Instruction manual | Cortelco 2420 Telephone User Manual

2420 Big Button Caller ID Speaker Phone
INSTRUCTION MANUAL
Contents
Important Safety Instructions …………………………………………………..………....4
Installing Your Phone …….………………….. ……………………………………………4
Telephone Operation
Making and Receiving calls …………………………...…………………. ………………5
Speakerphone……………………..…………..…………………….…………. ……....5
Call Timer…………………………………………………………………..……………….6
LCD Backlight Display ..…………………………………..………………………….....6
Connecting An Optional Headset…………..……………………………………….....6
Muting A Call….…………………………………………………………………………....6
Placing A Call on Hold….…………………………………………………………………...6
Music On Hold…………….…………….……………………………………...………....6
Using Flash………………….…………………………………………………………….6
Using Tone Service on A Pulse Line………………………………………………......6
Programming The Emergency Buttons…………………………………………..……….6
Amplification Features
Incoming Voice Volume…………………………………………………….....……….…...7
Incoming Voice Tone….…………………………………………………….....……….…...7
Ringer Volume………………….. ………………………………………….....……….…...7
Speaker Volume……………. ..…………………………………………….....……….…...7
Handset Volume…………………………………………………………….....……….…...7
Handset Tone………….…………………………………………………….....……….…...7
Adjusting Ringer Tone…. ………………………………………………….....……….…...7
Memory Operation
Storing An Entry…………….…………………………………………………..…………...7
Pause………………………………………………………………………………...……….8
Review A Number From the Memory ..…………………………………………………....8
Dialing A Number From the Memory…..…………………………………………………..8
Using The One-Touch Speed Dial Memory……. .………………………………...……..9
Changing A Speed Dial Number…….……………………………….....………………....9
Cloning A speed Dial Number………………………………………..…………………….9
Deleting A Speed Dial Number………………………………..................………………..9
Deleting All Memory Entry………………………………..................………… . ………..9
Redial………………………………………………………………………………………....9
2
Caller ID/Memory
Using Caller ID ……………………… ..…………………………………………………....9
Setting The Long Distance Code…..……………………...……………………………....9
Setting The Area Code……………….…………………………………………………...10
Phone Record……………………………………………… ..…… ..…........…………....10
Caller ID On Call Waiting……………….………………………………………………....10
Caller ID Summary……………………………………............…………………………..10
Call Review…………………………....……………………………………………….......10
Missed Call …………………………..………………. ….. ……………………………....10
Answered Call…….………………………...………………………….…………..………10
Dialed Number…………………………….……………….....……………………………10
Deleting A Call From the Call History …………………………………………...………11
Deleting All Calls……………………………. ………………………………….………………………...11
Transferring A Caller ID Number To Speed Dial Memory……………….………..……11
Speed Dialing From The Caller ID List ……………………………………….......…….11
Different Area Code….…………………………………………………………………….11
Same Area Code……… …………………………………………..………………………11
Display Information
Call Display Messages .. …..……………………………………..………………………11
Call Forwarding …..………………………………………………………………………..12
Adnanced User Options Menu
VIP………………………………………………………………..........…………………....12
VIP Alert On/Off…..……………………………………………..........…………………....12
Name Tagging…… ….. ………………………………………..........…………………....12
Setting The Language….. ……………………………………..........…………………....12
LCD Contrast..…………………………………………………..........…………………....13
Time/Date………………………………………………………..........…………………....13
Call Wait ID On/Off……………………………………………..........…………………....13
Message Waiting ……………………………………………..……….....………………..13
Battery Compartment ………………………………………..……….....………………..13
Resetting The Phone…………………………………………..........…………………....13
FCC Information …………………………………………………………...............….….14
Industry Canada Information…………………………..……………........……………....15
Limited Warranty…………………………………………………………….....................16
3
2420 Big Button Caller ID Speaker Phone INSTRUCTION
MANUAL
IMPORTANT SAFETY INSTRUCTIONS
Always follow basic safety precautions when using your telephone equipment to reduce the risk of fire,
electrical shock, and injury.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
Read and understand all instructions in the Owner’s Instruction Manual.
Read all warnings and follow all instructions marked on the product.
Unplug this product from the wall outlet before cleaning. Use a damp cloth for cleaning. Do not
use liquid or aerosol cleaners.
Do not use the telephone near water. For example, do not use near a bathtub, wash bowl, kitchen
sink, laundry tub, swimming pool, or in a wet basement.
Do not place this product on an unstable cart or stand. The product may fall causing serious
damage to the product.
Use only the type power source indicated on the label. If you are not sure of the type power
supply to your home, consult your dealer or local power company.
Do not place any objects on the telephone line cord. Do not locate the telephone where the line
cord will be walked on.
Do not block or cover ventilation slots and openings in the bottom of the telephone. The
openings should never be blocked by placing the telephone on a bed, sofa, rug, or other similar
surfaces. The telephone should never be placed near or over a radiator or heat register. The
telephone should never be placed in a built-in installation unless proper ventilation is provided.
Never spill liquid on the telephone or push objects of any kind through ventilation slots.
Liquid or objects may touch dangerous voltage points or short out parts that could result in a risk of
fire or electrical shock.
Do not disassemble this product. Opening or removing covers may expose you to dangerous
voltages or other risks. Incorrect reassembly can cause electrical shock when the product is
subsequently used.
Do not overload outlets and extension cords. Some telephones require AC power from an outlet.
Overloading the outlets can result in the risk of fire or electric shock.
Avoid using a telephone during a local thunderstorm. There may be a remote risk of electrical
shock from lightning. The spec. of fuse (F1) is 0.5A/250V delay time .
Do not use a telephone to report a gas leak in the vicinity of the leak.
Unplug the telephone from the wall outlet and refer servicing to qualified service personnel
under the following conditions:
•
When the line cord is frayed or plugs damaged.
•
If liquid has been spilled into the telephone.
•
If the telephone has been exposed to rain or water.
•
If the telephone does not operate properly by following the operating instructions. (Adjust
only those controls covered by the operating instructions. Improper adjustment of other
controls may result in damage and will often require extensive work by a qualified
technician to restore the product to normal operation.)
•
If the telephone has been dropped or the housing damaged.
•
If the telephone exhibits distinct change in performance.
CAUTION-Always disconnect all telephone lines from the wall outlet before servicing or
disassembling this equipment.
SAVE THESE INSTRUCTIONS
4
READ THIS BEFORE INSTALLATION
INSTALLING YOUR PHONE
1.
Plug one end of the Handset Cord (curly) into the Handset and the other end into the jack on the side of the
telephone.
2.
Plug one end of the line cord (straight) into the telephone line jack on the back of the telephone and the other end
into the telephone modular wall jack.
3.
Plug the AC Adaptor into a standard AC wall outlet. Plug the AC Adaptor lead into the power socket at the back
of the phone.
The telephone will beep and the display will show SET TIME / DATE. Assuming you subscribe to a Caller ID service, the
time and date will be automatically updated when the first call is received. After 10 seconds the display will show the
number of calls received MISSED -00-, ANSWER -00NOTE: When the telephone is not in use, if the line is being used by another phone, the display shows EXTENSION USE.
12: 0 0
AM
01/01
-00-
12: 0 0
AM
01/01
→
-00-
MISSED ANSWER
EXTENSION USE
OPERATION
TELEPHONE OPERATION
MAKING AND RECEIVING CALLS
HANDSET
SPEAKERPHONE
MAKING A CALL
1. Pick up the Handset from the Base.
2. Dial desired number.
3. Hang up upon completion of the call.
1. Key in desired telephone number.
2. Press DIAL (The phone goes to
speakerphone mode automatically).
3. To hang up, press SPEAKER key.
RECEIVING A CALL
1. Pick up the Handset from the Base.
2. Speak.
3. Hang up upon completion of the call.
1. Press SPEAKER key. Speak.
2. To hang up, press SPEAKER key again.
8:30
AM
8:30
AM
→
00-00
= = TA L K = =
8:30
5551212
DIALING…
AM
8:30
AM
→
00-00
5551212
SPEAKERPHONE
DIALING…
NOTE:
While the making a call, the DIAL KEYPAD LED will come on
While the phone is ringing, the RING LAMP and DIAL KEYPAD LED will light
SPEAKPHONE
You can place a call on Speakerphone mode anytime by pressing SPEAKER during a call then placing the Handset on the
base. Also, you can transfer a call to the Handset anytime during a call by picking up the Handset. During speakerphone
5
operation, the display will show SPEAKERPHONE, and the SPEAKER LED will light.
During handset operation, the display will show == TALK == and
will appear.
CALL TIMER
When the handset is picked up or the SPEAKER button is pressed, the call counter will begin and show the elapsed time
on the display screen.
LCD BACKLIGHT DISPLAY
The LCD has a backlight that will turn on under the following conditions;
•
Incoming call
•
Picking up the handset
•
Pressing any button
NOTE:
The backlight will switch off automatically approximately 15 seconds after the last activity.
The AC Adapter must be plugged into the unit to enable BACK LIGHT to work.
CONNECTING AN OPTIONAL HEADSET
Your phone is equipped with a headset jack on the base. This jack allows you to connect a headset with a 2.5 mm plug.
NOTE: You cannot use the speakerphone with a headset connected to the phone.
MUTING A CALL
Press MUTE to turn off the handset microphone, allowing private conversations in the same room without the other party
hearing. Press MUTE again to resume the conversation with the calling party.
NOTE: During the mute condition, the display will show < MIC MUTE >.
PLACING A CALL ON HOLD
1.
2.
To place a call on hold, press HOLD and hang up. The HOLD LED will light; the display will show < CALL ON
HOLD >.
To begin the conversation again, pick up the handset, press SPEAKER, or pick up an extension phone. The hold
will then be automatically released.
MUSIC ON HOLD
When a call is placed on hold, the telephone will play music to reassure your caller that the call has not been disconnected.
USING FLASH
Press FLASH to perform the switch hook operation for special services, such as Call Waiting.
For example, if you have Call Waiting, press FLASH to take an incoming call without disconnecting the current call. Press
FLASH again to return to the first call.
NOTE: If you do not have special phone services, pressing FLASH might disconnect the current call.
During memory storage, you may press FLASH to insert a flash; an ‘F’ will show on the LCD between numbers.
USING TONE SERVICES ON A PULSE LINE
If you have pulse service, you can still use special services that require tone signals, such as bank-by-phone, by following
these steps.
1. Be sure T/P is set to P
2. Dial the service's main number.
or #. Any additional numbers you dial will then be sent as tone signals.
3. When the service answers, press
4. After you complete the call and hang up, the phone resets to pulse dialing.
PROGRAMMING THE EMERGENCY BUTTONS
6
Three emergency numbers can be stored into one touch speed dial. You may wish to store the numbers of your local
police, fire department and EMS services on the Emergency Speed-Dial Buttons, so that you can quickly dial them.
1.
2.
3.
4.
Program these numbers by pressing the STORE button, then the desired Emergency Button.
Enter the phone number you wish to assign to the Emergency Button.
Press STORE twice. (Keypad will not emit any tones while in memory store mode)
Repeat in turn for each emergency service.
To call one of the Emergency button numbers, lift the handset or press the Speaker button and then press the
Emergency button.
AMPLIFICATION FEATURES
INCOMING VOICE VOLUME
You can adjust the volume of incoming calls by sliding the VOL control. This gives you up to18 dB of volume adjustment. If
you need more amplification, follow the directions below.
1. After picking up the handset, press AMPLIFY. When AMPLIFY is on, the ))) icon appears and the AMPLIFY
LED comes on.
2. Adjust the volume in the earpiece by moving the VOL slide control. With AMPLIFY on the incoming volume can
be made up to 40dB louder.
In standard use, the amplifier turns off whenever you hang up the telephone. This is a useful feature if many people use the
phone. If you want the amplifier to always remain on, slide the switch underneath the phone to AUTO. The amplifier turns
off when you switch to Speakerphone mode.
INCOMING VOICE TONE
The product provides extra amplification at the sound frequencies you need to boost. To identify this frequency range,
follow these steps:
1. Pick up the handset and press AMPLIFY.
2. Adjust the TONE slide control until the incoming voice can be easily heard.
RINGER VOLUME
You can adjust the ringer volume by moving the RINGER VOL. switch located on the right side of the telephone.
ringer can be set to either OFF, LO or HI volume.
The
SPEAKER VOLUME
While on a speakerphone call, press VOLUME + or -, located at the right side of the telephone, to adjust the level.
HANDSET VOLUME
While on a handset call, adjust the VOL switch, located at the front side of the telephone, to the desired level.
HANDSET TONE
While on a call, adjust the TONE switch, located at the front side of the telephone, to the desired tone level.
ADJUSTING RINGER TONE
You can adjust the ringer tone of your telephone by moving the RINGER TONE switch, located at the right side of the
telephone, to the desired HI/LO position.
MEMORY OPERATION
Notes:
•
100 phone numbers can be programmed into the MEMORY of your telephone
•
Each memory location can store a maximum of 32 digits and 15 letters.
•
You must complete each step within 15 seconds.
•
You can store phone numbers with the handset on or off hook.
STORING AN ENTRY
For Example: To program the telephone number for Cortelco, (662)555-1234 into memory
1. Press STORE (Display shows STORE TO ?)
2. Press either a one-touch memory location or MEMORY (Display shows NUMBER ?)
3. Enter the phone number 6 6 2 5 5 5 1 2 3 4 using the keypad. Note: You may need to store a 1 if the number
has different area code than yours.
4. Press STORE or OK (Display shows NAME ?)
5. Enter the name C O R T E L C O using the keypad (222 666 777 8 33 555 222 666)
7
6. Press STORE or OK, the phone will beep and the display will show STORED
If you do not want to store a name, skip step 4
Figure 1
Figure 2
6:40 A M
6:40 A M
03/05
03/05
0STORE TO ?
Figure 3
NUMBER ?
Figure 4
6:40 A M
6:40 A M
03/05
0295993577
NAME ?
0295993577
M_
NOTES:
•
To add a space before another word, press 1 once.
•
If you make a mistake while entering the number, or name. Press
move the cursor left and press DELETE to delete the letter.
•
Letters are always inserted to the left of the cursor
Key
1
2
3
4
5
6
7
8
9
*
0
#
1st
Press
A
D
G
J
M
P
T
W
*
0
#
2nd
Press
B
E
H
K
N
Q
U
X
*
0
#
03/05
3rd
Press
’
C
F
I
L
O
R
V
Y
*
0
#
4th
Press
(
2
3
4
5
6
S
8
Z
*
0
#
5th
Press
)
A
D
G
J
M
7
T
9
*
0
#
6th
Press
&
B
E
H
K
N
P
U
W
*
0
#
to move the cursor right, press
7th
Press
,
C
F
I
L
O
Q
V
X
*
0
#
8th
Press
.
2
3
4
5
6
R
8
Y
*
0
#
to
9th
Press
1
A
D
G
J
M
S
T
Z
*
0
#
PAUSE
During the memory storage procedure, press R/P to insert a pause between numbers.
Each time R/P is pressed, a ‘P’ will show on the LCD to indicate a 2 second pause in the dialing sequence. Each pause
counts as one digit.
Pressing R/P more than once will increase the pause between digits.
REVIEW A NUMBER FROM THE MEMORY
Press MEMORY (Display shows ITEM -XX-, XX is the number of memories stored in the MEMORY), enter the first letter of
the name (e.g “E” for EMMA): Press number 3 twice and scroll with
until the display shows the name and number that
you want to review.
NOTE: If the number is longer than 15 digits, the number will shift left automatically until the end of the number has been
reached. The phone will exit automatically approximately 15 seconds after the last activity.
DIALING A NUMBER FROM THE MEMORY
There are three different ways to dial a stored speed dial number, depending on your preference.
1. Pick up the handset and follow the sequence ‘REVIEW A NUMBER FROM THE MEMORY’ until the display
shows the name and number that you want to dial, and then press DIAL.
2. Press SPEAKER and follow the sequence ‘REVIEW A NUMBER FROM THE MEMORY’ until the display shows
the name and number that you want to dial, then press DIAL.
3. Follow the sequence ‘REVIEW A NUMBER FROM THE MEMORY’ and check the LCD until the correct
information is displayed. Press DIAL (the phone enters speakerphone mode and dials the displayed number).
8
USING THE ONE-TOUCH SPEED DIAL MEMORY
There are two ways to dial a one-touch speed dial memory.
1. Press a one-touch memory key. The display will show the number. Press DIAL
2. Pick up the handset or press SPEAKER, and then press a one-touch memory key. The phone will dial the
number automatically.
CHANGING A SPEED DIAL NUMBER
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Display the number you wish to edit.
Press OK. The display shows NUMBER? The cursor will be on the right of the last digit.
Move the cursor to the digit you would like to edit by using
or
.
Press DELETE to delete the digit.
Enter the desired digit(s) using the keypad.
Press STORE or OK. The cursor will be on the right of the last letter.
Move the cursor to the letter to be edited by using
or .
Press DELETE to delete the letter.
Enter the desired letter(s) using the keypad.
Press STORE or OK. The phone will beep and the display will show STORED.
CLONING A SPEED DIAL NUMBER
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Display the number you wish to clone.
Press STORE. The display shows STORE TO?
Press either a one-touch memory location or MEMORY and the location to store the number.
The display shows NUMBER? The cursor will be on the right of the last digit.
Move the cursor to the digit you would like to edit by using
or
.
Press DELETE to delete the digit.
Enter the desired digits(s) using the keypad.
Press STORE or OK. The cursor will be on the right of the last letter.
Move the cursor to the letter to be edited by using
or
.
Press DELETE to delete the letter(s).
Enter the desired letter(s) using the keypad.
Press STORE or OK. The phone will beep and the display will show STORED.
NOTES:
•
One-touch memory locations accept duplicate phone numbers, but the MEMORY does not.
•
If the number matches one stored in MEMORY, the phone will show REPLACE?. Press STORE or OK.
phone will beep and the display will show STORED.
The
DELETING A SPEED DIAL NUMBER
1.
2.
3.
4.
Display the number you wish to clone.
Press DELETE (Display shows DELETE ?).
Press DELETE or OK.
The phone beeps and the display shows DELETED.
DELETING ALL MEMORY ENTRY
1.
2.
3.
Press MEMORY (Display shows ITEM -XX-).
Press DELETE (Display shows CLEAR MEMORY ? ).
Press DELETE or OK to confirm your choice. The phone beeps and the display shows DELETED.
REDIAL
There are two ways to redial the last number dialed.
1. Press R/P and the display will show the latest dialed number. Press DIAL. The telephone will redial the last
number dialed (the phone enters speakerphone mode and dials the displayed number).
2. Pick up the handset or press SPEAKER. Press R/P. The telephone will redial the last number dialed.
NOTE: The redial memory stores the first 32 digits of any number dialed. If the number you dialed exceeds 32 digits, the
redial memory will store the first 32 digits only.
Caller ID/MEMORY
USING CALLER ID
To use these features, you must first subscribe to Caller ID Service from the telephone company.
There is usually a fee for this service, and it may not be available in all areas.
SETTING THE LONG DISTANCE CODE
The Long Distance Code has a default setting of 1. You can change the code to “9” if you use a PBX telephone system or
“0” if your telephone system requires operator assistance to make a long distance call.
9
NOTE: If you do not complete each step within 15 seconds, the phone exits setup. Start again at Step 1.
1.
2.
3.
Press MENU until-1- and “SET LDS CODE” appears. 1 flashes.
Press
or
to set the long distance code to 1, 9, or 0.
Press OK or MENU to complete the setting and go to next setting, or press DELETE to complete the setting and
return to standby mode.
SETTING THE AREA CODE
1.
2.
3.
4.
Press MENU button until -000- and “SET AREA CODE” appears. The first 0 flashes.
Press
to increase the digit,
to decrease the digit, or use the keypad buttons to set the code manually.
Press OK to move between the different digits.
Press MENU to complete the setting and go to next setting, or press DELETE to complete the setting and return
to standby mode.
NOTE: The default AREA CODE setting is 000.
PHONE RECORD
When you use this telephone with the Caller ID service, you will see the number of the calling party (unless the number
is blocked) before you answer the phone. This telephone will store and display the last 50 missed calls and the last 50
answered calls. When the memory is full, the oldest call information is deleted to make room for new incoming call
information. The telephone also stores and displays information about the last 10 dialed numbers (max 11 digits).
CALLER ID ON CALL WAITING
This feature allows you to see the number of the calling party (unless the number is blocked) if you are on a call and
receive another call. To use this feature, you must subscribe to Caller ID and Call Waiting from the Telephone company.
CALLER ID SUMMARY
The display will show the caller ID summary (MISSED -XX-, ANSWER -XX-) in standby (where XX is the number of missed
and answered calls stored in the memory).
CALL REVIEW
To review call information, you can press MODE. This allows you to review MISSED CALLS, ANSWERED CALLS, or
DIALED NUMBERS. During review, you can use function keys to call, store or delete the phone number.
MISSED CALL
1.
2.
Press MODE, until the display shows MISSED CALL -XX-.
or
to view the missed calls. The new call LED will flash if there are new missed calls.
Use
6:40 A M
03/05
6:40 A M
-05-
03/05
01
555-1212
MISSED CALL
JOHN SMITH
When all missed calls have been reviewed, the new call LED will stop flashing.
ANSWERED CALL
1.
2.
Press MODE, until the display shows ANSWERED CALL -XX-.
or
to view the answered calls.
Use
6:40 A M
6:40 A M
03/05
ANSWERED CALL
03/05
01
555-1212
-06-
JOHN SMITH
DIALED NUMBER
10 dialed numbers can be stored into the redial memory. When the redial memory is full, the oldest dialed information is
deleted to make room for new dialed information.
1.
2.
Press MODE until the display shows DIALED NUMBER -XX-.
Use
or
to view the dialed calls.
10
6:40 A M
6:40 A M
03/05
-06DIALED NUMBER
03/05
01
555-1212
JOHN SMITH
Press MODE to return to standby.
DELETING A CALL FROM THE CALL HISTORY
To delete a call from the call history;
1. Use
or
until the screen displays the information you wish to delete.
2. Press DELETE once and the display will show DELETE ?
3. Press DELETE or OK. The phone will beep once, the displayed call record will be deleted and the display will
show DELETED.
DELETING ALL CALLS
To delete all calls from three primary functions individually, the display must be showing either MISSED CALL,
ANSWERED CALL or DIALED NUMBER.
1. Press DELETE once and the display will show DELETE ALL ?
2. Press DELETE or OK. The phone will beep once, all call records will be deleted and the display will show
DELETED.
NOTE: New missed calls can not be deleted until they have been reviewed.
TRANSFERING A CALLER ID NUMBER TO SPEED DIAL MEMORY
1.
2.
3.
4.
5.
or
to scroll through the call history to the number you wish to transfer.
Use
If the dial format is not correct, press OK to change it.
Press STORE when the number displayed is correct. The display will show STORE TO?.
Press either a one-touch memory location or MEMORY.
Press STORE twice, the phone will beep once, and the display will show STORED.
NOTE: One-touch memory locations accept duplicate phone numbers, but the MEMORY does not.
If the number that matches one stored in MEMORY, the phone will show REPLACE ?. Press STORE or OK, the phone will
beep and the display will show STORED.
The OK button also provides dialing options for different phone systems allowing you to select the correct option for a
phone number before you press DIAL.
SPEED DIALING FROM THE CALLER ID LIST
DIFFERENT AREA CODE
When the phone number's area code does not match the stored area code, the phone provides two dialing number
selections.
•
Pressing OK once, shows the ten-digit number (three digits of the area code plus seven digits of the phone
number, for example, 818-555-1212).
•
Pressing OK again causes a 1 to appear before the ten-digit number (1-818-555-1212).
SAME AREA CODE
If the phone number's area code matches the stored area code , the phone provides four different dialing options.
Repeatedly pressing OK will cycle through these options.
•
Seven-digit number — for example, 555-1212.
•
Eight-digit number (“1” plus the phone number) — for example, 1-555-1212.
•
Ten-digit number — for example, 817-555-1212.
•
Eleven-digit number (“1” plus the area code plus the phone number) — for example, 1-817-555-1212.
To callback a phone number from Caller records with the speakerphone, press DIAL with the number displayed.
speakerphone will activate and the number will be dialed.
The
DISPLAY INFORMATION
CALL DISPLAY MESSAGES
PRIVATE means the caller has chosen to block their number or they are calling from an exchange that does not offer
Caller ID.
11
OUT OF AREA usually means the call is coming from another country.
TOLL means the incoming call is long distance.
REPEAT XX means this number already exists in the Caller ID memory.
repeated. The maximum repeat counter is 15.
6:40 A M
03/05
XX is the number of times the number is
6:40 A M
01
555-1212
03/05
01
555-1212
REPEAT 01
JOHN SMITH
CALL FORWARDING
If you subscribe to call forwarding, the phone company will send calls from your telephone to another telephone. Phone
companies usually offer three call forwarding services — Call Forward Universal, Call Forward Busy, and Call Forward No
Answer.
If you subscribe to Call Forward Universal, all calls will be forwarded to the designated number.
If you subscribe to Call Forward Busy, calls will be forwarded to the designated number when your phone is busy.
If you subscribe to Call Forward No Answer, calls will be forwarded to the designated number when your phone is not
answered.
END OF LIST or TOP OF LIST on the screen means you have reached the end or start of the caller id history.
MISSED -00- on the screen means no missed calls are stored in the missed caller id memory.
ANSWER -00- on the screen means no answered calls are stored in the answered caller id memory.
NO RECORD on the screen means no calls are stored in the caller id memory.
ADVANCED USER OPTIONS MENU
VIP
When the phone number of an incoming call is matched with a number stored in MEMORY, the symbol VIP will be
displayed. If VIP ALERT is on, the telephone will sound a special VIP tone when receiving a VIP call.
VIP ALERT ON/OFF
1.
2.
3.
Repeatedly press MENU until “VIP ALERT ON” appears.
or
to choose VIP ALERT ON/OFF.
Press
Press OK or MENU to complete the setting, or press DELETE or MODE to complete the setting and return to
standby mode.
NOTES:
With VIP alert set to ON, the symbol
The default VIP alert setting is ON.
will be displayed.
NAME TAGGING
When the phone number of an incoming call is matched a number stored in MEMORY, the name stored in the MEMORY
will be displayed with the caller id number. The name in the speed dial memory can be personalized.
NOTE: You must subscribe to Caller ID Service for this feature to work.
TIPS:
•
•
Always store names with the numbers in your MEMORY to maximize the benefit of this feature.
Store area code together with the phone number in the MEMORY.
SETTING THE LANGUAGE
You can choose ENGLISH (default), FRENCH (FRANCAIS) or SPANISH (ESPANOL) as the message language.
1.
2.
3.
Press MENU display shows “ENG FRN SPN “
Press
or
to choose language ENGLISH or FRENCH or SPANISH.
Press OK or MENU to complete the setting and go to next setting, or press DELETE to complete the setting and
return to standby mode.
12
LCD CONTRAST
1.
2.
3.
4.
Press MENU until -3- and “LCD CONTRAST” appears. -3- flashes.
Use the dial pad to key in the value or press
to increase the setting,
to decrease the setting. The phone
has five (1–5) display contrast settings.
Press OK or MENU to complete the setting and go to next setting, or press DELETE to complete the setting and
return to standby mode.
The default LCD CONTRAST setting is 3.
TIME/DATE
NOTE: It is not necessary to set the time and date if you have Caller ID service.
1.
2.
3.
4.
Repeatedly press MENU button until “SET TIME/DATE“ appears and the hour flashes.
Press
to increase the setting,
to decrease the setting. Or use the keypad buttons to set the time and date
manually. Press
or
to choose AM, PM.
Press OK to move between the different settings. The default time/date setting is 12:00 am 01/01(hh:mm
mm/dd). The local clock will also be updated automatically when a caller ID is received.
Press MENU to complete the setting and go to next setting, or press DELETE to fail the setting and return to
standby mode.
CALL WAIT ID ON/OFF
1.
2.
3.
Repeatedly press MENU until “CALL WAIT ID ON“ appears.
Press
or
to choose CALL WAIT ID ON/OFF. The default CALL WAIT ID setting is OFF.
Press OK or MENU to complete the setting, or press DELETE to complete the setting and return to standby
mode.
MESSAGE WAITING
If you subscribe to your phone company's message waiting service, your phone will inform you when you have a message.
When you receive a message, the display will show MSG WAITING ON and and the new call LED will flash. MSG
WAITING ON disappears from the display after 8 seconds, but is displayed and the new call LED will flash until you
retrieve the message.
NOTE:
The phone is compatible with both FSK and Stutter Dial Tone message waiting.
phone to disable the Stutter Dial Tone message waiting.
There is a switch on the base of the
BATTERY COMPARTMENT
Your phone has a battery compartment which will hold 4 AA batteries. These batteries are not necessary for normal
operation. If the batteries are installed, the Caller ID and the handset amplifier will continue to work during a power failure.
RESETTING THE PHONE
If your phone stops working properly, use a straightened paper clip to press RESET on the back of the phone.
13
FCC INFORMATION
Part 68 is a Federal regulation which requires equipment to be tested and registered with the FCC prior to its
connection to the network. This equipment complies with Part 68 of FCC rules. On the bottom of the telephone is a
label that contains, among other information, the FCC Registration Number and the Ringer Equivalence Number
(REN) for this equipment. You must, upon request, provide this information to your telephone company.
The Ringer Equivalence Number, which is used to determine the number of devices you may connect to your
phone line, indicates the amount of power that your telephone draws from the telephone company line during
ringing. If you have more than one telephone (or other terminal device) connected to the telephone company line,
you should total the ringer equivalence numbers (REN s), and be sure that the total is not more than five. Your
telephones may not ring if the total is more than five. Also, in some rural locations, your telephone may not ring if the
REN total is more than three.
RESTRICTIONS You must not connect your telephone to coin-operated lines or party lines.
INSTALLATION This model telephone must be connected to the telephone company lines through a modular jack.
The required USOC for the modular jack is RJ11C for desk mounting and RJ11W for wall mounting. The USOC
number is printed on the label on the bottom of your telephone.
HEARING-AID COMPATIBILITY The handset on your telephone will work with magnetically-coupled hearing aids.
You can use a hearing aid equipped with a T (Telephone) switch.
IN CASE OF TROUBLE If your telephone should cause problems on the telephone line, the telephone company
can temporarily disconnect your service. The telephone company must then notify and allow you to correct the
problem. The telephone company may from time to time change its lines or equipment. They must notify you if
planned changes will affect your telephone service, to allow you to take steps to prevent interruptions.
Part 15 regulates the electromagnetic energy emitted by equipment to minimize interference to radio, television,
and other wirless devices. This telephone complies with Part 15 of the FCC Rules. In the unlikely event that
interference occurs, move the telephone and/or radio, television, etc. to increase the separation distance
14
Industry Canada Information
NOTICE: The Industry Canada label identifies certified equipment. This certification means that the equipment meets
certain Telecommunications network protective Operational and safety requirements. Industry Canada does not guarantee
the equipment will operate to the user’s satisfaction.
Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local
telecommunications company. The equipment must also be installed using an acceptable method of connections. The
customer should be aware that compliance with the above conditions might not prevent degradation of service in some
situations.
Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier.
Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the
telecommunications company cause to request the user to disconnect the equipment.
Warning! Users should not attempt to make such connections themselves, but should contact the appropriate electric
inspection authority or electrician as appropriate.
Caution: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum
number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any
combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices
does not exceed 5. The REN Number of the unit is 0.7.
Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must
accept any interference including interference that may cause undesired operation of the device.
15
LIMITED WARRANTY
If you purchased this product new in the U.S. or Puerto Rico, CORTELCO
warrants it against defects in material and workmanship for a period of one (1)
year from the date of original purchase. This warranty is in lieu of all other
express warranties. During the warranty period, CORTELCO agrees to repair or,
at its option, replace the defective product, or any part of it without charge for
parts or labor. This is your exclusive remedy. This warranty does not cover
damage resulting from accident, misuse, abuse, improper installation or operation,
lack of reasonable care, the affixing of any attachment not provided by
CORTELCO with the product and loss of parts. The warranty is voided in the
event any unauthorized person alters or repairs the unit.
Telephone companies use different types of equipment and offer various types of
services to customers. CORTELCO does not warrant that this product is
compatible with the type of equipment of any particular phone company
or the services provided by it.
CORTELCO DISCLAIMS ANY IMPLIED WARRANTY, INCLUDING THE WARRANTY
OF MERCHANTABILITY AND THE WARRANTY OF FITNESS FOR A PARTICULAR
PURPOSE, AS OF THE DATE ONE YEAR FROM THE ORIGINAL PURCHASE OF THE
PRODUCT. CORTELCO ASSUMES NO RESPONSIBILITY FOR ANY SPECIAL, INCIDENTAL
ORCONSEQUENTIAL DAMAGES.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE
OTHER RIGHTS WHICH VARY FROM STATE TO STATE. SOME STATES DO NOT
ALLOW THE EXCLUSION OR LIMITATION OF SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES OR LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY
LASTS, SO THE ABOVE EXCLUSION AND LIMITATION MAY NOT APPLY TO YOU.
If failure occurs and your telephone is in warranty, service shall be provided by
returning it to CORTELCO - Repair Center, 1703 Sawyer Road, Corinth, Mississippi
38834, shipping prepaid. The product will be repaired or replaced if
examination by us determines the product to be defective. Telephones received
damaged as a result of shipping will require you to file a claim with the carrier.
Rev. 2.0
16
Download PDF

advertising