document Size
Minimum Document Size
216 mm
148 mm
105 mm
Multi-page document:
356 mm
One-page document:
1m
Specifications
The figure below shows how much of a A4-, LTR-, or LGL-size document the machine scans when
faxing or scanning.
A4/LETTER/LEGAL
A
The margin at each edge is outside the machine’s scanning area.
A-8
Document Sizes
Printer Driver
System requirements:
IBM or compatible computer with the following Pentium processor:
Microsoft Windows® 98, Windows® Me, Windows® 2000, or
Windows® XP
–Windows® 98: A 90-megahertz (MHz) Pentium processor or higher/At
least 32 MB of RAM and 115 MB of available hard disk space
–Windows® Me: A 150-MHz Pentium processor or higher/At least 32 MB of
RAM and 115 MB of available hard disk space
–Windows® 2000: A 133-MHz Pentium processor or higher/At least 64 MB
of RAM (Windows® 2000 Professional), or 128 MB of RAM (Windows®
2000 Server) and 500 MB of available hard disk space
–Windows® XP: A 300-MHz Pentium processor or higher/At least 64 MB of
RAM and 500 MB of available hard disk space
256-color SVGA monitor or greater
USB Port
USB cable no longer than 5 meters*
CD-ROM Drive, or access to one over a network connection
Specifications
*Only for the FAX-L380S model.
A
Printer Driver
A-9
Attaching the Optional
Handset to the Machine
B
APPENDIX
This section describes how to attach the optional handset to your machine.
Handset
The optional handset is available in certain countries. Contact your local authorized Canon dealer for
more information on purchasing this option.
NOTE
Please note that the shape of your handset may differ from the one shown in this section. However, both handsets
have exactly the same functions and performance.
Make sure you have the following items. If anything is damaged or missing, notify your Canon dealer
immediately.
HANDSET
SCREWS WITH PLUGS (2)
HANDSET CRADLE
Handset
B-1
Attaching the Handset to Your Machine
Attaching the Optional Handset to the Machine
To attach the handset to your machine, follow these steps:
1
Remove the screws from the plugs and insert the plugs into the holes on the handset cradle.
2
Insert the plugs with the handset cradle in the holes on the machine.
NOTE
If you have difficulty inserting the plugs, turn the machine so that the left side is facing you and the right side is
placed against a wall. This will allow you to insert the plugs without the machine moving.
B
B-2
Handset
3
Insert the screws into the plugs and push them in with your finger.
4
Connect the handset cord to the input jack marked
Attaching the Optional Handset to the Machine
at the back of the machine.
CAUTION
When carrying the machine, do not lift it by the handset cradle as it may break.
B
Handset
B-3
Adjusting the Ringer Volume Switch
The ringer volume switch allows you to select the ring volume of the handset for incoming calls. Use a
pen or other pointed object to adjust the switch to high or low.
Attaching the Optional Handset to the Machine
RINGER VOLUME SWITCH
The type of handsets you can connect is different depending on the area you use your machine.
Maintaining Your Handset
Follow these guidelines to maintain your handset in top working condition.
• Do not leave your handset exposed to direct sunlight.
• Do not install your handset in hot or humid conditions.
• Do not spray aerosol polishes on your handset as they may enter the holes on your handset and
cause damage.
• Use a damp cloth to clean your handset.
B
B-4
Handset
Country-Specific Features
C
APPENDIX
Australia
Telstra FaxStream™ Duet
In Australia, Telstra offers the FaxStream™ Duet capability. If you subscribe to this service, your line is
assigned two numbers: one for fax and one for phone. When the fax number is called, the network
sends a specific ringing tone which your unit recognizes and automatically handles as a fax call. If the
phone number is called, a different ringing tone is sent out from the network so that the call is handled
as a voice call.
This means that there is no switching delay at the caller’s end.
❑ Triple ring (short-short-short) for fax receiving.
Three short rings, at regular intervals.
❑ Any ring except triple ring (depending on your switchboard) for telephone conversation.
Contact Telstra for connection information.
Setting the FAX-L380S/L390 for Network Switch
Follow this procedure to set the receive mode to NET SWITCH:
1
Open One-Touch Speed Dial panel ➞ press [Receive Mode].
The LCD display shows the current receive mode setting.
2
Press [Receive Mode] repeatedly until the [NET SWITCH] appears ➞ press [OK].
Australia
C-1
Network Switch System Operation
The procedure for using the network switch system is almost the same as when using the FAX over a
normal telephone line. When you receive calls, however, the unit will respond slightly differently as
described below:
■ When you hear the telephone call ring pattern:
Pick up the handset and talk normally. If you hear a slow beep, it means the call is from a fax machine
trying to send a fax. Press [Start] to receive the fax. If you do not pick up the handset, the unit continues
to ring until the other party hangs up. If an answering machine is connected, it takes over the call.
■ When you hear the fax call ring pattern (triple ring):
Country-Specific Features
After the unit rings, it receives the document automatically.
C
C-2
Australia
New Zealand
Telecom FaxAbility
In New Zealand, Telecom N.Z. offers the FaxAbility capability. This service allows you to assign two
numbers to your line: one for fax and one for telephone. When the fax number is called, the network
sends a specific ring tone which your unit recognises and automatically handles as a fax call. If the
telephone number is called, a different ring tone is sent out from the network so that the call is handled
as a voice call. This means that there is no switching delay at the caller’s end.
Contact Telecom for connection information.
Setting the FAX-L380S/L390 for Network Switch
Follow this procedure to set the receive mode to NET SWITCH:
1
Open One-Touch Speed Dial panel ➞ press [Receive Mode].
The LCD display shows the current receive mode setting.
2
Press [Receive Mode] repeatedly until the [NET SWITCH] appears ➞ press [OK].
Network Switch System Operation
■ When you hear the telephone call ring pattern:
Pick up the handset and talk normally. If you hear a slow beep, it means the call is from a fax machine
trying to send a fax. Press [Start] to receive the fax. If you do not pick up the handset, the unit
continues to ring until the other party hangs up. If an answering machine is connected, it takes over the
call.
■ When you hear the fax call ring pattern:
After the unit rings, it receives the document automatically.
Country-Specific Features
The procedure for using the network switch system is almost the same as when using the FAX over a
normal telephone line. When you receive calls, however, the unit will respond slightly differently as
described below:
C
New Zealand
C-3
Glossary
APPENDIX
A
AC
Alternating current. The type of electrical current available from a wall outlet.
Activity report
A journal of the machine’s fax transactions, both sent and received.
Application program
Software prepared for a specific function or set of functions. Developers who make application programs
include drivers that support different types of printers.
ASCII
Acronym for American Standard Code for Information Interchange. A set of definitions for the bit composition
of characters and symbols. ASCII defines 128 symbols using 7 binary bits and 1 parity bit.
Auto FAX/TEL switching
See FAX/TEL switching.
Automatic dialing
Dialing fax or telephone numbers by pressing one or three buttons. To use automatic dialing, you must
register the numbers in the machine’s memory. See also One-Touch Speed Dialing, Coded Speed Dialing,
and Group Dialing.
Automatic Document Feeder (ADF)
The device included in the machine that feeds the document being faxed, copied, or scanned into the
machine.
Automatic image reduction
The machine can print the date, time, company name, and a fax number at the top of the faxes it receives. To
prevent this information from crowding the faxed image on the page and possibly lengthening the fax, the
machine automatically reduces the size of the image on the page.
Automatic redialing
When the receiving fax machine is busy or does not answer, or when an error occurs while sending, the
machine waits a specified time and then automatically redials the number. If the receiving fax is still busy or
does not answer, the machine waits the specified time and dials again. If the fax still does not go through, the
machine prints an error TX report.
G-1
B
bps
Bits per second. Refers to the speed with which a fax machine sends and receives data.
Broadcasting
Transmitting documents to more than one location (through the machine’s memory).
C
CCITT/ITU-T
Formerly known as CCITT, Consultative Committee for International Telegraph and Telephone. CCITT has
been replaced by the International Telecommunications Union-Telecommunications sector (ITU-T), a
committee created to set international standards for telecommunications.
CNG
Calling Tone. This is a signal sent by fax machines to identify the call as an incoming document. When the
receiving fax detects this signal, it automatically starts to receive the fax transmission. The majority of fax
machines in use today can send and detect CNG signals.
Coded Speed Dialing
An automatic dialing method that allows you to dial a fax or telephone number by pressing [Coded Dial] and a
two-digit code (a three-digit code for the FAX-L390 model) using the numeric buttons.
Cursor
The underline symbol you see on the LCD display when you register numbers and names in the machine.
Press [ (-)] or [ (+)] to move the cursor.
D
Delayed sending
The ability to send a document at a preset time in the future. You do not have to be in your office to use
delayed sending to one or more destinations. (You can set up only one delayed transmission at a time on the
machine.)
Dialing methods
Ways of pressing one or more buttons to access a number to connect to an outside party or fax machine.
Dialing methods include One-Touch, Coded Speed Dialing, Group Dialing, Directory Dialing, and regular
dialing with the numeric buttons.
Document
The sheet of paper containing the data that you send to, or receive from a machine.
dpi
Glossary
Dots per inch. A machine of measurement for indicating a machine’s resolution. Your machine produces a
resolution of 1200 dpi enhanced × 600 dpi.
Dual access (Multitasking)
Enables the machine to receive a fax, even if it is copying or printing a document. Also enables you to load
other faxes into memory, make copies, print out reports, print documents or register information while the
machine sends a fax from memory.
G
G-2
E
ECM
Error Correction Mode. The ability of your machine to reduce system and line errors when sending or
receiving from another fax with ECM capability. ECM is most effective in areas where the telephone lines are
in poor condition or there is frequent interference on the line. Do not use ECM if you need to send a
document quickly and you are sure the other party can read your transmission without it (turning off ECM
also turns off MMR).
Extension
A telephone connected to the machine that is used in place of the handset. You can use the extension
telephone to activate incoming reception of documents manually.
F
FAX/TEL switching
This option allows you to set the machine to automatically detect whether a call is from a fax or telephone. If
the call is from another fax, the transmission is automatically received. If the call is from a telephone, the
machine rings to let you know, so you can pick up the handset. With this feature, one telephone line can be
shared by both the telephone and the fax.
FINE
The resolution setting for documents with very small characters and lines.
G
G3, Group 3 fax machine
Defined by CCITT/ITU-T. Uses encoding schemes to transmit image data while reducing the amount of data
that needs to be transmitted, thus reducing transmission time. G3 fax machines can transmit one page in less
than one minute. Encoding schemes for G3 fax machines are Modified Huffman (MH), Modified READ (MR),
and Modified Modified READ (MMR).
Grayscale
Representing color in black and white as a result of different intensities of color. Different colors and
intensities of colors appear as different shades of gray.
Group Dialing
A dialing method that enables you to dial registered One-Touch Speed Dialing or Coded Speed Dialing
numbers together as a group. This means that you can press just one or a few buttons to enter numbers
when sending the same document to many destinations.
H
Halftone
Glossary
Using this method, the machine produces shades of gray by mapping dots to be printed.
G
G-3
I
Interface
The connection between two devices that makes it possible for them to communicate with each other. The
machine features a USB interface, which makes it compatible with IBM and similar personal computers.
Interface cable
The cable used to create the interface between a printer and a computer.
Interface port
The machine comes with one USB port, located on the back of the machine. You attach the cable that
connects your computer and machine to this port.
J
Jack
The telephone receptacles on your wall or on your machine used to connect the machine to the telephone
line, answering machine, handset, or telephone.
M
Manual receiving
A method of receiving faxes in which you answer all incoming calls using the optional handset. If you hear a
slow beep it indicates an incoming fax transmission from another machine. Just press [Start] to receive the
incoming fax.
Manual redialing
When you use regular dialing, you can redial a number manually simply by pressing [Redial/Pause] on the
operation panel. The last number called is the number redialed.
Memory broadcast
Allows you to send a scanned fax to two or more destinations at once, using a combination of One-Touch
Speed Dialing, Coded Speed Dialing, and regular dialing.
Memory sending
Scans a document into memory before the machine dials the number(s) and sends it. This method allows you
to retrieve your original document immediately after scanning.
Modem
A device that converts (MOdulates) digital data for transmission over telephone lines. At the receiving end,
this device converts the modulated data (DEModulates) to digital format that the computer understands.
N
Glossary
Noise
A term applied to a variety of problems that impair the operation of telephone lines used for faxing.
Numeric buttons
The round, numbered buttons on the operation panel marked the same as a standard telephone keypad.
Press them to perform regular dialing. You also use the numeric buttons to enter numbers and letters when
you register numbers and names, and for entering Coded Speed Dialing codes.
G
G-4
O
One-Touch Speed Dialing
An automatic dialing method that allows you to dial a fax or telephone number by pressing a single
One-Touch Speed Dial button. The machine can store up to 32 numbers for One-Touch Speed Dialing.
One-Touch Speed Dial buttons
The buttons numbered 01 to 32 on the operation panel, each of which may be registered as a fax or
telephone number. Once a number is registered, you press one button to dial the entire number.
P
Paper feed
Refers to guiding a sheet of paper into the machine’s paper path.
Pause
A timing entry required for registering certain long distance numbers and for dialing out through some
telephone systems or switchboards. Pressing [Redial/Pause] enters a pause between digits of a telephone
number.
Photo
The document setting you use for sending or copying documents with intermediate tones, such as
photographs.
Polling
One fax machine requesting another to send a document. The receiving party calls the fax machine holding
the document to be sent, and requests that it be sent.
Printable area
The area of a sheet of paper on which a printer can reproduce text or graphics (the printing area is smaller
than the paper). On this machine, the printing area varies depending on the type of paper being used.
Printer driver
The printer driver allows you to use the machine as a printer for your PC with Windows 98, Windows Me,
Windows 2000, or Windows XP installed. To use the machine as a printer, install the supplied printer driver in
your PC.
Pulse
See Rotary pulse.
R
RAM
Glossary
Random Access Memory. Memory that is used for temporary storage of information such as: documents you
want to print, scanned and received documents, and downloaded fonts.
Receive mode
The button that controls how the machine receives fax and telephone calls.
Receiving
Receiving transmission is also defined as RX or Reception. The machine can be customized to receive fax
documents in many ways:
• Receive fax documents only (FaxOnly Mode)
• Receive both telephone calls and fax documents on the same line (FaxTel Mode)
• Receive telephone calls and fax documents manually (Manual Mode)
• Receive fax documents automatically and route voice calls to the answering machine (AnsMode)
G-5
G
Reception
See Receiving.
Redialing-automatic
See Automatic Redialing.
Redialing-manual
See Manual Redialing.
Reduction mode
The machine’s automatic feature that slightly reduces the received image to allow room at the top of the page
for the sender’s ID information. You can also reduce the size of large incoming documents using the <RX
REDUCTION> option.
Registering
A process by which you place fax or telephone numbers and names in the machine’s memory for automatic
dialing so that you can save time dialing frequently called destinations.
Regular dialing
Pressing the individual numeric buttons to dial a fax or telephone number.
Remote receiving ID
The two-digit code that enables you to manually activate fax reception using a telephone that is connected to
the machine.
Remote reception
Activating fax reception by answering a telephone that is connected to the machine, but that is not located
near the machine. You need to dial a remote receiving ID number to start remote reception.
Report
A document printed by the machine and containing information about the faxes it has sent or received.
Resolution
The density of dots for any given output device. Expressed in terms of dots per inch (dpi). Low resolution
causes font characters and graphics to have a jagged appearance. Higher resolution means smoother curves
and angles as well as a better match to traditional typeface designs. Resolution values are represented by
horizontal data and vertical data, for example, 360 × 360 dpi. This machine produces output with
1200 dpi enhanced × 600 dpi precision.
Rotary pulse
A telephone dialing system where a dial is rotated to send pulses to the telephone switching system. When
you pulse dial, you hear clicks. When you touch-tone dial, the most common dialing system, you hear tones.
Rotary pulse dialing requires certain setting adjustments.
RX
See Receiving.
Glossary
S
Scanning contrast
A setting that darkens or lightens the scanning of documents.
Sender ID
G
Information printed at the top of a fax (also called TTI or Transmit Terminal ID):
• Date and time the fax was sent
• Sender’s fax/phone number
• Sender’s name
• Your name or company name
• Page number
G-6
Sending
A fax document that has been scanned by a fax machine and sent over telephone lines, in the form of
electrical pulses, to another fax machine. Also called TX or Transmit.
Sending speed
The rate at which faxes are transmitted through the phone line. See also bps (bits per seconds).
STANDARD
A document setting for sending normal typewritten or printed documents containing only text and no
drawings, photographs, or illustrations.
Standby
The mode in which the machine is on and ready to use.
T
Timed sending
See Delayed sending.
Tone
A button that allows you to temporarily switch to touch-tone from pulse dialing. In some countries, on-line
data services may require that you use tone dialing.
Tone/pulse setting
The ability to set the machine to match the telephone dialing system your telephone line uses: touch-tone or
rotary pulse.
Toner
A black, resin coated powder contained in the toner cartridge. The machine applies the toner to the surface of
the photosensitive drum inside the machine via an electrophotographic mechanism.
Toner saver
You can enable or disable economy printing (toner saving feature). By enabling the TONER SAVER MODE
setting, toner consumption can be decreased by approx. 30%, resulting in a longer effective cartridge life.
Transaction number
A unique number assigned to each fax document sent (TX NO.) or received (RX NO.) by the machine and
used to identify that particular fax document.
Transmit
See Sending.
TTI
Transmit Terminal ID. See Sender ID.
TX
Glossary
See Sending.
U
UHQ™ (Ultra High Quality)
An exclusive Canon digital image processing system that incorporates 256 shades of gray along with a
special edge enhancement feature which ensures that text and photos are transmitted with ultimate clarity.
G-7
G
Index
Numerics
APPENDIX
Activity Report, 12-1
ADD. REGISTRATION, 15-14
ADF (Automatic Document Feeder), 2-11, 2-12
Alarm indicator, 2-14
AnsMode, 7-1, 7-5
Answering machine
using, 7-5
Attaching components
document output tray, 2-5
output tray, 2-5
Coded Speed Dialing, 5-1, 6-7
changing or deleting numbers, 5-6
storing numbers, 5-5
using, 5-7
Collate copy, 1-3, 10-8
COMMON SETTINGS, 15-3
Connection
power cord, 2-8
telephone line, 2-8
USB port, 2-7
COPY button, 2-14
COPY SETTINGS, 15-5
COPY STATUS, 11-1
Copying, 10-1
enlarging/reducing, 10-4
specifying the paper size, 10-2
specifying the paper type, 10-3
Custom copy ratio, 10-5
B
D
Broadcasting, 6-13
Delayed sending, 6-15
Delayed Transmission button, 2-15
Delete button, 2-15
Destination labels, 2-2
Directory button, 2-15
Directory Dialing, 5-1, 6-7
using, 5-13
Document
loading in the ADF, 6-3
requirements, 6-1
scanning area, 6-2
Document feeder tray, 2-11, 2-12
Document Memory List, 12-11
((-), )(+) buttons, 2-15
A
C
Canceling
automatic redialing, 6-11
incoming fax, 7-7
memory sending, 6-10
restriction, 9-5
Cartridge W, 2-4
Cassette, 2-11, 2-12
loading envelopes, 4-5
loading paper, 2-22, 4-3
CD-ROM, 2-2
CHANGE PAPERSIZE message, 13-8
CHECK DOCUMENT message, 13-8
CHECK PRINTER message, 13-8
Clear button, 2-15
Coded Dial button, 2-15
Coded Speed Dial List, 12-8
Document output tray, 2-11, 2-12
attaching, 2-5
DOCUMENT TOO LONG message, 13-8
DOCUMENTATION, 2-2
I-1
E
I
Energy Saver button, 2-14
Energy saver mode
restoring from, 2-16
setting manually, 2-16
Image Quality button, 2-14
In Use/Memory indicator, 2-14
INCORRECT PAPER SIZE message, 13-8
INSTALL CARTRIDGE message, 13-8
Enlarge/Reduce button, 2-14
Entering
date and time, 3-3
method, 3-1
numbers for Coded Speed Dialing, 5-5
numbers for Group Dialing, 5-9
numbers for One-Touch Speed Dialing, 5-2
your fax number and name, 3-4
Envelope
loading in the cassette, 4-5
loading in the multi-purpose feeder, 4-9
Error Codes, 13-11
Error Correction Mode (ECM), 1-2
Error TX Report, 12-2
Exposure button, 2-14
Extension cover, 2-13
Extension phone jack, 2-13
F
F/T RING TIME, 7-2
F/T SWITCH ACTION, 7-2
FAX button, 2-14
FAX MONITOR, 11-1
FAX SETTINGS, 15-6
FaxOnly Mode, 7-1, 7-5
FaxTel Mode, 7-1, 7-2, 7-3
setting options, 7-2
Front view, 2-11
G
Group Dial List, 12-9
Group Dialing, 5-1, 6-7
changing or deleting numbers, 5-10
storing numbers, 5-9
using, 5-12, 6-14
Index
H
I
Handset, B-1
manual sending, 6-6, 6-9
Handset jack, 2-13
HANG UP PHONE message, 13-8
Hook button, 2-15
I-2
L
LCD display, 2-14
LCD Messages, 13-8
Long distance dialing, 9-2
M
Maintenance
cleaning, 14-1
handset, B-4
MAKING SPACE IN MEM message, 13-9
Manual Mode, 7-1, 7-4
Manual sending, 6-6, 6-9
MEM IN USE nn % message, 13-9
Memory Clear Report, 12-5
MEMORY FULL message, 13-9
Memory Lock, 9-6
password, 9-6
Memory receiving, 7-6
Memory sending, 6-6, 6-8
canceling, 6-10
redialing automatically, 6-11
Menu button, 2-14
Menu System, 15-1
Multi TX/RX Report, 12-3
Multi-purpose feeder, 2-11, 2-12
loading envelope, 4-9
loading paper, 4-8
Multitasking, 7-7
N
NET SWITCH, C-1
NOT REGISTERED message, 13-9
Numeric buttons, 2-14
R
OK button, 2-15
One-Touch Speed Dial buttons, 2-15
One-Touch Speed Dial List, 12-7
One-Touch Speed Dial panel, 2-15
One-Touch Speed Dialing, 5-1, 6-7
changing or deleting numbers, 5-3
storing numbers, 5-2
using, 5-4
Operation panel, 2-11, 2-12, 2-14
Orientation, 4-11
Output tray, 2-11, 2-12
R button, 2-15
Rear cover, 2-13
Rear view, 2-13
REC. PAPER JAM message, 7-6, 13-9
Receive mode
AnsMode, 7-1
FaxOnly, 7-1
FaxTel, 7-1
Manual, 7-1
setting, 7-2
Receive Mode button, 2-15
RECEIVED IN MEMORY message, 13-9
Recording paper
loading in the cassette, 2-22, 4-3
loading in the multi-purpose feeder, 4-8
printing areas, 4-2
requirements, 4-1
Redial/Pause button, 2-15
Redialing
automatically, 6-11
canceling, 6-11
manually, 6-11
setting up, 6-11
