Canon MVX35i Camcorder User Manual

manual dvd-40 EN.qxd
07/10/2004
12:17
PÆgina 1
HOME CINEMA
DVD 40
DVD Player
User Manual
manual dvd-40 EN.qxd
07/10/2004
12:17
PÆgina 2
manual dvd-40 EN.qxd
07/10/2004
12:17
PÆgina 3
Content
Introduction
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . .04
Important Safety Instructions . . . . . . . . . . . . . . . . .05
Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .07
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .08
Front Panel and Rear Panel Illustration . . . . . . . . .09
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . .10
Connections
Connecting to a TV set . . . . . . . . . . . . . . . . . . . .11
Connecting to an AV Receiver with
5.1 Channel Analog Audio Input . . . . . . . . . . . . .12
Connecting to an AV Receiver with
Digital Audio Input . . . . . . . . . . . . . . . . . . . . . . .13
Basic Playback
Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . .14
Advanced Features
Modes and Features Setup . . . . . . . . . . . . . . . . . .15
Remote Control Operation . . . . . . . . . . . . . . . . .22
MP3/Divx-MPEG4 Playback . . . . . . . . . . . . . . . . .31
KODAK Picture CD Playback . . . . . . . . . . . . . . . .32
Others
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . .33
Remote Control Preparation . . . . . . . . . . . . . . . . .34
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Macrovision Function Instruction . . . . . . . . . . . . .35
3
manual dvd-40 EN.qxd
07/10/2004
12:17
PÆgina 4
Introduction
Safety Precautions
WARNING:
TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THE
UNIT TO RAIN OR MOISTURE.
NEVER ATTEMPT TO OPEN THE CABINET, DANGEROUS HIGH
VOLTAGES ARE PRESENTED IN THE UNIT. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
CAUTION:
THE APPARATUS SHALL NOT BE EXPOSED TO WATER AND NO
OBJECTS FILLED UIT LIQUID SUCH AS VASES SHALL BE PLACED
ON THE APPARATUS.
THE LIGHTNING FLASH WITH ARROWHEAD
SYMBOL WITHIN AN EQUILATERAL TRIANGLE IS
INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE"
WITHIN THE UNIT'S CABINET THAT MAY BE OF
SUFFICIENT MAGNITUDE TO CONSTITUTE A
RISK OF ELECTRIC SHOCK TO PERSONS.
CAUTION:
THE UNIT EMPLOYS A LASER SYSTEM. TO ENSURE THE PROPER
USE OF THE UNIT, READ THIS MANUAL CAREFULLY AND KEEP
IT FOR FUTURE REFERENCE.
THE EXCLAMATION POINT WITHIN AN EQUI
LATERAL TRIANGLE IS INTENDED TO ALERT THE
USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE MANUAL ACCOMPANYING
THE UNIT.
IF THE UNIT REQUIRES SERVICING, CONTACT THE SELLER OR
SEE "TROUBLESHOOTING".
TO PREVENT DIRECT EXPOSURE TO THE LASER RADIATION, DO
NOT OPEN THE CABINET. VISIBLE LASER MAY RADIATE WHEN
THE CABINET IS OPENED OR THE INTERLOCKS ARE DEFEATED.
DO NOT STARE INTO THE LASER BEAMS.
CAUTION:
THE DVD VIDEO PLAYER IS A CLASS 1 LASER PRODUCT. USE OF
CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT
IN HAZARDOUS RADIATION EXPOSURE.
AS THE LASER BEAM USED IN THIS DVD VIDEO PLAYER IS
HARMFUL TO THE EYES, DO NOT ATTEMPT TO DISASSEMBLE
THE CABINET.
REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
WARNING:
CE REGULATIONS STATE THAT ANY CHANGE OR MODIFICATION TO THE EQUIPMENT, NOT EXPRESSLY APPROVED BY
MAKER OR ITS AUTHORIZED PARTIES, COULD VOID USER'S
AUTHORITY TO OPERATE THIS EQUIPMENT.
VERY IMPORTANT
THE SOFTWARE OF THIS DVD PLAYER IS NOT UPDATABLE.
ANY CHANGES MADE TO THE SOFTWARE OF THIS DVD PLAYER WILL MAKE THE WARRANTY VOID,
AND COULD SERIOUSLY DAMMAGE ITS FUNCTIONING.
