Crosley Radio CR12-3 Stereo System User Manual

WARRANTY
Crosley Radio Products are warranted against defects in material and workmanship
for a period of 180 days beginning from the date of sale to the original purchaser.
CR12-3
Should the unit fail under normal usage during the 180 day warranty period, a
request for RETURN AUTHORIZATION (R.A.) must be made by the original
customer before returning the unit. Call Deer Park Distributors customer service
for Return Authorization at (618) 427-3761 from 8:30 AM to 4:30 PM (Central
Time) Monday through Friday.
3CD Jukebox
Upon receiving the RETURN AUTHORIZATION number from the Customer
Service Department, properly pack your unit in its original packaging. Include any
adapters, parts, & accessories which were originally provided with the product,
along with a check or money order for $99.95 made out to Deer Park Distributors
to cover the handling and return postage. Display the R.A. # on the outside of the
carton and ship PREPAID via standard UPS or its equivalent.
Instruction Manual
SHOPAROUND
DEER PARK DISTRIBUTORS, LLC
ATTN: RETURNS DEPARTMENT
111 W. BIRCH STREET
BROWNSTOWN, IL 62418
DEER PARK DISTRIBUTORS assumes no responsibility for units sent without prior Return Authorization.
The purchaser’s bill of sale is the only proof of warranty entitlement and must accompany the unit.
The warranty does not cover damage due to acts of nature, accident, misuse, abuse, negligence, commercial
use or modification of, or to any part of the product. This warranty does not cover damage due to improper
operation or maintenance, connection to improper voltage supply, or attempted repair by anyone other than a
facility authorized by Crosley Radio to service the product. This warranty does not cover products sold AS IS
or consumables (such as fuses or batteries). This warranty is valid only in the United States.
This warranty gives the purchaser specified legal rights in addition to any rights which may vary from state to
state.
In accordance with the "Moss-Magnuson Warranty Act" of July 10, 1975, this is termed a "limited warranty"
which in no way compromises Crosley Radio‚ high standards of Quality and Workmanship.
910-255800-001
LIGHT
ON/OFF
POW
ER
ON/O
FF
CD Operation
Disc Selection
1
2
There is no Power
Press the PLAY/PAUSE BUTTON (22) to start
playback.
There is no Sound
1
Press the Program button (42) on the remote
control. The Program Indicator (23) will flash.
2
Press the forward skip (45) or backward skip
(46) to display the first track you want.
3
Troubleshooting
Press DISC SKIP - (13) or DISC SKIP + (12) to
select the desired disc, the DISC INDICATOR (25,
26, 27) will flash.
CD Program
Press the Program button (42) again to
memorize the track.
4
Repeat steps 2 and 3 above to program other
tracks.
5
Press the Play/Pause button (22/40) to start
programmed playback.
6
To clear programmed tracks from memory, press
the Open/Close button or turn power off.
Notes: Program, Repeat and Random can only be
set for a single disc.
A maximum of 19 tracks can be programmed.
IMPORTANT SAFETY INSTRUCTION
General
1
Make sure the AC cord is plugged in correctly.
1
Check the volume level by turning the volume
knob.
2
Check that the INT/EXT Speaker Switch is in
the INT. position. If you are using external
speakers, make sure its in the EXT. position.
CD does not play
1
Check to make sure CD is inserted correctly
(label side facing up).
2
Check that the surface of the CD is clean
3
Make sure function switch is set to CD.
1.
2.
3.
4.
5.
PLEASE READ CAREFULLY ALL THE FOLLOWING IMPORTANT SAFEGUARDS
THAT ARE APPLICABLE TO YOUR EQUIPMENT
Read Instructions - All the safety and operating instructions should be read before the product is operated.
Retain instructions - The safety and operating instructions should be retained for future reference.
Heed Warnings - All warnings on the product and in the operating Instructions should be adhered to.
Follow Instructions - All operating and use instructions should be followed.
Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use
a damp cloth for cleaning.
6. Attachments - Do not use attachments not recommended by the product manufacturer as they may cause hazards.
7. Water and Moisture - Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub; in a wet basement; or near a swimming pool; and the like.
8. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven
surfaces may cause the product and cart combination to overturn.
9. Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable
operation of the product and to protect it from overheating, and these openings must not be blocked
or covered, The openings should never be blocked by placing the product on a bed, sofa, rug, or
other similar surface. This product should not be placed in a built - in installation such as a bookcase
or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.
10. Power Sources - This product should be operated only from the type of power source indicated on the marking label,
if you are not sure of the type of power supply to your home. Consult your product dealer or local power company. For
products intended to operate from battery power, or other sources, refer to the operating instructions.
11. Grounding or Polarization - This product may be equipped with a polarized alternating-current line plug (a plug having
one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet try reversing the plug, If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
12. Power - Cord Protection - Power - supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them, paying particular attention to
cords at plugs, convenience receptacles, and the point where they exit from the product.
AC
13. Lightning - For added protection for this product during a lightning storm, or when it is left
Polarized Plug
unattended and unused for long periods of time, unplug it from the wall outlet and disconnect
the antenna or cable system. This will prevent damage to the product due to lightning and power - line surges.
14. Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
15. Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result
in a risk of fire or electric shock.
16. Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch
dangerous voltage points or short - out parts that could result in a fire or electric shock. Never spill liquid of any kind
on the product.
17. Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
18. Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel
under the following conditions;
a. When the power-supply cord or plug is damaged.
. If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating instructions. Adjust only those controls that
are covered by the operating instructions as an improper adjustment of other controls may result in damage and
will often require extensive work by a qualified technician to restore the product to its normal operation.
e. If the product has been dropped or damaged in any way.
f. When the product exhibits a distinct change in performance - this indicates a need for service.
19. Replacement Parts - When replacement parts are required, be sure the service technician has used replacement
parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions
may result in fire, electric shock, or other hazards.
20. Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety
checks to determine that the product is in proper operating condition.
21. Wall or ceiling Mounting - The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
22. Heat - The product should be situated away from heat sources such as radiators. Heat registers, stoves, or other
products (including amplifiers) that produce heat.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
8
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful intereference to radio or
television reception, which can be determined by turning the equipment off and on , the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio TV technician for help.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE. DO NOT REMOVE COVER.
PILOT LAMPS SOLDERED IN PLACE. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CAUTION
CD Operation
Playing a CD
1
Rotate the FUNCTION SWITCH (7) to the CD
position.
2
Press the OPEN/CLOSE BUTTON (19) to
open the CD DRAWER (3). Choose your
selected disc tray by sliding the CD tray manually,
and then place a disc in the tray with labeled
side of the disc facing up.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lighting flash with
arrowhead symbol, within
an equilateral triangle, is
intended to alert user to
the presence of uninsulated
"dangerous voltage" within
the product's enclosure
that may be of sufficient
magnitude to constitute
risk of electric shock
to persons.
CAUTION: TO REDUCE
THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE
COVER (OR BACK). NO
USER - SERVICEABLE
PARTS INSIDE. REFER
SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point
within an equilateral
triangle is intended to
alert user to the
presence of important
operating and
maintenance (servicing)
instruction in the
literature accompanying
the appliance.
3
4
CAUTION
For Compact Disc Units Only:
INVISBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED
OR DEFEATED. AVOID DIRECT EXPORSURE TO LASER BEAM.
Specification
Frequency Range
Power Supply
Power Consumption
Antenna
Speaker
:
:
:
:
:
AM 525 - 1710 KHz
FM 87.5 - 108.5 MHz
AC 120V ~ 60Hz
100W
Internal antenna for FM
built in ferrite bar for AM
: 6 1/2” Dynamic type X 2
: 2 1/2” Tweeter type X 2
* DESIGN AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
Press the OPEN/CLOSE BUTTON (19) again to
close the CD DRAWER (3). The display will show
“-- for a few seconds, then the total number of
tracks on the disc will be displayed. If there’s no
disc in tray 1, the unit will move to the next tray.
“00” will be shown on the display if there is no
disc loaded in any of the CD Drawers.
To repeat all tracks, press the PLAY/PAUSE
BUTTON (22) to start the CD. Press the
REPEAT BUTTON (20) twice to repeat all
tracks and LED will on. Once the CD ends, it will
start over again from the beginning of the CD.
3
To erase the repeat function, press the REPEAT
BUTTON (20).
Skip Forward And Reverse
1
Press the FORWARD SKIP BUTTON (14) or
the BACKWARD SKIP BUTTON (15) to select
a track.
2
Press the PLAY/PAUSE BUTTON (22) to start
playing the selected track
Press the PLAY/PAUSE BUTTON (22) to start
playback. The PLAY/PAUSE INDICATOR (17)
will light up.
5
Adjust the VOLUME KNOB (10) to the desired
volume level.
6
To pause playback, press the PLAY/PAUSE
BUTTON (22). The PLAY/PAUSE INDICATOR
(17) will flash. Press the PLAY/PAUSE BUTTON
(22) again to resume playback.
7
2
Search Forward And Reverse
1
Press and hold the FORWARD SKIP BUTTON
(14) or the BACKWARD SKIP BUTTON (15) to
search forward or backward through the selected
track.
2
Release the button at the desired point, playback
will resume automatically.
To stop playback, press the STOP BUTTON (21)
and the PLAY/PAUSE INDICATOR (17) will go
off.
Repeat Playback
1
To repeat a single track, choose the track that
you want to repeat, then press the PLAY/PAUSE
BUTTON (22) to start the track. Press the
REPEAT BUTTON (20) once to repeat this
track and LED will flash.
7
Getting Started
RADIO Operation
Radio Operation
Set Up
1
Untie the AC Power Cord (30) at the back of the
unit.
2
Remove Plug safety cover on the prongs of the
plug.
3
Rotate the FUNCTION SWITCH (7) to the
Tuner position.
2
Rotate the TUNING BAND SWITCH (8) to the
desired tuning band.
3
Select the desired radio station by rotating
TUNING KNOB (9).
Plug the AC cord into an appropriate outlet.
AC
Polarized Plug
4
1
This product is equipped with a polarized
alternating current line plug (a plug having one
blade wider than the other). This plug will fit into
the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully
into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the
purpose of the polarized plug.
4
Adjust the VOLUME KNOB (10) to the desired
sound level.
BBE Function
1
- To enhance the sound quality, press
the BBE ON/OFF switch (6) to activate the
function.
6
Welcome
Thank you for purchasing the Crosley Jukebox
(CR12-3). Before operating this unit, please read
this manual thoroughly and retain it for future
reference.
Table of Contents
Getting Started
Control Locators....................... 4 - 5
Set up ....................................... 6
About This Manual
Radio
Instructions in this manual describe the control
functions of the CR12-3.
AM/FM Tuning ........................ 6
BBE Function ......................... 6
CD Player
Playing a CD ............................ 7
Repeat Playback .................... 7
Skip Forward And Reverse .... 7
Search Forward
And Reverse .......................... 7
Disc Selection ........................ 8
Programmable CD Player .... 8
General
Troubleshooting Guide ............. 8
Warranty ................................... 10
Control Locators
Control Locators
Unit Controls
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
LIGHT POWER SWITCH
POWER BUTTON
CD DRAWER
SPEAKER
TUNER DIAL
BBE ON/OFF
FUNCTION SWITCH
TUNING BAND SWITCH
TUNING
VOLUME CONTROL
TONE CONTROL
DISC SKIP +
DISC SKIP FORWARD SKIP
BACKWARD SKIP
SENSOR
PLAY/PAUSE INDICATOR
REPEAT INDICATOR
OPEN/CLOSE
REPEAT
STOP
PLAY/PAUSE
PROGRAM INDICATOR
RANDOM INDICATOR
DISC 3 INDICATOR
DISC 2 INDICATOR
DISC 1 INDICATOR
LED DISPLAY
Unit Controls
SHOPAROUND
1
LIGHT
ON/OFF
2
3
POW
ER
ON/O
FF
4
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
40.
41.
42.
43.
44.
45.
46.
47.
LINE IN
Int./Ext. SPEAKER SWITCH
EXT. SPEAKER
AC POWER CORD
OPEN/CLOSE
VOLUME DOWN
DISC 2
DISC 1
DISC SKIP +
DISC SKIP STOP
PLAY/PAUSE
REPEAT
PROGRAM
VOLUME UP
DISC 3
FORWARD SKIP
BACKWARD SKIP
RANDOM
31
30
29
R+
L+
R-
L-
SPEAKER
INT. EXT.
32
6
5
OPEN/CLOSE
TUNER
LINE
CD
7
33
8
9
10
28 26
27 25
23
38
24
12
13
14
15
22
DISC SKIP+
PLAY PAUSE
DISC1 DISC2 DISC3
/
STOP
F.SKI P
REPEAT
SENSOR
B.SKI P
VOL
34
11
36
21
20
19
40
35
+
UME
43
C3
2 DIS
DISC
ISC1
D
44
IP
SK
+ F.
DISC
37
DISC
39
/ STO
PLAYSE
PAU
45
IP
41
.SK
P B
P.
. RE
G
PRO
46
.
RAN
47
42
OPEN/CLOSE
16
4
EXT.
SPEAKER
LINE IN
R
L
17 18
5