User guide | Compaq 5000R Computer Monitor User Manual

Flat Panel Monitor (TFT5000R)
Rackmount
User Guide
First Edition (October 1999)
Part Number 141559-001
Compaq Computer Corporation
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor (TFT5000R) Rackmount User Guide Comments:
Part Number: 141559-001 File Name: a-frnt Last Saved On: 8/3/99 1:41 PM
Notice
The information in this publication is subject to change without notice.
COMPAQ COMPUTER CORPORATION SHALL NOT BE LIABLE FOR TECHNICAL OR
EDITORIAL ERRORS OR OMISSIONS CONTAINED HEREIN, NOR FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE FURNISHING, PERFORMANCE, OR
USE OF THIS MATERIAL. THIS INFORMATION IS PROVIDED “AS IS” AND COMPAQ
COMPUTER CORPORATION DISCLAIMS ANY WARRANTIES, EXPRESS, IMPLIED OR
STATUTORY AND EXPRESSLY DISCLAIMS THE IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, GOOD TITLE AND AGAINST
INFRINGEMENT.
This publication contains information protected by copyright. No part of this publication may be
photocopied or reproduced in any form without prior written consent from Compaq Computer
Corporation.
© 1999 Compaq Computer Corporation.
All rights reserved. Printed in the U.S.A.
The software described in this guide is furnished under a license agreement or nondisclosure agreement.
The software may be used or copied only in accordance with the terms of the agreement.
Compaq, Deskpro, Fastart, Compaq Insight Manager, Systempro, Systempro/LT, ProLiant, ROMPaq,
QVision, SmartStart, NetFlex, QuickFind, PaqFax, ProSignia, EnergyStar, registered United States
Patent and Trademark Office.
Neoserver, Netelligent, Systempro/XL, SoftPaq, QuickBlank, QuickLock are trademarks and/or service
marks of Compaq Computer Corporation.
Microsoft, MS-DOS, Windows, and Windows NT are registered trademarks of Microsoft Corporation.
Pentium is a registered trademark and Xeon is a trademark of Intel Corporation.
Other product names mentioned herein may be trademarks and/or registered trademarks of their
respective companies.
Compaq Flat Panel Monitor (TFT5000R) Rackmount User Guide
First Edition (October 1999)
Part Number 141559-001
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor (TFT5000R) Rackmount User Guide Comments:
Part Number: 141559-001 File Name: a-frnt Last Saved On: 8/3/99 1:41 PM
Contents
About This Guide
Text Conventions.......................................................................................................vii
Symbols in Text....................................................................................................... viii
Symbols on Equipment............................................................................................ viii
Rack Stability .............................................................................................................ix
Getting Help ................................................................................................................x
Compaq Technical Support ..................................................................................x
Compaq Website .................................................................................................xi
Compaq Authorized Reseller...............................................................................xi
Chapter 1
Introduction
Monitor Features...................................................................................................... 1-1
Graphics Driver ....................................................................................................... 1-2
Chapter 2
Installing the Monitor
Installing the Retractable Tray................................................................................. 2-1
Attaching the Cable Management Arm ............................................................ 2-6
Using the Sliding Shelf..................................................................................... 2-8
Removing the TFT5000R ...................................................................................... 2-10
Using the Fixed Mounting Bracket........................................................................ 2-11
Using the Stabilizing Bracket ................................................................................ 2-16
Setting Up the Monitor .......................................................................................... 2-17
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor (TFT5000R) Rackmount User Guide Comments:
Part Number: 141559-001 File Name: a-frnt Last Saved On: 8/3/99 1:41 PM
iv
Compaq Flat Panel Monitor (TFT5000R) Rackmount User Guide
Chapter 3
Operating the Monitor
On-Screen Display Settings ..................................................................................... 3-1
Adjusting the Settings .............................................................................................. 3-5
Special OSD Messages ..................................................................................... 3-6
Using Sleep Timer Mode ......................................................................................... 3-6
Adjusting Screen Quality ......................................................................................... 3-7
Optimizing Digital Conversion......................................................................... 3-7
Display Resolutions ................................................................................................. 3-8
User Modes....................................................................................................... 3-9
Energy Saver Feature............................................................................................... 3-9
Care and Maintenance............................................................................................ 3-11
Protecting the Monitor .................................................................................... 3-11
Cleaning the Monitor ...................................................................................... 3-12
Shipping the Monitor ............................................................................................. 3-12
Appendix A
Regulatory Compliance Notices
Regulatory Compliance Identification Numbers..................................................... A-1
Federal Communications Commission Notice........................................................ A-2
Class A Equipment .......................................................................................... A-2
Class B Equipment........................................................................................... A-3
Modifications................................................................................................... A-4
Cables .............................................................................................................. A-4
Canadian Notice (Avis Canadien)........................................................................... A-4
Class A Equipment .......................................................................................... A-4
Class B Equipment........................................................................................... A-4
European Union Notice........................................................................................... A-5
Japanese Notice....................................................................................................... A-5
Taiwanese Notice.................................................................................................... A-5
German Ergonomics Notice.................................................................................... A-6
EPA EnergyStar Compliance.................................................................................. A-6
Appendix B
Electrostatic Discharge
Precautions.............................................................................................................. B-1
Grounding Methods ................................................................................................ B-2
Appendix C
Power Cord Set Requirements
General Requirements............................................................................................. C-1
Country-Specific Requirements .............................................................................. C-2
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor (TFT5000R) Rackmount User Guide Comments:
Part Number: 141559-001 File Name: a-frnt Last Saved On: 8/3/99 1:41 PM
Contents
Appendix D
Specifications
Compaq TFT 5000R Flat Panel Monitor .................................................................D-1
Color Display Values...............................................................................................D-2
Connector Pin Assignments.....................................................................................D-3
Index
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor (TFT5000R) Rackmount User Guide Comments:
Part Number: 141559-001 File Name: a-frnt Last Saved On: 8/3/99 1:41 PM
v
About This Guide
This guide provides step-by-step instructions for installation of the Compaq
Flat Panel Monitor (TFT5000R) Rackmount. It also provides instructions for
adjusting the settings and operating the monitor.
Text Conventions
This document uses the following conventions to distinguish elements of text:
Keys
Keys appear in boldface. A plus sign (+) between
two keys indicates that they should be pressed
simultaneously.
USER INPUT
User input appears in a different typeface and in
uppercase.
FILENAMES
File names appear in uppercase italics.
Menu Options,
Command Names,
Dialog Box Names
These elements appear in initial capital letters.
COMMANDS,
DIRECTORY NAMES,
and DRIVE NAMES
These elements appear in uppercase.
Type
When you are instructed to type information, type
the information without pressing the Enter key.
Enter
When you are instructed to enter information, type
the information and then press the Enter key.
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor (TFT5000R) Rackmount User Guide Comments:
Part Number: 141559-001 File Name: a-frnt Last Saved On: 8/3/99 1:41 PM
viii
Compaq Flat Panel Monitor (TFT5000R) Rackmount User Guide
Symbols in Text
These symbols may be found in the text of this guide. They have the following
meanings.
WARNING: Text set off in this manner indicates that failure to follow directions
in the warning could result in bodily harm or loss of life.
CAUTION: Text set off in this manner indicates that failure to follow directions
could result in damage to equipment or loss of information.
IMPORTANT: Text set off in this manner presents clarifying information or specific
instructions.
NOTE: Text set off in this manner presents commentary, sidelights, or interesting points
of information.
Symbols on Equipment
These icons may be located on equipment in areas where hazardous conditions
may exist.
Any surface or area of the equipment marked with these symbols
indicates the presence of electrical shock hazards. Enclosed area
contains no operator serviceable parts.
WARNING: To reduce the risk of injury from electrical shock hazards,
do not open this enclosure.
Any RJ-45 receptacle marked with these symbols indicates a Network
Interface Connection.
WARNING: To reduce the risk of electrical shock, fire, or damage to
the equipment, do not plug telephone or telecommunications
connectors into this receptacle.
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor (TFT5000R) Rackmount User Guide Comments:
Part Number: 141559-001 File Name: a-frnt Last Saved On: 8/3/99 1:41 PM
Contents
Any surface or area of the equipment marked with these symbols
indicates the presence of a hot surface or hot component. If this
surface is contacted, the potential for injury exists.
WARNING: To reduce the risk of injury from a hot component, allow
the surface to cool before touching.
Power Supplies or Systems marked with these symbols
indicate the equipment is supplied by multiple sources of
power.
WARNING: To reduce the risk of injury from electrical shock,
remove all power cords to completely disconnect power from
the system.
Rack Stability
WARNING: To reduce the risk of personal injury or damage to the equipment,
be sure that:
■
The leveling jacks are extended to the floor.
■
The full weight of the rack rests on the leveling jacks.
■
The stabilizing feet are attached to the rack, if it is a single rack
installation.
■
The racks are coupled in multiple rack installations.
■
A rack may become unstable if more than one component is extended for
any reason. Extend only one component at a time.
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor (TFT5000R) Rackmount User Guide Comments:
Part Number: 141559-001 File Name: a-frnt Last Saved On: 8/3/99 1:41 PM
ix
x
Compaq Flat Panel Monitor (TFT5000R) Rackmount User Guide
Getting Help
If you have a problem and have exhausted the information in this guide, you
can get further information and other help in the following locations.
Compaq Technical Support
In North America, call the Compaq Technical Phone Support Center at
1
1-800-OK-COMPAQ . This service is available 24 hours a day, 7 days a week.
Outside North America, call the nearest Compaq Technical Support Phone
Center. Telephone numbers for worldwide Technical Support Centers are
listed on the Compaq website. Access the Compaq website at:
http://www.compaq.com
Be sure to have the following information available before you call Compaq:
1
■
Technical support registration number (if applicable)
■
Product serial numbers
■
Product model names and numbers
■
Applicable error messages
■
Add-on boards or hardware
■
Third-party hardware or software
■
Operating system type and revision level
■
Detailed, specific questions
For continuous quality improvement, calls may be recorded or monitored.
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor (TFT5000R) Rackmount User Guide Comments:
Part Number: 141559-001 File Name: a-frnt Last Saved On: 8/3/99 1:41 PM
Contents
Compaq Website
The Compaq website has information on this product as well as the latest
drivers and Flash ROM images. You can access the Compaq website at:
http://www.compaq.com
Compaq Authorized Reseller
For the name of your nearest Compaq authorized reseller:
■
In the United States, call 1-800-345-1518.
■
In Canada, call 1-800-263-5868.
■
Elsewhere, see the Compaq website for locations and telephone
numbers.
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor (TFT5000R) Rackmount User Guide Comments:
Part Number: 141559-001 File Name: a-frnt Last Saved On: 8/3/99 1:41 PM
xi
Chapter
1
Introduction
The Flat Panel Monitor Rackmount (TFT5000R) is a convenient
rack-mountable system for easy monitor storage and access. Use the fixed
position mounting bracket to attach the monitor to the front of your rack for
constant access.
The retractable assembly occupies 2Us of Compaq rack space and can be used
with all Compaq Rack Series servers. The fixed mounting bracket assembly
occupies 8Us of Compaq rack space and can be used with all Compaq Rack
Series servers.
The Compaq TFT5000 Flat Panel Monitor has a 15-inch (38.1 cm) flat panel
screen with an active matrix, thin-film transistor (TFT), liquid crystal display
(LCD).
Monitor Features
The monitor features include:
■
15-inch (38.1 cm) viewable area display
■
1024 x 768 resolution, plus full-screen support for lower resolutions
■
Plugs into a standard VGA connector; does not require a special
graphics adapter card
■
Plug and Play capability if supported by your system
■
Programmable Sleep Timer
■
Energy Saver feature
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-xx1 File Name: b-ch1 Introduction Last Saved On: 8/3/99 11:24 AM
1-2
Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide
■
On-Screen Display (OSD) adjustments in six different languages:
!
English
!
Dutch
!
French
!
German
!
Italian
!
Spanish
■
Asset Control
■
Wide viewing angle to allow viewing from a standing position or
moving side-to-side
■
Compliant with the following regulated specifications:
!
Swedish MPR II 1990
!
EPA EnergyStar
!
European Union CE Directives
!
Swedish TCO 1995
Graphics Driver
This monitor may require a graphics driver (and/or .INF file) that is
compatible with your computer’s graphics adapter. Compaq has created a
Universal Driver Manager (UDM) release that supports all Compaq QVision,
S3, Cirrus Logic, and Matrox graphics adapters found on Compaq products.
The UDM eases graphic driver deployment across Compaq platforms,
ensuring cross-compatibility and backward-compatibility. The resulting
solution lets you manage and control ongoing software maintenance costs. The
UDM is available on the Support Software CD for Compaq products and the
Compaq website at:
http://www.compaq.com
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-xx1 File Name: b-ch1 Introduction Last Saved On: 8/3/99 11:24 AM
Chapter
2
Installing the Monitor
Installing the Retractable Tray
The TFT5000R retractable tray attaches to the mounting brackets with sliding
rails to allow easy storage and access to the monitor.
To install the retractable tray:
1. Determine the rack position of the TFT5000R retractable tray from the
printed report generated by the Rack Builder Pro software.
2. Use the template to mark the attachment points for the mounting
brackets and cage nuts on the front and rear of the rack frame.
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: c-ch2 Installing the Monitor Last Saved On: 8/3/99 11:29 AM
2-2
Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide
3. Mark the rack at the top of the template to help align the next
component.
Figure 2-1. Measuring with the 2U template
4. Insert cage nuts into the rack 1 in each of the marked holes in the front
and the rear of the rack.
5. Insert a rail mounting bracket into the rack and hook the tabs into the
appropriate holes in the rear of the rack 2, aligning the screw holes at
the front of the rack.
Figure 2-2. Inserting the cage nuts and attaching the rail mounting brackets
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: c-ch2 Installing the Monitor Last Saved On: 8/3/99 11:29 AM
Installing the Monitor
6. Attach the mounting bracket to the front of the rack using two M6
screws. The tabs on the front of the mounting bracket help to align it
with the front of the rack frame.
Figure 2-3. Attaching the mounting bracket to the front of the rack
7. Attach the latch bracket 1 to each mounting bracket with the latch
receptacle (located in the center of the latch bracket) facing the front of
the rack.
8. Slide the bracket over the lower guide tab, then align the thumbscrew 2
with the lower hole of each rail and push in.
9. Turn the thumbscrew 3 to tighten.
1
3
2
Figure 2-4. Attaching the latch bracket
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: c-ch2 Installing the Monitor Last Saved On: 8/3/99 11:29 AM
2-3
2-4
Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide
10. Use your thumbs to push in on the tray cover tabs on the back of the
tray, then lift off the tray cover.
a. Remove any packing material.
b. Unbundle the VGA cord and thread it through the hole in the rear of
the tray.
c. Lift the AC adapter, remove the paper from the tape, then secure the
AC adapter to the tray.
d. Connect the power cord to the AC adapter and thread it through the
hole in the rear of the tray.
e. Replace the tray cover.
NOTE: Be sure these steps are completed BEFORE installing the tray assembly into the
rack.
Figure 2-5. Removing the tray cover
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: c-ch2 Installing the Monitor Last Saved On: 8/3/99 11:29 AM
Installing the Monitor
11. Fully extend the slide rails on the retractable tray assembly, then align
them with the mounting bracket rails. Slide the tray assembly into the
rack until it locks into place.
Figure 2-6. Inserting the retractable tray into the rack
12. Insert the retma rail covers over the front rails, aligning the holes with
the previously installed cage nuts. Secure each cover with one M6
screw.
1
2
Figure 2-7. Attaching the retma rail covers
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: c-ch2 Installing the Monitor Last Saved On: 8/3/99 11:29 AM
2-5
2-6
Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide
Attaching the Cable Management Arm
The cable management arm attaches to the rear of the tray on the right side.
From the rear of the rack:
1. Line up the thumbscrews in the cable management arm with the holes in
the retractable tray.
2. Push in the thumbscrews, then tighten.
Figure 2-8. Attaching the cable management arm to the retractable tray
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: c-ch2 Installing the Monitor Last Saved On: 8/3/99 11:29 AM
Installing the Monitor
3. Align the cable management arm with the cage nuts previously installed
in the rear of the rack.
4. Attach the cable management arm using two M-6 screws.
2
1
Figure 2-9. Attaching the cable management arm to the rear of the rack
5. Route the cables along the cable management arm. Secure the cables
using the fasteners provided.
Figure 2-10. Attaching the cables to the cable management arm
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: c-ch2 Installing the Monitor Last Saved On: 8/3/99 11:29 AM
2-7
2-8
Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide
Using the Sliding Shelf
To store the monitor:
1. Tilt the monitor back so that it rests flat in the retractable tray.
2. Slide the tray into the rack until the latch is engaged.
Figure 2-11. Using the retractable tray
To access the monitor:
1. Push in on the center of the plastic frame to release.
2. Pull the tray out until it is fully extended.
Figure 2-12. Accessing the monitor
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: c-ch2 Installing the Monitor Last Saved On: 8/3/99 11:29 AM
Installing the Monitor
3. Tilt the monitor up to the desired viewing angle.
Figure 2-13. Setting the monitor viewing angle
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: c-ch2 Installing the Monitor Last Saved On: 8/3/99 11:29 AM
2-9
2-10
Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide
Removing the TFT5000R
To remove the TFT5000R from the rack:
1. Detach cables from the cable management arm.
2. Remove the cable management arm.
3. Fully extend the tray at the front of the rack. Hold the TFT5000R firmly
while pushing in the metal release levers on each of the mounting
brackets.
4. Pull the tray straight out and remove it.
Figure 2-14. Removing the retractable tray from the rack
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: c-ch2 Installing the Monitor Last Saved On: 8/3/99 11:29 AM
Installing the Monitor
Using the Fixed Mounting Bracket
1. Determine the best rack position for the fixed mounting bracket from the
printed report generated by the Rack Builder Pro software.
2. Use the template to mark the attachment points for the mounting
bracket.
Figure 2-15. Measuring with the 8U template
3. Insert all cage nuts into the front of the rack.
4. Set the monitor tray assembly on the edge of a flat, non-abrasive,
unobstructed surface.
CAUTION: To reduce the risk of damage to the monitor, be sure that it remains
stable at all times.
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: c-ch2 Installing the Monitor Last Saved On: 8/3/99 11:29 AM
2-11
2-12
Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide
5. Tilt the monitor up and remove the four screws 1 securing the bracket
to the monitor. Retain these screws for use in step 11.
6. Remove the monitor 2 from the tray.
Figure 2-16. Removing the monitor from the tray
7. Turn the monitor over and set it on a flat, non-abrasive, unobstructed
surface.
8. Remove the four screws 1 securing the plastic frame to the monitor and
the six screws securing the plastic bezel to the frame.
9. Remove the plastic frame 2.
1
2
Figure 2-17. Removing the plastic frame
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: c-ch2 Installing the Monitor Last Saved On: 8/3/99 11:29 AM
Installing the Monitor
10. Insert four screws (part number 125275-003) into the empty holes to
secure the monitor case to the monitor.
CAUTION: To reduce the risk of damage to the monitor, do not attempt to move
the monitor until these four screws are in place.
4
Figure 2-18. Inserting the monitor case screws
11. Place the fixed bracket on top of the monitor and secure it with the four
screws retained from step 5.
Figure 2-19. Attaching the fixed mounting bracket
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: c-ch2 Installing the Monitor Last Saved On: 8/3/99 11:29 AM
2-13
2-14
Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide
12. Place the power supply tray on the bracket on either side.
Figure 2-20. Placing the power supply tray
13. Hold the monitor with the fixed bracket at a slight angle 1.
14. Move the monitor into the rack 2.
15. Pull the monitor forward and align the holes in the fixed bracket with
the markings on the rack 3.
16. Secure the bracket to the rack with four M6 screws 4.
Figure 2-21. Attaching the fixed mounted monitor to the rack
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: c-ch2 Installing the Monitor Last Saved On: 8/3/99 11:29 AM
Installing the Monitor
17. Place the AC adapter onto the power supply tray.
Figure 2-22. Placing the AC adapter onto the power supply tray
18. Move the faceplate into position over the cage nuts and secure it to the
rack with four M6 screws.
Figure 2-23. Attaching the faceplate
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: c-ch2 Installing the Monitor Last Saved On: 8/3/99 11:29 AM
2-15
2-16
Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide
Using the Stabilizing Bracket
The stabilizing bracket lets you secure your Flat Panel Monitor Rackmount
(TFT5000R) to the rack using thumbscrews.
To install the stabilizing bracket, follow the procedures to install the Flat Panel
Monitor Rackmount (TFT5000R) Rack Option Kit except:
■
DO NOT install the lower, front screw in each of the rail mounting
brackets
■
DO NOT install the latch bracket
■
DO NOT install the retma rail covers
1. Align the top hole of the stabilizing bracket with the bottom hole of the
rail mounting bracket. If you are using the stabilizing bracket on an
existing installation, remove the lower front screw from each rail
mounting bracket 1.
2
1
1
3
2
4
Figure 2-24. Attaching the stabilizing bracket
2. Attach the Stabilizing Bracket to each side of the plastic frame using
two 8-32x1/4 screws 2.
3. Push the thumbscrew into the rack 3.
4. Turn the thumbscrew to tighten 4.
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: c-ch2 Installing the Monitor Last Saved On: 8/3/99 11:29 AM
Installing the Monitor
Setting Up the Monitor
To set up the monitor, make sure that the power to the monitor, computer
system, and other attached devices is turned off.
1. Connect the 15-pin connector of the monitor signal cable to the rear
panel of the computer. Tighten the screws.
CAUTION: Be sure the signal cable aligns with the 15-pin connector. Do not
force the cable onto the connector or you may damage the signal cable.
2. Connect the AC power cord to an electrical outlet that is easily
accessible to the monitor.
WARNING: To reduce the risk of electric shock or damage to your equipment,
do not disable the power cord grounding feature. This equipment is designed to
be connected to a grounded (earthed) power outlet that is easily accessible to
the operator. The grounding plug is an important safety feature.
CAUTION: When connecting the monitor, be sure to use the AC adapter
supplied with the monitor. Failure to use this AC adapter may result in damage
to the monitor.
CAUTION: Be sure that the power outlet you plug your power cord into is easily
accessible to the equipment operator. To disconnect power to the equipment,
be sure to unplug the power cord from the power outlet.
IMPORTANT: Always activate a screen saver program, the programmable sleep timer, or
turn off the monitor when it is not in use for a prolonged period of time. All LCD monitors
that display the same static image on the screen for a prolonged period of time may
exhibit screen image retention. Image retention is not a permanent condition and will fade
over a period of time. Image retention is a condition that may occur on all LCD screens.
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: c-ch2 Installing the Monitor Last Saved On: 8/3/99 11:29 AM
2-17
Chapter
3
Operating the Monitor
On-Screen Display Settings
The options for adjusting screen settings are located in the on-screen display
(OSD) and can be viewed in one of six available languages. The following
tables show the functions available through the main menu and advanced
menu.
Table 3-1
On-Screen Display Settings Main Menu
Menu Level 1
Menu Level 2
Menu Level 3
Brightness
Adjustment scale
N/A
Contrast
Adjustment scale
N/A
Auto Adjust
N/A
N/A
Advanced Menu
N/A
N/A
Exit
N/A
N/A
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: d-ch3 Operating the Monitor Last Saved On: 8/3/99 11:30 AM
3-2
Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide
Table 3-2
On-Screen Display Settings Advanced Menu
Menu Level 1
Menu Level 2
Menu Level 3
Brightness
Adjustment scale
N/A
Contrast
Adjustment scale
N/A
Auto Adjust
N/A
N/A
Position
Horizontal Position
Adjustment scale
Vertical Position
Adjustment scale
Cancel
Save and Return
Digital Conversion
Clock
Adjustment scale
Clock Phase
Adjustment scale
Clock Phase Fine
Adjustment scale
Cancel
Save and Return
Color
9300 K
Adjustment scale
6500 K
Adjustment scale
Custom Color
Color adjustment scale
Cancel
Save and Return
Language
Deutsch
N/A
English
Espanol
Francais
Italiano
Nederlands
Cancel
Save and Return
continued
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: d-ch3 Operating the Monitor Last Saved On: 8/3/99 11:30 AM
Operating the Monitor
Table 3-2
On-Screen Display Settings Advanced Menu continued
Menu Level 1
Menu Level 2
Menu Level 3
Management
Full Screen
No
Yes
Power Saver
No
Yes
Mode Display
No
Yes
Serial Number
Displays Serial Number
Sleep Timer
Set Time and On/Off
Times
Basic Main Menu
Cancel
Save and Return
Factory Reset
Confirm Reset
N/A
Exit
N/A
N/A
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: d-ch3 Operating the Monitor Last Saved On: 8/3/99 11:30 AM
3-3
3-4
Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide
1
2
3
4
5
Figure 3-1. Front control panel
Table 3-3
Front Control Panel
Item
➊
Control
Menu Button
Function
■
Launches first and second level on-screen
menus
■
Exits menus and on-screen display
➋
Minus Button
Selects and adjusts the functions
➌
Plus Button
Selects and adjusts the functions
➍
Power Switch
Turns the monitor on and off
➎
Power LED
■
Green indicates monitor is turned on.
■
Yellow indicates suspend mode.
■
Amber indicates sleep mode.
■
Blinking green/amber indicates
programmable sleep mode.
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: d-ch3 Operating the Monitor Last Saved On: 8/3/99 11:30 AM
Operating the Monitor
Adjusting the Settings
To launch the on-screen display Main Menu:
1. Press the Menu button 1 on the monitor’s front panel. The Main Menu
displays on the monitor screen.
2. To select a menu item, scroll down by pressing the Minus (-) button 2,
or scroll up by pressing the Plus (+) button 3.
3. Press the Menu button 1 again to select your choice. A second-level
menu with expanded menu items displays.
4. Use the Plus (+) or Minus (-) buttons to highlight your choice, then
select Save and Return. To void any changes made, select Cancel
instead of Save and Return.
To launch the Advanced Menu:
1. Select the Advanced Main Menu from the Main Menu or press the
Menu button twice.
2. To select a menu item, scroll down by pressing the Minus (-) button 2,
or scroll up by pressing the Plus (+) button 3.
3. Press the Menu button 1 again to select your choice.
NOTE: Selecting the Advanced Menu from the Main Menu resets the on-screen display to
default to the Advanced Menu each time the monitor is powered on. The Advanced Menu
remains the default menu until the Basic Main Menu option is selected from the Advanced
Menu.
4. A second level menu displays with expanded menu items. Use the
Plus (+) or Minus (-) buttons to highlight your choice, then select Save
and Return. To void any changes made, select Cancel instead of Save
and Return.
NOTE: The second level menu for brightness and contrast displays an adjustment screen.
Use the Minus button to decrease or the Plus button to increase the screen brightness and
contrast.
5. Access the third level menu by selecting a function and pressing the
Menu button. Adjust the third level menu displays using the same
procedures as the second level.
6. To exit from the on-screen menu, select Exit from the Advanced Menu.
If the display is a second or third level menu, select Save and Return or
Cancel, then select Exit from the Advanced Menu.
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: d-ch3 Operating the Monitor Last Saved On: 8/3/99 11:30 AM
3-5
3-6
Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide
Special OSD Messages
OSD messages appear on the screen to identify the following conditions:
■
Input Signal Out of Range—Indicates the monitor is unable to access
the appropriate input signal.
■
Going to Sleep—Indicates the screen display is entering sleep mode.
■
Check Video Cable—Indicates the video cable may not be plugged into
the computer or the computer may not be turned on.
Using Sleep Timer Mode
The Sleep Timer Mode is an energy-saving feature that powers the monitor on
and off at the same time every day. This also extends the life of the backlight
bulbs in the monitor. The Sleep Timer has five settings:
■
Set Current Time
■
Set SLEEP Time
■
Set ON Time
■
TIMER: ON/OFF
■
SLEEP NOW
To set the timer:
1. Press the Menu button on the monitor front panel to display the Main
Menu.
2. Select Management, then press the Menu button.
3. Select Sleep Timer, then press the Menu button.
4. Select Set Current Time.
NOTE: You must set the current local time before you reset the time for SLEEP Time or
ON Time.
5. Press the Menu button to enter the adjustment mode for hours (the hours
will blink).
6. Press the Minus or Plus buttons to adjust the hour.
7. Press the Menu button to enter the time for minutes (the minutes will
blink).
8. Press the Minus or Plus buttons to adjust the minutes.
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: d-ch3 Operating the Monitor Last Saved On: 8/3/99 11:30 AM
Operating the Monitor
9. Press the Menu button to lock the time chosen.
10. After setting the current time, the highlight is automatically moved to
Set SLEEP Time hours. Repeat steps 6 through 9 to set SLEEP Time.
If you do not want to set SLEEP Time, press the Menu button twice,
then select Save and Return to exit the menu.
11. After setting the SLEEP Time, the highlight is automatically moved to
Set ON Time hours. Repeat steps 6 through 9 to set ON Time.
12. Set the Timer mode to ON to activate the Sleep Timer settings.
13. When you are finished, select Save and Return to exit the menu.
The fifth selection, SLEEP NOW, turns off the monitor backlights
immediately and activates the sleep mode until the next ON Time or until the
menu button is pressed.
Adjusting Screen Quality
Allow the monitor to warm up for 20 minutes before making any adjustments.
Select Auto Adjust from the Main Menu in the OSD to automatically fine-tune
the image quality each time a new video mode is used.
Optimizing Digital Conversion
The Compaq TFT5000R Monitor contains advanced circuitry that allows the
flat panel screen to function like a standard monitor. Three controls in the
on-screen display can be adjusted to improve image performance:
■
Clock—Increase/decrease the value to minimize any vertical bars or
stripes visible on the screen background.
■
Clock Phase—Increase/decrease the value to minimize video distortion
or video jitter.
■
Clock Phase Fine—Increase/decrease the value to fine-tune or focus
the display.
IMPORTANT: The Clock must be set correctly first since the Clock Phase settings are
dependent on the main Clock setting.
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: d-ch3 Operating the Monitor Last Saved On: 8/3/99 11:30 AM
3-7
3-8
Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide
NOTE: If the monitor images become distorted when adjusting the Clock and Clock Phase
values, continue adjusting the values until the distortion disappears. To restore the factory
settings, select Confirm Reset from the Factory Reset menu in the on-screen display.
Display Resolutions
The display resolutions listed in Table 3-4 are the most commonly used modes
and are set as factory defaults. This monitor automatically recognizes these
preset modes when they are requested by a software program and provides you
with a properly sized and centered display.
Table 3-4
Display Resolutions
Preset Modes
Resolutions
1. Industry Standard
640 x 350 at 31.5 kHz/70 Hz
2. Industry Standard
640 x 480 at 31.5 kHz/60 Hz
3. VESA
640 x 480 at 37.5 kHz/75 Hz
4. VESA
640 x 480 at 43.3 kHz/85 Hz
5. Industry Standard
720 x 400 at 31.5 kHz/70 Hz
6. VESA
800 x 600 at 37.8 kHz/60 Hz
7. VESA
800 x 600 at 46.9 kHz/75 Hz
8. VESA
800 x 600 at 53.7 kHz/85 Hz
9. Macintosh
832 x 624 at 49.7 kHz/75 Hz
10. VESA
1024 x 768 at 48.4 kHz/60 Hz
11. VESA
1024 x 768 at 56.5 kHz/70 Hz
12. VESA
1024 x 768 at 60 kHz/75 Hz
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: d-ch3 Operating the Monitor Last Saved On: 8/3/99 11:30 AM
Operating the Monitor
User Modes
The video controller signal may occasionally call for a mode that is not present
if you are not using a Compaq standard graphics adapter or if you are not
using a preset mode.
If this occurs, you may need to readjust the parameters of the monitor screen
by using the on-screen display. User changes can be made to any or all of
these modes and saved in memory. The monitor automatically stores the new
setting, then recognizes the new mode just as it does a preset mode. In addition
to the 12 factory preset modes, there are four user modes that can be entered
and stored.
Energy Saver Feature
The energy saver feature has four different modes of operation:
■
Full power
■
Suspend
■
Sleep
■
Programmable Sleep
By selecting settings in the computer’s Energy Saver utility, you can
determine the length of the inactivity period before the monitor goes into sleep
or programmable sleep mode.
Table 3-5 describes the monitor’s energy saver levels available during the
different modes of operation.
Table 3-5
Energy Saver Levels
Mode
Power Usage
Description
Full Power
Less than 35 watts
ON = Normal operation. Power LED is
green.
Suspend
Less than 8 watts
Monitor screen is blanked. Backlights
are turned off. Power LED turns
yellow. There is a brief warm-up
period before returning to full power
mode.
continued
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: d-ch3 Operating the Monitor Last Saved On: 8/3/99 11:30 AM
3-9
3-10
Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide
Table 3-5
Energy Saver Levels continued
Mode
Power Usage
Description
Sleep
Less than 8 watts
Monitor screen is blanked. Backlights
are turned off. Power LED turns
amber. There is a brief warm-up
period before returning to full power
mode.
Programmable Sleep
Less than 8 watts
Monitor screen is blanked. Backlights
are turned off. Power LED blinks
amber. There is a brief warm-up
period before returning to full power
mode.
Refer to your computer manual for instructions on setting energy saver
features (sometimes referred to as power management features).
NOTE: The energy saver features for monitors work only when connected to computers
with energy saver features.
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: d-ch3 Operating the Monitor Last Saved On: 8/3/99 11:30 AM
Operating the Monitor
Care and Maintenance
This section explains how to care for and maintain your Compaq monitor
during everyday use.
Protecting the Monitor
To protect your monitor from overheating and other types of damage:
■
Use only a power source and connection appropriate for this monitor, as
indicated on the marking label/back plate.
■
If an extension cord or power strip is used, be sure that the cord or strip
is rated for the product and that the total ampere ratings of all products
plugged into the extension cord or power strip do not exceed 80 percent
of the extension cord or strip ampere ratings limit.
■
Do not overload an electrical outlet, power strip, or convenience
receptacle. The overall system load must not exceed 80 percent of the
branch circuit rating. If power strips are used, the load should not exceed
80 percent of the power strip input rating.
■
Install the monitor near an outlet that you can reach easily. Disconnect
the product by grasping the plug firmly and pulling it from the outlet.
Never disconnect it by pulling the cord.
■
Unplug the monitor from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners.
■
Slots and openings in the monitor are provided for ventilation. These
openings must not be blocked or covered. Never push objects of any
kind into these slots or openings.
■
Do not place plants on top of the monitor. Water or dirt from the plant
may fall into the vents.
■
Do not drop the monitor or place it on an unstable surface.
■
Do not allow anything to rest on the power cord. Do not walk on the
cord.
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: d-ch3 Operating the Monitor Last Saved On: 8/3/99 11:30 AM
3-11
3-12
Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide
■
Keep the monitor in a well-ventilated area, away from excessive light,
heat, and moisture. Keep the monitor away from high capacity
transformers, electric motors, and other strong magnetic fields.
■
Do not open the monitor case or attempt to service this product yourself.
Adjust only those controls that are covered by the operating instructions.
If the monitor is not operating properly or has been dropped or
damaged, contact your Compaq authorized dealer, reseller, or service
provider.
Cleaning the Monitor
To clean the monitor:
1. Turn off the monitor and the computer.
2. Dust the monitor by wiping the screen and the cabinet with a soft, clean
cloth.
If the screen requires additional cleaning, use any antistatic CRT screen
cleaner.
CAUTION: Do not use benzene, thinner, ammonia, or any volatile substance to
clean the monitor screen or cabinet. These chemicals may damage the monitor.
Never use water to clean an LCD screen.
Shipping the Monitor
Keep the original packing box in a storage area in case you need to move or
ship your monitor.
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: d-ch3 Operating the Monitor Last Saved On: 8/3/99 11:30 AM
Appendix
A
Regulatory Compliance Notices
Regulatory Compliance Identification
Numbers
For the purpose of regulatory compliance certifications and identification, your
Flat Panel Monitor Rackmount (TFT5000R) is assigned a Compaq Series
Number. The Compaq Series Number for this product is: Series PE1200. The
Flat Panel Monitor Rackmount (TFT5000R) Series Number can be found on
the product label, along with the required approval markings and information.
When requesting certification information for this product, always refer to this
Series Number. This Series Number should not be confused with the
marketing name or model number for your Flat Panel Monitor Rackmount
(TFT5000R).
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: e-appa Regulatory Compliance Notices Last Saved On: 8/3/99 1:11 PM
A-2
Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide
Federal Communications
Commission Notice
Part 15 of the Federal Communications Commission (FCC) Rules and
Regulations has established Radio Frequency (RF) emission limits to provide
an interference-free radio frequency spectrum. Many electronic devices,
including computers, generate RF energy incidental to their intended function
and are, therefore, covered by these rules. These rules place computers and
related peripheral devices into two classes, A and B, depending upon their
intended installation. Class A devices are those that may reasonably be
expected to be installed in a business or commercial environment. Class B
devices are those that may reasonably be expected to be installed in a
residential environment (personal computers). The FCC requires devices in
both classes to bear a label indicating the interference potential of the device
as well as additional operating instructions for the user.
The rating label on the device shows which class (A or B) the equipment falls
into. Class B devices have an FCC logo or FCC ID on the label. Class A
devices do not have an FCC ID on the label. Once the class of the device is
determined, refer to the following corresponding statement.
Class A Equipment
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference, in which case the user will be required to
correct the interference at personal expense.
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: e-appa Regulatory Compliance Notices Last Saved On: 8/3/99 1:11 PM
Regulatory Compliance Notices
Class B Equipment
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
■
Reorient or relocate the receiving antenna.
■
Increase the separation between the equipment and receiver.
■
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
■
Consult the dealer or an experienced radio or television technician for
help.
Declaration of Conformity for Products Marked
with the FCC logo – United States Only
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
For questions regarding your product, contact:
Compaq Computer Corporation
P. O. Box 692000, Mail Stop 530113
Houston, Texas 77269-2000
or call 1-800- 652-6672 (1-800-OK COMPAQ). For continuous quality
improvement, calls may be recorded or monitored.
For questions regarding this FCC declaration, contact:
Compaq Computer Corporation
P. O. Box 692000, Mail Stop 510101
Houston, Texas 77269-2000
or call 281-514-3333.
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: e-appa Regulatory Compliance Notices Last Saved On: 8/3/99 1:11 PM
A-3
A-4
Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide
To identify this product, refer to the Part, Series, or Model number found on
the product.
Modifications
The FCC requires the user to be notified that any changes or modifications
made to this device that are not expressly approved by Compaq Computer
Corporation may void the user’s authority to operate the equipment.
Cables
Connections to this device must be made with shielded cables with metallic
RFI/EMI connector hoods in order to maintain compliance with FCC Rules
and Regulations.
Canadian Notice (Avis Canadien)
Class A Equipment
This Class A digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du
Règlement sur le matériel brouilleur du Canada.
Class B Equipment
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du
Règlement sur le matériel brouilleur du Canada.
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: e-appa Regulatory Compliance Notices Last Saved On: 8/3/99 1:11 PM
Regulatory Compliance Notices
European Union Notice
Products with the CE Marking comply with both the EMC Directive
(89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the
Commission of the European Community.
Compliance with these directives implies conformity to the following
European Norms (in brackets are the equivalent international standards):
■
EN55022 (CISPR 22) - Electromagnetic Interference
■
EN50082-1 (IEC801-2, IEC801-3, IEC801-4) - Electromagnetic
Immunity
■
EN60950 (IEC950) - Product Safety
Japanese Notice
Taiwanese Notice
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: e-appa Regulatory Compliance Notices Last Saved On: 8/3/99 1:11 PM
A-5
A-6
Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide
German Ergonomics Notice
Compaq Computers, when tested with the Compaq PE1200 Series monitors,
were evaluated and found compliant to the requirements of ZH 1/618 (German
Safety Regulations for Display Work Places in the Office Sector) in the Text
Mode (720 x 400) using MS-DOS version 3.31 (or higher) and BASICA as
published by Compaq Computer Corporation.
EPA EnergyStar Compliance
Monitors that are marked with the EnergyStar Logo meet the requirements of
the EPA EnergyStar program. As an EnergyStar Partner, Compaq Computer
Corporation has determined that this product meets the EnergyStar guidelines
for energy efficiency. Specific details on using the Energy Saving features can
be found in the energy saver or power management section of the computer
manual.
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: e-appa Regulatory Compliance Notices Last Saved On: 8/3/99 1:11 PM
Appendix
B
Electrostatic Discharge
Precautions
To prevent damage to the system, be aware of the precautions you need to
follow when setting up the system or handling parts. A discharge of static
electricity from a finger or other conductor may damage system boards or
other static-sensitive devices. This type of damage may reduce the life
expectancy of the device.
To prevent electrostatic damage, observe the following precautions:
■
Avoid hand contact by transporting and storing products in static-safe
containers.
■
Keep electrostatic-sensitive parts in their containers until they arrive at
static-free workstations.
■
Place parts on a grounded surface before removing them from their
containers.
■
Avoid touching pins, leads, or circuitry.
■
Always be properly grounded when touching a static-sensitive
component or assembly.
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: f-appb Electrostatic Discharge Last Saved On: 8/3/99 11:31 AM
B-2
Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide
Grounding Methods
There are several methods for grounding. Use one or more of the following
methods when handling or installing electrostatic-sensitive parts:
■
Use a wrist strap connected by a ground cord to a grounded workstation
or computer chassis. Wrist straps are flexible straps with a minimum of
1 megohm ± 10 percent resistance in the ground cords. To provide
proper ground, wear the strap snug against the skin.
■
Use heel straps, toe straps, or boot straps at standing workstations. Wear
the straps on both feet when standing on conductive floors or dissipating
floor mats.
■
Use conductive field service tools.
■
Use a portable field service kit with a folding static-dissipating
work mat.
If you do not have any of the suggested equipment for proper grounding, have
a Compaq authorized reseller install the part.
NOTE: For more information on static electricity, or assistance with product installation,
contact your Compaq authorized reseller.
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: f-appb Electrostatic Discharge Last Saved On: 8/3/99 11:31 AM
Appendix
C
Power Cord Set Requirements
The power cord set meets the requirements for use in the country where you
purchased your equipment. The voltage selection switch allows you to select
the appropriate line voltage for your server.
Power cord sets for use in other countries must meet the requirements of the
country where you use the server. For more information on power cord set
requirements, contact your Compaq authorized reseller.
General Requirements
The requirements listed below are applicable to all countries:
■
The length of the power cord must be at least 6.0 feet (1.8 m) and a
maximum of 12 feet (3.7 m).
■
The power cord set must be approved by an acceptable accredited
agency responsible for evaluation in the country where the power cord
will be used.
■
The power cord set must have a minimum current capacity and nominal
voltage rating of 10 A/125 volts AC, or 10A/250 volts AC, as required
by each country’s power system.
■
The appliance coupler must meet the mechanical configuration of an
EN60320/IEC 320 Standard Sheet C13 Connector, for mating with the
appliance outlet on the computer.
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) Reference Guide Comments:
Part Number: 141559-xx1 File Name: g-appc Power Cord Set Requirements Last Saved On: 8/3/99 11:32 AM
C-2
Compaq Flat Panel Monitor Rackmount (TFT5000R) Reference Guide
Country-Specific Requirements
Use the following table to identify the appropriate accredited agency in
your country.
Table C-1
Power Cord Set Requirements - By Country
Country
Accredited Agency
Applicable Note Numbers
Australia
EANSW
1
Austria
OVE
1
Belgium
CEBC
1
Canada
CSA
2
Denmark
DEMKO
1
Finland
SETI
1
France
UTE
1
Germany
VDE
1
Italy
IMQ
1
Japan
JIS
3
Norway
NEMKO
1
Sweden
SEMKO
1
Switzerland
SEV
1
United Kingdom
BSI
1
United States
UL
2
Notes:
1.
2.
3.
Flexible cord must be <HAR> Type HO5VV-F, 3-conductor, 1.0 mm2 conductor size. Power
cord set fittings (appliance coupler and wall plug) must bear the certification mark of the
agency responsible for evaluation in the country where it will be used.
Flexible cord must be Type SVT or equivalent, No. 18 AWG, 3-conductor. Wall plug must
be a two-pole grounding type with a NEMA 5-15P (15A, 125V).
Appliance coupler, flexible cord, and wall plug must bear a "T" mark and registration
number in accordance with the Japanese Dentori Law. Flexible cord must be Type VCT or
VCTF, 3-conductor, 1.0 mm2 conductor size. Wall plug must be a two-pole grounding type
with a Japanese Industrial Standard C8303 (7A, 125V) configuration.
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) Reference Guide Comments:
Part Number: 141559-xx1 File Name: g-appc Power Cord Set Requirements Last Saved On: 8/3/99 11:32 AM
Index
A
C
AC adapter
attaching power cord 2-4
attaching to the power supply
tray 2-15
adjustments
picture quality 3-7
settings 3-5
advanced menu
selecting 3-5
settings 3-2
auto adjust 3-2, 3-7
cable management arm
attaching to the rear or the
rack 2-7
attaching to the retractable
tray 2-6
routing cables 2-7
cables
FCC compliance
statement A-4
cage nuts
inserting 2-2
Canadian Notice (Avis
Canadien) A-4
care and maintenance 3-11
cautions
be sure monitor remains
stable 2-11
cleaning liquids to avoid 3-12
preventing damage to monitor
signal cable 2-17
protecting the monitor 3-11
screws must be in place before
moving monitor 2-13
use easily accessible power
outlet 2-17
use proper AC adapter 2-17
CE Marking A-5
cleaning the monitor 3-12
clock 3-2, 3-7
B
bracket
fixed mounting,
attaching 2-13
latch, attaching 2-3
rail mounting, attaching 2-2
stabilizing, attaching 2-16
brightness 3-2
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: i-index Last Saved On: 8/3/99 1:14 PM
2
Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide
clock phase 3-2, 3-7
clock phase fine 3-2, 3-7
color codes, power LED 3-4
color display values D-2
color, adjusting 3-2
Compaq authorized reseller xi
Compaq Series Number A-1
connector pin assignments D-3
contrast 3-2
G
German Ergonomics notice A-6
getting help x
graphics driver 1-2
grounding methods B-2
H
help
D
Declaration of Conformity A-3
digital conversion 3-2
dimensions D-1
display resolutions 3-8
dot pitch D-2
E
energy saver
feature 3-9
levels 3-9
EPA EnergyStar compliance A-6
European Union Notice A-5
F
faceplate, attaching 2-15
factory reset 3-3
FCC Class A compliance
notice A-2
FCC Class B compliance
notice A-3
features, monitor 1-1
Federal Communications
Commission (FCC) notice A-2
fixed mounting bracket
attaching to the monitor 2-13
installing 2-11
focus 3-7
frequency, horizontal and
veritcal D-2
front control panel 3-4
additional sources x
Compaq authorized resellers,
telephone numbers xi
Compaq website xi
technical support telephone
numbers x
horizontal frequency D-2
horizontal position 3-2
humidity D-2
I
icons, symbols on equipment viii
illustrations
accessing the monitor 2-8
attaching the cable
management arm to the rear
of the rack 2-7
attaching the cable
management arm to the
retractable tray 2-6
attaching the cables to the cable
management arm 2-7
attaching the faceplate 2-15
attaching the fixed mounted
monitor to the rack 2-14
attaching the fixed mounting
bracket 2-13
attaching the latch bracket 2-3
attaching the mounting bracket
to the front of the rack 2-3
attaching the retma rail
covers 2-5
attaching the stabilizing
bracket 2-16
front control panel 3-4
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: i-index Last Saved On: 8/3/99 1:14 PM
Index
inserting the cage nuts and
attaching the rail mounting
brackets 2-2
inserting the monitor case
screws 2-13
inserting the retractable tray
into the rack 2-5
measuring with the 2U
template 2-2
measuring with the 8U
template 2-11
placing the AC adapter onto the
power supply tray 2-15
placing the power supply
tray 2-14
removing the monitor from the
tray 2-12
removing the plastic
frame 2-12
removing the retractable tray
from the rack 2-10
removing the tray cover 2-4
setting the monitor viewing
angle 2-9
using the retractable tray 2-8
image
retention 2-17
size D-1
modifications, FCC compliance
statement A-4
monitor
accessing 2-8
ajusting picture quality 3-7
features 1-1
fine-tuning 3-7
removing from rack 2-10
removing from the tray 2-12
removing the plastic
frame 2-12
resolution 1-1
setting the viewing angle 2-9
settings, adjusting 3-5
signal cable, connecting 2-17
storing 2-8
viewable area 1-1
mounting bracket
attaching to the front of the
rack 2-3
O
on time, setting 3-7
On-Screen Display (OSD)
available languages 1-2
main menu, launching 3-5
settings 3-1
L
P
languages
availability for OSD 1-2
selecting 3-2
latch bracket, attaching 2-3
plus button 3-4
power cord
attaching to AC adapter 2-4
attaching to electrical
outlet 2-17
set requirements C-1
power LED, color codes 3-4
power saver 3-3
power supply tray, attaching 2-14
power switch, location 3-4
programmable sleep mode 3-10
M
main menu
displaying 3-5
settings 3-1
menu button 3-4
menu item, selecting 3-5
minus button 3-4
mode display 3-3
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: i-index Last Saved On: 8/3/99 1:14 PM
3
4
Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide
R
T
rail mounting brackets,
inserting 2-2
regulatory compliance
identification number A-1
reset, factory 3-3
resolution 1-1, 3-8
retma rail covers, attaching 2-5
retractable tray
inserting into the rack 2-5
installing 2-1
RJ-45 receptacle viii
telephone numbers xi
temperature
operating D-2
storage D-2
template
measuring with the 2U 2-2
measuring with the 8U 2-11
using 2-1
text conventions vii
text mode resolution D-2
tray cover, removing 2-4
troubleshooting
minimize vertical bars or
stripes 3-7
minimize video distortion 3-7
minimize video jitter 3-7
OSD messages 3-6
S
screen saver, activate 2-17
serial number 3-3
series number A-1
shipping the monitor 3-12
sleep mode 3-9, 3-10
sleep now, function 3-7
sleep time, setting 3-7
sleep timer
menu item 3-3
mode 3-6
setting 3-6
settings, activating 3-7
specifications D-1
stabilizing bracket, attaching 2-16
stripes, minimizing 3-7
suspend mode 3-9
symbols
in text viii
on equipment viii
U
Universal Driver Manager
(UDM) 1-2
user modes 3-9
V
vertical bars, minimizing 3-7
vertical frequency D-2
vertical position 3-2
video distortion, minimizing 3-7
video jitter, minimizing 3-7
W
warnings
electrical shock ix
rack stability ix
reducing the risk of electric
shock 2-17
weight D-1
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: i-index Last Saved On: 8/3/99 1:14 PM
Download PDF

advertising