Chevrolet 2010 Aveo Sedan Automobile User Manual

Kodak EasyShare C310/CD40
digital camera
FPO
User’s guide
www.kodak.com
For interactive tutorials, www.kodak.com/go/howto
For help with your camera, www.kodak.com/go/c310support or
www.kodak.com/go/cd40support
Eastman Kodak Company
Rochester, New York 14650
© Eastman Kodak Company, 2005
All screen images are simulated.
Kodak, EasyShare, and Retinar are trademarks of Eastman Kodak Company.
P/N 4J4295_en
Product features
Front view
4
5
6
7
3
8
2
1
1 Grip
5 Mode dial/Power
2 Strap post
6 Flash unit
3 Self Timer/Video light
7 Viewfinder lens
4 Shutter button
8 Lens
www.kodak.com/go/support
i
Product features
Back view
6
7
8
9
10
11
5
12
4
13
3
14
15
2
16
1
ii
1 Tripod socket
9 Camera screen
(LCD: liquid crystal display)
2 Dock connector
10 Flash/Status
3 Share button
11 Grip
button
4 Controller buttons (4)
12 Slot for optional SD/MMC card
5 OK button
13 Menu button
6 Delete button
14 Review button
7 Viewfinder
15 USB (Universal Serial Bus) port
8 Ready light
16 Battery compartment
www.kodak.com/go/support
Table of contents
1
1 Setting up your camera .........................................................................1
Attaching the wrist strap ............................................................................... 1
Loading the batteries .................................................................................... 1
Turning on the camera .................................................................................. 2
Setting the date/time, first time ..................................................................... 2
Setting the language and date/time, other times............................................ 3
Storing pictures on an SD or MMC card ......................................................... 3
2 Taking pictures and videos ....................................................................4
Taking a picture ............................................................................................ 4
Using digital zoom ........................................................................................ 6
Using the flash.............................................................................................. 7
Reviewing pictures and videos....................................................................... 7
Protecting pictures and videos from deletion................................................ 10
3 Transferring and printing pictures .......................................................12
Installing the software................................................................................. 12
Transferring pictures with the USB cable...................................................... 13
Printing pictures.......................................................................................... 14
Dock compatibility for your camera.............................................................. 17
4 Doing more with your camera .............................................................18
Putting yourself in the picture or video......................................................... 18
Running a slide show .................................................................................. 19
Copying pictures and videos ........................................................................ 20
Choosing a flash setting .............................................................................. 22
Changing picture-taking settings ................................................................. 23
Customizing your camera ............................................................................ 25
Viewing picture/video information ............................................................... 28
Pre-tagging for album names ...................................................................... 28
Sharing your pictures................................................................................... 31
www.kodak.com/go/support
iii
Table of contents
5 Troubleshooting ..................................................................................36
Camera problems........................................................................................ 36
Camera/computer communications.............................................................. 40
LCD screen messages .................................................................................. 41
Camera ready light status............................................................................ 44
6 Getting help ........................................................................................46
Helpful Web links........................................................................................ 46
Software help.............................................................................................. 46
Telephone customer support ....................................................................... 46
7 Appendix .............................................................................................49
Camera specifications ................................................................................. 49
Storage capacities ....................................................................................... 52
Power-saving features................................................................................. 53
Important safety instructions ....................................................................... 53
Battery information ..................................................................................... 55
Upgrading your software and firmware........................................................ 56
Additional care and maintenance ................................................................ 56
Warranty..................................................................................................... 57
Regulatory compliance ................................................................................ 59
iv
www.kodak.com/go/support
1
Setting up your camera
Attaching the wrist strap
Loading the batteries
CRV3 lithium
(non-rechargeable)
Ni-MH KAA2HR
(rechargeable)
2-AA lithium, Ni-MH,
or oxy-alkaline AA
For information on replacing batteries and extending battery life, see page 55.
www.kodak.com/go/support
1
Setting up your camera
Turning on the camera
Setting the date/time, first time
At the prompt, press OK.
to change.
for previous/next field.
OK
2
to accept.
www.kodak.com/go/support
Setting up your camera
Setting the language and date/time, other times
1
Press Menu.
2
3
to highlight Setup Menu
then press OK.
to highlight Language
, then press OK.
or Date/Time
If setting the date/time:
to change.
OK
for previous/next field.
to accept.
Storing pictures on an SD or MMC card
Your camera has 16 MB of internal memory. You can purchase an SD or MMC card to
conveniently store more pictures and videos.
NOTE: We recommend Kodak SD and MMC cards. When using the card for the first time, format it in this
camera before taking pictures (see page 27).
SD or MMC
card (optional)
Notched corner
CAUTION:
A card can only be inserted one way; forcing it may cause
damage. Inserting or removing a card when the Ready light is
blinking may damage pictures, card, or camera.
See page 52 for storage capacities. Purchase SD or MMC cards at a dealer of Kodak
products or www.kodak.com/go/c310accessories or
www.kodak.com/go/cd40accessories
www.kodak.com/go/support
3
2
Taking pictures and videos
Taking a picture
1
3 Press the Shutter button
to take the picture.
Turn on camera.
Ready light
4 When the Ready light
blinks green, the picture is
being saved; you can still
take pictures.
2
Frame your subject in the
viewfinder or LCD screen.
Taking a video
1
3
Turn on camera.
Press the Shutter button down
and release, or press and hold
for more than 2 seconds.
The camera does not record
audio.
2
To stop recording, press the
Shutter button again.
Frame your subject in the
viewfinder or LCD screen.
4
www.kodak.com/go/support
Taking pictures and videos
Reviewing the picture or video just taken
After you take a picture or video, the camera LCD screen displays a Quickview for
approximately 5 seconds.
While the picture or video and
are displayed:
If you take no
action, the
picture/video is
saved.
Delete
OK to play/pause a video
Tag a picture/video for email or as a
favorite, or tag a picture for print.
To view pictures and videos anytime, see page 7.
Using the camera LCD screen as a viewfinder
IMPORTANT: The Liveview feature significantly depletes battery power; use it sparingly.
1 Turn the Mode dial to any Still mode.
2 Press the OK button to turn on the camera screen.
3 Frame your subject in the camera screen.
4 Press the Shutter button to take the picture.
5 To turn off the LCD screen, press the OK button.
OK button
To make the LCD screen turn on whenever the camera is on, see Liveview, page 25
www.kodak.com/go/support
5
Taking pictures and videos
Picture/video capture screens
Flash
Self-timer
Date stamp
Picture quality
Pictures/video time remaining
Image storage location
Album name
Mode description
Zoom:
Telephoto
Wide
Low battery
Capture mode
Exposure compensation
Using digital zoom
Use digital zoom in any Still mode to get up to 5X closer to your subject.
IMPORTANT: You may notice a decrease in printed image quality when using digital
zoom. The blue slider on the zoom indicator pauses and turns red when the
picture quality reaches the limit for an acceptable 4 x 6 in. (10 x 15 cm)
print.
1 Press the OK button to turn on the LCD screen, then
press to zoom in.
The LCD screen displays the zoomed image and the
zoom indicator.
2 Press
to zoom in and out.
3 Press the Shutter button to take the picture.
To turn off digital zoom, from the lowest setting,
press .
NOTE: You cannot use digital zoom for video recording.
Zoom indicator
Digital zoom is available only when Liveview is turned on. (See page 25.)
6
www.kodak.com/go/support
Taking pictures and videos
Using the flash
Use the flash when you take pictures at night, indoors, or outdoors in heavy shadows.
Flash is effective between 2.6 - 7.9 ft (0.8 - 2.4 m). You can only change the flash
setting in Still modes.
Press the
button repeatedly to scroll
through flash options (see Flash modes table on
page 22).
The active flash icon is displayed in the
LCD screen status area (see page 6).
To change the flash settings, see page 22.
Reviewing pictures and videos
Press the Review button to view and work with your pictures and videos.
Videos:
OK to play/pause
Rewind to beginning (during playback)
Next picture/video (during playback)
1
2
(previous/next)
Review
(Press again to exit)
To save battery power, use the optional Kodak EasyShare camera or printer dock.
(See www.kodak.com/go/c310accessories or www.kodak.com/go/cd40accessories.)
NOTE: Pictures taken at 3.5 MP (3:2) quality setting are displayed at a 3:2 aspect ratio with a black bar at
the top of the screen.
www.kodak.com/go/support
7
Taking pictures and videos
What the review icons mean
Print tag/number of prints
Favorite tag
Email tag
Scroll arrows
Video length
Protect
Picture/video number
Image storage location
Review mode
Video number
Image storage
location
Press OK to
Play or Pause
Review mode
Scroll arrows
8
www.kodak.com/go/support
Taking pictures and videos
Magnifying a picture during review
OK
magnify at 2X. Press again for 4X.
view other parts of the picture.
OK
return to 1X.
Viewing multi-up (thumbnails) during review
view multi-up thumbnails.
view previous/next row of thumbnails.
view previous/next thumbnail.
OK view single picture.
www.kodak.com/go/support
9
Taking pictures and videos
Protecting pictures and videos from deletion
1
Press Review.
2
3
4
Note: To cancel Protect,
press OK again.
for previous/next.
Press Menu.
Press
to
highlight Protect
then press OK.
,
The picture or video is protected and cannot be deleted. The Protect icon
with the protected picture or video.
appears
Press the Menu button to exit.
CAUTION:
Formatting internal memory or an SD or MMC card deletes all
(including protected) pictures, videos. (Formatting internal
memory also deletes email addresses, album names, and
favorites. To restore them, see EasyShare software Help.)
10
www.kodak.com/go/support
Taking pictures and videos
Deleting pictures and videos
1
2
Press Review. (To exit, press
Review again.)
for previous/next.
3
Press Delete.
4
Follow the screen prompts.
PICTURE or VIDEO—deletes the displayed picture or video.
EXIT—exits the Delete screen.
ALL—deletes all pictures and videos from your current storage location.
NOTE: To delete protected pictures and videos, remove protection before deleting.
www.kodak.com/go/support
11
3
Transferring and printing
pictures
Installing the software
CAUTION:
Install Kodak EasyShare software before connecting the camera or
optional dock to the computer. Failure to do so may cause the
software to load incorrectly.
1 Close all software applications that are open on your computer (including
anti-virus software).
2 Place the Kodak EasyShare software CD into the CD-ROM drive.
3 Load the software:
Windows OS—if the install window does not appear, choose Run from the Start
menu and type d:\setup.exe where d is the drive letter that contains the CD.
Mac OS X—double-click the CD icon on the desktop, then click the Install icon.
4 Follow the on-screen instructions to install the software.
Windows OS—select Complete to automatically install the most commonly used
applications. Select Custom to choose the applications you wish to install.
Mac OS X—follow the on-screen instructions.
NOTE: When prompted, register your camera and software. Registering lets you sign up for information
that keeps your system up-to-date. To register later, visit www.kodak.com/go/register.
5 If prompted, restart the computer. If you turned off anti-virus software, turn it back
on. See the anti-virus software manual for details.
For information on the software applications included on the Kodak EasyShare
software CD, click the Help button in the Kodak EasyShare software.
12
www.kodak.com/go/support
Transferring and printing pictures
Transferring pictures with the USB cable
1 Turn off the camera.
2 Plug the labeled end of the USB cable
(model U-8) into the labeled USB port on your
computer. See your computer user’s guide for
details.
3 Plug the other end of the USB cable into the labeled
USB port on the camera.
4 Turn on the camera.
Kodak EasyShare software opens on your computer.
The software prompts you through the transfer
process.
NOTE: Visit www.kodak.com/go/howto for an online tutorial on connecting.
Also available for transferring
You can also use these Kodak products to transfer your pictures and videos.
■
Kodak EasyShare camera dock, Kodak EasyShare printer dock (see page 17)
■
Kodak multi-card reader, Kodak SD multimedia card reader-writer
Purchase these and other accessories at a dealer of Kodak products or
www.kodak.com/go/c310accessories or www.kodak.com/go/cd40accessories
www.kodak.com/go/support
13
Transferring and printing pictures
Printing pictures
Printing with a Kodak EasyShare printer dock
Dock your camera to the Kodak EasyShare printer dock and print directly—with or
without a computer. Purchase this and other accessories at a dealer of Kodak
products or www.kodak.com/go/c310accessories or
www.kodak.com/go/cd40accessories
Direct printing with a PictBridge enabled printer
Your camera is compatible with PictBridge technology, so you can print directly to
PictBridge enabled printers. You need:
■ Camera with fully charged batteries, or ■ PictBridge enabled printer
with optional Kodak 3-volt AC adapter ■ USB cable (may be sold separately)
Connecting the camera to a PictBridge enabled printer
1 Turn off the camera and printer.
2 Optional: If you have a Kodak 3-volt AC adapter (optional accessory), plug it into
the camera and into an electrical outlet.
IMPORTANT: Do not use the AC adapter included with the EasyShare camera dock or
printer dock to power your camera.
3 Connect the appropriate USB cable from the camera to the printer. (See your
printer user guide or www.kodak.com/go/c310accessories or
www.kodak.com/go/cd40accessories for details.)
14
www.kodak.com/go/support
Transferring and printing pictures
Printing from a PictBridge enabled printer
1 Turn on the printer. Turn on the camera.
The PictBridge logo is displayed, followed by the current picture and menu. (If no
pictures are found, a message is displayed.) If the menu interface turns off, press any
button to redisplay it.
2 Press
to choose a printing option, then press the OK button.
Current Picture Press
to choose a picture. Choose the number of copies.
Tagged Pictures If your printer is capable, print pictures that you tagged for
printing and choose a print size.
Index Print
Print thumbnails of all pictures. This option requires one or more
sheets of paper. If the printer is capable, choose a print size.
All Pictures
Print all pictures in internal memory, on a card, or in Favorites.
Choose the number of copies.
Image Storage
Access internal memory, a card, or Favorites.
NOTE: During direct printing, pictures are not permanently transferred or saved to the computer or printer.
To transfer pictures to your computer, see page 12. In Favorites mode, the current favorite picture
is displayed.
www.kodak.com/go/support
15
Transferring and printing pictures
Disconnecting the camera from a PictBridge enabled printer
1 Turn off the camera and printer.
2 Disconnect the USB cable from the camera and the printer.
Using a printer that is not PictBridge enabled
For details on printing pictures from your computer, click the Help button in the Kodak
EasyShare software.
Ordering prints online
Kodak EasyShare Gallery (www.kodakgallery.com) is one of the many online print
services offered in the Kodak EasyShare software. You can easily:
■
Upload your pictures.
■
Edit, enhance, and add borders to your pictures.
■
Store pictures, and share them with family and friends.
■
Order high-quality prints, photo greeting cards, frames, and albums—and have
them delivered to your door.
Printing from an optional SD or MMC card
■
Automatically print tagged pictures when you insert your card into a printer with
an SD/MMC card slot. See your printer user’s guide for details.
■
Make prints at an SD/MMC card-capable Kodak picture maker. (Contact a location
prior to visiting. See www.kodak.com/go/picturemaker.)
■
Take the card to your local photo retailer for professional printing.
16
www.kodak.com/go/support
Transferring and printing pictures
Dock compatibility for your camera
Kodak EasyShare dock
Docking configuration
■ printer dock
Custom dock
insert
■ printer dock plus
■ printer dock 6000
■ camera dock 6000
Kodak dock
adapter kit D-22
Dock
■ others, including series 3
Custom dock
insert
printer docks and camera
docks
Dock
■ printer dock 4000
Not compatible
■ camera dock II
■ LS420, LS443 camera dock
Purchase camera docks, printer docks, and other accessories at a dealer of Kodak
products or www.kodak.com/go/c310accessories or
www.kodak.com/go/cd40accessories
www.kodak.com/go/support
17
4
Doing more with your camera
Putting yourself in the picture or video
The Self Timer creates a 10- or 2-second delay between the time you press the Shutter
button and the time the picture or video is taken.
1 Turn the Mode dial to any Still mode for pictures, or to
the Menu button.
2 Press
to highlight Self Timer
for videos, then press
, then press the OK button.
3 Highlight 10 or 2 seconds, then press the OK button.
4 Press the Menu button to turn off the menu screen.
The Self Timer icon
and delay time appear in the status area.
5 Place the camera on a flat surface or use a tripod.
6 Compose the scene.
Press the Shutter button, then move so that you are in the scene.
If the Self Timer is set at 10 seconds, the Self Timer light blinks slowly for 8 seconds
(then quickly for 2 seconds) before the picture or video is taken.
If the Self Timer is set at 2 seconds, the light blinks for 2 seconds before the picture or
video is taken.
The Self Timer cancels after you take the picture, record the video, or turn off the
camera.
NOTE: The video stops when you press the Shutter button or when no storage space remains.
18
www.kodak.com/go/support
Doing more with your camera
Running a slide show
Use the Slide Show to display your pictures and videos on the LCD screen.
To run a slide show on a television or on any external device, see page 20.
Starting the slide show
1 Press the Review button, then press the Menu button.
2 Press
to highlight Slide Show
, then press the OK button.
3 Press
to highlight Begin Show, then press the OK button.
Each picture and video is displayed once, in the order in which you took them.
4 To cancel the Slide Show, press the OK button.
Changing the slide show display interval
The default interval setting displays each picture for 5 seconds. You can set the display
interval from 3 to 60 seconds.
1 On the Slide Show menu, press
OK button.
to highlight Interval, then press the
2 Select a display interval.
To scroll through the seconds quickly, press and hold
.
3 Press the OK button.
The interval setting remains until you change it.
www.kodak.com/go/support
19
Doing more with your camera
Running a continuous slide show loop
When you turn on Loop, the slide show is continuously repeated.
1 On the Slide Show menu, press
to highlight Loop, then press the OK button.
2 Press
to highlight On, then press the OK button.
The slide show repeats until you press the OK button or until battery power is
exhausted. This setting remains until you change it.
Displaying pictures and videos on a television
You can display pictures and videos on a television, computer monitor, or any device
equipped with a video input using a compatible Kodak EasyShare printer dock and an
optional audio/video cable (see the printer dock user’s guide).
Purchase these and other accessories at a dealer of Kodak products or at
www.kodak.com/go/c310accessories or www.kodak.com/go/cd40accessories
Copying pictures and videos
You can copy pictures and videos from a card to internal memory or from internal
memory to a card.
Before you copy, make sure that:
■
A card is inserted in the camera.
■
The camera’s picture storage location is set to the location from which you are
copying. See Image Storage, page 24.
20
www.kodak.com/go/support
Doing more with your camera
Copy pictures or videos:
1 Press the Review button, then press the Menu button.
2 Press
to highlight Copy
3 Press
to highlight an option.
, then press the OK button.
4 Press the OK button.
NOTE: Pictures and videos are copied, not moved. To remove pictures and videos from the original location
after copying, delete them (see page 10).
Tags that you applied for print, email, and favorites are not copied. Protection settings are not
copied. To apply protection to a picture or video, see page 10.
www.kodak.com/go/support
21
Doing more with your camera
Choosing a flash setting
Flash button
Press the
button repeatedly to scroll
through flash options
(see Flash modes table).
The current flash mode is shown in the
LCD status area.
NOTE:
■
Off and Fill flash options revert to Auto when the camera is turned off.
■
When the picture is taken with Auto or Fill flash selected, the camera flashes
twice: once to set the exposure and once to take the picture.
Flash modes
Flash fires
Auto
Flash
When the lighting conditions require it.
Fill
Every time you take a picture, regardless of the lighting conditions. Use
when the subject is in shadow or is “backlit” (when the sun is behind the
subject).
Red-eye Three times: once to set the exposure, once to reduce red-eye, and once
to take the picture.
Off
22
Flash never fires.
www.kodak.com/go/support
Doing more with your camera
Changing picture-taking settings
You can change settings to get the best results from your camera:
1 In any mode, press the Menu button.
2 Press
to highlight the setting you wish to change, then press the OK button.
3 Choose an option, then press the OK button.
4 Press the Menu button to exit.
Setting
Icon
Options
Self Timer
Put yourself in the picture or video.
10, 2 seconds, Off.
See page 18.
Exposure Compensation
(Still modes)
Choose how much light enters the
camera.
This setting remains until you turn
the Mode dial.
-2.0 to +2.0.
If pictures are too dark, increase the value.
If pictures are too light, decrease the
value.
www.kodak.com/go/support
23
Doing more with your camera
Setting
24
Icon
Options
Picture Size
(Still modes)
Set picture resolution.
This setting remains until you change
it.
4.0 MP (default)—for printing up to
20 x 30 in. (51 x 76 cm); pictures are
highest resolution and largest file size.
3.5 MP (3:2 Best)—ideal for printing
4 x 6 in. (10 x 15 cm) prints without
cropping. Also for printing up to
20 x 30 in. (51 x 76 cm); some cropping
may result due to the 3:2 aspect ratio.
3.1 MP (Better)—for printing up to
11 x 14 in. (28 x 36 cm); pictures are
medium resolution with smaller file size.
2.1 MP—for printing up to 8 x 10 in.
(20 x 25 cm); pictures are medium
resolution with smaller file size.
1.1 MP—for printing up to 5 x 7 in.
(13 x 18 cm); for emailing, Internet, or
screen display; pictures are lowest
resolution and smallest file size.
Color Mode
(Still modes)
Choose color tones.
This setting remains until you turn
the Mode dial.
Color (default)—for color pictures.
Black & White—for black-and-white
pictures.
Sepia—for pictures with a
reddish-brown, antique look.
Image Storage
Choose an image storage location.
This setting remains until you change
it.
Auto (default)—the camera uses the
card if one is in the camera. If not, the
camera uses internal memory.
Internal Memory—the camera always
uses internal memory, even if a card is
installed.
www.kodak.com/go/support
Doing more with your camera
Setting
Icon
Options
Set Album
Choose Album names.
On or Off.
Pre-select album names before you take
pictures or videos. Then, all the pictures or
videos you take are tagged with those
album names. See page 28.
Video Length
(Video mode)
Choose the amount of recording
time for videos.
This setting remains until you change
it.
Continuous (default)— as long as
there is room on the card or internal
memory, or until the Shutter button is
pressed.
5, 15, or 30—seconds
Setup Menu
Choose additional settings.
See Customizing your camera, page 25.
NOTE: If the current image storage location
does not have adequate space, some
video length options are not displayed.
See page 52 for storage capacities.
Customizing your camera
Use Setup to customize your camera settings.
1 In any mode, press the Menu button.
2 Press
to highlight Setup
, then press the OK button.
3 Press
to highlight the setting you wish to change, then press the OK button.
4 Choose an option, then press the OK button.
www.kodak.com/go/support
25
Doing more with your camera
5 Press the Menu button to exit.
Setting
Icon
Options
Return
Return to previous menu.
26
Liveview
Change the LCD screen setting
so that it is always on or always
off (see page 26).
This setting remains until you
change it.
On or Off.
Auto Power Off
Select when you would like the
camera to turn off.
3 minutes (default)
1, 3, 5, or 10 minutes
Date & Time
Set the date and time.
This setting remains until you
change it.
See page 3.
Video Out
Choose the regional setting that
lets you connect the camera to a
television or other external
device (see page 20).
This setting remains until you
change it.
NTSC (default)—used in most countries
except those in Europe and China. North
America and Japan use NTSC.
PAL—used in Europe and China.
Date Stamp
(Still modes)
Imprint the date on pictures.
This setting remains until you
change it.
Turn the Date Stamp on or off, or change
the date stamp format.
www.kodak.com/go/support
Doing more with your camera
Setting
Icon
Options
Video Date Display
(Video mode)
Display capture date and time
before the video starts.
This setting remains until you
change it.
Choose None, or choose a date and time
format.
Language
Display the camera screen text
in different languages.
This setting remains until you
change it.
See page 3.
Format
Format camera memory.
Memory Card—deletes everything on the
card; formats the card.
Cancel—exits without making a change.
Internal Memory—deletes everything in
internal memory including email addresses,
album names, and Favorites: formats the
internal memory.
CAUTION:
Formatting
deletes all
pictures and
videos,
including those
that are
protected.
Removing a
card during
formatting may
damage the
card.
About
View camera and firmware
information.
www.kodak.com/go/support
27
Doing more with your camera
Viewing picture/video information
1 Press the Review button, then press the Menu button.
2 Press
to highlight Picture or Video Info, then press the OK button.
3 To view information on the next or previous picture or video, press
.
4 Press the Menu button to exit.
Changing optional review settings
In Review mode, press the Menu button to access optional review settings.
Magnify (pictures) (page 10)
Protect (page 11)
Album (page 28)
Image Storage (page 24)
Slide Show (page 19)
Picture/Video Information (page 28)
Multi-up (page 10)
Setup Menu (page 25)
Copy (page 20)
Pre-tagging for album names
Use the Set Album (Still or Video) feature to pre-select album names before you take
pictures or videos. Then, all the pictures or videos you take are tagged with those
album names.
First—on your computer
Use Kodak EasyShare software to create album names on your computer. Then copy
up to 32 album names to the album name list on your camera the next time you
connect the camera to the computer. See Kodak EasyShare software Help for details.
28
www.kodak.com/go/support
Doing more with your camera
Second—on your camera
1 In any mode, press the Menu button.
2 Press
to highlight Set Album
, then press the OK button.
3 Press
to highlight an album name, then press the OK button. Repeat to
mark pictures or videos for albums.
Selected albums are noted with a check mark.
4 To remove a selection, highlight an album name and press the OK button. To
remove all album selections, select Clear All.
5 Highlight Exit, then press the OK button.
Your selections are saved. If you turn on the LCD screen, your album selection is
displayed on the screen. A plus (+) after the album name means more than one album
is selected.
6 Press the Menu button to exit.
This setting remains until you change it.
Third—transfer to your computer
When you transfer the tagged pictures and videos to your computer, Kodak EasyShare
software opens and categorizes your pictures and videos in the appropriate album.
See the Kodak EasyShare software Help for details.
Tagging pictures/videos for albums
Use the Album feature in Review mode to tag the pictures and videos in your camera
with album names.
First—on your computer
Use Kodak EasyShare software to create album names on your computer, then copy
up to 32 album names to the camera’s internal memory. See Kodak EasyShare
software Help for details.
Second—on your camera
www.kodak.com/go/support
29
Doing more with your camera
1 Press the Review button.
2 Press
to locate a picture, then press the Menu button.
3 Press
to highlight Album
, then press the OK button.
4 Highlight an album, then press the OK button.
The album name appears with the picture. A plus (+) after the album name means the
picture was added to more than one album.
To add other pictures to the same album, press
to scroll through the pictures.
When the picture you want is displayed, press the OK button.
To add the pictures to more than one album, repeat step 4 for each album.
5 To remove a selection, highlight an album name, then press the OK button. To
remove all album selections, select Clear All.
6 Highlight Exit, then press the OK button.
Your selections are saved.
1 Press the Menu button to return to Review mode.
Third—transfer to your computer
When you transfer the tagged pictures and videos to your computer, Kodak EasyShare
software opens and categorizes your pictures and videos in the appropriate album.
See Kodak EasyShare software Help for details.
30
www.kodak.com/go/support
Doing more with your camera
Sharing your pictures
Press the Share button to
tag your pictures and videos.
When they are transferred to your
computer, you can share using:
Pictures
Videos
Print (page 16)
✔
Email (page 33)
✔
✔
Favorites (page 33),
for easy organization on your computer and for
sharing on your camera
✔
✔
NOTE: Tags remain until removed. If a tagged picture or video is copied, the tag is not copied.
Tagging pictures for printing
1 Press the Share button.
2 Press
to locate a picture.
3 Press
to highlight Print
, then press the OK button.*
4 Press
to select the number of copies (0 - 99). The default is one. Zero
removes the tag for that picture.**
The Print icon
appears in the status area.
5 Press the OK button.
www.kodak.com/go/support
31
Doing more with your camera
6 Press the Share button to exit.
* To tag all pictures in the image storage location, highlight Print All , press the OK
button, then select the number of copies as described above. Print All is not available
in Quickview.
**To remove the print tagging for all pictures in the image storage location, highlight
Cancel Prts , then press the OK button. You cannot cancel prints in Quickview.
Printing tagged pictures
When you transfer the tagged pictures to your computer, the Kodak EasyShare
software print screen opens. For details, click the Help button in the Kodak EasyShare
software.
For more information on printing from your computer or card, see page 32.
NOTE: For the best 4 x 6 in. (10 x 15 cm) prints, set the camera to 3.5MP (3:2) print quality setting.
See page 24.
Tagging pictures and videos for emailing
First—on your computer
Use Kodak EasyShare software to create an email address book on your computer.
Then, copy up to 32 email addresses to the camera’s internal memory.
Second—tag pictures/videos on your camera
1 Press the Share button. Press
2 Highlight Email
to locate a picture/video.
, then press the OK button.
3 Highlight an email address, then press the OK button.
To tag other pictures/videos with the same address, press
to scroll through
the pictures. When the picture or video you want is displayed, press the OK button.
To send the pictures/videos to more than one address, repeat step 2 for each
address.
Selected addresses are checked.
32
www.kodak.com/go/support
Doing more with your camera
4 To remove a selection, highlight a checked address and press the OK button. To
remove all email selections, highlight Clear All.
5 Highlight Exit, then press the OK button.
Your selections are saved. The Email icon
6 Press the Share button to exit.
appears in the status area.
Third—transfer and email
When you transfer the tagged pictures/videos to your computer, the Email screen
opens and lets you send them to the addresses you specified. For details, click the
Help button in the Kodak EasyShare software.
Tagging pictures as favorites
You can preserve your favorite pictures in the Favorites
section of your camera’s
internal memory, then share them with friends and family.
NOTE: When you transfer pictures from your camera to your computer, all pictures (including favorites) are
stored on your computer at full size. Favorite pictures—smaller copies of your originals—are loaded
back to your camera, so you can share and enjoy more.
Share your favorite pictures in 4 easy steps:
1. Take pictures
2. Tag pictures as 1 Press the Share button. Press
favorites
2 Press
to highlight Favorite
to locate a picture.
, then press the OK button.
The Favorite icon
appears in the status area. To remove the tag,
press the OK button again.
Press the Share button to exit the menu.
www.kodak.com/go/support
33
Doing more with your camera
3. Transfer
pictures to your
computer
1 To enjoy full functionality, install and use the EasyShare software
that was packaged with this camera. (See page 12.)
2 Connect the camera to the computer using the USB cable (see
page 13) or an EasyShare dock.
The first time you transfer pictures, the software helps you make
choices about your favorite pictures. Then, your pictures are
transferred to the computer. Favorite pictures (smaller versions of the
originals) are loaded to the Favorites section of your camera’s internal
memory.
4. View favorites
on your camera
1 Turn the Mode dial to Favorites .
2 Press
to scroll through favorites.
To exit Favorites mode, turn the Mode dial to any
other position.
NOTE: The camera holds a limited number of favorites. Use Camera Favorites in the EasyShare software to
customize the size of your camera Favorites
section. Videos tagged as favorites remain in the
Favorites folder in the EasyShare software. For more details, click the Help button in the Kodak
EasyShare software.
Optional settings
In Favorites mode, press the Menu button to access optional settings.
Slide Show (page 19)
Picture Information (page 28)
Multi-up (page 9)
Remove all favorites (page 35)
Setup Menu (page 25)
NOTE: Pictures taken at the 3.5 MP (3:2) quality setting are displayed at a 3:2 aspect ratio with a black bar
at the top of the screen. (See Picture Size (Still modes), page 24.)
34
www.kodak.com/go/support
Doing more with your camera
Removing all favorites from your camera
1 Turn the Mode dial to Favorites
.
2 Press the Menu button.
3 Highlight
, then press the OK button.
All pictures stored in the Favorites section of internal memory are removed. Favorites are
restored the next time you transfer pictures to the computer.
4 Press the Menu button to exit the menu.
Preventing favorites from transferring to the camera
1 Open the Kodak EasyShare software. Click the My Collection tab.
2 Go to the Albums view.
3 Click the Camera Favorites Album for your camera.
4 Click Remove Album.
The next time you transfer pictures from your camera to the computer, use the Camera
Favorites Wizard/Assistant in the Kodak EasyShare software to either recreate your
Camera Favorites Album or to turn off the Camera Favorites feature.
Printing and emailing favorites
1 Turn the Mode dial to Favorites
. Press
to locate a picture.
2 Press the Share button.
3 Highlight Print
or Email
, then press the OK button.
NOTE: Favorites that were taken on this camera (not imported from another source) are good for prints up
to 4 x 6 in. (10 x 15 cm).
www.kodak.com/go/support
35
5
Troubleshooting
For step-by-step product support, visit www.kodak.com/go/c310support or
www.kodak.com/go/cd40support and select Interactive Troubleshooting & Repairs.
Camera problems
Problem
Cause
Solution
Camera does not
turn on.
Batteries are not
installed correctly.
Install new batteries (page 1) or
charge rechargeable batteries.
Camera does not
turn off.
Camera has locked up.
Remove the battery, then reinsert or
replace it. If the camera still does not
function, contact Customer Support
(page 46).
Pictures remaining
number does not
decrease after
taking a picture.
Picture does not take up The camera is operating normally.
enough space to
Continue taking pictures.
decrease the number.
Short battery life
Dirt or oxidation on the
with Kodak Ni-MH battery contacts.
rechargeable digital
camera batteries.
Stored pictures are
corrupted.
36
Wipe the contacts with a clean, dry
cloth (page 55) before loading
batteries in the camera.
Card was removed or the Retake picture. Do not remove card
batteries expired while while the ready light is blinking. Keep
the ready light was
rechargeable batteries charged.
blinking.
www.kodak.com/go/support
Troubleshooting
Problem
Cause
Solution
In Review mode,
Camera may not be
Check the image storage location
you do not see a
accessing the correct
setting (page 24).
picture (or the
image storage location.
expected picture) on
the LCD screen.
In Review mode, a File format is
blue or black screen unrecognized.
is displayed instead
of a picture.
Transfer the picture to the computer
(page 13).
Shutter button does Camera is not turned on.
not work.
Camera is processing a
picture; the ready light
(near the viewfinder) is
blinking red.
Turn on the camera (page 2).
Wait until the ready light stops
blinking red before attempting to take
another picture.
Card or internal memory Transfer pictures to the computer
is full.
(page 13), delete pictures from the
camera (page 11), switch image
storage locations (page 24), or insert
a card with available memory
(page 3).
Shutter button was not
pressed.
Slide show does not Video Out setting is
run on external
incorrect.
video device.
External device is set
incorrectly.
www.kodak.com/go/support
For best pictures, see page 4.
Adjust the camera Video Out setting
(NTSC or PAL, page 26).
See the external device’s user’s guide.
37
Troubleshooting
Problem
Cause
Solution
Picture is too light. Subject was too close for Move so there is at least 2.6 ft (0.8 m)
flash.
between camera and subject.
Too much light.
Picture is not clear. Lens is dirty.
Subject too close when
taking picture.
Decrease Exposure Compensation
(page 23).
Clean the lens (page 56).
Move so there is at least 2.6 ft (0.8 m)
between the camera and the subject.
Subject or the camera
Place the camera on a flat, steady
moved while the picture surface or use a tripod.
was taken.
Picture is too dark. Flash is not on.
Subject is too far away
for the flash to be
effective.
Move so there is no more than 7.9 ft
(2.4 m) between the camera and the
subject.
Subject is in front of a
bright light (backlit).
Use Fill flash (page 22) or change your
position so light is not behind the
subject.
Not enough light.
Increase Exposure Compensation
(page 23).
Camera does not
Card may not be
recognize SD/MMC SD/MMC certified.
card.
Card may be corrupt.
Card is not properly
inserted in camera.
38
Turn on the flash (page 7).
Purchase a certified SD/MMC card.
Reformat the card (page 27).
Caution: Formatting a card deletes all
pictures and videos, including
protected files.
Insert a card into the slot, then push
to seat (page 3).
www.kodak.com/go/support
Troubleshooting
Problem
Cause
Solution
Camera freezes up
when a card is
inserted or
removed.
Camera detected an
Turn the camera off, then back on.
error when the card was Make sure the camera is turned off
inserted or removed.
before inserting or removing a card.
Memory card full.
Storage is full.
Insert a new card (page 3), transfer
pictures to the computer (page 13), or
delete pictures (page 11).
Maximum number of files Transfer pictures to the computer
or folders is reached (or (page 13), then format the card or
other directory concern). internal memory (page 27).
Caution: Formatting a card
deletes all pictures and videos,
including protected files.
www.kodak.com/go/support
39
Troubleshooting
Camera/computer communications
Problem
Cause
The computer
There is a problem with
does not
the configuration of the
communicate
USB port on the computer.
with the camera.
Camera power is off.
Solution
See this file on the EasyShare software
CD: USB.html Or, visit
www.kodak.com/go/
camerasupport
Turn on the camera (page 2).
Batteries are exhausted or Install new batteries (page 1) or
are not charged.
charge rechargeable batteries.
Some Advanced Power
Management utilities on
laptops turn off ports to
save battery life.
See the Power Management section of
the laptop user’s guide to disable this
feature.
USB cable is not securely Connect cable to camera and
connected.
computer port (page 13).
Software is not installed.
Install the software (page 12).
Software is installed
incorrectly.
Disconnect the USB cable. Close all
open applications. Re-install the
software (page 12).
Too many applications are Disconnect camera from the computer.
running on the computer. Close all software applications,
reconnect camera.
The Battery Monitor or
similar software runs
constantly.
40
Close that software before starting the
Kodak software.
www.kodak.com/go/support
Troubleshooting
Problem
Cause
Cannot transfer Software is not installed.
pictures.
(The Add New
Hardware Wizard
cannot locate
drivers.)
Software is installed
incorrectly.
Solution
Disconnect USB cable. (If using camera
dock or printer dock, disconnect cable
and remove camera from dock). Close
all open applications. Re-install the
software (page 12).
Disconnect the USB cable. Close all
open applications. Re-install the
software (page 12).
LCD screen messages
Message
Cause
Solution
No images to display There are no pictures in Change image storage location
the current image storage setting (page 24).
location.
Memory card requires Card is corrupted or
formatting
formatted for another
digital camera.
Memory card cannot
be read (Please format
memory card or insert
another card)
Insert a new card (page 3) or
format the card (page 27).
Caution: Formatting a card
deletes all pictures and
videos, including protected
files.
Only one USB
USB cable is connected to Unplug the USB cable from the
connection allowed. camera while docked.
camera.
Disconnect cable or
rem. (remove) camera
from dock.
www.kodak.com/go/support
41
Troubleshooting
Message
Cause
Solution
Internal memory
requires formatting
Camera internal memory
is corrupted.
Format the internal memory
(page 27).
Caution: Formatting deletes
all pictures and videos,
including protected files.
(Formatting internal memory
also deletes email addresses,
album names, and Favorites.
To restore them, see the
Kodak EasyShare software
Help.)
Internal memory
cannot be read (Please
format internal
memory)
No memory card (Files There is no card in the
Insert a card (page 3).
not copied)
camera. Pictures were not
copied.
Not enough space to There is not enough space
copy files (Files not
in the image storage
copied)
location you are copying
to (internal memory or the
card).
Delete pictures from the image
storage location you are copying to
(page 11), or insert a new card
(page 3).
Memory card is locked Card is write-protected.
(Insert new memory
card)
Insert a new card (page 3), move
the switch on the card to unlock
the card, or change the image
storage location to internal
memory (page 24).
Read-only memory
card.
Remove write
protection to capture
or write to card.
42
www.kodak.com/go/support
Troubleshooting
Message
Cause
Solution
Memory card is
Card is slow, corrupted, or Insert a new card (page 3) or
unusable (Insert new unreadable.
format the card (page 27).
memory card)
Caution: Formatting a card
deletes all pictures and
videos, including protected
files.
Date and time have
been reset
This is the first time you Reset the clock (page 3).
turned on the camera; or
the batteries have been
removed for an extended
period of time; or the
batteries are exhausted.
No address book on No Email addresses
Create and copy address book from
camera (Connect with appear because there is no computer. See the Kodak
computer to import
address book.
EasyShare software Help.
address book)
No album names on Album names have not
Create and copy album names from
camera (Connect with been copied to the camera computer. See the Kodak
computer to import
from the computer.
EasyShare software Help.
album names)
Can only mark image
with 32 album names.
Only the first 32 album
names will be saved
The maximum number of Delete one or more album names
album names (32) have associated with the image
been associated with an (page 29).
image.
NOTE: Albums previously
associated with an image
persist even though they
may not be contained in
current album file on
camera.
www.kodak.com/go/support
43
Troubleshooting
Message
Cause
Solution
High camera
Internal temperature of
temperature. (Camera the camera is too high for
will be turned off.)
the camera to operate.
The viewfinder light glows
red and the camera turns
off.
Leave the camera off until it’s cool
to the touch, then turn it back on.
If the message reappears, contact
Customer Support (page 46).
Unrecognized file
format
Transfer the picture to the
computer (page 13), or delete it
(page 11).
Camera cannot read the
picture format.
Camera error #XXXX. An error is detected.
See user’s guide.
Turn the Mode dial off, then back
on. If the message reappears,
contact Customer Support
(page 46).
Camera ready light status
Status
Cause
Solution
Ready light does not
turn on and the
camera does not
work.
Camera is not turned on. Turn on the camera (page 2).
Batteries are exhausted Install new batteries (page 1) or
or are not charged.
charge rechargeable batteries.
Mode dial was on when Turn Mode dial off, then back on.
batteries were reloaded.
44
Ready light blinks
green.
Picture is being
Camera is operating normally.
processed and saved to
the camera.
Ready light blinks
amber.
Flash is not charged.
Camera is initializing.
Wait. Resume picture taking when
the light stops blinking and turns
green.
www.kodak.com/go/support
Troubleshooting
Status
Cause
Solution
Ready light blinks red Batteries are low or
and camera turns off. exhausted.
Install new batteries (page 1) or
charge rechargeable batteries.
Ready light glows
steady red.
Camera’s internal
memory or card is full.
Transfer pictures to the computer
(page 13), delete pictures from the
camera (page 11), switch image
storage locations (page 24), or insert
a card with available memory
(page 3).
Camera processing
memory is full.
Wait. Resume picture taking when
the light turns green.
Card is read-only.
Change the image storage location
to internal memory (page 24), or use
a different card.
Ready light glows
steady green.
Camera is on; ready to Camera is operating normally.
take a picture or video.
www.kodak.com/go/support
45
6
Getting help
Helpful Web links
Help with your camera
www.kodak.com/go/c310support
www.kodak.com/go/cd40support
Help with Windows operating system and
working with digital pictures
www.kodak.com/go/pcbasics
Download the latest camera software and
firmware
www.kodak.com/go/c310downloads
www.kodak.com/go/cd40downloads
Optimize your printer for truer, more vibrant www.kodak.com/go/onetouch
colors
Get support for cameras, software,
accessories, more
www.kodak.com/go/support
Purchase camera accessories
www.kodak.com/go/c310accessories
www.kodak.com/go/cd40accessories
Register your camera
www.kodak.com/go/register
View online tutorials
www.kodak.com/go/howto
Software help
Click the Help button in the Kodak EasyShare software. Also, see the tutorial on the
CD for help with connecting your camera to a computer.
Telephone customer support
If you have questions concerning the operation of the software or camera, you may
speak with a customer support representative.
46
www.kodak.com/go/support
Getting help
Before you call
Have the camera, camera dock, or printer dock connected to your computer. Be at
your computer, and have the following information available:
■ Operating system
■ Exact error message you received
■ Processor speed (MHz)
■ Version of Kodak EasyShare software CD
■ Computer model
■ Camera serial number
■ Amount of memory (MB)
NOTE: See next page for customer support numbers.
www.kodak.com/go/support
47
Getting help
Australia
1800 147 701
Netherlands
020 346 9372
Austria
0179 567 357
New Zealand
0800 440 786
Belgium
02 713 14 45
Norway
23 16 21 33
Brazil
0800 150000
Philippines
1 800 1 888 9600
Canada
1 800 465 6325
Poland
00800 4411625
China
800 820 6027
Portugal
021 415 4125
Denmark
3 848 71 30
Singapore
800 6363 036
Ireland
01 407 3054
Spain
91 749 76 53
Finland
0800 1 17056
Sweden
08 587 704 21
France
01 55 1740 77
Switzerland
01 838 53 51
Germany
069 5007 0035
Taiwan
0800 096 868
Greece
00800 44140775
Thailand
001 800 631 0017
Hong Kong
800 901 514
Turkey
00800 448827073
India
91 22 617 5823
United Kingdom
0870 243 0270
Italy
02 696 33452
United States
1 800 235 6325
585 781 6231 (toll)
Japan
03 5540 9002
International Toll Line
+44 131 458 6714
Korea
00798 631 0024
International Toll Fax
+44 131 458 6962
For the most up-to-date listings, visit: http://www.kodak.com/go/dfiswwcontacts
48
www.kodak.com/go/support
7
Appendix
Camera specifications
For more specifications, visit www.kodak.com/go/c310support or
www.kodak.com/go/cd40support.
Kodak EasyShare C310/CD40 digital camera
CCD (charge-coupled device)
CCD
1/2.5 in. CCD, 4:3 aspect ratio
Output image size
2304 x 1728 (4.0 M) pixels
2304 x 1536 (3.5 M) pixels
2048 x 1536 (3.1 M) pixels
1664 x 1248 (2.1 M) pixels
1216 x 912 (1.1 M) pixels
Displays
Color display
1.6 in. (4 cm) color hybrid LCD, 220 x 279 (61K) pixels
Preview
Frame rate: 20 fps; Field-of-view: 99%.
Lens
Taking lens
Aspheric all-glass Kodak Retinar lens, f/4.5
35 mm (35 mm equivalent)
Focus system
Fixed focus. Working range: 0.85 m to infinity
Digital zoom
1.0X–5X with 0.2X step
Not supported for movie capture
Lens barrier
Integrated in lens barrel
Exposure
Exposure metering
TTL-AE, Center-weighted
www.kodak.com/go/support
49
Appendix
Kodak EasyShare C310/CD40 digital camera
Exposure compensation +/-2.0 EV with 0.5 EV step
Shutter speed
Mechanical with CCD electrical
Auto: 1/2 - 1/2000 sec.
ISO speed
Auto: 100 to 400
Flash
Electronic flash
Guide no. 9 (@ ISO 100)
Auto flash by pre-flash
Working range @ ISO 140: 0.8 - 2.4 m
Flash modes
Auto, Fill, Red-eye, Off
Capture
Capture modes
Auto, Video
Video capture
QVGA (320 x 240) @ 20 fps
Image file format
Still: EXIF 2.2 (JPEG compression)
Image storage
Optional MMC or SD Card
SD Card Association.)
Internal storage
capacity
16 MB internal memory/13 MB available for image storage
(1 MB equals one million bytes)
. (The SD logo is a trademark of the
Review
Quickview
Yes
Video output
NTSC or PAL, selectable via dock connector
50
www.kodak.com/go/support
Appendix
Kodak EasyShare C310/CD40 digital camera
Power
2 Kodak oxy-alkaline digital camera batteries AA ZR6 (non-rechargeable); 2-AA lithium digital
camera batteries; 2 Kodak Ni-MH rechargeable digital camera batteries AA; 1 Kodak lithium
digital camera battery CRV3 (non-rechargeable); 1 Kodak Ni-MH rechargeable digital camera
battery KAA2HR
Communication with computer
USB 2.0 (PIMA 15740 protocol), via USB cable Model U-8, EasyShare camera dock or printer
dock
Other features
PictBridge support
Yes
Self-timer
10 seconds, 2 seconds selectable
Auto power off
Selectable 1, 3, 5, 10 minutes
Color modes
Color, Black & White, Sepia
Date stamp
None, YYYY/MM/DD, MM/DD/YYYY, DD/MM/YYYY
Tripod mount
1/4 inch
Operating temperature 32-104°F (0-40°C)
Size
4.1 in. (103.5 mm) x 2.6 in. (65 mm) x 1.4 in. (35 mm) @ power off
Weight
4.7 oz (134 g) without battery or card
www.kodak.com/go/support
51
Appendix
Storage capacities
Actual storage capacity varies depending on subject composition, card brand, and
other factors. You may be able to store more or fewer pictures and videos. Favorites
take up additional space in internal memory.
Picture storage capacity
Number of pictures
4.0 MP 3.5 MP
(3:2)
3.1 MP 2.1 MP 1.1 MP
16 MB internal memory
16
18
20
29
48
16 MB SD or MMC
19
21
24
34
56
32 MB SD or MMC
38
43
47
68
112
64 MB SD or MMC
77
85
95
136
223
128 MB SD or MMC
153
171
190
272
447
256 MB SD or MMC
307
341
379
543
893
Video storage capacity
Minutes/seconds of video
QVGA (320 x 240)
16 MB internal memory
35 sec.
16 MB SD or MMC
40 sec.
32 MB SD or MMC
1 min. 21 sec.
64 MB SD or MMC
2 min. 42 sec.
128 MB SD or MMC
5 min. 25 sec.
256 MB SD or MMC
10 min. 50 sec.
52
www.kodak.com/go/support
Appendix
Power-saving features
If no action for
The camera
To turn it back on
1 minute
Screen turns off.
Press any button.
3 minutes or select Enters auto power off.
1, 5, or 10 minutes
Turn the Mode dial off and on again.
Important safety instructions
Using this product
■
Read and follow these instructions before using Kodak products. Always follow
basic safety procedures.
■
Use only a USB 2.0 certified computer equipped with a current-limiting
motherboard. Contact your computer manufacturer if you have questions.
■
The use of an accessory attachment that is not recommended by Kodak, such as an
AC adapter, may cause fire, electric shock, or injury.
■
If using this product in an airplane, observe all instructions of the airline.
CAUTION:
Do not disassemble this product; there are no user-serviceable
parts inside. Refer servicing to qualified service personnel. Do not
expose this product to liquid, moisture, or extreme temperatures.
Kodak AC adapters and battery chargers are intended for indoor
use only. The use of controls, adjustments, or procedures other
than those specified herein may result in exposure to shock
and/or electrical or mechanical hazards. If the LCD breaks, do not
touch the glass or liquid. Contact Kodak Support.
www.kodak.com/go/support
53
Appendix
Battery safety and handling
CAUTION:
When removing batteries, allow them to cool first; batteries may
be hot.
■
Read and follow all warnings and instructions supplied by the battery
manufacturer.
■
Use only batteries that are approved for this product.
■
Keep batteries out of the reach of children.
■
Do not allow batteries to touch metal objects, including coins. Otherwise, a battery
may short circuit, discharge energy, become hot, or leak.
■
Do not disassemble, install backward, or expose batteries to liquid, moisture, fire,
or extreme temperature.
■
Replace all batteries of a set at the same time. Do not mix new batteries with used
ones. Do not mix rechargeable and non-rechargeable batteries. Do not mix lithium,
Ni-MH, and Ni-Cd batteries together. Do not mix batteries of different chemistry
types, grades, or brands. Failure to observe this precaution may cause leakage.
■
Remove batteries when the product is stored for an extended period of time. In the
unlikely event that battery fluid leaks inside the product, contact your local Kodak
Customer Service representative.
■
In the unlikely event that battery fluid leaks onto your skin, wash immediately with
water and contact your local health provider. For additional health-related
information, contact your local Kodak Customer Service representative.
■
Dispose of batteries according to local and national regulations.
■
Do not charge non-rechargeable batteries.
For more information on batteries, see
www.kodak.com/global/en/service/batteries/batteryUsage.jhtml
54
www.kodak.com/go/support
Appendix
Battery information
Battery life for Kodak C-series digital cameras
Use the following batteries. Actual battery life may vary based on usage.
550–700
CRV3 lithium battery
500–600
AA (2) lithium batteries
KAA2HR Ni-MH rechargeable
battery (per charge)
300–400
Ni-MH AA (2)
rechargeable batteries (per charge)
200–300
oxy-alkaline AA (2)
non-rechargeable batteries
125–225
0
700
Battery Life (Approx. number of pictures in Auto mode)
Battery life test method: CIPA
Memory card used in test: Kodak SD 128 MB memory card
We do not recommend or support alkaline batteries. For acceptable battery
life, and to make sure your camera operates dependably, use the replacement
batteries listed above.
Extending battery life
■
Limit the following activities that quickly deplete battery power:
– Reviewing your pictures on the camera screen (see page 7)
– Using the camera LCD screen as a viewfinder (see page 5)
– Excessive use of the flash (see page 22)
■
Dirt on the battery contacts can affect battery life. Wipe the contacts with a clean,
www.kodak.com/go/support
55
Appendix
dry cloth before loading batteries in the camera.
■
Battery performance is reduced at temperatures below 41°F (5°C). When using
your camera in cold weather, carry spare batteries and keep them warm. Do not
discard cold batteries that do not work; when they return to room temperature,
they may be usable.
Visit www.kodak.com/go/c310accessories or
www.kodak.com/go/cd40accessories for:
Kodak EasyShare camera dock—powers your camera, transfers pictures to your
computer, and charges the available Kodak Ni-MH rechargeable digital camera
battery KAA2HR.
Kodak EasyShare printer dock—powers your camera, makes
4 x 6 in. (10 x 15 cm) prints with or without a computer, transfers pictures, and
charges the available Kodak Ni-MH rechargeable digital camera battery KAA2HR.
Upgrading your software and firmware
Download the latest versions of the software included on the Kodak EasyShare
software CD and the camera firmware (the software that runs on the camera). Visit
www.kodak.com/go/c310downloads or www.kodak.com/go/cd40downloads.
Additional care and maintenance
■
If the camera has been subjected to inclement weather or you suspect water has
gotten inside the camera, turn off the camera and remove the batteries and card.
Allow all components to air-dry for at least 24 hours before using the camera
again.
■
Blow gently on the lens or camera screen to remove dust and dirt. Wipe gently
with a soft, lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning
solutions unless designed specifically for camera lenses. Do not allow chemicals,
such as suntan lotion, to contact painted surfaces.
■
Service agreements are available in some countries. Contact a dealer of Kodak
products for more information.
56
www.kodak.com/go/support
Appendix
■
For digital camera disposal or recycling information, contact your local authorities.
In the US, visit the Electronics Industry Alliance Web site at www.eiae.org or the
Kodak Web site at www.kodak.com/go/c310support or
www.kodak.com/go/cd40support
Warranty
Limited warranty
Kodak warrants Kodak EasyShare digital cameras and accessories (excluding
batteries) to be free from malfunctions and defects in both materials and
workmanship for one year from the date of purchase.
Retain the original dated sales receipt. Proof of the date of purchase will be required
with any request for warranty repair.
Limited warranty coverage
This limited warranty will be honored only in the geographical location
that Kodak digital cameras and accessories were purchased.
Kodak will REPAIR or REPLACE Kodak EasyShare digital cameras and accessories if
they fail to function properly during the warranty period, subject to any conditions
and/or limitations stated herein. Such repair service will include all labor as well as
any necessary adjustments and/or replacement parts. Such repair or replacement is
the sole remedy under this warranty.
If replacement parts are used in making repairs, these parts may be remanufactured,
or may contain remanufactured materials. If it is necessary to replace the entire
product, it may be replaced with a remanufactured product.
Limitations
Request for Warranty service will not be accepted without proof of date of purchase,
such as a copy of the original dated Kodak EasyShare digital camera or accessory
sales receipt. (Always keep the original for your records.)
This warranty does not apply to the battery(s) used in digital cameras or accessories.
www.kodak.com/go/support
57
Appendix
This warranty does not cover circumstances beyond Kodak’s control, nor problems
caused by failure to follow the operating instructions in the Kodak EasyShare digital
cameras and accessories User’s Guides.
This warranty does not apply when failure is due to shipping damage, accident,
alteration, modification, unauthorized service, misuse, abuse, use with incompatible
accessories or attachments, failure to follow Kodak’s operation, maintenance or
repacking instructions, failure to use items supplied by Kodak (such as adapters and
cables), or claims made after the duration of this warranty.
Kodak makes no other express or implied warranty for this product. In the event that
the exclusion of any implied warranty is ineffective under the law, the duration of the
implied warranty will be one year from the purchase date.
The option of replacement is Kodak’s only obligation. Kodak will not be responsible
for any special, consequential or incidental damages resulting from the sale, purchase,
or use of this product, regardless of the cause. Liability for any special, consequential
or incidental damages (including but not limited to loss of revenue or profit,
downtime costs, loss of the use of the equipment, cost of substitute equipment,
facilities or services, or claims of your customers for such damages resulting from the
purchase, use or failure of the product), regardless of cause or for breach of any
written or implied warranty is expressly disclaimed and excluded here from.
Your rights
Some states or jurisdictions do not allow exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you.
Some states or jurisdictions do not allow limitations on how long an implied warranty
lasts, so the above limitation may not apply to you.
This warranty gives you specific rights, and you may have other rights which vary from
state to state or by jurisdiction.
Outside the United States and Canada
In countries other than the United States and Canada, the terms and conditions of
this warranty may be different. Unless specific Kodak warranty is communicated to the
58
www.kodak.com/go/support
Appendix
purchaser in writing by a Kodak company, no warranty or liability exists beyond any
minimum requirements imposed by law, even though defect, damage, or loss may be
by negligence or other act.
Regulatory compliance
FCC compliance and advisory
Kodak EasyShare C310/CD40 digital camera
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed or used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures: 1) reorient
or relocate the receiving antenna; 2) increase the separation between the equipment
and the receiver; 3) connect the equipment to an outlet on a circuit different from that
to which the receiver is connected; 4) consult the dealer or an experienced radio/TV
technician for additional suggestions.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. Where shielded
interface cables have been provided with the product or specified additional
components or accessories elsewhere defined to be used with the installation of the
product, they must be used in order to ensure compliance with FCC regulation.
www.kodak.com/go/support
59
Appendix
Canadian DOC statement
DOC Class B Compliance—This Class B digital apparatus complies with Canadian
ICES-003.
Observation des normes-Class B—Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
Waste Electrical and Electronic Equipment labeling
In the European Union, do not discard this product as unsorted municipal waste.
Contact your local authorities or go to www.kodak.com/go/recycle for recycling
program information.
Korean Class B ITE
VCCI Class B ITE
English translation:
This is a Class B product based on the standard of the Voluntary Control Council for
Interference from Information Technology Equipment (VCCI). If this is used near a
radio or television receiver in a domestic environment, it may cause radio interference.
Install and use the equipment according to the instruction manual.
Australian C-Tick
N137
60
www.kodak.com/go/support
1
Index
A
AA battery, installing, 1
About, 27
accessories, 13
battery, 55
buying, 46
camera dock, 56
printer dock, 14, 56
SD/MMC card, 3
albums, tagging pictures for, 28, 29
alkaline batteries, warning, 1
Australian C-Tick regulatory
information, 60
auto
flash, 7
power-down, 53
B
batteries
expected life, 55
extending life, 55
loading, 1
types, 1, 51, 55
battery
safety, 54
battery compartment, ii
button
controller, ii
Delete, ii
delete, 5
Flash/Status, ii
flash/status, 7
www.kodak.com/go/support
Menu, ii
Review, ii
review, 7
Share, ii
shutter, i
zoom, 6
C
cable
audio/video, 20
USB, 13
camera dock, 56
camera screen, ii
error messages, 41
reviewing pictures, 7
reviewing videos, 7
turning Liveview default on/off, 26
Canadian compliance, 60
caring for your camera, 56
Class B ITE, 60
clock, setting, 2, 3, 26
Color Mode, 24
computer
connecting camera, 12, 13
transfer to, 12
controller buttons, ii
copy pictures
card to memory, 20
memory to card, 20
to computer via USB cable, 13
CRV3 battery
loading, 1
61
Index
customer support, 46
customizing camera settings, 25
D
date
displaying on video, 27
imprinting on pictures, 26
setting, 26
Date and Time, 26
date setting, 2, 3
Date Stamp, 26
Delete button, ii
deleting
during quickview, 5
formatting precaution, 27
from internal memory, 11
from SD/MMC card, 11
protecting pictures, videos, 10
digital zoom, 6
displaying slide show, 19
disposal, recycling, 57, 60
dock
camera, 56
printer, 14, 56
dock connector, ii
downloading pictures, 12
E
EasyShare software, 12
emailing pictures, videos, 32
error messages, 41
expected life, 55
Exposure Compensation, 23
external video device
62
setting video out, 26
viewing pictures, videos, 20
F
favorites
removing, 35
settings, 34
tagging, 33
FCC compliance, 59
firmware
finding version on camera, 27
firmware, upgrading, 56
flash, i
settings, 7
Flash/Status button, ii
Format, 27
formatting internal memory/card, 27
G
grip, i, ii
guidelines, battery, 55
H
help
camera, 36
EasyShare software, 46
support, 46
web links, 46
I
Image Storage, 24
setting storage location, 24
information
about camera, 27
installing
www.kodak.com/go/support
Index
batteries, 1
SD/MMC card, 3
software, 12
internal memory
formatting, 27
setting image storage location, 24
storage capacity, 52
K
Kodak digital camera batteries, 1
Kodak EasyShare software
getting help, 46
installing, 12
upgrading, 56
Kodak web sites, 46
Korean Class B ITE, 60
L
Language, 27
LCD (liquid crystal display), ii
lens, i
cleaning lens, 56
light
ready, ii, 44
Self Timer, i
video, i
Liveview, 26
turning default on/off, 26
loading
batteries, 1
SD/MMC card, 3
software, 12
M
Macintosh OS, installing software on, 12
www.kodak.com/go/support
maintenance, camera, 56
memory
inserting card, 3
internal, 24
removable card, 24
setting image storage location, 24
storage capacities, 52
Menu
button, ii
MMC card
formatting, 27
setting image storage location, 24
mode dial, i
movies. See videos
N
NTSC, video out setting, 26
O
OK button, ii
online prints, ordering, 16
P
PAL, video out setting, 26
PictBridge enabled printer, 14
Picture Quality, 24
pictures
checking settings, 8
copying, 20
deleting, 11
emailing tagged, 32
printing, 16
printing tagged, 31
protecting, 10
reviewing, 7
63
Index
storage capacity, 52
tagging, 28, 29
transfer via USB cable, 13
power
auto off, 53
camera, 2
switch, i
printer dock, 14, 56
printing
from a card, 16
from computer, 16
optimizing printer, 46
order online, 16
PictBridge enabled, 14
tagged pictures, 16
with EasyShare printer dock, 14
protecting pictures, videos, 10
Q
quickview
using, 5
R
ready light, ii, 44
recycling, disposal, 57, 60
red-eye, flash, 7
regulatory information, 59, 60
Class B ITE, 60
removing favorites, 35
Return, 26
Review button, ii
review button, 7
reviewing pictures
as you take them, 5
64
camera screen, 7
deleting, 11
protecting, 10
slide show, 19
reviewing videos
camera screen, 7
deleting, 11
protecting, 10
slide show, 19
running slide show, 19
S
safety
battery, 54
SD/MMC card
formatting, 27
inserting, 3
printing from, 16
setting image storage location, 24
storage capacities, 52
Self Timer, 23
light, i
self timer
with pictures, 18
service and support, telephone
numbers, 46
Set Album, 25
setting
album, 25
color mode, 24
date and time, 2, 3
date stamp, 26
date/time, 26
exposure compensation, 23
www.kodak.com/go/support
Index
flash, 7
image storage location, 24
language, 27
Liveview, 26
picture quality, 24
self timer, 18
video length, 25
video out, 26
setup mode, using, 25
Share button, ii
shutoff, auto, 53
shutter
self timer delay, 18
shutter button, i
shutter, problems, 37
sleep mode, 53
Slide Show
problems, 37
slide show
continuous loop, 20
running, 19
software
getting help, 46
installing, 12
upgrading, 56
specifications, camera, 49
status
camera ready light, 44
storage capacity, 52
support, technical, 46
T
tagging
favorites, 33
www.kodak.com/go/support
for email, 32
for print, 32
tagging pictures
for albums, 28, 29
television, slide show, 20
time, setting, 2, 3, 26
timer, shutter delay, 18
tips
battery guidelines, 55
care & maintenance, 56
transfer, via USB cable, 13
trash can, deleting, 5
tripod socket, ii
troubleshooting
camera, 36
camera/computer
communications, 40
error messages, 41
ready light status, 44
turning camera on and off, 2
U
upgrading software, firmware, 56
URLs, Kodak web sites, 46
USB (universal serial bus)
transferring pictures, 13
USB cable
camera port, ii
V
VCCI compliance, 60
Video Date Display, 27
Video Length, 25
Video Out, 26
65
Index
videos
checking settings, 8
copying, 20
deleting, 11
display date on, 27
emailing tagged, 32
protecting, 10
record light, i
reviewing, 7
setting recording time, 25
storage capacities, 52
transfer to computer, 12
viewing, 7
viewfinder, ii
lens, i
viewing
camera information, 27
viewing picture
after taking, 5, 7
W
warranty, 57
WEEE
Waste Electrical and Electronic
Equipment, 60
Windows OS-based computers
installing software, 12
wrist strap post, i
66
www.kodak.com/go/support