Cub Cadet 190-190-100 Lawn Mower User Manual

Operator’s Manual
Triple Bagger Kit
Model 190-190-100
Model 190-192-190
IMPORTANT: Read safety rules and instructions carefully
Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered,
brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state
laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator. In the State of California the
above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply
on federal lands. A spark arrester for the muffler is available through your Cub Cadet dealer or contact the service department, P.O. Box
361131 Cleveland, Ohio 44136-0019.
Cub Cadet LLC., P.O. Box 361131, Cleveland, OH 44136-0019
PRINTED IN U.S.A.
FORM NO. 769-01136.fm
(4/2004)
TABLE OF CONTENTS
Content
Customer Support
Important Safe Operation Practices
Assembly & Operation
Illustrated Parts List
Warranty
Page
2
3
7
10
Back Cover
FINDING MODEL NUMBER
This Operator’s Manual is an important part of your new Triple Bagger Accessory. It will help you assemble,
prepare and maintain the unit for best performance. Please read and understand what it says.
Before you start assembling your new equipment, please locate the model plate on the
equipment and copy the information from it in the space provided below. A sample model plate
and location is also given below. From the operator’s position, locate the model plate in the front,
left portion of the plastic grass catcher cover. This information will be necessary to use the
manufacturer’s web site and/or seek help from Dealer Referral Line or a Cub Cadet dealer.
CUB CADET LLC
P. O. BOX 361131
CLEVELAND, OH 44136
DEALER LOCATOR PHONE NUMBER: 877-282-8684
www.cubcadet.com
Copy the model number here:
Copy the serial number here:
CUSTOMER SUPPORT
Please do NOT return the unit to the retailer from where it was purchased, without first contacting Customer Support.
If you have difficulty assembling this product or have any questions regarding operation or maintenance of
this accessory, you can seek help from the experts. Choose from the options below:
Visit cubcadet.com for many useful suggestions. Click on Customer Support button and you
will get the four options reproduced here. Click on the appropriate button and help is
immediately available.
The answer you are
looking for could be just
a mouse click away!
The answer you are
looking for could be just
a mouse click away!
If you prefer to reach a Customer Support Representative, please call 1- (877) 282-8684.
2
SECTION 1: IMPORTANT SAFE OPERATION PRACTICES
WARNING: This symbol points out important safety instructions which, if not followed, could endanger
the personal safety and/or property of yourself and others. Read and follow all instructions in this manual
before attempting to operate this machine. Failure to comply with these instructions may result in personal
injury. When you see this symbol—heed its warning.
WARNING: The Battery and Engine Exhaust contains chemicals known to the State of California
to cause cancer, birth defects or other reproductive harm. The battery and posts contain lead;
wash hands after handling.
WARNING: This machine was built to be operated according to the rules for safe operation in this
manual. As with any type of power equipment, carelessness or error on the part of the operator can result in
serious injury. This machine is capable of amputating hands and feet and throwing objects. Failure to
observe the following safety instructions could result in serious injury or death.
General Operation
11. A missing or damaged discharge cover can cause blade
contact or thrown object injuries.
12. Stop the blade(s) when crossing gravel drives, walks, or
roads and while not cutting grass.
13. Watch for traffic when operating near or crossing
roadways. This machine is not intended for use on any
public roadway.
14. Do not operate the machine while under the influence of
alcohol or drugs.
15. Mow only in daylight or good artificial light.
16. Never carry passengers.
17. Disengage blade(s) before shifting into reverse. Back up
slowly. Always look down and behind before and while
backing to avoid a back-over accident.
18. Slow down before turning. Operate the machine
smoothly. Avoid erratic operation and excessive speed.
19. Disengage blade(s), set parking brake, stop engine and
wait until the blade(s) come to a complete stop before
removing grass catcher, emptying grass, unclogging
chute, removing any grass or debris, or making any
adjustments.
20. Never leave a running machine unattended. Always turn
off blade(s), place transmission in neutral, set parking
brake, stop engine and remove key before dismounting.
21. Use extra care when loading or unloading the machine
into a trailer or truck. This unit should not be driven up or
down ramp(s), because the unit could tip over, causing
serious personal injury. The unit must be pushed
manually on ramp(s) to load or unload properly.
22. Muffler and engine become hot and can cause a burn. Do
not touch.
23. Check overhead clearances carefully before driving
under low tree branches, wires, door openings etc.,
where the operator may be struck or pulled from the unit,
which could result in serious injury.
24. Disengage all attachment clutches, depress the brake
pedal completely and shift into neutral before attempting
to start engine.
25. Your machine is designed to cut normal residential grass
of a height no more than 10”. Do not attempt to mow
through unusually tall, dry grass (e.g., pasture) or piles of
dry leaves. Dry grass or leaves may contact the engine
exhaust and/or build up on the mower deck presenting a
potential fire hazard.
1.
Read, understand, and follow all instructions on the
machine and in the manual(s) before attempting to
assemble and operate. Keep this manual in a safe place
for future and regular reference and for ordering
replacement parts.
2. Be familiar with all controls and their proper operation.
Know how to stop the machine and disengage them
quickly.
3. Never allow children under 14 years old to operate this
machine. Children 14 years old and over should read and
understand the operation instructions and safety rules in
this manual and should be trained and supervised by a
parent. Never allow adults to operate this machine
without proper instruction.
4. To help avoid blade contact or a thrown object injury,
keep bystanders, helpers, children and pets at least 75
feet from the machine while it is in operation. Stop
machine if anyone enters the area.
5. Thoroughly inspect the area where the equipment is to be
used. Remove all stones, sticks, wire, bones, toys, and
other foreign objects which could be picked up and
thrown by the blade(s). Thrown objects can cause
serious personal injury.
6. Plan your mowing pattern to avoid discharge of material
toward roads, sidewalks, bystanders and the like. Also,
avoid discharging material against a wall or obstruction
which may cause discharged material to ricochet back
toward the operator.
7. Always wear safety glasses or safety goggles during
operation and while performing an adjustment or repair to
protect your eyes. Thrown objects which ricochet can
cause serious injury to the eyes.
8. Wear sturdy, rough-soled work shoes and close-fitting
slacks and shirts. Loose fitting clothes and jewelry can be
caught in movable parts. Never operate this machine in
bare feet or sandals.
9. Be aware of the mower and attachment discharge
direction and do not point it at anyone. Do not operate the
mower without the discharge cover or entire grass
catcher in its proper place.
10. Do not put hands or feet near rotating parts or under the
cutting deck. Contact with the blade(s) can amputate
hands and feet.
3
26. Use only accessories and attachments approved for this
machine by the machine manufacturer. Read,
understand and follow all instructions provided with the
accessory or attachment.
27. Data indicates that operators, age 60 years and above,
are involved in a large percentage of tractor-related
injuries. These operators should evaluate their ability to
operate the tractor safely enough to protect themselves
and others from serious injury.
28. If situations occur which are not covered in this manual,
use care and good judgment. Contact your Yard-Man
dealer for assistance.
dump cart, lawn roller, etc.) on slopes greater than 5
degrees. When going down hill, the extra weight tends to
push the tractor and may cause you to loose control. (e.g.
tractor may speed up, braking and steering ability are
reduced, attachment may jack-knife and cause tractor to
overturn).
Children
1.
Slope Operation
Slopes are a major factor related to loss of control and tipover accidents which can result in severe injury or death. All
slopes require extra caution. If you cannot back up the slope
or if you feel uneasy, do not mow it.
For your safety, use the slope gauge included as part of this
manual to measure slopes before operating this unit on a
sloped or hilly area. If the slope is greater than 15 degrees as
shown on the slope gauge, do not operate this unit on that
area.
Do:
1.
2.
3.
4.
5.
6.
Mow up and down slopes, not across. Exercise extreme
caution when changing direction on slopes.
Watch for holes, ruts, bumps, rocks, or other hidden
objects. Uneven terrain could overturn the machine. Tall
grass can hide obstacles.
Use slow speed. Choose a low enough speed setting so
that you will not have to stop or shift while on the slope.
Tires may lose traction on slopes even though the brakes
are functioning properly. Always keep machine in gear
when going down slopes to take advantage of engine
braking action.
Follow the manufacturer’s recommendations for wheel
weights or counterweights to improve stability of the
machine. Use extra care with grass catchers or other
attachments. These can change stability of the machine.
Keep all movement on the slopes slow and gradual. Do
not make sudden changes in speed or direction. Rapid
engagement or braking could cause the front of the
machine to lift and rapidly flip over backwards which
could cause serious injury.
Avoid starting or stopping on a slope. If tires lose traction,
disengage the blade(s) and proceed slowly straight down
the slope.
9.
Towing
1.
2.
3.
4.
Do Not:
1.
2.
3.
4.
5.
6.
7.
Tragic accidents can occur if the operator is not alert to
the presence of children. Children are often attracted to
the machine and the mowing activity. They do not
understand the dangers. Never assume that children will
remain where you last saw them.
a. Keep children out of the mowing area and in
watchful care of a responsible adult other than the
operator.
b. Be alert and turn machine off if a child enters the
area.
c. Before and while backing, look behind and down
for small children.
d. Never carry children, even with the blade(s) shut
off. They may fall off and be seriously injured or
interfere with safe machine operation.
e. Use extreme care when approaching blind
corners, doorways, shrubs, trees or other objects
that may block your vision of a child who may run
into the machine.
f. Disengage the cutting blade(s) before shifting in
reverse. The “No-Cut-In Reverse” feature
emphasises not to cut in reverse and to avoid
back-over accidents; do not defeat it.
g. Keep children away from hot or running engines.
They can suffer burns from a hot muffler.
h. Remove key when machine is unattended to
prevent unauthorized operation.
Never allow children under 14 years old to operate the
machine. Children 14 years old and over should read and
understand the operation instructions and safety rules in
this manual and should be trained and supervised by a
parent.
Do not turn on slopes unless necessary; then, turn slowly
and gradually downhill, if possible.
Do not mow near drop-offs, ditches or embankments.
The mower could suddenly turn over if a wheel is over the
edge of a cliff, ditch, or if an edge caves in.
Do not try to stabilize the machine by putting your foot on
the ground.
Do not use a grass catcher on steep slopes.
Do not mow on wet grass. Reduced traction could cause
sliding.
Do not shift to neutral and coast downhill. Over-speeding
may cause the operator to lose control of the machine
resulting in serious injury or death.
Do not tow heavy pull behind attachments (e.g. loaded
5.
6.
Tow only with a machine that has a hitch designed for
towing. Do not attach towed equipment except at the
hitch point.
Follow the manufacturers recommendation for weight
limits for towed equipment and towing on slopes.
Never allow children or others in or on towed equipment.
On slopes, the weight of the towed equipment may cause
loss of traction and loss of control.
Travel slowly and allow extra distance to stop.
Do not shift to neutral and coast downhill.
Service
Safe Handling Of Gasoline
1.
4
To avoid personal injury or property damage use extreme
care in handling gasoline. Gasoline is extremely
flammable and the vapors are explosive. Serious
personal injury can occur when gasoline is spilled on
yourself or your clothes which can ignite. Wash your skin
and change clothes immediately.
a. Use only an approved gasoline container.
b. Never fill containers inside a vehicle or on a truck
or trailer bed with a plastic liner. Always place
containers on the ground away from your vehicle
before filling.
c. When practical, remove gas-powered equipment
from the truck or trailer and refuel it on the ground.
If this is not possible, then refuel such equipment
on a trailer with a portable container, rather than
from a gasoline dispenser nozzle.
d. Keep the nozzle in contact with the rim of the fuel
tank or container opening at all times until fueling
is complete. Do not use a nozzle lock-open
device.
e. Extinguish all cigarettes, cigars, pipes and other
sources of ignition.
f. Never fuel machine indoors.
g. Never remove gas cap or add fuel while the
engine is hot or running. Allow engine to cool at
least two minutes before refueling.
h. Never over fill fuel tank. Fill tank to no more than
½ inch below bottom of filler neck to allow space
for fuel expansion.
i. Replace gasoline cap and tighten securely.
j. If gasoline is spilled, wipe it off the engine and
equipment. Move unit to another area. Wait 5
minutes before starting the engine.
k. To reduce fire hazards, keep machine free of
grass, leaves, or other debris build-up. Clean up
oil or fuel spillage and remove any fuel soaked
debris.
l. Never store the machine or fuel container inside
where there is an open flame, spark or pilot light
as on a water heater, space heater, furnace,
clothes dryer or other gas appliances.
m. Allow a machine to cool at least 5 minutes before
storing.
4.
5.
6.
7.
8.
9.
10.
11.
General Service
1.
2.
3.
12.
Never run an engine indoors or in a poorly ventilated
area. Engine exhaust contains carbon monoxide, an
odorless, and deadly gas.
Before cleaning, repairing, or inspecting, make certain
the blade(s) and all moving parts have stopped.
Disconnect the spark plug wire and ground against the
engine to prevent unintended starting.
Periodically check to make sure the blades come to
13.
14.
complete stop within approximately (5) five seconds after
operating the blade disengagement control. If the blades
do not stop within the this time frame, your unit should be
serviced professionally by an authorized dealer.
Check brake operation frequently as it is subjected to
wear during normal operation. Adjust and service as
required.
Check the blade(s) and engine mounting bolts at
frequent intervals for proper tightness. Also, visually
inspect blade(s) for damage (e.g., excessive wear, bent,
cracked).
Replace the blade(s) with the original equipment
manufacturer’s (O.E.M.) blade(s) only, listed in this
manual. “Use of parts which do not meet the original
equipment specifications may lead to improper
performance and compromise safety!”
Mower blades are sharp. Wrap the blade or wear gloves,
and use extra caution when servicing them.
Keep all nuts, bolts, and screws tight to be sure the
equipment is in safe working condition.
Never tamper with the safety interlock system or other
safety devices. Check their proper operation regularly.
After striking a foreign object, stop the engine, disconnect
the spark plug wire(s) and ground against the engine.
Thoroughly inspect the machine for any damage. Repair
the damage before starting and operating.
Never attempt to make adjustments or repairs to the
machine while the engine is running.
Grass catcher components and the discharge cover are
subject to wear and damage which could expose moving
parts or allow objects to be thrown. For safety protection,
frequently check components and replace immediately
with original equipment manufacturer’s (O.E.M.) parts
only, listed in this manual. “Use of parts which do not
meet the original equipment specifications may lead to
improper performance and compromise safety!”
Do not change the engine governor settings or overspeed the engine. The governor controls the maximum
safe operating speed of the engine.
Maintain or replace safety and instruction labels, as
necessary.
Observe proper disposal laws and regulations for gas,
oil, etc. to protect the environment.
Your Responsibility
Restrict the use of this accessory and the tractor to persons who read, understand and follow the warnings and
instructions in this manual and on the machine.
NOTE: Model 190 Triple Bagger Kit is designed for use on Cub Cadet Fast Attach™ compatible tractors equipped
with 50-inch cutting deck only.This will NOT mount, nor operate safely or properly on any other tractor regardless of
the tractor’s compatibility with similar accessories.
5
SECTION 2: LOOSE PARTS
The grass catcher kit is shipped with following loose parts in the carton. Please remove all loose parts, including the
hardware pack, from the carton before discarding it. Compare with Figure 1 to check that all parts were included.
Note that the kit and the hardware pack contain extra items which are not used on your unit.
Grasscatcher Cover
Assembly
Support Tube
(attached to cover)
Discharge
Chute
Assembly
Grass Bag
Mounting
Bracket
Blades
Chute Stop
Bracket
Carriage Bolt
Lock Nut
Figure 1
6
SECTION 3: ASSEMBLY & OPERATION
NOTE: References to left, right , front and rear of the
tractor are from the operator’s position, unless
otherwise stated.
• Before assembly, place the tractor on a firm, level
surface, disengage the PTO, stop the tractor
engine and set the parking brake.
• For convenience, pivot the seat forward and leave it
in that position until the grass collector is fully
mounted and assembled.
Support
Tube
Mounting Bracket Assembly
•
•
Remove the hairpin clip and clevis pin from the rear
of the mounting bracket assembly.
Position the hooked ends of the bracket assembly
to the outside of the hitch plate and over the
shoulder bolts. See Figure 2.
Mounting
Bracket
Hitch Plate
NOTE: Grasscatcher cover not shown here for clarity
Mounting
Bracket
Figure 3
•
Attach the grass bags using the slots shown in
Figure 4. Close the grasscatcher cover.
se
he
n t es
g
i
Al hol
Slots
Shoulder Bolt
Figure 2
•
Grass
Bag
Cover
Reinsert the clevis pin through the aligned holes
(Figure 2) in both the bracket assembly and the
hitch plate and secure with the hairpin clip.
IMPORTANT: There are two holes in the clevis pin. Be
sure to insert the hairpin clip in the upper hole to
properly secure the bracket assembly to the hitch plate.
Grass Bag
Attaching Grasscatcher Cover and Bags
•
Figure 4
Place the grasscatcher cover assembly’s support
tube in position on the rear of unit by sliding the
support tube down through the center hole in the
mounting bracket assembly. See Figure 3.
Attaching Blades
WARNING: Always protect your hands while
servicing blades by wearing heavy work gloves
or using heavy rags.
NOTE: Two bagging blades are included in the
grasscatcher kit. These will replace the two outer
blades from the deck of the tractor while the center
blade will remain unchanged. Do not try to replace the
center blade with either bagging blade from the kit.
7
•
•
•
NOTE: An extra set of carriage bolt and lock nut have
been supplied in your accessory kit. You may replace
the old hardware for the chute stop bracket with these
new ones, or save for later use.
Remove the cutting deck from beneath the tractor
(refer to instructions for Deck Removal in your tractor’s
operator’s manual), then gently flip the deck over to
expose its underside.
Place a block of wood between the center deck
housing baffle and the cutting blade to act as a
stabilizer. See Figure 5.
Use a 15/16" wrench to remove the hex flange nut
that secures the blade to the outer blade spindle
assembly. See Figure 5.
Lock Nut
Remove this
chute stop
Carriage Bolt
A
Hex Flange Nut
B
Wood Block
Install this
chute stop
Deck
Chute Deflector
Figure 6
NOTE: This chute stop bracket may stay on the unit
even when the bagger is not being used.
Spindle Assembly
Attaching Discharge Chute
•
•
Figure 5
WARNING: The hex flange nut has a righthanded thread pattern. Do not attempt to force
the nut in an incorrect direction; it may damage
the nut and create a safety hazard.
•
•
•
•
•
Place a new blade on top of the outer blade spindle
so that side of the blade with part number faces the
ground when the mower is in the operating position.
Secure with the hex flange nut removed earlier.
Use a torque wrench to tighten the hex flange nut
between 70 to 90 foot-pounds.
Replace blade from the other outer blade spindle
with the second blade from the bagger kit.
Raise the deck to its highest position.
Raise the chute deflector on the deck and hold it
while you position the discharge chute over the
chute opening.
Insert the hinge pin of the discharge chute into the
tube on the chute stop bracket. See Figure 7.
Rotate the chute around the deck so that its front
edge fits snugly into the deck opening. Lower the
chute deflector slowly.
Chute Deflector
NOTE: The center blade spindle will continue to use the
standard cutting blade already attached to the deck.
•
Remount the cutting deck following instructions in
the owner’s manual of the tractor.
Discharge
Chute
Insert hinge
pin here
Attaching Chute Stop Bracket
•
•
Hinge Pin
Remove the carriage bolt and lock nut holding the
chute stop to the deck. See Inset A of Figure 6.
Save the hardware.
Replace with new chute stop bracket, from the
bagger kit, at the same position on the deck. See
Inset B of Figure 6. Secure with the hardware
removed earlier.
Figure 7
•
•
8
Attach the longer of the three retainer straps on the
discharge chute to the retainer clip on the deck.
Refer to Figure 9.
Insert the curved end of chute tube into the hole in
the grass bag cover as shown in Figure 8.
•
Insert chute tube here
•
Insert the lower end of the chute tube over the
discharge chute so that its two notches fit into the
two corresponding notches on the discharge chute.
See Figure 9.
Secure by placing the ends of the two short retainer
straps on the discharge chute over the pins on the
chute tube. See Figure 9.
Operation
Your triple bagger kit is a valuable accessory to your
tractor. Optimize its performance by operating
correctly. Do not try to fit it to tractors other than those
specified on page 5.
Figure 8
•
Place short
strap here
Place long
strap here
•
•
•
Discharge
Chute
Figure 9
9
Open the grass bag cover by lifting the cover up.
Do not remove the chute tube assembly from the
tractor.
Remove the grass bags by lifting up and moving
the bags away from the support tube assembly.
To empty the grass clippings at a proper disposal
sight, use the handle at the bottom of each grass
bag. Holding the bag firmly, empty the contents.
Under normal usage, the grass bags are subject
to wear and tear. Check these bags periodically
and wash with water if dirty. Allow to air-dry; do
not apply heat.
SECTION 4: PARTS LIST FOR MODELS 190-190-100 & 190-192-190
14
23
21
26
4
12
22
20
7
31
28
16
33
3
16 16
8
17 11
30
18
19
16 25
B
8
B
C
8
24
See parts
break-down
below
16
2
16
29 13
C
9
6
27
9
15
5
10
Components of Cover Assembly pn # 664-04018:
35
Components of Bag Assembly:
50
45
47
49
A
51
43
40
48
45
44
37
46
34
A
36
42
38
39
10
40
Model 190-190-100 & 190-192-190
Ref.
No.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
Part No.
17200A
17247
631-0221
664-04018
683-0617
689-00002
710-0597
710-0751
710-3008
710-3168
711-0309A
711-04069
712-0130
712-0431
712-3004A
712-3027
714-0117
723-04008A
726-3040
723-0476
731-0926B
731-2299A
736-0253
736-0270
736-3092
738-0380
Description
Ref.
No.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
40.
41.
42.
43.
44.
45.
46.
47.
48.
49.
50.
51.
Catcher Support Bracket
Tubing Adapter
Chute Elbow
Cover Assembly (includes ref. 35 to 46)
Bracket Assembly: Chute Stop
Grasscatcher Support Assembly
Hex Bolt 1/4-20 x 1.0
Hex Bolt 1/4-20 x 0.620
Hex Bolt 5/16-18 x 0.75
Carriage Bolt
Clevis Pin
Grasscatcher Pin
Hex Lock Nut 3/8-16
Flange Lock Nut 3/8-16
Flange Lock Nut 5/16-18
Flange Lock Nut 1/4-20
Hairpin Clip
Chute Strap
Push Nut
Chute Strap
Catcher Tube
Extension Tube
Beleville Washer
Bell Washer
Flat Washer
Shoulder Screw
11
Part No.
742-04067
777D03361
783-0601
783-0673
783-0764
783-0765
783-1501
764-0251
17202A
710-1652
720-04018
726-04027
726-0479
728-0123
731-04166
731-04189
731-0824A
735-04020
736-0400
749-0747
17201A
710-0473
710-0604A
712-0272
749-0745A
Description
Blade : High Lift; Cub Cadet
Logo: Cub Cadet
Catcher Support Bracket
Catcher Support Bracket RH
Catcher Support Bracket LH
Bracket: Cross Support
Spacer
Grassbag
Screen Mounting Bracket
TT Screw 1/4-20 x 0.625
Screen
Push Nut
Ratchet Clip
Pop Rivet
Grass Bag Cover
Retainer Seal
Plastic Plate
Grass Bag Seal
Flat Washer
Hinge Bracket
Bag Hanger Bracket
Machine Screw
TT Screw 5/16-18 x 0.625
Hex Sems Nut
Tube: Grass Bag Frame
MANUFACTURER’S LIMITED WARRANTY FOR:
The limited warranty set forth below is given by Cub Cadet
LLC with respect to new merchandise purchased and used in
the United States, its possessions and territories.
“Cub Cadet” warrants this product against defects in material
and workmanship for a period of two (2) years commencing
on the date of original purchase and will, at its option, repair or
replace, free of charge, any part found to be defective in
materials or workmanship. This limited warranty shall only
apply if this product has been operated and maintained in
accordance with the Operator’s Manual furnished with the
product, and has not been subject to misuse, abuse,
commercial use, neglect, accident, improper maintenance,
alteration, vandalism, theft, fire, water, or damage because of
other peril or natural disaster. Damage resulting from the
installation or use of any part, accessory or attachment not
approved by Cub Cadet for use with the product(s) covered
by this manual will void your warranty as to any resulting
damage.
Normal wear parts are warranted to be free from defects in
material and workmanship for a period of thirty (30) days from
the date of purchase. Normal wear parts include, but are not
limited to items such as: batteries, belts, blades, blade
adapters, grass bags, rider deck wheels, seats, snow thrower
skid shoes, shave plates, auger spiral rubber and tires.
HOW TO OBTAIN SERVICE: Warranty service is available,
WITH PROOF OF PURCHASE, through your local authorized
service dealer. To locate the dealer in your area, check your
Yellow Pages, or contact Cub Cadet LLC at P.O. Box 361131,
Cleveland, Ohio 44136-0019, or call 1-877-282-8684, or log
on to our Web site at www.cubcadet.com.
This limited warranty does not provide coverage in the
following cases:
a.
b.
c.
d.
The engine or component parts thereof. These items
may carry a separate manufacturer’s warranty. Refer
to applicable manufacturer’s warranty for terms and
conditions.
Log splitter pumps, valves, and cylinders have a sepa
rate one year warranty.
Routine maintenance items such as lubricants, filters,
blade sharpening, tune-ups, brake adjustments, clutch
adjustments, deck adjustments, and normal
deterioration of the exterior finish due to use or
exposure.
Cub Cadet does not extend any warranty for products
sold or exported outside of the United States, its
e.
f.
g.
possesions and territories, except those sold through
Cub Cadet’s authorized channels of export
distribution.
Replacement parts that are not genuine Cub Cadet
parts.
Service completed by someone other than an
authorized service dealer.
Transportation charges and service calls.
No implied warranty, including any implied warranty of
merchantability of fitness for a particular purpose,
applies after the applicable period of express written
warranty above as to the parts as identified. No other
express warranty, whether written or oral, except as
mentioned above, given by any person or entity,
including a dealer or retailer, with respect to any product,
shall bind Cub Cadet. During the period of the warranty,
the exclusive remedy is repair or replacement of the
product as set forth above.
The provisions as set forth in this warranty provide the
sole and exclusive remedy arising from the sale. Cub
Cadet shall not be liable for incidental or consequential
loss or damage including, without limitation, expenses
incurred for substitute or replacement lawn care services
or for rental expenses to temporarily replace a warranted
product.
Some states do not allow the exclusion or limitation of
incidental or consequential damages, or limitations on how
long an implied warranty lasts, so the above exclusions or
limitations may not apply to you.
In no event shall recovery of any kind be greater than the
amount of the purchase price of the product sold. Alteration
of safety features of the product shall void this warranty.
You assume the risk and liability for loss, damage, or injury to
you and your property and/or to others and their property
arising out of the misuse or inability to use the product.
This limited warranty shall not extend to anyone other than the
original purchaser or to the person for whom it was purchased
as a gift.
HOW STATE LAW RELATES TO THIS WARRANTY: This
limited warranty gives you specific legal rights, and you may
also have other rights which vary from state to state.
IMPORTANT: Owner must present Original Proof of
Purchase to obtain warranty coverage.
Cub Cadet LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019; Phone: 1-877-282-8684