Designed to be used by itself or as a supplement... Output is monitored via two 5-segment, multi-colored

Designed to be used by itself or as a supplement... Output is monitored via two 5-segment, multi-colored
5-Year Warranty
Hand-built in
Webster, NY
6-Channel, Stereo Microphone Mixer
Designed to be used by itself or as a supplement to
larger mixing consoles, the 206 provides superior
audio performance in a single rack-space package.
Equally at home in either fixed or portable
installations, the 206 may be used anywhere where
additional microphone inputs are needed. Typical
applications include live sound reinforcement,
broadcast, recording, and film/video production.
The 206 is a rack-mountable six input channel stereo
microphone mixer offering up to 84dB of gain for
distant mic placements or extremely low-level signals.
Ultra low-noise, studio-grade discrete mic preamps
are utilized. Each channel has a switchable 20dB pad,
a 3-position mic gain switch input level and pan
controls, and clip LED indicators, 48V phantom power
may be switched in for use with condenser mics. A
separate Stereo Line In volume control adjusts line
level sources, such as a CD or MP3 player, connected
to rear-panel RCA inputs or portable audio source
connected to the 3.5mm jack located on the front
panel. Since plenty of headroom has been designed
into the 206, even the loudest signals can be handled
without distortion.
Output is monitored via two 5-segment, multi-colored
LED meters, along with separate Peak Clip Indicators.
The transformer-isolated XLR balanced mono output
is capable of driving +24dBu into 600 Ohms, and
separate stereo TRS 1/4" outputs may be used either
balanced or unbalanced. A Stereo Line Out is available
on RCA jacks.
The 206 provides superior audio performance in a
rugged and durable package. Backed by Ashly's
exclusive Five Year Worry-Free Warranty, the MX-206
is designed to provide many years of trouble-free
206 Features:
• C onvenient, 3.5mm stereo line in jack on front panel
for MP3 players and smartphones
• High-gain mic preamps (60dB)
• Transformer isolated +24dBm 600 Ohm
balanced XLR-mono output
• Stereo line in/out
• Pan control on each channel
• Stereo headphone jack with level control
• 20dB input pad switch
• +48V phantom power
• Universal power supply
• Safety/Compliance: cTUVus, CE, FCC, RoHS
Note: 0dBu = 0.775 VRMS
Distortion, Hum and Noise
THD @ +20dBu, 20Hz–20kHz, input switch at -40dB
IMD (SMPTE) @ +20dBu, input switch at -40dB
Equivalent Input Hum and Noise (input switch -60dB)
Residual Output Noise, TRS Outputs (All Levels @ min)
Residual Output Noise, XLR Outputs
Master Level at nominal, (All Ch. Level controls @ min)
Master Level and 1 Ch. Level at nominal
Voltage Gain (±2dB)
Mic Input to Master Output, 600 Ohm load
Aux In to Master Output
Frequency Response
Between any inputs or outputs (20Hz–20kHz)
VU Meters
Two 5-segment LED meters, 0VU = +4dBu
Peak Clip indicator on each input
Peak Indicators
channel and L/R outputs, illuminates
3dB below clipping
Weights, Dimensions & Power
19" W x 1.75" H x 9.4" D
(483mm x 44mm x 239mm)
Unit Weight
6.8lbs (3.9kg)
Shipping Weight
11lbs (5kg)
Power Requirements
100–240 VAC, 50–60Hz, 30W
Tel. : +39/0200615928
Tel. : +39/0692956098
Email :[email protected]
Web :
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF