Casio EX-Z800BE Digital Camera User Manual

COMPACT COMPONENT SYSTEM
SISTEMAS DE COMPONENTES COMPACTOS
SISTEMA DE COMPONENTE COMPACTO
MX-J111V
Consists of CA-MXJ111V and SP-MXJ111V
Consta del CA-MXJ111V el SP-MXJ111V
Consta do CA-MXJ111V e SP-MXJ111V
CA-MXJ111V SP-MXJ111V
CA-MXJ111V SP-MXJ111V
PlayBack
Control
VIDEO CD
REPEAT
RANDOM
COMPACT
DIGITAL VIDEO
NTSC/PAL
/PAL AUTO
PLAY & EXCHANGER
VOLUME
STANDBY
SOUND
MODE
ECHO
ACTIVE
BASS EX.
MPX/V.REPLACE
/V.MASKING
PHONES
NTSC/PAL COMPATIBILITY
VIDEO CD
CD
FM/AM
MIC LEVEL
TUNING
UP
RM-SMXJ111V REMOTE CONTROL
CLOCK
1
TIMER
2
5
ECHO
MAX
MIC
V.INTRO
SLEEP
TUNING
DOWN
6
SET
7
MIN
3
– SELECT +
4
ON SCREEN
8
SELECT
TAPE
DUBBING
AUX
DECK A/B
VCD
NUMBER
PREV
NEXT
P.DOWN
REV. MODE
REC
START/STOP
CD REC START
P.UP
HIGHLIGHT
9
PLAY MODE
+10
10
CD1
CD2
PREV
NEXT
CD3
STILL
CD
RETURN
SELECT
TAPE
REC PAUSE
SHIFT
A – TAPE - B
FM MODE
FM/AM
AUX
PLAY
REC/PLAY
i
SOUND
MODE
VOLUME
KEY
CONTROL
I
AUTO REVERSE
EJECT
SP-MXJ111V
AUTO REVERSE
EJECT
CA-MXJ111V
SP-MXJ111V
INSTRUCTIONS
MANUAL DE INSTRUCCIONES
INSTRUÇÕES
For Customer Use:
Enter below the Model No. and Serial
No. which are located either on the rear,
bottom or side of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
LVT0372-001A
[ U, UB, US, UT, UX ]
Cover-1 MX-J111V[U]/f
1
99.9.6, 1:53 PM
Warnings, Cautions and Others
Avisos, precauciones y otras notas
Advertências, precauções e outras notas
Caution ––
switch!
Disconnect the mains plug to shut the power off completely. The
switch in any position does not disconnect the mains line. The power can be remote controlled.
!
Precaución –– Interruptor
Desconectar el cable de alimentación para desactivar la
alimentación totalmente. Cualquier que sea la posición de
ajuste del interruptor
, la alimentación no es cortada
completamente. La alimentación puede ser controlada
remotamente.
Precaução –– Interruptor
!
Desconectar o cabo de alimentação para desligar a
alimentação por completo. Qualquer que seja a posição
de ajuste do interruptor
, a alimentação não é
completamente cortada. A alimentação pode ser
controlada remotamente.
– G-1 –
SAFETY-MX-J111V[U]/f
1
99.7.30, 9:44 PM
CAUTION
To reduce the risk of electrical shocks, fire, etc.:
1. Do not remove screws, covers or cabinet.
2. Do not expose this appliance to rain or moisture.
PRECAUCIÓN
Para reducir riesgos de choques eléctricos, incendio,
etc.:
1. No extraiga los tornillos, los cubiertas ni la caja.
2. No exponga este aparato a la lluvia o a la
humedad.
PRECAUÇÃO
Para reduzir riscos de choques elétricos, incêndio, etc.:
1. Não remova parafusos e tampas ou desmonte a
caixa.
2. Não exponha este aparelho à chuva nem à
umidade.
– G-2 –
SAFETY-MX-J111V[U]/f
2
99.7.30, 9:44 PM
Caution: Proper Ventilation
To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:
1 Front:
No obstructions and open spacing.
2 Sides/ Top/ Back: No obstructions should be placed in the areas shown by the dimensions below.
3 Bottom:
Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand
with a height of 10 cm or more.
Precaución: el aparato debe estar bien ventilado
Para evitar posibles riesgos de descargas eléctricas e incendios y prevenir cualquier posible daño, coloque el
aparato del modo siguiente:
1 Parte delantera: No ponga nada delante, deje el espacio libre.
2 Laterales/ parte superior/ parte trasera: No se debería colocar nada en las áreas y las distancias que se detallan
a continuación.
3 Parte inferior:
Coloque el aparato sobre una superficie recta. Debe haber buena circulación de aire; para
ello, coloque el aparato sobre una base a una altura mínima de 10 cm.
Precaução: Ventilação adequada
Para evitar riscos de choques elétricos e incêndios, e prevenir avarias, instale o aparelho como segue:
1 Parte frontal:
Sem obstruções e espaços abertos.
2 Partes laterais/Tampa/Posterior: Nenhuma obstrução deverá ser colocada entre as áreas cujas dimensões são
indicadas abaixo.
3 Parte inferior:
Instale-o sobre uma superfície plana. Deverá ser mantido espaço suficiente para a ventilação
se este for instalado numa posição que tenha uma altura de 10 cm ou mais.
1 cm
15 cm
15 cm
15 cm
15 cm
1 cm
15 cm
1 cm
15 cm
15 cm
15 cm
15 cm
1 cm
15 cm
CA-D3S
CA-MXJ111V
CA-D3S
CA-MXJ111V
10 cm
10 cm
– G-3 –
SAFETY-MX-J111V[U]/f
3
99.7.30, 9:44 PM
IMPORTANT FOR LASER PRODUCTS / IMPORTANTE PARA PRODUCTOS LÁSER / IMPOTANTE
PARA PRODUTOS LASER /
/
REPRODUCTION OF LABELS / REPRODUCCIÓN DE ETIQUETAS / REPRODUÇÃO DE ETIQUETAS
/
1 CLASSIFICATION LABEL, PLACED ON REAR ENCLOSURE
2 WARNING LABEL, PLACED INSIDE THE UNIT
1 ETIQUETA DE CLASIFICACIÓN, PEGADA EN LA PARTE
POSTERIOR DE LA CAJA
2 ETIQUETA DE ADVERTENCIA, PEGADA EN EL INTERIOR DE LA UNIDAD
1 ETIQUETA DE CLASSIFICAÇÃO LOCALIZADA NA PARTE
POSTERIOR DA CAIXA DO APARELHO.
2 ETIQUETA DE ADVERTÊNCIA LOCALIZADA NA PARTE
INTERNA DA UNIDADE.
CLASS
LASER
DANGER: Invisible laser
radiation when open and
interlock failed or defeated.
AVOID DIRECT EXPOSURE
TO BEAM.
(e)
1
PRODUCT
VARNING: Osynlig laserstrålning när denna del är
öppnad och spärren är
urkopplad. Betrakta ej
strålen.
(s)
1. CLASS 1 LASER PRODUCT
2. DANGER: Invisible laser radiation when open and interlock
failed or defeated. Avoid direct exposure to beam.
3. CAUTION: Do not open the top cover. There are no user
serviceable parts inside the Unit; leave all servicing to qualified service personnel.
1. PRODUCTO LÁSER CLASE 1
2. PELIGRO: En el interior hay radiación láser invisible. Evite el
contacto directo con el haz.
3. PRECAUCIÓN: No abra la tapa superior. En el interior de la
unidad no existen piezas reparables por el usuario; deje todo
servicio técnico en manos de personal calificado.
1. PRODUTO LASER CLASSE 1
2. PERIGO: O laser emite uma rediação invisível que é perigosa,
caso o aparelho esteja aberto e a trava inoperante ou
danificada. Evite exposição direta ao feixe dos raios.
3. CUIDADO: Não abra a caixa do aparelho. Não existem
peças reparáveis pelo usuário na parte interna da unidade.
Solicite assistência técnica somente a pessoal técnico
qualificado.
– G-4 –
SAFETY-MX-J111V[U]/f
4
99.7.30, 9:45 PM
ADVARSEL: Usynlig laserstråling ved åbning, når
sikkerhedsafbrydere er ude
af funktion. Undgå udsættelse for stråling
(d)
VARO: Avattaessa ja suojalukitus ohitettaessa olet
alttiina näkymättömälle
lasersäteilylle. Älä katso
säteeseen.
(f)
English
Thank you for purchasing the JVC Compact Component System.
We hope it will be a valued addition to your home, giving you years of enjoyment.
Be sure to read this instruction manual carefully before operating your new stereo system.
Here you will find all the information you need to set up and use the System.
For questions that are not be answered in the manual, please contact your dealer.
Features
Easy Operation
Great Sound
Triple Tray
Video CD and CD-G
Sing Along
Here are some of the things that make your System powerful and easy to use.
o The controls and operations have been redesigned to make them very easy to use, so you can spend
your time listening to music.
• With the One Touch Operation feature of JVC’s COMPU PLAY you can turn on the System and
start the radio, the Cassette Deck, or the CD Player with a single touch.
o To get such great sound from such a compact package the System has:
• Programmed sound mode includes live surround effects D. CLUB, HALL, and STADIUM. It also
includes S.E.A (Sound Effect Amplifier) effects ROCK, CLASSIC, and POP.
o CD changer function can operate 3 discs.
• Discs can be changed during play using the TRIPLE TRAY.
• Random or program play of 3 discs.
Includes a timer for recording broadcasts while you are out, and an easy-to-use Sleep Timer.
You can play Video CDs either with or without the PBC function as well as CD-Gs.
• When you play Video CDs with PBC function, you can enjoy MENU PLAY and HIGHRESOLUTION STILL PICTURES.
You can use conventional tapes and CDs for KARAOKE with the voice masking function. With an
optional microphone, you can replace the lead singer’s voice on your favorite songs with your own.
• DIGITAL ECHO applied to your voice through the microphone gives you a professional sound.
• You can adjust the key of the source by KEY CONTROL if it's not suite on you.
How This Manual Is Organized
In this manual we have incorporated some special features:
• Basic information that is the same for many different functions is grouped in one place, and not
repeated in each procedure. For instance, in the section on playing a CD, we do not repeat the
information about setting the volume and the sound conditions, which are discussed in the Common
Operations section.
• Names of buttons and controls are written in all capital letters like this: SOUND MODE.
• When we are talking about the Function, rather than the BUTTON or DISPLAY, only the first letter is
capitalized.
The manual has a table of contents to help you quickly look up what you want to know.
We’ve enjoyed making this manual for you, and hope you will use it to enjoy the sound and many features
built into your System.
IMPORTANT CAUTIONS
1. Installation of the Unit
•
•
•
Select a place which is level, dry and neither too hot nor too cold. (Between 5°C and 35°C.)
Leave sufficient distance between the Unit and a TV.
Do not use the Unit in a place subject to vibrations.
2. Power cord
•
•
•
Do not handle the power cord with wet hands!
Some power (12 watts) is always consumed as long as the power cord is connected to the wall
outlet.
When unplugging the Unit from the wall outlet, always pull the plug, not the power cord.
3. Malfunctions, etc.
•
•
There are no user serviceable parts inside. If anything goes wrong, unplug the power cord and
consult your dealer.
Do not insert any metallic object into the Unit.
1
EN.01-36.MX-J111V[U]/f
1
99.9.17, 3:57 PM
Getting Started ................................................ 3
Accessories ................................................................ 3
Set the VOLTAGE SELECTOR Switch .................... 3
How to Put Batteries in the Remote Control ............. 3
Using the Remote Control ......................................... 3
Connecting the FM Antenna ...................................... 4
Connecting the AM Antenna ..................................... 4
Connecting the Speakers ........................................... 5
Connecting Auxiliary Equipment .............................. 5
Connecting Video Output .......................................... 6
Setting Video Output ................................................. 6
COMPU PLAY .......................................................... 7
Common Operations....................................... 8
Turning the Power On and Off .................................. 8
Turning the System On ......................................... 8
Turning the System Off ........................................ 8
Adjusting the Volume ................................................ 9
Reinforcing the Bass Sound ...................................... 9
Sound Modes ............................................................. 9
Listening to Auxiliary Equipment ........................... 10
Using the Tuner ............................................. 11
Setting the AM Tuner Interval Spacing .............. 11
One Touch Radio ................................................ 11
Tuning in a Station................................................... 12
Switching between Frequency Bands ................. 12
Three ways to select a station ............................. 12
Presetting Stations ................................................... 12
Changing the FM Reception Mode ......................... 12
Using the CD Player ...................................... 13
The Quickest Way to Start a CD Is with the
One Touch Operation ...................................... 14
Inserting Discs ......................................................... 14
Basics of Using the CD Player — Normal Play ...... 15
Playing a Disc ..................................................... 15
Selecting a Disc, Track or Passage
within a Track ................................................. 15
Locating a Track with the Remote Control
Directly ........................................................... 15
Changing Discs while Playing ........................... 15
Programming the Playing Order of the Tracks ........ 16
Random Play ........................................................... 17
Repeating a Selection or the Discs .......................... 17
Tray Lock Function ................................................. 18
Locking the Electronic Lock .............................. 18
Unlocking the Electronic Lock........................... 18
Playing Video CDs and CD-Gs ............................... 19
English
Table of Contents
Special Plays for Video CDs .................................... 19
Frame-by-Frame Playback ................................. 19
Viewing Operation Status ................................... 19
Viewing the Video Intro of a Video CD.............. 20
Viewing the Highlights of a Video CD ............... 20
Playing Video CDs with PBC Function................... 21
Playing Video CDs with Using Menu Screen .... 21
Playing Video CDs without Using
Menu Screen .................................................. 22
Using the Cassette Deck
(Listening to a Tape) ................................. 23
One Touch Play .................................................. 23
Regular Play ............................................................ 23
Fast Left and Fast Right ..................................... 24
Music Scan .............................................................. 24
Finding the Beginning of the Current Selection .... 24
Finding the Beginning of the Next Selection ........ 24
Reverse Mode .......................................................... 24
Using the Cassette Deck (Recording) ......... 25
Things to Know Before You Start Recording ..... 25
Standard Recording ................................................. 26
Recording Any Sound Source to Tape ................ 26
CD Direct Recording ............................................... 27
Tape to Tape Recording (Dubbing) ......................... 27
How to Use the DUBBING Button .................... 27
Using the Timer ............................................. 28
Setting the Clock ..................................................... 28
Setting the Timer ..................................................... 29
Setting the Sleep Timer ........................................... 30
Using the Microphone .................................. 31
Playing the Microphone Sound through
the Speakers ........................................................ 31
Microphone Mixing ................................................. 32
Applying Echo to Your Vocal .................................. 32
Singing Along with Conventional Audio CDs
or Tapes — Vocal Masking ................................. 32
Singing Along with Multiplex Karaoke Discs
or Tapes............................................................... 33
Adjusting Key Control ............................................. 33
Care and Maintenance .................................. 34
Troubleshooting ............................................ 35
Specifications ................................................ 36
2
EN.01-36.MX-J111V[U]/f
2
99.9.17, 3:57 PM
English
Getting Started
Accessories
Check that you have all of the following items, which are supplied with the System.
AM Loop Antenna (1)
Remote Control (1)
Batteries (2)
FM Wire Antenna (1)
Video Cord (1)
AC Plug Adaptor (except for Argentina) (1)
If any of these items is missing, contact your dealer immediately.
Set the VOLTAGE SELECTOR Switch
LINE VOLTS
220V
110V
230V
-240V
127V
To avoid damaging the System, set the voltage before plugging in the Unit.
o Set the correct voltage for your area with the VOLTAGE SELECTOR switch on the back panel of the
System. Use a screwdriver to rotate the selector so the number the dot mark is pointed at is the same
as the voltage.
How to Put Batteries in the Remote
Control
Match the polarity (+ and –) on the batteries with the + and – markings in the battery compartment.
R6S/R6P (SUM-3)/AA (15F)
CAUTION: Handle batteries properly.
To avoid battery leakage or explosion:
• Remove batteries when the Remote Control will not be used for a long time.
• When you need to replace the batteries, replace both batteries at the same time with new ones.
• Don’t use an old battery with a new one.
• Don’t use different types of batteries together.
Using the Remote Control
The Remote Control makes it easy to use many of the functions of the System from a distance of up to 7m
(23 feet) away.
You need to point the Remote Control at the remote sensor on the System’s front panel.
REPEAT
RANDOM
COMPACT
DIGITAL VIDEO
NTSC/PAL
/PAL AUTO
PLAY & EXCHANGER
VOLUME
STANDBY
SOUND
MODE
ECHO
Remote sensor
ACTIVE
BASS EX.
MPX/V.REPLACE
/V.MASKING
PHONES
NTSC/PAL COMPATIBILITY
VIDEO CD
CD
FM/AM
MIC LEVEL
TUNING
UP
MIN
MAX
MIC
TUNING
DOWN
SELECT
TAPE
DUBBING
AUX
DECK A/B
VCD
NUMBER
PREV
NEXT
P.DOWN
REV. MODE
REC
START/STOP
CD REC START
P.UP
PLAY
REC/PLAY
AUTO REVERSE
EJECT
AUTO REVERSE
EJECT
3
EN.01-36.MX-J111V[U]/f
3
99.9.17, 3:57 PM
English
CAUTION: Make all connections before plugging the Unit into an AC power outlet.
Connecting the FM Antenna
Using the Supplied Wire Antenna
FM Wire Antenna
ANTENNA
FM
Extend the supplied FM Wire Antenna
horizontally.
FM
75
GND
AM
EXT
GND
AM LOOP
Using an FM 75 Ohm Antenna Wire (not supplied)
If reception is poor, connect the outside antenna.
ANTENNA
FM
Outside FM Antenna Wire
FM
75
GND
AM
EXT
GND
AM LOOP
20 mm
1
10 mm
3
2
4
Before attaching a 75 ohm coaxial lead (the kind with a round wire going to an outside antenna),
disconnect the supplied FM Wire Antenna.
CAUTION: To avoid noise, keep antennas away from metallic parts of the System, connecting
cord and the AC power cord.
Connecting the AM Antenna
AM Antenna Wire (not supplied)
If reception is poor, connect the outside antenna.
ANTENNA
FM
FM
75
GND
AM
EXT
GND
Note: Even when connecting
an outside AM antenna, keep
the indoor AM loop connected.
AM LOOP
AM Loop Antenna
Turn the loop until you
have the best reception.
Snap the tabs on the loop
into the slots of the base
to attach the AM Loop.
4
EN.01-36.MX-J111V[U]/f
4
99.9.17, 3:57 PM
English
CAUTION: Make all connections before plugging the Unit into an AC power outlet.
Connecting the Speakers
For each speaker, connect one end of the speaker wire to the speaker terminals on the back of the System.
1. Open each of the terminals and insert the speaker wires firmly, then close the terminals.
2. Connect the red (+) and black (–) terminals of the right side speaker to the red (+) and black (–)
terminals marked RIGHT on the System.
Connect the red (+) and black (–) terminals of the left side speaker to the red (+) and black (–)
terminals marked LEFT on the System.
CAUTION:
SPEAKER IMPEDANCE
6 – 16 OHMS.
SPEAKERS
RIGHT
LEFT
+
+
–
–
SP-MXJ111V right
SP-MXJ111V left
IMPORTANT: Use speakers with the correct impedance only.
The correct impedance is indicated on the back panel.
Connecting Auxiliary Equipment
When you connect the Unit to TV
VIDEO
OUT
Video in
Connect TV to VIDEO OUT
To play back pictures on your TV.
When you connect the Unit to VCR and TV
Connect VCR or other equipment to AUX IN
To listen to this source, press the AUX button.
Audio out
AUX
IN
RIGHT
VIDEO
OUT
LEFT
LINE
OUT
Audio in
Video in
Connect VCR to LINE OUT and VIDEO OUT
Connect VCR to TV
so that you can view
the pictures on the
TV screen.
Video out
Video in
To record Video CDs and CD-Gs on the VCR, connect VIDEO
OUT and LINE OUT to VCR.
5
EN.01-36.MX-J111V[U]/f
Note: the LINE OUT jacks will transmit audio signals from the selected TAPE, CD or TUNER, to the connected equipment.
No audio signal comes out from the AUX IN jacks to the LINE OUT jacks.
5
99.9.17, 3:57 PM
English
CAUTION: Make all connections before plugging the Unit into an AC power outlet.
Connecting the Video Out
Using the Video Cord
To play back pictures correctly on the TV screen, set the video output correctly according to your TV
system before use.
Refer to “Setting Video Output” below.
VIDEO
OUT
Setting Video Output
Press the NTSC/PAL/PAL AUTO button on the Unit repeatedly until playback picture appears correctly
on the TV screen.
Each time you press the button, video output changes as follows:
NTSC/PAL
/PAL AUTO
= PAL = PAL AUTO = NTSC = (back to the beginning)
PAL .................... for a PAL exclusive TV.
PAL AUTO* ....... for a Multisystem TV.
NTSC ................. for an NTSC exclusive TV.
* PAL AUTO detects the formula of the disc (NTSC/PAL) automatically and views picture on the TV
screen correctly.
Notes:
•
•
•
If you change video output setting during playback, picture may get distorted. In this case, stop
playback and set video output setting correctly.
When you play an NTSC disc with PAL AUTO setting on a PAL exclusive TV, the picture may get
distorted. If this happens, set video output to PAL.
When you play an NTSC disc with PAL AUTO setting on a Multisystem TV, the picture may blinks
for a moment. This symptom is caused by the Unit detecting the formula of the disc, not by a
malfunction of the Unit.
Now you can plug the AC power cord into the wall outlet, and your System is
at your command!
6
EN.01-36.MX-J111V[U]/f
6
99.9.17, 3:57 PM
English
COMPU PLAY
COMPU PLAY is JVC’s feature that lets you control the most frequently used functions of the System
with a single touch.
One Touch Operation starts playing a CD, turns on the radio, plays a tape, etc. with a single press of the
play button for that function. What One Touch Operation does for you is to turn the power on, then start
the function you have specified. If the Unit is not ready, such as no CD or tape in place, the Unit still
powers on so you can insert a CD or tape.
How One Touch Operation works in each case is explained in the section dealing with that function.
The COMPU PLAY buttons are:
On the Unit
CD £/8 button
CD Player CD1 to CD3 buttons
CD Player Open/Close (0) buttons
FM/AM button
TAPE ™ £ button
AUX button
On the Remote Control
FM/AM button
AUX button
CD control 3 button
CD control CD1 to CD3 buttons
Deck control 2, 3 buttons
7
EN.01-36.MX-J111V[U]/f
7
99.9.17, 3:57 PM
English
Common Operations
REPEAT
RANDOM
COMPACT
DIGITAL VIDEO
NTSC/PAL
/PAL AUTO
PLAY & EXCHANGER
VOLUME
STANDBY indicator
SOUND MODE
STANDBY
SOUND
MODE
ECHO
button
ACTIVE
BASS EX.
MPX/V.REPLACE
/V.MASKING
ACTIVE BASS EX.
PHONES
NTSC/PAL COMPATIBILITY
PHONES
VOLUME
VIDEO CD
CD
FM/AM
MIC LEVEL
TUNING
UP
MIN
DUBBING
AUX
DECK A/B
VCD
NUMBER
MAX
MIC
SELECT
TAPE
TUNING
DOWN
PREV
NEXT
P.DOWN
REV. MODE
REC
START/STOP
AUX
CD REC START
P.UP
PLAY
REC/PLAY
AUTO REVERSE
EJECT
AUTO REVERSE
EJECT
RM-SMXJ111V REMOTE CONTROL
CLOCK
1
TIMER
2
4
5
ECHO
button
Display
SLEEP
V.INTRO
6
SET
7
ON SCREEN
3
– SELECT +
8
Source, Sound Mode Volume level, etc.
