Specifications | Canon MF4150 All in One Printer User Manual

Basic Guide
What Can I Do with This Machine?
Before Using the Machine
Document Handling
Print Media
Sending Faxes
Receiving Faxes
Copying
Printing
Scanning
PC Faxing
Maintenance
Troubleshooting
Machine Settings
Appendix
Please read this guide before operating this product.
After you finish reading this guide, store it in a safe place for future reference.
ENG
Manuals for the Machine
● Machine Set-Up
● Software Installation
●
●
●
●
Basic Features
Maintenance
Machine Settings
Specifications
● Advanced Features
● System Monitor
● Reports and Lists
Starter Guide
Basic Guide
(This Document)
Advanced Guide
CD-ROM
Scanner Driver Guide
CD-ROM
● Scanning Features
CD-ROM
Indicates the manual is supplied in PDF format in the accompanying CD-ROM.
● To view the manual in PDF format, Adobe Reader/Acrobat Reader/Acrobat is required. If Adobe
Reader/Acrobat Reader/Acrobat is not installed on your system, please download it from the Adobe
Systems Incorporated website (http://www.adobe.com).
● Considerable effort has been made to ensure that this manual is free of inaccuracies and omissions.
However, as we are constantly improving our products, if you need an exact specification, please
contact Canon.
● The machine illustration on the cover may differ slightly from your machine.
i
What Can I Do with This Machine?
What Can I Do with This
Machine?
Fax Features
Specify a recipient with a single key
One-Touch Speed Dialing
→ p. 4-7
Specify a recipient with a two-digit
code
Coded Dialing
→ p. 4-14
Specify multiple recipients with a
single key
Group Dialing
→ p. 4-21
Look up a particular recipient
Using Address Book
→ Advanced Guide
Redial when the line is busy
Redialing
→ Advanced Guide
ii
AAAAA
BBBBB
CCCCC
What Can I Do with This Machine?
Send a fax to multiple recipients
Broadcasting
→ Advanced Guide
Receive faxes in memory without
printing out
Memory Reception
→ Advanced Guide
Reject faxes without their numbers
Reception Restriction
→ Advanced Guide
iii
What Can I Do with This Machine?
Copy Features
Select a scan mode depending on
the type of image
Image Quality
→ p. 6-3
ABC
ABC
ABC
ABC
Adjust the density level of scanned
images
Density
→ p. 6-4
Enlarge or reduce copied images
A
Zoom Ratio
→ p. 6-6
Sorts copies by page order
Collate Copy
→ Advanced Guide
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
1 AAAA
AAAA
AAAA
1 AAAA
AAAA
AAAA
1
AAAA
1
AAAA
AAAA
BBBB
AAAA
BBBB
CCCC
AAAA
BBBB
CCCC
1DDDD
BBBB
CCCC
DDDD
2
CCCC
DDDD
3
DDDD
4
Make two-sided copies
Two-Sided Copying
→ Advanced Guide
iv
ABC
ABC
ABC
A B1 C
A
DEF
DEF
DEF
DE
F
2
DE
D EA
FB C
DE A
F BC
FA B C
A B1 C
Copy two documents on one sheet
2 on 1 Combination
ABC
ABC
ABC
ABC
1
DE F
DE F
DE F
DE
F
2
What Can I Do with This Machine?
→ Advanced Guide
ABC
ABC
DE F
ABC
DE F
ABC
DE
F
1
DE
F
2
Printer Feature
DE
D EA
FBC
D E FA BC
F A BC
A BC
1
Print a document from a PC
Printing
→ Online Help
Scanner Feature
Specify detailed scanning options
to suit various images
Scanning
ABC
ABC
ABC
ABC
→ Scanner Driver Guide
v
What Can I Do with This Machine?
PC Fax Feature
Send a fax from a PC
PC Faxing
→ Online Help
vi
Contents
Manuals for the Machine................................................................. i
What Can I Do with This Machine? ............................................... ii
Contents ........................................................................................ vii
Preface.......................................................................................... xiii
Important Safety Instructions .........................................xiii
Handling and Maintenance ............................................xiii
Location .........................................................................xiv
Power Supply................................................................. xv
Customer Support (U.S.A.)............................................xvi
Customer Support (Canada)..........................................xvi
How to Use This Guide............................................................... xvii
Symbols Used in This Manual ......................................xvii
vii
What Can I Do with This Machine?
Fax Features.................................................................... ii
Copy Features ................................................................ iv
Printer Feature................................................................. v
Scanner Feature .............................................................. v
PC Fax Feature .............................................................. vi
Legal Notices ............................................................................. xviii
What Can I Do with This Machine?
Copyright ..................................................................... xviii
Disclaimers .................................................................. xviii
Legal Limitations on the Usage of Your Product and the
Use of Images................................................................xix
Trademarks.................................................................... xx
Users in the U.S.A........................................................................ xxi
Pre-Installation Requirements for Canon Facsimile
Equipment......................................................................xxi
Connection of the Equipment .......................................xxii
In Case of Equipment Malfunction................................xxii
Rights of the Telephone Company .............................. xxiii
FCC Notice .................................................................. xxiii
Users in Canada.......................................................................... xxv
Pre-Installation Requirements for Canon Facsimile
Equipment.....................................................................xxv
Notice...........................................................................xxvi
Laser Safety ............................................................................. xxviii
CDRH Regulations .................................................... xxviii
1 Before Using the Machine ...................................................... 1-1
Machine Components .................................................................1-1
Operation Panel ...........................................................................1-4
Main Operation Panel ...................................................1-4
Facsimile Operation Panel............................................1-6
viii
LCD (Standby Mode) ...................................................................1-7
Fax Mode......................................................................1-7
Copy Mode ...................................................................1-7
Scan Mode....................................................................1-7
Toner Cartridge............................................................................1-8
Timer Settings............................................................................1-11
Setting the Sleep Mode ..............................................1-11
Setting Daylight Saving Time......................................1-14
2 Document Handling................................................................. 2-1
Document Requirements ............................................................2-1
Scanning Area..............................................................................2-3
Loading Documents ....................................................................2-4
On the Platen Glass......................................................2-4
In the ADF.....................................................................2-6
3 Print Media ............................................................................... 3-1
Paper Requirements....................................................................3-1
Printable Area ..............................................................................3-2
Paper Guidelines .........................................................................3-3
Loading Paper..............................................................................3-4
Into the Multi-Purpose Tray ..........................................3-4
Setting Paper Size and Type.......................................................3-7
ix
What Can I Do with This Machine?
Maintaining the Toner Cartridge ...................................1-9
Checking the toner level .............................................1-10
4 Sending Faxes ......................................................................... 4-1
Scan Settings ...............................................................................4-3
What Can I Do with This Machine?
Image Quality................................................................4-3
Density..........................................................................4-5
Speed Dialing ...............................................................................4-6
Registering Recipients for Speed Dialing .....................4-6
Using Speed Dialing ...................................................4-30
Manual Sending .........................................................................4-32
5 Receiving Faxes ...................................................................... 5-1
6 Copying .................................................................................... 6-1
Scan Settings ...............................................................................6-3
Image Quality................................................................6-3
Density..........................................................................6-4
Zoom Ratio ...................................................................6-6
7 Printing ..................................................................................... 7-1
8 Scanning .................................................................................. 8-1
9 PC Faxing ................................................................................. 9-1
x
10 Maintenance......................................................................... 10-1
Cleaning the Machine................................................................10-1
Replacing the Toner Cartridge .................................................10-8
Redistributing Toner ...................................................10-8
Replacing the Toner Cartridge with a New One .......10-10
Recycling Used Cartridges .....................................................10-12
The Clean Earth Campaign ......................................10-12
U.S.A. PROGRAM....................................................10-14
CANADA PROGRAM-CANADA PROGRAMME ......10-17
Transporting the Machine.......................................................10-19
11 Troubleshooting .................................................................. 11-1
Clearing Jams ............................................................................11-1
Document Jams..........................................................11-1
Paper Jams.................................................................11-3
LCD Messages ...........................................................................11-9
Common .....................................................................11-9
Facsimile...................................................................11-16
Printer .......................................................................11-19
xi
What Can I Do with This Machine?
Exterior .......................................................................10-1
Interior.........................................................................10-2
Fuser Roller ................................................................10-4
Scanning area.............................................................10-5
Error Codes ..............................................................................11-20
If You Cannot Solve a Problem ..............................................11-21
What Can I Do with This Machine?
Customer Support (U.S.A.).......................................11-21
Customer Support (Canada).....................................11-21
12 Machine Settings ................................................................. 12-1
Machine Settings .......................................................................12-1
Printing User’s Data List .............................................12-1
Accessing the Setting Menu .......................................12-3
Setting Menu ..............................................................................12-5
PAPER SETTINGS ....................................................12-5
COMMON SETTINGS ...............................................12-5
COPY SETTINGS ......................................................12-6
TIMER SETTINGS .....................................................12-7
FAX SETTINGS .........................................................12-8
BROADCAST ..........................................................12-12
ADDRESS BOOK SET. ...........................................12-12
ADJUST./CLEANING ..............................................12-13
REPORT SETTINGS ...............................................12-14
13 Appendix .............................................................................. 13-1
Specifications ............................................................................13-1
General .......................................................................13-1
Copier .........................................................................13-2
Printer .........................................................................13-3
Facsimile.....................................................................13-3
Telephone...................................................................13-5
Index ...........................................................................................13-6
xii
Preface
Thank you for choosing a Canon product. Before using the machine, please read
the following instructions for your safety.
WARNING
Except as specifically described in this guide, do not attempt to service the machine yourself. Never
attempt to disassemble the machine: opening and removing its interior covers will expose you to
dangerous voltages and other risks. For all service, contact Canon Customer Care Center, or a Canon
Authorized Service Facility.
Handling and Maintenance
–
–
–
–
–
–
–
–
–
–
–
Follow all warnings and instructions marked on the machine.
Do not subject the machine to strong physical shocks or vibrations.
Always unplug the machine before moving or cleaning it.
To avoid paper jams, never unplug the power cord, open the scanning platform, or
add or remove paper in the machine while printing.
When transporting the machine, be sure to remove the toner cartridge from the
machine.
Place the toner cartridge in its original protective bag or wrap it in a thick cloth to
prevent exposure to light.
Always grip the handle on the sides of the machine when you lift the machine. Never
lift the machine by any of its trays or attachments.
Do not insert any objects into the slots or openings on the machine since they may
touch dangerous voltage points or short out parts. This could result in fire or electric
shock.
Do not allow small objects (such as pins, paper clips, or staples) to fall into the
machine.
To avoid spillage in or around the machine, do not eat or drink near it.
Keep the machine clean. Dust accumulation can prevent the machine from operating
properly.
xiii
What Can I Do with This Machine?
Important Safety Instructions
What Can I Do with This Machine?
– Turn off the main power switch and unplug the power cord from the wall outlet and
contact Canon Customer Care Center in any of the following cases:
– When the power cord or plug is damaged or frayed.
– If liquid or small object has fallen into the machine.
– If the machine has been exposed to rain or water.
– If the machine does not operate normally when you have followed the instructions
in this guide. Adjust only those controls that are covered by the instructions in this
guide. Improper adjustment of other controls may result in damage and may
require extensive work by a qualified technician to restore the product to normal
operation.
– If the machine has been dropped.
– If the machine exhibits a distinct change in performance, indicating a need for
servicing.
Location
– Place the machine on a flat, stable, vibration-free surface that is strong enough to
support its weight.
– Place the machine in a cool, dry, clean, well ventilated place.
– Make sure the area is free from dust.
– Make sure the location is not exposed to high temperature or humidity.
– Keep the machine away from direct sunlight as this can damage it. If you have to
place the machine near a window, install heavy curtains or blinds.
– Do not use the machine near water. Make sure that no wet or humid objects come
into contact with the machine.
– Do not use or store the machine outdoors.
– Do not place the machine near devices that contain magnets or generate magnetic
fields, such as speakers.
xiv
Power Supply
– During electrical storms, turn off the main power switch and unplug the power cord
from the power outlet.
(Please note that any documents stored in the machine’s memory will be deleted
when you unplug the power cord.)
– Whenever you turn off the main power switch, wait at least five seconds before you
turn it on again.
– Do not plug the power cord into an uninterruptible power supply (UPS).
WARNING
This product emits low level magnetic flux. If you use a cardiac pacemaker and feel abnormalities, please
move away from this product and consult your doctor.
xv
What Can I Do with This Machine?
– If possible, place the machine near an existing telephone line outlet for easy
connection of the telephone line cord, and to avoid the expense of installing a new
outlet.
– Place the machine near a standard 120 V AC (60 Hz) power outlet.
– To ensure reliable operation of the machine and to protect it from overheating (which
can cause it to operate abnormally and create a fire risk), do not block the exhaust
vent. Never block or cover any openings on the machine by placing it on a bed, sofa,
rug, or other similar surface. Do not place the machine in a cupboard or built-in
installation, or near a radiator or other heat source unless proper ventilation is
provided. Leave enough space around all sides of the machine.
– Do not stack boxes or furniture around the power outlet. Keep the area free so you
can reach the outlet quickly. If you notice anything unusual (smoke, strange odors,
noises) around the machine, unplug the power cord immediately. Contact Canon
Customer Care Center.
– Do not allow anything to rest on the power cord, and do not place the machine where
the cord will be walked on. Make sure the cord is not knotted or kinked.
What Can I Do with This Machine?
Customer Support (U.S.A.)
Your machine is designed with the latest technology to provide trouble-free operation. If
you encounter a problem with the machine’s operation, try to solve it by using the
information in Chapter 11. If you cannot solve the problem or if you think your machine
needs servicing, contact Canon Customer Care Center at 1-800-828-4040 between
the hours of 8:00 A.M. to 8:00 P.M. EST Monday through Friday and 10:00 A.M. to
8:00 P.M. on Saturday. On-line support for 24 hours is also available at the website.
http://www.canontechsupport.com/
Customer Support (Canada)
Canon Canada Inc., offers a full range of customer technical support options*:
– For step-by-step troubleshooting, e-mail technical support, the latest driver or
document downloads, and answers to frequently asked questions, visit
http://www.canon.ca/
– Free live technical support 9 A.M. to 8 P.M. EST Monday through Friday (excluding
holidays) for products still under warranty 1-800-652-2666
– For the location of the authorized service facility nearest you, visit
http://www.canon.ca/ or 1-800-652-2666
– If the problem cannot be corrected by using one of the above technical support
options, repair options are available at the time of your call to the live technical
support number above or via the website at http://www.canon.ca/
* Support program specifics are subject to change without notice.
xvi
How to Use This Guide
Symbols Used in This Manual
WARNING
Indicates a warning that may lead to death or serious injury if not
observed.
CAUTION
Explains how to avoid actions that could injure you or damage your
machine.
NOTE
Explains operating restrictions and how to avoid minor difficulties.
In addition, this guide uses distinctive notations to identify keys and information in the
LCD:
– The keys you press appear in square brackets: [Stop/Reset].
– Information in the LCD appears in angle brackets: <LOAD PAPER>.
The numbers that point to the keys on the operation panel diagram correspond to the
order of steps to take in the procedure.
xvii
What Can I Do with This Machine?
The following symbols are used throughout the manuals for the machine and indicate
the warnings, cautions and notes you should keep in mind when using the machine.
Legal Notices
What Can I Do with This Machine?
Copyright
Copyright © 2006 by Canon Inc. All rights reserved. No part of this publication may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any
language or computer language in any form or by any means, electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise, without the prior written permission
of Canon Inc.
Disclaimers
The information in this document is subject to change without notice.
CANON INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS
MATERIAL, EITHER EXPRESS OR IMPLIED, EXCEPT AS PROVIDED HEREIN,
INCLUDING WITHOUT LIMITATION, THEREOF, WARRANTIES AS TO
MARKETABILITY, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
OF USE OR NON-INFRINGEMENT. CANON INC. SHALL NOT BE LIABLE FOR ANY
DIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR
LOSSES OR EXPENSES RESULTING FROM THE USE OF THIS MATERIAL.
xviii
Legal Limitations on the Usage of Your Product and the
Use of Images
–
–
–
–
Paper Money
Money Orders
Certificates of Deposit
Postage Stamps (canceled or
uncanceled)
– Identifying Badges or Insignias
–
–
–
–
Travelers Checks
Food Stamps
Passports
Immigration Papers
– Selective Service or Draft Papers
– Internal Revenue Stamps (canceled or
uncanceled)
– Bonds or Other Certificates of
Indebtedness
– Stock Certificates
– Checks or Drafts Issued by
Governmental Agencies
– Motor Vehicle Licenses and Certificates – Copyrighted Works/Works of Art
of Title
without Permission of Copyright Owner
xix
What Can I Do with This Machine?
Using your product to scan, print or otherwise reproduce certain documents, and the
use of such images as scanned, printed or otherwise reproduced by your product, may
be prohibited by law and may result in criminal and/or civil liability.
A non-exhaustive list of these documents is set forth below. This list is intended to be a
guide only. If you are uncertain about the legality of using your product to scan, print or
otherwise reproduce any particular document, and/or of the use of the images
scanned, printed or otherwise reproduced, you should consult in advance with your
legal advisor for guidance.
Trademarks
Canon, the Canon logo, and imageCLASS are trademarks of Canon Inc.
All other product and brand names are registered trademarks, trademarks or service
marks of their respective owners.
What Can I Do with This Machine?
As an ENERGY STAR Partner, Canon U.S.A., Inc. has determined that
this product meets the ENERGY STAR Program for energy efficiency.
The International ENERGY STAR Office Equipment Program is an
international program that promotes energy saving through the use of
computers and other office equipment.
The program backs the development and dissemination of products
with functions that effectively reduce energy consumption. It is an
open system in which business proprietors can participate voluntarily.
The targeted products are office equipment, such as computers,
displays, printers, facsimiles, and copiers. The standards and logos
are uniform among participating nations.
xx
Users in the U.S.A.
What Can I Do with This Machine?
Pre-Installation Requirements for Canon Facsimile
Equipment
A. Location
Supply a suitable table, cabinet, or desk. See p. 13-1 for the machine’s weight and
dimensions.
B. Order Information
1. Only a single line, touch-tone or rotary telephone set is to be used.
2. Order an RJ11-C modular jack (USOC code), which should be installed by the
telephone company. If the RJ11-C jack is not present, installation cannot occur.
3. Order a regular voice grade line or the equivalent from your telephone company’s
business representative.
Use one line per machine.
DDD (DIRECT DISTANCE DIAL) LINE
-orIDDD (INTERNATIONAL DIRECT DISTANCE DIAL) LINE IF YOU COMMUNICATE
OVERSEAS
NOTE
Canon recommends an individual line following industry standards, e.g. the 2500 (Touch Tone) or
500 (Rotary/Pulse Dial) telephones. A dedicated extension off a PBX machine without “Call Waiting”
can be used with the machine. Key telephone systems are not recommended because they send
non-standard signals to individual telephones for ringing and special codes, which may cause a fax
error. This machine is not supported on Voice Over Internet Protocol (VOIP).
C. Power Requirements
This equipment should be connected to a standard 120-volt AC, three-wire grounded
outlet only. Do not connect this machine to an outlet or power line shared with other
appliances that cause “electrical noise.” Air conditioners, electric typewriters, copiers, and
machines of this sort generate electrical noise which often interferes with communications
equipment and the sending and receiving of documents.
xxi
What Can I Do with This Machine?
Connection of the Equipment
This equipment complies with Part 68 of the FCC rules and the requirements adopted
by the ACTA. On the rear panel of this equipment is a label that contains, among other
information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this
number must be provided to the telephone company.
An FCC compliant telephone cord and modular jack are provided with this equipment.
This equipment is designed to be connected to the telephone network or premises
wiring using a compatible modular jack which is Part 68 compliant. See the Starter
Guide for details.
The Ringer Equivalence Number (REN) is used to determine the number of devices
that may be connected to a telephone line. Excessive RENs on a telephone line may
result in the devices not ringing in response to an incoming call. In most but not all
areas, the sum of RENs should not exceed five (5.0). To be certain of the number of
devices that may be connected to a line, as determined by the total RENs, contact the
local telephone company. The REN for this product is part of the product identifier that
has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN
without a decimal point (e.g., 10 is a REN of 1.0).
This equipment may not be used on coin service provided by the telephone company.
Connection to party lines is subjected to state tariffs.
In Case of Equipment Malfunction
Should any malfunction occur which cannot be corrected by the procedures described
in this guide, disconnect the equipment from the telephone line and unplug the power
cord. The telephone line should not be reconnected or the power cord plugged in until
the problem is completely resolved. Users should contact Canon Authorized Service
Facilities for servicing of equipment. Information regarding Authorized Service Facility
locations can be obtained by calling Canon Customer Care Center (1-800-828-4040).
xxii
Rights of the Telephone Company
FCC Notice
imageCLASS MF4150: Model F149200
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept an interference received, including interference that may
cause undesired operation.
NOTE
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
xxiii
What Can I Do with This Machine?
Should the equipment cause harm to the telephone network, the telephone company
may temporarily disconnect service. The telephone company also retains the right to
make changes in facilities and services which may affect the operation of this
equipment. When such changes are necessary, the telephone company is required to
give adequate prior notice to the user.
What Can I Do with This Machine?
Use of shielded cable is required to comply with class B limits in Subpart B of Part 15
of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise
specified in this manual. If such changes or modifications should be made, you could
be required to stop operation of the equipment.
Canon U.S.A., Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
TEL No. 1-516-328-5600
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to
use a computer or other electronic device to send any message via a telephone fax
machine unless such message clearly contains in a margin at the top or bottom of
each transmitted page or on the first page of the transmission, the date and time it is
sent and an identification of the business or other entity, or other individual sending the
message and the telephone number of the sending machine or such business, other
entity, or individual.
In order to program this information into the machine, follow the instructions in the
Starter Guide.
xxiv
Users in Canada
A. Location
Supply a suitable table, cabinet, or desk. See p. 13-1 for the machine’s weight and
dimensions.
B. Order Information
1. Provide only a single-line to touch-tone or rotary telephone set terminated with a
standard 4-pin modular phone plug. (Touch-tone is recommended if available in your
area.)
2. Order an CA11A modular jack (USOC code), which should be installed by the
telephone company. If the CA11A jack is not present, installation cannot occur.
3. Order a normal business line from your telephone company’s business representative.
The line should be a regular voice grade line or equivalent. Use one line per machine.
DDD (DIRECT DISTANCE DIAL) LINE
-orIDDD (INTERNATIONAL DIRECT DISTANCE DIAL) LINE IF YOU COMMUNICATE
OVERSEAS
NOTE
Canon recommends an individual line following industry standards, e.g., the 2500 (touch tone) or
500 (rotary/pulse dial) telephones. A dedicated extension off a PBX machine without “Camp On”
signals is also permissible with the machine. Key telephone systems are not recommended because
they send non-standard signals to individual telephones for ringing and special codes, which may
cause a fax error.
C. Power Requirements
The power outlet should be a three-prong grounded receptacle (Single or Duplex). It
should be independent from copiers, heaters, air conditioners or any electric equipment
that is thermostatically controlled. The rated value is 120 volts and 15 amperes. The
CA11A modular jack should be relatively close to the power outlet to facilitate installation.
xxv
What Can I Do with This Machine?
Pre-Installation Requirements for Canon Facsimile
Equipment
What Can I Do with This Machine?
Notice
This equipment meets the applicable Industry Canada Terminal Equipment Technical
Specifications. This is confirmed by the registration number. The abbreviation, IC,
before the registration number signifies that registration was performed based on a
Declaration of Conformity indicating that Industry Canada technical specifications were
met. It does not imply that Industry Canada approved the equipment.
Cet appareil est conforme aux Spécifications techniques des équipements terminaux
de I’lndustrie du Canada.
Ceci est confirmé par le numéro d’enregistrement. L’abréviation IC précédant le
numéro d’enregistrement signifie que I’enregistrement a été effectué sur la base de la
Déclaration de conformité indiquant que le produit est conforme aux spécifications
techniques du Canada. Ceci n’implique pas que le produit ait été approuvé par
I’industrie du Canada.
Before installing this equipment, users should ensure that it is permissible to be
connected to the facilities of the local telecommunications company. The equipment
must also be installed using an acceptable method of connection. The customer
should be aware that compliance with the above conditions may not prevent
degradation of service in some situations.
Repairs to certified equipment should be coordinated by a representative designated
by the supplier. Any repairs or alterations made by the user to this equipment, or
equipment malfunctions, may give the telecommunications company cause to request
the user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground connections of
the power utility, telephone lines and internal metallic water pipe system, if present, are
connected together. This precaution may be particularly important in rural areas.
xxvi
CAUTION
Users should not attempt to make such connections themselves, but should contact the appropriate
electric inspection authority, or electrician, as appropriate.
NOTE
The Ringer Equivalence Number (REN) for this terminal equipment is 1.0. The REN
assigned to each terminal equipment provides an indication of the maximum number of
terminals allowed to be connected to a telephone interface. The termination on an
interface may consist of any combination of devices subject only to the requirement
that the sum of the Ringer Equivalence Numbers of all the devices does not exceed
five.
Le Nombre d’équivalence Ringer (REN) de cet appareil terminal est 1.0. Le REN
attribué à chaque équipement terminal fournit une indication sur le nombre maximum
de terminaux pouvant être connectés sur une interface téléphonique. La terminaison
sur une interface peut consister en n’importe quelle combinaison d’appareils, à la
condition seulement que la somme des Nombres d’équivalence Ringer de tous les
appareils ne soit pas supérieure à 5.
CANON CANADA INC.
1-800-652-2666
9 A.M. to 8 P.M. EST Monday through Friday (excluding holidays)
xxvii
What Can I Do with This Machine?
This Class B digital apparatus meets all requirements of the Canadian Interference- Causing Equipment
Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel
brouilleur du Canada.
What Can I Do with This Machine?
Laser Safety
This machine complies with 21 CFR Chapter 1 Subchapter J as a Class 1 laser
product under the U.S. Department of Health and Human Services (DHHS) Radiation
Performance Standard according to the Radiation Control for Health and Safety Act of
1968. This means that the machine does not produce hazardous radiation.
Since radiation emitted inside the machine is completely confined within protective
housings and external covers, the laser beam cannot escape from the machine during
any phase of user operation.
CDRH Regulations
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug
Administration implemented regulations for laser products on August 2, 1976. These
regulations apply to laser products manufactured from August 1, 1976. Compliance is
mandatory for products marketed in the United States.
CAUTION
Use of controls, adjustments, or performance of procedures other than those specified in this manual may
result in hazardous radiation exposure.
The label is attached to the laser scanner machine inside the machine and is not in a
user access area.
xxviii
1
Before Using the
Machine
Before Using the Machine
Machine Components
A
A
B
C
ADF (Automatic Document Feeder)
Holds documents and feeds them
automatically into the scanning area.
D
B
Slide guides
Adjust to the width of the document.
C
Document feeder tray
Holds documents.
D
Document delivery tray
Receives documents.
E
Operation panel
Controls the machine.
F
Output tray
Receives copies, prints and faxes.
G
G
1-1
F
E
Paper feeding tray
Loads the paper supply.
H
Scans documents from the ADF.
J
I
Platen glass
Place documents.
J
Output tray extension
Extension for the output tray.
K
Prevents the paper from falling off the output
tray.
Open the paper stopper from its original
position for LTR/A4 paper. For LGL paper,
pull out the output tray extension first, and
then open the paper stopper.
K
L
L
Paper stopper
Slide guides for multi-purpose tray
Adjusts to the width of the paper.
M
Paper guide rail
Holds the paper supply.
N
Dust cover
Protects the paper supply in the paper
feeding tray from the dirt and dust.
Q
P
O N
M
O
Multi-purpose tray
Feeds paper when you insert one by one
manually.
P
Scanning platform
Open this platform when replacing the toner
cartridge or clearing paper jams.
Q
Main power switch
Turn the power on or off.
1-2
Before Using the Machine
I
H
Scanning area
R
R
USB port
Connect the USB (Universal Serial Bus)
cable.
S
Rear cover
Open this cover when clearing paper jams.
T
Power socket
Connect the power cord.
U
Telephone line jack
Before Using the Machine
Connect the external telephone cable.
V
S
V U
1-3
T
External device jack
Connect an external device.
Operation Panel
Main Operation Panel
C
D
X W
V
U
E
F G H
I
J
K
L
Before Using the Machine
A B
A
T
S
[System Monitor] key
Press to check print status, fax status, print
and scan counts, remaining memory, or print
transmission/reception results.
B
[View Settings] key
Press to confirm settings of the copy function.
C
[COPY] key
Press to switch to the Copy mode.
D
[FAX] key
Press to switch to the Fax mode.
E
G
[Additional Functions] key
Press to select or cancel the modes in
Additional Functions.
Q
P O
N
M
[2-Sided] key
Press to set two-sided copying.
H
[Enlarge/Reduce] key
Press to enlarge or reduce copy ratio.
I
[Density] key
Press to adjust copy or fax density.
J
[Image Quality] key
Press to select image quality for copy or fax.
K
[Collate/2 on 1] key
Press to collate copies, or press to set 2 on 1
copying.
[SCAN] key
Press to switch to the Scan mode.
F
R
L
[Energy Saver] key
Press to set or cancel the Sleep mode
manually. The key lights green when the
Sleep mode is set, and goes off when the
mode is canceled.
1-4
M
[Stop/Reset] key
S
Press to stop a current job. Also, press to
return the machine to the standby mode.
N
Error indicator
Press to clear entered alphanumeric
characters.
T
Flashes when an error has occurred.
Before Using the Machine
O
P
Processing/Data indicator
Flashes during sending or receiving faxes.
Lights when the machine has waiting jobs
and stores the data in memory.
U
[Start] key
V
R
] key
[OK] key
Press to accept a set function or mode.
[
] key
Press to decrease the value for various
settings. Also press to see the previous item
in the menu.
Numeric keys
Enter letters and numbers.
[
Press to increase the value for various
settings. Also press to see the next item in
the menu.
Press to start copying, scanning and sending
faxes.
Q
[Clear] key
W
LCD display
Displays messages and prompts during
operation. Displays selection, text, and
numbers when adjusting the settings.
[Tone] key
Press to switch from rotary pulse to tone
dialing.
X
[Toner Gauge] key
Press to check the toner remaining in the
toner cartridge.
1-5
Facsimile Operation Panel
A
B
C
D
Before Using the Machine
E
A
[Hook] key
D
Press when you want to dial without lifting up
the handset of the external telephone.
B
C
Press to search pre-registered destinations
under one-touch speed dialing keys or coded
dialing numbers by name.
[Redial/Pause] key
Press to redial the last dialed number when
fax is standing by, or press to insert a pause
when entering a fax number.
[Coded Dial] key
[Address Book] key
E
One-Touch Speed Dial keys
Press to use one-touch speed dialing (Preregistered frequently used numbers or group
dialing).
Press to perform coded dialing.
1-6
LCD (Standby Mode)
Fax Mode
Copy Mode
A
Before Using the Machine
A
12/31/2006
FaxOnly
SUN 10:50
STANDARD
B
100%
B
LTR
TEXT/PHOTO
D
C
E
A
Date & Time
A
Zoom ratio
B
Receive mode
B
Paper size
C
Image quality
C
Quantity
D
Density
E
Image quality
Scan Mode
SCANNING
MODE
NOTE
– Depending on your needs, you can change the
standby display which appears when the main
power switch is turned on. For details, see
“Setting Menu,” on p. 12-5.
– When the main power switch is turned on, the
LCD displays <PLEASE WAIT> first, and then
displays <INITIALIZING...> until the standby
display appears. It is also possible to see the
standby display without having
<INITIALIZING...> shown.
– If the machine remains idle for one minute, the
display returns to the standby mode (Auto Clear
Function).
1-7
C
1
Toner Cartridge
* “ISO/IEC 19752” is the global standard related to “Method for the determination of toner cartridge yield for
monochromatic electrophotographic printers and multi-function devices that may contain printer
components” issued by ISO (International Organization for Standardization).
Toner Cartridge name:
Canon Cartridge 104
Model
Name
Type
Supported Canon
Genuine Cartridge
Print Yield
Bundled
Canon Cartridge 104 Starter
Approx. 1,000 pages
Canon Cartridge 104
Approx. 2,000 pages
MF4150
Replacement
1-8
Before Using the Machine
The lifetime of the Canon genuine starter toner cartridge which comes with the
machine is approximately 1,000 pages, the Canon genuine replacement toner
cartridge is approximately 2,000 pages. The page counts are on the basis of “ISO/
IEC 19752”* when printing A4 size paper with the default print density setting. The
level of toner consumption varies depending on the type of documents printed. If
your average document contains a lot of graphics, tables, or charts, the life of the
toner cartridge will be shorter as they consume more toner. To purchase the Canon
genuine replacement toner cartridge, contact your local Canon dealer or Canon
Customer Care Center(U.S.A.:1-800-828-4040, Canada:1-800-652-2666).
Before Using the Machine
Maintaining the Toner Cartridge
● Keep the toner cartridge away from computer screens, disk drives, and floppy disks.
The magnet inside the toner cartridge may harm these items.
● Avoid locations subject to high temperature, high humidity, or rapid changes in
temperature.
● Do not expose the toner cartridge to direct sunlight or bright light for more than five
minutes.
● Store the toner cartridge in its protective bag. Do not open the bag until you are
ready to install the toner cartridge in the machine.
● Save the toner cartridge’s protective bag in case you need to repack and transport
the toner cartridge at a later date.
● Do not store the toner cartridge in a salty atmosphere or where there are corrosive
gases such as from aerosol sprays.
● Do not remove the toner cartridge from the machine unnecessarily.
● Do not open the drum protective shutter on the toner cartridge. Print quality may
deteriorate if the drum surface is exposed to light or is damaged.
● Always hold the toner cartridge by its handle to avoid touching the drum protective
shutter.
● Do not stand the toner cartridge on end, and do not turn it upside down. If toner
becomes caked in the toner cartridge, it may become impossible to free it even by
shaking the toner cartridge.
CAUTION
Do not place the toner cartridge in fire. Toner powder is flammable.
1-9
Checking the toner level
You can check the amount of toner remaining in the toner cartridge by pressing the
[Toner Gauge] key. The toner level is displayed in the LCD at four levels.
If the toner gauge indicates that the toner is empty, it is recommended that the toner
cartridge be replaced. (See “Replacing the Toner Cartridge,” on p. 10-8.)
Toner full
GAUGE
Before Using the Machine
TONER
0%
100%
Toner high
TONER
0%
GAUGE
100%
Toner low
TONER
0%
GAUGE
100%
Toner empty
TONER
0%
GAUGE
100%
NOTE
To return to the standby mode, press [Stop/Reset]
1-10
Timer Settings
Setting the Sleep Mode
Before Using the Machine
When the machine remains idle for a certain period of time, it automatically enters the
Sleep mode.
1
2
3
[OK]
1
2
3
1-11
Press [Additional Functions].
Press [
] or [
] to select <TIMER SETTINGS>, then press [OK].
Press [
] or [
] to select <AUTO SLEEP>, then press [OK].
6
4
Before Using the Machine
5
[OK]
4
5
Press [
] or [
] to select <ON>, then press [OK].
Press [
] or [
] to select the desired interval, then press [OK].
You can set the interval from 3 to 30 minutes (in one-minute increments).
You can also enter values with the numeric keys.
6
Press [Stop/Reset] to return to the standby mode.
1-12
NOTE
Before Using the Machine
– To resume the normal mode from the Sleep mode, press [Energy Saver] on the operation panel.
– To enter the Sleep mode manually, press [Energy Saver] on the operation panel.
– The machine will not enter the Sleep mode when:
• the machine is in operation
• the Processing/Data indicator lights or flashes
• an error code or message appears on the display and the Error indicator flashes
• no paper is loaded in the paper feeding tray
• paper is loaded in the multi-purpose tray
• a paper jam occurs in the machine
– The machine will leave the Sleep mode when:
• you press [Energy Saver] on the operation panel
• a fax is received
• the handset of the external telephone is off the hook
• a print job is sent from a computer, and the print is started
1-13
Setting Daylight Saving Time
In some countries or areas, time is advanced throughout the summer season. This is
called “Daylight Saving Time.”
5
2
3
4
[OK]
1
2
3
4
Press [Additional Functions].
Press [
] or [
] to select <TIMER SETTINGS>, then press [OK].
Press [
] or [
] to select <DAYLIGHT SV.TIME>, then press [OK].
Press [
] or [
] to select <ON> or <OFF>, then press [OK].
<ON>: adapts to Daylight Saving Time.
<OFF>: does not adapt to Daylight Saving Time.
5
Press [Stop/Reset] to return to the standby mode.
1-14
Before Using the Machine
1
2
Document Handling
Document Handling
Document Requirements
Platen Glass
ADF
Plain paper (Multipage documents of
Plain paper
Thick documents
the same size, thickness and weight or
Photographs
one page documents.)
Small documents (e.g., index cards)
Special types of paper (e.g., tracing
paper*1, transparencies*1, etc.)
– Book (Height: max. 1" (24 mm))
Type
–
–
–
–
–
Size (W x L)
Max. 8 1/2" x 11 5/8"
(Max. 216 x 296 mm)
Max. 8 1/2" x 14"
(Max. 216 x 356 mm)
Min. 4 1/8" x 5 7/8"
(Min. 105 x 148.5 mm)
Weight
Max. 4.4 lb (2 kg)
11 to 28 lb bond
(40 to 105 g/m2)
Quantity
1 sheet
Max. 35 sheets*2
(Max. 10 sheets for LGL documents)
*1 When copying a transparent document such as tracing paper or transparencies, use a piece of plain
white paper to cover the document after placing it face-down on the platen glass.
*2 21 lb bond (80 g/m2) paper
2-1
2-2
Document Handling
● Do not place the document on the platen glass or in the ADF until the glue, ink or
correction fluid on the document is completely dry.
● Remove all fasteners (staples, paper clips, etc.) before loading the document in the
ADF.
● To prevent document jams in the ADF, do not use any of the following:
– Wrinkled or creased paper
– Carbon paper or carbon-backed paper
– Curled or rolled paper
– Coated paper
– Torn paper
– Onion skin or thin paper
– Documents with staples or paper clips attached
– Paper printed with a thermal transfer printer
– Transparencies
Scanning Area
Make sure your document’s text and graphics fall within the shaded area in the
following diagram. Note that the margin widths listed are approximate and there
may be slight variations in actual use.
(2 mm)
1/8"
(2 mm)
Document Handling
1/8"
2-3
1/8"
1/8"
(2 mm)
(2 mm)
Loading Documents
On the Platen Glass
Lift up the ADF.
2
Place your document face down.
Document Handling
1
2-4
3
Align the document with the appropriate paper size marks.
A4
A5
A5
Document Handling
A4
If your document does not match any of the paper size marks, align the center of your document
with the arrow mark.
4
Gently close the ADF.
The document is ready for scanning.
CAUTION
– When closing the ADF be careful not to get your fingers caught, as this may result in
personal injury.
– Do not press down the ADF forcefully, as this may damage the platen glass and cause
personal injury.
NOTE
Remove the document from the platen glass when scanning is complete.
2-5
In the ADF
Fan the document stack and even the edges.
2
Adjust the slide guides to the width of the documents.
Document Handling
1
2-6
3
Neatly place the documents face up in the document feeder tray.
Document Handling
When enlarging STMT originals to LTR paper, place your originals horizontally.
The document is ready for scanning.
NOTE
– Do not add or remove documents while they are being scanned.
– When scanning is complete, remove the documents from the document delivery tray to avoid
paper jams.
– Avoid using ADF to scan the same document more than 30 times. When scanned repeatedly,
documents can become folded or torn, which may cause paper jams.
– If the feeder rollers are soiled from scanning a document written in pencil, clean them. (See
“Cleaning the Machine,” on p. 10-1.)
2-7
3
Print Media
Paper Requirements
Print Media
Paper feeding tray
Size (W x L)
Weight
Multi-purpose tray
LTR, LGL, A4, B5, A5, Executive, Envelope (COM10, Monarch,
DL, ISO-C5), Oficio, Brazil-Oficio, Mexico-Oficio, Folio,
Government-LTR, Government-LGL, Foolscap
(3" x 5" to 8 1/2" x 14" (76 x 127 to 216 x 356 mm))
16 to 43 lb bond (60 to 163 g/m2)
Quantity
Max. 250 sheets
(Height: max. 1" (25 mm))
Max. 1 sheet
Type
Plain Paper, Plain Paper L, Heavy Paper, Heavy Paper H,
Transparency
NOTE
The default paper size is LTR. If you use a different paper size, you must change the paper size settings.
(See “Setting Paper Size and Type,” on p. 3-7.)
3-1
Printable Area
1/4"
(5 mm)
1/4"
1/4"
(6 mm)
1/4"
(6 mm)
(5 mm)
3-2
Print Media
The shaded area indicates the approximate printable area of LTR paper and
envelope. Note that the margin widths listed are approximate and there may be
slight variations in actual use.
Print Media
Paper Guidelines
● To prevent paper jams, do not use any of the following:
– Wrinkled or creased paper
– Curled or rolled paper
– Coated paper
– Torn paper
– Damp paper
– Very thin paper
– Paper which has been printed on using a thermal transfer printer (Do not copy on
the reverse side.)
● The following types of paper do not print well:
– Highly textured paper
– Very smooth paper
– Shiny paper
● Make sure the paper is free from dust, lint, and oil stains.
● Be sure to test paper before purchasing large quantities.
● Store all paper wrapped and on a flat surface until ready for use. Keep opened packs
in their original packaging in a cool, dry location.
● Store paper at 64.4°F–75.2°F (18°C–24°C), 40%–60% relative humidity.
● Use only the transparencies designed for laser printers. Canon recommends you to
use Canon type transparencies with this machine.
3-3
Loading Paper
To load paper in the paper feeding tray, see “Set Up the Paper Trays and Load
Paper,” in the Starter Guide.
Into the Multi-Purpose Tray
Use the multi-purpose tray when you want to copy or print on the different paper which
is in the paper feeding tray. Load paper one by one in the multi-purpose tray.
1
Spread the paper guides a little wider than the actual paper width.
3-4
Print Media
NOTE
– The paper in the multi-purpose tray is fed prior to the paper in the paper feeding tray.
– The recommended envelopes are COM10, MONARCH, DL, and ISO-C5. Using other envelopes may
affect the quality of the printout.
– Make sure to set the correct paper size in the printer driver. (See Online Help.)
– When printing received documents, it is possible to feed paper only from the paper feeding tray. If paper
is loaded into the multi-purpose tray, <REMOVE MP PAPER> appears.
2
When setting a paper, gently insert the paper into the multi-purpose tray
with the print side up.
Print Media
NOTE
When you load paper with a logo on, position the paper with the print side up (logo side) and insert
it so that the top of the paper feeds first in the multi-purpose tray.
When setting an envelope, gently insert the envelope into the multipurpose tray with the print side up and the right edge (i.e., closer to the
stamp) first.
3-5
3
Slide the paper guides so that they fit to both sides of the paper.
NOTE
4
Specify the size and the type of the paper you load.
For details on how to specify the paper size and type, see “Setting Paper Size and Type,” on p. 3-7.
3-6
Print Media
If the paper guides are not adjusted correctly for the size of the paper, the quality of your printouts
may be adversely affected.
Setting Paper Size and Type
The default setting is <LTR> and <PLAIN PAPER>. When you place other sizes
and/or types of paper, follow this procedure to change the settings.
The procedure is same for the paper feeding tray and multi-purpose tray except
for selecting the paper feeding tray or multi-purpose tray in step 3 and 6.
Print Media
1
2
3
[OK]
1
2
3
3-7
Press [Additional Functions].
Press [
] or [
] to select <PAPER SETTINGS>, then press [OK].
Press [
[OK].
] or [
] to select <CASSETTE> or <MP TRAY>, then press
4
5
6
Print Media
[OK]
4
5
Press [
] or [
] to select <PAPER SIZE>, then press [OK].
Press [
] or [
] to select the paper size, then press [OK].
<LTR>, <LGL>, <A4>, <B5>, <A5>, <EXECUTIVE>, <COM10>, <MONARCH>, <DL>, <ISO-C5>,
<OFICIO>, <BRAZIL-OFICIO>, <MEXICO-OFICIO>, <FOLIO>, <GOVERNMENT-LETTER>,
<GOVERNMENT-LEGAL>, <FOOLSCAP>
NOTE
The paper sizes available will vary depending on the country where the unit was purchased.
6
Press [
[OK].
] or [
] to select <CASSETTE> or <MP TRAY>, then press
3-8
9
Print Media
7
8
[OK]
7
8
Press [
] or [
] to select <PAPER TYPE>, then press [OK].
Press [
] or [
] to select the paper type, then press [OK].
You can select from the following paper types:
<PLAIN PAPER> or <PLAIN PAPER L>*1 for Plain paper (17 lb to 24 lb (64 g/m2 to 90 g/m2))
<HEAVY PAPER> or <HEAVY PAPER H>*2 for Heavy paper (Paper feeding tray: 28 lb to 34 lb
(105 g/m2 to 128 g/m2), Multi-purpose tray: 28 lb to 43 lb (105 g/m2 to 163 g/m2)) or Envelope
<TRANSPARENCY> for Transparency
*1
If paper curls excessively when printed with <PLAIN PAPER> selected, select <PLAIN
PAPER L>.
*2
If print fixing is not sufficient when printed with <HEAVY PAPER> selected, select <HEAVY
PAPER H>.
9
3-9
Press [Stop/Reset] to return to the standby mode.
4
Sending Faxes
Follow this procedure to send a fax.
For advanced sending features, see Chapter 1, “Advanced Fax Features,” in the
Advanced Guide.
Sending Faxes
1
Set a Document
2
Enter the Fax Mode
CBA
Place the document on the platen
glass or load it in the ADF.
For documents you can fax, see “Document
Requirements,” on p. 2-1.
Press [FAX].
The FAX indicator lights and the machine enters the fax
standby mode.
What if...
● You want to adjust the resolution and
density:
See “Scan Settings,” on p. 4-3.
4-1
3
Enter the Fax Number
4
Send the Document
Sending Faxes
Dial the recipient’s fax number with
the numeric keys.
Ex.
=012XXXXXXX
What if...
● You enter a wrong number:
Go back to the wrong digit with [
],
then press [Clear] to delete it. Or press
and hold [Clear] to delete the entire
entry. Then try again.
Press [Start].
When you set the document on the platen glass, press
[Start] for each document. When scanning is complete,
press [OK].
If <CONFIRM NEW DEST.> is set to <ON> in the <TX
SETTINGS> of the <FAX SETTINGS> menu, you need
to enter the fax number again after pressing [Start].
What if...
● You press [Stop/Reset] to cancel a
job during scanning documents or
after scanning documents:
The <CANCEL DURING TX/RX?>
message appears. Press [
] to select
<Yes>.
4-2
Scan Settings
You can adjust the image quality and density of the document you send. The
higher image quality you set, the better the output will be, but the longer the
transmission will take. Adjust the scan settings according to the type of
document you are sending.
Sending Faxes
Image Quality
1
1
2
4-3
Press [FAX].
Press [Image Quality].
2
3
[OK]
Press [
] or [
Sending Faxes
3
] to select the resolution, then press [OK].
<STANDARD> for most text-only documents. (200 x 100 dpi)
<FINE> for fine-print documents (the resolution is twice that of <STANDARD>). (200 x 200 dpi)
<PHOTO> for documents that contain photographs (the resolution is twice that of <STANDARD>).
(200 x 200 dpi)
<SUPER FINE> for documents that contain fine print and images (the resolution is four times that
of <STANDARD>). (200 x 400 dpi)
4-4
Density
2
1
Sending Faxes
3
[OK]
1
2
Press [FAX].
Press [Density].
Ex.
DENSITY
-LT
3
Press [
[
[
4-5
] or [
DK+
] to adjust the density, then press [OK].
]: to make light documents darker
]: to make dark documents lighter
Speed Dialing
Speed dialing allows you to dial fax/telephone numbers by simply pressing one
or a few keys. The following speed dialing methods are available:
Registering Recipients for Speed Dialing
For each recipient, you can register:
– Name
– Fax number (required)
4-6
Sending Faxes
● One-Touch Speed Dialing (p. 4-7)
– Register a fax/telephone number for one-touch speed dialing, then to dial the
number, simply press the one-touch speed dialing key assigned to that number.
You can register up to 8 one-touch speed dialing keys, including group dialing.
● Coded Dialing (p. 4-14)
– Register a fax/telephone number for coded dialing, then to dial the number, simply
press [Coded Dial] and enter the two-digit code assigned to that number.
You can register up to 100 coded dialing codes.
● Group Dialing (p. 4-21)
– Register a group of fax numbers (must be registered for one-touch speed dialing
and/or coded dialing) for group dialing, then to send a document to all numbers in
that group, simply press the one-touch speed dialing key assigned to that group.
You can register up to 50 destinations into a one-touch speed dialing key as a
group.
● Registering One-Touch Speed Dialing
2
3
4
1
Sending Faxes
[OK]
1
2
3
4
Press [Additional Functions].
Press [
] or [
] to select <ADDRESS BOOK SET.>, then press [OK].
Press [
] or [
] to select <1-TOUCH SPD DIAL>, then press [OK].
Press a one-touch speed dialing key (01 to 08) for which you want to
register the fax number, then press [OK].
You can also select a one-touch speed dialing number with [
4-7
] or [
].
5
6
7
[OK]
Enter the destination name (max. 20 characters, including spaces) with the
numeric keys, then press [OK].
Ex.
NAME
CAN
6
[A]
Enter the fax number you register (max. 50 digits, including spaces and
pauses) with the numeric keys, then press [OK].
Ex.
TEL NUMBER ENTRY
012XXXXXXX_
To register another one-touch speed dialing key, repeat the procedure from step 4.
7
Press [Stop/Reset] to return to the standby mode.
4-8
Sending Faxes
5
● Editing One-Touch Speed Dialing
2
3
4
1
Sending Faxes
[OK]
1
2
3
4
4-9
Press [Additional Functions].
Press [
] or [
] to select <ADDRESS BOOK SET.>, then press [OK].
Press [
] or [
] to select <1-TOUCH SPD DIAL>, then press [OK].
Press the one-touch speed dialing key (01 to 08) you want to edit, then
press [OK].
5
6
[OK]
Press [
] or [
] repeatedly to go to the wrong character, then press
[Clear] to delete it.
To delete the entire name, press and hold [Clear].
6
Enter a new character with the numeric keys, then press [OK].
4-10
Sending Faxes
5
8
9
7
Sending Faxes
[OK]
7
Press [
] or [
] repeatedly to go to the wrong number, then press
[Clear] to delete it.
To delete all numbers, press and hold [Clear].
8
9
4-11
Enter a new number with the numeric keys, then press [OK].
Press [Stop/Reset] to return to the standby mode.
● Deleting One-Touch Speed Dialing
2
3
4
1
[OK]
Sending Faxes
1
2
3
4
Press [Additional Functions].
Press [
] or [
] to select <ADDRESS BOOK SET.>, then press [OK].
Press [
] or [
] to select <1-TOUCH SPD DIAL>, then press [OK].
Press the one-touch speed dialing key (01 to 08) you want to delete, then
press [OK].
4-12
7
6
Sending Faxes
[OK]
5
6
Press [OK].
Press and hold [Clear] to delete all numbers, then press [OK].
NOTE
When deleting all numbers, the registered name is cleared automatically.
7
4-13
Press [Stop/Reset] to return to the standby mode.
● Registering Coded Dialing
1
2
3
4
1
2
3
4
Sending Faxes
[OK]
Press [Additional Functions].
Press [
] or [
] to select <ADDRESS BOOK SET.>, then press [OK].
Press [
] or [
] to select <CODED DIAL>, then press [OK].
Press [
[OK].
] or [
] to select a coded dialing code (00 to 99), then press
You can also enter a coded dialing code with the numeric keys after pressing [Coded Dial].
4-14
5
6
7
Sending Faxes
[OK]
5
Enter the destination name (max. 20 characters, including spaces) with the
numeric keys, then press [OK].
Ex.
NAME
CAN
6
[A]
Enter the fax number you register (max. 50 digits, including spaces and
pauses) with the numeric keys, then press [OK].
Ex.
TEL NUMBER ENTRY
012XXXXXXX_
If you register another coded dialing number, repeat the procedure from step 4.
7
4-15
Press [Stop/Reset] to return to the standby mode.
● Editing Coded Dialing
1
2
3
4
1
2
3
4
Sending Faxes
[OK]
Press [Additional Functions].
Press [
] or [
] to select <ADDRESS BOOK SET.>, then press [OK].
Press [
] or [
] to select <CODED DIAL>, then press [OK].
Press [
] or [
] to select the coded dialing code (00 to 99) that you
want to edit, then press [OK].
You can also enter a coded dialing code with the numeric keys after pressing [Coded Dial].
4-16
5
6
Sending Faxes
[OK]
5
Press [
] or [
] repeatedly to go to the wrong character, then press
[Clear] to delete it.
To delete the entire name, press and hold [Clear].
6
4-17
Enter a new character with the numeric keys, then press [OK].
8
9
7
[OK]
Press [
] or [
] repeatedly to go to the wrong number, then press
[Clear] to delete it.
To delete all numbers, press and hold [Clear].
8
9
Enter a new number with the numeric keys, then press [OK].
Press [Stop/Reset] to return to the standby mode.
4-18
Sending Faxes
7
● Deleting Coded Dialing
1
Sending Faxes
2
3
4
[OK]
1
2
3
4
Press [Additional Functions].
Press [
] or [
] to select <ADDRESS BOOK SET.>, then press [OK].
Press [
] or [
] to select <CODED DIAL>, then press [OK].
Press [
] or [
] to select the coded dialing code (00 to 99) that you
want to delete, then press [OK].
You can also enter a coded dialing code with the numeric keys after pressing [Coded Dial].
4-19
7
6
[OK]
Sending Faxes
5
6
Press [OK].
Press and hold [Clear] to delete all numbers, then press [OK].
NOTE
When deleting all numbers, the registered name is cleared automatically.
7
Press [Stop/Reset] to return to the standby mode.
4-20
● Registering Group Dialing
2
3
4
1
Sending Faxes
[OK]
1
2
3
4
Press [Additional Functions].
Press [
] or [
] to select <ADDRESS BOOK SET.>, then press [OK].
Press [
] or [
] to select <GROUP DIAL>, then press [OK].
Specify an empty one-touch speed dialing key that you want to set as the
group dial, then press [OK].
For details on selecting a one-touch speed dialing key, see “Registering One-Touch Speed
Dialing,” on p. 4-7.
4-21
5
7
6
[OK]
Sending Faxes
5
Enter the group name (max. 20 characters, including spaces) with the
numeric keys, then press [OK].
Ex.
NAME
CANON
6
GROUP
[A]
Select the speed dialing numbers you want to register in the group (max.
50 destinations) until all destinations are registered, then press [OK].
The speed dialing number refers to the one-touch dialing number or coded dialing code under
which the fax/telephone number is registered.
To enter a number stored under a one-touch speed dialing key, press the desired one-touch speed
dialing key(s).
To enter a number stored under a coded dialing code, press [Coded Dial], then enter the two-digit
code for the number with the numeric keys. For multiple entries, press [Coded Dial] between each
entry.
NOTE
You can review the destinations which have been already entered with [
7
] or [
].
Press [Stop/Reset] to return to the standby mode.
4-22
● Adding New Destination to Group
1
2
3
4
7
Sending Faxes
6
[OK]
1
2
3
4
Press [Additional Functions].
Press [
] or [
] to select <ADDRESS BOOK SET.>, then press [OK].
Press [
] or [
] to select <GROUP DIAL>, then press [OK].
Press [
] or [
] to select a group dial to edit, then press [OK].
The group name appears.
5
6
Press [OK].
Select the speed dialing number you want to add to the group, then press
[OK].
For details on entering the speed dialing number, see “Registering Group Dialing,” on p. 4-21.
7
4-23
Press [Stop/Reset] to return to the standby mode.
● Deleting Destination from Group
1
2
3
4
1
2
3
4
Sending Faxes
[OK]
Press [Additional Functions].
Press [
] or [
] to select <ADDRESS BOOK SET.>, then press [OK].
Press [
] or [
] to select <GROUP DIAL>, then press [OK].
Press [
] or [
] to select a group dial to delete, then press [OK].
The group name appears.
5
Press [OK].
4-24
7
9
6
Sending Faxes
[OK]
6
7
8
9
4-25
Press [
] or [
from the group.
] to display the speed dial number you want to delete
Press [Clear].
Repeat steps 6 and 7 if you want to delete another speed dialing number,
then press [OK].
Press [Stop/Reset] to return to the standby mode.
● Changing Group Name
1
2
3
4
1
2
3
4
Sending Faxes
[OK]
Press [Additional Functions].
Press [
] or [
] to select <ADDRESS BOOK SET.>, then press [OK].
Press [
] or [
] to select <GROUP DIAL>, then press [OK].
Press [
] or [
] to select a group dial to edit, then press [OK].
4-26
6
8
5
Sending Faxes
[OK]
5
Press [
] or [
] repeatedly to go to the wrong character, then press
[Clear] to delete it.
To delete the entire character, press and hold [Clear].
6
7
8
4-27
Enter a new name with the numeric keys, then press [OK].
Press [OK].
Press [Stop/Reset] to return to the standby mode.
● Deleting Group Dialing
1
2
3
4
1
2
3
4
Sending Faxes
[OK]
Press [Additional Functions].
Press [
] or [
] to select <ADDRESS BOOK SET.>, then press [OK].
Press [
] or [
] to select <GROUP DIAL>, then press [OK].
Press [
] or [
] to select a group dial to delete, then press [OK].
The group name appears.
5
Press [OK].
4-28
9
6
[OK]
Sending Faxes
7
6
7
8
Press [
] or [
] to display a speed dial number.
Press [Clear].
Repeat steps 6 and 7 until all speed dial numbers are deleted, then press
[OK].
NOTE
When deleting all speed dial numbers, the group name is cleared automatically.
9
4-29
Press [Stop/Reset] to return to the standby mode.
Using Speed Dialing
Follow the procedure below to send faxes to registered recipients using speed dialing.
For easy reference, print out the list of recipients registered for speed dialing. (See
Chapter 4, “Reports and Lists,” in the Advanced Guide.)
● Using One-Touch Speed/Group Dialing
2
5
[OK]
1
2
3
Place the document on the platen glass or load it in the ADF.
Press [FAX].
Adjust any necessary settings for your document.
For details, see “Scan Settings,” on p. 4-3.
4
5
Press the desired one-touch speed or group dialing key (01 to 08).
Press [Start].
When you set the document on the platen glass, press [Start] for each document. When scanning
is complete, press [OK].
4-30
Sending Faxes
4
● Using Coded Dialing
2
4
5
Sending Faxes
6
[OK]
1
2
3
Place the document on the platen glass or load it in the ADF.
Press [FAX].
Adjust any necessary settings for your document.
For details, see “Scan Settings,” on p. 4-3.
4
5
Press [Coded Dial].
Enter the desired two-digit code (00 to 99) with the numeric keys.
Ex.
[
6
=012XXXXXXX
01]CANON
Press [Start].
When you set the document on the platen glass, press [Start] for each document. When scanning
is complete, press [OK].
4-31
Manual Sending
Use manual sending when you want to talk to the recipient before sending a
document, or if the recipient does not have a fax machine that can receive
automatically.
NOTE
– You cannot use the platen glass for manual sending.
– You cannot use group dialing for manual sending.
Sending Faxes
3
1
Connect an external telephone to the machine if you want to talk to the
recipient before sending a document.
For details on how to connect an external telephone to the machine, see “Connect Telephone
Cables,” in the Starter Guide.
2
3
4
Load the document in the ADF.
Press [FAX].
Adjust any necessary settings for your document.
For details, see “Scan Settings,” on p. 4-3.
4-32
6
5
Sending Faxes
9
5
6
Press [Hook] or pick up the handset of your external telephone.
Dial the recipient’s fax/telephone number.
NOTE
Make sure to confirm the dial tone before entering a fax number. If you enter the number before
the dial tone can be heard, the call may not connect, or the wrong number may be dialed.
7
Talk through the handset to the recipient.
If you press [Hook] in step 5, you can pick up the handset when you hear the recipient’s voice.
If you hear a high-pitched signal instead of the recipient's voice, go to step 9.
8
9
4-33
Ask the recipient to set their fax machine to receive faxes.
When you hear a high-pitched signal, press [Start], then hang up the
handset.
5
Receiving Faxes
Follow this procedure to set the machine for receiving faxes.
For advanced receiving features, see Chapter 1, “Advanced Fax Features,” in the
Advanced Guide.
Enter the Setting Menu
2
Enter the Receive Mode
Receiving Faxes
1
Press [Additional Functions].
Select <FAX SETTINGS> with [
or [
], then press [OK].
Select <RX SETTINGS> with [
], then press [OK].
]
or [
Select <RX MODE> with [
], then press [OK].
[
5-1
]
] or
3
Select the Receive Mode
4
Exit the Setting Menu
Receiving Faxes
Select the receive mode with [
or [
], then press [OK].
]
<FaxOnly>: Answers all calls as faxes.
<AnsMode>: Receives faxes automatically and records
voice messages.
<DRPD>: Distinguishes between fax and voice calls if
you want to use an external telephone.
<FAX/TEL>: Switches between fax and voice calls
automatically if an external telephone is connected to
the machine.
<MANUAL>: Does not answer any calls. You have to
manually receive faxes.
For details on these settings, see Chapter 1, “Advanced
Fax Features,” in the Advanced Guide.
NOTE
– For <AnsMode>, make sure an answering
machine is connected to the machine.
– For <DRPD>, subscription to a DRPD
service is required.
Press [Stop/Reset] to return to the
standby display.
What if...
● You press [Stop/Reset] to cancel a
job:
The <CANCEL DURING TX/RX?>
message appears. Press [
] to select
<Yes>. The job is canceled, and the
display returns to the standby mode.
● The <OUT OF TONER/CHANGE
TONER> message appears:
The toner cartridge is almost empty.
Replace the toner cartridge.
For details on this error message, see
“LCD Messages,” on p. 11-9.
5-2
6
Copying
Follow this procedure to make a copy.
For advanced copying features, see Chapter 2, “Advanced Copy Features,” in the
Advanced Guide.
1
Set a Document
2
Enter the Copy Mode
Copying
CBA
Place the document on the platen
glass or load it in the ADF.
For documents you can copy, see “Document
Requirements,” on p. 2-1.
Press [COPY].
The COPY indicator lights and the machine enters the
copy standby mode.
What if...
● You want to adjust the resolution and
density:
See “Scan Settings,” on p. 6-3.
6-1
3
Enter the Copy Quantity
4
Start Copying
Copying
Enter the copy quantity (1 to 99)
with the numeric key.
Press [Start].
Ex.
100%
LTR
TEXT/PHOTO
3
What if...
● You enter a wrong number:
Press [Clear] and enter a new number.
What if...
● You press [Stop/Reset] to cancel a
job while scanning documents:
The job is canceled immediately, and the
copy quantity is reset.
● You press [Stop/Reset] to cancel a
job while printing:
The <CANCEL COPYING?> message
appears. Press [
] to select <YES>.
6-2
Scan Settings
Before pressing [Start] to begin copying, you can adjust scan settings to better
suit the document to be scanned. These settings return to the default values if
Auto Clear function is activated or if you press [Stop/Reset].
Image Quality
2
Copying
1
1
2
Press [COPY].
Press [Image Quality] repeatedly to select the document type.
<TEXT/PHOTO>: For documents that contain text and photos.
<TEXT>: For text documents.
<PHOTO>: For documents that contain fine text or photos.
<TEXT/PHOTO+>: For documents that contain fine text and photos.
NOTE
Copy density automatically changes to the manual mode when <TEXT/PHOTO>, <PHOTO>, or
<TEXT/PHOTO+> is set.
6-3
Density
You can adjust the density to the most appropriate level for the document either
automatically or manually.
● Adjusting Automatically
2
1
Copying
[OK]
1
2
Press [COPY].
Press [Density] repeatedly until <AUTO> appears, then press [OK].
NOTE
The image quality is automatically set to <TEXT>.
6-4
● Adjusting Manually
2
1
3
Copying
[OK]
1
2
Press [COPY].
Press [Density] repeatedly to select the manual mode.
Ex.
DENSITY
-LT
3
Press [
[
[
6-5
] or [
DK+
] to adjust the copy density, then press [OK].
]: to make light documents darker
]: to make dark documents lighter
Zoom Ratio
● Preset Zoom
You can enlarge or reduce documents from one standard paper size to another.
2
1
3
1
2
3
Copying
[OK]
Press [COPY].
Press [Enlarge/Reduce].
Press [
–
–
–
–
–
–
] or [
] to select the copy ratio, then press [OK].
200 % MAX.
129 % STMT → LTR
100 %
78 %
64 %
50 % MIN.
NOTE
When <PAPER SIZE GROUP> in the <COPY SETTINGS> menu is set to <A> or <AB>, the
preset copy ratios change as follows:
A: 50%, 70%, 100%, 141%, 200%
AB: 50%, 70%, 81%, 86%, 100%, 115%, 122%, 141%, 200%
6-6
● Zoom Designation
You can reduce or enlarge images by any copy ratio, in 1 % increments. The available
copy ratios are from 50 % to 200 %.
2
1
3
Copying
[OK]
1
2
3
Press [COPY].
Press [Enlarge/Reduce] twice.
Enter the copy ratio with the numeric keys, then press [OK].
Ex.
ZOOM
-
50-200%
100%
+
You can also use [
] or [
] to adjust the zoom ratio. To increase the zoom ratio, press [
To decrease the copy ratio, press [
].
NOTE
To return the copy ratio to 100%, press [Stop/Reset].
6-7
].
7
Printing
Follow this procedure to print a document from your computer.
Make sure that the printer driver is installed.
For details on printer driver settings, see Online Help.
Start the Print Command
2
Select the Printer
Printing
1
From an open document on an
application, click [File] > [Print].
7-1
Select the printer icon for the
machine ([Canon MF4100 Series
UFRII LT]).
3
Adjust Preferences
4
Print the Document
Printing
Click [Preferences] or [Properties]
to open the dialog box. After
finished, click [OK].
Click [Print] or [OK].
What if...
● You want to cancel printing:
See Chapter 3, “System Monitor,” in the
Advanced Guide.
7-2
8
Scanning
Follow this procedure to scan a document to your computer.
Make sure that the scanner driver is installed.
For details on scanner driver settings, see the Scanner Driver Guide (in the User
Software CD).
1
Set a Document
2
Enter the Scan Mode
Scanning
ABC
Place the document on the platen
glass or load it in the ADF.
For documents you can scan, see “Document
Requirements,” on p. 2-1.
8-1
Press [SCAN].
The SCAN indicator lights up and the machine enters
the scan standby mode.
3
Set Scan Function
4
Start Scanning
Scanning
Start MF Toolbox, then set the
scanning format.
Press [Start].
The mark will be displayed above the button you select.
For details on the MF Toolbox Settings, see Chapter 2,
“Scanning a Document,” in the Scanner Driver Guide.
What if...
● You want to cancel scanning:
Press [Stop/Reset] on the operation
panel, then click [OK] on the computer
screen.
8-2
9
PC Faxing
Follow this procedure to send a fax from your computer.
Make sure that the fax driver is installed.
For details on fax driver settings, see Online Help.
Start the Print Command
2
Select the Fax
PC Faxing
1
From an open document on an
application, click [File] > [Print].
Select the fax icon ([Canon MF4100
Series(FAX)]), then click [Print] or
[OK].
What if...
● You want to adjust the fax properties:
Click [Preferences] or [Properties] and
adjust the settings.
9-1
3
Set the Destination
4
Send the Document
PC Faxing
Specify the name and fax number in
[Sending Settings], then click [Add
to Recipient List].
What if...
● You want to send a fax with the cover
sheet:
Click the [Cover Sheet] tab and set the
format for the cover sheet attachment.
Click [OK] in the Fax Sending
Settings.
What if...
● You want to cancel sending a fax:
See Chapter 3, “System Monitor,” in the
Advanced Guide.
9-2
10
Maintenance
Cleaning the Machine
Maintenance
Note the following before cleaning
your machine:
– Make sure no document is stored in
memory, then turn off the main
power switch and disconnect the
power cord.
– Use a soft cloth to avoid scratching
the components.
– Do not use tissue paper, paper
towels, or similar materials for
cleaning; they can stick to the
components or generate static
charges.
CAUTION
Never use volatile liquids such as thinners,
benzene, acetone, or any other chemical cleaner to
clean the machine. These can damage the
machine components.
10-1
Exterior
1
2
3
Turn off the main power switch
and disconnect the power cord.
Wipe the machine’s exterior with
a clean, soft, lint-free cloth
dampened with water or diluted
dishwashing detergent solution.
Wait for the machine to dry, then
reconnect the power cord and
turn on the main power switch.
3
Interior
Remove the toner cartridge.
Clean the machine’s print area
periodically to prevent toner powder and
paper dust from accumulating inside.
1
2
Turn off the main power switch
and disconnect the power cord.
Lift the scanning platform until it
is locked (A), and open the
printer cover (B).
CAUTION
– To avoid exposing the toner cartridge to
light, place it in its protective bag or
wrap it in a thick cloth.
– Do not open the drum protective shutter
on the toner cartridge. Print quality may
deteriorate if the drum surface is
exposed to light or is damaged.
A
Maintenance
NOTE
Always hold the toner cartridge by its
handle.
B
4
Use a clean, soft, dry, lint-free
cloth to remove any toner or
paper debris from the machine’s
interior.
10-2
6
CAUTION
– Do not touch the fixing assembly (A) as
it becomes very hot during use.
– Do not touch the transfer roller (B) as
this can damage the machine.
Insert the toner cartridge into
the machine as far as it will go.
Align the guide (A) on the left side of the
toner cartridge with the groove inside the
machine.
A
A
B
– If loose toner comes into contact with
your skin or clothing, wash with cold
water. Warm water will set the toner.
5
Hold the toner cartridge by its
handle (A).
The arrow (A) on the toner cartridge should
be facing away from you and pointing
down.
Maintenance
A
10-3
7
Push the toner cartridge to make
sure it is properly set in the
machine.
8
Close the printer cover and
lower the scanning platform.
Fuser Roller
If black streaks appear with printing, the
fuser roller in the main unit may be dirty.
Should this occur, clean the fusing roller
in the following procedure. The roller
should also be cleaned each time the
toner cartridge is replaced. Load a sheet
of blank LTR paper into the multi-purpose
tray and start cleaning.
NOTE
CAUTION
Cleaning the roller takes approximately 130
seconds.
Be careful not to get your fingers caught.
9
Reconnect the power cord and
turn on the main power switch.
1
2
3
Press [Additional Functions].
Press [
] or [
] to select
<ADJUST./CLEANING>, then
press [OK].
Load a sheet of blank LTR paper
in the multi-purpose tray.
Maintenance
10-4
4
Press [
] or [
] to select
<FIX. UNIT CLEANING>, then
press [OK].
Cleaning starts. When finished, the display
returns to the standby mode.
NOTE
– Use standard paper as the cleaning
paper.
– Throw away the cleaning paper after use.
Scanning area
Keep the scanning area clean to avoid
dirty copies or faxes to be sent.
● Platen glass
1
Clean the platen glass and the
underside of the ADF with a
cloth dampened with water.
Then, wipe the area with a soft,
dry cloth.
Maintenance
2
Open the ADF.
NOTE
Do not dampen the cloth too much, as this
may tear the document or damage the
machine.
10-5
3
Close the ADF.
● ADF
If your documents have black streaks or
appear dirty after copying them using the
ADF, this may be caused by pencil lead
rubbing off the documents and onto the
roller. Clean the ADF scanning area, film,
and roller.
1
CAUTION
Be careful not to get your fingers caught.
2
3
Turn off the main power switch
and disconnect the power cord.
Open the ADF cover.
A
10-6
Maintenance
Clean the rollers (A) inside the
ADF with a cloth dampened with
water. Then wipe the area with a
soft, dry cloth.
NOTE
6
Do not dampen the cloth too much, as this
may tear the document or damage the
machine.
4
Close the ADF cover.
CAUTION
Be careful not to get your fingers caught.
Close the ADF.
Open the ADF.
Maintenance
5
7
Clean the ADF scanning area (on
the left side of the platen glass)
and the document feeding roller
with a cloth dampened with
water. Then wipe the area with a
soft, dry cloth.
CAUTION
Be careful not to get your fingers caught.
8
10-7
Reconnect the power cord and
turn on the main power switch.
Replacing the Toner Cartridge
When the LCD displays <OUT OF
TONER/CHANGE TONER>, or toner
level is low by pressing [Toner Gauge],
redistribute toner in the toner
cartridge. If the message persists,
replace the toner cartridge.
2
Remove the toner cartridge.
Redistributing Toner
1
Lift the scanning platform until it
is locked (A), and open the
printer cover (B).
3
Gently rock the toner cartridge
five or six times to distribute
toner evenly.
A
Maintenance
B
10-8
4
Hold the toner cartridge by its
handle (A).
6
The arrow (A) on the toner cartridge should
be facing away from you and pointing
down.
Push the toner cartridge to make
sure it is properly set in the
machine.
A
CAUTION
– Do not open the drum protective shutter
on the toner cartridge. Print quality may
deteriorate if the drum surface is
exposed to light or is damaged.
7
Close the printer cover and
lower the scanning platform.
NOTE
– Always hold the toner cartridge by its
handle.
Maintenance
5
Insert the toner cartridge into
the machine as far as it will go.
Align the guide (A) on the left side of the
toner cartridge with the groove inside the
machine.
A
10-9
CAUTION
Be careful not to get your fingers caught.
Replacing the Toner
Cartridge with a New One
1
Lift the scanning platform until it
is locked (A), and open the
printer cover (B).
NOTE
Save the protective bag. You may need it
later when you remove the toner cartridge
from the machine.
4
Gently rock the toner cartridge
five or six times to distribute
toner inside.
A
B
2
Remove the new toner cartridge
from the protective bag.
5
Hold the toner cartridge with one
hand, and pull out the seal
completely.
Maintenance
3
Remove the toner cartridge.
NOTE
Do not pull out the seal at an angle.
10-10
6
Hold the toner cartridge by its
handle.
8
The arrow (A) on the toner cartridge should
be facing away from you and pointing
down.
Push the toner cartridge to make
sure it is properly set in the
machine.
A
CAUTION
Do not open the drum protective shutter on
the toner cartridge. Print quality may
deteriorate if the drum surface is exposed
to light or is damaged.
9
Close the printer cover and
lower the scanning platform.
NOTE
Always hold the toner cartridge by its
handle.
7
Maintenance
Insert the toner cartridge into
the machine as far as it will go.
Align the guide (A) on the left side of the
toner cartridge with the groove inside the
machine.
A
10-11
CAUTION
Be careful not to get your fingers caught.
Recycling Used Cartridges
Canon has instituted a worldwide recycling program for cartridges
called “The Clean Earth Campaign.” This program preserves
precious natural resources by utilizing a variety of materials found in
the used cartridges that are of no further use, to remanufacture new
cartridges which, at the same time, keeps the environment cleaner
by reducing landfill waste. Complete details concerning this program
are enclosed in each PC Cartridge box.
The Clean Earth Campaign
● THE Canon CARTRIDGE RECYCLING PROGRAM
The Canon Cartridge Recycling Program fulfills the first initiative of Canon’s Clean
Earth Campaign, which supports four critical environmental areas:
The remaining “Clean Earth” initiatives are supported in the U.S. through sponsorships
of the National Park Foundation, the National Wildlife Federation, and The Nature
Conservancy and in Canada through donations to the World Wildlife Fund Canada and
The Nature Conservancy of Canada.
10-12
Maintenance
● Recycling in the Workplace
● Conserving Environmental Resources
● Scientific Research and Education
● Encouraging Outdoors Appreciation
Since its inception, The Canon Cartridge Recycling Program has collected millions of
cartridges that otherwise would have been discarded into landfills or similar facilities.
Instead, this rapidly growing program returns used cartridges to the manufacturing
process, thus conserving an array of resources.
Becoming a part of this worthwhile program is easy. When your cartridge is of no
further use, simply follow the instructions detailed for U.S. or Canadian residents.
We appreciate your support of The Canon Cartridge Recycling Program.
Working together we can make a significant contribution to a cleaner planet.
Maintenance
● Cartridges collected through this program are not refilled.
● You are not entitled to a tax deduction or rebate for the return of empty cartridges.
● This program may be modified or discontinued without notice.
10-13
U.S.A. PROGRAM
● Packaging
■ Option A-1: Single Box Return
● Repackage the empty cartridge utilizing the wrapper and pulp mould end-blocks
from the new cartridge’s box.
● Place the empty cartridge in the box of your new cartridge. Seal the box.
■ Option B: Volume Box Return
We encourage you to use this option as a more efficient way to ship cartridges.
● Place as many cartridges as possible into one box.
Carefully seal the box with tape;
or
● Call 1-800-OK-Canon to receive your free eight cartridge collection box.
Maintenance
10-14
■ Option A-2: Multiple Box Return
We encourage you to use this option as a more efficient way to ship cartridges.
● Complete Option A-1.
● Bundle multiple cartridge boxes together securely with tape.
Please be sure that the shipment does not exceed UPS specifications.
Maximum weight = 70 lb. (31.8 kg)
Maximum length = 108 in. (2,743 mm)
Maximum girth (length + 2 x width + 2 x height) = 130 in. (3,302 mm)
If your shipment exceeds the above limits, please call 1-800-OK-Canon for special
shipping information.
Maintenance
Please Note:
Do not send defective cartridges for replacement.
Defective cartridges under warranty should be exchanged by an authorized dealer
or service facility as provided in the warranty.
10-15
● Shipping
Apply the UPS authorized returning label provided in this guide.
Residents of Alaska and Hawaii: Do not use the UPS authorized returning label. For
Alaska and Hawaii Canon set up alternative mail service with the U.S. Postal Service.
Please call 1-800-OK-Canon to receive U.S. Postal Service merchandise returning
label.
■ Option A: UPS Pick-up
● Give the shipment to your UPS driver when you receive your next regular delivery;
or
● Take the shipment to your local UPS receiving point.
■ Option B: MBE Drop off
Take the shipment to a participating MBE (Mail Boxes, Etc.) Center.
For location, please call 1-800-949-6660.
Maintenance
10-16
By using either of the above methods of shipment, your used cartridge(s) will
be forwarded to the Canon Cartridge Collection Center at no charge to you.
For further information about the Clean Earth Campaign in the United States, please
call: 1-800-OK-Canon
CANADA PROGRAM-CANADA PROGRAMME
Maintenance
■ Option A: Single Box Return
● Repackage the empty cartridge utilizing the wrapper and pulp mould end-blocks
from the new cartridge’s box.
● Place the empty cartridge in the box of your new cartridge. Seal the box.
● Apply the Canon Canada Inc./Canada Post label provided in this brochure.
Canon’s labels are specially marked so that Canon pays the postage.
● Deposit your empty cartridge in any full size street mailbox or take it to your local
Canada Post outlet or franchise.
■ Option B: Volume Box Return (eight or more cartridges)
We encourage you to use this option as a more efficient way to ship cartridges.
● Call 1-800-667-2666 to receive your free Canon collection box kit.
● The collection box can accommodate eight individual cartridge boxes.
● Place your eight individually packaged boxes of empty cartridges into the Canon
collection box. Seal the box.
10-17
● Apply the Canon Canada Inc./Canada Post label provided in this brochure.
● Canon’s labels are specially marked so that Canon pays the postage.
● Deliver to any local Canada Post outlet or franchise. Customers who hold a
Commercial pick-up agreement with Canada Post may have their collection box
picked up.
Working to preserve endangered species is a long-standing Canon interest.
To this end, for every cartridge collected, Canon Canada donates $1, shared equally
between World Wildlife Fund Canada and the Nature Conservancy of Canada. This
donation is utilized in Canada.
10-18
Maintenance
● For further information about The Clean Earth Campaign in Canada, please call or
write to Canon.
1-800-667-2666
Canon Canada Inc.
Corporate Customer Relations
6390 Dixie Road
Mississauga, ON L5T 1P7
Transporting the Machine
Follow this procedure to avoid
vibration damage to the machine when
transporting it over a long distance.
1
2
3
CAUTION
– To avoid exposing the toner cartridge to
light, place it in its protective bag or
wrap it in a thick cloth.
– Do not open the drum protective shutter
on the toner cartridge. Print quality may
deteriorate if the drum surface is
exposed to light or is damaged.
Turn off the main power switch.
Disconnect the power cord and
all the cables from the back of
the machine.
Lift the scanning platform until it
is locked (A), and open the
printer cover (B).
NOTE
Always hold the toner cartridge by its
handle.
5
Close the printer cover and
lower the scanning platform.
Maintenance
A
B
4
10-19
Remove the toner cartridge.
CAUTION
Be careful not to get your fingers caught.
6
7
8
Remove the dust cover from the
paper feeding tray.
Remove the paper from the
paper feeding tray.
9
10
Push the paper guide rail, and
then close the paper feeding
tray.
Detach the Document feeder
tray.
Maintenance
Store the dust cover inside the
machine.
10-20
11
12
Make sure all the covers are
closed.
Grip the handles on both sides
of the machine and lift it
carefully, as shown in the
illustration below.
Maintenance
13
Fold the paper stopper, and then
push the output tray extension
into the machine.
CAUTION
– Do not lift the machine by any of its
attachments. Dropping the machine can
cause personal injury.
– If you have a back problem, make sure
to check the weight of this machine
before carrying. (See “Specifications,”
on p. 13-1.)
10-21
11
Troubleshooting
Clearing Jams
When <CHECK DOCUMENT>, <PAPER JAM> or <PAPER JAM/OPEN REAR
COVER> appears on the LCD display, remove jammed paper from the machine
first, then from the paper feeding tray or multi-purpose tray if necessary. Check
the following if you experience repeated paper jams:
– Fan and tap the paper stack on a flat surface before loading it in the machine.
– Check that the paper you are using meets the requirements for use. (See “Print
Media,” on p. 3-1.)
– Make sure you have removed any scraps of paper from the inside of the machine.
Troubleshooting
CAUTION
– When removing jammed documents or paper,
take care not to cut your hands on the edges of
the document or paper.
– When removing jammed paper or when
inspecting the inside of the machine, do not allow
necklaces, bracelets, or other metal objects to
touch the inside of the machine, as this may
result in burns or electrical shock.
– If you tear the paper, remove any torn pieces to
avoid further jams.
– If loose toner comes into contact with your skin
or clothing, wash with cold water. Warm water
will set the toner.
NOTE
Do not force a jammed document or paper out of
the machine. Contact Canon Customer Care
Center if needed.
11-1
Document Jams
When <CHECK DOCUMENT> appears
on the LCD display, remove a jammed
document from the ADF.
1
Open the ADF cover.
2
Hold both sides of any jammed
documents and gently pull them
out straight upward.
4
Close the ADF cover.
CAUTION
Be careful not to get your fingers caught.
NOTE
Do not pull the document forcefully as it
may tear.
3
Hold both sides of any jammed
documents and gently pull them
out.
5
Open the ADF and then hold
both sides of any jammed
documents and gently pull them
out.
Troubleshooting
11-2
6
Close the ADF.
Paper Jams
When <PAPER JAM> or <PAPER JAM/
OPEN REAR COVER> appears on the
LCD display, remove jammed paper from
the inside of the machine first, then from
the paper feeding tray or multi-purpose
tray if necessary.
CAUTION
1
Remove the dust cover from the
paper feeding tray.
Be careful not to get your fingers caught.
Troubleshooting
2
11-3
Remove the paper in the paper
feeding tray.
3
5
Open the rear cover.
This operation is required only when
<PAPER JAM/OPEN REAR COVER>
appears on the LCD display.
Remove the toner cartridge from
the machine.
CAUTION
4
Lift the scanning platform until it
is locked (A), and open the
printer cover (B).
A
B
– Remove watches and any bracelets or
rings when touching the inside of the
machine. These items might be
damaged if they come into contact with
the parts inside of the machine.
– To avoid exposing the toner cartridge to
light, place it in its protective bag or wrap
it in a thick cloth.
– Do not open the drum protective shutter
on the toner cartridge. Print quality may
deteriorate if the drum surface is
exposed to light or is damaged.
NOTE
Always hold the toner cartridge by its
handle.
Troubleshooting
11-4
7
A
B
Gently pull the jammed paper
between the fixing assembly (A)
and transfer roller (B) until the
leading edge emerges from the
machine.
A
CAUTION
– Do not touch the fixing assembly (A) as it
becomes very hot during use.
– Do not touch the transfer roller (B) as this
can damage the machine.
6
B
Hold both sides of the jammed
paper and gently pull it out.
CAUTION
– Do not touch the fixing assembly (A) as it
becomes very hot during use.
– Do not touch the transfer roller (B) as this
can damage the machine.
Troubleshooting
8
11-5
Hold both sides of the jammed
paper and carefully pull it out.
9
Hold both sides of the jammed
paper and gently pull it out
upward.
This operation is required only when
<PAPER JAM/OPEN REAR COVER>
appears on the LCD display.
10
Hold both sides of the jammed
paper and slowly pull it out in
the direction of the arrow.
– When feeding paper from the paper
feeding tray:
– When feeding paper from the multipurpose tray:
If the jammed paper is badly folded, similar
to the folds of an accordion, ease the
jammed paper loose and then pull it out
from the machine.
Troubleshooting
11-6
11
Hold the toner cartridge by its
handle.
13
The arrow (A) on the toner cartridge should
be facing away from you and pointing
down.
Push down the toner cartridge to
make sure it is properly set in
the machine.
A
14
CAUTION
Close the printer cover and
lower the scanning platform.
Do not open the drum protective shutter on
the toner cartridge. Print quality may
deteriorate if the drum surface is exposed
to light or is damaged.
NOTE
Always hold the toner cartridge by its
handle.
Troubleshooting
12
Insert the toner cartridge into
the machine as far as it will go.
Align the guide (A) on the left side of the
toner cartridge with the groove inside the
machine.
A
11-7
CAUTION
Be careful not to get your fingers caught.
15
Close the rear cover.
16
This operation is required only when
<PAPER JAM/OPEN REAR COVER>
appears on the LCD display.
17
Load the paper into the paper
feeding tray.
Set the dust cover on the paper
feeding tray.
CAUTION
Be careful not to get your fingers caught.
NOTE
11-8
Troubleshooting
After all the procedures are completed, the
machine should be ready for operating. If
the machine returns to the standby mode,
troubleshooting has been successful. If the
machine does not return to the standby
mode, check if jammed paper is still left in
the machine.
LCD Messages
See the table below when the LCD displays error messages.
Common
Message
Troubleshooting
CANCEL : STOP/RESET
11-9
Description
Appears alternately with
other messages.
Action
Varies by the message that
appears. For details, see the
explanation for the message
(i.e., <LOAD CORRECT
PAPER>).
To cancel copy jobs, press
[Stop/Reset], then press
[
].
Message
CHANGE REG’D SIZE
-> PAPER SETTINGS
Description
The paper size selected in
<CASSETTE> or <MP
TRAY> of the <PAPER
SETTINGS> menu is not
correct.
Action
11-10
Troubleshooting
– For printing received documents, reports, or lists,
set the paper size to
<LTR>, <LGL>, <A4>,
<OFICIO>, <BRAZIL-OFICIO>, <MEXICO-OFICIO>, <FOLIO>,
<GOVERNMENT-LETTER>, <GOVERNMENTLEGAL>, or
<FOOLSCAP> in <CASSETTE> of the <PAPER
SETTINGS> menu. (See
“Setting Paper Size and
Type,” on p. 3-7.)
– For the two-sided printing
for faxing, set the paper
size to <LTR> or <A4> in
<CASSETTE> of the
<PAPER SETTINGS>
menu. (See “Setting
Paper Size and Type,” on
p. 3-7.)
– For the two-sided copying,
set the paper size to
<LTR> or <A4> in <CASSETTE> or <MP TRAY>
of the <PAPER SETTINGS> menu. (See “Setting Paper Size and Type,”
on p. 3-7.)
Message
Description
Action
A document jam may have
occurred in the ADF.
Remove the jammed
document.
CLOSE COVER
PRINTER COVER
The printer cover is not
closed completely.
Check the printer cover, and
make sure that it is
completely closed.
LIFT PANEL TO OPEN
OPEN PRINTER COVER
Appears alternately with
other messages.
Varies by the message that
appears. For details, see the
explanation for the message
(i.e., <OUT OF TONER/
CHANGE TONER>).
LOAD CORRECT PAPER
The size of the paper in the
paper feeding tray or multipurpose tray is different from
that of the paper specified in
<CASSETTE> or <MP
TRAY> of the <PAPER
SETTINGS> menu.
– Load the correct paper
size or change the paper
size in <CASSETTE> or
<MP TRAY> of the
<PAPER SETTINGS>
menu. For more information, see “Setting Paper
Size and Type,” on p. 3-7.
– If you are trying to print a
report or list, set the paper
size to <LTR>, <LGL>,
<A4>, <OFICIO>, <BRAZIL-OFICIO>, <MEXICOOFICIO>, <FOLIO>,
<GOVERNMENT-LETTER>, <GOVERNMENTLEGAL> or
<FOOLSCAP> and then
load paper of the same
size.
Then press [OK] to continue
printing.
Troubleshooting
CHECK DOCUMENT
11-11
Message
Action
LOAD PAPER
No paper is loaded in the
paper feeding tray or multipurpose tray, or not inserted
correctly.
Load paper in the paper
feeding tray or multi-purpose
tray. (See “Loading Paper,”
on p. 3-4.) Make sure the
paper stack in the paper
feeding tray does not exceed
the capacity of the paper
feeding tray.
Load paper in the multipurpose tray one by one.
If you load paper while
making copies, do not load a
different paper size.
On the second line in the
LCD the message
<CASSETTE> or <MP
TRAY> and the paper size
may appear. In this case,
load the corresponding
paper in the paper feeding
tray or multi-purpose tray.
LOST IMAGE
The data in memory was lost
when the machine was
turned on.
The error is automatically
released after two seconds,
and the machine
automatically prints out the
lost report that shows the
records still existing in the
activity report.
11-12
Troubleshooting
Description
Message
Description
Action
– The number of the
scanned document that
can be stored in memory
reached the maximum.
– The machine’s memory is
full of scanned documents
when you use the sort
copy function.
Divide the document and
copy each part separately.
OUT OF TONER
CHANGE TONER
– The toner cartridge is
almost empty.
– If <CONT. PRINTING> is
set to <OFF> in the
<PRINTER SETTINGS>
of the <FAX SETTINGS>
menu, the Fax printing
and printing reports are
interrupted when the
<OUT OF TONER/
CHANGE TONER>
appears.
– Replace with a new toner
cartridge.
– If you want to continue
printing without replacing
the toner cartridge, set
<CONT. PRINTING> to
<ON> in the <PRINTER
SETTINGS> of the <FAX
SETTINGS> menu. However, the toner cartridge is
almost empty, so you
should replace the toner
cartridge with a new one.
PAPER JAM
Paper jams have occurred in
the machine.
Clear the paper jam (See
“Clearing Jams,” on p. 11-1)
and reload paper in the
paper feeding tray or multipurpose tray. Then reset the
machine by opening the
printer cover and then
closing it.
Troubleshooting
MEMORY FULL
11-13
Message
Description
Action
PAPER JAM
OPEN REAR COVER
Paper jams have occurred in
the machine when making
two-sided coping or twosided printing.
Clear the paper jam (See
“Clearing Jams,” on p. 11-1.)
and reload paper in the
paper feeding tray or multipurpose tray.
Then reset the machine by
opening the printer cover
and then closing it.
PLEASE WAIT
This message appears when
the main power switch is
turned on or when the
machine is not ready for
printing.
Wait until the message
disappears.
REMOVE MP PAPER
Paper is loaded in the multipurpose tray.
Remove the paper from the
multi-purpose tray. The
machine will not print faxes,
reports, or lists when paper
is loaded in the multipurpose tray. They will be
stored in memory.
RESUME : OK
Appears alternately with
other messages.
Varies by the message that
appears. For details, see the
explanation for the message
(i.e., <LOAD PAPER>).
Troubleshooting
11-14
Description
Action
SYSTEM ERROR
EXXX
A system error has occurred.
<XXX> will be a three-digit
code that indicates a
particular type of error.
Turn off the main power
switch. Wait for at least five
seconds, and then turn it on
again. If the message
persists, turn off the main
power switch, disconnect the
power cord, and contact
Canon Customer Care
Center.
TONER IS NOT SET
INSERT TONER
A toner cartridge is not
installed or not installed
correctly.
Install the toner cartridge
correctly. (See “Replacing
the Toner Cartridge,” on
p. 10-8.)
WRONG NUMBER ENTRY
An invalid number was
entered in the <DATE&TIME
SETTING> of the <TIMER
SETTINGS> menu.
Enter a correct date or time.
Troubleshooting
Message
11-15
Facsimile
Message
Description
Action
The same recipient was
entered twice.
Select a different recipient.
CANNOT REGIST MORE
– Maximum number of
recipients (124) were
entered for broadcasting.
– Maximum number of
recipients (50) were registered for group dialing.
– Resend the document to
other recipients if necessary.
– Register a different onetouch speed dialing key
for group dialing.
CANNOT USE THIS KEY
Redialing is not available
with [Redial/Pause].
This message appears when
<RESTRICT REDIAL> is set
to <ON> in the <TX
SETTINGS> of the <FAX
SETTINGS> menu.
Dial the number manually.
CHECK TEL NUMBER
The fax number entered at
the second time is different
from the one entered at the
first time.
This message appears when
<CONFIRM NEW DEST.> is
set to <ON> in the <TX
SETTINGS> of the <FAX
SETTINGS> menu.
Check if the fax number is
correct, then enter the same
fax number as the first one
after pressing [Start].
HANG UP PHONE
External telephone is off the
hook.
Hang up the phone.
Troubleshooting
ALREADY REGISTERED
11-16
Description
Action
MEMORY FULL
– The memory becomes full
during sending or receiving the fax.
– The number of fax jobs
that can be stored in
memory reached the maximum.
– When sending the document, divide it into a few
parts or select a lower fax
resolution.
If you need more space,
wait for the machine to
send any remaining faxes.
– The machine memory can
store up to 256 fax jobs
including sending and
receiving jobs.
(Based on the condition
that the other party sends
the fax by the
imageCLASS MF4150
with ITU-T Standard Chart
No.1, standard mode.)
Wait for the machine to
send any faxes in
memory. Also print or
delete any documents in
memory.
NOT AVAILABLE
You pressed the one-touch
speed dialing key that has
already been registered,
when you specify a onetouch speed dialing key as
the group dial.
Check the information
registered under the onetouch speed dialing before
using.
Troubleshooting
Message
11-17
Message
Description
Action
NOT REGISTERED
No recipient is registered in
the selected speed dialing
key or code.
Select a registered key or
code. For more information,
“Registering One-Touch
Speed Dialing,” on p. 4-7 or
“Registering Coded Dialing,”
on p. 4-14.
RECEIVED IN MEMORY
The received fax documents
or the reports are in memory
because paper or toner ran
out, paper jams occurred, or
incorrect paper size was
loaded.
Load correct paper size in
the paper feeding tray,
replace the toner cartridge,
or clear the paper jams. For
more information, see the
following:
– “Loading Documents,” on
p. 2-4.
– “Replacing the Toner
Cartridge with a New
One,” on p. 10-10.
– “Clearing Jams,” on
p. 11-1.
REGISTERING KEY
CANNOT REGISTER
The selected one-touch
speed dialing key is already
used as the group dialing
key it is being assigned to.
Select a different one-touch
speed dialing key.
Troubleshooting
11-18
Printer
Message
Description
Action
Appears alternately with
other messages.
Varies by the message that
appears. For details, see the
explanation for the message
(i.e., <LOAD CORRECT
PAPER>).
To cancel printing from a
computer, see Chapter 3,
"System Monitor," in the
Advanced Guide.
PRINTER DATA ERROR
CHECK PRINTER
The data from the PC was
not printed.
Check if the software is
installed properly or if the
printer cable is properly
connected.
PRINTING
The printer is processing a
print job.
No action required. Wait for
printing to finish.
Troubleshooting
CANCEL : SYS.MONITOR
11-19
Error Codes
An error code is a four-digit code displayed on the LCD or in the bottom row of a
TX Report or an RX Report when an error occurs.
Ex.
JOB NO.
TYPE
NO.
0001
TX
001
DESTINATION TEL/ID
WEST-1
55555555
DATE
TIME
PAGE
TIME USE
04/10
16:00
002
02’21
MODE
ECM
RESULT
NG
00A0:TX CANCEL
Error Code
For details on TX Report and RX Report, see Chapter 4, “Reports and Lists,” in the
Advanced Guide.
See the table below for individual error codes.
Error Code
Description
Action
The sender may not be using a G3
fax machine.
Make sure the sender’s machine is
compatible with your machine.
0070
Reception was manually canceled
on the machine.
Ask the sender to resend the
document if necessary.
0071
The machine’s memory is full.
Print, send, or delete any
documents stored in memory.
0080
The recipient’s machine did not
respond within 35 seconds.
Resend the document. Ask the other
party to check their machine. If you
are making an overseas call, add a
pause to the number.
008D
The recipient’s machine has run out
of paper.
Ask the recipient to make sure that
paper is loaded in their machine.
00A0
Transmission was manually
canceled on the machine.
Resend the document if necessary.
00A1
There is a document jam.
Clear the document jam.
00FF
All redialing attempts have failed.
Check if the recipient’s number is
correct or the telephone cable is
properly connected, and try again.
11-20
Troubleshooting
0001
If You Cannot Solve a Problem
Customer Support (U.S.A.)
If you cannot solve the problem after having referred to the information in this chapter,
contact Canon Customer Care Center at 1-800-828-4040 between the hours of 8:00
A.M. to 8:00 P.M. EST Monday through Friday and 10:00 A.M. to 8:00 P.M. on
Saturday. On-line support for 24 hours is also available at the website.
http://www.canontechsupport.com/
Customer Support (Canada)
Troubleshooting
Canon Canada Inc., offers a full range of customer technical support options*:
– For step-by-step troubleshooting, e-mail technical support, the latest driver or
document downloads, and answers to frequently asked questions, visit
http://www.canon.ca/
– Free live technical support 9 A.M. to 8 P.M. EST Monday through Friday (excluding
holidays) for products still under warranty 1-800-652-2666
– For the location of the authorized service facility nearest you, visit
http://www.canon.ca/ or 1-800-652-2666
– If the problem cannot be corrected by using one of the above technical support
options, repair options are available at the time of your call to the live technical
support number above or via the website at http://www.canon.ca/
* Support program specifics are subject to change without notice.
11-21
Please have the following information ready when you contact Canon:
– Product name (imageCLASS MF4150)
– Serial number (On the label located at the back of the machine)
– Place of purchase
– Nature of problem
– Steps you have taken to solve the problem and the results
CAUTION
If the machine makes strange noises, emits smoke or odd odor, turn off the main power switch
immediately, disconnect the power cord, and contact Canon Customer Care Center. Do not attempt to
disassemble or repair the machine yourself.
NOTE
Attempting to repair the machine yourself may void the limited warranty.
Troubleshooting
11-22
12
Machine Settings
Machine Settings
You can adjust the machine settings from the Setting Menu to customize the way
the machine works. To see the list of current settings, print out User’s Data List.
Printing User’s Data List
1
2
Machine Settings
[OK]
1
2
12-1
Press [Additional Functions].
Press [
] or [
] to select <REPORT SETTINGS>, then press [OK].
3
4
[OK]
3
4
Press [
] or [
] to select <LIST PRINT>, then press [OK].
Press [
] or [
] to select <USER’S DATA LIST>, then press [OK].
Machine Settings
12-2
Accessing the Setting Menu
1
2
[OK]
1
2
Press [Additional Functions].
Press [
[OK].
] or [
Machine Settings
<PAPER SETTINGS>
<COMMON SETTINGS>
<COPY SETTINGS>
<TIMER SETTINGS>
<FAX SETTINGS>
<BROADCAST>
<ADDRESS BOOK SET.>
<ADJUST./CLEANING>
<REPORT SETTINGS>
12-3
] to select the menu you want to access, then press
5
3
[OK]
3
4
5
Press [
] or [
] to select a submenu, then press [OK].
To register the settings or go to a submenu item, press [OK].
When finished, press [Stop/Reset] to return to the standby mode.
NOTE
Press [Stop/Reset] to exit from the menu. If you press [Stop/Reset] before pressing [OK], the
setting will not be registered.
Machine Settings
12-4
Setting Menu
NOTE
Depending on the country of purchase, some settings may not be available.
PAPER SETTINGS
Setting Item
Description
1 CASSETTE
Sets the paper type and size on the paper feeding tray. (See
“Setting Paper Size and Type,” on p. 3-7.)
2 MP TRAY
Sets the paper type and size on the multi-purpose tray. (See
“Setting Paper Size and Type,” on p. 3-7.)
COMMON SETTINGS
Setting Item
Description
Selects which standby display appears when the main
power switch is turned on.
– COPY
– FAX
– SCAN
2 TONER SAVER MODE
Sets whether to reduce toner consumption.
– OFF
– ON
3 DISPLAY LANGUAGE
Selects the language on the display.
(See “Specifications,” on p. 13-1.)
Machine Settings
1 DEFAULT SETTINGS
12-5
COMMON SETTINGS
4 VOLUME CONTROL
Sets volumes for machine beeps in four levels.
– NORMAL
– HIGH
– OFF
– LOW
CALLING TONE
Sets the calling volume.
MONITOR VOL. CTRL
Sets the line monitor volume.
ENTRY TONE
Sets the keypad volume.
ERROR TONE
Sets the alarm volume.
COPY SETTINGS
Setting Item
1 STANDARD SETTINGS
DENSITY
Description
Sets the default setting for copying.
Sets the density for copying.
– MANUAL (1-9)
– AUTO*
* When <AUTO> is set, the Image Quality mode is automatically
set to <TEXT>.
IMAGE QUALITY
Sets the document type for copying.
– TEXT/PHOTO*
– TEXT
– PHOTO*
– TEXT/PHOTO+*
AUTO COLLATE
Sets whether to collate the copies automatically.
– OFF
– ON
2 - SIDED
Sets the type of two-sided printing.
– OFF
– ON
12-6
Machine Settings
* When <TEXT/PHOTO>, <PHOTO>, or <TEXT/PHOTO+> is set,
the Density mode is automatically set to <MANUAL>.
COPY SETTINGS
2 PAPER SIZE GROUP
Selects a paper size group for your machine.*
– INCHES
– A
– AB
* If the paper size group is changed, the available preset copy
ratios will also change.
TIMER SETTINGS
Setting Item
Description
Sets auto sleep when the machine remains idle for a certain
period of time. (3 MIN.–30 MIN.) (See “Setting the Sleep
Mode,” on p. 1-11.)
– ON
– OFF
2 DATE&TIME SETTING
Sets the current date and time. (See “Connect Power Cord,”
in the Starter Guide.)
3 DATE TYPE SELECT
Sets the date format.
– MM/DD/YYYY
– DD/MM YYYY
– YYYY MM/DD
4 DAYLIGHT SV. TIME
Sets daylight saving time mode. (See “Setting Daylight
Saving Time,” on p. 1-14.)
– OFF
– ON
Machine Settings
1 AUTO SLEEP
12-7
FAX SETTINGS
Setting Item
1 BASIC SETTINGS
Description
Registers your fax number and name.
UNIT TELEPHONE #
Registers your fax number. (See “Set the Machine for
Sending Faxes,” in the Starter Guide.)
UNIT NAME
Registers your name/company name. (See “Set the
Machine for Sending Faxes,” in the Starter Guide.)
STANDARD SETTINGS
Sets the default setting for faxing.
DENSITY
Sets the default density for faxing. (1-9)
IMAGE QUALITY
Sets the default image quality for faxing.
– STANDARD
– FINE
– PHOTO
– SUPER FINE
2 TX SETTINGS
AUTO REDIAL
ON
Sets the transmission functions.
Sets whether to redial automatically when the other line is
busy or a transmission error occurs. (See Chapter 1,
“Advanced Fax Features,” in the Advanced Guide.)
Customizes the redial operation.
REDIAL TIMES
Sets the number of retries. (1 TIMES–10 TIMES)
REDIAL
INTERVAL
Sets period of time before redialing. (2 MIN.–99 MIN.)
OFF
Machine Settings
DIALING LINE CHCK
After the first attempt at dialing fails, redialing is not
attempted.
Sets whether to check the telephone line condition.
– OFF
– ON
12-8
FAX SETTINGS
RESTRICT REDIAL
Sets whether to disable the redial function of the [Redial/
Pause] key.
– OFF
– ON
CONFIRM NEW DEST.
Sets whether to prompt you to enter the fax number again
after pressing [Start] key.
– OFF
– ON
3 RX SETTINGS
INCOMING RING
The telephone does not ring when it receives a voice call.
ON
The telephone rings when it receives a voice call if an
external telephone is connected.
RX PRINT
Machine Settings
Sets whether the telephone rings when it receives a voice
call, enabling you to answer the call. This function is only
available when the <RX MODE> is set to <FaxOnly>.
OFF
RING COUNT
12-9
Sets the reception functions.
Sets the number of incoming ring before the machine
answers. (1 TIMES–16 TIMES)
Sets whether to store all received pages in memory before
printing them out or print each page as it is received. (See
Chapter 1, “Advanced Fax Features,” in the Advanced
Guide.)
MEMORY RX
Print after all the pages of the document are received.
PRINT RX
Print each page as it is received.
FAX SETTINGS
RX MODE
Selects the receive mode. (See Chapter 1,“Advanced Fax
Features,” in the Advanced Guide.)
– FaxOnly
– AnsMode
– DRPD
– FAX/TEL
– MANUAL
RX TERMINAL ID
Sets whether to insert the machine’s fax number and the
sender information on received faxes.
– OFF
– ON
RX RESTRICTION
You can reject faxes from senders with no fax/telephone
number in their sender information. (See Chapter 1,
“Advanced Fax Features,” in the Advanced Guide.)
OFF
All receptions are conducted.
ON
Receives the fax only from the sending fax machine that
sends the TSI signal.
REMOTE RX
Sets whether to use remote receiving. (See Chapter 1,
“Advanced Fax Features,” in the Advanced Guide.)
– ON
– OFF
Machine Settings
12-10
FAX SETTINGS
4 PRINTER SETTINGS
RX REDUCTION
Sets the printer functions.
Sets whether to reduce or truncate the image when a faxed
page is larger than the size of paper loaded. (See Chapter 1,
“Advanced Fax Features,” in the Advanced Guide.)
ON
Reduces the image to fit on the size of paper loaded.
OFF
Retains the original size of the image.
CUT
The image that is larger than 1-page record area is cut and
not recorded.
CONT. PRINTING
Sets whether to continue printing when toner has run out.
This function is only for Fax printing and printing reports.
(See Chapter 5,“Troubleshooting,” in the Advanced Guide.)
– OFF
– ON
2 - SIDED PRINT
Sets the type of two-sided printing for faxing. (See Chapter 1,
“Advanced Fax Features,” in the Advanced Guide.)
– OFF
– ON
5 COMMUNICATIONS
Machine Settings
TEL LINE TYPE
12-11
Sets the communication setting.
Selects the telephone line type. (See “Set the Machine for
Sending Faxes,” in the Starter Guide.)
TOUCH TONE
The telephone line is set for touch tone dialing.
ROTARY PULSE
The telephone line is set for rotary pulse dialing.
BROADCAST
Setting Item
BROADCAST
Description
Registers destinations for broadcasting.
ADDRESS BOOK SET.
Setting Item
1 1-TOUCH SPD DIAL
Description
Registers the information on one-touch speed dialing. Up to
8 destinations can be registered. (See “Registering OneTouch Speed Dialing,” on p. 4-7.)
NAME
Registers the recipient’s name (max. 20 characters,
including spaces).
TEL NUMBER ENTRY
Registers the recipient’s fax number (max. 50 digits,
including spaces).
2 CODED DIAL
Registers the information on coded dialing. Up to 100
destinations can be registered. (See “Registering Coded
Dialing,” on p. 4-14.)
NAME
Registers the recipient’s name (max. 20 characters,
including spaces).
TEL NUMBER ENTRY
Registers the recipient’s fax number (max. 50 digits,
including spaces).
3 GROUP DIAL
Registers the group name (max. 20 characters, including
spaces).
12-12
Machine Settings
NAME
Registers the information on group dialing. Up to 50
destinations can be registered. (See “Registering Group
Dialing,” on p. 4-21.)
ADJUST./CLEANING
Setting Item
Description
1 FIX.UNIT CLEANING
Cleans the fuser roller. (See “Fuser Roller,” on p. 10-4.)
2 SPECIAL MODE T
Sets whether to prevent blur from appearing on the
printouts.
When this setting is set to <on>, the density of printouts may
become light.
– OFF
– ON
3 SPECIAL MODE U
Select to improve print quality in high temperature and high
humidity conditions or in low temperature and low humidity
conditions.
OFF
Select in normal condition.
MODE1
Select to improve print quality in low temperature and low
humidity conditions, or when using thick paper or an
envelope.
MODE2
Select to improve print quality in high temperature and high
humidity conditions.
Machine Settings
4 SPECIAL MODE V
12-13
Sets whether to prevent small size paper (B5, A5,
EXECUTIVE, etc) from being curled.
– OFF
– ON
REPORT SETTINGS
Setting Item
1 SETTINGS
Description
Sets the report functions. (See Chapter 4, “Reports and
Lists,” in the Advanced Guide.)
TX REPORT
Sets whether the fax transmission report prints out.
– PRINT ERROR ONLY
– OUTPUT NO
– OUTPUT YES
RX REPORT
Sets whether the fax reception report prints out.
– OUTPUT NO
– OUTPUT YES
– PRINT ERROR ONLY
ACTIVITY REPORT
Sets whether to automatically print the fax transaction
report.
– OUTPUT YES
– OUTPUT NO
2 LIST PRINT
Prints reports/lists.
Prints the fax transmission report manually.
RX REPORT
Prints the fax reception report manually.
ACTIVITY REPORT
Prints the fax transaction report manually.
MEMORY DATA LIST
Prints the list of the reserved jobs in memory.
MEMORY IMAGE PRNT
Prints the information and image of the first page of the
reserved job.
1-TOUCH LIST
Prints the list of fax/telephone numbers and names
registered for one-touch speed dialing.
CODED DIAL LIST
Prints the list of fax/telephone numbers and names
registered for coded dialing.
GROUP DIAL LIST
Prints the list of groups registered for group dialing.
USER’S DATA LIST
Prints the setting list registered in the menu. (See “Printing
User’s Data List,” on p. 12-1.)
Machine Settings
TX REPORT
12-14
13
Appendix
Specifications
General
Personal Desktop
● Power Source
120 - 127 V, 60 Hz (Power requirements differ
depending on the country in which you purchased the
product.)
● Power Consumption
Max: Less than 680 W
● Warm-up Time
Less than 9.0 sec.* (temperature: 68°F (20°C),
humidity: 65%; from when the main power switch is
turned on until standby display appears)
* Warm-up time may differ depending on the condition
and environment of the machine.
● Weight
Approx. 29.5 lb (13.4 kg) (including toner cartridge)
● Dimensions
14 5/8 in. (H) x 17 in. (D) x 15 3/8 in. (W)
(370mm (H) x 432 mm (D) x 390 mm (W))
(with the document feeder tray attached)
● Installation Space
33 5/8 in. (D) x 23 1/4 in. (W)
(855 mm (D) x 590 mm (W))
Appendix
● Type
13-1
General
● Environmental
Conditions
Temperature: 46°F–95°F (7.5°C–35°C)
Humidity: 5%–90% RH
● Display Languages
ENGLISH/FRENCH/SPANISH/PORTUGUESE
● Acceptable
Documents
» p. 2-1.
● Acceptable Paper
Stock
» p. 3-1.
● Printable Area
» p. 3-2.
● Scanning Area
» p. 2-3.
Copier
TEXT/PHOTO mode: 300 dpi x 300 dpi
TEXT mode, PHOTO mode, TEXT/PHOTO+ mode:
600 dpi x 600 dpi
● Printing Resolution
600 dpi x 600 dpi
● Magnification
1:1 ± 1.0%, 1:2.00, 1:1.29, 1:0.78, 1:0.64, 1:0.50
Zoom 0.50–2.00, 1% increments
● First Copy Time
Platen glass: less than 9 sec. (LTR)
● Copy Speed
Direct: LTR 21 cpm
● No. of Copies
Max. 99 copies
Appendix
● Scanning Resolution
13-2
Printer
● Printing Method
Indirect electrostatic method (On-demand fixing)
● Paper Handling
– Paper feeding tray: 250 sheets
(Height: max. 1" (25 mm))
– Multi-purpose tray: 1 sheet
● Paper Delivery
100 sheets (17 to 21 lb bond (64 to 80 g/m2))
● Print Speed
See “Copy Speed,” on p. 13-2.
● Printing Resolution
600 dpi x 600 dpi
● Number of Tones
256
● Toner Cartridge
» p. 1-8.
Facsimile
Public Switched Telephone Network (PSTN)*1
● Compatibility
G3
● Data Compression
Schemes
MH, MR, MMR
● Modem Speed
33.6 Kbps
Automatic fallback
● Transmission Speed
Approx. 3 seconds/page*2 at 33.6 Kbps, ECM-MMR,
transmitting from the memory
● Transmission/
Reception Memory
Maximum approx. 256 pages*2
(total pages of transmission/reception)
Appendix
● Applicable Line
13-3
Facsimile
● Fax Resolution
STANDARD: 203 pels/in. x 98 lines/in. (8 pels/mm x
3.85 lines/mm)
FINE: 203 pels/in. x 196 lines/in. (8 pels/mm x
7.7 lines/mm)
PHOTO: 203 pels/in. x 196 lines/in. (8 pels/mm x
7.7 lines/mm)
SUPER FINE: 203 pels/in. x 392 lines/in. (8 pels/mm x
15.4 lines/mm)
● Dialing
– Speed dialing
One-touch speed dialing (8 destinations)
Coded dialing (100 destinations)
Group dialing (50 destinations)
Address Book dialing (with Address Book key)
– Regular dialing (with numeric keys)
– Automatic redialing
– Manual redialing (with Redial/Pause key)
– Sequential broadcast (124 destinations)
– Automatic reception
– Remote reception by telephone (Default ID: 25)
– ACTIVITY REPORT (after every 60 transactions)
– TX (Transmission)/RX (Reception) REPORT
– TTI (Transmit Terminal Identification)
Appendix
13-4
Telephone
● Connection
– External telephone/answering machine/data modem
*1 The Public Switched Telephone Network (PSTN) currently supports 28.8 Kbps
modem speed or lower, depending on telephone line conditions.
2
* Based on ITU-T Standard Chart No. 1, MMR standard mode.
NOTE
Appendix
Specifications are subject to change without notice.
13-5
Index
Symbols & Numerics
Clearing Jams 11-1
Document jams 11-1
Paper jams 11-3
[2-Sided] key 1-4
A
[Coded Dial] key 1-6, 4-31
Accessing
Coded dialing 4-6
Deleting 4-19
Editing 4-16
Registering 4-14
Using 4-31
Setting Menu 12-3
[Additional Functions] key 1-4
[Address Book] key 1-6
ADDRESS BOOK SET. 12-3, 12-12
[Collate/2 on 1] key 1-4
ADF 2-6
COMMON SETTINGS 12-3, 12-5
ADF (Automatic Document Feeder) 1-1
[COPY] key 1-4
ADJUST./CLEANING 12-3, 12-13
Copy Mode 1-7
COPY SETTINGS 12-3, 12-6
B
Copying 6-1
BROADCAST 12-3, 12-12
Customer support
Canada xvi, 11-21
U.S.A. xvi, 11-21
C
CHANGE TONER message 10-8
Clean Earth Campaign 10-12
D
Cleaning machine 10-1
Daylight saving time 1-14
Exterior 10-1
Fuser roller 10-4
Interior 10-2
Scanning area 10-5
Copying 6-4
Faxes 4-5
[Density] key 1-4
Appendix
[Clear] key 1-5
Density
13-6
Document
Jams 11-1
Loading 2-4
Requirements 2-1
G
Group dialing 4-6
Adding destination 4-23
Changing name 4-26
Deleting destination 4-24
Deleting group 4-28
Registering 4-21
Using 4-30
Document delivery tray 1-1
Document feeder tray 1-1
Dust cover 1-2
E
[Energy Saver] key 1-4
[Enlarge/Reduce] key 1-4
Error codes 11-20
Error indicator 1-5
Error messages
Common 11-9
Facsimile 11-16
Printer 11-19
H
Handling xiii
[Hook] key 1-6, 4-33
I
If You Cannot Solve a Problem 11-21
Image quality
Copying 6-3
Faxes 4-3
External device jack 1-3
[Image Quality] key 1-4
F
[FAX] key 1-4
Fax Mode 1-7
FAX SETTINGS 12-3, 12-8
Faxes
Appendix
Receiving 5-1
Sending 4-1
13-7
J
Jams
Document 11-1
Paper 11-3
L
One-touch speed dialing 4-6
Deleting 4-12
Editing 4-9
Registering 4-7
Using 4-30
LCD 1-5, 1-7
Messages 11-9
Loading
Document 2-4
Envelopes 3-4
Paper 3-4
Location xiv
Operation panel 1-1, 1-4
OUT OF TONER message 10-8
Output tray 1-1
Output tray extension 1-2
M
Machine Components 1-1
Machine settings 12-1
Main power switch 1-2
Maintaining
Toner cartridge 1-9
Maintenance xiii, 10-1
Manual Sending 4-32
Menu
Accesing 12-3
Setting 12-5
Multi-purpose tray 1-2, 3-4
P
Paper
Guidelines 3-3
Jams 11-3
Loading 3-4
Printable area 3-2
Requirements 3-1
Size and type 3-7
Paper feeding tray 1-1
Paper guide rail 1-2
PAPER JAM message 11-3
PAPER SETTINGS 12-3, 12-5
Paper stopper 1-2
N
PC Faxing 9-1
Numeric keys 1-5
Platen glass 1-2, 2-4
Power socket 1-3
O
Power supply xv
[OK] key 1-5
Printing 7-1
One-Touch Speed Dial keys 1-6
Processing/Data indicator 1-5
Appendix
13-8
R
Slide guides 1-1, 2-6
for multi-purpose tray 1-2
Rear cover 1-3
Receiving faxes 5-1
Specifications 13-1
Copier 13-2
Facsimile 13-3
General 13-1
Printer 13-3
Telephone 13-5
Recycling cartridge 10-12
CANADA PROGRAM 10-17
U.S.A. PROGRAM 10-14
[Redial/Pause] key 1-6
Redistributing toner 10-8
Speed dialing 4-6
Registering speed dialing 4-6
Standby mode
Replacing toner cartridge 10-8
Copy 1-7
Fax 1-7
Scan 1-7
REPORT SETTINGS 12-3, 12-14
RX SETTINGS 12-9
[Start] key 1-5
S
[Stop/Reset] key 1-5
Safety instructions xiii
[System Monitor] key 1-4
[SCAN] key 1-4
Scan Mode 1-7
T
Scan settings
Telephone line jack 1-3
Copying 6-3
Faxes 4-3
TIMER SETTINGS 12-3, 12-7
Timer settings 1-11
Scanning 8-1
[Tone] key 1-5
Scanning area 1-2, 2-3
Toner cartridge 1-8
Scanning platform 1-2
Sending faxes 4-1
Setting Menu 12-5
Accessing 12-3
Appendix
Sleep Mode 1-11
13-9
Checking the toner level 1-10
Maintaining 1-9
Recycling 10-12
Redistributing 10-8
Replacing 10-10
[Toner Gauge] key 1-5
Transporting machine 10-19
Troubleshooting 11-1
TX SETTINGS 12-8
U
USB port 1-3
User’s Data List 12-1
Printing 12-1
Using speed dialing 4-30
V
[View Settings] key 1-4
Z
Zoom ratio 6-6
Preset zoom 6-6
Zoom designation 6-7
Appendix
13-10
CANON INC.
30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
CANON U.S.A., INC.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
CANON CANADA INC.
6390 Dixie Road Mississauga, Ontario L5T 1P7, Canada
CANON EUROPA N.V.
Bovenkerkerweg 59-61 1185 XB Amstelveen, The Netherlands
CANON FRANCE S.A.S.
17, quai du Président Paul Doumer 92414 Courbevoie Cedex, France
CANON COMMUNICATION & IMAGE FRANCE S.A.S.
12, rue de l’Industrie 92414 Courbevoie Cedex, France
CANON (U.K.) LTD.
Woodhatch, Reigate, Surrey, RH2 8BF, United Kingdom
CANON DEUTSCHLAND GmbH
Europark Fichtenhain A10, 47807 Krefeld, Germany
CANON ITALIA S.p.A.
Via Milano, 8 20097 San Donato Milanese (MI) Italy
CANON ESPAÑA, S.A.
c/ Joaquín Costa 41, 28002 Madrid, Spain
CANON LATIN AMERICA, INC.
703 Waterford Way Suite 400, Miami, Florida 33126 U.S.A.
CANON AUSTRALIA PTY. LTD
1 Thomas Holt Drive, North Ryde, Sydney, N.S.W. 2113, Australia
CANON CHINA CO., LTD
15F Jinbao Building No.89 Jinbao Street, Dongcheng District, Beijing 100005, China
CANON SINGAPORE PTE. LTD.
1 HarbourFront Avenue #04-01 Keppel Bay Tower, Singapore 098632
FT5-0271 (010)
© CANON INC. 2006
PRINTED IN JAPAN OR KOREA
Download PDF

advertising