User`s guide | Canon MF5750 All in One Printer User Manual

Remote UI Guide
Please read this guide before operating this equipment.
After you finish reading this guide, store it in a safe
place for future reference.
Manuals for the Machine
The manuals for this machine are divided as follows. Please refer to them for detailed information.
Depending on the system configuration and product purchased, some manuals may not be needed.
Guides with this symbol are printed manuals.
CD-ROM
• Setting Up the Machine
• Software Installation
• Network Setting (Only for the MF5770 model.)
Guides with this symbol are PDF manuals included on the
accompanying CD-ROM.
Set-Up Sheet
• Introduction on Machine Use
Quick Reference Guide
• Copying and Printing Instructions
• Troubleshooting
User’s Guide
• Fax Instructions
• Troubleshooting
CD-ROM
Facsimile Guide
Only for the MF5750/MF5770 models.
• Software Installation and Instructions
• Printing, Scanning and PC Faxing Instructions
• Troubleshooting
• Remote User Interface Instructions
Software Guide
CD-ROM
Remote UI Guide
(This Manual)
CD-ROM
Only for the MF5770 model.
• Network Connectivity and Setup Instructions
Network Guide
CD-ROM
Only for the MF5770 model.
• To view the manual in PDF format, Adobe Reader/Acrobat Reader/Acrobat is required. If Adobe Reader/Acrobat Reader/Acrobat is not installed on your
system, please download it from the Adobe Systems Incorporated website.
Contents
Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv
How to Use This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv
Symbols Used in This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv
Keys Used in This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv
Displays Used in This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .v
Abbreviations Used in this Manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .v
Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .v
Chapter 1
Using the Remote UI
Overview of the Remote UI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
Before You Start the Remote UI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
Starting the Remote UI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
Chapter 2
Remote UI Functions
Device Status and Information Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Managing Jobs and Viewing the Job Log. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Managing Print Jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Viewing the Activity Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
Viewing and Editing Device Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6
Viewing and Editing the Address Book. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7
Viewing and Editing One-Touch or Coded Speed Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7
Importing/Exporting the Address Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13
Viewing Additional Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-20
Chapter 3
Appendix
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
iii
Preface
Thank you for purchasing the Canon LaserBase MF5770. Please read this manual thoroughly before operating
the machine in order to familiarize yourself with its capabilities, and to make the most of its many functions. After
reading this manual, store it in a safe place for future reference.
How to Use This Manual
Symbols Used in This Manual
The following symbols are used in this manual to explain procedures, restrictions, handling
precautions, and instructions that should be observed for safety.
IMPORTANT
Indicates operational requirements and restrictions. Be sure to read these items
carefully in order to operate the machine correctly, and to avoid damage to the
machine.
NOTE
Indicates a clarification of an operation, or contains additional explanations for a
procedure. Reading these notes is highly recommended.
Keys Used in This Manual
The following symbols and key names are a few examples of how keys to be pressed are expressed in
this manual:
• Operation Panel Keys ........................................................... [Key Name]
Example ........................................................................... [Start]
[Stop/Reset]
• Display Keys ......................................................................... [Key Name]
Example ........................................................................... [Cancel]
[Done]
iv
Displays Used in This Manual
The keys which you should press are marked with
, as shown below.
When multiple keys or buttons can be pressed, they will be highlighted and mentioned in the order in
which they should be pressed.
1
Click [OK].
Click this button
for operation.
Screen shots of computer operation screens used in this manual may differ from the ones you actually
see depending on the model or options that come with your machine.
Abbreviations Used in this Manual
In this manual, product names and model names are abbreviated as follows:
Microsoft® Windows® 98 operating system:
Microsoft® Windows® 98 Second Edition operating system:
Microsoft® Windows® Millennium Edition operating system:
Microsoft® Windows® 2000 operating system:
Microsoft® Windows® XP operating system:
Microsoft® Windows Server™ 2003 operating system:
Windows 98
Windows 98SE
Windows Me
Windows 2000
Windows XP
Windows Server 2003
Trademarks
Canon and the Canon logo are trademarks of Canon Inc.
Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and
other countries.
