Chauvet 15090388 Work Light User Manual

User Manual
TABLE OF CONTENTS
1. Before You Begin ................................................................................. 3
What Is Included ............................................................................................... 3
Unpacking Instructions ...................................................................................... 3
Claims ........................................................................................................................ 3
Text Conventions .............................................................................................. 3
Icons .................................................................................................................. 3
Document Information ....................................................................................... 3
Product at a Glance .......................................................................................... 4
Safety Notes ...................................................................................................... 4
2. Introduction .......................................................................................... 5
Product Overview .............................................................................................. 5
Product Dimensions .......................................................................................... 5
3. Setup ..................................................................................................... 6
AC Power .......................................................................................................... 6
Fuse Replacement ..................................................................................................... 6
Mounting ........................................................................................................... 7
Orientation ................................................................................................................. 7
Rigging ....................................................................................................................... 7
4. Operation .............................................................................................. 8
Control Panel Operation.................................................................................... 8
Menu Map ......................................................................................................... 8
Configuration (DMX) ......................................................................................... 8
Starting Address......................................................................................................... 8
Configuration (Standalone) ............................................................................... 9
Sound Active Mode .................................................................................................... 9
Automatic Mode ......................................................................................................... 9
DMX Channel Assignments and Values ......................................................... 10
8-CH ......................................................................................................................... 10
5. Technical Information........................................................................ 11
General Troubleshooting ................................................................................ 11
Contact Procedure .......................................................................................... 12
CHAUVET® Contact Information .................................................................... 12
Returning Products to CHAUVET® ................................................................ 12
6. Technical Specifications ................................................................... 13
Page 2 of 13
MotionDrape™ LED User Manual (Rev. 05)
1. BEFORE YOU BEGIN
What Is
Included
·
·
·
·
·
1 x MotionDrape™ LED
1 x MotionDrape™ Controller
1 x Power Cord
1 x Signal Cable
1 x Carrying Bag
·
·
·
·
Replacement LEDs
Reusable Zip Ties (Tie Wraps)
1 x Warranty Card
1 x Quick Reference Guide
Unpacking
Instructions
Immediately upon receipt, carefully unpack this product and check the container to make
sure you have received all the parts indicated above in good condition.
Claims
If the container or the material inside the container (this product and any other accessory
included) appears damaged from shipping, or shows signs of mishandling, notify the
carrier immediately, not CHAUVET®, upon receipt of the damaged merchandise. Failure
to do so in a timely manner may invalidate your claim with the carrier. In addition, retain
the container and all the packing material for inspection.
For other issues such as missing components or parts, damage not related to shipping,
or concealed damage, file a claim with CHAUVET® within seven (7) days of receiving
the merchandise.
Text
Conventions
Icons
Convention
1~512
50/60
Settings
Menu > Settings
<ENTER>
ON
Icon
Meaning
A range of values
A set of values of which only one can be chosen
A menu option not to be modified
A sequence of menu options to be followed
A key to be pressed on the product’s control panel
A value to be entered or selected
Meaning
This paragraph contains critical installation, configuration, or
operation information. Failure to comply with this information may
render the product partially or completely inoperative, cause
damage to the product, or cause harm to the user.
This paragraph contains important installation or configuration
information. Failure to comply with this information may prevent
the product from functioning correctly.
This paragraph reminds you of useful, although not critical,
information.
Document
Information
The information and specifications contained in this document are subject to change
without notice. CHAUVET® assumes no responsibility or liability for any errors or
omissions that may appear in this manual. CHAUVET® reserves the right to update the
existing document or to create a new document to correct any errors or omissions.
You can download the latest version of this document from www.chauvetlighting.com.
© Copyright 2012 CHAUVET®. All rights reserved.
Electronically published by CHAUVET® in the United States of America.
Author
Date
Editor
Date
A. Diaz
2/13/12
S. Graham
2/13/12
MotionDrape™ LED User Manual (Rev. 05)
Page 3 of 13
Product at a
Glance
Use on Dimmer
Outdoor Use
Sound Activated
DMX
Master/Slave
Safety Notes
Auto Programs
Auto-ranging Power Supply
Replaceable Fuse
User Serviceable
Duty Cycle
P
P
P
x
x
Please read the following Safety Notes carefully before working with this product. They
include important safety information about its installation, usage, and maintenance.
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
Page 4 of 13
x
x
P
P
P
Always connect this product to a grounded circuit to avoid the risk of electrocution.
Always disconnect this product from the power source before cleaning it or replacing
the fuse.
Avoid direct eye exposure to the light source while the product is on.
Make sure the power cord is not crimped or damaged.
Never disconnect this product from power cord by pulling or tugging on the cord.
Make sure there are no flammable materials close to the unit while operating.
Do not touch this product’s housing when operating because it may be very hot.
Always make sure that the voltage of the outlet to which you are connecting this
product is within the range stated on the decal or rear panel of the product.
This product is for indoor use only! (IP20) To prevent risk of fire or shock, do not
expose this product to rain or moisture.
Always install this product in a location with adequate ventilation, at least 20 in (50
cm) from adjacent surfaces.
Be sure that no ventilation slots on the unit’s housing are blocked.
Never connect this product to a dimmer.
Make sure to replace the fuse with another of the same type and rating.
Never carry this product from the power cord or any moving part.
The maximum ambient temperature (Ta) is 104° F (40° C). Do not operate this
product at higher temperatures.
In the event of a serious operating problem, stop using the unit immediately.
Never try to repair this product. Repairs carried out by unskilled people can lead to
damage or malfunction. Please contact the nearest authorized technical assistance
center.
·
This product is NFPA-certified fire retardant material.
·
Keep this User Manual for future consultation. If you sell this product to another user,
be sure that they also receive this document.
MotionDrape™ LED User Manual (Rev. 05)
2. INTRODUCTION
Product Overview
Front Panel
Button Menu
LED Display
Power In
Fuse holder
On/Off Switch
Top Panel
Curtain Input
DMX Out
DMX In
Product Dimensions
MotionDrape™ LED User Manual (Rev. 05)
Page 5 of 13
3. SETUP
AC Power
This product has an auto-ranging power supply and can work with an input voltage
range of 100~240 VAC, 50/60 Hz.
To determine the power requirements for this product (circuit breaker, power outlet, and
wiring), use the current value listed on the label affixed to the product’s back panel, or
refer to the product’s specifications chart. The listed current rating indicates the
product’s average current draw under normal conditions.
Always connect this product to a protected circuit (circuit breaker or fuse),
making sure that it has an appropriate electrical ground to avoid the risk of
electrocution or fire.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even
if the rheostat or dimmer channel serves only as a 0 to 100% switch.
Fuse
Replacement
Follow the instructions below to change the fuse, if necessary.
Disconnect this product from the power outlet before replacing the fuse.
1. Wedge the tip of a flat head screwdriver into the slot of the fuse holder and pry out of
its housing.
2. Remove the blown fuse from its holder and replace with a fuse of the exact same
type and rating.
3. Insert the fuse holder back into place, and reconnect power.
Installed fuse
(held by plastic clip)
Safety cap
Spare fuse holder
(inside safety cap)
This product ships with no spare fuse. The safety cap does have room for a spare.
Always replace a blown fuse of the same type and rating.
Page 6 of 13
MotionDrape™ LED User Manual (Rev. 05)
Mounting
Before mounting this product, read and follow the safety recommendations indicated in
the Safety Notes section (page 2 of this manual).
Orientation
The MotionDrape™ LED may be mounted in any position; however, make sure
adequate ventilation is provided around the product.
Rigging
Before deciding on a location for this product, always make sure that it will be easy to
access the unit for maintenance and programming purposes.
Make sure that the structure onto which you are mounting this product can support its
weight. Please see the Technical Specifications section of this manual for weight
information.
Mount the product securely to a rigging point, whether an elevated platform or a truss.
Reusable zip ties (tie wraps) are provided with the MotionDrape™ LED for quick and
easy mounting.
This product can be used with the CHAUVET® CH-31 portable truss or any similar
portable trussing system.
Grommets for easy truss
Text
here and various
mounting
stand applications
Mounting Diagram
MotionDrape™ LED User Manual (Rev. 05)
Page 7 of 13
4. OPERATION
Control Panel
Operation
To access the control panel functions, use the four buttons located underneath the
display. Please refer to the Product Overview (page 5) to see the buttons location on the
control panel.
Button
<MENU>
Press to find an operation mode or to back out of the current menu
option
<ENTER>
Press to activate a menu option or a selected value
<UP>
<DOWN>
Menu Map
Function
Press to scroll up the list of options or to find a higher value
Press to scroll down the list of options or to find a lower value
Mode
Programming Steps
Version
Software Version
Automatic
Sound
DMX Mode
Program
Configuration
(DMX)
Starting Address
Page 8 of 13
Shows the software version number
NO
Disables unit’s auto mode function
YES
Enables unit’s auto mode function
NO
Disables unit’s sound mode function
YES
Enables unit’s sound mode function
NO
Disables unit’s DMX512 mode function
YES
1~512
Enables unit’s DMX512 mode and sets
starting address
Selects how fast the auto mode program
runs
1~9
Speed
Description
NO
Disables numbered program running in
sequence in auto or sound mode
YES
Enables numbered program running in
sequence in auto or sound mode
1~30
Set this product in DMX mode to control it with a DMX controller.
1. Connect this product to a suitable power outlet.
2. Turn this product on.
3. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket of this product.
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you
could restrict the access to some of the product’s channels.
The MotionDrape™ LED uses up to 8 DMX channels in its 8-channel DMX mode, which
defines the highest configurable address to 505.
If you are not familiar with the DMX protocol, you may refer to the DMX Primer section in
the Technical Information chapter.
To select the starting address, do the following:
1. Press <MENU> repeatedly until Dmx512 shows on the display.
2. Press <ENTER>.
3. Press <UP> to select Yes in the menu.
4. Press <ENTER>. Address should appear on the screen.
5. Use <UP> or <DOWN> to select the starting address.
6. Press <ENTER>.
MotionDrape™ LED User Manual (Rev. 05)
Configuration
(Standalone)
Set this product in one of the standalone modes to control it without a DMX controller.
1. Connect this product to a suitable power outlet.
2. Turn this product on.
Never connect a product that is operating in any standalone mode, whether Static,
Automatic, or Sound to a DMX string connected to a DMX controller. This is
because products in standalone mode may transmit DMX signals that could
interfere with the DMX signals from the controller.
Sound Active
Mode
To enable the Sound Active mode, do the following:
1. Press <MENU> repeatedly until Sound shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select Yes.
4. Press <ENTER>.
5. Turn the music on until the product responds to the beat of the music.
The product will only respond to low frequencies of the music (bass and drums).
Automatic Mode
To enable the Automatic Mode, follow the instructions below:
1. Press <MENU> repeatedly until Automatic shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select Yes.
4. Press <ENTER>.
MotionDrape™ LED User Manual (Rev. 05)
Page 9 of 13
DMX Channel Assignments and Values
8-CH
Page 10 of 13
Channel
Function
1
Dimmer
2
Strobe
3
4
5
Red
Green
Blue
6
Programs 1-15
7
Programs 16-30
8
Speed
Value
000 ó 007
008 ó 255
000 ó 010
011 ó 255
000 ó 255
000 ó 255
000 ó 255
000 ó 015
016 ó 031
032 ó 047
048 ó 063
064 ó 079
080 ó 095
096 ó 111
112 ó 127
128 ó 143
144 ó 159
160 ó 175
176 ó 191
192 ó 207
208 ó 223
224 ó 239
240 ó 255
000 ó 015
016 ó 031
032 ó 047
048 ó 063
064 ó 079
080 ó 095
096 ó 111
112 ó 127
128 ó 143
144 ó 159
160 ó 175
176 ó 191
192 ó 207
208 ó 223
224 ó 239
240 ó 255
000 ó 255
Setting
No function
0~100%
No function
0~100%
0~100%
0~100%
0~100%
No function
Falling Star
Diagonal Color Bands
Color Pattern Chase
Inward Arrow (L-R)
Color Stack
Multi-Color Freeway
Color Wave (L-R)
Color Wave (R-L)
Color Bar Chase (L-R)
Color Bar Chase (R-L)
Windmill
Fan
Whirlpool
Falling Snow
Multi Box Frenzy
No function
Center Burst
Outer Burst
EQ Effect
Rolling Color
Horizontal Stacking
Inner Zone
Outer Zone
Diamond Spread
Single Diamond Squeeze
Follow The Leader
Crisscross
X-Factor
Double Diamond Squeeze
Red X Factor
Multicolor Rain
0~100%
MotionDrape™ LED User Manual (Rev. 05)
5. TECHNICAL INFORMATION
General Troubleshooting
Symptom
Possible Cause(s)
Possible Action(s)
General low light intensity
Dirty LEDs
Clean the MotionDrape™ LED drape regularly
One LED in an LED group
failed
Faulty (shorted) LED
Replace faulty LED
Faulty (open) LED
Replace faulty LED
Faulty LED cable
Replace faulty LED cable
Faulty LED driver
Replace faulty LED Driver box
Faulty LED driver box
Replace faulty LED Driver box
Faulty drape output cable
Repair or replace faulty cable
Faulty MotionDrape™ LED controller
Replace MotionDrape™ LED controller
Faulty MotionDrape™ LED controller
Replace MotionDrape™ LED controller
If using DMX connection, wrong DMX address
on the corresponding controller
Set the starting DMX address correctly
All the LEDs in a group
failed
Single MotionDrape™ LED
controller: All LEDs in a
drape failed
Multiple MotionDrape™ LED If using proprietary serial link, wrong
Master/Slave setting on the corresponding
controllers: All LEDs on a
controller failed
controller
Breaker/Fuse keeps blowing
MotionDrape™ LED
controller does not power
up
MotionDrape™ LED controller not powered
Check power to the MotionDrape™ LED
controller
Faulty DMX cable
Repair or replace faulty cable
Excessive circuit load
Check total load placed on the electrical circuit
Short circuit along the power wires
Check for a short in the electrical wiring (internal
and/or external)
No power
Check for power on Mains
Faulty or lose power cord
Check power cord
Faulty internal power supply
Replace internal power supply
Wrong DMX addressing
Check DMX controller and product addressing
Product is not responding to Wrong polarity on the controller
DMX
Lose or damaged cables
Loss of signal on some
MotionDrape™ LED
controllers
Set the starting Master/slave mode correctly
Check polarity switch settings on the controller
Check DMX and signal patch cables
Faulty Main PCB
Replace Display PCB
Non compatible signal patch cables
Use only compatible cables
Bouncing signals
Install terminator as suggested
Long cable / Low level signal
Do not exceed maximum recommended length
Too many products
Install an optically coupled DMX splitter after unit
#32.
Interference from AC wires
Keep DMX and signal patch cables separated
from power cables or black lights
If you still experience problems after trying the above solutions, contact
CHAUVET® Technical Support.
MotionDrape™ LED User Manual (Rev. 05)
Page 11 of 13
Contact
Procedure
CHAUVET®
Contact
Information
In case you need to return a product or request support, follow the procedure below:
·
·
·
If you live in the U.S., contact CHAUVET® World Headquarters (see below).
If you live in the UK or Ireland, contact CHAUVET® Europe Ltd.(see below).
If you live in any other country, DO NOT contact CHAUVET®. Instead, contact your
distributor of record. Refer to our Web site for contact details of distributors outside
the U.S., United Kingdom, or Ireland.
World Headquarters
CHAUVET®
General Information
Address:
5200 NW 108th Avenue
Sunrise, FL 33351
Voice:
(954) 929-1115
Fax:
(954) 929-5560
Toll free:
(800) 762-1084
Technical Support
Voice:
(954) 929-1115 (Press 4)
Fax:
(954) 756-8015
Email:
tech@chauvetlighting.com
World Wide Web
www.chauvetlighting.com
United Kingdom & Ireland
CHAUVET® Europe Ltd.
General Information
Address:
Unit 1C
Brookhill Road Industrial Estate
Pinxton, Nottingham, UK
NG16 6NT
Voice:
+44 (0)1773 511115
Fax:
+44 (0)1773 511110
Technical Support
Email:
uktech@chauvetlighting.com
World Wide Web
www.chauvetlighting.co.uk
If you live outside the U.S., United Kingdom, or Ireland, contact your distributor of
record and follow their instructions on how to return CHAUVET® products to
them. Visit our website for contact details.
Returning
Products to
CHAUVET®
Call the corresponding CHAUVET® Tech Support office and request a Return
Merchandise Authorization (RMA) number before shipping the product. Be prepared to
provide the model number, serial number, and a brief description of the cause for the
return.
You must send the merchandise prepaid, in its original box, and with its original packing
and accessories. CHAUVET® will not issue call tags.
Clearly label the package with the RMA number. CHAUVET® will refuse any product
returned without an RMA number.
DO NOT write the RMA number directly on the box. Instead, write it on a properly
affixed label.
Before sending the product, clearly write the following information on a piece of paper
and place it inside the box:
· Your name
· Your address
· Your phone number
· The RMA number
· A brief description of the problem
Be sure to pack the product properly. Any shipping damage resulting from inadequate
packaging will be your responsibility. As a suggestion, proper UPS packing or doubleboxing is always a safe method to use.
CHAUVET® reserves the right to use its own discretion to repair or replace
returned product(s).
Page 12 of 13
MotionDrape™ LED User Manual (Rev. 05)
6. TECHNICAL SPECIFICATIONS
Dimensions and
Weight
Length (Drape)
9.8 ft (118 in)
3 m (3,000 mm)
Length (Control Box)
9.6 in (243 mm)
Width (Drape)
Height (Drape)
Weight (Drape)
Width (Control Box)
6.6 ft (78.7 in)
2 m (2,000 m)
Height (Control Box)
Weight (Control Box)
5.3 in (135 mm)
2 in (50 mm)
1.8 lbs (0.8 kg)
0.6 in (15 mm)
9.8 lbs (4.4 kg)
Note: Dimensions in inches and feet rounded to the nearest decimal digit.
Power
Power Supply Type
Range
Voltage Selection
Switching (internal)
100~240 V, 50/60 Hz
Auto-ranging
Parameter
120 V, 60 Hz
230 V, 50 Hz
Consumption
51 W
54 W
Operating
0.4 A
0.2 A
Fuse
F 2 A, 250 V
F 2 A, 250 V
Power I/O
US/Worldwide
UK/Europe
Power input connector
IEC
IEC
Power output connector
Edison
IEC
Power Cord plug
Edison (US)
Local plug
Type
Quantity
Lifespan
LED
176
50,000 hours
Maximum External Temp.
Cooling System
104° F (40° C)
Convection
I/O Connectors
Connector Type
Channel Range
3-pin XLR
Sockets
8
Product Name
Item Code
Item Number
MotionDrape™ LED
15090388
MOTIONDRAPELED
Light Source
Thermal
DMX
Ordering
MotionDrape™ LED User Manual (Rev. 05)
Page 13 of 13