Casio 2075 Watch User Manual

Module No. 1993/2075
1993/2075-1
ABOUT THIS MANUAL
B
B
C
A
A
P
M
P
(LIGHT)
L
(MODE)
• The operational procedures for Module 1993 and 2075 are identical. All of the illustrations
in this manual show Module 1993.
• Button operations are indicated using the letters shown in the illustration.
C
M
L
(MODE)
[Module 1993]
(LIGHT)
[Module 2075]
GENERAL GUIDE
Identification (ID) Mode
• Press M to change from mode to mode. Each mode is explained in detail on the
following pages.
• In any mode, press L to illuminate the display.
Telememo Mode
▲
▲
B
▲
Timekeeping Mode
C
A
Vital Statistics Mode
▲
Stopwatch Mode
Alarm Mode
▲
▲
P
M
L
TIMEKEEPING MODE
Graphic area
Month – Day
Year
Day
of week
B
A
C
In addition to normal timekeeping, the Timekeeping Mode
is also used to set the current time and date, and to turn the
EL alarm on and off.
• In the Timekeeping Mode, graphic area indicates counting
of seconds.
To set the time and date
1. Press A while in the Timekeeping Mode. The seconds
digits flash on the display because they are selected.
2. Press M to change the selection in the following
sequence.
P
M
L
Hour
Minutes
Seconds
Hour
Minutes
To turn the EL alarm on and off
In the Timekeeping Mode, hold down B for one or two
B
displayed) and off
seconds to toggle the EL alarm on (
C
A
(
not displayed).
• The EL alarm on indicator remains on the display in all
modes until you switch the EL alarm off.
P
• The above operation controls operation of the EL alarm
only. It does not affect operation of audible tones and
M
signals.
L
• When an alarm is reached while the EL alarm is turned
on, the flashing of the backlight and the timing of the alarm
EL alarm on indicator
tones may not be exactly matched. This is normal and
does not indicate malfunction.
12/24-hour
format
TELEMEMO MODE
Seconds
PM indicator
Day
Month
Year
3. While the seconds digits are selected (flashing), press B to reset the seconds to 00.
If you press B while the seconds count is in the range of 30 to 59, the seconds are
reset to 00 and 1 is added to the minutes. If the seconds count is in the range of 00
to 29, the minutes count is unchanged.
4. While any other digits (besides seconds) are selected (flashing), press B to increase
the number. While the 12/24-hour setting is selected, press B to switch between the
two formats.
• Holding down B changes the current selection at high speed.
• When the 12-hour format is selected, the 12H indicator appears on the display. With
the 12-hour format, the P (PM) indicator appears on the display to indicate “p.m.”
times. There is no indicator for “a.m.” times.
• Selecting the 24-hour format causes the 24H and the 24 indicators to appear on the
display.
5. After you set the time and date, press A to return to the Timekeeping Mode.
• The day of the week is automatically set in accordance with the date.
• The date can be set within the range of January 1, 1995 to December 31, 2039.
• If you do not operate any button for a few minutes while a selection is flashing, the
flashing stops and the watch goes back to the Timekeeping Mode automatically.
BACKLIGHT
The backlight uses an EL (electro-luminescent) panel that causes the entire display to
glow for easy reading in the dark. An EL alarm feature can be turned on so the backlight
flashes whenever an alarm or hourly time signal sounds.
• Pressing L in any mode illuminates the display for about three seconds, regardless
of the EL alarm on/off setting.
• The backlight of this watch employs an electro-luminescent (EL) light, which loses its
illuminating power after very long term use.
• The backlight remains lit for about three seconds from the point you press L, even if
it already lit when you press L. If you keep L depressed for one or two minutes, the
backlight will automatically turn off.
• The illumination provided by the backlight may be hard to see when viewed under
direct sunlight.
• The backlight automatically stops illuminating whenever an alarm sounds.
• The watch will emit an audible sound whenever the display is illuminated. It does not
indicate malfunction of the watch.
Mode indicator
Text area
B
A
M
C
L area
Number
The Telememo Mode lets you store up to 20* pairs of name
and telephone number data. Stored data is sorted
automatically into alphabetic sequence based on the
characters of the name.
* The Telememo Mode shares memory with the Identification
(ID) Mode. This means that the maximum number of
Telememo Mode entries you can store is reduced by one
each time you store Identification Mode.