Other company or product names used in this manual and not included in the list above are trademarks
of those companies and may be registered in certain jurisdictions.
Copyright © 2005 by Canon Inc. All rights reserved
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or by any information storage or retrieval system
without the prior written permission of Canon Inc.
v
1
Using the Remote UI
CHAPTER
This chapter describes the features of the Remote UI, and how to start it.
Overview of the Remote UI
The Remote UI (User Interface) software allows you to access and manage a machine connected to a
network using a web browser. If you specify the address of the machine in your web browser, the
Remote UI screen appears from where you can manage and control the machine.
The machine is supplied with preinstalled web server software that enables you to use the Remote UI.
You do not need any special software, other than a web browser, installed on your computer. You can
use the Remote UI when you start your web browser by entering the IP (Internet Protocol) address for
the machine.
PC Screen Shots
PC Connected to Network
The Machine
You can operate the machine from the operation panel.
1-1
CHAPTER
■ Checking the [Device Status] from a network computer
The Remote UI enables you to access the machine via a network, enabling you to display the current status for the
machine, and the status of all information and job processing. You can manage the machine from a personal
computer connected to the network, without having to perform operations on the machine itself.
When you specify the IP address of the machine with your web browser, the Remote UI top page appears as shown
below.
Using the Remote UI
1
After you have selected the logon mode, the [Device Manager] page is displayed. In the left frame of this page, the
following buttons to access other pages of the Remote UI will be displayed.
Takes you to the Remote UI top page.
Displays the current status of the machine, and the logon form for selecting the
mode to use.
Displays the [Device Manager] menus. The [Device Manager] menus include
[Status], [Information], [Features], [Network] and [Counter] pages.
Displays the [Job Manager] menus. The [Job Manager] menus include [Print Job]
and [Activity Log] pages.
Displays the [Device Settings] menus. The [Device Settings] menus include
[Common Settings], [Printer Settings], [Copy Settings] and [Fax Settings] pages.
Displays the [Address Book] menus. The [Address Book] menus include [One-touch
Speed Dial], [Coded Dial] (fax numbers, destination names, etc.) and [Import/
Export] pages.
1-2
Displays links to support information, such as the online manual.
Updates or refreshes the currently displayed screen with the
latest information. Information is not updated automatically. When you click this
button, the latest information from the machine is acquired.
Displays the online help for the Remote UI. Click this button to access detailed
information about the Remote UI.
Takes you back to the top of a current page.
Takes you back to the previous page.
■ Set and control the machine from a PC
The Remote UI enables you to view and delete print jobs that are being processed by the machine or waiting to be
printed, and change various settings. If you logon using the [Administrator Mode], you can adjust settings and
control the machine from a PC without using the operation panel on the machine.
System Requirements
The system requirements for the Remote UI are as follows:
■ Windows
• OS
- Microsoft Windows 98/98SE
- Microsoft Windows 2000
- Microsoft Windows Me
- Microsoft Windows XP
- Microsoft Windows Server 2003
• Web Browser
- Microsoft Internet Explorer 5.01 Service Pack 1 or later
- Netscape Navigator 6.0 or later
NOTE
Apart from the software listed above, no other software, such as a web server, is necessary. (The machine
includes its own web server software.)
1-3
Using the Remote UI
1
Before You Start the Remote UI
Before you start the Remote UI, check the following:
■ Network Settings
Select <VIEW IP ADDRESS> from the <NETWORK SETTINGS> menu, and verify the IP address of the machine.
If you do not know the IP address, consult with your network administrator. (See Chapter 2, "Specifying the Network
Settings," in the Network Guide.)
1
IMPORTANT
Using the Remote UI
• Connection via a proxy server is not possible. If your system environment has a proxy server, perform the following
•
•
settings. (Settings vary according to the system environment, so please consult with your network administrator.)
- Enter the device IP address into Exceptions in the web browser proxy server settings.
- Set your web browser to enable all cookies.
If the operation panel of the machine is being used, do not perform the same operations from the Remote UI.
If multiple Remote UIs are running simultaneously, the latest setting made is enabled. It is recommended that only
one Remote UI be running at the same time.
Starting the Remote UI
To start the Remote UI, follow the procedure described below.
1
Start your web browser.
2
Enter the URL into the address bar of a web browser.
http://<the IP address of the machine>/
The Remote UI screen loads.
1-4
NOTE
• If the page is not shown correctly, select [Internet Options] from the [Tools] menu on the browser menu. Click
•
3
[Settings] in the [General] tab ➞ click [Every visit to the page] in the [Settings] dialog box. If you click [Never] here,
you could be viewing outdated content stored in the browser cache.
If the browser screen switches slowly, select [Refresh] from the [View] menu on the browser menu.
Select the logon mode.
Administrator Mode: Select the radio button ➞ enter the password.
End-User Mode: Select the radio button ➞ enter the owner name.
NOTE
To specify or change passwords, click [Device Manager] - [Information] ➞ click [Change...] on the right side of the
[Security] section. Enter passwords for each the [Old Password], [New Password] and [Confirm] section in the
[Change Security Information] screen ➞ click [OK]. You can enter a password which discriminates between
lowercase and uppercase up to 15 characters.
You can adjust the [Device Manager] - [Information] only when you are using the [Administrator Mode].
4
Click [OK].
The [Device Manager] - [Status] page appears.
1-5
Using the Remote UI
1
Remote UI Functions
2
CHAPTER
This chapter describes the various functions of the Remote UI, along with brief descriptions of how to use them.
Device Status and Information Display
Using the Remote UI (User Interface), you can view the current status of the machine, such as the
amount and size of paper in the cassette/multi-purpose feeder, or other status information. You can
also view information about the device administrator, the installation location and various machine
settings.
CHAPTER
NOTE
If you change the IP (Internet Protocol) address on the web browser (Remote UI), the change will not be reflected
on the display of the machine. The change become effective after the machine is restarted.
You can confirm the change of the IP address by checking <VIEW IP ADDRESS> under the <NETWORK
SETTINGS> menu, (See Chapter 2, “Specifying the Network Settings,” in the Network Guide.) or by printing the
USER DATA LIST.
1
Click [Device Manager] ➞ select the item to display from the menu that appears under [Device Manager].
[Status]:
Displays the current status of the machine and paper information, such as the
amount and size of paper in the cassette/multi-purpose feeder, and allows you
to view error information.
[Information]:
Displays information about the machine, including information about the
administrator, and any security settings that have been enabled. If you are
using [Administrator Mode], you can also adjust these settings.
2-1
[Features]:
Displays information about various features and expansion options for the
machine, including the maximum print speed, total and available memory, Flash
ROM (if installed), and number of cassettes installed.
[Network]:
Displays information about the [Network Interface] and any network protocols
that are enabled. If you are using [Administrator Mode], you can also adjust
these settings.
[Counter]:
Displays the number of pages that has been output from the machine.
The information for the selected item is displayed.
(Example) When [Network] is selected:
Remote UI Functions
2
2-2
Managing Jobs and Viewing the Job Log
The Remote UI enables you to manage print jobs. It also allows you to view the sending and receiving
results of fax jobs. The [Job Manager] menu includes the following pages:
• Print Job
• Activity Log
Managing Print Jobs
NOTE
• If you logon in the [End-User Mode], you will only see jobs and adjust the job settings for which you have owner
privileges.
• To enable to adjust the job settings when logged on in the [End-User Mode], set the “Permit End-user's Job
Operation” option in the [Security] section of the [DeviceManager] - [Information] page to 'on’.
1
Click [Job Manager] ➞ [Print Job] from the menu that appears under [Job Manager].
A list of [Print Jobs] being processed or waiting to be printed by the machine appears.
2-3
2
Remote UI Functions
You can use the Remote UI to manage print jobs that are being processed by the machine, or waiting
to be printed.
2
To delete a print job, select the [
] checkbox to the left of the job to delete ➞ click
Remote UI Functions
2
The selected job is deleted.
NOTE
You cannot recover the job once it is deleted.
2-4
.
Viewing the Activity Log
The Remote UI enables you to view the [Activity Log] of fax jobs. The [Activity Log] shows the recent
facsimile transactions of up to 25 jobs.
Click [Job Manager] ➞ [Activity Log] from the menu that appears under [Job Manager].
2
Remote UI Functions
1
The [Activity Log] appears displaying information about fax jobs that have already been processed by the
machine.
2-5
Viewing and Editing Device Settings
The Remote UI can be used to view and edit some of the settings for the machine.
NOTE
You can edit the [Device Settings] only when you are using the [Administrator Mode].
1
Click [Device Settings] ➞ select the item to display from the menu that appears under [Device Settings].
(Example) When [Common Settings] is selected:
Remote UI Functions
2
You can select from the following:
- Common Settings
- Printer Settings
- Copy Settings
- Fax Settings
The current settings are displayed for the selected item.
2
To edit the settings, click [Change...].
NOTE
You can edit the [Device Settings] only when you are using the [Administrator Mode].
2-6
3
Set each of the items as necessary ➞ click [OK].
For example, if you want to change the paper size for the paper cassette, select the desired paper size from
[Paper Size] for <Cassette> in <Paper Selection> ➞ click [OK].
If you want to cancel the changes to the settings, click [Cancel].
Remote UI Functions
2
NOTE
If the changes in settings made from the Remote UI were not reflected in the machine, press any key on the
operation panel of the machine or wait until the auto clear function is activated. The new settings should then
become effective.
Viewing and Editing the Address Book
The Remote UI allows you to make additions and changes to each item of the [Address Book]. The
[Address Book] menu includes the following pages:
• One-touch Speed Dial
• Coded Dial
• Import/Export
Viewing and Editing One-Touch or Coded Speed Dialing
You can use the Remote UI to view and edit the one-touch or coded speed dialing numbers. You can
delete and register addresses, or make changes to the addresses already registered.
NOTE
You can edit the [Address Book] only when you are using the [Administrator Mode].
2-7
1
Click [Address Book] ➞ select [One-touch Speed Dial] or [Coded Dial] that appears under [Address
Book].
Remote UI Functions
2
A list of one-touch or coded speed dialing numbers appears.
NOTE
• You can jump to the number you want to delete or edit by selecting the appropriate range of the numbers in the
drop-down box on the upper right corner of the screen.
• You can edit or add group dialing registered under a one-touch or coded speed dialing number. <Group> is
displayed under [Type] for group dialing.
2-8
To delete a one-touch or coded speed dialing number, select the [
number to delete ➞ click
.
] checkbox to the right of the
2
Remote UI Functions
2
The selected number is deleted.
NOTE
You cannot recover the number once it is deleted.
2-9
3
To view the information registered for one-touch or coded speed dialing numbers, click the number or the
name.
If you want to add an address for [One-touch Speed Dial] or [Coded Dial], click any number for which [None] is
displayed as the name.
Remote UI Functions
2
The detailed information about the number appears.
2-10
4
To edit the information, click [Edit...].
Remote UI Functions
2
5
To store the values you entered, click [OK].
To cancel editing, click [Cancel]. The display returns to the previous page.
When you click [OK], the values will be stored and the display will return to the [One-touch Speed Dial] or [Coded
Dial] screen.
2-11
● To specify group dialing:
❑ Select [Group] from [Type] ➞ enter a group name in [Group Name] ➞ click [Address Book...].
Remote UI Functions
2
❑ Register all the destinations for the group. Select [One-touch Speed Dial] or [Coded Dial] from the drop-down
list to the left of [OK] ➞ select the [
click [OK].
2-12
] checkbox to the right of the number to register for the group dialing ➞
❑ Make sure that the registered destinations are displayed in the [Members List] ➞ click [OK].
Remote UI Functions
2
To cancel editing, click [Cancel]. The display returns to the previous page.
When you click [OK], the values will be stored and the display will return to the [One-touch Speed Dial] or [Coded
Dial] screen.
Importing/Exporting the Address Book
The Remote UI allows you to [Import/Export] the address book data.
NOTE
• The exported file contains the extension ".abk" and can be imported to other Canon products that support address
book importing.
• You can only import an address book file with an “.abk” extension.
2-13
1
Click [Address Book] ➞ select [Import/Export].
The [Import/Export] screen appears.
Remote UI Functions
2
NOTE
• You can import/export address book data only when you are using the [Administrator Mode].
• Any one-touch speed dialing key or coded speed dialing code that already contains address book data will be
overwritten with the new data assigned to the same key or code.
2-14
■ Importing the Address Book Data
By clicking [Import...] in the [Import/Export] screen, you can import the address book data from a file.
1
Click [Import...].
Remote UI Functions
2
2
Click [Browse...] to select an address book data file to be imported to the machine ➞ click [Open].
2-15
3
Click [OK] to import the file to the [Address Book].
If you want to cancel importing data, click [Cancel] to return to the [Import/Export] screen.
Remote UI Functions
2
[Importing address information] will be displayed during the transfer.
2-16
■ Exporting the Address Book Data
By pressing [Export...] in the [Import/Export] screen, you can export the address book data from the
machine and save it as a file.
Click [Export...].
2
Remote UI Functions
1
2-17
2
To download the file, click [Save].
If you want to cancel download, click [Cancel].
Remote UI Functions
2
3
2-18
Enter the name of the file.
Click [Save] to store the address book data.
The machine exports the address book data.
2
Remote UI Functions
4
2-19
Viewing Additional Information
You can use the Remote UI to access additional information and help for your machine.
NOTE
You may need a connection to the internet to access some of this additional information.
1
Click [Support Links].
A list of the various additional information resources appears.
Remote UI Functions
2
2
Click on the item you want to access.
NOTE
• You can specify up to two link destinations by clicking [Edit...]:
•
•
2-20
- Link 1
- Link 2
[Link 1] and [Link 2] enable you to set the link destinations such as Help Desk and Manual.
If a link contains no name, it is not displayed on the list even if a destination URL is assigned to the link.
Appendix
3
CHAPTER
This section contains the glossary and index.
Glossary
CHAPTER
Cookies
A file left on a user’s computer when the user visits a web site. A cookie allows the web site to recognize the
user on subsequent visits. Cookies are generally used to enable a user to automatically sign on to certain
web sites and to customize the features offered by such sites.
Protocol
A set of rules that govern the transmission of data across a network. Examples of protocols are FTP, DHCP,
BOOTP, RARP, IPP, and TCP/IP.
− FTP: File Transfer Protocol. A client-server protocol allowing a user to transfer files on one computer to and
from another computer over a TCP/IP network. The File Transfer Protocol also governs the client program
with which the user transfers files.
− DHCP: Dynamic Host Configuration Protocol. A protocol which automatically specifies the network settings
of a client on a TCP/IP network. Many of the settings required to set up TCP/IP, which is the standard
protocol of the Internet, can be made automatically.
− BOOTP: BOOT strap Protocol. A protocol that enables a client machine to automatically obtain network
setup information from a server over a TCP/IP network. BOOTP enables a client to automatically locate
such information as the host name, domain name, and IP address, so that it is not necessary to create
these items manually.
− RARP: Reserve Address Resolution Protocol. A protocol which associates a network adapter address
(MAC address) with an Internet Protocol (IP) address.
− IPP: Internet Printing Protocol. A protocol used between a client and a print server for carrying out remote
printing over the Internet.
− TCP/IP (Transmission Control Protocol/Internet Protocol): The protocol used to connect to the Internet and
to wide area networks.
Proxy server
A server that provides a cache of files available on remote servers that are slow or expensive to access. The
term, “proxy server,” normally refers to a World Wide Web server that, on receiving a URL, tries to supply the
requested file from its cache. If it cannot locate the file there, the proxy server would bring it from the remote
server and also saves a copy in its cache so that the next request can be obtained locally.
Remote UI
Remote User Interface (UI) allows you to remotely perform machine functions from a computer connected to
the network using web browser software. Many functions that are done physically at the Canon machine’s
operation panel can be done via software at a networked computer using a web browser, such as Microsoft
Internet Explorer.
Spool
Simultaneous Peripheral Operations On-Line. Spooling means putting jobs in a buffer, which is a special area
in memory or on a disk. Because devices access data at different rates, the buffer provides a waiting station
where the data can wait until the device for which it is meant is ready to access it.
URL
Uniform Resource Locator. A standard way of specifying the location of an object, usually a web page, on the
Internet. The URL for a web page would look something like this: “http://www.w3.org/default.html.” Here,
“http:” indicates that a web page is being accessed, “www.w3.org” is the address of the server containing the
web page, and “default.html” is the file name under which the web page is stored on the server.
3-1
Index
3
A
L
Address Book, 2-7
Coded Speed Dialing, 2-7
Exporting the Address Book Data, 2-17
Importing the Address Book Data, 2-15
One-Touch Speed Dialing, 2-7
Address Book button, 1-2
Administrator Mode, 1-3, 1-5, 2-1, 2-2, 2-6
Link 1, 2-20
Link 2, 2-20
Logon Mode, 1-5
B
M
Managing Jobs, 2-3
Print Job, 2-3
Managing Print Jobs, 2-3
Manual, 2-20
Appendix
Back button, 1-3
C
Change, 2-6
Cookies, 1-4, 3-1
Counter, 2-2
D
Device, 2-1, 2-6
Device Manager button, 1-2
Device Settings, 2-6
Device Settings button, 1-2
Device Status, 2-1
Device Status Check, 1-2
E
Editing Device Settings, 2-6
End-User Mode, 1-5, 2-3
F
Features, 2-2
N
Network, 1-1, 2-2
Network Settings, 1-4
O
Online help, 1-3
OS, 1-3
Overview, 1-1
Owner Privileges, 2-3
P
Permit End-user Job Operation, 2-3
Print Job, 2-3
Protocol, 3-1
Proxy server, 1-4, 3-1
R
Refresh, 1-3
Remote UI, 1-2, 3-1
Remote UI (User Interface) software, 1-1
Remote UI screen, 1-2, 1-4
H
Help button, 1-3
Help Desk, 2-20
I
Information, 2-1
Information Display, 2-1
IP (Internet Protocol) address, 1-1
IP address, 1-2, 1-4
S
Spool, 3-1
Starting the Remote UI, 1-4
Status, 2-1
Support Link button, 1-3
Support Links, 2-20
System Requirements, 1-3
T
J
Job Manager button, 1-2
3-2
To Top Page button, 1-2
Top Page, 1-2
U
Update button, 1-3
URL, 1-4, 3-1
V
Viewing Additional Information, 2-20
Viewing Device Settings, 2-6
Viewing the Job Log, 2-3
Activity Log, 2-5
W
3
Appendix
Web Browser, 1-1, 1-2, 1-3, 1-4
Web Server, 1-3
Web Server Software, 1-1
Windows, 1-3
3-3
CANON INC.
30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
CANON U.S.A., INC.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
CANON CANADA INC.
6390 Dixie Road Mississauga, Ontario L5T 1P7, Canada
CANON EUROPA N.V.
Bovenkerkerweg 59-61 P.O. Box 2262, 1180 EG Amstelveen, The Netherlands
CANON FRANCE S.A.
17,quai du President Paul Doumer 92414 Courbevoie Cedex, France
CANON (U.K.) LTD.
Woodhatch, Reigate, Surrey, RH2 8BF, United Kingdom
CANON DEUTSCHLAND GmbH
Europark Fichtenhain A10, 47807 Krefeld, Germany
CANON ITALIA S.p.A.
Via Milano, 8-20097 San Donato Milanese (MI) Italy
CANON LATIN AMERICA, INC.
703 Waterford Way, Suite 400, Miami, Florida 33126, U.S.A.
CANON AUSTRALIA PTY. LTD
1 Thomas Holt Drive, North Ryde, Sydney, N.S.W. 2113, Australia
CANON CHINA CO., LTD
15F, North Tower, Beijing Kerry Centre, 1 Guang Hua Road, Chao Yang District,
100020, Beijing, China
CANON SINGAPORE PTE. LTD.
1 HarbourFront Avenue #04-01 Keppel Bay Tower, Singapore 098632
CANON HONGKONG CO., LTD
19/F., The Metropolis Tower, 10 Metropolis Drive, Hunghom, Kowloon, Hong Kong
FA7-7227 (010)
© CANON INC. 2005
230V
Download PDF