Crosley Radio CR12-2 Stereo System User Manual

CR12-2
iJuke Deluxe
Instruction Manual
910-262300-001
8-8-07
IMPORTANT SAFETY INSTRUCTION
WARRANTY
Crosley Radio Products are warranted against defects in material and
workmanship for a period of 90 days beginning from the date of sale to the
original purchaser.
Should the unit fail under normal usage during the 90 day warranty period, a
request for RETURN AUTHORIZATION (R.A.) must be made by the original
customer before returning the unit. Call Deer Rark Distributors customer service
for Return Authorization at (618) 427-3761 from 8:30 AM to 4:30 PM (Central
Time) Monday to Friday.
Upon receiving the RETURN AUTHORIZATION number from the Customer
Service Department, properly pack your unit in its original packaging. Include
any adapters, parts, & accessories which were originally provided with the
product, along with a check or money order for $99.95 made out to Deer Park
Distributors to cover the handling and return postage. Display the R.A. # on
the outside of the carton and ship PREPAID via standard UPS or its equivalent.
DEER PARK DISTRIBUTORS,LLC
ATTN: RETURNS DEPARTMENT
111 W. BIRCH STREET
BROWNSTOWN, IL 62418
DEER PARK DISTRIBUTORS assumes no responsibility for units sent without prior Return Authorization.
The purchaser’s bill of sale is the only proof of warranty entitlement and must accompany the unit.
The warranty does not cover damage due to acts of nature, accident, misuse, abuse, negligence, commercial
use or modification of, or to any part of the product. This warranty does not cover damage due to improper
operation or maintenance, connection to improper voltage supply, or attempted repair by anyone other than
a facility authorized by Crosley Radio to service the product. This warranty does not cover products sold
AS IS or consumables (such as fuses or batteries). This warranty is valid only in the United States.
This warranty gives the purchaser specified legal rights in addition to any rights which may vary from state
to state.
In accordance with the "Moss-Magnuson Warranty Act" of July 10, 1975, this is termed a "limited warranty"
which in no way compromises Crosley Radio‚ high standards of Quality and Workmanship.
12
PLEASE READ CAREFULLY ALL THE FOLLOWING IMPORTANT SAFEGUARDS
THAT ARE APPLICABLE TO YOUR EQUIPMENT
1.
2.
3.
4.
5.
Read Instructions - All the safety and operating instructions should be read before the product is operated.
Retain instructions - The safety and operating instructions should be retained for future reference.
Heed Warnings - All warnings on the product and in the operating Instructions should be adhered to.
Follow Instructions - All operating and use instructions should be followed.
Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use
a damp cloth for cleaning.
6. Attachments - Do not use attachments not recommended by the product manufacturer as they may cause hazards.
7. Water and Moisture - Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub; in a wet basement; or near a swimming pool; and the like.
8. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven
surfaces may cause the product and cart combination to overturn.
9. Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable
operation of the product and to protect it from overheating, and these openings must not be blocked
or covered, The openings should never be blocked by placing the product on a bed, sofa, rug, or
other similar surface. This product should not be placed in a built - in installation such as a bookcase
or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.
10. Power Sources - This product should be operated only from the type of power source indicated on the marking label,
if you are not sure of the type of power supply to your home. Consult your product dealer or local power company. For
products intended to operate from battery power, or other sources, refer to the operating instructions.
11. Grounding or Polarization - This product may be equipped with a polarized alternating-current line plug (a plug having
one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet try reversing the plug, If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
12. Power - Cord Protection - Power - supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them, paying particular attention to
cords at plugs, convenience receptacles, and the point where they exit from the product.
AC
13. Lightning - For added protection for this product during a lightning storm, or when it is left
Polarized Plug
unattended and unused for long periods of time, unplug it from the wall outlet and disconnect
the antenna or cable system. This will prevent damage to the product due to lightning and power - line surges.
14. Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
15. Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result
in a risk of fire or electric shock.
16. Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch
dangerous voltage points or short - out parts that could result in a fire or electric shock. Never spill liquid of any kind
on the product.
17. Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
18. Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel
under the following conditions;
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating instructions. Adjust only those controls that
are covered by the operating instructions as an improper adjustment of other controls may result in damage and
will often require extensive work by a qualified technician to restore the product to its normal operation.
e. If the product has been dropped or damaged in any way.
f. When the product exhibits a distinct change in performance - this indicates a need for service.
19. Replacement Parts - When replacement parts are required, be sure the service technician has used replacement
parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions
may result in fire, electric shock, or other hazards.
20. Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety
checks to determine that the product is in proper operating condition.
21. Wall or ceiling Mounting - The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
22. Heat - The product should be situated away from heat sources such as radiators. Heat registers, stoves, or other
products (including amplifiers) that produce heat.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful intereference to radio or
television reception, which can be determined by turning the equipment off and on , the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio TV technician for help.
WARNING:
General
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE. DO NOT REMOVE COVER.
PILOT LAMPS SOLDERED IN PLACE. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lighting flash with
arrowhead symbol, within
an equilateral triangle, is
intended to alert user to
the presence of uninsulated
"dangerous voltage" within
the product's enclosure
that may be of sufficient
magnitude to constitute
risk of electric shock
to persons.
CAUTION: TO REDUCE
THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE
COVER (OR BACK). NO
USER - SERVICEABLE
PARTS INSIDE. REFER
SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point
within an equilateral
triangle is intended to
alert user to the
presence of important
operating and
maintenance (servicing)
instruction in the
literature accompanying
the appliance.
Troubleshooting
There’s no sound?
1
Make sure the mute function is turned off.
2
Check that the volume is turned up by pressing
vol.+ button on remote.
3
Make sure ext. / int. /mix. switch on back of radio
is on “int.” or “mix.”.
(unless you are using external speakers, in which
case it should be on “ext.”.)
4
Check to make sure power is turned on.
CD does not play?
1
Check to make sure CD is inserted correctly
(label side facing up).
“Ventilation not to be impeded.”
“Do not expose to moisture or liquids. Do not place objects filled with
liquids, such as vases, on the apparatus. “
2
Check to see that surface of CD is clean.
3
Make sure radio is on CD function by pressing
CD / Radio button.
Specification
Remote not working?
FREQUENCY
:
POWER SOURCE
ANTENNA
:
:
:
:
:
:
:
:
:
:
POWER CONSUMPTION
AUDIO POWER OUTPUT
SPEAKER OUTPUT
SPEAKER
FM 87.5 -108.5 MHz
AM 525 - 1710 KHz
AC120V~60Hz
EXTERNAL 300 Ohm ANTENNA FOR FM
BUILT-IN FERRITE BAR FOR AM
110W
18W x 2
18W
6 1/2” Dynamic type x 2
4ohm 40watt
2 1/2” Tweeter type x 2
8ohm 10watt
1
Replace batteries.
2
Be sure and point remote towards remote sensor
when using.
3
Remove obstacles in the path of the remote and
the radio so that remote signal has a straight
path to the radio.
*DESIGN AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
11
CD Operation
Random Playing
By selecting Random Mode, the jukebox will
randomly select and play songs from the CD loaded
in the jukebox. To enable Random Play, follow the
steps below.
1
During playing, pause or stop mode, press
RANDOM (17/58) to enable random play mode.
“RANDOM” will appear on the display.
2
To exit RANDOM mode, press RANDOM (17/58)
again “RANDOM” will disappear from the display.
Repeat Playing
1
General
Connecting External Speakers
1
This jukebox is equipped with external speaker
outputs.
2
The speaker jacks for external speakers are
located on the back of the jukebox. Beside the
speaker jacks is a switch labeled (int./ext./mix).
When using external speakers, this switch must
be switched to the ext. or mix position. The ext.
position will allow only the external speakers to
play. The mix position will allow both the external
and internal speakers to play.
3
If you decide not to use the external speakers,
be sure the switch is on int. or the internal
speakers will not work.
To repeat one track, select the track you would
like to repeat and press PLAY/PAUSE (7/44).
Press the REPEAT (19/59) button once.
“REPEAT 1” will show on the display and the
selected track will play repeatedly.
Note: External speakers are not included with the
jukebox.
