Instruction manual | Chrysler 2008 Automobile User Manual

KDV-U4349
KDV-U4349M
KDV-U4449
DVD-RECEIVER
INSTRUCTION MANUAL
© 2011 Kenwood Corporation All Rights Reserved.
B64-4818-00/00 (MW/M2W/XW)
Contents
Before use
For first use
3
7
Before using this unit for the first time
Language Setup
DSP Setup
Basic Operation of control panel
8
General functions
Tuner functions
DVD/ USB/ iPod play functions
Function Control/ Setup Menu
10
Clock/ Display Settings
14
Basic Operations of Remote Control 30
31
Accessories/ Installation Procedure 34
Connecting Wires to Terminals
35
Installation/Removing the Unit
36
Troubleshooting Guide
37
Specifications
39
15
Frequency Step Setting
Disc/ USB Operations of Remote
Control
25
Audio Control
Audio Setup
Preset Equalizer Select
Manual Equalizer Control
Position Control
Cabin Selection
Speaker Setting
X’Over Setting
DTA (Digital Time Alignment) Setting
Audio Preset Memory
Audio Preset Recall
Appendix
Manual Clock Adjustment
Text Display Selection
Auxiliary Input Display Setting
Theft Deterrent Faceplate
Tuner Operation
Audio Adjustments
16
Before Use
Playing a Disc
Playing a USB device
Basic Operation
Displaying Status and Control on-screen
DVD-VIDEO Disc Menu
DVD-VR Menu
Video CD PBC Menu
Zoom
Time Search
Direct Search
File Select
iPod Operations of Remote Control 20
Before Use
Playing the iPod
Search Mode
Music disc/Audio file/iPod Operation
of Control Panel
21
Music/Video Search
Music Search for iPod
iPod Control by Hand Mode
Basic Operation of Disc Changer (Optional)
Other Functions
Activating Security Code
Deactivating Security Code
2 |
24
About the functions by playback source
In this manual, functions that can be used with
various playback sources are indicated as follows:
DVD-VIDEO Function of DVD-VIDEO playback.
DVD-VR Function of DVD-VR playback.
Video CD Function of Video CD playback.
Function of CD (CD-DA) playback.
CD
Audio File Function of Audio file playback.
MPEG/DivX® Function of Video file playback.
Function of JPEG file playback.
JPEG
Function of iPod playback.
iPod
KDV-U4349/ KDV-U4349M/ KDV-U4449
Before use
2WARNING
To prevent injury or fire, take the following
precautions:
• To prevent a short circuit, never put or leave any
metallic objects (such as coins or metal tools) inside
the unit.
How to reset your unit
• If this unit or the connected unit (disc auto changer,
etc.) fails to operate properly, press the Reset button.
The unit returns to factory settings when the Reset
button is pressed.
• If you experience problems during installation,
consult your Kenwood dealer.
• When you purchase optional accessories, check with
your Kenwood dealer to make sure that they work
with your model and in your area.
• The characters which can be displayed by this unit
are A-Z 0-9 @ " ‘ ` % & * + – = , . / \ < > [ ] ( ) : ; ^ - { } |
~.
• The illustrations of the display and the panel
appearing in this manual are examples used to
explain more clearly how the controls are used.
Therefore, what appears on the display in the
illustrations may differ from what appears on the
display on the actual equipment, and some of the
illustrations on the display may be inapplicable.
Handling discs
Reset button
Cleaning the Unit
If the faceplate of this unit is stained, wipe it with a
dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain off with
a cloth moistened with neutral cleaner, then wipe it
again with a clean soft dry cloth.
¤
• Applying spray cleaner directly to the unit may affect its
mechanical parts. Wiping the faceplate with a hard cloth or
using a volatile liquid such as thinner or alcohol may scratch
the surface or erases characters.
• Do not touch the recording surface of the disc.
• Do not stick tape etc. on the disc, or use a disc with
tape stuck on it.
• Do not use disc type accessories.
• Clean from the center of the disc and move
outward.
• When removing discs from this unit, pull them out
horizontally.
• If the disc center hole or outside rim has burrs,
use the disc only after removing the burrs with a
ballpoint pen etc.
Discs that cannot be used
• Discs that are not round cannot be used.
Cleaning the Faceplate Terminals
If the terminals on the unit or faceplate get dirty, wipe
them with a clean soft dry cloth.
Lens Fogging
When you turn on the car heater in cold weather,
dew or condensation may form on the lens in the
DVD player of the unit. Called lens fogging, this
condensation on the lens may not allow discs to play.
In such a situation, remove the disc and wait for the
condensation to evaporate. If the unit still does not
operate normally after a while, consult your Kenwood
dealer.
• Discs with coloring on the recording surface or discs
that are dirty cannot be used.
• This unit can only play the CDs with
.
This unit may not correctly play discs which do not
have the mark.
• You cannot play a disc that has not been finalized.
(For the finalization process refer to your writing
software, and your recorder instruction manual.)
English |
3
Before use
List of playable discs
Disc
types
DVD
CD
Others
About Audio files
Standard
Support
DVD Video
DVD Audio
DVD-R
‡
×
‡
DVD-RW
‡
DVD+R
‡
DVD+RW
‡
DVD-R DL (Dual layer)
DVD+R DL (Double layer)
DVD-RAM
Music CD
CD-ROM
‡
‡
×
‡
‡
CD-R
‡
CD-RW
‡
DTS-CD
Video CD (VCD)
Super video CD
Photo CD
CD-EXTRA
×
‡
×
×
%
HDCD
%
CCCD
DualDisc
Super audio CD
×
×
%
Remark
DTS not supported.
⁄
MP3/WMA/WAV/JPEG/
MPEG/DivX Playback
Multi-border/Multisession/
(Playback depends on
authoring conditions)
Video mode supported
VR mode supported (Only
DVD-R/RW)
• If music of normal CD and other playback systems are
recorded in the same disc, only the playback system
recorded at the first setout is played.
Only video format
CD-TEXT
MP3/WMA/WAV/JPEG/
DivX playback
Multisession supported
Packet write not supported.
Only music CD session can
be played.
Sound quality of normal
CD music
Only CD layer can be
played.
‡ : Playback is possible.
% : Playback is partly possible.
× : Playback is impossible.
⁄
• When buying DRM enabled contents, check the
Registration Code in the <DivX registration> (page 13).
Registration Code changes each time a file with the
displayed Registration Code is played to protect against
copying.
Use of “DualDisc”
When playing a “DualDisc” on this unit, the surface of
the disc that is not played may be scratched while the
disc is inserted or ejected. Since the music CD surface
does not conform to the CD standard, playback may
be impossible.
(A “DualDisc” is a disc with one surface containing
DVD standard signals and the other surface
containing music CD signals.)
4 |
• Playable Audio file
MP3 (.mp3), WMA (.wma), Linear PCM (WAV) (.wav)
• Acceptable media
CD-R/RW/ROM, DVD±R/RW, mass-storage-class USB
device, iPod with KCA-iP102
• Playable disc file format
ISO 9660 Level 1/2, Joliet, Romeo.
• Playable USB device file system
FAT32, FAT16
Although the audio files are complied with the standards
listed above, the play maybe impossible depending on
the types or conditions of media or device.
• Playing order of the Audio file
In the example of folder/file tree shown below, the
files are played in the order from ① to ⑩.
(): Root
Root
<: Folder
v v : Audio file
file
<
v
v
v
v
v.
v
v
v
v
v
v.
An online manual about audio files is put on the
site, www.kenwood.com/audiofile/. On this online
manual, detailed information and notes which are
not written in this manual are provided. Make sure
to read through the online manual as well.
About Video files
• Acceptable video files
MPEG1, MPEG2, DivX
• Extensions
mpg, mpeg, divx, div, avi
• Acceptable media
CD-R/RW/ROM, DVD±R/RW, mass-storage-class USB
device, iPod with KCA-iP102
Acceptable discs, disc formats, USB device file system,
file and folder names and playing order are the same
as those for audio files. See <About Audio files>.
KDV-U4349/ KDV-U4349M/ KDV-U4449
About Picture files
About USB device
• Acceptable picture files
JPEG
• Extensions
jpg, jpeg
• Acceptable media
CD-R/RW/ROM, DVD±R/RW, mass-storage-class USB
device
Acceptable discs, disc formats, USB device file system,
file and folder names and playing order are the same
as those for audio files. See <About Audio files>.
• In this manual, the word “USB device” is used for
flash memories and digital audio players which have
USB terminals.
• When the USB device is connected to this unit,
it can be charged up provided that this unit is
powered.
• Install the USB device in the place where it will not
prevent you from driving your vehicle properly.
• You cannot connect a USB device via a USB hub and
Multi Card Reader.
• Take backups of the audio files used with this unit.
The files can be erased depending on the operating
conditions of the USB device.
We shall have no compensation for any damage
arising out of erasure of the stored data.
• No USB device comes with this unit. You need to
purchase a commercially available USB device.
• When connecting the USB device, usage of the
CA-U1EX (option) is recommended.
Normal playback is not guaranteed when a cable
other than the USB compatible cable is used.
Connecting a cable whose total length is longer
than 5 m can result in abnormal playback.
iPod/iPhone that can be connected to this
unit
Made for
• iPod nano (6th generation)
• iPod nano (5th generation)
• iPod nano (4th generation)
• iPod nano (3rd generation)
• iPod nano (2nd generation)
• iPod nano (1st generation)
• iPod with video
• iPod classic
• iPod touch (4th generation)
• iPod touch (3rd generation)
• iPod touch (2nd generation)
• iPod touch (1st generation)
• iPhone 4
• iPhone 3GS
• iPhone 3G
• iPhone
• For the latest compatible list and software version of
iPod/iPhone, see: www.kenwood.com/cs/ce/ipod
• You can control an iPod/iPhone from this unit by
connecting an iPod/iPhone (commercial product)
with Dock connector using an optional accessory
iPod connection cable (KCA-iP102). The word “iPod”
appearing in this manual indicates the iPod/iPhone
connected with the KCA-iP102 (optional accessory).
• By connecting your iPod/iPhone to this unit with
an optional accessory iPod connection cable (KCAiP102), you can supply power to your iPod/iPhone as
well as charge it while playing music. However, the
power of this unit must be on.
⁄
• If you start playback after connecting the iPod, the
music that has been played by the iPod is played
first.
• You cannot operate iPod if “KENWOOD” or “✓” is
displayed on the iPod.
• A video file stops playing if you switch to another
source while playing it. You cannot play from the
last playback position if you switch back to iPod.
English |
5
Before use
Region codes in the world
The DVD players are given a region code according to the country or area it is marketed, as shown in the
following map.
1
5
2
6
1
2
3
1
4
5
2
4
DVD disc marks
Operation regulatory marks
Symbol
With this DVD, some functions of this unit such as the
play function may be restricted depending on the
location where the DVD is playing. In this case, the
following marks will appear on the screen. For more
information, refer to the disc manual.
Description
ALL
Indicates a region number. The discs with this mark can
be played with any DVD player.
8
Indicates the number of audio languages recorded. Up
to 8 languages can be recorded in a movie. You can
select a favorite language.
32
Indicates the number of subtitled languages recorded.
Up to 32 languages can be recorded.
9
If a DVD disc has scenes shot from multiple angles, you
can select a favorite angle.
Indicates the type of screen for the image. The left mark
indicates that a wide image picture (16:9) is displayed
16:9 LB
on a standard TV set screen (4:3) with a black band at
both the top and bottom of the screen (letter box).
6 |
Prohibition Mark
Discs with limited period of use
Do not leave discs with a limited period of use in this
unit. If you load an already expired disc, you may not
be able to remove it from this unit.
KDV-U4349/ KDV-U4349M/ KDV-U4449
For first use
Before using this unit for the first
time
Demonstration mode setting
This unit is initially set on the Demonstration mode.
When using this unit for the first time, cancel the
Demonstration mode setting.
Display
“DEMO ON”
“DEMO OFF”
Setting
The Demonstration mode function is ON.
Cancel Demonstration mode (Normal mode).
TV system selection
You must select the appropriate system mode for
your TV system. When the selected system does not
coincide with the system of your TV, normal color
picture may not be displayed.
Display
“P/N PAL”
“P/N NTSC”
Setting
Select when the unit is connected with PAL-TV.
Select when the unit is connected with NTSC-TV.
1 Select Standby
Language Setup
Set a language used for screen display, DVD subtitles,
etc.
• “LANGUAGE” item of the Setup menu (page 13)
DSP Setup
To get clear sound, set the sound environment
according to the location and size of physically
installed speakers with reference to the followings:
• “MENU” > “SWPRE” of <Function Control> (page 10)
• Cabin selection (page 27)
• Speaker Setting (page 27)
• DTA (Digital Time Alignment) setting (page 28)
• X’Over setting (page 28)
⁄
• Setting “DSP SET” to “BYPASS” disables the settings related
to the DSP function. Refer to “DSP” > “DSP SET” of <Function
Control> (page 11).
Press the [SRC] button.
Select the “STANDBY” display.
2 Enter Function Control mode
Press the [ ] button for at least 1 second.
“FUNCTION” is displayed.
3 Enter Menu mode
Turn the [AUD] knob to select “MENU”.
Press the [AUD] knob.
4 Set the Demonstration mode
Turn the [AUD] knob to select “DEMO”.
Press the [AUD] knob for at least 2 seconds.
Select the “DEMO OFF” display.
5 Set the TV system
Turn the [AUD] knob to select “P/N”.
Press the [4] or [¢] button.
6 Exit Function Control mode
Press the [
] button for at least 1 second.
7 Turning OFF the Power
Press the [SRC] button for at least 1 second.
⁄
• These settings can be changed later.
English |
7
Basic Operation of control panel
[SRC] Release
[
]
[FM+] [AM–]
[DISP] [AUD]
Disc slot
[4] [¢]
[0]
USB Terminal
[1] [2] [3] [4] [5] [6] Auxiliary input
General functions
Tuner functions
Power/Source Select button: [SRC]
Turns on the power.
When the power is on, the source switches between
Tuner (“TUNER”), USB or iPod (“USB” or “iPod”),
DVD (“DVD”), Auxiliary input (“AUX”), and Standby
(“STANDBY”) each time this button is pressed.
Press at least 1 second to turn off the power.
FM band: [FM+]
Switches between FM1, FM2, and FM3 each time the
[FM+] button is pressed.
⁄
• When an optional accessory is connected, the source name
for each device appears.
AM band: [AM–]
Switches to AM.
Tuning: [4]/ [¢]
Changes the frequency.
⁄
Volume control: [AUD] knob
Turn the knob to adjust the volume.
• Use the “MENU” > “AUTO1”/ “AUTO2”/ “MANUAL” in
<Function Control> (page 11) to change the frequency
switching.
• During reception of stereo stations the “ST” indicator is ON.
Subwoofer output: [AM–]
Switches between ON (“SW ON”) and OFF (“SW OFF”)
each time this button is pressed for at least 2 seconds.
Preset memory: [1] - [6]
Memorizes the station selected when pressing for at
least 2 seconds.
• You can do this function when “SWPRE” in <Function
Control> (page 10) is set to “SW”.
Auto memory entry: [FM+]
Memorizes 6 stations with good reception
automatically when pressed for at least 2 seconds.
Auxiliary input
Connect a portable audio device with mini-plug
cable (3.5 ø).
Preset tuning: [1] - [6]
Recalls the memorized station.
⁄
⁄
• Use the mini-plug cable which is stereo type and does not
have any resistance.
• The AUX input requires the setting made in “MENU” > “AUX”
of <Function Control> (page 11).
Switching display: [DISP]
Changes the information displayed. Refer to page 14
for the details of the display setting.
Text/Title scroll: [DISP]
Scrolls the text display of a CD or audio files when
pressed for at least 1 second.
8 |
KDV-U4349/ KDV-U4349M/ KDV-U4449
DVD/ USB/ iPod play functions
Disc play: Disc slot
Starts playing when a disc is inserted.
When a disc is inserted, the “IN” indicator is ON.
⁄
• Do not attempt to insert a disc into the slot if another one
is already there.
• The unit can only play 12 cm (5 inch) discs. If you insert an
8 cm (3 inch) disc, it will get stuck inside and can cause the
unit to malfunction.
Disc ejection: [0]
⁄
• You can eject the disc for 10 minutes after switching off the
engine.
USB device/iPod play: USB Terminal
Connecting a USB device starts playback.
⁄
• For the playable audio file, video file, media, and devices,
refer to <About Audio file> (page 4), <About Video file>
(page 4).
USB device/ iPod removing
To disconnect the USB device/ iPod, stop the playback
by pressing the [1] button, and then disconnect the
USB device/ iPod.
Pause and play: [6]
Switches between pause and play each time this
button is pressed.
Stops playing: [1]
Track/File search: [4]/ [¢]
Changes the chapter/ track/ file when this button is
pressed.
Fast reverses or forwards the music while pressing.
Pressing these buttons for 5 seconds or longer
accelerates the speed of fast-forward or fast-reverse.
⁄
• For the iPod, the fast-forward or reverse speed does not
change.
Title/ Folder search DVD-VIDEO DVD-VR Audio File MPEG/DivX®
JPEG : [FM+]/ [AM–]
Changes the title/ folder.
Search mode Audio File C D MPEG/DivX® JPEG
iPod
: [ ]
After pressing this button, you can quickly search
songs with the [AUD] knob. See <Music/Video
Search> (page 21) for details.
Changing the audio channel Video CD : [2]
Changes the audio channel when this button is
pressed.
Repeat play: [4]
Each time you press the button, the Repeat Play
alternates between the modes.
DVD-VIDEO Chapter Repeat (“CHAP REP”), Title Repeat
(“TITL REP”) and OFF (“REP OFF”)
DVD-VR Chapter Repeat (“CHAP REP”), Program
Repeat (“PRG REP”) and OFF (“REP OFF”)
Video CD Track Repeat (“TRAC REP”) and OFF (“REP
OFF”) (Video CD: PBC Off)
CD
Audio File File Repeat (“FILE REP”), Folder Repeat (“FOLD
MPEG/DivX® REP”), and OFF (“REP OFF”)
JPEG Folder Repeat (“FOLD REP”) and OFF (“REP
OFF”)
iPod File Repeat (“REP ONE”), All Repeat (“REP ALL”),
and OFF (“REP OFF”)
⁄
• Set to “MENU” > “FILETYPE” > “USB” > “PIC” of the <Function
Control> (page 11) when you select USB and iPod source.
Random play Video CD Audio File CD MPEG/DivX® iPod
: [3]
Randomly plays the track/ file in the disc or folder.
When Random Play is turned on, “DISC RDM”/ “FOLD
RDM” is displayed.
⁄
•
iPod
: Disabled when VIDEO is being played.
All Random play Audio File MPEG/DivX® iPod : [3]
If you press this button for at least 3 seconds while
playing a file, all files in the media play at random
(“ALL RDM”).
Pressing the button again turns the random play off
(“RDM OFF”).
⁄
• The time required to turn on the all random function may
become longer depending on the number of songs in iPod
or the folder structure.
•
iPod : Turning on the all random function changes
the iPod browse item to “songs”. This browse item will not
change even if the all random function is turned off.
•
iPod : If the brows item is changed to search for
music while the all random function is on, the all random
function is turned off and the songs in the browse item are
played at random.
English |
9
Function Control/ Setup Menu
Function Control
Functions in the table below can be set up by using Function Control.
1 Enter Function Control mode
Press the [ ] button for at least 1 second.
“FUNCTION” is displayed.
Displayed item is depending on currently selected
source or mode. The mark in Condition column
shows the condition to which the item is displayed.
: Can be set in other than standby state.
: Can be set in standby state.
: Can be set only during playback of the iPod source.
(USB source used when the iPod is connected)
: Can be set during USB source.
: Can be set during DVD source.
: Can be set during Tuner source.
: Can be set during FM reception.
: Can be set while accessing AUX source.
: Can be set for sources other than the standby
source by setting “2ZON” of <Audio Setup> (page
25) to “ON”.
— : Can be set during all sources.
2 Select your desired setup item
Operation type
Movement between items
Selection of item
Return to previous item
Operation
Turn the [AUD] knob.
Press the [AUD] knob.
Press the [ ] button.
Repeat selection and determination until your
desired setup item is selected.
In this manual, the above selection is indicated as
Press [ ] 1sec., and select “MENU” > “ICON”.
Category
“iPodCTRL”
“DSP”
“MENU”
“RETURN”
Function of setup item
Condition
Allows you to set up iPod Control by Hand
Mode.
Allows you to set up the sound environment.
Allows you to set up the environment.
—
Exit Function Control mode.
—
3 Make a setting
Press the [AUD] knob or turn the [AUD] knob to
select a setting value, and then press the [AUD]
knob.
• The value of items with [AUD] mark can be set by
pressing the [AUD] knob.
• The value of items with [4/ ¢] mark can be
set by pressing the [4] or [¢] button.
• Some items require you to keep pressing the
[AUD] knob for 1 or 2 seconds to set. For these
items, the time during which you need to keep
pressing the [AUD] knob is displayed in the Entry
column in seconds.
⁄
• Refer to the respective page for information on how to
set the items with reference page number.
• Only the items available to the current source are
displayed.
• Strong electrical fields (such as from power lines) may
cause unstable sound quality when CRSC is turned ON.
In such a situation, turn it OFF.
*Factory setting
4 Exit Function Control mode
Press the [
] button for at least 1 second.
“MENU”
Item
“CODE SET”/
“CODE CLR”
“DIM”
Setting
Entry Setting overview
1 sec. Sets/Resets security code.
“OFF”*/ “ON”
4/ ¢
“ICON”
“OFF”/ “ON1”/
“ON2”*
“R”*/ “SW”/ “AV”
4/ ¢
Adjusts the brightness of the display according to the
surrounding illumination.
Sets the Graphics mode of the display.
4/ ¢
Sets the preout output.
“SWPRE”
10 |
Condition Page
24
—
—
32
32
KDV-U4349/ KDV-U4349M/ KDV-U4449
Item
“ZONE2”
Setting
“F”/ “R”*
Entry Setting overview
“AUTO1”/ “AUTO2”/
“MANUAL”
“CRSC”
“NAME SET”
“P/N”
“AUTO1”*/ “AUTO2”/
“MANUAL”
“OFF”/ “ON”*
4/ ¢
Specifies the destination of sub source sound when the Dual
Zone function is turned on.
Selects the tuning mode of the radio.
4/ ¢
Switches to Monaural to decrease noise when reception is poor.
“M/V”
“ABOOK”
“SKIP”
“iART”
4/ ¢
31
—
14
—
1 sec. Sets the display when switched to AUX source.
“PAL”/ “NTSC”
4/ ¢
“SL”/ “NM”/ “FA”
“0.5%”*/ “1%”/
“5%”/ “10%”
“OFF”/ “ON”*
4/ ¢
4/ ¢
4/ ¢
“FILETYPE” > “DISC” “A/V”/ “PIC”
> “USB”
4/ ¢
“SCL”
“AUX”
4/ ¢
“AUTO”*/ “MANU”
“OFF”/ “ON1”*/
“ON2”
“OFF”*/ “ON”
“DEMO”
“DIVX”
Condition Page
32
4/ ¢
Sets the color system for the monitor. You have to turn the power
off after the setting is changed.
Displays the firmware version of Microvision.
Sets the audio book playback speed.
Sets the ratio of skip performed with <Music/Video Search for
iPod>.
