Casio 1935-1 Watch User Manual

1934/1935-1
GENERAL GUIDE
•
•
•
•
If the digital display of your watch is continually changing, see “AUTO DISPLAY FUNCTION” for information on how to stop it.
The operational procedures for Module 1934 and 1935 are identical. All of the illustrations in this manual show Module 1934.
Press D to change from mode to mode.
Module 1935 has a display with white figures on a black background.
Timekeeping Mode
Data Bank Mode
Alarm Mode
Stopwatch Mode
Press D.
[Module 1935]
[Module 1934]
TIMEKEEPING MODE
To select a city code
In the Timekeeping Mode you can view the current time and current date for your
home time zone, as well as the current time in one other time zone.
Home Time
Dual Time
Hour : Minutes
Date
City Code
Month - Day
Seconds
Day of week
1. In the Timekeeping Mode, hold down B for about two seconds to display the Dual
Time screen.
• The Dual Time screen is the one with the DUAL indicator.
• If you want to change the Home Time city code, display the Home Time screen
instead of the Dual Time screen.
2. Hold down C until the city code starts to flash.
3. Use A and B to scroll through the city codes until you find the one you want to set.
• B scrolls forward, while A scrolls back through city codes. Holding down either
button scrolls through the city codes at high speed.
• See the “CITY CODE TABLE” at the back of this manual for a complete list of
available codes.
4. After you select a city code, press C to return to the Timekeeping Mode.
To switch between standard time and daylight saving time
DUAL indicator
DATE indicator
• You can separately specify one of 40 cities around the world for your Home Time
and Dual Time. See the “CITY CODE TABLE” at the back of this manual for a list of
available time zones.
• To switch between the Home Time and Dual Time screens, hold down B for about
two seconds. The DUAL indicator remains on the display in all modes while the
Dual Time screen is selected.
• Pressing B while the Home Time screen is on the display shows the city code of
the Dual Time, followed by the current time in that city. After a few moments, the
display changes back to the Home Time Screen. Pressing B while the Dual Time
screen is on the display momentarily shows the Home Time city code and then
time.
• To display the Date screen, press C . The Home Time date appears if C is pressed
while the Home Time screen is displayed, while the Dual Time date appears if C is
pressed while the Dual Time screen is displayed. In either case, the display changes
back to the time screen after a few moments.
• Whenever you enter the Timekeeping Mode, the display first shows the city code
(for either the Home Time or Dual Time, depending on what screen was on the
display the last time you left the Timekeeping Mode), and then the current time in
that city.
Daylight Saving Time (DST), which is also sometimes called “summer time,” advances the time for one hour, as is the custom in some areas during the summer. Remember that not all countries or even local areas use Daylight Saving Time.
1. In the Timekeeping Mode, use B to display the time screen (Home Time or Dual
Time) whose Daylight Saving Time setting you want to change.
2. Hold down C until the city code starts to flash.
DST indicator
DATA BANK MODE
Mode indicator
To set the time and date
Times and dates are linked, so changing the setting for any time zone (city) automatically changes the setting for all other time zones. The following time and date setting
procedure is explained using the Home Time screen, but you can also change settings using the Dual Time screen. See “To select a city code” for details on selecting
a time zone for the Home Time and Dual Time screens.
1. In the Timekeeping Mode, hold down B until the Home
Time Screen appears.
2. Hold down C until the city code starts to flash. The city
code flashes because it is selected.
3. Use A and B to scroll through the city codes until you
find the one you want to set as your home city.
• B scrolls forward, while A scrolls back through city
codes. Holding down either button scrolls through the
city codes at high speed.
• See the “CITY CODE TABLE” at the back of this manual for a complete list of available codes.
4. Press D to change the selection in the sequence below.
• See “To switch between standard time and daylight saving time” for details on DST
On/Off setting.
City Code
City Code
Day
DST
On/Off
Month
Seconds
Year
Hour
3. Use D to select the DST On/Off setting.
• The DST indicator flashes along with the current on ( AN)/
off ( Af) setting.
