Instruction manual | Crosley Radio CR79 Speaker System User Manual

WARRANTY
Crosley Radio Products are warranted against defects in material and workmanship
for a period of 90 days beginning from the date of sale to the original purchaser.
Should the unit fail under normal usage during the 90 day warranty period, a
request for RETURN AUTHORIZATION (R.A.) must be made by the original
customer before returning the unit. Call Crosley Radio customer service for
Return Authorization at (502) 583-4246 from 9 AM to 5 PM (EST) Monday to
Friday.
CR79
The Entertainer with Recorder
Upon receiving the RETURN AUTHORIZATION number from the Customer
Service Department, properly pack your unit in its original packaging. Include
any adapters, parts, & accessories which were originally provided with the
product, along with a check or money order for $19.95 made out to Crosley
Radio to cover the handling and return postage. Display the R.A. # on the
outside of the carton and ship PREPAID via standard UPS or its equivalent.
Instruction Manual
ATTN: RETURNS DEP'T
2001 PRODUCTION DRIVE
BAY 2 & 3
LOUISVILLE, KY 40299
CROSLEY RADIO assumes no responsibility for units sent without prior Return Authorization.
The purchaser’s bill of sale is the only proof of warranty entitlement and must accompany the unit.
The warranty does not cover damage due to acts of nature, accident, misuse, abuse, negligence, commercial
use or modification of, or to any part of the product. This warranty does not cover damage due to improper
operation or maintenance, connection to improper voltage supply, or attempted repair by anyone other than
a facility authorized by Crosley Radio to service the product. This warranty does not cover products sold AS
IS or consumables (such as fuses or batteries). This warranty is valid only in the United States.
This warranty gives the purchaser specified legal rights in addition to any rights which may vary from state
to state.
In accordance with the "Moss-Magnuson Warranty Act" of July 10, 1975, this is termed a "limited warranty"
which in no way compromises Crosley Radio‚ high standards of Quality and Workmanship.
IMPORTANT SAFETY INSTRUCTION
PLEASE READ CAREFULLY ALL THE FOLLOWING IMPORTANT SAFEGUARDS
THAT ARE APPLICABLE TO YOUR EQUIPMENT
1.
2.
3.
4.
5.
Read Instructions - All the safety and operating instructions should be read before the product is operated.
Retain instructions - The safety and operating instructions should be retained for future reference.
Heed Warnings - All warnings on the product and in the operating Instructions should be adhered to.
Follow Instructions - All operating and use instructions should be followed.
Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use
a damp cloth for cleaning.
6. Attachments - Do not use attachments not recommended by the product manufacturer as they may cause hazards.
7. Water and Moisture - Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub; in a wet basement; or near a swimming pool; and the like.
8. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven
surfaces may cause the product and cart combination to overturn.
9. Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable
operation of the product and to protect it from overheating, and these openings must not be blocked
or covered, The openings should never be blocked by placing the product on a bed, sofa, rug, or
other similar surface. This product should not be placed in a built - in installation such as a bookcase
or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.
10. Power Sources - This product should be operated only from the type of power source indicated on the marking label,
if you are not sure of the type of power supply to your home. Consult your product dealer or local power company. For
products intended to operate from battery power, or other sources, refer to the operating instructions.
11. Grounding or Polarization - This product may be equipped with a polarized alternating-current line plug (a plug having
one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet try reversing the plug, If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
12. Power - Cord Protection - Power - supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them, paying particular attention to
cords at plugs, convenience receptacles, and the point where they exit from the product.
AC
13. Lightning - For added protection for this product during a lightning storm, or when it is left
Polarized Plug
unattended and unused for long periods of time, unplug it from the wall outlet and disconnect
the antenna or cable system. This will prevent damage to the product due to lightning and power - line surges.
14. Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
15. Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result
in a risk of fire or electric shock.
16. Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch
dangerous voltage points or short - out parts that could result in a fire or electric shock. Never spill liquid of any kind
on the product.
17. Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
18. Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel
under the following conditions;
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating instructions. Adjust only those controls that
are covered by the operating instructions as an improper adjustment of other controls may result in damage and
will often require extensive work by a qualified technician to restore the product to its normal operation.
e. If the product has been dropped or damaged in any way.
f. When the product exhibits a distinct change in performance - this indicates a need for service.
19. Replacement Parts - When replacement parts are required, be sure the service technician has used replacement
parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions
may result in fire, electric shock, or other hazards.
20. Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety
checks to determine that the product is in proper operating condition.
21. Wall or ceiling Mounting - The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
22. Heat - The product should be situated away from heat sources such as radiators. Heat registers, stoves, or other
products (including amplifiers) that produce heat.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful intereference to radio or
television reception, which can be determined by turning the equipment off and on , the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio TV technician for help.
WARNING:
General
Trouble Shooting
Turntable will not work
There is no power
1
Make sure AC Plug is plugged in correctly.
2
Look at the STANDBY light and check to see if
it is red and LCD displays on the screen..
3
Then press the POWER button. It will turn on
the set and LCD back light will on.
There is no sound
1
Make sure the mute function is turned off.
2
Check that the volume is turned up by pressing
VOL+ button on the control panel or on the
remote.
Note: Volume range on some units start at level
15 and ends at level 40.
3
Make sure ext./int. switch on back of radio is
on int. (unless you are using external speakers,
in which case it should be on ext.)
4
Check to make sure power is turned on.
CD does not play
1
Check that the unit is in PHONO mode.
2
Try moving the tone arm to the right until you
hear a click.
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE. DO NOT REMOVE COVER.
PILOT LAMPS SOLDERED IN PLACE. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CAUTION
Control keys will not work
1
RISK OF ELECTRIC SHOCK
DO NOT OPEN
If the control keys will not work after lighting or
power-Line surges, unplug the AC plug to reset
the unit.
The lighting flash with
arrowhead symbol, within
an equilateral triangle, is
intended to alert user to
the presence of uninsulated
"dangerous voltage" within
the product's enclosure
that may be of sufficient
magnitude to constitute
risk of electric shock
to persons.
CAUTION: TO REDUCE
THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE
COVER (OR BACK). NO
USER - SERVICEABLE
PARTS INSIDE. REFER
SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
For Compact Disc Units Only:
INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED
OR DEFEATED. AVOID DIRECT EXPORSURE TO LASER BEAM.
1
Check to make sure CD is inserted correctly
(label side facing up).
2
Check to see that surface of CD is clean.
3
Specification
Make sure the unit is on CD mode by pressing
CD on the control panel.
Frequency Range
Remote not working
1
Replace batteries.
2
Be sure to point the remote towards remote
sensor when operating.
3
Remove obstacles in the path of the remote and
the unit so the remote signal has a straight
path to the unit.
21
The exclamation point
within an equilateral
triangle is intended to
alert user to the
presence of important
operating and
maintenance (servicing)
instruction in the
literature accompanying
the appliance.
Power Consumption
Antennas
Power Source
Speaker
Speaker Wattage
Speaker ohms
Output ohms
Output Wattage
:
:
:
:
:
:
:
:
:
:
:
AM 520 - 1710 KHz
FM 87.5 - 108 MHz
18 Watts
External FM antenna
Built-in ferrite AM bar
AC 120V ~ 60 Hz
4” Dynamic type X 2
5 Watts
8 ohms
8 ohms
2 Watts per channel
* DESIGN AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
Welcome
Thank you for purchasing the Crosley The Entertainer
with Recorder (CR79). Before operating this unit,
please read this manual thoroughly and retain it for
future reference.
Getting Started
About This Manual
Basic Operation
Instructions in this manual describe the control
functions of the CR-79 along with the functions of
the remote control.
Logic Deck
Table of Contents
Control Locators........................................ 4-5
Unpacking.................................................. 6
Set Up........................................................ 6
Power Up Your Crosley............................. 7
Functions................................................... 7
Timer-On Syn. Record
A
After set the target timer-on time, source selection
menu will show for selecting the sync. record
source.