Regular Dialing, 6-7
REMOVE MP PAPER message, 13-9
Removing Jammed Paper from the ADF, 13-7
REPLACE CARTRIDGE message, 13-9
Report button, 2-15
REPORT STATUS, 11-1
Reserve copy, 10-9
Restriction
canceling, 9-5
enabling, 9-4
RING START TIME, 7-2
Ringer Volume Switch, B-4
RX Report, 12-4
P
Paper cassette
installing, 2-6
Paper jam
clearing, 13-1
Paper output area
face down, 4-13
face up, 4-13
guidelines, 4-12
selecting, 4-12
PAPER SETTINGS, 15-2
PBX, 9-1
Polling
receiving, 8-2
sending, 8-3
Polling box
changing settings, 8-5
deleting, 8-6
scanning document into the memory, 8-4
setting up, 8-3
Polling button, 2-15
Power Cord, 2-2
connecting, 2-8
Power socket, 2-13
Preset copy ratio, 10-4
PRINT LISTS, 15-16
PRINT STATUS, 11-1
Printer cover, 2-11, 2-12
PRINTER DATA ERROR message, 13-9
Printer driver, 1-4
PRINTER SETTINGS, 15-14
Index
O
I
I-3
S
U
Safety instructions, 1-6
Scanning density
adjusting to copy, 10-6
adjusting to fax, 6-5
Unpacking, 2-2
USB port, 2-13
connecting, 2-7
User’s Data List, 12-10
Scanning resolution
adjusting to copy, 10-6
adjusting to fax, 6-4
Setting
display language, 2-10
receive mode, 7-2
scanning density (fax), 6-5
scanning resolution (fax), 6-4
summer time, 3-5
telephone line type, 3-5
Shipping Materials
removing, 2-3
Slide guides, 2-11, 2-12
Space button, 2-15
Specifications, A-1
Speed Dialing Lists, 12-6
START AGAIN message, 13-9
Start button, 2-15
Stop/Reset button, 2-15
Summer time
setting, 3-5
SUPPLY REC. PAPER message, 7-6, 13-9
Switchboard, 9-1
SYSTEM ERROR message, 13-10
System Monitor button, 2-14
Index
T
Telephone line
connecting, 2-8
Telephone Line Cord, 2-2
Telephone line jack, 2-13
Telephone line type
setting, 3-5
TIMER SETTINGS, 15-15
Tone button, 2-14
Tone dialing, 9-3
Toner cartridge
handling and storing, 2-17
installing and replacing, 2-18
Transfer roller, 13-2
Transporting, 14-5
TTI, 3-3
TX Report, 12-3
TX/RX NO. nnnn message, 13-10
I
I-4
CANON INC.
30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
CANON U.S.A., INC.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
CANON CANADA INC.
6390 Dixie Road Mississauga, Ontario L5T 1P7, Canada
CANON EUROPA N.V.
Bovenkerkerweg 59-61 1185 XB Amstelveen, The Netherlands
CANON FRANCE S.A.S.
17, quai du Président Paul Doumer 92414 Courbevoie Cedex, France
CANON COMMUNICATION & IMAGE FRANCE S.A.S.
12, rue de l’Industrie 92414 Courbevoie Cedex, France
CANON (U.K.) LTD.
Woodhatch, Reigate, Surrey, RH2 8BF, United Kingdom
CANON DEUTSCHLAND GmbH
Europark Fichtenhain A10, 47807 Krefeld, Germany
CANON ITALIA S.p.A.
Via Milano, 8 20097 San Donato Milanese (MI) Italy
CANON LATIN AMERICA, INC.
703 Waterford Way Suite 400, Miami, Florida 33126 U.S.A.
CANON AUSTRALIA PTY. LTD
1 Thomas Holt Drive, North Ryde, Sydney, N.S.W. 2113, Australia
CANON CHINA CO., LTD
15F, North Tower, Beijing Kerry Centre, 1 Guang Hua Road, Chao Yang District,
100020, Beijing, China
CANON SINGAPORE PTE. LTD.
1 HarbourFront Avenue #04-01 Keppel Bay Tower, Singapore 098632
CANON HONGKONG CO., LTD
19/F., The Metropolis Tower, 10 Metropolis Drive, Hunghom, Kowloon, Hong Kong
FA7-9077 (000)
© CANON INC. 2005
230V