Casio 3297 Watch User Manual

Ú#!3)/#/-054%2#/,4$
MA1204-EA
Operation Guide 3297
About This Manual
Contents
x Depending on the model of your watch, display text appears
either as dark figures on a light background or light figures
on a dark background. All sample displays in this manual
are shown using dark figures on a light background.
x Button operations are indicated using the letters shown in
the illustration.
x Each section of this manual provides you with the
information you need to perform operations in each mode.
Further details and technical information can be found in the
“Reference” section.
General Guide .......................................................................................................... E-4
Timekeeping............................................................................................................. E-6
World Time ............................................................................................................. E-12
Stopwatch .............................................................................................................. E-14
Countdown Timer .................................................................................................. E-17
Alarms .................................................................................................................... E-23
Illumination ............................................................................................................ E-30
Reference ............................................................................................................... E-31
Specifications ........................................................................................................ E-37
E
E-1
Procedure Lookup
The following is a handy reference list of all the operational procedures contained in
this manual.
To set the time and date ......................................................................................... E-7
To toggle the Timekeeping Mode time between DST and Standard Time ....... E-10
To toggle between 12-hour and 24-hour timekeeping ....................................... E-11
To view the time for another city code ................................................................ E-12
To toggle a city code time
between Standard Time and Daylight Saving Time ........................................ E-13
To measure times with the stopwatch................................................................. E-15
To use Auto-Start .................................................................................................. E-16
To configure the countdown timer ...................................................................... E-20
To use the countdown timer................................................................................. E-22
To set an alarm time .............................................................................................. E-25
To test the alarm .................................................................................................... E-27
To turn an alarm on and off .................................................................................. E-28
To turn the Hourly Time Signal on and off .......................................................... E-29
To illuminate the display....................................................................................... E-30
To specify the illumination duration .................................................................... E-30
To turn Flash Alert on and off .............................................................................. E-32
To turn the button operation tone on and off ..................................................... E-33
E-2
E-3
General Guide
x Press C to change from mode to mode.
x In any mode, press L to illuminate the display.
Timekeeping Mode
World Time Mode
Stopwatch Mode
Countdown Timer
Mode
C
C
C
Alarm Mode
C
C
E-5
E-4
To set the time and date
Timekeeping
Month – Day
Day of week
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. Press C to move the flashing in the sequence shown
below to select other settings.
Use the Timekeeping Mode to set and view the current
time and date.
Read This Before You Set the Time and Date !
The times displayed in the Timekeeping Mode and World
Time Mode are linked. Because of this, make sure you
select the UTC offset before you set the time and date.
Seconds
PM indicator
Seconds
Hour : Minutes Seconds
C
C
DST
UTC Offset
C
Hour
C
Flash Alert
C
C
Day
C
Month
C
Year
C
Minutes
E-6
E-7
3. When the setting you want to change is flashing, use D and B to change it as
described below.
Screen
To do this:
Do this:
Reset the seconds to
Toggle between Daylight Saving Time
(
) and Standard Time (
)
Press D.
Daylight Saving Time (DST)
Specify the UTC offset
Change the hour or minutes
Change the year
x When DST is turned on, the UTC offset setting range is –11.0 to +15.0, in
0.5-hour units.
x For information about Flash Alert, see “Flash Alert” (page E-32).
4. Press A to exit the setting screen.
x The day of the week is displayed automatically in accordance with the date (year,
month, and day) settings.
Use D (+) and B (–).
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
Change the month or day
x For details about the UTC offset, see the “City Code Table” at the back of this
manual.
x See “Daylight Saving Time (DST)” on page E-9 for details about DST setting.
x The UTC offset setting range is –12.0 to +14.0, in 0.5-hour units.
E-8
E-9
Operation Guide 3297
To toggle the Timekeeping Mode time between DST and Standard Time
1. In the Timekeeping Mode, hold down A until the
DST indicator
seconds start to flash, which indicates the setting
screen.
2. Press C to display the DST setting screen.
3. Press D to toggle between Daylight Saving Time (
displayed) and Standard Time (
displayed).
4. Press A to exit the setting screen.
x The DST indicator appears on the display to indicate that
Daylight Saving Time is turned on.
To toggle between 12-hour and 24-hour timekeeping
In the Timekeeping Mode, press D to toggle between 12-hour timekeeping and
24-hour timekeeping.
x With the 12-hour format, the P (PM) indicator appears to the left of the hour digits for
times in the range of noon to 11:59 p.m. and no indicator appears to the left of the
hour digits for times in the range of midnight to 11:59 a.m.
x With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
any indicator.
x The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
applied in all other modes.
E-10
E-11
World Time
City code
Current time and date in
the zone of the selected
city code
World Time shows the current time in 48 cities (29 time
zones) around the world.
x All of the operations in this section are performed in
the World Time Mode, which you enter by pressing C
(page E-4).
To view the time for another city code
In the World Time Mode, press D to scroll eastwardly
through city codes or B to scroll westwardly.
x For full information about city codes, see the “City Code
Table” at the back of this manual.
x If the current time for a city is wrong, check your
Timekeeping Mode time and the UTC offset settings and
make necessary changes.
To toggle a city code time between Standard Time and Daylight Saving Time
1. In the World Time Mode, use D and B to display the
DST indicator
city code (time zone) whose Standard Time/Daylight
Saving Time setting you want to change.
2. Hold down A for about one second to toggle Daylight
Saving Time (DST indicator displayed) and Standard
Time (DST indicator not displayed).
x The DST indicator is on the display whenever you display
a city code for which Daylight Saving Time is turned on.
x Note that the DST/Standard Time setting affects only
the currently displayed city code. Other city codes are
not affected.
E-12
E-13
To measure times with the stopwatch
Stopwatch
1/100 second
Hours
Seconds
Minutes
The stopwatch lets you measure elapsed time, split times,
and two finishes. It also includes Auto-Start.
x The display range of the stopwatch is 23 hours,
59 minutes, 59.99 seconds.
x The stopwatch continues to run, restarting from zero after
it reaches its limit, until you stop it.
x The stopwatch measurement operation continues even if
you exit the Stopwatch Mode.
x Exiting the Stopwatch Mode while a split time is frozen
on the display clears the split time and returns to elapsed
time measurement.
x All of the operations in this section are performed in the
Stopwatch Mode, which you enter by pressing C (page
E-5).
Elapsed time
D
D
Start
D
Stop
Re-start
D
Stop
Clear
Split time
D
B
Start
B
Split
(SPL displayed)
Split release
D
Stop
B
Clear
Two Finishes
D
B
Start
D
Split
First runner
finishes.
Display time of
first runner.
Stop
Second runner
finishes.
B
Split release
Display time of
second runner.
E-14
B
Clear
E-15
About Auto-Start
Countdown Timer
With Auto-Start, the watch performs a 5-second countdown, and stopwatch operation
starts automatically when the countdown reaches zero.
During the final three seconds of the countdown, a beeper sounds with each second.
The countdown timer can be set within a range of one
minute to 24 hours. An alarm sounds when the countdown
reaches zero. The countdown timer also has an autorepeat feature and a progress beeper that signals the
progress of the countdown.
x All of the operations in this section are performed in the
Countdown Timer Mode, which you enter by pressing C
(page E-5).
To use Auto-Start
1. While the stopwatch screen is showing all zeros in the
Stopwatch Mode, press B.
x This displays a 5-second countdown screen.
x To return to the all zeros screen, press B again.
2. Press D to start the countdown.
x When the countdown reaches zero, a tone sounds and a
stopwatch timing operation starts automatically.
x Pressing D while the Auto-Start countdown is in
progress starts the stopwatch immediately.
E-16
Auto-repeat
When auto-repeat is turned on, the countdown restarts automatically from the
countdown start time when it reaches zero.
When auto-repeat is turned off, the countdown stops when it reaches zero and the
display shows the original countdown start time.
x Pressing D while an auto-repeat countdown is in progress pauses the current
countdown. You can resume the auto-repeat countdown by pressing D, or you can
press B to reset to the countdown time starting value.
Countdown Timer Beeper Operations
The watch beeps at various times during a countdown so you can keep informed
about the countdown status without looking at the display. The following describes the
types of beeper operations the watch performs during a countdown.
E-18
B
Configuring the Countdown Timer
Hours
Seconds
Minutes
The following are the settings you should configure before
actually using the countdown timer.
Countdown start time; Auto-repeat on/off; Progress beeper
on/off
x See “To configure the countdown timer” (page E-20) for
information about setting up the timer.
E-17
Countdown End Beeper
The countdown end beeper lets you know when the countdown reaches zero.
x When the progress beeper is turned off, the countdown end beeper sounds for
about 10 seconds, or until you press any button to stop it.
x When the progress beeper is turned on, the countdown end beeper sounds for
about one second.
