Blodgett VIB3855-1, VIB3855-3, VIB3855-2 User manual

Blodgett VIB3855-1, VIB3855-3, VIB3855-2 User manual
Item No.
VIB3855-1, VIB3855-2,
VIB3855-3
Single, Double, Triple
In-Vent® Hood System
Quantity
In-Vent® conveyor oven ventilation hood system.
All data is shown per oven section, unless otherwise indicated.
EXTERIOR CONSTRUCTION
!
!
!
!
!
!
!
!
Stainless steel exterior on front, sides, and ducts
Integral exhaust and make-up air plenum and duct collar assembly
Quick release duct fittings and duct extensions
Front air make-up cooling panels
Cooling fan motor exhaust plenum
Conveyor entrance/exit end exhaust plenums
Heat shields over end exhaust plenums and vertical exhaust corner riser
Stainless steel ceiling trim pieces included
INTERIOR CONSTRUCTION
! Aluminized steel, 300 and/or 400 series stainless steel
! Insulated supply ducting
OPERATION
! Captures smoke, contaminants and cooking by-products emanating from
the oven.
! Minimizes amount of tempered air removed from kitchen by surrounding
itself and oven with a layer of untempered make-up air.
! Requires much less exhaust and make-up air flow than conventional
overhead hoods.
! Exhausts grease and smoke from directly over conveyors resulting in
cleaner oven and environment.
! Cooler surfaces lower radiant heat to room and increase operator safety
and comfort significantly
STANDARD FEATURES
Prototype VIB3855-3 In-Vent® is shown on
Triple Stacked Blodgett Model MT3855 Conveyor Oven
which is sold separately.
OPTIONS AND ACCESSORIES
(AT ADDITIONAL CHARGE)
" Installation
! Available in three configurations
" VIB3855-1 for single MT3855 oven
" VIB3855-2 for double stacked MT3855 ovens
" VIB3855-3 for triple stacked MT3855 ovens
! Fully detachable panels without tools
! Quick disconnect ducting for servicing or cleaning
! Adds only 4" to front-to-back dimensions
! Ventilation system controls can be interlocked with the oven’s controls
! Modular design for easier handling and cleaning
BLODGETT OVEN COMPANY
www.blodgettcorp.com
50 Lakeside Avenue, Burlington, VT 05402
Toll Free: (800) 331-5842 • Phone: (802) 860-3700 • Fax: (802) 864-0183
In-Vent® Model VIB3855-1, VIB3855-2, VIB3855-3 for Blodgett Conveyor Oven MT3855
Project
VIB3855-1, VIB3855-2, VIB3855-3
APPROVAL/STAMP
SHORT FORM SPECIFICATIONS
Provide Blodgett In-Vent® ventilation system, engineered for Blodgett model MT3855 conveyor oven. Exterior shall be stainless steel on front sides and ducts. Interior shall be of aluminized steel. Baffle grease filters shall be of galvanized steel or
Universal specification, based on specification sheet for aluminum construction. All exterior panels removable without the use of tools for access to mechanicals and cleaning. Integral
specific system with specific oven model.
exhaust and make-up air plenums connected to stainless steel duct collars with quick disconnect assemblies. Ventilation system shall comply with ANSI/NSF-2 and UL-710. Provide factory authorized assembly and installation at additional cost, per
SYSTEM
OVEN MODEL
ANSI/NFPA-96. Ductwork between extension duct collars and rooftop equipment, and rooftop equipment not included.
VIB3855-1, VIB3855-2, VIB3855-3 MT3855G
DIMENSIONS:
Floor space
91.12" (2314mm) W x 62.3" (1852mm) D
AIRFLOW REQUIREMENTS:
Model
Supply
Duct Size (all models):12" x 12" (305mm x 305mm)
VIB3855-1:
CFM:
1100 CFM
Static Pressure:
0.02-0.03" W.C. (5-7 Pa)
VIB3855-2:
CFM:
1450 CFM
Static Pressure:
0.09" W.C. (22 Pa)
VIB3855-3:
CFM:
1800 CFM
Static Pressure:
0.12" W.C. (30 Pa)
MINIMUM ENTRY CLEARANCE:
Largest uncrated component
55" x 46.3" x 20" (1397mm x 1176mm x 508mm)
Exhaust
SHIPPING INFORMATION:
12" x 12" (305mm x 305mm) Weight:
VIB3855-1
360 lbs. (164 kg)
1500 CFM
VIB3855-2
460 lbs. (209 kg)
1.5" W.C. (373 Pa)
VIB3855-3
560 lbs. (255 kg)
Crate size:
1850 CFM
VIB3855-1
Palletized size and number not yet finalized
1.4" W.C. (348 Pa)
VIB3855-2
Palletized size and number not yet finalized
VIB3855-3
Palletized size and number not yet finalized
2200 CFM
1.8" W.C. (448 Pa)
NOTE: The company reserves the right to make substitutions of components without prior notice
BLODGETT OVEN COMPANY
www.blodgettcorp.com
50 Lakeside Avenue, Burlington, VT 05402
Toll Free: (800) 331-5842 • Phone: (802) 860-3700 • Fax: (802) 864-0183
Printed in U.S.A.
NOTE: FOR COMMERCIAL USE ONLY
P/N M10417 Rev C (6/01)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement