Specifications | Compaq 2510p Laptop User Manual

HP Compaq 2510p Notebook PC
Maintenance and Service Guide
© Copyright 2007 Hewlett-Packard
Development Company, L.P.
Bluetooth is a trademark owned by its
proprietor and used by Hewlett-Packard
Company under license. Intel and Core are
trademarks or registered trademarks of Intel
Corporation or its subsidiaries in the United
States and other countries. Java is a US
trademark of Sun Microsystems, Inc.
Microsoft, Windows, and Windows Vista are
either trademarks or registered trademarks of
Microsoft Corporation in the United States
and/or other countries. SD Logo is a
trademark of its proprietor.
The information contained herein is subject to
change without notice. The only warranties
for HP products and services are set forth in
the express warranty statements
accompanying such products and services.
Nothing herein should be construed as
constituting an additional warranty. HP shall
not be liable for technical or editorial errors
or omissions contained herein.
First Edition: June 2007
Document Part Number: 447219-001
Safety warning notice
WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not
place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a
hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft
surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to contact
the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer and the AC
adapter comply with the user-accessible surface temperature limits defined by the International Standard
for Safety of Information Technology Equipment (IEC 60950).
iii
iv
Safety warning notice
Table of contents
1 Product description
2 External component identification
Display components ................................................................................................................. 5
Top components ...................................................................................................................... 6
Buttons and fingerprint reader .................................................................................... 6
Keys ........................................................................................................................ 7
Lights ....................................................................................................................... 8
Pointing devices ...................................................................................................... 10
Front components ................................................................................................................... 11
Left-side components ............................................................................................................... 12
Rear components ................................................................................................................... 13
Right-side components ............................................................................................................ 14
Bottom components ................................................................................................................ 16
3 Illustrated parts catalog
Serial number location ............................................................................................................ 18
Computer major components ................................................................................................... 19
Plastics Kit ............................................................................................................................. 25
Cable Kit .............................................................................................................................. 26
Mass storage devices ............................................................................................................. 27
Miscellaneous parts ................................................................................................................ 27
Sequential part number listing .................................................................................................. 29
4 Removal and replacement procedures
Preliminary replacement requirements ....................................................................................... 34
Tools required ......................................................................................................... 34
Service considerations ............................................................................................. 34
Plastic parts ............................................................................................. 34
Cables and connectors ............................................................................. 35
Drive handling ......................................................................................... 35
Grounding guidelines .............................................................................................. 36
Electrostatic discharge damage .................................................................. 36
Packaging and transporting guidelines ........................................ 37
Workstation guidelines .............................................................. 37
Equipment guidelines ................................................................. 38
Unknown user password .......................................................................................... 39
Component replacement procedures ........................................................................................ 40
v
Serial number ......................................................................................................... 40
Computer feet ......................................................................................................... 40
Battery ................................................................................................................... 41
SIM ....................................................................................................................... 42
Bluetooth module .................................................................................................... 43
Memory module ...................................................................................................... 45
RTC battery ............................................................................................................ 47
WLAN module ........................................................................................................ 48
Hard drive ............................................................................................................. 52
WWAN module ..................................................................................................... 54
Optical drive .......................................................................................................... 56
Switch cover ........................................................................................................... 57
Keyboard ............................................................................................................... 59
Display assembly .................................................................................................... 62
Top cover ............................................................................................................... 67
System board ......................................................................................................... 70
Speaker assembly ................................................................................................... 73
Fan/heat sink assembly ........................................................................................... 74
PC Card assembly ................................................................................................... 76
Modem module ...................................................................................................... 78
5 Computer Setup
Starting Computer Setup ......................................................................................................... 80
Using Computer Setup ............................................................................................................ 81
Navigating and selecting in Computer Setup .............................................................. 81
Restoring factory settings in Computer Setup ............................................................... 81
Computer Setup menus ........................................................................................................... 82
File menu ............................................................................................................... 82
Security menu ......................................................................................................... 83
Diagnostics menu .................................................................................................... 83
System Configuration menu ...................................................................................... 84
6 Specifications
Computer specifications .......................................................................................................... 86
12.1-inch, WXGA display specifications ................................................................................... 87
Hard drive specifications ........................................................................................................ 88
DVD±RW and CD-RW Double-Layer Combo Drive specifications ................................................. 89
DVD/CD-RW Combo Drive specifications ................................................................................. 90
DVD-ROM Drive ..................................................................................................................... 91
System DMA specifications ...................................................................................................... 92
System interrupt specifications ................................................................................................. 93
System I/O address specifications ............................................................................................ 94
System memory map specifications .......................................................................................... 96
7 Screw listing
Phillips PM2.0×5.0 captive screw ............................................................................................ 98
Phillips PM2.0×5.0 screw ..................................................................................................... 100
Phillips PM2.5×4.0 screw ..................................................................................................... 101
Torx T8M2.5×7.0 screw ....................................................................................................... 103
vi
Torx T8M2.5×4.0 screw .......................................................................................................
Phillips PM2.0×3.0 screw .....................................................................................................
Phillips PM1.5×3.0 screw .....................................................................................................
Torx T6M2.0×5.0 screw .......................................................................................................
Phillips PM2.0×4.0 screw .....................................................................................................
Phillips PM2.0×2.0 broad-head screw ....................................................................................
Phillips PM2.0×10.0 screw ...................................................................................................
106
108
109
110
111
112
113
8 Backup and recovery in Windows Vista
Creating recovery discs ........................................................................................................
Backing up your information ..................................................................................................
When to back up ..................................................................................................
Backup suggestions ...............................................................................................
Backing up specific files or folders ..........................................................................
Backing up the entire hard drive .............................................................................
Creating recovery points ........................................................................................
Scheduling backups ..............................................................................................
Performing a recovery ..........................................................................................................
Performing a recovery from the recovery discs ..........................................................
Performing a recovery from the hard drive ...............................................................
Initiating a recovery in Windows ..............................................................
Initiating a recovery from the hard drive recovery partition ..........................
114
115
115
115
116
116
117
117
118
118
118
119
119
9 Backup and recovery in Windows XP
Creating recovery discs ........................................................................................................
Backing up your information ..................................................................................................
When to back up ..................................................................................................
Backup suggestions ...............................................................................................
Backing up specific files or folders ..........................................................................
Backing up the entire hard drive .............................................................................
Creating recovery points ........................................................................................
Scheduling backups ..............................................................................................
Performing a recovery ..........................................................................................................
Performing a recovery from the recovery discs ..........................................................
Performing a recovery from the hard drive ...............................................................
Initiating a recovery in Windows ..............................................................
Initiating a recovery from the hard drive recovery partition ..........................
120
121
121
121
122
122
123
123
124
124
124
125
125
10 Connector pin assignments
Audio-out (headphone) .........................................................................................................
Audio-in (microphone) ..........................................................................................................
External monitor ...................................................................................................................
RJ-11 (modem) .....................................................................................................................
RJ-45 (network) ....................................................................................................................
Universal Serial Bus ..............................................................................................................
126
126
127
128
128
129
11 Power cord set requirements
Requirements for all countries and regions ............................................................................... 130
Requirements for specific countries and regions ....................................................................... 131
vii
12 Recycling
Battery ................................................................................................................................ 132
Display ............................................................................................................................... 132
Index ............................................................................................................................... 138
viii
1
Product description
Category
Description
Branding
●
Long name: HP Compaq 2510p Notebook PC
●
Short name: HP Compaq 2510p
●
Logo badge: Compaq 2510p
Processors
Chipsets
Intel® Core™ Duo processors:
●
U7600 1.20-GHz processor with 533-MHz Front Side Bus (FSB) and 2-MB L2 cache
●
U7500 1.06-GHz processor with 533-MHz FSB and 2-MB L2 cache
●
Northbridge: Intel Crestline GM
●
Southbridge: Intel ICH8-M enhanced
Graphics
Intel Crestline Graphics, Unified Memory Architecture (UMA), integrated with shared video memory, up
to 384-MB shared memory
Panels
●
12.1 WXGA (1280 × 800), configured with 3 WLAN antennas and 2 WWAN antennas
●
Supports privacy filter
●
One SODIMM slot, customer accessible/upgradable
●
PC2-5300, 667-MHz, DDRII
●
Supports single-channel memory
●
Supported configurations:
Memory
Hard drives
◦
4096-MB total system memory (4096 MB × 1)
◦
2048-MB total system memory (2048 × 1)
◦
1024-MB total system memory (1024 MB × 1)
◦
512-MB total system memory (512 MB × 1)
●
Supports all 1.8-inch hard drives
●
Parallel ATA
●
The following hard drives are available:
◦
100-GB, 4200-rpm
◦
80-GB, 4200-rpm
◦
60-GB, 4200-rpm
1
Category
Description
Optical drives
●
9.5-mm tray load
●
Parallel ATA
●
Removable with two screws
●
Supports the following optical formats:
●
◦
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive
◦
DVD/CD-RW Combo Drive
◦
DVD-ROM Drive
Supports no-optical-drive option with blank bezel
Diskette drive
Supports an external Universal Serial Bus (USB) diskette drive only
Audio
●
Azalia ADI1981HD
●
Single speaker
●
Integrated monoaural microphone
●
Headphone and microphone jacks
●
56K, v.92, data/fax modem (MDC1.5)
●
Modem cable included in Brazil, the Czech Republic, France, Greece, Hungary, Israel, Latin
America, Poland, Russia, Saudi Arabia, Slovakia, Slovenia, South Africa, Turkey, and the United
Kingdom.
●
Intel 10/100/1000 Ethernet
●
Network interface card (NIC) power-down
●
S4/S5 wake on LAN (on AC power only)
Modem
Ethernet
Wireless
Integrated wireless options by way of wireless module
Wireless local area network (WLAN) options:
●
Broadcom 802.11a/b/g
●
Broadcom 802.11b/g
●
Intel 802.11a/b/g/n with iAMT support
●
Intel 802.11a/b/g with iAMT support
●
Intel 802.11b/g
●
Three 2.4-/5.0-GHzWLAN antennas built into display panel
●
Supports no-WLAN option
Wireless wide area network (WWAN) options:
2
●
Evolution-data optimized (EVDO-A) WWAN module
●
High-speed downlink packet access (HSPDA) WWAN module
●
Subscriber identity module (SIM)
●
Two 5-band antennas built into display panel
Chapter 1 Product description
Category
Description
Wireless personal area network (WPAN) options:
External media
card
Ports
●
Bluetooth® module
●
Supports no-WPAN option
●
One Type I/II PC Card slot
●
16-bit PCMCIA and 32-bit CardBus
●
Integrated SD flash media slot (SD/MMC support)
●
1394a port
●
Docking connector
●
Headphone connector
●
Microphone connector
●
Primary battery connector
●
RJ-11 modem port
●
RJ-45 Ethernet port
●
Smart AC adapter connector
●
USB ports (2)
●
VGA port (Dsub 15-pin) supporting 1600 × 1200 external resolution @ 75 Hz, hot plug/unplug,
and auto detect
Docking
Docking support
Keyboard/
pointing devices
●
Spill-resistant keyboard with embedded numeric keypad, TouchPad, pointing stick, and fingerprint
reader
●
Full-size, 19.05-mm pitch, 4.5-mm height keyboard
●
One-way scrolling (vertical)
●
Windows Vista™ hardware Start button
●
Durable key caps
Power
requirements
Primary batteries:
●
9-cell, 83-Wh, Li-ion battery with fuel gauge
●
6-cell, 55-Wh, Li-ion battery with fuel gauge
●
3-cell, 28-Wh Li-ion battery
65-watt AC adapter with localized cable plug support and 3-wire plug
Security
●
Support for Kensington security lock
●
Optional integrated active smart card reader (installed in the PC Card slot)
●
Integrated Infineon TPM 1.2 chip (soldered to PCB)
●
Integrated USB-based fingerprint reader
3
Category
Description
Operating system
Preinstalled:
●
Windows Vista Home Basic (32-bit)
●
Windows Vista Business (32- and 64-bit)
●
Windows® XP Professional
●
FreeDOS
Certified: Linux
Serviceability
4
End-user replaceable parts:
●
AC adapter
●
Battery
●
Bluetooth module
●
Hard drive
●
Memory module
●
Optical drive
●
Power cord
●
RTC battery
●
SIM
●
WLAN module
●
WWAN module
Chapter 1 Product description
2
External component identification
Display components
Item
Component
Function
(1)
Display release latch
Opens the computer.
(2)
Internal display switch
Turns off the display if the display is closed while the
computer is on.
(3)
Internal microphone
Records sound.
(4)
Ambient light sensor
When activated, the sensor automatically adjusts the display
brightness based on the surrounding lighting conditions.
Display components
5
Top components
Buttons and fingerprint reader
Item
Component
Function
(1)
Power button
●
When the computer is off, press the button to turn on
the computer.
●
When the computer is on, press the button to shut down
the computer.
●
When the computer is in the Sleep state (Windows
Vista) or in Standby (Windows XP), press the button
briefly to exit the Sleep state or Standby.
●
When the computer is in Hibernation, press the button
briefly to exit Hibernation.
If the computer has stopped responding and Windows®
shutdown procedures are ineffective, press and hold the
power button for at least 5 seconds to turn off the computer.
To learn more about power settings, follow these steps:
●
In Windows Vista, select Start > Control Panel >
System and Maintenance > Power Options.
●
In Windows XP, select Start > Control Panel >
Performance and Maintenance > Power
Options.
(2)
Info button
Launches Info Center, which enables you to open various
software solutions.
(3)
Wireless button
Turns the wireless feature on or off, but does not establish a
wireless connection.
NOTE: A wireless network must be set up in order to
establish a wireless connection.
(4)
6
Presentation button
Chapter 2 External component identification
Starts the presentation feature.
Item
Component
Function
(5)
TouchPad on/off button
Turns the TouchPad on and off.
(6)
Volume mute button (select models only)
Mutes and restores speaker sound.
(7)
Volume scroll zone
Adjusts speaker volume. Slide your finger to the left to
decrease volume and to the right to increase volume.
(8)
HP Fingerprint Sensor
Allows a fingerprint logon to Windows, instead of a
password logon.
Keys
NOTE: Your computer may look slightly different from the illustration in this section.
Item
Component
Function
(1)
esc key
Displays system information when pressed in combination
with the fn key.
(2)
fn key
Executes frequently used system functions when pressed in
combination with a function key or the esc key.
(3)
Windows logo key
Displays the Windows Start menu.
(4)
Windows applications key
Displays a shortcut menu for items beneath the pointer.
(5)
Embedded numeric keypad keys
Can be used like the keys on an external numeric keypad.
(6)
Function keys
Execute frequently used system functions when pressed in
combination with the fn key.
Top components
7
Lights
Item
Component
Function
(1)
Wireless lights (2)*
●
On: An integrated wireless device, such as a wireless
local area network (WLAN) device, the HP Broadband
Wireless Module, and/or a Bluetooth® device, is on.
●
Off: All wireless devices are off.
●
On: The computer is on.
●
Blinking: The computer is in Standby.
●
Blinking rapidly: An AC adapter with a higher power
rating should be connected.
●
Off: The computer is off or in Hibernation.
●
Amber: A battery is charging.
●
Green: A battery is close to full charge capacity.
●
Blinking amber: A battery that is the only available
power source has reached a low battery level. When
the battery reaches a critical battery level, the battery
light begins blinking rapidly.
●
Off: If the computer is plugged into an external power
source, the light turns off when all batteries in the
computer are fully charged. If the computer is not
plugged into an external power source, the light stays
off until the battery reaches a low battery level.
●
Blinking green: The hard drive or optical drive is being
accessed.
●
Amber: HP 3D DriveGuard has temporarily parked the
internal hard drive.
(2)
(3)
(4)
(5)
8
Power lights (2)†
Battery light
Drive light
Caps lock light
Chapter 2 External component identification
On: Caps lock is on.
Item
Component
Function
(6)
Num lock light
On: Num lock is on or the embedded numeric keypad is
enabled.
(7)
Volume mute light
●
Off: Computer sound is on.
●
On: Computer sound is off.
(8)
Volume down light
On: The volume scroll zone is being used to decrease
speaker volume.
(9)
Volume up light
On: The volume scroll zone is being used to increase
speaker volume.
*The 2 wireless lights display the same information. The light on the wireless button is visible only when the computer is open.
The wireless light on the front of the computer is visible whether the computer is open or closed.
†The 2 power lights display the same information. The light on the power button is visible only when the computer is open. The
power light on the front of the computer is visible whether the computer is open or closed.
Top components
9
Pointing devices
Item
Component
Function
(1)
TouchPad on/off button
Turns the TouchPad on and off.
(2)
Pointing stick
Moves the pointer and selects or activates items on the
screen.
(3)
Left pointing stick button*
Functions like the left button on an external mouse.
(4)
TouchPad*
Moves the pointer and selects or activates items on the
screen.
(5)
Left TouchPad button*
Functions like the left button on an external mouse.
(6)
Right TouchPad button*
Functions like the right button on an external mouse.
(7)
TouchPad scroll zone
Scrolls up or down.
(8)
Right pointing stick button*
Functions like the right button on an external mouse.
*This table describes factory settings. View or change pointing device preferences as follows:
10
●
In Windows Vista, select Start > Control Panel > Hardware and Sound > Mouse.
●
In Windows XP, select Start > Control Panel > Printers and Other Hardware > Mouse.
Chapter 2 External component identification
Front components
Item
Component
Function
(1)
Wireless light
●
On: An integrated wireless device, such as a WLAN
device, the HP Broadband Wireless Module, and/or a
Bluetooth device, is turned on.
●
Off: All wireless devices are turned off.
●
On: The computer is on.
●
Blinking: The computer is in the Sleep state (Windows
Vista) or in Standby (Windows XP).
●
Blinking rapidly: An AC adapter with a higher power
rating should be connected.
●
Off: The computer is off or in Hibernation.
●
Amber: A battery is charging.
●
Green: A battery is close to full charge capacity.
●
Blinking amber: A battery that is the only available
power source has reached a low battery level. When
the battery reaches a critical battery level, the battery
light begins blinking rapidly.
●
Off: If the computer is plugged into an external power
source, the light turns off when all batteries in the
computer are fully charged. If the computer is not
plugged into an external power source, the light stays
off until the battery reaches a low battery level.
●
Blinking green: The hard drive or optical drive is being
accessed.
●
Amber (select models only): HP 3D DriveGuard has
temporarily parked the hard drive.
(2)
(3)
(4)
(5)
Power light
Battery light
Drive light
Bluetooth module (select models only)
Sends and receives Bluetooth device signals.
WARNING! Exposure to Radio Frequency
Radiation. The radiated output power of this device is
below the FCC radio frequency exposure limits.
Nevertheless, the device should be used in such a manner
that the potential for human contact during normal operation
is minimized. To avoid the possibility of exceeding the FCC
radio frequency exposure limits, human proximity to the
antennae should be not less than 20 cm (8 inches) during
normal operation, including when the computer display is
closed.
(6)
Display release latch
Opens the computer.
Front components
11
Left-side components
Item
Component
Function
(1)
Power connector
Connects an AC adapter.
(2)
RJ-11 (modem) jack
Connects a modem cable.
(3)
USB port
Depending on your computer model, the USB port is either
a standard USB port or a powered USB port. A standard
USB port connects an optional USB device. A powered USB
port provides power to an external device if used with a
powered USB cable.
(4)
Vent
Enables airflow to cool internal components.
NOTE: The computer fan starts up automatically to cool
internal components and prevent overheating. It is normal
for the internal fan to cycle on and off during routine
operation.
12
(5)
Optical drive (select models only)
Reads an optical disc.
(6)
Optical drive light
Blinking: The optical drive is being accessed.
Chapter 2 External component identification
Rear components
Item
Component
Function
(1)
RJ-45 (network) jack
Connects a network cable.
(2)
Security cable slot
Attaches an optional security cable to the computer.
NOTE: The security cable is designed to act as a deterrent,
but it may not prevent the computer from being mishandled
or stolen.
Rear components
13
Right-side components
NOTE: Computer features vary depending on model. Refer to one of the following illustrations.
Item
Component
Function
(1)
PC Card slot (select models only)
Supports optional Type I or Type II PC Cards.
(2)
Media Card Reader
Supports the following optional digital card formats: Secure
Digital (SD) Memory Card, MultiMediaCard (MMC).
(3)
1394a port
Connects an optional IEEE 1394 or 1394a device, such as
a camcorder.
(4)
Audio-out (headphone) jack
Produces computer sound when connected to optional
powered stereo speakers, headphones, ear buds, a
headset, or television audio.
(5)
Audio-in (microphone) jack
Connects an optional computer headset microphone, stereo
array microphone, or monaural microphone.
(6)
USB port
Connects an optional USB device.
(7)
External monitor port
Connects an external VGA monitor or projector.
(8)
Vent
Enables airflow to cool internal components.
NOTE: The computer fan starts up automatically to cool
internal components and prevent overheating. It is normal
for the internal fan to cycle on and off during routine
operation.
14
(9)
Docking connector
Connects an optional docking device.
Item
Component
Function
(1)
Smart card reader (select models only)
Supports smart cards and Java™ Cards.
(2)
Media Card Reader
Supports the following optional digital card formats: Secure
Digital (SD) Memory Card, MultiMediaCard (MMC).
(3)
1394a port
Connects an optional IEEE 1394 or 1394a device, such as
a camcorder.
Chapter 2 External component identification
Item
Component
Function
(4)
Audio-out (headphone) jack
Produces computer sound when connected to optional
powered stereo speakers, headphones, ear buds, a
headset, or television audio.
(5)
Audio-in (microphone) jack
Connects an optional computer headset microphone, stereo
array microphone, or monaural microphone.
(6)
USB port
Connects an optional USB device.
(7)
External monitor port
Connects an external VGA monitor or projector.
(8)
Vent
Enables airflow to cool internal components.
NOTE: The computer fan starts up automatically to cool
internal components and prevent overheating. It is normal
for the internal fan to cycle on and off during routine
operation.
(9)
Docking connector
Connects an optional docking device.
Right-side components
15
Bottom components
Item
Component
Function
(1)
Speaker
Produces computer sound.
(2)
Memory module/WLAN module compartment
Contains a memory module slot and a WLAN module slot.
CAUTION: To prevent an unresponsive system, replace
the wireless module only with a wireless module authorized
for use in the computer by the governmental agency that
regulates wireless devices in your country or region. If you
replace the module and then receive a warning message,
remove the module to restore computer functionality, and
then contact technical support through Help and Support.
(3)
Hard drive bay
Holds the hard drive.
(4)
Vents (6)
Enable airflow to cool internal components.
NOTE: The computer fan starts up automatically to cool
internal components and prevent overheating. It is normal
for the internal fan to cycle on and off during routine
operation.
(5)
Battery release latches (2)
Release the battery from the battery bay.
(6)
Battery bay
Holds the battery.
(7)
SIM slot
Contains a subscriber identity module (SIM). The SIM slot is
located inside the battery bay.
(8)
WWAN module compartment
Contains a WWAN module slot.
CAUTION: To prevent an unresponsive system, replace
the wireless module only with a wireless module authorized
for use in the computer by the governmental agency that
regulates wireless devices in your country or region. If you
replace the module and then receive a warning message,
remove the module to restore computer functionality, and
then contact technical support through Help and Support.
16
Chapter 2 External component identification
Item
Component
Function
(9)
Business-card holder
Holds a standard-sized business card.
(10)
Bluetooth module compartment (select models only)
Contains a Bluetooth device.
Bottom components
17
3
Illustrated parts catalog
Serial number location
When ordering parts or requesting information, provide the computer serial number and model number
located on the bottom of the computer.
18
Chapter 3 Illustrated parts catalog
Computer major components
Item
Description
Spare part
number
(1)
12.1-inch, WXGA display assembly with AntiGlare (includes wireless antenna
transceivers and cables, and microphone and cable)
451741-001
Display internal components:
Display bezel
451733-001
Computer major components
19
Item
20
Description
Spare part
number
Display panel cable
451735-001
Display enclosure (includes WLAN and WWAN antenna transceivers and cables)
451736-001
Display hinges
451734-001
Display lid switch module
451724-001
Display Screw Kit
451737-001
(2)
Switch cover (includes LED board and cable)
451717-001
(3)
Keyboards (include pointing stick and pointing stick cable)
Belgium
451748-A41
Brazil
451748-201
The Czech Republic
451748-221
Denmark
451748-081
France
451748-051
French Canada
451748-121
Germany
451748-041
Greece
451748-151
Hungary
451748-211
Iceland
451748-DD1
The Netherlands and Europe
451748-021
Israel
451748-BB1
Italy
451748-061
Japan
451748-291
Latin America
451748-161
Norway
451748-091
Portugal
451748-131
Russia
451748-251
Saudi Arabia
451748-171
Slovakia
451748-231
Slovenia
451748-BA1
South Korea
451748-AD1
Spain
451748-071
Sweden and Finland
451748-B71
Switzerland
451748-111
Taiwan
451748-AB1
Thailand
451748-281
Chapter 3 Illustrated parts catalog
Item
Description
Spare part
number
Turkey
451748-141
The United Kingdom
451748-031
The United States
451748-001
(4)
Top cover (includes TouchPad and fingerprint reader board)
451723-001
(5)
PC Card assembly
451742-001
Plastics Kit (see Plastics Kit on page 25 for more Plastics Kit spare part information):
451743-001
(6a)
PC Card slot bezel
(6b)
Memory module/WLAN module compartment cover
(6c)
Bluetooth module compartment cover
(6d)
Hard drive cover
(6e)
WWAN module compartment cover
(7)
System boards (include thermal material and alcohol pad)
Equipped with Intel Core Duo U7600 (1.20-GHz) processor (533-MHz FSB and 2-MB L2 cache) 451720-001
Equipped with Intel Core Duo U7500 (1.06-GHz) processor (533-MHz FSB and 2-MB L2 cache) 451719-001
(8)
Speaker assembly
(9)
Modem modules (include modem module cable)
(10)
451747-001
For use in all countries and regions except Australia and New Zealand
443899-001
For use only in Australia and New Zealand
443899-011
Optical drives (include bezel)
DVD±RW and CD-RW Double-Layer Combo Drive
451727-001
DVD/CD-RW Combo Drive
451725-001
DVD-ROM Drive
451726-001
(11)
Fan/heat sink assembly (includes thermal material)
451731-001
(12)
Base enclosure (includes front LED board, front LED board cable, and rubber feet)
451712-001
Rubber Kit (not illustrated; includes 5 rubber feet and 2 base enclosure screw covers)
451744-001
(13)
(14)
Batteries
9-cell, 83-Wh Li-ion
451715-001
6-cell, 55-Wh Li-ion
451714-001
3-cell, 28-Wh Li-ion
451713-001
WLAN modules
802.11a/b/g/n Broadcom WLAN modules:
●
For use in Canada, the Cayman Islands, Guam, Puerto Rico, the U.S. Virgin Islands, and
the United States
441530-001
Computer major components
21
Item
Description
Spare part
number
●
For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua & Barbuda,
Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain,
Bangladesh, Barbados, Belgium, Belize, Benin, Bermuda, Bolivia, Bosnia & Herzegovina,
Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi,
Cameroon, Cape Verde, the Cayman Islands, the Central African Republic, Chad, Chile,
Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic,
Denmark, Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El
Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French
Guiana, Gabon, Gambia Georgia, Germany, Ghana, Gibraltar, Greece, Grenada,
Guadeloupe, Guam, Guatemala, Guinea, Guinea-Bissa, Guyana, Haiti, Honduras, Hong
Kong, Hungary, Iceland, India, Ireland, Italy, the Ivory Coast, Jamaica, Jordan, Kenya,
Kiribati, Kyrgyzstan, Laos, Latvia, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg,
Macedonia, Madagascar, Malawi, the Maldives, Mali, Malta, the Marshall Islands,
Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia,
Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Netherlands, New
Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau, Panama, Papua
New Guinea, Paraguay, the People's Republic of China, Peru, the Philippines, Poland,
Portugal, Puerto Rico, the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San
Marino, Sao Tome & Principe, Saudi Arabia, Senegal, Serbia and Montenegro, the
Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia,
South Africa, Spain, Sri Lanka, St. Kitts & Nevis, St. Lucia, St. Vincent & Grenada,
Suriname, Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Togo, Tonga,
Trinidad & Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, the United Arab
Emirates, the United Kingdom, Uruguay, Uzbekistan, Venezuela, Vietnam, Yemen, Zaire,
Zambia, and Zimbabwe
441530-002
●
For use in Japan
441530-291
802.11a/b/g/n Intel WLAN modules:
●
For use in Antigua and Barbuda, Argentina, Aruba, the Bahamas, Barbados, Bermuda,
Brunei, Canada, the Cayman Islands, Chile, Colombia, Costa Rica, the Dominican
Republic, Ecuador, El Salvador, Guam, Guatemala, Haiti, Honduras, Hong Kong, India,
Indonesia, Malaysia, Mexico, Panama, Paraguay, Peru, Saudi Arabia, Taiwan, Uruguay,
the United States, Venezuela, and Vietnam
441086-001
●
For use in Austria, Azerbaijan, Bahrain, Belgium, Brazil, Bulgaria, Croatia, Cyprus, the
Czech Republic, Denmark, Egypt, Estonia, Finland, France, Georgia, Germany, Greece,
Hungary, Iceland, Ireland, Israel, Italy, Latvia, Lebanon, Liechtenstein, Lithuania,
Luxembourg, Malta, Monaco, the Netherlands, Norway, Oman, the Philippines, Poland,
Portugal, Qatar, Romania, Russia, Serbia and Montenegro, Singapore, Slovakia,
Slovenia, South Africa, Spain, Sri Lanka, Sweden, Switzerland, Turkey, Ukraine, the
United Kingdom, and Uzbekistan
441086-002
●
For use in Australia, New Zealand, Pakistan, the People's Republic of China, and South
Korea
441086-003
●
For use in Japan
441086-291
802.11a/b/g Broadcom WLAN modules:
22
●
For use in Canada, the Cayman Islands, Guam, Puerto Rico, the U.S. Virgin Islands, and
the United States
441075-001
●
For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda,
Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain,
Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia
and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina
Faso, Burundi, Cameroon, Cape Verde, the Central African Republic, Chad, Chile,
Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic,
Denmark, Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El
Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French
Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada,
441075-002
Chapter 3 Illustrated parts catalog
Item
Description
Spare part
number
Guadeloupe, Guatemala, Guinea, Guinea-Bissa, Guyana, Haiti, Honduras, Hong Kong,
Hungary, Iceland, India, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Jordan,
Kazakhstan, Kenya, Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia,
Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the
Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico,
Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru,
Nepal, the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria,
Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay, the People's
Republic of China, Peru, the Philippines, Poland, Portugal, the Republic of Moldova,
Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome & Principe, Saudi Arabia,
Senegal, Serbia and Montenegro, the Seychelles, Sierra Leone, Singapore, Slovakia,
Slovenia, the Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St.
Kitts & Nevis, St. Lucia, St. Vincent & Grenada, Suriname, Swaziland, Sweden,
Switzerland, Taiwan, Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia,
Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, the United Arab Emirates, the United
Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia,
and Zimbabwe
●
441075-291
For use in Japan
802.11a/b/g Intel WLAN modules:
●
For use in Antigua & Barbuda, Argentina, Aruba, the Bahamas, Barbados, Bermuda,
Brunei, Canada, the Cayman Islands, Chile, Colombia, Costa Rica, the Dominican
Republic, Ecuador, El Salvador, Guam, Guatemala, Haiti, Honduras, Hong Kong, India,
Indonesia, Malaysia, Mexico, Panama, Paraguay, Peru, Saudi Arabia, Taiwan, the United
States, Uruguay, Venezuela, and Vietnam
441082-001
●
For use in Austria, Azerbaijan, Bahrain, Belgium, Brazil, Bulgaria, Croatia, Cyprus, the
Czech Republic, Denmark, Egypt, Estonia, Finland, France, Georgia, Germany, Greece,
Hungary, Iceland, Ireland, Israel, Italy, Latvia, Lebanon, Liechtenstein, Lithuania,
Luxembourg, Malta, Monaco, the Netherlands, Norway, Oman, the Philippines, Poland,
Portugal, Qatar, Romania, Russia, Serbia and Montenegro, Singapore, Slovakia,
Slovenia, South Africa, Spain, Sri Lanka, Sweden, Switzerland, Turkey, Ukraine, the
United Kingdom, and Uzbekistan
441082-002
●
For use in Australia, New Zealand, Pakistan, the People's Republic of China, and South
Korea
441082-003
●
For use in Japan
441082-291
802.11b/g Broadcom WLAN modules:
●
For use in Canada, the Cayman Islands, Guam, Puerto Rico, the U.S. Virgin Islands, and
the United States
441090-001
●
For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua & Barbuda,
Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain,
Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia
& Herzegovina Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso,
Burundi, Cambodia, Cameroon, Cape Verde, the Central African Republic, Chad, Chile,
Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic,
Denmark, Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El
Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French
Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada,
Guadeloupe, Guatemala, Guinea, Guinea-Bissa, Guyana, Haiti, Honduras, Hong Kong,
Hungary, Iceland, India, Indonesia, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Jordan,
Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia,
Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the
Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico,
Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru,
Nepal, the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria,
Norway, Oman, Palau, Panama, Papua New Guinea, Paraguay, the People's Republic
441090-002
Computer major components
23
Item
Description
Spare part
number
of China, Peru, the Philippines, Poland, Portugal, Qatar, the Republic of Moldova,
Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome & Principe, Saudi Arabia,
Senegal, Serbia and Montenegro, the Seychelles, Sierra Leone, Singapore, Slovakia,
Slovenia, the Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St.
Kitts & Nevis, St. Lucia, St. Vincent & Grenada, Suriname, Swaziland, Sweden,
Switzerland, Taiwan, Tajikistan, Tanzania, Thailand, Togo, Tonga, Trinidad & Tobago,
Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, the United Arab Emirates, the
United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire,
Zambia, and Zimbabwe
●
441090-291
802.11b/g Intel WLAN module for use in Thailand
448675-004
(15)
RTC battery
451716-001
(16)
Memory modules (667-MHz, PC2-5300, 1-DIMM)
2048-MB
451739-001
1024-MB
451738-001
512-MB
451740-001
(17)
Bluetooth module (includes Bluetooth module cable)
451721-001
(18)
Hard drives (include hard drive bracket and connector)
(19)
24
For use in Japan
100-GB, 4200-rpm
453504-001
80-GB, 4200-rpm
451730-001
60-GB, 4200-rpm
451729-001
WWAN modules
Verizon EVDO-A WWAN module
451131-001
Cingular HSPDA WWAN module
448673-002
Vodafone HSPDA WWAN module
448672-002
Cable Kit (not illustrated; see Cable Kit on page 26 for more Cable Kit spare part number
information)
451722-001
Smart card reader module (not illustrated)
451746-001
Chapter 3 Illustrated parts catalog
Plastics Kit
Item
Description
Spare part number
Plastics Kit:
451743-001
(1)
Bluetooth module compartment cover (includes 1 captive screw, secured by a C-clip)
(2)
Hard drive cover (includes 2 captive screws, secured by C-clips)
(3)
Memory module/WLAN module compartment cover (includes 2 captive screws, secured by C-clips)
(4)
WWAN module compartment cover (includes 1 captive screw, secured by a C-clip)
(5)
PC Card slot bezel
Plastics Kit
25
Cable Kit
Item
26
Description
Spare part number
Cable Kit:
451722-001
(1)
Audio cable
(2)
Bluetooth module cable
Chapter 3 Illustrated parts catalog
Mass storage devices
Item
Description
(1)
Optical drives (include bezel)
(2)
Spare part number
DVD±RW and CD-RW Double-Layer Combo Drive
451727-001
DVD/CD-RW Combo Drive
451725-001
DVD-ROM Drive
451726-001
Hard drives (include isolator and connector cable)
100-GB, 4200-rpm
453504-001
80-GB, 4200-rpm
451730-001
60-GB, 4200-rpm
451729-001
Miscellaneous parts
Description
Spare part number
65-watt AC adapter (HP Smart Adapter)
412786-001
HP 2400 Ultra-Light Docking Station
412787-001
HP 2500 Ultra-Light Docking Station
455157-001
External MultiBay II
366143-001
External MultiBay II power cable and stand
366144-001
HP Extended Life Battery
367456-001
Label Kit
451732-001
MultiBay 8X DVD-ROM Drive
373314-001
Mass storage devices
27
Description
Spare part number
MultiBay 24X DVD/CD-RW Combo Drive
373315-001
Nylon carrying case
325814-001
USB 1.1 diskette drive
359118-001
Power cords:
28
For use in Argentina
394279-D01
For use in Australia
394279-011
For use in Brazil
394279-201
For use in Denmark
394279-081
For use in Europe, the Middle East, and Africa
394279-021
For use in Israel
394279-BB1
For use in India
394279-D61
For use in Italy
394279-061
For use in Japan
394279-291
For use in the People's Republic of China
394279-AA1
For use in South Korea
394279-AD1
For use in Switzerland
394279-111
For use in Taiwan
394279-AB1
For use in the United Kingdom
394279-031
For use the United States
394279-001
Screw Kit
451745-001
●
Phillips PM2.5×4.0 screw
●
Phillips PM2.0×10.0 screw
●
Phillips PM2.0×5.0 captive screw
●
Phillips PM2.0×5.0 screw
●
Phillips PM2.0×4.0 screw
●
Phillips PM2.0×3.0 screw
●
Phillips PM2.0×2.0 broad-head screw
●
Phillips PM2.0×2.0 screw
●
Phillips PM1.5×3.0 screw
●
Torx T8M2.5×7.0 screw
●
Torx T8M2.5×4.0 screw
●
Torx T6M2.0×5.0 screw
Chapter 3 Illustrated parts catalog
Sequential part number listing
Spare part
number
Description
394279-001
3-wire power cord for use in the United States
394279-011
3-wire power cord for use in Australia
394279-021
3-wire power cord for use in Europe
394279-031
3-wire power cord for use in the United Kingdom
394279-061
3-wire power cord for use in Italy
394279-081
3-wire power cord for use in Denmark
394279-111
3-wire power cord for use in Switzerland
394279-201
3-wire power cord for use in Brazil
394279-291
3-wire power cord for use in Japan
394279-AA1
3-wire power cord for use in the People's Republic of China
394279-AB1
3-wire power cord for use in Taiwan
394279-AD1
3-wire power cord for use in South Korea
394279-BB1
3-wire power cord for use in Israel
394279-D01
3-wire power cord for use in Argentina
394279-D61
3-wire power cord for use in India
412786-001
65-watt AC adapter (HP Smart Adapter)
412787-001
HP 2400 Ultra-Light Docking Station
441075-001
802.11a/b/g Broadcom WLAN module for use in Canada, the Cayman Islands, Guam, Puerto Rico, the U.S.
Virgin Islands, and the United States
441075-002
802.11a/b/g Broadcom WLAN module for use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua
and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh,
Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana,
Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon, Cape Verde, the Central
African Republic, Chad, Chile, Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus, the Czech
Republic, Denmark, Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador,
Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia,
Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissa, Guyana,
Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Jordan,
Kazakhstan, Kenya, Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania,
Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta, the Marshall Islands,
Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco,
Mozambique, Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger,
Nigeria, Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay, the People's Republic of
China, Peru, the Philippines, Poland, Portugal, the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San
Marino, Sao Tome & Principe, Saudi Arabia, Senegal, Serbia and Montenegro, the Seychelles, Sierra Leone,
Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St.
Kitts & Nevis, St. Lucia, St. Vincent & Grenada, Suriname, Swaziland, Sweden, Switzerland, Taiwan, Tajikistan,
Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, the
United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire,
Zambia, and Zimbabwe
441075-291
802.11a/b/g Broadcom WLAN module for use in Japan
Sequential part number listing
29
30
Spare part
number
Description
441082-001
802.11a/b/g Intel WLAN module for use in Antigua & Barbuda, Argentina, Aruba, the Bahamas, Barbados,
Bermuda, Brunei, Canada, the Cayman Islands, Chile, Colombia, Costa Rica, the Dominican Republic, Ecuador,
El Salvador, Guam, Guatemala, Haiti, Honduras, Hong Kong, India, Indonesia, Malaysia, Mexico, Panama,
Paraguay, Peru, Saudi Arabia, Taiwan, the United States, Uruguay, Venezuela, and Vietnam
441082-002
802.11a/b/g Intel WLAN module for use in Austria, Azerbaijan, Bahrain, Belgium, Brazil, Bulgaria, Croatia,
Cyprus, the Czech Republic, Denmark, Egypt, Estonia, Finland, France, Georgia, Germany, Greece, Hungary,
Iceland, Ireland, Israel, Italy, Latvia, Lebanon, Liechtenstein, Lithuania, Luxembourg, Malta, Monaco, the
Netherlands, Norway, Oman, the Philippines, Poland, Portugal, Qatar, Romania, Russia, Serbia and
Montenegro, Singapore, Slovakia, Slovenia, South Africa, Spain, Sri Lanka, Sweden, Switzerland, Turkey,
Ukraine, the United Kingdom, and Uzbekistan
441082-003
802.11a/b/g Intel WLAN module for use in Australia, New Zealand, Pakistan, the People's Republic of China,
and South Korea
441082-291
802.11a/b/g Intel WLAN module for use in Japan
441086-001
802.11a/b/g/n Intel WLAN module for use in Antigua and Barbuda, Argentina, Aruba, the Bahamas,
Barbados, Bermuda, Brunei, Canada, the Cayman Islands, Chile, Colombia, Costa Rica, the Dominican
Republic, Ecuador, El Salvador, Guam, Guatemala, Haiti, Honduras, Hong Kong, India, Indonesia, Malaysia,
Mexico, Panama, Paraguay, Peru, Saudi Arabia, Taiwan, Uruguay, the United States, Venezuela, and Vietnam
441086-002
802.11a/b/g/n Intel WLAN module for use in Austria, Azerbaijan, Bahrain, Belgium, Brazil, Bulgaria, Croatia,
Cyprus, the Czech Republic, Denmark, Egypt, Estonia, Finland, France, Georgia, Germany, Greece, Hungary,
Iceland, Ireland, Israel, Italy, Latvia, Lebanon, Liechtenstein, Lithuania, Luxembourg, Malta, Monaco, the
Netherlands, Norway, Oman, the Philippines, Poland, Portugal, Qatar, Romania, Russia, Serbia and
Montenegro, Singapore, Slovakia, Slovenia, South Africa, Spain, Sri Lanka, Sweden, Switzerland, Turkey,
Ukraine, the United Kingdom, and Uzbekistan
441086-003
802.11a/b/g/n Intel WLAN module for use in Australia, New Zealand, Pakistan, the People's Republic of
China, and South Korea
441086-291
802.11a/b/g/n Intel WLAN module for use in Japan
441090-001
802.11b/g Broadcom WLAN module for use in Canada, the Cayman Islands, Guam, Puerto Rico, the U.S.
Virgin Islands, and the United States
441090-002
802.11b/g Broadcom WLAN module for use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua &
Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh,
Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia & Herzegovina Botswana, Brazil,
the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Cape Verde, the
Central African Republic, Chad, Chile, Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus, the Czech
Republic, Denmark, Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador,
Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia,
Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissa, Guyana,
Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Ireland, Israel, Italy, the Ivory Coast, Jamaica,
Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein,
Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta, the Marshall
Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco,
Mozambique, Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger,
Nigeria, Norway, Oman, Palau, Panama, Papua New Guinea, Paraguay, the People's Republic of China, Peru,
the Philippines, Poland, Portugal, Qatar, the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San
Marino, Sao Tome & Principe, Saudi Arabia, Senegal, Serbia and Montenegro, the Seychelles, Sierra Leone,
Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St.
Kitts & Nevis, St. Lucia, St. Vincent & Grenada, Suriname, Swaziland, Sweden, Switzerland, Taiwan, Tajikistan,
Tanzania, Thailand, Togo, Tonga, Trinidad & Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine,
the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen,
Zaire, Zambia, and Zimbabwe
441090-291
802.11b/g Broadcom WLAN module for use in Japan
441530-001
802.11a/b/g/n Broadcom WLAN module for use in Canada, the Cayman Islands, Guam, Puerto Rico, the
U.S. Virgin Islands, and the United States
Chapter 3 Illustrated parts catalog
Spare part
number
Description
441530-002
802.11a/b/g/n Broadcom WLAN module for use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua
& Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh,
Barbados, Belgium, Belize, Benin, Bermuda, Bolivia, Bosnia & Herzegovina, Botswana, Brazil, the British Virgin
Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon, Cape Verde, the Cayman Islands, the Central
African Republic, Chad, Chile, Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus, the Czech
Republic, Denmark, Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador,
Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia Georgia,
Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guam, Guatemala, Guinea, Guinea-Bissa,
Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Ireland, Italy, the Ivory Coast, Jamaica, Jordan,
Kenya, Kiribati, Kyrgyzstan, Laos, Latvia, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia,
Madagascar, Malawi, the Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius,
Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the
Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau, Panama, Papua
New Guinea, Paraguay, the People's Republic of China, Peru, the Philippines, Poland, Portugal, Puerto Rico,
the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome & Principe, Saudi Arabia,
Senegal, Serbia and Montenegro, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon
Islands, Somalia, South Africa, Spain, Sri Lanka, St. Kitts & Nevis, St. Lucia, St. Vincent & Grenada, Suriname,
Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Togo, Tonga, Trinidad & Tobago, Tunisia,
Turkey, Turkmenistan, Tuvalu, Uganda, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan,
Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
441530-291
802.11a/b/g/n Broadcom WLAN module for use in Japan
443899-001
Modem module for use in all countries and regions except Australia and New Zealand (includes modem module
cable)
443899-011
Modem module for use only in Australia and New Zealand (includes modem module cable)
448672-002
Vodafone HSPDA WWAN module
448673-002
Cingular HSPDA WWAN module
448675-004
802.11b/g Intel WLAN module for use in Thailand
451131-001
Verizon EVDO-A WWAN module
451712-001
Base enclosure (includes front LED board, front LED board cable, and rubber feet)
451713-001
3-cell, 28-Wh Li-ion battery
451714-001
6-cell, 55-Wh Li-ion battery
451715-001
9-cell, 83-Wh Li-ion battery
451716-001
RTC battery
451717-001
Switch cover (includes LED board and cable)
451719-001
System board equipped with Intel Core Duo U7600 (1.20-GHz) processor (533-MHz FSB and 2-MB L2 cache;
includes thermal material and alcohol pad)
451720-001
System board equipped with Intel Core Duo U7500 (1.06-GHz) processor (533-MHz FSB and 2-MB L2 cache;
includes thermal material and alcohol pad)
451721-001
Bluetooth module (includes Bluetooth module cable)
451722-001
Cable Kit (see Cable Kit on page 26 for more Cable Kit spare part number information)
451723-001
Top cover (includes TouchPad and fingerprint reader board)
451724-001
Display lid switch module
451725-001
DVD/CD-RW Combo Drive
451726-001
DVD-ROM Drive
Sequential part number listing
31
32
Spare part
number
Description
451727-001
DVD±RW and CD-RW Double-Layer Combo Drive
451729-001
60-GB, 4200-rpm hard drive (includes hard drive bracket and connector)
451730-001
80-GB, 4200-rpm hard drive (includes hard drive bracket and connector)
451731-001
Fan/heat sink assembly (includes thermal material)
451732-001
Label Kit
451733-001
Display bezel
451734-001
Display hinges
451735-001
Display panel cable
451736-001
Display enclosure (includes WLAN and WWAN antenna transceivers and cables)
451737-001
Display Screw Kit
451738-001
1024-MB memory module (667-MHz, PC2-5300, 1-DIMM)
451739-001
2048-MB memory module (667-MHz, PC2-5300, 1-DIMM)
451740-001
512-MB memory module (667-MHz, PC2-5300, 1-DIMM)
451741-001
12.1-inch, WXGA display assembly with AntiGlare (includes wireless antenna transceivers and cables and
microphone and cable)
451742-001
PC Card assembly
451743-001
Plastics Kit (see Plastics Kit on page 25 for more Plastics Kit spare part information):
451744-001
Rubber Kit (includes 5 computer feet and 2 base enclosure screw covers)
451745-001
Screw Kit
451746-001
Smart card reader module
451747-001
Speaker assembly
451748-001
Keyboard for use in the United States
451748-021
Keyboard for use in the Netherlands and Europe
451748-031
Keyboard for use in the United Kingdom
451748-041
Keyboard for use in Germany
451748-051
Keyboard for use in France
451748-061
Keyboard for use in Italy
451748-071
Keyboard for use in Spain
451748-081
Keyboard for use in Denmark
451748-091
Keyboard for use in Norway
451748-111
Keyboard for use in Switzerland
451748-121
Keyboard for use in French Canada
451748-131
Keyboard for use in Portugal
451748-141
Keyboard for use in Turkey
Chapter 3 Illustrated parts catalog
Spare part
number
Description
451748-151
Keyboard for use in Greece
451748-161
Keyboard for use in Latin America
451748-171
Keyboard for use in Saudi Arabia
451748-201
Keyboard for use in Brazil
451748-211
Keyboard for use in Hungary
451748-221
Keyboard for use in the Czech Republic
451748-231
Keyboard for use in Slovakia
451748-251
Keyboard for use in Russia
451748-281
Keyboard for use in Thailand
451748-291
Keyboard for use in Japan
451748-A41
Keyboard for use in Belgium
451748-AB1
Keyboard for use in Taiwan
451748-AD1
Keyboard for use in South Korea
451748-B71
Keyboard for use in Sweden and Finland
451748-BA1
Keyboard for use in Slovenia
451748-BB1
Keyboard for use in Israel
451748-DD1
Keyboard for use in Iceland
453504-001
100-GB, 4200-rpm hard drive (includes hard drive bracket and connector)
455157-001
HP 2500 Ultra-Light Docking Station
Sequential part number listing
33
4
Removal and replacement
procedures
Preliminary replacement requirements
Tools required
You will need the following tools to complete the removal and replacement procedures:
●
Flat-bladed screwdriver
●
Magnetic screwdriver
●
Phillips P0 and P1 screwdrivers
●
Torx T8 screwdriver
Service considerations
The following sections include some of the considerations that you must keep in mind during disassembly
and assembly procedures.
NOTE: As you remove each subassembly from the computer, place the subassembly (and all
accompanying screws) away from the work area to prevent damage.
Plastic parts
Using excessive force during disassembly and reassembly can damage plastic parts. Use care when
handling the plastic parts. Apply pressure only at the points designated in the maintenance instructions.
34
Chapter 4 Removal and replacement procedures
Cables and connectors
CAUTION: When servicing the computer, be sure that cables are placed in their proper locations
during the reassembly process. Improper cable placement can damage the computer.
Cables must be handled with extreme care to avoid damage. Apply only the tension required to unseat
or seat the cables during removal and insertion. Handle cables by the connector whenever possible. In
all cases, avoid bending, twisting, or tearing cables. Be sure that cables are routed in such a way that
they cannot be caught or snagged by parts being removed or replaced. Handle flex cables with extreme
care; these cables tear easily.
Drive handling
CAUTION: Drives are fragile components that must be handled with care. To prevent damage to the
computer, damage to a drive, or loss of information, observe these precautions:
Before removing or inserting a hard drive, shut down the computer. If you are unsure whether the computer
is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
Before handling a drive, be sure that you are discharged of static electricity. While handling a drive,
avoid touching the connector.
Before removing a diskette drive or optical drive, be sure that a diskette or disc is not in the drive and be
sure that the optical drive tray is closed.
Handle drives on surfaces covered with at least one inch of shock-proof foam.
Avoid dropping drives from any height onto any surface.
After removing a hard drive, an optical drive, or a diskette drive, place it in a static-proof bag.
Avoid exposing a hard drive to products that have magnetic fields, such as monitors or speakers.
Avoid exposing a drive to temperature extremes or liquids.
If a drive must be mailed, place the drive in a bubble pack mailer or other suitable form of protective
packaging and label the package “FRAGILE.”
Preliminary replacement requirements
35
Grounding guidelines
Electrostatic discharge damage
Electronic components are sensitive to electrostatic discharge (ESD). Circuitry design and structure
determine the degree of sensitivity. Networks built into many integrated circuits provide some protection,
but in many cases, ESD contains enough power to alter device parameters or melt silicon junctions.
A discharge of static electricity from a finger or other conductor can destroy static-sensitive devices or
microcircuitry. Even if the spark is neither felt nor heard, damage may have occurred.
An electronic device exposed to ESD may not be affected at all and can work perfectly throughout a
normal cycle. Or the device may function normally for a while, then degrade in the internal layers,
reducing its life expectancy.
CAUTION: To prevent damage to the computer when you are removing or installing internal
components, observe these precautions:
Keep components in their electrostatic-safe containers until you area ready to install them.
Use nonmagnetic tools.
Before touching an electronic component, discharge static electricity by using the guidelines described in
this section.
Avoid touching pins, leads, and circuitry. Handle electronic components as little as possible.
If you remove a component, place it in an electrostatic-safe container.
The following table shows how humidity affects the electrostatic voltage levels generated by different
activities.
CAUTION: A product can be degraded by as little as 700 V.
Typical electrostatic voltage levels
Relative humidity
Event
36
10%
40%
55%
Walking across carpet
35,000 V
15,000 V
7,500 V
Walking across vinyl floor
12,000 V
5,000 V
3,000 V
Motions of bench worker
6,000 V
800 V
400 V
Removing DIPS from plastic tube
2,000 V
700 V
400 V
Removing DIPS from vinyl tray
11,500 V
4,000 V
2,000 V
Removing DIPS from Styrofoam
14,500 V
5,000 V
3,500 V
Removing bubble pack from PCB
26,500 V
20,000 V
7,000 V
Packing PCBs in foam-lined box
21,000 V
11,000 V
5,000 V
Chapter 4 Removal and replacement procedures
Packaging and transporting guidelines
Follow these grounding guidelines when packaging and transporting equipment:
●
To avoid hand contact, transport products in static-safe tubes, bags, or boxes.
●
Protect ESD-sensitive parts and assemblies with conductive or approved containers or packaging.
●
Keep ESD-sensitive parts in their containers until the parts arrive at static-free workstations.
●
Place items on a grounded surface before removing items from their containers.
●
Always be properly grounded when touching a component or assembly.
●
Store reusable ESD-sensitive parts from assemblies in protective packaging or nonconductive foam.
●
Use transporters and conveyors made of antistatic belts and roller bushings. Be sure that mechanized
equipment used for moving materials is wired to ground and that proper materials are selected to
avoid static charging. When grounding is not possible, use an ionizer to dissipate electric charges.
Workstation guidelines
Follow these grounding workstation guidelines:
●
Cover the workstation with approved static-shielding material.
●
Use a wrist strap connected to a properly grounded work surface and use properly grounded tools
and equipment.
●
Use conductive field service tools, such as cutters, screwdrivers, and vacuums.
●
When fixtures must directly contact dissipative surfaces, use fixtures made only of static-safe
materials.
●
Keep the work area free of nonconductive materials, such as ordinary plastic assembly aids and
Styrofoam.
●
Handle ESD-sensitive components, parts, and assemblies by the case or PCM laminate. Handle these
items only at static-free workstations.
●
Avoid contact with pins, leads, or circuitry.
●
Turn off power and input signals before inserting or removing connectors or test equipment.
Preliminary replacement requirements
37
Equipment guidelines
Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation.
●
When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexible straps
with a minimum of one megohm ±10% resistance in the ground cords. To provide proper ground,
wear a strap snugly against the skin at all times. On grounded mats with banana-plug connectors,
use alligator clips to connect a wrist strap.
●
When standing, use foot straps and a grounded floor mat. Foot straps (heel, toe, or boot straps) can
be used at standing workstations and are compatible with most types of shoes or boots. On
conductive floors or dissipative floor mats, use foot straps on both feet with a minimum of one megohm
resistance between the operator and ground. To be effective, the conductive strips must be worn in
contact with the skin.
The following grounding equipment is recommended to prevent electrostatic damage:
●
Antistatic tape
●
Antistatic smocks, aprons, and sleeve protectors
●
Conductive bins and other assembly or soldering aids
●
Nonconductive foam
●
Conductive tabletop workstations with ground cords of one megohm resistance
●
Static-dissipative tables or floor mats with hard ties to the ground
●
Field service kits
●
Static awareness labels
●
Material-handling packages
●
Nonconductive plastic bags, tubes, or boxes
●
Metal tote boxes
●
Electrostatic voltage levels and protective materials
The following table lists the shielding protection provided by antistatic bags and floor mats.
38
Material
Use
Voltage protection level
Antistatic plastic
Bags
1,500 V
Carbon-loaded plastic
Floor mats
7,500 V
Metallized laminate
Floor mats
5,000 V
Chapter 4 Removal and replacement procedures
Unknown user password
If the computer you are servicing has an unknown user password, follow these steps to clear the password:
NOTE: These steps also clear CMOS.
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 41).
5.
Remove the real-time clock (RTC) battery (see RTC battery on page 47).
6.
Wait approximately 5 minutes.
7.
Replace the RTC battery and reassemble the computer.
8.
Connect AC power to the computer. Do not reinsert any batteries at this time.
9.
Turn on the computer.
All passwords and all CMOS settings have been cleared.
Preliminary replacement requirements
39
Component replacement procedures
This chapter provides removal and replacement procedures.
There are as many as 67 screws, in 12 different sizes, that must be removed, replaced, or loosened when
servicing the computer. Make special note of each screw size and location during removal and
replacement.
Serial number
Report the computer serial number to HP when requesting information or ordering spare parts. The serial
number is located on the bottom of the computer.
Computer feet
The computer feet are adhesive-backed rubber pads. The feet are included in the Rubber Kit, spare part
number 451744-001. There are 5 rubber feet that attach to the base enclosure in the locations illustrated
below.
40
Chapter 4 Removal and replacement procedures
Battery
Description
Spare part number
9-cell, 83-Ah, Li-ion battery
451715-001
6-cell, 55-Ah, Li-ion battery
451714-001
3-cell, 28-Ah, Li-ion battery
451713-001
Before disassembling the computer, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
Remove the battery:
1.
Turn the computer upside down on a flat surface, with the battery bay toward you.
2.
Slide the battery release latches (1) to release the battery.
3.
Remove the battery (2) from the computer.
Install the battery by inserting it into the battery bay until you hear a click.
Component replacement procedures
41
SIM
NOTE: This section applies only to computer models with WWAN capability.
NOTE: If there is a SIM inserted in the SIM slot, it must be removed before disassembling the computer.
Be sure that the SIM is reinserted in the SIM slot after reassembling the computer.
Before removing the SIM, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 41).
Remove the SIM:
1.
Press in on the SIM (1). (The module is partially ejected from the SIM slot.)
2.
Remove the SIM (2) from the SIM slot.
Reverse this procedure to install the SIM.
42
Chapter 4 Removal and replacement procedures
Bluetooth module
Description
Spare part number
Bluetooth (includes Bluetooth module cable)
451721-001
Before removing the Bluetooth module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 41).
Remove the Bluetooth® module:
1.
Position the computer with the front toward you.
2.
Loosen the Phillips PM2.0×5.0 captive screw (1) that secures the Bluetooth module compartment
cover to the computer.
3.
Tilt the cover (2) forward to disengage if from the base enclosure.
4.
Swing the cover (3) up and back to remove it from the base enclosure. The Bluetooth module
compartment cover is included in the Plastics Kit, spare part number 451743-001.
Component replacement procedures
43
5.
Disconnect the Bluetooth module cable from the system board (1) and from the Bluetooth module
(2).
6.
Remove the Phillips PM2.0×5.0 screw (1) that secures the Bluetooth module to the Bluetooth module
compartment cover.
7.
Remove the Bluetooth module (2) from the cover.
Reverse this procedure to reassemble and install the Bluetooth module.
44
Chapter 4 Removal and replacement procedures
Memory module
Description
Spare part number
2048-MB (667-MHz, PC2-5300, 1-DIMM)
451739-001
1024-MB (667-MHz, PC2-5300, 1-DIMM)
451738-001
512-MB (667-MHz, PC2-5300, 1-DIMM)
451740-001
Before removing the memory module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 41).
Remove the memory module:
1.
Position the computer with the rear panel toward you.
2.
Loosen the two Phillips PM2.0×5.0 captive screws (1) that secure the memory module/WLAN
module compartment cover to the computer.
3.
Lift the rear edge of the cover (2), swing it up and forward, and remove the cover. The memory
module/WLAN module compartment cover is included in the Plastics Kit, spare part number
451743-001.
4.
Spread the retaining tabs (1) on each side of the memory module slot to release the memory module.
(The edge of the module opposite the slot rises away from the computer.)
Component replacement procedures
45
5.
Remove the memory module (2) by pulling the module away from the slot at an angle.
NOTE: Memory modules are designed with a notch (3) to prevent incorrect installation into the
memory module slot.
Reverse this procedure to install the memory module.
46
Chapter 4 Removal and replacement procedures
RTC battery
NOTE: Removing the RTC battery and leaving it uninstalled for 5 or more minutes causes all passwords
and CMOS settings to be cleared.
Description
Spare part number
RTC battery
451716-001
Before removing the RTC battery, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 41).
5.
Remove the memory module (see Memory module on page 45).
Remove the RTC battery:
1.
Disconnect the RTC battery cable (1) from the system board.
2.
Release the RTC battery (2) from the clip built into the base enclosure by sliding it forward.
3.
Remove the RTC battery (3).
Reverse this procedure to install the RTC battery.
Component replacement procedures
47
WLAN module
CAUTION: The WLAN module and the WWAN module are not interchangeable.
Description
Spare part number
802.11a/b/g/n Broadcom WLAN modules:
●
For use in Canada, the Cayman Islands, Guam, Puerto Rico, the U.S. Virgin Islands, and the
United States
441530-001
●
For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua & Barbuda, Argentina,
Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados,
Belgium, Belize, Benin, Bermuda, Bolivia, Bosnia & Herzegovina, Botswana, Brazil, the British
Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon, Cape Verde, the Cayman
Islands, the Central African Republic, Chad, Chile, Colombia, Comoros, the Congo, Costa Rica,
Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica, the Dominican Republic,
East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji,
Finland, France, French Guiana, Gabon, Gambia Georgia, Germany, Ghana, Gibraltar,
Greece, Grenada, Guadeloupe, Guam, Guatemala, Guinea, Guinea-Bissa, Guyana, Haiti,
Honduras, Hong Kong, Hungary, Iceland, India, Ireland, Italy, the Ivory Coast, Jamaica, Jordan,
Kenya, Kiribati, Kyrgyzstan, Laos, Latvia, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg,
Macedonia, Madagascar, Malawi, the Maldives, Mali, Malta, the Marshall Islands, Martinique,
Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco,
Mozambique, Namibia, Nauru, Nepal, the Netherlands, New Zealand, Nicaragua, Niger,
Nigeria, Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay, the People's
Republic of China, Peru, the Philippines, Poland, Portugal, Puerto Rico, the Republic of Moldova,
Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome & Principe, Saudi Arabia, Senegal,
Serbia and Montenegro, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the
Solomon Islands, Somalia, South Africa, Spain, Sri Lanka, St. Kitts & Nevis, St. Lucia, St. Vincent
& Grenada, Suriname, Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Togo,
Tonga, Trinidad & Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, the United Arab
Emirates, the United Kingdom, Uruguay, Uzbekistan, Venezuela, Vietnam, Yemen, Zaire,
Zambia, and Zimbabwe
441530-002
●
For use in Japan
441530-291
802.11a/b/g/n Intel WLAN modules:
●
For use in Antigua and Barbuda, Argentina, Aruba, the Bahamas, Barbados, Bermuda, Brunei,
Canada, the Cayman Islands, Chile, Colombia, Costa Rica, the Dominican Republic, Ecuador,
El Salvador, Guam, Guatemala, Haiti, Honduras, Hong Kong, India, Indonesia, Malaysia,
Mexico, Panama, Paraguay, Peru, Saudi Arabia, Taiwan, Uruguay, the United States,
Venezuela, and Vietnam
441086-001
●
For use in Austria, Azerbaijan, Bahrain, Belgium, Brazil, Bulgaria, Croatia, Cyprus, the Czech
Republic, Denmark, Egypt, Estonia, Finland, France, Georgia, Germany, Greece, Hungary,
Iceland, Ireland, Israel, Italy, Latvia, Lebanon, Liechtenstein, Lithuania, Luxembourg, Malta,
Monaco, the Netherlands, Norway, Oman, the Philippines, Poland, Portugal, Qatar, Romania,
Russia, Serbia and Montenegro, Singapore, Slovakia, Slovenia, South Africa, Spain, Sri Lanka,
Sweden, Switzerland, Turkey, Ukraine, the United Kingdom, and Uzbekistan
441086-002
●
For use in Australia, New Zealand, Pakistan, the People's Republic of China, and South Korea
441086-003
●
For use in Japan
441086-291
802.11a/b/g Broadcom WLAN modules:
48
●
For use in Canada, the Cayman Islands, Guam, Puerto Rico, the U.S. Virgin Islands, and the
United States
441075-001
●
For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina,
Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados,
Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana,
Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon, Cape
Verde, the Central African Republic, Chad, Chile, Colombia, Comoros, the Congo, Costa Rica,
441075-002
Chapter 4 Removal and replacement procedures
Description
Spare part number
Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica, the Dominican Republic,
East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji,
Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar,
Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissa, Guyana, Haiti, Honduras,
Hong Kong, Hungary, Iceland, India, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Jordan,
Kazakhstan, Kenya, Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein,
Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali,
Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco,
Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles,
the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau,
Panama, Papua New Guinea, Paraguay, the People's Republic of China, Peru, the Philippines,
Poland, Portugal, the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao
Tome & Principe, Saudi Arabia, Senegal, Serbia and Montenegro, the Seychelles, Sierra Leone,
Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa, South Korea, Spain,
Sri Lanka, St. Kitts & Nevis, St. Lucia, St. Vincent & Grenada, Suriname, Swaziland, Sweden,
Switzerland, Taiwan, Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey,
Turkmenistan, Tuvalu, Uganda, Ukraine, the United Arab Emirates, the United Kingdom,
Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
●
441075-291
For use in Japan
802.11a/b/g Intel WLAN modules:
●
For use in Antigua & Barbuda, Argentina, Aruba, the Bahamas, Barbados, Bermuda, Brunei,
Canada, the Cayman Islands, Chile, Colombia, Costa Rica, the Dominican Republic, Ecuador,
El Salvador, Guam, Guatemala, Haiti, Honduras, Hong Kong, India, Indonesia, Malaysia,
Mexico, Panama, Paraguay, Peru, Saudi Arabia, Taiwan, the United States, Uruguay,
Venezuela, and Vietnam
441082-001
●
For use in Austria, Azerbaijan, Bahrain, Belgium, Brazil, Bulgaria, Croatia, Cyprus, the Czech
Republic, Denmark, Egypt, Estonia, Finland, France, Georgia, Germany, Greece, Hungary,
Iceland, Ireland, Israel, Italy, Latvia, Lebanon, Liechtenstein, Lithuania, Luxembourg, Malta,
Monaco, the Netherlands, Norway, Oman, the Philippines, Poland, Portugal, Qatar, Romania,
Russia, Serbia and Montenegro, Singapore, Slovakia, Slovenia, South Africa, Spain, Sri Lanka,
Sweden, Switzerland, Turkey, Ukraine, the United Kingdom, and Uzbekistan
441082-002
●
For use in Australia, New Zealand, Pakistan, the People's Republic of China, and South Korea
441082-003
●
For use in Japan
441082-291
802.11b/g Broadcom WLAN modules:
●
For use in Canada, the Cayman Islands, Guam, Puerto Rico, the U.S. Virgin Islands, and the
United States
441090-001
●
For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua & Barbuda, Argentina,
Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados,
Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia & Herzegovina Botswana,
Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon,
Cape Verde, the Central African Republic, Chad, Chile, Colombia, Comoros, the Congo, Costa
Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica, the Dominican
Republic, East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia,
Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar,
Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissa, Guyana, Haiti, Honduras,
Hong Kong, Hungary, Iceland, India, Indonesia, Ireland, Israel, Italy, the Ivory Coast, Jamaica,
Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho,
Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the
Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico,
Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru,
Nepal, the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria,
Norway, Oman, Palau, Panama, Papua New Guinea, Paraguay, the People's Republic of China,
Peru, the Philippines, Poland, Portugal, Qatar, the Republic of Moldova, Romania, Russia,
Rwanda, Samoa, San Marino, Sao Tome & Principe, Saudi Arabia, Senegal, Serbia and
Montenegro, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands,
441090-002
Component replacement procedures
49
Description
Spare part number
Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts & Nevis, St. Lucia, St. Vincent &
Grenada, Suriname, Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Thailand,
Togo, Tonga, Trinidad & Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, the
United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam,
Yemen, Zaire, Zambia, and Zimbabwe
●
For use in Japan
802.11b/g Intel WLAN module for use in Thailand
441090-291
448675-004
Before removing the WLAN module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 41).
5.
Remove the memory module/WLAN module compartment cover (see Memory module
on page 45).
Remove the WLAN module:
1.
Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module.
NOTE: The black WLAN antenna cable is connected to the WLAN module “Main” terminal. The
white WLAN antenna cable is connected to the WLAN module “Aux” terminal. If the computer is
equipped with an 802.11a/b/g/n WLAN module, the yellow WLAN antenna cable (2) is
connected to the middle terminal on the WLAN module.
2.
50
Remove the two Phillips PM2.0×3.0 screws (3) that secure the WLAN module to the computer. (The
edge of the module opposite the slot rises away from the computer.)
Chapter 4 Removal and replacement procedures
3.
Remove the WLAN module (1) by pulling the module away from the slot at an angle.
NOTE: WLAN modules are designed with a notch (2) to prevent incorrect installation.
Reverse this procedure to install the WLAN module.
Component replacement procedures
51
Hard drive
Description
Spare part number
100-GB, 4200-rpm hard drive
453504-001
80-GB, 4200-rpm hard drive
451730-001
60-GB, 4200-rpm hard drive
451729-001
Before disassembling the computer, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 41).
Remove the hard drive:
52
1.
Loosen the two Phillips PM2.0×5.0 captive screws (1) that secure the hard drive cover to the
computer.
2.
Lift the front edge of the hard drive cover (2), swing it up and back, and remove the cover. The hard
drive cover is included in the Plastics Kit, spare part number 451743-001.
3.
Loosen the two Phillips PM2.0×5.0 captive screws (1) that secure the hard drive bracket to the
computer.
Chapter 4 Removal and replacement procedures
4.
Remove the hard drive bracket (2).
5.
Loosen the two Phillips PM2.0×5.0 captive screws (1) that secure the hard drive connector to the
system board.
6.
Disconnect the hard drive connector (2) from the system board.
7.
Lift the hard drive (3) straight up to remove it from the hard drive.
Reverse this procedure to install the hard drive.
Component replacement procedures
53
WWAN module
CAUTION: The WWAN module and the WLAN module are not interchangeable.
Description
Spare part number
Verizon EVDO-A WWAN module
451131-001
Cingular HSPDA WWAN module
448673-002
Vodafone HSPDA WWAN module
448672-002
Before removing the WWAN module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 41).
5.
Remove the SIM (see SIM on page 42).
Remove the WWAN module:
1.
Position the computer with the front toward you.
2.
Loosen the Phillips PM2.0×5.0 captive screw (1) that secures the WWAN module compartment
cover to the computer.
3.
Lift the left side of the WWAN module compartment cover (2), swing it up and to the right, and
remove the cover. The WWAN module compartment cover is included in the Plastics Kit, spare part
number 451743-001.
4.
Disconnect the WWAN antenna cables (1) from the terminals on the WWAN module.
NOTE: The red WWAN antenna cable is connected to the WWAN module “Main” terminal. The
blue WWAN antenna cable is connected to the WWAN module “Aux” terminal.
54
Chapter 4 Removal and replacement procedures
5.
Remove the two Phillips PM2.5×4.0 screws (2) that secure the WWAN module to the computer.
(The edge of the module opposite the slot rises away from the computer.)
6.
Remove the WWAN module (1) by pulling the module away from the slot at an angle.
NOTE: WWAN modules are designed with a notch (2) to prevent incorrect installation.
Reverse this procedure to install the WWAN module.
Component replacement procedures
55
Optical drive
Description
Spare part number
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive
451727-001
DVD/CD-RW Combo Drive
451725-001
DVD-ROM Drive
451726-001
Before removing the optical drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 41).
Remove the optical drive:
56
1.
Position the computer with the right side toward you.
2.
Remove the Torx T8M2.5×7.0 screw (1) that secures the optical drive to the computer.
3.
If present, remove the Torx T8M2.5×4.0 security screw (2) that secures the optical drive to the
computer.
4.
Insert a thin tool, such as a paper clip (3), into the disc tray release access. (The optical drive disc
tray is partially ejected from the optical drive.)
5.
Use the disc tray frame to slide the optical drive (4) out of the computer.
6.
If it is necessary to replace the optical drive bracket, position the optical drive with the optical drive
bracket toward you.
Chapter 4 Removal and replacement procedures
7.
Remove the two Phillips PM2.0×3.0 screws (1) that secure the optical drive bracket to the optical
drive.
8.
Remove the optical drive bracket (2).
Reverse this procedure to reassemble and install the optical drive.
Switch cover
Description
Spare part number
Switch cover (includes LED board and cable)
451717-001
Before removing the switch cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 41).
Remove the switch cover:
1.
Turn the computer right-side up, with the front toward you.
2.
Open the computer as far as possible.
Component replacement procedures
57
3.
Release the switch cover by lifting and swinging the hinge cover sections up and forward until the
switch cover rests upside down on the keyboard.
4.
Release the zero insertion force (ZIF) connector (1) to which the LED board cable is attached, and
disconnect the LED board cable (2) from the connector.
5.
Remove the switch cover.
Reverse this procedure to install the switch cover.
58
Chapter 4 Removal and replacement procedures
Keyboard
For use in:
Spare part number
For use in:
Spare part number
Belgium
451748-A41
The Netherlands and Europe
451748-021
Brazil
451748-201
Norway
451748-091
The Czech Republic
451748-221
Portugal
451748-131
Denmark
451748-081
Russia
451748-251
France
451748-051
Saudi Arabia
451748-171
French Canada
451748-121
Slovakia
451748-231
Germany
451748-041
Slovenia
451748-BA1
Greece
451748-151
Spain
451748-071
Hungary
451748-211
Sweden and Finland
451748-B71
Iceland
451748-DD1
Switzerland
451748-111
Israel
451748-BB1
Taiwan
451748-AB1
Italy
451748-061
Thailand
451748-281
Japan
451748-291
Turkey
451748-141
South Korea
451748-AD1
The United Kingdom
451748-031
Latin America
451748-161
The United States
451748-001
Before removing the keyboard, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 41).
5.
Remove the switch cover (see Switch cover on page 57).
Remove the keyboard:
1.
Turn the computer upside down, with the front toward you.
Component replacement procedures
59
60
2.
Remove the six Torx T8M2.5×7.0 screws that secure the keyboard to the computer.
3.
Turn the computer display-side up, with the front toward you.
4.
Open the computer as far as possible.
5.
Lift the rear edge of the keyboard (1) and slide it back until the keyboard cable (2) and pointing
stick cable (3) are accessible.
6.
Release the ZIF connector (1) to which the keyboard cable is attached, and disconnect the keyboard
cable (2) from the system board.
Chapter 4 Removal and replacement procedures
7.
Release the ZIF connector (3) to which the pointing stick cable is attached, and disconnect the
pointing stick cable (4) from the system board.
8.
Remove the keyboard.
9.
If it is necessary to replace the LED board cable, turn the keyboard upside down, with the bottom of
the keyboard toward you.
10. If it is necessary to replace the LED board cable, disconnect the cable (1) from the low insertion force
(LIF) connector (2) to which it is attached, and remove the LED board cable (3). The LED board cable
is included in the Cable Kit, spare part number 451722-001.
Reverse this procedure to install the keyboard.
Component replacement procedures
61
Display assembly
Description
Spare part number
12.1-inch, WXGA display assembly with AntiGlare (includes wireless antenna transceivers and cables
and microphone and cable)
451741-001
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 41).
5.
Disconnect the wireless antenna cables from the WLAN module (see WLAN module on page 48)
and the WWAN module (see WWAN module on page 54).
6.
Remove the following components:
a.
Switch cover (see Switch cover on page 57)
b.
Keyboard (see Keyboard on page 59)
Remove the display assembly:
62
1.
Position the computer with the rear panel toward you and the display in an upright position.
2.
Remove the two Torx T8M2.5×7.0 screws that secure the display assembly to the computer.
3.
Position the computer with the front toward you.
4.
Remove the WWAN antenna cables (1) from the routing channel and clips built into the top cover.
5.
Disconnect the display panel cable (2) from the system board.
Chapter 4 Removal and replacement procedures
6.
Remove the WLAN antenna cables (3) from the routing channel and clips built into the top cover.
7.
Disconnect the microphone cable (4) from the microphone pass-through cable.
8.
Disconnect the display lid switch module cable (1) from the system board.
9.
Remove the two Torx T8M2.5×7.0 screws (2) that secure the display assembly to the computer.
10. Lift the display assembly straight up and remove it (3).
11. If it is necessary to replace the display lid switch module, remove the Phillips PM1.5×3.0 screw
(1) that secures the module to the display assembly left hinge.
12. Rotate the module (2) ¼-turn counterclockwise.
Component replacement procedures
63
13. Remove the display lid switch module (3). The display lid switch module is available using spare
part number 451724-001.
14. If it is necessary to replace the display bezel or any of the display assembly internal components,
remove the five rubber screw covers (1) and the five Torx T7M2.0×5.0 screws (2) that secure the
display bezel to the display assembly.
15. Flex the inside edges of the left and right sides (1) and the top and bottom sides (2) of the display
bezel until the bezel disengages from the display enclosure.
64
Chapter 4 Removal and replacement procedures
16. Remove the display bezel (3). The display bezel is available using spare part number
451733-001.
17. If it is necessary to replace the display hinges, remove the four Torx T7M2.0×5.0 screws (1) that
secure the display panel to the display enclosure.
18. Remove the display panel (2).
19. Remove the two Phillips PM2.0×4.0 screws (1) that secure each display hinge to the display
panel.
Component replacement procedures
65
20. Remove the display hinges (2). The left and right display hinges are available using spare part
number 451734-001.
Reverse this procedure to reassemble and install the display assembly.
66
Chapter 4 Removal and replacement procedures
Top cover
Description
Spare part number
Top cover (includes TouchPad, TouchPad cable, fingerprint reader board, and fingerprint reader
board cable)
451723-001
Before removing the top cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 41).
5.
Remove the following components:
a.
Hard drive (see Hard drive on page 52)
b.
Optical drive (see Optical drive on page 56)
c.
Switch cover (see Switch cover on page 57)
d.
Keyboard (see Keyboard on page 59)
e.
Display assembly (see Display assembly on page 62)
Remove the top cover:
1.
Turn the computer upside down, with the front toward you.
Component replacement procedures
67
2.
Remove the following:
(1) Four base enclosure rubber screw covers. The base enclosure rubber screw covers are included
in the Rubber Kit, spare part number 451744-001.
(2) Five Torx T8M2.5×4.0 screws.
(3) Three Torx T8M2.5×7.0 screw.
68
3.
Turn the computer right-side up, with the front toward you.
4.
Remove the three Torx T8M2.5×7.0 screws that secure the top cover to the computer.
Chapter 4 Removal and replacement procedures
5.
Lift the rear edge of the top cover and swing it up and forward until the top cover rests upside down
in front of the base enclosure.
6.
Release the ZIF connector (1) to which the fingerprint reader board cable is connected and
disconnect the fingerprint reader board cable (2) from the system board.
7.
Remove the top cover.
Reverse this procedure to install the top cover.
Component replacement procedures
69
System board
Description
Spare part number
Equipped with Intel Core Duo U7600 (1.20-GHz) processor (533-MHz FSB and 2-MB L2 cache)
451720-001
Equipped with Intel Core Duo U7500 (1.06-GHz) processor (533-MHz FSB and 2-MB L2 cache)
451719-001
Before removing the system board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 41).
5.
Remove the following components:
a.
Hard drive (see Hard drive on page 52)
b.
Optical drive (see Optical drive on page 56)
c.
Switch cover (see Switch cover on page 57)
d.
Keyboard (see Keyboard on page 59)
e.
Display assembly (see Display assembly on page 62)
f.
Top cover (see Top cover on page 67)
When replacing the system board, be sure that the following components are removed from the defective
system board and installed on the replacement system board:
●
SIM (see SIM on page 42)
●
Memory module (see Memory module on page 45)
●
RTC battery (see RTC battery on page 47)
●
WLAN module (see WLAN module on page 48)
●
WWAN module (see WWAN module on page 54)
●
Fan/heat sink assembly (see Fan/heat sink assembly on page 74)
●
PC Card assembly (see PC Card assembly on page 76)
●
Modem module (see Modem module on page 78)
Remove the system board:
1.
70
Turn the computer upside down, with the rear panel toward you.
Chapter 4 Removal and replacement procedures
2.
Disconnect the fan cable from the system board.
3.
Turn the computer right-side up, with the front toward you.
4.
Press the PC Card eject button (1) twice. The first press releases the PC Card eject button from the
PC Card slot. The second press releases the PC Card slot bezel from the PC Card slot. (The PC Card
slot bezel is partially ejected from the PC Card slot.) The PC Card slot bezel is included in the Plastics
Kit, spare part number 451743-001.
5.
Remove the PC Card slot bezel (2).
Component replacement procedures
71
72
6.
Disconnect the front LED board cable (1) and the speaker cable (2) from the system board.
7.
Remove the three Torx T8M2.5×7.0 screws (1) and the two Phillips PM2.0×10.0 screws (2) that
secure the system board to the base enclosure.
8.
Use the optical drive connector (1) to lift the left side of the system board (2) until it rests at an angle.
9.
Remove the system board (3) by sliding it away from the base enclosure at an angle.
Chapter 4 Removal and replacement procedures
Reverse the preceding procedure to install the system board.
Speaker assembly
Description
Spare part number
Speaker assembly
451747-001
Before removing the speaker assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 41).
5.
Remove the following components:
a.
Hard drive (see Hard drive on page 52)
b.
Optical drive (see Optical drive on page 56)
c.
Switch cover (see Switch cover on page 57)
d.
Keyboard (see Keyboard on page 59)
e.
Display assembly (see Display assembly on page 62)
f.
Top cover (see Top cover on page 67)
g.
System board (see System board on page 70)
Remove the speaker assembly:
1.
Remove the Torx T8M2.5×4.0 screw (1) that secures the speaker assembly to the base enclosure.
Component replacement procedures
73
2.
Remove the speaker assembly (2) from the base enclosure.
Reverse this procedure to install the speaker assembly.
Fan/heat sink assembly
NOTE: All fan/heat sink assembly spare part kits include thermal material.
Description
Spare part number
Fan/heat sink assembly
451731-001
Before removing the fan/heat sink assembly, follow these steps:
74
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 41).
5.
Remove the following components:
a.
Hard drive (see Hard drive on page 52)
b.
Optical drive (see Optical drive on page 56)
c.
Switch cover (see Switch cover on page 57)
d.
Keyboard (see Keyboard on page 59)
e.
Display assembly (see Display assembly on page 62)
f.
Top cover (see Top cover on page 67)
g.
System board (see System board on page 70)
Chapter 4 Removal and replacement procedures
Remove the fan/heat sink assembly:
1.
Remove the two Torx T8M2.5×4.0 screws (1) that secure the fan/heat sink assembly to the base
enclosure.
2.
Remove the fan/heat sink assembly (2) from the base enclosure.
NOTE: The thermal material must be thoroughly cleaned from the surfaces of the heat sink (1) and
(3), the processor (2), and graphics system component (4) each time the heat sink is removed. Thermal
material is included with all heat sink and processor spare part kits.
Reverse this procedure to install the fan/heat sink assembly.
NOTE: To properly ventilate the computer, allow at least a 7.6-cm (3-inch) clearance on the left and
right sides of the computer.
The computer uses an electric fan for ventilation. The fan is controlled by a temperature sensor and is
designed to turn on automatically when high temperature conditions exist. These conditions are affected
by high external temperatures, system power consumption, power management/battery conservation
Component replacement procedures
75
configurations, battery fast charging, and software requirements. Exhaust air is displaced through the
ventilation grill located on the left side of the computer.
PC Card assembly
Description
Spare part number
PC Card assembly
451742-001
Before removing the PC Card assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 41).
5.
Remove the following components:
a.
Hard drive (see Hard drive on page 52)
b.
Optical drive (see Optical drive on page 56)
c.
Switch cover (see Switch cover on page 57)
d.
Keyboard (see Keyboard on page 59)
e.
Display assembly (see Display assembly on page 62)
f.
Top cover (see Top cover on page 67)
g.
System board (see System board on page 70)
Remove the PC Card assembly:
76
1.
Turn the system board upside down, with the front toward you.
2.
Detach the slots on the PC Card assembly (1) from the tabs on the PC Card connector (2).
Chapter 4 Removal and replacement procedures
3.
Remove the PC Card assembly (3).
Reverse this procedure to install the PC Card assembly.
Component replacement procedures
77
Modem module
NOTE: All modem module spare part kits include a modem module cable.
Description
Spare part number
For use in all countries and regions except Australia and New Zealand
443899-001
For use only in Australia and New Zealand
443899-011
Before removing the modem module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 41).
5.
Remove the following components:
a.
Hard drive (see Hard drive on page 52)
b.
Optical drive (see Optical drive on page 56)
c.
Switch cover (see Switch cover on page 57)
d.
Keyboard (see Keyboard on page 59)
e.
Display assembly (see Display assembly on page 62)
f.
Top cover (see Top cover on page 67)
g.
System board (see System board on page 70)
Remove the modem module:
78
1.
Turn the system board upside down, with the front toward you.
2.
Remove the two Phillips PM2.5×4.0 screws (1) that secure the modem module to the system board.
3.
Disconnect the modem module (2) from the system board by lifting it straight up.
Chapter 4 Removal and replacement procedures
4.
Disconnect the modem module cable (3) from the system board.
Reverse this procedure to install the modem module.
Component replacement procedures
79
5
Computer Setup
Starting Computer Setup
Computer Setup is a preinstalled, ROM-based utility that can be used even when the operating system is
not working or will not load.
NOTE: Some of the Computer Setup menu items listed in this guide may not be supported by your
computer.
NOTE: Pointing devices are not supported in Computer Setup. You must use the keyboard to navigate
and make selections.
NOTE: An external keyboard connected by USB can be used with Computer Setup only if USB legacy
support is enabled.
To start Computer Setup, follow these steps:
80
1.
Turn on or restart the computer.
2.
Before Windows® opens and while the "F10 = ROM Based Setup" message is displayed in the
lower-left corner of the screen, press f10.
Chapter 5 Computer Setup
Using Computer Setup
Navigating and selecting in Computer Setup
The information and settings in Computer Setup are accessed from the File, Security, Diagnostics, and
System Configuration menus.
1.
Open Computer Setup by turning on or restarting the computer, and then pressing f10 while the
"F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen.
Because Computer Setup is not Windows-based, it does not support the TouchPad. Navigation and
selection are by keystroke:
●
To choose a menu or a menu item, use the arrow keys.
●
To select an item, press enter.
●
To close open dialog boxes and return to the main Computer Setup screen, press esc.
●
To view navigation information, press f1.
●
To change the language, press f2.
2.
Select the File, Security, Diagnostics, or System Configuration menu.
3.
To exit Computer Setup, choose one of the following methods:
●
To exit Computer Setup without saving your preferences, use the arrow keys to select File >
Ignore Changes and Exit. Then follow the instructions on the screen.
●
To save your preferences and exit Computer Setup, use the arrow keys to select File > Save
Changes and Exit. Then follow the instructions on the screen.
Your preferences go into effect when the computer restarts.
Restoring factory settings in Computer Setup
To return all settings in Computer Setup to the values that were set at the factory, follow these steps:
1.
Open Computer Setup by turning on or restarting the computer, and then pressing f10 while the
"F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen.
2.
Use the arrow keys to select File > Restore defaults, and then press enter.
3.
When the confirmation dialog box opens, press f10.
4.
To save your preferences and exit Computer Setup, use the arrow keys to select File > Save
Changes and Exit. Then follow the instructions on the screen.
Your preferences go into effect when the computer restarts.
NOTE: Your password settings and security settings are not changed when you restore the factory
settings.
Using Computer Setup
81
Computer Setup menus
The menu tables in this section provide an overview of Computer Setup options.
NOTE: Some of the Computer Setup menu items listed in this chapter may not be supported by your
computer.
File menu
82
Select
To do this
System information
●
View identification information for the computer and the batteries in the system.
●
View specification information for the processor, cache and memory size,
system ROM, video revision, and keyboard controller version.
Restore defaults
Replace the configuration settings in Computer Setup with the original factory
settings. (Password settings and security settings are not changed when you restore
the factory settings.)
Ignore changes and exit
Cancel any changes entered during the current session. Then exit and restart the
computer.
Save changes and exit
Save any changes entered during the current session. Then exit and restart the
computer. Your changes go into effect when the computer restarts.
Chapter 5 Computer Setup
Security menu
Select
To do this
Setup password
Enter, change, or delete a setup password.
Power-On password
Enter, change, or delete a power-on password.
Password options
●
Enable/disable stringent security.
●
Enable/disable password requirement on computer restart.
●
Enable/disable DriveLock on any computer hard drive and on optional
MultiBay hard drives.
●
Change a DriveLock user password or master password.
DriveLock passwords
NOTE: DriveLock settings are accessible only when you enter Computer Setup by
turning on (not restarting) the computer.
Smart Card security
Enable/disable support for smart card and Java™ Card power-on authentication.
NOTE: Power-on authentication for smart cards is supported only on computers
with optional smart card readers.
NOTE:
TPM Embedded Security
You must have an administrator password to change this setting.
Enable/disable support for Trusted Platform Module (TPM) Embedded Security,
which protects the computer from unauthorized access to owner functions available
in Embedded Security for ProtectTools. For more information, refer to the
ProtectTools software Help.
NOTE:
You must have a setup password to change this setting.
System IDs
Enter user-defined computer asset tracking number and ownership tag.
Disk Sanitizer
Run Disk Sanitizer to destroy all existing data on the primary hard drive. The
following options are available:
●
Fast: Runs the Disk Sanitizer erase cycle once.
●
Optimum: Runs the Disk Sanitizer erase cycle 3 times.
●
Custom: Allows you to select the desired number of Disk Sanitizer erase cycles
from a list.
CAUTION: If you run Disk Sanitizer, the data on the primary hard drive is
destroyed permanently.
Diagnostics menu
Select
To do this
Hard Drive Self-Test options
Run a comprehensive self-test on any hard drive in the system or on any optional
MultiBay hard drive.
Memory Check
Run a comprehensive check on system memory.
Startup Check (select models only)
Verify the system components needed for starting the computer.
Computer Setup menus
83
System Configuration menu
NOTE: Some of the listed System Configuration options may not be supported by your computer.
Select
To do this
Language (or press f2)
Change the Computer Setup language.
Boot options
●
Set f9, f10, and f12 delay when starting up.
●
Enable/disable CD-ROM boot.
●
Enable/disable floppy boot.
●
Enable/disable internal network adapter boot and set the boot mode (PXE or
RPL).
●
Enable/disable MultiBoot, which sets a boot order that can include most boot
devices in the system.
●
Set the Express Boot Popup delay in seconds.
●
Set the boot order.
●
Swap the functions of the fn key and left ctrl key.
●
Enable/disable multiple standard pointing devices at startup. (To set the
computer to support only a single, usually nonstandard, pointing device at
startup, select Disable.)
●
Enable/disable USB legacy support. When enabled, USB legacy support
allows the following:
Device configurations
84
Chapter 5 Computer Setup
◦
Use of a USB keyboard, mouse, and hub in Computer Setup even when
a Windows operating system is not running.
◦
Startup from bootable USB devices, including a hard drive, diskette drive,
or optical drive connected by a USB port to the computer or to an optional
docking device (select models only).
●
Select a parallel port mode: EPP (Enhanced Parallel Port), standard,
bidirectional, or ECP (Enhanced Capabilities Port).
●
Enable/disable BIOS DMA data transfers.
●
Enable/disable fan always on while connected to an AC outlet.
●
Enable/disable Intel® Data Execution Prevention or AMD® PSAE Execution
Disable. When enabled, the processor can disable some virus code execution,
which helps to improve computer security.
●
Enable/disable LAN Power Save. When enabled, saves power by turning off
the LAN when not in use.
●
Enable/disable SATA Native Mode.
●
Enable/disable Dual Core CPU.
●
Enable/disable Secondary Battery Fast Charge.
●
Choose Bit-shift or LBA assisted HDD Translation Mode.
●
Enable/disable Windows direct application launcher.
●
Enable/disable HP Lockout.
Select
To do this
Built-In Device Options
●
Enable/disable embedded WWAN Device Radio.
●
Enable/disable embedded WLAN Device Radio.
●
Enable/disable embedded Bluetooth® Device Radio.
●
Enable/disable LAN/WLAN Switching. When enabled, switches to a WLAN
when a LAN is either unavailable or disconnected.
●
Enable/disable Wake on LAN from Off.
●
Enable/disable the ambient light sensor.
●
Enable/disable the serial port.
●
Enable/disable the parallel port.
●
Enable/disable the flash media reader.
●
Enable/disable the USB port.
Port Options
CAUTION: Disabling the USB port also disables MultiBay devices and
ExpressCard devices on the advanced port replicator.
●
Enable/disable the 1394 port.
●
Enable/disable the cardbus slot.
●
Enable/disable the ExpressCard slot.
●
Enable/disable the infrared port.
●
Enable/disable the optical disk drive.
●
Enable/disable the network controller.
Computer Setup menus
85
6
Specifications
Computer specifications
Metric
U.S.
Depth
21.29 cm
8.38 in
Width
28.22 cm
11.11 in
Height (front to rear)
2.46 to 3.20 cm
0.97 to 1.26 in
Equipped with optical drive, 9-cell battery, and WLAN
module
1.77 kg
3.9 lbs
Equipped with optical drive, 6-cell battery, and WLAN
module
1.63
3.6 lbs
Equipped with optical drive, 3-cell battery, and WLAN
module
1.45
3.2 lbs
Equipped with 3-cell battery and WLAN module
1.27
2.8 lbs
Dimensions
Weight (varies by configuration)
Input power
Operating voltage
19.0 V dc @ 4.74 A – 90 W
Operating current
4.74 A
Temperature
Operating (not writing to optical disc)
0°C to 35°C
32°F to 95°F
Operating (writing to optical disc)
5°C to 35°C
41°F to 95°F
Nonoperating
-20°C to 60°C
-4°F to 140°F
Relative humidity
Operating
10% to 90%
Nonoperating
5% to 95%
Maximum altitude (unpressurized)
Operating (14.7 to 10.1 psia)
-15 m to 3,048 m
-50 ft to 10,000 ft
Nonoperating (14.7 to 4.4 psia)
-15 m to 12,192 m
-50 ft to 40,000 ft
Shock
86
Chapter 6 Specifications
Metric
U.S.
Operating
125 g, 2 ms, half-sine
Nonoperating
200 g, 2 ms, half-sine
Random vibration
Operating
0.75 g zero-to-peak, 10 Hz to 500 Hz, 0.25 oct/min sweep rate
Nonoperating
1.50 g zero-to-peak, 10 Hz to 500 Hz, 0.5 oct/min sweep rate
NOTE: Applicable product safety standards specify thermal limits for plastic surfaces. The computer operates well within this
range of temperatures.
12.1-inch, WXGA display specifications
Metric
U.S.
Height
16.9 cm
6.7 in
Width
26.2 cm
10.3 in
Diagonal
30.8 cm
12.1 in
Number of colors
Up to 16.8 million
Contrast ratio
250:1 (typical)
Brightness
180 nits (typical)
Dimensions
Pixel resolution
Pitch
0.279 × 0.279 mm
Format
1280 × 800
Configuration
RGB vertical stripe
Backlight
Edge lit
Character display
80 × 25
Total power consumption
4.0 W
Viewing angle
+/-40 horizontal, +120/–40° vertical (typical)
12.1-inch, WXGA display specifications
87
Hard drive specifications
100-GB*
80-GB*
60-GB*
Height
9.5 mm
9.5 mm
9.5 mm
Width
70 mm
70 mm
70 mm
Weight
101 g
101 g
101 g
Interface type
SATA
SATA
SATA
Transfer rate
100 MB/sec
100 MB/sec
100 MB/sec
Security
ATA security
ATA security
ATA security
Single track
3 ms
3 ms
3 ms
Average
13 ms
13 ms
13 ms
Maximum
24 ms
24 ms
24 ms
Logical blocks
195,350,400
156,280,320
117,210,240
Disc rotational speed
4200 rpm
4200 rpm
4200 rpm
Dimensions
Seek times (typical read, including setting)
Operating temperature
5°C to 55°C (41°F to 131°F)
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less. Actual drive specifications
may differ slightly.
NOTE:
88
Certain restrictions and exclusions apply. Contact technical support for details.
Chapter 6 Specifications
DVD±RW and CD-RW Double-Layer Combo Drive
specifications
Applicable disc
Center hole diameter
Read:
Write:
CD-DA, CD+(E)G, CD-MIDI, CD-TEXT, CD-ROM,
CD-ROM XA, MIXED MODE CD, CD-I, CD-I
Bridge (Photo-CD, Video CD), Multisession CD
(Photo-CD, CD-EXTRA, Portfolio, CD-R, CD-RW),
CD-R, CD-RW, DVD-ROM (DVD-5, DVD-9,
DVD-10, DVD-18), DVD-R, DVD-RW, DVD+R,
DVD+RW, DVD-RAM
CD-R and CD-RW
DVD+R, DVD+RW, DVD-R, DVDRW, DVD-RAM
1.5 cm (0.59 in)
Disc diameter
Standard disc
12 cm (4.72 in)
Mini disc
8 cm (3.15 in)
Disc thickness
1.2 mm (0.047 in)
Track pitch
0.74 µm
Access time
CD
DVD
Random
< 175 ms
< 230 ms
Full stroke
< 285 ms
< 335 ms
Audio output level
Line-out, 0.7 Vrms
Cache buffer
2 MB
Data transfer rate
24X CD-ROM
3,600 KB/sec
8X DVD-ROM
10,800 KB/sec
24X CD-R
3,600 KB/sec
16X CD-RW
2,400 KB/sec
8X DVD+R
10,800 KB/sec
4X DVD+RW
5,400 KB/sec
8X DVD-R
10,800 KB/sec
4X DVD-RW
5,400 KB/sec
2.4X DVD+R(9)
2,700 KB/sec
5X DVD-RAM
6,750 KB/sec
Transfer mode
Multiword DMA Mode
Startup time
< 15 seconds
Stop time
< 6 seconds
DVD±RW and CD-RW Double-Layer Combo Drive specifications
89
DVD/CD-RW Combo Drive specifications
Applicable disc
Center hole diameter
Read:
Write:
CD-DA, CD+(E)G, CD-MIDI, CD-TEXT, CD-ROM,
CD-ROM XA, MIXED MODE CD, CD-I, CD-I
Bridge (Photo-CD, Video CD), Multisession CD
(Photo-CD, CD-EXTRA, Portfolio, CD-R, CD-RW),
CD-R, CD-RW, DVD-ROM (DVD-5, DVD-9,
DVD-10, DVD-18), DVD-R, DVD-RW, DVD+R,
DVD+RW, DVD-RAM
CD-R and CD-RW
1.5 cm (0.59 in)
Disc diameter
Standard disc
12 cm (4.72 in)
Mini disc
8 cm (3.15 in)
Disc thickness
1.2 mm (0.047 in)
Track pitch
0.74 µm
Access time
CD
DVD
Random
< 110 ms
< 130 ms
Full stroke
< 210 ms
< 225 ms
Audio output level
Line-out, 0.7 Vrms
Cache buffer
2 MB
Data transfer rate
90
24X CD-ROM
3,600 KB/sec
8X DVD
3,600 KB/sec
24X CD-R
3,600 KB/sec
24X CD-RW
3,600 KB/sec
Transfer mode
Multiword DMA mode 2
Startup time
< 15 seconds
Stop time
< 6 seconds
Chapter 6 Specifications
DVD-ROM Drive
Applicable disc
DVD-ROM (DVD-5, DVD-9, DVD-10, DVD-18, CD-ROM (Mode 1 and 2), CD Digital
Audio, CD-XA ready (Mode 2, Form 1 and Form 2), CD-I (Mode 2, Form 1 and Form 2),
CD-R, CD-RW, Photo CD (single and multisession), CD-Bridge
Center hole diameter
1.5 cm (0.59 in)
Disc diameter
Standard disc
12 cm (4.72 in)
Mini disc
8 cm (3.15 in)
Disc thickness
1.2 mm (0.047 in)
Track pitch
0.74 µm
Access time
CD
DVD
Random
< 100 ms
< 125 ms
Full stroke
< 175 ms
< 225 ms
Audio output level
Line-out, 0.7 Vrms
Cache buffer
512 KB
Data transfer rate
CD-R (24X)
3600 KB/s (150 KB/s at 1X CD rate)
CD-RW (10X)
1500 KB/s (150 KB/s at 1X CD rate)
CD-ROM (24X)
3600 KB/s (150 KB/s at 1X CD rate)
DVD (8X)
10,800 KB/s (1,352 KB/s at 1X DVD rate)
Multiword DMA mode 2
16.6 MB/s
Startup time
< 10 seconds
Stop time
< 3 seconds
DVD-ROM Drive
91
System DMA specifications
Hardware DMA
System function
DMA0
Not applicable
DMA1*
Not applicable
DMA2*
Not applicable
DMA3
Not applicable
DMA4
Direct memory access controller
DMA5*
Available for PC Card
DMA6
Not assigned
DMA7
Not assigned
*PC Card controller can use DMA 1, 2, or 5.
92
Chapter 6 Specifications
System interrupt specifications
Hardware IRQ
System function
IRQ0
System timer
IRQ1
Standard 101-/102-Key or Microsoft® Natural Keyboard
IRQ2
Cascaded
IRQ3
Intel 82801DB/DBM USB2 Enhanced Host Controller—24CD
IRQ4
COM1
IRQ5*
Conexant AC—Link Audio Intel 82801DB/DBM SMBus Controller—24C3 Data Fax
Modem with SmartCP
IRQ6
Diskette drive
IRQ7*
Parallel port
IRQ8
System CMOS/real-time clock
IRQ9*
Microsoft ACPI-compliant system
IRQ10*
Intel USB UHCI controller—24C2
Intel 82852/82855 GM/GME Graphic Controller
Realtek RTL8139 Family PCI Fast Ethernet Controller
IRQ11
Intel USB EHCI controller—24CD
Intel USB UHCI controller—24C4
Intel USB UHCI controller—24C7
Intel Pro/Wireless 2200BG
TI OHCI 1394 host controller
TI PCI1410 CardBus controller
IRQ12
Synaptics PS/2 TouchPad
IRQ13
Numeric data processor
IRQ14
Primary IDE channel
IRQ15
Secondary IDE channel
*Default configuration; audio possible configurations are IRQ5, IRQ7, IRQ9, IRQ10, or none.
NOTE: PC Cards may assert IRQ3, IRQ4, IRQ5, IRQ7, IRQ9, IRQ10, IRQ11, or IRQ15. Either the infrared or the serial port
may assert IRQ3 or IRQ4.
System interrupt specifications
93
System I/O address specifications
94
I/O address (hex)
System function (shipping configuration)
000 - 00F
DMA controller no. 1
010 - 01F
Unused
020 - 021
Interrupt controller no. 1
022 - 024
Opti chipset configuration registers
025 - 03F
Unused
02E - 02F
87334 “Super I/O” configuration for CPU
040 - 05F
Counter/timer registers
044 - 05F
Unused
060
Keyboard controller
061
Port B
062 - 063
Unused
064
Keyboard controller
065 - 06F
Unused
070 - 071
NMI enable/RTC
072 - 07F
Unused
080 - 08F
DMA page registers
090 - 091
Unused
092
Port A
093 - 09F
Unused
0A0 - 0A1
Interrupt controller no. 2
I/O Address (hex)
System Function (shipping configuration)
0A2 - 0BF
Unused
0C0 - 0DF
DMA controller no. 2
0E0 - 0EF
Unused
0F0 - 0F1
Coprocessor busy clear/reset
0F2 - 0FF
Unused
100 - 16F
Unused
170 - 177
Secondary fixed disk controller
178 - 1EF
Unused
1F0 - 1F7
Primary fixed disk controller
1F8 - 200
Unused
201
JoyStick (decoded in ESS1688)
202 - 21F
Unused
Chapter 6 Specifications
I/O address (hex)
System function (shipping configuration)
220 - 22F
Entertainment audio
230 - 26D
Unused
26E - 26
Unused
278 - 27F
Unused
280 - 2AB
Unused
2A0 - 2A7
Unused
2A8 - 2E7
Unused
2E8 - 2EF
Reserved serial port
2F0 - 2F7
Unused
2F8 - 2FF
Infrared port
300 - 31F
Unused
320 - 36F
Unused
370 - 377
Secondary diskette drive controller
378 - 37F
Parallel port (LPT1/default)
380 - 387
Unused
388 - 38B
FM synthesizer—OPL3
38C - 3AF
Unused
3B0 - 3BB
VGA
3BC - 3BF
Reserved (parallel port/no EPP support)
3C0 - 3DF
VGA
3E0 - 3E1
PC Card controller in CPU
3E2 - 3E3
Unused
3E8 - 3EF
Internal modem
3F0 - 3F7
“A” diskette controller
3F8 - 3FF
Serial port (COM1/default)
CF8 - CFB
PCI configuration index register (PCIDIVO-1)
CFC - CFF
PCI configuration data register (PCIDIVO-1)
System I/O address specifications
95
System memory map specifications
96
Size
Memory address
System function
640 KB
00000000-0009FFFF
Base memory
128 KB
000A0000-000BFFFF
Video memory
48 KB
000C0000-000CBFFF
Video BIOS
160 KB
000C8000-000E7FFF
Unused
64 KB
000E8000-000FFFFF
System BIOS
15 MB
00100000-00FFFFFF
Extended memory
58 MB
04800000-07FFFFFF
Super extended memory
58 MB
04800000-07FFFFFF
Unused
2 MB
08000000-080FFFFF
Video memory (direct access)
4 GB
08200000-FFFEFFFF
Unused
64 KB
FFFF0000-FFFFFFFF
System BIOS
Chapter 6 Specifications
7
Screw listing
This section provides specification and reference information for the screws and screw locks used in the
computer. All screws listed in this section are available in the Screw Kit, spare part number 451745-001,
and the Display Screw Kit, spare part number 451737-001.
97
Phillips PM2.0×5.0 captive screw
Color
Quantity
Length
Thread
Head diameter
Black
8
5.0 mm
2.0 mm
4.5 mm
Where used:
(1) One screw that secures the Bluetooth module compartment cover to the computer (screw is captured
on the cover by a C-clip)
(2) Two screws that secure the memory module/WLAN module compartment cover to the computer
(screws are captured on the cover by C-clips)
(3) Two screws that secure the hard drive cover to the computer (screws are captured on the cover by Cclips)
98
Chapter 7 Screw listing
(4) One screw that secures the WWAN module compartment cover to the computer (screw is captured
on the cover by a C-clip)
Where used: 2 captive screws that secure the hard drive bracket to the computer (screws are captured
on the bracket by C-clips)
Phillips PM2.0×5.0 captive screw
99
Phillips PM2.0×5.0 screw
Color
Quantity
Length
Thread
Head diameter
Black
1
5.0 mm
2.0 mm
4.5 mm
Where used: One screw that secures the Bluetooth module to the Bluetooth module compartment cover
100 Chapter 7 Screw listing
Phillips PM2.5×4.0 screw
Color
Quantity
Length
Thread
Head diameter
Black
6
4.0 mm
2.5 mm
5.0 mm
Where used:
(1) Two screws that secure the WLAN module to the system board
(2) Two screws that secure the WWAN module to the system board
Phillips PM2.5×4.0 screw 101
Where used: 2 screws that secure the modem module to the system board
102 Chapter 7 Screw listing
Torx T8M2.5×7.0 screw
Color
Quantity
Length
Thread
Head diameter
Black
20
7.0 mm
2.5 mm
5.0 mm
Where used:
(1) One screw that secures the optical drive to the computer
(2) Six screws that secure the keyboard to the computer
Torx T8M2.5×7.0 screw 103
Where used: 2 screws that secure the display assembly to the computer
Where used: 2 screws that secure the display assembly to the computer
Where used: 3 screws that secure the top cover to the base enclosure
Where used: 3 screws that secure the top cover to the base enclosure
104 Chapter 7 Screw listing
Where used: 3 screws that secure the system board to the base enclosure
Torx T8M2.5×7.0 screw 105
Torx T8M2.5×4.0 screw
Color
Quantity
Length
Thread
Head diameter
Black
9
4.0 mm
2.5 mm
5.0 mm
Where used: One screw that secures the optical drive to the computer
Where used: 5 screws that secure the top cover to the base enclosure
106 Chapter 7 Screw listing
Where used:
(1) One screw that secures the speaker to the base enclosure
(2) Two screws that secure the fan/heat sink assembly to the base enclosure
Torx T8M2.5×4.0 screw 107
Phillips PM2.0×3.0 screw
Color
Quantity
Length
Thread
Head diameter
Silver
2
3.0 mm
2.0 mm
4.5 mm
Where used: 2 screws that secure the optical drive bracket to the optical drive
108 Chapter 7 Screw listing
Phillips PM1.5×3.0 screw
Color
Quantity
Length
Thread
Head diameter
Silver
1
3.0 mm
1.5 mm
4.0 mm
Where used: One screw that secures the display lid switch module to the display assembly
Phillips PM1.5×3.0 screw 109
Torx T6M2.0×5.0 screw
Color
Quantity
Length
Thread
Head diameter
Black
9
5.0 mm
2.0 mm
4.5 mm
Where used: 5 screws that secure the display bezel to the display enclosure
Where used: 4 screws that secure the display panel to the display enclosure
110 Chapter 7 Screw listing
Phillips PM2.0×4.0 screw
Color
Quantity
Length
Thread
Head diameter
Silver
4
4.0 mm
2.0 mm
4.5 mm
Where used: 4 screws that secure the display hinges to the display panel
Phillips PM2.0×4.0 screw 111
Phillips PM2.0×2.0 broad-head screw
Color
Quantity
Length
Thread
Heat width
Silver
2
7.0 mm
2.5 mm
7.0 mm
Where used: 2 screws that secure the fingerprint reader board to the top cover
112 Chapter 7 Screw listing
Phillips PM2.0×10.0 screw
Color
Quantity
Length
Thread
Head diameter
Black
2
10.0 mm
2.0mm
4.5 mm
Where used: 2 screws that secure the system board to the base enclosure
Phillips PM2.0×10.0 screw 113
8
Backup and recovery in
Windows Vista
Creating recovery discs
After setting up the computer for the first time, be sure to create a set of recovery discs of the full factory
image. The recovery discs are used to start up (boot) the computer and recover the operating system and
software to factory settings in case of system instability or failure.
Note the following guidelines before creating recovery discs:
●
Use any of the following types of discs: CD-R, DVD+R, DVD+R DL, DVD-R, or DVD-R DL (purchased
separately). The discs you use will depend on the type of optical drive installed in your computer.
Because DVDs store more information than CDs, DVDs and DVDs with double-layer (DL) support
reduce the number of discs required.
NOTE: Read-write discs, such as CD-RW, DVD+RW, and DVD-RW, are not compatible with the
HP Backup & Recovery Manager software.
●
The computer must be connected to AC power during the process.
●
Only one set of the recovery discs can be created per computer.
●
Number each disc before inserting it into the optical drive of the computer.
●
If necessary, you can cancel the disc creation before you have finished creating the recovery discs.
The next time you select Create a set of recovery discs (Recommended), you will be
prompted to continue the disc creation.
To create a set of recovery discs:
1.
Select Start > All Programs > HP Backup & Recovery > Backup & Recovery
Manager.
2.
Click Next.
3.
Click Create a set of recovery discs (Recommended), and then click Next.
4.
Follow the on-screen instructions.
114 Chapter 8 Backup and recovery in Windows Vista
Backing up your information
NOTE: You can only recover files that you have previously backed up. HP recommends that you use
HP Backup & Recovery Manager to create an entire drive backup as soon as you set up your computer.
With HP Backup & Recovery Manager, you can perform the following tasks:
●
Backing up your information regularly to protect your important system files
●
Creating system recovery points that allow you to reverse undesireable changes to your computer
by restoring the computer to an earlier state
●
Scheduling backups at specific intervals or events
When to back up
●
On a regularly scheduled basis
NOTE: Set reminders to back up your information periodically.
●
Before the computer is repaired or restored
●
Before you add or modify hardware or software
Backup suggestions
●
Create a set of recovery discs using HP Backup & Recovery Manager.
●
Create system recovery points using HP Backup & Recovery Manager, and periodically copy them
to disc.
●
Store personal files in the Documents folder and back up these folders periodically.
●
Back up templates stored in their associated programs.
●
Save customized settings in a window, toolbar, or menu bar by taking a screen shot of your settings.
The screen shot can be a time saver if you have to reset your preferences.
To copy the screen and paste it into a word-processing document:
a.
Display the screen.
b.
Copy the screen.
To copy only the active window, press alt+fn+prt sc.
To copy the entire screen, press fn+prt sc.
c.
Open a word-processing document, and then select Edit > Paste.
NOTE: Before you can perform backup and recovery procedures, the computer must be connected to
external power.
NOTE: Drivers, utilities, and software installed by HP can be copied to a CD or to a DVD using HP
Backup & Recovery Manager.
Backing up your information 115
Backing up specific files or folders
You can back up specific files or folders to the recovery partition on the hard drive, to an optional external
hard drive, or to optical discs (CDs or DVDs).
NOTE: This process will take several minutes, depending on the file size and the speed of the computer.
To back up specific files or folders:
1.
Select Start > All Programs > HP Backup & Recovery > Backup & Recovery
Manager.
2.
Click Next.
3.
Click Create or manage backups, and then click Next.
4.
Click Back up user created files and folders, and then click Next.
5.
Follow the on-screen instructions.
Backing up the entire hard drive
When you perform a complete backup of the hard drive, you are saving the full factory image, including
the Windows® operating system, software, and all personal files and folders.
NOTE: A copy of the entire hard drive image can be stored on another hard drive, on a network drive,
or on recovery discs that you create.
NOTE: This process may take over an hour, depending on your computer speed and the amount of
data being stored.
To back up your entire hard drive:
1.
Select Start > All Programs > HP Backup & Recovery > Backup & Recovery
Manager.
2.
Click Next.
3.
Click Create or manage backups, and then click Next.
4.
Click Create or manage Entire Drive Backups, and then click Next.
5.
Follow the on-screen instructions.
116 Chapter 8 Backup and recovery in Windows Vista
Creating recovery points
When you back up modifications since your last backup, you are creating system recovery points. This
allows you to save a snapshot of your hard drive at a specific point in time. You can then recover back
to that point if you want to reverse subsequent changes made to your system.
NOTE: The first system recovery point, a snapshot of the entire image, is automatically created the first
time you perform a backup. Subsequent recovery points make copies of changes made after that time.
HP recommends that you create recovery points at the following times:
●
Before you add or extensively modify software or hardware
●
Periodically, whenever the system is performing optimally
NOTE: Recovering to an earlier recovery point does not affect data files or e-mails created since that
recovery point.
To create a system recovery point:
1.
Select Start > All Programs > HP Backup & Recovery > Backup & Recovery
Manager.
2.
Click Next.
3.
Click Create or manage backups, and then click Next.
4.
Click Create or manage Recovery Points, and then click Next.
5.
Follow the on-screen instructions.
Scheduling backups
Use HP Backup Scheduler to schedule backups for the entire system, for recovery points, or for specific
files and folders. With this tool, you can schedule backups at specific intervals (daily, weekly, or monthly)
or at specific events, such as at system restart or when you dock to an optional docking station (select
models only).
To schedule backups:
1.
Select Start > All Programs > HP Backup & Recovery > HP Backup Scheduler.
2.
Follow the on-screen instructions.
Backing up your information 117
Performing a recovery
NOTE: You can only recover files that you have previously backed up. HP recommends that you use
HP Backup & Recovery Manager to create an entire drive backup as soon as you set up your computer.
HP Backup & Recovery Manager helps you with the following tasks for safeguarding your information
and restoring it in case of a system failure:
●
Recovering important files—This feature helps you reinstall important files without performing a full
system recovery.
●
Performing a full system recovery—With HP Backup & Recovery Manager, you can recover your full
factory image if you experience system failure or instability. HP Backup & Recovery Manager works
from a dedicated recovery partition on the hard drive or from recovery discs you create.
Performing a recovery from the recovery discs
To perform a recovery from the recovery discs, follow these steps:
1.
Back up all personal files.
2.
Insert the first recovery disc into the optical drive and restart the computer.
3.
Follow the on-screen instructions.
Performing a recovery from the hard drive
There are 2 ways to initiate a recovery from the hard drive:
●
From within Windows
●
From the recovery partition
118 Chapter 8 Backup and recovery in Windows Vista
Initiating a recovery in Windows
To initiate a recovery in Windows, follow these steps:
1.
Back up all personal files.
2.
Select Start > All Programs > HP Backup & Recovery > Backup & Recovery
Manager.
3.
Click Next.
4.
Click Perform a recovery, and then click Next.
5.
Follow the on-screen instructions.
Initiating a recovery from the hard drive recovery partition
To initiate a recovery from the hard drive recovery partition, follow these steps:
1.
Back up all personal files.
2.
Restart the computer, and then press f11 before the Windows operating system loads.
3.
Click a recovery option, and then click Next.
4.
Follow the on-screen instructions.
Performing a recovery 119
9
Backup and recovery in
Windows XP
Creating recovery discs
After setting up the computer for the first time, be sure to create a set of recovery discs of the full factory
image. The recovery discs are used to start up (boot) the computer and recover the operating system and
software to factory settings in case of system instability or failure.
Note the following guidelines before creating recovery discs:
●
Use any of the following types of discs: CD-R, DVD+R, DVD+R DL, DVD-R, or DVD-R DL (purchased
separately). The discs you use will depend on the type of optical drive installed in your computer.
Because DVDs store more information than CDs, DVDs and DVDs with double-layer (DL) support
reduce the number of discs required.
NOTE: Read-write discs, such as CD-RW, DVD+RW, and DVD-RW, are not compatible with the
HP Backup and Recovery Manager software.
●
The computer must be connected to AC power during the process.
●
Only one set of the recovery discs can be created per computer.
●
Number each disc before inserting it into the optical drive of the computer.
●
If necessary, you can cancel the disc creation before you have finished creating the recovery discs.
The next time you select Create factory software recovery CDs or DVDs to recover the
system (Highly recommended), you will be prompted to continue the disc creation.
To create a set of recovery discs:
1.
Select Start > All Programs > HP Backup & Recovery > HP Backup and Recovery
Manager.
2.
Click Next.
3.
Click Create factory software recovery CDs or DVDs to recover the system (Highly
recommended), and then click Next.
4.
Follow the on-screen instructions.
120 Chapter 9 Backup and recovery in Windows XP
Backing up your information
NOTE: You can only recover files that you have previously backed up. HP recommends that you use
HP Backup and Recovery Manager to create an entire drive backup as soon as you set up your computer.
With HP Backup and Recovery Manager, you can perform the following tasks:
●
Backing up your information regularly to protect your important system files
●
Creating system recovery points that allow you to reverse undesireable changes to your computer
by restoring the computer to an earlier state
●
Scheduling backups at specific intervals or events
When to back up
●
On a regularly scheduled basis
NOTE: Set reminders to back up your information periodically.
●
Before the computer is repaired or restored
●
Before you add or modify hardware or software
Backup suggestions
●
Create a set of recovery discs using HP Backup and Recovery Manager.
●
Create system recovery points using HP Backup and Recovery Manager, and periodically copy them
to disc.
●
Store personal files in the My Documents folder and back up these folders periodically.
●
Back up templates stored in their associated programs.
●
Save customized settings in a window, toolbar, or menu bar by taking a screen shot of your settings.
The screen shot can be a time saver if you have to reset your preferences.
To copy the screen and paste it into a word-processing document:
a.
Display the screen.
b.
Copy the screen.
To copy only the active window, press alt+fn+prt sc.
To copy the entire screen, press fn+prt sc.
c.
Open a word-processing document, and then select Edit > Paste.
NOTE: Before you can perform backup and recovery procedures, the computer must be connected to
external power.
NOTE: Drivers, utilities, and software installed by HP can be copied to a CD or to a DVD using HP
Backup and Recovery Manager.
Backing up your information 121
Backing up specific files or folders
You can back up specific files or folders to the recovery partition on the hard drive, to an optional external
hard drive, or to optical discs (CDs or DVDs).
NOTE: This process will take several minutes, depending on the file size and the speed of the computer.
To back up specific files or folders:
1.
Select Start > All Programs > HP Backup & Recovery > HP Backup and Recovery
Manager.
2.
Click Next.
3.
Click Back up to protect system settings and important data files, and then click
Next.
4.
Click Back up individual files and folders, and then click Next.
5.
Follow the on-screen instructions.
Backing up the entire hard drive
When you perform a complete backup of the hard drive, you are saving the full factory image, including
the Windows® operating system, software, and all personal files and folders.
NOTE: A copy of the entire hard drive image can be stored on another hard drive, on a network drive,
or on recovery discs that you create.
NOTE: This process may take over an hour, depending on your computer speed and the amount of
data being stored.
To back up your entire hard drive:
1.
Select Start > All Programs > HP Backup & Recovery > HP Backup and Recovery
Manager.
2.
Click Next.
3.
Click Back up to protect system settings and important data files, and then click
Next.
4.
Click Back up entire hard drive, and then click Next.
5.
Follow the on-screen instructions.
122 Chapter 9 Backup and recovery in Windows XP
Creating recovery points
When you back up modifications since your last backup, you are creating system recovery points. This
allows you to save a snapshot of your hard drive at a specific point in time. You can then recover back
to that point if you want to reverse subsequent changes made to your system.
NOTE: The first system recovery point, a snapshot of the entire image, is automatically created the first
time you perform a backup. Subsequent recovery points make copies of changes made after that time.
HP recommends that you create recovery points at the following times:
●
Before you add or extensively modify software or hardware
●
Periodically, whenever the system is performing optimally
NOTE: Recovering to an earlier recovery point does not affect data files or e-mails created since that
recovery point.
To create a system recovery point:
1.
Select Start > All Programs > HP Backup & Recovery > HP Backup and Recovery
Manager.
2.
Click Next.
3.
Click Back up to protect system settings and important data files, and then click
Next.
4.
Click Create or manage Recovery Points, and then click Next.
5.
Follow the on-screen instructions.
Scheduling backups
Use HP Backup Scheduler to schedule backups for the entire system, for recovery points, or for specific
files and folders. With this tool, you can schedule backups at specific intervals (daily, weekly, or monthly)
or at specific events, such as at system restart or when you dock to an optional docking station (select
models only).
To schedule backups:
1.
Select Start > All Programs > HP Backup & Recovery > HP Backup Scheduler.
2.
Follow the on-screen instructions.
Backing up your information 123
Performing a recovery
NOTE: You can only recover files that you have previously backed up. HP recommends that you use
HP Backup and Recovery Manager to create an entire drive backup as soon as you set up your computer.
HP Backup and Recovery Manager helps you with the following tasks for safeguarding your information
and restoring it in case of a system failure:
●
Recovering important files—This feature helps you reinstall important files without performing a full
system recovery.
●
Performing a full system recovery—With HP Backup and Recovery Manager, you can recover your
full factory image if you experience system failure or instability. HP Backup and Recovery Manager
works from a dedicated recovery partition on the hard drive or from recovery discs you create.
Performing a recovery from the recovery discs
To perform a recovery from the recovery discs, follow these steps:
1.
Back up all personal files.
2.
Insert the first recovery disc into the optical drive and restart the computer.
3.
Follow the on-screen instructions.
Performing a recovery from the hard drive
There are 2 ways to initiate a recovery from the hard drive:
●
From within Windows
●
From the recovery partition
124 Chapter 9 Backup and recovery in Windows XP
Initiating a recovery in Windows
To initiate a recovery in Windows, follow these steps:
1.
Back up all personal files.
2.
Select Start > All Programs > HP Backup & Recovery > HP Backup and Recovery
Manager.
3.
Click Next.
4.
Click Recover important files or the entire system, and then click Next.
5.
Follow the on-screen instructions.
Initiating a recovery from the hard drive recovery partition
To initiate a recovery from the hard drive recovery partition, follow these steps:
1.
Back up all personal files.
2.
Restart the computer, and then press f11 before the Windows operating system loads.
3.
Click a recovery option, and then click Next.
4.
Follow the on-screen instructions.
Performing a recovery 125
10 Connector pin assignments
Audio-out (headphone)
Pin
Signal
1
Audio out, left channel
2
Audio out, right channel
3
Ground
Audio-in (microphone)
Pin
Signal
1
Audio signal in
2
Audio signal in
3
Ground
126 Chapter 10 Connector pin assignments
External monitor
Pin
Signal
1
Red analog
2
Green analog
3
Blue analog
4
Not connected
5
Ground
6
Ground analog
7
Ground analog
8
Ground analog
9
+5 VDC
10
Ground
11
Monitor detect
12
DDC 2B data
13
Horizontal sync
14
Vertical sync
15
DDC 2B clock
External monitor 127
RJ-11 (modem)
Pin
Signal
1
Unused
2
Tip
3
Ring
4
Unused
5
Unused
6
Unused
RJ-45 (network)
Pin
Signal
1
Transmit +
2
Transmit -
3
Receive +
4
Unused
5
Unused
6
Receive -
7
Unused
8
Unused
128 Chapter 10 Connector pin assignments
Universal Serial Bus
Pin
Signal
1
+5 VDC
2
Data -
3
Data +
4
Ground
Universal Serial Bus 129
11 Power cord set requirements
The wide range input feature of the computer permits it to operate from any line voltage from 100 to 120
volts AC or from 220 to 240 volts AC.
The 3-conductor power cord set included with the computer meets the requirements for use in the country
or region where the equipment is purchased.
Power cord sets for use in other countries and regions must meet the requirements of the country or region
where the computer is used.
Requirements for all countries and regions
The requirements listed below are applicable to all countries and regions:
●
The length of the power cord set must be at least 1.5 m (5.0 ft) and no more than 2.0 m (6.5 ft).
●
All power cord sets must be approved by an acceptable accredited agency responsible for evaluation
in the country or region where the power cord set will be used.
●
The power cord sets must have a minimum current capacity of 10 amps and a nominal voltage rating
of 125 or 250 V AC, as required by the power system of each country or region.
●
The appliance coupler must meet the mechanical configuration of an EN 60 320/IEC 320 Standard
Sheet C13 connector for mating with the appliance inlet on the back of the computer.
130 Chapter 11 Power cord set requirements
Requirements for specific countries and regions
Country/region
Accredited agency
Applicable note number
Australia
EANSW
1
Austria
OVE
1
Belgium
CEBC
1
Canada
CSA
2
Denmark
DEMKO
1
Finland
FIMKO
1
France
UTE
1
Germany
VDE
1
Italy
IMQ
1
Japan
METI
3
Korea
EK
4
The Netherlands
KEMA
1
Norway
NEMKO
1
The People's Republic of China
CCC
5
Sweden
SEMKO
1
Switzerland
SEV
1
Taiwan
BSMI
4
The United Kingdom
BSI
1
The United States
UL
2
1.
The flexible cord must be Type HO5VV-F, 3-conductor, 1.0-mm² conductor size. Power cord set fittings (appliance coupler
and wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it
will be used.
2.
The flexible cord must be Type SPT-3 or equivalent, No. 18 AWG, 3-conductor. The wall plug must be a two-pole grounding
type with a NEMA 5-15P (15 A, 125 V) or NEMA 6-15P (15 A, 250 V) configuration.
3.
The appliance coupler, flexible cord, and wall plug must bear a “T” mark and registration number in accordance with the
Japanese Dentori Law. The flexible cord must be Type VCT or VCTF, 3-conductor, 1.00-mm² conductor size. The wall plug
must be a two-pole grounding type with a Japanese Industrial Standard C8303 (7 A, 125 V) configuration.
4.
The flexible cord must be Type RVV, 3-conductor, 0.75-mm² conductor size. Power cord set fittings (appliance coupler and
wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it will be
used.
5.
The flexible cord must be Type VCTF, 3-conductor, 0.75-mm² conductor size. Power cord set fittings (appliance coupler and
wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it will be
used.
Requirements for specific countries and regions 131
12 Recycling
Battery
When a battery has reached the end of its useful life, do not dispose of the battery in general household
waste. Follow the local laws and regulations in your area for computer battery disposal.
Display
WARNING! The backlight contains mercury. Exercise caution when removing and handling the
backlight to avoid damaging this component and causing exposure to the mercury.
CAUTION: The procedures in this appendix can result in damage to display components. The only
components intended for recycling purposes are the liquid crystal display (LCD) panel and the backlight.
Careful handling must be exercised when removing these components. When you remove these
components, handle them carefully.
NOTE: Materials Disposal. This HP product contains mercury in the backlight in the display assembly
that might require special handling at end-of-life. Disposal of mercury may be regulated because of
environmental considerations. For disposal or recycling information, contact your local authorities, or see
the Electronic Industries Alliance (EIA) Web site at http://www.eiae.org.
This section provides disassembly instructions for the display assembly. The display assembly must be
disassembled to gain access to the backlight (1) and the liquid crystal display (LCD) panel (2).
NOTE: The procedures provided in this appendix are general disassembly instructions. Specific details,
such as screw sizes, quantities, and locations, and component shapes and sizes, can vary from one
computer model to another.
132 Chapter 12 Recycling
Perform the following steps to disassemble the display assembly:
1.
Remove all screw covers (1) and screws (2) that secure the display bezel to the display assembly.
2.
Lift up and out on the left and right inside edges (1) and the top and bottom inside edges (2) of the
display bezel until the bezel disengages from the display assembly.
3.
Remove the display bezel (3).
Display 133
4.
Disconnect all display panel cables (1) from the display inverter and remove the inverter (2).
5.
Remove all screws (1) that secure the display panel assembly to the display enclosure.
6.
Remove the display panel assembly (2) from the display enclosure.
7.
Turn the display panel assembly upside down.
8.
Remove all screws that secure the display panel frame to the display panel.
9.
Use a sharp-edged tool to cut the tape (1) that secures the sides of the display panel to the display
panel frame.
134 Chapter 12 Recycling
10. Remove the display panel frame (2) from the display panel.
11. Remove the screws (1) that secure the backlight cover to the display panel.
12. Lift the top edge of the backlight cover (2) and swing it outward.
13. Remove the backlight cover.
14. Turn the display panel right-side up.
Display 135
15. Remove the backlight cables (1) from the clip (2) in the display panel.
16. Turn the display panel upside down.
WARNING! The backlight contains mercury. Exercise caution when removing and handling the
backlight to avoid damaging this component and causing exposure to the mercury.
17. Remove the backlight frame from the display panel.
136 Chapter 12 Recycling
18. Remove the backlight from the backlight frame.
19. Disconnect the display panel cable (1) from the LCD panel.
20. Remove the screws (2) that secure the LCD panel to the display rear panel.
21. Release the LCD panel (3) from the display rear panel.
22. Release the tape (4) that secures the LCD panel to the display rear panel.
23. Remove the LCD panel.
24. Recycle the LCD panel and backlight.
Display 137
Index
Symbols/Numerics
1394a port 14
A
AC adapter, spare part
number 27, 29
ambient light sensor 5
antennae, disconnecting 50, 54
audio cable, illustrated 26
audio, product description 2
audio-in jack
location 14, 15
pin assignments 126
audio-out jack
location 14, 15
pin assignments 126
B
backing up 115, 121
backup
files and folders 116, 122
hard drive 116, 122
modifications made to the
system 117, 123
scheduling 117, 123
base enclosure, spare part
number 21, 31
battery
location 16
removal 41
spare part numbers 21, 31,
41
battery bay 16
battery latches 16
battery light 8, 11
Bluetooth module
location 11
removal 43
spare part number 24, 31,
43
138 Index
Bluetooth module cable,
illustrated 26
Bluetooth module compartment
Bluetooth module compartment
cover
illustrated 25
removal 43
boot options 84
boot order 84
bottom components 16
business-card holder 17
buttons
info 6
power 6
presentation 6
TouchPad on/off 7
volume mute 7
wireless 6
17
C
Cable Kit
contents 26
spare part number 24, 26,
31
cables, service considerations 35
caps lock light 8
carrying case, spare part
number 28
chipset, product description 1
CMOS clearing 39
components
bottom 16
buttons 6
display 5
fingerprint reader 6
front 11
keys 7
left-side 12
lights 8
pointing devices 10
rear 13
right-side 14
top 6
computer feet
locations 40
spare part number 21, 32,
40
Computer Setup
accessing 80
Diagnostics menu 83
File menu 82
navigating and selecting 81
restoring factory settings 81
Security menu 83
System Configuration menu 84
using 81
computer specifications 86
connectors
docking 14, 15
service considerations 35
creating recovery points 117,
123
D
Diagnostics menu 83
Disk Sanitizer 83
diskette drive
precautions 35
product description 2
spare part number 28
display assembly
removal 62
spare part number 19, 32,
62
display bezel
removal 64
spare part number 19, 32,
65
display component recycling 132
display components 5
display enclosure, spare part
number 20, 32
display hinge
removal 65
spare part number 20, 32,
66
display lid switch module
removal 63
spare part number 20, 31
display panel cable, spare part
number 20, 32
display panel, removal 65
display release latch 5, 11
Display Screw Kit, spare part
number 20, 32
display specifications 87
display switch 5
docking connector 14, 15
docking station, spare part
numbers 27, 29, 33
docking support, product
description 3
drive light 8, 11
DriveLock password 83
drives
boot order 84
preventing damage 35
DVD-ROM Drive
precautions 35
removal 56
spare part numbers 21, 27,
31, 56
specifications 91
DVD/CD-RW Combo Drive
precautions 35
removal 56
spare part number 21, 27,
28, 31, 56
specifications 90
DVD±RW and CD-RW Combo Drive
precautions 35
removal 56
spare part number 21, 27,
32, 56
specifications 89
E
electrostatic discharge 36
esc key 7
Ethernet, product description
2
Execution Disable 84
external media cards, product
description 3
external monitor port
location 14, 15
pin assignments 127
External MultiBay II power cable
and stand, spare part
number 27
External MultiBay II, spare part
number 27
F
fan/heat sink assembly
removal 74
spare part number 21, 32,
74
feet
locations 40
spare part number 21, 32,
40
File menu 82
fn key 7
front components 11
function keys 7
G
graphics, product description
grounding equipment and
methods 38
1
H
hard drive
location 16
precautions 35
product description 1
removal 52
spare part numbers 24, 27,
32, 33, 52
specifications 88
hard drive backup 116, 122
hard drive bay 16
hard drive bracket, removal 53
hard drive cover
illustrated 25
removal 52
hard drive recovery 118, 124
hard drive test 83
headphone jack
location 14, 15
pin assignments 126
hinge
removal 65
spare part number 20, 32,
66
HP Extended Life Battery, spare part
number 27
HP Fingerprint Sensor 7
I
I/O address specifications 94
info button 6
interrupt specifications 93
J
jacks
audio-in 14, 15
audio-out 14, 15
headphone 14, 15
microphone 14, 15
modem 12
network 13
RJ-11 12
RJ-45 13
K
keyboard
product description 3
removal 59
spare part numbers 20, 32,
59
keypad keys 7
keys
esc 7
fn 7
function 7
keypad 7
Windows applications 7
Windows logo 7
L
Label Kit, spare part number 27,
32
LAN Power Save 84
language, changing in Computer
Setup 84
left-side components 12
legacy support, Universal Serial Bus
(USB) 80, 84
lights
battery 8, 11
caps lock 8
Index 139
drive 8, 11
num lock 9
power 8, 11
volume down 9
volume mute 9
volume up 9
wireless 8, 11
M
mass storage devices, spare part
numbers 27
Media Card Reader 14
memory check 83
memory map specifications 96
memory module
product description 1
removal 45
spare part numbers 24, 32,
45
memory module/WLAN module
compartment 16
memory module/WLAN module
compartment cover
illustrated 25
removal 45
microphone 5
microphone jack
location 14, 15
pin assignments 126
modem jack
location 12
pin assignments 128
modem module
product description 2
removal 78
spare part numbers 21, 31,
78
monitor port
location 14, 15
pin assignments 127
N
navigating in Computer Setup
network jack
location 13
pin assignments 128
num lock light 9
O
operating system, product
description 4
140 Index
81
optical drive
location 12
precautions 35
product description 2
removal 56
spare part numbers 21, 27,
31, 32, 56
specifications 89, 90, 91
optical drive light 12
P
packing guidelines 37
panels, product description 1
parallel port mode 84
password clearing 39
passwords 83
PC Card assembly
removal 76
spare part number 21, 32,
76
PC Card slot 14
PC Card slot bezel, illustrated 25
pin assignments
audio-in jack 126
audio-out jack 126
external monitor port 127
headphone jack 126
microphone jack 126
modem jack 128
monitor port 127
network jack 128
RJ-11 128
RJ-45 jack 128
Universal Serial Bus (USB)
port 129
plastic parts 34
Plastics Kit
contents 25
spare part number 21, 25,
32
pointing device components
illustrated 10
pointing stick 10
pointing stick buttons 10
TouchPad 10
TouchPad buttons 10
TouchPad on/off button 10
TouchPad scroll zone 10
pointing devices, product
description 3
pointing stick 10
pointing stick buttons 10
pointing stick cable
removal 61
ports
1394a 14
external monitor port 14, 15
monitor port 14, 15
product description 3
Universal Serial Bus (USB) 12,
14, 15
power button 6
power connector 12
power cord
set requirements 130
spare part numbers 28, 29
power light 8, 11
power requirements, product
description 3
power-on password 83
presentation button 6
processor, product description 1
product description
audio 2
chipset 1
diskette drive 2
docking support 3
Ethernet 2
external media cards 3
graphics 1
hard drives 1
keyboard 3
memory module 1
modem module 2
operating system 4
optical drives 2
panels 1
pointing devices 3
ports 3
power requirements 3
processors 1
security 3
serviceability 4
wireless 2
R
rear components 13
recovery discs
creating 114, 120
using 118, 124
recovery partition 119, 125
recovery points 117, 123
removal/replacement
preliminaries 34
procedures 40
restoring Computer Setup factory
settings 81
right-side components 14
RJ-11 jack
location 12
pin assignments 128
RJ-45 jack
location 13
pin assignments 128
RTC battery
removal 47
spare part number 24, 31,
47
Rubber Kit, spare part
number 21, 32
S
scheduling backups 117, 123
Screw Kit
contents 97
spare part number 28, 32
screw listing 97
security cable slot 13
Security menu 83
security, product description 3
selecting in Computer Setup 81
serial number 18, 40
service considerations 34
serviceability, product
description 4
SIM slot 16
SIM, removal 42
smart card reader module, spare
part number 24, 32
smart card security 83
speaker 16
speaker assembly
removal 73
spare part number 21, 32,
73
specifications
computer 86
display 87
DVD-ROM Drive 91
DVD/CD-RW Combo Drive 90
DVD±RW and CD-RW Combo
Drive 89
hard drive 88
I/O addresses 94
interrupts 93
memory map 96
optical drive 89, 90, 91
system DMA 92
startup check 83
static-shielding materials 38
stringent security 83
switch cover
removal 57
spare part number 20, 31,
57
system backup 116, 122
system board
removal 70
spare part numbers 21, 31,
70
System Configuration menu 84
system DMA 92
system fan 84
system information 82
system memory map 96
system recovery points 117, 123
T
thermal material, replacement 75
tools required 34
top components 6
top cover
removal 67
spare part number 21, 31,
67
TouchPad 10
TouchPad buttons 10
TouchPad on/off button 7, 10
TouchPad scroll zone 10
transporting guidelines 37
V
vents 12, 14, 15, 16
volume down light 9
volume mute button 7
volume mute light 9
volume scroll zone 7
volume up light 9
W
Windows applications key 7
Windows logo key 7
wireless antennae,
disconnecting 50, 54
wireless button 6
wireless light 8, 11
wireless, product description 2
WLAN module
removal 48
spare part numbers 21, 29,
48
workstation guidelines 37
WWAN module
removal 54
spare part numbers 24, 31,
54
WWAN module compartment 16
WWAN module compartment cover
illustrated 25
removal 54
U
Universal Serial Bus (USB) legacy
support 84
Universal Serial Bus (USB) port
location 14, 15
pin assignments 129
unknown password 39
USB legacy support 80
Index 141
Download PDF

advertising