To check remaining memory
In the Telememo Mode, hold down B and C to display
how much memory remains for input of data. The value that
appears shows how many more data items (Telememo Mode
and ID Mode) you can input.
• This watch has three built-in ID Mode titles, which are programmed in memory when
you first purchase the watch and which are automatically set whenever the watch’s
battery is replaced. Because of this, the remaining memory display shows a value of
17 (20 – 3) whenever it is performed immediately after you purchase the watch or
have the battery changed.
To input new Telememo data
1. In the Telememo Mode, press B or C until the new
data screen appears.
•
If there is no Telememo data stored in memory yet, the
B
new data screen appears as soon as you enter the
C
A
Telememo Mode.
• If the message FULL appears in the text area, it means
that memory is full. To store more data, you will first have
to delete some of the data stored in memory.
2. Press A and a cursor appears in the text area.
M
3. Input a name in the text area and a telephone number in
L Screen]
[New Data
the number area.
• You can input up to eight characters in the text area, and
Number area
12 digits in the number area.
Cursor
Text area
Use B and C to input characters, and M to move the cursor around the display.
For details, see “How to input characters”.
• Make sure that you distinguish between the letter O and the number 0 (zero). Inputting
a zero for the letter O will affect automatic sorting.
4. After inputting your data, press A to store it and return to the Telememo Mode.
• The text area can show only five characters at a time, so longer messages scroll
continuously right to left.
1993/2075-2
To recall Telememo data
In the Telememo Mode, press B to scroll forward through stored data items or C to
scroll in reverse.
• Holding down either button scrolls through the data at high speed.
• The data item that is displayed when you exit the Telememo Mode is still displayed the
next time you enter the Telememo Mode.
• The built-in titles PASSP, LICEN, and CREDI always appear in the above
sequence, along with the display for input of a new title. Titles you previously created
when inputting other data do not appear.
• If you want to input your own title for the data, select -----.
4. Press M and a cursor appears in the text area.
5. Input a title in the text area and a number in the number area.
• You can input up to eight characters in the text area, and 12 digits in the number area.
To edit Telememo data items
1. In the Telememo Mode, scroll through the data items and display the one you want to
edit.
2. Press A and a cursor appears in the text area.
3. Use M to move the cursor to the character you want to change.
4. Change the character.
• See “How to input characters” for details.
5. After making the changes that you want, press A to store them and return to the
Telememo Mode.
To delete Telememo data
1. In the Telememo Mode, scroll through the data items and display the one you want to
delete.
2. Press A and a cursor appears in the text area.
3. Press B and C at the same time to delete the Telememo data item.
• At this time the cursor appears in the text area, ready for input.
4. Input data or press A to return to the Telememo Mode.
Use B and C to input characters, and M to move the cursor around the display.
For details, see “How to input characters”.
• If you are using a built-in title, you can append up to eight characters to the built-in title.
• To use a built-in title as it is without appending text, press M eight times to move the
cursor to the number area.
6. After inputting your data, press A to store it and return to the normal ID Mode data
screen.
• The text area can show only five characters at a time, so longer titles scroll continuously
right to left.
To recall ID Mode data
In the ID Mode, press B to scroll forward through stored data items or C to scroll in
reverse.
• Holding down either button scrolls through the data at high speed.
• The data item that is displayed when you exit the ID Mode is still displayed the next
time you enter the ID Mode.
To edit ID Mode data items
IDENTIFICATION (ID) MODE
Mode indicator
Text area
B
A
M
C
With the Identification (ID) Mode, you can input up to 20*
sets of data, each of which contains a title (such as passport,
credit card, etc.) and a number. Data is automatically sorted
into the alphabetic sequence of the titles.
* The ID Mode shares memory with the Telememo Mode.
This means that the maximum number of ID Mode entries
you can store is reduced by one each time you store
Telememo Mode.
Larea
Number
Important!
The ID Mode is useful for storing important data like passport numbers, license numbers,
credit card numbers, etc. Note, however, that storing such important data in the watch’s
memory runs the risk of it being misused should you lend the watch to someone, or should
the watch become lost or stolen. Because of this, the manufacturer strongly recommends
that you store such important information in coded form that cannot be understood by
others.