Progress Beeper
When the progress beeper is turned on, the watch uses beeps to signal countdown
progress as described below.
x Starting from five minutes before the end of the countdown, the watch emits four
short beeps at the top of each countdown minute.
x 30 seconds before the end of the countdown, the watch emits four short beeps.
x The watch emits a short beep for each of the last 10 seconds of the countdown.
x If the countdown start time is six minutes or greater, the watch emits a short beep
for each second of the final 10 seconds before the five-minute point is reached. Four
short beeps are emitted to signal when the five-minute point is reached.
E-19
Operation Guide 3297
To configure the countdown timer
1. While the countdown start time is on the display in the
Countdown Timer Mode, hold down A until the current
countdown start time starts to flash, which indicates the
setting screen.
x If the countdown start time is not displayed, use the
procedure under “To use the countdown timer” (page
E-22) to display it.
2. Press C to move the flashing in the sequence shown
below to select other settings.
C
Hours
Minutes
C
C
Progress Beeper
3. When the setting you want to change is flashing, use D and B to change it as
described below.
Setting
Screen
Button Operation
Hours, Minutes
Use D (+) and B (–) to change the setting.
Auto-repeat
Press D to toggle auto-repeat on (
and off (
displayed).
Progress Beeper
Press D to toggle the progress beeper on (
off (
).
displayed)
) and
x To specify a countdown start time of 24 hours, set
.
4. Press A to exit the setting screen.
x You can also perform steps 1 and 2 of the above procedure whenever you need to
view the current auto-repeat and progress beeper settings.
Auto-repeat
C
E-20
E-21
To use the countdown timer
Press D while in the Countdown Timer Mode to start the
countdown timer.
x The countdown timer operation continues even if you exit
the Countdown Timer Mode.
x Press D while a countdown operation is in progress to
pause it. Press D again to resume the countdown.
x To stop a countdown operation completely, first pause
it (by pressing D), and then press B. This returns the
countdown time to its starting value.
Alarms
Alarm number
Alarm date
(Month – Day)
You can set up to three independent multi-function
alarms with hour, minutes, month, and day. When an
alarm is turned on, the alarm tone sounds when the
alarm time is reached. One of the alarms is a snooze
alarm, while the other two are one-time alarms.
You can also turn on an Hourly Time Signal that causes
the watch to beep twice every hour on the hour.
x There are three alarm screens numbered AL1 and
AL2 for the one-time alarm, a snooze alarm screen
indicated by SNZ. The Hourly Time Signal screen is
indicated by SIG.
x All of the operations in this section are performed in
the Alarm Mode, which you enter by pressing C (page
E-5).
Alarm time
(Hour : Minutes)
E-22
E-23
To set an alarm time
Alarm Types
The alarm type is determined by the settings you make, as described below.
x Daily alarm
Set the hour and minutes for the alarm time. This type of setting causes the alarm to
sound everyday at the time you set.
x Date alarm
Set the month, day, hour and minutes for the alarm time. This type of setting causes
the alarm to sound at the specific time, on the specific date you set.
x 1-Month alarm
Set the month, hour and minutes for the alarm time. This type of setting causes the
alarm to sound everyday at the time you set, only during the month you set.
x Monthly alarm
Set the day, hour and minutes for the alarm time. This type of setting causes the
alarm to sound every month at the time you set, on the day you set.
1. In the Alarm Mode, use D and B to scroll through the
alarm screens until the one whose time you want to set
is displayed.
D
D
B
B
B
B
D
D
x To set a one-time alarm, display an alarm screen AL1or AL2. To set the
snooze alarm, display the SNZ screen.
x The snooze alarm repeats every five minutes.
2. After you select an alarm, hold down A until the hour setting of the alarm time
starts to flash, which indicates the setting screen.
x This operation turns on the alarm automatically.
E-24
E-25
3. Press C to move the flashing in the sequence shown below to select other
settings.
C
C
C
Hour
Minutes
Month
Day
C
4. While a setting is flashing, use D and B to change it as described below.
Screen
To do this:
Change the hour and
minutes
Change the month and day
Do this:
Use D (+) and B (–).
x With the 12-hour format, set the time correctly
as a.m. or p.m. (P indicator).
x To set an alarm that does not include a month
and/or day, set for each setting.
Alarm Operation
The alarm tone sounds at the preset time for 10 seconds, regardless of the mode the
watch is in. In the case of the snooze alarm, the alarm operation is performed a total
of seven times, every five minutes, until you turn the alarm off (page E-28).
x Alarm and Hourly Time Signal operations are performed in accordance with the
Timekeeping Mode time.
x To stop the alarm tone after it starts to sound, press any button.
x Performing any one of the following operations during a 5-minute interval between
snooze alarms cancels the current snooze alarm operation.
Displaying the Timekeeping Mode setting screen (page E-7)
Displaying the SNZ setting screen (page E-25)
To test the alarm
In the Alarm Mode, hold down D to sound the alarm.
5. Press A to exit the setting screen.
E-26
To turn an alarm on and off
1. In the Alarm Mode, use D and B to select an alarm.
Alarm on indicator 2. Press A to toggle it on and off.
x Turning on an alarm (AL1, AL2, or SNZ) displays the
Snooze alarm
indicator
alarm on indicator on its Alarm Mode screen.
x Turning on the snooze alarm (SNZ) displays the alarm
on indicator and snooze alarm indicator on the Alarm
Mode snooze alarm screen.
x In all modes, the alarm on indicator is shown for any
alarm that is currently turned on.
x The alarm on indicator flashes while the alarm is
sounding.
x The snooze alarm indicator flashes while the snooze
alarm is sounding and during the 5-minute intervals
between alarms.
E-28
E-27
To turn the Hourly Time Signal on and off
1. In the Alarm Mode, use D to select the Hourly Time
Hourly Time Signal on
Signal (SIG).
indicator
2. Press A to toggle it on and off.
x The Hourly Time Signal on indicator is shown on the
display in all modes while this function is turned on.
E-29
Operation Guide 3297
Illumination
Reference
This watch has an EL (electro-luminescent) panel that causes the entire display to
glow for easy reading in the dark.
This section contains more detailed and technical information about watch operation.
It also contains important precautions and notes about the various features and
functions of this watch.
To illuminate the display
In any mode, press L to turn on illumination.
x You can use the procedure below to select either 1.5 seconds or 3 seconds as the
illumination duration. When you press L, the illumination will remain on for about
1.5 seconds or 3 seconds, depending on the current illumination duration setting.
Graphic Area
The information shown in the graphic area depends on the current mode.
Graphic area
Mode
Timekeeping
To specify the illumination duration
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. While the seconds are flashing, press B to toggle the
setting between 1.5 seconds ( ) and 3 seconds ( ).
3. Press A to exit the setting screen.
Graphic Area
Timekeeping Mode seconds
World Time
Timekeeping Mode seconds
Stopwatch
Stopwatch time seconds
Countdown Timer
Countdown time seconds
Alarm
No indication
E-30
E-31
Flash Alert
Button Operation Tone
When Flash Alert is turned on, the illumination flashes for
the alarms, the Hourly Time Signal, the countdown alarm,
and stopwatch auto start.
Mute indicator
To turn Flash Alert on and off
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. Press C eight times to display the Flash Alert setting
screen.
3. Press D to toggle Flash Alert on (
displayed) and off (
displayed).
4. Press A to exit the setting screen.
x The Flash Alert setting you select with the above procedure is applied in all modes.
x When Flash Alert is on,
appears on the timekeeping screen for about one
second whenever you enter the Stopwatch, Countdown Timer, or Alarm Mode.
The button operation tone sounds any time you press one
of the watch’s buttons. You can turn the button operation
tone on or off as desired.
x Even if you turn off the button operation tone, the alarms,
the Hourly Time Signal, the countdown alarm, and
stopwatch auto start all operate normally.
To turn the button operation tone on and off
In any mode (except when a setting screen is on the
display), hold down C to toggle the button operation tone
on (mute indicator not displayed) and off (mute indicator
displayed).
x Holding down C to turn the button operation tone on or off also causes the watch’s
current mode to change.
x The mute indicator is displayed in all modes when the button operation tone is
turned off.
E-32
Auto Return Features
x If you leave the watch in the Alarm Mode for two or three minutes without performing
any operation, it automatically changes to the Timekeeping Mode.
x If you leave a screen with flashing digits on the display for two or three minutes
without performing any operation, the watch automatically exits the setting screen.
Scrolling
The B and D buttons are used in various modes and setting screens to scroll
through data on the display. In most cases, holding down these buttons during a scroll
operation scrolls at high speed.
Initial Screens
When you enter the World Time or Alarm Mode, the data you were viewing when you
last exited the mode appears first.
E-33
Timekeeping
x Resetting the seconds to while the current count is in the range of 30 to 59
causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are
reset to without changing the minutes.
x The year can be set in the range of 2000 to 2099.
x The watch’s built-in full automatic calendar makes allowances for different month
lengths and leap years. Once you set the date, there should be no reason to change
it except after you have the watch’s battery replaced.
World Time
All World Time Mode times are calculated from the current time in the Timekeeping
Mode using UTC offset values.
x The seconds count of the World Time is synchronized with the seconds count of the
Timekeeping Mode.
x The UTC offset is a value that indicates the time difference between a reference
point in Greenwich, England and the time zone where a city is located.
E-34
x The letters “UTC” is the abbreviation for “Coordinated Universal Time”, which is the
world-wide scientific standard of timekeeping. It is based upon carefully maintained
atomic (cesium) clocks that keep time accurately to within microseconds. Leap
seconds are added or subtracted as necessary to keep UTC in sync with the Earth’s
rotation.
Illumination Precautions
x Illumination may be hard to see when viewed under direct sunlight.
x Illumination turns off automatically whenever an alarm sounds.
x Frequent use of illumination runs down the battery.
E-35
Specifications
Accuracy at normal temperature: ±30 seconds a month
Timekeeping: Hour, minutes, seconds, p.m. (P), month, day, day of the week
Time format: 12-hour and 24-hour
Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099
Other: UTC Offset; Daylight Saving Time (summer time)/Standard Time
World Time: 48 cities (29 time zones)
Other: Daylight Saving Time/Standard Time
Alarms: 3 multi-function* alarms (two one-time alarms; one snooze alarm);
Hourly Time Signal
* Alarm type: Daily alarm, date alarm, 1-month alarm, monthly alarm
Countdown Timer
Measuring unit: 1 second
Input range: 1 minute to 24 hours (1-minute increments and 1-hour increments)
Other: Auto-repeat timing; Progress beeper
E-36
Stopwatch
Measuring unit: 1/100 second
Measuring capacity: 23:59' 59.99"
Measuring modes: Elapsed time, split time, two finishes
Illumination: EL (electro-luminescent panel); Selectable illumination duration
Other: Button operation tone on/off, Flash Alert
Battery: One lithium battery (Type: CR2016)
Approximately 5 years on type CR2016 (10 seconds of alarm operation per day
(with Flash Alert), one countdown timer operation (with progress beeper and Flash
Alert) per week, one stopwatch operation (with auto start and Flash Alert) per week,
1.5 seconds of illumination per day)
E-38
E-37
City Code Table
L-1
Operation Guide 3297
City Code Table
City
Code
PPG
HNL
ANC
YVR
SFO
LAX
DEN
MEX
CHI
MIA
NYC
CCS*
YYT
RIO
RAI
L-2
City
Pago Pago
Honolulu
Anchorage
Vancouver
San Francisco
Los Angeles
Denver
Mexico City
Chicago
Miami
New York
Caracas
St. Johns
Rio De Janeiro
Praia
UTC Offset/
GMT Differential
–11
–10
–9
–8
–7
–6
–5
–4
–3.5
–3
–1
City
Code
LIS
LON
BCN
PAR
MIL
ROM
BER
ATH
JNB
IST
CAI
JRS
MOW
JED
THR
City
Lisbon
London
Barcelona
Paris
Milan
Rome
Berlin
Athens
Johannesburg
Istanbul
Cairo
Jerusalem
Moscow
Jeddah
Tehran
UTC Offset/
GMT Differential
0
+1
+2
+3
+3.5
City
Code
DXB
KBL
KHI
MLE
DEL
DAC
RGN
BKK
SIN
HKG
BJS
SEL
TYO
ADL
City
Dubai
Kabul
Karachi
Male
Delhi
Dhaka
Yangon
Bangkok
Singapore
Hong Kong
Beijing
Seoul
Tokyo
Adelaide
UTC Offset/
GMT Differential
+4
+4.5
+5
+5.5
+6
+6.5
+7
+8
+9
+9.5
City
Code
GUM
SYD
NOU
WLG
City
UTC Offset/
GMT Differential
Guam
Sydney
Noumea
Wellington
+11
+12
+10
x Based on data as of December 2010.
x The rules governing global times
(UTC offset and GMT differential) and
summer time are determined by each
individual country.
* In December 2007, Venezuela
changed its offset from –4 to –4.5.
Note, however, that this watch displays
an offset of –4 (the old offset) for the
CCS (Caracas, Venezuela) city code.
L-3
Download PDF

advertising