Craftsman 315.79889 Trimmer User Manual

Owner's Manual
20 in.
HEDGE TRIMMER
Double Insulated
Model No,
315.798890
Save this manual for
future reference.
CAUTION: Read and follow
all Safety Rules and Operating
Instructions before first use of
this product.
Customer
Help Line: 1-800-932-3188
Sears,
Roebuck
and Co., Hoffman
Estates,
IL 60179
Visit the Craftsman web page: www.sears.com/craftsman
972000-600
3-99
• Safety
° Assembly
° Operation
• Customer Responsibilities
• Parts List
USA
NRTL
•
Table Of Contents ..............
...............................................................................
•
Warranty and Introduction,.
.........................................................................................
• ' -R Ulesl_0r: Safe' 0peraiion
•
,Ss'er"bi I.IYTIYIIITTLIILTTTI..I
* .........
2
......................................................................................
3-5
......................................................................................
5-6
•
Operation....:::::::-.:._?.i_:..:::o:
................................................................................
•
Customer Responsil_i!ities
.....
....................................................................................
•
E:<plodedView and FlepairParts List......................................................................................................
•
PartsOrdering !Service ............_..................................................................................................................
FULL ONE YEAR WARRANTY
ON CRAFTSMAN
2
ELECTRIC
,.,,,,
6-8
g_11
12-13
14
HEDGE TRIMMER
If this CRRFTSMI1N Electric Hedge Trimmer fails to perform properly due to a defect in material or workmanship
within (1) one year from the date of purchase, Sears will repair or replace it, free of charge.
WARRANTY SERVICE IS AVAILABLE
STORE IN THE UNITED STATES.
BY RETURNING
THE HEDGE TRIMMER
TO THE NEAREST
SEARS
This warranty gives you specific legal rights, and you may also have other rights which yaw from state to state.
Sears, Roebuck
and Co., Dept. 817WA,
Hoffman
Estates,
Your hedge trimmer has many features for making
trimming operations more pleasant and enjoyable.
Safety, performance and dependability have been
given top priority in the design of this hedge trimmer
making it easy to maintain and operate.
,_
Look for this symbol
safety is involved.
ELECTRICAL
to point out important
IL 60179
_1= CAUTION:
Carefully read through this entire
owner's manual before using your new hedge
trimmer. Pay close attention to the Rules For
Safe Operation, Warnings and Cautions. If you
use your hedge trimmer properly and only for
what it is intended, you will enjoy years of safe,
reliable service.
safety precautions,
It means attention!!!
Your
CONNECTION
Your hedge trimmer has a precision built electric motor. It should be connected to a power supply that is 120
volts, 60 Hz, AC only (normal household current). Do not operate this tool on direct current (DC). A
substantial voltage drop will cause a loss of power and the motor wilt overheat. If your hedge trimmer does not
operate when plugged into an outlet, double check the power supply.
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and
the explanations with them, deserve your careful attention and understanding. The safety warnings do
not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for
proper accident prevention measures.
SYMBOL
MEANING
SAFETY ALERT SYMBOL:
_ndi_atesdanger_waming__rcauti_n_Maybeu_edinconjuncti_nwith_ther_ymb_i__rpict_graph_.
DANGER: Failure to obey a safety warning willresult in serious injuryto yourselfor to others.
Always follow the safety precautionsto reduce the risk of fire, electricshock and personal injury.
,_.
WARNING: Failure to obey a safety warningcan resultin seriousinjuryto yourselfor to others.
Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury.
A
CAUTION: Failure to obey a safety warning may resultin propertydamage or personal injuryto
yourself or to others. Always follow the safety precautionsto reduce the riskof fire, electricshock and
personal injury.
NOTE:
DOUBLE
Advises you of informationor instructionsvital to the operation or maintenanceof the equipment.
INSULATION
IMPORTANT
Double insulationis a concept in safety, in electric
power tools which eliminates the need for the usual
three-wire grounded power cord. All exposed metal
parts are isolated from internal metal motor
componentswith protecting insulation.Double
insulatedtools do not need to be grounded.
_I,
,_
Servicing of a tool with double insulationrequires
extreme care and knowledgeof the system and
shouldbe performedonly by a qualified service
technician. For service we suggest you returnthe tool
to your nearest Seam Store for repair. Always use
originalfactory replacementparts when servicing.
substantial footwear is recommended when
WARNING: Do not attemptto operate this tool
untilyou have read thoroughly and understand
completely all instructions,safety rules, etc.
contained in this manual. Failure to complycan
resultin accidents involvingfire, electric shock,
or serious personal injury. Save owner's manual
and review frequently for continuingsafe
operation, and instructingothers who may use
this tool.
working outdoors. Wear protective hair
covering to contain long ha r!
USE SAFETY GLASSES. Always use face
or dust mask if operation is dusty.
STAY ALERT. Watch what you are doing
and use common sense. Do not operate
trimmer when you are tired.
WARNING: When using electric hedge
trimmers, basic safety precautions should always
be followedto reduce the risk of fire, electric
shock, and personal injury, includingthe
following:
DANGER: Risk of cut or shock - Keep
hands away from blades. Keep both
hands on handles when power is on. Do
not attempt to remove cut material nor
hold material to be cut when blades are
READ ALL INSTRUCTIONS
•
KNOW YOUR POWER TOOL. Read
owner's manual carefully. Learn its applications and limitations as well as the specific
potential hazards related to this tool.
•
DRESS PROPERLY. Do not wear loose
clothing or jewelry. They can be caught in
moving parts. Use of sturdy gloves and
moving. Make sure the trimmer is
unplugged and the switch is off when
clearing jammed material from blades.
Do not grasp the exposed cutting blades
or cutting edges of trimmer.
•
3
_k
CAUTION'. Blades will coast after
trimmer is turned off.
RULES
FOR SAFE OPERATION
(Continued)
MAINTAIN TRIMMER WITH CARE. Keep
cutting edge sharp and clean for best
performance and to reduce the risk of injury.
Follow instructions for lubricating and
changing accessories. Inspect hedge
trimmer cord periodically, and if damaged.
have it repaired by an authorized service
_1= WARNING: Avoid dangerous
environment and guard against electric
shock hazard. Don't use trimmer in rain,
in damp or wet locations, or on wet
hedges and shrubbery. Use only
extension cords in good condition and
marked "suitable for use with outdoor
appliances" having electrical rating not
less than rating of trimmer. Do not use
damaged extension cords. Inspect cords
periodically and replace if damaged. Do
not abuse cord. Never carry trimmer by
cord. Do not yank cord to disconnect
from receptacles. Keep cord away from
heat, oil, sharp edges, and moving
blades.
facility. Inspect extension cord periodically
and replace if damaged. Keep handles dry,
clean, and free from oil and grease.
STORE TRIMMER
use, store trimmer indoors in a dry place
where not accessible to children.
CHECK DAMAGED
II
PARTS. Before futher
WHEN OPERATING YOUR TRIMMER keep extension cord behind trimmer.
Never drape it over hedge being trimmed.
use of the hedge trimmer, a guard or other
part that is damaged should be carefully
checked to determine that it will operate
properly and perform its intended function.
Check for alignment of moving parts, binding of moving parts, breakage of parts,
mounting, and any other condition that may
affect its operation. A guard or other part
that is damaged should be properly repairec
or replaced by an authorized service center
unless indicated elsewhere in this manual.
KEEP CHILDREN AWAY, Do not permit
children to contact trimmer or extension
cord. Keep children a safe distance from
work area.
DO NOT ATTEMPT TO REPAIR TRIMMER. For service or repair return the trimmer to your nearest Sears store. See that
only identical replacement parts are used.
USE TRIMMER PROPERLY, Use only for
trimming the type of shrub, growth, etc,
described in the operating instructions, Do
not abuse trimmer
KEEP WORK AREA CLEAN. Cluttered
areas and benches invite accidents.
_L WARNING: To reduce the risk of electric
shock, use only with an extension cord
intended for outdoor use, such as SW-A,
SOW-A, STW-A, STOW-A, SJW-A,
SJOW-A, SJTW-A or SJTOW-A.
R
INDOORS. When not in
DON'T FORCE HEDGE TRIMMER.
WARNING: Do not use without front
handle in place. Keep both hands on
handles when tool is on.
It will
do the job better and with less likelihood of
a risk of injury at the rate for which it was
designed.
•
WEAR HEARING PROTECTION DURING
EXTENDED PERIODS OF OPERATION.
DON'T OVERREACH
•
NEVER USE IN AN EXPLOSIVE ATMO-
OR STAND ON
UNSTABLE SUPPORT. Keep good footing
and balance at all times Do not use on
ladder.
AVOID UNINTENTIONAL
STARTING
OF
TRIMMER. Before plugging in trimmer, be
sure trimmer switch is off. Don't carry
trimmer with finger on switch.