Note that CASIO COMPUTER CO., LTD. shall not be held liable to you or any third party
for any losses or damages suffered through the misuse of data stored in the memory of
this watch.
1. In the ID Mode, scroll through the data items and display the one you want to edit.
2. Press A and the characters in the text area begin to flash.
• You can also use this procedure to edit built-in title names.
3. Use M to move the cursor to the character you want to change.
4. Change the character.
• See “How to input characters” for details.
5. After making the changes that you want, press A to store them and return to the ID
Mode.
To delete ID Mode data items
1.
2.
3.
4.
In the ID Mode, scroll through the data items and display the one you want to delete.
Press A and the characters in the text area begin to flash.
Press B and C at the same time to delete the ID data item.
Press A to return to the ID Mode.
VITAL STATISTICS MODE
The Vital Statistics Mode provides space in memory for storage of your name, blood
type, and the date of your birth.
To recall Vital Statistics data
About titles
• This watch has three built-in ID Mode titles: PASSPORT, LICENSE, and
CREDIT (credit card). You can use these built-in titles as they are, append eight
more characters to a built-in title (to indicate a credit card company name, for example),
or change a built-in title to a different one.
• In addition to the three built-in titles, you can also input your own titles, up to eight
characters long.
• You can input more than one set of data using the same title.
In the Vital Statistics Mode, press B or C to change the data on the display in the
following sequence.
Press B
B
Text area
C
A
About automatic sorting
ID Mode data items are automatically sorted according to their titles. The three built-in
titles come first, followed by the titles you input, in alphabetical order.
A
M
C
L
In the ID Mode, hold down B and C to display how much
memory remains for input of data. The value that appears
shows how many more data items (Telememo Mode and
Identification Mode) you can input.
• This watch has three built-in ID Mode titles, which are
programmed in memory when you first purchase the watch
and which are automatically set whenever the watch’s
battery is replaced. Because of this, the remaining memory
display shows a value of 17 (20 – 3) whenever it is
performed immediately after you purchase the watch or
have the battery changed.
To input new ID Mode data
Text area
B
A
C
1. In the ID Mode, press B or C until the text area of the
display shows either one of the built-in titles or the new
data screen.
• If the message FULL appears in the text area, it means
that memory is full. To store more data, you will first have
to delete some of the data already stored in memory.
M
L Screen]
[New Data
2. Press A and the characters in the text area begin to
flash.
3. Use B and C to display a built-in title or new title input
( ----- ). Each press of B and C changes the
selected title in the following sequence.
Press B
PASSP
(PASSPORT)
Number area
Blood type
Date of Birth
• The name display always appears first whenever you enter the Vital Statistics Mode.
Important!
• In the blood type display, the text area shows the blood type (A, B, O, AB) and
the number area indicates the Rh factor (+ or –). If no blood type data is stored in
memory (after you purchase the watch or have the battery replaced), the text
area shows “–” and the number area shows “RH”. Since these indicators can
easily be misunderstood as meaning “RH negative,” we recommend that you
input the correct blood type data as soon as possible when necessary.
• Use the Vital Statistics Mode to store your own personal data (name, blood type, date
of birth). Once you input your personal data, take care that the watch is not borrowed
by another person. Otherwise, emergency medical personnel may assume that your
data in the Vital Statistics Mode applies to the person who borrowed the watch.
• Data stored in the Vital Statistics Mode is cleared when you have the battery of the
watch replaced. Be sure to input data again after battery replacement.
To input your name
Cursor
B
A
Number area
Name
L
Press C
To check remaining memory
B
M
LICEN
(LICENSE)
CREDI
(CREDIT)
Press C
-----
C
1. In the Vital Statistics Mode, display the NAME screen.
2. Press A and a cursor appears in the text area.
3. Input your name into the text area.
• You can input up to 20 characters for your name.
Use B and C to input characters, and M to move
the cursor around the display. For details, see “How to
input characters”.
M
L
• You can clear the characters currently input for the name by pressing B and C at the
same time.
4. After inputting your data, press A to store it and return to the normal NAME screen.
• The text area can show only five characters at a time, so a longer name scrolls
continuously right to left.
1993/2075-3
To input your blood type
Blood type ABO
B
C
A
INPUTTING TEXT
1. In the Vital Statistics Mode, display the BLOOD screen.
2. Press A and the blood type ABO appears in the text
area.
3. Use B and C to scroll through the available blood types
in the following sequence:
Press B
The following describes how to input text in the Telememo Mode, ID Mode, and Vital
Statistics Mode.
How to input characters
B
-
M
A
B
L
Rh factor
O
AB
Day
Month
C
1. In the Vital Statistics Mode, display the BIRTH screen.
2. Press A and the year digits flash in the number area
because they are selected.
3. Press M to change the selection in the following
sequence:
Day
Month
Year
M
L
Year
4. Press B to increase the selected digits and C to decrease them. Holding down
either button changes the selected digits at high speed.
• The year can be set in the range of 1900 to 2039.
5. After inputting your data, press A to store it and return to the normal BIRTH screen.
Mode indicator
B
C
A
To set the alarm time
1. Press A while in the Alarm Mode. The hour digits flash
on the display because they are selected.
• This operation will turn the Daily Alarm on automatically.
2. Press M to change the selection in the following
sequence.
Hour L
Minutes
Minutes
Hour
Alarm on indicator
3. Press B to increase the selected digits. Holding down B changes the selection at
high speed.
• The format (12-hour and 24-hour) of the alarm time matches the format you select for
normal timekeeping.
• When setting the alarm time using the 12-hour format, take care to set the time correctly
as morning (no indicator) or afternoon (P).
4. After you set the alarm time, press A to return to the Alarm Mode.
To turn the Daily Alarm and Hourly Time Signal on and off
Press B while in the Alarm Mode to change the status of the Daily Alarm and Hourly
Time Signal in the following sequence.
[Hourly Time Signal ON Indicator/Alarm ON Indicator]
Both ON
Both OFF
Daily Alarm
Only
Hourly Time
Signal only
To test the alarm
Hold down C while in the Alarm Mode to sound the alarm.
STOPWATCH MODE
1/100 second
Mode indicator
B
M
L
:
Number area
C
Hours L
Minutes
Seconds
The Stopwatch Mode lets you measure elapsed time, split
times, and two finishes. The range of the stopwatch is 23
hours, 59 minutes, 59.99 seconds.
(a) Elapsed time measurement
JB
B
JB
Start
Stop
Re-start
JB
(b) Split time measurement
JC
JC
B
Start
Split
Split release
JB
Stop
Stop
JC
Clear
JC
Clear
(c) Split time and 1st-2nd place times
JC
JC
B
JB
JC
Start
Split
Stop
Split release Clear
First runner
finishes.
Second runner
finishes.
Record time of
first runner.
/
.
-
0 to 9
• Holding down either button scrolls through at high speed.
• You can input English alphabetic characters, numbers, and symbols in the text area.
For a complete list of characters you can input, see the “CHARACTER LIST”.
2. When the character you want at the cursor position is shown, press M to move the
cursor to the right.
3. Repeat steps 1 and 2 until your text is complete.
• The text area in the Telememo Mode and ID Mode can hold up to eight characters.
When the cursor is located at the eighth space of the text area in these modes, moving
the cursor to the right causes it to jump down to the first digit in the number area. When
the cursor is at the 12th digit of the number area, moving it to the right causes it to jump
back up to the first character of the text area.
• You can input only numbers and spaces in the number area. Each press of B or C
changes the input at the current cursor location in the following sequence:
Press B
x
Press C
When the Daily Alarm is turned on, the alarm sounds for 20
seconds at the preset time each day. Press any button to
stop the alarm after it starts to sound.
When the Hourly Time Signal is turned on, the watch beeps
every hour on the hour.
Hourly time signal
on indicator
A
M
A to Z
0 to 9
(space)
• If you do not perform any button operation for about two or three minutes while the
cursor is on the display, the watch automatically returns to the normal data display (the
cursor disappears).
ALARM MODE
M
C
(space)
To input the date of your birth
A
A
Press C
4. Press M to advance to specification of the Rh factor.
• At this time the current Rh factor (xx or *) will flash on the display.
5. Press B or C to select either xx (negative) or * (positive).
6. After inputting your data, press A to store it and return to the normal BLOOD screen.
B
1. When the cursor is blinking in the text area, use B and
C to scroll through the available letters, numbers and
symbols, in the following sequence.
Press C
Press B
Text area
Cursor
Record time of
second runner.
CHARACTER LIST
1
2
3
4
5
6
7
8
9
(space)
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41