Cisco Systems 6400 Network Card User Manual

A P P E N D I X
A
Attribute Reference
This section references all objects and their attributes that are used by the Cisco 6400 Equipment
Module.
The attribute tables in this section follow a convention that will help you easily identify important
information such as derived values and mandatory attributes.
Table A-1
Cisco 6400 Equipment Module Attribute Reference Tables
Element Type
Element Name
Table
Fabric Elements
Network
Table A-3
Radius Server
Table A-4
Node
Table A-5
Physical Port
Table A-6
Logical Port
Table A-7
Cross Connection
Table A-8
NRP Internal PVC
Table A-9
Singlehop Tunnel
Table A-10
Multihop Tunnel
Table A-11
Aggregation Key
Table A-12
SHTunnel Destination
Table A-13
MHTunnel Destination
Table A-14
Service List
Table A-15
IOSQOS
Table A-16
VC CLass
Table A-17
Virtual Template
Table A-18
Access Control List
Table A-19
Service Elements
Access Control Element Table A-20
Route Entry
Table A-21
Authenticator
Table A-22
Physical Port Profile
Table A-23
Logical Port Profile
Table A-24
Cisco 6400 Equipment Module Configuration Guide
OL-1812-01
A-1
Appendix A
Attribute Reference
Table Conventions
Cisco 6400 Equipment Module Attribute Reference Tables (continued)
Element Type
Element Name
Table
Service Elements
Cross-connection
Profile
Table A-25
NRP Internal PVC
Profile
Table A-26
Table Conventions
The following codes describe attribute behaviour. They appear on a separate line in the attribute column
for each attribute.
Table A-2
Attribute Reference Table Conventions
Code
Description
M
Attribute is Mandatory.
R|W|C
R—Attribute is read-only.
W—Attribute is writable.
C—Attribute is writable upon creation, and read-only thereafter.
A | RDP
A—Attribute is autogenerated.
RDP—Reverse Data Path. Attribute value is retrieved from the
element or network management system after you create the
corresponding object.
P
Note
Attribute can be profiled.
Some attributes contain restrictions or dependencies that are out of the scope of the above table
conventions. In this case, the restriction or dependency will be included with the attribute description
in the table or in a footnote.
Network
Object Name: C4ntNetwork
OAF: C4ntNetwork.oaf
Cisco 6400 Equipment Module Configuration Guide
A-2
OL-1812-01
Appendix A
Attribute Reference
Network
Table A-3
Network
Attributes
Acceptable
Values
Name [srname]
Text (64)
Default Values
This is the network name. This name must be unique across all networks.
M, C
Customer [vpn]
Text (16)
This is the customer name. This attribute is optional.
W
Domain [domain]
Text (16)
This is the domain name. This attribute is optional.
W
Common Parameters
Containing Network [srsubnet.srname]
Text (32)
This is the name of the network of which this network object is a subnet.
M, C
Transit Cost [srcost]
This is the cost of crossing the sub-network. This attribute is used by the
Threader to determine the lowest cost path when threading a service.
Numb (10)
Range=0-214748
3647
50
Text (4)
"C4nt"
Bool (5)
False
Bool (5)
False
M
Class [srclass]
The CPC class name for the network object.
R
Opaque [sropaque]
The threading strategy (opaque or transparent). This value should be set to
"False" to disable path threading.
W
Use Backup EMS [srusebackupems]
Specify whether or not to use a backup EMS. Disabled to use the primary
EMS. Enabled to use the backup EMS.
W
Cisco 6400 Equipment Module Configuration Guide
OL-1812-01
A-3
Appendix A
Attribute Reference
RADIUS Server
Table A-3
Network (continued)
Attributes
Acceptable
Values
Resource Map [srrmmap]
Numb (10)
Range=0-214748
This attribute is an integer used to carry a bit map of services supported by
3647
this Network.
Default Values
48
W
Pre-provisioned [srpreprov]
Enum (4) "Full"
"Init"
"None"
Indicates if the object is pre-provisioned or not. The default value is None,
indicating that the network object is not pre-provisioned. If Full or Init is
selected, existing Service Elements (SEs) can be used by new Service
Objects. The Threader will assign the proper SE that matches the Service
Object criteria. In Init mode, if a suitable existing SE is not found, the
Threader will attempt to create one for the Service Object. In Full mode, if
a suitable existing SE is not founds, the Threader will not create one and
report an error. This attribute is effective only when Opaque attribute
(above) is TRUE.
None
R
RADIUS Server
Object Name: C4rdRadius
OAF: C4rdRadius.oaf
Table A-4
RADIUS Server
Attributes
Acceptable
Values
Name [srname]
Default Values
Text (64)
This is the network name. After the network is saved and committed to the
database, this field will be read-only.
M|C
Customer [vpn]
Text (16)
This is the customer name.
W
Domain [domain]
Text (16)
This is the domain name.
W
Class [srclass]
Text (4)
"C4rd"
This is the class name of the RADIUS server object.
R
Cisco 6400 Equipment Module Configuration Guide
A-4
OL-1812-01
Appendix A
Attribute Reference
RADIUS Server
Table A-4
RADIUS Server (continued)
Attributes
Acceptable
Values
Default Values
RADIUS
Radius Version [c4_rad_ver]
This is the RADIUS version. Cisco Provisioning Center supports Merit
RADIUS version 3.6B.
R
Enum (14)
"none"
"Merit_AAA_3.6
B"
Primary RADIUS
Radius User Name [c4_rad_user1]
Text (32)
Specify a valid user name for the RADIUS server.
M|W
Radius Password [c4_rad_passwd1]
Text (32)
Specify a valid password for the user name that you have entered for the
RADIUS server.
M|W
Primary Radius Server [c4_rad_name1]
Text (32)
This is the name of the primary RADIUS server. You can use the hostname
or the IP address of the RADIUS server.
M|W
Primary Radius Auth Port [c4_rad_authport1]
This is the authentication port on the primary RADIUS server.
M|W
Primary Radius Acct Port [c4_rad_actport1]
This is the accounting port on the Primary RADIUS server.
M|W
Primary Radius IP Address [c4_rad_ip1]
Numb (10)
Range=0-214748
3647
1645
Numb (10)
Range=0-214748
3647
1646
Text (15)
This is the IP address of the primary RADIUS server. This address must be
specified in dotted decimal notation.
M|R
Backup RADIUS
Backup Radius User Name [c4_rad_user2]
Text (32)
Specify a valid user name for the backup RADIUS server.
W
Backup Radius Password [c4_rad_passwd2]
Text (32)
Specify a valid password for the user name that you have entered for the
backup RADIUS server.
W
Cisco 6400 Equipment Module Configuration Guide
OL-1812-01
A-5
Appendix A
Attribute Reference
RADIUS Server
Table A-4
RADIUS Server (continued)
Attributes
Acceptable
Values
Backup Radius Server [c4_rad_name2]
Default Values
Text (32)
This is the name of the backup RADIUS server. You can use the hostname
or the IP address of the RADIUS server.
W
Backup Radius Auth Port [c4_rad_authport2]
This is the authentication port on the backup RADIUS server.
W
Backup Radius Acct Port [c4_rad_actport2]
This is the accounting port on the backup RADIUS server.
W
Backup Radius IP Address [c4_rad_ip2]
Numb (10)
Range=0-214748
3647
1645
Numb (10)
Range=0-214748
3647
1646
Text (15)
This is the IP address of the secondary RADIUS server. This address must
be specified in dotted decimal notation.
R
LDAP
LDAP Server [c4_ldap_name]
Text (32)
This attribute is not supported in this release.
W
LDAP User [c4_ldap_user]
Text (32)
This attribute is not supported in this release.
W
LDAP Passwd [c4_ldap_passwd]
Text (32)
This attribute is not supported in this release.
W
LDAP IP Address [c4_ldap_ip]
Text (15)
This attribute is not supported in this release.
W
LDAP Port [c4_ldap_port]
This attribute is not supported in this release.
W
LDAP Version [c4_ldap_ver]
Numb (10)
Range=0-214748
3647
0
Text (32)
This attribute is not supported in this release.
R
Cisco 6400 Equipment Module Configuration Guide
A-6
OL-1812-01
Appendix A
Attribute Reference
Node
Node
Object Name: C4ndNode
OAF: C4ndNode.oaf
Table A-5
Node
Attributes
Acceptable
Values
Default Values
Common Attributes
Name [srname]
Text (64)
This is the node name. After the node is saved and committed to the
database, this field will be read-only.
M|C
Customer [vpn]
Text (16)
This is the customer name. This attribute is optional.
W
Domain [domain]
Text (16)
This is the domain name. This attribute is optional.
W
Containing Network [srnetwork.srname]
Text (32)
This is the name of the containing network.
R|A
Management Address [srmgmtaddress]
Text (32)
This is the management address. This value is the same as the NSP IP
address.
M|C
Transit Cost [srcost]
This is the cost of transiting the network. This attribute is used by the
threader to decide on an optimum route for the service. This is typically
assigned the value of 100.
Numb (10)
Range=0-214748
3647
100
Text (24)
"C6400UAC"
Text (4)
"C4nd"
W
Node Type [srtype]
The node type.
R|A
Class [srclass]
The node object class name.
R|A
Cisco 6400 Equipment Module Configuration Guide
OL-1812-01
A-7
Appendix A
Attribute Reference
Node
Table A-5
Node (continued)
Attributes
Acceptable
Values
Containing Region [srarea]
Text (32)
Default Values
The name of the administrative area containing the router (a LATA, for
example). This attribute is optional.
W
Geographical Location [srgeogloc]
Text (32)
This is the geographical location of the router (for example, a GPS
reference). This attribute is optional.
W
Organizational Location [srorgloc]
Text (64)
This is the organizational location of the router (for example, an X.500
directory reference). This attribute is optional.
W
Pre-provisioned [srpreprov]
Enum (4) "Full"
"Init"
"None"
Indicates if the object is pre-provisioned or not. The default value is None,
indicating that the node object is not pre-provisioned. If Full or Init is
selected, existing Service Elements (SEs) can be used by new Service
Objects. The Threader will assign the proper SE that matches the Service
Object criteria. In Init mode, if a suitable existing SE is not found, the
Threader will attempt to create one for the Service Object. In Full mode, if
a suitable existing SE is not founds, the Threader will not create one and
report an error. This attribute is effective only when Opaque attribute
(above) is TRUE.
None
M|C
Upload State [srustate]
Indicates the upload status.
W
Upload State Modification Time [srustime]
Enum (13)
Required,
Not_Required,
Indeterminate
Text (24)
Indicates the date and time that the upload state was last modified.
R
Last Successful Upload Time [srutime]
Text (24)
Indicates the date and time of the last upload from this node.
R
Last Upload Type [srutype]
Text (16)
Indicates the type of the last upload from this node.
R
NSP Specific Information
Cisco 6400 Equipment Module Configuration Guide
A-8
OL-1812-01
Appendix A
Attribute Reference
Physical Port
Table A-5
Node (continued)
Attributes
Acceptable
Values
Access User Name [c4_accname]
Text (32)
Default Values
This is the same value as the NSP Management Access username
configured on the NSP.
M|C
Access Password [c4_accpasswd]
Text (32)
This is the same value as the NSP Management Access password
configured on the NSP.
M|C
Enable Password [c4_enablepasswd]
Text (32)
This is the enable password for the NSP.
M|C
IOS Version [c4_iosversion]
Text (16)
This is the IOS version. The value is fulfilled by performing a node upload.
R
Host Name [c4_hostname]
Text (32)
This is the same value as the NSP hostname. This attribute is mandatory.
R
Redundant [c4_redundant]
Bool (5)
This value specifies whether there is an NSP counterpart available for
redundancy.
R
Maximum Cross-connections [c4_maxpvcs]
This value represents the maximum internal/external PVCs.
R
SNMP Community [c4_snmp_commun]
Numb (10)
Range=0-214748
3647
32000
Text (32)
"PUBLIC"
Numb (10)
Range=0-214748
3647
161
The SNMP community.
W
SNMP Port [c4_snmp_port]
The SNMP port.
W
Physical Port
Object Name: C4alACLProf
OAF: C4alACLProf.oaf
Cisco 6400 Equipment Module Configuration Guide
OL-1812-01
A-9
Appendix A
Attribute Reference
Physical Port
Table A-6
Physical Port
Attributes
Acceptable Values
Default Values
Common Attributes
Name [srname]
Text (24)
This is the physical port name.
M|C
Customer [vpn]
Text (16)
This is the customer name.
W
Domain [domain]
Text (16)
This is the domain name.
W
Port Type [srporttype]
Indicates the type of port.
R
Port Number [srportnumber]
Enum (5) DS3, OC3,
OC12, CPU, NRP,
NRP2, Other
Numb
Indicates the number of the port on the card.
R
Shelf Slot Number [srslotnumber]
Text (16)
Indicates the slot number being used.
R
Provisionable Bandwidth (kbits/s) [srbandwidth]
Indicates the total bandwidth of the port, in kbits/s.
R
Max PDU Size (bytes) [srmaxpdusize]
Indicates the maximum PDU size, in bytes.
R
Subscriber ID [srsubscriberid]
Numb (10)
0
Range=0-214748364
7
Numb (10)
53
Range=0-214748364
7
Text (32)
The mapping to the DSL circuit ID on the DSLAM.
W
Class [srclass]
Text (4)
C4pp
The CPC class for this physical port profile object.
R
Maximum Channels [srmazchans]
This attribute is not used with this release.
Numb (10)
0
Range=0-214748364
7
Cisco 6400 Equipment Module Configuration Guide
A-10
OL-1812-01
Appendix A
Attribute Reference
Physical Port
Table A-6
Physical Port (continued)
Attributes
Acceptable Values
Default Values
EMS Name [sremsname]
The name of the physical port used in the Element Management
System.
R
Administrative State [sradminstatus]
Indicates the administrative state of the physical port profile.
Enum (8) Locked,
Unlocked
R
Resource Model Specific Map [srrmmap]
Resource model specific map.
R
First Channel on this Pport [srstartchan]
The channel number of the first channel on this port.
W
Reserved Channels [srrezchanmap]
Numb (10)
0
Range=0-214748364
7
Numb (10)
1
Range=0-214748364
7
Text (38)
This attribute is not used.
User Label [sruserlabel]
Text (64)
Use this field to add user information.
W
Contained By
Network [srnetwork.srname]
Text (32)
The network containing the physical port.
R
Node [srnode.srname]
Text (32)
The node containing the physical port.
R
MPTP LInk
This attribute is not used.
Relationship Attributes
Lower Layer PPort [srport.srname]
Text (32)
The lower layer port supporting this physical port.
R
Peer Physical Port [srpeer]
Text (32)
The peer physical port for for this port connected by a Plink.
R
Card [srcard.srname]
Text (32)
The card containing the physical port.
W
Cisco 6400 Equipment Module Configuration Guide
OL-1812-01
A-11
Appendix A
Attribute Reference
Logical Port
Table A-6
Physical Port (continued)
Attributes
Acceptable Values
Default Values
6400 Physical Port Parameters
Access Name [c4_accname]
Text (32)
The IOS account name for the NRP/NRP2 associated with this port.
W
Access Password [c4_accpasswd]
Text (32)
The IOS account password for the NRP/NRP2 associated with this
port.
W
Enable Password [c4_enablepasswd]
Text (32)
The IOS enable password for the NRP/NRP2 associated with this
port.
W
NRP IP Address [srmgmtaddress]
Text (15)
The IP address of the NRP/NRP2 associated with this port.
W
Redundant [c4_redundant]
Bool (5)
FALSE
Indicates if the port has a counterpart for redundancy. NRP2 does not
support redundancy.
M|R
Logical Port
Object Name: C4alACLProf
OAF: C4alACLProf.oaf
Table A-7
Logical Port
Attributes
Acceptable
Values
Name [srname]
Text (24)
Default Values
This is the logical port name.
M|C
Customer [vpn]
Text (16)
This is the customer name.
W
Cisco 6400 Equipment Module Configuration Guide
A-12
OL-1812-01
Appendix A
Attribute Reference
Logical Port
Table A-7
Logical Port (continued)
Attributes
Acceptable
Values
Domain [domain]
Text (16)
Default Values
This is the domain name.
W
Protocol [srprotocol]
Text (10)
"ATM"
Specify the protocol.
M
Signalling Role [srsignallingrole]
Enum (3) "DTE"
"DCE"
A DCE logical port represents the "network side" equipment. This logical
port type supports all types of PVCs. A DTE is almost identical to the DCE
logical port except for SVC applications. It assumes the role of the "user
side" of the UNI signalling interface.
W
NNI Enable [srnnienabled]
Bool (5)
You can enable or disable NNI for the logical port.
W
Admin Status [sradminstatus]
Enum (12)
"Locked"
"Unlocked"
"ShuttingDown"
Specify the administrative status for the logical port.
W
Maximum Connections [srconnections]
Specify the maximum number of connections for the logical port. For
internal ports it is 2048.
Numb (10)
Range=0-214748
3647
0
Text (4)
"C4lp"
W
Class [srclass]
The CPC class for this logical port object.
R|A
Resource Map [srrmmap]
Numb (10)
48
Range=0-214774
This attribute is an integer used to carry a bit map of services supported by
83647
this Network.
W
QOS [srqos]
Text (32)
Specify the Quality of Service.
W
Group [srgroup]
Text (32)
Specifies the logical group membership. Allows several logical ports to be
put in a common group as a pooled resource.
W
Cisco 6400 Equipment Module Configuration Guide
OL-1812-01
A-13
Appendix A
Attribute Reference
Logical Port
Table A-7
Logical Port (continued)
Attributes
Acceptable
Values
Default Values
Priority [srpriority]
Numb (10)
Range=0-214748
3647
0
The logical port usage priority.
W
Multiple Service Ranges [srmultirange]
Bool (5)
Indicates if the logical port has multiple service ranges.
W
Multiple Fabric Ranges [sremultirange]
Bool (5)
Indicates if the logical port has multiple fabric ranges.
W
Multiple Reserved Ranges [srmultiresrange]
Bool (5)
Indicates if the logical port has multiple reserved ranges.
W
User Label [sruserlabel]
Text (64)
’" "
Text (32)
DDDDDDDDDD
DDDDDDDDDD
DDDDDDDDDD
DD
Use this field to add user information.
W
Service Map [srservmap]
Map of supported service types.
W
Contained By
Network [srnetwork.srname]
Text (32)
The network containing the logical port.
R
Node [srnode.srname]
Text (32)
The node containing the logical port.
R
Backup Lport [srbackupport.srname]
Text (32)
This attribute is not used.
R
Physical Port [srport.srportnumber]
Text (32)
The associated physical port.
R
Slot Number [srport.srslotnumber]
Text (32)
The slot number on the physical port.
R
Cisco 6400 Equipment Module Configuration Guide
A-14
OL-1812-01
Appendix A
Attribute Reference
Logical Port
Table A-7
Logical Port (continued)
Attributes
Acceptable
Values
EMS Name [sremsname]
Text (65)
Default Values
The name of the logical port used in the Element Management System.
R
Bandwidth
Incoming
Maximum (kbits/s) [sraz_bandwidth]
Numb (10)
Range=0-214748
3647
The maximum incoming bandwidth for the logical port.
W
Nominal Threshold (%) [sraz_cbnt]
Numb (10)
Range=0-214748
Specify the incoming committed bandwidth nominal threshold percentage.
3647
W
Provisionable (kbits/s) [sraz_cbw]
Numb (10)
Range=0-214748
3647
The incoming committed bandwidth is auto-calculated based on the
nominal threshold and bandwidth.
100
0
W
Outgoing
Maximum (kbits/s) [srza_bandwidth]
Numb (10)
Range=0-214748
3647
The maximum outgoing bandwidth for the logical port.
W
Nominal Threshold (%) [srza_cbnt]
Specify the outgoing committed bandwidth nominal threshold percentage
W
Provisionable (kbits/s) [srza_cbw]
The outgoing committed bandwidth is auto-calculated based on the
nominal threshold and bandwidth
Numb (10)
Range=0-214748
3647
100
Numb (10)
Range=0-214748
3647
0
W
Cisco 6400 Equipment Module Configuration Guide
OL-1812-01
A-15
Appendix A
Attribute Reference
Cross Connection
Table A-7
Logical Port (continued)
Attributes
Acceptable
Values
Default Values
6400 NRP Specific
Routing [c4_routing]
Bool (5)
Specify whether to enable or disable routing.
W
Tunneling [c4_tunneling]
Bool (5)
Specify whether to enable or disable tunneling.
W
Multihopping [c4_multihop]
Bool (5)
Specify whether to enable or disable multihopping.
W
Host Name [c4_hostname]
Text (32)
The host name of the NRP/NR2 associated with this logical port.
M|R
IOS Version [c4_iosversion]
Text (32)
Specifies the IOS version being used.
R
Maximum Internal Connections [c4_maxintpvcs]
Numb (10)
Range=0-214748
Specifies the maximum number of internal connections for the logical port.
3647
M
Primary Radius Server [c4_rad_name1]
2048
Text (32)
Specifies the primary RADIUS server.
W
Backup Radius Server [c4_rad_name2]
Text (32)
Specifies the backup RADIUS server
W
Cross Connection
Object Name: C4vcPvcx
OAF: C4vcPvcx.oaf
Cisco 6400 Equipment Module Configuration Guide
A-16
OL-1812-01
Appendix A
Attribute Reference
Cross Connection
Table A-8
Cross Connection
Attributes
Acceptable
Values
Default Values
Common Attributes
Name [srname]
Text (64)
Specify a name for the cross-connection.
M|C
Customer [vpn]
Text (16)
This is the customer. This attribute is optional.
W
Domain [domain]
Text (16)
This is the domain. This attribute is optional.
W
Profile [srprofile.sy_profname]
Text (32)
Select a profile for the cross connection on the NSP. This attribute is
optional.
W
Common Attributes
Network [srnetwork.srname]
Text (32)
This is the network that contains the 6400 UAC chassis that contains the
NSP.
R|A
Node [srnode.srname]
Text (32)
This is the node containing the PVC.
R
Recovery Priority [srpriority]
This is the recovery priority for NNI resiliency.
W
UNI Recovery Priority [srunipriority]
This is the recovery priority for UNI resiliency.
W
Provider Service [srdestserv]
The lower the
value, the higher
the priority; 0
having infinitely
low priority, and
1 having the
highest priority.
0
The lower the
value, the higher
the priority; 0
having infinitely
low priority, and
1 having the
highest priority.
0
Text (32)
This is the provider service associated with this cross connection.
Cisco 6400 Equipment Module Configuration Guide
OL-1812-01
A-17
Appendix A
Attribute Reference
Cross Connection
Table A-8
Cross Connection (continued)
Attributes
Acceptable
Values
Default Values
Transit Cost [srcost]
Numb (10)
Range=0-214748
3647
0
This is the cost of crossing the sub-network. This attribute is used by the
Threader to determine the lowest cost path when threading a service.
M
ATM LPort Associations
A Endpoint
LPort [sra_tp.srname]
Text (32)
This is the logical port designated as the A endpoint of the
cross-connection.
R|A
VPI [raa_vpi]
This is the VPI for the A endpoint. If you want to let Cisco Provisioning
Center auto-select the VPI, enter -1.
Numb (3)
Range=-3-255
-1
Numb (5)
Range=-3-16383
-1
M|C
VCI [raa_vci]
This is the VCI for the A endpoint. If you want to let Cisco Provisioning
Center auto-select the VPI, enter 0.
M|C
Enable Frame Discard [raa_frdisc]
Bool (5)
This attribute specifies whether to enable frame discard.
W
Z Endpoint
LPort [srz_tp.srname]
Text (32)
This is the logical port designated as the Z endpoint. of the
cross-connection.
R|A
VPI [raz_vpi]
This is the VPI for the Z endpoint. If you want to let Cisco Provisioning
Center auto-select the VPI, enter -1. This attribute is mandatory.
Numb (3)
Range=-1-255
-1
Numb (5)
Range=-1-16383
-1
M|C
VCI [raz_vci]
This is the VCI for the Z endpoint. If you want to let Cisco Provisioning
Center auto-select the VPI, enter 0. This attribute is mandatory.
M|C
Enable Frame Discard [raz_frdisc]
Bool (5)
This attribute specifies whether to enable frame discard.
W
ATM Attributes
Cisco 6400 Equipment Module Configuration Guide
A-18
OL-1812-01
Appendix A
Attribute Reference
Cross Connection
Table A-8
Cross Connection (continued)
Attributes
Acceptable
Values
Default Values
Circuit Type [ratype]
Enum (2) "VC"
"VP"
Specify the circuit type. It can be either a virtual circuit (VP) or virtual path
(VP).
C|P
Class of Service [raqos]
You can specify the class of service for ATM traffic. The class of service
determines which traffic descriptor you can select.
M|W|P
Fixed Round-Trip Time [ra_frtt]
Enum (7) "CBR"
"ABR" "UBR"
"rt_VBR"
"nrt_VBR"
Numb (8)
Range=0-167000
00
0
Numb (10)
Range=0-214748
This is the bandwidth consumed by the A endpoint in the A to Z direction.
3647
M|W|P
0
This attribute specifies the round-trip time in milliseconds.
W
A to Z Direction
Bandwidth (kbits/s) [sraz_bandwidth]
Primary logical port [sra_primtp]
Text (44)
This is the logical port used as the primary A side termination point when
this NC is using a backup UNI logical port.
R|A
Sustainable Cell Rate (cells/s) [raaz_scr]
SCR is the maximum average cell transmission rate that is allowed over a
given period of time on a given circuit. It allows the network to allocate
sufficient resources for guaranteeing the network performance objectives
are met.
Numb (10)
0
Range=0-214748
3647
W|P
Peak Cell Rate (cells/s) [raaz_pcr]
Numb (10)
Range=0-214748
PCR is the maximum allowed cell transmission rate. It defines the shortest
time period between cells and provides the highest guarantee that network 3647
performance objectives (based on cell loss ratio) will be met.
0
W|P
Minimum Cell Rate (cells/s) [raaz_mcr]
Numb (10)
Range=0-214748
MCR is the minimum cell rate, which is the minimum allocated bandwidth
3647
for a connection.
0
W|P
Cisco 6400 Equipment Module Configuration Guide
OL-1812-01
A-19
Appendix A
Attribute Reference
Cross Connection
Table A-8
Cross Connection (continued)
Attributes
Acceptable
Values
Maximum Burst Size (cells) [raaz_mbs]
Numb (10)
Range=0-214748
MBS is the maximum number of cells that can be received at the PCR. This
allows a burst of cells to arrive at a rate higher than the SCR. If the burst is 3647
larger than anticipated, the additional cells are either tagged or dropped.
This parameter applies only to VBR traffic.
Default Values
0
W|P
CDVT (microseconds) [raaz_cdvt]
Cell Delay Variation Tolerance establishes the time scale over which the
PCR is policed. This is set to allow for jitter (CDV).
Numb (10)
Range=0-214748
3647
0
W|P
Traffic Desc [raaz_tdtype]
This is the traffic descriptor type which describes the specified traffic
parameters for the service (for more information consult the ATM Service
Application Solutions Guide).
M|W|P
Enum (7) "None"
"ABR_FC"
"ABR_NFC"
"CBR.1"
"UBR.1"
"UBR.2"
"VBR.1"
"VBR.2"
"VBR.3" "Other"
Z to A Direction
Bandwidth (kbits/s) [srza_bandwidth]
Numb (10)
Range=0-214748
This is the bandwidth consumed by the A endpoint in the Z to A direction.
3647
M|W
Primary logical port [srz_primtp]
Text (44)
This is the logical port used as the primary Z side termination point when
this NC is using a backup UNI logical port.
R|A
Sustainable Cell Rate (cells/s) [raza_scr]
SCR is the maximum average cell transmission rate that is allowed over a
given period of time on a given circuit. It allows the network to allocate
sufficient resources for guaranteeing the network performance objectives
are met.
Numb (10)
0
Range=0-214748
3647
W|P
Peak Cell Rate (cells/s) [raza_pcr]
Numb (10)
PCR is the maximum allowed cell transmission rate. It defines the shortest Range=0-214748
time period between cells and provides the highest guarantee that network 3647
performance objectives (based on cell loss ratio) will be met.
0
W|P
Cisco 6400 Equipment Module Configuration Guide
A-20
OL-1812-01
Appendix A
Attribute Reference
Cross Connection
Table A-8
Cross Connection (continued)
Attributes
Acceptable
Values
Default Values
Minimum Cell Rate (cells/s) [raza_mcr]
Numb (10)
0
Range=0-214748
MCR is the minimum cell rate, which is the minimum allocated bandwidth
3647
for a connection.
W|P
Maximum Burst Size (cells) [raza_mbs]
Numb (10)
MBS is the maximum number of cells that can be received at the PCR. This Range=0-214748
allows a burst of cells to arrive at a rate higher than the SCR. If the burst is 3647
larger than anticipated, the additional cells are either tagged or dropped.
This parameter applies only to VBR traffic.
0
W|P
CDVT (microseconds) [raza_cdvt]
Cell Delay Variation Tolerance establishes the time scale over which the
PCR is policed. This is set to allow for jitter (CDV).
Numb (10)
Range=0-214748
3647
0
W|P
Traffic Desc [raza_tdtype]
This is the traffic descriptor type which describes the specified traffic
parameters for the service (for more information consult the ATM Service
Application Solutions Guide).
M|W|P
Enum (7) "None"
"ABR_FC"
"ABR_NFC"
"CBR.1"
"UBR.1"
"UBR.2"
"VBR.1"
"VBR.2"
"VBR.3" "Other"
6400 NSP Specific
A to Z
Usage Parameter Control [c4az_upc]
This is the usage parameter control type.
Enum (4) pass,
tag, drop, none
W
Cast Type [c4az_cast]
This is the cast type.
W
Enum (9)
p2mp-leaf,
p2mp-root, p2p,
none
Z to A
Usage Parameter Control [c4za_upc]
This is the usage parameter control type.
Enum (4) pass,
tag, drop, none
W
Cast Type [c4za_cast]
This is the cast type.
W
Enum (9)
p2mp-leaf,
p2mp-root, p2p,
none
Cisco 6400 Equipment Module Configuration Guide
OL-1812-01
A-21
Appendix A
Attribute Reference
NRP Internal PVC
NRP Internal PVC
Object Name: C4cxPvcx
OAF: C4cxPvcx.oaf
Table A-9
NRP Internal PVC
Attributes
Acceptable Values
Default Values
Common Attributes
Name [srname]
Text (30)
Specify a name for the cross connection.
M|C
Customer [vpn]
Text (16)
This is the customer name.
W
Domain [domain]
Text (16)
This is the domain name.
W
Profile [srprofile.sy_profname]
Text (32)
This is a pointer for the PVC profile object.
R
Contained/Carried By
Network [srnode.srnetwork.srname]
Text (32)
This is the network containing the PVC.
R
Node [srnode.srname]
Text (32)
This is the node containing the PVC.
R
LPort [z_tp.srname]
Text (32)
This is the logical port associated with the PVC.
R
Access Control List [c4acl.acl_id]
Text (32)
The access control list for this PVC.
R
6400 NRP Specific
Description [c4_description]
Text (80)
This is a description of the interface. This attribute applies only on a
point to point subinterface. For a multipoint subinterface, this
attribute is fulfilled by upload only.
W
Cisco 6400 Equipment Module Configuration Guide
A-22
OL-1812-01
Appendix A
Attribute Reference
NRP Internal PVC
Table A-9
NRP Internal PVC (continued)
Attributes
Acceptable Values
CNX Type [c4_type]
Enum (11)
subscriber, service,
multihop_in,
idsl_sub, pppip,
other
This is the CNX type.
W
Service Name [c4_servicename]
Default Values
Text (32)
This attribute is used only on a Subscriber C4CNX-Static Domain
binding.
W
Sub-interface Type [c4_subif]
numb (10)
Range=1-214748364
7
This is the sub interface number.
W
Unnumbered IP Address [c4_unnumbered]
Text (40)
The unnumbered IP address of the sub interface.
W
Sub-interface IP Address [c4_subifipaddr]
Text (15)
The IP address of the subinterface.
W
Sub-interface Network Mask [c4_subifmask]
Text (15)
The subinterface mask number.
W
Bridge Group [c4_bgroup]
The sub interface bridge group. Zero (0) indicates there is no bridge
group for the sub interface.
Numb (10)
Range=1-214748364
7
W
Circuit Type [ratype]
Text (2)
VC
The circuit type (VC or VP).
W
PVC Handler [c4_handler]
Text (15)
An optional handle for the PVC. This should be a unique name.
W
VPI [c4_z_vpi]
Specify the VPI for endpoint Z.
W
VCI [c4_z_vci]
Specify the VCI for endpoint Z.
W
Numb (3)
Range=0-255 for
NRP, 0-15 for NRP2
Numb (4)
Range=1-2047 for
NRP, 1-1023 for
NRP2
PVC Mapping on IP
Cisco 6400 Equipment Module Configuration Guide
OL-1812-01
A-23
Appendix A
Attribute Reference
NRP Internal PVC
Table A-9
NRP Internal PVC (continued)
Attributes
Acceptable Values
Next-Hop IP Address [c4_remtipaadr]
Text (15)
Default Values
The IP address of the remote end of the PVC sub interface.
W
Upper Layer Protocol [c4_protocol]
This is the upper layer protocol type.
W
Enum (14)
ip_broadcast,
ip_nobroadcast,
inarp, none
VC Class Attributes
QoS Class [c4_qos]
This indicates the class of service.
W
Enum (9)
NRP1 supports UBR
and nrt.VBR only.
NRP2 supports UBR
and nrt.VBR only.
NSP supports CBR
PCR [c4_pcr]
This is the peak cell rate, which is the maximum allowed cell
transmission rate (expressed in cells per second). It defines the
shortest time period between cells and provides the highest guarantee
that network performance objectives (based on cell loss ratio) are met.
Numb (10)
365566
Range=0-214748364
7
W
MCR [c4_mcr]
The minimum cell rate.
W
NRP-NSP Bandwidth [c4_az_bandwidth]
This is the A - Z bandwidth from the NRP/NRP2 to the NSP.
W
NSP-NRP Bandwidth [c4_za_bandwidth]
This is the Z - A bandwidth from the NSP to the NRP/NRP2.
W
Encapsulation [c4_encapsulation]
This is the encapsulation type.
W
Numb (10)
0
Range=0-214748364
7
0
Numb (10)
Range=0-214748364
7
Numb (10)
0
Range=0-214748364
7
Enum (10)
aal5ciscoppp,
aal5autoppp,
aal5snap, aal5mux
Virtual Template Attributes
Cisco 6400 Equipment Module Configuration Guide
A-24
OL-1812-01
Appendix A
Attribute Reference
Singlehop Tunnel
Table A-9
NRP Internal PVC (continued)
Attributes
Acceptable Values
Authentication [c4_authenticate]
ms-chap, pap, chap,
callin, optional,
one-time (or a
combination of these
in the correct
sequence)
This is the authentication type.
W
Unnumbered IP Address in VT [c4_vt_ipaddr]
Default Values
Text (40)
Specify an interface or subinterface that will enable IP without a static
IP address (i.e. fastethernet 0/0/0).
W
Singlehop Tunnel
Object Name: C4mtTunnel
OAF: C4mtTunnel.oaf
Table A-10 Singlehop Tunnel
Attributes
Acceptable Values
Default Values
Common Attributes
Customer [vpn]
Text (16)
This is the customer name.
W
Domain [domain]
Text (16)
This is the domain name.
W
Tunnel Specific Parameters
Service Name [servicename]
Text (32)
This is a key for binding subscriber traffic. This attribute is valid for
tunnels of type dial_out_s only.
W
Dial In/Out [dial_type]
This is the dial type for the tunnel.
Enum (10)
dial_out_s, other
W
Tunnel Type [tunneltype]
Enum (4) l2tp, 12f,
Specify the tunnel type.
W
Cisco 6400 Equipment Module Configuration Guide
OL-1812-01
A-25
Appendix A
Attribute Reference
Multihop Tunnel
Table A-10 Singlehop Tunnel (continued)
Attributes
Acceptable Values
Tunnel Name [tunnelname]
Text (32)
Default Values
The is the tunnel named used for authentication at a remote site./
W
Tunnel Password [password]
Text (32)
This is the tunnel password.
W
Contained/Carried By
Radius [c4radius.srname]
Text (32)
This is the RADIUS server that deposits this tunnel.
R
Multihop Tunnel
Object Name: C4mtTunnel
OAF: C4mtTunnel.oaf
Table A-11 Multihop Tunnel
Attributes
Acceptable Values
Default Values
Common Attributes
Customer [vpn]
Text (16)
This is the customer name.
W
Domain [domain]
Text (16)
This is the domain name.
W
Tunnel Specific Parameters
VPDN Group [tunnelid]
Text (32)
The VDPN group for the tunnel.
W
Tunnel Name [tunnelname]
Text (64)
The tunnel name for authentication on a remote site.
W
Tunnel Password [password]
Text (32)
The tunnel password for authentication.
W
Cisco 6400 Equipment Module Configuration Guide
A-26
OL-1812-01
Appendix A
Attribute Reference
Multihop Tunnel
Table A-11 Multihop Tunnel (continued)
Attributes
Acceptable Values
Remote Tunnel Name [rtunnel]
Text (64)
Default Values
The tunnel name for the counterpart at the LAC. This attribute applies
to only MHIT).
W
Remote Tunnel Password [rpassword]
Text (32)
The remote tunnel password (MHIT only).
W
Authentication Type [authentication]
ms-chap, pap, chap,
callin, optional,
one-time (or a
combination of these
in the correct
sequence)
This is the authentication type.
W
Enable IP Processing Without an Explicit IP Address [c4_vt_ipaddr]
Text (40)
Specify the interface that you want IP enabled on without assigning a
specific IP address (i.e. fastethernet 0/0/0). This attribute is used
when configuring a virtual template to assign PPP features to a PVC.
W
Dial In/Out [dial_type]
Enum (8) dial_in,
dial_out, other
This is the dial type for the tunnel.
W
Tunnel Type [tunneltype]
Enum (5) l2tp, 12f,
pppoe
Specify the tunnel type.
W
Contained/Carried By
LPort [c4lport.srname]
Text (32)
The logical port that contains the tunnel.
R
Node [c4node.srname]
Text (32)
The node that contains the tunnel.
R
Network [c4node.srnetwork.srname]
Text (32)
The network that contains the tunnel.
R
Virtual Template [c4vt.vtindex]
Text (32)
A pointer to the virtual template. This attribute is required for dial_in
type tunnels.
R
Cisco 6400 Equipment Module Configuration Guide
OL-1812-01
A-27
Appendix A
Attribute Reference
Aggregation Key
Aggregation Key
Object Name: C4akAggrKey
OAF: C4akAggrKey.oaf
Table A-12 Aggregation Key
Attributes
Acceptable Values
Customer [vpn]
Text (16)
Default Values
This is the customer name. This attribute is optional.
Domain [domain]
Text (16)
This is the domain name. This attribute is optional.
Cisco 6400 Equipment Module Configuration Guide
A-28
OL-1812-01
Appendix A
Attribute Reference
Singlehop Tunnel Destination
Table A-12 Aggregation Key (continued)
Attributes
Acceptable Values
Default Values
Common Parameters
Aggregation Key [aggrkey]
Text (64)
This is the type of aggregation key.
Aggregation Type [aggrtype]
Enum (10)
This is the cost of crossing the sub-network. This attribute is used by TunnelName, Domain
the Threader to determine the lowest cost path when threading a
service.
50
M
Contained/Carried By
Multihop Tunnel [c4mtunnel.tunnelname]
Text (32)
This is the pointer to the tunnel aggregator (MHET).
R
NRP [c4mtunnel.c4lport.srname]
Text (32)
This is the logical port that contains the NRP/NRP2.
R
Node [c4mtunnel.c4node.srname]
Text (32)
This is the node that contains the NRP/NRP2.
R
Singlehop Tunnel Destination
Object Name: C4tdTnldest
OAF: C4tdTnldest.oaf
Table A-13 Singlehop Tunnel Destination
Attributes
Acceptable Values
Default Values
Common Attributes
Customer [vpn]
Text (16)
This is the customer name.
W
Domain [domain]
Text (16)
This is the domain name.
W
Cisco 6400 Equipment Module Configuration Guide
OL-1812-01
A-29
Appendix A
Attribute Reference
Multihop Tunnel Destination
Table A-13 Singlehop Tunnel Destination (continued)
Attributes
Acceptable Values
Default Values
Authenticator Specific Parameters
Destination IP Address [dest_ip]
Text (15)
The destination IP address.
W
Session Limit [sessionlimit]
Numb (5)
The limit for the number of sessions that can run over the tunnel. A -1 Range=0-32767
indicates no delivery.
0
W
Priority [priority]
The priority for the tunnel destination.
Numb (5)
Range=1-32767
1
W
Contained/Carried By
Tunnel [c4tunel.tunnelname]
Text (32)
A pointer to the SHTunnel object.
R
Radius [c4tunnel.c4radius.srname]
Text (32)
A pointer to the RADIUS server containing the tunnel.
R
Multihop Tunnel Destination
Object Name: C4tdTnldest
OAF: C4tdTnldest.oaf
Table A-14 Multihop Tunnel Destination
Attributes
Acceptable Values
Default Values
Common Attributes
Customer [vpn]
Text (16)
This is the customer name.
W
Domain [domain]
Text (16)
This is the domain name.
W
Cisco 6400 Equipment Module Configuration Guide
A-30
OL-1812-01
Appendix A
Attribute Reference
Service List
Table A-14 Multihop Tunnel Destination (continued)
Attributes
Acceptable Values
Default Values
Tunnel Specific Parameters
Destination IP Address [dest_ip]
Text (15)
The destination IP address. This is the IP address of the LNS.
W
Session Limit [sessionlimit]
Text (10)
The maximum number of sessions per tunnel.
W
Priority [priority]
Text (10)
The priority for the tunnel destination.
W
Contained/Carried By
Multihop Tunnel [c4mtunnel.tunnelname]
Text (32)
A pointer to the multihop tunnel.
R
NRP [c4mtunnel.c4lport.srname]
Text (32)
The NRP/NRP2 for the multihop tunnel.
R
Node [c4mtunnel.c4node.srname]
Text (32)
The node that contains the multihop tunnel.
R
Service List
Object Name: C4slSservlist
OAF: C4slSservlist.oaf
Table A-15 Service List
Attributes
Acceptable Values
Default Values
Common Attributes
Domain [domain]
Text (16)
This is the domain name.
W
Customer [vpn]
Text (16)
This is the customer name.
W
Cisco 6400 Equipment Module Configuration Guide
OL-1812-01
A-31
Appendix A
Attribute Reference
IOS QOS
Table A-15 Service List (continued)
Attributes
Acceptable Values
Default Values
Service List Parameters
Subscriber ID [subscriberid]
Text (64)
Specify the subscriber ID.
W
Service Name [servicename]
Text (255)
This is the service associated with the tunnel.
W
Contained/Carried By
Radius [c4radius.srname]
Text (32)
A pointer to the RADIUS server containing the tunnel.
R
IOS QOS
Object Name: C4iqQos
OAF: C4iqQos.oaf
Table A-16 IOS QOS
Attributes
Acceptable Values
Default Values
Common Attributes
Domain [domain]
Text (16)
This is the domain.
W
Customer [vpn]
Text (16)
This is the customer.
W
IOS QoS Parameters
Quality of Service [qos]
This is the quality of service (QoS).
M|C
SCR [scr]
Enum (9) "CBR"
"UBR" "ABR"
"rt_VBR.1"
"rt_VBR" "nrt_VBR"
"nrt_VBR.1" "none"
Numb (10)
SCR is the maximum average cell transmission rate that is allowed Range=0-214748364
over a given period of time on a given circuit. It allows the network 7
to allocate sufficient resources for guaranteeing the network
performance objectives are met.
0
C
Cisco 6400 Equipment Module Configuration Guide
A-32
OL-1812-01
Appendix A
Attribute Reference
VC Class
Table A-16 IOS QOS (continued)
Attributes
Acceptable Values
Default Values
PCR [pcr]
Numb (10)
Range=0-214748364
7
0
Numb (10)
Range=0-214748364
7
0
Numb (10)
Range=0-214748364
7
0
Numb (10)
Range=0-214748364
Cell Delay Variation Tolerance establishes the time scale over which
7
the PCR is policed. This is set to allow for jitter (CDV).
0
PCR is the maximum allowed cell transmission rate. It defines the
shortest time period between cells and provides the highest
guarantee that network performance objectives (based on cell loss
ratio) will be met.
C
MCR [mcr]
MCR is the minimum cell rate, which is the minimum allocated
bandwidth for a connection.
C
MBS [mbs]
MBS is the maximum number of cells that can be received at the
PCR. This allows a burst of cells to arrive at a rate higher than the
SCR. If the burst is larger than anticipated, the additional cells are
either tagged or dropped. This parameter applies only to VBR traffic.
C
CDVT [cdvt]
C
Contained By
Node [srnode.srname]
Text (32)
This is the node that you are configuring QoS templates on.
R|A
VC Class
Object Name: C4clVCClass
OAF: C4clVCClass.oaf
Table A-17 VC Class
Attributes
Acceptable Values
Default Values
Common Attributes
Domain [domain]
Text (16)
This is the domain. This attribute is optional.
W
Cisco 6400 Equipment Module Configuration Guide
OL-1812-01
A-33
Appendix A
Attribute Reference
VC Class
Table A-17 VC Class (continued)
Attributes
Acceptable Values
Customer [vpn]
Default Values
Text (16)
This is the customer. This attribute is optional.
W
VC-Class Parameters
VC-Class Name [vcclassname]
Text (16)
This is the VC-Class name as in IOS. By default, this value is
autocalculated, but a value can be supplied.
M|C
Service Name [c4_servicename]
Text (32)
This is the service name key that associates a subscriber with a tunnel.
This attribute is used for static binding only. For dynamic binding,
leave this field empty.
C
QOS [qos]
This is the quality of service.
C
PCR [pcr]
PCR is the maximum allowed cell transmission rate. It defines the
shortest time period between cells and provides the highest guarantee
that network performance objectives (based on cell loss ratio) will be
met.
Enum (9) "CBR"
"UBR" "UBR+"
"ABR" "rt_VBR.1"
"rt_VBR"
"nrt_VBR"
"nrt_VBR.1"
"Other"
Numb (10)
Range=0-214748364
7
0
Numb (10)
Range=0-214748364
7
0
Numb (10)
Range=0-214748364
7
0
Numb (10)
Range=0-214748364
7
0
C
MCR [mcr]
MCR is the minimum cell rate, which is the minimum allocated
bandwidth for a connection.
C
NRP->NSP Bandwidth [az_bandwidth]
This is the bandwidth in cells/s from the NRP/NRP2 to the NSP.
M|C
NSP->NRP Bandwidth [za_bandwidth]
This is the bandwidth in cells/s from the NSP to the NRP/NRP2.
M|C
Cisco 6400 Equipment Module Configuration Guide
A-34
OL-1812-01
Appendix A
Attribute Reference
VC Class
Table A-17 VC Class (continued)
Attributes
Acceptable Values
Encapsulation [encapsulation]
Enum (12)
"aal5ciscoppp"
"aal5autoppp"
"aal5snap"
"aal5mux"
"aal5nlpid"
Specify the ATM adaptation layer (aal) and the encapsulation type.
C
Used In [c4_use]
This is the use parameter. Specify the type of service which will use
this VC Class.1
C
Default Values
Enum (7) "ppp"
"pppoe" "pppof"
"service" "pppip"
"other"
Cisco 6400 Equipment Module Configuration Guide
OL-1812-01
A-35
Appendix A
Attribute Reference
Virtual Template
Table A-17 VC Class (continued)
Attributes
Acceptable Values
Default Values
Virtual Template Parameters
Authentication [authentication]
Text (80)
This is the authentication type. When none is selected, no
authentication will be performed. PAP will enable Password
Authentication Protocol to authenticate the tunnel. CHAP will enable
Challenge Handshake Authentication Protocol to authenticate the
tunnel.
C
Unnumbered IP Address [c4_vt_ipaddr]
Text (40)
Specify an interface or subinterface that will enable IP without a static
IP address (i.e. fastethernet 0/0/0).
C
Contained By
LPort [z_tp.srname]
Text (32)
This is the logical port that contains this VC class.
R|A
Node [srnode.srname]
Text (32)
This is the node that contains the VC class.
R|A
1. Restrictions for each usage parameter are described in Table A-18.
Virtual Template
Object Name: C4vtVT
OAF: C4vtVT.oaf
Table A-18 Virtual Template
Attributes
Acceptable Values
Default Values
Common Attributes
Domain [domain]
Text (16)
This is the domain. This attribute is optional.
W
Customer [vpn]
Text (16)
This is the customer. This attribute is optional.
W
Cisco 6400 Equipment Module Configuration Guide
A-36
OL-1812-01
Appendix A
Attribute Reference
Virtual Template
Table A-18 Virtual Template (continued)
Attributes
Acceptable Values
Default Values
Virtual Template Parameters
Virtual-Template index [vtindex]
Numb (4)
This is the virtual template index number that is auto assigned by IOS. Range=0-2000
0
A
Description [c4_description]
Text (80)
""
Text (80)
""
Text (40)
FastEthernet0/0/0
This is a text field provided for a usage description of the virtual
template object. For example, one virtual template could be used for a
PPPoA subscriber without termination, and another could be used for
a PPPoE subscriber with termination on the NRP/NRP2. This attribute
is optional.
W
Authentication [authentication]
This is the authentication type. When none is selected, no
authentication will be performed. PAP will enable Password
Authentication Protocol to authenticate the tunnel. CHAP will enable
Challenge Handshake Authentication Protocol to authenticate the
tunnel.
W
Enable IP Processing Without [c4_vt_ipaddr]
Specify an interface or subinterface that will enable IP without a static
IP address (i.e. fastethernet 0/0/0)
C
Used In [c4_use]
This is the use parameter. Specify the type of service which will use the
virtual template. If "ppp"
aal5autoppp
"aal5snap"
"pppoe"
"multi-hop in"
"other"
Contained By
Node [srnode.srname]
Lport [z_tp.srname]
Cisco 6400 Equipment Module Configuration Guide
OL-1812-01
A-37
Appendix A
Attribute Reference
Access Control List
Access Control List
Table A-19 Access Control List
Attributes
Acceptable Values
Default Values
Common Attributes
Domain [domain]
Customer [vpn]
Profile [srprofile.sy_profname]
Control List Parameters
Access Control List ID [acl_id]
Description [name]
Contained/Carried By
Lport [nrp.srname]
Node [nrp.srnode.srname]
Network [nrp.srnode.srnetwork.srname]
Cisco 6400 Equipment Module Configuration Guide
A-38
OL-1812-01
Appendix A
Attribute Reference
Access Control Element
Access Control Element
Table A-20 Access Control Element
Attributes
Acceptable Values
Default Values
Common Attributes
Domain [domain]
Customer [vpn]
Access Control Element Parameters
Service Name [ace_service]
Source Type [source_type]
Source IP [source_ip_addr]
Source Mask [source_mask]
Destination Type [dest_type]
Destination IP [dest_ip_addr]
Cisco 6400 Equipment Module Configuration Guide
OL-1812-01
A-39
Appendix A
Attribute Reference
Route Entry
Table A-20 Access Control Element (continued)
Attributes
Acceptable Values
Default Values
Destination Mask [dest_mask]
Contained By
Access Control List [c4acl.acl_id]
Lport [nrp.srname]
Node [srnode.srname]
Network [srnode.srnetwork.srname]
Route Entry
Table A-21 Route Entry
Attributes
Acceptable Values
Default Values
Common Attributes
Customer [vpn]
Domain [domain]
Profile [srprofile.sy_profname]
Route Entry Specific Parameters
Cisco 6400 Equipment Module Configuration Guide
A-40
OL-1812-01
Appendix A
Attribute Reference
Authenticator
Table A-21 Route Entry (continued)
Attributes
Acceptable Values
Default Values
Acceptable Values
Default Values
IP Address [ip_address]
Netmask [mask]
Mapping Target [target]
Contained/Carried By
LPORT [c4lport.srname]
Node [c4lport.srnode.srname]
Network [c4lport.srnetwork.srname]
Authenticator
Table A-22 Authenticator
Attributes
Common Attributes
Customer [vpn]
Domain [domain]
Cisco 6400 Equipment Module Configuration Guide
OL-1812-01
A-41
Appendix A
Attribute Reference
Physical Port Profile
Table A-22 Authenticator (continued)
Attributes
Acceptable Values
Default Values
Profile [srprofile.sy_profname]
Authenticator Specific Parameters
Username [username]
Password [password]
‘
Text (255)
The password for authentication.
W
Encrypted [encrypted]
Bool (5)
Use this attribute to set encryption for authentication.
R
Contained/Carried By
LPORT [c4lport.srname]
Text (32)
The containing logical port.
R
Node [c4lport.srnode.srname]
Text (32)
The containing node.
R
Network [c4lport.srnetwork.srname]
Text (32)
The containing network.
R
Physical Port Profile
Table A-23 Physical Port Profile
Attributes
Acceptable Values
Default Values
Common Attributes
Name [sy_profname]
Text (24)
This is the physical port profile name.
W
Cisco 6400 Equipment Module Configuration Guide
A-42
OL-1812-01
Appendix A
Attribute Reference
Physical Port Profile
Table A-23 Physical Port Profile (continued)
Attributes
Acceptable Values
Customer [vpn]
Text (16)
Default Values
This is the customer name.
W
Domain [domain]
Text (16)
This is the domain name.
W
Port Type [srporttype]
Enum (5) DS3, OC3,
OC12, CPU, NRP,
NRP2, Other
Indicates the type of port.
W
Provisionable Bandwidth (kbits/s) [srbandwidth]
Numb (10)
0
Range=0-214748364
7
Indicates the total bandwidth of the port, in kbits/s.
Max PDU Size (bytes) [srmaxpdusize]
Numb (10)
53
Range=0-214748364
7
INdicates the maximum PDU size, in bytes.
Class [srclass]
Text (4)
C4pp
The CPC class for this physical port profile object.
Maximum Channels [srmazchans]
Numb (10)
0
Range=0-214748364
7
This attribute is not used with this release.
Administrative State [sradminstatus]
Enum (8) Locked,
Unlocked
Indicates the administrative state of the physical port profile.
Resource Model Specific Map [srrmmap]
Numb (10)
0
Range=0-214748364
7
Resource model specific map.
R
First Channel on this Pport [srstartchan]
Numb (10)
1
Range=0-214748364
7
The channel number of the first channel on this port.
W
Reserved Channels [srrezchanmap]
Text (38)
This attribute is not used.
User Label [sruserlabel]
Text (64)
Use this field to add user information.
W
6400 Physical Port Parameters
Access Name [c4_accname]
Text (32)
The IOS account name for the NRP/NRP2 associated with this port.
W
Cisco 6400 Equipment Module Configuration Guide
OL-1812-01
A-43
Appendix A
Attribute Reference
Logical Port Profile
Table A-23 Physical Port Profile (continued)
Attributes
Acceptable Values
Access Password [c4_accpasswd]
Text (32)
Default Values
The IOS account password for the NRP/NRP2 associated with this
port.
W
Enable Password [c4_enablepasswd]
Text (32)
IOS enable password for the NRP/NRP2 associated with the physical
port.
NRP IP Address [srmgmtaddress]
Text (15)
This the IP address for the NRP card. Do not use this attribute if you
are using an NRP2 card.
Redundant [c4_redundant]
Bool (5)
FALSE
Acceptable Values
Default Values
Indicates if there is a redundant physical port. NRP2 cards do not
support redundancy.
Logical Port Profile
Object Name: C4lpLportProfile
OAF: C4lpLportProfile.oa
f
Table A-24 Logical Port Profile
Attributes
Common Attributes
Name [sy_profname]
Text (24)
This is the logical port profile name.
W
Customer [vpn]
Text (16)
This is the customer name.
W
Domain [domain]
Text (16)
This is the domain name.
W
Protocol [srprotocol]
Text (10)
"ATM"
Specify the protocol.
M
Cisco 6400 Equipment Module Configuration Guide
A-44
OL-1812-01
Appendix A
Attribute Reference
Logical Port Profile
Table A-24 Logical Port Profile (continued)
Attributes
Acceptable Values
Signalling Role [srsignallingrole]
Enum (3) "DTE"
"DCE"
A DCE logical port represents the "network side" equipment. This
logical port type supports all types of PVCs. A DTE is almost identical
to the DCE logical port except for SVC applications. It assumes the
role of the "user side" of the UNI signalling interface.
Default Values
W
NNI Enable [srnnienabled]
Bool (5)
You can enable or disable NNI for the logical port.
W
Admin Status [sradminstatus]
Enum (12) "Locked"
"Unlocked"
"ShuttingDown"
Specify the administrative status for the logical port.
W
Maximum Connections [srconnections]
Numb (10)
Range=0-214748364
Specify the maximum number of connections for the logical port. For
7
internal ports it is 2048.
0
W
Class [srclass]
Text (4)
"C4lp"
The CPC class for this logical port object.
R|A
Resource Map [srrmmap]
Numb (10)
48
Range=0-214774836
47
Resource model specific map.
W
QOS [srqos]
Text (32)
Specify the Quality of Service
W
Group [srgroup]
Text (32)
Specifies the logical group membership. Allows several logical ports to
be put in a common group as a pooled resource.
W
Priority [srpriority]
The logical port usage priority.
W
Multiple Service Ranges [srmultirange]
Numb (10)
Range=0-214748364
7
0
Bool (5)
Indicates if there are multiple ranges for the logical port.
W
Cisco 6400 Equipment Module Configuration Guide
OL-1812-01
A-45
Appendix A
Attribute Reference
Logical Port Profile
Table A-24 Logical Port Profile (continued)
Attributes
Acceptable Values
Multiple Fabric Ranges [sremultirange]
Bool (5)
Default Values
Indicates if there are multiple fabric ranges for the logical port.
W
Multiple Reserved Ranges [srmultiresrange
Bool (5)
Indicated if there are multiple reserved ranges for the logical port.
W
User Label [sruserlabel]
Text (64)
’" "
Text (32)
DDDDDDDDDD
DDDDDDDDDD
DDDDDDDDDD
DD
Use this field to add user information.
W
Service Map [srservmap]
Map of supported service types.
W
Cisco 6400 Equipment Module Configuration Guide
A-46
OL-1812-01
Appendix A
Attribute Reference
Logical Port Profile
Table A-24 Logical Port Profile (continued)
Attributes
Acceptable Values
Default Values
Bandwidth
Incoming
Maximum (kbits/s) [sraz_bandwidth]
The maximum incoming bandwidth for the logical port.
W
Nominal Threshold (%) [sraz_cbnt]
Specify the incoming committed bandwidth nominal threshold
percentage.
Numb (10)
Range=0-214748364
7
Numb (10)
Range=0-214748364
7
100
Numb (10)
Range=0-214748364
7
0
W
Provisionable (kbits/s) [sraz_cbw]
The incoming committed bandwidth is auto-calculated based on the
nominal threshold and bandwidth.
W
Outgoing
Maximum (kbits/s) [srza_bandwidth]
The maximum outgoing bandwidth for the logical port.
W
Nominal Threshold (%) [srza_cbnt]
Specify the outgoing committed bandwidth nominal threshold
percentage
Numb (10)
Range=0-214748364
7
Numb (10)
Range=0-214748364
7
100
Numb (10)
Range=0-214748364
7
0
W
Provisionable (kbits/s) [srza_cbw]
The outgoing committed bandwidth is auto-calculated based on the
nominal threshold and bandwidth
W
6400 NRP Specific
Routing [c4_routing]
Bool (5)
Specify whether to enable or disable routing.
W
Tunneling [c4_tunneling]
Bool (5)
Specify whether to enable or disable tunneling.
W
Multihopping [c4_multihop]
Bool (5)
Specify whether to enable or disable multihopping.
W
Cisco 6400 Equipment Module Configuration Guide
OL-1812-01
A-47
Appendix A
Attribute Reference
Cross Connection Profile
Table A-24 Logical Port Profile (continued)
Attributes
Acceptable Values
Host Name [c4_hostname]
Text (32)
Default Values
The host name for the NRP/NRP2 associated with the logical port.
M|R
IOS Version [c4_iosversion]
Text (32)
Specifies the IOS version being used.
M|R
Maximum Internal Connections [c4_maxintpvcs]
Numb (10)
Range=0-214748364
Specifies the maximum number of internal connections for the logical
7
port.
2048
M
Primary Radius Server [c4_rad_name1]
Text (32)
Specifies the primary RADIUS server.
W
Backup Radius Server [c4_rad_name2]
Text (32)
Specifies the backup RADIUS server
W
Cross Connection Profile
Object Name: C4vcPvcxProf
OAF: C4vcPvcxProf.oaf
Table A-25 Cross Connection Profile
Attributes
Acceptable Values
Default Values
Common Attributes
Name [sy_profname]
Text (24)
This is the cross connection profile name.
W
Customer [vpn]
Text (16)
This is the customer name.
W
Domain [domain]
Text (16)
This is the domain name.
W
Cisco 6400 Equipment Module Configuration Guide
A-48
OL-1812-01
Appendix A
Attribute Reference
Cross Connection Profile
Table A-25 Cross Connection Profile (continued)
Attributes
Acceptable Values
Recovery Priority [srpriority]
Numb (10)
Range=0-214748364
This is the recovery priority for NNI resiliency.The lower the value, the
7
higher the priority; 0 having infinitely low priority, and 1 having the
highest priority.
Default Values
0
M
UNI Recovery Priority [srunipriority]
Numb (10)
Range=0-214748364
This is the recovery priority for UNI resiliency. The lower the value,
the higher the priority; 0 having infinitely low priority, and 1 having the 7
highest priority.
0
W
Provider Service [srdestserv]
Text (32)
This is the Provider Service.
W
ATM Lport Associations
A Endpoint
Enable Frame Discard [raa_frdisc]
Bool (5)
This attribute specifies whether to enable frame discard.
Z Endpoint
Enable Frame Discard [raz_frdisc]
Bool (5)
This attribute specifies whether to enable frame discard.
ATM Attributes
Circuit Type [ratype]
Enum (2) "VC"
"VP"
This is the circuit type. It can be either a virtual circuit (VP) or virtual
path (VP).
Class of Service [raqos]
You can specify the class of service for ATM traffic. The class of
service determines which traffic descriptor you can select.
W
Fixed Round-Trip Time [ra_frtt]
This attribute specifies the round-trip time in milliseconds.
Enum (7) "CBR"
"ABR" "UBR"
"rt_VBR"
"nrt_VBR"
Numb (8)
Range=0-16700000
0
A to Z Direction
Bandwidth (kbits/s) [sraz_bandwidth]
This is the bandwidth consumed by the A endpoint for the AZ
direction.
Numb (10)
Range=0-214748364
7
M|W
Primary logical port [sra_primtp]
Text (44)
The original logical port that is being backed up by UNI resiliency
(nodename/portname).
Cisco 6400 Equipment Module Configuration Guide
OL-1812-01
A-49
Appendix A
Attribute Reference
Cross Connection Profile
Table A-25 Cross Connection Profile (continued)
Attributes
Acceptable Values
Default Values
Sustainable Cell Rate (cells/s) [raaz_scr]
SCR is the maximum average cell transmission rate that is allowed over
a given period of time on a given circuit. It allows the network to
allocate sufficient resources for guaranteeing the network performance
objectives are met.
W
Peak Cell Rate (cells/s) [raaz_pcr]
Numb (10)
Range=0-214748364
PCR is the maximum allowed cell transmission rate. It defines the
shortest time period between cells and provides the highest guarantee 7
that network performance objectives (based on cell loss ratio) will be
met.
0
W
Minimum Cell Rate (cells/s) [raaz_mcr]
MCR is the minimum cell rate, which is the minimum allocated
bandwidth for a connection.
Numb (10)
0
Range=0-214748364
7
W
Maximum Burst Size (cells) [raaz_mbs]
Numb (10)
Range=0-214748364
MBS is the maximum number of cells that can be received at the PCR.
This allows a burst of cells to arrive at a rate higher than the SCR. If 7
the burst is larger than anticipated, the additional cells are either tagged
or dropped. This parameter applies only to VBR traffic.
0
W
CDVT (microseconds) [raaz_cdvt]
Cell Delay Variation Tolerance establishes the time scale over which
the PCR is policed. This is set to allow for jitter (CDV).
Numb (10)
Range=0-214748364
7
0
W
Traffic Desc [raaz_tdtype]
Enum (7) "None"
"ABR_FC"
This is the traffic descriptor type which describes the specified traffic
"ABR_NFC"
parameters for the service (for more information consult the ATM
"CBR.1" "UBR.1"
Service Application Solutions Guide).
"UBR.2" "VBR.1"
M|W
"VBR.2" "VBR.3"
"Other"
Z to A Direction
Bandwidth (kbits/s) [srza_bandwidth]
This is the bandwidth consumed by the Z endpoint for the ZA
direction.
Primary logical port [srz_primtp]
Numb (10)
Range=0-214748364
7
Text (44)
The original logical port that is being backed up by UNI resiliency
(nodename/portname).
Cisco 6400 Equipment Module Configuration Guide
A-50
OL-1812-01
Appendix A
Attribute Reference
Cross Connection Profile
Table A-25 Cross Connection Profile (continued)
Attributes
Acceptable Values
Default Values
Numb (10)
Range=0-214748364
7
0
Numb (10)
Range=0-214748364
MBS is the maximum number of cells that can be received at the PCR.
This allows a burst of cells to arrive at a rate higher than the SCR. If 7
the burst is larger than anticipated, the additional cells are either tagged
or dropped. This parameter applies only to VBR traffic.
0
Sustainable Cell Rate (cells/s) [raza_scr]
SCR is the maximum average cell transmission rate that is
allowed over a given period of time on a given circuit. It allows
the network to allocate sufficient resources for guaranteeing the
network performance objectives are met.
W
Peak Cell Rate (cells/s) [raza_pcr]
PCR is the maximum allowed cell transmission rate. It defines the
shortest time period between cells and provides the highest guarantee
that network performance objectives (based on cell loss ratio) will be
met.
W
Minimum Cell Rate (cells/s) [raza_mcr]
MCR is the minimum cell rate, which is the minimum allocated
bandwidth for a connection.
W
Maximum Burst Size (cells) [raza_mbs]
W
CDVT (microseconds) [raza_cdvt]
Cell Delay Variation Tolerance establishes the time scale over which
the PCR is policed. This is set to allow for jitter (CDV).
Numb (10)
Range=0-214748364
7
0
W
Traffic Desc [raza_tdtype]
Enum (7) "None"
"ABR_FC"
This is the traffic descriptor type which describes the specified traffic
"ABR_NFC"
parameters for the service (for more information consult the ATM
"CBR.1" "UBR.1"
Service Application Solutions Guide).
"UBR.2" "VBR.1"
M|W
"VBR.2" "VBR.3"
"Other"
Cisco 6400 Equipment Module Configuration Guide
OL-1812-01
A-51
Appendix A
Attribute Reference
NRP Internal PVC Profile
Table A-25 Cross Connection Profile (continued)
Attributes
Acceptable Values
Default Values
6400 NSP Specific
A to Z
Usage Parameter Control [c4az_upc]
This is the usage parameter control type.
Cast Type [c4az_cast]
This is the cast type.
Enum (4) pass, tag,
drop, none
Enum (9) p2mp-leaf,
p2mp-root, p2p,
none
Z to A
Usage Parameter Control [c4za_upc]
This is the usage parameter control type.
Cast Type [c4za_cast]
This is the cast type.
Enum (4) pass, tag,
drop, none
Enum (9) p2mp-leaf,
p2mp-root, p2p,
none
NRP Internal PVC Profile
Object Name: C4cxPvcxProf
OAF: C4cxPvcxProf.oaf
Table A-26 NRP Internal PVC Profile
Attributes
Acceptable Values
Default Values
Common Attributes
Name [sy_profname]
Text (24)
This is the PVC profile name. This attribute is mandatory.
M|C
Domain [domain]
Text (16)
This is the domain.
W
Customer [vpn]
Text (16)
This is the customer name.
W
6400 NRP Specific
Description [c4_description]
Text (80)
This is a description of the interface. This attribute applies only on a
point to point subinterface. For a multipoint subinterface, this attribute
is fulfilled by upload only.
W
Cisco 6400 Equipment Module Configuration Guide
A-52
OL-1812-01
Appendix A
Attribute Reference
NRP Internal PVC Profile
Table A-26 NRP Internal PVC Profile (continued)
Attributes
Acceptable Values
Default Values
CNX Type [c4_type]
Enum (11)
"subscriber"
Specify the connection type. This attribute is used to determine what
function the internal PVC will have. An NRP/NRP2 internal PVC can "service"
serve several roles. It can be a subscriber downlink involved in binding "multihop_in"
"idsl_sub" "pppip"
a subscriber stream to a tunnel, an ingress tunnel for multihop PPP
"other"
aggregation, a service uplink with tunnel support, or a termination
point for PPP sessions (PPPoA or PPPoE traffic) to be routed as IP
packets to their destination.
W
Service Name [c4_servicename]
Text (32)
This is the service name key that associates a subscriber with a tunnel.
This attribute is required if static binding is configured.
W
Sub-interface Type [c4_subiftype]
Enum (14)
"multipoint"
"tag-switching"
"point-to-point"
Specify the type of sub-interface that this internal PVC will use.
C
Bridge Group [c4_bgroup]
Numb (10)
Range=0-214748364
Indicates a bridge group. A value of 0 indicates no bridge group for this
7
subinterface.
0
R
Circuit Type [ratype]
Text (2)
"VC"
This is the circuit type. It can be either a virtual circuit (VP) or virtual
path (VP).
C
PVC mapping on IP (only for service CNX)
Upper Layer Protocol [c4_protocol]
This is the upper layer protocol for the PVC.
C
Enum (14)
"ip_broadcast"
"ip_nobroadcast"
"inarp" "none"
VC-Class Attributes
QoS Class [c4_qos]
Specify the QoS class.
W
Enum (9) "CBR"
"UBR" "UBR+"
"ABR" "rt_VBR.1"
"rt_VBR"
"nrt_VBR"
"nrt_VBR.1"
"Other"
Cisco 6400 Equipment Module Configuration Guide
OL-1812-01
A-53
Appendix A
Attribute Reference
NRP Internal PVC Profile
Table A-26 NRP Internal PVC Profile (continued)
Attributes
Acceptable Values
Default Values
PCR [c4_pcr]
Numb (10)
Range=0-214748364
7
365566
Numb (10)
Range=0-214748364
7
0
Numb (10)
Range=0-214748364
7
0
Numb (10)
Range=0-214748364
7
0
PCR is the maximum allowed cell transmission rate. It defines the
shortest time period between cells and provides the highest guarantee
that network performance objectives (based on cell loss ratio) will be
met.
W
MCR [c4_mcr]
MCR is the minimum cell rate, which is the minimum allocated
bandwidth for a connection.
W
NRP->NSP Bandwidth [c4_az_bandwidth]
The bandwidth from the NRP/NRP2 to the NSP.
C
NSP->NRP Bandwidth [c4_za_bandwidth]
The bandwidth from the NSP to the NRP/NRP2.
C
Encapsulation [c4_encapsulation]
Specify the ATM adaptation layer (aal) and the encapsulation type.
W
Enum (12)
"aal5ciscoppp"
"aal5autoppp"
"aal5snap"
"aal5mux"
Virtual Template Attributes
Authentication [c4_authenticate]
Text (80)
This is the authentication type. When none is selected, no
authentication will be performed. PAP will enable Password
Authentication Protocol to authenticate the tunnel. CHAP will enable
Challenge Handshake Authentication Protocol to authenticate the
tunnel.
W
Unnumbered IP Address in VT [c4_vt_ipaddr]
Text (40)
Specify the interface that you want IP enabled on without assigning a
specific IP address (i.e. fastethernet 0/0/0). This attribute is used when
configuring a virtual template to assign PPP features to a PVC.
W
Cisco 6400 Equipment Module Configuration Guide
A-54
OL-1812-01
Download PDF

advertising