Cube Relay Page 1 of 3

Cube Relay Page 1 of 3
Airotronics - Delay On Make - TGC CUBE
Page 1 of 3
Cube Relay
TGC Timers
TGC series Cube Relay Delay on
Make timers are a unique
combination of digital CMOS timing
circuitry with a relay output in a
compact 2" x 2" configuration. For
users of solid-state timers, these
units provide the same functional
performance as plug-in relay timers,
but at significant cost savings.
Timing Mode
Application of input voltage to the timer starts the
time delay. At the end of the delay period, the
load is energized. To reset, remove the input
voltage to the timer.
FEATURES
?
?
?
?
?
?
High current carrying capacity up to 20
amps
Transient protected
100% Load isolation
No leakage in N.O. position
No heat sinking required
Available in any time delay period required
?
?
?
?
Digital CMOS timing
No minimum load required
Totally encapsulated for
protection from harsh
environments
100% Operational testing
before shipping
?
BASIC WIRING AND DIMENSIONS
http://www.airotronics.com/delayonmake/tgc_cube.htm
1/18/2007
Airotronics - Delay On Make - TGC CUBE
Page 2 of 3
SPECIFICATIONS
Input Voltage:
?
?
VDC: 12, 24 or 48
VAC: 24, 48, 120 or 230, 50/60 Hz
Relay Life Expectancy:
Time Delay:
?
?
Mechanical: 20 million operations
Electrical: 100,000 operations
Contact Material: Silver nickel, gold
plated, or silver cadmium oxide
Timing Mode: Delay On Make
?
? Type: Digital CMOS
? Time Range: 0.2 seconds to 24 hours
? Time Adjustments: Factory -fixed time
period; variable, with adjustments on Protection:
timer, or terminals for external resistor
or potentiometer
? Polarity Protection: All DC units have
reverse polarity protection
? Transient Protection: 18 joules
Repeatability: ±0.5%
? Dielectric Strength: 1800V RMS 60 Hz
Setting Accuracy:
?
Temperature Ranges:
?
?
Fixed time period: 10% of nominal
time.
Variable time range: +15% -5% max.
time, -10% min. time
Reset/Recycle Time: 25 milliseconds
Initiate Time: 6 milliseconds or less
?
?
Physical Data:
?
?
Relay Output:
?
?
Storage: -25° C to +85° C
Operating: -40° C to +85° C
Mounting: Surface with one #8 screw
Connection & Termination: 0.25" quick
connects
Form:
Standard – SPST N.O.
Optional – SPST N.C., SPDT
SELECTION PROCEDURE
Mode of
Input
Series
Operation
Voltage
1.
2.
3.
Time Ranges
VARIABLE TIME PERIODS
120 VAC
230 VAC 0001 0.5 to 1 sec.
24 VAC
http://www.airotronics.com/delayonmake/tgc_cube.htm
Time
Adjustment
A.
Variable,
integral,
knob on
Relay
Output
Form
1.
2.
Options
SPDT H Heavy
SPDT duty, 10
(N.O.) amps (6
1/18/2007
Airotronics - Delay On Make - TGC CUBE
4.
Delay
On
Make
5.
6.
7.
8.
TGC
9.
24-28
VDC
48 VAC
48 VDC
12 VDC
Any in
between
AC
voltage
(specify)
Any in
between
DC
voltage
(specify>
Page 3 of 3
0010 .1 to 10 sec.
0100 1 to 100 sec.
1000 10 to 1000 sec.
Any range up to 24 hours avaialble.
B.
FIXED TIME PERIODS
C.
Specify time in full seconds or
hours folowed by the letter "S" or
"H" and the decimal amount of the
main time unit.
Examples: 5S5 is 5.5 secs
5H5 is 5.5 hours
D.
timer.
Variable,
external
knob
remote.
Fixed,
internal,
factory
set
Fixed,
external,
resistor
remote.
3.
SPST amps relay
(N.C.) standard)
J 20 amps
Airotronics
2747 Route 20 East
Cazenovia, New York 13035
Tel: 315-655-8476 Fax: 315-655-3862
http://www.airotronics.com/delayonmake/tgc_cube.htm
1/18/2007
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement