Compaq 2800 Laptop User Manual

268135-002.book Page 1 Thursday, October 24, 2002 4:10 PM
b
Maintenance and Service Guide
Compaq Evo Notebook N800c Series
Compaq Evo Notebook N800v Series
Compaq Evo Notebook N800w Series
Compaq Presario 2800 Mobile PC
Document Part Number: 268135-002
October 2002
This guide is a troubleshooting reference used for maintaining
and servicing the notebook. It provides comprehensive
information on identifying computer features, components, and
spare parts, troubleshooting computer problems, and performing
computer disassembly procedures.
268135-002.book Page 2 Thursday, October 24, 2002 4:10 PM
© 2002 Compaq Information Technologies Group, L.P.
Compaq, the Compaq logo, Evo, and Presario are trademarks of Compaq
Information Technologies Group, L.P. in the U.S. and/or other countries.
Microsoft and Windows are trademarks of Microsoft Corporation in the U.S.
and/or other countries. Intel, Pentium, and SpeedStep are trademarks of the
Intel Corporation in the U.S. and/or other countries. All other product names
mentioned herein may be trademarks of their respective companies.
Compaq shall not be liable for technical or editorial errors or omissions
contained herein. The information in this document is provided “as is” without
warranty of any kind and is subject to change without notice. The warranties
for Compaq products are set forth in the express limited warranty statements
accompanying such products. Nothing herein should be construed as
constituting an additional warranty.
Maintenance and Service Guide
Second Edition October 2002
First Edition April 2002
Document Part Number: 268135-002
268135-002.book Page iii Thursday, October 24, 2002 4:10 PM
Contents
1 Product Description
1.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2
1.2 Clearing a Password. . . . . . . . . . . . . . . . . . . . . . . . . . 1–4
1.3 Power Management . . . . . . . . . . . . . . . . . . . . . . . . . . 1–5
1.4 Computer External Components . . . . . . . . . . . . . . . . 1–6
1.5 Design Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–16
2 Troubleshooting
2.1 Computer Setup and Diagnostics Utilities . . . . . . . . . 2–1
Selecting Computer Setup or Compaq Diagnostics . 2–1
Selecting from the File Menu . . . . . . . . . . . . . . . . . . 2–3
Selecting from the Security Menu . . . . . . . . . . . . . . . 2–4
Selecting from the Advanced Menu . . . . . . . . . . . . . 2–5
2.2 Using Compaq Diagnostics . . . . . . . . . . . . . . . . . . . . 2–7
Obtaining, Saving, or Printing
Configuration Information. . . . . . . . . . . . . . . . . . . . . 2–7
Obtaining, Saving, or Printing Diagnostic
Test Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–8
2.3 Troubleshooting Flowcharts. . . . . . . . . . . . . . . . . . . 2–10
3 Illustrated Parts Catalog
3.1 Serial Number Location . . . . . . . . . . . . . . . . . . . . . . . 3–1
3.2 Computer System Major Components . . . . . . . . . . . . 3–2
3.3 Miscellaneous Plastics/Hardware Kit Components . 3–14
3.4 Mass Storage Devices . . . . . . . . . . . . . . . . . . . . . . . 3–16
3.5 Miscellaneous. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–18
Maintenance and Service Guide
iii
268135-002.book Page iv Thursday, October 24, 2002 4:10 PM
Contents
4 Removal and Replacement Preliminaries
4.1 Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.2 Service Considerations. . . . . . . . . . . . . . . . . . . . . . . .
Plastic Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cables and Connectors . . . . . . . . . . . . . . . . . . . . . . .
4.3 Preventing Damage to Removable Drives . . . . . . . . .
4.4 Preventing Electrostatic Damage . . . . . . . . . . . . . . . .
4.5 Packaging and Transporting Precautions . . . . . . . . . .
4.6 Workstation Precautions . . . . . . . . . . . . . . . . . . . . . .
4.7 Grounding Equipment and Methods . . . . . . . . . . . . .
4–1
4–2
4–2
4–2
4–3
4–4
4–4
4–5
4–6
5 Removal and Replacement Procedures
5.1 Serial Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–2
5.2 Disassembly Sequence Chart . . . . . . . . . . . . . . . . . . . 5–2
5.3 Preparing the Computer for Disassembly . . . . . . . . . 5–4
5.4 Computer Feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–9
5.5 Memory Expansion Board . . . . . . . . . . . . . . . . . . . . . 5–9
5.6 Mini PCI Communications Board . . . . . . . . . . . . . . 5–12
5.7 Connector Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–15
5.8 LED Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–16
5.9 Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–18
5.10 Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–22
5.11 Top Cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–26
5.12 Speaker Assembly . . . . . . . . . . . . . . . . . . . . . . . . . 5–31
5.13 Display Release Assembly. . . . . . . . . . . . . . . . . . . 5–33
5.14 TouchPad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–35
5.15 Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–38
5.16 Processor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–40
5.17 Disk Cell RTC Battery . . . . . . . . . . . . . . . . . . . . . . 5–42
5.18 System Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–44
5.19 Modem Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–49
iv
Maintenance and Service Guide
268135-002.book Page v Thursday, October 24, 2002 4:10 PM
Contents
6 Specifications
A Connector Pin Assignments
B Power Cord Set Requirements
3-Conductor Power Cord Set . . . . . . . . . . . . . . . . . . . . . .
General Requirements . . . . . . . . . . . . . . . . . . . . . . . .
Country-Specific Requirements . . . . . . . . . . . . . . . . . . . .
Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B–1
B–1
B–2
B–3
C Screw Listing
Index
Maintenance and Service Guide
v
268135-002.book Page 1 Thursday, October 24, 2002 4:10 PM
1
Product Description
The Compaq Presario 2800 Series Mobile PC and Evo Notebook
N800 Series offer advanced modularity, Intel Mobile Pentium 4
processors with SpeedStep technology with 64-bit architecture,
industry-leading Accelerated Graphics Port (AGP)
implementation, and extensive multimedia support.
Figure 1-1. Compaq Presario 2800 and Evo Notebook N800
Maintenance and Service Guide
1–1
268135-002.book Page 2 Thursday, October 24, 2002 4:10 PM
Product Description
1.1 Features
1–2
■
2.2-, 2.0-, 1.9-, 1.8-, 1.7-, 1.6-, 1.5-, or 1.4-GHz Intel Mobile
Pentium 4 processor with SpeedStep technology, with
256-KB integrated L2 cache, varying by computer model
■
ATI Mobile Radeon 9000 or ATI P7 graphics controller with
32 to 64 MB of shared SDRAM and 4X AGP graphics card,
varying by computer model
■
128-MB high-performance Synchronous DRAM (SDRAM),
expandable to 1.0 GB
■
Microsoft Windows 2000, Windows XP Home, or
Windows XP Professional, varying by computer model
■
15.0-inch UXGA (1600 × 1200), SXGA+ (1400 × 1050), or
XGA (1024 × 768), or 14.1-inch XGA (1024 × 768),
TFT display with over 16.7 million colors, varying by
computer model
■
Full-size Windows 98 keyboard with:
❏
TouchPad pointing device (Presario 2800 and
Evo Notebook N800c models)
❏
TouchPad and point stick (Evo Notebook N800c
models only)
■
Network interface card (NIC) integrated on the system board,
with a mini PCI V.92 modem
■
Integrated wireless support of 802.11b and Bluetooth devices
through MultiPort
■
Support for one Type I or II PC Card slot with support for
both 32-bit CardBus and 16-bit PC Cards
■
External 65 W AC adapter with power cord
■
8-cell lithium ion (Li ion) battery pack
Maintenance and Service Guide
268135-002.book Page 3 Thursday, October 24, 2002 4:10 PM
Product Description
■
60-, 40-, 30-, or 20-GB high-capacity hard drive, varying by
computer model
■
Support for the following drives through the MultiBay:
■
❏
1.44-MB diskette drive
❏
24X Max CD-ROM drive
❏
8X Max CD-RW drive
❏
8X Max DVD-ROM drive
❏
8X Max DVD-CDRW combination drive
❏
40- or 30-GB hard drive
❏
LS-120 drive
❏
8-cell battery pack
Connectors for:
❏
❏
RJ-45 network
RJ-11 modem
Universal Serial Bus
Parallel devices
External monitor
AC power
Stereo line out/headphone
Mono microphone
❏
S-video
❏
Port replicator
❏
Infrared
❏
❏
❏
❏
❏
❏
■
JBL Pro stereo speakers with bass reflex
■
Dolby Digital certified sound
Maintenance and Service Guide
1–3
268135-002.book Page 4 Thursday, October 24, 2002 4:10 PM
Product Description
1.2 Clearing a Password
If the notebook you are servicing has an unknown password,
follow these steps to clear the password. These steps also
clear CMOS:
1. Prepare the computer for disassembly (refer to Section 5.3,
“Preparing the Computer for Disassembly,” for more
information).
2. Remove the RTC battery (refer to Section 5.17, “Disk Cell
RTC Battery”).
3. Wait approximately five minutes.
4. Replace the RTC battery and reassemble the computer.
5. Connect AC power to the computer. Do not reinsert any
battery packs at this time.
6. Turn on the computer.
All passwords and all CMOS settings have been cleared.
1–4
Maintenance and Service Guide
268135-002.book Page 5 Thursday, October 24, 2002 4:10 PM
Product Description
1.3 Power Management
The computer comes with power management features that
extend battery operating time and conserve power. The computer
supports the following power management features:
■
Suspend
■
Hibernation
■
Setting customization by the user
■
Hotkeys for setting level of performance
■
Smart battery that provides an accurate battery power gauge
■
Battery calibration
■
Lid switch Suspend/resume
■
Power/Suspend button
■
Advanced Configuration and Power Management (ACP)
compliance
Maintenance and Service Guide
1–5
268135-002.book Page 6 Thursday, October 24, 2002 4:10 PM
Product Description
1.4 Computer External Components
The external components on the front and right side of the
computer are shown in Figure 1-2 and described in Table 1-6.
.
Figure 1-2. Front and Right Side Components
Table 1-6
Front and Right Side Components
Item
Component
Function
1
Stereo speakers (2)
Produce stereo sound.
2
Power/Suspend light
On: Power is turned on.
Off: Power is turned off.
Blinking: Computer is in Suspend mode.
1–6
Maintenance and Service Guide
268135-002.book Page 7 Thursday, October 24, 2002 4:10 PM
Product Description
Table 1-6
Front and Right Side Components (Continued)
Item
Component
Function
3
Display release latch
Opens the computer.
4
Battery light
On: A battery pack is charging.
Blinking: A battery pack that is the only
available power source has reached a
low-battery condition.
5
Battery bay
Accepts an 8-cell lithium ion (Li ion)
battery pack.
6
Hard drive bay
Supports the removable primary hard drive.
The hard drive is secured to the computer
by one screw.
7
Vent
Allows airflow to cool internal components.
To prevent damage, the computer shuts down if an
Ä CAUTION:
overheating condition occurs. Do not block the cooling vent.
Avoid placing the computer on a blanket, rug, or other flexible
surface that may cover the vent area.
8
Security cable slot
Maintenance and Service Guide
Attaches an optional security cable to the
computer.
1–7
268135-002.book Page 8 Thursday, October 24, 2002 4:10 PM
Product Description
The computer rear panel and left side components are shown in
Figure 1-3 and described in Table 1-7.
Figure 1-3. Rear Panel and Left Side Components
Table 1-7
Rear Panel and Left Side Components
Item
Component
Function
1
Vent
Allows airflow to cool internal components.
CAUTION: To prevent damage, the computer shuts down if an
overheating condition occurs. Do not block the cooling vent.
Avoid placing the computer on a blanket, rug, or other flexible
surface that may cover the vent area.
2
Infrared port
Provides wireless communication between
the computer and another infraredequipped device using an infrared beam.
3
Parallel connector
Connects a parallel device.
1–8
Maintenance and Service Guide
268135-002.book Page 9 Thursday, October 24, 2002 4:10 PM
Product Description
Table 1-7
Rear Panel and Left Side Components (Continued)
Item
Component
Function
4
External monitor
connector
Connects an external monitor or overhead
projector.
5
S-Video connector
Connects a television, VCR, camcorder, or
overhead projector.
6
USB connectors (2)
Connect USB devices.
7
RJ-11 modem jack
Connects the modem cable to an internal
modem. A modem cable is included with
internal modem models.
8
RJ-45 network jack
Connects the network cable. A network
cable is not included with the computer.
9
DC power jack
Connects any one of the following:
■
AC adapter
■
Optional automobile power
adapter/charger
■
Optional aircraft power adapter
10
Mono microphone jack
Connects a mono microphone, disabling the
built-in microphone.
11
Stereo speaker/
headphone jack
Connects stereo speakers, headphones,
headset, or television audio.
12
PC Card slot
Supports a 32-bit (CardBus) or 16-bit PC
Card.
13
PC Card eject button
Ejects a PC Card from the PC Card slot.
14
MultiBay
Accepts MultiBay devices, such as a
diskette drive, optical drive, hard drive,
or optional battery pack.
Maintenance and Service Guide
1–9
268135-002.book Page 10 Thursday, October 24, 2002 4:10 PM
Product Description
The computer keyboard components are shown in Figure 1-4 and
described in Table 1-8.
Figure 1-4. Keyboard Components
Table 1-8
Keyboard Components
Item
Component
Function
1
F1 through F12
Perform preset functions.
function keys
2
1–10
Num lock key
On: Num lock is on and the embedded
numeric keypad is enabled.
Maintenance and Service Guide
268135-002.book Page 11 Thursday, October 24, 2002 4:10 PM
Product Description
Table 1-8
Keyboard Components (Continued)
Item
Component
Function
3
Embedded numeric
keypad
Converts keys to numeric keypad.
4
Cursor control keys
Move the cursor around the screen.
5
Windows application
key
Displays a menu when using a Microsoft
application. The menu is the same one that
is displayed by pressing the right mouse
button.
6
Windows logo keys
Displays the Windows Start menu.
7
Fn key
Used with hotkeys to perform preset hotkey
functions.
Maintenance and Service Guide
1–11
268135-002.book Page 12 Thursday, October 24, 2002 4:10 PM
Product Description
The computer top components are shown in Figure 1-5 and
described in Table 1-9.
Figure 1-5. Top Components
Table 1-9
Top Components
Item
Component
Function
1
Display lid switch
Turns off the computer display if the
computer is closed while on.
2
Power light
On: Power is turned on.
Blinking: Computer is in Suspend mode.
The power light also blinks if a battery pack
that is the only available power source
reaches a low-battery condition.
3
Num lock light
On: Num lock is on and the embedded
numeric keypad is enabled.
4
Easy Access
Buttons (3)
Provide quick access to the Internet. Refer
to the Hardware Guide that ships with the
computer for information about these
buttons.
1–12
Maintenance and Service Guide
268135-002.book Page 13 Thursday, October 24, 2002 4:10 PM
Product Description
Table 1-9
Top Components (Continued)
Item
Component
Function
5
Power button
Turns on the computer. Use the operating
system Shut Down command to turn off the
computer.
6
Digital audio button
Launches Windows Media Player to play
MP3 music.
7
Volume control buttons
Adjust the volume of the stereo speakers.
8
Caps lock light
On: Caps lock is on.
9
Drive indicator light
Turns on when the hard drive, CD-, or
DVD-ROM drive is accessed.
10
Microphone
Allows for audio input.
11
TouchPad
Moves the mouse cursor, selects, and
activates.
12
TouchPad buttons
Function like the left and right mouse
buttons on an external mouse.
13
EasyScroll
Scrolls the screen left, right, up, and down.
14
Battery power light
On: A battery pack is charging.
Blinking: A battery pack that is the only
available power source has reached a
low-battery condition.
15
Power/Suspend light
On: Power is turned on.
Off: Power is turned off.
Blinking: Computer is in Suspend mode.
Maintenance and Service Guide
1–13
268135-002.book Page 14 Thursday, October 24, 2002 4:10 PM
Product Description
The external components on the bottom of the computer are
shown in Figure 1-6 and described in Table 1-10.
Figure 1-6. Bottom Components
Table 1-10
Bottom Components
Item
Component
Function
1
Vent
Allows airflow to cool internal
components.
CAUTION: To prevent damage, the computer shuts down if
an overheating condition occurs. Do not block the cooling
vent. Avoid placing the computer on a blanket, rug, or other
flexible surface that may cover the vent area.
2
Connector cover
Protects the parallel, external
monitor, external keyboard/mouse,
and USB connectors.
3
Docking connector
Connects the computer to an
optional port replicator.
1–14
Maintenance and Service Guide
268135-002.book Page 15 Thursday, October 24, 2002 4:10 PM
Product Description
Table 1-10
Bottom Components (Continued)
Item
Component
Function
4
Mini PCI communications
compartment
Contains the mini PCI modem
card.
5
MultiBay
Accepts a diskette drive, optical
drive, hard drive, or battery pack.
6
MultiBay release switch
Releases the MultiBay device from
the connector.
7
Serial number
Identifies the computer; needed
when you call Compaq customer
support.
8
Memory expansion
compartment
Covers the memory expansion
compartment that contains two
memory expansion slots for
memory expansion boards.
9
Battery pack release switch
Releases the battery pack from
the battery compartment.
10
Battery bay
Accepts an 8-cell lithium ion
(Li ion) battery pack.
11
Hard drive bay
Supports the primary hard drive.
The hard drive is secured to the
computer by one screw.
12
Hard drive retention screw
Secures the hard drive to the
computer.
Maintenance and Service Guide
1–15
268135-002.book Page 16 Thursday, October 24, 2002 4:10 PM
Product Description
1.5 Design Overview
This section presents a design overview of key parts and features
of the computer. Refer to Chapter 3, “Illustrated Parts Catalog,”
to identify replacement parts, and Chapter 5, “Removal and
Replacement Procedures,” for disassembly steps. The system
board provides the following device connections:
■
Memory expansion board
■
Hard drive
■
Display
■
Keyboard/TouchPad or pointing stick
■
Audio
■
Intel Mobile Pentium 4 processors with SpeedStep
technology
■
Fan
■
PC Card
■
Modem or modem/NIC
The computer uses an electrical fan for ventilation. The fan is
controlled by a temperature sensor and is designed to turn on
automatically when high temperature conditions exist. These
conditions are affected by high external temperatures, system
power consumption, power management/battery conservation
configurations, battery fast charging, and software applications.
Exhaust air is displaced through the ventilation grill located on
the left side of the computer.
Ä
1–16
CAUTION: To properly ventilate the computer, allow at least a
3-inch (7.6 cm) clearance on the left and right sides of the
computer.
Maintenance and Service Guide
268135-002.book Page 1 Thursday, October 24, 2002 4:10 PM
2
Troubleshooting
Å
WARNING: Only authorized technicians trained by Compaq should
repair this equipment. All troubleshooting and repair procedures
are detailed to allow only subassembly/module level repair.
Because of the complexity of the individual boards and
subassemblies, no one should attempt to make repairs at the
component level or to make modifications to any printed wiring
board. Improper repairs can create a safety hazard. Any indication
of component replacement or printed wiring board modification may
void any warranty or exchange allowances.
2.1 Computer Setup and Diagnostics
Utilities
Selecting Computer Setup or Compaq
Diagnostics
The computer features two Compaq system management utilities:
■
Computer Setup—A system information and customization
utility that can be used even when your operating system is
not working or will not load. This utility includes settings that
are not available in Windows.
Maintenance and Service Guide
2–1
268135-002.book Page 2 Thursday, October 24, 2002 4:10 PM
Troubleshooting
■
Compaq Diagnostics—A system information and diagnostic
utility that is used within your Windows operating system.
Use this utility whenever possible to:
❏
Display system information.
❏
Test system components.
❏
Troubleshoot a device configuration problem in
Windows 2000, Windows XP Professional, or
Windows XP Home.
is not necessary to configure a device connected to a USB
✎ Itconnector
on the computer or an optional docking base.
Using Computer Setup
Information and settings in Computer Setup are accessed from
the File, Security, or Advanced menus:
1. Turn on or restart the computer. Press F10 while the
F10 = ROM Based Setup message is displayed in the
lower-left corner of the screen.
❏
To change the language, press F2.
❏
To view navigation information, press F1.
❏
To return to the Computer Setup menu, press esc.
2. Select the File, Security, or Advanced menu.
3. To close Computer Setup and restart the computer:
❏
Select File > Save Changes and Exit and press enter.
or
❏
Select File > Ignore Changes and Exit and press enter.
4. When you are prompted to confirm your action, press F10.
2–2
Maintenance and Service Guide
268135-002.book Page 3 Thursday, October 24, 2002 4:10 PM
Troubleshooting
Selecting from the File Menu
Table 2-1
File Menu
Select
To Do This
System Information
■
View identification information about the
computer, a docking base, and any battery
packs in the system.
■
View specification information about the
processor, memory and cache size, and
system ROM.
Save to Floppy
Save system configuration settings to a diskette.
Restore from Floppy
Restore system configuration settings from a
diskette.
Restore Defaults
Replace configuration settings in Computer
Setup with factory default settings. (Identification
information is retained.)
Ignore Changes and Exit
Cancel changes entered during the current
session, then exit and restart the computer.
Save Changes and Exit
Save changes entered during the current
session, then exit and restart the computer.
Maintenance and Service Guide
2–3
268135-002.book Page 4 Thursday, October 24, 2002 4:10 PM
Troubleshooting
Selecting from the Security Menu
Table 2-2
Security Menu
Select
To Do This
Setup Password
Enter, change, or delete a setup password.
(The setup password is called an administrator
password in Compaq Computer Security, a
program accessed from the Windows Control
Panel.)
Power-on Password
Enter, change, or delete a power-on password.
DriveLock Passwords
Enable/disable DriveLock; change a DriveLock
User or Master password.
Settings are accessible only
✎ DriveLock
when you enter Computer Setup by
turning on (not restarting) the computer.
Password Options
Password options can be
selected only when a
power-on password has
been set.
Enable/Disable:
■
QuickLock
■
QuickLock on Suspend
■
QuickBlank
enable QuickLock on Suspend or
✎ To
QuickBlank, you must first enable
QuickLock.
Device Security
Enable/Disable:
■
Ports or diskette drives*
■
Diskette write*
■
CD-ROM or diskette startup
for a DVD-ROM can be
✎ Settings
entered in the CD-ROM field.
System IDs
Enter identification numbers for the computer,
a docking base, and all battery packs in the
system.
*Not applicable to SuperDisk LS-120 drives.
2–4
Maintenance and Service Guide
268135-002.book Page 5 Thursday, October 24, 2002 4:10 PM
Troubleshooting
Selecting from the Advanced Menu
Table 2-3
Advanced Menu
Select
To Do This
Language (or press F2)
Change the Computer Setup language.
Boot Options
Enable/Disable:
Device Options
■
QuickBoot, which starts the computer more
quickly by eliminating some startup tests.
(If you suspect a memory failure and want
to test memory automatically during startup,
disable QuickBoot.)
■
MultiBoot, which sets a startup sequence
that can include most bootable devices and
media in the system.
■
Enable/disable the embedded numeric
keypad at startup.
■
Enable/disable multiple standard pointing
devices at startup. (To set the computer to
support only a single, usually nonstandard,
pointing device at startup, select Disable.)
■
Enable/disable USB legacy support for a
USB keyboard. (When USB legacy support
is enabled, the keyboard works even when a
Windows operating system is not loaded.)
■
Set an optional external monitor or overhead
projector connected to a video card in a
docking base as the primary device. (When
the computer display is set as secondary,
the computer must be shut down before
undocking from a docking base.)
Maintenance and Service Guide
2–5
268135-002.book Page 6 Thursday, October 24, 2002 4:10 PM
Troubleshooting
Table 2-3
Advanced Menu (Continued)
Select
To Do This
Device Options
(continued)
■
Change the parallel port mode from EPP
(Enhanced Parallel Port [default]) to
standard, bidirectional, EPP or ECP
(Enhanced Capabilities Port).
■
Set video-out mode to NTSC (default), PAL,
NTSC-J, or PAL-M.*
■
Enable/disable all settings in the SpeedStep
window. (When Disable is selected, the
computer runs in Battery Optimized mode.)
■
Specify how the computer recognizes
multiple identical docking bases that are
identically equipped. (Select Disable to
recognize the docking bases as a single
docking base; select Enable to recognize
the docking bases individually, by serial
number.)
■
Enable/disable the reporting of the
processor serial number by the processor to
the software.
HDD Self Test Options
Run a quick comprehensive self test on hard
drives in the system that support the test
features.
*Video modes vary even within regions. However, NTSC is common in North
America; PAL, in Europe, Africa, and the Middle East; NTSC-J, in Japan; and
PAL-M, in Brazil. Other South and Central American regions may use NTSC,
PAL, or PAL-M.
2–6
Maintenance and Service Guide
268135-002.book Page 7 Thursday, October 24, 2002 4:10 PM
Troubleshooting
2.2 Using Compaq Diagnostics
When you access Compaq Diagnostics, a scan of all system
components is displayed on the screen before the Compaq
Diagnostics window opens.
You can display more or less information from anywhere within
Compaq Diagnostics by selecting Level on the menu bar.
Compaq Diagnostics is designed to test Compaq components.
If non-Compaq components are tested, the results may be
inconclusive.
Obtaining, Saving, or Printing
Configuration Information
1. Access Compaq Diagnostics by selecting Start > Settings >
Control Panel > Compaq Diagnostics.
2. Select Categories, then select a category from the drop-down
list.
❏
To save the information, select File > Save As.
❏
To print the information, select File > Print.
3. To close Compaq Diagnostics, select File > Exit.
Maintenance and Service Guide
2–7
268135-002.book Page 8 Thursday, October 24, 2002 4:10 PM
Troubleshooting
Obtaining, Saving, or Printing Diagnostic
Test Information
1. Access Compaq Diagnostics by selecting Start > Settings >
Control Panel > Compaq Diagnostics.
2. Select the Test tab.
3. In the scroll box, select the category or device you want
to test.
4. Select a test type:
2–8
❏
Quick Test—Runs a quick, general test on each device in
a selected category.
❏
Complete Test—Performs maximum testing on each
device in a selected category.
❏
Custom Test—Performs maximum testing on a selected
device.
◆
To run all tests for your selected device, select the
Check All button.
◆
To run only the tests you select, select the Uncheck
All button, then select the checkbox for each test you
want to run.
Maintenance and Service Guide
268135-002.book Page 9 Thursday, October 24, 2002 4:10 PM
Troubleshooting
5. Select a test mode:
❏
Interactive Mode—Provides maximum control over the
testing process. You determine whether the test was
passed or failed and may be prompted to insert or remove
devices.
❏
Unattended Mode—Does not display prompts. If errors
are found, they are displayed when testing is complete.
6. Select the Begin Testing button.
7. Select a tab to view a test report:
❏
Status tab—Summarizes the tests run, passed, and failed
during the current testing session.
❏
Log tab—Lists tests run on the system, the number of
times each test has run, the number of errors found on
each test, and the total run time of each test.
❏
Error tab—Lists all errors found in the computer with
their error codes.
8. Select a tab to save the report:
❏
Log tab—Select the Log tab Save button.
❏
Error tab—Select the Error tab Save button.
9. Select a tab to print the report:
❏
Log tab—Select File > Save As, then print the file from
your folder.
Maintenance and Service Guide
2–9
268135-002.book Page 10 Thursday, October 24, 2002 4:10 PM
Troubleshooting
2.3 Troubleshooting Flowcharts
Table 2-4
Troubleshooting Flowcharts Overview
Flowchart
Description
2.1
Initial troubleshooting
2.2
No power, part 1
2.3
No power, part 2
2.4
No power, part 3
2.5
No power, part 4
2.6
No video, part 1
2.7
No video, part 2
2.8
Nonfunctioning docking station
2.9
No operating system (OS) loading
2.10
No OS loading from hard drive, part 1
2.11
No OS loading from hard drive, part 2
2.12
No OS loading from hard drive, part 3
2.13
No OS loading from diskette drive
2.14
No OS loading from CD- or DVD-ROM drive
2.15
No audio, part 1
2.16
No audio, part 2
2.17
Nonfunctioning device
2.18
Nonfunctioning keyboard
2.19
Nonfunctioning pointing device
2.20
No network or modem connection
2–10
Maintenance and Service Guide
268135-002.book Page 11 Thursday, October 24, 2002 4:10 PM
Troubleshooting
Flowchart 2.1—Initial Troubleshooting
Begin
troubleshooting.
N
Go to
Section 2.2,
No Power.
Is there
power?
Y
N
Check
LED board,
speaker
connections.
Beeps,
LEDs, or error
messages?
N
Y
Go to
Section 2.17,
Nonfunctioning
Device.
All drives
working?
N
Y
Go to
Section 2.6,
No Video.
Is there video?
(no boot)
N
Y
N
Y
Go to
Section 2.9,
No OS Loading.
Is the OS
loading?
N
Connecting
to network
or modem?
Y
N
Is there
sound?
Keyboard/
pointing
device
working?
Go to
Section 2.18,
Nonfunctioning
Keyboard,
or Section 2.19,
Nonfunctioning
Pointing Device.
Go to
Section 2.20,
No Network or
Modem.
Y
Go to
Section 2.15,
No Audio.
Y
Maintenance and Service Guide
End
2–11
268135-002.book Page 12 Thursday, October 24, 2002 4:10 PM
Troubleshooting
Flowchart 2.2—No Power, Part 1
No Power
(power LED
is off).
Remove from
docking station
(if applicable).
N
N
Power up
on battery
power?
Go to
Section 2.3,
No Power,
Part 2.
Power up
on battery
power?
*Reset
power.
Y
Y
N
N
Power up
on AC
power?
Power up
on AC
power?
*Reset
power.
Y
Go to
Section 2.4,
No Power,
Part 3.
Y
Y
Power up
in docking
station?
Done
N
1. Reseat the power cables in the docking
station and at the AC outlet.
2. Ensure the AC power source is active.
3. Ensure that the power strip is working.
Y
Done
2–12
*NOTES:
1. On some models there is a separate
reset button.
2. On some models the computer may be
reset using the Suspend switch and
either the lid switch or the main power
switch.
N
Power up
in docking
station?
Go to
Section 2.8,
Nonfunctioning
Docking Station.
Maintenance and Service Guide
268135-002.book Page 13 Thursday, October 24, 2002 4:10 PM
Troubleshooting
Flowchart 2.3—No Power, Part 2
Continued from
Section 2.2,
No Power, Part 1.
Visually check for
debris in battery
socket and clean
if necessary.
Y
Power on?
Done
N
Check battery by
recharging,
moving it to
another computer,
or replacing it.
N
Replace
power supply
(if applicable).
Power on?
Y
N
Done
Power on?
Go to
Section 2.4,
No Power,
Part 3.
Y
Done
Maintenance and Service Guide
2–13
268135-002.book Page 14 Thursday, October 24, 2002 4:10 PM
Troubleshooting
Flowchart 2.4—No Power, Part 3
Continued from
Section 2.3,
No Power, Part 2.
Plug directly
into AC outlet.
Y
Power LED
on?
Done
N
Reseat AC adapter
in computer and
at power source.
Y
Power on?
Done
N
N
External
Try different
outlet.
Power outlet
active?
Y
Internal or
external AC
adapter?
N
Internal
Go to
Section 2.5,
No Power,
Part 4.
Replace
power cord.
Power on?
Y
Y
Power on?
Replace external
AC adapter.
Done
Done
N
2–14
Maintenance and Service Guide
268135-002.book Page 15 Thursday, October 24, 2002 4:10 PM
Troubleshooting
Flowchart 2.5—No Power, Part 4
Continued from
Section 2.4,
No Power, Part 3.
Open
computer.
Y
Loose or
damaged
parts?
N
Reseat loose
components and
boards and
replace damaged
items.
Close
computer and
retest.
N
Power on?
Replace the following items (if applicable).
Check computer operation after each
replacement:
1. Internal DC-DC converter*
2. Internal AC adapter
3. Processor board*
4. System board*
Y
Done
*NOTE: Replace these items as a set to
prevent shorting out among components.
Maintenance and Service Guide
2–15
268135-002.book Page 16 Thursday, October 24, 2002 4:10 PM
Troubleshooting
Flowchart 2.6—No Video, Part 1
No Video.
Docking
Station
*NOTE: To change from internal to
external display, use the hotkey
combination.
Go to
Section 2.7,
No Video, Part 2.
Stand-alone
or Docking
Station?
Stand-alone
Internal or
external
display*?
Y
Adjust
brightness.
A
Adjust
brightness.
Press lid
switch to ensure
operation.
Y
Video OK?
Done
N
Internal
External
Video OK?
Y
Done
Video OK?
Done
N
N
Replace the following one at a time. Test after each replacement.
1. Cable between notebook and computer display (if applicable)
2. Inverter board (if applicable)
3. Display
4. System board
Check for bent
pins on cable.
N
Video OK?
Y
Try
another
display.
Internal and
external
video OK?
Replace
system
board.
Y
Done
2–16
N
Done
Maintenance and Service Guide
268135-002.book Page 17 Thursday, October 24, 2002 4:10 PM
Troubleshooting
Flowchart 2.7—No Video, Part 2
Continued from
Section 2.6,
No Video, Part 1.
Remove
notebook from
docking station,
if connected.
Adjust
display
brightness.
Check brightness
of external
monitor.
N
Y
Go to “A” in
Section 2.6,
No Video, Part 1.
Video OK?
Y
Video OK?
Done
N
Check that notebook is properly
seated in docking station, for
bent pins on cable, and for
monitor connection.
Try another
external
monitor.
Y
Video OK?
Y
Internal
and external
video OK?
Done
N
Done
N
Adjust external
monitor display.
Maintenance and Service Guide
Go to Section 2.8,
Nonfunctioning
Docking Station.
2–17
268135-002.book Page 18 Thursday, October 24, 2002 4:10 PM
Troubleshooting
Flowchart 2.8—Nonfunctioning Docking Station
(if applicable)
Nonfunctioning
Docking Station.
Reseat power
cord in docking
station and
power outlet.
Check voltage
setting on
docking station.
Reinstall
notebook into
docking station.
Y
Reset monitor
cable connector at
docking station.
Docking
station
operating?
Done
N
Y
Docking
station
operating?
N
Remove
notebook, reseat
all internal parts,
and replace any
damaged items in
docking station.
2–18
Done
Replace the following docking station
components one at a time. Check
computer operation after each
replacement.
1. Power supply
2. I/O board
3. Backplane board
4. Switch box
5. Docking motor mechanism
Maintenance and Service Guide
268135-002.book Page 19 Thursday, October 24, 2002 4:10 PM
Troubleshooting
Flowchart 2.9—No Operating System (OS) Loading
No OS
Loading.*
Reseat power
cord in docking
station and
power outlet.
No OS loading
from hard drive,
go to
Section 2.10.
No OS loading
from diskette
drive, go to
Section 2.13.
No OS loading
from CD- or
DVD-ROM drive,
go to
Section 2.14.
No OS loading
from network,
go to
Section 2.20.
*NOTE: Before beginning troubleshooting,
always check cable connections, cable
ends, and drives for bent or damaged pins.
Maintenance and Service Guide
2–19
268135-002.book Page 20 Thursday, October 24, 2002 4:10 PM
Troubleshooting
Flowchart 2.10—No OS Loading from Hard Drive, Part 1
OS not
loading from
hard drive.
Y
Nonsystem
disk message?
N
Go to
Section 2.11,
No OS Loading
from Hard Drive,
Part 2.
Reseat
external
hard drive.
Y
OS loading?
Done
N
N
Boot
from
CD?
N
Y
Boot
from
diskette?
Check the setup
utility for correct
booting order.
Y
N
Go to
Section 2.13,
No OS
Loading from
Diskette Drive.
Change boot
priority through
the setup utility
and reboot.
Boot
from
hard drive?
N
Y
Boot
from
hard drive?
Done
Go to
Section 2.17,
Nonfunctioning
Device.
Y
2–20
Maintenance and Service Guide
268135-002.book Page 21 Thursday, October 24, 2002 4:10 PM
Troubleshooting
Flowchart 2.11—No OS Loading from Hard Drive, Part 2
Continued from
Section 2.10,
No OS Loading
from Hard Drive,
Part 1.
Reseat
hard drive.
N
1. Replace hard
drive.
2. Replace system
board.
CD or
diskette in
drive?
Y
Hard drive
accessible?
Y
Done
N
Remove
diskette and
reboot.
Run FDISK.
Y
Boot
from
hard drive?
N
Done
N
Create partition,
then format hard
drive to bootable
C:\ prompt.
Hard drive
partitioned?
Y
N
Boot
from diskette
drive?
Y
N
Go to
Section 2.13,
No OS Loading
from Diskette
Drive.
Hard drive
formatted?
Y
Format hard drive
and bring to
a bootable
C:\ prompt.
N
Y
Hard drive
accessible?
Y
Computer
booted?
Done
Go to
Section 2.12,
No OS Loading
from Hard Drive,
Part 3.
Maintenance and Service Guide
N
Load OS using
Restore CD
(if applicable).
Go to
Section 2.12,
No OS Loading
from Hard Drive,
Part 3.
2–21
268135-002.book Page 22 Thursday, October 24, 2002 4:10 PM
Troubleshooting
Flowchart 2.12—No OS Loading from Hard Drive, Part 3
Continued from
Section 2.11,
No OS Loading
from Hard Drive,
Part 2.
N
System
files on hard
drive?
Install OS
and reboot.
Y
Y
Y
Virus
on hard
drive?
OS
loading from
hard drive?
Clean virus.
N
Done
N
Y
Run SCANDISK
and check for
bad sectors.
Diagnostics
on diskette?
Replace
hard drive.
N
N
Can bad
sectors
be fixed?
Run diagnostics
and follow
recommendations.
Replace
hard drive.
Y
N
Boot from
hard drive?
Fix bad
sectors.
Replace
hard drive.
Y
Done
2–22
Maintenance and Service Guide
268135-002.book Page 23 Thursday, October 24, 2002 4:10 PM
Troubleshooting
Flowchart 2.13—No OS Loading from Diskette Drive
Y
OS not loading
from
diskette drive.
Reseat
diskette drive.
OS
loading?
Done
N
N
Y
Bootable
diskette
in drive?
Nonsystem
disk message?
N
Install bootable
diskette and
reboot computer.
Y
N
Go to
Section 2.17,
Nonfunctioning
Device.
Boot
from another
device?
Check diskette
for system files.
Try different
diskette.
Y
N
Diskette
drive enabled
in the setup
utility?
Y
Enable drive
and cold boot
computer.
Y
1. Replace
diskette drive.
2. Replace system
board.
Nonsystem
disk error?
N
Y
Diskette
drive boot
order?
N
Change boot
priority using
the setup utility.
Clear CMOS.
Refer to Section
1.2, “Clearing a
Password,” for
instructions.
Y
OS
loading?
Done
N
Go to
Section 2.17,
Nonfunctioning
Device.
Maintenance and Service Guide
2–23
268135-002.book Page 24 Thursday, October 24, 2002 4:10 PM
Troubleshooting
Flowchart 2.14—No OS Loading from CD- or
DVD-ROM Drive
Y
No OS
Loading from
CD- or
DVD-ROM Drive.
N
Bootable
disc in
drive?
Disc
in drive?
Y
N
Install
bootable disc.
Install bootable
disc and
reboot
computer.
Try another
bootable disc.
Y
Boots from
CD or DVD?
Done
N
Y
Reseat
drive.
Boots from
CD or DVD?
Done
N
N
Booting
from another
device?
Y
Y
Booting
order
correct?
N
Go to
Section 2.17,
Nonfunctioning
Device.
Clear CMOS.
Refer to Section
1.2, “Clearing a
Password,” for
instructions.
Go to
Section 2.17,
Nonfunctioning
Device.
Correct boot
order using
the setup utility.
2–24
Maintenance and Service Guide
268135-002.book Page 25 Thursday, October 24, 2002 4:10 PM
Troubleshooting
Flowchart 2.15—No Audio, Part 1
Y
Turn up audio
internally or
externally.
No Audio.
Audio?
Done
N
N
Y
Notebook in
docking station
(if applicable)?
N
Go to
Section 2.16,
No Audio, Part 2.
Internal
audio?
Undock
Y
Replace the following docking station
components one at a time as applicable.
Check after each change.
Go to
Section 2.16,
No Audio, Part 2.
1. Reseat docking station audio cable.
2. Replace audio cable.
3. Replace speaker.
4. Replace docking station audio board.
5. Replace backplane board.
6. Replace I/O board.
Y
Go to
Section 2.17,
Nonfunctioning
Device.
Audio?
Done
N
Maintenance and Service Guide
2–25
268135-002.book Page 26 Thursday, October 24, 2002 4:10 PM
Troubleshooting
Flowchart 2.16—No Audio, Part 2
Continued from
Section 2.15,
No Audio, Part 1.
N
Audio
driver in OS
configured?
Reload
audio drivers.
Y
N
Correct
drivers for
application?
Load drivers and
set configuration
in OS.
Y
Connect to
external
speaker.
N
Audio?
Y
Replace audio
board and
speaker
connections
in notebook
(if applicable).
Y
Audio?
Done
N
1. Replace internal speakers.
2. Replace audio board (if applicable).
3. Replace system board.
2–26
Maintenance and Service Guide
268135-002.book Page 27 Thursday, October 24, 2002 4:10 PM
Troubleshooting
Flowchart 2.17—Nonfunctioning Device
Nonfunctioning
Device.
Reseat
device.
Unplug the nonfunctioning device from
the notebook, inspect cables and plugs for
bent or broken pins or other damage.
Y
Clear
CMOS.
Any physical
device detected?
Fix or
replace
broken item.
Possible bad
hard drive.
Replace drive.
Go to
Section 2.9,
No OS Loading.
N
Reattach device.
Close notebook,
plug in power,
and reboot.
N
Device
boots
properly?
Y
Done
Maintenance and Service Guide
N
Possible bad NIC.
Replace card.
If integrated NIC,
replace system
board.
Possible bad
diskette drive.
Replace drive.
Device
boots
properly?
Y
Done
2–27
268135-002.book Page 28 Thursday, October 24, 2002 4:10 PM
Troubleshooting
Flowchart 2.18—Nonfunctioning Keyboard
Keyboard
not operating
properly.
Connect notebook
to good external
keyboard.
N
External
device
works?
Replace
system
board.
Y
Reseat internal
keyboard
connector
(if applicable).
N
Replace internal
keyboard or
cable.
OK?
Y
Y
OK?
Done
Done
N
Replace
system
board.
2–28
Maintenance and Service Guide
268135-002.book Page 29 Thursday, October 24, 2002 4:10 PM
Troubleshooting
Flowchart 2.19—Nonfunctioning Pointing Device
Pointing device
not operating
properly.
Connect notebook
to good external
pointing device.
N
Replace
system
board.
External
device
works?
Y
Reseat internal
pointing device
connector
(if applicable).
N
Replace internal
pointing device
or cable.
OK?
Y
Y
OK?
Done
Done
N
Replace
system
board.
Maintenance and Service Guide
2–29
268135-002.book Page 30 Thursday, October 24, 2002 4:10 PM
Troubleshooting
Flowchart 2.20—No Network or Modem Connection
No network
or modem
connection.
N
Replace jack
or have jack
activated.
Network
or modem
jack active?
Y
Y
Connect
to nondigital
line.
Digital
line?
N
N
NIC/modem
configured
in OS?
Y
Reload
drivers and
reconfigure.
Done
OK?
N
Y
Disconnect all
power from
the notebook
and open.
Replace
NIC/modem
(if applicable).
Y
Reseat
NIC/modem
(if applicable).
OK?
Done
N
Replace
system
board.
2–30
Maintenance and Service Guide
268135-002.book Page 1 Thursday, October 24, 2002 4:10 PM
3
Illustrated Parts Catalog
This chapter provides an illustrated parts breakdown and a
reference for spare part numbers and option part numbers.
3.1 Serial Number Location
When ordering parts or requesting information, provide the
computer serial number and model number located on the bottom
of the computer (Figure 3-1).
Figure 3-1. Serial Number Location
Maintenance and Service Guide
3–1
268135-002.book Page 2 Thursday, October 24, 2002 4:10 PM
Illustrated Parts Catalog
3.2 Computer System Major Components
Figure 3-2. Computer System Major Components
3–2
Maintenance and Service Guide
268135-002.book Page 3 Thursday, October 24, 2002 4:10 PM
Illustrated Parts Catalog
Table 3-1
Spare Parts: Computer System Major Components
Item
Description
1
Displays
Contain parts with carbon finish for use with
Evo Notebook N800c, N800v, and N800w models
15-inch, UXGA
15-inch, SXGA+
15-inch, XGA
14-inch, XGA
Contain parts with silver finish for use with
Presario 2800 models
15-inch, UXGA
15-inch, SXGA+
15-inch, XGA
14-inch, XGA
MultiPort cover
Maintenance and Service Guide
Spare Part
Number
286872-001
286871-001
286870-001
286869-001
285265-001
285264-001
285263-001
285262-001
289037-001
3–3
268135-002.book Page 4 Thursday, October 24, 2002 4:10 PM
Illustrated Parts Catalog
Figure 3-2. Computer System Major Components
3–4
Maintenance and Service Guide
268135-002.book Page 5 Thursday, October 24, 2002 4:10 PM
Illustrated Parts Catalog
Table 3-1
Spare Parts: Computer System Major Components (Continued)
Item
Spare Part
Number
Description
Miscellaneous Plastics/Hardware Kit
Contains parts with silver finish for use with
Presario 2800 models
Contains parts with carbon finish for use with
Evo Notebook N800c, N800v, and N800w models
Includes:
2a
2b
2c
2d
2e
2f
2g
2h
2i
2j
2k
2l
2m
3
Left hinge cover
Right hinge cover
PC Card bezel
PC Card slot space saver
Keyboard shield
TouchPad bracket
Display assembly release
Left display support
Fan channel
Right display support
Connector cover
Mini PCI compartment cover
Memory expansion
compartment cover
LED cover
Maintenance and Service Guide
285261-001
286868-001
not illustrated:
Computer feet
MultiBay weight saver
Docking connector cover
288503-001
3–5
268135-002.book Page 6 Thursday, October 24, 2002 4:10 PM
Illustrated Parts Catalog
Figure 3-2. Computer System Major Components
3–6
Maintenance and Service Guide
268135-002.book Page 7 Thursday, October 24, 2002 4:10 PM
Illustrated Parts Catalog
Table 3-1
Spare Parts: Computer System Major Components (Continued)
Spare Part
Number
Item
Description
4
Keyboards (for use with TouchPad models only)
Arabic
Belgian
Brazilian
Chinese
Czech
Danish
French
French
Canadian
German
Greek
Hebrew
Hungarian
International
Italian
285280-171
285280-181
285280-201
285280-AA1
285280-221
285280-081
285280-051
285280-121
285280-041
285280-151
285280-BB1
285280-211
285280-002
285280-061
Korean
Latin American
Spanish
Norwegian
Portuguese
Russian
Slovakian
Spanish
Swedish
Swiss
Taiwanese
Thai
Turkish
U.K. English
U.S. English
285280-AD1
Latin American
Spanish
Norwegian
Portuguese
Russian
Slovakian
Spanish
Swedish
Swiss
Taiwanese
Thai
Turkish
U.K. English
U.S. English
285281-161
285280-161
285280-091
285280-131
285280-251
285280-231
285280-071
285280-101
285280-111
285280-AB1
285280-281
285280-141
285280-031
285280-001
Keyboards with pointing stick
Arabic
Belgian
Brazilian
Czech
Danish
French
French
Canadian
German
Greek
Hebrew
Hungarian
International
Italian
Korean
285281-171
285281-181
285281-201
285281-221
285281-081
285281-051
285281-121
285281-041
285281-151
285281-BB1
285281-211
285281-002
285281-061
285281-AD1
Maintenance and Service Guide
285281-091
285281-131
285281-251
285281-231
285281-071
285281-101
285281-111
285281-AB1
285281-281
285281-141
285281-031
285281-001
3–7
268135-002.book Page 8 Thursday, October 24, 2002 4:10 PM
Illustrated Parts Catalog
Figure 3-2. Computer System Major Components
3–8
Maintenance and Service Guide
268135-002.book Page 9 Thursday, October 24, 2002 4:10 PM
Illustrated Parts Catalog
Table 3-1
Spare Parts: Computer System Major Components (Continued)
Item
Description
5
Top cover
for Dual Point (TouchPad and Point Stick)
for TouchPad only (silver finish for use with
Presario 2800 models)
for TouchPad only (carbon finish for use with
Evo Notebook N800c, N800v, and N800w
models)
6
285256-001
285257-001
295699-001
Hard drives
60 GB
40 GB
40 GB (does not include hard drive bezel)
30 GB
20 GB
7
Spare Part
Number
285277-001
285276-001
301245-001
285275-001
285274-001
Hard drive bezels
Hard drive bezel with silver finish for use with
Presario 2800 models
Hard drive bezel with carbon finish for use with
Evo Notebook N800c, N800v, and N800w models
8
TouchPad
9
TouchButton boards
for Dual Point (TouchPad and Point Stick)
for TouchPad only
286874-001
286875-001
285258-001
285259-001
285260-001
10
Speaker assembly
285266-001
11
Fan
285267-001
12
Disk cell RTC battery
198718-001
Maintenance and Service Guide
3–9
268135-002.book Page 10 Thursday, October 24, 2002 4:10 PM
Illustrated Parts Catalog
Figure 3-2. Computer System Major Components
3–10
Maintenance and Service Guide
268135-002.book Page 11 Thursday, October 24, 2002 4:10 PM
Illustrated Parts Catalog
Table 3-1
Spare Parts: Computer System Major Components (Continued)
Item
Description
13
Processors
Intel Mobile Pentium 4 with SpeedStep technology
2.2-GHz processor
2.0-GHz processor
1.9-GHz processor
1.8-GHz processor
1.7-GHz processor
1.6-GHz processor
1.5-GHz processor
1.4-GHz processor
308420-001
305075-001
305074-001
285295-001
285294-001
285293-001
285292-001
285291-001
Intel Mobile Pentium 4 (non-SpeedStep technology)
1.6-GHz processor
1.5-GHz processor
306704-001
306703-001
Miscellaneous Cable Kit, includes:
14a
15
16
Spare Part
Number
285268-001
Modem cable
System boards (do not contain memory)
with the ATI Mobile Radeon 9000 graphics controller
64-MB of video memory
32-MB of video memory
310784-001
310783-001
with the ATI P7 graphics controller
64-MB of video memory
32-MB of video memory
285254-001
285253-001
Battery pack, 8 cell, 4.0 AH, 62 WH
281234-001
Maintenance and Service Guide
3–11
268135-002.book Page 12 Thursday, October 24, 2002 4:10 PM
Illustrated Parts Catalog
Figure 3-2. Computer System Major Components
3–12
Maintenance and Service Guide
268135-002.book Page 13 Thursday, October 24, 2002 4:10 PM
Illustrated Parts Catalog
Table 3-1
Spare Parts: Computer System Major Components (Continued)
Item
Description
17
Battery bezels
Battery bezel with silver finish for use with
Presario 2800 models
Battery bezel with carbon finish for use with
Evo Notebook N800c, N800v, and N800w models
18
285278-001
285282-001
301244-001
285284-001
285283-001
301294-001
285285-001
285279-001
281235-001
285255-001
286867-001
Mini PCI communications boards
modem, type III, mini PCI, 56 Kbps (United States)
modem, type III, mini PCI, 56 Kbps (International)
21
286877-001
Base enclosures (includes shield)
with silver finish (Presario 2800 models only)
with carbon finish (Evo Notebook N800c, N800v,
and N800w models)
20
286876-001
MultiBay devices
Diskette drive
24X Max CD-ROM drive
16X Max CD-RW drive
8X Max CD-RW drive
8X Max DVD-ROM drive
24X Max DVD-ROM/CD-RW combination drive
8X Max DVD-ROM/CD-RW combination drive
LS-120 drive
Battery pack
19
Spare Part
Number
285286-001
285287-002
Memory expansion boards
512 MB
256 MB
128 MB
Maintenance and Service Guide
285273-001
285272-001
285271-001
3–13
268135-002.book Page 14 Thursday, October 24, 2002 4:10 PM
Illustrated Parts Catalog
3.3 Miscellaneous Plastics/Hardware
Kit Components
Figure 3-3. Miscellaneous Plastics/Hardware
Kit Components
3–14
Maintenance and Service Guide
268135-002.book Page 15 Thursday, October 24, 2002 4:10 PM
Illustrated Parts Catalog
Table 3-2
Miscellaneous Plastics/Hardware Kit Components
Spare Part Number 285261-001
(contains parts with silver finish for use with Presario 2800 models)
Spare Part Number 286868-001
(contains parts with carbon finish for use with
Evo Notebook N800c, N800v, and N800w models)
Item
Description
Item
Description
1
Left hinge cover
9
Right display support
2
Right hinge cover
10
Connector cover
3
PC Card bezel
11
TouchPad bracket
4
PC Card slot space saver
12
Mini PCI compartment cover
5
Keyboard shield
13
Memory expansion
compartment cover
6
Display release assembly
14
Computer feet (5)
7
Left display support
15
MultiBay weight saver
8
Fan channel
16
Docking connector cover
Maintenance and Service Guide
3–15
268135-002.book Page 16 Thursday, October 24, 2002 4:10 PM
Illustrated Parts Catalog
3.4 Mass Storage Devices
Figure 3-4. Mass Storage Devices
3–16
Maintenance and Service Guide
268135-002.book Page 17 Thursday, October 24, 2002 4:10 PM
Illustrated Parts Catalog
l
Table 3-3
Mass Storage Devices
Item
Description
1
Optical drives
24X Max CD-ROM drive
16X Max CD-RW drive
8X Max CD-RW drive
8X Max DVD-ROM drive
24X Max DVD-ROM/CD-RW combination drive
8X Max DVD-ROM/CD-RW combination drive
2
285282-001
301244-001
285284-001
285283-001
301294-001
285285-001
Hard drives
60 GB
40 GB
40 GB (does not include hard drive bezel)
30 GB
20 GB
3
Spare Part
Number
Diskette drive
Maintenance and Service Guide
285277-001
285276-001
301245-001
285275-001
285274-001
285278-001
3–17
268135-002.book Page 18 Thursday, October 24, 2002 4:10 PM
Illustrated Parts Catalog
3.5 Miscellaneous
Table 3-4
Spare Parts: Miscellaneous (not illustrated)
Spare Part
Number
Description
AC adapters
90 watt
65 watt
287515-001
285288-001
Advanced Port Replicator
288502-001
Bluetooth MultiPort Module with cover
288504-001
802.11b Wireless Local Area Network (LAN) MultiPort
Module with cover
286873-001
Common Port Replicator
285289-001
Logo Kit
288501-001
Power cord, 2-wire
Australian
Chinese
International
3–18
174120-011
174120-AA1
174120-002
Swiss
U.K. English
U.S. English
174120-115
174120-031
174120-001
Maintenance and Service Guide
268135-002.book Page 19 Thursday, October 24, 2002 4:10 PM
Illustrated Parts Catalog
Table 3-4
Spare Parts: Miscellaneous (not illustrated) (Continued)
Spare Part
Number
Description
Power cord, 3-wire
Australian
Chinese
International
Italian
Japanese
198723-011
198723-AA1
198723-B31
198723-061
198723-291
Korean
Swedish
Swiss
Taiwanese
U.K. English
U.S. English
Screw Kit (includes the following screws; refer to Appendix C,
“Screw Listing,” for more information on screw specifications
and usage.)
198723-AD1
198723-101
198723-BG1
198723-AB1
198723-031
198723-001
285290-001
■
Phillips M3.0 × 4.0
■
Phillips M2.0 × 8.0
■
Phillips M2.5 × 9.0
■
Phillips M2.0 × 5.5
■
Phillips M2.0 × 10.0
■
Phillips M2.0 × 4.0
Maintenance and Service Guide
3–19
268135-002.book Page 1 Thursday, October 24, 2002 4:10 PM
4
Removal and Replacement
Preliminaries
This chapter provides essential information for proper and safe
removal and replacement service.
4.1 Tools Required
You will need the following tools to complete the removal and
replacement procedures:
■
Magnetic screwdriver
■
Phillips P0 screwdriver
■
Tool kit (includes connector removal tool, loopback plugs,
and case utility tool)
Maintenance and Service Guide
4–1
268135-002.book Page 2 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Preliminaries
4.2 Service Considerations
The following sections include some of the considerations that
you should keep in mind during disassembly and assembly
procedures.
you remove each subassembly from the computer, place the
✎ As
subassembly (and all accompanying screws) away from the work
area to prevent damage.
Plastic Parts
Using excessive force during disassembly and reassembly can
damage plastic parts. Use care when handling the plastic parts.
Apply pressure only at the points designated in the maintenance
instructions.
Cables and Connectors
Cables must be handled with extreme care to avoid damage.
Apply only the tension required to unseat or seat the cables
during removal and insertion. Handle cables by the connector
whenever possible. In all cases, avoid bending, twisting, or
tearing cables. Ensure that cables are routed in such a way that
they cannot be caught or snagged by parts being removed or
replaced. Handle flex cables with extreme care; these cables
tear easily.
Ä
4–2
CAUTION: When servicing the computer, ensure that cables are
placed in their proper locations during the reassembly process.
Improper cable placement can damage the computer.
Maintenance and Service Guide
268135-002.book Page 3 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Preliminaries
4.3 Preventing Damage to
Removable Drives
Removable drives are fragile components that must be handled
with care. To prevent damage to the computer, damage to a
removable drive, or loss of information, observe the following
precautions:
■
Before removing or inserting a hard drive, shut down the
computer. If you are unsure whether the computer is off or in
Hibernation, turn the computer on, then shut it down.
■
Before removing a diskette drive or optical drive, ensure that
a diskette or disc is not in the drive. Ensure that the optical
drive tray is closed.
■
Before handling a drive, ensure that you are discharged of
static electricity. While handling a drive, avoid touching the
connector.
■
Handle drives on surfaces that have at least one inch of
shock-proof foam.
■
Avoid dropping drives from any height onto any surface.
■
After removing a hard drive, CD-ROM drive, or a diskette
drive, place it in a static-proof bag.
■
Avoid exposing a hard drive to products that have magnetic
fields, such as monitors or speakers.
■
Avoid exposing a drive to temperature extremes or to liquids.
■
If a drive must be mailed, place the drive in a bubble pack
mailer or other suitable form of protective packaging and
label the package “Fragile: Handle With Care.”
Maintenance and Service Guide
4–3
268135-002.book Page 4 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Preliminaries
4.4 Preventing Electrostatic Damage
Many electronic components are sensitive to electrostatic
discharge (ESD). Circuitry design and structure determine the
degree of sensitivity. Networks built into many integrated circuits
provide some protection, but in many cases the discharge contains
enough power to alter device parameters or melt silicon junctions.
A sudden discharge of static electricity from a finger or other
conductor can destroy static-sensitive devices or microcircuitry.
Often the spark is neither felt nor heard, but damage occurs.
An electronic device exposed to electrostatic discharge may not
be affected at all and can work perfectly throughout a normal
cycle. Or the device may function normally for a while, then
degrade in the internal layers, reducing its life expectancy.
4.5 Packaging and Transporting
Precautions
Use the following grounding precautions when packaging and
transporting equipment:
4–4
■
To avoid hand contact, transport products in static-safe
containers, such as tubes, bags, or boxes.
■
Protect all electrostatic-sensitive parts and assemblies with
conductive or approved containers or packaging.
■
Keep electrostatic-sensitive parts in their containers until the
parts arrive at static-free workstations.
■
Place items on a grounded surface before removing items
from their containers.
■
Always be properly grounded when touching a sensitive
component or assembly.
Maintenance and Service Guide
268135-002.book Page 5 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Preliminaries
■
Store reusable electrostatic-sensitive parts from assemblies in
protective packaging or nonconductive foam.
■
Use transporters and conveyors made of antistatic belts and
roller bushings. Ensure that mechanized equipment used for
moving materials is wired to ground and that proper materials
are selected to avoid static charging. When grounding is not
possible, use an ionizer to dissipate electric charges.
4.6 Workstation Precautions
Use the following grounding precautions at workstations:
■
Cover the workstation with approved static-dissipative
material (refer to Table 4-2).
■
Use a wrist strap connected to a properly grounded work
surface and use properly grounded tools and equipment.
■
Use conductive field service tools, such as cutters,
screwdrivers, and vacuums.
■
When using fixtures that must directly contact dissipative
surfaces, only use fixtures made of static-safe materials.
■
Keep the work area free of nonconductive materials, such as
ordinary plastic assembly aids and Styrofoam.
■
Handle electrostatic-sensitive components, parts, and
assemblies by the case or PCM laminate. Handle these items
only at static-free workstations.
■
Avoid contact with pins, leads, or circuitry.
■
Turn off power and input signals before inserting or removing
connectors or test equipment.
Maintenance and Service Guide
4–5
268135-002.book Page 6 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Preliminaries
4.7 Grounding Equipment and Methods
Grounding equipment must include either a wrist strap or a foot
strap at a grounded workstation.
■
When seated, wear a wrist strap connected to a grounded
system. Wrist straps are flexible straps with a minimum of
one megohm ±10% resistance in the ground cords. To
provide proper ground, wear a strap snugly against the skin
at all times. On grounded mats with banana-plug connectors,
connect a wrist strap with alligator clips.
■
When standing, use foot straps and a grounded floor mat.
Foot straps (heel, toe, or boot straps) can be used at standing
workstations and are compatible with most types of shoes
or boots. On conductive floors or dissipative floor mats, use
foot straps on both feet with a minimum of one-megohm
resistance between the operator and ground. To be effective,
the conductive strips must be worn in contact with the skin.
Other grounding equipment recommended for use in preventing
electrostatic damage includes:
4–6
■
Antistatic tape
■
Antistatic smocks, aprons, and sleeve protectors
■
Conductive bins and other assembly or soldering aids
■
Nonconductive foam
■
Conductive tabletop workstations with ground cords of
one-megohm resistance
■
Static-dissipative tables or floor mats with hard ties to
the ground
■
Field service kits
■
Static awareness labels
■
Material-handling packages
Maintenance and Service Guide
268135-002.book Page 7 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Preliminaries
■
Nonconductive plastic bags, tubes, or boxes
■
Metal tote boxes
■
Electrostatic voltage levels and protective materials
Table 4-1 shows how humidity affects the electrostatic voltage
levels generated by different activities.
Table 4-1
Typical Electrostatic Voltage Levels
Relative Humidity
Event
10%
40%
55%
Walking across carpet
35,000 V
15,000 V
7,500 V
Walking across vinyl floor
12,000 V
5,000 V
3,000 V
Motions of bench worker
6,000 V
800 V
400 V
Removing DIPS from plastic tube
2,000 V
700 V
400 V
Removing DIPS from vinyl tray
11,500 V
4,000 V
2,000 V
Removing DIPS from Styrofoam
14,500 V
5,000 V
3,500 V
Removing bubble pack from PCB
26,500 V
20,000 V
7,000 V
Packing PCBs in foam-lined box
21,000 V
11,000 V
5,000 V
✎ A product can be degraded by as little as 700 volts.
Maintenance and Service Guide
4–7
268135-002.book Page 8 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Preliminaries
Table 4-2 lists the shielding protection provided by antistatic bags
and floor mats.
Table 4-2
Static-Shielding Materials
Material
Use
Voltage Protection Level
Antistatic plastic
Bags
1,500 V
Carbon-loaded plastic
Floor mats
7,500 V
Metallized laminate
Floor mats
5,000 V
4–8
Maintenance and Service Guide
268135-002.book Page 1 Thursday, October 24, 2002 4:10 PM
5
Removal and Replacement
Procedures
This chapter provides removal and replacement procedures.
Phillips P1 screws are removed during disassembly. There are
48 screws, in nine different sizes, that must be removed, replaced,
and loosened when servicing the computer. Make special note of
each screw size and location during removal and replacement.
Refer to Appendix C, “Screw Listing,” for detailed information
on screw sizes, locations, and usage.
Maintenance and Service Guide
5–1
268135-002.book Page 2 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
5.1 Serial Number
Report the computer serial number to Compaq when requesting
information or ordering spare parts. The serial number is located
on the bottom of the computer (Figure 5-1).
Figure 5-1. Serial Number Location
5.2 Disassembly Sequence Chart
Use the chart below to determine the section number to be
referenced when removing computer components.
Table 5-1
Disassembly Sequence Chart
Section
Description
5.3
Preparing the computer for
disassembly
Battery pack
5–2
# of Screws Removed
0
Maintenance and Service Guide
268135-002.book Page 3 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
Table 5-1
Disassembly Sequence Chart (Continued)
Section
5.3
(continued)
Description
# of Screws Removed
MultiBay device
0
Hard drive
1 to remove hard drive
2 to separate hard drive
bezel from hard drive
5.4
Computer feet
0
5.5
Memory expansion board
1 loosened
5.6
Mini PCI communications board
1 loosened
5.7
Connector cover
2
5.8
LED cover
2
5.9
Keyboard
2 to remove keyboard
shield
5.10
Display
4
5.11
Top cover
16
5.12
Speaker assembly
0
5.13
Display release assembly
2
5.14
TouchPad
4
5.15
Fan
4 loosened
5.16
Processor
0
5.17
Disk cell RTC battery
0
5.18
System board
5
5.19
Modem cable
0
Maintenance and Service Guide
5–3
268135-002.book Page 4 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
5.3 Preparing the Computer for
Disassembly
Perform the following steps before disassembling the computer:
1. Turn off the computer.
2. Disconnect the AC adapter and all external devices.
3. Remove the battery pack by following these steps:
a. Turn the computer bottom side up with the left side
facing forward.
b. Slide and hold the battery release latch 1 toward the back
of the computer (Figure 5-2).
c. Use the notch in the battery bay to slide the battery pack
out of the battery bay 2.
d. Remove the battery pack.
Figure 5-2. Removing the Battery Pack
Reverse the above procedures to install the battery pack.
5–4
Maintenance and Service Guide
268135-002.book Page 5 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
4. To remove the battery bezel, slide the bezel straight down
(Figure 5-3).
Figure 5-3. Removing the Battery Bezel
Battery Bezel
Spare Part Number Information
Battery bezel with silver finish for use with
Presario 2800 models
Battery bezel with carbon finish for use with
Evo Notebook N800c, N800v, and N800w models
286876-001
286877-001
Reverse the above procedures to install the battery bezel.
Maintenance and Service Guide
5–5
268135-002.book Page 6 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
5. Remove the MultiBay device by following these steps:
a. Turn the computer bottom side up with the right side
facing forward.
b. Slide and hold the MultiBay release latch toward the
front of the computer 1 (Figure 5-4).
c. Use the notch in the MultiBay device to slide the device
out of the MultiBay 2.
d. Remove the MultiBay device.
Figure 5-4. Removing a MultiBay Device
Reverse the above procedures to install a MultiBay device.
5–6
Maintenance and Service Guide
268135-002.book Page 7 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
6. Remove the hard drive by following these steps:
a. Turn the computer bottom side up with the left side
facing forward.
b. Remove the PM3.0 × 4.0 hard drive retention screw 1
(Figure 5-5).
c. Slide the hard drive forward 2 to unseat the hard drive
connector from the system board.
d. Remove the hard drive.
Figure 5-5. Removing the Hard Drive
Maintenance and Service Guide
5–7
268135-002.book Page 8 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
7. Remove the two PM3.0 × 4.0 screws 1 that secure the hard
drive bezel to the hard drive (Figure 5-6).
8. Slide the hard drive bezel forward to separate it from the hard
drive 2.
Figure 5-6. Removing the Hard Drive Bezel
Hard Drive Bezel
Spare Part Number Information
Hard drive bezel with silver finish for use with
Presario 2800 models
Hard drive bezel with carbon finish for use with
Evo Notebook N800c, N800v, and N800w models
286874-001
286875-001
Reverse the above procedure to install the hard drive and hard
drive bezel.
5–8
Maintenance and Service Guide
268135-002.book Page 9 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
5.4 Computer Feet
The computer feet are adhesive-backed rubber pads. The
computer feet are included in the Miscellaneous
Plastics/Hardware Kit, spare part numbers 285261-001 and
286868-001. The computer feet attach to the base enclosure as
illustrated in Figure 5-7.
Figure 5-7. Replacing the Computer Feet
5.5 Memory Expansion Board
Memory Expansion Boards
Spare Part Number Information
512 MB
256 MB
128 MB
Maintenance and Service Guide
285273-001
285272-001
285271-001
5–9
268135-002.book Page 10 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
1. Prepare the computer for disassembly (Section 5.3).
2. Turn the computer bottom side up with the rear panel facing
forward.
3. Remove the PM2.0 × 5.0 screw 1 that secures the memory
expansion compartment cover to the base enclosure
(Figure 5-8).
4. Lift the front edge of the cover and swing it back 2.
5. Remove the cover 3.
Figure 5-8. Removing the Memory Expansion
Compartment Cover
expansion compartment covers are available with silver
✎ Memory
finish for Presario 2800 models and carbon finish for Evo
Notebook N800c, N800v, and N800w models. These covers are
included in the Miscellaneous Plastics/Hardware Kit, spare part
number 285261-001 for Presario 2800 models, and spare part
number 286868-001 for Evo Notebook N800c, N800v, and
N800w models.
5–10
Maintenance and Service Guide
268135-002.book Page 11 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
6. Spread the memory expansion slot retaining tabs to release
the memory expansion board 1. The board tilts up at a
45-degree angle (Figure 5-9).
7. Remove the board by pulling it away from the connector at a
45-degree angle 2.
Figure 5-9. Removing a Memory Expansion Board
Reverse the above procedure to install a memory
expansion board.
Maintenance and Service Guide
5–11
268135-002.book Page 12 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
5.6 Mini PCI Communications Board
Mini PCI Communication Boards
Spare Part Number Information
U.S. modem
International modem
285286-001
285287-001
1. Prepare the computer for disassembly (Section 5.3).
2. Turn the computer bottom side up with the rear panel facing
forward.
5–12
Maintenance and Service Guide
268135-002.book Page 13 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
3. Remove the PM2.0 × 5.0 screw 1 that secures the mini PCI
compartment cover to the base enclosure (Figure 5-10).
4. Lift the front edge of the cover and swing it back 2.
5. Remove the cover 3.
Figure 5-10. Removing the Mini PCI Communications
Slot Cover
PCI compartment covers are available with silver finish for
✎ Mini
Presario 2800 models and carbon finish for Evo Notebook
N800c, N800v, and N800w models. These covers are included in
the Miscellaneous Plastics/Hardware Kit, spare part number
285261-001 for Presario 2800 models, and spare part number
286868-001 for Evo Notebook N800c, N800v, and N800w
models.
Maintenance and Service Guide
5–13
268135-002.book Page 14 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
6. Disconnect the modem cable from the modem board 1
(Figure 5-11).
✎ The modem cable spare part number is 285268-001.
7. Spread the retaining tabs to release the mini PCI
communications board 2. The board tilts up at a
45-degree angle.
8. Remove the board by pulling it away from the connector
at a 45-degree angle 3.
Figure 5-11. Removing a Mini PCI Communications Board
Reverse the above procedure to install a mini PCI
communications board.
5–14
Maintenance and Service Guide
268135-002.book Page 15 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
5.7 Connector Cover
connector cover is available with silver finish for Presario
✎ The
2800 models and carbon finish for Evo Notebook N800c, N800v,
and N800w models. This cover is included in the Miscellaneous
Plastics/Hardware Kit, spare part number 285261-001 for
Presario 2800 models, and spare part number 286868-001 for Evo
Notebook N800c, N800v, and N800w models.
1. Prepare the computer for disassembly (Section 5.3).
2. Turn the computer bottom side up with the rear panel facing
forward.
3. Remove the two PM2.0 × 5.5 screws 1 that secure the
connector cover to the base enclosure (Figure 5-12).
4. Open the connector cover.
5. Remove the connector cover from the base enclosure 2.
Figure 5-12. Removing the Connector Cover
Reverse the above procedure to install the connector cover.
Maintenance and Service Guide
5–15
268135-002.book Page 16 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
5.8 LED Cover
LED Cover
Spare Part Number Information
LED cover
288503-001
1. Prepare the computer for disassembly (Section 5.3).
2. Turn the computer bottom side up with the rear panel facing
forward.
3. Remove the two black PM2.0 × 10.0 screws that secure the
LED cover to the base enclosure (Figure 5-13).
Figure 5-13. Removing the LED Cover Screws
4. Turn the computer top side up with the front facing forward.
5. Open the computer.
5–16
Maintenance and Service Guide
268135-002.book Page 17 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
6. Use a flat-bladed tool to pry forward on the four clips on the
LED cover 1 (Figure 5-14).
7. Press the esc and F1 keys to reveal the left notch 2 in the LED
cover.
8. Insert a flat-bladed tool into the left notch and lift the left side
of the LED cover 3.
9. Press the Pause and Del keys to reveal the right notch 4 in the
LED cover.
10. Insert a flat-bladed tool into the right notch and lift the right
side of the LED cover 5.
11. Remove the LED cover 6.
Figure 5-14. Removing the LED Cover
Reverse the above procedure to install the LED cover.
Maintenance and Service Guide
5–17
268135-002.book Page 18 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
5.9 Keyboard
Keyboards
Spare Part Number Information
Keyboards (for use with TouchPad models only)
Arabic
Belgian
Brazilian
Chinese
Czech
Danish
French
French Canadian
German
Greek/Polish
Hebrew
Hungarian
International
Italian
285280-171
285280-181
285280-201
285280-AA1
285280-221
285280-081
285280-051
285280-121
285280-041
285280-151
285280-BB1
285280-211
285280-002
285280-061
Korean
Latin American Spanish
Norwegian
Portuguese
Russian
Slovakian
Spanish
Swedish
Swiss
Taiwanese
Thai
Turkish
U.K. English
U.S. English
285280-AD1
285280-161
285280-091
285280-131
285280-251
285280-231
285280-071
285280-101
285280-111
285280-AB1
285280-281
285280-141
285280-031
285280-001
Latin American Spanish
Norwegian
Portuguese
Russian
Slovakian
Spanish
Swedish
Swiss
Taiwanese
Thai
Turkish
U.K. English
U.S. English
285281-161
285281-091
285281-131
285281-251
285281-231
285281-071
285281-101
285281-111
285281-AB1
285281-281
285281-141
285281-031
285281-001
Keyboards with pointing stick
Arabic
Belgian
Brazilian
Czech
Danish
French
French Canadian
German
Greek/Polish
Hebrew
Hungarian
International
Italian
Korean
5–18
285281-171
285281-181
285281-201
285281-221
285281-081
285281-051
285281-121
285281-041
285281-151
285281-BB1
285281-211
285281-002
285281-061
285281-AD1
Maintenance and Service Guide
268135-002.book Page 19 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
1. Prepare the computer for disassembly (Section 5.3).
2. Remove the LED cover (Section 5.8).
3. Lift the back edge of the keyboard 1 (Figure 5-15).
4. Slide the keyboard toward the back of the computer 2.
5. Lift the back edge of the keyboard and swing it forward 3
until it rests on the palm rest.
Figure 5-15. Releasing the Keyboard
Maintenance and Service Guide
5–19
268135-002.book Page 20 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
6. Remove the two PM2.0 × 4.0 screws 1 that secure the
keyboard shield to the base enclosure (Figure 5-16).
7. Remove the keyboard shield 2.
Figure 5-16. Removing the Keyboard Shield
keyboard shield is included in the Miscellaneous
✎ The
Plastics/Hardware Kit, spare part numbers 285261-001 and
286868-001.
5–20
Maintenance and Service Guide
268135-002.book Page 21 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
8. Release the ZIF connector 1 to which the keyboard cable is
connected and disconnect the keyboard cable 2 from the
system board (Figure 5-17).
9. Remove the keyboard.
Figure 5-17. Removing the Keyboard
Reverse the above procedure to install the keyboard.
Maintenance and Service Guide
5–21
268135-002.book Page 22 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
5.10 Display
Displays
Spare Part Number Information
Displays
Contain parts with carbon finish for use with
Evo Notebook N800c, N800v, and N800w models
15-inch, UXGA
15-inch, SXGA+
15-inch, XGA
14-inch, XGA
Contain parts with silver finish for use with
Presario 2800 models
15-inch, UXGA
15-inch, SXGA+
15-inch, XGA
14-inch, XGA
MultiPort cover
286872-001
286871-001
286870-001
286869-001
285265-001
285264-001
285263-001
285262-001
289037-001
1. Prepare the computer for disassembly (Section 5.3).
2. Remove the LED cover (Section 5.8).
3. Close the computer and position the computer so the rear
panel faces forward.
5–22
Maintenance and Service Guide
268135-002.book Page 23 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
4. Remove the two PM2.5 × 9.0 screws that secure the display
hinges to the base enclosure (Figure 5-18).
Figure 5-18. Removing the Display Screws
Maintenance and Service Guide
5–23
268135-002.book Page 24 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
5. Position the computer so the front faces forward and open the
computer.
6. Disconnect the display video 1 and display inverter 2 cables
from the system board (Figure 5-19).
7. Remove the two PM2.0 × 10.0 screws 3 that secure the
display hinges to the base enclosure.
8. Lift the display straight up 4 and remove it from the base
enclosure.
Figure 5-19. Removing the Display
5–24
Maintenance and Service Guide
268135-002.book Page 25 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
9. Remove the hinge covers from the display (Figure 5-20).
Figure 5-20. Removing the Hinge Covers
display hinge covers are included in the Miscellaneous
✎ The
Plastics/Hardware Kit, spare part numbers 285261-001 and
286868-001.
the hinge covers on the display before installing the
✎ Install
display on the base enclosure.
Reverse the above procedure to install the display.
Maintenance and Service Guide
5–25
268135-002.book Page 26 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
5.11 Top Cover
Top Cover
Spare Part Number Information
For Dual Point (TouchPad and Point Stick)
For TouchPad only (silver finish for use with
Presario 2800 models)
For TouchPad only (carbon finish for use with
Evo Notebook N800c, N800v, and N800w models)
285256-001
285257-001
295699-001
1. Prepare the computer for disassembly (Section 5.3) and
remove the following components:
a. LED cover (Section 5.8)
b. Keyboard and shield (Section 5.9)
c. Display (Section 5.10)
2. Turn the computer bottom side up with the front facing
forward.
5–26
Maintenance and Service Guide
268135-002.book Page 27 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
3. Remove the nine PM2.0 × 8.0 screws 1 securing the top
cover to the base enclosure (Figure 5-21).
4. Remove the PM2.0 × 4.0 screw 2 securing the top cover to
the base enclosure in the hard drive bay.
✎ Do not remove the screw in the middle of the hard drive bay 3.
Figure 5-21. Removing the Top Cover Screws
5. Turn the computer top side up with the rear panel facing
forward.
Maintenance and Service Guide
5–27
268135-002.book Page 28 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
6. Disconnect the drive activity light and battery power light
cable from the system board 1 (Figure 5-22).
7. Release the ZIF connector 2 to which the TouchPad cable is
connected and disconnect the TouchPad cable 3 from the
system board.
8. Disconnect the speaker cable 4 from the system board.
Figure 5-22. Disconnecting the Drive Activity Light/Battery
Power Light, TouchPad, and Speaker Cables
5–28
Maintenance and Service Guide
268135-002.book Page 29 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
9. Remove the following screws:
a. Two PM2.0 × 5.5 screws 1 that secure the top cover to
the base enclosure on the computer rear panel
(Figure 5-23)
b. Two PM2.0 × 4.0 screws 2 that secure the top cover to
the base enclosure through the metal tabs on the top
cover shield
c. Two PM2.0 × 8.0 screws 3 that secure the top cover to
the base enclosure through the plastic tabs on the top
cover
Figure 5-23. Removing the Top Cover Screws
Maintenance and Service Guide
5–29
268135-002.book Page 30 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
10. Remove the top cover (Figure 5-24).
Figure 5-24. Removing the Top Cover
Reverse the above procedure to install the top cover.
5–30
Maintenance and Service Guide
268135-002.book Page 31 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
5.12 Speaker Assembly
Speaker Assembly
Spare Part Number Information
Speaker assembly
285266-001
1. Prepare the computer for disassembly (Section 5.3) and
remove the following components:
a. LED cover (Section 5.8)
b. Keyboard and shield (Section 5.9)
c. Display (Section 5.10)
d. Top cover (Section 5.11)
2. Position the top cover bottom side up with the front facing
forward.
Maintenance and Service Guide
5–31
268135-002.book Page 32 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
3. Route the drive activity light/battery power light cable and
speaker cable out of the retaining clips in the top cover 1
and 2 (Figure 5-25).
4. Remove the strip of tape 3 that secures the speaker assembly
and TouchPad cables to the top cover and TouchPad
assembly.
5. Remove the PM2.0 × 4.0 screw 4 that secures the speaker
assembly to the top cover.
6. Lift the speaker assembly straight up 5 and remove it from
the top cover.
Figure 5-25. Removing the Speaker Assembly
Reverse the above procedure to install the speaker assembly.
5–32
Maintenance and Service Guide
268135-002.book Page 33 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
5.13 Display Release Assembly
display release assembly is available with silver finish for
✎ The
Presario 2800 models and carbon finish for Evo Notebook
N800c, N800v, and N800w models. This assembly is included in
the Miscellaneous Plastics/Hardware Kit, spare part number
285261-001 for Presario 2800 models, and spare part number
286868-001 for Evo Notebook N800c, N800v, and N800w
models.
1. Prepare the computer for disassembly (Section 5.3) and
remove the following components:
a. LED cover (Section 5.8)
b. Keyboard and shield (Section 5.9)
c. Display (Section 5.10)
d. Top cover (Section 5.11)
2. Position the top cover bottom side up with the front facing
forward.
Maintenance and Service Guide
5–33
268135-002.book Page 34 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
3. Remove the two PM2.0 × 4.0 screws 1 that secure the
display release assembly to the top cover (Figure 5-26).
4. Lift the display release assembly straight up 2 and remove it
from the top cover.
Figure 5-26. Removing the Display Release Assembly
Reverse the above procedure to install the display release
assembly.
5–34
Maintenance and Service Guide
268135-002.book Page 35 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
5.14 TouchPad
TouchPad and TouchButton Board
Spare Part Number Information
TouchPad
TouchButton board for Dual Point
TouchButton board for TouchPad
285258-001
285259-001
285260-001
1. Prepare the computer for disassembly (Section 5.3) and
remove the following components:
a. LED cover (Section 5.8)
b. Keyboard and shield (Section 5.9)
c. Display (Section 5.10)
d. Top cover (Section 5.11)
e. Speaker assembly (Section 5.12)
Maintenance and Service Guide
5–35
268135-002.book Page 36 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
2. Remove the four PM2.0 × 4.0 screws 1 that secure the
TouchPad bracket to the top cover (Figure 5-27).
3. Disconnect the TouchPad cable 2 from the low insertion
force (LIF) connector on the TouchPad.
4. Slide the TouchPad bracket toward the back of the top
cover 3.
5. Lift the TouchPad bracket straight up 4 and remove it.
Figure 5-27. Removing the TouchPad
5–36
Maintenance and Service Guide
268135-002.book Page 37 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
6. Remove the TouchPad 1 and the TouchButton board 2 from
the top cover (Figure 5-28).
✎ The TouchPad cables are part of the TouchButton board.
Figure 5-28. Removing the TouchPad and the TouchButton
Board
Reverse the above procedure to install the TouchPad and the
TouchButton board.
Maintenance and Service Guide
5–37
268135-002.book Page 38 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
5.15 Fan
Fan
Spare Part Number Information
Fan
285267-001
1. Prepare the computer for disassembly (Section 5.3) and
remove the following components:
a. LED cover (Section 5.8)
b. Keyboard and shield (Section 5.9)
c. Display (Section 5.10)
d. Top cover (Section 5.11)
5–38
Maintenance and Service Guide
268135-002.book Page 39 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
2. Disconnect the fan cable from the system board 1
(Figure 5-29).
3. Loosen the four PM2.0 × 9.0 shoulder screws 2 that secure
the fan to the processor mounting bracket.
✎ These screws are secured to the fan and should not be removed.
4. Lift the fan straight up to remove it from the
base enclosure 3.
Figure 5-29. Removing the Fan
Reverse the above procedure to install the fan.
Maintenance and Service Guide
5–39
268135-002.book Page 40 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
5.16 Processor
Processors
Spare Part Number Information
Intel Mobile Pentium 4 with SpeedStep technology
2.2-GHz processor
2.0-GHz processor
1.9-GHz processor
1.8-GHz processor
1.7-GHz processor
1.6-GHz processor
1.5-GHz processor
1.4-GHz processor
308420-001
305075-001
305074-001
285295-001
285294-001
285293-001
285292-001
285291-001
Intel Mobile Pentium 4 (non-SpeedStep technology)
1.6-GHz processor
1.5-GHz processor
306704-001
306703-001
Ä
CAUTION: Before removing the processor, make special note of
the orientation of the printing on the processor. The gold triangle
should be in the lower right corner when installing the processor.
The processor must be installed in the same orientation in which it
was removed.
1. Prepare the computer for disassembly (Section 5.3) and
remove the following components:
a. LED cover (Section 5.8)
b. Keyboard and shield (Section 5.9)
c. Display (Section 5.10)
d. Top cover (Section 5.11)
e. Fan (Section 5.15)
5–40
Maintenance and Service Guide
268135-002.book Page 41 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
2. Use a flat-bladed tool to turn the processor locking screw 1
one-half turn counterclockwise (Figure 5-30).
3. Lift the processor straight up and remove it 2.
sure the gold triangle 3 is in the lower right corner when
✎ Make
installing the processor.
Figure 5-30. Removing the Processor
Reverse the above procedure to install the processor.
Maintenance and Service Guide
5–41
268135-002.book Page 42 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
5.17 Disk Cell RTC Battery
Disk Cell RTC Battery
Spare Part Number Information
Disk cell RTC battery
198718-001
1. Prepare the computer for disassembly (Section 5.3) and
remove the following components:
a. LED cover (Section 5.8)
b. Keyboard and shield (Section 5.9)
c. Display (Section 5.10)
d. Top cover (Section 5.11)
5–42
Maintenance and Service Guide
268135-002.book Page 43 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
2. Use a flat-bladed tool to release the RTC battery from its
socket 1 (Figure 5-31).
3. Remove the RTC battery 2.
Figure 5-31. Removing the Disk Cell RTC Battery
replacing an RTC battery, insert the battery with the “+”
✎ When
sign facing up.
Maintenance and Service Guide
5–43
268135-002.book Page 44 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
5.18 System Board
System Boards
Spare Part Number Information
System boards (do not contain memory)
with the ATI Mobile Radeon 9000 graphics controller
64-MB of video memory
32-MB of video memory
310784-001
310783-001
with the ATI P7 graphics controller
64-MB of video memory
32-MB of video memory
285254-001
285253-001
replacing the system board, ensure that the following
✎ When
components are removed from the old system board and installed
on the new system board:
■ Memory expansion boards (Section 5.5)
■ Mini PCI communications board (Section 5.6)
■ Processor (Section 5.16)
■ Disk cell RTC battery (Section 5.17)
■ Modem cable (Section 5.19)
1. Prepare the computer for disassembly (Section 5.3) and
remove the following components:
a. LED cover (Section 5.8)
b. Keyboard and shield (Section 5.9)
c. Display (Section 5.10)
d. Top cover (Section 5.11)
e. Fan (Section 5.15)
2. Position the computer so the front faces forward.
5–44
Maintenance and Service Guide
268135-002.book Page 45 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
3. Remove the two PM2.0 × 8.0 screws 1 that secure the left 2
and right 3 display supports to the base enclosure
(Figure 5-32).
4. Remove the left and right display supports from the base
enclosure.
Figure 5-32. Removing the Display Supports
Maintenance and Service Guide
5–45
268135-002.book Page 46 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
plastic fan channel 1 attaches to the right display support. The
✎ Achannel
has two slots 2 on either end that fit around two tabs 3
on the display support. The fan channel is included in the
Miscellaneous Plastics/Hardware Kit, spare part numbers
285261-001 and 286868-001 (Figure 5-33).
Figure 5-33. Replacing the Fan Channel on the Right
Display Support
5–46
Maintenance and Service Guide
268135-002.book Page 47 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
5. Remove the two PM2.0 × 5.5 screws 1 that secure the system
board to the base enclosure on either side of the MultiBay
connector (Figure 5-34).
6. Remove the two PM2.0 × 8.0 screws 2 that secure the system
board to the base enclosure through the processor support
bracket.
Figure 5-34. Removing the System Board Screws
Maintenance and Service Guide
5–47
268135-002.book Page 48 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
7. Use the MultiBay connector 1 to lift 2 the front of the
system board until the board rests at an angle (Figure 5-35).
8. Slide the system board forward at an angle 3 and remove it
from the base enclosure.
9. Remove the PC Card bezel 4 from the system board.
Figure 5-35. Removing the System Board
Reverse the above procedure to install the system board.
5–48
Maintenance and Service Guide
268135-002.book Page 49 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
5.19 Modem Cable
modem cable is included in the Miscellaneous Cable Kit,
✎ The
spare part number 285268-001.
1. Prepare the computer for disassembly (Section 5.3) and
remove the following components:
a. LED cover (Section 5.8)
b. Keyboard and shield (Section 5.9)
c. Display (Section 5.10)
d. Top cover (Section 5.11)
e. Fan (Section 5.15)
f.
System board (Section 5.18)
2. Turn the system board bottom side up with the rear panel
facing forward.
Maintenance and Service Guide
5–49
268135-002.book Page 50 Thursday, October 24, 2002 4:10 PM
Removal and Replacement Procedures
3. If the modem is installed on the system board, disconnect the
modem cable from the modem 1 (Figure 5-36).
4. Disconnect the modem cable from the system board 2.
5. Remove the modem cable.
Figure 5-36. Removing the Modem Cable
When installing the modem cable, route the cable as shown in
Figure 5-36.
5–50
Maintenance and Service Guide
268135-002.book Page 1 Thursday, October 24, 2002 4:10 PM
6
Specifications
This chapter provides physical and performance specifications.
Table 6-1
Computer
Dimensions
Height
Width
Depth
1.30 in
12.48 in
10.10 in
3.3 cm
31.7 cm
25.0 cm
Weight (varies by configuration)
15.0-inch display,
MultiBay device,
1 memory expansion
board
14.1-inch display,
MultiBay weight
saver, 1 memory
expansion board
6.40 lb
2.92 kg
5.45 lb
2.47 kg
Stand-alone power requirements
Nominal operating
voltage
Average operating
power
Peak operating power
Power in Suspend
mode
Power in Hibernation
mode
14.8 VDC
15.8 W
38 W
< 800 mW
< 100 mW
Maintenance and Service Guide
6–1
268135-002.book Page 2 Thursday, October 24, 2002 4:10 PM
Specifications
Table 6-1
Computer (Continued)
Temperature
Operating
Nonoperating
50° to 95° F
14° to 140° F
10° to 35° C
-10° to 60° C
Relative humidity (noncondensing)
Operating
Nonoperating
10% to 90%
5% to 95%, 101.6° F (38.7° C) maximum wet bulb
temperature
Altitude (unpressurized)
Operating
Nonoperating
0 to 10,000 ft
0 to 30,000 ft
0 to 3,048 m
0 to 9,144 m
Shock
Operating
Nonoperating
10 G, 11 ms, half-sine
60 G, 11 ms, half-sine
Vibration
Operating
Nonoperating
0.5 G zero-to-peak, 10 to 500 Hz, 0.25 oct/min
sweep rate
1.0 G zero-to-peak, 10 to 500 Hz, 0.5 oct/min
sweep rate
product safety standards specify thermal limits for
✎ Applicable
plastic surfaces. The computer operates well within this range of
temperatures.
6–2
Maintenance and Service Guide
268135-002.book Page 3 Thursday, October 24, 2002 4:10 PM
Specifications
Table 6-2
15.0-inch UXGA, TFT Display
Dimensions
Height
Width
Diagonal
9.00 in
11.94 in
15.0 in
Number of colors
up to 16.8 million
Contrast ratio
150:1
Brightness
120+ nit typical
22.86 cm
30.33 cm
38.10 cm
Pixel resolution
Pitch
Format
Configuration
0.264 × 0.264 mm
1600 × 1200
RGB vertical stripe
Backlight
Edge lit
Character display
80 × 25
Total power
consumption
4.20 W
Maintenance and Service Guide
6–3
268135-002.book Page 4 Thursday, October 24, 2002 4:10 PM
Specifications
Table 6-3
15.0-inch SXGA+, TFT Display
Dimensions
Height
Width
Diagonal
9.00 in
11.94 in
15.0 in
Number of colors
up to 16.8 million
Contrast ratio
150:1
Brightness
120+ nit typical
22.86 cm
30.33 cm
38.10 cm
Pixel resolution
Pitch
Format
Configuration
0.264 × 0.264 mm
1280 × 1024
RGB vertical stripe
Backlight
Edge lit
Character display
80 × 25
Total power
consumption
4.20 W
6–4
Maintenance and Service Guide
268135-002.book Page 5 Thursday, October 24, 2002 4:10 PM
Specifications
Table 6-4
15.0-inch XGA, TFT Display
Dimensions
Height
Width
Diagonal
9.00 in
11.94 in
15.0 in
Number of colors
up to 16.8 million
Contrast ratio
150:1
Brightness
120+ nit typical
22.86 cm
30.33 cm
38.10 cm
Pixel resolution
Pitch
Format
Configuration
0.264 × 0.264 mm
1024 × 768
RGB vertical stripe
Backlight
Edge lit
Character display
80 × 25
Total power
consumption
4.20 W
Maintenance and Service Guide
6–5
268135-002.book Page 6 Thursday, October 24, 2002 4:10 PM
Specifications
Table 6-5
14.1-inch XGA, TFT Display
Dimensions
Height
Width
Diagonal
11.22 in
8.46 in
14.1 in
Number of colors
up to 16.8 million
Contrast ratio
150:1
Brightness
120+ nits typical
20.50 mm
21.49 mm
35.81 mm
Pixel resolution
Pitch
Format
Configuration
0.264 × 0.264 mm
1024 × 768
RGB stripe
Backlight
Edge lit
Character display
80 × 25
Total power
consumption
4.2 W
6–6
Maintenance and Service Guide
268135-002.book Page 7 Thursday, October 24, 2002 4:10 PM
Specifications
Table 6-6
Hard Drives
60 GB
40 GB
30 GB
20 GB
User capacity
per drive1
60.0 GB
40.0 GB
30.0 GB
20.0 GB
Drive height
9.5 mm
9.5 mm
9.5 mm
9.5 mm
Drive width
70 mm
70 mm
70 mm
70 mm
Interface type
ATA-5
ATA-5
ATA-5
ATA-5
Seek times (typical read, including setting)
Single track
Average
Full stroke
Logical blocks3
3 ms
13 ms
24 ms
3 ms
13 ms
24 ms
3 ms
13 ms
24 ms
3 ms
13 ms
24 ms
117,210,240
78,140,160
58,605,120
39,070,080
16,383
16
63
16,383
16
63
16,383
16
63
Logical configuration
Cylinders
Heads
Sectors per
track
16,383
16
63
11
GB = 1,073,741,824 bytes.
capability may differ.
3Actual drive specifications may differ slightly.
Certain restrictions and exclusions apply. Consult the Compaq Customer
Support Center for details.
2System
Maintenance and Service Guide
6–7
268135-002.book Page 8 Thursday, October 24, 2002 4:10 PM
Specifications
Table 6-6
Hard Drives (Continued)
60 GB
40 GB
30 GB
20 GB
22,784
6
293 to 560
22,784
4
293 to 560
25,800
2
398 to 731
22,784
4
293 to 560
512
512
512
512
2 MB
2 MB
512 KB
512 KB
4200 rpm
4200 rpm
4200 rpm
4200 rpm
66.6
66.6
100
66.6
109 to 203
109 to 203
155 to 256
109 to 203
Physical configuration
Cylinders3
Heads
Sectors per
track3
Bytes per sector
Buffer
size3
Disk rotational
speed
Transfer rate
Interface max
(MB/s)2
Media (MB/s)3
11
GB = 1,073,741,824 bytes.
capability may differ.
3Actual drive specifications may differ slightly.
Certain restrictions and exclusions apply. Consult the Compaq Customer
Support Center for details.
2System
6–8
Maintenance and Service Guide
268135-002.book Page 9 Thursday, October 24, 2002 4:10 PM
Specifications
Table 6-7
Diskette Drive
Diskette size
3.5 in
Light
On system
Height
0.5 in (12.7 mm)
Bytes per sector
512
Sectors per track
High density
Low density
18 (1.44 MB)
9
Tracks per side
High density
Low density
80
80
Read/write heads
2
Average seek times
Track-to-track (high/low)
Average (high/low)
Settling time
Latency average
Maintenance and Service Guide
3 to 6 ms
95 to 174 ms
15 ms
100 ms
6–9
268135-002.book Page 10 Thursday, October 24, 2002 4:10 PM
Specifications
Table 6-8
CD-ROM Drive
Applicable disk
CD-ROM (Mode 1, 2, and 3)
CD-XA ready (Mode 2, Form 1 and 2)
CD-I ready (Mode 2, Form 1 and 2)
CD-R (read only)
CD Plus
Photo CD (single/multisession)
CD-Extra
Video CD
CD-WO (fixed packets only)
CD-Bridge
Center hole diameter
0.59 in
1.5 cm
Disk diameter
12 cm, 8 cm
Disk thickness
0.047 in
Track pitch
1.6 µm
1.2 mm
Access time
Random
Full stroke
Cache buffer
< 150 ms
< 300 ms
128 KB
Data transfer rate
Sustained, 16X
Variable
Normal PIO Mode 4 (single burst)
150 KB/s at 1X
1500 to 3600 KB/s (10X to 24X)
16.66 KB/s
Startup time
< 8 seconds
Stop time
< 4 seconds
6–10
Maintenance and Service Guide
268135-002.book Page 11 Thursday, October 24, 2002 4:10 PM
Specifications
Table 6-9
DVD-ROM Drive
Applicable disk
DVD-5, DVD-9, DVD-10
CD-ROM (Mode 1 and 2)
CD Digital Audio
CD-XA ready (Mode 2, Form 1 and 2)
CD-I ready (Mode 2, Form 1 and 2)
CD-R (read only)
CD Plus
Photo CD (single/multisession)
CD-Bridge
Center hole diameter
0.59 in
Disk diameter
1.5 cm
12 cm, 8 cm
Disk thickness
0.047 in
Track pitch
0.74 µm
1.2 mm
Access time
Random
Full stroke
< 150 ms
< 225 ms
Audio output level
Line-out, 0.7 Vrms
Cache buffer
512 KB
Data transfer rate
Max 24X CD
Max 8X DVD
Normal IO Mode 4 (single burst)
3600 KB/s (150 KB/s at 1X CD rate)
10,800 KB/s (1352 KB/s at 1X
DVD rate)
16.6 MB/s
Startup time
< 12 seconds
Stop time
< 3 seconds
Maintenance and Service Guide
6–11
268135-002.book Page 12 Thursday, October 24, 2002 4:10 PM
Specifications
Table 6-10
CD-RW Drive
Center hole diameter
0.59 in
0.39 cm
Disk diameter
12 cm, 8 cm
Disk thickness
0.47 in
1.19 cm
Track pitch
0.74 µm
Access time
Random
Full stroke
< 150 ms
< 225 ms
Audio output level
Line-out, 0.7 Vrms
Cache buffer
128 KB
Data transfer rate
Sustained, 16X
Sustained, 4X CD-RW
Normal PIO Mode 4 (single burst)
150 KB/s
5,520 KB/s
16.6 MB/s
Startup time
< 15 seconds
Stop time
< 6 seconds
6–12
Maintenance and Service Guide
268135-002.book Page 13 Thursday, October 24, 2002 4:10 PM
Specifications
Table 6-11
External AC Adapter
Weight
0.45 lb
0.21 kg
Power supply
90 to 264 VAC (auto-switching)
< 60 W
50 to 60 Hz
Rated input voltage
Rated input current
Rated frequency
Table 6-12
8-cell, Li ion Battery Pack
Dimensions
Height
Width
Depth
Weight
0.82 in
5.67 in
3.03 in
0.94 lb
21 mm
144 mm
77 mm
0.43 kg
Energy
4.0 Amp hour
Voltage
Amp-hour capacity
Watt-hour capacity
3.6 Amp hour
Voltage
Amp-hour capacity
Watt-hour capacity
14.4 V
4.0 Ah
57.6 Wh
14.4 V
3.6 Ah
51.8 Wh
Temperature
Operating
Nonoperating
Maintenance and Service Guide
50 to 104° F
-4 to 104° F
10 to 40° C
-20 to 60° C
6–13
268135-002.book Page 14 Thursday, October 24, 2002 4:10 PM
Specifications
Table 6-13
System DMA
Hardware DMA
System Function
DMA0
Available for audio
DMA1
Entertainment audio
(default; alternate = DMA0, DMA3, none)
DMA2
Diskette drive
DMA3
ECP parallel port LPT1
(default; alternate = DMA0, none)
DMA4
DMA controller cascading (not available)
DMA5
Available for PC Card
DMA6
Not assigned
DMA7
Not assigned
✎ PC Card controller can use DMA 1, 2, or 5.
6–14
Maintenance and Service Guide
268135-002.book Page 15 Thursday, October 24, 2002 4:10 PM
Specifications
Table 6-14
System Interrupts
Hardware IRQ
System Function
IRQ0
System timer
IRQ1
Keyboard controller
IRQ2
Cascaded
IRQ3
COM2
IRQ4
COM1
IRQ5
Audio (default)*
IRQ6
Diskette drive
IRQ7
Parallel port
IRQ8
Real time clock (RTC)
IRQ9
Infrared
IRQ10
System use
IRQ11
System use
IRQ12
Internal point stick or external mouse
IRQ13
Coprocessor (not available to any peripheral)
IRQ14
IDE interface (hard drive and optical drive)
IRQ15
System use
Cards may assert IRQ3, IRQ4, IRQ5, IRQ7, IRQ9, IRQ10, IRQ11,
✎ PC
or IRQ15. Either the infrared or the serial port may assert IRQ3 or
IRQ4.
*Default configuration; audio possible configurations are IRQ5, IRQ7, IRQ9,
IRQ10, or none.
Maintenance and Service Guide
6–15
268135-002.book Page 16 Thursday, October 24, 2002 4:10 PM
Specifications
Table 6-15
System I/O Addresses
I/O Address (hex)
System Function (shipping configuration)
000 - 00F
DMA controller no. 1
010 - 01F
Unused
020 - 021
Interrupt controller no. 1
022 - 024
Opti chipset configuration registers
025 - 03F
Unused
02E - 02F
87334 “Super I/O” configuration for CPU
040 - 05F
Counter/timer registers
044 - 05F
Unused
060
Keyboard controller
061
Port B
062 - 063
Unused
064
Keyboard controller
065 - 06F
Unused
070 - 071
NMI enable/real time clock
072 - 07F
Unused
080 - 08F
DMA page registers
090 - 091
Unused
092
Port A
093 - 09F
Unused
0A0 - 0A1
Interrupt controller no. 2
6–16
Maintenance and Service Guide
268135-002.book Page 17 Thursday, October 24, 2002 4:10 PM
Specifications
Table 6-15
System I/O Addresses (Continued)
I/O Address (hex)
System Function (shipping configuration)
0A2 - 0BF
Unused
0C0 - 0DF
DMA controller no. 2
0E0 - 0EF
Unused
0F0 - 0F1
Coprocessor busy clear/reset
0F2 - 0FF
Unused
100 - 16F
Unused
170 - 177
Secondary fixed disk controller
178 - 1EF
Unused
1F0 - 1F7
Primary fixed disk controller
1F8 - 200
Unused
201
Joystick (decoded in ESS1688)
202 - 21F
Unused
220 - 22F
Entertainment audio
230 - 26D
Unused
26E - 26
Unused
278 - 27F
Unused
280 - 2AB
Unused
2A0 - 2A7
Unused
2A8 - 2E7
Unused
2E8 - 2EF
Reserved serial port
Maintenance and Service Guide
6–17
268135-002.book Page 18 Thursday, October 24, 2002 4:10 PM
Specifications
Table 6-15
System I/O Addresses (Continued)
I/O Address (hex)
System Function (shipping configuration)
2F0 - 2F7
Unused
2F8 - 2FF
Infrared port
300 - 31F
Unused
320 - 36F
Unused
370 - 377
Secondary diskette drive controller
378 - 37F
Parallel port (LPT1/default)
380 - 387
Unused
388 - 38B
FM synthesizer—OPL3
38C - 3AF
Unused
3B0 - 3BB
VGA
3BC - 3BF
Reserved (parallel port/no EPP support)
3C0 - 3DF
VGA
3E0 - 3E1
PC Card controller in CPU
3E2 - 3E3
Unused
3E8 - 3EF
Internal modem
3F0 - 3F7
“A” diskette controller
3F8 - 3FF
Serial port (COM1/default)
CF8 - CFB
PCI configuration index register (PCIDIVO-1)
CFC - CFF
PCI configuration data register (PCIDIVO-1)
6–18
Maintenance and Service Guide
268135-002.book Page 19 Thursday, October 24, 2002 4:10 PM
Specifications
Table 6-16
System Memory Map
Size
Memory Address
System Function
640 KB
00000000-0009FFFF
Base memory
128 KB
000A0000-000BFFFF
Video memory
48 KB
000C0000-000CBFFF
Video BIOS
160 KB
000C8000-000E7FFF
Unused
64 KB
000E8000-000FFFFF
System BIOS
15 MB
00100000-00FFFFFF
Extended memory
58 MB
01000000-047FFFFF
Super extended memory
58 MB
04800000-07FFFFFF
Unused
2 MB
08000000-080FFFFF
Video memory (direct access)
4 GB
08200000-FFFEFFFF
Unused
64 KB
FFFF0000-FFFFFFFF
System BIOS
Maintenance and Service Guide
6–19
268135-002.book Page 1 Thursday, October 24, 2002 4:10 PM
A
Connector Pin Assignments
Table A-1
RJ-45 Network Interface
Pin
Signal
Pin
Signal
1
Transmit +
5
Unused
2
Transmit -
6
Receive -
3
Receive +
7
Unused
4
Unused
8
Unused
Maintenance and Service Guide
A–1
268135-002.book Page 2 Thursday, October 24, 2002 4:10 PM
Connector Pin Assignments
Table A-2
RJ-11 Modem
Pin
Signal
Pin
Signal
1
Unused
4
Unused
2
Tip
5
Unused
3
Ring
6
Unused
Table A-3
Universal Serial Bus
Pin
Signal
Pin
Signal
1
+5 VDC
3
Data +
2
Data -
4
Ground
A–2
Maintenance and Service Guide
268135-002.book Page 3 Thursday, October 24, 2002 4:10 PM
Connector Pin Assignments
Table A-4
S-Video
Pin
Signal
Pin
Signal
1
Ground (Y)
3
Y-Luminance (Intensity)
2
Ground (C)
4
C-Chrominance (Color)
Maintenance and Service Guide
A–3
268135-002.book Page 4 Thursday, October 24, 2002 4:10 PM
Connector Pin Assignments
Table A-5
Parallel
Pin
Signal
Pin
Signal
1
Strobe*
10
Acknowledge*
2
Data bit 0
11
Busy
3
Data bit 1
12
Paper out
4
Data bit 2
13
Select
5
Data bit 3
14
Auto line feed*
6
Data bit 4
15
Error*
7
Data bit 5
16
Initialize printer*
8
Data bit 6
17
Select in*
9
Data bit 7
18-25
Signal ground
*Signal is active low.
A–4
Maintenance and Service Guide
268135-002.book Page 5 Thursday, October 24, 2002 4:10 PM
Connector Pin Assignments
Table A-6
External Monitor
Pin
Signal
Pin
Signal
1
Red analog
9
+5 VDC
2
Green analog
10
Ground
3
Blue analog
11
Monitor detect
4
Not connected
12
DDC 2B data
5
Ground
13
Horizontal sync
6
Ground analog
14
Vertical sync
7
Ground analog
15
DDC 2B clock
8
Ground analog
Maintenance and Service Guide
A–5
268135-002.book Page 6 Thursday, October 24, 2002 4:10 PM
Connector Pin Assignments
Table A-7
Stereo Speaker/Headphone
Pin
Signal
Pin
Signal
1
Audio out
2
Ground
Table A-8
Microphone
Pin
Signal
Pin
Signal
1
Audio in
2
Ground
A–6
Maintenance and Service Guide
268135-002.book Page 1 Thursday, October 24, 2002 4:10 PM
B
Power Cord Set Requirements
3-Conductor Power Cord Set
The computer’s wide range input feature permits it to operate
from any line voltage from 100 to 120 or 220 to 240 volts AC.
The power cord set received with the computer meets the
requirements for use in the country where the equipment is
purchased.
Power cord sets for use in other countries must meet the
requirements of the country where the computer is used. For more
information on power cord set requirements, contact a Compaq
authorized reseller or service provider.
General Requirements
The requirements listed below are applicable to all countries:
■
The length of the power cord set must be at least 5.00 feet
(1.5 m) and a maximum of 6.50 feet (2.0 m).
■
All power cord sets must be approved by an acceptable
accredited agency responsible for evaluation in the country
where the power cord set will be used.
■
The power cord set must have a minimum current capacity of
10 amps and a nominal voltage rating of 125 or 250 volts AC,
as required by each country’s power system.
■
The appliance coupler must meet the mechanical
configuration of an EN 60 320/IEC 320 Standard Sheet C13
connector, for mating with the appliance inlet on the back of
the computer.
Maintenance and Service Guide
B–1
268135-002.book Page 2 Thursday, October 24, 2002 4:10 PM
Power Cord Set Requirements
Country-Specific Requirements
3-Conductor Power Cord Set Requirements
Country
Accredited Agency
Applicable Note Number
Australia
EANSW
1
Austria
OVE
1
Belgium
CEBC
1
Canada
CSA
2
Denmark
DEMKO
1
Finland
FIMKO
1
France
UTE
1
Germany
VDE
1
Italy
IMQ
1
Japan
METI
3
The Netherlands
KEMA
1
Norway
NEMKO
1
Sweden
SEMKO
1
Switzerland
SEV
1
United Kingdom
BSI
1
United States
UL
2
B–2
Maintenance and Service Guide
268135-002.book Page 3 Thursday, October 24, 2002 4:10 PM
Power Cord Set Requirements
Notes
1. The flexible cord must be <HAR> Type HO5VV-F,
3-conductor, 1.0 mm2 conductor size. Power cord set fittings
(appliance coupler and wall plug) must bear the certification
mark of the agency responsible for evaluation in the country
where it will be used.
2. The flexible cord must be Type SPT-3 or equivalent, No. 18
AWG, 3-conductor. The wall plug must be a two-pole
grounding type with a NEMA 5-15P (15 A, 125 V) or NEMA
6-15P (15 A, 250 V) configuration.
3. The appliance coupler, flexible cord, and wall plug must bear
a “T” mark and registration number in accordance with the
Japanese Dentori Law. The flexible cord must be Type VCT
or VCTF, 3-conductor, 1.00 mm2 conductor size. The wall
plug must be a two-pole grounding type with a Japanese
Industrial Standard C8303 (7 A, 125 V) configuration.
Maintenance and Service Guide
B–3
268135-002.book Page 1 Thursday, October 24, 2002 4:10 PM
C
Screw Listing
This appendix provides specification and reference information
for the screws used in the computer. All screws listed in this
appendix are available in the Miscellaneous Screw Kit, spare part
number 285290-001.
Maintenance and Service Guide
C–1
268135-002.book Page 2 Thursday, October 24, 2002 4:10 PM
Screw Listing
Table C-1
Phillips M3.0 × 4.0 Screw
Color
Qty.
Length
Thread
Head
Width
Black
3
4.0 mm
3.0 mm
5.0 mm
Where used:
One screw that secures the hard drive to the computer
(documented in Section 5.3)
Figure C-1. Phillips M3.0 × 4.0 Screw Location
C–2
Maintenance and Service Guide
268135-002.book Page 3 Thursday, October 24, 2002 4:10 PM
Screw Listing
Table C-1
Phillips M3.0 × 4.0 Screw (Continued)
Color
Qty.
Length
Thread
Head
Width
Black
3
4.0 mm
3.0 mm
5.0 mm
Where used:
Two screws that secure the hard drive bezel to the hard drive
(documented in Section 5.3)
Figure C-2. Phillips M3.0 × 4.0 Screw Locations
Maintenance and Service Guide
C–3
268135-002.book Page 4 Thursday, October 24, 2002 4:10 PM
Screw Listing
Table C-2
Phillips M2.0 × 5.5 Screw
Color
Qty.
Length
Thread
Head
Width
Silver
2
5.5 mm
2.0 mm
4.0 mm
Where used:
Two screws that secure the connector cover to the computer
(documented in Section 5.7)
Figure C-3. Phillips M2.0 × 5.5 Screw Locations
C–4
Maintenance and Service Guide
268135-002.book Page 5 Thursday, October 24, 2002 4:10 PM
Screw Listing
Table C-2
Phillips M2.0 × 5.5 Screw (Continued)
Color
Qty.
Length
Thread
Head
Width
Black
2
5.5 mm
2.0 mm
4.0 mm
Where used:
Two screws that secure the system board to the base enclosure on each side of
the MultiBay connector (documented in Section 5.18)
Figure C-4. Phillips M2.0 × 5.5 Screw Locations
Maintenance and Service Guide
C–5
268135-002.book Page 6 Thursday, October 24, 2002 4:10 PM
Screw Listing
Table C-3
Phillips M2.0 × 10.0 Screw
Color
Qty.
Length
Thread
Head
Width
Black
4
10.0 mm
2.0 mm
4.0 mm
Where used:
Two screws that secure the LED cover to the computer
(documented in Section 5.8)
Figure C-5. Phillips M2.0 × 10.0 Screw Locations
C–6
Maintenance and Service Guide
268135-002.book Page 7 Thursday, October 24, 2002 4:10 PM
Screw Listing
Table C-3
Phillips M2.0 × 10.0 Screw (Continued)
Color
Qty.
Length
Thread
Head
Width
Black
4
10.0 mm
2.0 mm
4.0 mm
Where used:
Two screws that secure the display hinge covers and display assembly to the
computer (documented in Section 5.10)
Figure C-6. Phillips M2.0 × 10.0 Screw Locations
Maintenance and Service Guide
C–7
268135-002.book Page 8 Thursday, October 24, 2002 4:10 PM
Screw Listing
Table C-4
Phillips M2.0 × 4.0 Screw
Color
Qty.
Length
Thread
Head
Width
Gold
13
4.0 mm
2.0 mm
4.0 mm
Where used:
Two screws that secure the keyboard shield to the computer
(documented in Section 5.9)
Figure C-7. Phillips M2.0 × 4.0 Screw Locations
C–8
Maintenance and Service Guide
268135-002.book Page 9 Thursday, October 24, 2002 4:10 PM
Screw Listing
Table C-4
Phillips M2.0 × 4.0 Screw (Continued)
Color
Qty.
Length
Thread
Head
Width
Gold
13
4.0 mm
2.0 mm
4.0 mm
Where used:
One screw that secures the top cover to the base enclosure in the hard drive
bay (documented in Section 5.11)
Figure C-8. Phillips M2.0 × 4.0 Screw Locations
Maintenance and Service Guide
C–9
268135-002.book Page 10 Thursday, October 24, 2002 4:10 PM
Screw Listing
Table C-4
Phillips M2.0 × 4.0 Screw (Continued)
Color
Qty.
Length
Thread
Head
Width
Gold
13
4.0 mm
2.0 mm
4.0 mm
Where used:
1 Two screws that secure the top cover to the base enclosure near the fan
assembly (documented in Section 5.11)
2 Two screws that secure the top cover to the base enclosure through the rear
panel (documented in Section 5.11)
Figure C-9. Phillips M2.0 × 4.0 Screw Locations
C–10
Maintenance and Service Guide
268135-002.book Page 11 Thursday, October 24, 2002 4:10 PM
Screw Listing
Table C-4
Phillips M2.0 × 4.0 Screw (Continued)
Color
Qty.
Length
Thread
Head
Width
Gold
13
4.0 mm
2.0 mm
4.0 mm
Where used:
One screw that secures the speaker assembly to the top cover
(documented in Section 5.12)
NEW FOR 1.2 RELEASE
Figure C-10. Phillips M2.0 × 4.0 Screw Locations
Maintenance and Service Guide
C–11
268135-002.book Page 12 Thursday, October 24, 2002 4:10 PM
Screw Listing
Table C-4
Phillips M2.0 × 4.0 Screw (Continued)
Color
Qty.
Length
Thread
Head
Width
Gold
13
4.0 mm
2.0 mm
4.0 mm
Where used:
Two screws that secure the display release assembly to the top cover
(documented in Section 5.13)
Figure C-11. Phillips M2.0 × 4.0 Screw Locations
C–12
Maintenance and Service Guide
268135-002.book Page 13 Thursday, October 24, 2002 4:10 PM
Screw Listing
Table C-4
Phillips M2.0 × 4.0 Screw (Continued)
Color
Qty.
Length
Thread
Head
Width
Gold
13
4.0 mm
2.0 mm
4.0 mm
Where used:
Four screws that secure the TouchPad bracket to the top cover
(documented in Section 5.14)
Figure C-12. Phillips M2.0 × 4.0 Screw Locations
Maintenance and Service Guide
C–13
268135-002.book Page 14 Thursday, October 24, 2002 4:10 PM
Screw Listing
Table C-5
Phillips M2.5 × 9.0 Screw
Color
Qty.
Length
Thread
Head
Width
Black
2
9.0 mm
2.5 mm
4.0 mm
Where used:
Two screws that secure the display assembly to the computer through the rear
panel (documented in Section 5.10)
Figure C-13. Phillips M2.5 × 9.0 Screw Locations
C–14
Maintenance and Service Guide
268135-002.book Page 15 Thursday, October 24, 2002 4:10 PM
Screw Listing
Table C-6
Phillips M2.0 × 8.0 Screw
Color
Qty.
Length
Thread
Head
Width
Black
14
8.0 mm
2.0 mm
4.0 mm
Where used:
Nine screws that secure the top cover to the base enclosure through the bottom
of the computer (documented in Section 5.11)
Figure C-14. Phillips M2.0 × 8.0 Screw Locations
Maintenance and Service Guide
C–15
268135-002.book Page 16 Thursday, October 24, 2002 4:10 PM
Screw Listing
Table C-6
Phillips M2.0 × 8.0 Screw (Continued)
Color
Qty.
Length
Thread
Head
Width
Black
14
8.0 mm
2.0 mm
4.0 mm
Where used:
Two screws that secure the top cover to the base enclosure
(documented in Section 5.11)
Figure C-15. Phillips M2.0 × 8.0 Screw Locations
C–16
Maintenance and Service Guide
268135-002.book Page 17 Thursday, October 24, 2002 4:10 PM
Screw Listing
Table C-6
Phillips M2.0 × 8.0 Screw (Continued)
Color
Qty.
Length
Thread
Head
Width
Black
14
8.0 mm
2.0 mm
4.0 mm
Where used:
Two screws that secure the left and right display supports to the base enclosure
(documented in Section 5.18)
Figure C-16. Phillips M2.0 × 8.0 Screw Locations
Maintenance and Service Guide
C–17
268135-002.book Page 18 Thursday, October 24, 2002 4:10 PM
Screw Listing
Table C-6
Phillips M2.0 × 8.0 Screw (Continued)
Color
Qty.
Length
Thread
Head
Width
Black
14
8.0 mm
2.0 mm
4.0 mm
Where used:
Two screws that secure the system board to the base enclosure through the
processor support bracket (documented in Section 5.18)
Figure C-17. Phillips M2.0 × 8.0 Screw Locations
C–18
Maintenance and Service Guide
268135-002.book Page 1 Thursday, October 24, 2002 4:10 PM
Index
A
C
AC adapter
specifications 6–13
Advanced Port Replicator,
spare part number 3–18
audio troubleshooting 2–25
cables, service considerations
4–2
caps lock light 1–13
CD-ROM drive
OS loading problems 2–24
specifications 6–10
CD-RW drive, specifications
6–12
Common Port Replicator,
spare part number 3–18
Compaq Diagnostics 2–1, 2–7
components
bottom 1–14
front 1–6
keyboard 1–10
left side 1–8
real panel 1–8
right side 1–6
top 1–12
Computer Setup
Advanced Menu 2–5
File Menu 2–3
overview 2–1
Security Menu 2–4
computer specifications 6–1
connector cover
illustrated 3–14
location 1–14
removal 5–15
B
base enclosure, spare part
numbers 3–13
battery bay 1–7, 1–15
battery bezel
removal 5–5
spare part numbers 3–13,
5–5
battery light 1–7
battery pack
removal 5–4
spare part numbers 3–11
battery power light 1–13
battery release latch 1–15, 5–4
battery specifications 6–13
battery, real time clock (RTC)
removal 5–42
spare part number 3–9,
5–42
bottom components 1–14
Maintenance and Service Guide
Index–1
268135-002.book Page 2 Thursday, October 24, 2002 4:10 PM
Index
connector pin assignments
external monitor connector
A–5
headphone jack A–6
microphone jack A–6
modem connector A–2
monitor connector A–5
network connector A–1
parallel connector A–4
RJ-11 jack A–2
RJ-45 jack A–1
speaker jack A–6
S-video A–3
USB connector A–2
connectors, service
considerations 4–2
cursor control keys 1–11
D
DC power jack 1–9
design overview 1–16
diagnostics
configuration information
2–7
test information 2–8
digital audio button 1–13
disassembly sequence chart
5–2
diskette drive
OS loading problems 2–23
spare part number 3–13,
3–17
specifications 6–9
Index–2
display
illustrated 3–2
removal 5–22
spare part numbers 3–3,
5–22
specifications 6–3, 6–4,
6–5, 6–6
display lid switch 1–12
display release assembly
illustrated 3–14
removal 5–33
display release latch 1–7
display support
illustrated 3–14
removal 5–45
DMA specifications 6–14
docking connector 1–14
docking connector cover,
illustrated 3–14
docking station,
troubleshooting 2–18
drive indicator light 1–13
drives, preventing damage 4–3
DVD-ROM drive
OS loading problems 2–24
specifications 6–11
E
Easy Access Buttons 1–12
EasyScroll 1–13
electrostatic discharge 4–4,
4–7
embedded numeric keypad
1–11
Maintenance and Service Guide
268135-002.book Page 3 Thursday, October 24, 2002 4:10 PM
Index
external monitor connector
location 1–9
pin assignments A–5
F
fan
removal 5–38
spare part number 3–9,
5–38
fan channel
illustrated 3–14
removal 5–46
features 1–2
feet
illustrated 3–14
locations 5–9
Fn key 1–11
front components 1–6
function keys 1–10
G
grounding equipment and
methods 4–6
H
hard drive
OS loading problems 2–20
removal 5–7, 5–8
spare part numbers 3–9,
3–17
specifications 6–7
hard drive bay 1–7, 1–15
hard drive bezel
removal 5–8
spare part numbers 3–9
hard drive retention screw
1–15
Maintenance and Service Guide
headphone jack
location 1–9
pin assignments A–6
hinge covers
illustrated 3–14
removal 5–25
I
I/O address specifications
6–16
illustrated parts catalog 3–1
infrared port 1–8
interrupt specifications 6–15
K
keyboard
illustrated 3–2
removal 5–18
spare part numbers 3–7,
5–18
troubleshooting 2–28
keyboard components 1–10
keyboard shield
illustrated 3–14
removal 5–20
L
LED cover
illustrated 3–2
removal 5–16
spare part number 3–5,
5–16
left side components 1–8
Logo Kit, spare part number
3–18
Index–3
268135-002.book Page 4 Thursday, October 24, 2002 4:10 PM
Index
M
mass storage devices 3–16
memory expansion board
replacement 5–9
spare part numbers 3–13
memory expansion
compartment 1–15
memory expansion
compartment cover
illustrated 3–14
removal 5–10
memory map specifications
6–19
microphone 1–13
microphone jack
location 1–9
pin assignments A–6
mini PCI board
removal 5–12
spare part numbers 3–13
mini PCI compartment 1–15
mini PCI compartment cover
illustrated 3–14
removal 5–13
Miscellaneous Cable Kit
components 3–11
spare part number 3–11
Miscellaneous
Plastics/Hardware Kit
components 3–14, 3–15
spare part numbers 3–5,
3–15
Index–4
modem
removal 5–12
spare part numbers 3–13
troubleshooting 2–30
modem cable
removal 5–49
spare part number 3–11
modem connector
location 1–9
pin assignments A–2
monitor connector
location 1–9
pin assignments A–5
MultiBay 1–9, 1–15
MultiBay battery pack, spare
part number 3–13
MultiBay device
removal 5–6
spare part numbers 3–13
MultiBay release latch 1–15,
5–6
MultiBay weight saver 3–14
N
network connector
location 1–9
pin assignment A–1
network, troubleshooting 2–30
nonfunctioning device,
troubleshooting 2–18, 2–27
num lock key 1–10
num lock light 1–12
numeric keypad 1–11
Maintenance and Service Guide
268135-002.book Page 5 Thursday, October 24, 2002 4:10 PM
Index
O
R
operating system loading,
troubleshooting 2–19
optical drive, spare part
numbers 3–13, 3–17
real time clock (RTC) battery
removal 5–42
spare part number 3–9,
5–42
rear panel components 1–8
removal and replacement
preliminaries 4–1
procedures 5–1
right side components 1–6
RJ-11 jack
location 1–9
pin assignments A–2
RJ-45 jack
location 1–9
pin assignments A–1
RTC battery
removal 5–42
spare part number 3–9,
5–42
P
packing precautions 4–4
parallel connector
location 1–8
pin assignments A–4
parts catalog 3–1
password, clearing 1–4
PC Card bezel
illustrated 3–14
removal 5–48
PC Card eject button 1–9
PC Card slot 1–9
PC Card slot space saver 3–14
plastic parts 4–2
pointing device,
troubleshooting 2–29
power button 1–13
power cord, spare part
numbers 3–18, 3–19
power light 1–12
power management features
1–5
power, troubleshooting 2–12
power/Standby light 1–6, 1–13
processor
removal 5–40
spare part numbers 3–11,
5–40
Maintenance and Service Guide
S
Screw Kit, spare part number
3–19
security cable slot 1–7
serial number 1–15, 3–1, 5–2
service considerations 4–2
speaker assembly
removal 5–31
spare part number 3–9
speaker jack
location 1–9
pin assignments A–6
speakers 1–6
Index–5
268135-002.book Page 6 Thursday, October 24, 2002 4:10 PM
Index
specifications
AC adapter 6–13
battery 6–13
CD-ROM drive 6–10
CD-RW drive 6–12
computer 6–1
diskette drive 6–9
display 6–3, 6–4, 6–5, 6–6
DMA 6–14
DVD-ROM drive 6–11
hard drive 6–7
I/O addresses 6–16
interrupts 6–15
memory map 6–19
static shielding materials 4–8
stereo speaker jack
location 1–9
pin assignments A–6
S-Video connector
location 1–9
pin assignments A–3
system board
removal 5–44
spare part numbers 3–11,
5–44
system memory map 6–19
T
tools required 4–1
top components 1–12
top cover
removal 5–26
spare part numbers 3–9,
5–26
Index–6
TouchButton board
removal 5–35
spare part numbers 3–9,
5–35
TouchPad
location 1–13
removal 5–35
spare part number 3–9,
5–35
TouchPad bracket
illustrated 3–14
removal 5–36
TouchPad buttons 1–13
transporting precautions 4–4
troubleshooting
audio 2–25
Compaq Diagnostics 2–7
Computer Setup 2–2
docking station 2–18
flowcharts 2–10
keyboard 2–28
modem 2–30
network 2–30
nonfunctioning device
2–18, 2–27
operating system loading
2–19
overview 2–1
pointing device 2–29
power 2–12
video 2–16
Maintenance and Service Guide
268135-002.book Page 7 Thursday, October 24, 2002 4:10 PM
Index
U
W
universal serial bus (USB)
connector
location 1–9
pin assignments A–2
Windows application key
1–11
Windows logo key 1–11
workstation precautions 4–5
V
vents 1–7, 1–8, 1–14
video troubleshooting 2–16
volume control buttons 1–13
Maintenance and Service Guide
Index–7