4. Press B to toggle Daylight Saving Time on and off.
5. After you are finished making the setting you want, press
C to return to the Timekeeping Mode.
• The DST indicator appears on the display to indicate
that daylight saving time is turned on.
• The daylight saving time setting you make is applied
only to the time (Home Time or Dual Time) whose screen
is on the display when you start the above procedure.
You have to make separate settings for Home Time and
Dual Time.
Name
The Data Bank Mode lets you store up to 30 pairs of name
and telephone number data. Data is automatically sorted
based on the characters of the name. You can recall data
by scrolling through it on the display.
• See the “CHARACTER LIST” at the back of this manual
for details on how the watch sorts data.
• The Remaining Memory Screen appears when there is
no data stored in memory, or when you scroll to the location between the last and the first data items stored in
memory.
• The name screen of the data item on the display when
you exit the Data Bank Mode appears first the next time
you enter the Data Bank Mode.
• If you do not operate any button for a few minutes while
in the Data Bank Mode, the watch automatically goes
back to the Timekeeping Mode.
[Remaining Memory Screen]
To input new Data Bank data
Cursor
Minutes
12/24-Hour format
Separator NAME indicator
1. In the Data Bank Mode, press B until the remaining
memory screen appears.
• If the message FULL appears on the display, it
means that memory is full. To store more data, you will
first have to delete some of the data stored in memory.
2. Hold down C until the flashing cursor appears on the
display.
• A separator is input automatically between the last character and the first character of the data.
• The NAME indicator appears when the cursor is currently located in the text field.
5. While the seconds digits are selected (flashing), press
B to reset the seconds to AA. If you press B while the
seconds count is in the range of 30 to 59, the seconds
are reset to AA and 1 is added to the minutes. If the
seconds count is in the range of 00 to 29, the minutes
count is unchanged.
3. Use A and B to change the character at the cursor position in the text field. The
character changes in the following sequence.
6. While hour, minutes, year, month, or day is selected (flashing), press B to increase the setting or A to decrease it. While the 12/24-hour setting is selected,
press B to switch between the two formats.
• Holding down either button changes the current selection at high speed.
• When the 12-hour format is selected, the BCL indicator appears on the display.
With the 12-hour format, the PM indicator appears on the display to indicate “p.m.”
times. There is no indicator for “a.m.” times. Selecting the 24-hour format causes
the CZL indicator to appear on the display.
7. After you set the time and date, press C to return to the Timekeeping Mode (Home
Time screen).
• The day of the week is automatically set in accordance with the date.
• The date can be set within the range of January 1, 1995 to December 31, 2039.
• If you do not operate any button for a few minutes while a selection is flashing, the
flashing stops and the watch goes back to the Timekeeping Mode automatically.
• Holding down either button changes the character at high speed.
4. When the character you want is at the cursor position, press D to move the cursor
to the right.
5. Repeat steps 3 and 4 until your text is complete.
• You can input up to eight characters in the text field.
6. After you input a name, use D to move the cursor to the number field.
• The NAME indicator is cleared and the TEL indicator appears when the cursor is in
the number input field.
• You can input up to eight characters for the name. After you input the eighth character, pressing D causes the cursor to jump to the first digit of the number.
• You can input up to 12 digits for the number. After input the twelfth digit, pressing D
causes the cursor to jump back to the first character of the name.
7. Use A and B to change the character (space, number, or hyphen) at the cursor
position in the number field. The character changes in the following sequence.
Press
.
Press
.
(space)
Press
.
Press
.
(space)
to
to
to ?
? at high speed.
• Holding down either button changes the character
1934/1935-2
8. When the character you want is at the cursor position, press D to move the cursor
to the right.
9. Repeat steps 7 and 8 until you complete number input.
• You can input up to 12 digits in the number field.
10. After inputting your data, press C to store it.
• When you press C to store data, the watch takes a few seconds to sort memory
data. After the sort operation is complete, the watch returns to the normal Data
Bank Mode (without the cursor).
• Unused spaces at the end of the name and number fields are automatically filled in
with “ t” whenever the number of characters you input in these fields is less than
the allowable maximum (8 characters for the name, 12 digits for the number). These
filler characters appear on the display whenever you recall data.
• If you do not perform any button operation for a few minutes while the cursor is on
the display, the watch automatically returns to the normal Data Bank Mode (without
the cursor).
STOPWATCH MODE
The Stopwatch Mode lets you measure elapsed time, split
times, and two finishes. The range of the stopwatch is 59
minutes, 59.99 seconds.
Mode indicator
1/100 second
Minutes
Seconds
To recall Data Bank data
1. In the Data Bank Mode, press B to scroll through stored data items.
• Holding down B scrolls through the data at high speed.
• Only name data appears when you are scrolling through stored data items.
2. Press C to toggle the screen between the name and number data.
[Name Screen]
[Number Screen]
Press C.
(a) Elapsed time measurement
Start
Stop
Re-start
Stop
Clear
Split release
Stop
Clear
Split
Stop
Split release
Clear
First runner
finishes.
Second runner
finishes.
Record time of
first runner.
Record time of
second runner.
(b) Split time measurement
Start
NAME indicator
TEL indicator
• The name and number scroll from right to left on the screen. A separator (<) is
inserted between the last character and first character of the data.
Start
To edit Data Bank data items
1. In the Data Bank Mode, scroll through the data items and display the one you want
to edit.
2. Hold down C until the first character of the name starts to flash on the display.
3. Use D to move the flashing to the character you want to change.
4. Use A and B to change character.
• For details on inputting characters, see “To input new Data Bank data” (steps 3 for
name input and 7 for number).
5. After making the changes that you want, press C to store them and return to the
Data Bank Mode.
To delete Data Bank data
1. In the Data Bank Mode, scroll through the data items and display the one you want
to delete.
2. Hold down C until the first character of the name starts to flash on the display.
3. Press A and B at the same time to delete the data item.
• At this time the cursor appears on the display, ready for input.
4. Input data or press C to return to the Data Bank Mode.
Split
(c) Split time and 1st-2nd place times
BACKLIGHT
In any mode, press A to illuminate the display for about two seconds.
• The portion of the display illuminated by the backlight depends on the watch model.
With some models, smaller indicators may not be made visible by backlight illumination. Be especially careful when checking the Home Time and Dual Time indicators.
• The backlight of the watch employs an electro-luminescent (EL) light, which loses
illuminating power after very long use.
• The illumination provided by the backlight may be hard to see when viewed under
direct sunlight.
• The watch will emit an audible sound whenever the display is illuminated. It does
not indicate malfunction of the watch.
• The backlight automatically stops illuminating whenever an alarm sounds.
• Pressing any button besides A while the backlight is lit turns it off.
ALARM MODE
Mode indicator
Hour : Minutes
Alarm on indicator
Hourly time signal
on indicator
When the Daily Alarm is turned on, the alarm sounds for
20 seconds at the preset time each day. Press any button
to stop the alarm after it starts to sound.
When the Hourly Time Signal is turned on, the watch beeps
every hour on the hour.
• The alarm sounds whenever the time displayed in the
Timekeeping Mode reaches the alarm time and the Hourly Time Signal sounds at the top of each hour, regardless of whether you are using the Home Time screen or
Dual Time screen.
• Note that switching between the Home Time and Dual
Time screen in the Timekeeping Mode has no effect on
the Daily Alarm time setting. If you set an alarm time of
4:00 pm for your Home Time and then change to the
Dual Time screen, the Daily Alarm will start to sound
when the Dual Time reaches 4:00 pm.
AUTO DISPLAY FUNCTION
The Auto Display function of this watch continually changes the contents of the digital display. Note that you cannot use any of the watch’s other functions (except for backlight) while the Auto Display function is operating.
To turn the Auto Display off
Hold down D for about three seconds until the watch
beeps.
To turn Auto Display on
On-screen button labels
Hold down D for about three seconds until the watch
beeps.
Note
The Auto Display function cannot be performed while you are making settings (i.e.
while digits or other settings are flashing on the display).
To set the alarm time
1. Hold down C while in the Alarm Mode until the hour digits start to flash on the
display. The hour digits flash because they are selected.
• This operation will turn the Daily Alarm on automatically.
2. Press D to change the selection in the following sequence.
Hour
Minutes
3. Press B to increase the selected digits or A to decrease them. Holding down
either button changes the selection at high speed.
• The format (12-hour and 24-hour) of the alarm time matches the format you select
for normal timekeeping.
• When setting the alarm time using the 12-hour format, take care to set the time
correctly as morning (no indicator) or afternoon (PM).
4. After you set the alarm time, press C to return to the Alarm Mode.
• If you do not operate any button for a few minutes while a selection is flashing, the
flashing stops and the watch goes back to the Alarm Mode automatically.
To turn the Daily Alarm and Hourly Time Signal on and off
Press B while in the Alarm Mode to change the status of the Daily Alarm and Hourly
Time Signal in the following sequence.
[Alarm ON Indicator/Hourly Time Signal ON Indicator]
Both ON
Both OFF
Daily Alarm
Only
To test the alarm
Hold down B while in the Alarm Mode to sound the alarm.
Hourly Time
Signal Only
About On-screen Button Labels (Module 1934 only)
This watch features on-screen button labels that indicate the function of each button.
You can use the following procedure to turn these labels on and off.
To turn on-screen button labels on and off
While the Auto Display function is turned on, press C to toggle the on-screen button
labels on and off.
• The on-screen button label setting you select remains in effect even when you turn
off the Auto Display function.
1934/1935-3
CITY CODE TABLE
City
Code
ADL
ANC
BER
BKK
CAI
CCS
CHI
DAC
DEL
DEN
DXB
GUM
HKG
HNL
IST
JED
JRS
KBL
KHI
LAX
LON
MEX
MIA
MIL
MLE
NOU
NYC
PAR
PPG
RGN
RIO
ROM
SEL
SFO
SIN
SYD
THR
TYO
WLG
YVR
City
ADELAIDE
ANCHORAGE
BERLIN
BANGKOK
CAIRO
CARACAS
CHICAGO
DHAKA
DELHI
DENVER
DUBAI
GUAM
HONG KONG
HONOLULU
ISTANBUL
JEDDAH
JERUSALEM
KABUL
KARACHI
LOS ANGELES
LONDON
MEXICO CITY
MIAMI
MILAN
MALE
NOUMEA
NEW YORK
PARIS
PAGO PAGO
YANGON
RIO DE JANEIRO
ROME
SEOUL
SAN FRANCISCO
SINGAPORE
SYDNEY
TEHRAN
TOKYO
WELLINGTON
VANCOUVER
GMT
differential
+9.5
–09
+01
+07
+02
–04
–06
+06
+5.5
–07
+04
+10
+08
–10
+02
+03
+02
+4.5
+05
–08
+00
–06
–05
+01
+05
+11
–05
+01
–11
+6.5
–03
+01
+09
–08
+08
+10
+3.5
+09
+12
–08
*Based on data as of June 1998.
*The GMT differentials used by this watch are
based on Universal Time Coordinated
(UTC) data.
CHARACTER LIST
1
(space)
11
J
21
T
31
3
2
A
12
k
22
U
32
4
3
B
13
L
23
V
33
5
4
C
14
M
24
W
34
6
5
D
15
N
25
X
35
7
6
E
16
O
26
Y
36
8
7
F
17
P
27
Z
37
9
8
G
18
Q
28
^
38
t
39
-
9
H
19
R
29
1
10
I
20
S
30
2