PLUNGERS AND CYLINDERS FOR TYPE B AND F DEPOSITORS 7SSx [size] Plain Plunger

belshaw-adamatic.com

Quality bakery equipment for more than 80 years

1-800-578-2547 ▪ [email protected] ▪ www.belshaw-adamatic.com

PLUNGERS AND CYLINDERS FOR TYPE B AND F DEPOSITORS

Photo Donut type Item Number

7SSx [size]

[size]=1-1/2, 1-5/8, 1-3/4, 1-7/8, or 2

Example: 7SSx1-1/2

Size = diameter in inches

Plunger variety

Plain Plunger

Used for plain ring donuts (using standard cake donut mix) or for 'Old

Fashion' donuts (using Old Fashion mix).

7SC-SSx [size]

[size]=1-1/2, 1-5/8, 1-3/4, 1-7/8, or 2

Example: 7SC-SSx1-1/2

Size = diameter in inches

Star Plunger

The Star plunger typically makes a ring donut with a more consistent, rounder hole than the plain plunger, with a star pattern around it.

7B-1009x [size]

[size]=1-1/2, 1-5/8, 1-3/4, 1-7/8, or 2

Example: 7B-1009x1-7/8

Size = diameter in inches

7F-1004x [size]

[size]=1-1/2, 1-5/8, 1-3/4, 1-7/8, or 2

Example: 7B-1004x2

Size = diameter in inches

French Cruller Plunger

French Cake Plunger

Use with French Cruller mix to make

French Crullers. You can also make a

'French Cake' donut that is made with standard cake donut mix and looks similar, but without the eggy flavor.

Krinkle Plunger

This can be the most attractive of all the cake donuts. Features eight distinctive ball shaped sections all joined together like a necklace.

7G-1000[code]

[code]=4 digit code for diameter, number of holes, and size of holes.

Ball plungers are made to order.

Contact Belshaw when ordering

Example: 7G-1000-082D

7H-1000[code]

(makes 1)

7H-1001[code]

(makes 2)

[code]=4 digit code for diameter, height and lenght of slot

Example: 7H-1001-102AE

Stick plungers are made to order.

Contact Belshaw when ordering

7-1025x1-3/4

[size]=1-3/4 only

Size = diameter in inches

Ball Plunger

(2,3,4 or 5 Holes)

Produces ball shaped donuts or 'donut holes'. With a compatible mix recipe, can also make other products such as hushpuppies, loukoumades, falafel, fish balls, and more.

Stick Plunger

(1 or 2 Slots)

Makes stick donuts with 1 or 2 slots.

The size of the donut will depend on the size of the slot and on the dial setting of the depositor. (Setting 1 will be short, setting 2 or 3 will be longer)

Dunkerette Plunger

Plain plunger with a divider that forms 3 deposits, each approximately one third of a ring donut

35SSAx [size A]

35SSBx [size B]

[size A]=1-1/2, 1-5/8, or 1-3/4

[size B]=1-7/8 or 2

Example: 35SSAx1-3/4

Example: 35SSBx2

Size = diameter in inches

Cylinder for Type B/F

Plunger size and cylinder size must always match. For example, a 1-3/4" plunger must always be used with a

1-3/4" cylinder. However, you can use any variety of 1-3/4" plunger with a cylinder of the same size.

BELSHAW ADAMATIC BAKERY GROUP 206-322-5474 ▪ 800-578-2547 ▪ [email protected]

814 44th St NW, Suite 103, Auburn, WA 98001 USA • www.belshaw-adamatic.com

©2011 Belshaw Adamatic Bakery Group ▪ Product specifications may be changed without notice.