Cuisinart 16010710 Digital Camera User Manual

YF00628-122
EN
DIGITAL CAMERA
FINEPIX Z70 series
Owner’s Manual
Thank you for your purchase of this product. This manual
describes how to use your FUJIFILM FinePix Z70 series digital
camera and the supplied software. Be sure that you have
read and understood its contents before using the camera.
Before You Begin
First Steps
Basic Photography and Playback
More on Photography
More on Playback
Movies
Connections
Menus
Technical Notes
For information on related products, visit our website at
http://www.fujifilm.com/products/digital_cameras/index html
Troubleshooting
Appendix
About This Manual
Before using the camera, read this Owner’s Manual and the other supplied documents. For
information on specific topics, consult the sources below.
✔ Camera Q & A ................................................... pg. iii
Know what you want to do but don’t know the
name for it? Find the answer in “Camera Q & A.”
✔ Table of Contents ............................................
............................................pg.
pg. viii
The “Table of Contents” gives an overview of the
entire manual. The principal camera operations
are listed here.
✔ Troubleshooting ...
..............................................pg.
... ... ... ... ... ... ... ... ... ... ..pg. 93
Having a specific problem with the camera?
Find the answer here.
✔ Warning Messages and Displays .....................
.....................pg.
pg. 100
Find out what’s behind that flashing icon or
error message in the monitor.
✔ Glossary ........................................................pg.
... ... ... ... ... ... ... ... ... ... ... ... ... ... pg. 104
The meanings of some technical terms may be
found here.
Memory Cards
Pictures can be stored in the camera’s internal memory or on optional SD and SDHC memory cards. In this
manual, SD memory cards are referred to as “memory cards.” For more information, see page 8.
ii
Camera Q & A
Find items by task.
Camera Setup
Question
How do I set the camera clock?
Can I set the clock to local time when I travel?
How do I keep the monitor from turning off automatically?
How do I make the monitor brighter or darker?
How do I stop the camera beeping and clicking?
What are the parts of the camera called?
What do the icons in the monitor mean?
How do I use the menus?
What’s behind that flashing icon or error message in the monitor?
How much charge is left in the battery?
Key phrase
Date and time
Time difference
Auto power off
LCD brightness
Silent mode
Operation volume,
shutter volume
Parts of the camera
Monitor
Menus
Messages and displays
Battery level
See page
14
86
89
89
36
84
2
3
61
100
16
Sharing Pictures
Question
Can I print pictures on my home printer?
Can I copy my pictures to my computer?
Key phrase
See page
Printing pictures
50
Viewing pictures on a computer
55
iii
Camera Q & A
Taking Pictures
Question
How many pictures can I take?
Is there a quick and easy way to take snapshots?
How can I make good portraits?
Can the camera automatically select the most suitable mode?
Is there a simple way to adjust settings for different scenes?
How do I shoot close-ups?
How do I keep the flash from firing?
How do I stop my subjects’ eyes glowing red when I use the flash?
How do I “fill-in” shadows on back-lit subjects?
How do I take a group portrait that includes the photographer?
How do I frame pictures with the subject off to one side?
How do I shoot movies?
Can I join short clips into a longer movie?
iv
Key phrase
Memory capacity
k mode
Intelligent Face Detection
G mode
Shooting mode
Macro mode (Close-ups)
See page
105
23
27
16
22
34
Flash mode
35
Self-timer mode
Focus lock
Recording movies
Successive movie
37
30
45
46
Camera Q & A
Viewing Pictures
Question
How do I view my pictures?
Is there a simple way to delete one image?
How do I delete one or all images at once?
Can I zoom in on pictures during playback?
How do I view a lot of pictures at once?
Can I protect my pictures from accidental deletion?
Can I hide the icons in the monitor when viewing my pictures?
Can I view my pictures in a slide show?
Can I add a short voice memo to my pictures?
Can I crop unwanted elements out of my pictures?
Can I make small copies of pictures?
How do I search for pictures?
How do I upload pictures or videos to my blog?
Can I copy pictures from internal memory to a memory card?
How can I process images for posting to my blog?
Can I add effects to my movies?
How do I view my pictures on TV?
Key phrase
Single-frame playback
Deleting pictures
Erase
Playback zoom
Multi-frame playback
Protect
Choosing a display format
Slide show
Voice memo
Crop
Resize
Image search
Mark for upload to
Copy
Edit for blog
Adding effects to pictures
Viewing pictures on TV
See page
40
21
43
41
42
75
40
74
80
76
77
68
72
79
69
72
49
v
Memo
vi
Memo
vii
Table of Contents
About This Manual .......................................................................... ii
Camera Q & A .................................................................................... iii
Camera Setup .............................................................................. iii
Sharing Pictures .......................................................................... iii
Taking Pictures ............................................................................ iv
Viewing Pictures .......................................................................... v
Before You Begin
Introduction....................................................................................... 1
Symbols and Conventions .......................................................... 1
Supplied Accessories .................................................................... 1
Parts of the Camera ....................................................................... 2
The Monitor ................................................................................... 3
First Steps
Charging the Battery ..................................................................... 4
Inserting the Battery...................................................................... 6
Inserting a Memory Card ............................................................. 8
Turning the Camera on and Off...............................................13
Shooting Mode .............................................................................13
Playback Mode ..............................................................................13
Basic Setup .......................................................................................14
Basic Photography and Playback
Taking Pictures in G (SCENE RECOGNITION) Mode .....16
Viewing Pictures ............................................................................21
viii
More on Photography
A Shooting Mode........................................................................22
Selecting a Shooting Mode......................................................22
Shooting Modes ...........................................................................23
B Intelligent Face Detection and Red-Eye Removal ...27
Focus Lock ........................................................................................30
5 Exposure Compensation.....................................................32
L Macro mode (Close-ups) ......................................................34
K Using the Flash (Intelligent Flash).....................................35
J Using the Self-Timer...............................................................37
Setting the Self-Timer ................................................................37
COUPLE TIMER...............................................................................37
GROUP TIMER ................................................................................38
10 SEC/ 2 SEC..................................................................................38
More on Playback
Single-Frame Playback ...............................................................40
Playback Zoom..............................................................................41
Multi-Frame Playback .................................................................42
M Deleting Pictures ....................................................................43
Movies
A Recording Movies ...................................................................45
R Successive Movie ................................................................46
D Viewing Movies .......................................................................48
Table of Contents
Connections
Viewing Pictures on TV ...............................................................49
Printing Pictures via USB ...........................................................50
Connecting the Camera ............................................................50
Printing Selected Pictures ........................................................50
Printing the DPOF Print Order ................................................51
Creating a DPOF Print Order ....................................................53
Viewing Pictures on a Computer............................................55
Installing the Software...............................................................55
Windows: Installing My FinePix Studio.............................55
Macintosh: Installing FinePixViewer ..................................57
Connecting the Camera ............................................................59
Menus
The Shooting Menu ......................................................................61
Using the Shooting Menu.........................................................61
Shooting Menu Options ............................................................62
n ISO ............................................................................................63
o IMAGE SIZE ...........................................................................63
T IMAGE QUALITY ..................................................................64
p FINEPIX COLOR ....................................................................64
C WHITE BALANCE .................................................................65
E CONTINUOUS (Continuous shooting)........................65
F AF MODE ...............................................................................66
The Playback Menu.......................................................................67
Using the Playback Menu .........................................................67
Playback Menu Options.............................................................67
V IMAGE SEARCH ....................................................................68
vEDIT FOR BLOG.....................................................................69
e MOVIE EDIT ............................................................................72
b MARK FOR UPLOAD TO .....................................................72
q SLIDE SHOW .........................................................................74
a RED EYE REMOVAL .............................................................74
O PROTECT ................................................................................75
R CROP .......................................................................................76
j RESIZE ....................................................................................77
N IMAGE ROTATE ....................................................................78
P COPY .......................................................................................79
Q VOICE MEMO........................................................................80
P TRANSITION .........................................................................82
c MOVIE TRIMMING ...............................................................82
The Setup Menu .............................................................................83
Using the Setup Menu ...............................................................83
Setup Menu Options...................................................................84
p TIME DIFFERENCE...............................................................86
m FORMAT .................................................................................87
a IMAGE DISP. ..........................................................................87
b FRAME NO. ............................................................................88
k ILLUMINATION.....................................................................88
j SOUND ...................................................................................89
f PLAYBACK VOLUME...........................................................89
g LCD BRIGHTNESS................................................................89
h LCD MODE ............................................................................89
o AUTO POWER OFF ..............................................................89
c DIGITAL ZOOM ....................................................................90
ix
Table of Contents
Technical Notes
Optional Accessories ...................................................................91
Accessories from Fujifilm ..........................................................92
Troubleshooting
Troubleshooting ............................................................................93
Warning Messages and Displays ......................................... 100
Appendix
Glossary .......................................................................................... 104
Internal Memory/Memory Card Capacity ....................... 105
Specifications ............................................................................... 106
Caring for the Camera ...............................................................110
Storage and Use.......................................................................110
Cleaning ......................................................................................110
Travelling ....................................................................................110
Notes and Cautions .................................................................... 111
x
Introduction
Symbols and Conventions
Menus and other text in the camera monitor are shown in bold. In the illustrations in this manual, the
monitor display may be simplified for explanatory purposes.
Before You Begin
The following symbols are used in this manual:
Caution: This information should be read before use to ensure correct operation.
Note: Points to note when using the camera.
Tip: Additional information that may be helpful when using the camera.
Supplied
p
Accessories
The following items are included with the camera:
CD-ROM
NP-45A rechargeable
battery
BC-45B battery
charger
Attaching the Strap
Attach the strap as shown.
USB cable
Documentation
Strap
1
Introduction
Parts of the Camera
For more information, refer to the page listed to the right of each item.
1
2
9
3
4
5
10
6
11
12
13
Selector button
Move cursor up
5 (exposure compensation) button (pg. 32)
I (delete) button (pg. 21)
14
20
7
15
19
8
23
18
21
17
1 A (movie recording) button...........45
2
Shutter button ...........................................19
Flash..................................................................35
Microphone .................................................80
Lens
Speaker ...........................................................81
Self-timer lamp ..........................................39
Lens cover .....................................................13
Monitor ............................................................. 3
16
Move cursor down
J (self-timer)
button (pg. 37)
22
2
3
4
5
6
7
8
9
Move cursor left
L (macro)
button (pg. 34)
10
11
12
13
14
Upload button ...........................................83
W (zoom out) button .....................17, 42
T (zoom in) button ...........................17, 41
D (playback) button ............................40
Connector for multi-connector
adapter............................................................49
15 Strap eyelet .................................................... 1
16 MENU/OK button .........................................14
17 Lock lever ........................................................ 6
Move cursor right
K (flash)
button (pg. 35)
18 Battery-chamber cover .......................... 6
19 DISP (display)/BACK button ..........20, 40
U (silent mode) button ......................36
20 Tripod mount
21 Battery chamber ......................................... 6
22 Memory card slot ....................................... 9
23 Battery latch .................................................. 6
Introduction
8
9 10 11
12 13
1
2
3
19
100
N
4
5
6
7
12 / 31 / 2050 10 : 00 AM
-1 2 3
14
15
16
17
18
19
20
21
1
2
3
4
5
6
7
8
Shooting mode .............................. 22
Flash mode.........................................35
Macro (close-up) mode............. 34
Self timer indicator ........................37
Focus warning .................................19
Blur warning ......................................35
Date and time...................................14
Intelligent Face Detection
indicator ..............................................27
9 Continuous mode .........................65
10 Silent mode ...................................... 36
11 Focus frame .......................................19
12 Internal memory indicator * ....... 8
13 Movie quality ....................................45
14 Number of available frames
................................................................105
15 Sensitivity ............................................63
16 Image quality................................... 64
17 Image size ...........................................63
18 FINEPIX COLOR ............................... 64
19 White balance ..................................65
20 Battery level .......................................16
21 Exposure compensation ...........32
Before You Begin
The Monitor
The following indicators may appear in the monitor during shooting and playback:
■ Shooting
* Indicates that no memory card is inserted and that pictures will be
stored in the camera’s internal memory (pg. 8).
■ Playback
8
1
2
3
4
5
6
7
9
10
11
12
100-0001
13
100
N
YouTube
12 / 31 / 2050 10 : 00 AM
-1 2 3
1/250 F4.0
14
15
1
2
3
4
5
6
7
8
Playback mode indicator ......... 40
Protected image .............................75
DPOF print indicator ....................51
Voice memo indicator................ 80
Upload setting ................................ 72
Aperture
Shutter speed
Intelligent Face Detection
indicator ...............................................41
9
10
11
12
13
14
15
Red-eye removal indicator ......74
Blog image ........................................ 69
Blog movie ........................................ 72
Portrait enhancer ...........................24
Frame number ................................ 88
Gift image .......................................... 40
Silent mode indicator................. 36
3
Charging the Battery
The battery is not charged at shipment. Charge the battery before use.
Batteries
The camera uses an NP-45A rechargeable battery.
charger as shown, making sure that the
battery is in the orientation indicated by the
E F labels.
B
Battery
F
label
B
E
Charging indicator
Arrow
Battery charger
E
B
First Steps
the battery in the charger.
1 Place
Insert the battery into the supplied battery
F label
the charger in.
2 Plug
Plug the charger into a power outlet. The
charging indicator will light.
C Cautions
• Unplug the charger when it is not in use.
• Remove dirt from the battery terminals with
a clean, dry cloth. Failure to observe this
precaution could prevent the battery from
charging.
• Charging times increase at low temperatures.
The Charging Indicator
The charging indicator shows battery charge status
as follows:
Charging indicator Battery status
Action
Battery not
Insert
Off
inserted.
the battery.
On (yellow) Battery charging.
—
Battery fully
Remove
On (green)
charged.
the battery.
Unplug the
charger and
Blinks (yellow)
Battery fault.
remove the
battery.
the battery.
3 Charge
Remove the battery when charging is
complete.
Charging time
See specifications of the battery charger (pg. 108).
4
Charging the Battery
First Steps
Cautions: Caring for the Battery
• Do not affix stickers or other objects to the battery. Failure to observe this precaution could make it
impossible to remove the battery from the camera.
• Do not short the battery terminals. The battery could overheat.
• Only use batteries designed for use with this product. Failure to observe this precaution could result in
product malfunction.
• Do not remove the labels from the battery or attempt to split or peel the outer casing.
• The battery gradually loses its charge when not in use. Charge the battery one or two days before use.
• Read the supplied documentation for additional cautions concerning battery use.
Caution: Battery Life
A noticeable decrease in the length of time the battery will hold a charge indicates that it has reached the end
of its service life and should be replaced.
Cautions: Using the Battery Charger
• Unplug the charger when it is not in use.
• Remove dirt from the battery terminals with a clean, dry cloth. Failure to observe this precaution could
prevent the battery from charging.
• Charging times increase at low temperatures.
5
Inserting the Battery
After charging the battery, insert it in the camera as described below.
the battery-chamber cover.
1 Open
Open the battery-chamber cover as shown,
sliding the lock lever in the direction of the
arrow.
Lock lever
the battery.
2 Insert
Face the gold terminals
downward and align
the orange stripe on the
battery with the orange
battery latch and slide
the battery into the
camera, keeping the
battery latch pressed to
the side. Confirm that
the battery is securely latched.
Orange stripe
Cautions
• Do not turn the camera on or off while the
battery-chamber cover is open. Failure to
observe this precaution could result in damage
to image files or memory cards.
• Do not use excessive force when handling the
battery-chamber cover.
Battery latch
6
Inserting the Battery
Caution
Insert the battery in the correct orientation. Do
NOT use force or attempt to insert the battery
upside down or backwards. The battery will
slide in easily in the correct orientation.
Removing the Battery
After turning the camera off, open the batterychamber cover, press the battery latch to the side,
and slide the battery out of the camera as shown.
First Steps
3 Close the battery-chamber cover.
Battery latch
7
Inserting a Memory Card
Although the camera can store pictures in internal memory, SD memory cards (sold separately) can
be used to store additional pictures.
When no memory card is inserted, d appears in the monitor and internal memory is used for recording
and playback. Note that because camera malfunction could cause internal memory to become
corrupted, the pictures in internal memory should periodically be transferred to a computer and
saved on the computer hard disk or on removable media such as CDs or DVDs. The pictures in
internal memory can also be copied to a memory card (see page 79). To prevent internal memory
from becoming full, be sure to delete pictures when they are no longer needed.
When a memory card is inserted as described below, the card will be used for recording and playback.
■ Compatible Memory Cards
SanDisk SD and SDHC memory cards have been tested and approved for use in the camera. A
complete list of approved memory cards is available at http://www.fujifilm.com/products/digital_
cameras/index.html. Operation is not guaranteed with other cards. The camera can not be used with
MultiMediaCard (MMC) or xD-Picture Cards.
When recording high-definition movies, use a memory card rated at Class 4 (write speed of 4 MB per
second) or higher.
Caution
SD memory cards can be locked, making it impossible to format the card
or to record or delete images. Before inserting an SD memory card, slide
the write-protect switch to the unlocked position.
8
Write-protect
switch
Inserting a Memory Card
■ Inserting a Memory Card
the battery-chamber cover.
1 Open
Open the battery-chamber cover as shown,
shown below, slide it all the way in. Press
firmly until it clicks into place.
Battery
First Steps
sliding the lock lever in the direction of the
arrow.
the memory card.
2 Insert
Holding the memory card in the orientation
Lock lever
Click
Note
Be sure the camera is off before opening the
battery-chamber cover.
Cautions
• Do not turn the camera on or off while the
battery-chamber cover is open. Failure to
observe this precaution could result in damage
to image files or memory cards.
• Do not use excessive force when handling the
battery-chamber cover.
9
Inserting a Memory Card
• Be sure card is at
correct orientation;
do not insert at an
angle or use force.
If the memory card
is not inserted
correctly, images
will be saved in the
internal memory (d will be displayed) instead
of on the memory card.
• If the battery-chamber cover cannot be closed,
do not attempt to close it with excessive force,
check that the card is correctly orientated.
10
3 Close the battery-chamber cover.
Inserting a Memory Card
Removing Memory Cards
Be sure the camera is off before opening the batterychamber cover. Press the card in and then release it
slowly. The card can now be removed by hand.
First Steps
Cautions
• The memory card may spring out if you remove
your finger immediately after pushing the card in.
• Memory cards may be warm to the touch after
being removed from the camera. This is normal
and does not indicate a malfunction.
Cautions
• Format SD memory cards before first use, and be
sure to reformat all memory cards after using them
in a computer or other device. For more information
on formatting memory cards, see page 87.
• Memory cards are small and can be swallowed;
keep out of reach of children. If a child swallows a
memory card, seek medical assistance immediately.
• Do not use miniSD or microSD adapters
that expose the back of the card. Failure
to observe this precaution may cause
damage or malfunction. Adapters that
are larger or smaller than the standard
dimensions of an SD card may not eject normally; if
the card does not eject, take the camera to an
authorized service representative. Do not forcibly
remove the card.
• Do not turn the camera off or remove the memory
card while the memory card is being formatted or
data are being recorded to or deleted from the card.
Failure to observe this precaution could damage the
card.
• Do not affix labels to memory cards. Peeling labels
can cause camera malfunction.
• Movie recording may be interrupted with some
types of SD memory card.
11
Inserting a Memory Card
• The data in internal memory may be erased or
corrupted when the camera is repaired. Please note
that the repairer will be able to view pictures in
internal memory.
• Formatting a memory card or internal memory
in the camera creates a folder in which pictures
are stored. Do not rename or delete this folder or
use a computer or other device to edit, delete, or
rename image files. Always use the camera to delete
pictures from memory cards and internal memory;
before editing or renaming files, copy them to a
computer and edit or rename the copies, not the
originals.
12
Turning the Camera on and Off
Shooting Mode
Playback
y
Mode
To turn the camera on, open the lens cover fully.
The camera turns off when the lens cover is
closed.
To turn the camera on and begin playback, press
the D button for about a second.
First Steps
Camera On
Camera Off
Press the D button again to turn the camera off.
Tip: Switching to Playback Mode
Press the D button to start playback. Press the
shutter button halfway to return to shooting mode.
Tip: Switching to Shooting Mode
To exit to shooting mode, press the shutter button
halfway. Press the D button to return to playback.
Cautions
• Pictures can be affected by fingerprints and other
marks on the lens. Keep the lens clean.
• Closing the cover does not completely cut power to
the camera.
Tip: Auto Power Off
The camera will turn off automatically if no operations are performed for the length of time selected in the
AUTO POWER OFF menu (see page 89).
13
Basic Setup
A language-selection dialog is displayed the first time the camera is turned on. Set up the camera as
described below (for information on resetting the clock or changing languages, see page 83).
1 Choose a language.
2 Set the date and time.
DATE/TIME NOT SET
START MENU
2012
2011
YY.MM.DD
2010
2009
2008
SET
NO
1.1 Press the selector up, down,
left, or right to highlight a
language.
1.2 Press MENU/OK.
SET
12 : 00
AM
NO
2.1 Press the selector left or right
to highlight the year, month,
day, hour, or minute and
press up or down to change.
To change the order in which the year,
month, and day are displayed, highlight
the date format and press the selector
up or down.
2.2 Press MENU/OK.
14
1. 1
Basic Setup
Note
You can change the language or date and time
setting later in the setup menu (pg. 83).
First Steps
Tips: The Camera Clock
• If the battery is removed for an extended period,
the camera clock will be reset and the languageselection dialog will be displayed when the camera
is turned on.
• If the battery is left in the camera for about 24 hours,
the battery can be removed for about 24 hours
without resetting the clock, language selection, or
power management options.
15
Taking Pictures in G (SCENE RECOGNITION) Mode
This section describes how to take pictures in SCENE RECOGNITION mode.
the camera on.
1 Turn
Fully open the lens cover.
Camera On
Basic Photography and Playback
16
SCENE RECOGNITION Mode
By simply aiming the camera at the subject, the
camera determines the shooting conditions and
selects the optimal settings.
the battery level.
2 Check
Check the battery level in the monitor.
1
2
3
4
Indicator
Description
Battery partially discharged.
q (white)
Battery more than half discharged.
w (white)
Low battery. Charge as soon as
e (red)
possible.
r (blinks red) Battery exhausted. Turn camera off
and charge battery.
Taking Pictures in G (SCENE RECOGNITION) Mode
the picture.
3 Frame
Position the main subject in the focus area
and use the zoom buttons to frame the
picture in the monitor.
Press W to zoom out
To prevent pictures that
are out of focus or too
dark (underexposed),
keep your fingers and
other objects away from
the lens and flash.
Basic Photography and Playback
Zoom indicator
Press T to zoom in
Holding the Camera
Hold the camera steady
with both hands and
brace your elbows against
your sides. Shaking or
unsteady hands can blur
your shots.
Tip: Focus Lock
Use focus lock (pg. 30) to focus on subjects that are not in the focus frame.
17
Taking Pictures in G (SCENE RECOGNITION) Mode
Simply by pointing the camera at the subject,
the camera automatically analyzes and selects
the most appropriate setting using scene
recognition.
The camera analyzes a
subject based on scene
recognition, then an icon
appears in the bottom
PORTRAIT
PORTRAI
left of the monitor. (The
illustration shows camera
analysis of a portrait subject.)
Subject
Icon
PORTRAIT
H
LANDSCAPE
I
NIGHT
J
MACRO
K
BACKLIT
PORTRAIT
T
NIGHT
PORTRAIT
Z
Description
For soft-toned portraits with
natural skin tones.
For crisp, clear daylight shots of
buildings and landscapes.
For night and twilight scenes,
using a high sensitivity setting
to minimize blurring.
For clear close-ups of flowers,
etc.
For a subject backlit against the
sun, preventing the background
from becoming dim.
For a subject in a dim place,
reducing blur.
Tip
When a subject can not be analyzed by the camera,
LAUTO mode will be set.
Notes
• B Intelligent Face Detection is turned on
automatically.
• The camera continuously adjusts focus on a face, or
the center area of the monitor.
• Continuous auto focus will be audible and battery
drain will increase.
18
Taking Pictures in G (SCENE RECOGNITION) Mode
Focus.
4 Press
the shutter button halfway to focus on
button the rest of the way down
to take the picture.
the subject.
F4.0
F4 0
F4.
Camera selects small
focus frame and
Press
focuses on subject
halfway
Tip: The Shutter Button
The shutter button has two positions. Pressing the
shutter button halfway sets focus and exposure; to
shoot, press the shutter button the rest of the way
down.
Double
beep
Click
If the camera is able to focus, it will beep twice.
If the camera is unable to focus, the focus frame
will turn red and R will be displayed.
Note
The lens may make a noise when the camera focuses.
This is normal.
Press
halfway
Press the rest of the
way down
Note
If the subject is poorly lit, the flash may fire when the
picture is taken. To take pictures without the flash,
choose another flash mode (pg. 35).
Basic Photography and Playback
1/25
1/250
Focus frame
Shoot.
5 Smoothly
press the shutter
19
Taking Pictures in G (SCENE RECOGNITION) Mode
The Framing Grid
To display best framing (the framing grid) or to view
or hide other indicators in the monitor, press the
DISP/BACK button.
Indicators
displayed
Indicators
hidden
Best framing
To use best framing, position the main subject at
the intersection of two lines or align one of the
horizontal lines with the horizon. Use focus lock (pg.
30) to focus on subjects that will not be in the center
of the frame in the final photograph.
20
Viewing Pictures
Pictures can be viewed in the monitor. When taking important photographs, take a test shot and
check the results.
1 Press the D button.
The most recent picture will be displayed in
the monitor.
ERASE OK?
YES
CANCEL
100 0001
ISO
SO
100
N
SET
12 / 31 / 2050
1/250
F4.0
10 : 00 AM
-11 2 3
View additional pictures.
2 Press
the selector right to view
pictures in the order recorded,
left to view pictures in reverse
order.
To delete the picture, press the selector
up to highlight YES and press MENU/OK.
To exit without deleting the picture,
highlight CANCEL and press MENU/OK.
Tip: The Playback Menu
Pictures can also be deleted from the playback
menu (pg. 43).
Basic Photography and Playback
Deleting Pictures
To delete the picture
currently displayed in
the monitor, press the
selector up (I). The
following dialog will be
displayed.
Press the shutter button to exit to shooting
mode.
21
A Shooting Mode
Choose a shooting mode according to the scene or type of subject.
Selecting
g a Shooting
g Mode
MENU/OK to display the
1 Press
shooting menu.
SHOOTING MENU
SHOOTING MODE
ISO
IMAGE SIZE
IMAGE QUALITY
FINEPIX COLOR
WHITE BALANCE
1/2
AUTO
More on Photography
the selector up or down to
2 Press
highlight A SHOOTING MODE.
the selector right to display
3 Press
shooting mode options.
Selects optimum
camera settings
for certain modes.
SET
CANCEL
22
MENU/OK to select the
5 Press
highlighted option.
N
c
AUTO
COMPLETED
SCENE RECOGNITION
the selector up or down to
4 Press
highlight the desired mode.
SR
g Digital IS
If the subject is poorly lit, blurring caused by camera
shake can be reduced by activating the g DIGITAL
IS (pg. 84). Note that blurring may still occur
depending on the scene or shooting conditions.
A Shooting Mode
Shooting Modes
G SCENE RECOGNITION
Simply by pointing the camera at the subject,
the camera automatically analyzes and selects
the most appropriate setting using scene
recognition.
For more information, see “Taking Pictures in G
(SCENE RECOGNITION) Mode” (pg. 16).
P PROGRAM AE
Choose this mode for complete control
of shooting settings, including exposure
compensation (pg. 32), white balance (pg. 65),
and AF mode (pg. 66).
Notes
• Do not use where flash photography is prohibited.
The flash fires even in silent mode (pg. 36).
• Only available if memory remains for two pictures.
• Continuous shooting is not available.
More on Photography
k AUTO
Choose for crisp, clear snapshot. This mode is
recommended in most situations.
A NATURAL & K (Dual Shot Mode)
This mode helps ensure good results with backlit
subjects and in other situations with difficult
lighting. Each time the shutter button is pressed,
the camera takes two shots: one shot without
the flash to preserve natural lighting, followed
immediately by a second shot with the flash. Do
not move the camera until shooting is complete.
23
A Shooting Mode
B NATURAL LIGHT
Capture natural light indoors, under low light, or
where the flash can not be used. The flash turns
off and sensitivity is raised to reduce blur.
L SPORT
Choose this mode when photographing moving
subjects. Priority is given to faster shutter
speeds.
C PORTRAIT
Choose this mode for soft-toned portraits with
natural skin tones.
D NIGHT
A high sensitivity setting is selected
automatically to minimize blurring for recording
night and twilight scenes.
V PORTRAIT ENHANCER
Choose for a smooth skin effect in soft-focus
portraits.
K LANDSCAPE
Choose this mode for crisp, clear daylight shots
of buildings and landscapes.
24
U NIGHT (TRIPOD)
Slow shutter speeds are used to record night
scenes. Use of a tripod is recommended to
prevent camera shake.
E SUNSET
Choose this mode to record the vivid colors in
sunrises and sunsets.
A Shooting Mode
F SNOW
Choose for crisp, clear shots that capture the
brightness of scenes dominated by shining white
snow.
O FLOWER
Choose for vivid close-ups of flowers. The
camera focuses in the macro range and the flash
turns off automatically.
G BEACH
Choose for crisp, clear shots that capture the
brightness of sunlit beaches.
P TEXT
Take clear pictures of text or drawings in print.
The camera focuses in the macro range.
More on Photography
I PARTY
Capture indoor background lighting under lowlight conditions.
25
A Shooting Mode
N AUCTION MODE
Choose this mode to combine up to four
consecutive shots in a single image 640 × 480
pixels in size (p). This can be used to record
an object from different angles when posting
pictures to a web auction. To take pictures in
auction mode:
1 Select N AUCTION MODE.
the selector up to display the
2 Press
following layout options:
1
1
2
1
2
1
3
3
2
4
the selector left or right to
3 Press
highlight an option.
MENU/OK to select the
4 Press
highlighted option.
a picture. The picture will
5 Take
appear in the first frame in layout.
26
MENU/OK to proceed to the
6 Press
next picture. Repeat steps 5 and 6
until all the frames are filled.
R SUCCESSIVE MOVIE
Join a series of movie clips into a single movie
(pp. 46–47).
B Intelligent Face Detection and Red-Eye Removal
Intelligent Face Detection allows the camera to automatically detect human faces and set focus and
exposure for a face anywhere in the frame for shots that emphasize portrait subjects. Choose for
group portraits to prevent the camera from focusing on the background. Intelligent Face Detection
also offers a red-eye removal option for removing “red-eye” effects caused by the flash.
1 Turn Intelligent Face Detection on.
1.1 Press MENU/OK to display the
shooting menu.
SHOOTING MENU
1/2
AUTO
N
c
AUTO
COMPLETED
1.2 Press the selector up or
down to highlight 3 FACE
DETECTION.
Description
Intelligent Face Detection off.
Intelligent Face Detection on.
1.5 Press MENU/OK to select the
highlighted option and return
to shooting mode.
A B icon appears in the
monitor when Intelligent Face
Detection is on.
Note
When removing red-eye effect, select ON for a RED
EYE REMOVAL in the setup menu (pg. 84).
More on Photography
SHOOTING MODE
ISO
IMAGE SIZE
IMAGE QUALITY
FINEPIX COLOR
WHITE BALANCE
Option
OFF
ON
1.3 Press the selector right
to display Intelligent Face
Detection options.
1.4 Press the selector up or down
to highlight the desired option.
27
B Intelligent Face Detection and Red-Eye Removal
the picture.
2 Frame
If a face is detected, it will be indicated by
a green border. If there is more than one
face in the frame, the camera will select the
face closest to the center; other faces are
indicated by white borders.
Green border
Focus.
3 Press
the shutter button halfway
to set focus and exposure for
the subject in the green border.
28
Shoot.
4 Press
the shutter button all the
way down to shoot.
Intelligent Face Detection
Intelligent Face Detection is
recommended when using the
self-timer for group portraits or
self-portraits (pg. 37).
5
When a picture taken with Intelligent Face Detection
is displayed, the camera can automatically select
faces for image search (pg. 68), slide shows (pg. 74),
cropping (pg. 76), red-eye removal (pg. 74), printing
(pg. 51), and zoom (continuous) (pg. 87).
B Intelligent Face Detection and Red-Eye Removal
Tip: Red-Eye Removal
Select ON for the R SAVE ORG IMAGE option in the
setup menu (pg. 85) to save unprocessed copies of
pictures created with red-eye removal.
More on Photography
Cautions
• If no face is detected when the shutter-release
button is pressed halfway (pg. 95), the camera will
focus on the subject at the center of the monitor
and red-eye will not be removed. If the camera
is unable to detect a face, turn Intelligent Face
Detection off and use focus lock (pg. 30).
• If the subject moves as the shutter button is pressed,
their face may not be in the area indicated by the
green border when the picture is taken.
• In each shooting mode, the camera will detect and
focus on faces but exposure will be optimized for the
entire scene rather than the selected portrait subject.
29
Focus Lock
To compose photographs with off-center subjects:
1 Position the subject in the focus frame.
the picture.
3 Recompose
Keeping the shutter button pressed
halfway, recompose the picture.
Focus.
2 Press
the shutter button halfway to set
focus and exposure. Focus and exposure
will remain locked while the shutter button
is pressed halfway (AF/AE lock).
Press
halfway
250
F4 0
F4.0
Repeat steps 1 and 2 as desired to refocus
before taking the picture.
30
250
F4 0
F4.0
Shoot.
4 Press
the shutter-release button the rest of
the way down to take the picture.
Press the rest of
the way down
Focus Lock
Autofocus
Although the camera boasts a high-precision autofocus system, it may be unable to focus on the subjects
listed below. If the camera is unable to focus using autofocus, use focus lock (pg. 30) to focus on another
subject at the same distance and then recompose the photograph.
• Very shiny subjects such as mirrors or car bodies.
• Fast-moving subjects.
Subjects photographed through a window or other reflective object.
Dark subjects and subjects that absorb rather than reflect light, such as hair or fur.
Insubstantial subjects, such as smoke or flame.
Subjects that show little contrast with the background (for example, subjects in clothing that is the same
color as the background).
• Subjects positioned in front of or behind a high-contrast object that is also in the focus frame (for example, a
subject photographed against a backdrop of highly contrasting elements).
More on Photography
•
•
•
•
31
5 Exposure Compensation
Use exposure compensation when photographing very bright, very dark, or high-contrast subjects.
Press 5 (exposure compensation).
1 The
exposure indicator will be displayed.
to shooting mode.
3 Return
Press MENU/OK to return to
shooting mode.
4 Take pictures.
1000
SET
F4.0
a value.
2 Choose
Press the selector button. The effect is
visible in the display.
Choose positive (+) values
to increase exposure
Choose negative (–) values
to reduce exposure
32
A Note
A 5 icon and exposure indicator are displayed at
settings other than ±0. Exposure compensation is not
reset when the camera is turned off; to restore normal
exposure control, choose a value of ±0.
5 Exposure Compensation
Choosing an Exposure Compensation Value
• Backlit subjects: choose values from +2/3 EV to +12/3 EV (for an explanation of the term “EV”,
see the Glossary on page 104)
• Highly reflective subjects or very bright scenes (e.g., snowfields): +1 EV
More on Photography
• Scenes that are mostly sky: +1 EV
• Spotlit subjects (particularly if photographed against dark backgrounds): –2/3 EV
• Subjects with low reflectivity (pine trees or dark-colored foliage): –2/3 EV
33
L Macro mode (Close-ups)
To select macro mode, press the selector left (L).
19
N
L icon appears in
monitor when camera
is in macro mode
When macro mode is in effect, the camera focuses on subjects near the center of the monitor. Use
the zoom buttons to frame pictures.
Note
Use of a tripod is recommended to prevent blur caused by camera shake.
34
K Using the Flash (Intelligent Flash)
When the flash is used, the camera’s Intelligent Flash system instantly analyzes the scene based on
such factors as the brightness of the subject, its position in the frame, and its distance from the
camera. Flash output and sensitivity are adjusted to ensure that the main subject is correctly exposed
while preserving the effects of ambient background lighting, even in dimly-lit indoor scenes. Use the
flash when lighting is poor, for example when shooting at night or indoors under low light.
To choose a flash mode, press the selector right (K). In modes other than
AUTO, the current mode is indicated by an icon in the monitor. Choose
from the following options (some options are not available in all shooting
modes):
More on Photography
Mode
Description
AUTO (no icon) The flash fires when required. Recommended in most situations.
The flash fires whenever a picture is taken. Use for backlit subjects or for natural coloration
K (fill flash)
when shooting in bright light.
W (suppressed The flash does not fire even when the subject is poorly lit. 0 will appear in the monitor at
slow shutter speeds to warn that pictures may be blurred. Use of a tripod is recommended.
flash)
Capture both the main subject and the background when shooting at night (note that
T (slow sync) brightly lit scenes may be overexposed). If U is selected for A SHOOTING MODE, shutter
speed may be slow. Use a tripod.
Caution
The flash may fire several times with each shot. Do not move the camera until shooting is complete.
35
K Using the Flash (Intelligent Flash)
Red-Eye Removal
If intelligent face detection is selected in the
shooting menu (pg. 27) while a RED EYE
REMOVAL is set to ON in the setup menu (pg. 84),
red-eye removal is used for pictures taken when the
flash fires. Red-eye removal minimizes
“red-eye” caused when light from the
flash is reflected from the subject’s
retinas as shown in the illustration at
right.
U Silent Mode
Silent mode is useful in situations in which camera
sounds or the light of the flash may be unwelcome.
To turn silent mode on, press and hold the DISP/BACK
button until U is displayed, or change the setting in
the setup menu (pg. 84).
While silent mode is turned on, the flash does not
fire (except when using A mode), operation
sounds and the shutter sound are not heard, the
sound is muted when playing back movies or voice
memos, and the self-timer lamp and shooting
indicator do not light.
• U is displayed while silent mode is turned on.
• Press and hold the DISP/BACK button to turn silent
mode off.
• Flash, operation sounds (pg. 84), shutter sound
(pg. 84), and playback volume (pg. 89) settings
cannot be changed while silent mode is turned on.
• Silent mode cannot be turned on or off while
playing back movies or voice memos.
36
J Using the Self-Timer
The camera offers four types of self-timer mode,
which enable group portraits, self-portraits and
reduction of camera shake.
Setting the Self-Timer
To change the self-timer mode, press J.
COUPLE TIMER
The picture is taken automatically when 2 faces
come close together.
Set the self-timer mode to x COUPLE TIMER.
Press E. Each time E is pressed, the setting for
z DISTANCE changes.
19
yN
CANCEL
The more z icons, the closer the 2 faces must
be when taking a picture.
As the 2 faces come closer and the z
indicator(s) becomes full, countdown starts.
Then the picture is automatically taken.
More on Photography
z
: NEAR
zz
: CLOSE UP
zzz : SUPER CLOSE
Tips
• Pressing DISP/BACK cancels x COUPLE TIMER.
• Set Macro mode (close-up) when taking a self
portrait by holding the camera.
37
J Using the Self-Timer
GROUP TIMER
10 SEC/ 2 SEC
The picture is taken automatically when all
members get together.
Set the self-timer mode to y GROUP TIMER.
Press E. Each time E is pressed, the setting for
S NUMBERS changes.
Set the self-timer mode to c 10 SEC or b 2
SEC.
Focus.
Press the shutter button halfway
to focus.
19
N
Available setting for Group
timer is 1 to 4 persons.
CANCEL
When the camera recognizes the set number
of persons and the S indicator(s) becomes
full, countdown starts. Then the picture is
automatically taken.
Tips
• Pressing DISP/BACK cancels y GROUP TIMER.
• Set Macro mode (close-up) when taking a self
portrait by holding the camera.
38
1
Caution
Stand behind the camera when using the
shutter button. Standing in front of the lens can
interfere with focus and exposure.
the timer.
2 Start
Press the shutter button the
rest of the way down to start
the timer. The display
in the monitor shows
9
the number of seconds
remaining until the
shutter is released. To
stop the timer before
the picture is taken,
press DISP/BACK.
J Using the Self-Timer
The self-timer lamp on the front of the
camera will blink immediately before the
picture is taken. If the two-second timer
is selected, the self-timer lamp will blink as
the timer counts down.
More on Photography
Intelligent Face Detection
Because it ensures that the faces of portrait
subjects will be in focus, Intelligent Face Detection
(pg. 27) is recommended when using the self-timer
for group portraits or self-portraits. To use the selftimer with Intelligent Face Detection, set the timer
as described in Step 1 and then press the shutter
button all the way down to start the timer. The
camera will detect faces while the timer is counting
down and adjust focus and exposure immediately
before the shutter is released. Be careful not to
move until the picture has been recorded.
39
Single-Frame Playback
To view the most recent picture in the monitor,
press the D button.
Choosing a Display Format
Press the DISP/BACK button to turn playback
indicators on and off.
100 0001
ISO
SO
100
N
12 / 31 / 2050
1/250
F4.0
More on Playback
Press the selector right to view
pictures in the order recorded, left to
view pictures in reverse order. Keep
the selector pressed to scroll rapidly
to the desired frame.
10 : 00 AM
-11 2 3
100-0001
100
0001
ISO
SO
100
N
12 / 31 / 2050
F4 0
1/250
F4.0
10 : 00 AM
-11 2 3
Indicators displayed
Indicators hidden
Image search
You can use the image search feature to
search for pictures based on a variety of search
criteria. See IMAGE SEARCH (pg. 68) for more
information.
Note
Pictures taken using other cameras are indicated by a e (“gift image”) icon during playback.
40
Single-Frame Playback
Playback
y
Zoom
Press T to zoom in on images
displayed in single-frame playback;
press W to zoom out.
Press W to zoom out
Press T to zoom in
Zoom indicator
Navigation window shows
portion of image currently
displayed in monitor
Intelligent Face Detection
If the current picture was
taken using Intelligent Face
Detection (pg. 27), B will
appear in the monitor. Press
FACE ZOOM
BACK
the F button to cycle
through the subjects detected by Intelligent Face
Detection, or use the W and T buttons to zoom the
current subject in and out as described above.
More on Playback
When the picture is zoomed in, the
selector can be used to view areas of
the image not currently visible in the
display.
Note
The maximum zoom ratio varies with image size.
Playback zoom is not available with pictures taken
in N mode or at an image size of p, or v blog
images.
Press DISP/BACK to exit zoom.
41
Multi-Frame Playback
To change the number of images
displayed, press W when a picture is
shown full-frame in the monitor.
Tip: Two-Frame Display
Two-frame display can be used
to compare pictures taken in
A NATURAL & K (dual shot)
mode.
12 / 31 /2050
20 0 10 : 00 AM
Press the
W button
to increase
the number
of pictures
displayed to
two, nine, or a
hundred.
42
Use the selector to highlight images and press
MENU/OK to view the highlighted image full frame.
In the nine- and hundred-frame displays, press
the selector up or down to view more pictures.
Press T to reduce
the number
of images
displayed.
M Deleting Pictures
The ERASE option in the playback menu can be used to delete still pictures and movies, increasing
the amount of space available on the memory card or in internal memory (for information on
deleting pictures in single-frame playback, see page 21). Note that deleted pictures can not be
recovered. Copy important pictures to a computer or other storage device before proceeding.
MENU/OK to display the
1 Press
playback menu.
PLAYBACK MENU
SET
the selector up or down to
4 Press
highlight FRAME or ALL FRAMES.
1 /3
IMAGE SEARCH
ERASE
EDIT FOR BLOG
MARK FOR UPLOAD TO
SLIDE SHOW
RED EYE REMOVAL
MENU/OK to display options for
5 Press
the selected item (see pg. 44).
COMPLETED
the selector right to display
3 Press
delete options.
PLAYBACK MENU
SET
1/2
Tips: Deleting Pictures
• When a memory card is inserted, pictures will be
deleted from the memory card; otherwise, pictures
will be deleted from internal memory.
• Protected pictures can not be deleted. Remove
protection from any pictures you wish to delete (pg.
75).
• If a message appears stating that the selected
images are part of a DPOF print order, press MENU/OK
to delete the pictures.
More on Playback
the selector up or down to
2 Press
highlight M ERASE.
IMAG
ERAS
BACK
EDIT FRAME
MARK ALL FRAMES
SLIDE
RED
43
M Deleting Pictures
■ FRAME: Deleting Selected Images
Selecting FRAME displays the
dialog shown at right.
■ ALL FRAMES: Deleting All Images
ERASE OK?
Selecting ALL FRAMES
displays the confirmation
YES
shown at right.
CANCEL
ERASE OK?
SET
Press the selector left or right
to scroll through pictures and
press MENU/OK to delete the
current picture (the picture
is deleted immediately; be
careful not delete the wrong
picture).
Press DISP/BACK to exit when all the desired
pictures have been deleted.
44
SET
CANCEL
Press MENU/OK to delete all
unprotected pictures.
The dialog shown at right is
displayed during deletion.
Press DISP/BACK to cancel
before all pictures have
been deleted (any pictures
deleted before the button
was pressed can not be
recovered).
CANCEL
A Recording Movies
The A button can be used to shoot short movies in all shooting modes except N. Sound is
recorded via the built-in microphone; do not cover the microphone during recording.
Press the A button to start
2 recording.
the scene using the zoom
1 Frame
buttons.
Zoom indicator
REC
12s
1
and time
remaining are
displayed in
monitor
Optical zoom can not be adjusted once
recording begins.
/2
Press the A button again to
3 end
recording. Recording ends
automatically when the movie
reaches maximum length or
memory is full.
Movies
Choosing the Frame Size
SHOOTING MENU
To choose the frame size,
2
CONT
press MENU/OK and select
FACE
1280 5m00s
AF M
10m59s
d MOVIE QUALITY.
MOVI
15m00s
Choose ) 1280 (1280×720
pixels) for high-definition
movies, ! (640 × 480 pixels) for standard
quality, 9 (320 × 240 pixels) for longer movies.
Press MENU/OK to return to movie recording
mode.
45
A Recording Movies
Notes
• See below for information on recording movies in
R mode.
• Focus is set when recording begins; exposure
and white balance are adjusted automatically
throughout recording. The color and brightness
of the image may vary from that displayed before
recording begins.
• Any sound that the camera makes while recording a
movie may be heard when playing back the movie.
• If the subject is too bright, horizontal or vertical lines
may be seen when playing back the movie. This is
not a malfunction.
the A button to begin
3 Press
recording a clip.
R Successive Movie
the A button again to
4 Press
end the clip. Repeat steps 3
Join a series of movies into one movie (up to 60
seconds long).
using shooting mode (pg. 22), select
1 While
R SUCCESSIVE MOVIE and press MENU/OK.
DISP/BACK to turn successive movie
2 Press
mode on and off.
46
REC
1 and time
remaining are displayed in
monitor. Time remaining
displayed in yellow if less
than 5 s remain.
Note
If a clip reaches maximum length, shooting will
end and the clips recorded to that point will be
joined together into a single movie.
and 4 to record additional clips.
To pause, press MENU/OK.
Do not insert or remove memory cards
while recording is paused. While recording
is paused, the camera can be turned off or
other modes selected. Recording can be
resumed as described below.
A Recording Movies
Tip: Previewing the Most Recent Clip
When a clip is completed,
the first frame appears in the
monitor. To preview the clip,
press the selector up. Press
RECORD
FINISH
DISP/BACK to re-record the last
clip.
15s
STANDBY
1280
PREVIEW
RETRY
Press F to display the
5 confi
rmation message, select
OK, then press MENU/OK to end
recording and join the clips
together.
Tip: During Recording
When recording is resumed,
the three most recent clips are
shown in the monitor, with the
most recent clip at the top.
Movies
Resuming Recording
To resume a paused successive movie, select
R SUCCESSIVE MOVIE for A SHOOTING
MODE and highlight CONTINUE. Press MENU/OK
and continue recording as described in steps 2–5.
15s
STANDBY
1280
RECORD
FINISH
47
D Viewing Movies
During playback (pg. 40),
movies are displayed in the
monitor as shown at right.
The following operations
can be performed while a
movie is displayed:
100 006
100-006
1280
15s
12 / 31 / 2050 10 : 00 AM
PLAY
Operation
Description
Start/pause Press the selector down to start playback.
playback Press again to pause.
Press the selector up to end playback. If
End
playback is not in progress, pressing
playback/
the selector up will delete the current
delete
movie.
Press the selector right to advance, left
to rewind. If playback is paused,
Advance/
the movie will advance or rewind
rewind
one frame each time the selector is
pressed.
Press MENU/OK to pause playback and
display volume controls. Press the
Adjust
selector up or down to adjust the
volume
volume; press MENU/OK again to set the
volume.
48
Progress is shown in the monitor during playback.
STOP
PAUSE
Progress bar
Tip: Viewing Movies on a Computer
Copy movies to the computer before viewing.
Note
Fast forward and rewind are not available.
Cautions
Do not cover the speaker during playback.
Viewing Pictures on TV
Connect the camera to a TV and tune the television to the video channel to show pictures and slide
shows (pg. 74) to a group.
an A/V cable (optional), as shown
1 Connect
below.
Connect yellow plug
to video-in jack
Connect white plug
Insert into multi-connector to audio-in jack
adapter port
the television to the video channel.
2 Tune
The camera monitor turns off and pictures,
Press the D for about a second to turn the
3 camera
on.
Cautions
• When making the A/V cable connection, be sure the
connectors are fully inserted.
• If the optional A/V cable is used to connect the
camera to the TV, high-definition movies will be
displayed in standard definition.
• An optional video cable is required to view highdefinition movies on a high-definition TV. For more
information, refer to: http://www.fujifilm.com/
products/digital_cameras/index html.
Connections
voice memos, and movies are played back on
the TV. Note that the camera volume controls
have no effect on sounds through the TV; use
the television volume controls to adjust the
volume.
Note
Image quality deteriorates slightly during movie
playback.
49
Printing Pictures via USB
If the printer supports PictBridge, the camera can be connected directly to a printer and
pictures can be printed without first being copied to a computer. Note that depending
on the printer, not all the functions described below may be supported.
Connecting the Camera
Printing Selected Pictures
Press the D for about a second to turn the
1 camera
on.
the selector left or right to
1 Press
display a picture you wish to print.
Note
Be sure the battery is inserted for proper connection.
the supplied USB cable as shown
2 Connect
and turn the printer on.
the selector up or down to
2 Press
choose the number of copies (up to
99).
steps 1–2 to select
3 Repeat
additional pictures. Press MENU/OK
to display a confirmation dialog
when settings are complete.
w USB will be displayed in the monitor,
followed by the PictBridge display shown
below at right.
USB
PICTBRIDGE
TOTAL : 00000
YES
50
CANCEL
4 Press MENU/OK to start printing.
00 SHEETS
FRAME
OK
PR NT THESE FRAMES
TOTAL : 9 SHEETS
SET
Printing Pictures via USB
Tip: Printing the Date of Recording
To print the date of recording on pictures, press
DISP/BACK in steps 1–2 to display the PictBridge
menu (see “Printing the DPOF Print Order,” below).
Press the selector up or down to highlight PRINT
WITH DATE y and press MENU/OK to return to the
PictBridge display (to print pictures without the date
of recording, select PRINT WITHOUT DATE). The
date will not be printed if the camera clock was not
set when the picture was taken.
Note
If no pictures are selected when the MENU/OK button is
pressed, the camera will print one copy of the current
picture.
Printing the DPOF Print Order
To print the print order created with r PRINT
ORDER (DPOF) in the playback menu (pg. 53):
display, press DISP/
1 InBACKthetoPictBridge
open the PictBridge menu.
PICTBRIDGE
PRINT WITH DATE
PRINT WITHOUT DATE
PRINT DPOF
the selector up or down to
2 Press
highlight x PRINT DPOF.
PRINT DPOF OK?
TOTAL : 9 SHEETS
YES
Connections
MENU/OK to display a
3 Press
confirmation dialog.
CANCEL
4 Press MENU/OK to start printing.
51
Printing Pictures via USB
During Printing
The message shown at right is
PRINTING
displayed during printing. Press
DISP/BACK to cancel before all
pictures are printed (depending
CANCEL
on the printer, printing may end
before the current picture has printed).
If Printing is interrupted, disconnect the USB cable
from the camera, turn off the camera, and then
repeat the steps on page 50.
Disconnecting the Camera
Confirm that “PRINTING” is not displayed in the
monitor and disconnect the USB cable.
52
Notes
• Print pictures from internal memory or a memory
card that has been formatted in the camera.
• If the printer does not support date printing, the
PRINT WITH DATE y option will not be available
in the PictBridge menu and the date will not be
printed on the pictures in the DPOF print order.
• Default border/borderless setting, printer page size
and print quality settings are used when printing via
direct USB connection.
Printing Pictures via USB
Creating a DPOF Print Order
The r PRINT ORDER (DPOF) option in the
playback menu can be used to create a digital
“print order” for PictBridge-compatible printers
(pg. 50) or devices that support DPOF.
DPOF
DPOF (Digital Print Order Format) is standard
that allows pictures to be printed from
“print orders” stored in internal memory
or on a memory card. The information in the order
includes the pictures to be printed and the number
of copies of each picture.
PLAYBACK MENU
TRAN
MOVI WITH DATE
PRINT WITHOUT DATE
RESET ALL
SET
3 /3
WITH DATE y: Print date of
recording on pictures.
the selector left or right
1 Press
to display a picture you wish to
include in or remove from the print
order.
the selector up or down to
2 Press
choose the number of copies (up to
99). To remove a picture from the
order, press the selector down until
the number of copies is 0.
PRINT ORDER (DPOF)
DPOF:00001
Total number of prints
Number of copies
01 SHEETS
FRAME
SET
Tip: Intelligent Face Detection
If the current picture was created with Intelligent Face
Detection, pressing F sets the number of copies to
the number of faces detected.
Connections
■ WITH DATE y / WITHOUT DATE
To modify the DPOF print order, select r PRINT
ORDER (DPOF) in the playback menu and press
the multi selector up or down to highlight WITH
DATE y or WITHOUT DATE.
Press MENU/OK and follow the steps below.
WITHOUT DATE: Print pictures
without date.
53
Printing Pictures via USB
■ RESET ALL
RESET DPOF OK?
To cancel the current print
order, select RESET ALL in the
r PRINT ORDER (DPOF)
menu. The confirmation
YES
CANCEL
shown at right will be
displayed; press MENU/OK to remove all pictures
from the order.
steps 1–2 to complete the
3 Repeat
print order. Press MENU/OK to save
the print order when settings
are complete, or DISP/BACK to exit
without changing the print order.
total number of prints is
4 The
displayed in the monitor. Press
MENU/OK to exit.
The pictures in the current
print order are indicated by a
x icon during playback.
100 0001
100
N
12 / 31 / 2050
1/250
F4.0
54
10 : 00 AM
123
Notes
• Remove the memory card to create or modify a print
order for the pictures in internal memory.
• Print orders can contain a maximum of 999 pictures.
RESET DPOF OK?
• If a memory card is inserted
containing a print order created
by another camera, the message
shown at right will be displayed.
YES
NO
Pressing MENU/OK cancels the
print order; a new print order must be created as
described above.
• The printer’s settings may determine whether
shooting dates are printed or not printed. Check the
printer’s settings if necessary.
Viewing Pictures on a Computer
The supplied software can be used to copy pictures to a computer, where they can be stored,
viewed, organized, and printed. Before proceeding, install the software as described below. Do NOT
connect the camera to the computer until installation is complete.
Installing the Software
Two applications are supplied: MyFinePix Studio for Windows and FinePixViewer for the Macintosh.
Installation instructions for Windows are on pages 55–56, those for the Macintosh on pages 57–58.
Windows: Installing My FinePix Studio
Confirm that the computer meets the following system requirements:
1
CPU
RAM
Free disk space
Video
Other
•
•
•
•
* Other versions of Windows are not supported. Only pre-installed operating systems are supported;
operation is not guaranteed on home-built computers or computers that have been upgraded from earlier
versions of Windows.
Connections
Windows 7*
Windows Vista*
V sta*
Windows XP*
3 GHz Pentium 4 or better
2 GHz Pentium 4 or better
1 GB or more
512 MB or more
15 GB or more
2 GB or more
1024 × 768 pixels or more with 24-bit color or better
A graphics processing unit (GPU) that supports DirectX 7 or later
Built-in USB port recommended. Operation is not guaranteed other USB ports.
Internet connection (56 kbps or faster recommended) required to use FinePix Internet Service; Internet
connection and e-mail software required to use e-mail option
55
Viewing Pictures on a Computer
2 Start the computer. Log in to an account with administrator privileges before proceeding.
3 Exit any applications that may be running and insert the installer CD in a CD-ROM drive.
Windows 7/Windows Vista
If an AutoPlay dialog is displayed, click SETUP.exe. A “User Account Control” dialog will then be displayed;
click Yes (Windows 7) or Allow (Windows Vista).
The installer will start automatically; click Install MyFinePix Studio and follow the on-screen instructions to install MyFinePix Studio.
If the Installer Does Not Start Automatically
If the installer does not start automatically, select Computer or My Computer from the Start menu, then
double-click the FINEPIX CD icon to open the FINEPIX CD window and double-click SETUP or SETUP.exe.
prompted to install Windows Media Player or DirectX, follow the on-screen instructions to com4 Ifplete
installation.
the installer CD from the CD-ROM drive when installation is complete. Store the installer
5 Remove
CD in a dry location out of direct sunlight in case you need to re-install the software. The
version number is printed at the top of the CD label for reference when updating the software or
contacting customer support.
Installation is now complete. Proceed to “Connecting the Camera” on page 59.
56
Viewing Pictures on a Computer
Macintosh: Installing FinePixViewer
Confirm that the computer meets the following system requirements:
1
CPU
PowerPC or Intel
Pre-installed versions of Mac OS X version 10.3.9–10.6
OS
(for the latest information, visit http://www.fujifilm.com/)
RAM
256 MB or more
Free disk space A minimum of 200 MB required for installation with 400 MB available when FinePixViewer is running
Video
800 × 600 pixels or more with thousands of colors or better
• Built-in USB port recommended. Operation is not guaranteed other USB ports.
Other
• Internet connection (56 kbps or faster recommended) required to use FinePix Internet Service; Internet
connection and e-mail software required to use e-mail option
starting the computer and quitting any applications that may be running, insert the installer
2 After
CD in a CD-ROM drive and double-click Installer for Mac OS X.
installer dialog will be displayed; click Installing FinePixViewer to start installation. Enter
3 An
an administrator name and password when prompted and click OK, then follow the on-screen
instructions to install FinePixViewer. Click Exit to quit the installer when installation is complete.
Connections
57
Viewing Pictures on a Computer
the installer CD from the CD-ROM drive. Note that you may be unable to remove the CD
4 Remove
if Safari is running; if necessary, quit Safari before removing the CD. Store the installer CD in a dry
location out of direct sunlight in case you need to re-install the software. The version number
is printed at the top of the CD label for reference when updating the software or contacting
customer support.
OS X 10.5 or earlier: Open the “Applications” folder, start Image Capture, and select
5 Mac
Preferences… from the Image Capture application menu. The Image Capture preferences dialog
will be displayed; choose Other… in the When a camera is connected, open menu, then select
FPVBridge in the “Applications/FinePixViewer” folder and click Open. Quit Image Capture.
Mac OS X 10.6: Connect the camera and turn it on. Open the “Applications” folder and start Image
Capture. The camera will be listed under DEVICES; select the camera and choose FPVBridge
from the Connecting this camera opens menu and click Open. Quit Image Capture.
Installation is now complete. Proceed to “Connecting the Camera” on page 59.
58
Viewing Pictures on a Computer
Connecting the Camera
pictures you wish to copy are stored
1 Ifonthea memory
card, insert the card into the
camera (pg. 9). If no card is inserted, pictures
will be copied from internal memory.
Note
Windows users may require the Windows CD
when starting the software for the first time.
Caution
Loss of power during transfer could result in loss
of data or damage to internal memory or the
memory card. Check the battery level.
Turn the camera off and connect the supplied
2 USB
cable as shown, making sure the
FinePixViewer will start automatically; follow
the on-screen instructions to copy pictures
to the computer. To exit without copying
pictures, click Cancel.
Caution
If the software does not start automatically, it may not
be correctly installed. Disconnect the camera and
reinstall the software.
For more information on using the supplied software,
start the application and select the appropriate option
from the Help menu.
Connections
connectors are fully inserted. Connect the
camera directly to the computer; do not use a
USB hub or keyboard.
the D for about a second to turn
3 Press
the camera on. MyFinePix Studio or
59
Viewing Pictures on a Computer
Cautions
• If a memory card containing a large number of
images is inserted, there may be a delay before the
software starts and you may be unable to import or
save images.
Use a memory card reader to transfer pictures.
• Opening or closing the lens cover during transfer
could result in loss of data or damage to internal
memory or the memory card.
• Disconnect the camera before inserting or removing
memory cards.
• In some cases, it may not be possible to access
pictures saved to a network server using the
supplied software in the same way as on a
standalone computer.
• The user bears all applicable fees charged by the
phone company or Internet service provider when
using services that require an Internet connection.
60
Disconnecting the Camera
Follow the on-screen instructions to turn the camera
off and disconnect the USB cable.
Uninstalling the Supplied Software
Only uninstall the supplied software when it is no
longer required or before beginning reinstallation.
After quitting the software and disconnecting
the camera, drag the “FinePixViewer” folder from
“Applications” into the Trash and select Empty Trash
in the Finder menu (Macintosh), or open the control
panel and use “Programs and Features” (Windows 7/
Windows Vista) or “Add or Remove Programs”
(Windows XP) to uninstall MyFinePix Studio. Under
Windows, one or more confirmation dialogs may be
displayed; read the contents carefully before clicking
OK.
The Shooting Menu
The shooting menu is used to adjust settings for a wide range of shooting conditions.
Using the Shooting Menu
MENU/OK to display the
1 Press
shooting menu.
SHOOTING MENU
SHOOTING MODE
ISO
IMAGE SIZE
IMAGE QUALITY
FINEPIX COLOR
WHITE BALANCE
the selector right to display
3 Press
options for the highlighted item.
1/2
AUTO
SCENE RECOGNITION
SR
N
c
AUTO
COMPLETED
Note
The options displayed in the shooting menu vary
depending on the shooting mode.
Selects optimum
camera settings
for certain modes.
SET
CANCEL
the selector up or down to
4 Press
highlight the desired option.
the selector up or down to
2 Press
highlight the desired menu item.
MENU/OK to select the
5 Press
highlighted option.
Menus
61
The Shooting Menu
Shooting Menu Options
Menu item
A SHOOTING MODE
Choose a shooting mode according to the type of
subject (pg. 22).
n ISO
Adjust ISO sensitivity (pg. 63). Choose higher values
when the subject is poorly lit.
o IMAGE SIZE
Choose image size (pg. 63).
T IMAGE QUALITY
Choose image quality (pg. 64).
Shoot pictures in standard color, saturated color,
black-and-white, or sepia (pg. 64).
Adjust color for different light sources (pg. 65).
p FINEPIX COLOR
C WHITE BALANCE
E CONTINUOUS
F AF MODE
Shoot a series of pictures (pg. 65).
Turn Intelligent Face Detection and red-eye removal
on or off (pg. 27).
Choose how the camera selects a focus area (pg. 66).
d MOVIE QUALITY
Choose the frame size for movies (pg. 45).
3 FACE DETECTION
62
Description
Options
Default
G/k/P/A/B/C/V/K/L/
D/U/E/F/G/I/O/P/N/
R
G
AUTO/1600/800/
400/200/100
AUTO
y/r 3:2/g 16:9/0/n/
m 16:9/m/p
y
FINE/NORMAL
NORMAL
STD/M/N/f
STD
AUTO/p/q/s/t/u/r
AUTO
ON/OFF
OFF
ON/OFF
—
w/X
w
) 1280/!/9
!
The Shooting Menu
n ISO
Control the camera’s sensitivity to light with P.
Higher values can be used to reduce blur when
lighting is poor; note, however, that mottling
may appear in pictures taken at high sensitivities.
If AUTO is selected, the camera will adjust
sensitivity automatically in response to shooting
conditions.
Settings other than AUTO
are shown by an icon in the
monitor if you use P.
800
o IMAGE SIZE
Choose the size at which still pictures are
recorded. Large pictures can be printed at large
sizes with no drop in quality; small pictures
require less memory, allowing more pictures to
be recorded.
Option
y
r3 : 2
g16 : 9
0
n
m16 : 9
m
p
Prints at sizes up to
31 × 23 cm/12.2 × 9 in. (y) or 31 × 21 cm/
12.2 × 8.2 in. (r3 : 2). Choose y for highquality prints, r3 : 2 for an aspect ratio of
3:2, g 16:9 for an aspect ratio of 16:9.
22 × 16 cm (8.7 × 6 in.)
17 × 13 cm (7 × 5.1 in.)
14 × 10 cm (5.5 × 3.9 in.)
5 × 4 cm (1.9 × 1.5 in.). Suited to e-mail or the
web.
Note
Image size is not reset when the camera is turned off
or another shooting mode is selected.
Menus
The number of pictures that can be taken at
current settings (pg. 105) is displayed to the right
of the image quality icon in the monitor.
63
The Shooting Menu
Aspect Ratio
Pictures taken at an image size setting of r3 : 2
have an aspect ratio of 3 : 2, the same as a frame of
35-mm film. Pictures taken at an image size setting
of g16:9 or m16:9 have an aspect ratio of 16:9.
Pictures taken at other settings have an aspect ratio
of 4 : 3.
4:3
3:2
p FINEPIX COLOR
Enhance contrast and color saturation or take
pictures in black and white or sepia.
Option
Displayed in
Standard contrast and saturation.
v-STANDARD
Recommended in most situations.
Vivid contrast and color. Choose
for vivid shots of flowers or
Mv-CHROME enhanced greens and blues in
landscapes. Available only in k, P,
A, B, N, and R modes.
Nv-B&W Take pictures in black and white.
fv-SEPIA Take pictures in sepia.
Settings other than v-STANDARD are shown
by an icon in the monitor.
16 : 9
T IMAGE QUALITY
Choose how much image files are compressed.
Select FINE (low compression) for higher image
quality, NORMAL (high compression) to increase
the number of pictures that can be stored.
64
Notes
• FINEPIX COLOR is not reset when the camera is
turned off or another shooting mode is selected.
• Depending on the subject, the effects of
Mv-CHROME may not be visible in the monitor.
The Shooting Menu
C WHITE BALANCE
For natural colors, choose a setting that matches
the light source (for an explanation of “white
balance,” see the Glossary on page 104).
Option
AUTO
p
q
s
t
u
r
Displayed in
White balance adjusted automatically.
For subjects in direct sunlight.
For subjects in the shade.
Use under “daylight” fluorescent lights.
Use under “warm white” fluorescent lights.
Use under “cool white” fluorescent lights.
Use under incandescent lighting.
E CONTINUOUS (Continuous shooting)
While the shutter button is pressed, the camera
takes up to three pictures.
Notes
• Focus and exposure are determined by the first
frame in each series.
• The number of pictures that can be recorded
depends on the memory available. Additional time
may be required to record pictures when shooting
ends. The pictures are displayed
STOR NG
in the monitor while recording is
in progress.
If AUTO does not produce the desired results
(for example, when taking close-ups), choose the
option that matches the light source.
Menus
Note
Results vary with shooting conditions. Play pictures
back after shooting to check colors in the monitor.
65
The Shooting Menu
F AF MODE
SHOOTING MENU
2
In shooting mode P or A,
CONT
FACE
this option controls how
CENTER
AF M
TRACKING
MOVI
the camera focuses when
Intelligent Face Detection is
off (pg. 27). Regardless of the
option selected, the camera will focus on the
subject in the center of the monitor when macro
mode is on (pg. 34).
2
■ F AF MODE: w CENTER
The camera focuses on the
subject in the center of the
monitor. This option can be
used with focus lock.
66
■ F AF MODE: X TRACKING
Position the subject in the
center focus area and press
G to lock on to the subject.
Once the subject is locked,
the camera will track the
subject as it moves through
the frame. Press G again to
cancel tracking.
19
800
N
START TRACKING
1000
F4.0
19
800
N
CANCEL
1000
F4.0
Caution
Tracking is not possible in some situations.
The Playback Menu
The playback menu is used to manage the pictures in internal memory or on the memory card.
Using
g the Playback Menu
1
Press D to enter playback mode
(pg. 40).
MENU/OK to display the
2 Press
playback menu.
PLAYBACK MENU
SET
MENU/OK to select the
6 Press
highlighted option.
1 /3
IMAGE SEARCH
ERASE
EDIT FOR BLOG
MARK FOR UPLOAD TO
SLIDE SHOW
RED EYE REMOVAL
COMPLETED
the selector up or down to
3 Press
highlight the desired menu item.
the selector right to display
4 Press
options for the highlighted item.
Playback
y
Menu Options
The following options are available:
Option
Description
Search for images based on certain
V IMAGE SEARCH
criteria (pg. 68).
Delete all or selected pictures (pg. 43).
M ERASE
Edit images and reduce file size. Ideal
v EDIT FOR BLOG
for images that will be uploaded or
sent as e-mail attachments (pg. 69).
Adjust the color balance and
e MOVIE EDIT
brightness of movies (pg. 72).
Specify the destination for uploading
b MARK FOR UPLOAD TO
to YouTube™ and FACEBOOK (pg. 72).
View pictures in a slide show (pg. 74).
q SLIDE SHOW
Create copies with reduced red eye
a RED-EYE REMOVAL
(pg. 74).
Protect pictures from accidental
O PROTECT
deletion (pg. 75).
Menus
IMAGE SEARCH
BY DATE
BY FACE
BY SCENE
BY TYPE OF DATA
BY UPLOAD MARK
the selector up or down to
5 Press
highlight the desired option.
67
The Playback Menu
Option
R CROP
j RESIZE
N IMAGE ROTATE
P COPY
Q VOICE MEMO
P TRANSITION
c MOVIE TRIMMING
r
PRINT ORDER
(DPOF)
Description
Create cropped copies of pictures
(pg. 76).
Reduce the size of images (pg. 77).
Rotate pictures (pg. 78).
Copy pictures between internal
memory and a memory card (pg. 79).
Add voice memos to pictures (pg. 80).
Choose the transition between
pictures during playback (pg. 82).
Create an edited copy of a movie
(pg. 82).
Select pictures for printing on DPOFand PictBridge-compatible devices
(pg. 51).
V IMAGE SEARCH
You can search for images
based on a variety of criteria.
Begin by selecting V IMAGE
SEARCH in the playback
menu.
SET
1 /3
COMPLETED
MENU/OK and select the
1 Press
search criteria.
Criteria
BY DATE
BY FACE
BY SCENE
BY TYPE OF
DATA
BY UPLOAD
MARK
Description
Find all pictures taken on a specified
date.
Find pictures based on face information.
Find all pictures that match a specified
scene.
Find all still images, movies, or images
edited for use with a blog.
Find all images uploaded to either
YouTube or FACEBOOK.
2 Narrow down the criteria.
68
PLAYBACK MENU
IMAGE SEARCH
ERASE
EDIT FOR BLOG
MARK FOR UPLOAD TO
SLIDE SHOW
RED EYE REMOVAL
The Playback Menu
MENU/OK to begin searching.
3 Press
The results of the search are
displayed.
Searching for images
Images found when using the
image search feature can be
deleted (pg. 43), protected (pg.
75), or viewed in a slide show
(pg. 74) by pressing MENU/OK.
v EDIT FOR BLOG
You can process still images for posting to a blog.
1 Select the frame (file) to process.
COUPLE
ERASE
PROTECT
SLIDE SHOW
EXIT SEARCH
EXIT
MENU/OK to display the
2 Press
playback menu.
Select v EDIT FOR BLOG and
3 press
MENU/OK to display the
processing menu.
ED T FOR BLOG
SET
4 Select the menu.
CANCEL
Menus
CROP
ASPECT RATIO
BR GHTNESS
CONTRAST
COLOR
SEPIA
69
The Playback Menu
MENU/OK to open the setting
5 Press
screen. The screen type varies,
depending on the selected menu.
the setting.
6 Change
This step is unnecessary in some
menus.
MENU/OK to process the
7 Press
image.
The original image remains
unaltered.
70
Notes
• Press the W and T buttons to zoom the picture in or
out and use the selector to display the portion of the
picture you wish to save before processing it. Press
MENU/OK to crop the picture and return to the image
selection display.
• Processed images are saved at p (640×480).
• Small copies are saved using filenames that begin
with “BLOG.” During playback, small copies are
indicated by a v icon and a black border. Small
copies can not be further cropped or rotated.
The Playback Menu
■ List of Processing menu options
menu
CROP
Q ASPECT RATIO*
BRIGHTNESS
CONTRAST
COLOR
SEPIA
FACE MOSAIC
Functions
The image is trimmed so that only the desired area of the
image is viewable.
Settings
Factory default
—
—
Wide image: 4:1, 8:3,
Wide image:4:3
16:9, 3:2, 4:3, 1:1, 3:4, 1:3 Tall image:3:4
Tall image: 3:1, 4:3, 1:1,
3:4, 2:3, 9:16, 3:8, 1:4
Changes the brightness of an image.
-5 to +5
0
Changes the contrast of an image.
-5 to +5
0
Emphasizes red and blue hues of an image. + increases red -5 to +5
0
hues; - increases blue hues.
Converts an image to black and white, or sepia.
0 to 5
0
Applies a mosaic effect to faces in an image. If the image is
taken with Intelligent Face Detection set to ON, the effect
can be applied on up to 4 faces. If the image is taken with
—
—
Intelligent Face Detection set to OFF, the effect will be
applied at the center of the image.
Crops an image to change the aspect ratio.
* When a Q menu is used, other menus cannot be used for that image.
Menus
71
The Playback Menu
e MOVIE EDIT
You can process movies for posting to a blog,
using the same procedure used for processing
still images (pg. 69).
■ List of Processing menu options
Menu
SEPIA
B&W
BACKLIGHT
CORRECTION
Functions
Converts the movie to sepia.
Converts the image to black and white.
Brightens the image to compensate for
backlight.
Note
Processed files are saved using file names that begin
with “EDIT”. During playback, these files are indicated
by a e icon and a black border.
b MARK FOR UPLOAD TO
You can select still images and movies to be
uploaded later to YouTube or FACEBOOK. Begin
by selecting b MARK FOR UPLOAD TO in the
playback menu.
MENU/OK and select the
1 Press
upload destination.
the still image or movie that
2 Select
you will upload later, then press
MENU/OK.
Repeat this step if you want to
upload more items.
settings are complete, press
3 When
DISP/BACK.
Notes
• The upload destination (YouTube or FACEBOOK) is
displayed (pg. 3) when playing back images that
have been selected for upload.
• Still images cannot be uploaded to YouTube.
• You can also use the upload button (pg. 2) to set an
upload. Select the still image or movie that you will
upload, then press the upload button and select the
upload destination.
72
The Playback Menu
■ Canceling Upload Selections
You can cancel still images and movies that were
selected to be uploaded. Begin by selecting b
MARK FOR UPLOAD TO.
1 Press MENU/OK.
2
Display a still image or movie that
was selected to be uploaded.
■ Uploading Images
YouTube/FACEBOOK Uploader
Once you have selected images to be uploaded
to YouTube or FACEBOOK, you can upload them
using the included MyFinePix Studio software
(pg. 55).
Use camera to select
images
CANCEL MARK OK?
YES
CANCEL
Use computer to
upload images
* This feature is not available for Macintosh computers.
MENU/OK.
3 Press
Select RESET ALL to cancel all
Menus
still images and movies that were
selected to be uploaded.
73
The Playback Menu
q SLIDE SHOW
View pictures in an automated slide show. After
choosing the background music, choose the
type of show and press MENU/OK to start. Press
DISP/BACK at any time during the show to view
on-screen help. When a movie is displayed,
movie playback will begin automatically, and the
slide show will continue when the movie ends.
The show can be ended at any time by pressing
MENU/OK.
Option
NORMAL
FADE-IN
NORMAL B
FADE-IN B
MULTIPLE
SCRAP
BOOK VIEW
SELECT BGM
74
Displayed in
Press selector left or right to go back or
skip ahead one frame. Select FADE-IN
for fade transitions between frames.
As above, except that camera
automatically zooms in on faces
selected with Intelligent Face
detection.
Display several pictures at once.
As for MULTIPLE, except that the
pictures are chosen randomly.
Choose background music.
a RED EYE REMOVAL
This option is used with pictures taken using
Intelligent Face Detection to create copies that
have been processed to remove red eye.
the picture back in the monitor (pictures
1 Play
taken with Intelligent Face Detection are
indicated by a B icon) and select a RED
EYE REMOVAL in the playback menu (pg. 41).
REMOVAL OK?
YES
CANCEL
The Playback Menu
MENU/OK. The message shown
2 Press
below at left will be displayed while
the camera analyses the image; if
red-eye is detected, the message shown
below at right will be displayed while the
camera processes the image to create a copy
with reduced red-eye.
DETECT NG
O PROTECT
Protect pictures from accidental deletion. The
following options are available.
■ FRAME
Protect selected pictures.
the selector left or right to
1 Press
display the desired picture.
REMOVING
PROTECT OK?
UNPROTECT OK?
CANCEL
YES
CANCEL
Picture not protected
YES
CANCEL
Protected picture
MENU/OK to protect the
2 Press
picture. If the picture is already
protected, pressing MENU/OK
will remove protection from the
image.
Menus
Notes
• Red eye may not be removed if the camera is unable
to detect a face or the face is in profile. Results may
differ depending on the scene. Red eye can not
be removed from pictures that have already been
processed using red-eye removal or pictures created
with other devices.
• The amount of time needed to process the image
varies with the number of faces detected.
• Copies created with a RED EYE REMOVAL are
indicated by a l icon during playback.
steps 1–2 to protect
3 Repeat
additional images. Press DISP/BACK
to exit when the operation is
complete.
75
The Playback Menu
■ SET ALL
Press MENU/OK to protect all
pictures, or press DISP/BACK
to exit without changing
picture status.
■ RESET ALL
Press MENU/OK to remove
protection from all pictures,
or press DISP/BACK to exit
without changing picture
status.
SET ALL OK?
IT MAY TAKE A WHILE
YES
CANCEL
RESET ALL OK?
T MAY TAKE A WHILE
YES
CANCEL
R CROP
To create a cropped copy of a picture, play
the picture back and select R CROP in the
playback menu (pg. 67).
the zoom buttons to zoom in and out
1 Press
and use the selector to scroll the picture
until the desired portion is displayed (to exit
to single-frame playback without creating a
cropped copy, press DISP/BACK).
Zoom indicator
CROP
If the number of pictures
affected is very large, the
display at right will appear
in the monitor while the
CANCEL
operation is in progress.
Press DISP/BACK to exit before the operation is
complete.
Caution
Protected pictures will be deleted when the memory
card or internal memory is formatted (pg. 87).
76
YES
Navigation
window shows
portion of image
currently displayed
in monitor
CANCEL
Tip: Intelligent Face Detection
If the picture was shot with
Intelligent Face Detection (pg.
27), B will be displayed in the
monitor. Press the F button
to zoom in on the selected
face.
CROP
FACE CROPP NG
YES
CANCEL
The Playback Menu
MENU/OK. A confirmation
2 Press
dialog will be displayed.
Copy size is shown at the
top; if the size is p, OK
is displayed in yellow.
Larger crops produce larger
copies; all copies have an
aspect ratio of 4 : 3.
REC OK?
REC
CANCEL
MENU/OK to save the cropped
3 Press
copy to a separate file.
Note
Pictures taken with other cameras cannot be trimmed.
j RESIZE
You can create a small copy of
a picture. Begin by selecting
j RESIZE in the playback
menu.
PLAYBACK MENU
SET
2/3
PROTECT
CROP
RESIZE
IMAGE ROTATE
COPY
VOICE MEMO
the selector up or down to highlight
1 Press
t STANDARD or s SMALL.
MENU/OK to select the
2 Press
highlighted option.
MENU/OK to copy the picture
3 Press
at the selected size.
Menus
77
The Playback Menu
N IMAGE ROTATE
IMAGE ROTATE
By default, pictures taken in
tall orientation are displayed
in wide orientation. Use this
option to display pictures in
SET
CANCEL
the correct orientation in the
monitor. It has no effect on pictures displayed
on a computer or other device.
the selector down to
2 Press
rotate the picture 90 ° clockwise,
up to rotate the picture 90 °
counterclockwise.
Notes
• Protected pictures can not be rotated. Remove
protection before rotating pictures (pg. 75).
• The camera may not be able to rotate pictures
created with other devices.
the selector left or right to
1 Press
display the desired picture in the
monitor.
MENU/OK to confirm the
3 Press
operation (to exit without rotating
the picture, press DISP/BACK).
The next time the picture is played back, it will
automatically be rotated.
78
The Playback Menu
P COPY
Copy pictures between internal memory and a
memory card.
Press the selector up or down
to highlight d INTERNAL
MEMORY g x CARD (copy
pictures from internal memory to
the memory card) or x CARD g
d INTERNAL MEMORY (copy pictures from
a memory card to internal memory).
■ FRAME
Copy selected frames.
COPY OK?
100 0001
1
the selector right to display
2 Press
options for the highlighted item.
COPY
INTE FRAME
CAR ALL FRAMES
4 Press MENU/OK.
CANCEL
the selector left or right to
1 Press
display the desired picture.
2 Press MENU/OK to copy the picture.
steps 1–2 to copy
3 Repeat
additional images. Press DISP/BACK
to exit when the operation is
complete.
■ ALL FRAMES
Press MENU/OK to copy all
pictures, or press DISP/BACK to
exit without copying pictures.
COPY ALL OK?
100 0001
IT MAY TAKE
A WHILE
Menus
the selector up or down to
3 Press
highlight FRAME or ALL FRAMES.
YES
YES
CANCEL
Cautions
• Copying ends when the
destination is full.
• DPOF print information is not copied (pg. 51).
79
The Playback Menu
Q VOICE MEMO
To add a voice memo to a
still picture, select Q VOICE
MEMO after displaying the
picture in playback mode.
REC STANDBY
30s
MENU/OK to start recording.
1 Press
Hold the camera at a distance of
about 20 cm (8 in.) and face the
microphone.
START
CANCEL
Note
Voice memos can not be added to movies or
protected pictures. Remove protection from pictures
before recording voice memos (pg. 75).
Microphone
RECORDING
28s
Time remaining
Blinks red
REC
RE REC
MENU/OK again to end
2 Press
recording. Recording ends
automatically after 30 seconds.
FINISH
REC
RE REC
Notes
• If a voice memo already exists for the current picture, the options at right will be
displayed. Select RE-REC to replace the existing memo.
• Voice memos are recorded as PCM-format WAV files (pg. 104) with a maximum size of
about 480 KB.
80
PLAYBACK MENU
SET
PROT
CRO
PLAY
RESI
RE REC
MAG
COPY
VOIC
2/3
The Playback Menu
Playing Voice Memos
When a picture that has a voice memo recorded for it (as indicated by
the h icon displayed during playback) is selected, you can play the
voice memo by selecting PLAY, then pressing MENU/OK.
15s
STOP
PAUSE
Progress is shown
in the monitor.
Progress bar
Note
The camera may not play voice memos recorded with other devices.
Caution
Do not cover the speaker during playback.
Speaker
Menus
81
The Playback Menu
P TRANSITION
Choose the transition
between images during
playback.
PLAYBACK MENU
3/3
TRAN
W PE
MOVI
SLIDE IN
PRIN
FADE IN
OFF
the selector down to
3 Pressing
resume or pause playback, play
SET
c MOVIE TRIMMING
To create a shorter copy of
the movie currently displayed
in playback mode, select
c MOVIE TRIMMING from
the playback menu.
1
0m00s
PLAY
IN POINT
82
MOVIE EDIT
0m00s
CANCEL
the movie until the last frame you
wish to include in the new movie
is displayed.
MOVIE EDIT
PLAY
IN POINT
Pressing the selector down to
start or pause playback, play the
movie until the first frame you
wish to include in the new movie
is displayed.
MOVIE ED T
2 Press MENU/OK.
Indicator shows
the position
of the starting
frame.
3m30s
CANCEL
PAUSE
OUT POINT
Indicator shows
the position of
the final frame.
BACK
To return to step 1 and choose a new starting
point, press DISP/BACK.
MENU/OK to save the edited
4 Press
movie to a new file and return
to playback with the new movie
displayed.
The original image is left as it was.
The Setup Menu
Using the Setup Menu
the setup menu.
1 Display
1.1 Press MENU/OK to display the
menu for the current mode.
1.2 Highlight the left tab.
3 Adjust settings.
3.1 Press the selector right
to display options for the
highlighted item.
SET UP
1.3 Select 4.
SET
IMAGE DISP.
FRAME NO.
ILLUM NATION
OPERATION VOL.
SHUTTER VOLUME
SOUND
2 /4
1.5 SEC
CONT.
ON
COMPLETED
SET UP
IMAGE DISP.
FRAME NO.
ILLUM NATION
OPERATION VOL.
SHUTTER VOLUME
SOUND
SET
2 /4
3.2 Press the selector up or down
to highlight an option.
1.5 SEC
CONT.
ON
COMPLETED
2.1 Press the selector up or down
to choose an item.
3.4 Press DISP/BACK when finished
to return to the shooting
mode screen or playback
screen.
Menus
2 Choose an item.
3.3 Press MENU/OK to select the
highlighted option.
83
The Setup Menu
Setup Menu Options
Menu item
e DATE/TIME
p TIME DIFFERENCE
n
Description
Options
Set the camera clock (pg. 14).
—
k/j
Set the clock to local time (pg. 86).
Choose a language (pg. 14).
See page 107
When silent mode is on, the flash does not fire (except when
using A mode), operation sounds and the shutter sound are
not heard, the sound is muted when playing back movies or
ON / OFF
7 SILENT MODE
P1
voice memos, and the self-timer lamp and shooting indicator
do not light (pg. 36).
Reset all settings except Frame number, DATE/TIME, TIME
DIFFERENCE, BACKGROUND COLOR, and VIDEO SYSTEM to default
—
s RESET
values. A confirmation dialog will be displayed, press the
selector left or right to highlight OK and press MENU/OK.
Format internal memory or memory cards (pg. 87).
—
m FORMAT
Choose how long pictures are displayed after shooting (pg.
3 SEC / 1.5 SEC /
a IMAGE DISP.
87).
ZOOM (CONTINUOUS) / OFF
Choose how files are named (pg. 88).
CONT. / RENEW
b FRAME NO.
Turn the shooting indicator on or off (pg. 88).
ON / OFF
P2 k ILLUMINATION
Adjust the volume of camera controls.
d OPERATION VOL.
q/m/n/o
e SHUTTER VOLUME Adjust the volume of the shutter sound.
q/m/n/o
Choose shutter, start-up, and control sounds (pg. 89).
—
j SOUND
—
f PLAYBACK VOLUME Adjust the volume for movie and voice memo playback (pg. 89).
Control the brightness of the monitor (pg. 89).
–5 – +5
g LCD BRIGHTNESS
Turn display power saving mode on or off.
ON / OFF
h LCD MODE
P3
5 MIN / 2 MIN / OFF
o AUTO POWER OFF Choose the auto power off delay (pg. 89).
Reduces camera shake and moving-subject blur.
AUTO / OFF
Z DIGITAL IS
ON / OFF
a RED EYE REMOVAL Remove “red-eye” effects caused by the flash.
84
Default
—
k
ENGLISH
OFF
—
—
1.5 SEC
CONT.
ON
m
m
—
—
0
ON
2 MIN
OFF
ON
The Setup Menu
Menu item
c DIGITAL ZOOM
Description
Enable or disable digital zoom (pg. 90).
Choose whether to save unprocessed copies of pictures taken
R SAVE ORG IMAGE
using red-eye removal.
P4
q BACKGROUND COLOR Choose the design of the menu screen.
u GUIDANCE DISPLAY Choose whether to display tool tips.
Choose a video mode for connection to a TV (pg. 49).
r VIDEO SYSTEM
Options
ON / OFF
Default
OFF
ON / OFF
OFF
Color 1 / Color 2 / Color 3
ON / OFF
NTSC / PAL
Color 2
ON
—
Menus
85
The Setup Menu
p TIME DIFFERENCE
When travelling, use this option to switch the camera clock instantly from your home time zone to
the local time at your destination.
the difference between local time
1 Specify
and your home time zone.
1.1 Press the selector up or down
to highlight j LOCAL.
1.2 Press the selector right to
display the time difference.
TIME DIFFERENCE
12 / 31 / 2050 10:00 AM
12 / 31 / 2050 10:00 AM
00
SET
00
between local time and your
2 Switch
home time zone.
To set the camera clock to local time,
highlight j LOCAL and press MENU/OK.
To set the clock to the time in your home
time zone, select k HOME. If j LOCAL
is selected, j will be displayed in the
monitor for three seconds after the camera
enters shooting mode, and the date will be
displayed in yellow.
CANCEL
1.3 Press the selector left or right
to highlight +, –, hours, or
minutes; press up or down
to edit. The minimum
increment is 15 minutes.
86
1.4 Press MENU/OK when settings
are complete.
2 / 31 / 2050 10 : 00 AM
After changing time zones, check that the
date and time are correct.
The Setup Menu
m FORMAT
FORMAT
Format internal memory or a
FORMAT OK?
ERASE ALL DATA
memory card. If a memory
OK
card is inserted in the camera,
CANCEL
x will be displayed in the
SET
dialog shown at right and
this option will format the memory card. If no
memory card is inserted, d will be displayed
and this option will format internal memory.
Press the selector left to highlight OK and press
MENU/OK to begin formatting.
Cautions
• All data—including protected pictures—will be
deleted. Be sure important files have been copied to
a computer or other storage device.
• Do not open the battery cover during formatting.
a IMAGE DISP.
Choose how long pictures are displayed in the
monitor after shooting.
• 3 SEC: Pictures are displayed for about 3 s before
being recorded to the memory card.
• 1.5 SEC: Pictures are displayed for about 1.5 s
before being recorded to the memory card.
• ZOOM (CONTINUOUS): Pictures are displayed until
the MENU/OK button is pressed. Pictures taken
at image sizes larger than p can be zoomed
in to check fine details (see page 41). Note that
this option is disabled in continuous mode (pg.
65) and when A or N is selected for A
SHOOTING MODE.
• OFF: Pictures are not displayed automatically
after shooting.
Menus
Note
The colors displayed at settings of 3 SEC and 1.5 SEC
may differ from those in the final picture.
87
The Setup Menu
b FRAME NO.
Frame
New pictures are stored in image files named using a four-digit file
number
100 0001
number assigned by adding one to the last file number used. The file
File
number is displayed during playback as shown at right. FRAME NO.
number
controls whether file numbering is reset to 0001 when a new memory
12 / 31 / 2050 10 : 00 AM
card is inserted or the current memory card or internal memory is
Directory
1/250
F4.0
formatted.
number
• CONT.: Numbering continues from the last file number used or the first
available file number, whichever is higher. Choose this option to reduce the number of pictures
with duplicate file names.
• RENEW: Numbering is reset to 0001 after formatting or when a new memory card is inserted.
Notes
• If the frame number reaches 999-9999, the shutter release will be disabled (pg. 101).
• Selecting s RESET (pg. 84) does not reset frame numbering.
• Frame numbers for pictures taken with other cameras may differ.
k ILLUMINATION
If ON is selected, the shooting indicator will light when the camera is turned on.
88
The Setup Menu
j SOUND
Choose the sounds used for the shutter, at start
up, and for camera controls. Press the selector
up or down to highlight an option and press
left or right to select a sound. Press MENU/OK to
select.
f PLAYBACK VOLUME
Adjust the volume for movie
and voice memo playback
and slide show music. Press
the selector up or down to
adjust the volume, then press
MENU/OK.
PLAYBACK VOLUME
7
SET
CANCEL
g LCD BRIGHTNESS
LCD BRIGHTNESS
0
SET
CANCEL
o AUTO POWER OFF
Choose the length of time before the camera
turns off automatically when no operations
are performed. Shorter times increase battery
life; if OFF is selected, the camera must be
turned off manually. Note that regardless of
the option selected, the camera will not turn
off automatically when connected to a printer
(pg. 50) or computer (pg. 55), while recording
or viewing a movie or when a slide show is in
progress (pg. 74).
Tip: Turning the camera on again
To turn the camera on and shoot, open the lens cover
fully. To turn the camera on and view images, press
D (pg. 13).
Menus
Adjust the LCD brightness.
Press the selector up or down to
adjust the brightness, then press
MENU/OK.
h LCD MODE
If ON is selected, the monitor will automatically
dim after a few seconds on inactivity to conserve
power. Monitor brightness will return to normal
when the shutter button is pressed.
The monitor will not dim when viewing pictures
or movies.
89
The Setup Menu
c DIGITAL ZOOM
If ON is selected, pressing T at the maximum
optical zoom position will trigger digital zoom,
further magnifying the image. To cancel digital
zoom, zoom out to the minimum digital zoom
position and press W.
Zoom
indicator
Zoom indicator,
DIGITAL ZOOM off
Optical zoom
Zoom indicator,
DIGITAL ZOOM on
Optical zoom
Digital
zoom
Caution
Digital zoom produces lower quality images than
optical zoom.
90
Optional Accessories
The camera supports a wide range of accessories from FUJIFILM and other manufacturers.
■ Audio/Visual
■ Computer Related
DIGITAL CAMERA
FINEPIX Z70 series
USB
Audio/visual
output
Computer (available from
third-party suppliers)
TV (available from
third-party suppliers)
Connect the HD player and TV
using an HDMI cable (available
from third-party suppliers)
SD card slot or card reader
HD player
PictBridge-compatible
printer (available from
third-party suppliers)
USB
High-definition TV
(available from
third-party suppliers)
Technical Notes
SD/SDHC
memory card
■ Printing
Printer
(available from third-party suppliers)
91
Optional Accessories
Accessories from Fujifi
j lm
The following optional accessories were available from FUJIFILM. Check with your local Fujifilm
representative for information on the accessories available in your region.
• NP-45 rechargeable Li-ion battery: Additional NP-45 slimline batteries can be purchased
as required.
• AV-C1 A/V cable: Connects the camera and a TV.
• HDP-L1 HD Player: Connects to an HD television and allows you to view still images and
movies stored on the memory card. Also requires the purchase of an HDMI cable.
For the latest information on accessories available from FUJIFILM, visit http://www.fujifilm.com/
products/digital_cameras/index.html.
92
Troubleshooting
Power and Battery
Problem
The camera
does not turn
on.
Power
supply
The battery
runs down
quickly.
The camera
turns off
suddenly.
Possible cause
Solution
Page
Charge the battery or insert a fully-charged
The battery is exhausted.
4, 6
spare battery.
The battery is not in the correct orientation. Re-insert the battery in the correct orientation. 6
Warm the battery by placing it in a pocket
The battery is cold.
or other warm place and re-insert it in the
6
camera immediately before taking a picture.
There is dirt on the battery terminals.
Clean the terminals with a soft, dry cloth.
—
Use k mode if you want to conserve power
23
The camera is in G mode.
when shooting.
The battery has reached the end of its
The battery has been charged many times.
—
charging life. Purchase a new battery.
The battery is exhausted.
Charge the battery or insert a fully-charged
spare battery.
4, 6
Troubleshooting
93
Troubleshooting
Problem
Possib e cause
Possible
Charging does The battery is not correctly inserted.
not start.
The battery is not in the correct orientation.
Charging is slow. The temperature is low.
Battery
There is dirt on the battery terminals.
charger The charging
lamp lights, but
the battery does The battery has been charged many times.
not charge.
So ution
Solution
Page
Re-insert the battery in the charger.
4
Re-insert the battery in the correct orientation. 4
Charge the battery at room temperature.
5
Clean the terminals with a soft, dry cloth.
—
The battery has reached the end of its
charging life. Purchase a new battery. If
—
the battery still fails to charge, contact your
FUJIFILM dealer.
Menus and Displays
Problem
Menus and displays are
not in English.
Possible cause
English is not selected for the w
option in the setup menu.
Solution
Select ENGLISH.
Page
14
Shooting
Problem
Taking
pictures
Focus
94
No picture is
taken when
the shutter
button is
pressed.
Possible cause
Memory is full.
Memory is not formatted.
There is dirt on the memory card contacts.
The memory card is damaged.
The battery is exhausted.
The camera has turned off automatically.
The monitor
goes dark after The flash has fired.
shooting.
The subject is close to the camera.
The camera
The subject is far away from the camera.
does not focus.
The subject is not suited to autofocus.
Solution
Insert a new memory card or delete pictures.
Format the memory card or internal memory.
Clean the contacts with a soft, dry cloth.
Insert a new memory card.
Charge the battery or insert a fully-charged
spare battery.
Turn the camera on.
The monitor may darken while the flash
charges. Wait for the flash to charge.
Select macro mode.
Cancel macro mode.
Use focus lock.
Page
8, 43
87
9
8
4, 6
13, 89
35
34
30
Troubleshooting
Problem
Macro mode is
Close-ups
not available.
Face detection
not available.
Intelligent No face is
Face
detected.
Detection
Wrong subject
selected.
Flash
Some flash
modes are not
available.
The flash does
not fully light
The flash window is obstructed.
the subject.
Hold the camera correctly.
Page
22
22
27
17
—
27, 30
22
4, 6
65
36
35
22
Troubleshooting
The flash does
not fire.
Possible cause
Solution
The camera is in a shooting mode which
Choose a different shooting mode.
makes macro (close-up) mode unavailable.
The camera is in a shooting mode which
Choose a different shooting mode.
makes Intelligent Face Detection unavailable.
The subject’s face is obscured sunglasses, a
Remove the obstructions.
hat, long hair, or other objects.
Change the composition so that the
The subject’s face occupies only a small
subject’s face occupies a larger area of the
area of the frame.
frame.
The subject’s head is tilted or horizontal.
Ask the subject to hold their head straight.
The camera is tilted.
Hold the camera straight.
The subject’s face is poorly lit.
Shoot in bright light.
Recompose the picture or turn face
The selected subject is closer to the center
detection off and frame the picture using
of the frame than the main subject.
focus lock.
The camera is in a shooting mode in which
Choose a different shooting mode.
the flash does not fire.
Charge the battery or insert a fully-charged
The battery is exhausted.
spare battery.
The camera is in continuous mode.
Select OFF for E CONTINUOUS.
The camera is in silent mode.
Turn silent mode off.
The flash is off (W).
Choose a different flash mode.
The camera is in a shooting mode which
Choose a different shooting mode.
makes some flash modes unavailable.
The camera is in silent mode.
Turn silent mode off.
The subject is not in range of the flash.
Position the subject in range of the flash.
36
107
17
95
Troubleshooting
Problem
Possible cause
Can not take
The battery is low.
N mode
pictures.
Can not record
Movies
The camera is in N mode.
movies.
The lens is dirty.
The lens is blocked.
Pictures are
R is displayed during shooting and the
blurred.
focus frame is displayed in red.
0 is displayed during shooting.
Pictures are
The ambient temperature is high and the
Problem mottled.
subject is poorly lit.
images
Smear appears The sun or another bright object was in
in pictures.
the frame.
96
Solution
Charge the battery or insert a fully-charged
spare battery.
Choose a different shooting mode.
Clean the lens.
Keep objects away from the lens.
Check focus before shooting.
Use the flash or a tripod.
This is normal and does not indicate a
malfunction. Choose a lower sensitivity.
White or purple vertical lines may appear
when a very bright object is framed in the
display. This is normal and does not indicate
a malfunction. Smear is not recorded in
photographs but may appear in movies. If
possible, avoid shooting movies with bright
objects in or close to the frame.
Page
4, 6
22
110
17
19, 30,
100
35
63
104
Troubleshooting
Playback
Problem
Pictures are
grainy.
Pictures
Audio
Possible cause
Solution
The pictures were taken with a different
—
make or model of camera.
The pictures were taken in N modes, at
Playback zoom an image size of p, saved as v Blog
—
unavailable.
Images, or with a different make or model
of camera.
No sound in
Playback volume is too low.
Adjust playback volume.
voice memo
The microphone was obstructed.
Hold the camera correctly during recording.
and movie
The speaker is obstructed.
Hold the camera correctly during playback.
playback.
Some of the pictures selected for deletion Remove protection using the device with
are protected.
which it was originally applied.
The battery-chamber cover was opened
while the camera was on.
Turn the camera off before opening the
battery-chamber cover to replace the battery
or insert a memory card.
—
—
89
45, 80
48, 81
75
88
Troubleshooting
Selected
Deletion pictures are
not deleted.
File
numbering is
Frame no.
unexpectedly
reset.
Page
97
Troubleshooting
Connections
Problem
Nothing
displayed
on camera
monitor.
TV
No picture or
sound.
No color.
The computer
does not
recognize the
camera.
Pictures can
not be printed.
Only one copy
PictBridge
is printed.
The date is not
printed.
Computer
98
Possible cause
Solution
Page
Camera is connected to TV.
Nothing is displayed on the camera
monitor while the camera is connected
to a TV.
The camera is not properly connected.
The supplied A/V cable was connected
during movie playback.
Input on the television is set to “TV”.
The camera is not set to the correct video
standard.
The volume on the television is too low.
The camera is not set to the correct video
standard.
Connect the camera correctly.
Connect the camera once movie playback
has ended.
Set input to “VIDEO”.
Match the camera r VIDEO SYSTEM
setting to the TV.
Adjust the volume.
Match the camera r VIDEO SYSTEM
setting to the TV.
The camera is not properly connected.
Connect the camera correctly.
59
The camera is not properly connected.
The printer is off.
Connect the camera correctly.
Turn the printer on.
50
—
The printer is not PictBridge-compatible.
—
49
49
48, 49
—
48, 83
—
48, 83
—
Troubleshooting
Miscellaneous
Problem
Poss ble cause
Possible
Nothing happens when Temporary camera malfunction.
the shutter button is
The battery is exhausted.
pressed.
The camera does not
function as expected.
Temporary camera malfunction.
The camera accidentally The memory card has been inserted or
turns off.
pulled out.
No sound.
The camera is in silent mode.
I want to charge the
battery while overseas.
Check the label on the battery charger.
Solution
Page
Remove and reinsert the battery.
6
Charge the battery or insert a fully-charged
4, 6
spare battery.
Remove and reinsert the battery. If the
problem persists, contact your FUJIFILM
6
dealer.
Insert the memory card, close the battery9
chamber cover, and then turn on the camera.
Turn silent mode off.
36
The battery charger can be used with voltages
of 100–240 V. Consult your travel agent for
92
information on plug adapters.
Troubleshooting
99
Warning Messages and Displays
The following warnings are displayed in the monitor:
Warning
O (red)
N (blinks red)
0
Description
Solution
Low battery.
Charge the battery or insert a fully-charged spare
battery.
Battery exhausted.
Slow shutter speed. Picture may be blurred. Use the flash or mount the camera on a tripod.
• Use focus lock to focus on another subject at the
same distance, then recompose the picture (pg.
R
30).
(displayed in red with The camera can not focus.
• If the subject is poorly lit, try focusing at a distance
red focus frame)
of about 2 m (6 ft. 7 in.).
• Use macro mode to focus when taking close-ups.
Aperture or shutter
The subject is too bright or too dark. The
If the subject is dark, use the flash.
speed displayed in red picture will be over- or under-exposed.
PRESS THE SHUTTER BUTTON
To exit to shooting mode, press the shutter button.
TO GO BACK TO SHOOTING MODE
D button pressed while lens cover is open.
Close the lens cover to turn the camera off.
CLOSE THE LENS COVER
TO TURN OFF THE CAMERA
FOCUS ERROR
TURN OFF THE CAMERA
AND TURN ON AGAIN
NO CARD
CARD NOT INITIALIZED
100
Camera malfunction.
Turn the camera off and then on again, taking care
not to touch the lens. If the message persists, contact
a FUJIFILM dealer.
No memory card inserted when COPY is
Insert a memory card.
selected in the playback menu.
The memory card or internal memory is not Format the memory card or internal memory (pg.
formatted.
87).
Clean the contacts with a soft, dry cloth. If the
The memory card contacts require
message is repeated, format the memory card (pg.
cleaning.
87). If the message persists, replace the memory card.
Camera malfunction.
Contact a FUJIFILM dealer.
Warning Messages and Displays
Warning
CARD ERROR
d MEMORY FULL
x MEMORY FULL
INTERNAL MEMORY IS FULL
INSERT A NEW CARD
Description
The memory card is not formatted for use
in the camera.
Solution
Format the memory card (pg. 87).
Clean the contacts with a soft, dry cloth. If the
The memory card contacts require cleaning
message is repeated, format the memory card (pg.
or the memory card is damaged.
87). If the message persists, replace the memory card.
Camera malfunction.
Contact a FUJIFILM dealer.
The memory card or internal memory is full; Delete pictures or insert a memory card with more
pictures can not be recorded or copied.
free space.
Re-insert the memory card or turn the camera off
and then on again. If the message persists, contact a
FUJIFILM dealer.
Not enough memory remaining to record Delete pictures or insert a memory card with more
additional pictures.
free space.
The memory card or internal memory is not Format the memory card or internal memory (pg.
formatted.
87).
The memory card is locked.
Unlock the memory card (pg. 8).
The memory card is incorrectly formatted. Use the camera to format the memory card (pg. 87).
Format the memory card (pg. 87) and select RENEW
for the b FRAME NO. option in the setup menu.
The camera has run out of frame numbers
Take a picture to reset frame numbering to 100-0001,
(current frame number is 999-9999).
then return to the b FRAME NO. menu and select
CONT.
Memory card error or connection error.
WRITE ERROR
FRAME NO. FULL
Troubleshooting
PROTECTED CARD
BUSY
101
Warning Messages and Displays
Warning
READ ERROR
PROTECTED FRAME
h ERROR
d NO IMAGE
x NO IMAGE
p CAN NOT CROP
CAN NOT CROP
v CAN NOT CROP
DPOF FILE ERROR
CAN NOT SET DPOF
A CAN NOT SET DPOF
CAN NOT ROTATE
A CAN NOT ROTATE
A CAN NOT EXECUTE
e CAN NOT EXECUTE
CAN NOT EXECUTE
v CAN NOT EXECUTE
102
Description
The file is corrupt or was not created with
the camera.
The memory card contacts require
cleaning.
Camera malfunction.
An attempt was made to delete, rotate, or
add a voice memo to a protected picture.
Voice memo file is corrupt.
Camera malfunction.
The source device selected in the playback
COPY menu contains no pictures.
An attempt was made to crop a p picture.
The picture selected for cropping is damaged
or was not created with the camera.
An attempt was made to crop a blog image.
The DPOF print order on the current memory
card contains more than 999 images.
The picture can not be printed using DPOF.
Movies can not be printed using DPOF.
The picture can not be rotated.
Movies can not be rotated.
EDIT FOR BLOG and RED EYE REMOVAL
can not be used with movies, pictures
created with other devices, pictures that can
not be viewed, or pictures created using
EDIT FOR BLOG.
Solution
The file can not be played back.
Clean the contacts with a soft, dry cloth. If the
message is repeated, format the memory card (pg.
87). If the message persists, replace the memory
card.
Contact a FUJIFILM dealer.
Remove protection before deleting, rotating, or
adding voice memos to pictures.
The voice memo can not be played back.
Contact a FUJIFILM dealer.
Select a different source.
These pictures can not be cropped.
Copy the pictures to internal memory and create a
new print order.
—
—
—
—
—
Warning Messages and Displays
Warning
N CAN NOT EXECUTE
R CAN NOT EXECUTE
PRESS AND HOLD
THE DISP BUTTON TO
DEACTIVATE SILENT MODE
COMMUNICATION ERROR
Description
The shutter button was pressed in N mode
when the battery was low.
The successive movie file has been
overwritten or renamed by computer or
other make of camera.
An attempt was made to choose a flash
mode or adjust the volume with the
camera in silent mode.
A connection error occurred while pictures
were being printed or copied to a computer
or other device.
PRINTER ERROR
PRINTER ERROR
RESUME?
An attempt was made to print a movie, a
picture not created with the camera, or a
picture in a format not supported by the
printer.
Exit silent mode before choosing a flash mode or
adjusting the volume.
Confirm that the device is turned on. If the device
is connected via USB, check that the cable is
connected.
Check printer (see printer manual for details). To
resume printing, turn the printer off and then turn it
back on.
Check printer (see printer manual for details). If printing
does not resume automatically, press MENU/OK to
resume.
Movies and some pictures created with other devices
can not be printed. If the picture was created with
the camera, check the printer manual to confirm
that the printer supports the JFIF-JPEG or Exif-JPEG
format. If it does not, the pictures can not be printed.
Troubleshooting
CAN NOT BE PRINTED
Printer out of paper or ink, or other printer
error.
Solution
Charge the battery or insert a fully-charged spare
battery.
Clips can not be added to files that have been
overwritten or renamed by a computer or other
make of camera.
103
Glossary
Digital zoom: Unlike optical zoom, digital zoom does not increase the amount of visible detail. Instead, details
visible using optical zoom are simply enlarged, producing a slightly “grainy” image.
DPOF (Digital Print Order Format): A standard that allows pictures to be printed from “print orders”
stored in internal memory or on a memory card. The information in the order includes the pictures to
be printed and the number of copies of each picture.
EV (Exposure Value): The exposure value is determined by the sensitivity of the image sensor and the amount
of light that enters the camera while the image sensor is exposed. Each time the amount of light doubles, EV
increases by one; each time the amount of light is halved, EV decreases by one. The amount of light entering
the camera can be controlled by adjusting aperture and shutter speed.
Exif Print: A standard that allows information stored with pictures to be used for optimal color reproduction
during printing.
JPEG (Joint Photographic Experts Group): A compressed file format for color images. The higher the compression
rate, the greater the loss of information and more noticeable drop in quality when the picture is displayed.
Smear: A phenomenon specific to CCDs which causes white streaks to appear when very bright light sources,
such as the sun or reflected sunlight, appear in the frame.
WAV (Waveform Audio Format): A standard Windows audio file format. WAV files have the extension “*.WAV” and
may be compressed or uncompressed. The camera uses uncompressed WAV. WAV files can be played using
Windows Media Player or QuickTime 3.0 or later.
Appendix
104
White balance: The human brain automatically adapts to changes in the color of light, with the result that objects
that appear white under one light source still appear white when the color of the light source changes. Digital
cameras can mimic this adjustment by processing images according to the color of the light source. This
process is known as “white balance.”
Internal Memory/Memory Card Capacity
The following table shows the recording time or number of pictures available at different image qualities. All
figures are approximate; file size varies with the scene recorded, producing wide variations in the number of files
that can be stored. The number of exposures or length remaining may not diminish at an even rate.
Image Size
Internal memory
(approx. 13 MB)
1 GB
2 GB
4 GB
8 GB
16 GB
y
r 3:2
T Image Quality (still images)
n
m 16:9
g 16:9
0
m
p
1
1
2
3
7
11
12
43
160
310
650
1,270
2,560
180
360
750
1,480
2,990
220
430
880
1,730
3,520
320
620
1,310
2,550
5,120
590
1,170
2,430
4,750
9,570
890
1,720
3,540
6,920
13,850
960
1,830
3,770
7,510
15,080
3,250
6,020
12,410
24,210
48,650
d Movie Quality
s
) 1280 t
2 sec.
10 sec.
20 sec.
6 min.
10 min.
20 min.*
40 min.*
90 min.*
10 min.
20 min.
50 min.*
110 min.*
230 min.*
30 min.
50 min.
120 min.*
240 min.*
480 min.*
* A movie recording will stop automatically when a movie file becomes approx. 2GB or 15 min. If you want to continue
recording, press the shutter button again. The available recording time is displayed based on approx. 2GB.
Appendix
105
Specifications
System
Model
Effective pixels
CCD
Storage media
FinePix Z70 series digital camera
12.0 million
½.33 -in., square-pixel CCD with primary color filter
• Internal memory (approx. 13 MB)
• SD/SDHC memory cards (see page 8)
File system
Compliant with Design Rule for Camera File System (DCF), Exif 2.2, and Digital Print Order Format
(DPOF)
File format
• Still pictures: Exif 2.2 JPEG (compressed)
• Movies: Motion JPEG AVI
• Audio: Monaural WAV
Image size (pixels)
• r3:2: 3,984 × 2,656 • g16:9 : 4,000 × 2,248 • 0 : 2,816 × 2,112
• y: 4,000 × 3,000
• p : 640 × 480
• n : 2,048 × 1,536
• m16:9 : 1,920 × 1,080 • m : 1,600 × 1,200
Lens
Fujinon 5 × optical zoom lens, f/4.0 (wide angle) – 4.8 (telephoto)
Focal length
F=6.4 mm–32.0 mm (35-mm format equivalent: 36 mm–180 mm)
Digital zoom
Still images: approx. 6.3× (up to 31.5× when combined with optical zoom)
Aperture
[Wide angle] F4.0 to F6.7 (two steps) / [Telephoto] F4.8 to F8.0 (two steps)
Focus range (distance
Approx. 60 cm (2 ft.)–infinity (wide angle) / Approx. 1.0 m (3.2 ft.)–infinity (telephoto)
from front of lens)
Macro mode: approx. 9 cm–80 cm/3.5 in.–2 ft. 7 in. (wide angle); 1 m–3 m/3.2 ft.–9 ft. 11 in. (telephoto)
Sensitivity
Equivalent to ISO 100, 200, 400, 800, 1600; AUTO (Standard Output Sensitivity)
Metering
256-segment through-the-lens (TTL) metering using CCD image sensor
Exposure control
Programmed autoexposure
Exposure compensation –2 EV – +2 EV in increments of 1/3 EV (P and N modes)
Scene modes
G (SCENE RECOGNITION), k (AUTO), P (PROGRAM AE), A (NATURAL & K (Dual Shot Mode)),
B (NATURAL LIGHT), C (PORTRAIT), V (PORTRAIT ENHANCER), K (LANDSCAPE), L (SPORT),
D (NIGHT), U (NIGHT (TRIPOD)), E (SUNSET), F (SNOW), G (BEACH), I (PARTY), O (FLOWER),
P (TEXT), N (AUCTION MODE), R (SUCCESSIVE MOVIE)
Image Stabilization
Available
Intelligent Face Detection Available
106
Specifications
System
Shutter speed
Continuous
Focus
White balance
Self-timer
Flash
Flash modes
Monitor
Movies
Shooting options
Playback options
Other options
Input/output terminals
A/V OUT (audio/video output) NTSC or PAL with monaural sound
Digital input/output
USB 2.0 High Speed with MTP/PTP connection
Appendix
4 s–1/2,000 s; combined mechanical and electronic shutter
• TOP 3: Up to 1 fps; max. 3 frames
• Mode: Single AF
• Autofocus system: Contrast-detect TTL AF
• Focus-area selection: AF CENTER and TRACKING
Automatic scene detection; six manual preset modes for direct sunlight, shade, daylight fluorescent,
warm white fluorescent, cool white fluorescent, and incandescent lighting
Couple timer/Group timer/Approx. 2 sec./10 sec.
Auto flash; effective range when sensitivity is set to AUTO is approx. 70 cm–3.1 m/2 ft. 4 in.–10 ft. 1 in.
(wide angle), 70 cm–2.7 m/2 ft. 4 in.–8 ft. 9 in. (telephoto), or 30 cm–80 cm/1 ft.–2 ft. 7 in. (macro mode)
Auto, fill flash, off, slow sync (red-eye removal off ); auto with red-eye removal, fill flash with red-eye
removal, off, slow sync with red-eye removal (red-eye removal on)
2.7-in., 230k-dot color LCD monitor; frame coverage approx. 96%
Camera can record movies with monaural sound and a frame size of 1280 × 720, 640 × 480 or
320 × 240 at a frame rate of 30 fps
Scene recognition, Intelligent Face Detection with red-eye removal, high-speed shooting, best
framing, and frame number memory
Intelligent Face Detection, red-eye removal, micro thumbnail, edit for blog , movie edit, crop (still
pictures), resize, slide show, transition, multi-frame playback, image rotation, voice memo, and image
search
PictBridge, Exif Print, FinePix COLOR, language selection (Arabic, Simplified Chinese, Traditional
Chinese, Czech, Danish, Dutch, English, Finnish, French, German, Greek, Hungarian, Italian, Japanese,
Korean, Lithuanian, Norwegian, Persian, Polish, Portuguese, Russian, Slovak, Spanish, Swedish, Thai,
Turkish and Ukrainian), time difference, silent mode
107
Specifications
Power supply/other
Power sources
Battery life (NP-45A)
Camera dimensions
Camera weight
Shooting weight
Operating conditions
NP-45A rechargeable battery
Approx. 165 frames, based on CIPA standard. Based on included battery, measured when using SD
memory card. Note that the number of shots that can be taken cannot be guaranteed and will be
reduced in lower temperatures.
91.0 mm × 57.1 mm × 20.1 mm/3.5 in. × 2.2 in. × 0.7 in.,excluding projecting parts, measured at the
thinnest part
Approx. 128 g/4.5 oz., excluding battery, accessories, and memory cards
Approx. 145 g/5.1 oz., including battery and memory card
• Temperature: 0 °C – +40 °C/32 °F – +104 °F
• Humidity: 10%–85% (no condensation)
NP-45A rechargeable battery
Nominal voltage
DC 3.7 V
Nominal capacity
720 mAh
Dimensions (W × H × D)
31.0 mm × 39.6 mm × 6.0 mm/
1.2 in. × 1.6 in. × 0.2 in.
Weight
Approx. 15 g/1.0 oz.
BC-45B battery charger
Rated input
Input capacity
Rated output
Supported batteries
Charging time
Dimensions (W × H × D)
Weight
Operating temperature
100–240 V AC, 50/60 Hz
6 VA (100 V / 240 V)
4.2 V DC, 550 mA
NP-45 rechargeable battery
Approx. 110 +/– 20 % minutes
(measured at +25 °C (+77 °F))
91 mm × 46 mm × 23 mm/
3.6 in. × 1.8 in. × 0.9 in., excluding
projections
Approx. 65 g/2.2 oz., excluding battery
0 °C – +42 °C/+32 °F – +107 °F
* The weight and dimensions vary depending on the country
or region of sale.
108
Specifications
Notes on the Battery and Battery Charger
• The battery and charger may become warm to the touch during charging. This is normal and does not
indicate a malfunction. If possible, charge the battery in a well-ventilated location.
• The battery charger may vibrate when in use. This is normal and does not indicate a malfunction.
• If the charger causes radio interference, increase the distance between the charger and the radio receiver.
• Do not leave the charger in locations that are very dusty or exposed to strong vibration, extreme humidity, or
high temperatures (for example, in direct sunlight or next to a heater).
• The battery charger can be used with input voltages of 100–240 V AC and 50 or 60 Hz. The shape of the
plug varies with the country of sale; consult your travel agent to determine whether the charger can be used
abroad.
Color Television Systems
NTSC (National Television System Committee) is a color television telecasting specification adopted mainly in
the U.S.A., Canada, and Japan. PAL (Phase Alternation by Line) is a color television system adopted mainly in
European countries and China.
Appendix
Notices
• Specifications subject to change without notice. FUJIFILM shall not be held liable for damages resulting from
errors in this manual.
• Although the monitor is manufactured using advanced high-precision technology, small bright points and
anomalous colors (particularly in the vicinity of text) may appear. This is normal for this type of monitor and
does not indicate a malfunction; images recorded with the camera are unaffected.
• Digital cameras may malfunction when exposed to strong radio interference (e.g., electric fields, static
electricity, or line noise).
• Due to the type of lens used, some distortion may occur at the periphery of images. This is normal.
109
Caring for the Camera
To ensure continued enjoyment of the product, observe the following precautions.
Storage and Use
If the camera will not be used for an extended
period, remove the battery and memory card.
Do not store or use the camera in locations that
are:
• exposed to rain, steam, or smoke
• very humid or extremely dusty
• exposed to direct sunlight or very high
temperatures, such as in a closed vehicle on a
sunny day
• extremely cold
• subject to strong vibration
• exposed to strong magnetic fields, such as
near a broadcasting antenna, power line, radar
emitter, motor, transformer, or magnet
• in contact with volatile chemicals such as
pesticides
• next to rubber or vinyl products
■ Condensation
Sudden increases in temperature, such as occur
when entering a heated building on a cold day,
can cause condensation inside the camera. If
this occurs, turn the camera off and wait an hour
before turning it on again. If condensation forms
on the memory card, remove the card and wait
for the condensation to dissipate.
Cleaning
Use a blower to remove dust from the lens and
monitor, then gently wipe with a soft, dry cloth.
Any remaining stains can be removed by wiping
gently with a piece of FUJIFILM lens-cleaning
paper to which a small amount of lens-cleaning
fluid has been applied. Care should be taken to
avoid scratching the lens or monitor. The camera
body can be cleaned with a soft, dry cloth.
Do not use alcohol, thinner, or other volatile
chemicals.
Travelling
Keep the camera in your carry-on baggage.
Checked baggage may suffer violent shocks that
could damage the camera.
110
Notes and Cautions
IMPORTANT SAFETY INSTRUCTIONS
• Read Instructions: All the safety
and operating instructions should
be read before the appliance is
operated.
• Retain Instructions: The safety and
operating instructions should be
retained for future reference.
• Heed Warnings: All warnings on the
appliance and in the operating
instructions should be adhered to.
• Follow Instructions: All operating
and use instructions should be
followed.
Installation
Power Sources: This video product
should be operated only from the
type of power source indicated on
the marking label. If you are not sure
of the type of power supply to your
home, consult your appliance dealer
or local power company. For video
products intended to operate from
battery power, or other sources,
refer to the operating instructions.
your obsolete outlet. Do not defeat
the safety purpose of the polarized
plug.
Alternate Warnings: This video
product is equipped with a 3-wire
grounding-type plug, a plug having
a third (grounding) pin. This plug
will only fit into a grounding-type
power outlet. This is a safety feature.
If you are unable to insert the
plug into the outlet, contact your
electrician to replace your obsolete
outlet. Do not defeat the safety
purpose of the grounding-type
plug.
manufacturer’s instructions have
been adhered to.
This video product should never
be placed near or over a radiator or
heat register.
Attachments: Do not use
attachments not recommended by
the video product manufacturer as
they may cause hazards.
Water and Moisture: Do not use this
video product near water – for
example, near a bath tub, wash
bowl, kitchen sink, or laundry
tub, in a wet basement, or near a
swimming pool, and the like.
of the appliance should follow the
manufacturer’s instructions, and
should use a mounting accessory
recommended by the manufacturer.
An appliance and
cart combination
should be moved
with care. Quick
stops, excessive
force, and uneven
surfaces may
cause the appliance and cart
combination to overturn.
Appendix
Antennas
Outdoor Antenna Grounding: If an
Overloading: Do not overload wall
Power-Cord Protection: Power-Supply outside antenna or cable system is
outlets and extension cords as this
connected to the video product, be
cords should be routed so that
can result in a risk of fire or electric
sure the antenna or cable system
they are not likely to be walked
shock.
is grounded so as to provide some
on or pinched by items placed
protection against voltage surges and
upon or against them, paying
Ventilation: Slots and openings
built-up static charges. Section 810
particular attention to cords at
in the cabinet are provided for
plugs, convenience receptacles, and of the National Electrical Code, ANSI/
ventilation and to ensure reliable
NFPA No. 70, provides information
the point where they exit from the
operation of the video product
with respect to proper grounding of
appliance.
and to protect it from overheating,
Grounding or Polarization: This
the mast and supporting structure,
and these openings must not be
Accessories:
Do
not
place
this
video
video product is equipped with a
grounding of the lead-in wire to
blocked or covered.
product
on
an
unstable
cart,
stand,
polarized alternating-current line
an antennadischarge unit, size of
The openings should never be
tripod,
bracket,
or
table.
The
video
plug (a plug having one blade
grounding conductors, location of
blocked by placing the video
product
may
fall,
causing
serious
wider than the other). This plug will product on a bed, sofa, rug, or other
antenna-discharge unit, connection
injury to a child or adult, and
fit into the power outlet only one
to grounding electrodes, and
similar surface.
serious damage to the appliance.
way. This is a safety feature. If you
requirements for the grounding
This video product should not
Use only with a cart, stand, tripod,
are unable to insert the plug fully
electrode.
be placed in a built-in installation
bracket, or table recommended
into the outlet, try reversing the
such as a bookcase or rack unless
plug. If the plug should still fail to fit, proper ventilation is provided or the by the manufacturer, or sold with
the video product. Any mounting
contact your electrician to replace
111
Notes and Cautions
Power Lines: An outside antenna
system should not be located in the
vicinity of overhead power lines or
other electric light or power circuits,
or where it can fall into such power
lines or circuits. When installing an
outside antenna system, extreme
care should be taken to keep from
touching such power lines or
circuits as contact with them might
be fatal.