HIGHLIGHT
9
PLAY MODE
+10
10
CD1
CD2
CD3
STILL
CD
PREV
NEXT
RETURN
kHz
MHz
SELECT
TAPE
REC PAUSE
A – TAPE - B
A.BASS EX
SHIFT
FM MODE
FM/AM
AUX
RANDOM
ALL PRGM CLOCK
AUX
i
SOUND
MODE
VOLUME
SOUND
MODE
KEY
CONTROL
I
S.MODE
REC SLEEP MONO ST
VOLUME +, –
ACTIVE BASS EX. indicator
SOUND MODE indicator
When the System is being used, the display shows other items as well.
However, we have only shown the items described in this section.
Turning the Power On and Off
Turning the System On ——————————————————
Press the
button.
The display turns on and the STANDBY indicator goes out.
The System comes on ready to continue in the mode it was in when the power was last turned off.
o If the last thing you were doing was listening to a tape in Deck B, you are now ready to listen to a tape
again in Deck B, or you can change to another source.
o If you were listening to the Tuner last, the Tuner comes on playing the station it was last set to.
or
Turning the System Off ——————————————————
Press the
button again.
The STANDBY indicator lights up and the display is blank, except for the clock display.
o Some power (12 watts) is always consumed even though power is turned off (called Standby Mode).
o To switch off the Unit completely, unplug the AC power cord from the AC outlet. When you unplug
the AC power cord, the clock will be reset to 0:00 immediately, and preset Tuner stations will be
erased after a few days.
8
EN.01-36.MX-J111V[U]/f
8
99.9.17, 3:57 PM
English
Adjusting the Volume
VOLUME
Turn the VOLUME control clockwise to increase the volume or counterclockwise to decrease it.
Turning the VOLUME control quickly also adjusts the volume level quickly.
When using the Remote Control, press the VOLUME + button to increase the volume or press the
VOLUME – button to decrease it.
You can adjust the volume level between 0 and 50.
or
CAUTION: Volume cannot be adjusted while the System is in STANDBY
mode. DO NOT turn on the Unit and/or start playing any source without
setting the VOLUME control to 0; otherwise, the sudden blast of sound
can damage your hearing, speakers and/or headphones.
VOLUME
PHONES
For private listening
Connect a pair of headphones to the PHONES jack. No sound comes out of the speakers.
Be sure to turn down the volume before connecting or putting on headphones.
Reinforcing the Bass Sound
The richness and fullness of the bass sound is maintained regardless of how low you set the volume.
You can use this effect only for playback.
SOUND
MODE
To get the effect, press the ACTIVE BASS EX. (Active Bass Extension) button.
The frame around the “A.BASS EX” indicator lights up.
ACTIVE
BASS EX.
A.BASS EX
To cancel the effect, press the button again.
The frame around the “A.BASS EX” indicator goes out.
A.BASS EX
Sound Modes
The System has some preset sound effects that give you control of the way your music sounds, so you can
tailor it for your room and for the quality of the source. We can give you some idea of how each one
affects the music, but the only way to really tell is to try them yourself.
o The preset sound modes include modes using surround effects and modes using S.E.A. effects.
o Sound Mode effects cannot be recorded.
Surround effect modes
D. CLUB (Dance Club)
HALL
STADIUM
Increases resonance and bass.
Adds depth and brilliance to the sound, like in a concert hall.
Adds clarity and spreads the sound, like in an outdoor stadium.
S.E.A. effect modes
ROCK
CLASSIC
POP
SOUND
MODE
or
SOUND
MODE
ACTIVE
BASS EX.
Boosts low and high frequencies.
Set for wide and dynamic sound stereo systems.
Good for vocal music.
To get an effect, press the SOUND MODE button repeatedly until the Sound Mode you want appears
on the display. The frame around the “S.MODE” indicator lights up.
Each time you press the SOUND MODE button, the display changes
S.MODE
as shown below:
= D. CLUB = HALL = STADIUM = ROCK = CLASSIC = POP = FLAT = (back to the
beginning)
To cancel an effect, press the SOUND MODE button until “FLAT” appears
on the display. The frame around the “S.MODE” indicator goes out.
To recall the previous Sound Mode, press the SOUND MODE button again.
9
EN.01-36.MX-J111V[U]/f
9
99.9.17, 3:57 PM
S.MODE
By playing the sound from auxiliary equipment through the System, you can gain control over how the
music or program sounds. Once the connected equipment is playing through the System, you can apply
the sound effects.
o First make sure that the optional equipment is properly connected to AUX IN. (See page 5)
1. Set the VOLUME control to 0.
2. Press the AUX button.
CD
FM/AM
SELECT
TAPE
When System is in Standby mode, the Unit is automatically turned on and “AUX” appears on the
display.
AUX
or
AUX
3. Start playing the equipment.
4. Adjust the VOLUME control to the desired listening level.
5. Select a sound effect mode, if you wish.
To Cancel the Setting, change the source by starting any one of the System’s built-in sound sources,
such as the Tuner, the CD Player and the Cassette Deck.
10
EN.01-36.MX-J111V[U]/f
10
99.9.17, 3:57 PM
English
Listening to Auxiliary Equipment
English
Using the Tuner
REPEAT
RANDOM
COMPACT
DIGITAL VIDEO
NTSC/PAL
/PAL AUTO
PLAY & EXCHANGER
VOLUME
STANDBY
SOUND
MODE
ECHO
ACTIVE
BASS EX.
MPX/V.REPLACE
/V.MASKING
PHONES
NTSC/PAL COMPATIBILITY
FM/AM
VIDEO CD
CD
TUNING UP
FM/AM
MIC LEVEL
TUNING
UP
MIN
MAX
MIC
TUNING
DOWN
TUNING DOWN
SELECT
TAPE
DUBBING
AUX
DECK A/B
VCD
NUMBER
PREV
REV. MODE
NEXT
P.DOWN
REC
START/STOP
CD REC START
P.UP
¢ P. UP
P. DOWN 4
PLAY
REC/PLAY
AUTO REVERSE
Number keys
EJECT
AUTO REVERSE
EJECT
RM-SMXJ111V REMOTE CONTROL
CLOCK
1
TIMER
2
4
5
ECHO
7
8
+10
SLEEP
V.INTRO
6
SET
110
ON SCREEN
3
– SELECT +
HIGHLIGHT
9
Display
PLAY MODE
CD1
CD2
PREV
NEXT
CD3
STILL
CD
RETURN
Band display, Frequency display, Preset channel
SELECT
TAPE
REC PAUSE
SHIFT
A – TAPE - B
FM MODE
AUX
FM/AM
i
SOUND
MODE
VOLUME
kHz
MHz
FM/AM
KEY
CONTROL
I
FM MODE
A.BASS EX
RANDOM
ALL PRGM CLOCK
S.MODE
REC SLEEP MONO ST
When the System is being used, the display shows other items as well.
However, we have only shown the items described in this section.
You can listen to both FM and AM stations. Stations can be tuned in manually, automatically or from
preset memory storage.
o Before listening to the radio
• Check that both the FM and AM antennas are firmly connected. (See page 4.)
TUNING
UP
TUNING
DOWN
Setting the AM Tuner Interval Spacing ——————————
Some countries space AM stations 9 kHz apart, and some countries use 10 kHz spacing. Europe, the U.K.,
Australia and some other areas use 9 kHz spacing, while Canada, the United States and some other
Western Hemisphere countries use 10 kHz spacing.
❏ When shipped, the System is set to 9 kHz spacing.
In case of Brazil, the System is set to 10 kHz spacing.
❏ To select the 10 kHz interval, be sure that the Unit is in STANDBY mode. Turn on by pressing the
button while pressing the TUNING UP button on the Unit. “AM --10” appears on the display.
❏ To change back to 9 kHz, be sure that the Unit is in STANDBY mode. Turn on by pressing the
button while pressing the TUNING DOWN button on the Unit. “AM -- 9” appears on the display.
One Touch Radio ——————————————————————
Just press the FM/AM button to turn on the Unit and start playing the most recent station tuned in.
o You can switch from any other sound source to the radio by pressing the FM/AM button.
11
EN.01-36.MX-J111V[U]/f
11
99.9.17, 3:58 PM
English
Tuning in a Station
Press the FM/AM button to turn on the radio.
The frequency of the previously selected channel appears on the display.
CD
SELECT
FM/AM
FM/AM
or
AUX
TAPE
Switching between Frequency Bands ———————————
Press the FM/AM button.
Each time you press the button, the band alternates between FM and AM.
Three ways to select a station ——————————————
o
TUNING
UP
TUNING
DOWN
o
o
P. DOWN
P. UP
Press the TUNING UP or TUNING DOWN button repeatedly to move from frequency to frequency
until you find the one you want. (Manual Tuning)
OR
Press and hold the TUNING UP or TUNING DOWN button for a few seconds, and the frequency
starts changing on the display. When a station is tuned in, the frequency stops changing. (Auto
Tuning)
OR
Possible only after presetting stations.
Press once and release the P. DOWN 4 or ¢ P. UP button to go to the next preset station.
You can also use the Remote Control to tune in preset channels:
1. Press the FM/AM button so that you can receive the most recent station tuned in.
2. Select the station by entering the preset number on the number keys of the Remote Control.
• Example: For channel 5, press 5. For channel 15, press +10 then 5.
For channel 20, press +10, then 10. For channel 30, press +10 twice then 10.
•
After you have selected the preset number and the number is displayed, the broadcast frequency
of the selected channel is displayed.
Presetting Stations
1
FM/AM
CD
SELECT
FM/AM
or
AUX
TAPE
You can preset up to 30 FM stations and up to 15 AM stations for the preset numbers.
Note: In some cases, test frequencies have been already memorized for the tuner since the factory
examined the tuner preset function before shipment. This is not a malfunction. You can preset the stations
you want into memory by following the presetting method.
1. Select a band by pressing the FM/AM button.
2. Press the TUNING UP or TUNING DOWN button to tune into a
station.
2
TUNING
UP
3. Setting the preset number by pressing the number keys on the
Remote Control:
TUNING
DOWN
3
CLOCK
1
TIMER
2
– SELECT +
4
5
ECHO
10
V.INTRO
Release the button after the number starts to blink. This completes the preset setting.
ON SCREEN
6
SET
7
3
For preset numbers 1 to 10:
Press and hold the number key for the preset number you want to set.
For preset numbers 11 to 20:
Press and hold the 1 to 10 buttons after pressing the +10 button.
For preset numbers 21 to 30:
Press and hold the 1 to 10 buttons after pressing the +10 button twice.
8
HIGHLIGHT
9
4. Repeat steps 1 – 3 for each station you want to store in memory
with a preset number.
CAUTION: If the Unit is unplugged or if power failure occurs, the preset
stations will be erased after a few days. If this happens, preset the
stations again.
+10
Changing the FM Reception Mode
When an FM stereo broadcast is hard to receive or noisy, press the FM MODE button on the Remote
Control so that the “MONO” indicator lights up on the display. Reception improves, but there is no stereo
effect.
FM MODE
To restore the stereo effect, press the FM MODE button on the Remote Control so that the “MONO”
indicator goes off. In this stereo mode, the “ST” indicator lights up and you can hear stereo effects, when
a program is broadcast in stereo.
12
EN.01-36.MX-J111V[U]/f
12
99.9.17, 3:58 PM
English
Using the CD Player
0 CD buttons
Disc Trays
Number keys
REPEAT
RM-SMXJ111V REMOTE CONTROL
CLOCK
TIMER
ON SCREEN
REPEAT
1
2
3
– SELECT +
4
5
ECHO
7
8
COMPACT
DIGITAL VIDEO
NTSC/PAL
/PAL AUTO
HIGHLIGHT
PLAY & EXCHANGER
9
CD1
CD2
CD3
STANDBY
STILL
CD Player
control buttons
CD
PREV
NEXT
NTSC / PAL
/ PAL AUTO
VOLUME
PLAY MODE
+10
10
RANDOM
RANDOM
SLEEP
V.INTRO
6
SET
SOUND
MODE
ECHO
ACTIVE
BASS EX.
MPX/V.REPLACE
/V.MASKING
RETURN SELECT
PHONES
NTSC/PAL COMPATIBILITY
VIDEO CD
TAPE
A – TAPE - B
REC PAUSE
CD
FM/AM
MIC LEVEL
SHIFT
SHIFT
FM MODE
FM/AM
TUNING
UP
AUX
MIN
MAX
MIC
TUNING
DOWN
VOLUME
DUBBING
AUX
DECK A/B
PREV
REV. MODE
NEXT
P.DOWN
i
SOUND
MODE
SELECT
TAPE
VCD
NUMBER
CD £/8
REC
START/STOP
CD REC START
P.UP
KEY
CONTROL
NEXT, ¢ P. UP
,7
I
PLAY
PREV., P. DOWN 4
REC/PLAY
AUTO REVERSE
EJECT
VCD NUMBER +, –
AUTO REVERSE
EJECT
Display
Disc display
Track number, Playing time, Step number
Disc display
kHz
MHz
A.BASS EX
RANDOM
ALL PRGM CLOCK
S.MODE
REC SLEEP MONO ST
Disc marker
Repeat indicator
Play mode indicator
A red marker lights on the disc
display for the disc number you have
selected. This disc display blinks
while a CD is being played.
The center of the disc display is not lit
while CD Player is checking that
there is no disc in the disc tray for the
corresponding disc number.
When the System is being used, the display shows other items as well.
However, we have only shown the items described in this section.
The System’s CD Player has an Automatic Changer with 3 disc trays. You can use Continuous, Random,
Program or Repeat Play for the discs in CD1, CD2 and CD3. Repeat Play can repeat all the tracks on all
the CD’s, the tracks on one of the CD’s or one track on one CD. There is also the Tray Lock function,
which safely keeps discs in the trays.
Here are the basic things you need to know to play a CD and locate the different selections on it. Each
selection is called a track, so when we are talking about locating a track, we are also talking about how
you find a certain song or performance.
This Unit can play the following CDs :
• Audio CD, including single discs: for audio reproduction.
• Video CD: for audio and video (moving picture) reproduction, including multiplex sound.
• Video CD with Playback Control function: featuring menu-driven operation and high-resolution
still pictures for audio and video (moving picture) reproduction, including multiplex sound.
• CD-G (CD Graphics): for audio and video (still picture) reproduction, including multiplex sound.
PlayBack
Control
13
EN.01-36.MX-J111V[U]/f
13
99.9.17, 3:58 PM
o
Press the CD £ /8 button (or the 3 button on the Remote Control).
• If there is a CD in the disc tray for the selected disc number, the power is automatically turned on
and the CD is played from the first track.
• If there is no CD in the disc tray for the selected disc number, the power is automatically turned
on and “NO DISC” appears on the display. The CD Player is in stop mode.
Press the CD1, CD2 or CD3 button.
• If there is a CD in the disc tray for the selected disc number, the power is automatically turned on
and playback starts from the selected CD.
• If there are no CDs in CD Player, the power is automatically turned on and “NO DISC” appears
on the display in Normal Play mode. The CD Player is set to stop mode.
Press the 0 button.
• The power turns on, and the tray opens automatically.
Inserting Discs
1. Press the 0 button on the left of the Disc button you want to insert
the disc into.
The disc tray slides out automatically.
2. Place a CD, with its label side up, onto the tray.
ATTENTION: To avoid malfunctions when you play a CD, please set the CD in the right place at the
center of the tray.
CD
Tray
CORRECT
INCORRECT
3. Press the 0 button to close the tray.
4. Repeat step 1 to step 3 to insert other discs into other trays.
•
o
To continue putting discs into other trays, even if a tray is open, by pressing the 0 button of
another disc tray, the open tray will close automatically, and the new disc tray will slide out.
To put an 8 cm CD into a tray, insert it so that it is aligned with the groove in the tray’s center.
If a tray is open when the System switches to Standby mode, the tray is closed automatically.
If the CD cannot be read correctly (due to scratches etc.), “00 00000” appears on the display.
14
EN.01-36.MX-J111V[U]/f
14
99.9.17, 3:58 PM
English
The Quickest Way to Start a CD Is with the One Touch
Operation —————————————————————————
English
Basics of Using the CD Player —
Normal Play
Playing a Disc ———————————————————————
1. Prepare the discs.
2. Press the CD £/8 or the CD1, CD2 or CD3 button of the disc you
want to play.
CD
SELECT
FM/AM
TAPE
AUX
When using the Remote Control, press the 3 button or the CD1, CD2 or CD3 buttons.
The first track of the selected disc will begin playing.
• If these buttons are pressed while the tray is open, the tray is automatically closed and playback
starts.
or
Playing order of the CDs
The selected CDs are played continuously in the following order.
= CD1 = CD2 = CD3 = (back to the beginning)
To stop playing the disc, press the 7 button (or the 7 button on the Remote Control).
To stop play and remove the disc, press the 0 button for the disc being played.
To pause, press the CD £/8 button (or the 8 STILL button on the Remote Control). The display will
blink.
To cancel pause, press the CD £/8 button again (or press the 3 button on the Remote Control). Play
continues from the point where it was paused.
Selecting a Disc, Track or Passage within a Track ————
1. Press the CD1, CD2 or CD3 button for the disc tray containing the
track you want to listen to.
•
P. DOWN
P. UP
Example: for the third disc, press CD3.
2. Press the P. DOWN 4 or ¢ P. UP button to select the track.
The selected track starts playing.
Each time you briefly press and release the P. DOWN 4 or ¢ P. UP button, the track changes by
one.
• Press and release the ¢ P. UP button to go ahead one track at a time.
• Press and release the P. DOWN 4 button to go back one track at a time.
Holding down the P. DOWN 4 or ¢ P. UP button, during playback, will fast forward/backwards
the CD so you can quickly find a particular passage in the selection you are listening to.
or
When using the Remote Control, press the 4 or ¢ button.
Locating a Track with the Remote Control Directly ———
Using the number keys on the Remote Control allows you to go directly to the beginning of any track.
CD1
CD2
1. Press the CD1, CD2 or CD3 button for the disc tray containing the
track you want to listen to.
CD3
•
CLOCK
1
TIMER
2
4
5
ECHO
8
10
+10
The selected track starts playing.
• Example: For track 5, press 5. For track 15, press +10 then 5. For track 20, press +10, then 10.
For track 32, press +10 three times, then 2.
V.INTRO
6
SET
7
2. Enter the number of the track you want to listen to with the
number keys.
ON SCREEN
3
– SELECT +
Example: for the third disc, press CD3.
HIGHLIGHT
9
Changing Discs while Playing ———————————————
You can replace a CD in a tray not being used, while another CD is playing.
1. Press the 0 button of the tray not being used.
The tray opens.
2. Replace the disc in the tray.
3. Press the 0 button to close the tray.
15
EN.01-36.MX-J111V[U]/f
15
99.9.17, 3:58 PM
You can change the order in which the discs and tracks play, and select only the discs and tracks you want
from among those loaded in the CD Player.
o You can program up to 32 steps in any desired order from among the discs in the player.
o You can only make a program when the CD Player is stopped.
Use the Remote Control.
1. Press the PLAY MODE button to
select “PROGRAM” while the CD
player is stopped.
PLAY MODE
A.BASS EX
The display changes with each press of the
PLAY MODE button as shown below.
S.MODE
PRGM
= PROGRAM = RANDOM = (back to the beginning)
•
•
CD1
CD2
CD3
The “PRGM” play mode indicator lights up.
If a program is already in progress, the last step of the program is displayed.
Disc number
2. Select a disc with the
CD1, CD2 or CD3 button.
Step number
The display changes to the Program Entry display.
A.BASS EX
S.MODE
A.BASS EX
S.MODE
PRGM
CLOCK
1
TIMER
2
3
– SELECT +
4
5
ECHO
8
10
+10
Track number
3. Press the number keys (1 to 10 and
+10) to select the track to program.
V.INTRO
•
6
SET
7
ON SCREEN
HIGHLIGHT
Example: For track 5, press 5.
For track 15, press +10 then 5.
For track 20, press +10 then 10.
PRGM
9
4. Repeat step 2 and step 3 to select the other tracks for the
program.
5. Press the 3 button.
The Unit plays the tracks in the order you have programmed them.
o
o
o
REPEAT
If you try to program a disc tray that is empty, or a track number that does not exist on a disc (for
example, selecting track 14 on a disc that only has 12 tracks), the selected disc or track are skipped
when the program is played.
You can skip to a particular program step by pressing the 4 or ¢ button during the program play.
To play the programmed tracks repeatedly, press the REPEAT button to select “
ALL”. The Repeat
mode indicators light up in sequence with each press of the REPEAT button.
To stop playing, press the 7 button (or the 7 button on the Remote Control) once.
To delete all the tracks in a program, press the 7 button on the Unit (or the 7 button on the Remote
Control) while the CD Player is stopped. The program is deleted and the “PRGM” play mode indicator
goes out and Normal play is resumed.
To cancel Program play, press the PLAY MODE button on the Remote Control while the CD Player
is stopped to select a different play mode. The “PRGM” indicator goes out and the next Play mode is
selected.
16
EN.01-36.MX-J111V[U]/f
16
99.9.17, 3:58 PM
English
Programming the Playing Order of the
Tracks
English
Random Play
The tracks will play in no special order when you use this mode.
On the Unit
Press the RANDOM button while the CD player is stopped.
RANDOM
The playback automatically starts from the selected CD.
• “RANDOM” on the Play mode indicator lights up.
On the Remote Control
1. Press the PLAY MODE button
while the CD Player is stopped, to
A.BASS EX
select “RANDOM”.
RANDOM
• “RANDOM” lights in the Play mode
indicator.
The display changes with each press of the PLAY MODE button as shown below.
PLAY MODE
S.MODE
= PROGRAM = RANDOM = (back to the beginning)
2. Press the 3 button.
Playback starts from the selected CD.
Note: Random play cannot be activated with the CD1, CD2 or CD3 button.
To skip to the next track, press the ¢ button during playback. The next track is jumped to with each
press of the button. Press the 4 button to jump to the start of the track being played.
Press the REPEAT button before or during Random play to instruct the System to continue with a
different random track selection after the last selection is played.
To cancel Random play mode, press the RANDOM button again while the CD Player is stopped.
The Random play mode indicator goes out and Normal play is resumed. When using the Remote Control,
press the PLAY MODE button while the CD Player is stopped to select a different play mode. The
“RANDOM” indicator goes out and the next play mode is selected.
Repeating a Selection or the Discs
You can have all the discs, the program or the individual selection currently playing repeat as many times
as you like.
Press the REPEAT button on the unit.
REPEAT
The display changes with each press of the button, as shown below.
=
=
ALL = (back to the beginning)
: Repeats one track on a CD.
ALL: For Normal Play, repeats all the tracks on all the CDs.
For Random Play, repeats all the tracks on all the CDs in the CD Player.
For Program Play, repeats all the tracks in the program.
To exit Repeat play mode, press the REPEAT button until the Repeat play mode indicator on the
display goes out.
17
EN.01-36.MX-J111V[U]/f
17
99.9.17, 3:58 PM
In order to safely keep the discs in the CD Player, the three trays can be electronically locked in a single
operation.
When the electronic lock is on, the trays cannot be opened even if the 0 button is pressed.
This function can only be accessed by using the buttons on the Unit itself.
Locking the Electronic Lock ———————————————
1. Put the System’s power into STANDBY mode.
P.DOWN
P.UP
2. While pressing the 7 button, press the 0 button for CD1’s tray on
the Unit.
“LOCKED” appears on the display to let you know that the trays have been locked.
When the CD Player trays are locked, pressing the 0 buttons displays the message “LOCKED” on
the display and the trays do not open. Also, the 0 button cannot be used to automatically turn on the
power.
Unlocking the Electronic Lock ——————————————
1. Put the System’s power into STANDBY mode.
2. While pressing the 7 button, press the 0 button for CD1’s tray on
the Unit.
When the unlock operation is done, “UNLOCKED” appears on the display to show that the lock has
been taken off.
The trays can now be opened by pressing the 0 buttons.
The 0 button can also be used to automatically turn on the power.
18
EN.01-36.MX-J111V[U]/f
18
99.9.17, 3:58 PM
English
Tray Lock Function
English
Playing Video CDs and CD-Gs
You can play Video CDs either with or without the PBC function as well as CD-Gs.
Before playing, set video output correctly according to your TV system. Refer to “Setting Video Out” on
page 6.
1. Turn on the TV and select the video input so that you can view the
pictures from the Unit.
Refer also to the manual supplied for your TV.
2. Prepare discs.
Refer to “Inserting Discs” on page 14.
3. Start playback of the discs.
You can play Video CDs and CD-Gs by using same buttons for playing audio CDs both on the Unit
and on the Remote Control. Refer to “Basics of Using the CD player – Normal Play” on page 15.
When you play video CDs, “VIDEO CD” appears on the display.
When you play CD-Gs, “GRAPHICS” appears on the display.
Special Plays for Video CDs
You can use the following special plays for video CDs both with and without PBC function.
• This operation is possible only using the buttons on the remote control.
Frame-by-Frame Playback —————————————————
Press the 8 STILL button during playback.
STILL
When you press the button, playback pauses and a still picture is shown on the TV screen. Each time you
press the button, still pictures advance by one frame.
To resume normal playback, press the 3 button.
Note: During frame-by-frame playback, no sound comes out.
Viewing Operation Status —————————————————
You can view operation status about the track being played on the TV screen.
When you start playback a disc, information about the disc being played are shown on TV: disc number,
track number and playing time.
1–1
SHIFT
+
ON SCREEN
0:00
Press the ON SCREEN button while pressing down the SHIFT button.
When you press the buttons, the following operation status about the track being played is shown for a
while: CD play mode, karaoke function mode, echo effect and key of the track.
NORMAL
REPEAT
ECHO
KEY I....... .......i
To exit operation status, press the ON SCREEN button again while pressing down the SHIFT button.
“DISP. OFF” appears on the TV screen, and all the information about the track being played disappear.
19
EN.01-36.MX-J111V[U]/f
19
99.9.17, 3:58 PM
You can view the contents of a video CD, the first 5 seconds of each track on the disc.
• For a video CD with PBC function, cancel the PBC function. Refer to “Playing Video CDs without
Using Menu Screen” on page 22.
CD1
CD2
+
SHIFT
1. Press the CD1, CD2 or CD3 button to select the disc you want to
view the video intro.
CD3
Playback starts.
2. Press the V.INTRO button while pressing down the SHIFT button
after a picture appears on the TV screen.
V.INTRO
The video intro starts and shows in sequence (the first 5 seconds of nine tracks) on the TV screen. If
the disc consists more than 9 tracks, remaining tracks are shown after the first 9 tracks finish showing.
VIDEO INTRO
CLOCK
1
TIMER
2
5
ECHO
7
8
10
+10
CD1
3
4
5
6
7
8
9
Playback starts from the selected track.
V.INTRO
6
SET
2
3. Press the number button of the video intro you want to playback.
3
– SELECT +
4
ON SCREEN
1
To stop and cancel the video intro, press the 7 button.
HIGHLIGHT
9
Viewing the Highlights of a Video CD ———————————
You can view 9 highlight scenes of the selected track on a video CD. These highlight scenes are created
by dividing the track equally into 9 portions and the beginning (5 seconds each) of those 9 scenes are
shown on the TV screen.
CD2
1. Press the CD1, CD2 or CD3 button and the number button of the
track you want to view the highlights.
CD3
Playback starts.
SHIFT
+
2. Press the HIGHLIGHT button while pressing down the SHIFT
button after a picture appears on the TV screen.
HILIGHT
The highlight starts and shows in sequence (the first 5 seconds of nine divided highlight scenes) on
the TV screen for 1 minute.
HIGHLIGHT
CLOCK
1
TIMER
2
4
5
ECHO
7
8
10
+10
2
0:00
3
0:00
4
0:00
5
0:00
6
0:00
7
0:00
8
0:00
9
0:00
Playback starts from the beginning of the selected scene.
• If you don't select any highlight scene to playback for 1 minute, another 9 highlight scenes of the
next track will be shown on the TV screen.
V.INTRO
6
SET
0:00
3. Press the number button of the highlight scene you want to
playback.
ON SCREEN
3
– SELECT +
1
HIGHLIGHT
9
To stop and cancel the highlight, press the 7 button.
Notes: During the video intro or highlight play, the pictures shown on the TV screen may be partially
distorted, resulting from noises or incorrect manufacturing of the disc.
20
EN.01-36.MX-J111V[U]/f
20
99.9.17, 3:58 PM
English
Viewing the Video Intro of a Video CD ——————————
English
Playing Video CDs with PBC Function
The PBC (Playback Control) function allows you to enjoy menu-driven operation and high resolution still
pictures.
Menu-driven operation
You can interact with the TV screen using menu screens to select and play items of the disc.
High-resolution still pictures
You can view high-resolution still pictures having quality four times higher than playback pictures.
Playing Video CDs with Using Menu Screens ———————
When you start playing a video CD with the PBC function, a selection menu appears on the TV screen.
This menu shows a list of items to select and play.
o The playback operation procedure may differ depending on the disc you use.
1. Turn on the TV and select the video input so that you can view the
pictures from the Unit.
Refer also to the manual supplied for your TV.
2. Prepare Video CDs.
Refer to “Inserting Discs” on page 14.
3. Start playback of the Video CD.
Press the CD £/8 button to start playback of the currently selected CD or press the CD1, CD2 or
CD3 button to select the disc and start playback.
“VIDEO CD” and then “PBC” appears on the display.
\
+
TUNING
UP
VCD
NUMBER
TUNING
DOWN
–
4. Select the item you want to playback when a selection menu
appears on the TV.
On the Unit
Press VCD NUMBER +, – BUTTON to select the item number. Then press CD £/8 to start the
playback.
+
On the Remote Control
CD
SELECT
FM/AM
TAPE
Press number button to select the item number and start the playback.
AUX
or
CLOCK
1
TIMER
2
3
– SELECT +
4
5
ECHO
8
10
+10
V.INTRO
6
SET
7
ON SCREEN
HIGHLIGHT
9
Basic Flow of Menu Play Operation
Some disc may show moving pictures or a divided screen.
• When a list of items appears, you can select a number of the item you want to play back.
• When moving pictures appear, you can select a moving picture by pressing the SELECT button
while the moving picture you want to view is being played back.
• When a menu appears after the item you have selected finishes playing, you can select another
number of the item you want to view next.
• If the video CD has more than 2 pages of menu, you can view the remaining items by pressing the
NEXT button. If you want to go back to the previous menu, press the PREV button.
• After playback, press the
button (or the
RETURN button on the Remote Control) to go
back to the previous screen. Each time you press the button, you can go back to the previous screen
one by one.
• If you want to stop Menu Play, press and hold the
button (or the
RETURN button on the
Remote Control) for more than 2 seconds. Some discs may return you to the menu screen shown
before playback.
21
EN.01-36.MX-J111V[U]/f
21
99.9.17, 3:58 PM
English
Concept of PBC Flow
TV Screen
Main menu
1. ......
2. ......
3. ......
NEXT
1. Sub menu
1. ......4. ......
2. ......
3. ......
2. Still Picture
Playback
3. Sub menu
1. ......
2. ......
3. ......
3. Sub menu
4. ......
5. ......
6. ......
RETURN
PREV
1. Sub-sub menu
1. ......
2. ......
3. ......
2. Still Picture
Playback
3. Moving
Pictures
4. Moving
Pictures
RETURN
Note: If the menu is shown on the TV screen for more than 10 minutes, the screen background fades out
automatically to avoid screen burn-in.
Playing Video CDs without Using Menu Screen
—————
You can cancel the PBC function and play the disc without using menu screen.
1. Turn on the TV and select the video input so that you can view the
pictures from the Unit.
Refer also to the manual supplied for your TV.
2. Prepare a Video CD.
Refer to “Inserting Discs” on page 14.
3. Press the REPEAT button on the Unit to select either “
“
ALL.”
REPEAT
” or
4. Start playback of the Video CD.
Press the CD £/8 button to start playback of the currently selected CD or press the CD1, CD2 or
CD3 button to select the disc and start playback.
To stop during playback, press the
button (or the
RETURN button on the remote control).
To restore the PBC function, press the REPEAT button repeatedly until the REPEAT indicator goes
out.
Note: When the PBC function is canceled, some pictures, such as still pictures, may not be played back.
22
EN.01-36.MX-J111V[U]/f
22
99.9.17, 3:58 PM
English
Using the Cassette Deck
(Listening to a Tape)
RM-SMXJ111V REMOTE CONTROL
CLOCK
1
TIMER
2
REPEAT
ON SCREEN
RANDOM
3
COMPACT
DIGITAL VIDEO
– SELECT +
4
5
ECHO
6
SET
7
8
10
+10
NTSC/PAL
/PAL AUTO
SLEEP
V.INTRO
PLAY & EXCHANGER
HIGHLIGHT
9
VOLUME
STANDBY
PLAY MODE
CD1
SOUND
MODE
CD2
CD3
STILL
ECHO
CD
ACTIVE
BASS EX.
MPX/V.REPLACE
/V.MASKING
PHONES
PREV
NEXT
RETURN
NTSC/PAL COMPATIBILITY
SELECT
TAPE
REC PAUSE
SHIFT
A – TAPE - B
FM MODE
CD
FM/AM
MIC LEVEL
TUNING
UP
MIN
MAX
MIC
AUX
FM/AM
TAPE ™ £
VIDEO CD
Cassette Deck
control buttons
SELECT
TAPE
DUBBING
AUX
DECK A/B
VCD
NUMBER
TUNING
DOWN
PREV
NEXT
P.DOWN
REV. MODE
REC
REC
START/STOP
START/STOP
REV. MODE
i
SOUND
MODE
VOLUME
DECK A/B
CD REC START
P.UP
¢ P. UP
KEY
CONTROL
I
PLAY
REC/PLAY
AUTO REVERSE
EJECT
0 EJECT (Deck A)
7
P. DOWN 4
AUTO REVERSE
EJECT
EJECT 0 (Deck B)
Display
kHz
MHz
A.BASS EX
RANDOM
ALL PRGM CLOCK
S.MODE
REC SLEEP MONO ST
: Tape Direction indicator
: DECK A, B indicator
Tape Direction Indicator on the Display
The Tape Direction indicator tells you which direction the selected
tape deck will use for playback.
During playback, the direction indicator blinks slowly.
During fast left or fast right, the indicator blinks quickly.
During Music Scan mode, the direction indicator alternates between
blinking slowly and quickly repeatedly.
When the System is being used, the display shows other items as well.
However, we have only shown the items described in this section.
: Reverse Mode indicator
The Cassette Deck allows you to play, record and dub audio tapes.
o With Automatic Tape Detection, you can listen to Type I or II tapes without changing any settings.
The use of tapes longer than 120 minutes is not recommended, since characteristic deterioration may
occur and these tapes easily jam in the pinch-rollers and the capstans.
One Touch Play ——————————————————————
By pressing the TAPE ™ £ button (or the 2 or 3 button on the Remote Control), the Unit will come
on, “TAPE” appears in the display, and if a tape is in the deck, it will start to play. If no tape is loaded, the
Unit will come on and wait for you to insert a tape, or select another function.
Regular Play
When the power is already on, you can use this basic procedure:
EJECT
EJECT
1. Press the 0 EJECT button for the deck you want to use.
2. When the cassette holder opens, put the cassette in, with the
exposed part of the tape down, toward the base of the System.
•
If the cassette holder does not open, turn the Unit off, then back on and press the 0 EJECT button
again.
23
EN.01-36.MX-J111V[U]/f
23
99.9.17, 3:58 PM
When both Deck A and Deck B contain a tape, the last deck to have a tape inserted is selected.
To change the selected deck, press the DECK A/B button. When using the Remote Control, press the
A or B button.
4. Press the TAPE ™ £ button (or 2 or 3 button on the Remote
Control).
CD
FM/AM
SELECT
TAPE
AUX
The tape is played in the direction of the button pressed for the selected deck.
• The Cassette Deck automatically stops when one side of a tape has finished playing.
To stop playing, press the 7 button.
To remove the tape, stop the tape, and press the 0 EJECT button.
To change decks while playing a tape, press the TAPE ™ £ button after pressing the DECK A/B
button on the Unit or press the 2 or 3 button after pressing the A or B button on the Remote Control.
DECK A/B
REV. MODE
Fast Left and Fast Right ——————————————————
P. DOWN
P. UP
o
o
While the tape is stopped, press the P. DOWN 4 button (or 1 button on the Remote Control) and
the tape will wind rapidly onto the left side of the cassette without playing.
While the tape is stopped, press the ¢ P. UP button (or ¡ button on the Remote Control) and the
tape will wind rapidly onto the right side of the cassette without playing.
Note: Deck A and Deck B cannot be used for playback at the same time.
Music Scan
To find the beginning of a music track during play, use the Music Scan function. Music Scan searches for
blank portions that usually separate selections, then plays the next selection.
P. DOWN
P. UP
Finding the Beginning of the Current Selection
—————
Press the P. DOWN 4 or ¢ P. UP button (or the 1 or ¡ button on
the Remote Control) during play.
o
Make sure that you press the P. DOWN 4 or ¢ P. UP button (or the 1 or ¡ button on the
Remote Control) in the opposite direction to that in which the tape is playing. Searching stops at the
beginning of the current selection, and the current selection starts automatically.
Finding the Beginning of the Next Selection ———————
Press the P. DOWN 4 or ¢ P. UP button (or the 1 or ¡ button on
the Remote Control) during play.
o
Make sure that you press the P. DOWN 4 or ¢ P. UP button (or the 1 or ¡ button on the
Remote Control) in the same direction as that in which the tape is playing. Searching stops at the
beginning of the next selection, and the next selection starts automatically.
Music Scan works by detecting a 4-second long blank at the beginning of each selection,
so it won’t work well if your tape has:
• No blank at the beginning of a selection .
• Noise (often caused by much use or poor quality dubbing) which fills the blank.
• Long, very soft passages or pauses in a selection. The scan will detect these as 4-second long
blanks. If this happens, just scan again until you reach the selection you want.
Reverse Mode
You can play both sides of a cassette, or play both the tapes in the two Cassette Decks continuously.
Press the REV. MODE button to switch to Reverse Mode.
DECK A/B
The indicator changes with each press of the button as shown.
REV. MODE
=
=
:
:
=
= (back to the beginning)
The Cassette Deck automatically stops after playing one side of the tape.
The Cassette Deck automatically stops after playing both sides of the tape being played (or set
to play).
: After playing both sides of the tape being played (or set to play), the Unit always checks to
see if a tape is in the other deck. If there is, it automatically starts playing that tape. This
Continuous Play function works regardless of which deck starts first. The tapes are played
continuously until the 7 button is pressed.
24
EN.01-36.MX-J111V[U]/f
24
99.9.17, 3:58 PM
English
3. Close the holder gently.
English
Using the Cassette Deck
(Recording)
RM-SMXJ111V REMOTE CONTROL
CLOCK
1
TIMER
2
ON SCREEN
REPEAT
3
RANDOM
– SELECT +
COMPACT
SLEEP
V.INTRO
DIGITAL VIDEO
4
5
ECHO
6
SET
7
8
10
+10
NTSC/PAL
/PAL AUTO
PLAY & EXCHANGER
HIGHLIGHT
9
VOLUME
PLAY MODE
CD1
CD2
CD3
STANDBY
STILL
SOUND
MODE
CD
ECHO
PREV
NEXT
RETURN
ACTIVE
BASS EX.
MPX/V.REPLACE
/V.MASKING
SELECT
PHONES
NTSC/PAL COMPATIBILITY
TAPE
REC PAUSE
REC PAUSE
CD
A – TAPE - B
FM/AM
MIC LEVEL
SHIFT
FM MODE
FM/AM
TUNING
UP
AUX
MIN
MAX
MIC
TUNING
DOWN
VOLUME
SELECT
TAPE
DUBBING
AUX
DECK A/B
VCD
NUMBER
PREV
NEXT
P.DOWN
i
SOUND
MODE
DUBBING
VIDEO CD
REV. MODE
REC
START/STOP
REC START/STOP
CD REC START
P.UP
CD REC START
KEY
CONTROL
I
PLAY
REC/PLAY
AUTO REVERSE
EJECT
AUTO REVERSE
EJECT
Display
kHz
MHz
A.BASS EX
RANDOM
ALL PRGM CLOCK
S.MODE
REC SLEEP MONO ST
REC indicator
When the System is being used, the display shows other items as well.
However, we have only shown the items described in this section.
Recording onto a cassette from any of the sound sources is simple. Just place a tape in Deck B, have the
source ready, make one or two settings, and you’re ready to record. For each source the procedure is a
little bit different and now we’ll explain just what to do for each one. If you forget, just come back to the
section which has the specific procedures you need. But first, here are a few things to make your
recordings better.
Things to Know Before You Start Recording ———————
o
o
o
o
o
o
It may be unlawful to record or play back copyrighted material without the consent of
the copyright owner.
When you want to record onto both sides of a tape, you can set Reverse mode on to do so. However,
recording automatically stops after recording in the 2 direction in Reverse mode. Therefore, make
sure that the tape direction is 3 when recording with Reverse mode on.
The recording level, which is the volume at which the new tape is being made, is automatically set
correctly, so it is not affected by the VOLUME control on the System. Thus, during recording you can
adjust the sound you are actually listening to without affecting the recording level.
Two small tabs on the back of the cassette tape, one for side A and one for side B, can be removed to
prevent accidental erasure or re-recording. To record on a cassette with the tabs removed, you must
cover the holes with adhesive tape first.
However, when a Type II tape is used, only cover part of the hole as shown, since the other part of the
hole is used to detect the tape type.
When recording, you can hear Sound Mode effects through the speakers or headphones. However, the
sound is recorded without Sound Mode effects.
Type I and Type II tapes can be used for recording.
25
EN.01-36.MX-J111V[U]/f
25
99.9.17, 3:58 PM
CAUTION: If recordings you have made have excessive noise or static,
the Unit may be too close to a TV which was on during the recording.
Either turn off the TV or increase the distance between the TV and the
System.
Standard Recording
This is the basic method for recording any source. The System also has special ways for recording CD to
tape, and tape to tape, which save you time and effort, as well as give you some special effects. However,
when you need to add a selection to a tape you have made, or are combining selections from several
sources on one tape, use the method described below; just substitute the source you want into this
procedure, such as a tape in Deck A, a CD, or the Tuner. You can also record from auxiliary source with
this procedure.
Recording Any Sound Source to Tape ———————————
Follow these steps to record from any sound source onto a tape in Deck B.
Using the Unit
1. Insert a blank or erasable tape into Deck B.
2. Press the REV. MODE button if you want to record on both sides of
the tape.
DECK A/B
Press the button until the “
” or “
” indicator is lit.
• When using Reverse mode, insert the tape so that it will be recorded in the forwards 3 direction.
REV. MODE
3. Check the recording direction for the tape.
Check that the Tape Direction indicator is the same as that for the tape in the tape deck. If the
directions are different, press the 7 button after pressing the TAPE ™ £ button to set the tape
direction.
• When using Reverse mode to record both sides of a tape, check that the Tape Direction indicator
is in the forwards 3 direction. If the direction indicator is not in the forwards 3 direction, press
the TAPE ™ £ button then press the 7 button.
4. Prepare the source by, for example, tuning in a radio station,
loading CDs, or turning on connected equipment.
REC
START/STOP
5. Press the REC START/STOP button.
The “REC” indicator light comes on and the System begins recording.
Using the Remote Control
1. Insert a blank or erasable tape into Deck B.
2. Press the REV. MODE button on the Unit if you want to record on
both sides of the tape.
DECK A/B
REV. MODE
Press the button until the “
” or “
” indicator is lit.
• When using Reverse mode, insert the tape so that it will be recorded in the forwards 3 direction.
3. Prepare the source by, for example, tuning in a radio station,
loading CDs, or turning on connected equipment.
REC PAUSE
4. Press the REC PAUSE button.
The “REC” indicator blinks.
5. Press the 2 or 3 button.
Recording starts in the direction of the button pressed.
• When using Reverse Mode to record both sides of a tape, press the 3 button.
Notes for using Reverse mode for recording
When recording in Reverse Mode, the System automatically stops when it reaches the end of the reverse
2 direction. To record on both sides of a tape, make sure that the recording direction for the tape inserted
into Deck B is forwards 3, and that the Tape Direction indicator is also forwards 3, before you start
recording.
26
EN.01-36.MX-J111V[U]/f
26
99.9.17, 3:58 PM
English
Note: At the start and end of cassette tapes, there is leader tape which cannot be recorded onto.
Depending on the recording source, the first part of the recording may be missing because of the leader.
When recording CDs or radio broadcasts, to get the beginning of the recording on the tape, first wind on
the leader before beginning recording.
English
To pause at any time during the recording process
Press the REC PAUSE button on the Remote Control. Then press either the 2 or 3 button on the Remote
Control or REC START/STOP button on the Unit to restart recording.
To stop at any time during the recording process
Press the REC START/STOP button on the Unit again, or press the 7 button on the Remote Control.
Recording AM station to tape
REPEAT
When recording an AM broadcast, beats may be produced which are not heard when listening to the
broadcast. In this case, press the REPEAT button on the CD Player to eliminate the beats.
1. Set to AM station and start recording.
2. Press the REPEAT button to eliminate the beats.
Each time you press the button, the display changes as shown below:
= CUT-1 = CUT-2 = CUT-3 = (back to the beginning)
CD Direct Recording
Everything on the CD goes onto the tape in the order it is on the CD, or according to the order you have
set in a program.
1. Prepare CDs. (Refer to “Inserting Discs” on page 14.)
If the current playing source is not the CD player, press CD £ /8, then 7 of the CD control before
going to the next step.
2. Insert a cassette in Deck B to record on.
When you want to record on both sides of a tape, press the REV. MODE to turn Reverse mode on.
Check that the recording direction for the tape and the Tape Direction indicator are correct. (See page
26 “Notes for using Reverse mode for recording”.)
3. Press the CD REC START button.
CD REC START
The “REC” indicator light comes on and the System begins recording.
If you make a recording with Reverse mode on:
If the tape reaches its end while recording a song, the last song will be re-recorded at the beginning of
the other side.
To stop at any time during the recording process, press the 7 button.
Note: When making Sleep timer settings while doing CD Direct recording, set the time so that there is
enough leeway to finish the recording before the power goes off. If the time is set to about the length of
the CD, the power may go off before recording finishes.
For CD Direct Recording using more than one disc, use a blank tape. If you use a prerecorded tape,
prerecorded material may not be erased between newly-recorded tracks.
Tape to Tape Recording (Dubbing)
Recording from one tape to another is called dubbing.
You can dub tapes simply, with just a single button.
o When dubbing tapes, make sure that the playback direction of Deck A and Deck B are the same.
o When you want to record both sides of a tape, press the REV. MODE button to turn Reverse mode on.
o It is preferable that the type of tape (Type I or Type II) you record from be the same as the type you
record onto.
How to Use the DUBBING Button —————————————
1. Press the TAPE ™ £ button, then the 7 button.
CD
FM/AM
SELECT
TAPE
AUX
2. Insert the source cassette you want to copy from into Deck A for
playback.
Insert the cassette so that it will be played in the forwards 3 direction.
3. Insert the blank or erasable cassette you want to copy onto into
Deck B for recording.
Insert the cassette so that it will be recorded in the forwards 3 direction.
4. Press the DUBBING button.
DUBBING
Deck A and Deck B will start simultaneously.
To stop dubbing, press the 7 button or the REC START/STOP button.
o
When doing dubbing with the DUBBING button, you can hear Sound Mode effects through the
speakers or headphones. However, the sound is dubbed without Sound Mode effects.
27
EN.01-36.MX-J111V[U]/f
27
99.9.17, 3:58 PM
Display
RM-SMXJ111V REMOTE CONTROL
CLOCK
1
CLOCK
– SELECT +
SET
TIMER
2
6
SET
7
8
10
+10
TIMER
SLEEP
V.INTRO
5
ECHO
ON SCREEN
3
– SELECT +
4
English
Using the Timer
HIGHLIGHT
Clocktime, timer-on time, etc.
9
PLAY MODE
CD1
CD2
CD3
STILL
CD
PREV
NEXT
RETURN
kHz
MHz
SELECT
TAPE
REC PAUSE
A – TAPE - B
A.BASS EX
SHIFT
FM MODE
FM/AM
AUX
RANDOM
ALL PRGM CLOCK
SHIFT
i
SOUND
MODE
VOLUME
S.MODE
REC SLEEP MONO ST
KEY
CONTROL
I
CLOCK indicator
Timer indicator
When the System is being used, the display shows other items as well.
However, we have only shown the items described in this section.
The timers let you control listening and recording functions automatically.
Use the Remote Control to set the clock and timers.
Setting the Clock
The timers depend on the clock: the clock must be right for the timers to work as you expect.
You can set the clock whether the Unit is on or off.
Note that the clock must be set, otherwise the timers cannot be set.
SHIFT
1. Press and hold the SHIFT button during the setting procedure.
CLOCK
2. Press the CLOCK button.
1
The “CLOCK” indicator on the display lights up and the clock time blinks.
3. Press the SELECT + or – button to set the time.
– SELECT +
4
Pressing the SELECT + button increases the time and pressing SELECT – decreases the time.
Pressing the button continuously advances or POSTPONES the time in 10 minute intervals.
5
SET
4. Press the SET button.
8
The blinking time display changes from a blinking display to a steady display and the clock timer
starts from 0 seconds.
5. Release the SHIFT button.
CAUTION: If there is a power failure, the clock loses its setting. The
display shows “0:00”, and the clock must be reset.
28
EN.01-36.MX-J111V[U]/f
28
99.9.17, 3:58 PM
English
Setting the Timer
o
You can set the Timer whether the Unit is on or off.
Procedure For Setting the Timer
SHIFT
1. Press and hold the SHIFT button during the setting procedure.
2. Press the TIMER button.
TIMER
The Timer indicator on the display lights up and the blinking “TIMER ON” changes to the On Time
setting display.
2
\
– SELECT +
4
3. Set the time you want the Unit to
come on.
5
Press the SELECT + or – button to set
the On Time.
4. Press the SET button.
SET
8
“TIMER OFF” blinks on the display, and the display changes to the Off Time setting display.
\
– SELECT +
4
5. Set the time you want the Unit to
be turned off.
5
Press the SELECT + or – button to set
the Off Time.
SET
6. Press the SET button.
8
The name of the source blinks in the display.
– SELECT +
4
7. Press the SELECT + or – button
to select the source.
5
The display changes with each press of the button
as shown.
Ô TUNER Ô TUNER REC Ô CD Ô TAPE Ô
TUNER:
TUNER REC:
CD:
TAPE:
•
Selects the last station you were listening to.
Records the last station you were listening to.
Plays the last CD you were listening to.
Plays the last tape you were listening to.
In the source “TUNER”, “CD”, or “TAPE”, the timer acts as a Daily timer. Once the Daily timer
has been set, it will be activated at the same time every day until the setting is turned off.
In the source “TUNER REC ”, the timer acts as a Once timer. After the Once timer has been
performed, the details of the setting remain stored but the Timer status is set to off.
29
EN.01-36.MX-J111V[U]/f
29
99.9.17, 3:58 PM
SET
The volume level blinks on the display.
– SELECT +
4
English
8. Press the SET button.
8
9. Press the SELECT + or – button
to set the volume level.
5
SET
10. Press the SET button.
8
The display returns to the display before you set the timer.
11. Release the SHIFT button.
Before Turning the Unit Off
•
•
Check that the selected source is ready.
If you will be recording a source while you are out, set the volume to 0.
To turn the Timer off, press the TIMER button while pressing down the SHIFT button. The Timer
indicator on the display goes out.
Setting the Sleep Timer
Use the Sleep Timer to turn the Unit off after a certain number of minutes when it is playing. By setting
this timer, you can fall asleep while listening to music and know your Unit will turn off by itself rather
than play all night.
o You can only set the Sleep Timer when the Unit is on and a source is playing.
SLEEP
To set the Sleep Timer, follow this procedure:
1. With the System on and a source
playing, press the SLEEP button
on the Remote Control.
A.BASS EX
S.MODE
SLEEP
2. Set the length of time you want the source to play before shutting
off.
•
Each time you press this button, it changes the number of minutes shown on the display in this
sequence:
= 10 = 20 = 30 = 60 = 90 = 120 = Canceled
When the number of minutes you want shows on the display, just wait 5 seconds until the number of
minutes stops blinking, and is lighted steadily.
The Unit is now set to turn off after the number of minutes you set.
To Change the Sleep Timer Setting
Press the SLEEP button until the number of minutes you want appears on the display.
To Cancel the Sleep Timer Setting
Press the SLEEP button until the “SLEEP” indicator goes off on the display.
Turning off the Unit also cancels the Sleep Timer.
30
EN.01-36.MX-J111V[U]/f
30
99.9.17, 3:58 PM
English
Using the Microphone
REPEAT
RANDOM
COMPACT
DIGITAL VIDEO
NTSC/PAL
/PAL AUTO
PLAY & EXCHANGER
i
I
ECHO
MPX/V.REPLACE
/V.MASKING
VOLUME
STANDBY
SOUND
MODE
ECHO
ACTIVE
BASS EX.
MPX/V.REPLACE
/V.MASKING
PHONES
NTSC/PAL COMPATIBILITY
VOLUME
VIDEO CD
CD
FM/AM
MIC LEVEL
MIC LEVEL
TUNING
UP
MIN
MAX
MIC
TUNING
DOWN
MIC
SELECT
TAPE
DECK A/B
VCD
NUMBER
PREV
NEXT
P.DOWN
TIMER
2
ECHO
7
8
+10
EJECT
SLEEP
6
SET
10
EJECT
V.INTRO
5
ECHO
AUTO REVERSE
ON SCREEN
3
– SELECT +
4
CD REC START
REC/PLAY
AUTO REVERSE
RM-SMXJ111V REMOTE CONTROL
CLOCK
REV. MODE
REC
START/STOP
P.UP
PLAY
1
DUBBING
AUX
HIGHLIGHT
9
PLAY MODE
CD1
CD2
CD3
STILL
Display
CD
PREV
NEXT
RETURN
SELECT
Source, Sound Mode Volume Level etc.
TAPE
REC PAUSE
SHIFT
A – TAPE - B
FM MODE
FM/AM
AUX
SHIFT
i
SOUND
MODE
VOLUME
KEY
CONTROL
I
VOLUME +, –
kHz
MHz
KEY CONTROL i, I
A.BASS EX
RANDOM
ALL PRGM CLOCK
S.MODE
REC SLEEP MONO ST
: Karaoke indicator
: Echo indicator
This Unit provides one microphone terminal. By connecting a microphone (not supplied) into the mic
jack, you can use a microphone and enjoy Karaoke functions. Also you can apply echo to the microphone
sound.
MIC LEVEL
MIN
To prevent howling and squealing when using the microphone, adjust MIC LEVEL and VOLUME.
Also try not to point the microphone at the speakers.
When you don't use the microphone, always set MIC LEVEL to MIN (minimum), and disconnect the
microphone.
MAX
MIC
Playing the Microphone Sound through
the Speakers
1. Turn down MIC LEVEL and VOLUME fully.
CD
FM/AM
SELECT
TAPE
AUX
2. Connect the microphone into the MIC jack on the front panel.
3. Press the CD £/8 button, then press the 7 button.
then
4. Turn MIC LEVEL and VOLUME to adjust the microphone level and
the speaker output level.
To apply echo to your voice, see “Applying Echo to Your Vocal” on page 32.
To record your singing along, see “Standard Recording” on page 26.
31
EN.01-36.MX-J111V[U]/f
31
99.9.17, 3:58 PM
English
Microphone Mixing
When you use microphone with any playback source, follow the procedure below.
MIC LEVEL
1. Turn down MIC LEVEL and VOLUME fully.
MIN
2. Connect the microphone into the MIC jack on the front panel.
MAX
MIC
3. Start the source CD, tape or other equipment.
4. Turn MIC LEVEL and VOLUME to adjust the microphone level and
the speaker output level.
To apply echo to your vocal, see “Applying Echo to Your Vocal” on page 32.
To record your singing along, see “Standard Recording” on page 26.
Applying Echo to Your Vocal
You can apply echo to your vocal.
ECHO
Press the ECHO button on the Unit or Press the ECHO button while
pressing down the SHIFT button on the Remote Control.
+
The Echo indicator comes on.
or
SHIFT
ECHO
Echo is not applied.
7
➧
Echo is applied.
To prevent howling and squealing (feedback) when using the microphone, adjust the MIC LEVEL control
and the VOLUME control. Also, try to avoid pointing the microphone towards the speakers.
❏ When recording sound from the microphone, the digital echo effect is also recorded.
Singing Along with Conventional Audio
CDs or Tapes — Vocal Masking
When you use conventional audio CDs or tapes for the Karaoke source, you can reduce (not erase) the
recorded vocal and replace it with your vocal by singing into the microphone.
MIC LEVEL
1. Turn down MIC LEVEL and VOLUME fully.
MIN
2. Connect the microphone into the MIC jack on the front panel.
MAX
MIC
3. Start the source CD or tape.
MPX/V.REPLACE
/V.MASKING
4. Press the MPX/V.REPLACE/V.MASKING button on the Unit until
“V.MASK” appears on the display.
The “
” indicator comes on.
Each time you press the button, Karaoke function changes as follows:
Lch MONO
Rch MONO
REPLACE
V.MASK
NORMAL
5. Turn MIC LEVEL and VOLUME to adjust the microphone level and
the speaker output level.
To apply echo to your vocal, see “Applying Echo to Your Vocal” above.
To adjust the music key, see “Adjusting Key Control” on page 33.
To record your singing along, see “Standard Recording” on page 26.
Note: When you finish singing, restore the Karaoke function by pressing the MPX/V.REPLACE/
V.MASKING button until “NORMAL” appears on the display.
Radio signal is not reliable source. You may not get satisfactory results when you use radio signal for
the Karaoke source.
Some CDs and tapes are not suitable for Vocal Masking.
• Recorded in monaurally.
• Poorly dubbed tape.
• Duet songs, chorus songs, strong echo songs, and songs with few instruments. Recorded vocal
may not be reduced satisfactory for those sources.
32
EN.01-36.MX-J111V[U]/f
32
99.9.17, 3:58 PM
English
Singing Along with Multiplex Karaoke
Discs or Tapes
When you use multiplex karaoke discs or tapes, you can use Multiplex Sound and Vocal Replace.
Multiplex Sound
In a multiplex karaoke disc or tape, the instrumental part is recorded on the left channel and the vocal part
is recorded on the right channel. By using Multiplex Sound function, you can select the channel to
playback.
Vocal Replace
You can replace the recorded vocal with your vocal while singing along. If you stop singing while a
source is still playing, the recorded vocal will be resumed.
MIC LEVEL
1. Turn down MIC LEVEL and VOLUME fully.
MIN
2. Connect the microphone into the MIC jack on the front panel.
MAX
MIC
3. Start the source CD or tape.
MPX/V.REPLACE
/V.MASKING
4. Press the MPX/V.REPLACE/V.MASKING button on the Unit to select
the output sound.
The “
” indicator comes on.
Each time you press the button, Karaoke function changes as follows:
Lch MONO
Rch MONO
REPLACE
V.MASK
NORMAL
Lch MONO: Only the left channel (instrumental parts) is played back through both right and left
speakers.
Rch MONO: Only the right channel (vocal parts) is played back through both right and left
speakers.
REPLACE: Your voice replaces the right channel (vocal part) when you sing into the microphone.
V.MASK:
This cannot be used for multiplex karaoke sources. Refer to previous page for details.
NORMAL: Cancels the Karaoke function.
5. Turn MIC LEVEL and VOLUME to adjust the microphone level and
the speaker output level.
To apply echo to your vocal, see “Applying Echo to Your Vocal” on page 32.
To adjust the music key, see “Adjusting Key Control” below.
To record your singing along, see “Standard Recording” on page 26.
Note: When you finish singing, cancel the Karaoke function by pressing the MPX/V.REPLACE/
V.MASKING button until “NORMAL” appears on the display.
Adjusting Key Control
You can adjust the key of the source if it's not suite on you.
• This function is available only when you use CDs for karaoke source.
1. Start the source CD.
i
or
KEY
CONTROL
I
2. Press the KEY CONTROL buttons on the Unit or on the Remote
Control.
Press the I button to lower the key.
Press the i button to raise the key.
To cancel key control, press the I button or the i button until “KEY 0” appears on the display.
Notes:
• When you change the key, the key position remains unless you change it again. To restore the original
key of the source, refer to "To cancel key control" above.
• You cannot adjust the key while recording.
• When you change the source, key control function is canceled and the key returns to 0.
33
EN.01-36.MX-J111V[U]/f
33
99.9.17, 3:58 PM
Compact Discs
English
Care and Maintenance
Cassette Tapes
Handle your compact discs, cassette tapes, and
Cassette Deck carefully, and they will last a
long time.
•
•
•
•
•
•
•
•
Remove the CD from the case by holding
it at the edges while pressing the center
hole lightly.
Do not touch the shiny surface of the CD,
or bend the CD.
Put the CD back in its case after use to
prevent warping.
Be careful not to scratch the surface of the
CD when placing it back in the case.
Avoid exposure to direct sunlight, temperature extremes, and moisture.
If the tape is loose in its cassette, take
up the slack by inserting a pencil in
one of the reels and rotating.
If the tape is loose, it may get
stretched, cut, or caught in the cassette.
•
Do not touch the tape surface.
•
Do not store the tape:
- In dusty places
- In direct sunlight or heat
- In moist areas
- On a TV or speaker
- Near a magnet
A dirty CD may not play correctly. If a CD
does become dirty, wipe it with a soft cloth
in a straight line from center to edge.
CAUTION: Do not use any solvent (for
example, conventional record cleaner, spray
thinner, benzine, etc.) to clean a CD.
Cassette Deck
•
If the heads, capstans, and pinch-rollers of the Cassette Deck
become dirty, the following will occur:
- Loss of sound quality
- Discontinuous sound
- Fading
- Incomplete erasure
- Difficulty recording
•
Clean the heads, capstans, and pinch-rollers using a cotton
swab moistened with alcohol.
Moisture Condensation
Moisture may condense on the lens inside
the Unit in the following cases:
• After starting the heating in the room.
• In a damp room.
• If the unit is brought directly from a
cold to a warm place.
Should this occur, the Unit may malfunction. In this case, leave the unit turned on
for a few hours until the moisture evaporates, unplug the AC power cord, and then
plug it in again.
Pinch-rollers
Capstans
General Notes
In general, you will have the best performance by keeping your
tapes, CDs, and the mechanism clean.
• Store tapes and CDs in their cases, and keep them in cabinets
or on shelves.
• Keep the Cassette Deck’s tape doors and the CD trays closed
when not in use.
Heads
•
If the heads become magnetized, the Unit will produce noise
or lose high frequencies.
•
To demagnetize the heads, turn off the Unit, and use a head
demagnetizer (available at electronics and record shops).
34
EN.01-36.MX-J111V[U]/f
34
99.9.17, 3:58 PM
English
Troubleshooting
•
•
If you are having a problem with your System, check this list for a possible solution before calling for service.
If you cannot solve the problem from the hints given here, or the Unit has been physically damaged, call a qualified person, such as your
dealer, for service.
Symptom
Possible Cause
Action
No sound is heard.
Connections are incorrect, or loose.
Check all connections and make
corrections. (See pages 4 – 5.)
Unable to record.
Cassette record protect tabs are removed.
Cover holes on back edge of cassette with
tape.
Poor radio reception
•
•
•
•
•
The antenna is disconnected.
The AM Loop Antenna is too close to
the Unit.
The FM Wire Antenna is not properly
extended and positioned.
•
Reconnect the antenna securely.
Change the position and direction of the
AM Loop Antenna.
Extend FM Wire Antenna to the best
reception position.
The CD skips.
The CD is dirty or scratched.
Clean or replace the CD.
Unable to operate the Remote Control.
•
•
Remove the obstruction.
•
Replace the batteries.
•
The path between the Remote Control
and the sensor on the Unit is blocked.
The batteries have lost their charge.
The CD tray cannot be opened.
The main AC power cord is not plugged in.
Plug in the AC power plug.
The CD does not play.
The CD is upside down.
Put the CD in with the label side up.
Operations are disabled.
The built-in microprocessor has malfunctioned due to external electrical interference.
Unplug the Unit then plug it back in.
The cassette door cannot be opened.
During tape playing, the power cord was
unplugged.
Plug in the power cord, press the
button, and then press the 0 EJECT button.
The image on the TV screen loses its colour.
Video Out selection is unmatching.
Select the correct video out. (See “Setting
Video Output” on page 6.)
The disc sound loses stereo effect.
The MPX sound, Vocal Masking or Vocal
Replace function is in use.
Press the MPX/V.REPLACE/V.MASKING
button until “NORMAL” appears on the
display.
The pictures of the video CD or CD-G is
distorted.
When you pause or advance the pictures
manually, the pictures are distorted. This is
not a malfunction.
35
EN.01-36.MX-J111V[U]/f
35
99.9.17, 3:58 PM
Amplifier
English
Specifications
Power Specifications
Output Power
60 watts per channel, min. RMS,
into 6 ohms at 1 kHz with no more
than 10% total harmonic
distortion.
Input Sensitivity/Impedance
(1 kHz)
AUX IN
300 mV/50 kohms
MIC
3 mV/4.7 kohms
Output Level/Impedance
(1 kHz)
LINE OUT
180mV/2.5 kohms
VIDEO OUT (composite) 1.0Vp-p (75Ω)
Speaker terminals
6 – 16 ohms
Power Requirements
AC 110/127/220/230 – 240 V
50/60 Hz adjustable with the
voltage selector
Power Consumption
85 watts (during operation)
12 watts (in standby mode)
Maximum Power Consumption
(Only for Taiwan)
185 watts
,
Accessories
AM Loop Antenna (1)
Remote Control (1)
Batteries R6S/R6P (SUM-3)/AA (15F) (2)
FM Wire Antenna (1)
Video Cord (1)
AC Plug Adaptor (except for Argentina) (1)
Tuner
Speaker Specifications
FM Tuner
Tuning Range
AM Tuner
Tuning Range
(For Saudi Arabia)
87.5 – 108.0 MHz
Type
531 – 1,602 kHz (at 9 kHz
channel space)
530 – 1,710 kHz (at 10 kHz
channel space)
531 – 1,602 kHz
Speakers
Woofer
Tweeter
Power Handling Capacity
Impedance
Frequency Range
Sound Pressure Level
Dimensions
CD Automatic Changer
CD Capacity
Dynamic Range
Signal-To-Noise Ratio
Wow And Flutter
Playback disc
3 discs
85 dB
90 dB
Immeasurable
Video CD (with/without Playback
Control function), CD Graphic,
Audio CD
2-way, 2-speaker bass-reflex type
(Magnetically-shielded)
Mass
12 cm (43/4 inches) cone × 1
5 cm (2 inches) cone × 1
60 watts
6 ohms
45 Hz – 20,000 Hz
90 dB/w • m
205 × 295 × 225 mm (W/H/D)
(81/8 × 115/8 × 87/8 inches)
3.8 kg (8.4 lbs)
Design and specifications are subject to change
without notice.
Cassette Deck
Frequency Response
Type I (NORMAL)
Type II (CrO2 )
Wow And Flutter
50 – 14,000 Hz
50 – 14,000 Hz
0.15% (WRMS)
General
265 × 295 × 361 mm (W/H/D)
(107 /16 × 115/8 × 141/4 inches)
8 kg (17.7 lbs)
Dimensions
Mass
36
EN.01-36.MX-J111V[U]/f
36
99.9.17, 3:58 PM
Mains (AC) Line Instruction (not applicable for Europe, U.S.A., Canada, Australia, and
U.K.)
Instrucción sobre la línea de la red (CA) (no aplicable para Europa, EE.UU., Canadá,
Australia, ni el Grã-Bretanha)
Instrução sobre a tensão da rede eléctrica (CA) (não aplicável para a Europa, os E.U.A., o
Canadá, a Austrália e o Reino Unido)
ANTENNA
FM
FM
75
GND
AM
EXT
GND
AM LOOP
AUX
IN
RIGHT
LEFT
LINE
OUT
SPEAKERS
RIGHT
LEFT
+
+
–
–
CAUTION:
SPEAKER IMPEDANCE
6 – 16 OHMS.
LINE VOLTS
220V
110V
230V
-240V
127V
VIDEO
OUT
LINE VOLTS
IMPORTANT for mains (AC) line
BEFORE PLUGGING IN, do check that your mains (AC)
line voltage corresponds with the position of the voltage
selector switch provided on the outside of this equipment
and, if different, reset the voltage selector switch, to
prevent from a damage or risk of fire/electric shock.
220V
110V
230V
-240V
127V
IMPORTANTE para la línea de la red (CA)
ANTES DE ENCHUFAR EL EQUIPO, compruebe si la
tensión de la línea de la red (CA) corresponde con la posición
del selector de tensión situado en la parte exterior del equipo,
y si es diferente, reajuste el selector de tensión para evitar el
riesgo de incendios/descargas eléctricas.
IMPORTANTE para a ligação à tensão da rede (CA)
ANTES DE LIGAR O APARELHO A UMA TOMADA DA
REDE, verifique se a tensão da rede CA corresponde à
posição do seletor de voltagem localizado na parte externa
deste equipamento. Caso não corresponda, reajuste o seletor
de voltagem a fim de evitar avarias ou riscos de incêndio e
choque elétrico.
EN, SP, PR, CH, AR
Cover-2 MX-J111V[U]/f
1
V 0899KSMMDWHIT
VICTOR COMPANY OF JAPAN, LIMITED
J
99.7.30, 9:47 PM
C