4
manual dvd-40 EN.qxd
07/10/2004
12:17
PÆgina 5
Introduction
Important Safety Instructions
1. Read Instructions
All the safety and operating instructions should be read before the
product is operated.
12. Grounding or Polarization
This product may be equipped with a polarized alternating current
line plug (a plug having one blade wider than the other). This plug
will fit into the power outlet only one way. This is a safety feature.
If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.
2. Retain Instructions
The safety and operating instructions should be retained for future reference.
3. Head Warnings
All warnings on the product and in the operating instructions
should be adhered to.
13. Power Cord Protection
Power supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them,
paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.
4. Follow Instructions
All operating instructions should be followed.
5. Cleaning
Unplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth
for cleaning.
14. Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the product,
be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static
charges. Article 810 of the National Electrical Code, ANSI/NFPA
70, provides information with regard to proper grounding of the
mast and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conductors, location of
antennadischarge unit, connection to grounding electrodes, and
requirements for the grounding electrode. See figure below.
6. Attachments
Do not use attachments not recommended by the product manufacturer as they may cause hazards.
7. Water and Moisture
Do not use this product near water for example, near a bathtub,
wash bowl, kitchen sink, or laundry tub; in a wet basement; or
near a swimming pool; and the like.
15. Lightning
For added protection for this product during a lightning storm, or
when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the product due to lightning
and power lines surges.
8. Accessories
Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a
child or adult, and serious damage to the product. Use only with
a cart, stand, tripod, bracket, or table recommended by the
manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer's instructions, and should use
a mounting accessory recommended by the manufacturer.
16. Power Lines
An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or
where it can fall into such power lines or circuits. When installing
an outside antenna system, extreme care should be taken to keep
from touching such power lines or circuits as contact with them
might be fatal.
9. Portable Cart Warning
A product and cart combination should be moved with care.
Quick stop, excessive force, and uneven surface may cause the
product and cart combination to overturn.
17. Overloading
Do not overload wall outlets, extension cords, or integral convenience receptacles, as this can result in a risk of fire or electric
shock.
10. Ventilation
Slots and openings in the cabinet are provided for ventilation and
to ensure reliable operation of the product and to protect it from
overheating, and these openings must not be blocked or covered.
The openings should never be blocked by placing the product on
a bed, sofa, rug, or other similar surface. This product should not
be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer's instructions have been adhered to.
18. Object and Liquid Entry
Never push objects of any kind into this product through openings
as they may touch dangerous voltage points or short-out parts
that could result in a fire or electric shock. Never spill liquid of any
kind on the product.
19. Servicing
Do not attempt to service this product yourself as opening or
removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
11. Power Sources
This product should be operated only from the type of power
source indicated on the marking label. If you are not sure of the
type of power supply to your home, consult your product dealer
or local power company. For products intended to operate from
battery power or other sources, refer to the operating instructions.
20. Damage Requiring Service
Unplug this product from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
5
manual dvd-40 EN.qxd
07/10/2004
12:17
PÆgina 6
Introduction
Important Safety Instructions
A) When the power-supply cord or plug is damaged,
B) If liquid has been spilled, or objects have fallen into the
product,
C) If the product has been exposed to rain or water,
D) If the product does not operate normally by following the ope
rating instructions. Adjust only those controls that are covered
by the operating instructions as an improper adjustment of
other controls may result in damage and will often require
extensive work by a qualified technician to restore the product
to its normal operation,
E) If the product has been dropped or damaged in any way,
F) When the product exhibits a distinct change in performance
this indicates a need for service.
21. Replacement Parts
When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or
have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other hazards.
22. Safety Check
Upon completion of any service or repairs to this product, ask the
service technician to perform safety checks to determine that the
product is in proper operating condition.
23. Wall or Ceiling Mounting
The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
24. Heat
The product should be situated away from heat sources such as
radiators, heat registers, stoves, or other products (including
amplifiers) that produce heat.
6
manual dvd-40 EN.qxd
07/10/2004
12:17
PÆgina 7
Introduction
Caution
Please use the original box and packing materials for safe
transportation of this product.
It is normal for the cover and rear panel to become warm
after the player has been operating for an extended period
of time.
Do not move this product during playback. Doing so may
cause damage to the pickup and the disc.
Press OPEN/CLOSE on the front panel or remote to open
or close the disc tray. Do not push or touch the tray while it
is opening or closing.
7
manual dvd-40 EN.qxd
07/10/2004
12:17
PÆgina 8
Introduction
Features
Full compatibility with DVD, CD, MP3, Kodak Picture
CD, CD-R and CD-RW (finalized)
Disc formats supported by this player:
Screensaver
Dolby digital
Dynamic spectrum display
Coaxial digital audio output
KODAK Picture CD
S-video, composite video and component (Y, Pb, Pr)
video outputs
MP3 files on CD-R/CD-RW
DVD video
MPEG-4
Parental Lock
Multi-angle
Closed Caption
Subtitle choices
Audio choices
TV Aspect Ratio modes
This product incorporates copyright protection technology
that is protected by method claims of certain U.S. patents
and other intellectual property rights owned by Macrovision
Corporation and other rights owners.
The product complies with the KODAK Picture CD format and will
display KODAK Picture CDs. The "KODAK Picture CD Compatible"
logo is a trademark of Eastman Kodak Company and is used with
permission.
Manufactured under license from Dolby Laboratories."Dolby" and
the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. c 1992-1997 Dolby Laboratories,
Inc. All rights reserved.
Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
8
manual dvd-40 EN.qxd
07/10/2004
12:17
PÆgina 9
Introduction
Front Panel and Rear Panel Illustration
Front Panel
1
2
3
4
5
6
7
8
9
10
POWER
DISC TRAY
OPEN/CLOSE
SCREEN
SENSOR
PLAY
PAUSE
STOP
PREV
NEXT
Rear Panel
11
12
13
14
15
16
17
18
19
20
5.1 CH CEN output RCA
5.1 CH SUR output RCA
5.1 CH FRONT output RCA
RCA de salida de vídeo
Component output RCA for Progressive Scan
Scart output RCA
Video output RCA
S-Video output RCA
Digital signal coaxial output RCA
Digital signal optical output RCA
9
manual dvd-40 EN.qxd
07/10/2004
12:17
PÆgina 10
Introduction
Remote Control
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
Standby
Program
Display
Open/Close
N/P
Subtitle
Angle
Language
Setup
Left
Vol Zoom
Tittle
Prev
Next
Stop
Pause
Mute
Step
Return
Mode
0-9 Number key
10+ key
Time
Repeat
Right
Resume
L/R
Menu
A-B
Rev
Fwd
Play
Up
Down
Enter
Vol+
Slow
2
3
4
5
22
6
8
7
23
24
34
9
25
36
10
26
38
11
37
28
19
13
38
15
14
20
12
18
27
30
29
31
32
17
16
33
21
Notes:
1. Please note that reference numbers for the remote are
described beginning on page 18 of this manual.
2. In this manual,
will be used to represent
different NAVIGATION ARROWS on the remote respectively.
10
manual dvd-40 EN.qxd
07/10/2004
12:17
PÆgina 11
Connections
Connecting to a TV Set
BLACK
Composite video
WHITE
RED
YELLOW
Component video
(for progressive scan)
VIDEO IN
VIDEO
SCART IN
S-VIDEO
VIDEO IN
SCART
PR
PB
Y
AUDIO IN
R
L
VIETA TFT-270
Notes:
There are three ways of connecting the player's AV output
to the TV set:
1. S-video cable and left/right audio cable [set the (Video
Type) to (S-Video)].
2. Composite video cable and left/right audio cable.
3. Component video cable and left/right audio cable [set
the (Video Type) to (Y, Pb, Pr)].
11
manual dvd-40 EN.qxd
07/10/2004
12:17
PÆgina 12
Connections
Connecting to an AV Receiver with 5.1 Channel Analog Audio Input
YELLOW
VIDEO IN
Vídeo
WHITE
WHITE
WHITE
RED
FRONT R
SUR R
SW
FRONT L
RED
SUR L
RED
CENTER
AUDIO IN
AMPLIFIER
Notes:
1. Set the TV to the AV input connected to the DVD player.
2. Set the Amplifier to the AV input connected to the DVD
player.
12
VIETA VR-6100
manual dvd-40 EN.qxd
07/10/2004
12:17
PÆgina 13
Connections
Connecting to an AV Amplifier with Digital Audio Input Connections
Optical cable
Coaxial cable
COAXIAL
OPTICAL
AMPLIFIER
VIETA VR-6100
Notes:
1. Select the Coaxial digital audio output.
2. Set the player's audio out to Raw or PCM mode.
3. Set the Amplifier to the AV input connected to the DVD
player.
13
manual dvd-40 EN.qxd
07/10/2004
12:17
PÆgina 14
Basic Playback
Basic Operation
Preparation before playing:
1. Connect the DVD player to your TV and amplifier.
2. Turn on the TV.
3. Turn down the volume on your amplifier, and then power
it on.
4. Set the TV to the AV input connected to the DVD player.
5. Set the amplifier to the AV input connected to the DVD
player.
STEP 1 - Press POWER to start the
player. The DVD logo appears on the
TV screen.
STEP 2 - Press OPEN/CLOSE either on
the front panel or remote control.
When the tray is opened, place the
disc on the tray with the label side
up. Press OPEN/ CLOSE again to
close the disc tray.
STEP 3 - Press the PLAY button on the
front panel or remote control.
The player will automatically read
and identify the disc, and begin
playback.
14
manual dvd-40 EN.qxd
07/10/2004
12:17
PÆgina 15
Advanced Features
Modes and Features Setup
SETUP
In stop mode, press SETUP, and the TV screen will
display the Setup Menu as follows:
Press
to change items
A. Press ENTER to display each submenu
B. Press SETUP to exit the Setup Menu
Setup Menu
Language Setup
Select [Language] in the Setup Menu, and press ENTER to
display [Language] submenu:
Press
to select the menu item
A. Press ENTER to confirm
Select [OSD Menu] and press ENTER or
submenu [OSD Menu]:
B. Press
to go back one menu
C. Press
or
repeatedly to return to the Setup Menu
to display
Press
to change your selection
A. Press ENTER to confirm
B. Press SETUP to exit the Setup Menu
15
manual dvd-40 EN.qxd
07/10/2004
12:17
PÆgina 16
Advanced Features
Modes and Features Setup
Language Setup
Select [Subtitle], and press ENTER or
[Subtitle] submenu:
to display the
Press
to change your selection
Note: Subtitle languages vary by disc
A. Press ENTER to confirm
B. Press SETUP to exit the Setup Menu
Select [Audio],and press ENTER or
[Audio] submenu:
to display the
Press
to change your selection
Note: Audio languages vary by disc
A. Press ENTER to confirm
B. Press SETUP to exit the Setup Menu
Select [DVD Menu], and press ENTER or
[DVD Menu] submenu:
to display the
Press
to change your selection
Note: Menu languages vary by disc
A. Press ENTER to confirm
B. Press SETUP to exit the Setup Menu
16
manual dvd-40 EN.qxd
07/10/2004
12:17
PÆgina 17
Advanced Features
Modes and Features Setup
Video Setup
Select [Video] in the Setup Menu, and press ENTER to
display submenu [Video]:
Press
to select the menu item
A. Press ENTER or
to confirm
B. Press
to return to the Setup Menu
Select [TV shape], and press ENTER or
[TV shape] submenu:
to display the
Press
to change your selection
A. Press ENTER to confirm
B. Press SETUP to exit the Setup Menu
[4:3 PS] - Pan and scan refers to pictures where part of pictures is
cut off so it fills the whole screen.
[4:3LB] - Letter Box refers to pictures where black bands appear
at the top and bottom.
[16:9] - The picture fills the screen of a wide-screen (16:9) television.
Note:
Not all DVDs offer movies in Full Screen format. If not, the disc
will override your TV Display setting and the movie will be displayed in Letterbox format.
Select [TV system] and press ENTER or
menu [TV system]:
to display sub-
Press
to change your selection
A. Press ENTER to confirm
B. Press SETUP to exit the Setup Menu
[NTSC] - Select if you are using NTSC signal system to match your
TV set.
[PAL] - Select if you are using PAL signal system to match your TV
set.
[AUTO] - Select if you are using AUTO signal system to match
your TV set.
17
manual dvd-40 EN.qxd
07/10/2004
12:17
PÆgina 18
Advanced Features
Modes and Features Setup
Select [Video Output], and press ENTER or
the [Video Out] submenu:
to display
A. Press ENTER to confirm
B. Press SETUP to exit the Setup Menu
[S-Video] - Select if you connected the DVD player to your TV
using the composite Video output.
[YUV] - Select if you connected the DVD player to your TV using
the YUV output.
[Y Pb Pr] - Select if you connected the DVD player to your TV using
progressive scan.
Note:
The Composite video and S-video output is always available.
Press
to change your selection
Audio Setup
The Audio menu allows you to set the analog audio outputs to correspond with the external components you have
connected to the player. For example, if you connected the
player to a TV using the Stereo Audio jacks, you should set
front speaker to PRESENT and other speaker to NONE to
enjoy down mixed stereo audio.
ON
OFF
A. Press ENTER to confirm
B. Press SETUP to exit the Setup Menu
Bass Management:
you can select Bass redirection or not.
present
large
small
present
large
small
none
present
none
A. Press ENTER to confirm
B. Press SETUP to exit the Setup Menu
You can change the status of these speakers by select
these items.
18
present
large
small
none
manual dvd-40 EN.qxd
07/10/2004
12:17
PÆgina 19
Advanced Features
Modes and Features Setup
More Audio Setup
The More Audio menu includes Pro Logic and Subwoofer
settings.
Pro Logic Setting
The DVD player has a built-in Dolby Pro Logic decoder to provide virtual surround sound for PCM (stereo) source material from
the 5.1 channel analog audio outputs.
A.
B.
C.
D.
From Stop mode, press SETUP.
Select More Audio and press ENTER.
Select Pro Logic and press ENTER.
Select the desired Pro Logic setting and press ENTER:
Auto Stereo audio soundtracks will be output in Dolby Pro
Logic mode.
On All audio soundtracks will be output in Dolby Pro Logic
mode.
Off (default) Dolby Pro Logic decoding will always be inactive.
E. Press SETUP to save and exit.
RAW
PCM
Off
Auto
On
Off
19
manual dvd-40 EN.qxd
07/10/2004
12:17
PÆgina 20
Advanced Features
Modes and Features Setup
Rating Setup
The Rating menu allows you to block playback of DVDs
based on their ratings.
1:Kid Safe
2:G
3:PG
4:PG-13
5:PG-R
6:R
7:NC-17
8:Adult
Setting the Password & Rating Level
The DVD player allows you to block playback of inappropriate content with a passwordprotected Rating system (not
all discs are rated).
A. From Stop mode, press SETUP.
B. Select Rating and press ENTER.
C. Select Rating and press ENTER repeatedly to set the
rating from 1 (most restrictive) to 8( least restrictive).
If a password has already been set, the lock icon will be
closed. You will not be able to select Rating until you
SELECT the correct password using the 0-9 keys.
D. Select Password.
E. Use the 0-9 keys to SELECT a 4-digit password and
press ENTER. The lock icon will close to indicate that
the rating and password are set.
F. Press SETUP to save and exit.
20
manual dvd-40 EN.qxd
07/10/2004
12:17
PÆgina 21
Advanced Features
Modes and Features Setup
Setting DivX-MPEG4 registration
Not all DVDs are rated.
DVDs that are rated higher than the level you select will not
play without SELECTING the correct password.
If you forget your Rating password, select 8888 to clear the
memory. Keep this password out of reach of children as if
will always unlock the Parental Control setting.
21
manual dvd-40 EN.qxd
07/10/2004
12:17
PÆgina 22
Advanced Features
Remote Control Operation
STANDBY
During playback, press STANDBY to stop the player
and return to standby mode.
While the player is in standby, press STANDBY or any
key on the front panel to resume normal operation.
OPEN/CLOSE
To open the disc tray, press OPEN/CLOSE.
To close the disc tray, press OPEN/CLOSE again.
0-10+ keys
These keys are used to input the time, as well as title,
chapter and track numbers.
When a numeric item is displayed on the screen, press
the 0-10+ keys to select the desired entry, and press
ENTER to confirm.
A-B
During playback, press A-B to select point A.
Press it again to select point B. The player will repeat the
section from A to B automatically.
Press A-B third time to cancel A-B repeat and clear
points A and B.
Notes:
1. During CD playback, points A and B must be within the same
track.
During DVD playback, points A and B can be selected from
different chapters.
2. This function is subject to the disc.
22
manual dvd-40 EN.qxd
07/10/2004
12:17
PÆgina 23
Advanced Features
Remote Control Operation
DISPLAY
During playback, press DISPLAY to display the current
time counter position.
Elapsed time of the current
track/chapter
Press DISPLAY again to display additional information
about the playing disc.
Disc type
Elapsed time of the current track
Total tracks
Current track
Elapsed time of the current title
Current chapter
Angle
Disc type
Current title
Audio type
Subtitle
23
manual dvd-40 EN.qxd
07/10/2004
12:17
PÆgina 24
Advanced Features
Remote Control Operation
TIME
During playback, press TIME, and the [Track Search] menu
will display as follows:
Notes:
1. Time searches for an exact time in the movie.
2. In Title/Chapter mode, you cannot SELECT a value outside
the range of the total number of titles or chapters
3. For some DVD discs, the Search function is unavailable.
Use the number keys to input the desired Time, Title or
Chapter, then press ENTER to confirm.
24
manual dvd-40 EN.qxd
07/10/2004
12:17
PÆgina 25
Advanced Features
Remote Control Operatiion
During DVD or CD playback, press and hold to scan
forward.
The player will review the disc at 2, 4, 8 and 16 times
normal speed as follows:
>> X2 >> X4 >> X8 >> X16
Press PLAY to resume normal playback.
During DVD or CD playback, press and hold to scan in
reverse.
The player will review the disc at 2, 4, 8 and 16 times
normal speed as follows:
<< X2 << X4 << X8 << X16
Press PLAY to resume normal playback.
PREV
Press PREV to skip to previous chapter or track.
NEXT
Press NEXT to skip to the next chapter or track.
STOP
Press STOP to stop playback completely.
Press RESUME to resume playback from the point you
pressed STOP.
Note:
The screen saver will automatically turn on i f playback is stopped
about 5 minutes (when Screen Saver is set to on).
25
manual dvd-40 EN.qxd
07/10/2004
12:17
PÆgina 26
Advanced Features
Remote Control Operation
PLAY
Press PLAY from stop mode to start playback.
This function is not available if the elapsed time of
current track is less than 10 seconds.
Note:
MP3 discs and some DVD discs do not have a 10 second review
feature.
PAUSE
Press PAUSE during playback to pause playback.
Press PLAY to resume normal playback.
MENU
During DVD, playback , press MENU to return to the
program menu.
In the Setup Menu, press MENU to return to the main
menu or stop mode.
Any time, press MENU to cancel the current OSD or
some menus
Note:
This function is subject to the disc.
TITLE
During DVD playback, press TITLE to display the DVD
title menu or play the first title.
Note:
This function is subject to the disc.
26
manual dvd-40 EN.qxd
07/10/2004
12:17
PÆgina 27
Advanced Features
Remote Control Operation
PROG
While [PROGRAM] is on, press ENTER to display the [Program] submenu:
Input the track numbers in the order you would like them to play.
When finished, select [Play Program] and then press ENTER to
play the tracks in the new programmed order.
Select [Clear All] and press ENTER to clear all the numbers you
have input.
Input the title number and the chapter number in the desired
order. Then select [Play Program] and press ENTER to play the
chapters in the order you have set.
Select [Clear All] and press ENTER to clear all the numbers you
have input.
MODE
During playback is stopped.
Press MODE button twice to switch to progressive scan
mode.
Press MODE once to switch back to Interlace scan
mode.
Note:
If you connect the DVD player to your TV using the component
Video Output, you can use the MODE button to switch to progressive scan for superior video quality.
27
manual dvd-40 EN.qxd
07/10/2004
12:17
PÆgina 28
Advanced Features
Remote Control Operation
SLOW
Press SLOW repeatedly to slow motion playback at
variable speeds.
STEP
Press STEP during playback to pause playback.
Press STEP repeatedly to play frame.
Press PLAY to resume normal playback.
REPEAT
Select to press REPEAT to select Repeat Title, Repeat
chapter, Repeat off During DVD playback.
Press REPEAT to select Repeat Single, Repeat All and
Repeat off (CD or Others).
28
manual dvd-40 EN.qxd
07/10/2004
12:17
PÆgina 29
Advanced Features
Remote Control Operation
VOL+ VOL-
Volume <VOL+> button to increase Volume
Press <VOL-> button to reduce volume till to no volume output.
MUTE
Press MUTE to mute the Audio output
Press MUTE again to resume normal audio output
ZOOM
During DVD playback, press ZOOM to magnify the
image as follows:
>> Q1 >> Q2 >> Q3 >>
<< Q Off <<
29
manual dvd-40 EN.qxd
07/10/2004
12:17
PÆgina 30
Advanced Features
Remote Control Operation
ANGLE
During DVD playback
Press ANGLE to view scenes from different camera
angles.
Press ANGLE repeatedly to change from one camera
angle to another.
Note:
This function is disc specific.
LANGUAGE
During DVD playback
Press LANGUAGE repeatedly to select from up to 8
audio languages/formats.
Note:
This function is disc specific.
SUBTITLE
During DVD playback
Press SUBTITLE repeatedly to select from up to 32
subtitle languages.
Note:
This function is disc specific (languages will vary).
30
manual dvd-40 EN.qxd
07/10/2004
12:17
PÆgina 31
Advanced Features
MP3/Divx-MPEG4 Playback
Supported formats
Note:
The player will not identify or play MP3 discs under the
following conditions: recording format is not supported,
badly scratched or deformed disc, MP3 recorded in CD-R
or CD-RW which is not finalized, or a dirty pickup.
Divx-MPEG4 is a video encode using the internatioual
standard MPEG-4 and audio MP3 format.
Disc format: ISO 9660, Joliet
Music file format: MP3
MP3 bit rate (data rate): 32 - 192 kbps.
Total number of music files and albums: around 350 per
disc
Sampling rate: (CBR) 32kHz/44. 1kHz/48kHz/64kHz;
(VBR) 16kHz/22kHz/24kHz/32kHz (MPEG)
When a MP3 disc Divx -MPEG4 disc is loaded, the screen
will display as follows:
Total tracks
Elapsed time of the current track
Directory
Current track
File name
File window
Press
to select the file when the cursor
appears in the file window.
Press ENTER to play the current file selected
by the cursor.
Press
to switch between the directory
window and the file window.
Note:
During MP3 playback, Forward Scan and Reverse Scan are not available.
31
manual dvd-40 EN.qxd
07/10/2004
12:17
PÆgina 32
Avanced Features
Kodak Picture CD Playback
General function
The introduction of Kodak Picture CD
You can set slideshow transition modes for any pictures.
Press PAUSE to stop playing.
Press PLAY to continue slideshow transitions.
Press
or
to see the previous or next picture.
Press STOP to return to root menu.
A Kodak Picture CD has the size and shape of a regular
CD. You can order a KODAK Picture CD simply by checking the box on the photo finishing envelope when you
drop off a roll of film (35 mm or Advanced Photo System
(APS) color print film) at the time of processing in Kodak
Express store displaying "Kodak Picture CD" sign. When
your order is returned, you receive your prints, negatives,
and your full roll of pictures safely stored on your KODAK
Picture CD. Each KODAK Picture CD brings you the tools
to enhance, share and manage your pictures on your computer. You also can record the JPEG picture into CD-R or
CD-RW with the CD-Rewriter yourself.
Image Rotation
There are three modes to rotate a picture: original, 90 Deg,
and 180 Deg. These operations are allowed only when a
picture is being displayed normally and will be cancelled
automatically when a new picture is displayed. The ANGLE
keys are used to select the different rotation modes:
Note:
1. The Max. Size of JPEG Picture can be supported:
3840 x 3840 pels.
2. JPEG stands for Joint Picture Experts Group. It is the first
International Standard on Still Picture Compressing: ISO
10918-1, constituted by the Committee on Still Picture
Compressing Standard of ISO.
The pictures on KODAK Picture CD are stored in this for
mat (JPEG). This player can decode the JPEG pictures in
KODAK Picture CD and playback the pictures in different modes.
Press ANGLE. OSD display original.
Press ANGLE again. OSD display 90 Deg.
Press ANGLE again. OSD display 180 Deg.
Zoom Function
This player provides both Zoom in/out and Zoom pan function. Press the ZOOM consecutively, the picture will zoom
in/out in turn as followings:
Now, you can playback Kodak Picture CDs on this player
and view your wonderful pictures on your TV in the comfort
of your living room.
>> Q4/3 >> Q3/2 >> Q2 >>
<< Qoff << Q1/2 << Q1/4 <<
When a Kodak Picture CD is inserted on a player an automatic slide show is launched. Each picture in the Kodak Picture CD will be displayed consecutively in a slide-show fashion and will be scaled to fit in the whole TV screen.
Note:
During the ZOOM function, slideshow transitions and image
rotation are disabled.
Q off: close zoom, press PLAY again to resume slideshow transition mode.
32
manual dvd-40 EN.qxd
07/10/2004
12:17
PÆgina 33
Others
Troubleshooting
If you have any questions, please consult the troubleshooting guide below.
