Operating instructions | Craftsman 580.753 Pressure Washer User Manual

User Instructions
TRACTOR LIFT
Model Number 610.24600
•
Provides access to mower deck for easy
cleaning and service
•
Fits all 1985 through current models
of CRAFTSMAN front engine tractors
and Zero Turn Mowers
•
Can be fitted to most major front engine tractor brands
•
Adjustable arms for greater versatility
•
Extra heavy duty gauge steel construction
•
If you read and follow these instructions, this product can be
assembled in approximately 20 minutes
•
Assemble unit on cardboard to avoid scratches or damage to parts
•
Can easily be assembled by one person
•
All fasteners for this Tractor Lift can be purchased at Sears or any
hardware store
Patent Pending
•
If there are any missing
parts, or if you have any
questions on assembly,
operation, maintenance
or safety, please call
1-800-652-6231
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
Visit our Craftsman website: www.sears.com/craftsman
610.24600-REV B 3/08
SAFETY INSTRUCTIONS
WARNINGS
• Always use the stabilizer bar provided when using tractor lift.
Make sure stabilizer bar is properly in place before starting any
work on tractor.
• Read and understand all safety and operating instructions
before using the tractor lift. Never allow anyone unfamiliar
with these instructions to use the tractor lift.
• Be sure to read and follow all safety instructions and
warnings. Failure to follow these instructions may result in
damage to the product and/or serious personal injury.
• Danger of serious personal injury exists. Serious personal
injury can occur when using a lifting device.
• Never attempt to ride any vehicle up or down the tractor lift.
• Read and understand all safety and operating instructions
provided by the tractor's manufacturer before using tractor lift.
• Do not climb onto tractor while tractor is in the elevated position.
• Never lay under the tractor or mowing deck.
• When working on the front of the tractor always place wheel
chocks in back of the rear wheels/tires.
• When using lift, keep all bystanders, including children, away.
• This tractor lift must be only used for lifting and lowering to
and from a level and stable surface.
• Never use in wet conditions.
• Do not attempt to lift the front and back of the tractor at the same
time.
• Do not use tractor lift as an automotive lift, or for any other use for
which it is not intended or designed.
• If tractor lift is bowing while lifting or lowering your tractor, which
indicates an overload condition, remove the tractor immediately.
• Do not attempt to lift or lower any power equipment while motor is
running.
• Never engage blades while using tractor lift.
• Always disconnect spark plug wire from tractor before beginning
any work on tractor.
• Do not exceed the rated capacity of the tractor lift - 270#.
• Always raise and lower tractor lift in a controlled fashion; do not
allow the tractor to drop too quickly, damage could occur.
• Make sure lifting arms are aligned and set to the proper distance apart
so that the equipment being loaded is well balanced on the lift.
• Do not remove warning decals from product.
• Before each use, always check for any worn, loose, or
damaged parts on the tractor lift. If any damage is present,
DO NOT USE THE TRACTOR LIFT.
• Periodically check the fasteners to make sure they are still
tight and in place.
• Keep lift surface clean by occasionally cleaning with water and
any mild detergent.
• Do not add to or try to modify the tractor lift in any way.
Any modifications will void any warranties.
• Failure to abide by the warnings and read the safety instructions may
result in loss of load, damage to lift and/or property, serious personal
and/or fatal injury.
• Failure to follow these warnings may result in property
damage and/or serious bodily injury.
FOR MISSING PARTS, Call 1-800-652-2321, Monday - Friday, 8 a.m. - 5 p.m. E.S.T.
Page 2.
Carton Contents
8
3
11
4
6
2
1
7R
REF NO
1
2
3
4
6
QTY
1
1
1
2
1
10
7L
PART NUMBER
51001
51002
51003
41009
51005
DESCRIPTION
Angle Frame Assembly
Handle Top
Handle Bottom
Lift Tube Assembly
Lift Cross Tube
OPERATION
REF NO
7L
7R
8
10
11
QTY
1
1
1
1
1
PART NUMBER
410131
410132
51006
310031
310041
DESCRIPTION
Tractor Mounting Bar - Left
Tractor Mounting Bar - Right
Stabilizer Bar
Hardware Bag
Assembly Manual
MAINTENANCE
Tractor Lift can be used out of the box on all Craftsman tractors
with bumpers or brush guards. Tractor Lift mounting hardware is
provided if your tractor does not have a bumper or brush guard.
Store unit in a clean dry place.
TOOLS REQUIRED FOR ASSEMBLY
Before each use:
•
Always check tire pressure.
•
Always inspect unit for damage.
•
Always check fasteners for tightness.
9/16" Wrench and/or Socket
Adjustable wrench
Recommended tire pressure - 30 PSI.
FOR MISSING PARTS, Call 1-800-652-2321, Monday - Friday, 8 a.m. - 5 p.m. E.S.T.
Page 3.
Hardware Contents
34
38
37
35
29
23
27
39
33
26
36
25
22
24
FOR MISSING PARTS, Call 1-800-652-2321, Monday - Friday, 8 a.m. - 5 p.m. E.S.T.
Page 4.
28
Setting up Lift Mounting Hardware - Tractor Front
Tractor Lift can be used out of the box on all Craftsman tractors with bumpers or brush guards. Tractor Lift mounting hardware is provided. If
your tractor does not have a bumper or brush guard, follow the steps below:
Note: Left and Right sides are determined by standing behind tractor looking forward.
7R
24
29
27
7L
26
6
"X"
Step 1.
Remove,
add washer ( 24 ),
replace.
Step 1.
•
Remove existing bolt "X" and set aside. If tractor does not have
this bolt use supplied 3/8" x 1-1/4" bolt with 3/8 nylok nut.
•
Align holes in tractor mounting bars ( 7R & 7L ) to the front
left & right side frame holes of the tractor.
•
Insert hex head bolt ( 29 ) through inside front hole of frame,
through tractor mounting bar and secure with nylock nut ( 27 ).
•
Add flat washer ( 24 ) under head of bolt removed in earlier
step and reinsert through tractor mounting bar and tighten.
•
For LT1000 & LT2000 series tractors, use self-thread bolts
( 28 ) in place of bolt ( 29 ) and nut ( 27 ).
26
38
Step 2.
Step 2.
•
Push tube plugs ( 38 ) into each end of lift tube ( 6 ).
•
Slide lift tube through cut-out in tractor mounting bars and
center.
•
Pin lift tube in place with one hair pin cotter ( 26 ) on each side
of mounting bar.
Note: The mounting bars have been manufactured to attach to the
frames of most major front engine tractor brands. Additional
hardware has been included for attachment to non-Craftsman
brands.
FOR MISSING PARTS, Call 1-800-652-2321, Monday - Friday, 8 a.m. - 5 p.m. E.S.T.
Page 5.
Assemble Tractor Lift
Attach Lift Tubes to Angle Frame
•
Lift tubes come pre-assembled. Attach lift tube assemblies ( 4 ) to angle frame ( 1 ) using bolts ( 22 ), flat washers ( 24 ), split lock washers ( 23 )
and hex nuts ( 25 ).
•
Secure rear of lift tube assembly ( 4 ) to angle frame ( 1 ) using bolts ( 29 ), flat washers ( 24 ), split lock washers ( 23 ) and hex
nuts ( 25 ).
Note: Over-tightening receiver bolts ( 22 ) could cause damage to lift tubes ( 4 ).
Determining the width between lift tubes.
1
Front of Craftsman Tractors
29
Front of Craftsman Zero Turn
24
Brush guard bumper
(can also be used for
front of Craftsman tractor)
Push mower
25
23
22
DCB A
A BCD
24
23
4
5
Note: The higher the lift tube extensions (5)
are positioned, the harder the tractor will be to lift.
25
Settings:
A. Push Mower
B. Brush guard / Bumper installed
C. Front of Craftsman Tractor
D. Front of Craftsman Zero Turn
FOR MISSING PARTS, Call 1-800-652-2321, Monday - Friday, 8 a.m. - 5 p.m. E.S.T.
Page 6.
Assemble Tractor Lift
Attach Handle to Angle Frame
Step 1.
Attach handle bottom ( 3 ) to angle frame ( 1 ) using hex bolt ( 22 ),
flat washer ( 24 ), split lock washer ( 23 ) and hex nut (25 ).
Step 2.
Insert ring grip pin ( 30 ), as shown.
Step 3.
Insert handle top ( 2 ) into handle bottom ( 3 ). Secure with hex
bolt ( 33 ), flat washer ( 24 ), split lock washer ( 23 ) and hex nut (25 ).
Step 4.
Place handle grips ( 37 ) onto handle top tube ( 2 ). A little
soapy water will help grip slide onto tube easily.
22
24
25
23
IF HANDLE CANNOT BE
EASILY INSERTED, FLIP
HANDLE OVER AND
REINSERT.
38
25
37
30
23
3
30
2
24
33
Handle Top Tube
39
Peel off scuff pad (39)
backing and adhere to
back of handle.
37
FOR MISSING PARTS, Call 1-800-652-2321, Monday - Friday, 8 a.m. - 5 p.m. E.S.T.
Page 7.
38
Foot Bar Tube
1
Assemble Tractor Lift
Attach Stabilizer Bar
Step 1. Slide stabilizer bar ( 8 ) onto foot bar tube as shown.
Step 2. Press snap button and slide stabilizer bar against handle.
Step 3. Insert ring grip pin ( 30 ) through stabilizer bar and handle top.
Foot bar tube
Snap button
8
30
FOR MISSING PARTS, Call 1-800-652-2321, Monday - Friday, 8 a.m. - 5 p.m. E.S.T.
Page 8.
OPERATION
Using the Tractor Lift
Step 3. Engaging Stabilizer Bar
Stabilizer bar MUST be engaged immediately after raising the tractor.
WARNING: Failure to engage stabilizer bar may result in serious personal
injury and or property damage.
•
Remove ring grip pin ( 30 ) from tube handle. Press snap button
and slide stabilizer bar ( 8 ) from foot bar tube.
•
Turn stabilizer bar 180 degrees as shown at bottom of Figure 1.
•
Position stabilizer bar under base of unit between wheels.
•
Slide stabilizer bar back onto foot bar tube making sure the bar is
positioned back over snap button.
Tube Handle
Snap Button
Turn 180
30
Figure 1
Snap Button
8
Figure 2
FOR MISSING PARTS, Call 1-800-652-2321, Monday - Friday, 8 a.m. - 5 p.m. E.S.T.
Page 10.
Repair Parts List
2
MODEL NUMBER - 610.24600
37
37
33
23
24
Peel off
backing,
adhere to
handle.
25
8
39
38
3
40
38
9
23 1
30
22
23
30
4
26 5
38
25
4
30
5
7L
7R
29
20
24
22
6
35
25
25
24
23
9
38
36
34
FOR MISSING PARTS, Call 1-800-652-2321, Monday - Friday, 8 a.m. - 5 p.m. E.S.T.
Page 11.
21
26
20
CRAFTSMAN THREE YEAR LIMITED WARRANTY
If this Craftsman product fails due to a manufacturer's defect within three years from the date of purchase, return it to
any Sears store or other Craftsman outlet in the United States for free replacement.
This warranty does not include wearing off or fading of product paint, nor replacement of product wheels or tires.
This warranty is void if this product is ever used for commercial or rental purposes.
This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state.
Sears, Roebuck and Co., Hoffman Estates, IL 60179.
PRODUCT RECORD
In the space below record the model number and
purchase date of your cart. The model number can
be found on the front cover of the user guide.
Model Number___________________________.
Purchase Date___________________________.
Keep this booklet and your Sears receipt in a safe
place for future reference.
NOTES
ORDERING INFORMATION
After the one year warranty period all parts may
be ordered by calling Sears Service at
1-800-4MY-HOME (1-800-469-4663).
When ordering repair parts, always give the
following information:
•
•
•
•
Product - ___________________________.
Model Number - _____________________.
Part Number - *_____________________.
Part Description - *___________________.
*Found on the repair part list. Reference page 11.
Get it fixed, at your home or ours!
Your Home
For expert troubleshooting and home solutions advice:
www.managemyhome.com
For repair – in your home – of all major brand appliances,
lawn and garden equipment, or heating and cooling systems,
no matter who made it, no matter who sold it!
For the replacement parts, accessories and
owner’s manuals that you need to do-it-yourself.
For Sears professional installation of home appliances
and items like garage door openers and water heaters.
1-800-4-MY-HOME®
(1-800-469-4663)
Call anytime, day or night (U.S.A. and Canada)
www.sears.com
www.sears.ca
Our Home
For repair of carry-in items like vacuums, lawn equipment,
and electronics, call anytime for the location of your nearest
Sears Parts & Repair Service Center
1-800-488-1222 (U.S.A.)
www.sears.com
1-800-469-4663 (Canada)
www.sears.ca
To purchase a protection agreement on a product serviced by Sears:
1-800-827-6655 (U.S.A.)
1-800-361-6665 (Canada)
Para pedir servicio de reparación
a domicilio, y para ordenar piezas:
Au Canada pour service en français:
1-888-SU-HOGAR®
1-800-LE-FOYER MC
(1-888-784-6427)
® Registered Trademark / TM Trademark / SM Service Mark of Sears Brands, LLC
® Marca Registrada / TM Marca de Fábrica / SM Marca de Servicio de Sears Brands, LLC
MC
Marque de commerce / MD Marque déposée de Sears Brands, LLC
(1-800-533-6937)
www.sears.ca
© Sears Brands, LLC
Download PDF

advertising