User manual | Canon zr10. Camcorder User Manual

Canon zr10. Camcorder User Manual
NEW SIZES
Designer Collection
Stilo
a tranquil sculpture
°
°
°
°
°
°
°
°
°
°
°
°
wall canopy rangehood
modern styling
600 cfm PRO motor
Silent Kit noise reduction
2 halogen lights for 24” / 30”
3 halogen lights for 36” / 48”
3 speed push button controls
stainless steel baffle filters
convertible to ductless*
Easy Cube mounting system
sone range: 3.5 - 6.5
6” round duct
* it is highly recommended that
professional style cooking always be
vented to the outside.
Size/Color/Model #
24 Stainless
30 Stainless (NEW)
36 Stainless
48 Stainless (NEW)
a
c
c
e
s
s
o
r
i
e
s
630006369
630006497
630006370
630006459
24” High Backsplash
24” high, mounts to the wall beneath
the rangehood for a coordinated look
6098835
30 x 24 Stainless
6098815
36 x 24 Stainless
With simple lines and
minimal styling, the Stilo
exudes modern tranquility.
30” High Backsplash
30” high, mounts to the wall beneath
the rangehood for a coordinated look
620000095
30 x 30 Stainless
620000096
36 x 30 Stainless
Ductless Conversion Kit
Includes: • Lower Chimney with holes for ducting
• Ductless Diverter Assembly • Vent Grates
High Ceiling Chimney Kit
• Charcoal Filter
One 40” upper chimney to replace 16 1/8”
Stainless
620000363
upper chimney that came with the hood
Replacement Charcoal Filter 620000041
Stainless
620000362
p.o. box 435 • Wayland, MA 01778 • tel: (508) 358-5353 • fax: (508) 358-5730 • e-mail: info@faberonline.com • www.faberonline.com
Dimensional Diagrams
Ducted
Ductless
Pre-Planning Your Installation - Important: Consult the installation instructions before you begin installing this rangehood.
5 1/8” min
16 1/8” max
upper
chimney
cover
21 1/4”
lower
chimney
cover
Ducted
19 9/32"
x
For ducted installations, the
chimneys can be adjusted for
ceilings between 7’ 4 3/4” and
8’ 9 3/4” depending on the
distance between the bottom
of the hood and the cooktop
(distance x in Ducted
diagram).
canopy
2 3/8"
min & max ceiling height examples
x = distance from hood to cooktop
(varies depending on installation)
min - 24”, suggested max - 30”
also consult cooktop
manufacturer's recommendation
36”
10" min
16 1/8” max
x = 24"
min
7' 4 3/4"
max
8' 3 3/4"
x = 26"
min
7' 6 3/4"
max
8' 5 3/4"
x = 28"
min
7' 8 3/4"
max
8' 7 3/4"
x = 30"
min
7' 10 3/4"
max
8' 9 3/4"
cabinet base
For ductless installations, the
chimneys can be adjusted
for ceilings between 7’ 9
5/8” and 8’ 9 3/4” depending
on the distance between
the bottom of the hood and
the cooktop (distance x in
Ductless diagram).
For shorter ceilings, have
the chimney cover(s) cut at
a sheet metal shop.
For
higher ceiling installations,
the High Ceiling Chimney
Kit includes a new 40” upper
chimney which would replace
the 16 1/8” upper chimney
that came with the hood.
21 1/4"
upper
chimney
cover
Ductless
ductless
lower
chimney
cover
canopy
2 3/8"
19 9/32"
x
36”
x = distance from hood to cooktop
(varies depending on installation)
min - 24”, suggested max - 30”
also consult cooktop
manufacturer's recommendation
min & max ceiling height examples
x = 24"
min
7' 9 5/8"
max
8' 3 3/4"
x = 26"
min
7' 11 5/8"
max
8' 5 3/4"
x = 28"
min
8' 1 5/8"
max
8' 7 3/4"
x = 30"
min
8' 3 5/8"
max
8' 9 3/4"
cabinet base
Note: If 24” or 30” High Backsplash is being installed, the distance between the bottom of the hood and the cooktop (distance x in diagram) is equal
to the height of the Backsplash.
Pre-Planning Your Installation - Important: Consult the installation
instructions before you begin installing this rangehood.
Make your ductrun as straight and short as possible. The ductrun should not exceed
35 equivalent feet if ducted with the required minimum of 6” round duct. Count 45º
angles as 3 feet, 90º elbows as 5 feet, and 90º flat elbows as 12 feet.
For best results, use no more than three 90° elbows. Make sure that there is a
minimum of 24” of straight duct between elbows if more than one is used. Do
not install two elbows together. If you must elbow right away, do it as far away
from the hood’s exhaust opening as possible.
WARNING!
Ductless Installations*
For installations where ductwork is impossible or highly impractical, a Ductless
Conversion Kit is available. A charcoal
filter, which attaches under the blower
assembly, absorbs smoke and odors. A
ductless diverter assembly directs the air
out to a lower chimney with vent grates cut
into the sides.
* it is highly recommended that
professional style cooking always be
vented to the outside.
Rev. 06/08
Product specifications are subject to change without notification. Consult the installation instructions before you begin installing this rangehood.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising