Contec BX-710-AC Server User Manual

Ver.1.01
Fanless, Ultra Low Voltage Celeron M 1.06GHz
BOX-PC 710 series
* Specifications, color and design of the products are subject to
change without notice.
Model
Expansion Slot
OS
(storage device)
-
BX-710-AC5000
BX-710P2-AC5000
PCI slot x 2
BX-710P4-AC5000
PCI/ISA slot x 4
-
This product is an industrial personal computer (box computer®)
that has a Ultra Low Voltage version of Celeron M Processor
1.06GHz that enables completely natural-air-cooling (fanless)
operation.
The BX-710 series has a Ultra Low Voltage version of Celeron M
Processor, a 945GME chipset, and 1GB of DDR2 SDRAM.
The BX-710P2 series has a Ultra Low Voltage version of Celeron
M Processor, a 945GME chipset, and 1GB of DDR2 SDRAM as
well as two slots of PCI buses.
The BX-710P4 series has a Ultra Low Voltage version of Celeron
M Processor, a 945GME chipset, and 1GB of DDR2 SDRAM as
well as four slots of PCI buses.
Various interfaces such as dual LAN / USB2.0 / CF card slot /
RS-232C and the slot-in 2.5 inches SATA hard disk bay unit being
installed, this product is widely usable as a platform based on the
OS for the general-purpose PC.
Embedded-type CPU and chip set have been adopted. The use
of readily available parts ensures the ease of the use of the
product. In addition, the use of CONTEC-customized BIOS
allows support to be provided at the BIOS level.
Features
Adoption of ultra-low voltage Celeron M Processor 1.06GHz,
945GME chip set, and 1GB of memory
A power-thrifty Ultra Low Voltage version Celeron M Processor
1.06GHz/FSB533MHz, an Intel® 945GME chipset, and 1GB of
memory as standard specifications. The adoption of an
embedded-type CPU and chipset enables a stable power supply.
Adoption of slot-in 2.5 inches SATA hard disk bay unit
Slot-in method is adopted allowing easy install / removal.
Fan-less operation achieved by natural air-cooling
The use of a power-saving CPU and naturally-cooled cabinet
structure allows fanless operation.
Dual LAN, USB2.0 x 6, CF card slots x 2, etc. located at the
front for easier maintenance
Extended interfaces such as 1000BASE-T x 2, USB2.0 x 6, serial
(RS-232C) x 2 are all placed at the front, providing excellent
maintenance advantages. In addition to a general-purpose
analog RGB interface, the product has an LVDS interface, which
enables dual screen display. Plus, it has two CF card slots
(Type I, bootable) that are very useful in enabling separate
handling of OS and data, allowing an operation style in which
maintenance data, system log, and/or collected data can be
taken out for further work at other locations.
Expansion slots to hold PCI bus boards (Model with
Expansion Slot).
BX-710P2-AC5 has two PCI slots.
BX-710P4-AC5 has four PCI slots.
Board size that can be attached is 240(L) x 107(H)[mm].
Safety design with an anti-disconnection mechanism and
BIOS setting retention function
Unnecessary trouble can be avoided by the use of clamps for
prevention of cable disconnection and the use of metal fittings for
prevention of CF card disconnection. Retention of CMOS data
by EEPROM allows the system to start up even when the battery
has run out. In addition, the use of a CONTEC-customized
BIOS (mfd. by Award) allows support to be provided at the BIOS
level.
Structure free from mechanical moving parts (Windows
Embedded Standard-installed model)
The use of a CF card or a SSD for the storage device has
eliminated any moving parts, improving the levels of the
environment resistance (ambient temperature, impact, vibration),
reliability and quietness. It is possible to use the EWF function
of OS. It is designed for safety required for embedding purpose,
for example, prohibiting unwanted writing to the CF card or the
SSD with EWF function will relieve the concern about the writing
limits to the CF card or the SSD and prevent an unintentional
system alteration.
* EWF (Enhanced Write Filter) is a function specific to Windows Embedded Standard that
protects the disk from being actually written by redirecting the writing to RAM.
Installation-compatible with conventional products in the
IPC-BX 900/701/700/630/620/600 series
For the installation-compatible with conventional products in the
IPC-BX 900/701/700/630/620/600 series, it is easy to migrate
from the existing system.
Supported OS
Windows XP Professional
Windows Embedded Standard 2009
BX-710-AC, BX710P2-AC, BX710P4-AC
1
Ver.1.01
Features
Functional Specifications
Model
BX-710-AC5
BX-710P2-AC5
CPU
Ultra Low Voltage Intel® Celeron® M Processor 1.06GHz (FSB533MHz)
Chip set
Intel® 945GME + ICH7M-DH
BIOS
BIOS (mfd. by Award)
Memory
1GB, 200pin SO-DIMM socket, PC2-4300 (DDR2 533) DDR2 SDRAM support
BX-710P4-AC5
Graphic
Controller
Built in Intel 945GME
Video RAM
Main memory shared
Video BIOS
64KB(C0000H-CFFFFH)
System
resolution
Analog RGB
LVDS
Audio
640 x 480, 800 x 600, 1,024 x 768, 1,152 x 864, 1,280 x 600, 1,280 x 720, 1,280 x 768, 1,280 x 960, 1,280 x 1,024, 1,360 x 768,
1,400 x 1,050, 1,600 x 900, 1,600 x 1,200, 1,856 x 1,392, 1,920 x 1,080, 1,920 x 1,200, 1,920 x 1,400, 2,048 x 1,536 (16,770,000
colors)
640 x 480, 800 x 600, 1,024 x 768 (26,000,000 colors)
AC97 compliant, LINE OUT x 1, MIC IN x 1
Storage
SATA
LAN
Serial ATA 1.0 compliant support:
1 port
Intel® 82573L Controller
1000BASE-T/100BASE-TX/10BASE-T x 2 (Wake On LAN support only A side of the main body silk.)
USB
USB 2.0-compliant 6 port
Serial I/F
RS-232C (general-purpose) : 2 port, Baud rate : 50 - 115,200bps
RS-232C (for touch panel communication) : 1 port, RS-422/485 (general-purpose): 1 port, Baud rate : 50 - 115,200bps
RAS
Watch dog timer
Remote reset
1sec - 255sec (RESET, interrupt or external output is allowed at time expiration)
External input signal
General-purpose I/O
3 opto-isolated inputs and outputs (However, one output also serves as an external WDT output and one input also serves as
remote reset. They become available when switched.)
Hardware monitoring
Monitoring CPU temperature, board temperature, power voltage
RTC/CMOS
ICH7M-DH built in. The real-time clock is accurate within
Lithium backup battery life: 10 years or more
Power Management
Power management setup via BIOS. Modem Ring On/Wake One LAN.
Supports PC98/PC99 ACPI Power management.
3 minutes (at 25 C) per month.
Interface
Display
2 port
(15pin HD-SUB connector [Analog RGB] x 1, 26 pin half pitch connector [LVDS] x 1)
Audio
LINE OUT: φ3.5 Stereo mini jack, Full-scale output level 1.5Vrms (Typ.), Dual 50mW Amplifier
MIC IN: φ3.5 Stereo mini jack, Full-scale input level 1.6Vrms (Typ.)
CF card slot
2 slots (CF1/CF2), CF CARD Type I, bootable
Windows Embedded Standard pre-install CF model : CF (2GB) is finished mounting (one partition)
HDD
2 slots , Slot-in method, 2.5 inches SATA hard disk
Windows XP Professional pre-install model : SATA HDD (80GB) is finished mounting (one partition)
Windows Embedded Standard pre-install SSD model : SATA SSD (2GB) is finished mounting (one partition)
The other model : It is not mounted.
Power supply
LAN*2
2 port (RJ-45 connector)
USB
6 port (A-TYPE connector)
RS-232C
2 port (9 pin D-SUB connector [male])
RS-422/485/
General-purpose I/O/RAS
1 port (15 pin D-SUB connector [female])
Expansion board slot
None
PCI slot x 2,
PCI slot x 4,
Usable board dimension : 240mm (Max.) Usable board dimension : 240mm (Max.)
Power supply connector
100-240VAC(50/60Hz) input automatic operation switch
Input power supply voltage
85 - 264VAC (47 - 63Hz)
Current consumption
90VA (Max.)
115VA (Max.)
Expansion board power supply
capacity
None
+12V
0.5A,
+3.3V
1A,
-5V
Not supplied
External device power supply CF card slot
capacity
: +5V
500mA *1
USB I/F
: +5V
3A (500mA×6) *1
Physical dimensions
(mm)
262(W) x 262(D) x 55(H)
(No protrusion)
130VA (Max.)
+5V 1A,
-12V 80mA,
+12V
0.5A,
+3.3V
2A,
+5V 2A,
-5V
Not supplied
-12V 80mA,
CF card slot
: +5V
500mA *1
CF card slot
+5V
500mA *1
USB I/F
: +5V
3A (500mA×6) *1
USB I/F
: +5V
3A (500mA×6) *1
Expansion board slot
Expansion board slot
(total 2 slot)
: +12V 0.5A, +5V 1A *1,
+3.3V 1A,
-12V 80mA,
-5V
Not supplied
(total 4 slot)
: +12V 0.5A,
+5V 2A *1,
+3.3V 2A,
-12V 80mA,
-5V
Not supplied
262(W) x 262(D) x 115(H)
(No protrusion)
262(W) x 262(D) x 155(H)
(No protrusion)
Weight
約 3.1kg
約 3.9kg
約 4.3kg
(At the time of the HDD(SSD)
(At the time of the HDD(SSD)
(At the time of the HDD(SSD)
uninstalling)
uninstalling)
uninstalling)
*1 The total of the external device power supply load for +5V should be 3A or lower.
* The PCI bus slot is for 32 bit specification. No operational tests are done for the 32/64 bit boards.
BX-710-AC, BX710P2-AC, BX710P4-AC
2
Ver.1.01
Installation Environment Requirements
Parameter
Requirement description
Allowable instantaneous Less than 20ms
Power supply
One minute each for AC2.0kV (input - FG) 20mA
specifications power outage
Dielectric strength
50MΩ (500VDC)
Operating temperature
0 - 50°C (SSD in use),
0 - 45°C (HDD in use)
Storage temperature
-10 - 60°C
Humidity
10 - 90%RH (No condensation)
Floating dust particles
Not to be excessive
Corrosive gases
Line noise
Ambient
specifications Line-noise
resistance Static
electricity
resistance
Vibration
Sweep
resistance
resistance
*1
Impact resistance *1
Grounding
*1
None
AC line/±2kV,
Signal line/±1kV (IEC61000-4-4Level 3, EN61000-4-4
Level 3)
Contact discharge/±4kV (IEC61000-4-2 Level 2,
EN61000-4-2 Level 2)
Atmospheric discharge/±8kV (IEC61000-4-2 Level 3,
EN61000-4-2 Level 3)
10 - 57Hz/semi-amplitude 0.15mm 57 - 150Hz/2.0G
40 min. each in x, y, and z directions
(JIS C60068-2-6-compliant, IEC60068-2-6-compliant)
10G, half-sine shock for 11 ms in x, y, and z directions
(JIS C60068-2-27-compliant, IEC60068-2-27-compliant)
Class D grounding (previous class 3 grounding)
When the HDD is not in use.
List of Options
CF Card
CF-1GB-B
CF-2GB-B
CF-4GB-B
CF-8GB-B
CF-1GB-A
CF-2GB-A
CF-4GB-A
CF-8GB-A
1GB CompactFlash for Fix Disk
2GB CompactFlash for Fix Disk
4GB CompactFlash for Fix Disk
8GB CompactFlash for Fix Disk
1GB CompactFlash for Fix Disk
2GB CompactFlash for Fix Disk
4GB CompactFlash for Fix Disk
8GB CompactFlash for Fix Disk
TFT color liquid-crystal display
< Analog RGB types >
FPD-H21XT-AC
FPD-L21ST-AC
FPD-M21VT-AC
< LVDS&DVI input type >
FPD-H71XT-DC1 *1
FPD-L71ST-DC1 *1
FPD-S71VT-DC1 *1
FPD-H75XT-DC1 *1
FPD-L75ST-DC1 *1
FPD-M75VT-DC1 *1
*1
(15inch 1024 x 768 dots,
Panel mounted type)
(12.1inch 800 x 600 dots,
Panel mounted type)
(10.4inch 640 x 480 dots,
Panel mounted type)
(15inch 1024 x 768 dots,
Panel mounted type)
(12.1inch 800 x 600 dots,
Panel mounted type)
(6.4 inch 640 x 480 dots,
Panel mounted type)
(15inch 1024 x 768 dots,
Embedded type)
(12.1inch 800 x 600 dots,
Embedded type)
(10.4 inch 640 x 480 dots,
Embedded type)
Please Purchase an optional cable for connection [ FPD-26M26M-005, FPD-26M26M-020,
FPD-26M26M-050 ].
Display cable only for LVDS
FPD-26M26M-005
FPD-26M26M-020
FPD-26M26M-050
LVDS Cable (0.5m)
LVDS Cable (2m)
LVDS Cable (5m)
Touch-panel cable for an analog RGB display
IPC-CBL3-2
IPC-CBL3-5
AT host Touch panel, COM cable (2m)
AT host Touch panel, COM cable (5m)
CAUTION
Precautions when using products other than our options
- If a product other than our option is used, the normal operation may be
impaired or the functions may be limited.
Packing List
Name
BX-710-AC5xxx
Pcs.
BX-710P2-AC5xxx
Pcs.
BX-710P4-AC5xxx
Pcs.
1
1
1
BOX-PC
2
2
2
The attachment fittings
0
2
4
Slot cover
CF attachment fittings
2 *4
2 *4
2 *4
AC cable
1
1
1
Screws for attachment fittings
Three-point sems screw (M4 x
4
4
4
8)
Screws for 2.5” drive, slot
cover, CF attachment fittings
6
8
10
Three-point sems screw (M3 x
6)
AC cable clamp
1
1
1
USB/ sound cable clamp
2
2
2
1
1
1
Product guide (this sheet)
IPC Precaution List
1
1
1
1 *3
1 *3
1 *3
Royalty consent contract
1 *3
1 *3
1 *3
Setup Procedure Document
Notes on using Windows
1 *2 *3
1 *2 *3
1 *2 *3
Embedded Standard
Recovery Media*1
1 *3
1 *3
1 *3
*1 Please confirm latest information on the CONTEC homepage though the user's manual is
stored in Recovery Media. The installation method is described in this document as well as
the UsersManual. [File storing place: ¥Manual]
*2 It is not packed to the Windows XP Professional pre-install model.
*3 It is not packed to the OS uninstall model.
*4 It is attached in advance to the main body 1pcs in CF install model.
Component Life
(1) Battery
--- The internal calendar clock and CMOS
RAM are backed by a Lithium primary
battery. The backup time at a temperature
of 25°C with the power disconnected is 10
years or more.
--- The OS-installed model with Windows XP
Profettional uses a HDD for the OS storage
area. Estimated service life: 5 years or
15,000 power on hours, whichever comes
first.
--- The OS-installed model with Windows
Embedded Standard 2009 uses a CF card or
a SSD for the OS storage area. Estimated
failure rates: 100,000 rewrite cycles,
500,000 hours MTBF
(2) HDD
(3) CF, SSD
*
Replacement of expendables is handled as a repair (there will be a charge).
Difference from IPC-BX700 series
The difference point with the IPC-BX700 series is shown in the
following.
IPC-BX700 series
IPC-BX701 series
BX-710 series
Ultra Low Voltage Intel®
Celeron® M Processor
1.0GHz(FSB400MHz)
Intel® 855GME
Ultra Low Voltage Intel®
Celeron® M Processor
1.0GHz(FSB400MHz)
Intel® 855GME
Memory
512MB
1GB
Ultra Low Voltage Intel®
Celeron® M Processor
1.06GHz(FSB533MHz)
Intel® 945GME +
ICH7M-DH
1GB
System
resolution
(Max.)
LVDS I/F
1,600 x 1,200 (16,770,000 1,600 x 1,200 (16,770,000 2,048 x 1,536 (16,770,000
colors)
colors)
colors)
LAN
100BASE-TX/10BASE-T 1000BASE-T x 1,
1000BASE-T × 2
x1
100BASE-TX/10BASE-T
x1
2.5 inch IDE HDD or
2.5 inch IDE HDD or
2.5 inch SATA HDD
silicon disk drive
silicon disk drive
1
1
None
CPU
Chip set
Storage
PS/2 I/F
None
LVDS I/F x 1
LVDS I/F x 1
Terminal block for connecting the RAS connector
IPC-PSD-20
Terminal block for connecting the RAS
connector
BX-710-AC, BX710P2-AC, BX710P4-AC
3
Ver.1.01
Physical Dimensions
BX-710-AC5
Component Name
BX-710-AC5
BX-710P2-AC5
BX-710P4-AC5
BX-710P2-AC5
Name
POWER SW
BX-710P4-AC5
AC INLET
AC power input connector
SW1
CMOS, RTC clear SW
SW2
General-purpose SW
POWER LED
Power ON display LED
ACCESS LED
STATUS LED
IDE disk access display LED
Status LED
RESET
Hardware reset switch
LINE OUT
Line out (f3.5 PHONE JACK)
MIC
Mike in (f3.5 PHONE JACK)
S-ATA
HDD slot (Serial-ATA)
CF1
CF card slot (IDE connection mastering)
CF2
CF card slot (IDE connection slaving)
LAN A
Ethernet 1000BASE-TX/100BASE-T/10BASE-T RJ-45 connector
LAN B
Ethernet 1000BASE-TX/100BASE-T/10BASE-T RJ-45 connector
USB
USB port connector x 6
SERIAL A
Serial port A connector (9pin D-SUB/male)
SERIAL B
RAS
Serial port B connector (9pin D-SUB/male)
RAS function and RS-485 connector (15pin D-SUB/female )
A-RGB
Display (15pin D-SUB/female)
LVDS
LVDS (26pin half pitch connector)
PCI x 2 < P2 model >, PCI x 4 < P4 model >
Expansion Slot
BX-710-AC, BX710P2-AC, BX710P4-AC
Function
Power switch
4
Ver.1.01
System Configuration
Minimum distance for installing / removing drive
CAUTION
Installation Requirements
The BOX-PC can be installed in any orientation (1) through (3).
Avoid orientation (4) through (6) since it might not adequately
dissipate heat. In addition, take appropriate measures so that
the ambient temperature falls within the range of installation
environment conditions, such as keeping the system unit
well-ventilated and sufficiently spaced its surroundings.
-
The wall temperature must be under the product assurance temperature.
Please adjust the air current to prevent the reject heat from the product
staying around the product.
Do not install this product into the fully-sealed space except the case in
which the internal temperature is adjustable by equipment such as air
conditioner. Troubles such as operational malfunctions could be occurred
by the temperature increase caused by long-term usage.
Installation Orientation
CAUTION
Note that even though the ambient temperature is within the specified range,
an operational malfunction may occur if there is other device generating
high heat; the radiation will influence the product to increase its
temperature.
Distances between the BOX-PC and Its Vicinity
BX-710-AC, BX710P2-AC, BX710P4-AC
5
Download PDF

advertising