Specifies whether or not the artworks of the music files are
displayed.
Selects playback file type when a disc or USB contains different
types of files.
You can make advanced settings in the “FILE TYPE” of the Setup
menu. “A” or “V” may appear on the display after setting.
Specifies whether the text is scrolled automatically.
Sets whether to display AUX during source selection.
2 sec. Specifies whether to enable demonstration.
—
—
—
21
—
13
—
—
31
—
7
—
Display the format version of DivX.
“iPodCTRL”
Item
“iPodCTRL”
Setting
“HANDS ON”/
“MODE OFF”*
Entry Setting overview
AUD
When set to “HANDS ON”, allows you to operate iPod with the
control on the iPod.
Condition Page
22
“DSP”
Item
“CONTROL” “EQ”
“B.BOOST”
Setting
“OFF”*/
“STEP1”/ “2”
“HIGHWAY” “OFF”/
“STEP1”/ “2”/
“3”*/ “4”
“POSITION”
“SETUP”
AUD
AUD
[AUD]
“SPEAKER”
[AUD]
“DTA”
[AUD]
[AUD]
[AUD]
“MEMORY”
[AUD]
“BYPASS”/
“THROUGH”*
Sets the Bass Boost level in two steps.
Condition Page
25
—
Compensates the low volume or bass sound being lost by road
noises to make vocal sound clearer.
32
[AUD] Compensates the sound environment in accordance with the
“CABIN”
“X’OVER”
“PRESET” “RECALL”
“DSP SET”
Entry Setting overview
[AUD] Sets the sound quality.
AUD
26
listening position.
Selects the car type to compensate the distance difference
between each speaker.
Sets the connected speaker, speaker size, and installation
position.
Makes fine adjustment of the compensation value specified at
Cabin.
Makes fine adjustment of the X’Over value specified at Speaker.
Registering the value setup by Sound Control. Recalling the
sound setup registered by <Audio Preset Memory>.
Registering the value setup by Sound Control.
Setting “BYPASS” passes the DSP function.
Setting “THROUGH” activates the DSP function.
27
27
28
28
29
29
—
English |
11
Function Control/ Setup Menu
Setup menu of remote control
By using the Setup menu, you can make various adjustments to items such as picture and sound. You can
also set a language for the subtitles and the Setup menu, among other things.
1 Select DVD or USB source
Press the [SRC] button.
Select the “DVD” or “USB” display.
2 Press the [7] button.
3 Enter Setup menu mode
Press the [SETUP] button.
5 Press the [5]/[∞] button to select the desired
item, and then press the [ENTER] button.
✍ To cancel pop-up menu, press the [RETURN]
button.
6 Press the [5]/[∞] button to select the desired
setting, and then press the [ENTER] button to
confirm your selection.
7 Exit Setup menu mode
Press the [SETUP] button.
The Setup menu ends.
⁄
• The memory cannot be erased by the Reset button.
4 Press the [2]/[3] button to select the menu.
LANGUAGE/ PICTURE/ AUDIO/ OTHER
12 |
KDV-U4349/ KDV-U4349M/ KDV-U4449
LANGUAGE
Item
MENU LANGUAGE/
AUDIO LANGUAGE
SUBTITLE
ON SCREEN
LANGUAGE
Setting
Selects the initial disc menu language and audio language.
Refer to the language code list (page 33).
Selects the initial subtitle language or remove the subtitle (OFF). Refer to the language code list (page 33).
Selects a language for the setup menu and on screen display.
PICTURE
Item
MONITOR TYPE
OSD POSITION
iPod ARTWORK
Setting
• 16:9: Select when a 16:9 wide TV is connected.
• 4:3 LETTERBOX: Select when a standard 4:3 TV is connected. Displays a wide picture with bands on the
upper and lower portions of the screen.
• 4:3 PAN SCAN: Select when a standard 4:3 TV is connected. Automatically displays the wide picture on the
entire screen and cuts off the portions that do not fit.
Selects the on-screen bar position on the monitor.
• 1: Higher position.
• 2: Lower position (Guidance below the disc setup menu will disappear.)
• ON: Displays the artwork of your iPod.
• OFF: Does not display the artwork of your iPod.
AUDIO
Item
DOWN MIX
D.RANGE
COMPRESSION
Setting
• SURROUND COMPATIBLE: Uses multi-channel surround audio by connecting an amplifier compatible with
Dolby Surround.
• STEREO: Normally select this.
You can enjoy a powerful sound at low or middle volume levels while playing a Dolby Digital software.
• NORMAL: Reduce the dynamic range a little.
• WIDE: Enjoy a powerful sound at a low volume level with its full dynamic range.
• DIALOG: Reproduce the movie dialog more clearly.
OTHER
Item
Setting
DivX REGISTRATION This unit has its own Registration Code. Once you have played back a disc in which the Registration Code
recorded, this unit’s Registration Code is overwritten for copyright protection.
1. Press the [ENTER] button to show Code.
2. Press the [ENTER] button to exit.
⁄
FILE TYPE (DISC)/
FILE TYPE (USB)
• When downloading a DivX VOD file controlled by DRM, register the code appeared on the screen such as
the one above. Otherwise the file may not be able to play with this unit. Remaining number of viewing
is displayed when playing a DivX VOD file with the viewing restriction. When the remaining number of
viewing reached 0, a warning message appears and the file cannot be played.
Selects playback file type when a disc or USB contains different types of files.
• AUDIO: Play Audio file (MP3, WMA, WAV).
• STILL PICTURE: Play JPEG file.
• VIDEO: Play Video file (MPEG, DivX).
• AUDIO+VIDEO: Play Audio or Video file.
English |
13
Clock/ Display Settings
Manual Clock Adjustment
1 Select the Clock display
Press the [DISP] button.
2 Enter Clock adjustment mode
Press the [DISP] button for at least 1 second.
The clock display blinks.
3 Adjusting Clock
Operation type
Adjust the hours
Adjust the minutes
Operation
Press the [FM+] or [AM–] button.
Press the [4] or [¢] button.
4 Exit Clock adjustment mode
Text Display Selection
Changing displayed information on each source
following;
In Tuner source
Information
Frequency
Clock
Display
“FREQ”
“CLOCK”
In DVD/ Video CD source
Information
Title number & Chapter number/
Program number & Chapter number
Track number & Play time*2
Clock
Display
“TNO : CNO”*1
“PNO : CNO”*1
“P-TIME”
“CLOCK”
1
* DVD-VIDEO or DVD-VR only
*2 Track number and play time are not displayed with
Video CD PBC On.
Display
“D-TITLE”
“T-TITLE”
“P-TIME”
“CLOCK”
In Audio file/ Video file/ JPEG file source
Information
Display
Title & Artist name
“TITLE”*1
Album name & Artist name
“ALBUM”*1
Folder name
“FOLDER”
File name
“FILE”
Play time & File number*1
“P-TIME”
Clock
“CLOCK”
*1 “JPEG” is displayed when a file is JPEG.
14 |
Display
“TITLE”
“ALBUM”
“P-TIME”
“CLOCK”
In Standby/ Auxiliary input source
Information
Display
Source name
“SRC NAME”
Clock
“CLOCK”
Select the text
Press the [DISP] button.
⁄
Press the [DISP] button.
In CD & External disc source
Information
Disc title
Track title
Play time & Track number
Clock
In iPod source
Information
Music title & Artist name
Album name & Artist name
Play time & Music number
Clock
• When you select the clock display, the display setting of
each source will be changed to the clock display.
• If the selected display item does not have any
information, alternative information is displayed.
• If the iPod Control by Hand Mode is set to on while
playing the iPod, “iPodMODE” is displayed.
Auxiliary Input Display Setting
Selects the display when changing to Auxiliary
input source.
1 Select Auxiliary input source
Press the [SRC] button.
Select the “AUX” display.
2 Enter Auxiliary input display setting mode
Press [ ] 1 sec., and select “MENU” > “NAME
SET”.
Press the [AUD] knob for at least 1 second.
The presently selected Auxiliary input display is
displayed.
• For how to select Function Control items, refer to
<Function Control> (page 10).
3 Select the Auxiliary input display
Turn the [AUD] knob.
“AUX”/ “DVD”/ “PORTABLE”/ “GAME”/ “VIDEO”/ “TV”
4 Exit Auxiliary input display setting mode
Press the [
] button.
⁄
• When operation stops for 10 seconds, the name at that
time is registered, and the Auxiliary input display setting
mode closes.
• The Auxiliary input display can be set only when the
built-in auxiliary input or the auxiliary input of optional
KCA-S220A is used. On the KCA-S220A, “AUX EXT” is
displayed by default.
KDV-U4349/ KDV-U4349M/ KDV-U4449
Tuner Operation
Theft Deterrent Faceplate
Frequency Step Setting
The faceplate of the unit can be detached and taken
with you, helping to deter theft.
Changing the tuning frequency step.
The original setting is FM band 50 kHz, and AM
band 9 kHz.
Removing the Faceplate
Press the Release button.
The faceplate unlocks, allowing you to detach it.
¤
• The faceplate is a precision piece of equipment and can
be damaged by shocks or jolts.
• Keep the faceplate in its faceplate case while detached.
• Do not expose the faceplate (and the faceplate case) to
direct sunlight or excessive heat or humidity. Also avoid
places with too much dust or the possibility of water
splashing.
• To prevent deterioration, do not touch the terminals of
the unit or faceplate with your fingers.
Reattaching the Faceplate
Refer to the following diagram when
reattaching the faceplate.
1 Turn the power OFF
Press the [SRC] button for at least 1 second.
2 Switch the frequency step
While pressing the [1] and [5] buttons, press the
[SRC] button.
Release your fingers from the button after the
display appears.
The frequency step changes to FM band 200 kHz,
and AM band 10 kHz.
⁄
• When the same operation is repeated, the frequency
step returns to the original setting.
• When the frequency step is changed, the frequencies in
the memory are deleted.
English |
15
Disc/ USB Operations of Remote Control
Before Use
• Turn on the monitor to watch the playback picture.
If you turn on the monitor, you can also control
playback of other discs by referring to the monitor
screen.
• Set the remote controller mode switch to “DVD”
mode before starting operation, refer to <Remote
Controller mode switch> (page 30).
Playing a Disc
Inserting a disc in the unit
“READING” appears on the display, and playback
starts automatically.
✍ If playback does not start, press [38].
✍ In some cases, the disc menu might appear
instead.
⁄
• The menu screen may be displayed first after loading a DVD
or Video CD 2.0 which offers a menu.
• DVDs may have a region code. Your player does not play
discs that have a region code different from your player.
About the region code, refer to Region code (page 6).
• The playback file may be different depending on the file
type set for Audio, Video and JEPG files. (page 13)
Playing a USB device
Connecting the USB device
For a USB device that includes audio files, video
files, or photo files, “READING” appears in the
display, and playback starts automatically.
⁄
• The playback file may be different depending on the file
type set for Audio, Video and JEPG files. (page 13)
Basic Operation
Playing or pausing
Press the [38] button.
Stopping the play
Press the [7] button.
Searching for a chapter/ scene/ track/ file
Press the [4] or [¢] button.
Selecting a title/ folder DVD-VIDEO DVD-VR MPEG/DivX®
JPEG
Audio File
Press the [FM+] or [AM–] button.
16 |
Fast Forwarding or Fast Backwarding
Press the [1] or [¡] button repeatedly to
select the required speed.
x2, x5, x10, x20, x60 DVD-VIDEO DVD-VR Video CD
CD
Audio File
1, 2, 3 MPEG/DivX®
Slow Forwarding or Backwarding DVD-VIDEO DVD-VR
Video CD
1 Press the [38] button to pause.
2 Press the [1] or [¡] button repeatedly to
select the required speed.
1/32, 1/16, 1/8, 1/4, 1/2
⁄
• Slow motion playback in reverse is not possible with
DVD-VR or Video CDs.
Forward frame-by-frame playback DVD-VIDEO DVD-VR
Video CD
1 Press the [38] button to pause.
2 Press the [¢] button.
5 minutes skip MPEG/DivX®
Press the [2] or [3] button.
Skips from the head of a file at five-minute intervals.
Example: 1:23 = 5:00 = 10:00
⁄
• The operation is enabled when the Status and Control
bars are not displayed.
Camera angle DVD-VIDEO
If the disc contains scenes recorded at different
camera angles, you can change to a different
camera angle during playback.
Press the [ANGLE] button repeatedly during
playback to select a desired angle.
The number of the current angle appears on the
display.
Subtitles DVD-VIDEO DVD-VR MPEG/DivX®
Press the [SUBTITLE] button repeatedly
during playback to see the different subtitle
languages.
Changing the audio stream DVD-VIDEO DVD-VR
MPEG/DivX®
Press the [AUDIO] button repeatedly during
playback to hear a different audio stream.
Changing the audio channel Video CD
Press the [AUDIO] button repeatedly during
playback to hear a different audio channel
(STEREO, Left or Right).
KDV-U4349/ KDV-U4349M/ KDV-U4449
Displaying Status and Control
on-screen DVD-VIDEO DVD-VR Video CD MPEG/DivX®
JPEG
You can display various information about the disc
loaded on-screen.
Video CD
Example: DVD-VIDEO
Status bar
Control bar
Status bar
1 Disc type
2 DVD: Audio signal format type and channel
Video CD: PBC
3 Playback mode
“T.RPT” (Title/ Track repeat), “C.RPT” (Chapter
repeat), “PG.RPT” (Program repeat), “F.RPT”
(Folder repeat)
“F.RND” (Folder random), “A.RND” (All random)
4 Playback information
“T” (Title/ Track), “C” (Chapter), “PG” (Program),
“PL” (Play list), “F” (Folder/ File)
5 Time indication
6 Playback status
“3” (Play), “8” (Pause), “7” (Stop), “¡”/”1”
(Forward/reverse search), “ ”/” ” (Forward/
reverse slow-motion)
Control bar
Format
DVD-VIDEO
DVD-VR
Icon
MPEG/DivX®
JPEG
Changes the audio stream.
Changes the subtitle language.
Switches the Track time (“TIME”), remaining
track (“REM”), Disc time (“TOTAL”), and
remaining disc (“T.REM”).
Refer to <Time search> (page 18).*1
Direct Track Search.*1
Switches the Track repeat (“TRACK”), and repeat
off (“OFF”).*1
Switches the Disc random (“ALL”), and random
off (“OFF”).*1
Changes the audio channel.
Switches the File repeat (“TRACK”), Folder
repeat (“FOLDER”), and repeat off (“OFF”).
Switches the Folder random (“FOLDER”), All
random (“ALL”), and random off (“OFF”).
Changes the audio stream.
Changes the subtitle language.
Switches the Folder repeat (“FOLDER”), and
repeat off (“OFF”).
*1 While PBC is not in use.
1 Press the [OSD] button during playback.
Pressing the button repeatedly selects Status bar,
Status & Control bar, and Status bar off sequentially.
2 Press the [2] or [3] button during control bar
on-screen to select an item. Press the [ENTER]
button.
✍ To cancel pop-up menu, press the [RETURN]
button.
3 Press the [5] or [∞] button to change or select
Operation
Switches the Chapter time (“TIME”), remaining
chapter (“REM”), Title time (“TOTAL”), and
remaining title (“T.REM”).
Refer to <Time search> (page 18).
Direct Title Search.
Direct Chapter Search.
Switches the Chapter repeat (“CHAPTER”), Title
repeat (“TITLE”), and repeat off (“OFF”).
Changes the audio stream.
Changes the subtitle language.
Changes the camera angle.
Switches the Program/ Play list time (“TOTAL”),
remaining program/ play list (“T.REM”).
Refer to <Time search> (page 18).
Direct Chapter Search.
Switches the Chapter repeat (“CHAPTER”),
Program repeat (“PROGRAM”), and repeat off
(“OFF”).
the setting. Press the [ENTER] button.
English |
17
Disc/ USB Operations of Remote Control
DVD-VIDEO Disc Menu
Zoom
DVDs may offer menus that allow you to access
special features.
The zoom function allows you to enlarge the video
image.
1 Press the [MENU] button
DVD-VIDEO DVD-VR
The disc menu is displayed.
2 Use the [5]/[∞]/[2]/[3] button to highlight
your selection, then press the [ENTER] button.
3 To return to the first menu feature, press the
[TOP MENU] button again.
4 To remove the disc menu, press the [MENU]
button again.
DVD-VR Menu
Selects an option from the DVD-VR Disc menu.
1 Press the necessary operation button
In case of Program list : [TOP MENU]
In case of Play list : [MENU]
Video CD
MPEG
Press the [ZOOM] button repeatedly during
playback or in the pause mode to enlarge the
image.
OFF, 1 – 6
✍ You can move through the zoomed picture
using [5]/[∞]/[2]/[3].
JPEG
1 Press the [38] button to pause
2 Press the [ZOOM] button repeatedly to
enlarge the image
OFF, 1, 2
✍ You can move through the zoomed picture
using [5]/[∞]/[2]/[3].
Time Search DVD-VIDEO
DVD-VR
Video CD
The Time Search function allows you to start playing
at any chosen time on the disc.
1 Press the [OSD] button twice briefly during
playback
2 Press the [2] or [3] button to select the Time
2 Use the [5] or [∞] button to highlight your
selection, then press the [ENTER] button
✍ To remove the disc menu, press the [MENU]
button or the [TOP MENU] button again
Video CD PBC Menu
Press [RETURN] to return to the menu screen.
Menu settings and operating procedures may
differ. Follow the instructions on the each menu
screen.
Search icon in the on-screen display. Press the
[ENTER] button.
The “_: _ _: _ _” appears in the Time Search box.
3 Press the [5] or [∞] button to change the
number, then press the [2] or [3] button to
move to the next entry
4 Press the [ENTER] button to confirm the start
time
Playback starts from the selected time on the disc.
✍ If you enter an invalid time, playback will
continue from the current point.
Canceling the PBC playback
1 Press the [7] button to stop
2 Press the [DIRECT] button
3 Press the number buttons
4 Press the [ENTER] button
✍ To resume PBC, press [TOP MENU] or [MENU].
18 |
Direct Search
Searching the chapter by entering the number.
1 Select the search mode
Press the [DIRECT] button.
Each time you press the button, the search mode
alternates between the modes.
KDV-U4349/ KDV-U4349M/ KDV-U4449
DVD-VIDEO Chapter search (“CHAP”), Title search
(“TITL”), and Search mode off.
DVD-VR Chapter search (“CHAP”), Program/Play
list search (“PRGM”/ ”PLST”), and Search
mode off.
Video CD Track search (“TRAC”/“NMBR”*) and Search
mode off. *PBC ON only for VCD
CD
MPEG/DivX® Track search (“TRAC” or “Track Search”),
Audio File Folder search (“FOLD” or “Folder Search”),
JPEG
and Search mode off.
File search (“FILE”, “TRAC” or “Track Search”),
Folder search (“FOLD” or “Folder Search”),
and Search mode off when pressed while
playing a JPEG.
⁄
• Direct Search cannot be performed during Random play.
• The Search mode is cleared automatically after
approximately 5 seconds.
• “0” is not displayed in the first digit by pressing the [0]
button.
Example: “- -” = Press [0], [2] = “- 2”.
JPEG
Audio File
Press the [OSD] button.
2 Press the [2] or [3] button to select a
playback mode Audio File
“REPEAT”/ “RANDOM”
CD
*1 Not selectable for JPEG
*2 Not selectable for CD
4 Press the [ENTER] button
List screen
3 Select an item from the folder list
Press the [7] button to stop.
Automatically appear during
play.
2 Press [2] or [3] to select “Folder” column or
“Track” column MPEG/DivX® JPEG
“REPEAT”: Track/File repeat*1 (“TRACK”), Folder
repeat*2 (“FOLDER”), and repeat off
(“OFF”).
“RANDOM”*1: Folder random (“FOLDER”), All
random (“ALL”), and random off
(“OFF”).
Press the [MENU] or [TOP MENU] button.
1 Show the control screen
Audio File
3 Press the [5] or [∞] button to select a folder or
track
Use [5]/[∞]/[2]/[3] to highlight your selection,
and then press the [ENTER] button.
4 Select a track to start playing
Use [5]/[∞]/[2]/[3] to highlight your selection,
and then press the [ENTER] or [3] button.
✍ To go back to the folder list, press the [RETURN]
button.
5 To remove the List screen, press the [MENU]
4 Start playback
MPEG/DivX®
Audio File
1 Show the Playback mode selection screen
1 Press the [7] button to stop
2 Show the list screen
1 Folder list
2 Track information
3 Track list
JPEG
CD
To select a playback mode
CD
You can select a file from the list display.
MPEG/DivX®
Audio File
• An image is displayed at the folder list position when an
album art is attached to the tag of a playing audio file.
3 Press the [5] or [∞] button to select an item
2 Press the number buttons
3 Press the [ENTER] button
File Select MPEG/DivX®
⁄
JPEG
CD
button again.
Press the [ENTER] button.
Playback starts automatically.
English |
19
iPod Operations of Remote Control
Before Use
• Video output setting of iPod needs to be set on
your iPod.
• Turn on the monitor to watch the playback picture.
If you turn on the monitor, you can also control
playback of other discs by referring to the monitor
screen.
• Set the remote controller mode switch to “DVD”
mode before starting operation, refer to <Remote
Controller mode switch> (page 30).
Playing the iPod
Connecting the iPod
“READING” appears in the display, and playback
starts automatically.
Playing or pausing
Press the [38] button.
3 Search for music
Operation type
Movement between items
Selection of item
Return to previous item
Return to Top menu
Cancelling the Search mode
Operation
Press the [5] or [∞] button.
Press the [ENTER] or [3] button.
Press the [2] or [MENU] button.
Press the [TOP MENU] button.
Press the [RETURN] button.
⁄
• An image is displayed in the category list when a playing
song has artwork with “MENU” > “iART” (page 11) of the
<Function Control> set to ON.
• It takes some seconds to read artwork. You cannot
operate during the read operation.
To select a playback mode
1 Show the Playback mode selection screen
Press the [OSD] button.
Stopping the play
Press the [7] button.
Searching for a file
Press the [4] or [¢] button.
Fast Forwarding or Fast Backwarding
Press the [1] or [¡] button.
Search Mode
You can select a file from the list display.
2 Select a playback mode
Press the [2] or [3] button.
“REPEAT”/ “RANDOM”/ “AUDIO BOOK”
3 Select an item
Press the [5] or [∞] button.
“REPEAT”: File repeat (“ONE”), All repeat (“ALL”), and
repeat off (“OFF”).
“RANDOM”: Song random (“SONGS”), Album
random (“ALBUMS”), and random off
(“OFF”).
“AUDIO BOOK”: Normal speed (“NORMAL”), Faster
speed (“FASTER”), and Slower speed
(“SLOWER”).
4 Press the [ENTER] button
1 Category list
2 Track information
3 Track list
1 Enter Search mode
Press the [TOP MENU] or [MENU] button.
2 Select an menu item
Press the [5] or [∞] button to select an menu
Music/ Shuffle Songs
20 |
KDV-U4349/ KDV-U4349M/ KDV-U4449
Music disc/Audio file/iPod Operation of Control Panel
Music/Video Search
Audio File
CD
MPEG/DivX®
Search for the song (in iPod) you want to play.
JPEG
Selecting the track/ file you want to listen to from
the device or media being played now.
1 Enter Music/Video Search mode
Press the [ ] button.
“SEARCH” is displayed.
Displays the current Audio file name.
2 Search for track/ file
Audio File MPEG/DivX®
Music Search for iPod
JPEG
Operation type
Movement between
folders/files
Selection of folder/flie
Return to previous folder
Return to root folder
Operation
Turn the [AUD] knob, or press the [FM+]/
[AM–] button.
Press the [AUD] knob or [¢] button.
Press the [4] button.
Press the [4] button for at least 1
second.
: Indicates that your selection is a folder.
: Indicates that your selection is a file.
✍ The folder tree is not displayed and only folders
with files are displayed in order. Refer to <Playing
order of the Audio file> (page 4).
CD
Operation type
Operation
Movement between track Turn the [AUD] knob, or press the [FM+]/
[AM–] button.
Selection of track
Press the [AUD] knob.
Return to first track
Press the [4] button for at least 1
second.
Cancelling the Music/Video Search mode
Press the [ ] button.
⁄
• Music/Video Search cannot be performed during
Random play.
1 Enter Music Search mode
Press the [ ] button.
“SEARCH” is displayed.
2 Search for song
Operation type
Movement between items
Skip Search *1
Selection of item
Return to previous item
Return to Top menu
Search by initial
Operation
Turn the [AUD] knob.
Press the [4] or [¢] button.
Press the [AUD] knob.
Press the [FM+] button.
Press the [FM+] button for at least 1
second.
Press the [ ] button for at least 1 second.
The position of the currently displayed item is
indicated by the icon bar in eight steps.
Cancelling the Music Search mode
Press the [ ] button.
Searching for Music by Initial
You can select an alphabetic character from the list
in the browse item (artist, album, etc.) selected now.
1 Enter alphabet search mode
Press the [ ] button for at least 1 second.
“A B C …” is displayed.
• If you can not search for a song by an alphabetic
character in the browse item selected now, the data on
the screen does not change.
2 Select the initial to be searched for
Operation type
Move to the next character.
Move to the next row.
Cancelling the alphabet
search mode
Operation
Turn the [AUD] knob, or press the
[4]/ [¢] button.
Press the [FM+] or [AM–] button.
Press the [ ] button.
3 Determine the selected initial
Press the [AUD] knob.
Start search. When search is completed, the Music
Search mode is selected again at the selected
character position.
Next page 3
English | 21
Music disc/Audio file/iPod Operation of Control Panel
⁄
iPod Control by Hand Mode
• *1 Skip Search: The number of songs to be skipped is
determined by the ratio of the total number of songs
in the list which is selected now. Set the ratio with
“SKIP” in <Function Control> (page 11). Keep pressing
this button for 3 seconds or longer skips songs at 10%
irrespective of the setting.
• The time of search by alphabet may become long
depending on the number of songs in iPod or the folder
structure.
• When selecting an initial in the alphabet search mode,
entering “*” searches symbols and entering “1” searches
digits.
• If the first character string begins with an article “a”, “an”,
or “the” in the alphabet search mode, it is searched for in
defiance of the article.
Allows you to operate iPod with the control on the
iPod.
Display
“HANDS ON”
“MODE OFF”
Setting
iPod control by hand mode is ON.
iPod control by hand mode is OFF.
1 Enter iPod Control by Hand Mode
Press [ ] 1 sec., and select “iPodCTRL”.
Press the [AUD] knob.
• For how to select Function Control items, refer to
<Function Control> (page 10).
2 Set the iPod Control by Hand Mode
Turn the [AUD] knob.
3 Exit iPod Control by Hand Mode
Press the [
] button.
⁄
• In the iPod Control by hand mode, iPod cannot be
operated using this unit.
• This mode is not compatible with music information
display. The display will show “iPodMODE”.
• The following iPods cannot be controlled using this unit.
iPod nano (1st generation), and iPod with video. (KCAiP102 (optional accessory) connected only.)
• When you cancel the hand mode while playing a video
file, the video file stops and a music file starts.
22 |
KDV-U4349/ KDV-U4349M/ KDV-U4449
Basic Operation of Disc Changer
(Optional)
Selecting CD changer source
Press the [SRC] button.
Select the “CD CH” display.
Playing or pausing
Press the [6] button.
Music search
Press the [4] or [¢] button.
Changes the music when this button is pressed.
Fast reverses or forwards the music while pressing.
Disc Search
Press the [FM+] or [AM–] button.
Playing the Current Song or Disc Repeatedly
(Repeat play)
Press the [4] button.
Pressing the button repeatedly selects Track Repeat
play on (“TRAC REP”), Disc Repeat play on (“DISC
REP”), and Repeat play off (“REP OFF”) sequentially.
Playing the first part of each music on the disc
(Scan play)
Press the [2] button.
Successively plays the intro of the music in the disc.
When Scan Play is turned on, “TRAK SCN” is
displayed.
3. Press the [4] or [¢] button.
✍ Press the [38] button to cancelling Direct
Music Search.
⁄
• Direct Music Search cannot be performed during playing
of Random play, or scan play.
Searching the disc by entering the disc number
(Direct Disc Search)
1 Set the remote controller mode switch to
“AUD” mode
2. Press the number buttons on the remote
control.
3. Press the [FM+] or [AM–] button.
✍ Press the [38] button to cancelling Direct
Disc Search.
⁄
• Direct Disc Search cannot be performed during playing
of Random play, or scan play.
• Input “0” to select disc 10.
⁄
• Set the remote controller mode switch to “AUD” mode
before starting operation, refer to <Remote Controller mode
switch> (page 30).
⁄
• To use the functions written as the [SCN] button in the
option manual, press the [2] button.
Playing all the music on the disc in random
order (Random play)
Press the [3] button.
Randomly plays the music in the disc.
When Random Play is turned on, “DISC RDM” is
displayed.
Playing the music in the disc changer randomly
(Magazine random play)
Press the [5] button.
Pressing the button toggles the setting between
Magazine random play on (“MGZN RDM”) and off
(“RDM OFF”).
Searching the music by entering the track
number (Direct Music Search)
1 Set the remote controller mode switch to
“AUD” mode
2. Press the number buttons on the remote
control.
English |
23
Other Functions
Activating Security Code
When Security Code is set, possibility of theft
is reduced because input of Security Code is
prompted to turn on the unit once it is turned off.
⁄
• You can set the Security Code with a 4 digit number of your
choice.
• The Security Code cannot be displayed or referenced. Make
a note of the Security Code and treasure it up.
Entering Security Code
The Security Code is required to use the audio unit
when the unit is first used after removed from the
battery power source or the Reset button is pressed.
1 Turn the power ON.
2 Do the step 3 through 4 operation, and enter
the Security Code.
“APPROVED” is displayed.
Now, you can use the unit.
1 Select Standby
Press the [SRC] button.
Select the “STANDBY” display.
2 Enter Security Code mode
Press [ ] 1 sec., and select “MENU” > “CODE SET”.
Press the [AUD] knob for at least 1 second.
When “ENTER” is displayed, “CODE” is also displayed.
• For how to select Function Control items, refer to
<Function Control> (page 10).
3 Enter Security Code
Operation type
Select the digits to enter
Select the Security Code
numbers
Operation
Press the [4] or [¢] button.
Turn the [AUD] knob, or press the
[FM+]/ [AM–] button.
4 Confirm the Security Code
Press the [AUD] knob for at least 3 seconds.
When “RE-ENTER” is displayed, “CODE” is also
displayed.
5 Do the step 3 through 4 operation, and reenter
the Security Code.
“APPROVED” is displayed.
The Security Code function activates.
⁄
• If you enter the wrong Code in steps 3 through 4, repeat
from step 3.
• When the Security Code function is activated, “CODE
SET” changes to “CODE CLR”.
• To deactivate the Security Code function, see the next
section <Deactivating Security Code>.
Deactivating Security Code
Deactivating the Security Code function.
1 Select Standby
Press the [SRC] button.
Select the “STANDBY” display.
2 Enter Security Code mode
Press [ ] 1 sec., and select “MENU” > “CODE CLR”.
Press the [AUD] knob for at least 1 second.
When “ENTER” is displayed, “CODE CLR” is also
displayed.
• For how to select Function Control items, refer to
<Function Control> (page 10).
3 Enter Security Code
Operation type
Select the digits to enter
Select the Security Code
numbers
Operation
Press the [4] or [¢] button.
Turn the [AUD] knob, or press the
[FM+]/ [AM–] button.
4 Press the [AUD] knob for at least 3 seconds.
“CLEAR” is displayed.
The Security Code function deactivates.
5 Exit Security Code mode
Press the [
] button.
6 Exit Security Code mode
Press the [
24 |
] button.
KDV-U4349/ KDV-U4349M/ KDV-U4449
Audio Adjustments
Audio Control
You can adjust following Audio Control items ;
Adjustment Item Display
Range
Rear volume
“R-VOL”
0 — 35
AV output volume “AVVOL”
0 — 35
Subwoofer level
“SW L”
–15 — +15
Balance
“BAL”
Left 15 — Right 15
Fader
“FAD”
Rear 15 — Front 15
Exit Audio Control mode (Volume control mode)
1 Select the source to adjust
• AV output source
The sub source (DVD, USB) can be output to the AV
output separately from the main source.
- Set the preout to “AV” in “MENU” > “SWPRE” (page 10) of
<Function Control>.
- Adjust the volume of AV output source by <Audio
Control> (page 25).
- “USB” and “DVD” cannot be set at the same time for the
main and AV output sources.
• Dual Zone System and the AV output source cannot
be used at the same time. Turn off the setting currently
used and then set the next function.
1 Select the source to adjust
Press the [SRC] button.
Press the [SRC] button.
2 Enter Audio Control mode
2 Enter Audio Setup mode
Press the [AUD] knob.
Press the [AUD] knob for at least 1 second.
3 Select the Audio item to adjust
Press the [AUD] knob.
3 Select the Audio Setup item to adjust
Press the [AUD] knob.
4 Adjust the Audio item
4 Adjust the Audio setup item
Turn the [AUD] knob.
Turn the [AUD] knob.
5 Exit Audio Control mode
Press any button.
Press a button other than the [AUD] knob or [0]
button.
5 Exit Audio Setup mode
Press the [AUD] knob for at least 1 second.
Audio Setup
Preset Equalizer Select
You can set Sound system, such as follows;
You can select following Equalizer curve;
Adjustment Item
Volume offset
Dual Zone System
AV output source
Display
“V-OFF”
“2ZON”
“AV/O”
Range
–8 — ±0 (AUX: -8— +8)
OFF/ DVD/ USB/ AUX
OFF/ DVD/ USB
⁄
• Volume offset: Sets each source’s volume as a difference
from the basic volume.
• Dual Zone System
Main source and sub source (DVD, USB, AUX) output
Front channel and Rear channel separately.
- Set the preout to “R” or “SW” in “MENU” > “SWPRE” (page
10) of <Function Control>.
- Set up the channel of sub source by “ZONE2” of
<Function Control> (page 11).
- Select Main source by [SRC] button.
- Adjust the volume of Front channel by [AUD] knob.
- Adjust the volume of Rear channel by <Audio
Control> (page 25) or [5]/[∞] button on the remote
control (page 30).
- The Audio Control has no effect on sub source.
- “USB” and “DVD” cannot be set at the same time for the
main and sub sources.
Preset Equalizer
User*
Rock
Pops
Easy
Top 40
Display
“USER”
“ROCK”
“POPS”
“EASY”
“TOP40”
Preset Equalizer
Jazz
Game
iPod (During iPod
source only)
Natural
Display
“JAZZ”
“GAME”
“iPod”
“NATURAL”
* The Equalizer curve set in the section <Manual Equalizer
Control> is recalled.
1 Enter Preset Equalizer mode
Press [ ] 1 sec., and select “DSP” > “CONTROL” >
“EQ” > “PRESET”.
Press the [AUD] knob.
• For how to select Function Control items, refer to
<Function Control> (page 11).
2 Select the Equalizer curve
Turn the [AUD] knob and push the center when
the desired item is displayed.
You can select from 22 Equalizer curve types for
iPod when “iPod” is selected.
Next page 3
English | 25
Audio Adjustments
Select the iPod Equalizer curve
1. Enter iPod Equalizer mode
Press the [AUD] knob.
2. Select the iPod Equalizer curve
Turn the [AUD] knob and push the center when
the desired item is displayed.
3 Exit Preset Equalizer mode.
Press the [
] button.
⁄
• You can select for each source.
Manual Equalizer Control
You can adjust following Equalizer Control items;
Adjustment Item
Band level “BAND#” > “GAIN”
Bass Effect* “BAND1” > “EFFECT”
Range
-9 – 0 – +9
“OFF”/ “ON”
• *Can be only set for “BAND1”.
1 Enter Manual Equalizer Control mode
Press [ ] 1 sec., and select “DSP” > “CONTROL” >
“EQ” > “MANUAL”.
Press the [AUD] knob.
• For how to select Function Control items, refer to
<Function Control> (page 10).
2 Select the band you want to set
Turn the [AUD] knob and push the center.
“BAND1” – “BAND5”
3 Select the item you want to set
Turn the [AUD] knob and push the center.
4 Set the value
Turn the [AUD] knob and push the center when
the desired item is displayed.
5 Exit Manual Equalizer Control mode
Press the [
] button twice.
⁄
Manual position “MANUAL”
Adjustment Item Display
Adjustment Item
Front Left speaker
“F-LEFT”
Subwoofer Left
Front Right speaker “F-RIGHT” Subwoofer Right
Rear Left speaker
“R-LEFT”
Initialize the setting
Rear Right speaker “R-RIGHT” values.
Display
“SW-LEFT”
“SW-RIGHT”
“INITIAL”
1 Enter Preset position setting mode
Press [ ] 1 sec., and select “DSP” > “CONTROL” >
“POSITION” > “PRESET”.
Press the [AUD] knob.
• For how to select Function Control items, refer to
<Function Control> (page 10).
2 Select the seat you want to compensate
Turn the [AUD] knob and push the center when
the desired item is displayed.
3 Exit Preset position setting mode
Press the [
] button.
You can fine-adjust your listening position.
1 Enter Manual position adjust mode
Press [ ] 1 sec., and select “DSP” > “CONTROL” >
“POSITION” > “MANUAL”.
Press the [AUD] knob.
2 Select the speaker you want to set
Turn the [AUD] knob and push the center.
✍ Selecting “INITIAL” initializes the Manual position
adjustment.
3 Set the value
Turn the [AUD] knob and push the center when
the desired value is displayed.
Adjust between 0 and 170 cm.
4 Exit Manual position adjust mode
• When “iPod” is selected in the section <Preset Equalizer
select> (page 25), Manual Equalizer Control is disabled.
• You can select for each source.
Position Control
According to the listening position, select the
position from the following settings so that the
normal position of the sound environment can
be compensated in accordance with the selected
position;
26 |
Preset position “PRESET”
Adjustment Item Display
Adjustment Item Display
Not compensating. “ALL”
Front-Right seat
“F-RIGHT”
Front-Left seat
“F-LEFT”
Front seat
“F-ALL”
Press the [
] button twice.
⁄
• About the position setting
First, set the using environment with <DTA (Digital Time
Alignment) Setting> (page 28).
• When using the Subwoofer Left and Subwoofer Right as
a single sub woofer, set the left side and right side to the
same value.
KDV-U4349/ KDV-U4349M/ KDV-U4449
Cabin Selection
Speaker Setting
You can compensate the delay of the sound arrival
time by selecting your environment from the
following car types;
Setting the speaker to be connected, speaker size,
and installation position;
Car type
Not compensating.
Compact car
Full size car
Station wagon
Display
“OFF”
“COMPACT”
“FULLSIZE”
“WAGON”
Car type
Minivan
Sport-utility vehicle
Minivan long
Display
“MINIVAN”
“SUV”
“MV LONG”
1 Enter Cabin select mode
Press [ ] 1 sec., and select “DSP” > “SETUP” >
“CABIN”.
Press the [AUD] knob.
• For how to select Function Control items, refer to
<Function Control> (page 10).
2 Select the car type
Turn the [AUD] knob and push the center when
the desired item is displayed.
3 Exit Cabin select mode
Press the [
] button.
⁄
• You can compensate the distances in more details by
using <DTA setting> (page 28) function.
Setting item
Front Speaker Location
“FRONT” > “LOCATION”
Front Speaker Size
“FRONT” > “SIZE”
Front Tweeter
“FRONT” > “TWEETER”
Rear Speaker Location
“REAR” > “LOCATION”
Rear Speaker Size
“REAR” > “SIZE”
Subwoofer Size
“SUB-W” > “SIZE”
Range
“DOOR”/ “ON DASH”/ “UND DASH” (Under
dash)
O.E.M./ 10 cm/ 13 cm/ 16 cm/ 17 cm/ 18
cm/ 4×6/ 5×7/ 6×8/ 6×9/ 7×10
“NONE”/ “USE”
• “DOOR”/ “R-DECK”
• “2ND ROW”/ “3RD ROW” (Minivan/
Minivan long)
None/ O.E.M./ 10 cm/ 13 cm/ 16 cm/
17 cm/ 18 cm/ 4×6/ 5×7/ 6×8/ 6×9/
7×10
None/ 16 cm/ 20 cm/ 25 cm/ 30 cm/
38 cm over
1 Enter Speaker Setting mode
Press [ ] 1 sec., and select “DSP” > “SETUP” >
“SPEAKER”.
Press the [AUD] knob.
• For how to select Function Control items, refer to
<Function Control> (page 10).
2 Select the speaker you want to set
Turn the [AUD] knob and push the center.
“FRONT”/ “REAR”/ “SUB-W”
3 Select the item you want to set
Turn the [AUD] knob and push the center.
4 Set the value
Turn the [AUD] knob and push the center when
the desired item is displayed.
5 Exit Speaker Setting mode
Press the [
] button twice.
English |
27
Audio Adjustments
X’Over Setting
DTA (Digital Time Alignment) Setting
You can set a X’Over value for the speakers;
Adjusting fine tuning of the speaker position
compensation value specified at <Cabin selection>
(page 27).
Setting item
Front High Pass Filter
“FRONT” > “FC”
Rear High Pass Filter
“REAR” > “FC”
Front High Pass Slope
“FRONT” > “SLOPE”
Rear High Pass Slope
“REAR” > “SLOPE”
Subwoofer Low Pass Filter
“SUB-W” > “FC”
Subwoofer Low Pass Slope
“SUB-W” > “SLOPE”
Subwoofer Phase
“SUB-W” > “PHASE”
Range
“THRU” (Through)/ 30/ 40 / 50/
60/ 70/ 80/ 90/ 100/ 120/ 150/
180/ 220/ 250 Hz
-6/ -12/ -18/ -24 dB/Oct.
1 Enter DTA setting mode
Press [ ] 1 sec., and select “DSP” > “SETUP” >
“DTA”.
Press the [AUD] knob.
• For how to select Function Control items, refer to
<Function Control> (page 10).
30/ 40/ 50/ 60/ 70/ 80/ 90/ 100/
120/ 150/ 180/ 220/ 250 Hz/
“THRU” (Through)
-6/ -12/ -18/ -24 dB/Oct.
2 Select the speaker you want to set
REVERSE (180°)/ NORMAL (0°)
3 Set the compensation value of the speaker
1 Enter X’Over setting mode
Press [ ] 1 sec., and select “DSP” > “SETUP” >
“X’OVER”.
Press the [AUD] knob.
• For how to select Function Control items, refer to
<Function Control> (page 10).
2 Select the speaker you want to set
Turn the [AUD] knob and push the center.
“FRONT” (Front speaker)/ “REAR” (Rear speaker)/
“SUB-W” (Subwoofer )
position
Turn the [AUD] knob and push the center when
the desired value is displayed.
Adjust between 0 and 440 cm.
✍ Refer to <Appendix> (page 31) on how to set
the compensation value.
4 Exit DTA setting mode
Press the [
] button.
Turn the [AUD] knob and push the center.
“FRONT”/ “REAR”/ “SUB-W”
3 Select the item you want to set
Turn the [AUD] knob and push the center.
4 Set the X’Over value
Turn the [AUD] knob and push the center when
the desired value is displayed.
5 Exit X’Over setting mode
Press the [
28 |
] button twice.
KDV-U4349/ KDV-U4349M/ KDV-U4449
Audio Preset Memory
Audio Preset Recall
Registering the value setup by Sound Control.
Recalling the sound setup registered by <Audio
Preset Memory> (page 29).
1 Setup Sound Control
Refer to the following operations to setup the
Sound Control.
- Cabin selection (page 27)
- Speaker Setting (page 27)
- DTA (Digital Time Alignment) setting (page 28)
- X’Over setting (page 28)
- Preset Equalizer Select (page 25)
- Manual Equalizer Control (page 26)
- Position Control (page 26)
2 Enter Audio Preset Memory mode (Other than
Standby mode)
Press [ ] 1 sec., and select “DSP” > “PRESET” >
“MEMORY”.
Press the [AUD] knob for at least 1 second.
• For how to select Function Control items, refer to
<Function Control> (page 10).
3 Select the number to put in the memory
Turn the [AUD] knob to select number, and then
press the [AUD] knob.
“USER1” – “USER6”
4 Put the Audio Preset in the memory
Turn the [AUD] knob to select “YES”, and then
press the [AUD] knob.
“COMPLETE” is displayed.
1 Select the source
Press the [SRC] button.
2 Enter Audio Preset Recall mode
Press [ ] 1 sec., and select “DSP” > “PRESET”>
“RECALL”.
Press the [AUD] knob for at least 1 second.
• For how to select Function Control items, refer to
<Function Control> (page 10).
3 Select the number to recall in the memory
Turn the [AUD] knob to select number, and then
press the [AUD] knob.
“USER1” – “USER6”
4 Recall the Audio Preset
Turn the [AUD] knob to select “YES”, and then
press the [AUD] knob.
“COMPLETE” is displayed.
5 Exit Function Control mode
Press the [
] button for at least 1 second.
⁄
• The User memory of <Preset Equalizer Select> (page 25)
is changed to the value which was recalled.
• The source tone memory item of <Preset Equalizer
Select> (page 25) is changed to the value which was
recalled by the selected source.
5 Exit Function Control mode
Press the [
] button for at least 1 second.
⁄
• Register 6 pairs of Audio Preset Memory.
• “USER1”: When you press the Reset, all the sources will
be the setting value which is registered.
• “USER1”, “USER2”:
The memory cannot be erased by the Reset button.
• This function cannot be registered when the iPod
Equalizer set in <Equalizer Control> (page 25).
English |
29
Basic Operations of Remote Control
SRC
AUDIO
Dual Zone Control
SRC
OSD
TOP MENU
MENU
SETUP
RETURN
AUDIO
SUBTITLE
ANGLE
ZOOM
Select sub source of Dual zone system: [2 ZONE]
Rear channel volume control: [R.VOL]
AUDU
O
O
O
AUDU
ENTER
DVDU
O
/D
FM+/AM–
0—9
Band select: [FM+]/[AM–]
VOL
O
1
2ABC 3 DEF
4GHI
5JKL 6MNO
2 ZONE
VOL
2 ZONE
Station select: [4]/[¢]
R.VOL
ATT
In DVD/USB/iPod Source (DVD mode)
Recall preset stations: [1] — [6]
R.VOL
7PQRS 8TUV 9WXYZ
(page 18)
In Tuner Source (AUD mode)
DVDU
O
DIRECT
0
ATT
Refer to <Disc/ USB Operations of remote control>
(page 16).
Refer to <iPod Operations of remote control> (page
20).
Remote Controller Mode Switch
The functions operated from the remote controller
differ depending on the position of the mode switch.
AUD mode: [AUD]
Switch to this mode when controlling a selected
source or tuner source, etc.
DVD mode: [DVD]
Switch to this mode when playing DVDs or USB etc.
with the player integrated in this unit.
⁄
• Switch the mode switch to AUD or DVD position. With the
mode switch in the middle, the remote controller cannot
operate.
⁄
About [
]
This button is used when Bluetooth HANDS FREE
BOX is connected. For more information, refer to the
instruction manual of Bluetooth HANDS FREE BOX.
Loading and Replacing battery
Use two “AAA”/“R03”-size batteries.
Insert the batteries with the + and – poles aligned
properly, following the illustration inside the case.
General Control
Volume control: [VOL]
Source select: [SRC]
Volume reduce: [ATT]
When the button is pressed again, the volume returns
to the previous level.
In Audio Control (AUD mode)
Audio item select: [AUDIO]
¤CAUTION
• Do not leave the battery near fire or under direct
sunlight. A fire, explosion or excessive heat generation
may result.
• Do not set the remote control in hot places such as on
the dashboard.
Adjust the Audio item: [VOL]
⁄
• Refer to <Audio Control> (page 25) for the operation
method, such as the procedures for Audio control and
others operations.
30 |
KDV-U4349/ KDV-U4349M/ KDV-U4449
Appendix
For operating KCA-BT300 (Optional)
Function Glossary
For operation refer to Model-A in the Instruction
Manual of KCA-BT300, and the table below. The
[AUTO]/[TI] button should be replaced with [SRC]
button for <Answering the Waiting Call after
Terminating>.
Set the Type Swith on KCA-BT300 as folllows.
1: OFF, 2: OFF, 3: OFF
Set the remote controller mode switch to “AUD” mode
before starting operation.
• “AUTO1”, “AUTO2”, “MANUAL” (Tuning mode
select)
Select a tuning mode of the radio.
Notation used in the KCA-BT300
Instruction Manual
[38] button
Control knob
[AUTO]/[TI] button
Control knob towards up or down
Control knob towards left or right
• AUX
When this is set to ON, AUX source can be selected.
ON1: Allows AUX source to be selected. Use this
setting when the built-in AUX terminal is
connected to the external equipment all the
time.
ON2: Activates the attenuator function when
turning on the power with AUX source
selected. Cancel the attenuator function
by turning the volume knob clockwise
when listening to the audio of the external
equipment.
OFF: Disable AUX source selection. Use this setting
when the built-in AUX terminal is not used.
• DTA (Digital Time Alignment)
Make fine adjustment of the delay time of the
speaker output specified at <Cabin selection>
(page 27) to have a more suitable environment for
your vehicle.
The settings of the delay time are automatically
identified and compensated by specifying the
distances of each speaker from the center of the
vehicle interior.
1 Set the front and rear positions and the height
of the reference point to the position of the ears
of the person sitting in the front seat, and set
the right and left positions to the center of the
vehicle interior.
2 Measure the distances from the reference point
to the speakers.
3 Calculate the distance difference in accordance
with the farthest speaker.
Operation
[AUD] knob*1
[AUD] knob
[DISP] button
[FM+] or [AM–] button
[4] or [¢] button
*1 Use the [38] button for the operation of <Switching to the
Private Mode>.
For operating KCA-BT200 (Optional)
For operation refer to Model-A-1 in the Instruction
Manual of KCA-BT200, and the table below. The
[AUTO]/[TI] button should be replaced with [SRC]
button for <Answering the Waiting Call after
Terminating>.
Set the remote controller mode switch to “AUD” mode
before starting operation.
Notation used in the KCA-BT200
Instruction Manual
[38] button
Control knob
[AUTO]/[TI] button
Control knob towards up or down
Control knob towards left or right
Operation
[AUD] knob*1
[AUD] knob
[DISP] button
[FM+] or [AM–] button
[4] or [¢] button
*1 Use the [38] button for the operation of <Switching to the
Private Mode>.
Tuning mode
Auto seek
Preset station seek
Manual
Display
“AUTO1”
“AUTO2”
Operation
Automatic search for a station.
Search in order of the stations in the
Preset memory.
“MANUAL” Normal manual tuning control.
Next page 3
English | 31
Appendix
+100cm
50cm
80cm
150cm
+70cm
+0cm
• “HIGHWAY” (Highway sound)
Increases the volume of faintest sound being lost
by road noises to make the sound more audible.
Additionally, it accentuates bass sound being
lost by road noises to make the bass sound more
dynamic.
• “ICON”
Sets the Graphics mode of the display during
normal playback condition.
ON1: Turns on.
ON2: Displays an animation.
OFF: Turns off.
• “SWPRE” (Switching Preout)
Switches the preout between rear output (“R”),
subwoofer output (“SW”), and DVD/USB source
output (“AV”).
• “ZONE2” (Dual Zone)
Set the destination (front speaker “F” or rear speaker
“R”) of the sub source (DVD/USB/AUX) when the
Dual Zone function is turned on.
32 |
KDV-U4349/ KDV-U4349M/ KDV-U4449
Language code list
Code
ENGLISH
SPANISH
FRENCH
GERMAN
ITALIAN
DUTCH
SWEDISH
DANISH
RUSSIAN
CHINESE
PORTUGUESE
JAPANESE
AA
AB
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
BI
BN
BO
BR
CA
CO
CS
CY
DZ
EL
EO
ET
EU
FA
FI
FJ
FO
FY
GA
GD
GL
GN
GU
HA
Language
English
Spanish
French
German
Italian
Dutch
Swedish
Danish
Russian
Chinese
Portuguese
Japanese
Afar
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Bhutani
Greek
Esperanto
Estonian
Basque
Persian
Finnish
Fiji
Faroese
Frisian
Irish
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Code
HI
HR
HU
HY
IA
IE
IK
IN
IS
IW
JI
JW
KA
KK
KL
KM
KN
KO
KS
KU
KY
LA
LN
LO
LT
LV
MG
MI
MK
ML
MN
MO
MR
MS
MT
MY
NA
NE
NO
OC
OM
OR
PA
PL
PS
QU
RM
RN
Language
Hindi
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
Icelandic
Hebrew
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laotian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay
Maltese
Burmese
Nauru
Nepali
Norwegian
Occitan
(Afan) Oromo
Oriya
Punjabi
Polish
Pashto, Pushto
Quechua
Rhaeto-Romance
Kirundi
Code
RO
RW
SA
SD
SG
SH
SI
SK
SL
SM
SN
SO
SQ
SR
SS
ST
SU
SW
TA
TE
TG
TH
TI
TK
TL
TN
TO
TR
TS
TT
TW
UK
UR
UZ
VI
VO
WO
XH
YO
ZU
Language
Romanian
Kinyarwanda
Sanskrit
Sindhi
Sangho
Serbo-Croatian
Singhalese
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tongan
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Wolof
Xhosa
Yoruba
Zulu
English |
33
Accessories/ Installation Procedure
Accessories
1
4
..........1
2
..........4
5
..........2
..........4
3
..........1 (2m)
Installation Procedure
1. To prevent a short circuit, remove the key from the
ignition and disconnect the - battery.
2. Make the proper input and output wire
connections for each unit.
3. Connect the speaker wires of the wiring harness.
4. Connect the wiring harness wires in the following
order: ground, battery, ignition.
5. Connect the wiring harness connector to the unit.
6. Install the unit in your car.
7. Reconnect the - battery.
8. Press the reset button.
2WARNING
If you connect the ignition wire (red) and the battery wire
(yellow) to the car chassis (ground), you may cause a short
circuit, that in turn may start a fire. Always connect those
wires to the power source running through the fuse box.
¤
• If the power is not turned ON (“PROTECT” is displayed),
the speaker wire may have a short-circuit or touched the
chassis of the vehicle and the protection function may
have been activated. Therefore, the speaker wire should be
checked.
• If your car’s ignition does not have an ACC position, connect
the ignition wires to a power source that can be turned on
and off with the ignition key. If you connect the ignition
wire to a power source with a constant voltage supply, as
with battery wires, the battery may die.
• If the console has a lid, make sure to install the unit so that
the faceplate will not hit the lid when closing and opening.
• If the fuse blows, first make sure the wires aren’t touching
to cause a short circuit, then replace the old fuse with one
with the same rating.
• Insulate unconnected wires with vinyl tape or other similar
material. To prevent a short circuit, do not remove the caps
on the ends of the unconnected wires or the terminals.
• Connect the speaker wires correctly to the terminals to
which they correspond. The unit may be damaged or fail to
work if you share the - wires or ground them to any metal
part in the car.
• When only two speakers are being connected to the
system, connect the connectors either to both the front
output terminals or to both the rear output terminals (do
not mix front and rear). For example, if you connect the +
connector of the left speaker to a front output terminal, do
not connect the - connector to a rear output terminal.
• After the unit is installed, check whether the brake lamps,
blinkers, wipers, etc. on the car are working properly.
• Mount the unit so that the mounting angle is 30° or less.
About CD players/disc changers connected
to this unit
If the CD player/ disc changer has the “O-N” switch, set
it to the “N” position.
The functions you can use and the information that
can be displayed may differ depending on the models
being connected.
• Mounting and wiring this product requires skills and
experience. For safety’s sake, leave the mounting and wiring
work to professionals.
• Install this unit in the console of your vehicle. Do not touch
the metal part of this unit during and shortly after the use
of the unit. Metal part such as the heat sink and enclosure
become hot.
• Make sure to ground the unit to a negative 12V DC power
supply.
• Do not install the unit in a spot exposed to direct sunlight
or excessive heat or humidity. Also avoid places with too
much dust or the possibility of water splashing.
• Do not use your own screws. Use only the screws provided.
If you use the wrong screws, you could damage the unit.
34 |
KDV-U4349/ KDV-U4349M/ KDV-U4449
Connecting Wires to Terminals
AUX input (Stereo)
Use the mini-plug cable which is
stereo type and does not have any
resistance.
Light Green (Parking sensor wire)
⁄
PRK SW
Light Green
(Extension cable: Accessory3)
Yellow (Visual output)
VIDEO
OUT
USB connector
For the sake of safety, be sure to
connect the parking sensor.
Connect to the vehicle’s
parking brake detection
switch harness.
FM/AM antenna input
Front side
R
L
Rear output/ Sub Woofer output/
AV output (audio)
Fuse (10A)
Wiring harness
(Accessory1)
To Kenwood disc changer/ External optional accessory
To connect these leads, refer to the relevant instruction manuals.
⁄
White
White/Black
To front left speaker
Gray
Gray/Black
To front right speaker
Green
Green/Black
To rear left speaker
Purple
Purple/Black
To rear right speaker
If no connections are made, do not let the wire come out from the tab.
Blue/White
(Power control/ Antenna control wire)
P.CONT
Blue
(Antenna control wire)
ANT.
CONT
Brown
MUTE
Car fuse box
Red (Ignition wire)
ACC
Yellow (Battery wire)
Black (Ground wire) - (To car chassis)
Connect either to the power control terminal when using the optional
power amplifier, or to the antenna control terminal in the vehicle.
Depending on what antenna you are using, connect either to the control
terminal of the motor antenna, or to the power terminal for the booster
amplifier of the film or short pole-type antenna.
Not used.
Ignition key switch
Car fuse box
(Main fuse)
Battery
English |
35
Installation/Removing the Unit
Non-Japanese cars
Removing the hard rubber frame
1 Engage the catch pins on the removal tool and
remove the two locks on the upper level.
Upper the frame and pull it forward as shown in
the figure.
Lock
Bend the tabs of the mounting
sleeve with a screwdriver or similar
utensil and attach it in place.
⁄
Catch
Accessory2
Removal tool
• Make sure that the unit is installed securely in place. If the
unit is unstable, it may malfunction (for example, the sound
may skip).
2 When the upper level is removed, remove the
Japanese cars
1 Refer to the section <Removing the hard rubber
• The frame can be removed from the bottom side in the
same manner.
frame> and then remove the hard rubber frame.
2 Align the holes in the unit (two locations on each
side) with the vehicle mounting bracket and secure
the unit with the accessory screws.
T
frame> and then remove the hard rubber frame.
on each side, as shown.
3 Lower the removal tool toward the bottom, and
T/N
T
T: Toyota cars
N: Nissan cars
8 mm
MAX.
pull out the unit halfway while pressing towards
the inside.
Accessory2
8mm
MAX.
4
ø5mm
Removing the Unit
1 Refer to the section <Removing the hard rubber
2 Insert the two removal tools deeply into the slots
N
N
lower two locations.
⁄
5
ø5mm
Accessory4...for Nissan car
Accessory5...for Toyota car
¤
¤ CAUTION
Install this unit in the console of your vehicle.
Do not touch the metal part of this unit during and
shortly after the use of the unit. Metal part such as
the heat sink and enclosure become hot.
36 |
• Be careful to avoid injury from the catch pins on the
removal tool.
4 Pull the unit all the way out with your hands, being
careful not to drop it.
KDV-U4349/ KDV-U4349M/ KDV-U4449
Troubleshooting Guide
Some functions of this unit may be disabled by
some settings made on this unit.
!
!
• Cannot set up the subwoofer.
• Cannot set up the low pass filter.
• Cannot set up subwoofer phase.
• No output from the subwoofer.
▲ • <Subwoofer output> of <Basic Operation> (page 8)
is not set to On.
• Preout is not set to subwoofer. ☞ “MENU” > “SWPRE”
of <Function Control> (page 10)
• The Dual zone function is enabled.
☞ <Audio Setup> (page 25)
• Cannot set up the equalizer.
• Cannot set up the crossover network.
• Cannot set up Digital Time Alignment.
• Cannot select the “CONTROL” in “DSP”.
• Cannot select the “SETUP” in “DSP”.
▲ • The Dual zone function is enabled. ☞ <Audio
Setup> (page 25)
• The DSP function is disabled. ☞ “DSP” > “DSP SET” of
<Function Control> (page 11)
• In the speaker select option, None is selected for
the rear speakers. ☞ <Speaker Setting> (page 27)
!
Cannot set up the Dual zone.
▲ The AV output function is enabled.
☞ <Audio Setup> (page 25)
!
• Cannot set up the AV output.
• Cannot select the “SWPRE” in “MENU”.
▲ The Dual zone function is enabled.
☞ <Audio Setup> (page 25)
!
• Cannot register a security code.
• Cannot set up Display.
▲ <Demonstration mode Setting> (page 7) is not
turned off.
!
• Cannot switch to DVD or USB source.
▲ • The Dual zone function is set to DVD or USB.
☞ <Audio Setup> (page 25)
• AV output source is set to USB or DVD.
☞ <Audio Setup> (page 25)
What might seem to be a malfunction in your unit
may just be the result of slight misoperation or
miswiring. Before calling service, first check the
following table for possible problems.
Tuner source
?
Radio reception is poor.
✔ The car antenna is not extended.
☞ Pull the antenna out all the way.
Disc source
?
The specified disc does not play, but another one
plays instead.
✔ The specified disc is quite dirty.
☞ Clean the disc, referring to the disc cleaning of
the section on <Handling discs> (page 3).
✔ The disc is loaded in a different slot from that
specified.
☞ Eject the disc magazine and check the number
for the specified disc.
✔ The disc is severely scratched.
☞ Try another disc instead.
Audio file source
?
The sound skips when an Audio file is being
played.
✔ The media is scratched or dirty.
☞ Clean the media, referring to the disc cleaning of
the section on <Handling discs> (page 3).
✔ The recording condition is bad.
☞ Record the media again or use another media.
English |
37
Troubleshooting Guide
The messages shown below display your
systems condition.
NA DVICE:
• An unsupported USB device is connected.
• Connection to the iPod has failed.
➪ Check that the connected iPod is an iPod
that is supported. See <About Audio file>
(page 4) for information on supported
iPods.
TOC ERR:
• The disc is quite dirty. The disc is upsidedown. The disc is scratched a lot.
• No disc has been loaded in the disc
magazine.
E-05:
The disc is unreadable.
E-77:
The unit is malfunctioning for some reason.
➪ Press the reset button on the unit. If the
“E-77” code does not disappear, consult
your nearest service center.
USB ERR:
E-99:
Something is wrong with the disc magazine.
Or the unit is malfunctioning for some reason.
➪ Check the disc magazine. And then press
the reset button on the unit. If the “E-99”
code does not disappear, consult your
nearest service center.
Some trouble may have occurred to the
connected USB device.
➪ Remove the USB device, turn off the unit,
wait for about 10 seconds, and then turn
on the unit again. If the same display is
repeated, use another USB device.
iPod ERR:
MEC ERR:
The unit is malfunctioning for some reason.
➪ Press the [0] button on the unit. If the
error message does not disappear when
you eject the disc and insert it again,
consult your nearest service center.
Connection to the iPod has failed.
➪ Remove the USB device and then
reconnect it.
➪ Confirm that the software for the iPod is
the latest version.
REG ERR:
IN (Blink):
The DVD player section is not operating
properly.
➪ Reinsert the disc. If the disc cannot be
ejected or the display continues to flash
even when the disc has been properly
reinserted, please switch off the power
and consult your nearest service center.
The disc you wanted to play has a region
code that cannot be played with this unit.
PARK OFF:
Source for displaying video is selected while
car is traveling.
➪ Video will be displayed when the car is
stopped and the parking brake has been
engaged.
➪ Press the [DISP] button for at least 1
second. The display of this unit can be
temporarily hidden.
READING:
The unit is reading the data on the media.
PROTECT (Blink):
The speaker wire has a short-circuit or
touches the chassis of the vehicle, and then
the protection function is activated.
➪ Wire or insulate the speaker cable
properly and press the reset button. If
the “PROTECT” code does not disappear,
consult your nearest service center.
NA FILE:
An Audio file is played with a format that this
unit can’t support.
COPY PRO:
A copy-protected file is played.
READ ERR:
The file system of the connected USB device
is broken.
➪ Copy the files and folders for the USB
device again. If the error message is still
displayed, initialize the USB device or use
other USB devices.
NO DVICE:
The USB device is selected as a source
although no USB device is connected.
➪ Change the source to any source other
than USB. Connect an USB device, and
change the source to USB again.
38 |
NO MUSIC/E-15:
• The connected USB device contains no
playable audio file.
• Media was played that does not have data
recorded that the unit can play.
KDV-U4349/ KDV-U4349M/ KDV-U4449
Specifications
FM tuner section
Frequency Range
200 kHz space : 87.9 MHz – 107.9 MHz
50 kHz space : 87.5 MHz – 108.0 MHz
Usable Sensitivity (S/N = 30dB)
: 9.3dBf (0.8 μV/75 Ω)
Quieting Sensitivity (S/N = 50dB)
: 15.2dBf (1.6 μV/75 Ω)
Frequency Response (±3 dB)
: 30 Hz – 15 kHz
Signal to Noise Ratio (MONO)
: 70 dB
Selectivity (±400 kHz)
: ≥ 80 dB
Stereo Separation (1 kHz)
: 40 dB
AM tuner section
Frequency Range
10 kHz space : 530 kHz – 1700 kHz
9 kHz space : 531 kHz – 1611 kHz
Usable Sensitivity (S/N = 20dB)
: 28 dBμ (25 μV)
DVD player section
D/A Converter
: 24 Bit
Audio Decoder
: Linear PCM/ Dolby digital/ MP3/ WMA/ WAV
Video Decoder
: MPEG1/ MPEG2/ DivX
Wow & Flutter
: Below Measurable Limit
Frequency Response
Sampling frequency; 96 kHz : 16 – 22,000 Hz
Sampling frequency; 48 kHz : 16 – 22,000 Hz
Sampling frequency; 44.1 kHz : 16 – 20,000 Hz
Signal to Noise Ratio (1 kHz)
: 95 dB
Dynamic Range
Sampling frequency; 96 kHz : 100 dB
Sampling frequency; 48/ 44.1 kHz : 90 dB
Disc Format
: DVD-Video/ VIDEO-CD/ CD-DA
Sampling Frequency
: 44.1/ 48/ 96 kHz
Quantifying Bit Number
: 16/ 20/ 24 bit
USB Interface
USB Standard
: USB1.1/ 2.0
Data Transfer Rate
Full Speed : Maximum 12 Mbps
Low Speed : Maximum 1.5 Mbps
Compatible Device
: Mass storage class
Maximum Supply Current
: 500 mA
File System
: FAT 32/ 16/ 12
Playable Video/ Audio Format
: MPEG1/ MPEG2/ DivX/ MP3/ WMA/ WAV
Video Section
Video Output Level
: 1 Vp-p (75 Ω)
Color System
: NTSC/ PAL
Audio Section
Maximum Output Power
: 50 W x 4
Full Bandwidth Power (at less than 1% THD)
: 22 W x 4
Speaker Impedance
:4–8Ω
Tone Action
Frequency (BAND1 – 5): 60/ 250/ 1k/ 4k/ 16k Hz
Gain : ±9 dB
Preout Level / Load (DVD/CD)
: 2500 mV/10 kΩ
Preout Impedance
: ≤ 600 Ω
Auxiliary Input
Frequency Response
: 20 Hz – 20 KHz (±3dB)
Input Maximum Voltage
: 1200 mV
Input Impedance
: 10 kΩ
General
Operating Voltage (10.5 – 16V allowable)
: 14.4 V
Maximum Current consumption
: 10 A
Installation Size (W x H x D)
: 182 x 53 x 156 mm
Weight
: 1.3 kg
Specifications subject to change without notice.
English |
39
For Turkey
Bu ürün 26891sayılı Resmi Gazete’de yayımlanan
Elektrikli ve Elektronik Eşyalarda Bazı Zararlı Maddelerin
Kullanımının Sınırlandırılmasına Dair Yönetmeliğe
uygun olarak üretilmiştir.
This product complies with Directive, Number 26891
regarding “REGULATION ON THE RESTRICTION OF
THE USE OF CERTAIN HAZARDOUS SUBSTANCES IN
ELECTRICAL AND ELECTRONIC EQUIPMENT”.
The marking of products using lasers
CLASS 1
LASER PRODUCT
The label is attached to the chassis/case and says
that the component uses laser beams that have been
classified as Class 1. It means that the unit is utilizing
laser beams that are of a weaker class. There is no
danger of hazardous radiation outside the unit.
KDV-U4349M:
Declaration of Conformity with regard to
the EMC Directive 2004/108/EC
Manufacturer:
Kenwood Corporation
2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan
EU Representative’s:
Kenwood Electronics Europe BV
Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands
is a trademark of DVD Format/Logo Licensing Corporation registered in the U.S., Japan and other countries.
• “Made for iPod,” and “Made for iPhone” mean that an electronic accessory has been designed to connect
specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple
performance standards. Apple is not responsible for the operation of this device or its compliance with safety
and regulatory standards. Please note that the use of this accessory with iPod, or iPhone may affect wireless
performance.
• iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and
other countries.
ABOUT DIVX VIDEO:
DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified® device that plays DivX
video. Visit divx.com for more information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND:
This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD)
movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete your registration.
DivX®, DivX Certified® and associated logos are trademarks of DivX, Inc. and are used under license.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
This product incorporates copyright protection technology that is protected by U.S. patents and other
intellectual property rights of Rovi Corporation. Reverse engineering or disassembly is prohibited.
Download PDF

advertising