Beat-Cut
A Press “BEAT” to change the recording oscillator
B
CD, TUNER and AUX/PHONO source can be
selected
Notes:1) Beat-cut only can change in TUNER Mode
C
After selected the sync. record source, the
“SYNC” icon will show up
Clock Operation
Clock Operation.........................................
Sleep Operation.........................................
Timer-On Operation..................................
Timer-Off Operation..................................
8
8
9
10
CD Player
CD Door Open / Close...............................
Play............................................................
Remain time display..................................
Pause........................................................
Stop...........................................................
FF/FB and FS/BS.....................................
11
11
11
12
12
12
CD Player & Connecting Optional Equipment
2) Tape must in logic deck
Load Preset channel.................................
Save preset...............................................
Mono / Stereo............................................
Signal..........................................................
16
16
16
16
Beat-Cut A
Beat-Cut B
press “BEAT”
press “MODE” to TIMER-ON SETTING mode
press “BEAT”
ENTER TO
HOUR - ADJ mode
press “CLK-ADJ”
Turntable & Radio
15
15
15
15
frequency
Notes:
1) Tape must recordable
Program..................................................... 13
Random / Repeat ...................................... 14
Setting turntable speed.............................
Playing a record........................................
Manual Tuning..........................................
Auto Tuning...............................................
Beat-cut
ENTER TO
MINUTE - ADJ
mode
press”FF”/”FB” to target
and then “CLK-ADJ”
Warning
When AC main power is off at tape PLAY/REC
Mode, the Tape will be locked and the tape door
can not be opened. It should be released by REW
key or PLAY key with power on before opening the
tape door.
Radio
enter to source
selection
press”FF”/”FB” to
select source(CD/Tuner/Aux)
for Sync-Rec only
E.g. Select CD
assyn. Rec source
press”FF”/”FB” to
select CD and then
“CLK-ADJ”
Logic Deck
Play.............................................................
Stop............................................................
Phono Mode manual recording.................
Tuner mode manual record.......................
CD mode manual record (Normal Play)...
FWD/REW.................................................
Recording/Earsing....................................
CD mode manual record (Pause)............
Timer-on Syn. record................................
Beat-cut.....................................................
Warning.....................................................
17
17
17
17
18
18
19
19
20
20
20
Timer -On Syn. Rec Sec
General
Trouble Shooting....................................... 21
20
Logic Deck
Control Locators
1
CD Mode Manual record (Pause)
Recording/Erasing
Tape Mode manual recording
A In STOP MODE, press and hold “TAPE REC”
A
In STOP mode, press and hold “TAPE REC”
2 sec to start the recording processes
2 sec to start the recording processes
B
Notes:
1) Tape must recordable
C
2) Tape must in stop mode
Press “REC” key for Pause mode during
recording.
Press REC/PAUSE mode will release and
resume recording.
3) Within the 2 sec key holding time, the “REC”
icon will flash
Notes:
1) Tape must recordable
4) During recording mode, FWD/REW/PLAY cannot
execute
2) Tape must in STOP mode
5) If recording is performed in TAPE mode, the
tape erasing process is executed
In TAPE Mode
3) Within the 2 sec key holding time, the “REC”
icon will flash
4) During recording mode, FWD/REW/PLAY cannot
execute
CD Mode Tape Recording
(Playing CD)
Ready to REC
press”TAPE REC”
(hold 2s)
Tape Starts
recording
Tape Starts REC
press “TAPE REC”
(hold 2s)
2
3
4
5
6
7
8
Unit Controls
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
CD-Play / Pause
Phono
Tuner / Band
Remote Sensor
LCD Display
Backward Skip/ Search (CD / Tuner)
Forward Skip/ Search (CD / Tuner)
Prog / Clk - adj
Random/ Preset Repeat / Preset +
Standby Indicator
Remain / Mode
Power
CD Door
Intro / Mono / Stereo
Equalizer (EQ)
Timer / Sleep
Control Panel
Open/ Close
CD Stop
Signal (For Radio)
Beat Cut (For Radio)
Mute
Volume Down
Volume Up
Turntable
Spindle
Adapter For 45 rpm Records
Tone Arm
Speed Control Switch
Arm Rest
Needle
AC Power Cord
External FM Antenna
Speaker Internal/ External Switch
Speaker Jack
Tape Play
Tape Stop
Tape Rewind
Tape Forword / Rec Counter
Rec / Rec Pause
Cassette Door
15
16
17
10
9
11
12
18
13
14
19
20
21
22
23
24
25
26
28
29
30
27
31
32
35
36
33
34
42
TAPE/PLAY
19
STOP
REW
FWD
REC
37 38 39 40 41
4
Control Locators
Logic Deck
Remote Controls
CD Mode Tape Recording (Playing CD)
TUNER Mode Tape Recording
POWER
43
MUTE
44
0
1
45
2
3
4
5
46
6
7
8
9
REC
TIME/SLEEP
SNOOZE
REW
FWD
STOP
47
48
CD
PLAY
PHONO
TAPE
PLAY
TUNER
BAND
49
50
51
52
53
54
55
INTRO/MO.ST
RANDOM
PS
REPEAT
PS
PROG./
CLK-ADJ
CD/STOP
EQ
VOL.
UP
B.FWD
CD
TUNER
F.FWD
VOL.
DOWN
56
57
58
59
60
61
62
63
64
65
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
Power
Mute
Number 0,1-9
Rec (Tape Pause)
Rew
Phono
CD Play
Intro / Mono / Stereo
Random / PSProg. / CLK-ADJ
CD / Stop
B.FWD (CD/TUNER)
Vol Down
Snooze
Time / Sleep
Stop
FWD ( Rec Tape Counter)
Tuner / Band
Tape Play
Repeat / PS +
EQ
Vol Up
F.FWD (CD/TUNER)
Tape starts
Recording
Press”TAPE REC”
(hold 2s)
Tape Starts
recording
FWD/REW
CD Mode Manual record (Normal Play)
SYNC RECORDING AT THE
BEGINNING OF THE SONG
1) Play the song that you want to record at CD
mode.
2) Press and hold “TAPE REC” key 2 sec. to start
the recording process
press “ TAPE REC”
(hold 2s)
A
In STOP/PLAY mode, press forward or rewind
operation
Notes: 1) FWD/REW can execute in
TUNER/CD/PHONO/ TAPE mode
In TAPE Mode
3) The CD will go back at the beginning of the
song. And start to recording.
SYNC RECORDING AT ANY POSITION
OF THE CD
press “TAPE FWD”
Tape starts FWD
1) During CD playback press “CD PLAY/PAUSE”
key to pause at the position that you want to
record.
2) Press and hold “TAPE REC” key 2 sec to start
the recording process position.
In TAPE Mode
Notes:
1) Tape must recordable
2) Within the 2 sec key holding time, the “REC”
icon will flash
press “TAPE REW”
Tape starts REW
3) During recording mode, FWD/REW/PLAY cannot
execute
4) Press “TAPE FWD” to change the LCD display
to show tape counter display during recording.
5) Press “TAPE REC” Key for PAUSE mode, the
“REC” icon will flash on the LCD display
5
18
Logic Deck
Getting Started
Press the “TAPE/PLAY” button to enter logic deck
mode.
A
a) In STOP/FWD/REW mode, press “TAPE PLAY”
to start tape play
Notes:
1) Tape must recordable
Notes: 1) Play only can perform in TAPE mode
In TAPE Mode
Start to play
press “TAPE PLAY”
In Stop mode, press and hold “TAPE REC” 2sec
to start the recording processes
Remove packing materials from unit.
2
Remote control is located in the outside of the
styrofoam packaging.
3) Within the 2 sec key holding time, the “REC”
icon will flash
3
Remove plastic bag covering radio and remote
control.
4) During RECORDING mode, FWD/REW/PLAY.
2) Tape must in Stop mode
4
Remove plastic safety cover from A/C plug.
5) Press “TAPE FORWORD” to change the LCD
display to show tape counter display during
Recording.
5
Remove tie from A/C cord and untie antenna
wire on back of radio.
6) Press “TAPE REC” Key for Pause mode, during
Recording and the “REC” icon will flash on the
LCD display Phono Mode Tape recording
6
Open lid and remove styrofoam shipping
material from turntable.
7
Remove black tie-wrap from under the tone
arm.
8
Remove white protective needle cover by gently
pulling towards the front of the unit.
In PLAY/REC/FWD/REW mode, press “TAPE
STOP” to perform stop operation
Tape Starts
Recording
press “TP_REC”
(hold 2s)
Notes: 1) From tape recording to STOP mode,
the “REC” icon will turn-off
A
1
Set Up
1
Install 2 AAA batteries (not included) in remote
control.
2
Plug A/C cord into appropriate outlet.
Note: Save all packing materials.
Stop
A
Unpacking
Phono Mode manual recording
Play
AC
Polarized Plug
Note: This product may be equipped with a
polarized alternating-current line plug (a
plug having one blade wider than the
other.) This plug will fit into the power
outlet only one way. This is a safety
feature. If you are unable to insert the plug
fully into the outlet try reversing the plug,
if the plug should still fail to fit, contact
your electrician to replace your obsolete
outlet. Do not defeat the safety purpose
of the polarized plug.
3
Untie the FM antenna and allow it to hang down
in a straight line for optimum FM reception. If
you have trouble tuning in an FM station, move
the external FM antenna for best reception. Do
not connect FM antenna to outside antenna.
In Stop mode, press “TAPE STOP” to reset the
tape counter
In TAPE Mode (PLAY/FF/REW)
Tuner Mode manual record
Tape Stopped
A
PLAY/FF/REW
to stop
Press “TAPE STOP” Reset tape
counter
In Stop mode, press and hold “TAPE REC” 2
sec to start the recording processes
Notes:
Press “TAPE STOP”
1) Tape must recordable
2) Tape must in stop mode
3) Within the 2 sec key holding time, the “REC”
icon will flash
FM Antenna
4) During RECORDING mode, FWD/REW/PLAY
cannot execute
17
6
Radio
Basic Operation
Powering Up Your Crosley
Your new Crosley is equipped with a POWER /
STANDBY button. Press the POWER / STANDBY
button on either the front of the unit or on your remote
control. The Standby light will turn from red to green.
When turned off, the standby light will turn red.
During standby mode, all presets will remain
programmed in your unit.
Functions (cont.)
Load Preset Channel
Function Select
1
Press the “TUNER/BAND” button to enable the
AM/ FM tuning function. When in TUNER mode,
the LCD will display the band (AM/FM), and the
station frequency.
Receiving tuning frequency display
Functions
Electronic Volume Control
1
Press the “VOL+” button to increase the volume.
The volume level will be shown in the LCD
display. Electronic volume control display
Load up and down correspond to “PS+” and “PS-”
key, respectively.
A
Press “PS+” or “PS-“ to recall preset channel
Notes: 1) the current display frequency will not be
kept during above operation.
Press the “CD” button to set to CD mode. When
first set to CD mode, the display will search for
CD and track information.
After reading display
CD TOC reading display
A
Press “MO/ST” to toggle the type of FM signal.
Notes: 1. Only for FM band
2. If stereo signal is too weak, ‘STEREO’
icon will not appear. Press this key
change to Mono mode. The reception
may be improved.
Preset channel_2
loaded
In FM band
2
Mono/Stereo
In FM band
(Current mode
=Stereo)
Preset “PS+”
to target preset
channel
Change to
MONO mode
Save Preset
press “MO/ST”
Channel number select up or down correspond to
“PS+” and “PS-” key, respectively.
Note: Volume range for this units start at level
0 and end at level 40.
2
Press the “VOL-” button to decrease the volume.
3
Press and hold either the “VOL+” or the
“VOL-” button to continuously increase or
decrease the volume. The volume will continue
to increase or decrease until the button is
released.
4
3
Press the “PHONO” button to set to PHONO
mode. When in PHONO mode, the display will
PHONO display
read “PHONO”.
a) In TUNER mode, choose a station that you want
to save. Press “PROG” to enter programming
mode.(--) will flash.
b) Press “PS+” or “PS-“ to desired preset number
(e.g. channel-10).
4
Press the “MUTE” button to set the volume to
0.
Press the “MUTE” button again to return to the
previous volume level.
Press the “TAPE” button to set to CASSETTE
mode. The display will read “COUNTER” when
in cassette mode.
press “MO/ST”
Signal
c) Press “PROG” to save that station.
A high-pitched noise called BEAT is sometime heard
during reception of radio broadcast.
d) Repeat above procedure.
A
Notes: 1) The original preset of channel-2 will not
be changed during above operation.
Press “SIGNAL”
until find a best
quality of signal.
In FM band
TAPE mode display
In FM band without preset channel
In FM band with preset channel
choose 1st
method
press”Signal”
choose 2nd
method
press”Signal”
Equalizer
1
This unit has a built in equalizer. The equalizer
fine tunes the sound according to the type of
music you like. Pressing the EQ button results
in the following changes:
enter to PRESET
SETTING mode
press “PROG”
press “PROG”
FLAT
CLASSIC
ROCK
POP
Jazz
Channel number
selection
end of prest
Equalizer “ROCK”
press “PS+/PS-”
to a desired
channel number
choose best sound
quality after 3sec
waiting
press
“PROG”
7
16
Turntable & Radio
Clock Operation
Setting Turntable Speed
1
2
Press the “PHONO” button on the control panel
to set the turntable mode. If playing a 45
rpm record, use the 45 rpm adapter supplied
with the turntable.
Use the speed selector on the turntable to set
the rpm to the appropriate speed for the selected
record.
Manual Tuning
Press the “TUNER/BAND” button to enable the
AM/FM tuning function.
Tune-up and tune-down correspond to “FF” and
“FB” key, respectively.
A
Notes 1) The memory of preset channel-2 will not
be changed during above operation.
Playing a Record
1
2
3
Press “FF” or “FB” and then release key within
1 sec.
In FM band
First, remove the white protective needle cover.
Gently lift the tone arm off its rest.
Tune-up
Move the tone arm slowly to the right side until
you hear a click. The turntable should start
turning once the click is heard.
press”FF” and
then release
within 1sec
Clock Operation
Assume the system is OFF.
Sleep time step change for each pressing:
A
Press “CLK-ADJ”, enter to hour ADJUSTMENT
mode.
00
B
Press “FF / FB” to set hour. (e.g 8:00am ->
10:00pm).
A
C
Press “CLK-ADJ”, enter to minute ADJUSTMENT
mode.
Notes:
1) When count-down time reaches zero, the system
will automatically turn OFF.
D
Press “FF” or “FB” to set minutes. (e.g 10:39pm
-> 10:45pm).
E
Press “CLK-ADJ”, finish clock adjustment.
Notes:
1) 12 / 24 hour display mode can be adjusted during
hour or minute adjustment mode by using
“TIMER”.
At the end of the record, the turntable will stop
turning.
5
Lift the tone arm from the record and return it
to the arm rest.
cancel sleep function
non-zero
sleep function activate
Press “SLEEP” to desired time for count-down.
10
20
30
40
50
00
90
80
70
60
CD Stopped
Under CLCOK mode
Move the tone arm to the left and lower it gently
onto the record to start playing.
4
Sleep function
Auto Tuning
enter to Houradjustment
press’Sleep”
(X3)
press “CLK-ADJ”
Tune-up and tune-down correspond to “FF” and
“FB” key, respectively.
B
C
Sleep function
activate
Hold “FF” or “FB” over 1 sec and then release
it at any time.
enter to Minuteadjustment
press “FF/FB” to
traget timer then
“CLK-ADJ”
end of adjustment
press “FF/FB” to
traget timer then
“CLK-ADJ”
After key release,, the auto-tuning operation will
start until find a station.
Notes: 1) The memory of preset channel-2 will not
be changed during above operation.
enter to MinuteAdjustment with
24-HOUR mode
In FM band
Auto Tune-up
15
Sleep Operation
press”FF” over
1sec
You can store up to 24 FM stations and 16 AM
station into the preset memory.
end of adjustment
press “TIMER” to
change HOURDISPLAY mode
press “FF/FB” to
traget timer then
“CLK-ADJ”
8
Clock Operation
CD Player & Connecting Optional Equipment
Timer-On Operation
Repeat
CD stopped
A
Example: “Set Timer-On for 7:05 am.”
A
Press “MODE” to timer-on display mode.
B
Press “CLK-ADJ” to enter to timer-on hour
adjustment mode.
C
Press “FF / FB” to set desired hour. (e.g.12:00am
7:00am )
Press “TIMER” to deactivate (both icons
flash) or activate (only ‘Timer’ flash ) Timeron function.
Timer-on function activated
D
Press “CLK-ADJ” to enter to timer-on minute adjustment mode.
E
Press “FF / FB” to set desired minute. (e.g.
7:00am 7:05am )
F
Press “CLK-ADJ” to enter to recording source
mode.
G
For Non-Timer-Recording, select ‘No-Src’. If
Timer-Recording require select a particular
source (CD/TUNER/PHONO).
H
enter to
PROGRAM mode
press”PROG”
To repeat playback of a single track or the whole
disk, press the “REPEAT” button. Pressing this
button once will repeat only the selected track and
a flashing "REPEAT" will appear on the display.
Pressing the “REPEAT” button twice will repeat the
whole CD when it reaches the end and repeat will
appear but will not flash. Pressing “REPEAT” a third
time will turn off the repeat function.
One track repeat (flashing)
deactivate
Timer-on function
press”PROG”
enter to
PROGRAM mode
press”PROG”
Optional External Speakers
press”PROG”
enter to
RE-PROGRAM
mode
1
press”FF OR FB”
2
Press “CLK-ADJ” to return to timer-on display
mode with activation of Timer-on function.
press”MODE” to Timer-on
setting
press”PROG”
3
Random
enter to
HOUR-ADJ mode
enter to
MINUTE-ADJ
mode
All track repeat
press”TIMER”
With your new radio, you have the option of
adding external speakers.
The speaker jacks for external speakers are
located on the back of the radio. Along with the
speaker jacks is a switch labeled int./ ext. When
using external speakers, this switch must be
switched to the ext. position. Doing this turns off
the internal speakers in the radio and redirects
the power to the external speakers.
If you decide not to use the external speakers,
be sure the switch is on int. or the internal
speakers will not work.
A
press”CLK-ADJ”
press”FF/FB” to
target me and then
“CLK-ADJ”
In the stop or play mode, Press “RANDOM” to
activate or deactivate the random function.
Notes:
1) It can work with “INTRO”, “REPEAT” and
“REMAIN”.
2) The random function will not clear except press
“STOP” twice or press “PROG” in STOP mode.
enter to source
selection
play without
Random
press”FF/FB”
to select
source
(CD/TUNER/
PHONO)
end of Timer-on
for synoadj
Rec only
press “CLK-ADJ”
press “RANDOM”
play with Random
9
press “RANDOM”
14
CD Player & Connecting Optional Equipment
Clock Operation
Program
Timer-Off Operation
Track programming
Programmed track revision
Example: “set Timer - off for 8:15am”
A
While CD is stopped, press “PROG” to enter
PROGRAM mode.
A
While CD is stopped, press “PROG” button to
check the sequence of programmed tracks.
A
Press “MODE” to timer-off display mode.
B
B
Press “FF” or “FB” to select a desired track
number.
B
After checking, just press “PLAY” to start play.
Press “CLK-ADJ” to enter to timer-off houradjustment mode.
C
C
Press “PROG” to save that track.
Press “FF / FB” to set desired hour. (e.g.
12:00am 8:00am ).
D
Repeat above procedures to program additional
tracks.
E
After end of program, press “PLAY” to start
playback.
Notes: 1) Clear programming process by using of
“STOP”.
A
Press “TIMER” to deactivate (both icons flash)
or activate (only “Timer” flash ) Timer-off function.
Timer -off function on actived
deactivate
Timer-off function
31-track programed
Notes: .
1) To program, the CD must be stopped.
press “PLAY”
start to play
D
Press “CLK-ADJ” to enter to timer-off minuteadjustment mode.
E
Press “FF / FB” to set desired minute. (e.g.
8:00am
8:15am ).
F
Press “CLK-ADJ” to return to timer-off display
mode with activation of Timer-off function.
press “TIMER”
Snooze Operation
press “MODE” to TIMER-OFF
SETTING mode
2) The same track can be programmed more than
once.
If using the Timer-On function, you can also use the
Snooze function. Using the Snooze function will
allow you to temporarily turn off the Timer-On function
for 5 minutes.
CD stopped
playing
enter to
HOUR-ADJ mode
press “CLK-ADJ”
Press “SNOOZE” to turn off the system. After 5
minutes, the system will ON again automatically
Notes:
1) The function mode (CD/TUNER/AUX/TAPE) will
not be changed for above operation.
press “PROG”
enter to prog mode
enter to
MINUTE-ADJ
mode
press “FF”/”FB” to
target time and
then “CLK-ADJ”
Add or Change program track
select desired
track number
A
CD playing due
to Timer-on
Power- on
press “FF”or “FB”
A
While CD is stopped, press “PROG” repeatedly
to reach the program number that you want to
change.
B
Press “FF” or “FB” to desire track.
C
Press “PROG” to save.
D
Repeat above procedures to add or change
program track.
end of Timer-off
adj.
press “FF”/”FB” to
target time and
then “CLK-ADJ”
press “SNOOZE”
save & 2nd
prog initial
press “PROG”
Notes:
1) It can work with “INTRO”, “REPEAT” during
play.
Power-offed
After 5-min system
on and then start
to play
2) The programmed contents will not clear except
press “STOP” twice or press “RANDOM”.
13
10
CD Player
CD Player
Play
To Load A CD
A
Press “CD” on control panel or on remote control
to enter “CD” mode.
B
Press the “OPEN/CLOSE” button to open the
CD drawer.
A
Press “PLAY” to start play
CD stoped
C
Load the CD with CD label facing up.
D
Press the “OPEN/CLOSE” button to close the
CD drawer.
E
To remove CD, press the CD “STOP” button to
stop CD from spinning. Press the
“OPEN/CLOSE“ button to open drawer. Remove
CD and press the “OPEN/CLOSE” button to
close the CD drawer.
FF/FB and FS/BS
Pause
A
During playback, press “PLAY” to pause.
B
To resume play, press this key again.
Notes: 1)
Track Skip
A select a particular track by using “FF” or “FB”
(release key within 2 sec).
Pause function will be kept after “FF/FS”
or “FB/BS”.
Track Scan
A Hold “FS” or “BS” more than 2 sec to perform
scan.
playing
CD stopped
press “PLAY”
start to play
press “PAUSE”
pausing
Not just play
playing
playing
press “FF”/”FB”
to select a
desired track
CD Opening or Opened
Stop
Door Closing or
Reading TOC
press “CLOSE”
CD stopped
Remain time display
A
During playback, press “REMAIN” until Remain
icon appear.
B
To cancel remain time display, press “REMAIN”
until relative time show out.
This function will show you how much time is
remaining on the CD.
Note: 1) It can work with ‘INTRO’ or ‘REPEAT’.
CD Opening/
Opened
A
Start to play
During CD playback, press “STOP” to stop play
and then total time and total tracks will show on
the display.
press
“CD PLAY”
press “FF” / ”FB” to select a
desired track
Notes: “STOP” is a multi-function key.
1. Cancel programmed play, press “STOP” after
CD stopped
playing
2. Cancel repeat, intro, remain, random and / or
programming mode.
3. Cancel selected track number (not yet play).
4. Stop tape during CD-Sync-Rec.
press “OPEN”
playing
playing
During programming
CD Remain time
display
press “REMAIN”
twice
After programming
press “STOP”
After clear
press “STOP”
press “STOP”
CD stopped
RANDOM
mode
11
press “STOP”
Track no.
selected
and not
Just play
12
Download PDF

advertising