EXAMPLE OF ANTENNA GROUNDING AS
PER NATIONAL ELECTRICAL CODE
Ground
Clamp
Electric
Service
Equipment
Ground
Clamps
Power Service Grounding
Electrode System
(NEC ART 250. PART H)
Never spill liquid of any kind on the
video product.
Lightning: For added protection for
this video product receiver during
a lightning storm, or when it is left
unattended and unused for long
periods of time, unplug it from
the wall outlet and disconnect
the antenna or cable system. This
will prevent damage to the video
product due to lightning and
power-line surges.
Service
Antenna Lead
Servicing: Do not attempt to service
in Wire
this video product yourself as
opening or removing covers may
Antenna
expose you to dangerous voltage or
Discharge Unit other hazards. Refer all servicing to
(NEC SECTION
qualified service personnel.
810-20)
Grounding
Damage Requiring Service: Unplug this
Conductors
video product from the wall outlet
(NEC SECTION
and refer servicing to qualified
810-21)
service personnel under the
following conditions:
When the power-supply cord or
Use
Cleaning: Unplug this video product plug is damaged.
from the wall outlet before cleaning. If liquid has been spilled, or objects
Do not use liquid cleaners or aerosol have fallen into the video product.
If the video product has been
cleaners. Use a damp cloth for
exposed to rain or water.
cleaning.
If the video product has been
Object and Liquid Entry: Never push
dropped or the cabinet has been
objects of any kind into this video
damaged.
product through openings as they
If the video product does not
may touch dangerous voltage
operate normally be following the
points or shortout parts that could
operating instructions. Adjust only
result in a fire or electric shock.
112
those controls that are covered
by the operating instructions as
an improper adjustment of other
controls may result in damage and
will often require extensive work
by a qualified technician to restore
the video product to its normal
operation.
When the video product exhibits
a distinct change in performance
- this indicates a need for service.
Replacement Parts: When
replacement parts are required, be
sure the service technician has used
replacement parts specified by the
manufacturer or have the same
characteristics as the original part.
Unauthorized substitutions may
result in fire, electric shock or other
hazards.
Safety Check: Upon completion of
any service or repairs to this video
product, ask the service technician
to perform safety checks to
determine that the video product is
in proper operating condition.
Notes and Cautions
Be sure to read this notes before using
WARNING
Safety Notes
If a problem arises, turn the camera off, remove the battery, disconnect and unplug
the AC power adapter.
Continued use of the camera when it is emitting smoke, is emitting any
unusual odor, or is in any other abnormal state can cause a fire or electric
shock.
• Contact your FUJIFILM dealer.
• Make sure that you use your camera correctly. Read these Safety Notes
and your Owner’s Manual carefully before use.
• After reading these Safety Notes, store them in a safe place.
Unplug
from power
socket
About the Icons
• The icons shown below are used in this document to indicate the
severity of the injury or damage that can result if the information
indicated by the icon is ignored and the product is used incorrectly as a
result.
WARNING
CAUTION
This icon indicates that death or serious injury can result if the information
is ignored.
Do not allow water or foreign objects to enter the camera.
If water or foreign objects get inside the camera, turn the camera off, remove
the battery and disconnect and unplug the AC power adapter.
Continued use of the camera can cause a fire or electric shock.
• Contact your FUJIFILM dealer.
Do not use in
the bathroom
or shower
This icon indicates that personal injury or material damage can result if the
information is ignored.
Do not
disassemble
The icons shown below are used to indicate the nature of the information
which is to be observed.
Triangular icons tell you that this information requires attention (“important”).
Circular icons with a diagonal bar tell you that the action indicated is
prohibited (“Prohibited ).
Never attempt to change or take apart the camera. (Never open the casing.) Do not use
the camera when it has been dropped or the casing is damaged.
This can cause a fire or electric shock.
• Contact your FUJIFILM dealer.
Do not change, heat or unduly twist or pull the connection cord and do not place heavy
objects on the connection cord.
These actions could damage the cord and cause a fire or electric shock.
• If the cord is damaged, contact your FUJIFILM dealer.
Do not place the camera on an unstable surface.
This can cause the camera to fall or tip over and cause injury.
Never attempt to take pictures while in motion.
Do not use the camera while you are walking or driving a vehicle. This can
result in you falling down or being involved in a traffic accident.
Do not touch any metal parts of the camera during a thunderstorm.
This can cause an electric shock due to induced current from the lightning
discharge.
Appendix
Filled circles with an exclamation mark tell you an action that must be
performed (“Required”).
Do not use the camera in the bathroom or shower.
This can cause a fire or electric shock.
Do not use the battery except as specified.
Load the battery as aligned with the indicator.
113
Notes and Cautions
WARNING
Keep out of the reach of small children.
This product could cause injury in the hands of a child.
Use only the battery or AC power adapters specified for use with this camera. Do not
use voltages other than the power supply voltage shown.
The use of other power sources can cause a fire.
Do not move the camera while the AC power adapter is still connected. Do not pull on
the connection cord to disconnect the AC power adapter.
This can damage the power cord or cables and cause a fire or electric shock.
If the battery leaks and fluid gets in contact with your eyes, skin or clothing. Flush
the affected area with clean water and seek medical attention or call an emergency
number right away.
Do not use the AC power adapter when the plug is damaged or the plug socket
connection is loose.
This could cause a fire or electric shock.
Do not use the charger to charge batteries other than those specified here.
The Ni-MH battery charger is designed for Fujifilm HR-AA Ni-MH batteries.
Using the charger to charge conventional batteries or other types of
rechargeable batteries can cause the battery to leak fluid, overheat or burst.
Do not cover or wrap the camera or the AC power adapter in a cloth or blanket.
This can cause heat to build up and distort the casing or cause a fire.
When carrying the battery, install it in a digital camera or keep it in the hard case.
When storing the battery, keep it in the hard case. When discarding, cover the battery
terminals with insulation tape.
Contact with other metallic objects or battery could cause the battery to
ignite or burst.
Keep Memory Cards out of the reach of small children.
Because Memory Cards are small, they can be swallowed by children. Be sure
to store Memory Cards out of the reach of small children. If a child swallows a
Memory Card, seek medical attention or call an emergency number.
CAUTION
Do not use this camera in locations affected by oil fumes, steam, humidity or dust.
This can cause a fire or electric shock.
Do not leave this camera in places subject to extremely high temperatures.
Do not leave the camera in locations such as a sealed vehicle or in direct
sunlight. This can cause a fire.
114
CAUTION
Do not heat, change or take apart the battery. Do not drop or subject the battery to
impacts. Do not store the battery with metallic products. Do not use chargers other
than the specified model to charge the battery.
Any of these actions can cause the battery to burst or leak and cause fire or
injury as a result.
Do not place heavy objects on the camera.
This can cause the heavy object to tip over or fall and cause injury.
When you are cleaning the camera or you do not plan to use the camera for an extended
period, remove the battery and disconnect and unplug the AC power adapter.
Failure to do so can cause a fire or electric shock.
When charging ends, unplug the charger from the power socket.
Leaving the charger plugged into the power socket can cause a fire.
Using a flash too close to a person’s eyes may temporarily affect the eyesight.
Take particular care when photographing infants and young children.
When an xD-Picture Card is removed, the card could come out of the slot too quickly.
Use your finger to hold it and gently release the card.
Request regular internal testing and cleaning for your camera.
Build-up of dust in your camera can cause a fire or electric shock.
• Contact your FUJIFILM dealer to request internal cleaning every 2 years.
• Please note this is not a free of charge service.
Notes and Cautions
Power Supply and Battery
* Confirm your battery type before reading
the following descriptions.
The following explains proper use
of batteries and how to prolong
their life. Incorrect use of batteries
can cause shorter battery life, as
well as leakage, excessive heat, fire
or explosion.
take care not to place the battery
directly against the pad. The
camera may not operate if you
use a depleted battery in cold
conditions.
■ Notes on storage
• If a battery is stored for long
periods while charged, the
performance of the battery can
be impaired. If the battery will not
be used for some time, run the
battery out before storing it.
• If you do not intend to use the
camera for a long period of time,
remove the battery from the
camera.
• Store the battery in a cool place.
• The battery should be stored in
a dry location with an ambient
temperature between +15°C and
+25°C (+59°F and +77°F).
• Do not leave the battery in hot
or extremely cold places.
• Dispose of used battery promptly.
• Do not drop the battery or
otherwise subject it to strong
impacts.
• Do not expose the battery to
water.
• Always keep the battery terminals
clean.
• Do not store batteries in hot
places. Also, if you use the battery
for a long period, the camera body
and the battery itself will become
warm. This is normal. Use the AC
power adapter if you are taking
pictures or viewing images for a
long period of time.
2 Camera uses AA-size alkaline
or Ni-MH (nickelmetal hydride)
rechargeable batteries
* For details on the batteries that
you can use, refer to the OWNER’S
MANUAL of your camera.
■ Cautions for Using Battey
• Do not heat the batteries or throw
them into a fire.
• Do not carry or store batteries
■ Handling the Battery
with metal objects such as
Cautions for Your Safety:
necklaces or hairpins.
• Do not carry or store battery with • Do not expose the batteries to
metal objects such as necklaces or
water, and keep batteries from
hairpins.
getting wet or stored in moist
• Do not heat the battery or throw it
locations.
into a fire.
• Do not attempt to take apart or
• Do not attempt to take apart or
change the batteries, including
change the battery.
battery casings.
• Do not recharge the battery with
• Do not subject the batteries to
chargers other those specified.
strong impacts.
Appendix
■ Charging the Battery
• You can charge the battery using
the battery charger (included).
• The battery can be charged at
ambient temperatures between
1 Camera uses the Rechargeable
0°C and +40°C (+32°F and
Lithium-ion Battery
+104°F). Refer to the OWNER’S
* When shipped, the battery is not
MANUAL for the time of
fully charged. Always charge the
charging battery.
battery before using it.
• You should charge the battery
* When carrying the battery, install
at an ambient temperature
it in a digital camera or keep it in
between +10°C and +35°C
the soft case.
(+50°F and +95°F). If you charge
■ Battery Features
the battery at a temperature
• The battery gradually loses its
outside this range, charging
charge even when not used. Use
takes longer because the
a battery that has been charged
performance of the battery is
recently (in the last day or two) to
impaired.
take pictures.
• You cannot charge the battery
• To maximize the life of the battery,
at temperatures of 0°C (+32°F) or
turn the camera off as quickly as
below.
possible when it is not being used. • The Rechargeable Lithium-ion
• The number of available frames
Battery does not need to be fully
will be lower in cold locations or
discharged or exhausted flat
at low temperatures. Take along
before being charged.
a spare fully charged battery. You
• The battery may feel warm after it
can also increase the amount of
has been charged or immediately
power produced by putting the
after being used. This is perfectly
battery in your pocket or another
normal.
warm place to heat it and then
• Do not recharge a fully charged
loading it into the camera just
battery.
before you take a picture.
If you are using a heating pad,
■ Battery Life
At normal temperatures, the battery
can be used at least 300 times.
If the time for which the battery
provides power shortens markedly,
this indicates that the battery has
reached the end of its effective life
and should be replaced.
115
Notes and Cautions
If any liquid at all leaks from
• Do not use batteries that are
the batteries, wipe the battery
leaking, deformed, discolored.
compartment thoroughly and
• Do not store batteries in warm or
then load new batteries.
humid places.
• Keep the batteries out of reach of
If any battery fluid comes
babies and small children.
into contact with your hands
• Make sure that the battery polarity
or clothing, flush the area
(E and F) is correct.
thoroughly with water. Note
• Do not use new with used
that battery fluid can cause
batteries. Do not use charged and
loss of eyesight if it gets into
discharged batteries together.
your eyes. If this occurs, do
• Do not use different types or
not rub your eyes. Flush the
brands of batteries at the same
fluid out with clean water and
time.
contact your physician for
• If you do not intend to use the
treatment.
camera for a long period of time,
remove the batteries from the
■ Using the AA-size Ni-MH batteries
camera. Note if the camera is left
correctly
with the batteries removed, the
• Ni-MH batteries left unused in
time and date settings are cleared.
storage for long periods can
• The batteries feel warm right after
become “deactivated”. Also,
being used. Before removing the
repeatedly charging Ni-MH
batteries, turn the camera off
batteries that are only partially
and wait for the batteries to cool
discharged can cause them
down.
to suffer from the “memory
• Since batteries do not work well in
effect”. Ni-MH batteries that
cold weather or locations, warm
are “deactivated” or affected by
the batteries by placing them
“memory” suffer from the problem
inside your garments before use.
of only providing power for a
Batteries do not work well when
short time after being charged. To
cold. They will work again when
prevent this problem, discharge
the temperature returns to normal.
and recharge them several times
• Soil (such as fingerprints) on
using the camera’s “Discharging
the battery terminals makes the
rechargeable batteries” function.
batteries charge less reducing the
Deactivation and memory are
number of images. Carefully wipe
specific to Ni-MH batteries and are
the battery terminals with a soft
not in fact battery faults.
dry cloth before loading.
See OWNER’S MANUAL for the
116
procedure for “Discharging
rechargeable batteries”.
CAUTION
Do not use the “Discharging
rechargeable batteries” function
when alkaline batteries being used.
• To charge Ni-MH batteries,
use the quick battery charger
(sold separately). Refer to the
instructions supplied with the
charger to make sure that the
charger is used correctly.
• Do not use the battery charger to
charge other batteries.
• Note that the batteries feel warm
after being charged.
• Due to the way the camera is
constructed, a small amount of
current is used even when the
camera is turned off. Note in
particular that leaving Ni-MH
batteries in the camera for a long
period will overdischarge the
batteries and may render them
unusable even after recharging.
• Ni-MH batteries will self-discharge
even when not used, and the time
for which they can be used may
be shortened as a result.
• Ni-MH batteries will deteriorate
rapidly if overdischarged (e.g.
by discharging the batteries in a
flashlight). Use the “Discharging
rechargeable batteries” function
provided in the camera to
discharge the batteries.
• Ni-MH batteries have a limited
service life. If a battery can only be
used for a short time even after
repeated discharge-charge cycles,
it may have reached the end of its
service life.
■ Disposing of Batteries
• When disposing of batteries, do
so in accordance with your local
waste disposal regulations.
3 Notes on both models ( 1 , 2 )
■ AC Power Adapter
Always use the AC Power Adapter
with the camera. The use of an AC
Power adapter other than FUJIFILM
AC Power Adapter can be damaged
to your digital camera.
For details on the AC power adapter,
refer to the OWNER’S MANUAL of
your camera.
• Use the AC power adapter for
indoor use only.
• Plug the connection cord plug
securely into the DC input
terminal.
• Turn off the FUJIFILM Digital
camera before disconnecting the
cord from the DC input terminal.
To disconnect, pull out the plug
gently. Do not pull on the cord.
• Do not use the AC power adapter
with any device other than your
camera.
• During use, the AC power adapter
will become hot to the touch. This
is normal.
Notes and Cautions
• Do not take apart the AC power
adapter. Doing so could be
dangerous.
• Do not use the AC power adapter
in a hot and humid place.
• Do not subject the AC power
adapter to strong shocks.
• The AC power adapter may emit a
humming. This is normal.
• If used near a radio, the AC power
adapter may cause static. If this
happens, move the camera away
from the radio.
purely for personal use. Users are
also asked to note that the transfer
of Memory Card containing images
or data protected under copyright
laws is only permissible within
the restrictions imposed by those
copyright laws.
■ Explanation of Color Television
System
NTSC: National Television System
Committee, color television
telecasting specifications
adopted mainly in the U.S.A.,
Canada and Japan.
PAL: Phase Alternation by Line,
a color television system
adopted mainly by European
countries and China.
■ Exif Print (Exif ver. 2.2)
Exif Print Format is a newly revised
digital camera file format that
contains a variety of shooting
information for optimal printing.
Appendix
• IBM PC/AT is a registered
trademark of International
Business Machines Corp. of the
U.S.A.
• Macintosh, Quick-Time, and Mac
OS are trademarks of Apple Inc. in
the U.S.A. and other countries.
• Windows 7, Windows Vista and the
■ Handling Your Digital Camera
Windows logo are trademarks of
To ensure that images are recorded
the Microsoft group of companies.
correctly, do not subject the camera
• IrSimple™ Trademark is owned by
to impact or shock while an image is
the Infrared Data Association®.
being recorded.
• IrSS™ Trademark or IrSimpleShot™
■ Liquid Crystal
Trademark is owned by the
Before Using the Camera
If the LCD monitor is damaged,
Infrared Data Association®.
take
particular
care
with
the
liquid
•
SDHC logo is a trademark.
■ Test Shots Prior to Photography
crystal
in
the
monitor.
If
any
of
the
•
HDMI logo is a trademark.
For important photographs (such
following situations arise, take the
• YouTube is a trademark of Google
as weddings and overseas trips),
Inc.
always take a test shot and view the urgent action indicated.
• Other company or product names
image to make sure that the camera • If liquid crystal comes in contact
with your skin:
are trademarks or registered
is working normally.
Wipe the area with a cloth and
trademarks of the respective
• FUJIFILM Corporation cannot
then wash thoroughly with soap
companies.
accept liability for any incidental
and running water.
losses (such as the costs of
■ Notes on Electrical Interference
photography or the loss of income • If liquid crystal gets into your eye: If the camera is to be used in
Flush the affected eye with clean
from photography) incurred as a
hospitals or aircrafts, please
water for at least 15 minutes and
result of faults with this product.
note that this camera may cause
then seek medical assistance.
interference to other equipment in
■ Notes on Copyright
• If liquid crystal is swallowed:
the hospital or aircraft. For details,
Images recorded using your digital
Flush your mouth thoroughly with
please check with the applicable
camera system cannot be used in
water. Drink large quantities of
regulations.
ways that infringe copyright laws
water and induce vomiting. Then
without the consent of the owner,
seek medical assistance.
unless intended only for personal
■ Trademark Information
use. Note that some restrictions
•
and xD-Picture Card™
apply to the photographing of
are trademarks of FUJIFILM
stage performances, entertainments
Corporation.
and exhibits, even when intended
117
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN
http://www.fujifilm.com/