NO PICTURE OR SOUND
Ensure the power button is on.
Ensure the power outlet is operational.
Ensure the power cord is not damaged.
Ensure the power plug is connected firmly to the outlet.
PICTURE BUT NO SOUND
Ensure the audio RCA are securely connected.
Ensure the audio connector is not damaged.
Ensure the volume is turned up in VOL/CH setup.
Ensure you have set the player's AUDIO settings
correctly.
Ensure you have ENTERed the correct AV input for your
TV.
Ensure the audio is not set to mute.
SOUND BUT NO PICTURE
Ensure the video RCA are securely connected.
Ensure you have ENTERed the correct AV input for your
TV.
Ensure the video connector is not damaged.
Ensure you have set the player's VIDEO settings
correctly.
POOR PICTURE OR SOUND
Ensure you have set the player's AUDIO settings
correctly.
Ensure the disc is not scratched or stained.
Ensure the AV connector or the output terminal is not
damaged.
"BAD DISC" DISPLAYED
Ensure the disc is not warped, damaged or deformed.
Ensure the disc is not badly stained or damaged.
Ensure the disc format is compatible with the player.
Please check whether you have tried to play a software
CD.
If so, please restart the player.
33
REMOTE NOT WORKING
Ensure the remote batteries are working.
Point the remote control directly at the player's IR
sensor.
Remove any obstacles between the remote and the IR
sensor.
"NO DISC" DISPLAYED
Ensure you have put the disc on the tray.
Ensure the disc is not upside down.
Ensure the disc is not distorted, stained or scratched.
manual dvd-40 EN.qxd
07/10/2004
12:17
PÆgina 34
Others
Remote Control Preparation
USING THE REMOTE CONTROL
INSERT BATTERIES
1
Open the cover.
2
Insert batteries.
Point the remote control at the remote sensor.
(The pictures below are for reference only).
30º
30º
Make sure to match the "+" and "-" of the batteries with the marks inside the battery compartment.
3
Close the cover.
Notes:
Remarks:
Do not expose the remote sensor of the DVD Player to a strong
light source, such as direct sunlight.
Improper use of batteries may cause battery leakage and
corrosion. To operate the remote control correctly,follow
the instructions below:
Do not insert the batteries in the wrong direction.
Do not charge, heat, open, or short-circuit the batteries.
Do not throw batteries into a fire.
Do not leave dead batteries in the Remote Control.
Do not use different types of batteries together, or mix
old and new batteries.
If you do not use the remote control for a long period of
time, remove the batteries to avoid possible damage
from battery corrosion.
If the remote control does not function correctly or the
operating range becomes reduced, replace all batteries
with new ones.
If battery leakage occurs, clean the battery compartment, then insert new ones.
Notes:
Point the remote control directly at the player's remote
sensor.
Do not leave the remote control in an extremely hot or
humid place.
Do not spill water or put anything wet on the remote
control.
Battery life is 1 year under normal conditions.
34
manual dvd-40 EN.qxd
07/10/2004
12:17
PÆgina 35
Others
Specifications
Power requirements: 110-240 V, 50/60 Hz
Power consumption: 25 W
Video standard: NTSC/PAL/AUTO
Unit weight: 3.8 kg
Video out
Video out: 1.0 V (p-p) / 75 ohms, sync, negative polarity,
RCA pin Jack x 1
S-video output connector (separate Y/C signal output
connector):
Y output: 1.0 V (p-p) / 75 ohms, sync., negative polarity
C output: 0.286 V (p-p) / 75 ohms.
Audio out
2 channel out: 1.85 V (rms) / 10 kohms, RCA pin Jack (L, R) x
1
5.1 chanel out: RCA pin Jack x6
Coaxial out / Optical: 0.5 V (p-p) / 75 ohms, RCA pin Jack
x1
Frequency response: 20 Hz to 20 Khz
S/N ratio: > 90 dB
Total harmonic distortion: < 0.05%
[Accessories]
Video/Audio cable x3
Remote Control x1
Users Manual x1
Specifications
are
subject
to
change
without notice.
Weight and dimensions are approximate.
This product incorporates copyright protection technology
that is protected by method claims of certain U.S. patents
and other intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limitedviewing uses only unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
35
manual dvd-40 EN.qxd
07/10/2004
12:17
PÆgina 2