Miele CM7500 coffee machine Quick Start Guide
Below you will find brief information for coffee machine CM7500. The coffee machine allows you to prepare a variety of coffee drinks, from espressos to cappuccinos, as well as hot water for tea. You can also save your favorite drink settings in profiles for easy access. The machine includes features such as a height-adjustable central spout for different cup sizes, a milk frother, and a double shot option for an extra strong coffee.
Advertisement
Advertisement
Cleaning and care
Cleaning the central spout with integrated cappuccinatore
If the central spout is in the uppermost position it cannot be dismantled. The central spout must be moved into the maintenance position to do this.
ĺ Touch for three seconds.
Make sure that all parts are tightly connected to one another.
ĺ Push the dispensing unit back into the central spout and replace the stainless steel cover.
ĺ Touch "OK".
Cleaning the brew unit by hand
Clean the brew unit by hand only under hot running water. Do not use washing-up liquid or any other
cleaning agent.. ĺ Open the machine.
ĺ Dry the funnel to prevent ground coffee sticking to it the next time a coffee is prepared.
ĺ Carefully clean the inside of the coffee machine.
ĺ Push the brew unit back into the coffee machine, making sure it goes in straight.
When "
Place a cleaning tablet in the ground coffee drawer and then close it
" appears in the display: ĺ Open the machine.
ĺ Pull the stainless steel cover forwards and off and then pull the dispensing unit off.
ĺ Press the button under the handle of the brew unit and, whilst doing so, turn the handle clockwise .
ĺ Carefully pull the brew unit out of the coffee machine.
When you have removed the brew unit, do not change the position of the handle on the brew unit.
ĺ Twist upper section with the holder for the milk pipework and pull it off.
Then pull Y-shaped piece off. Release spouts .
ĺ Clean all parts thoroughly.
ĺ Clean the surfaces of the central spout with a damp cloth.
Tip: if necessary clean the milk pipework under running water with the brush supplied.
ĺ Reassemble the dispensing unit. Push the spouts firmly back onto the dispensing unit.
ĺ Wipe any remaining coffee off the filters
(see arrows). One filter is located in the funnel and the other to the left of the funnel. ĺ Press the button under the handle on the brew unit and, whilst doing so, turn the handle anti-clockwise .
ĺ Turn the handle to the left to remove the ground coffee drawer.
ĺ Place the cleaning tablet in the integrated coffee scoop and push the ground coffee drawer into the ground coffee chute. Turn the handle to the right to close the ground coffee chute. ĺ Follow the further instructions given in the display.
Degreasing the brew unit
After 200 portions have been dispensed,
"Degrease the brew unit" will appear in the display. This message will not go out until the brew unit has been degreased.
You need 1 Miele cleaning tablet to degrease the brew unit. The process takes approx. 12 minutes.
The cleaning process cannot be cancelled once it has started. The process has to be carried through to the end.
ĺ Select
"Maintenance"
from the main menu and then
"Degrease the brew unit"
.
The maintenance programme will then start.
ĺ Follow the instructions in the display.
Tips for use
Drinks parameters
You can set the amount of coffee, the brewing temperature and pre-brewing for each drink individually.
ĺ Select "
Process"
from the drinks menu using the arrow sensor.
ĺ Touch "
Change drink"
and select a drink.
ĺ Touch "
Drink parameters
".
ĺ Select "
Amount of coffee
", "
Brew temperature
" or "
Pre-brewing
".
ĺ Select the setting you want and touch
"
OK"
.
ĺ Touch "
OK
" again to save your changed settings.
Portion size
You can adjust the amount of water for all coffee drinks, hot water and all types of tea.
For coffee drinks with milk you can also set the amount of milk or milk froth to suit your personal taste.
ĺ Place the cup you want under the central spout or hot water spout.
ĺ Select "
Process
" with the arrow sensor.
ĺ Touch "
Change drink
" and select a drink.
ĺ Touch "
Portion size
".
The drink will be made and "
Save
" will appear in the display as soon as the minimum dispensing amount is reached.
ĺ When the cup is filled to the level you want, touch "
Save
".
If you want to change the portion size for coffee drinks made with milk or hot water, the ingredients (components) which make up the drink will be saved one after the other while the drink is being made.
Profiles
You can save frequently made drinks in a profile with your own individual settings
(see "Profiles").
ĺ Select "
Profiles
" from the main menu.
Creating a profile ĺ Select "
Create Profile
".
ĺ Enter the name you want (max. 8 characters) and then touch " Save ".
Processing profiles
When you have created at least one profile you can choose from the following options under "
Process
":
– Change name
– Delete profile
– Change profile
Creating and processing drinks in a profile ĺ Touch "
Create drink"
and select a drink.
ĺ Change the portion size or drink parameters.
ĺ Enter a name for the new drink
(maximum 8 characters) and touch
" Save ".
When you have created at least one drink you can choose from the following options under "
Process drink
" :
– Change drink
(portion size, drink parameters and name)
– Delete drink
Expert mode
In Expert mode you can change the
amount of coffee and the portion size while the drink is being made.
The setting will not be saved and will only apply for the current drink.
Activate Expert mode from the "
Settings
" menu.
The parameters can only be changed when the respective ingredient is being processed while the drink is being made.
Grinding
DoubleShot Cancel ĺ Touch the segments and adjust the indicator (small triangle) as you wish.
Option
Language
Time
Date
Timer
Expert mode
Eco mode
Descaling
Lighting
Info
System lock
Water hardness
Brightness
Volume
Cup heating
Spout adjustment
Service
Settings
Changing settings
ĺ Touch .
ĺ Select "
Settings
".
ĺ Select the option you want and change the setting as required. ĺ Touch "
OK
" to save the setting.
Tip: touch to return to the previous menu.
Factory default
Available settings
Deutsch, English and other languages
Country
Show (Off / On / Night dimming)
Clock format (12 h / 24 h)
Timer 1 (Switch on at, Switch off at,
Switch off after)
Timer 2 (Switch on at, Switch off at)
On / Off
On / Off
Descaling method ( automatic/ manual)
Brightness
(Machine switched on or switched off)
Switch off after
On / Off
Soft, Medium, Hard, Very hard
Buzzer tones
Keypad tones
On / Off
On / Off
Evaporate
Demo mode
Notes
If you select the wrong language by mistake, you can easily find the
Language option by following the flag symbol .
Your choice of display will affect the energy consumption of your coffee machine. Information about this will appear in the display.
For "Switch on at" and "Switch off at", the timer must be activated and at least one day of the week must be allocated.
If you select "
Automatic descaling
" the "
Start time
" will be displayed.
When the system lock is activated, the "Switch on at" option for the timer cannot be selected.
The water hardness level only needs to be set for manual descaling.
The height of the central spout cannot be adjusted manually.
The "
Evaporate
" function removes water from the system and should be used if the machine is not going to be used for a long period of time or has to be moved.
Demo mode is intended for use in showrooms or at exhibitions. Do not activate this setting for domestic use!
The following settings will not be reset: Language, Time, Date, Number of drinks dispensed or
Descaling method.
Quick Start Guide
Coffee machine
These short instructions are not a substitute for the operating instructions supplied with the machine. It is essential to read the operating and installation instructions to familiarise yourself with how to use the coffee machine before using it for the first time. Please pay particular attention to the Warning and Safety instructions.
en - GB
M.-Nr. 10 315 270
Operation
Touch display
Drinks
Profiles
Selecting or acessing a menu
Scrolling ĺ Touch the field you want with your finger.
ĺ Touch the or arrows with your finger to scroll to the left or to the right.
Exiting a menu ĺ Touch .
Entries made before this which have not been confirmed with "OK" will not be saved.
Entering numbers
Use the numerical keypad to enter numbers.
ĺ Touch the numbers you want.
When you enter a valid number, the "OK" field will light up green.
ĺ Use the arrow to delete the last entered number.
ĺ Touch "OK".
Entering letters
Names are entered using a keyboard. It is best to select short names.
ĺ Touch the letters or characters you want.
ĺ Touch "
Save
".
Drinks overview
Coffee drinks
– Ristretto . Ristretto is a concentrated, strong espresso. It is made with the same quantity of ground coffee as for an espresso, but with very little water.
– Espresso . This is a strong aromatic coffee with a thick hazelnut brown coloured froth - known as the crema - on top.
– Coffee . This differs from espresso by the increased amount of water and the roast of the beans.
– Long coffee. This a coffee with considerably more water.
– Long black. This is made with hot water and two shots of espresso.
– Caffè Americano. This consists of equal proportions of espresso and hot water. The espresso is made first, then the hot water is dispensed.
Making coffee with milk
– Cappuccino . This consists of approx. 2/3 milk froth and 1/3 espresso.
– Latte macchiato . This consists of
1/3 each of hot milk, milk froth and espresso.
– Caffè latte . This is made with coffee and hot milk.
– Cappuccino italiano. This has the same proportion of milk froth and espresso as a cappuccino, but the espresso is added first and then the milk froth.
– Espresso macchiato. This is an espresso with a small amount of milk froth on top.
– Flat white. This is an espresso with milk froth.
– Café au lait . This is an espresso with slightly hotter milk.
Tea
(hot water at the optimum temperature)
– Green tea
– Herbal tea
– Fruit tea
– Black tea
Other drinks
– Hot milk
– Milk froth
– Hot water
Guide to the machine
On/Off sensor
"Back" sensor
Touch display
Cup heating
Water container
Coffee bean container
Park position for milk pipework
Grinder setting
Ground coffee drawer with integrated coffee scoop
Brew unit
Height-adjustable central spout with lighting and hot water spout
Master switch
Drip tray with lid and waste container
Lower panel with drip tray cover
Stainless steel milk flask
Cover
Descaling cartridge holder
Adapter
Miele descaling cartridge
See "Automatic descaling" in the operating instruction manual for information about descaling the machine.
Preparing for use
Filling the water container
Change the water in the water container every day.
Making drinks
To make a drink Making two portions
To fill two cups at the same time:
Using the milk flask
The stainless steel flask keeps milk cool for longer. Good milk froth can only be made with cold milk (< 10 °C).
Making tea
Hot water is heated to the optimum temperature for green tea, herbal tea,
fruit tea and black tea.
ĺ Place the tea filter or the tea bag in the tea cup.
ĺ Fill the water container with fresh, cold tap water up to the "Max." marker.
Filling the coffee bean container
Only put roasted coffee beans in the container. ĺ Fill the container with roasted coffee beans. ĺ Place a cup under the central spout.
ĺ Select a drink.
Drinks menu symbols:
Ristretto
Espresso
Coffee
Cappuccino
Latte macchiato
Caffè Latte
Cancelling preparation
ĺ Touch " Stop " or " Cancel ".
DoubleShot
With the
"DoubleShot" function two portions of coffee beans are ground and brewed for the same amount of water.
This makes a particularly strong and aromatic coffee.
DoubleShot ĺ Touch "
DoubleShot
" whilst making your coffee.
ĺ Place a cup under each of the coffee dispensers in the central spout.
ĺ Touch .
ĺ Select the drink.
Make sure that the slanted end of the stainless steel tube is pointing downwards.
ĺ Fill the flask with milk up to a maximum of 2 cm below the rim.
ĺ Place the cup under the hot water spout.
ĺ Select the type of tea you want.
Hot water will be dispensed into the cup.
ĺ Remove the tea filter or tea bag when the desired brewing time has elapsed.
ĺ Place the milk flask next to the coffee machine. Connect the milk tube to the aperture in the central spout.
The milk tube is easier to fit with the central spout in the maintenance position.
ĺ Touch for three seconds.
Cleaning and care
Please observe the detailed information on cleaning and care in the operating instructions. Clean the coffee machine every day after use.
Recommended frequency
Every day
(at the end of the day)
Once a week
(more often if heavily soiled)
Once a month
When prompted
What do I have to clean / maintain?
– Milk flask
– Water container
– Waste container
– Drip tray and grille
– Cup sensor
– Central spout
– Brew unit
– Area underneath the brew unit
– Casing
– Coffee bean container
– Ground coffee chute and Ground coffee drawer
– Water container filter (or as required)
– Milk pipework
– Degrease the brew unit
(using cleaning tablets)
– Descale the machine
(if set to "
Manual descaling"
)
Cleaning by hand or in the dishwasher
Clean the following by hand only:
– Stainless steel central spout cover
– Cup sensor
– Brew unit
– Bean container lid
– Stainless steel milk flask
– Lower panel
The following can be cleaned in the dishwasher:
– Drip tray and lid
– Drip tray cover
– Waste container
– Water container
– Central spout
(without stainless steel cover)
CM7500 en – GB 3415 M.-Nr. 10 315 270 / 00

Download
Advertisement
Key features
Prepare various coffee drinks
Save favorite drink settings in profiles
Height-adjustable central spout
Milk frother
Double shot function
Frequently asked questions
You can adjust the amount of coffee, brewing temperature, and pre-brewing for each drink individually. To do so, select "Settings ", then "Change drink" and choose the desired drink. You can then adjust the "Amount of coffee" setting and confirm with "OK".
To clean the brew unit, you need a Miele cleaning tablet. Select "Maintenance" from the main menu, and then "Degrease the brew unit." Follow the instructions displayed.
To create a profile, select "Profiles" from the main menu and then "Create Profile". Enter the desired name (max. 8 characters) and touch "Save". Then, select the drink you want from the "Process drink" menu. Adjust the portion size or drink parameters as needed. Touch "OK" to save the setting.