fi- Getting Started 5015C

fi- Getting Started 5015C
P3PC-1582-06EN
fi-5015C Image Scanner
Getting Started
Thank you for purchasing the fi-5015C Color Scanner.
This document describes how to use fi-5015C and basic operation methods. Before you start using fi-5015C be sure to
thoroughly read this manual to ensure correct use.
The "Operator’s Guide" stored on the Setup DVD Rom provides useful and detailed information on Operations when
you would like to use advanced features, Daily Care for maintenance of the scanner, and Replacing Consumables to
maintain conditions for smooth scanning. Please also read the Operator’s Guide for further information.
Microsoft, Windows, Windows Server, Windows Vista, and SharePoint are either registered trademarks or trademarks
of Microsoft Corporation in the United States and/or other countries.
ISIS is a registered trademark or trademark of EMC Corporation in the United States.
Other company names and product names are the registered trademarks or trademarks of the respective companies.
March, 2013
© PFU LIMITED 2006-2013
How Trademarks Are Indicated In
This Manual
Windows
Server 2008
Windows Server® 2008
Standard (32/64-bit),
Windows Server® 2008 R2
Standard
Windows 7
Windows® 7 Home Premium
operating system (32/64-bit),
Windows® 7 Professional
operating system (32/64-bit),
Windows® 7 Enterprise
operating system (32/64-bit),
Windows® 7 Ultimate operating
system (32/64-bit)
Windows
Server 2012
Windows Server® 2012
Standard (64-bit)
Windows 8
Windows® 8 operating system
(32/64-bit),
Windows® 8 Pro operating
system (32/64-bit),
Windows® 8 Enterprise
operating system (32/64-bit)
References to operating systems (OS) are
indicated as follows:
Windows 2000
Windows® 2000 Professional
operating system
Windows XP
Windows® XP Home Edition
operating system,
Windows® XP Professional
operating system (32/64-bit)
Windows
Server 2003
Windows Server® 2003,
Standard Edition (32/64-bit),
Windows Server® 2003 R2,
Standard Edition (32/64-bit)
Windows Vista
Windows Vista® Home Basic
operating system (32/64-bit),
Windows Vista® Home Premium
operating system (32/64-bit),
Windows Vista® Business
operating system (32/64-bit),
Windows Vista® Enterprise
operating system (32/64-bit),
Windows Vista® Ultimate
operating system (32/64-bit)
Where there is no distinction between the different
versions of the above operating system, the
general term "Windows" is used.
1
About Maintenance
Screen Examples In This Manual
The user must not perform repairs on this scanner.
Contact the store where you purchased the scanner
or an authorized FUJITSU Image Scanner service
provider to make repairs to this product.
The screen examples in this manual are subject to
change without notice in the interest of product
improvement. If the actual displayed screen
differs from the screen examples in this manual,
operate by following the actual displayed screen
while referring to the User's Manual of the
scanner application you are using.
The screen examples used in this manual are of
the TWAIN driver, ISIS driver, and ScandAll PRO
(image scanning application).
Safety Precautions
The attached "Safety Precautions" manual
describes important details for users to use this
product safely and correctly. Read the Safety
Precautions thoroughly before you start using this
product.
Warning Indications Used In This
Manual
WARNING
CAUTION
This indication alerts operators to an
operation that, if not strictly
observed, may result in severe injury
or death.
This indication alerts operators to an
operation that, if not strictly
observed, may result in safety
hazards to personnel or damage to
equipment.
Symbols Used In This Manual
ATTENTION
HINT
This symbol alerts operators to particularly
important information. Be sure to read this
information.
This symbol alerts operators to helpful
advice regarding operation.
Warning Label
The glass surface inside the ADF becomes hot
during the operation. Be careful not to touch the
glass surface inside the ADF.
ATTENTION
Do NOT remove, stain or scratch the
warning labels from the scanner.
2
Chapter1
PREPARING THE SCANNER
1.1 Checking the Contents of the Scanner Package
Make sure that all items shown below are included in the package.
If any parts are missing or defective, contact your scanner dealer or an authorized FUJITSU scanner service provider.
Handle the scanner and accessories with care.
Scanner (x1)
ADF paper chute (x1)
Extension (x1)
Document stopper
(x1)
AC cable
(The contents may vary depending on the country and the
model purchased.)
AC adapter (x1)
USB cable (x1)
SETUP DVD-ROM (x1)
Safety Precautions (x1)
PAD-ASSY (x1)
3
Chapter2
INSTALLATION OF THE SCANNER
2.1 Installing the Scanner Application
For scanning documents with this scanner, both scanner driver and image capturing application software (called "application" hereafter) must be installed on your PC.
The following scanner drivers and applications are provided:
• Scanner Driver:
TWAIN Scanner Driver
ISIS Scanner Driver
• Scanning application:
ScandAll PRO (For TWAIN driver/ISIS driver)
Install the appropriate scanner driver for the application you will use. The following sections describe installation of
each driver and application.
ATTENTION
Please install the scanner driver before connecting the scanner to your PC.
If you connect the scanner before installing the scanner driver, the scanner will not operate correctly.
If you have connected the scanner beforehand, the "Found New Hardware Wizard" screen appears (this screen
might differ slightly according to the used OS) . On this screen, click the [Cancel] button to close the Wizard
screen and install the scanner driver first.
4
3. Click [INSTALL], and then click [TWAIN
Driver].
For TWAIN Scanner Driver
■ Preparation
Confirm the following items before installing the application.
• Take out the Setup DVD-ROM from its
package, but do not insert the Setup DVDROM into the DVD driver yet.
• Uninstall any older version of TWAIN driver
if already installed.
ATTENTION
4. Error Recovery Guide Installation window
appears.
Error Recovery Guide is a software that displays troubleshooting information on screen
when any scanner error occurs. Although this
software’s installation is highly recommended,
it can be installed later if you do not install it in
this step.
Uninstall [Scanner Utility for Microsoft Windows] from [Add/Remove Programs] of the
control panel.
■ Installing the TWAIN Scanner
Driver
ATTENTION
Windows XP screenshots are used in this
section as examples. The windows and
operations may slightly vary depending on
your OS.
ATTENTION
1. Turn on your PC and log on to Windows.
ATTENTION
Be sure to log on as a user with "Administrator" privileges.
5. Select a language used for installation on
[Choose Setup Language] window and click
[Next].
2. Insert the Setup DVD-ROM into the DVD drive.
6. Follow the instructions on the window to install
the application.
⇒ <SETUP DICS START UP SCREEN> appears.
ATTENTION
When you select [Yes] for installing the
Error Recovery Guide, [Choose Setup
Language] window appears. Select a language and follow the instructions on the
window. Error Recovery Guide will automatically continue finishing its installation.
Please wait until the installation of TWAIN
driver automatically starts.
7. When the [InstallShield Wizard Complete] window appears, click [Finish].
This screen may not appear when the
"Autoplay" setting of your PC is OFF. In
this case, run "AutoPlayer.exe" in this
DVD-ROM directly from the "Explorer" or
"My Computer".
Your computer will be restarted.
Do not remove the Setup DVD-ROM from the DVD
drive until your PC has completely restarted.
Installation of the scanner driver is completed.
5
ATTENTION
For ISIS Scanner Driver
Depending on the operating system you are
using, you may need to do the following.
Windows 2000:
If you see the [Digital Signature not
Found] dialog box, click the [Yes] button.
Windows Vista:
If you see the [Found New Hardware] dialog box, select [Locate and install driver
software], and then in the [User Account
Control] dialog box, click the [Continue]
button, if it is displayed.
■ Preparation
Take out the Setup DVD-ROM from its package, but do
not insert the Setup DVD-ROM into the DVD drive yet.
■ Installing the ISIS Scanner Driver
ATTENTION
■ Installing ScandAll PRO/Scan to
Microsoft SharePoint
ScandAll PRO is software for scanning images, which is
in compliance with both TWAN/ISIS standards. Using
TWAIN or ISIS together with ScandAll PRO allows you
to create document images.
Scan to Microsoft SharePoint is an application that
allows you to upload your files easily from ScandAll
PRO to a SharePoint site. Can be installed together with
ScandAll PRO.
ATTENTION
1. Press the power button to turn on the scanner.
2. Turn on your personal computer, and then log
on to Windows.
ATTENTION
Be sure to log on as a user with "Administrator" privileges.
Be sure to log on as a user with "Administrator" privileges.
3. When the scanner is automatically detected,
[Found New Hardware Wizard] or [Add/
Remove Hardware Wizard] dialog box will
appear. Click the [Cancel] button to close the
Wizard dialog box.
1. Insert the Setup DVD-ROM into the DVD drive.
⇒ <SETUP DICS START UP SCREEN> appears.
4. Insert the "Setup DVD-ROM" into the DVD
drive.
2. Click [INSTALL], and then click [ScandAll
PRO].
⇒ <SETUP DICS START UP SCREEN> appears.
3. Select a language for the installation on
[Choose Setup Language] dialog box, and then
click the [Next] button.
ATTENTION
4. Proceed with the installation, following the onscreen instructions.
5. When the [InstallShield Wizard Complete] dialog box appears, click the [Finish] button.
HINT
Windows XP screenshots are used in this
section as examples. The windows and
operations may vary slightly depending on
your OS.
For information about the features of ScandAll PRO, refer to Help topics in ScandAll
PRO.
6
The [SETUP DICS START UP SCREEN]
may not appear if the "AutoPlay" setting is
set to off. In this case, find
"AutoPlayer.exe" in the DVD-ROM using
"Explore" or "My Computer" and execute
it.
5. Click [INSTALL], and then click [ISIS Driver].
ATTENTION
Depending on the operating system you
are using, you may need to do the following.
Windows 2000:
If you see the [Digital Signature not
Found] dialog box, click [Yes].
Windows Vista:
If you see the [Found New Hardware] dialog box, select [Locate and install driver
software], and then in the [User Account
Control] dialog box, click the [Continue]
button, if it is displayed.
6. Error Recovery Guide Installation dialog box
appears.
Error Recovery Guide is an application with
which you can view on-screen information for
troubleshooting errors that may occur in the
scanner. This guide helps solve problems, so
select [Yes] to install it. You may also choose
to install it later.
ATTENTION
Software Operation Panel
You can configure settings related to scanning and manage consumables using the Software Operation Panel. It
is installed together with TWAIN driver/ISIS driver.
Error Recovery Guide
After you select [Yes] for installing Error
Recovery Guide, the [Choose Setup Language] dialog box appears. Select a language and follow the on-screen
instructions. The Error Recovery Guide
dialog box is automatically displayed when
the installation is complete. Wait until the
installation of the ISIS starts.
Error Recovery Guide is a software that displays troubleshooting information on screen if any scanner error
occurs.
If you did not install together the Error Recovery Guide
with the driver, please proceed with the procedures
given below for installing it.
1. Insert the Setup DVD-ROM into the DVD drive.
7. Select a language for the installation on the
[Choose Setup Language] dialog box, and then
click the [Next] button.
⇒ <SETUP DICS STARTUP SCREEN> appears.
2. Click [INSTALL].
8. Install the driver, following the on-screen
instructions.
3. Click [Error Recovery Guide] on the next
screen.
9. When you see the [InstallShield Wizard Complete] dialog box, click the [Finish] button.
4. Select a language to use for the installation in
the <Choose Setup Language> window and
click [OK].
Your computer will restart and detect the scanner. Do
not remove the Setup DVD-ROM from the DVD drive
until your personal computer completely starts up again.
5. Install the application following the instructions
in the window.
6. When the [InstallShield Wizard Complete]
screen displays, click [Finish].
7
• When uninstalling Image Processing Software Option,
select "Image Processing Software Option"
• When uninstalling Software Operation
Panel,
select "Software Operation Panel".
Image Processing Software Option
(Trial)
For details on the installation of the Image Processing
Software Option, refer to the "Image Processing Software Option USER’S GUIDE".
5. Click the [Change/Remove] or [Remove] button.
■ Uninstalling Supplied Programs
6. When the confirmation dialog box appears,
Click the [OK] or [Yes] button.
Follow the procedure below to uninstall supplied programs.
⇒ This executes the uninstallation.
Windows XP screenshots are used in this
section. The windows and operations may
slightly vary depending on your OS.
HINT
ATTENTION
Screen displays may vary slightly according to the operation system (OS) you are
using. Follow the on screen instructions of
the OS.
Examples
In Windows 2000, the window and button
names described above are as follows:
• [Add or Remove Programs] -> [Add/
Remove Applications]
1. Start up your PC.
ATTENTION
Be sure to log on as a user with "Administrator" privileges.
• The [Change/Remove] button -> The
[Add/Remove] button
In Windows Vista, the window and button
names described above are as follows:
• [Uninstall or Change a program] ->[Uninstall or Change]
2. Exit all currently running programs.
3. Select [Control Panel] - [Add or remove Programs] from the [Start] menu.
⇒ This displays the "Add or remove Programs"
screen which displays a list of the currently
installed applications.
4. Select the application to uninstall.
• When uninstalling TWAIN scanner driver,
select "Scanner Utility for Microsoft Windows".
• When uninstalling ScandAll PRO,
select "Fujitsu ScandAll PRO". After ScandAll
PRO, you can also remove Scan to Microsoft
SharePoint.
