Compaq 900 Computer Monitor User Manual

User's Guide
Compaq S900 Color Monitor
1Intr_en.p65
1
9/23/98, 2:30 PM
Notice
The information in this guide is subject to change without notice.
COMPAQ COMPUTER CORPORATION SHALL NOT BE LIABLE FOR
TECHNICAL OR EDITORIAL ERRORS OR OMISSIONS CONTAINED
HEREIN; NOR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE FURNISHING, PERFORMANCE, OR USE OF
THIS MATERIAL.
This guide contains information protected by copyright. No part of this
guide may be photocopied or reproduced in any form without prior written
consent from Compaq Computer Corporation.
1998 Compaq Computer Corporation.
All rights reserved. Printed in Taiwan.
Compaq and Deskpro are registered in the U. S. Patent and Trademark
Office.
Microsoft, MS-DOS, Windows, Windows NT, and other names of Microsoft
products referenced herein are trademarks or registered trademarks of
Microsoft Corporation.
ENERGY STAR is a U.S. registered mark.
Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.
The software described in this guide is furnished under a license agreement
or nondisclosure agreement. The software may be used or copied only in
accordance with the terms of the agreement.
User’s Guide
Compaq S900 Color Monitor
Second Edition (September 1998)
Part Number 360564-002
Compaq Computer Corporation
1Not_en.p65
1
9/1/98, 1:43 PM
English8188
SAFETY INSTRUCTIONS .................................................................................. 2
INTRODUCTION ................................................................................................ 4
Package Contents ................................................................................. 5
Installing or Removing the Tilt/Swivel Base ....................................... 5
Feature Highlights ................................................................................. 6
Maximum Compatibility ................................................................. 6
Latest Screen Technology .............................................................. 6
Ergonomics Information ................................................................. 6
Instant Power Saving Solution ....................................................... 6
Recommended Use of the Monitor ....................................................... 7
Master Power Reset Switch .................................................................. 7
CONTROLS AND ADJUSTMENTS ..................................................................... 8
Front User Controls. .............................................................................. 8
(1) Menu Key .......................................................................................... 9
(2) Contrast/Brightness ...................................................................... 10
Energy Declaration .............................................................................. 11
TROUBLESHOOTING ....................................................................................... 12
TECHNICAL INFORMATION ............................................................................ 13
Specifications ...................................................................................... 13
Compatibility ....................................................................................... 14
Pin Assignment ............................................................................. 14
Appendix
Agency Regulatory Notices ................................................................... 15
English - 1
♦♦♦
English
ENGLISH - TABLE OF CONTENTS
English
SAFETY INSTRUCTIONS
1.
Carefully read all of the instructions below and keep the manual for later use.
2.
Please install the swivel base onto this product before using it.
3.
The voltage ratings and the rated frequency are on the overlay centered at
rear side of this product. Do not connect with any source of other voltage or
frequency and please follow all warnings and instructions marked on the
product.
4.
Unplug this product from the wall outlet before cleaning and use a damp cloth
to clean it. Do not use liquid cleaners or aerosol cleaners.
5.
Do not expose this product to rain or moisture.
6.
Do not place this product on an unstable cart, stand, or table. The product may
fall, causing serious damage to the product.
7.
Do not block or cover ventilating openings with cloth or other material.
Neither should this product be placed near or over a radiator or a heat register,
nor should the product be placed in a built-in installation unless proper
ventilation is provided.
8.
This product is equipped with a 3-wire grounding type plug. This plug will only
fit into a grounding-type power outlet. This is a safety feature. If you are
unable to insert the plug into the outlet, contact your electrician to replace
your obsolete outlet. Do not defeat the safety purpose of the grounding-type
plug. Choose a Tandem Blade attachment plug configuration power cord for
230V AC input.
Due to the safety requirements of different areas, please select a suitable
power cord according to the following rules, in addition to the electric rating:
A.
Northern America area: Please select a UL listed and CSA certified
power cord.
B.
Germany: Please select a VDE certified power cord.
C.
Nordic countries: Please select a power cord certified by SEMKO,
NEMKO, DEMKO, or FIMKO.
D.
The other areas: Please select a power cord suitable to the local power
system and power outlet.
2 - English
♦♦♦
English8388
Usually a suitable power cord is provided by the manufacturer when this product is
sold. However, this product is sometimes resold or transported to another area with
a different power system and safety requirements; please pay attention to the
selection of a suitable power cord.
The plug on the power cord is intended to serve as the disconnect device;
therefore, the socket-outlet should be installed near the equipment and should be
easily accessible.
9.
Do not allow anything to rest on the power cord. Do not locate this product
where people can walk on the cord.
10. Never push objects of any kind into this product through cabinet slots as they
may touch dangerous voltage points or short out parts that could result in a
risk of fire or electric shock. Never spill liquid of any kind on the product.
11. Do not attempt to service this product yourself, as opening or removing covers
may expose you to dangerous voltage points or other risk. Refer all servicing
to your Compaq authorized service personnel.
12. Unplug this product from the wall outlet and refer servicing to Compaq
authorized service personnel under the following conditions.
A.
When the power cord or plug is damaged or frayed.
B.
If liquid has been spilled into the product.
C.
If the product has been exposed to rain or water.
D.
If the product does not operate normally when operating instructions are
followed, adjust only those controls that are covered by the operating
instructions since improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician
to restore the product to normal operation.
E.
If the product has been dropped or the cabinet has been damaged.
F.
If the product exhibits a distinct change in performance, indicating a
need for service.
English - 3
♦♦♦
English
SAFETY INSTRUCTIONS
English
INTRODUCTION
Introduction
The monitor is a multiple frequency high-resolution color monitor for PC-compatible
or Macintosh family and workstation systems. The monitor is equipped with
microprocessor-based intelligence and multiple frequency scanning capability,
allowing it to provide maximum compatibility for various system platforms.
The monitor uses the latest screen technology including a 0.22 mm horizontal dot
pitch, High Contrast CRT to display crisp text and vivid color graphics with a
maximum resolution up to 1600 x 1200 pixels. Furthermore, it supports VESA 85Hz
modes to provide a flicker-free display. The full-function digital control and OnScreen Display (OSD) system provide easy adjustment of image geometry and color
settings for different display modes with the precision of a fixed frequency monitor.
The design of the monitor is also ergonomically concerned. In addition to the
friendly controls and user comfort features, the emission level of the electric and
magnetic fields is kept low to meet the Swedish MPR II standards or TCO 95
(optional).
The monitor is also equipped with energy saving functions. It is compatible with the
VESA power saving standards. The lowest power consumption is less than 8 Watts.
4 - English
♦♦♦
English8588
Package Contents
The following lists all of the items included in the monitor package box. Please
save the original box and packing materials for future transportation or shipment of
the monitor.
Front View
User's Manual
Rear View
USER
'S MAN
UAL
COMP
AQ S
90
MONIT 0
OR
Power Cord
Installing or Removing the Tilt/Swivel Base
1.
Turn off the system and all attached peripherals.
2.
Carefully set the monitor upside down.
Installing the Tilt/Swivel Base:
1.
Align the base with the slots on the bottom of the
monitor and insert the tilt/swivel base into the slots.
2.
Push the tilt/swivel base firmly toward the front of the
monitor until the latches click into the locked position.
Removing the Tilt/Swivel Base:
1.
Squeeze and hold the latches.
2.
Pull the tilt/swivel base to the rear of the monitor and
lift to remove the base.
.
English - 5
♦♦♦
English
INTRODUCTION
English
INTRODUCTION
Feature Highlights
Maximum Compatibility
• Automatically scans all horizontal frequencies between 30 kHz and 95 kHz,
and all vertical frequencies between 50 Hz and 160 Hz.
• Supports multiple operating platforms such as PC-compatible or Macintosh
computers (with optional adapter).
• Multiple graphic standards with high refresh rates:
640 x 480/85 Hz, 800 x 600/85 Hz, 1024 x 768/85 Hz, 1280 x
1024/85 Hz, 1600 x 1200/75 Hz.
• Supports wide range of graphics standards including VGA, Super VGA, 8514/
A, XGA, Mac II 13" (640 x 480), Mac 16" (832 x 624), Mac 21" (1152 x 870),
as well as all VESA standards.
Latest Screen Technology
• Horizontal dot pitch of 0.22 mm High Contrast 19" CRT (48.2 cm) for
maximum clarity and detailed pictures.
• Special antireflection, antiglare and antistatic coating of the screen face
provides better focus, contrast and color performance.
• Flat and square screen reduces image distortion and glare.
• Full-feature digital control and multilingual OSD system allows easy
adjustment of geometry and color. Furthermore, the monitor provides even
advanced adjustments like trapezoid, parallelogram, side-pin, pin-balance,
moire and rotation that allow the user to fine-tune the screen image.
Ergonomics Information
• Electric and magnetic field emissions are kept low to meet the Swedish
MPR II standard or TCO 95.
• Front user controls allow easy access and comfort to adjust the screen
image to your personal preferences.
• Horizontal and vertical full-scan capabilities allow you to use the entire
screen area in most resolutions.
• A tilt/swivel base for horizontal and vertical adjustments always provides
the optimum viewing angle.
Instant Power Saving Solution
• The monitor is compatible with VESA DPMS (Display Power Management
Signaling) standard which provides four power saving modes by detecting
horizontal and vertical sync signals.
• The monitor consumes 65 W to 130 W depending on the screen contents in
normal operation; when a power saving mode is activated, it consumes less
than 15 W in Standby mode, less than 15 W in the Suspend mode and less
than 8 W in the Off mode.
6 - English
♦♦♦
English8788
Recommended Use of the Monitor
When setting up and using the monitor, pay special attention to the following for
optimum performance:
• Do not use your monitor against a bright background or where sunlight or
other light sources will shine directly on the screen.
• The monitor should be placed just below eye level (10°-15°) for optimum
viewing.
• Set the monitor's brightness to match the ambient room light.
• For optimum focus, the contrast control should not be set to the maximum
level unless the input signal level is extremely low. Also, the brightness
control should be set to a point where the overall background area just
begins to disappear.
• Allow adequate ventilation around the monitor so that the heat from the
monitor can properly dissipate.
• Neither the monitor itself, nor any other heavy objects, should rest on the
power cord. Damage to the power cord can cause fire or electrical shock.
• Keep the monitor away from high-capacity transformers, electrical motors,
or other strong magnetic fields.
• Your monitor should not be used in damp, dusty, or dirty areas.
• Handle your monitor with care when transporting it.
Master Power Reset Switch
The black Master Power Reset switch on the left side of the back of the monitor is
installed for technician use when the monitor is being serviced. Be sure this switch
is turned on after you first install the monitor. Always leave this Power Reset switch
in the ON position. Do not use this switch to power on and power off the monitor.
Use the power switch on the front panel to power on and power off the monitor.
CAUTION
!
Do not scratch or bump the surface of the CRT with a pen, a
screwdriver, etc.
• Clean the CRT surface with a lint-free, nonabrasive, soft cloth,
and do not use a solution or glass cleaner that contains abrasives, alcohol, or an alkaline solution such as ammonia.
•
English - 7
♦♦♦
English
INTRODUCTION
English
CONTROLS AND ADJUSTMENTS
Controls and Adjustments
Once you have installed the monitor for your system, please read the instructions in
this section which give you some guidelines on how to use the monitor more
efficiently. It leads you through the various functions of the user controls and
explains how to adjust the monitor to your personal preference.
Front User Controls
1
2
3
4
5
1.
MENU KEY
Displays and selects the "Status," "Position," "Size," "Geometry," "Moire,"
"Color," and "Language" functions.
2.
CONTROL KEYS
•Adjusts the parameter of the selected function.
•Adjusts the contrast or brightness level of the screen.
3.
EXIT/DEGAUSS SWITCH
Exits OSD window or manually degausses the monitor.
4.
POWER LED INDICATOR
As long as the monitor is powered, this indicator is lit. In normal operation, it
lights green. While in power saving mode, the indicator will turn to amber.
5.
POWER SWITCH
Turns the monitor On and Off.
Power Save Note: This monitor is equipped with automatic powersaving circuitry design that will work with any computer following the
VESA DPMS detection format, and it meets ENERGY STAR low power
state definition. When the monitor is first powered on, the power save
function remains inactive; the power save function is triggered when the
input signal is cut off by the computer or there is a loss of signal input.
8 - English
♦♦♦
English8988
English
CONTROLS AND ADJUSTMENTS
(1) Press the "MENU" key to open the On-Screen menu function. Seven adjustment
functions will appear on the On-Screen menu.
Press the "MENU" key to scroll selections from top-down sequence.
Press "+," "–," " ," or " " to activate the preferred adjustments.
Status
Position
Size
Geometry
Moire
Color
Language
A . STATUS:
Status
Position
640
x
480
Size
H:
31.5
Geometry
V:
60.3
KHz
Hz
Moire
Color
:Recall
Language
1. To display existing timing data of resolution and frequency.
2. To recall the factory settings of position,size and geometry.
• Press the "+" key to select "Recall."
• Press the "+" key to execute or press the "–"key to cancel the
instruction.
B. P O S I T I O N :
1. Press the "+" or "–" key to reposition the display to the right or
left.
2. Press the " " key to move the entire picture upwards and
" " to move it downwards.
Status
Position
Size
Geometry
Moire
Color
Language
C . SIZE:
1. Press the "+" or "–" key to enlarge or reduce the horizontal
width.
2. Press the " " key to enlarge the vertical size or " " to reduce
it.
Status
Position
Size
Geometry
Moire
Color
Language
D . GEOMETRY:
Status
Position
50
50
50
Size
Geometry
Moire
50
50
Color
Language
Sidepin
1. Press the " " or " " key to select Sidepin, Balance, Keystone,
Parallel or Rotate.
2. Press the "+" or "–" key to adjust the picture according to your
preferences.
E. MOIRE:
Status
Position
Size
H. Moire
V. Moire
Geometry
Moire
:Proceed
Color
1. Press the " " or " " key to select the H.Moire or V. Moire.
2. Press the "+" key to proceed.
3. Press the "+" or "–" key for preferred picture.
Language
H. Moire
V. Moire
50
English - 9
♦♦♦
English
CONTROLS AND ADJUSTMENTS
F. C O L O R :
Status
Position
1
Size
60
70
60
2
3
4
Geometry
Moire
Color
9300°K
Language
1. By pressing the " " key, you can select modes 1, 2, 3, or 4.
The settings of modes 1,2 and 3 are fixed. Only mode 4 can be
adjusted by the user.
2. To adjust the settings of mode 4, press the " " key to select of
R/G/B gain contrast and the " + " key to increase or " – " to
decrease its density.
G . LANGUAGE:
Status
Position
English
Size
Deutsch
Français
Geometry
Moire
Press the " " or " " key to select between English, German,
French, Spanish, or Italian language for the OSD menu.
Español
Itallano
Color
Language
H . CONTRAST/BRIGHTNESS;
:50
:100
When the OSD menu is switched off, proceed as follows to adjust the contrast or brightness:
a. Press the ' ' or ' ' key to increase or decrease the brightness level.
b. Press '+' or '–' key to increase or decrease the contrast level of the screen.
*
*
All adjustments except the color adjustment will be automatically saved.
The menu block will disappear after 20 seconds without any data changing or press the
"exit" key directly.
10 - English
♦♦♦
English81188
Energy Declaration
This monitor is equipped with a function for saving energy which supports the VESA
Display Power Management Signaling (DPMS) standard. This means that the monitor must
be connected to a computer which also supports the VESA DPMS standard to fulfill the
requirements of the NUTEK specification 803299/94. The time settings for switching to a
power saving mode are adjusted from the system unit by software. From the first
indication of inactivity to power saving position A2, the total time must not be set to more
than 70 minutes.
1. VESA Power-Management Proposal
2. Power Consumption (120/230 Vac)
VESA D PM S Standard
N UTEK
H .sync
V.sync
Video
State
O ff
On
Blank
Stand-by
On
O ff
Blank
Suspend
O ff
O ff
Blank
O ff
VESA state LED indicator Pow erConsum ption
Norm aloperation
On
Green
< 130W
PowerSaving
Position A1
Suspend
Am ber
< 15W
PowerSaving
Position A2
O ff
Am ber
< 8W
According to TCO guidelines, the optimum TCO readings are measured when brightness
and contrast are adjusted to their center position.
English - 11
♦♦♦
English
CONTROLS AND ADJUSTMENTS
English
TROUBLESHOOTING
Troubleshooting
Before calling the Compaq authorized service center, please check that the items below
are properly connected or set.
In case of using a nonstandard signal, please check the pin assignments and the signal
timing of your adapter with the specifications in the section "Pin Assignment Table."
1. Screen is blank:
• Check to see if the monitor is turned on.
• Check to see if the signal cable and power cable are both connected properly.
• The monitor may be in an energy saving sleep mode or you may have a screen
blanking utility installed. Press any key on the keyboard or type your password.
• Check to see if the horizontal/vertical frequency is out of range.
• Adjust the Brightness and Contrast controls in the OSD.
2. "No Signal Input" is displayed on the screen:
• Check to see if the video card is seated correctly in its slot.
• Check to see if the computer is turned on.
• Check to see if the signal cable is connected to the video card in the computer.
3. Display image is not centered, or is too small or too large:
• Adjust the Position and Size controls in the OSD.
4. Scrolling or unstable image:
• Check to see if the signal cable is attached to the computer.
• Check the pin assignments and signal timings of the monitor and video card.
5. Picture is fuzzy:
• Adjust the Brightness and Contrast controls in the OSD.
• Push the Degauss button once.
CAUTION: Do not press the Degauss button more than once every 20 minutes when
not switching between modes. Do not hold the button down continuously.
6. Picture bounces or wave patterns are present on the screen:
• Relocate electrical devices that may be causing electrical interference.
• See the FCC information in the front of this manual.
7. Display edges are curved inward or outward:
• Adjust the Pincushion control.
8. Colors are blotchy:
• Press the Degauss button once.
9. No Plug & Play functionality:
• Check to see if the host system is Plug & Play compatible.
• Check to see if the VGA card is DDC1/DDC2B compatible.
• Check to see if Microsoft Windows 95 is installed and the software key for DDC
function is enabled.
• Check to see if the manufacturer's original detachable signal cable is being used.
12 - English
♦♦♦
Color Picture Tube
English81388
Specifications
48.2 cm / 19" (18" viewable screen size) diagonal
measurement, 90 degree deflection, High Contrast CRT,
antiglare, antireflection, antistatic, medium short persistence
phosphor, dark bulb
Horizontal Dot Pitch
0.22 mm, High Contrast
Input Signal
Video:
Sync:
0.7 Vp-p/75 ohm, analog positive
Separate Sync.:
TTL Level
Horizontal Sync.:
positive/negative
Vertical Sync.:
positive/negative
Composite Sync.:
TTL Level,
positive/negative
Scan Frequency
Horizontal: 30 to 95 kHz automatically
Vertical: 50 to 160 Hz automatically
Display Area
Horizontal 350 mm (adjustable)
Vertical 260 mm (adjustable)
Max. Resolution
1600 x 1200 pixel, noninterlaced
Display Colors
Analog input, unlimited colors
Video Bandwidth
150 MHz
Misconvergence
Center 0.3 mm, Corner 0.4 mm maximum
Plug & Play
DDC 1 / DDC 2B
Power Supply
100-120 VAC/200-240 VAC, 50/60 Hz (automatically)
Power Consumption
130W max.
Dimensions
18.1(W) × 18.2(H) × 18.5(D) inches
460(W) × 461(H) × 469(D) mm
Weight
57 lbs (26 kgs)G.W., 48.4 lbs (22kgs)N.W.
Environment
Operating Temperature:
0°C to 40°C
Consideration
Humidity 20% to 80%
Storage Temperature:
–20°C to 60°C
Humidity 10% to 90%
Note: Specifications are subject to change without notice.
English - 13
♦♦♦
English
TECHNICAL INFORMATION
English
TECHNICAL INFORMATION
Compatibility
This color monitor supports multiple operating platforms such as PC-compatible
and Macintosh family computers. This section provides you with detailed
information on pin assignment of the D-Sub connector and the preset timing chart
of the prevailing video standards.
Pin Assignment
1
6
11
5
10
15
Male Mini D-15 Connector
Signal
Red Video
1
Green Video
2
Blue Video
3
Horizontal Sync
13
Vertical Sync
14
Ground
14 - English
♦♦♦
15 Pin Mini D-Sub
4,5,6,7,8,10,11
No Connection
9
SDA (DDC)
12
SCL (DDC)
15
appendix
Agency Regulatory Notices
Federal Communications Commission Notice
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
n Reorient or relocate the receiving antenna.
n Increase the separation between the equipment and
the receiver.
n Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
n Consult the dealer or an experienced radio or television technician for help.
Modifications
The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Compaq
Computer Corporation may void the user’s authority to operate the
equipment.
Cables
Connections to this device must be made with shielded cables with
metallic RFI/EMI connector hoods to maintain compliance with FCC
Rules and Regulations,
English - 15
♦♦♦
1Pref_en.p65
15
9/23/98, 2:31 PM
Declaration of Conformity for products
marked with the FCC logo - United States only
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
For questions regarding your product, contact:
Compaq Computer Corporation
P. O. Box 692000, Mail Stop 530113
Houston, Texas 77269-2000
Or, call 1-800-652-6672 (1-800-OK COMPAQ)
For questions regarding this FCC declaration, contact:
Compaq Computer Corporation
P. O. Box 692000, Mail Stop 510101
Houston, Texas 77269-2000
Or, call (281) 514-3333
To identify this product, refer to the Part, Series, or Model number
found on the product.
Canadian Notice
This Class B digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
Avis Canadien
Cet appareil numérique de la classe B respecte toutes les exigences du
Règlement sur le matériel brouilleur du Canada.
German Ergonomics Notice
Compaq Computers, when tested with the Compaq PE1131 Series
monitors, were evaluated and found compliant to the requirements of
ZH 1/618 (German Safety Regulations for Display Work Places in the
Office Sector).
16 - English
♦♦♦
1Pref_en.p65
16
9/23/98, 2:31 PM
EPA ENERGY STAR Compliance
Monitors that are marked with the ENERGY STAR Logo meet the requirements of the EPA ENERGY STAR program. As an ENERGY STAR
Partner, Compaq Computer Corporation has determined that this
product meets the ENERGY STAR guidelines for energy efficiency.
Specific details on using the Energy Saving features can be found in
the energy saver or power management section of the computer
manual.
European Notice
Products with the CE Marking comply with both the EMC Directive
(89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by
the Commission of the European Community.
Compliance with these directives implies conformity to the following
European norms:
n EN55022 (CISPR 22) - Radio Frequency
Interference
n EN50082-1 (IEC801-2, IEC801-3, IEC801-4) - Electromagnetic Immunity
n EN60950 (IEC950) - Product Safety
Japanese Notice
English - 17
♦♦♦
1Pref_en.p65
17
9/23/98, 2:32 PM