DISCONNECT (UNPLUG) TRIMMER
FROM POWER SUPPLY. Disconnect
the
hedge trimmer from power supply when not
in use, before servicing, when changing
accessories such as blades, when cleaning,
and the like,
SPHERE. Normal sparking of the motor
could ignite fumes.
•
WHEN SERVICING USE ONLY IDENTICAL CRAFTSMAN REPLACEMENT
PARTS.
GROUND FAULT CIRCUIT INTERRUPTER (GFCI) PROTECTION SHOULD
BE PROVIDED ON THE CIRCUIT(S) OR
OUTLET(S) TO BE USED FOR YOUR
HEDGE TRIMMER. Receptacles are available having built-in GFCI protection and
may be used for this measure of safety.
RULESFORSAFEOPERATION(Continued)
EXTENSION CORDS. The use of any
extension cord will cause some loss of
_,
power. To keep the loss to a minimum and
to prevent tool overheating, be sure to use
an extension cord heavy enough to carry
the current your product will draw. For
lengths less than 100 feet, No. 16 A.W.G.
extension cords should be used. Follow the
recommended cord sizes on the following
POLARIZED
Extension Cord Length Wire Size A.W.G.
18
50 Feet
16
100 Feet
16
150 Feet
14
PLUGS. To reduce the risk of
electric shock, this appliance has a polarized plug (one blade is wider than the other)
and will require the use of a polarized
extension cord. The appliance plug will fit
into a polarized extension cord only one
way. If the plug does not fit fully into the
extension cord, reverse the plug. If the plug
still does not fit, obtain a correct polarized
extension cord. A polarized extension cord
will require the use of a polarized wall
outlet. This plug will fit into the polarized
wall outlet only one way. If the plug does
not fit fully into the wall outlet, reverse the
plug. If the plug still does not fit, contact a
qualified electrician to install the proper wall
outlet. Do not change the equipment plug,
extension cord receptacle, or extension
cord plug in any way.
chart when using extension cords. If in
doubt, use the next heavier gage. The
smaller the gage number the heavier the
cord. For tools rated 6 amps or less:
25 Feet
WARNING: Check extension cords before
each use. If damaged, replace immediately.
Never use tool with a damaged cord since
touching the damaged area could cause
qlectrical shock resulting in serious injury.
To reduce the risk of disconnection of hedge
trimmer from the extension cord during
operation:
(1) Use the extension cord retainer as shown
in Figure 5, or
SAVE THESE INSTRUCTIONS.
(2) Make a knot as shown in Figure 6.
Refer to
them frequently and use them to instruct
others who may use this tool. If you loan
someone this tool, loan them these instructions.
WARNING:
The operation of any hedge trimmer can result in foreign objects being thrown into your
eyes, which can result in severe eye damage. Before beginning power tool operation,
always wear safety goggles or safety glasses with side shields and a full face shield when
needed. We recommend Wide Vision Safety Mask for use over eyeglasses or standard
safety glasses with side shields, available at Sears Retail Stores.
SAVE THESE INSTRUCTIONS
_i,
WARNING:
Your hedge trimmer should never be plugged in while you are assembling parts or making
adjustments. Always wear safety goggles or safety glasses with side shields and a full face shield if needed
when operating your hedge trimmer,
5
INSTALLING FRONT HANDLE
See Figures 1 and 2.
_,
After removingyour hedge trimmer from its carton,
remove the front handle, screw, and lock nut from the
plastic bag. Using a flat blade screwdriver,which is
the only tool needed for assembly, install as follows:
• Orient front handle so that the side with the molded
slot for lock nut will be located on the left side of
your hedge trimmer. See Figure I.
Place the front handle parallel to the blade guard of
your hedge trimmer, then fit the ears of the front
handle intothe handle slots on the motor housing.
•
FRONT
HANDLE
WARNING: Before connectingyour hedge
trimmerto power supplysource, always check tc
be sure it is not in lock-on position(depress and
release the switch trigger). Failure to do so coulc
result in accidental starting of your trimmer
resultingin possibleserious injury. Also, do not
lock the triggeron jobs where your trimmer may
need to be stopped suddenly.
SWITCH
See Figure 3.
Your hedge trimmer is equipped with a LOCK-OFF
BUTTON, that reduces the possibilityof accidental
starting.
BLADEGUARD
LOCK-OFF
BUTTON
REAR
HANDLE
LOCK
NUT
HANDLE
SLOT
SCREW
KEYEDEAR
Fig. 1
Note: For your convenience and ease of assembly
one of the ears on front handle has been keyed.
•
Place your trimmer on a workbench and insert lock
nut into molded slot on left side of front handle.
See Figure 2.
Fig.
TO TURN YOUR HEDGE TRIMMER ON
PLACELOCKNUT
IN MOLDEDSLOT
•
Slide the lock-off buttonforward (1).
•
Depress and hold the switchtrigger (2).
•
Release the lock-offbutton (3).
Note: The lock-offbutton is located on top of the
handle. The lock resets each time the switch
trigger is released.
LOCK-ON FEATURE
See Figure 4.
SCREW
Your hedge trimmer is also equipped with a LOCKON feature, which is convenientwhen continuous
trimmingfor extended periods of time is required.
Fig. 2
•
Insert screw from right to left through the front
handle and motor housing. See the arrow shown in
Figure 2.
•
Tighten
driver.
screw securely with a flat blade screw-
6
ALTERNATE
METHODFOR
SECURING
EXTENSION
CORDS
LOCK-ON
TAB
EXTENSION
CORD
LOCK_FF
BU'l'rON
\
Fig. 6
IGGER
Extension cord retainer works best with 16 A.W.G.
extension cords. When using 18 A.W.G. extension
cords the cord may be lOOsein extension cord retainer. When using 14 A.W.G. extension cords the
cord may be tight in extension cord retainer.We
suggestan alternate method as shown in figure 6 for
securingloose or tight extension cords.
Fig. 4
TO LOCK-ON
• Slide the lock-off button forward (1).
• Depress and hold the switch trigger (2).
• Release the lock-offbutton (3).
• Pull lock-on tab back with your thumb and hold (4).
,_
• Release switch tdgger (5), then release lock-on
tab.
TO RELEASE THE LOCK
• Depress the switch trigger and release it.
PREPARING
If you have the lock-on feature engaged during use
and your hedge trimmer becomes disconnectedfrom
power supply,disengage the lock-on feature immediately.
EXTENSION
WARNING: If any parts are missing, damaged,
or broken, do not operate your trimmeruntil they
have been replaced. Failure to do so could result
in possiblesedous personal injury.
FOR OPERATION
For ease of operation your hedge trimmer has both a
front handle and a rear handle. See Figure 7.
BLADE GUARD
CORD RETAINER
See Figure5.
An extensioncord retainer has been provided to
prevent extensioncord from becoming disconnected
from your trimmerduring use. It is molded into the
switch handle of your hedge tdmmer. Plug extension
cord into plug recess below switch handle, then
snugly fit cord into retainer as shown in Figure 5.
BLADE
FRONTHANDLE
SWITCH
REARHANDLE
EXTENSION
CORDRETAINER
Fig. 7
_1, WARNING: Check the front handle before each
use. Make sure it is securely fastened to your
hedge trimmer before using.
16 A.W.G.
EXTENSION
CORD
For your protection there is a blade guard between
the front handle and the blade,
_
CAUTION: Do not operate if blade guard
becomes broken or damaged.
Fig. 5
When using your hedge trimmer hold it with both
hands as shown in Figure 7.
7
,_
CAUTION: Do not use blade guard as a
gripping surface.
_k
WARNING: Stay alert and watch what you are
doing. Do not operate trimmer when fatigued.
TRIMMING A HEDGE
See Figures 8 and 9.
Wear gloves when trimmingthorny or pricklygrowth,
When trimmingnew growth,use a wide, sweeping
action so that the stems are fed directly into the cutter
blade. Older growthwill have thickerstems and will b(
trimmed easiest by using a sawingmovement. Do not
try to cut stems that are larger than 3/8 in. thickor
those obviouslytoo large to feed intothe cutter blade.
Use a non-poweredhand saw or pruning saw to cut
the larger stems.
Fig. 8
USE TRIMMER PROPERLY. Hold the hedge trimmer
with both hands and with the cutter blade away from
you BEFORE starting trimmer.
_k
WARNING: Keep hands and fingers away from
moving parts. Any part of bodycoming in contact
with moving parts could resultin sedous injury.
_1, WARNING: To prevent possibleserious injury
from accidental starting, disconnectyourtrimme(
from power supply and carry by the front handle
when not in use.
Always keep cord behind your hedge trimmerwhen in
use. Do not place it over the hedge where it may be
cut by the blade.
GUARD AGAINST ELECTRIC SHOCK
HAZARD
_1, WARNING: Cord coming in contact with a
moving blade could result in damaged cord.
Replace a damaged cord immediately. Never
use tool with a damaged cord since touchingthe
damaged area could cause electricelshock
resulting in serious injury.
_.
DANGER: If blade jams on the extension cord,
DO NOT TOUCH THE BLADE! IT CAN BECOME ELECTRICALLY LIVE AND VERY
DANGEROUS. Continue to hold your trimmerby
the insulated handles and immediately unplug
extension cord from power supply.
If desired, you can use a string to help cut your hedge
level. Decide how high you want the hedge. Then,
stretch a piece of string along the hedge at this height.
Trim the hedge just above this guide line of string.
See Figure 8. Trim the side of a hedge so that it will
be slightly narrower at the top as shown in Figure 9.
More of the hedge will be exposed when shaped this
way and its growth will be more uniform.
•
Don't use trimmer In'rain, In damp or wet
locations, or on wet I_edgesand shrubbery.
•
Use only extension cords in good condition
and marked "suitable for use with outdoor
appliances" having electrical rating not less
than rating of trimmer.
•
Do not use damaged extension cords.
•
•
Inspect cords periodically and replace If
damaged.
Do not abuse cord.
•
Never carry trimmer by cord.
•
Do not yank cord to disconnect from
receptacles.
•
Keep cord away from heat, o11,sharp edges,
and moving blades.
• Wear nonskid footwear.
8
_i,
WARNING: When servicinguse only identical
Craftsman replacement parts. Use of any other
parts may create a hazard or cause product
damage.
SHARPENING THE CUTTER BLADE
See Figure 10.
•
Allow your hedge trimmer to come to a stop with
the cutter blade and guard positionedas shown in
Figure 10. This will allow clearance for the file
between cutter teeth and guard teeth.
CUTLERBLADE
BLADE LUBRICATION
See Figure 11.
Disconnect hedge trimmer from power supply.
For easier operation and longer blade life, lubricate
the hedge trimmer blade before and after each use.
Before lubricating,be sure the switch is in the OFF
positionand the tool is disconnectedfrom the power
supply.Apply light machine Oilalong the edge of the
top strap as shown in Figure 11.
Your trimmer should be stopped, disconnected,and
oiled occasionally during use,
GUARD
OILCAN
TOP BLADE
STRAP
Fig. 10
•
Disconnect
•
Clamp the blade assembly in a vise and file the
exposed cutting sudace of each blade tooth with
an 8 inch smooth round file, 1/4 in. or 7/32 in,
diameter. Be sure to retain the original angle of
tooth when filing.
Avoid using solvents when cleaning plasticparts.
Most plasticsare susceptibleto damage from various
types of commercial solvents and m_y be damaged
by their use. Use clean clothsto remove dirt, carbon
dust, etc.
•
Remove the hedge trimmer from the vise, restart it,
and stop it so that the unsharpened edges of the
blade teeth are exposed.
_
•
Hedge Trimmer from power supply.
Fig. 11
Disconnect the tool and repeat the sharpening
procedure as described above,
GENERAL
WARNING:
Do not at any time let brake fluids,
gasoline, petroleum-based products, penetrating
oils, etc. come in contact with plastic parts. They
contain chemicals that can damage, weaken, or
destroy plastic.
LUBRICATION
All of the bearingsin this tool are lubricatedwith a
sufficientamount of high grade lubricantfor the life of
the unit under normal operating conditions.Therefore,
no further lubricationis required.
Only the parts shown on parts list, page 13, are
intendedto be repaired or replaced by the customer.
All other parts represent an importantpart of the
double insulationsystem and shouldbe serviced only
by a qualified Sears service technician.
BLADE
REPLACEMENT
Disconnect
•
hedge trimmer
• Remove grease cover and blade assembly.
• Make sure drive washer remains installed on d
pin.
from power supply.
Remove blade cover screw. See Figure 12,
• Align slot in new blade assembly and grease c
with drive washer on gear assembly. See Figu
14.
PUSHFORWARD
ANDLIFTTO REMOVE
BLADE
ASSEMBLY
St.(
BLADECOVER
BLADE
ASSEMBLY
O
ASSEMBLY
GEAR
BLADE
COVERSCREW
Fig. 12
•
Remove blade cover: To remove, push blade cover
forward and lift from hedge trimmer.
•
Remove blade screws.
WASHER
See Figure 13.
Note: A 5/16 in. socket or nut driver is required to
remove blade screws.
• After aligning, continueto hold blade assembly
place, then manually slide blade assembly back
and forth until screw holes in grease cover align
with screw holes in gear housing. See Figure 1A.
BLADE
COVER
BLADE
SCREWS
CAREFULLY
SLIDEBLADEASSEMBLY
TOALIGN
SCREWHOLES--BLADESARESHARP
BLADE
ASSEMBLY
GEAR
HOUSING GREASE
COVER
SCRE'
HOLE
?
BLADE
ASSEMBLY
O
BLADE
COVER
SCREW
Fig. 13
Fig.
10
BLADE
REPLACEMENT
(Continued)
•
WARNING: Blades are sharp. When manually
sliding blade assembly, do not place your hand
or fingers between blades or in any position
where they could get pinchedor cut,
•
•
Replace blade cover. Place rear tab inside housing, align front tabs with slots in housing,then slide
blade cover back intoits correct position.Sea
Figure 17.
BLADECOVER
Replace blade screws. Tighten screws securely.
FRONTTABS
Replace blade cover screw. See Figure 16.
Note: Do net tighten until blade cover has been
replaced.
BLADECOVER
REARTAB
BLADE
SUDEBLADECOVER
BACKINTOPosmoN
BLADE
SCREWS
Fig. 17
• Tighten blade cover screw securely.
Fig. 16
_1= WARNING: Make sure blade cover is replaced
before connectingyour hedge trimmerto power
supply. Failureto do so will expose internalparts
whichcould cause an accident or electrical
shock resuttingin serious injury,
Note: If binding occursafter replacing blade
assembly, repeat the stepsabove for reassembly.
11
CRAFTSMAN 20 in. HEDGE TRIMMER - MODEL NUMBER 315.798890
SEE NOTE "A" PAGE 13
2
4
14
13
9
I
11
I
i
12
10
CRAFTSMAN
20 in. HEDGE
TRIMMER
- MODEL
NUMBER
315.798890
I
I
I
number
in all
correspondence
HEDGE
or when
ordering
repairtheparts.
The model
number
will be found regarding
on a plate your
attached
to theTRIMMER
motor housing.
Always
mention
model
SEE BACK
PAGE
FOR PARTS
ORDERING
|
INSTRUCTIONS
PARTS LIST
Key
No.
Pa_
Number
1
703477-057
Lock Nut (#1/4-20) ...................................................................
1
2
980448-002
Front Handle ............................................................................
1
3
980458-001
Logo Plate ................................................................................
1
4
999306-025
5
980456-001
Data Plate ................................................................................
1
6
617900-002
Blade Seal ...............................................................................
1
7
990762-001
Washer
1
8
967818-002
Gear Assembly
9
662961-012
20 in. Blade Assembly
10
990427-001
11
967876-008
Blade Cover .............................................................................
1
12
930517-073
Screw (#1/4-20 x 4-1/4 in. Rd. Hd.) ........................................
1
13
990460-001
Grease Cover ..........................................................................
1
14
967506-001
Drive Washer ...........................................................................
1
972000-600
Owner's Manual
Description
Quan.
* Screw (#8-19 x 2-3/4 in. Pan Hd, T, F.) ..................................
....................................................................................
• Screw (#10-32
........................................................................
.............................................................
x 5/8 in. Washer
Hd. T. F.) ..............................
1
1
1
4
NOTE: "A" - The assembly shown represents an important part of the Double Insulated System. To
avoid the possibility of alteration or damage to the System, service should be performed by
your nearest Sears Repair Center. Contact your nearest Sears Retail Store for Service Center
information.
* Standard
Hardware
Item - May Be Purchased
13
Locally
For in-home
major brand repair service:
Call 24 hours a day, 7 days a week
1-800-4-MY-HOME s. (1-800-469-4663)
Para pedir servicio de reparacibn
a domicilio
- 1-800-676-5811
In Canada for all your service and parts needs call
- 1-800-665-4455
Au Canada pour tout le service ou les pi_ces
For the repair or replacement
parts you need:
Call 6 am - 11 pm CST, 7 days a week
PartsDirects.
1-800-366-PART
Para ordenar
(1-800-366-7278)
piezas con entrega a domicilio
- 1-800-659-7084
For the location of a Sears Parts and Repair Center
in your area:
Call 24 hours a day, 7 days a week
1-800-488-1222
For information on purchasing a Sears Maintenance Agreement
or to inquire about an existing Agreement:
Call 9 am - 5 pm, Monday - Saturday
1-800-827-6655
The Service Side of Sears