2
To repeat all songs on the CD, press the REPEAT
(19/59) button a second time. “REPEAT ALL”
will show on the display and the CD will start
over once finished.
3
If you are listening to an MP3 CD with different
albums/folders, you can repeat just the
album/folder that is playing by pressing the
REPEAT (19/59) button for a third time.
Using the Aux Input allows you to hook up additional
external audio components and listen to them through
your unit. Any component with an audio output such
as a Tuner, can be connected by using the correct
cables . This unit uses standard RCA cables. Simply
plug the red and white connectors on one end of
the cable to the red and white Aux In jacks on the
back of your unit. The other end of the cable will
plug into the Audio Output jack on the external
component. For more information on hooking up the
external component, see the owner’s manual for
that component.
4
To exit repeat mode, press the REPEAT (19/59)
button for a fourth time. “REPEAT” will disappear
from the display.
Note: Repeat play is disabled while the random
function is being used.
Intro
The Intro feature will allow the first 10 seconds of
each song on the disc to play.
1
Once a CD is inserted, press the INTRO (23/46)
button. The first song will start to play.
2
After 10 seconds, the next track will start to play.
3
Once you hear a song you want to listen to,
press the INTRO (23/46) button again. The
selected song will continue to play.
10
Auxiliary Inputs
Welcome
Thank you for purchasing the the Crosley iJuke
Deluxe (CR12-2). Before operating this unit, please
read this manual thoroughly and retain it for future
reference.
About This Manual
Instuctions in this manual describe the control
functions of the CR12-2.
Table of Contents
Control Locators
Unit Controls..........................
Remote Controls...................
4
5
Getting Started
Unpacking............................
Power Source......................
6
6
Basic Operation
General.................................
Radio Operation...................
6
7
iPod Operation
iPod Operation.....................
7
CD Operation
CD Operation...................
Programming........................
MP3 CD Operation.........
Search Play (For MP3 only).
Random and Repeat Play....
Intro.......................................
8
8
9
9
10
10
General
Connection Optional
Equipment............................
Troubleshooting Guide........
Warranty...............................
11
11
12
Control Locators
CD Operation
23
Unit Controls
24
25
1
2
3
MP3 CD Operation
4
22
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
15)
16)
17)
18)
19)
20)
21)
22)
23)
24)
25)
26)
27)
28)
29)
30)
31)
32)
33)
34)
35)
REMOTE SENSOR
STAND BY
EQ
POWER
FIND/ESP
FUNCTION
PLAY / PAUSE
CD/TUNER SKIP +
STOP
CD/TUNER SKIP OPEN/CLOSE
CD DRAWER
VOLUME DOWN
VOLUME UP
PROGRAM
PRESET-DOWN
RANDOM
PRESET-UP
REPEAT
BAND
BBS
LIGHT
INTRO
MUTE
LCD DISPLAY
SPEAKER
12V OUTPUT
AUX. IN
FM ANTENNA:300
LIGHTING SWITCH
(RELEASE / HOLD)
EXT. SPEAKER
SPEAKER INT. EXT. MIX
POWER PLUG
UNIVERSAL DOCK
REMOTE SENSOR
1
Press FUNCTION (6/65) until CD appears on
LCD display.
2
Press OPEN/CLOSE(11) to open the CD
drawer(12).
5
21
6
19
20
7
8
18
9
3
Place a CD in the CD drawer with the label
side facing up.
4
Press OPEN/CLOSE (11) again to close the
CD drawer. The total number of Albums/Folders
will be displayed on the upper part of the display.
The total number of tracks on the CD and in
the Albums/Folders will show on the left side
of the display. (For example, 10 folders with a
total of 100 tracks).
17
16
15
13
14
11
10
12
Search Play (For MP3 only)
1
Search by Track name:
Press FIND/ESP (5/39) once in stop or play
mode, on LCD display start to flash.
2
Use SKIP + (8/41) or SKIP- (10/42) to select the
letter (A-Z) that matches the first letter of the
track name you would like to find.
3
Once the correct letter is showing, press and
hold the SKIP+ (8/41) or SKIP- (10/42) button
for one second. This allows you to search through
all the songs starting with the selected letter.
4
Press SKIP+ (8/41) or SKIP- (10/42) to select
the track started with the selected letter(A-Z).
5
Press PLAY/PAUSE (7/44) to play the selected
track.
6
Press STOP (9/47) to stop playing the CD.
ESP
34
35
26
33
5
Press PRESET UP (18/40) or PRESET DOWN
(16/43) to select the desired album/folder.
6
Once the correct album/folder has been
selected, press the SKIP+ (8/41) or the SKIP(10/42) to select the desired track within the
selected album/folder.
7
Press PLAY/PAUSE (7/44) to begin playback.
Note: You can switch albums/folders at any
time during playback.
29
30
28
31
27
Search by Album name:
1 Press FIND/ESP(5/39) twice in stop or play
mode until “ALBUM” and appear on the LCD
display.
2
Press the SKIP+ (8/41) or SKIP- (10/42) button
to select the desired album/folder.
3
Hold the SKIP+(8/41)or SKIP- (10/42) for 1-2
seconds to enter the selected Album , “ALBUM”
will disappear on the LCD display.
4
Press SKIP+(8/41)or SKIP- (10/42) to select the
track in the selected Album.
**IF there are files in the foot directory, display will
show “Root” . Hold SKIP+(8/41)or SKIP- (10/42)
for 1-2 seconds until “ALBUM” disappear on the
LCD display. Then search the files in the root
directory by pressing SKIP+(8/41)or SKIP- (10/42).
32
4
9
CD Operation
Control Locators
1
Press FUNCTION (6/65) until CD appears on
LCD display.
2
Press OPEN/CLOSE (11) to open the CD drawer.
3
Place a CD in the CD drawer with the label side
facing up.
4
Up to 64 tracks can be programmed for play in any
desired sequence.
**The track must be programmed in the stop mode.
**The same track can be programmed more than
once.
1
Press OPEN/CLOSE (11) again to close the CD
drawer.
2
5
The total number of tracks and the total play
time will show on the display.
3
While the CD is stopped, press the PROGRAM
button (15/45). “00” will begin to flash on the
display. After a second, “Memory” and “000
P - - 01” will show on the display.
Press SKIP+ (8/41) or SKIP- (10/42) to select
the desired track you wish to program.
Press PROGRAM (15/45) to store the selected
track. “00” and “P--02” will be shown on the
display.
6
Press PLAY/PAUSE (7/44) to begin playback.
7
Press SKIP+(8/41) to go forward to the next
track.
4
Repeat steps 2 and 3 to program additional
tracks into memory..
8
Press SKIP- (10/42) to go backward to the
previous track.
5
Press PLAY/PAUSE(7/44) to begin playback of
the programmed tracks.
9
Press STOP (9/47) to stop playing the CD.
Note: If programming songs from MP3 CD’s
containing different albums/folders, you will first
have to select an album/folder. After pressing
PROGRAM, use the SKIP+ or SKIP- buttons to
select an album/folder and press the PROGRAM
button again to enter the album/folder. Once the
album/folder is selected, proceed with steps 25 above to program tracks into memory.
10 To pause during playback, press PLAY/PAUSE
(7/44). Press again to resume playback.
6
8
Remote Controls
Programming
CD Operation
36)
37)
38)
39)
40)
41)
42)
43)
44)
45)
46)
47)
48)
49)
50)
51)
52)
53)
54)
55)
56)
57)
58)
59)
60)
61)
62)
63)
64)
65)
POWER
AM/FM
AUX
FIND/ESP. MO./ST.
PRESET -UP
SCAN/SKIP +
SCAN/SKIP PRESET -DOWN
PLAY/PAUSE
PROGRAM
INTRO
STOP
4
3
6
0
9
8
7
5
2
1
RANDOM
REPEAT
VOLUME BBS
EQ
VOLUME +
MUTE
FUNCTION
36
37
38
39
65
64
63
40
62
41
61
42
60
59
58
44
43
45
46
47
57
48
55
50
49
56
51
54
53
52
Press PLAY/PAUSE (7/44) to begin playback
of the programmed tracks.
5
Basic Operation
Basic Operation
Unpacking
1
General
Remove packing materials from unit.
2
Remove plastic safety cover from A/C plug.
3
Remove tie from A/C cord
Power Source
1
2
Unwind the AC POWER CORD (33) at the back
of the unit and connect it to a power outlet.
Make sure the unit is plugged in correctly to an
AC outlet.
2
Press the POWER button (4) to turn on the main
power. This button should be left pressed in even
when the unit is not in use. If the main power is
turned off, all preset radio stations will be lost
and will have to be reprogrammed.
3
Press the STAND BY button (2) to turn on the
unit power. The STAND BY button should be
used to turn the unit on or off.
4
Once the Power is turned on, press the
FUNCTION button (6/65) to switch between
Tuner/CD/iPod/Aux.
5
While listening to any of the above functions, you
may change the tone of the music by pressing
the EQ button (3/62). Each press of the EQ button
will toggle between the following settings:
Plug A/C cord into appropriate outlet.
AC
Polarized Plug
PASS
Note: This product may be equipped with a
polaized alternating-current line plug (a
plug having one blade wider than the
other.) This plug will fit into the power
outlet only one way. This is a safety
feature. If you are unable to insert the plug
fully into the outlet try reversing the plug,
if the plug should still fail to fit, contact
your electrician to replace your obsolete
outlet. Do not defeat the safety purpose
of the polarized plug.
3
Install 2 AAA batteries (not included) in
remote control.
4
Plug A/C cord into appropriate outlet.
6
Radio Operation
1
Note: Save all packing materials.
6
CLASSIC
iPod Operation
ROCK
POP
1
Press FUNCTION (6/65) until TUNER appear
on the LCD display.
2
Press BAND (20) to select the desired turning
band: AM or FM.
3
Press and hold the SKIP+ (8/41) or SKIP (10/42) for one second to automatically tune into
to the next available station with a strong signal.
Repeat this procedure until the desired station
is reached.
4
To manually tune to a station, press SKIP+
(8/41) or SKIP- (10/42) repeatedly until the
desired stations is reached.
Note: For FM tuning, ((ST)) will show on the
LCD display when a stereo signal is
obtained.
iPod Operation
The iJuke features the Universal Dock(34) that uses
dock adapters that come with newer iPod models.
Before inserting your iPod, you will need to install
the correct dock adapter. By using the correct dock
adapter, you can insert any iPod with a dock
connector. If you have an older iPod model that did
not come with a dock adapter, they are available on
our website at www.crosleyradio.com or by calling
us at 1-866-Crosley. While docked, the iJuke will
also charge your iPod. To connect your iPod, follow
the steps below. If you’re iPod doesn’t have a dock
connector, you can connect it to the unit by using
the Auxiliary Cable that is supplied.
1
Press the power button to turn iJuke on.
2
Press the function(6/65) button until “iPod”
appears on LCD display.
Programming Stations
1
Press BAND (20) to select the desired turning
band: AM or FM.
2
Press SKIP+(8/41) or SKIP-(10/42) to tune to
the desired frequency.
3
Press “PROGRAM (15/45) , the “PROGRAM”
and “01” on LCD display will start flashing. The
current preset number will be displayed for
selection.
JAZZ
You can also enhance the bass sounds by using
the BBS feature. Press the BBS button (21) to
turn this feature on.
4
If you wish to store the radio station to another
preset number, press the PRESET-UP(18/40)
or PRESET-DOWN(16/43) to select the desired
preset number.
5
Press PROGRAM (15/45) on the unit again to
store the radio station. Repeat steps 3 to 6 to
store other preset radio stations.
6
Once all stations are programmed into memory,
use PRESET-UP (18/40) or PRESET-DOWN
(16/43) to select the programmed presets.
**If a button is not pressed within 5 seconds
during programming, the jukebox will
automatically exit program mode.
Note: A maximum of 10 radio stations for FM
and 10 for AM can be stored into memory.
Note: If your iPod does not have a dock connector, use
the supplied Auxiliary Cable and hook your iPod
to the Auxiliary Input (Aux In) jack on the back
of the unit.
3
Press the skip+(8/41) or skip-(10/42) button to
select the desired track.
4
Press the play(7/44) button to start playback.
5
Press the stop(9/47) button to stop the playback.
7