Craftsman 917.27339 Lawn Mower User Manual

ModeJ Number_
Changing Entertainment. Again.
www.rca,com
Part No.: RNO340E0100
CAUTION
Caution: To reduce the risk of electric
shock, do not remove cover or back. No user-serviceable
parts inside.
Refer servicing to qualified service personnel.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.
CAUTION: CHANGES OR MODIFICATIONS
NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR
COMPLIANCE WITH THE FCC RULES COULD AVOID THE USERS AUTHORITY TO OPERATE THIS
EQUIPMENT.
FCC Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio Communications. However, there is no Guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
-
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
1.
2.
3.
4.
5.
Readtheseinstructions.
Keeptheseinstructions.
Heedallwarnings.
Followallinstructions.
Donotusethisapparatus
nearwater.Forexample,
donotuseneara laundry
tub,ina wetbasement,
or neara swimming
pool,andthelike.
6. Cleanonlywithdrycloth.
7. Donotblockanyventilation
openings.
Installinaccordance
withthemanufacturer's
instructions.
Slotsandopenings
in
thecabinetbackorbottomareprovided
forventilation,
toensurereliableoperation
oftheTVandtoprotectitfrom
overheating.
Theseopenings
mustnotbeblockedorcovered.
Theopenings
shouldneverbeblockedbyplacingtheTV
ona bed,sofa,rug,or othersimilarsurface.
8. Donotinstallnearanyheatsourcessuchasradiators,
heatregisters,
stoves,or otherapparatus
(including
amplifiers)
that
produceheat.
9. Donotdefeatthesafetypurposeofthepolarized
or grounding-type
plug.A polarized
plughastwobladeswithonwider
thantheother.A grounding-type
plughastwobladesanda thirdgrounding
prong.Thewidebladeor thethirdprongis
provided
foryoursafety.Iftheprovidedplugdoesnotfit intoyouroutlet,consultanelectrician
forreplacement
ofthe
obsoleteoutlet.
10.Protectthepowercordfrombeingwalkedonor pinchedparticularly
atplugs,convenience
receptacles,
andthepoint
wheretheyexitfromtheapparatus.
11.Onlyuseattachments/accessories
specified
bythemanufacturer.
12.Useonlywithcart,stand,tripod,bracket,or tablespecified
bythemanufacturer,
orsoldwiththe
apparatus.
Whena cartis used,usecautionwhenmovingthecart/apparatus
combination
to
avoidinjuryfromtip-over.ATVandcartcombination
shouldbemovedwithcare.Quickstops,
excessive
force,andunevensurfaces
maycausetheTVandcartcombination
tooverturn.
13.Unplug
thisapparatus
duringlightning
stormsor whenunusedforlongperiodsoftime.Foraddedprotection
forthisTV
receiver
duringa lightningstorm,orwhenit isleftunusedforlongperiodsoftime,unplugitfromthewalloutletand
disconnect
antennaorcablesystem.ThiswillpreventdamagetotheTVdueto lightning
andpowerlinesurges.
14.Referallservicing
to qualified
servicepersonnel.
Servicing
isrequired
whentheapparatus
hasbeendamaged
inanyway,
suchaspower-supply
cordor plugisdamaged,
liquidhasbeenspilledorobjectshavefallenintotheapparatus,
the
appratushasbeenexposedto rainor moisture,
doesnotoperatenormally,
or hasbeendropped.
15.ThisTVshouldbeoperated
onlyfromthetypeofpowersupplyindicated
ontheratinglabel.Ifcustomer
is notsurethe
typeof powersupplyinyourhome,consultyourappliance
dealeror localpowercompany.
ForTVremotecontrolbattery
power,referto theoperating
instructions.
16.TheTVsetshallnotbeexposedtodrippingor splashing.
Noobjectsfilledwithliquids,suchasvases,shallbeplacedon
theTVset.
17.NeverpushobjectsofanykindintothisTVthroughopeningsastheymaytouchdangerous
voltageor otherelectrical
partsthatcouldresultinfireor electricshock.NeverspillliquidofanykindintotheTV.
18.Unplug
theTVfromthewalloutletbeforecleaning.
Donotuseliquidor aerocleaners.
Usea dampclothforcleaning.
19.ThisTVshouldneverbeplacednearorovera radiatoror heatresource.
ThisTVshouldnotbeplacedina built-in
installation
suchasa bookcase
or rackunlessproperventilation
isprovidedorthemanufacturer's
instructions
havebeen
adhered
to.
20.DonotplacethisTVonanunstable
cart,stand,tripod,bracket,or table.TheTVmayfall,causingseriousinjuryto
someone,
andseriousdamagetotheappliance.
21.DonotattempttoservicethisTVbyyourself
becauseopeningor removing
coversmayexposeyoutodangerous
high
voltageorotherhazards.
Referallservicing
to qualified
servicepersonnel.
22.Thisdevicecomplies
withPart15oftheFCCRules.Operation
issubjecttothefollowing
twoconditions:
(1)thisdevice
maynotcauseharmfulinterference,
and(2)thisdevicemustacceptanyinterference
received,
including
interference
thatmaycauseundesired
operation.
23.WARNING:
Topreventinjury,thisapparatus
mustbesecurely
attached
to thefloor/wallinaccordance
withthe
installation
instructions.
24.Toreducetheriskofelectricshock,thegrounding
ofcenterpinofplugmustbemaintained.
25.Ifanoutsideantennaorcablesystemisconnected
to theTV,besuretheantennaorcablesystemisgroundedtoprovide
someprotection
againstvoltagesurgesandbuilt-upstaticcharges.
Section810oftheNational
Electrical
Code,
ANSI/NFPA
NO.70,providesinformation
withrespectto propergrounding
ofthemastandsupporting
structure,
grounding
ofthelead-inwireto anantennadischarge
unit,sizeofgrounding
conductors,
locationofantenna
discharge
unit,connection
to grounding
electrodes,
andrequirements
forthegrounding
electrodes.
(SeeDiagram
FigureA.)
ANTENNA
LEAD tN
WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE
(NEC
SECTION
UNIT
810-20)
GROUNDING
CONDUCTORS
(NEC SECTION
810-21)
GROUND
ELECTRIC
EQUIPMENT
SERVICE
POWER
SERVICE
GROUNDING
ELECTRODE
SYSTEM
(NEC
ART
250,
PARTH)
Diagram
Safety
CLAMPS
Figure
A
Strap
Caution: Pushing, pulling or climbing on the TV may cause the TV falling. Do not let children climb or hang on the TV.
Always place the TV on a sturdy, level, sable surface that can hold the weight of TV. And if possible, secure the TV according
to the instruction below (Note: The fastening components such as screws are not supplied with TV).
Step one: Insert the M6 mounting screws into the upper two wall mounting screw holes and fasten them (Figure A).
Step two: Insert anchors to wall and connect the bolts and anchors with ropes or chains (Figure B).
Wall
M6 Screws
Figure
A
Figure
B
iii
Caution and Warning ....................................................................................................................................
FCC Notice ......................................................................................................................................................
i
i
Safety Precautions ....................................................................................................................................
ii, iii
Preparation for Your New TV ...................................................................................................................... 6
4
Check Accessories .............................................................................................................................................
6
Complete Customer Registration .........................................................................................................................
6
Setup TV Table Stand .........................................................................................................................................
6
Select TV Location .............................................................................................................................................
6
Connection and Using .........................................................................................................................................
6
TV Stand Installation
....................................................................................................................................
7
TV Signal Connection
..................................................................................................................................
Cable Connections .......................................................................................................................................
Back Panel Connections .............................................................................................................................
8
9
10
Connecting AV Composite Video device (Good Video Quality) ...............................................................................
I0
Connecting YPbPr Component device (Better Video Quality) .................................................................................
!I
Connecting HDMI device (Best Video Quality) ......................................................................................................
!2
Connecting a Computer ......................................................................................................................................
How to Obtain Various Kinds of Input Sources ......................................................................................................
13
13
TV Jacks Explanation ..................................................................................................................................
Side Keypad and Front Panel ...................................................................................................................
14
15
Side Panel Buttons .............................................................................................................................................
!5
Front Panel ........................................................................................................................................................
!5
Remote Control
16
Instructions
......................................................................................................................
Inserting Batteries in the Remote ........................................................................................................................
16
Remote Control Reception Angle ........................................................................................................................
!6
Learning about Remote Control
17
...............................................................................................................
Remote Control Buttons .....................................................................................................................................
!7
Initial Setup ....................................................................................................................................................
18
Menu Language .................................................................................................................................................
!8
Signal Type ........................................................................................................................................................
Auto Channel Search ..........................................................................................................................................
!8
!8
Basic Operations
19
..........................................................................................................................................
Turning On and Off .............................................................................................................................................
19
Choosing TV Channel .........................................................................................................................................
!9
Selecting input Source ........................................................................................................................................
19
Adjusting TV Stand Angle ....................................................................................................................................
Channel Bar ......................................................................................................................................................
19
20
Adjusting Volume ..............................................................................................................................................
20
EPG (Electronic Program Guide) ........................................................................................................................
20
OSD Menu Operations
.............................................................................................................................
21
Adjust the OSD Screen ....................................................................................................................................
21
Picture Menu ...................................................................................................................................................
21
Sound Menu ...................................................................................................................................................
23
Channel Menu .................................................................................................................................................
24
Parental Menu .................................................................................................................................................
25
Setup Menu ......................................................................................................................................................
29
Others Menu ...................................................................................................................................................
31
Frequently Asked Questions (FAQs) .....................................................................................................
Troubleshooting
.........................................................................................................................................
V-Chip Rating Explanations
....................................................................................................................
32
33
35
US V-Chip Rating System .................................................................................................................................
35
Canadian English Rating System .......................................................................................................................
35
Canadian French Rating System .......................................................................................................................
36
Universal Remote Control Code List .....................................................................................................
36
Wall Mounting
............................................................................................................
37
.................................................................................................................................
38
Product
Unit Specification
Specification
5
Before Turning On TV
Check Accessories
Check the accessories that are packed with your TV.
:| =i_[O]l i: [l[o] _i i :[o] I
r;V;V;| :_;_l I i = -'| I _
PART NO.: RE20QP28
riCH
SCREW
MACHINE
SCREW
TAPPING
USER'S GUIDE
=,,tkvjl_',_
tr±_
_1D]
Customer
REGISTRATION
CARD
REMOTE CONTROL
GUIDE
WARRANTY
CARD
r±_q ",Zeiv;J
=-'t[_e] -'1=]
CHILD SAFETY
CARD
Complete
QUICK START
GUIDE
Registration
Please fill the RCA registration Card and return it to the address printed on it. That is for your customer
customer warranty work, please read and fill it carefully.
service. To achieve best
Setup TV Table Stand
Please refer to TV Stand Installation guide in next page to carry out stand installing.
Select
TV Location
Select a flat, stable table to locate your TV set. Please follow the Safety Instructions
Connection
when locating the TV.
and Using
After placing your TV properly, you can connect the TV with power supply and cable components.
For further information,
see page
10 to page 13.
6
Note: Above accessoriesare subject to change without notice.
TV 40LA45RQ is packaged with the TV stand separated from the cabinet. To setup the TV table stand, please carry out the
installation according to the instructions below.
Step One
Place the TV faced down on a soft cloth or cushion to prevent the
LCD panel from being damaged.
The LCD panel is easy to scratch, so please:
1. Choose an absolutely flat surface to place the TV on.
2. Use soft cloth or cushion to face the TV panel.
Do not put TV on the table directly.
Always unplug the AC cord first when installing/removing
the stand.
Step Two
Put the stand body (plastic) onto the stand base in cabinet.
Align the six holes in TV stand body to the screwholes
stand base.
Step
in TV
Three
Insert the four M4 machine screws (in the upper four holes) and two
M4 tapping screws (in the lower two holes), then tighten them.
[
J
7
The first step in connecting
your TV is obtaining the signal. Your TV 40LA45RQ
and/or digital television channels via ANT/CABLE
Before connecting
your TV, determine
has a side panel, which allows you to receive analog
jack.
using an antenna or a cable service to obtain the signal.
A. Antenna
Connect
the antenna to TV via coaxial cable on ANT/CABLE
jack of the side panel. You are ready to receive air local digital and
analog channels.
B. Cable -rv service
Connect
the cable TV wall jack to TV via coaxial cable on ANT/CABLE
jack of the side panel. You are ready to receive off-air local
digital and analog channels.
C. Set-Top
Box
If you use a set-top box, you may need to call your cable company or satellite service provider, which use a special connection,
please refer to the user's guide of set-top box.
Note: Do not plug the AC cord until you have accomplished
all the connections.
Cable TV
Antenna
]
AC
110V/60Hz
AC Power Cord
(Connect after all the other connections
8
are done.)
Choose Your Connections
TV 40LA45RQ supports various of connecting ways from other devices (such as DVD, VCR, Set-top
table sheet to choose the cables which adapt to your device.
box, ect.). Please follow the
Go to page 10
AUDIO-IN
L and R, Video In
Video/Audio
cable
Audio Cable
Go to page 11
AUDIO-IN
L and R
COMPONENT
1 Y, Pb, Pr
COMPONENT
2 Y, Pb, Pr
COMPONENT
video cable
Go to page 12
HDMI TMcable
HDMI IN 1,2, 3
Audio cable with 3.5mm terminal
Go to page 13
PC INPUT
VGA cable
VGA, Audio In
Note:
HDMI,
the HDMI
logo, and High-Definition
Multimedia
Interface
are trademarks
or registered
trademarks
of HDMI
Licensing
LLC
Caution:
Unplug
the AC cord
when you connect
other
devices
to TV.
9
Connecting AV Composite device (Good Video Quality)
To connect an composite
AV device, such as a DVD player, follow these steps:
1. Connect
the Video In jack on the back of TV to the video output jacks of device via video cable (yellow).
2. Connect
the AUDIO-IN
and R jacks on the back of TV to the audio output jacks of device via audio cable.
Notice the left channel jack and plugs are white and the right channel jack and plugs are red.
Note: AV signal belongs to composite
Composite
Video
video. This kind of video signal has regular good display quality.
Connection
The picture below is an example of a connection
using the composite
video jack.
The back of TV
The output panel of other device
10
Connecting YPbPr Component device (Better Video Quality)
To connect a component
1. Connect
device, such as a DVD player, follow these steps:
the COMPONENT
1,2 Y/Pb/Pr jack on the back of TV to the video output jacks of device via video cable (green,
blue and red).
2. Connect
the COMPONENT
1,2 AUDIO-IN
L and R jacks on the back of TV to the audio output jacks of device via audio cable.
Notice the left channel jack and plugs are white and the right channel jack and plugs are red.
Note. Y/Pb/Pr jacks are component
Component
Video
video. This kind of video signal has better display quality.
Connection
The picture below is an example of a connection using the component video jack.
',,
/
The back of TV
The output
panel of other device
11
Connecting
HDMI device (Best Video Quality)
To connect an HDMI device, such as a DVD player, please Connect the HDMI1,2,
or 3 jack on the back of TV to the output
jacks of device via HDMI cable.
Note: HDMI (High-Definition Multimedia Interface) is a compact audio/video interface for transmitting
data. It carries the audio and video signal via the same cable and has the best display quality.
HDMI
uncompressed
Connection
The picture below is an example of a connection
using the HDMI video jack.
/
The back of TV
The output panel of other device
12
digital
Connecting a computer
To connect a computer,
follow these steps:
1. Connect
the PC INPUT VGA port on the back of TV to the VGA output jack of device via D-sub 15-pin cable.
2. Connect
the PC INPUT Audio In jack on the back of TV to the audio output jack of computer
Note. If you want to use your TV as a monitor, please notice that the maximum
Please set the computer graphic correctly.
with audio cable (3.5mm).
resolution for 40LA45RQ
is !920"!080.
PC Connection
The picture below is an example of a connection
using your TV as a PC monitor.
PC INPUT
The back of TV
PC
How to Obtain Various Kinds of Input Sources
After connection
is done, press INPUT button on remote control or TV top panel to choose the input source you need.
See page 19, Basic Operation of TV.
13
ANT/CABLE:
Connect to receive the signal from your antenna or cable via coaxial cable.
Head phone:
Connect
a 3.Smm headphone for personal audio.
Digital Audio-out:
Connect
AUDIO OUTPUT
L/R: Connect
Note:• Digital Audio-out
a coaxial cable for digital audio output.
L/R, Video
to be connected
to audio power
smoother and more powerful sound performance.
In: Connect
an AV device that has composite
or a DVD player. To access device connected
remote; then press the up/down
• AUDIO-IN
coaxial cables for analog audio output.
and AUD/O OUTPUT L/R are supposed
amplifer, which proddes
AUDIO-IN
double-channel
video jacks, such as a VCR
to these jacks, press the INPUT button on your
arrow to select AV. Press the ENTER button at last to confirm.
L: Left audio channel connection.
The left audio connector
is usually white. For mono audio
sources, be sure to use the left AUDIO INPUT.
• AUDIO-IN
Note:•
R: Right audio channel connection.
The AV input (Video In), COMPONENT
COMPONENT
1,2 Y/Pb/Pr:
Connect
To access device connected
select Component1
•
Y/Pb/Pr
(Component
is usually red.
I _nput _, Pb, Pr) share the same audio _nput jacks-AUD/O-tN
a device that has component
L/R.
video jacks, such as a DVD player.
to the Y/Pb/Pr jack, press the INPUT button on your remote; then press the up/down
or Component2.
Use three video-grade
The right audio connector
Video):
arrow to
Press the ENTER button at last to confirm.
They provide good picture quality because the video signal is separated
or component
video cables for the connection.
When using Y/Pb/Pr,
into three components.
make sure you connect left and
right audio cables to the Audio L and Audio R jacks.
HDMI1, 2, 3: (High-Definition Multimedia Interface) It provides an uncompressed
data by way of an integrated mini-plug cable.
PC INPUT VGA: Connect your computer
PC INPUT Audio-In:
SERVICE:
AC-IN:
14
that carries both video and audio
or other device with a VGA output to this jack using a 15-pin, D-sub cable.
Use to obtain sound when a PC is connected
For service use only. Do not connect any device.
AC power input.
digital connection
to TV. Use 3.5mm stereo mini-pin cable to connect PC to TV.
Side Keypad
Buttons
If you cannot locate your remote, you can use the side keypad buttons on your TV to operate many TV features.
INPUT: Displays the Source Select List.
MENU ([_):
Displays the TV Main Menu.
CH+:Scans
up through the channel list. In the TV menu system, it acts like the up arrow on the remote control and
can be used to select menu options.
OH-: Scans down through the channel list. In the TV menu system, it acts like the down arrow on the remote control
and can be used to select menu options.
VOL+: Increases the volume. In the TV menu system, it acts like the right arrow on the remote control and can be used
to select menu options.
VOL-:
Decreases the volume. In the TV menu system, it acts like the left arrow on the remote control and can be used
to select menu options.
POWER ((_): Turns the TV on and off.
Front Panel
About remote control working distance and angle, see page 16.
Power/Standby
Indicator:
Blue and red dual-color
LED. It shows red when the TV is turned off and blue when turned on.
Remote Control Sensor: Remote control IR sensor, which receives infrared ray sent by remote control.
/
Remote Control Sensor
•
)
Power/Standby Indicator l
(blue/red)
o
15
Inserting
Batteries
in the Remote
Remove the cover of battery cabin on the back of the remote control by lifting the cover
Insert two AAA batteries
making sure the polarities (+ and ) are aligned correctly
Place the cover back
If the remote
control
does not work, check
• Are the polarities (+)
these points:
correct?
CAUTION:
•
Used batteries should be recycled
• Are the batteries worn out?
•
Keep out of children's
•
Is there an AC power failure?
•
DO NOT use new and old batteries together
•
Is the power cord plugged in?
• Change both the batteries at the same time
•
Is there any interference or block near the remote
control sensor?
• When not using the remote control for a long time
remove the batteries from the unit
reach
Remote Control Reception Angle
Use your remote control within the distance and angle range shown below
7 meters
J
16
Remote Oontrol Buttons
MUTE ([:_):
Reduces the TV volume to its minimum level. Press again to restore the volume.
POWER (_):
Turns the TV on or off.
CH.LIST:
Displays the channel list.
FAV.: Adds the current channel to your favorite list, or erases the current channel from
your favorite list (if this channel is a favorite channel already).
FAV.+ or FAV.- : Scans up or down through the current favorite channel list.
Numeric Buttons: Use these buttons to enter numbers.
"--": To enter a digital channel with a sub-channel,
button to enter the sub-channel
Recall(g):
enter the main channel; then, press this
and press ENTER.
Returns to the previous channel.
EPG: Shows Electronic Program Guide (see page 20).
INPUT: Accesses the available input channels (TV, AV, Component
1/2, HDMI 1/2/3, PC).
Use the arrows to highlight options, and press ENTER to select.
Arrows
(_1/•/A
/ v ): Uses the four arrows to highlight different items in the TV menu or
change the value. The up/down arrow can also work as CH+/CHbutton, and the left/right arrow can also work as VOL-/VOL+
button.
ENTER: Enter and confirm button.
MENU:
Accesses the Main Menu, or return to the upper level of a sub-menu.
FREEZE : Freeze the current screen frame, press again to return to normal.
DISPLAY: Displays the Channel Bar (see page 20).
EXIT: Exits the current menu or function.
VOL+ or VOL-:
Increases or decreases
the TV volume.
CH+ or CH-: Scans up or down through the current channel list. Press once to change
the channel up or down; press and hold to continue changing channels.
PICTURE: Switches between the preset picture mode (see page 21).
SOUND: Switches between the preset sound mode (see page 23).
SLEEP: Selects the sleep timer, after which the TV will shut off automatically.
ASPECT:
Switches between the preset screen size mode (see page 22).
CC: Selects the closed caption.
MTS: Selects the multi-channel television sound.
NOTE : The keys not fisted are for DVD controi,
they are not avaiiabie for this TV modei.
Remote
control
part
number
RE20QP28
17
If it is the first time you turn on your TV, or you have done Clear Channel List option (see page 28), the initial setup menu appears
automatically.
Menu
Language
To choose your menu language, press the left/fight arrow until the language you need appears.
Available languages:
Signal
English, French and Spanish.
Type
To choose your TV tuner signal type, press the left/right arrow until Air or Cable appears.
Note: please select TV signal type according
Auto
Channel
to the antenna or cable closed circuit TV you use.
Search
To execute auto channel search, press the up/down
arrow to highlight Auto Channel Search and press ENTER button.
What to notice:
1. The channel search access starts from the Analog TV channel searching
and ends at Digital TV channel searching.
2. The channels that have been found will be stored automatically.
3. You can press MENU or EXIT button to skip analog/digital
channel searching.
4. You can press MENU or EXIT repeatedly to end the channel searching.
18
Turning On and Off
Connect the AC cord to power the LCD TV. At this time the TV will enter standby mode and power indicator shows red.
Use Power button (_)
on the side panel of TV or on the remote control to turn on the TV. After switching
off the TV for 5 seconds,
you can turn on TV again.
Choosing TV Channel
Tuning To Analog Channels
An analog channel has a channel number beginning with "A". Input the digital number with numeric buttons directly and press
ENTER button to confirm.
For example, to watch analog channel "A51 ", press "5", "1 ", "ENTER" on remote control in sequence.
Note; Although there is no analog TV signal available in America, we reserve ATe! functions for some expansible use.
Tuning To Digital Channels
A digital channel has a channel number beginning with "D". Input the main digital number with numeric buttons directly, then press
" --"
button on remote control, and input the sub number at last.
For example, to watch analog channel "D31-1 ", press "3", "1 ", .....
Changing
Channels
button. "ENTER" on remote control in sequence.
Directly
You can use CH+ button to increase channel number and CH- to decrease channel number. When no OSD (On Screen Display) is
used, the up/down
arrows can also work as CH+/CH-
buttons.
Selecting Input Source
Press INPUT button on remote control to display Source Select list.
Use up/down
arrows to highlight the source you need and press ENTER to confirm.
Adjusting TV Stand Angle
The TV cabinet can manually adjust to left or right for 30 degrees from the centre.
You can adjust the angle for the best viewing effect and comfort.
19
Channel Bar
Press the DISPLAY button on the remote control, the channel bar will appear on the right top of screen. It displays the current
channel's information.
The following list describes the items on the channel bar.
ATV
A2/D50-1
DTV
If the channel is analog, A is displayed. If it's a digital channel, D is displayed. For example, in the pictures
above, A2 is an analog channel, and D50-1 is a digital channel ( -1 is a sub-channel
MTV/KOCE-HD
Displays the channel label.
Mono/English
Displays whether the current channel is being broadcast
number).
in stereo or mono. If the current channel is digital,
this space will be SAP (Second Audio Program) language.
480i/1080i
Displays the signal resolution.
16:9/CC/TV-PG
Displays the screen aspect ratio, closed caption and TV rating level of the current program or channel.
And these are only available for digital channels.
Oct-31
23:14 Mon
Current date and time.
Adjusting Volume
Press the VOL+/VOL-
button on the remote control to adjust the volume. If you want to switch sound off, press MUTE (1_).
When OSD (On Screen Display) is not used, the arrows lefVright can also work as VOL-/VOL+
butttons.
EPG (Electronic Program Guide)
Press EPG button on the remote control, the electronic
The electronic
20
program guide gives the TV program
program guide will appear in the center of screen.
playing project. You can use left/right arrows to switch pages.
Adjust the OSD Screen
The OSD (On Screen Display) menu enables you to approach
to the TV functions.
To use OSD menu system, press MENU button on remote control, then use left/right arrow to highlight an option from PICTURE,
SOUND, CHANNEL, PARENTAL, SETUP or OTHERS and press ENTER button.
Press the up and down arrow to move to a different option within each menu. If necessary,
the choices of the option you've highlighted.
previous menu, press the MENU button.
press ENTER or right arrow to display
If available, use the text at the bottom of each screen for help. To return to the
To exit the OSD menu:
• Press the EXIT button. The menu will clear from the screen.
• Press the MENU button repeatedly until the menus disappear.
Picture Menu
The Picture Menu contains menus and controls to configure the way the picture appears. The Picture Menu options apply to the
video for the main TV and VIDEO INPUT selections. All picture options can be applied to each input.
Press MENU on the remote. Select Picture from the Main menu. Press the ENTER button to proceed to PICTURE menu.
Use up/down
to choose the function you need, press
ENTER or right arrow to adjust or enter a sub-menu.
sub-menu
Picture
image and explanation
The
are shown below.
Settings
Picture Settings: Choose the preset visual mode of your TV:
Standard,
Movie, User, Dynamic. Only in User mode you can
adjust Brightness, Contrast,
Color, Tint and Sharpness.
Brightness: Adjust the brightness
of picture.
Color: Adjust the richness of color.
Tint: Adjust the balance between red and green level (only
available in NTSC signal.
Sharpness:
Adjust the sharpness
level of picture.
21
Screen
Settings
Screen Size: Select a screen aspect ratio.
(Available ratio: Full, Normal, Waterglass and Cinema.)
Please choose the ratio that applies to your video signal format best.
Auto Wide: Make the screen size compliant
with signal format
automatically.
If you turn on this function, the Screen Size setting will be ignored.
PC Settings
(only available
in PC mode)
Auto Adjust: Adjust the PC picture display automatically.
Horizontal Position: Adjust the horizontal position of picture.
Vertical Position: Adjust the vertical position of picture.
Clock: Adjust the clock of picture.
Phase: Adjust the phase of picture.
Reset: Reset all the PC picture settings to factory default.
Color
Temperature
This option allows you to select one of three automatic color adjustments: Cool for a bluer palette of picture colors; Normal or
Warm for a redder palette of color.
Advanced
Picture
Settings
(not available
in PC mode)
Dynamic Contrast:
Set dynamic
contrast on/off.
Film Mode: Set film mode on/off.
Noise Reduction: Set noise reduction
MPEG Noise Reduction:
as Off/low/Medium/High.
Set MEPG noise reduction as Off/Low/Medium
or High.
Note: Noise reduction
helps to reduce the picutre "static" or any type of
interference. This feature is especially useful for providing a clearer picture
in weak analog signal conditions.
The MEPG Noise Reduction specifically
works on video signal with MPEG coding.
22
Sound Menu
The Sound Menu lets you adjust audio output. To access the Sound Menu, press MENU on the remote, and then select SOUND
from the Main Menu. Press ENTER button to proceed
to SOUND menu.
Use up/down to choose the function you need, press
ENTER or right arrow to adjust or enter a sub-menu.
sub-menu
Sound
image and explanation
The
are shown below.
Settings
Sound Mode: Choose the preset sound mode of your TV:
Standard,
Soft, User, Dynamic. Only in User mode you can
adjust Bass and Treble.
Bass: Adjust the bass component
of TV sound.
Treble: Adjust the treble component
of TV sound.
Balance: Adjust the balance between the left and right channel.
Surround
Mode
Creates a 3D sound surround from standard stereo material, with deep and rich enhancement.
Analog
Sound
Select analog TV audio sound type: Stereo, Mono or SAP (only available in TV mode).
Digital Sound
Select digital TV audio language type: English, French or Spanish (only available for DTV channel).
Other Settings
Set AVL (auto volume control) on/off.
Set TV speakers on/off.
Set the audio output type as Off, PCM or Dolby Digital.
Please set this option according
to your power amplifier.
23
Equalizer
Settings
The seven-band
graphic equalizer allows you to adjust the audio frequency
settings. You can select one of the equalizer presets (OFF, POP, ROCK,
JAZZ) or create your own personal preset (USER).
Press the left or right arrow to select the frequency (100Hz, 250Hz, 500Hz,
1KHz, 2KHz, 4KHz, 10KHz) you want to adjust. Use the up or down arrow
to adjust.
Channel Menu
The Channel Menu enables you to search, view and edit channels. It is available in TV mode only.
Press MENU and choose CHANNEL from the Main menu. Press the ENTER button to proceed to CHANNEL menu.
Use up/down to choose the function you need, press
ENTER or right arrow to adjust or enter a sub-menu.
sub-menu
Channel
image and explanation
The
are shown below.
List
Display a channel list. It shows the current channels.
Favorite
List
Display a favorite channel list. It shows the current favorite channels.
Channel
Settings
Go to channel setting sub-menu
(as shown below).
Press left/right arrow to switch the channel you want to edit.
Set if the current channel is contained
--
in channel list.
Enter a channel label to rename the current channel.
Set if the current channel is the favorite channel.
24
Signal Type
Select your TV signal type: Air or Cable.
Auto Channel
Search
Execute an auto channel search (see page 18).
Parental Menu
The Setup Menu enables you to lock program with special content, panel key board and input source.
Press MENU and choose PARENTAL from the Main menu. Press the ENTER button to proceed to PARENTAL menu.
Lock Parental
Control
• When the Parental Control Menu is accessed from the Main Menu, you need to enter password to unlock the menu function.
Please enter your four-digit password with numeric keys 0-9.
Note: The original passwo/_ is "0000",
• After unlocking, the items in parental control menu can be used. Use arrow up/down to highlight the function you need and
press ENTER or right arrow to use V-chip, Change Password, Front Panel Lock and Source Lock, Clear Channel List sub-menu.
V-Chip
The following graphic details where items locate within the V-Chip menu.
US V-Chip
Press ENTER or right arrow to enter US V-Chip ratings menu, which contains two sub-menus:
Movie Rating and TV rating.
See next page for more details.
25
Movie
Rating
Use arrow keys to select the rating level you want to block,
press ENTER to IocWunlock the rating level. If you have
blocked a lower level rating, the higher ratings will be
blocked too.
For example, when PG-13 is blocked,
be blocked at the same time.
TV Rating
Similar with Movie Rating.
After adjusting, press MENU to return or press EXIT to exit the menu..
TV Rating Overview
TV-MA
Mature Audience Only
D
Sexually Explicit Dialogue
TV-14
Parents Strongly Cautioned
L
Adult Language
-R/-PG
Parents Guidance Suggested
S
Sexual Situations
TV-G
General Audience
V
Violence
TV-Y7
Directed to Children 7 Years and Older
FV
Fantasy Violence
TV-Y
All Children
For more rating explanation,
26
see page 35.
R, NC-17 and X will
Canada
V-Chip
Press ENTER or right arrow to enter US V-Chip ratings menu, which contains two sub-menus:
English
English Rating and French Rating.
Rating
Press ENTER or right arrow to enter English rating menu.
Use arrow keys to select the rating level you want
to block, press ENTER to IocWunlock the rating
level. If you have blocked a lower level rating,
the higher ratings will be blocked too.
For example, when PG is blocked, 14+ and 18+
will be blocked at the same time.
French
Rating
Press ENTER or right arrow to enter French rating menu.
Similar with English Rating.
Note: These ratings are
available only if the
broadcaster ls sending
rating info/rnation.
Block
Unrated
Show
Block all the unrated program.
Downloadable
Rating,
Activate or downloadable
Clear Downloadable
Data
rating data. if available.
27
Change
Password
Change the password
of parental menu.
Input the old password.
Input the new password.
Input the new password again to confirm.
Front Panel Lock
Select this option to block or unblock the TV's side panel buttons so that they can't be used.
Source
Lock
This option allows you to lock or unlock the input source. The source blocked can not be
chosen from input list unless you input the correct parental password.
Use up/down arrow
to select the source,
press ENTERto
lock or unlock it.
Clear Channel
List
This option allows you to execute Clear Channel List function.
This function will reset the whole TV system to factory default (not only reset OSD menu).
28
Setup Menu
The Setup Menu lets you config the TV with your preferences.
Select SETUP from the Main Menu. Press ENTER button to proceed to SETUP menu.
Use up/down
to choose the function you need, press
ENTER or right arrow to adjust or enter a sub-menu.
sub-menu
Closed
Caption
Closed
Caption
image and explanation
The
are shown below.
Press left/right arrow to select closed caption display on or off.
Analog
Caption
Type
Press left/right arrow to select analog closed caption type: CC1, CC2, CC3, CC4, TEXT1, TEXT2, TEXT3, TEXT4.
Digital
Caption
Type
Press left/right arrow to select digital closed caption type: Service1, Service2, Service3, Service4, Service5, Service6.
Digital
CO Preset
Press left/right arrow to select digital closed caption preset: Default, Custom.
Only in custom
Digital
mode you can adjust the digital closed caption style.
CO Style
Press left/right arrow to go to digital closed caption style sub-menu (see next page).
29
Digital
CO Style
--
Select the item you want to adjust in Digital CC Style menu
with up/down
arrows.
After changing, you can preview the caption style here.
Clock
Time Zone
Select your time zone: Eastern, Central, Mountain,
Pacific, Alaska, Hawaii, Samoa, Newfoundland,
Atlantic.
Auto Clock
Select auto clock on/off. Auto clock helps you synchronize
Setup Time
Set your TV time manually (needs to turn off auto clock).
Day of Week
Display what day it is (can't be adjust, display only).
3O
your TV time to standard time (from DTV signal).
Others Menu
The Others Menu lets you config the TV with your preferences in other features.
©hoose OTHERS from the Main Menu. Press ENTER button to proceed to SETUP menu.
Use up/down
to choose the function you need, press
ENTER or right arrow to adjust or enter a sub-menu.
The sub-menu
image and explanation
are shown below.
Blue Back
Press ENTER button to select Blue Back on or off. If the Blue Back is turned on, the TV will display a blue background
when there is no signal input.
No Signal
Power
Off
Press ENTER button to select "No Signal Power Off" on or off. If it is turned on, the TV will shut off after 10-minute
no signal time. We suggest you turn on this function when Blue Back is turned on. Because it may hurt the LCD panel
if the blue screen lasts too long.
Note: In PC mode, the monitor standby and power off settings depend on the No Signal Off time.
No Operation
Power
Off
Press ENTER button to select "No Operation Power Off" on or off. If it is turned on, the TV will shut off after a 3-hours
no operation time.
All Reset
Press ENTER button to execute reset to TV system. All the settings will be reset to factory default.
Audio
Only
Press ENTER button to activate audio only mode. The TV will output only sound and the LCD panel will be turned off.
To restore normal playing, hold POWER button for three seconds.
31
What's the most convenient
Connect
way to view High Definition
(HD) video?
an antenna to the TV Input jack to view free local digital channels. You may need to purchase an antenna. (See page 8
for more information about antenna setup).
Visit www.antennaweb.org
for assistance
in deciding what type of antenna to use to receive the local digital channels available
to you. After entering your location, this mapping
certain antenna.
program tells you which local analog and digital stations are available using a
Are there other ways to view High Definition
(HD) video?
Besides using an antenna as mentioned above, you can also use a set-top box to receive digital video. Contact your cable service
provider or satellite provider to purchase
digital programming
and have them connect the box to ensure you are viewing channels
in the best way.
How do I tell an analog
channel from
a digital channel?
Press the DISPLAY button to display the Channel Bar. Look at the top right corner of the screen. An "A" is displayed for an analog
channel. A "D" is displayed for a digital channel.
Note: Since the analog TV in America has been cut off, we reserve analog TV function only for some unexpected
Why are there bars on my screen,
use.
and can I get rid of them?
Most digital video is sent in a 16/9 format which fills your screen, but is sometimes
depends on how the station or device connected
to your TV is formatting
sent in 4/3 which does not fill your screen. It
the video. If there are bars on the screen, press the
ASPECT button to try a different format that may eliminate the bars. Some bars can't be removed because of the way the format
is sent by the broadcaster.
The format changes as you press the ASPECT button and the format type is displayed at the bottom
of the screen. For more information
Why does channel
search
on screen formats, go to page 22.
find a lot of channels,
Some channels don't carry programming,
but when I try to tune to them, there's
nothing
there?
such as video On Demand. When channels are unavailable, your TV screen is blank or
appears like snow. You probably want to remove these channels from your channel list. Remove these in the Channel List Menu.
Go to page 24 for more information.
Why does it take a long time when I search
the channels
at first time?
If you have both analog and digital channels, the TV is looking for all available channels in the channel list. If you do have digital
channels, the TV is also searching for scrambled
32
channels, non-scrambled
channels, and each sub-channel
of that digital channel.
ldent ng Problen
If there are any problems when using the product, please consult the list below. If the list does not solve the problem, call our
Customer
Service Center immediately.
TV Problems
The TV can't be turned on.
•
Make sure the AC cord is plugged in.
•
Check the wall outlet, make sure the AC output works normally and stably.
•
The side panel may be locked (disabled). Use the remote control to turn on the TV.
•
Select the Front Panel Lock function in the PARENTAL Menu and press ENTER to uncheck the locking status.
There is no picture or sound but the TV is on and there is a "No Signal" sign on screen.
• Are you trying to use an input source with no device connected
to it? For using other video/audio
device, make sure the external
device works normally first, then press INPUT and choose the right input source.
•
The Signal Type option may be set incorrectly.
•
The channel may be blank. Try to search the channel again or change another channel.
Go to page 18 for detailed instructions.
The sound is fine, but the picture is poor.
•
If you can only get black and white pictures from external device that you've connected
cables is not connected
well, or they are connected
wrongly.
Check the connection
to your TV, maybe it is due to the video
stability first, then check the correctness.
For AV input, the yellow video cable connects to the yellow Video In jack on the side of your TV. For Component
Y, Pb, Pr video cables (red, blue, and green) should be connect to the corresponding
•
Check the antenna connections.
Make sure all of the cables are firmly connected
input, the three
input jacks on the side of your TV.
to the TV jack on side of your TV.
• Try adjusting the color features to improve.
There is no sound,
but the picture is fine.
•
The sound might be muted. Try pressing the MUTE button to restore sound.
•
For using AV or Component,
•
The sound settings may not be set correctly. Go to page 23 for more information.
remember
to connect the device's left and right audio output correctly. The left channel
cable is white and the right channel cable is red. Please match the cables and jacks accoding to there colors.
•
If your audio source has only one jack or is a (mono) audio source, make sure you have plugged the connection
into the
Audio In L jack (white) on the TV.
The buttons on the side panel don't work.
• Theside panel may be locked (disabled).Use the remotecontrolto turn on the TV.
• Select the Front Panel Lock function in the PARENTAL Menu and press ENTER to uncheck the locking status.
• Unplug the TV from the AC power for 10 minutes and then plug it back. Turn the TV on and try again.
The TV turns off unexpectedly.
•
The electronic protection
circuit may have been activated because of a power surge. Wait 30 seconds
on again. If this happens frequently,
the voltage in your house may be abnormal.
and then turn the TV
If the other electronic equipment
in your home
can't work normally, consult a qualified service personnel.
33
Can't select a certain channel.
• The channel may be blocked or not approved in the PARENTAL Menu.
• The channel may be skipped in channel list in CHANNEL Menu. Check the blocking and skipping status of channel.
The stereo sound performance
•
is bad.
It may be a weak station. Use the SOUND Menu and set Analog Sound as Mono.
A black box appears
•
on the screen.
Closed captioning might be on. Check Closed Caption in the SETUP menu. Go to page 30 for more instructions.
Problems
•
with the HDMI
Connection.
Make sure the HDMI device (DVD, video gamer, etc.) is turned on and the cables are firmly connected. If problems still occur, turn off
your device and reconnect it. Reset the power by unplugging the power cord and plugging it again.
•
If a "No Signal" message appears on screen, the HDMI device isn't responding. Contact the manufacturer of the HDMI device for
further assistance.
•
Ifyou have black bars on each side of your picture (which means the TV can not display a full-screen image), the device you connected
might have a switch or a menu option allowing you to change the picture quality output that will fix this. Choose either 720p or 1080i.
The Remote control doesn't
•
Something
work.
might be blocking between the remote control and the remote sensor on the front panel of the TV. Make sure
there is a clear path.
•
The remote may not be aimed directly at the TV.
•
The batteries in the remote may be weak, dead, or installed incorrectly. Put new batteries in the remote.
You are experiencing
•
problems with V-Chip/Parental
If the rating limits don't work, you must lock the settings.
Controls.
Go to the Main Menu (press MENU on your remote), select
PARENTAL to check the settings.
What else can I do?
If you've been through the Troubleshooting
section and nothing has fixed your problem, try rebooting your TV. Note that after
a reboot, you may need to run your TV through the setup process again. To reboot, unplug the power cord from the wall
outlet or power strip. Keep your TV unplugged
for about 5 minutes. Then plug in the TV and turn it on. See if the problem
is fixed. If the problem remains, then please visit the Customer
RCA Customer
34
Support at the support
Support
Menu at www.rca.com
number provided in your Warranty card.
or updated
FAQs or contact
US V-Chip Rating System
TV-MA (Mature
Audience
Only): Specifically designed to be viewed by adults and may be unsuitable for children under 17. It
contains one or more of the following content themes: crude indecent language (L), explicit sexual activity (S), or graphic violence (V).
TV-14 (Parents
Strongly
Cautioned):
Contains some material that many parents would find unsuitable for children under 14.
Parents are strongly urged to exercise greater care in monitoring this program and are cautioned
age of 14 watch unattended.
This program
contains one or more of the following content themes: intensely suggestive dialogue (D),
strong coarse language (L), intense sexual situations
rV-PG
(Parental
Guidance
Suggested)
(S), or intense violence (V).
: Contains material that parents may find unsuitable for younger children. Many parents
may want to watch it with their younger children. The program contains
suggestive
dialogue (D), infrequent
TV-G (Parental
or situations
Audience):
against letting children under the
one or more of the following content themes:
coarse language (L), some sexual situations
some
(S), or moderate violence (V).
Most parents would find this program suitable for all ages. It contains little or no sexual dialogue (D)
(S), no strong language (L), and little or no violence (V).
TV-Y7 (Directed
to Children
7 years and older): Designed for children age of 7 and above. It may be more appropriate
who have acquired the developmental
skills needed to distinguish
for children
between make believe and reality. Themes and elements in this
program may include mild fantasy violence (FV) or comedic violence, or may frighten children under the age of 7.
TV-Y (All Children):
Themes and elements in this program are designed for a young audience,
including children ages 2-6.
It is not expected to frighten younger children.
Canadian English V-Chip Rating System
18+ (Adult):
Programming
intended for adults 18 and older. It may contain elements of violence, language, and sexual content
which could make it unsuitable for viewers under 18. Violence Guidelines: May contain violence integral to the development
the plot, character or theme, intended for adult audiences.
Other Content Guidelines: May contain graphic
of
language an d explicit
portrayals of nudity and/or sex.
14+ (Viewer 14 and over): Programming
Parents are strongly cautioned
contains themes or contents which may not be suitable for viewers under the age of 14.
to exercise discretion in permitting viewing by pre-teens
and early teens. Violence Guidelines:
May contain intense scenes of violence. Could deal with mature themes and societal issues in a realistic fashion.
Other Content Guidelines: May contain scenes of nudity and/or sexual activity. There could be frequent use of profanity.
PG (Parental
Guidance):
Programming
intended for a general audience but which may not be suitable for younger
(under the age of 8). Parents may consider some content inappropriate
Violence Guidelines: Depictions
supernatural
of conflict and/or aggression
for unsupervised
will be limited and moderate;
children
viewing by children aged 8-13.
may include physical, fantasy,
or
violence. Other Content Guidelines: May contain infrequent mild profanity, or mildly suggestive language.
Could also contain brief scenes of nudity.
G (General Audience):
it is understood
Programming
considered
acceptable
for all ages groups. While not designed specifically for children,
younger viewers may be part of the audience. Violence Guidelines: Will contain very little violence, either physical or
verbal or emotional.
Will be sensitive to themes which could frighten a younger child, will not depict realistic scenes of violence
which minimize or gloss over the effects of violent acts. Other Content Guidelines: There may be some inoffensive slang, no
profanity and no nudity.
35
C8+ (Children
8 and older):
Programming
generally considered acceptable
for children 8 years and over to watch on their own.
Violence Guidelines: Violence will not be portrayed as the preferred, acceptable,
children to imitate dangerous
or only way to resolve conflict or encourage
acts which they may see on television. Any realistic depictions
discreet, of low intensity and will show the consequences
of violence will be infrequent,
of the acts. Other Content Guidelines: There will be no profanity,
nudity or sexual content.
C (Children):
Programming
intended for children under age of 8. Violence Guidelines: Careful attention is paid to themes which
could threaten children's sense of security and well being. There will be no realistic scenes of violence. Depictions
of aggressive
behavior will be infrequent and limited to portrayals that are clearly imaginary, comedic or unrealistic in nature.
Other Content Guidelines: There will be no offensive language, nudity or sexual content.
Canadian French V-Chip Rating System
18+ (Adult):
Programming
is for adults only. This program contains sustained violence or extremely violent scenes.
16+ (Viewer 16 and over): Programming
is not suitable for those under age 16. This program contains frequent scenes of
violence or intensely violent scenes.
13+ (Viewer 13 and over):
Programming
may not be suitable for children under the age of 13. This program either contains
several violent scenes or one or more scenes that are violent enough to affect them. Viewing in the company
therefore strongly recommended
of an adult is
for children under the age of 13.
8+ (Viewer 8 and over): Not recommended
for young children. This program is suitable for most audiences,
but it contains
or occasional violence that could upset young children. Viewing in the company of an adult is therefore recommended
children (under the age of 8) who do not distinguish
G (General Audience):
between reality and imagination.
This program is suitable for audiences of all ages. It contains no violence, or any violence that it does
contain is either minimal or is presented in a humorous
manner, as a caricature,
For Universal Remote Control brands listed below, please use accompanying
•
Codes for DIRECTV: 0178, 10178
•
•
Codes for Time Warner Cable: 0178, 10178
Codes for Cox Communications:
0178
•
Codes for Comcast:
•
Codes for Dish Network: 627
•
Codes for Fios Verizon: 0205, 0057, 0493, 0775
10178
or in an unrealistic way.
codes and refer to your Universal Remote Control
User Manual for basic Instruction for changing TV code to operate the TV model.
36
mild
for young
40LA45RQ
VESA 400 x 200
i
400 mm
200 mm I
[
M6 screws, length 14mm
I
?
®
Note:
A. The wall mount is not contained
in the accessories
sold with television. We only provide the installing specifications
but not the
wall mount itself. If you need the mount, please consult with the local dealer for a VESA wall mount.
B. We strongly suggest to set the wall mount with equipments
of specification
we ordered.
If not, inappropriate
installing may
cause damage to device or people.
Warnings:
1. Do not set up the wall mount by yourself. Please contact qualified professionals
for installation.
2.
The TV should not be mounted on walls or surfaces which have an angle more than 10 degrees with vertical direction.
3.
The walls for mounting
Otherwise the TV set may fall.
must have enough strength to hold the whole weight of TV set. For example, concrete wall and brickwork
are eligible. Do not place the mount on soft walls such as earth walls and plasterboard.
4.
If spare parts of different specifications
(such as screws) are used during mounting,
consult with qualified professionals
to make
sure these parts are safe and effective.
5.
Before attaching the base to wall, ensure the holes for anchors are in keeping with the installing rules. Otherwise there may exist
some potential problems.
6.
Do not place any heating source under your television. Or else, it can cause fire.
7.
Do not place the TV near anything dripping.
Or else, it may cause creepage,
Transducers
and high voltage wires should be kept far away from the apparatus too.
electric shock or bad resonance.
8.
Do not place TV in a location where collision or vibration is liable to happen.
9.
In order to avoid unexpected
falling of the TV set, do not put any strong force on TV or wall mount after installing.
10. Be sure to unplug the TV before installing. Keep anything hard or sharp away from the screen panel to prevent the scuffing.
11. After installing, if there is any need to move the cabinet, please contact the qualified professionals.
37
Diagonal Display Size
40 inches
Television System
American TV standard ATSC/NTSC
VHF: 2-13
Channel Coverage
UHF: 14-69
Digital Terrstrial Broadcast
system
CATV: 1-135
(8VSB): 2-69
Digital Cable (64/256QAM):
1-135
AC 110 V, 60Hz
Power Supply
Cable/Antenna
RF input
x 1
AVx 1
Connection
Interface
Video input
Component
x 2
HDMI x 3
AVx 1
Audio input
Component
x 2
PC Audio In x 1
Audio output
Headphone
Graphic input
RGB 15pin x 1
Resolution
1920 x 1080
Component/HDMI
Dimension
Weight
mode
38.6"W x 26.8"H x 9.8"D
Without
38.6"W x 25.0"H x 4.3"D
stand
Package
49.4"W x 30.7"H x 8.5"D
With stand
41.1 LBS (18.5KGS)
Without
35.6LBS
(16KGS)
48.2LBS
(21.7KGS)
Power Consumption
38
480i, 480p, 720p, 1080i, 1080p
With stand
Package
Notice:
x 1, Digital Audio Out x 1, Analog Audio Out (L/R) x 1
Specifications
stand
less than 230W
are subject
to change
without
notice.
ON Corp US, Inc.
4370 La Jolla Village Drive, Suite 400
San Diego, CA 92122
©2010 ON Corporation
RCA is a trademark of RCA Trademark
used under license to ON Corporation.
Management
SAS