• Microsoft SharePoint: [Scan to Microsoft
SharePoint]
• When uninstalling ISIS scanner driver,
select "ISIS Driver Bundle Installer for fi
Series Scanners".
• When uninstalling Error Recovery Guide,
select "Error Recovery Guide".
8
2.2 Installing the Scanner
After the computer has been restarted, connect the scanner.
1. Place the scanner at its installation site.
For details on the scanner's dimensions and
required installation space, refer to "fi-5015C
Operator’s Guide" "Appendix A Installation
Specifications" in the Setup DVD-ROM.
2. Unlock the shipping lock
The carrier unit inside the scanner is fixed in
place by the shipping lock to prevent the scanner
from becoming damaged during transportation
from factory.
After transporting and placing the scanner, release
the shipping lock.
Screw
5. Connect the AC adapter.
ATTENTION
Use only the AC adapter provided by the
manufacturer.
1) Connect the AC cable to the AC adapter.
3. Installation of the ADF paper chute, Extension
and Document stopper.
2) Connect the AC adapter connector to the
scanner’s DC inlet.
Attach Extension to ADF paper chute, and then
mount it on the scanner; attach Document stopper
to the scanner.
ADF paper chute
Extension
Document stopper
3) Plug the AC cable into the outlet.
HINT
4. Connect the ADF cable to the ADF cable connector on the scanner, and secure it with
screws.
9
The Function Number Display and the LED
may flash for an instant when plugging the
AC cable into the outlet.
2.3 Connecting the Scanner to
Your PC
2.4 Confirming Installation
This section explains how to check the operation of the
installed scanner driver by using ScandAll PRO.
Make sure that the scanner driver is installed properly,
following the procedure below.
Follow the procedure below to connect the USB cable.
1. Connect the USB interface cable to the USB
interface connector.
■ Checking the Operation of the
Scanner Driver
1. Load the document on the scanner.
2. Launch ScandAll PRO.
From the [start] menu, select [All Programs] ->
[Fujitsu ScandAll PRO] -> [ScandAll PRO].
⇒ ScandAll PRO starts up.
2. Connect the other end of the USB interface
cable to the PC.
ATTENTION
3. In ScandAll PRO, select [Tool] on the menu,
and then select [Preferences].
⇒ The [Setup] dialog box appears.
• Be sure to use the USB cable which
•
•
comes as an accessory with this scanner. Correct operation with commercially
available cables is not guaranteed.
When connecting to an USB hub, use
the first stage USB hub that is closest to
the computer. If you use the second or
later hub stages, the scanner may not
operate correctly.
If you connect the scanner with USB 2.0,
it is required that the USB port and Hub
are compliant with USB 2.0. The scanning speed may slow down if it is connected with USB1.1.
4. On the [Scan] tab, select a driver.
To check the operation of TWAIN, select
[TWAIN].
To check the operation of ISIS, select [ISIS].
5. Click the [OK] button to close the [Setup] dialog
box.
6. In ScandAll PRO, select [Scan] on the menu,
and then select [Select Scanner].
7. Select a scanner in the displayed dialog box.
To use TWAIN:
Select [FUJITSU fi-5015C], and then click the
[Select] button.
To use ISIS:
Select [Fujitsu fi-5015C] and then click the
[Select] button.
3. Press the "I" side of the main power switch to
turn on the scanner.
4. Press the power button to turn ON the scanner.
Your scanner will be automatically detected.
For Windows 2000:
When [Digital Signature not Found] appears,
click [Yes].
8. Select [Scan] on the menu, and then select
[Scan Settings].
The installation of the scanner is completed.
10
12. Click the [Scan] button.
9. In the [Scan Settings] dialog box, clear the
[Save to file] checkbox.
HINT
When you are using TWAIN, you may see
the TWAIN Driver setup dialog box again. If
so, click the [Scan] button on the dialog
box.
⇒ The document is scanned and the scanned image
is displayed in the [ScandAll PRO] window.
If the scanned document image is displayed in the window, it means that the scanner driver is installed properly.
You only check the operation now, so you
do not have to save to file.
HINT
10. Click [Scanner Settings].
⇒ A setup dialog box appears for you to configure
scanner driver settings.
11. Configure scanner settings such as the resolution and paper size.
To use TWAIN
On the dialog box below, configure scan settings,
and then click the [OK] button.
To use ISIS
On the dialog box below, configure scanning settings, and then click the [OK] button.
⇒ You are returned to the [Scan Settings] dialog
box.
11
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement