Operating instructions | Curtis LCD3213 Flat Panel Television User Manual

E
L
I
T
I_
®
Electric
ange
Estufa el6trica
Models, Modelos 790. 9802;',..
,,J,,,
.,. = Color number, nL_mero de color
iii:iiiii_i!_ii
_iiiilJiiiiii_
..........
ilii
.......
Sears Roebuck
WWW, SeaFs,COITI
and Co., Hoffman
Estates,
IL 60179 U.S.A.
P/N 318205200
Rev. B (0809)
Table of Contents
Wall Oven Warranty .......................................................
2
Product Record ..............................................................
2
Serial Plate Location ......................................................
2
IMPORTANT SAFETY INSTRUCTIONS ....................... 3-4
Range Features ..............................................................
5
Before Setting Surface Controls ................................ 6=7
Setting Surface Controls ..........................................
8-11
Surface Cooking ...........................................................
12
Before Setting the Oven Controls ............................... 13
Kenmore
Control Pad Features ...................................................
14
Setting the Clock .....................................................
15-16
Consumer Defined Control ..................................... 17-18
Setting Oven Controls ............................................
19=30
Self-Cleaning ...........................................................
31-33
Adjusting the Oven Temperature ................................ 33
General Care & Cleaning ........................................
34-37
Before You Call ........................................................
37-38
Protection Agreements ................................................
39
Sears Service ................................................................
40
Elite Limited Warranty
When installed, operated and maintained according to all instructions supplied with the product, if this appliance fails due to a
defect in material and workmanship within one year from the date of purchase, call 1-800-4-MY-HOME® to arrange for free repair.
For five years from the date of purchase, if the cooktop glass fails due to thermal shock or the cooktop elements are
defective, call 1-800-4-MY-HOME® to arrange for free part replacement. After the first year from purchase date, you must
pay the labor cost of part installation.
This warranty applies for only 90 days from the date of purchase if this appliance is ever used for other than private family purposes.
This
1.
2.
3.
4.
5.
6.
warranty covers only defects in material and workmanship.
Sears will NOT pay for:
Cracks in a ceramic glass cooktop that are not a result of thermal shock.
Stains and scratches on a ceramic glass cooktop resulting from accident or improper operation or maintenance.
Expendable items that can wear out from normal use, including but not limited to filters, belts, light bulbs, and bags.
A service technician to instruct the user in correct product installation, operation or maintenance.
A service technician to clean or maintain this product.
Damage to or failure of this product if it is not installed, operated or maintained according to the all instructions
supplied with the product.
7. Damage to or failure of this product resulting from accident, abuse, misuse or use for other than its intended purpose.
8. Damage to or failure of this product caused by the use of detergents, cleaners, chemicals or utensils other than those
recommended in all instructions supplied with the product.
9. Damage to or failure of parts or systems resulting from unauthorized modifications made to this product.
Disclaimer of implied warranties; limitation of remedies
Customer's sole and exclusive remedy under this limited warranty shall be product repair as provided herein. Implied
warranties, including warranties of merchantability or fitness for a particular purpose, are limited to one year or the
shortest period allowed by law. Sears shall not be liable for incidental or consequential damages. Some states and
provinces do not allow the exclusion or limitation of incidental or consequential damages, or limitation on the duration of
implied warranties of merchantability or fitness, so these exclusions or limitations may not apply to you.
This warranty applies only while this appliance is used in the United States or Canada.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears, Roebuck and Co., Hoffman Estates, IL 60179
Sears Canada Inc., Toronto, Ontario, Canada M5B 2B8
Product Record
Serial Plate Location
In this space below, record the date of purchase, model
and serial number of your product. You will find the model
and serial number printed on the serial plate.
You will find the model and serial number printed on the
serial plate. The serial plate is located as shown.
Model No. 790.
Serial No.
Date of purchase
Save these instructions and your sales receipt for future
reference.
Please carefully
read and save these instructions
This Use & Care Manual contains general operating instructions for your appliance and feature information for several
models. Your product may not have all the described features. The graphics shown are representative. The graphics on
your appliance may not look exactly like those shown. Common sense and caution must be practiced when installing,
operating and maintaining any appliance.
2
Printed in United States
important Safety instructions
Read all instructions
before using this appliance.
Save these instructions for future reference.
This manual contains
instructions given.
important
safety symbols
and instructions.
• Remove all tape and packaging before using the
appliance. Destroy the carton and plastic bags after
unpacking the appliance. Never allow children to play with
packaging material.
• Proper Installation.
Be sure your appliance is properly
installed and grounded by a qualified technician
in
accordance with National Electrical Code ANSI/NFPA
No.70 (USA) or CSA C22.1, PART 1 (Canada)-Iatest
edition
and local code requirements,
install only per installation
instructions provided in the literature package for this
appliance.
Electronic controllers
can be damaged by
cold temperatures.
When you use your appliance for the first
time, or if it has not been used for a long period of time,
make sure that it has been exposed to a temperature above
0°C/32°F for at least 3 hours before connecting
it to the
power supply.
•
In case of an emergency,
know how to disconnect
the
electrical power to the appliance at the circuit breaker or
fuse box.
• User Servicing. Do not repair or replace any part of the
appliance unless specifically recommended in the
manuals. All other servicing should be done only by a
qualified technician to reduce the risk of personal injury and
damage to the appliance. Sears Parts & Repair is the
recommended repair service for this appliance.
• Never modify or alter the construction
of an appliance by
removing panels, wire covers or any other part of the
product.
• Remove the oven door from any unused appliance if it is
to be stored or discarded.
Stepping, leaning, sitting or pulling down on
the door of this appliance can result in serious injuries and
may also cause damage to the appliance. Do not allow
children to climb or play around the appliance.
•
•
•
•
All wall ovens can tip.
Injury to persons could result.
Install anti4ip
bracket
packed
wall oven.
See Installation
Instructions.
with
To reduce the risk of tipping, the wall
oven must be secured by properly
installed anti-tip bracket provided
with the wall oven. Refer to the
Installation Instructions
for proper
anti=tip bracket installation.
Please pay attention
to these symbols
and follow all
Storage on Appliance. Flammable materials should not
be stored near surface units. This includes paper, plastic
and cloth items, such as cookbooks, plasticware and
towels, as well as flammable liquids. Do not store
explosives, such as aerosol cans, on or near the appliance.
Flammable materials may explode and result in fire or
property damage.
_Do
not use the ovens for storage.
_Do
not store items of interest to children
in
the cabinets above an appliance. Children climbing on the
appliance to reach items could be seriously injured.
• Do not leave children alone. Children should not be left
alone or unattended in the area where an appliance is in
use. They should never be allowed to sit or stand on any
:::
part of the appliance.
• DO NOT TOUCH SURFACE UNITS OR AREAS NEAR
THESE SURFACES. Surface units may be hot even though
they are dark in color. Areas near surface units may
become hot enough to cause burns. During and after use,
do not touch, or let clothing or other flammable materials
touch these areas until they have had sufficient time to cool.
Among these areas are the cooktop and areas facing the
cooktop.
• Wear Proper Apparel. Loose=fitting
or hanging
garments should never be worn while using the
appliance. Do not let clothing or other flammable materials
contact hot surfaces.
Never use your appliance
heating the room.
for warming
or
• Do Not Use Water or Flour on Grease Fires. Smother
the fire with a pan lid, or use baking soda, a dry
chemical or foam-type extinguisher.
• When heating fat or grease, watch it closely.
Fat or
grease may catch fire if allowed to become too hot.
• Use Only Dry Potholders.
Moist or damp potholders on
hot surfaces may result in burns from steam. Do not let
the potholders touch hot heating surface units. Do not use a
towel or other bulky cloth instead of a potholder.
• Do Not Heat Unopened Food Containers.
Buildup of
pressure may cause the container to burst and result in
injury.
IMPORTANT--Do
not attempt to operate the appliance
during a power failure, if power fails, always turn off the
appliance, if the appliance is not turned off and the power
resumes, it will begin to operate again. Once the power
resumes, reset the clock and oven function.
Important Safety Instructions
iMPORTANT iNSTRUCTiONS
YOUR COOKTOP
•
•
•
•
•
FOR USING
Know which knob controls each surface heating unit.
Place a pan of food on the unit before turning it on, and then
turn the unit off before removing the pan.
Use proper pan size. This appliance is equipped with one or
more surface units of different sizes. Select utensils having
flat bottoms large enough to cover the surface unit. The use of
undersized utensils will expose a portion of the surface
heating unit to direct contact and may result in ignition of
clothing. Proper relationship of utensil to the surface unit will
also improve efficiency.
Utensil handles should be turned inward and not extend
over adjacent surface units. To reduce the risk of burns,
ignition of flammable materials, and spillage due to unintentional contact with the utensil.
Never leave surface burners unattended at high heat
settings--Boilovers
cause smoking and greasy accumulations that may ignite, or a pan that has boiled dry may melt.
Glazed cooking utensils--Only
certain types of glass, glass/
ceramic, ceramic, earthenware, or other glazed utensils are
suitable for rangetop service without breaking due to the
sudden change in temperature. Check the manufacturer's
recommendations for cooktop use.
When flaming foods under a ventilating hood, turn the fan
On.
iMPORTANT iNSTRUCTiONS
YOUR OVEN
FOR USING
• Use Care When Opening an Oven Door--Stand to the side of
the appliance when opening the door of a hot oven. Let hot air
or steam escape before you remove or replace food in the oven.
• Keep Oven Vent Ducts Unobstructed. The wall oven is
vented at the upper control panel or at the center trim
depending of the model. Touching the surfaces in this area
when the wall oven is operating may cause severe burns. Also,
do not place plastic or heat-sensitive items near the oven vent.
These items could melt or ignite.
• Placement of Oven Racks. Always place oven racks in
desired location while oven is cool. Remove all utensils from
•
•
•
•
the rack before removing rack. If rack must be moved while
oven is hot, use extreme caution. Use pot holders and grasp
the rack with both hands to reposition. Do not let pot holders
contact the hot oven element or interior of the oven.
Do not use the broiler pan without its insert. The broiler pan
and grid allow dripping fat to drain and be kept away from the
high heat of the broiler.
Do not cover the broiler grid or oven bottom with
aluminum foil. Exposed fat and grease could ignite.
Do not touch a hot oven light bulb with a damp cloth.
Doing so could cause the bulb to break. Disconnect the
appliance or shut off the power to the appliance before
removing and replacing the bulb.
Protective liners--Do
not use aluminum foil to line the oven
bottom. Only use aluminum foil as recommended in this
manual. Improper installation of these liners may result in risk
of electric shock, or fire.
SELF-CLEANING
OVEN MODELS
• Clean in the self-cleaning
cycle only the parts of the
appliance listed in this Use & Care Guide. Before using the selfcleaning cycle of the appliance, remove the broiler pan and any
utensils stored in the appliance.
• Do not clean the oven door gasket. The door gasket is essential
for a good seal. Care should be taken not to rub, damage or move
the gasket.
• Do not use oven cleaners. No commercial oven cleaner or oven
liner protective coating of any kind should be used in or around
any part of the appliance
The health of some birds is extremely
sensitive to the fumes given off during the self-clean cycle
of any wall oven, Move birds to another well ventilated
room.
iMPORTANT iNSTRUCTiONS
YOUR OVEN
FOR CLEANING
Clean the appliance regularly to keep all parts free of
grease that could catch fire. Exhaust fan ventilation hoods
and grease filters should be kept clean. Do not allow grease
to accumulate. Greasy deposits in the fan could catch fire.
Refer to the hood manufacturer's instructions for cleaning.
• Cleaners/Aerosols--Always
follow the manufacturer's
recommended directions for use. Be aware that excess
residue from cleaners and aerosols may ignite causing
damage and/or injury.
• Clean Ventilating
Hoods Frequently--Grease
should not be
allowed to accumulate on the hood or filter. Follow
manufacturer's
instructions for cleaning.
FOR CERAMIC
GLASS
COOKTOPS
• Do not clean or operate a broken cooktop--lf
cooktop
should break, cleaning solutions and spillovers may penetrate
the broken cooktop and create a risk of electric shock. Contact
a qualified technician immediately.
• Clean cooktop glass with caution--If
a wet sponge or cloth
is used to wipe spills on a hot cooking area, be careful to avoid
a steam burn. Some cleaners can produce harmful fumes if
applied to a hot surface.
• Avoid scratching the cooktop glass with sharp objects.
IMPORTANT
SAFETY
NOTICE
The California
Safe Drinking Water and Toxic Enforcement
Act requires the Governor of California to publish a list of
substances
known to the state to cause cancer, birth
defects or other productive
harm, and requires businesses
to warn customers
of potential exposure to such
substances.
Range Features
Tur_,oBo
_Lo
A
F
A
H4
A
e_Out_,
v
_Lo
v
_L_
;TA_
000
Your electric
000
®
8
Warmer
R_ght
zone
_e_r
©@©
©©_
Right
Fro_t
VL)
©©©
range includes:
1. Electronic Oven Control with Timer
2. Glass Touch Sensitive Control Panel
3. Left Front Element Control & Display
4. Left Rear Element Control & Display
5. Warm & Ready Zone Control & Indicator Light
6. Right Rear Element Control & Display
7. Right Front Dual Element Control & Display
8. Oven Lockout Controls
9. Cooktop Lockout Controls
10. Large One Piece Handle
11. Self-Clean Upper Oven
12. Self-Clean Door Latch
13. Lower Oven Broil Element
14. Oven Interior Light
15. Self-Cleaning Convection Interior Oven
16. Convection Fan Cover
17. Adjustable Oven Rack
18. Large One Piece Handle
19. Full width Oven Door with Large Window
20. Leveling Legs and Anti-Tip Bracket (included)
21.6" Single Radiant Element
22. Warm & Ready Zone Element
23.6" Single Radiant Element
24.9" Turbo Boil Single Radiant Element
25.9"-12" Double Radiant Element
26. Ceramic Glass Smoothtop
NOTE: The features of your range may vary according to model
type & color,
@
Before Setting Surface Controls
About the Ceramic
Glass Cooktop
The ceramic cooktop has radiant surface elements located below the
surface of the glass. The design of the ceramic cooktop outlines the
area of the surface element underneath. Make sure the diameter of
the pan matches the diameter of the element outline on the cooktop
(See Figure 1).
Heat is transferred up through the surface of the cooktop to the
cookware. Only flat-bottom cookware should be used. The type and
size of cookware, the number of surface elements in use and their
settings, are all factors that will affect the amount of heat that will
spread to areas beyond the surface elements.
The areas surrounding the elements may become hot
enough to cause burns.
Figure 1
About the Radiant
Surface
Elements
The element temperature rises gradually and evenly. As the temperature rises, the element will glow red. To maintain
the selected setting, the element will cycle on and off. The heating element retains enough heat to provide a uniform
and consistent heat during the off cycle. For efficient cooking, turn off the element several minutes before
cooking is complete. This will allow residual heat to complete the cooking process.
Locations
of the Radiant
Surface
Elements
and Controls
Your range is equipped with radiant surface burners with different
wattage ratings. The ability to heat food quicker and in larger
volumes increases as the element wattage increases.
The radiant surface elements are located on the cooktop as follows:
- two 6 inch single radiant elements located at the right and left
rear positions;
- one 9 / 12 inch Double element located at the right front
positions;
- one 9" single Turbo boil radiant element located at the left front
position;
- a Warmer Zone located at the center rear position.
Note: Please read detailed instructions for ceramic glass
cooktop cleaning in the General Care & Cleaning section
and Before You Call checklist section of this Use and Care
Guide.
Note: Radiant elements have a limiter that allows the element to
cycle on and off, even at the HI setting. This helps to prevent
damage to the ceramic glass cooktop. Cycling at the Hi setting
is normal and can also occur if the cookware is too small for the
radiant element or if the cookware bottom is not flat (Refer to
page 12 for correct cookware instructions).
.........
.....
..............
................
.....
Figure 2
Note: (White glass cooktops only) Due to the high intensity of heat generated by the surface elements, the glass surface will
turn to a pale green when the element is first turned off. This phenomenon is normal and the glass will come back to its
original white color after it has completely cooled down.
Radiant surface elements may appear to have cooled after they have been turned off. The glass surface may
still be hot and burns may occur if the glass surface is touched before it has cooled sufficiently.
Do not place plastic items such as salt and pepper shakers, spoon holders or plastic wrappings on
top of the range when it is in use. These items could melt or ignite. Potholders, towels or wooden spoons could catch fire
if placed too close to the surface elements.
Before Setting Surface Controls
To Set the Cooktop
The clock (_
Lockout
Feature
(cont'd)
_COOKTOP
pad is used to activate the Cooktop Lockout feature which will lock all surface elements from being accidentally
turned ON. This feature will only lock the cooktop.
iNSTRUCTiONS
PRESS
DISPLAY
To turn the Cooktop Lockout Feature ON:
1. BE SURE ALL surface element controls are set to the OFF position.
2.
Press and hold _(_
until "CLO" (clock) appears (Figure 1). Continue
(_
Figure 1
holding until a second beep sounds (after 3 seconds). If a triple beep
sounds instead, check all surface elements and turn them to the OFF
position and repeat this step. I_1will appear in the display indicating the
cooktop controls and functions are locked out until the cooktop is
unlocked (See Figure 2).
To turn the Cooktop
1.
Press and hold (_
Lockout
Figure 2
Feature OFF:
until "CLO" appears (Figure 3). Continue holding
Figure 3
until a second beep sounds (after 3 seconds). I_1will disappear from
the display indicating the cooktop may be used normally (Figure 4).
Figure 4
Note: Starting a Self-Clean cycle will automatically turn ON the Cooktop
Lockout feature. The cooktop will remain locked until the Self-Clean cycle
has completed and the oven door has unlocked. If a power failure occurs
after the Cooktop Lockout has been activated, you must turn OFF the
Cooktop Lockout feature before being able to use the cooktop features
again.
How the Electronic
Surface
Element
Controls
work when
...........
ii.......
the Sabbath
feature
is ON.
When your Oven Sabbath feature is ON, the Electronic Surface Elements are also in Sabbath mode. This means that
all electronic surface element control displays show "Sb". The surface elements can be used even if the Sabbath
Feature is on.
To turn ON a Surface Element when the Oven Sabbath Feature is active:
With the Sabbath feature active, a surface element will not start heating until 15-30 seconds after you turn it on. The
heat setting you have turned to will not appear in the display because -Sb,, is showing there. Any adjustment to the
heat setting will also take 15 -30 seconds to go into effect.
To turn OFF the Surface Element when the Oven Sabbath Mode is active:
To shut off the surface element while the Sabbath feature is ON, press the ON/OFF button for that element. The
element will immediately turn off without delay.
Note: Refer to the Sabbath Feature section.
iiil
................
Setting Surface Controls
The Electronic
Surface
Element
Control
(ESEC)
The Electronic Surface Element Control (ESEC) feature provides a digital
display of the radiant surface elements on the cooktop. The ESEC display in
combination with the touch pads is designed to replace conventional control
knobs.
The available
ESEC Window
Display
The ESEC control will display heat levels ranging from Hi (Figure 1) to Lo
(Figure 6) and OFF (Figure 7). The settings between 9.0 (Figure 2) and 3.0
(Figure 3) decrease or increase in increments of .5 (1/2). The settings between
3.0 (Figures 3 & 4) and 1.2 (Figure 5) are Simmer settings which decrease or
increase in increments of .2 (1/5) to Lo (Figure 6; lowest Simmer setting) for
more precise settings at lower heat levels. Use the Recommended Surface
Setting Chart to determine the correct setting for the kind of food you are
preparing.
Hot Surface
Indicator
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Light
When using any of the radiant element positions the cooktop will become very
hot. The hot surface indicator light will turn ON when the element is hot enough
to cause burns, and will remain ON until the cooktop has cooled enough to be
safe to touch. Note: The hot surface message can turn ON when the upper
oven is in self-clean mode.
ESEC Lockout
Figure 1
Settings
Feature ( - - )
The ESEC feature will not operate during a Self-Clean cycle or when the
Cooktop Lockout feature is active. Whenever the Cooktop Lockout feature is
active, " - - " will appear in all display windows (See Figure 8).
Figure 7
Figure 8
ESEC PF message
The ESEC will display briefly the PF message (Figure g) whenever there has
been a power interruption to the appliance. The PF message will disappear by
itself after a few seconds.
Recommended
Surface
Cooking
Recommended
Settings
Settings
for Single,
& Double Surface
Elements
Setting
Type of Cooking
HIGH (8.0 - Hi)
Start most foods, bring water to a boil or pan broiling
MEDIUM HIGH (5.0 - 8.0)
Continue a rapid boil, fry, deep fat fry
MEDIUM (3.0 - 5.0)
Maintain a slow boil, thicken sauces and gravies, steam vegetables
MEDIUM LOW (2.0 =4.0)
Keep foods cooking, poach, stew (2.8 or lower is a simmer setting).
LOW/SIMMER (Lo - 2.0)
Keep warm, melt, simmer (2.8 or lower is a simmer setting).
Note: The size and type of cookware used will influence the setting needed for best cooking results. The
higher Simmer settings are used to simmer and keep larger quantities of foods warm such as stews and
soups. The lower Simmer settings are ideal for delicate foods and melting chocolate or butter.
Figure 9
Setting Surface Controls
Operating
Single
Radiant
(cont'd)
Surface
Elements
The cooktop has 3 SINGLE radiant surface elements: the RIGHT REAR position
LEFT FRONT position and the LEFT REAR position (Figure 1 ).
To Operate
1.
.
the Single Radiant
Surface
Elements:
Place correctly sized cookware on the radiant surface element.
Touch and hold the
pad for the desired element position until a beep
is heard. The display will show " -- "
Note: If no further pads are touched within 10 seconds the request to power
the element ON will clear.
.
Touch HI _
pad once to turn ON the power level to HI. Touch Lo
pad once for Lo (See Figure 3). The Hot Surface indicator light will turn ON
when the element becomes hot.
.
Each touch of the HI C_
or Lo _
Figure 1
Right Rear, Left Rear & Right Front
Elements
pad will decrease or increase the
power level from 9.0 through 3.0 by .5 increments. Simmer power levels
between 3.0 and 1.2 will decrease or increase by .2 increments. Lo is the
lowest power level available.
Note: The power level may be adjusted at any time while the element is ON.
5.
When cooking has been completed touch the
pad once to turn the
iiil
................
element OFF.
Each surface element provides a constant amount of heat at each setting. A
glowing red surface heating area extending beyond the bottom edge of the
cookware indicates the cookware is too small for the surface heating area.
Note: The Hot Surface message will remain displayed on the control panel as
long as the element is still hot and will remain ON until the heating surface area
has cooled sufficiently.
...........
ii.......
V
Radiant surface elements may appear to have cooled after they have
been turned off. The glass surface may still be hot and burns may occur if the
glass surface is touched before it has cooled sufficiently.
Do not place plastic items such as salt and pepper shakers,
spoon holders or plastic wrappings on top of the range when it is in use.
These items could melt or ignite. Potholders, towels or wooden spoons could
catch fire if placed too close to the surface elements.
Figure 2
Setting Surface Controls
Operating
the Dual Surface
(cont'd)
Element
The cooktop is equipped with a Dual radiant surface
element located at the right front cooktop position (Figure
1 ). Indicator lights on the control panel at that position are
used to indicate what portions of the Dual radiant element
will heat. The INNER light indicates that only the inner
element will heat (Figure 2). The OUTER light indicates
that both inner and outer elements will heat together
(Figure 3). You may switch between these different
settings at any time during cooking.
To Operate
1.
,
3.
the Dual Surface
@
OUTER
@÷
INNER
Figure 2
OUTER
INNER
Figure 1
Element:
Figure 3
Place correctly sized cookware on the radiant surface element.
Touch and hold the
pad for the Dual element position until a beep
is heard. The display will show " - - ". Note: If no further pads are touched
within 10 seconds the request to power the element ON will clear.
Select the INNER (Figure 2) or OUTER (both elements) (Figure 3) to heat
ELEM
E_""_T
by pressing the _
pad once or twice (Figures 3 & 4 show indicator
lights with OUTER selected). Note: If no element size is chosen when the
dual element is turned ON, the control will default to the inner coil only.
4.
Touch HI _-_
(_pad
5.
OUTER
pad once to turn ON the power level to HI. Touch Lo
f
,oCv)
once for Lo (See Figure 4).
Each touch of the HI _
or Lo _
INNER
y
pad will increase or decrease
power levels from g.5 through 3.0 by .5 increments. Simmer power levels
between 3.0 and 1.2 will decrease or increase by .2 increments. Lo is the
lowest power level available.
Note: The power level may be adjusted at any time while the element is
ON.
,
HI
When cooking has been completed touch the
Figure 4
pad once to turn the
entire element OFF.
Each dual surface element provides a constant amount of heat at each
setting. The different glow of the 2 elements is normal and doesn't affect heating performance (See Figure 3). A
glowing red surface heating area extending beyond the bottom edge of the cookware indicates the cookware is
too small for the surface heating area.
Note: If no element size is chosen when the dual element is turned ON, the control will default to the inner coil only.
See page 9 for recommended surface cooking settings.
Note: The Hot Surface message will remain displayed on the control panel as long as the element is still hot and will
remain ON until the heating surface area has cooled sufficiently.
Radiant surface elements may appear to have cooled after they have been turned off. But the glass surface
may still be hot and burns may occur if the glass surface is touched before it has cooled sufficiently.
Do not place aluminum foil or plastic items such as salt and pepper shakers, spoon holders or plastic
wrappings on top of the range when it is in use. These items could melt or ignite. Potholders, towels or wooden spoons
could catch fire if placed too close to the surface elements.
10
Setting Surface Controls
Operating
the Warmer
(Warm
(cont'd)
& Ready
TM)
Zone
The Warm & Ready TM zone radiant element is located at the center rear position
(Figure 1). The purpose of the Warmer Zone is to keep hot cooked foods at serving
temperature. Use the Warmer Zone to keep cooked foods hot such as: vegetables,
gravies, casseroles, soups, stews, breads, pastries and oven-safe dinner plates.
Always start with hot food. It is not recommended to heat cold food on the Warmer
Zone.
The Warmer Zone will not glow red when it is hot, but becomes hot enough
to cause burns. Always use potholders or oven mitts when removing food from the warmer zone as
cookware and plates will be hot.
All food placed on the warmer zone should be covered with a lid to maintain
quality. For best results, when warming pastries or breads, the cover should
Warmer Zone
have an opening to allow moisture to escape. Do not use plastic wrap or
Food Item
aluminum foil to cover food. Plastic or aluminum may melt onto the
Hot Beverages
surface.
Fried Foods
Use only plates, utensils and cookware recommended by the item
manufacturer for oven and cooktop use on the Warmer Zone.
Warmer
Zone Temperature
Selection
Refer to the Warmer Zone table for recommended heating levels. If a
particular food is not listed, start with the medium level, and adjust as
needed. Most foods can be kept at serving temperatures by using the
medium level.
To Set the Warmer
Zone Control:
Figure 1
Settings
Table
Heating Level
Hi
HI
Vegetables
Soups (Cream)
St ews
Sauces
Meats
Gravies
MED
MED
M ED
MED
MED
LO
Eggs
Dinner Plates with Food
Casseroles
Breads/Pastries
iiil
.................
LO
LO
LO
LO
...........
ii.......
The control and indicator lights are located on the control panel.
1. Touch the ON/OFF
pad at the Warmer Zone control position. The Warmer
Zone indicator light will flash. Note: If no further pads are touched within 25 seconds the
request to power the Warmer Zone ON will clear.
o
2. At the Warmer Zone controls position touch @
(see Figure 2) or @
once to turn ON the power level for Hi
to turn ON the power level for LO (see Figure 5). The Warmer Zone
Indicator light located above the ON/OFF pad will turn on steady.
3. Each touch @
or @
will increase or decrease the power levels. The Warmer
Zone has 5 power levels from Hi (see Figure 2) through MED (see Figure 4) to LO (see
Figure 5). The power level may be adjusted at any time while the Warmer Zone is ON.
4. When it is time to serve food, touch the ON/OFF
pad once to turn the Warmer Zone OFF.
The Warmer Zone indicator light will turn OFF (see Figure 3).
Radiant surface elements may appear to have cooled after they have been
turned off. The glass surface may still be hot and burns may occur if the glass surface is
touched before it has cooled sufficiently.
Do not place aluminum foil or plastic items such as salt and pepper
shakers, spoon holders or plastic wrappings on top of the range when it is in use.
These items could melt or ignite. Potholders, towels or wooden spoons could catch fire if
placed too close to the surface elements or burners.
11
HI
._> HI
91D
Cb
qlD MED
_-_ MED
91D
C>
o, LO
_-_ LO
Q
Q
ON/OFF
WARMER
ZONE
Figure 2
@
Q
ONiOFF
WARMER
ZONE
Figure 3
,_--_"
HI
cD HI
C->
¢b
qlD MED
¢ > MED
_ID
¢7
,o L0
,o L0
Figure 4
Figure 5
Surface Cooking
Selecting Surface Cooking Cookware
Cookware should have flat bottoms that make
good contact with the entire surface heating
element. Check for flatness by rotating a ruler
across the bottom of the cookware (See Figure
1 ). Be sure to follow the recommendations for
using cookware as shown in Figure 2.
h3corl_ect
W
o Curved and warped pan
bottoms.
• Flat bottom and straight
sides.
• Tight fitting lids.
o Weight of handle does not
tilt pan. Pan is well
balanced.
• Pan sizes match the
amount of food to be
prepared and the size of
the surface element.
• Made of a material that
conducts heat well.
® Easy to clean.
• Always match pot diameter
to element surface
diameter.
Note: The size
and type of
cookware used
will influence the
setting needed
for best cooking
results.
Figure 1
Cookware
Correct
÷1 I_
• Pan overhangs element by
more than one=half inch.
÷1 I_
• Pan is smaller than
element.
e Heavy handle tilts pan.
Figure 2
Material types
The cookware material determines how evenly and quickly heat is transferred from the surface element to the pan
bottom. The most popular materials available are:
ALUMINUM - Excellent heat conductor. Some types of food will cause it to darken (Anodized aluminum cookware
resists staining & pitting). If aluminum pans slide across the ceramic glass cooktop, they may leave metal marks which
will resemble scratches. Remove these marks immediately.
COPPER - Excellent heat conductor but discolors easily. May leave metal marks on ceramic glass (see Aluminum above).
STAINLESS
STEEL - Slow heat conductor with uneven cooking results. Is durable, easy to clean and resists staining.
CAST iRON - A poor heat conductor however will retain heat very well. Cooks evenly once cooking temperature
reached. Not recommended for use on ceramic cooktops.
is
PORCELAIN=ENAMEL or= METAL - Heating characteristics will vary depending on base material. Porcelain-enamel
coating must be smooth to avoid scratching ceramic cooktops.
GLASS - Slow heat conductor. Not recommended
for ceramic cooktop surfaces because it may scratch the glass.
Before Setting the Oven Controls
Air Circulation
in the Oven
If using 1 rack, place in center of oven. If using multiple racks, stagger
cookware as shown.
1 Oven Rack
For best air circulation and baking results allow 2-4" (5-10 cm) around
cookware for proper air circulation and be sure pans and cookware do
touch each other, the oven door, sides or back of the oven cavity. The
air must circulate around the pans and cookware in the oven for even
to reach around the food.
Multiple Oven Racks
12
the
not
hot
heat
Before Setting the Oven Controls
The lower oven is equipped with a blower which runs in baking and self=cleaning mode to
al components at a cool temperature. The blower may keep running even if the oven has
been turned off, until the components have cooled down.
Oven Vent Location
Upper Oven Vent
See illustration on left side for venting location of each oven. When the oven
is on, warm air is released through the vent. This venting is necessary for
proper air circulation in the oven and good baking results.
Removing
& Replacing
Lower Oven Racks
To remove an oven rack from the lower
oven, pull the rack forward until it stops. Lift
up front of rack and slide out.
To replace an oven rack in the lower
oven, fit the rack onto the guides on the
oven walls. Tilt the front of the rack upward
and slide the rack back into place.
ac_
The Offset Oven Rack is used to maximize cooking space. The offset rack
can be used in the lowest rack position to roast large cuts of meat and
poultry or for specific type of cooking as per the table below.
Installing
Oven
Rack Supports
in Upper Oven
To install oven rack
support, insert it into the
two brackets on the oven
...........
ii.......
wall interior and push down
as shown in the illustration
to the right.
To remove the oven rack
support for a self-clean
cycle, pull up the support to disengage it from the brackets.
Arranging
Oven
Racks
& Supports
ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN IS COOL (PRIOR TO
OPERATING THE OVEN).
RECOMMENDED
Rack
RACK POSITIONS FOR BAKING
Food
Rack Positions
Lower
Upper
Broiling meats, chicken or fish
positions
@
3* or 4*
1 or 2
Cookies & muffins
To bake on: 1 rack
2 racks
3 racks
2
2 &4
1,3** & 4
2
N/A
N/A
Cakes, pies & frozen pizzas
To bake on: 1 rack
2 racks
3 racks
2
2 &4
1,3** & 4
2
N/A
N/A
1 or 2
1 or 2
1"
N/A
Frozen pies, angel food cake,
yeast, bread, casseroles, small
cuts of meat or poultry
Rack
............
positions
Turkey, roast or ham
* Offset Rack can be used.
** Offset Rack must be used for best performance.
Note: Always use oven mitts when removing food.
13
Control Pad Features
READ THE iNSTRUCTiONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become
familiar with the various features and functions of the oven as described below. Detailed instructions for each feature
and function follow later in this Use & Care Guide.
NOTICE : The illustrations and instructions contained in this document only refer to the lower oven operations.
These instructions can also be applied to the upper oven by selecting the upper oven key pad instead of the
lower oven pad (except for the Convection Features),
LOWER OVEN
PAD-Used to
select the lower
SLOW COOK-Used
for a slow
cooking cycle.
CONVECTION
CONVERT-Used to
select the Convection
Convert feature
ADD 1 MINUTE PAD-- Used to add 1 minute to the
Timer Countdown.
This feature works with the
(available
Kitchen Timer only and does not affect any cook
time or start time functions.
with the lower oven only).
oven.
FLEX CLEAN
UPPER OVEN PAD-Used to select the
upper oven.
PAD--
Used
CAKES or BREADS PAD-Used to select the cakes or
breads from a variety of food
categories.
to select the Self-Cleaning
cycle and Consumer
Defined
Control Features.
OTHRU
9 NUMBER
PADS--
Used to enter temperature
times.
WARM &
HOLD
PAD-Used to set
the
& Hold
feature.
and
START -Used to start
all oven
features (not
used with
.Oven Light).
OVEN INTERIOR
LIGHT PAD-Used to turn oven
PIZZA
set the pizza
feature.
interior light ON
and OFF.
CONVECTION
BAKE--
the Convection
Bake feature
Used to
(available
BAKE PAD-Used to select
the bake
with the lower oven only)
OVEN COOK TiME PAD-- Used
enter the length of the baking time.
DELAY
START
function.
PAD --
start time for baking.
Maximum
Control Pad
Settings
CONVECTION
ROAST-Used to select
STOP PAD--
the variable
the convection
broil function,
mode (available with the
lower oven only).
entered except the time of
day and minute timer. Press
STOP to stop cooking. Also
the STOP pad is used to
any function
roasting
CLOCK SET PAD-Used to set the time
Used to set the desired
May be used with COOK
TIME to programa delayedtimed bakecycle,
Minimum and
BROIL PAD-Used to select
activate
of day. Also used to
KITCHEN
activate
cancel the minute timer.
the cooktop
lockout feature,
TIMER
ON/OFF
Used to clear
previously
oven lockout
setting.
PAD -- Used to set or
The minute timer does not
start or stop cooking.
All of the features listed below have minimum and maximum time or temperature settings that
may be entered into the control, An ENTRY acceptance beep will sound each time a control
pad is touched, An ENTRY ERROR tone (3 short beeps) will sound if the entry of the
temperature or time is below the minimum or above the maximum settings for the feature,
FEATURE
PREHEAT TEMP.
BAKE, CAKES, BREADS TEMP.
BROIL TEMP.
KITCHEN TIMER
12Hr.
24 Hr.
CLOCK TIME
12 Hr.
24 Hr.
OVEN COOKTIME
12 Hr.
24 Hr.
CLEAN TIME
CONVECTION BAKE
CONVECTION ROAST
PIZZA
MINIMUM TEMP./TIME
170 °F/77° C
170°F/77°C
400 °F/205°C
0:01 Min.
0:01 Min.
1:00 Hr./Min.
0:00 Hr./Min.
0:01 Min.
0:01 Min.
2 hours
170°F/77°C
170 °F/77° C
170°F/77°C
14
MAXIMUM TEMP./TIME
550°F/288°C
550°F/288°C
550 ° F/288°C
11:50 Hr./Min.
11:50 Hr./Min.
12:59 Hr./Min.
23:59 Hr./Min.
11:50 Hr./Min.
11:50Hr./Min.
4 hours
550 ° F/288°C
550 ° F/288°C
550°F/288°C
Setting the Clock
Setting
the Clock
The _
pad is used to set the clock. The clock may be set for 12 or 24 hour time of day
v
operation. The clock has been preset at the factory for the 12 hour operation. When the range
is first plugged in, or when the power supply to the range has been interrupted, the timer in
the display will flash.
Press _.
The display will stop flashing,
INSTRUCTIONS
To set the clock
1.
,
Press ("'_,
Press (_)
____ (_
1.
DISPLAY
below for 1:30)
"CLO" will appear in the display (Fig. 1).
Press _.
Changing
(example
PR ESS
(_
pads to set the time of day to 1:30 (Fig. 2).
Fig. 1
The time of day will appear in the display (Fig. 3).
between
Press and hold _
12 or 24 hour time of day display
Fig. 2
for 7 seconds until "12h" or "24h" appears
in the display.
2.
Press _
to switch between the 12 and 24 hour time of day
_
Fig. 3
display. The display will show either "12h" (Fig. 4) or "24h" (Fig.
3.
5).
_
f'-_
Press (,_TAR_to accept the change or press (STOP)
to reject the
v
4.
v
@
or
Fig. 4
change.
Reset the correct time as described in To set the Clock above.
Please note that if the 24 hour time of day mode was chosen, the
clock will now display time from 0:00 through 23:59 hours.
Fig. 5
15
Setting the Clock
Setting
Continuous
Bake or 12 Hour Energy Saving
The KITCHEN TIMER _
and FLEX CLEAN @
pads control the Continuous Bake or 12 Hour Energy Saving
features. The oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the
oven control is left on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for
Continuous Baking.
INSTRUCTIONS
for Continuous
To set the control
Energy
1.
Saving
PRESS
DISPLAY
Bake or 12 Hour
features
Press and hold _
for 7 seconds (Fig. 1). After 10 seconds
Fig. 1
v
"12h" or "--h" will appear in the display and the control will
beep once (Fig 2 or 3).
2.
Press @
to switch between the 12 Hour Energy Saving and
continuous bake features. Note: "12h" (Fig. 2) in the display
indicates the control is set for the 12 Hour Energy Saving
mode and "==h" indicates the control is set for the Continuous
Bake feature (Fig. 3).
3.
Press _
time
of
for 10 seconds
Fig. 2
Fig. 3
to accept the change (Fig. 4; display will return to
day) or
or
_OP') to reject the change.
press
Fig. 4
Setting
Kitchen
Timer
The KITCHEN TIMER ____,_pad controls the Kitchen Timer feature. The Kitchen Timer serves as an extra timer in the
kitchen that will beep when the set time has run out. It does not start or stop cooking. The Kitchen Timer feature can be
used during any of the other oven control functions, except during a self-clean operation. Refer to "Minumum and
Maximum Control Pad Settings" for time amount settings.
INSTRUCTIONS
To set the Kitchen Timer (example:
PRESS
5 minutes)
1.
Press
2.
Press the number pads to set the desired time in the display
(Fig. 5).
(example (_)).
Press _.
The time will begin to count
down in the display (Fig. 6). Note: If (_A_
3.
seconds until _
run
is not pressed the
timer will return to the time of day after 25 seconds.
When the set time has run out, "End" and "TIMER" will show in
the display (Fig. 7). The clock will sound with 3 beeps every 7
To cancel
DISPLAY
@
is pressed.
the Kitchen
Timer before
Fig. 6
the set time
has
Fig. 7
out
Press _.
The display will return to the time of day.
To Set Add 1 Minute
The @
Feature
ADD 1 MINUTE pad is used to set the Add 1 Minute feature. When the @
pad is pressed, 1 minute is
added to the Minute Timer feature if this feature is already active. If the Minute Timer feature is not active and the
pad is pressed, the Minute Timer feature will become active and will begin counting down from 1 minute.
16
Consumer Defined Control
Note: The Consumer Defined Control features are adjustments to the control that will not affect cooking results• These
include the Oven Lockout, Temperature Display and Silent Control Operation features.
Setting
Oven
Lockout
Feature
The _o_) pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and prevents
v
the oven from being turned on. It does not disable the clock, Kitchen Timer or the interior oven lights. The ovens can be locked
individually•
To activate
1
INSTRUCTIONS
the Oven Lockout feature
PRESS
Press rLow';;_
•
Ov_0._ _
c©
•
2•
Press and hold _
3.
After 3 seconds a beep will sound, "DOOR", "LOCKED" will
flash and "Lot" and "LOWER" will appear in the display (Fig.
1). Once the oven door is locked the "DOOR" and "LOCKED"
indicator will stop flashing and remain in the display. Allow 15
seconds for the oven door to lock.
for 3 seconds.
_for
v
To reactivate
normal
1.
Press (_.
2.
Press and hold _)
for 3 seconds• A beep will sound•
"LOWER" and "LOC" will disappear from the display. "DOOR"
and "LOCKED" will flash in the display until the oven door has
completely unlocked.
3. The appliance is again fully operational.
Note: Because you can set the oven lockout individually, the lower
oven can be used when the upper oven lockout feature is on.
Silent
Control
3 seconds
for
3 seconds
iiil
................
...........
ii.......
Operation
and FLEX CLEAN _
pads control the Silent Control operation feature. The Silent Control
v
The DELAY START _
Fig. 1
oven operation:
W
Setting
DISPLAY
operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the
control can be programmed for silent operation and later returned to operating with all the normal sounds and beeps.
INSTRUCTIONS
To change control from
silent control operation
Press and hold _
sound operation
DISPLAY
to
for 6 seconds (Fig. 2). After 6 seconds,
a
Fig. 2
v
1.
normal
PRESS
beep will sound and "SP" (Speaker) will appear in the display
(Fig. 3).
2.
Press _
to switch between normal sound operation and
silent operation mode.
If "SP" appears (Fig. 3), the control will operate with normal
sounds and beeps. If "==" appears (Fig. 4), the control is in the
silent operation mode.
3.
Press _ARTj._to accept the change or press _o_) to reject the
change•
Note: The control will always beep at the end of a kitchen timer
setting and will beep when a set temperature has been reached,
even if the control is set to silent operation.
17
for 7 seconds
Fig. 3
Fig. 4
Consumer Defined Control Features
Setting Temperature
and FLEX CLEAN _
or Celsius
pads control the Fahrenheit or Celsius temperature display modes. The oven
v
The BROIL _
Display m Fahrenheit
control can be programmed to display temperatures in Fahrenheit or Celsius, The oven has been preset at the factory to
display in Fahrenheit. Note: Both ovens will be changed at the same time,
iNSTRUCTiONS
To change display from
Celsius to Fahrenheit
1.
Press _
Fahrenheit
PRESS
to Celsius
DISPLAY
or
and hold for 7 seconds. A beep will sound, "550"
v
will appear, "LOWER" and "BROIL" will flash in the display
(Fig. 1). After 6 seconds a beep will be heard and "F" (Fig. 2)
or "C" (Fig. 3) will appear in the display.
O
Fig. 1
for 7seconds
Fig. 2
If "F" appears, the display is set to show temperatures in
Fahrenheit (Fig. 2). If "C" appears, the display is set to show
temperatures in Celsius (Fig. 3).
2.
Press @
to switch between Fahrenheit or Celsius display
Fig. 3
modes. The display will show either "F" (Fig. 2) or "C"
(Fig. 3).
3.
Press _'TART_
to accept the change or press _T%_to reject the
v
v
change.
Setting
Oven Controls
important
Things
to Know
Before
Setting
any Basic
Oven Cooking
Function
This appliance has been factory pre-set to start any BAKE, CONV BAKE, CONV ROAST, CAKE or BREAD function with
the oven set temperature automatically set for 350°E However if desired, the oven set temperature may be adjusted at any
time during the cooking process. You may also choose to add a COOKTIME or DELAY START with any of the functions
listed above.
Temperature
Visual
Display
Your oven is equipped with a temperature visual display. When a cooking mode is set, the actual temperature will be
shown in the display and will rise as the unit preheats. When the unit has reached its target temperature, a beep will sound
to remind you to place the food in the oven. This feature will be active with some cooking modes; bake, convection bake,
convection roast, cakes and breads.
NOTE: The lowest temperature that can be displayed is IO0°F.
18
Setting Oven Controls
Setting
Bake
The BAKE _
pad controls normal baking.
The oven can be programmed to bake at any temperature from 170 ° F to 550 ° F (77 ° C to 288 ° C).
INSTRUCTIONS
To set the Bake Temperature
PR ESS
DISPLAY
to 350°F
1.
Arrange interior oven racks and place food in oven.
2.
Press r_
Ov_Oz_j
•
3.
Press _,
Fig. 1
"350" will automatically appear in the display (Fig.
1).
4.
Press ___A_ (Fig. 2). The actual oven temperature
Fig. 2
will be
displayed. A beep will sound once the oven temperature
reaches 350 ° F.
Pressing {_'_ will cancel the Bake feature at any time.
To change the Bake Temperature
changing
from 350 ° to 425°F)
1.
Fig. 3
(example:
After the oven has already been set to bake at 350°F and the
oven temperature
needs to be changed to 425°F, press (_
G
(Fig. 2).
...........
ii.......
2. Press
(_ (_ (_. "425
°"willappear
inthedisplay
(Fig.31.
3.
Press ____ARTj_.
A beep will sound once the oven temperature
reaches "425 °''.
Pressing !_
\,_j
iiil
................
will cancel the Bake feature at any time.
Note: If the oven was recently heated from prior cooking and has
remained heated, the bake element symbol may not show in the
display immediately.
Note: During the first rise of temperature, the convection fan (lower
oven only) will be activated to allow the oven to reach its target
temperature faster. The bake, broil and convection elements will cycle
to allow a better heat distribution.
19
bO(]b
Setting Oven Controls
Oven
Baking
For best cooking results, heat the oven before baking cookies, breads, cakes, pies or pastries, etc. There Js no need to
preheat the oven for roasting meat or baking casseroles.
The cooking times and temperatures needed to bake a product may vary slightly from your previously owned appliance.
If you feel your oven is too hot or too cold, you can adjust its temperature.
Refer to the "Adjusting Oven Temperature"
section.
Baking Problems and Solutions
Baking
Problems
Cookies and biscuits burn on the
bottom.
Causes
Chart
Corrections
Cookies and biscuits put into
the oven before the preheating time is completed.
Oven rack overcrowded.
•
Allow oven to preheat to the selected temperature
before
placing food in oven.
•
•
Dark pan absorbs heat too
fast.
•
Choose pan sizes that will permit 5.1 cm to 10.2 cm
(2" to 4") of air space on all sides when placed in
the oven.
Use a medium-weight aluminum baking sheet.
•
•
Allow oven to preheat to the selected temperature
before placing food in the oven.
•
•
Cakes put into the oven before preheating time is completed.
Rack position too high or low.
Oven too hot.
•
•
Use proper rack position for baking needs.
Set oven temperature 25°F/12°C lower than recommended.
•
Oven too hot.
•
•
•
Incorrect pan size.
Pan not centered in oven.
•
•
Set oven temperature 25°F/12°C lower than recommended.
Use pan size suggested in recipe.
Use proper rack position and place pan so there is
5.1 cm to 10.2 cm (2" to 4") of space on all sides of
pan.
•
Range not level.
•
•
•
•
Pan too close to oven wall or
rack overcrowded.
Pan warped.
Foods not done
•
Oven too cool.
•
when cooking
time is up.
•
Oven overcrowded.
•
•
Oven door opened too frequently.
•
Cakes too dark on
•
top or bottom.
Cakes not done in
the center.
Cakes not level.
•
y
2O
Place a marked glass measuring cup filled with water on the center of the oven rack. If the water level
is uneven, refer to the installation instructions for
leveling the range.
Be sure to allow 5.1 cm to l0.2 cm (2" to 4") of
clearance on all sides of each pan in the oven.
Do not use pans that are dented or warped.
Set oven temperature 25°F/12°C higher than suggested and bake for the recommended time.
Be sure to remove all pans from the oven except
the ones to be used for baking.
Open oven door only after shortest recommended
baking time.
Setting Oven Controls
Setting
Cook Time
The BAKE _
and COOK TiME @
pads control the Cook Time feature. The automatic timer of the Cook Time
feature will turn the oven OFF after cooking for the desired amount of time you selected.
INSTRUCTIONS
PR ESS
To program the oven to begin baking immediately
and to shut off automatically
(example : Bake at
350°F for 30 minutes)
1.
2.
Be sure the clock is set for the correct time of day.
Arrange interior oven rack(s) and place the food in the oven,
3.
Press _%_.
4.
Press _
(Fig. 1).
4.
Press _-A_
(Fig. 2). The actual oven temperature
DISPLAY
Fig. 1
@
Fig. 2
will be
Fig. 3
displayed.
5.
Press @
(Fig. 3).
@
6. Enter the desired baking time by pressing (_
@
(Fig. 4).
Note: Baking time can be set for any amount of time between 1
minute to 11 hours and 59 minutes..
7.
Press (_.
The display returns to the time of day (Fig. 5).
(_@
Fig. 4
(_
ii
Fig. 5
Note: After the Timed Bake feature has been activated, press @
to display the bake time remaining in the Timed Bake mode. Once
Timed Bake has started baking, a beep will sound when the oven
temperature reaches the set temperature.
Press (sTO_}when baking has finished or at any time to cancel the
v
Timed Bake feature.
When the timed bake finishes:
1.
2.
"End", and the time of day will show in display. The oven will
shut off automatically (Figure 6).
The control will beep 3 times. The control will continue to beep
3 times every 30 seconds until _To_}is pressed.
21
Fig. 6
:':
Setting Oven Controls
Setting
Delay Start
and DELAY START _
pads control the Delay Start feature. The automatic timer of
v
COOK TIME _
v
The BAKE _,
the Delay Start feature will turn the oven on and off at the time you select in advance.
Note: If your clock is set for normal 12 hour display mode the Delayed Timed Bake or Delayed Timed Convection Bake cycle
can never be set to start more than 12 hours in advance.
INSTRUCTIONS
To program the oven for a delayed BAKE start
and to shut off automatically
(example: baking
350°F for 30 minutes and starting at 5:30)
PRESS
time
at
Fig. 1
1.
2.
Be sure that the clock is set with the correct time of day.
Arrange interior oven rack(s) and place the food in the oven.
3.
Press @.
4.
Press @
(Fig. 1).
5.
Press (_
(Fig, 2).
6.
7.
Press @
(Fig. 3).
Enter the desired baking time using the number pads by
@
Press _
9.
Press @
Fig. 3
@
Fig. 4
(Fig. 6).
Fig. 5
(_
(Fig. 7).
11. Press _A_.
@@
@
(Fig, 5).
10. Enter the desired start time using the number pads (_
Fig. 2
@
pressing (_
@
(Fig. 4). Note: Baking time can be set for
any amount of time from 1 minute to 11 hours and 59 minutes,
8.
DISPLAY
The current time of day will appear in the display
(Fig. 8).
12. When the desired start time is reached, the oven icon will appear
in the display and the oven will start to bake at the previously
selected temperature.
(3)@@
Fig. 6
Fig. 7
Press _TOi) when baking has completed or at any time to cancel
v
the Delayed Time Bake feature.
Fig. 8
When the set bake time runs out:
1. "End" will appear in the display and the oven will shut off
automatically (Fig. 9).
2. The control will beep 3 times, The control will continue to beep
Fig. 9
3 times every 30 seconds until _o_ is pressed,
Use caution with the DELAYED TIME BAKE feature. Use this feature when cooking cured or frozen meats
and most fruits and vegetables. Foods that can easily spoil such as milk, eggs, fish, meat or poultry, should be chilled in the
refrigerator first. Even when chilled, they should not stand in the oven for more than 1 hour before cooking begins, and should
be removed promptly when cooking is completed. Eating spoiled food can result in sickness from food poisoning.
22
Setting Oven Controls
Setting
Broil
The _
pad controls the Broil feature. When broiling, heat radiates downward from the oven broiler for even coverage.
The Broil temperature may be set between 400°F and 550°F.
The broil pan and broil pan insert used together allow dripping grease to drain and be kept away from the high heat of the
oven broiler. DO NOT use the broil pan without the insert (See Fig. 5). DO NOT cover the broil pan insert with foil. The
exposed grease could catch fire.
Should an oven fire occur, leave the oven door closed and turn off the oven. If the fire continues, throw baking
soda on the fire or use a fire extinguisher. DO NOT put water or flour on the fire. Flour may be explosive and water can cause
a grease fire to spread and cause personal injury.
INSTRUCTIONS
To set the oven to broil at 550°F
1.
PRESS
Place the broiler pan insert on the broiler pan. Then place the
food on the broiler pan insert. DO NOT use the broiler pan
without the insert. DO NOT cover the broiler insert with foil.
2.
The exposed grease could ignite.
Arrange the interior oven rack.
3.
Press@.
4.
Press_
5.
If a lower broil temperature is desired (minimum broil
temperature setting is 400°F), press the desired temperature
before continuing to step 6.
(._
(Fig. 1).
6.
Press
7.
Preheat the oven for 2 minutes.
8.
Place the broiler pan on the rack. Be sure to center the broiler
pan directly under the broiler element. Make sure the oven door
is in the broil stop position (Fig. 4).
Broil on one side until food is browned; turn and cook on the
second side. Season and serve. Note: Always pull the rack out
to the stop position before turning or removing food.
9.
_'TART_(Fig. 2). The oven will begin to broil.
Broil Stop Position
Fig. 4 ......
10. To cancel broiling or if finished broiling press _To_ (Fig. 3).
Broiling
Times
and Searing
_
Grill (if equipped)
Use the following table for approximate broiling times. Increase or decrease broiling times,
or move the broiling pan to a different rack position to suit for doneness. If the food you are
broiling is not listed in the table, follow the instructions provided in your cookbook and
watch the item closely. Use the Searing Grill for meats and steaks if desired. Before placing
the meat, be sure to heat the Searing Grill using Broil for 10 minutes. Cook times should be
reduced 1-2 minutes per side when cooking with the Searing Grill. Place Searing Grill on
top of Broiler Pan and insert for meats and steaks (See Fig. 6).
Fig. 5 - Broiling Pan and Insert
(Supplied with some models)
Electric Range Broiling Table Recommendations
Food
Lower Oven Upper Oven
Temp
Cook Time
Item
Rack Position Rack Position
Setting
1st side
2nd side
Doneness
Steak 1"thick
3rd
1st
550° F
6:00
4:00
Rare
3rd
1st
550 ° F
7:00
5:00
Medium
Pork Chops 3/4" thick
Chicken - Bone In
Chicken - Boneless
Fish
3rd
4th
3rd
3rd
1st
1st
1st
1st
550 °
450 °
450 °
500 °
F
F
F
F
8:00
20:00
8:00
13:00
6:00
10:00
6:00
n/a
Well
Well
Well
Well
Shrimp
Hamburger 1" thick
4th
3rd
4th
1st
1st
1st
550 ° F
550 ° F
550 ° F
5:00
9:00
10:00
n/a
7:00
8:00
Well
Medium
Well
23
Grill
Searing
_-\_L
Broil
Pan_
& insert
Fig. 6 - Searing Grill
(Supplied with some models)
Setting Oven Controls
Setting
the Food
Categories
co.v
Features
,owe
oven
osewhen
v
cooking certain food items. These pads have been designed to give optimum cook performance for the foods selected
in each category.
The CONV ROAST pad combines a cook cycle with the convection fan and element to roast meats and poultry.
Preheating is not necessary for meats and poultry. Heated air circulates around the food from all sides, sealing in
juices and flavors. Foods are crisp brown on the outside while staying moist on the inside. DO NOT cover food during
convection roast. Note: This feature is only avalaible in the lower oven.
The CAKES pad provides a preheat with a gentle cycling of heat giving cakes more volume and allowing delicate foods
to cook more evenly.
The BREADS pad adds a preheat feature to the bake cycle to thoroughly heat the oven from top to bottom to give
more evenly browned foods. Refer to Fig. 3 for foods to cook in each category.
The PIZZA pad let you choose a preset between a frozen (Fro) pizza (450°F) and a fresh (Frh) pizza (425°F). Always
follow the instructions on the box for preheating and baking times. The _
pad can be pressed to alternate between
the presets. If needed, a different target temperature than the preset can be entered. Some fresh pizza request using a
Broil for a few minutes but it is not part of the Pizza feature. When used in the lower oven, this feature will activate and
display the convection fan to help cooking on multiple racks at once. Note: The upper oven will preheat faster than the
lower oven.
INSTRUCTIONS
To Set the Food
Convection
PRESS
Roast feature
DISPLAY
at 375°F
1. Arrange oven racks.
@
2. Press (_.
2. Press @
(Fig. 1).
Fig. 1
3. Enter the desired roasting temperature
@Cbd
4. Press _
Press (s_
using the number pads
QOQ
(Fig. 2). The fan icon will be displayed.
(_
Fig. 2
to stop Convection Roast at any time.
Note: The Cakes, Breads or Pizza features may be programmed like
the example provided above. It is recommended to follow the recipe
instructions with the food item package.
Recommended
foods to be
cooked in
each category
CONV ROAST
(lower oven only)
Meat
Poultry
Fig. 3
Roasting
Rack Instructions
CAKES
BREADS
PIZZA
Cakes
Brownies
Pies (fresh & Frozen)
Baked Custards
Cheesecake
Breads
Rolls
Biscuits
Muffins
Cornbread
Fresh Pizza
Frozen Pizza
Supplied with some
models - Fig. 4
(if equipped)
When preparing meats for convection roasting, use broiler pan and insert along with the roasting rack. The broiler pan
will catch grease spills and the insert will prevent grease splatters. The roasting rack will allow the heat to circulate
around the meat.
To prevent food from contacting the broil element and to prevent grease splattering, DO NOT use the
roasting rack when broiling.
1. Place oven rack on bottom or next to the bottom rack position. Heated air circulates under the food for even cooking
and helps to increase browning on the underside. Make sure the roasting rack is securely seated on the insert in the
broiler pan. DO NOT use the broiler pan without the insert. DO NOT cover the insert with aluminum foil.
2. Position food (fat side up) on the roasting rack (Fig. 4).
3. Place the broiler pan on the oven rack.
24
Setting Oven Controls
Setting
Convection
The CONVECTION
Use the Convection
can be programmed
F (77 ° C) to 550 ° F
Bake
- Lower
Oven Only
BAKE k_k_,,,pad controls the Convection Bake feature.
Bake feature when cooking speed Jsdesired. The oven
for Convection baking at any temperature between 170 °
(288 ° C).
Air
circuJation
during
Convection
Bake
Convection baking uses a fan to circulate the oven's heat evenly and
continuously within the oven (See Figure 1). This improved heat distribution
allows for fast, even cooking and browning results. It also gives better baking
results when using 2 or 3 racks at the same time. Breads and pastries brown
more evenly. Convection bake cooks most foods faster and more evenly than
conventional baking.
Fig. 1
4th Rack
)osition
3rd Rack
)osition
Note: This feature is only avalaible in the lower oven.
2nd Rack
)osition
General
1 st Rack
1.
2.
3.
Convection
Bake
Instructions
position
When using Convection Bake, check food at minimum cooktime.
Preheating is not necessary when cooking casseroles with Convection
Fig. 2
Bake.
When using Convection Bake with a single rack, place
Benefits of Convection Bake:
oven rack in position 2 or 3. If cooking on multiple racks,
--Multiple rack baking.
place the oven racks in positions 2 and 4.
--Some foods cook faster, saving time and energy.
--No special pans or bakeware needed.
INSTRUCTIONS
To set the oven for Convection
PRESS
DISPLAY
©
Fig. 3
Bake and
temperature
to 350°F
1. Arrange interior oven racks and place food in oven.
2.
Press (_.
2.
Press @
4.
Press @.
@
(Fig. 3).
Fig. 4
Note: The oven icon will appear and the rotating fan will start
running in the display. The bake (Fig. 4), broil (Fig. 5) and
convection (Fig. 6) elements icon will show intermittently in the
display indicating which element is on to help the oven
reaching the desired temperature. A beep will sound once the
oven temperature reaches 350°F.
Note: The convection fan will start AS SOON AS the oven is set for
Convection Bake.
Press (_
\.j
to cancel Convection Bake at any time.
25
Fig. 5
Fig. 6
iiil
................
...........
ii.......
Setting Oven Controls
Setting
Convection
Convert
- Lower
pad is used to automatically
Oven Only
convert a standard Baking recipe for convection baking.
v
The CONV CONVERT _
feature
When set properly, this feature is designed to display the oven set converted (reduced) temperature in the display.
Convection Convert MUST be used with the Convection Bake keypad. Cook Time or Delay Start function may be
added. Note: This feature is only avalaible in the lower oven.
PRESS
INSTRUCTIONS
DISPLAY
Using Convection
Convert
(Bake) feature
to
automatically
adjust oven temperature
(e×ample:
setting oven for 350°F):
1.
Arrange interior oven racks and place food Jnoven,
2.
Press (_
3.
Press _o_
Fig. 1
Ok.qZ_rd"
(Fig. 1). If a Cook Time or a Delayed Start
(Delayed Timed Bake) is desired, enter the times now.
4.
Press _.
@
"CONV BAKE" and the oven temperature
Fig. 2
adjustment will appear briefly in the display (for this example it
is 325°F). A beep will sound once the adjusted oven
temperature is reached (Fig. 2).
Note: When used with a Cook Time or a Delay Start setting, the
Convection Convert feature will display a "CF" for check food
when the bake time is 75% complete (Fig. 3). At this time the oven
control will sound 3 long beeps at regular intervals until baking has
finished. When the bake time has completely finished the control
will display "End" (Fig. 4) and will sound 3 long beeps every 30
seconds until the (_To_}pad is pressed.
\j
The oven icon will show a rotating fan within the square. This
rotating fan icon indicates when the Convection Fan is operating.
Press (s_
to cancel Convection feature at any time.
Note: The minimum amount of cook time using the Convection
Convert feature with a Cook Time or Delay Start function is 20
minutes.
26
Fig. 3
Fig. 4
Setting Oven Controls
Setting
the Slow Cook
Feature
The @
slowly, at
The Slow
becoming
SLOW COOK pad is used to activate this feature. The Slow Cook feature may be used to cook foods more
lower oven temperatures and provides cooking results much the same way as a Slow Cooker or Crock-Pot.
Cook feature is ideal for roasting beef, pork & poultry. Slow Cooking meats may result in the exterior of meats
dark but not burnt. This is normal.
There are 2 settings available, high (Hi) or low (Lo). The low setting is best for cooking foods from 8 to 9 hour time
period. The high setting is best for cooking foods from 4 to 5 hour time period. The maximum cook time for the Slow
Cook feature is 12 hours unless the oven control has been changed to the Continuous Bake mode. This feature may
be used with the additional settings of a Cook Time or a Delayed Start.
Below is a list of preparation and cooking tips you should review for best possible results using Slow Cook:
Completely thaw all frozen foods before cooking with the Slow Cook feature.
When using a single rack, place in position 2 or 3.
Position multiple racks to accommodate size of cooking utensils when cooking multiple food items.
Do not open the oven door often or leave the door open when checking foods. If the oven heat escapes often, the
Slow Cook time may need to extended.
Cover the foods to keep them moist or use a loose or vented type cover to allow foods to turn crisp or brown.
Cook times will vary; depending on the weight, fat content, bone & the shape of the food.
Use the recipe's recommended food temperature and a food thermometer to determine when the food is done.
Preheating the oven will not be necessary when using the Slow Cook feature.
Add any cream or cheese sauces during the last hour of cooking.
iiil
................
INSTRUCTIONS
To Program the Oven
Cook feature
to begin
1.
Place the food in the oven.
2.
Press (Lo_'_
Ovk.qZ_
•
3.
Press @.
4.
If Io setting is desired, press @
PRESS
baking
DISPLAY
with the Slow
:::::::::::::::::::::::
Fig. 1
"SLO" and "Hi" will appear in the display (Fig 1).
again, "Lo" will appear in
Fig. 2
the display (Fig. 2).
5.
Press _ARTj._.The slow cook feature will activate (Fig. 3).
6.
If desired, add any Cook Time or Delayed Start settings at
this time.
7.
To cancel the Slow Cook feature press _
'\.j/
at anytime.
27
@
Fig. 3
Setting Oven Controls
Setting
the Warm
& Hold
The Warm & Hold _
TM
Feature
pad turns ON the Warm & Hold feature and will maintain an oven temperature of 170°F (77°C). The
Warm & Hold feature will keep oven baked foods warm for serving up to 3 hours after cooking has finished. After 3 hours the
Warm & Hold feature will shut the oven OFF. The Warm & Hold feature may be used without any other cooking operations
or can be used after cooking has finished using BAKE, CONVECTION BAKE.
The Warm & Hold feature may be used with COOK TIME if you wish to have the Warm & Hold feature turn ON automatically
when cooking has finished. The Timed Bake features require you to set start time and the amount of cooking time. With this
information the control can calculate the time when cooking will complete and can then start the Warm & Hold feature
automatically.
INSTRUCTIONS
To set Warm & Hold
PRESS
1.
Arrange interior oven racks and place food in oven.
2.
Press @.
3.
Press _.
DISPLAY
Fig. 1
"HLd" will appear in the display (Fig. 1).
Note: If no pad is touched within 25 seconds the request to turn ON Keep
Warm feature will be cancelled.
Fig. 2
4.
Press _.
"HLd" will remain on and the oven icon will appear in
the display (Fig. 2).
5.
To turn the Warm & Hold OFF at any time press _To_).
Fig. 3
v
Note: The Warm & Hold feature will automatically
hours.
turn OFF after 3
To set Warm & Hold to turn ON automatically
Fig. 4
1.
Arrange interior oven racks and place food in oven. Set the oven
properly for Cook Time or Delay Start,
2.
Press _.
"HLd" will appear in the display (Fig. 3).
Note: If no pad is touched within 25 seconds the request to turn ON the
Keep
Warm feature and all functions previously programmed will be cleared,
3.
Press _.
"LOWER" and "WARM" will stop flashing and remain
in the display. Also temperature
display (Fig. 4).
programmed will appear in the
4.
When the Time Bake has finished, the keep warm mode will turn
ON automatically (Fig. 5).
Note: The Keep Warm feature will automatically turn OFF after 3 hours.
Pressing s_)
@
at any time will stop all oven baking operations.
28
Fig. 5
Setting Oven Controls
To Set the Sabbath
The @
only
Feature
COOK TIME and @
be used with the _
(for use on the Jewish Sabbath
& Holidays)
DELAY START pads are used to set the Sabbath feature, The Sabbath feature may
pad. The oven temperature
may be set higher or lower after setting the Sabbath feature
(the oven temperature adjustment feature should be used only during Jewish Holidays), however the display will not
visibly show or provide any audible tones indicating whether the change occurred correctly. Once the oven is properly
set using Bake with the Sabbath feature active, the oven will remain continuously ON until cancelled. This will override
the factory preset 12-Hour Energy Saving feature. If the oven light will be needed during the Sabbath, press -,_,'-_
before activating the Sabbath feature. Once the oven light is turned ON and the Sabbath feature is active, the oven
light will remain ON until the Sabbath feature is turned OFF. If the oven light needs to be OFF, be sure to turn the oven
light OFF before activating the Sabbath feature. IMPORTANT NOTES: It is not advised to attempt to activate any other
program feature other than BAKE while the Sabbath feature is active. ONLY the following key pads will function after
setting the Sabbath feature; @
to @,
B_'a-k_,@
& _.
ALL OTHER KEYPADS will not function once the
Sabbath feature is properly activated.
INSTRUCTIONS
To Program
Immediately
PR ESS
DISPLAY
the Oven for 350°F Begin Baking
& activate the Sabbath feature
1.
2.
Be sure that the clock is set with the correct time of day.
Place the food in the oven.
3.
Press @.
4.
Press _
5.
If you desire to set the oven control for a Cook Time or Delay
Start do so at this time. If not, skip this step and continue to
step 6. Refer to the Cook Time or Delay Start section for
complete instructions. Remember the oven will shut down after
using Cook Time or Delay Start and therefore may only be
used once during the Sabbath/Jewish Holidays. The maximum
Delay Start time is 11 hours & 59 minutes.
The oven will turn ON and begin heating. If you desire to set
both oven ON for the Sabbath, you should set both at this time.
If you just want one oven ON so continue to step 7.
(Fig. 1).
i
Press @
Fig. 1
6.
(Fig. 2).
Fig. 2
7. Press
and
ho,d
both
the@ and
@ pads
forat,east
3
.....
Fig. 3
and
seconds. "SAb" will appear in the display (Fig. 3). Once SAb appears in the display the oven control will no longer
beep or display any further changes. The oven is properly set for the Sabbath feature.
Note: You may change the oven temperature once baking has started. Press _,
enter the oven temperature
(170 to 550°F) and then press _-A_
TWICE (for Jewish Holidays only). Remember that the oven control
longer beep or display
changes
8.
any further
change
will no
once the oven is set for the Sabbath feature.
The oven may be turned OFF at any time by first pressing _0_) pad (this will turn the oven OFF only). To turn OFF
the Sabbath feature press and hold both the _
v
and s_
pads for at least 3 seconds. This also turns off the oven.
v
SAb will disappear from the display.
Should you experience a power failure or interruption, the oven will shut off. When power is returned the oven will not
turn back on automatically. If your food was nearly fully cooked, you may allow the trapped heat in the oven to finish the
cooking process. Otherwise, you should remove the food when the power failure occurs, because you may only start the
oven once during the Sabbath/Jewish Holidays. After the Sabbath observance turn OFF the Sabbath feature and the
oven may be used with all normal functions.
After the Sabbath observance turn OFF the Sabbath feature. Press and hold both the _
and _
pads for at least 3
v
seconds. SAb will disappear from the display and the oven may be used with all normal functions. For further assistance,
guidelines for proper usage, and a complete list of models with the Sabbath feature, please visit the web at
htt p:\\www.star-k.org.
29
Setting Oven Controls
To Set
the Recipe
Recall
Feature
This feature will ONLY recall a Bake, Convection Bake, Cakes, Breads, Convection roast, Slow Cook, Cook Time
or a Cook Time with a Warm & Hold added setting. This feature will not work with any other function including a Delay
Start, a Clean Cycle or a Broil setting. NOTE: This feature can only store one recipe at a time.
iNSTRUCTiONS
To Program the Oven to Begin
and record a Recipe (example:
425°C)
1.
Place the food in the oven.
2.
Press @.
3.
Press (_
4.
Press _
5.
Press and hold _.A_
PRESS
Baking immediately
for a Bake mode at
Fig. 1
@
G
(Fig. 1).
_
QOQ
_.
(Fig. 2) pad for at least 3 seconds or
_for
3 seconds
until a beep sounds. The beep indicates that this recipe has
been recorded for future recall.
To Program
Recipe
the Oven
to Begin
Baking
with a stored
1.
Place the food in the oven.
2.
Press _
3.
The Temperature (and the cook time, if programmed) is
recalled, the oven will begin immediately to cook with the
and then @
__._
(Fig. 2).
previously recorded recipe.
To quickly
DISPLAY
erase all stored
recipes
1.
Press and hold _
seconds).
pad until the first single beep sounds (6
2.
After the first beep press the __.ARj_pad once. Any stored
recipes will be erased. Please Note: Clearing the recipes will
also reset all other adjustments back to the factory settings.
These include 12 or 24 Hour Time of Day display,
Continuous Bake or 12 Hour Energy Savings mode, Silent
Control Operation, Fahrenheit or Celsius Temperature
Display and any Oven Temperature adjustments that are set.
3O
and then
Fig. 2
Self=Cleaning
@
During the self-cleaning cycle,
the outside of the wall oven can become
very hot to the touch. DO NOT leave a small
children unattended near the appliance.
@
STOP
The health of some birds is
extremely sensitive to the fumes given off
during the self-clean cycle of any oven.
Move birds to another well ventilated room.
DO NOT line the oven walls,
racks, bottom or any other part of the
appliance with aluminum foil. Doing so will
destroy heat distribution, produce poor
baking results and cause permanent
damage to the interior (aluminum foil will
melt to the interior surface of the oven).
DO NOT force the oven door
open. This can damage the automatic door
locking system. Use caution when opening
the door after the Self-Cleaning cycle is
completed. The oven may still be VERY
HOT.
DO Hand
Clean Frame
Self-Cleaning
Oven
A Self-Cleaning oven cleans itself with high temperatures (well above
cooking temperatures) which eliminate soils completely or reduces
them to a fine powdered ash you can wipe away with a damp cloth.
Adhere to the following cleaning precautions:
,, Allow the oven to cool before cleaning.
,, Wear rubber gloves when cleaning any exterior parts of the oven
manually.
,, DO NOT clean the oven door gasket. The woven material of the
oven door gasket is essential for a good seal. Care should be
taken not to rub, damage or remove the gasket.
,, DO NOT use any cleaning materials on the oven door gasket.
Doing so could cause damage.
,, Remove the meat probe, searing grill, broiler pan and broiler
pan insert, all ustensils and any aluminum foil. Remove the
iiil
................
oven racks and oven rack supports from the upper oven.
These items cannot withstand high cleaning temperatures.
...........
ii.......
,, The lower oven comes with lubricated porcelain oven racks, which
can remain in the oven during the self-clean cycle. Do not clean
this vegetable oil lubrication off the racks. It is important that the
sides of the oven racks always have a light coating of vegetable oil.
To maintain optimal rack performance, re-apply a thin layer of
vegetable oil to the sides of the rack after every self-clean cycle or
when the rack becomes difficult to slide.
,,
DO Hand
Clean Door
DO NOT Hand Clean
Oven Door Gasket
Note: See additional cleaning information for
the oven door in the General Care &
Cleaning section.
Fig. 1
The oven bake and broil
elements may appear to have cooled after
they have been turned OFF. The elements
may still be hot and burns may occur if
these elements are touched before they
have cooled sufficiently.
Remove any excessive spillovers in the oven cavity before
starting the Self-Cleaning cycle. To clean, use hot, soapy water
and a cloth. Large spillovers can cause heavy smoke or fire when
subjected to high temperatures. DO NOT allow food spills with a
high sugar or acid content (such as milk, tomatoes, sauerkraut, fruit
juices or pie filling) to remain on the surface as they may leave a
dull spot even after cleaning.
,, Clean any soil from the oven frame, the door liner outside the oven
door gasket and the small area at the front center of the oven
bottom. These areas heat sufficiently to burn soil on. Clean with
soap and water.
NOTE: Prior to setting the Self-Clean cycle, any spills remaining on the
oven bottom should be removed.
If any time when setting the oven for the Self-Cleaning feature, the
oven control continuously beeps and the display shows "d-O"; close the
oven door (see fig. 1)
What to Expect
during
Cleaning
While the oven is in operation, the oven heats to temperatures much
higher than those used in normal cooking. Sounds of metal expansion
and contraction are normal. Odor is also normal as the food soil is being
removed. Smoke may appear through the oven vent.
If heavy spillovers are not wiped up before cleaning, they may flame
and cause more smoke and odor than usual. This is normal and safe
and should not cause alarm. If available, use an exhaust fan during the
self-cleaning cycle.
31
Self-Cleaning
To avoid possible burns use
To Start the Self-Clean
Cycle
The FLEX CLEAN @
pad controls the Self-Cleaning feature. If you are
planning to use the oven directly after a self-clean cycle remember to allow
time for the oven to cool down and the oven door to unlock. This normally
takes about one hour. So a 3 hour self-clean cycle will actually take about
4 hours to complete.
*It is recommend to use a 2 hour self-clean cycle for light soils, a 3 hour
cycle for average soils, and a 4 hour cycle for heavy soils (to assure
satisfactory results).
iNSTRUCTiONS
care when opening the oven door after the
Self-Cleaning cycle. Stand to the side of the
oven when opening the door to allow hot air or
steam to escape,
DO NOT force the oven door
open. This can damage the automatic door
locking system. Use caution and avoid possible
burns when opening the door after the SelfCleaning cycle has completed. The oven may
still be VERY HOT.
PRESS
To Start an immediate Self-Cleaning
cycle or to set a
Delay Start time of 4:30 and shut-off automatically
(example provided is a default 3 hour Self-Clean
Cycle)
1.
Be sure the clock is set with the correct time of day and the
oven door is closed.
2.
Press @.
3.
Press _.
"LOWER" and "CLEAN" will flash and "3:00 HR"
DISPLAY
Fig. 1
@
@
Fig. 2
will show in the display (Fig. 1). The control will automatically
clean for a 3 hour period (default self-cleaning cycle time).
Note: if a 2 or 4 hour clean time is desired, press (_
@
@
for 2 hour or press @
@
@
for a 4 hour clean
time. Set the cleaning time based on the amount of soil: light,
medium or heavy (* See above).
4.
O@@or
Q@@
Fig. 4
Press STA_. The "DOOR LOCKED" icon will flash;
"LOWER", "CLEAN", I_ icon and the letters "CLn" will remain
on in the display (Fig. 2).
5. As soon as the control is set, the motor driven oven door lock
will begin to close automatically. Once the door has been
locked the "DOOR LOCKED" indicator light will stop flashing
and remain on. Also, the oven icon will appear in the display
(Fig. 3).
Note: Allow about 15 seconds for the oven door to lock. The
cooktop will also be lockout and will not be avalaible during
the self-clean cycle.
Fig. 5
Fig. 6
Note: if the optional delay Self=Clean feature is desired,
perform steps 6-9. If Self=Clean is started immediately skip the
remaining steps and continue with "When the Self=Clean cycle
is completed" on the following page.
6.
Press @
(Fig. 4). Enter the desired start time using the
number pads (_)
7.
9.
Fig. 3
Press _A_.
_3,_ @
(Fig. 5).
"CLEAN", "DELAY", "LOCK", "LOWER" and
"DOOR"' will be displayed (Fig. 6).
The control will start the self-cleaning at the set start time, for
the period of time previously selected. At that time, the icon
"DELAY" will go out.
32
@
QQ@
Self Cleaning
iNSTRUCTiONS
When the Self-Clean
1.
2.
Cycle
PRESS
is Completed
"HOT" will appear in the display. The time of day, the "DOOR LOCKED", I_ and "CLEAN" icon will
remain in the display.
Once the oven has cooled down for approximately 1 HOUR, and the "DOOR LOCKED" icon is no longer
displayed, the oven door can then be opened.
Stopping
or interrupting
a Self-Cleaning
Cycle
If it becomes necessary to stop or interrupt a self-cleaning cycle due to excessive smoke or fire in the oven:
1.
Press @.
2.
The oven door can only be opened after the oven has cooled down for approximately 1 HOUR and the "DOOR
LOCKED" icon is no longer displayed.
Note: If your clock is set for normal 12 hour display mode the Delayed Self-Clean cycle can never be set to start more
than 12 hours in advance. To set for Delayed Self-Clean Cycle 12-24 hours in advance set the control for the 24 hour
time of day display mode.
Adjusting Oven Temperature
The temperature in the oven has been pre-set at the factory. When first using the
oven, be sure to follow recipe times and temperatures. If you think the oven
temperature is cooking too hot or too cool for the temperature you select, you can
adjust the actual oven temperature to be more or less than what is displayed. Before
adjusting, test a recipe by using a temperature setting that is higher or lower than the
recommended temperature. The baking results should help you to decide how much
of an adjustment is needed.
iNSTRUCTiONS
To adjust
PR ESS
Press iLow';;_
2.
Press and hold _
3.
number will appear and "UPPER" will flash in the display
(Fig. 1).
To increase the temperature use the number pads to enter the
not change the Self-Clean
cycle or Broil temperature.
DISPLAY
for 6 seconds. The preset adjustment
Fig. 1
desired change. (Example 30°F) (_
@
(Fig. 2). The
temperature may be increased as much as 35°F (19°C). To
decrease the temperature use the number pads to enter the
(_)
@
desired change. (Example -30°F)(_
(_
@
(Fig. 3). The temperature
@
and then press
may be decreased as much as
35°F (19°C).
4.
temperature adjustments
made with this feature will
the oven temperature
1.
@
Note: The oven
Press _ART_ to accept the temperature change and the display
will return to the time of day. Press _
to reject the change if
necessary,
NOTE: Each oven may be adjusted individually.
33
Fig. 2
Fig. 3
General Care & Cleaning
Cleaning Various Parts of Your Range
Before cleaning any part of the oven, be sure all controls are turned OFF and the oven is COOL. REMOVE SPILLOVERS
AND HEAVY SOILING AS SOON AS POSSIBLE. REGULAR CLEANING NOW WILL REDUCE THE EXTENT AND
DIFFICUTY OF MAJOR CLEANING LATER.
Surfaces
How to Clean
Aluminum (Trim Pieces)
& Vinyl
Use hot, soapy water and a cloth. Dry with a clean cloth. Do not scour or use all-purpose
cleaners, ammonia, powdered cleaners or commercial oven cleaner. They can scratch
and discolor aluminum.
Painted and Plastic,
Body Parts and Decorative
Trim
For general cleaning, use hot, soapy water and a cloth. For more difficult soils and builtup grease, apply a liquid detergent directly onto the soil. Leave on soil for 30 to 60
minutes. Rinse with a damp cloth and dry. DO NOT use abrasive cleaners on any of
these materials; they can scratch.
Stainless Steel, Chrome,
Decorative Trim
Clean stainless steel with hot, soapy water and a dishcloth. Rinse with clean water and
a cloth. Do not use cleaners with high concentrations of chlorides or chlorines. Do
not use harsh scrubbing cleaners. Only use kitchen cleaners that are especially made
for cleaning stainless steel. Always be sure to rinse the cleaners from the surface as
bluish stains may occur during heating that cannot be removed.
Porcelain Enamel,
Broiler Pan and Insert, Door
Liner, Body Parts
Gentle scouring with a soapy scouring pad will remove most spots. Rinse with a 1:1
solution of clear water and ammonia. If necessary, cover difficult spots with an
ammonia-soaked paper towel for 30 to 40 minutes. Rinse with clean water and a damp
cloth, and then scrub with a soap-filled scouring pad. Rinse and wipe dry with a clean
cloth. Remove all cleaners or the porcelain may become damaged during future heating.
DO NOT use spray oven cleaners on the cooktop.
Oven Racks
This oven comes with lubricated porcelain oven racks, which can remain in the oven
during the self-clean cycle. Do not clean this vegetable oil lubrication off the racks. It is
important that the sides of the oven racks always have a light coating of vegetable oil.
To maintain optimal rack performance, re-apply a thin layer of vegetable oil to the sides
of the rack after every self-clean cycle or when the rack becomes difficult to slide.
Oven Door
Use soap & water to thoroughly clean the top, sides and front of the oven door. Rinse
well. You may use a glass cleaner on the outside glass of the oven door. DO NOT
immerse the door in water. DO NOT spray or allow water or the glass cleaner to
enter the door vents. DO NOT use oven cleaners, cleaning powders or any harsh
abrasive cleaning materials on the outside of the oven door.
DO Hand
Clean Frame
DO Hand
Clean
Hand Clean'
Oven Door
Gasket
Ceramic Cooktop
DO NOT clean the oven door gasket. The oven door gasket is made of a woven
material, on Self-Cleaning models, which is essential for a good seal. Care should be
taken not to rub, damage or remove this gasket.
Follow the instructions under the Cooktop Cleaning & Maintenance in this Use & Care
Guide.
34
General Care & Cleaning
Ceramic
Glass Cooktop
Consistent
and proper
(cont'd)
Cleaning
cleaning
& Maintenance
is essential
to maintaining
your Ceramic glass
cooktop
Prior to using your cooktop for the first time, apply the recommended CookTop® Cleaning Creme to the ceramic surface
(on the web visit www.sears.com
for replacement cooktop cleaner, item number 40079). Buff with a non-abrasive cloth
or no=scratch cleaning pad. This will make cleaning easier when soiled from cooking. The special cooktop cleaning
cream leaves a protective finish on the glass to help prevent scratches and abrasions.
t
Sliding aluminum or copper clad bottom pans on the cooktop can cause metal
markings on the cooktop surface. These marks should be removed immediately
after the cooktop has cooled using the cooktop cleaning cream. Metal marks can
become permanent if not removed prior to future use.
Cookware (cast iron, metal, ceramic or glass) with rough bottoms can mark or
scratch the cooktop surface. Do not slide anything metal or glass across the
cooktop. Do not use your cooktop as a cutting board or work surface in the kitchen.
Do not cook foods directly on the cooktop surface without a pan. Do not drop heavy
or hard objects on the glass cooktop, because they may cause it to crack.
Cleaning
Recommendations
for the Ceramic
Glass Cooktop
iii/
..............
For light to moderate soil:
Apply a few drops of CookTop® Cleaning Creme directly to the cooktop. Use a paper towel or use a non=abrasive
plastic type no=scratch cleaning pad to clean the entire cooktop surface. Make sure the cooktop is cleaned thoroughly,
leaving no residue.
For heavy, burned on soil:
Apply a few drops of CookTop® Cleaning Creme directly to the soiled area. Rub the soiled area using a non-abrasive
plastic type no=scratch cleaning pad, applying pressure as needed. Do not use the pad you use to clean the cooktop for
any other purpose.
If soils remain, carefully scrape soils with a metal razor blade scraper, holding
scraper at a 30 degree angle to the surface. Remove loosened soils, then apply a
few drops of cleaning cream and buff surface clean.
IIVIPORTANT NOTE: Damage to the ceramic glass cooktop may occur if you use
an abrasive type scratch pad. Only use cleaning products that have been specifically designed for ceramic glass cooktop.
Plastic or foods with a high sugar content:
These types of soils need be removed immediately if spilled or melted onto the
ceramic cooktop surface. Permanent damage (such as pitting of the cooktop
surface) may occur if not removed immediately. After turning the surface elements OFF, use a razor blade scraper or a metal spatula with a mitt and scrape the
soil from the hot surface (as illustrated). Allow the cooktop to cool, and use the
same method for heavy or burned on soils.
35
Do not use the following on the ceramic glass cooktop:
• Do not use abrasive cleaners and scouring pads, such as metal and some
nylon pads. They may scratch the cooktop, making it more difficult to clean.
General
Cleaning
• Do not useCare
harsh &
cleaners,
such as(cont'd)
chlorine bleach, ammonia or oven
cleaners, as they may etch or discolor the cooktop.
J
,, on
Do the
not cooktop
use dirty sponges,
as they can leave soil or lint
which cancloths
burn or
andpapertowels,
cause discoloration.
__
Special Caution for Aluminum Foil and Aluminum Cooking
• Aluminum foil
__
_
Utensils
Use of aluminum foil will damage the cooktop. Do not use under any circumstances. _
Aluminum utensils
•
Since the melting point of aluminum is much lower than that of other metals, care must be taken when aluminum
pots or pans are used. Pans that boil dry may permanently damage cooktop by breaking, fusing to, or marking it.
Care and Cleaning
of Stainless
Steel (StainlessSteel
models
only)
Some models are equipped with stainless steel exterior parts. Special care and cleaning are required for maintaining the
appearance of stainless parts. Please refer to the table provided at the beginning of the General Care & Cleaning section
in this Use & Care Guide.
Hinge
e lever hook
Removing and Replacing the Oven Door
The door is heavy. For safe, temporary storage, lay the door flat with
SU
the inside of the door facing down.
To Remove Oven Door:
Lock engaged for door removal
Figure 1
HINGE SLOT - Door removed
from the oven
Figure 2
Hinge lever
1. Open the door to the fully opened position.
2. Pull up the lock located on both hinge supports and engage it in the hinge
levers hooks (Figure 1). You may have to apply a little downward pressure on
the door to pull the locks fully over the hinge lever hooks.
3. Grab the door by the sides and pull the bottom of the door up and toward you
to disengage the hinge supports. Keep pulling the bottom of the door toward
you while rotating the top of the door toward the range to completely disengage the hinge levers (Figure 2).
4. To clean oven door, follow the instructions provided in the General Care &
Cleaning table.
To Replace Oven Door:
1. Grab the door by the sides; place the hinge supports in the hinge slots. Open the
door to the fully opened position.
2. Disengage the lock from the hinge lever hooks on both sides (Figure 3).
Note: Make sure the hinge supports are fully engaged before unlocking the hinge
levers.
3. Close the oven door.
Special
Door Care Instructions
Most oven doors contain glass that can break.
Read the following recommendations:
1. Do not close the oven door until all the oven racks are fully in place.
2. Do not hit the glass with pots, pans, or any other object.
3. Scratching, hitting, jarring or stressing the glass may weaken its structure
causing an increased risk of breakage at a later time.
Lock in normal position
Figure 3
36
General Care & Cleaning
Changing
the Oven Light
Be sure the oven is unplugged
the oven light on during the self-cleaning
and all parts are COOL
cycle. High temperature
before
will reduce
replacing
the oven light bulb. Do not turn
lamp life.
The interior oven light will turn on automatically
when the oven door is opened.
The oven light may be turned on when the door is closed by using the oven light switch
located on the control
panel.
On a self clean oven the lamp is covered with a glass sMeld held in place by a wire holder.
THIS GLASS SHIELD MUST BE IN PLACE WHENEVER
THE OVEN IS IN USE.
To replace
CAUTION:
1.
2.
3.
4.
the light bulb:
BE SURE OVEN
IS COOL
i
Turn the power off at the main source.
Wear a leather-faced glove for protection against possible broken glass.
Replace bulb with a 40 watt appliance bulb only.
For self-cleaning
oven, press wire holder to one side to release glass shield,
change bulb and be sure to replace glass shield.
Before You Call
Solutions
to Common
Problems
Before you call for service,
review this list. It may save you time and expense.
that are not the result of defective workmanship
or materials in this appliance.
The list includes
common
occurrences
OCCURRENCE
POSSIBLE
Oven Control Beeps and
Displays any F code error
(example F11).
Electronic control has detected a fault condition. Press STOP to clear the display and stop the
beeping. Reprogram the oven. If a fault reoccurs, record the fault number. Press STOP and call
Sears or another qualified servicer.
d=O is displayed.
The door was left open and controls set for self-cleaning
Range not level.
Bad cooking results.
Place oven rack in center of oven. Place a level on the oven rack. Contact installing agent if rack and
cabinet cutout flooring are not level.
Kitchen cabinet misalignment may make oven appear to be not level. Be sure cabinets are square
and level. Contact cabinet maker to correct problem.
Entire oven does not
When the oven is first plugged in, or when the power supply to the oven has been interrupted, the
display will flash. The oven cannot be programmed until the clock is set.
Be sure electrical cord is securely connected into the electrical junction box.
Cord/plug is not installed and/or connected. Cord is not supplied with oven. Contact Sears or
another qualified servicer.
Service wiring not complete. Contact Sears or another qualified servicer.
Power outage. Check house lights to be sure. Call your local electric company.
Short in cord/plug. Replace cord/plug.
Controls are not set properly. See instructions under Setting Oven Controls to set the controls.
House fuse has blown or circuit breaker has tripped immediately following installation. House fuse
may not be fully engaged. Check fuse and screw or engage circuit breaker securely.
operate.
Surface
heat.
element does not
CAUSE/SOLUTION
cycle. Simply close the door.
No power to the appliance. Check steps under "Entire range or oven does not operate" in this
Before You Call checklist.
Too low heat setting. Turn control to a slightly higher setting until element comes on.
Incorrect control is on. Be sure to use correct control for the element to be used.
Surface element too hot or
not hot enough,
Incorrect control setting. Raise or lower setting until proper amount of heat is obtained. Dial
markings are an indicator of relative heat settings and will vary slightly.
Voltage is incorrect. Be sure appliance is properly connected to the power source specified in the
installation instructions. If you are not sure about this requirement call I=800=4=IVIY=HOME® for
service (See back cover).
Lightweight or warped pans were used. Be sure to use proper cookware. Use only flat bottom,
evenly balanced medium or heavyweight cookware. Heavy and medium weight pans heat evenly.
Because lightweight pans heat unevenly, foods may burn easily.
Surface element turns off
by itself,
This is normal. The element temperature rises gradually and evenly. As the temperature rises, the
element will glow red. To maintain the selected setting, the element will cycle ON and OFE The
heating element retains enough heat to provide a uniform and consistent heat during the OFF cycle.
Warmer zone element
does not turn on.
The warmer element will not glow when turned on. The indicator light will turn on when the
warmer element is on.
37
iiil
................
_;ii:/:ii_
...........
ii.......
Before You Call
Solutions
to Common
Problems
OCCURRENCE
POSSIBLE
Food not heating evenly.
Lightweight or warped pans were used. Be sure to use proper cookware. Use only flat bottom,
evenly balanced medium or heavyweight cookware. Heavy and medium weight pans heat evenly.
Because lightweight pans heat unevenly, foods may burn easily.
incorrect control setting. Raise or lower setting until proper amount of heat is obtained.
Scratches or abrasions
on cooktop surface.
Coarse particles such as salt or sand between cooktop and utensils can cause scratches. Be sure
cooktop surface and bottoms of utensils are clean before usage. Small scratches do not affect cooking
and will become less visible with time.
Cleaning materials not recommended for ceramic-glass cooktop have been used. See "Ceramic Glass
Cooktop Cleaning & Maintenance" section under General Care & Cleaning.
Cookware with rough bottom has been used. Use smooth, fiat-bottomed cookware.
Metalmarks.
Sliding or scraping of metal utensils on cooktop surface. Do not slide metal utensils on cooktop surface. Use
a ceramic-glass cooktop cleaning cream to remove the marks. See "Ceramic Glass Cooktop Cleaning &
Maintenance" section under General Care & Cleaning.
Brown
streaks
or specks.
CAUSE / SOLUTION
Boilovers are cooked onto surface. Use razor blade scraper to remove soil. See "Ceramic Glass Cooktop
Cleaning & Maintenance" section under General Care & Cleaning.
Areas of discoloration
with metallic sheen.
Mineral deposits from water and food. Remove using a ceramic glass cooktop cleaning cream.
Use cookware with clean, dry bottoms.
Oven light does not work.
Burned-out
the bulb.
Fan noise during cooking
operation,
A cooling fan may automatically turn on and off to cool internal parts. This is normal, and the fan
may continue to run even after oven has been turned OFF, but may also stop immediately and
then turn ON after a while.
Oven smokes excessively
during broiling.
Oven door is closed. Door should be open during broiling.
Meat too close to the broiler unit. Reposition the rack to provide more clearance between the meat
and the broiler. Preheat broil element for quick searing operation.
Meat not properly prepared. Remove excess fat from meat. Slash remaining fatty edges to prevent
curling, but do not cut into the lean.
Grid on broiler pan wrong-side up. Grease does not drain into broiler pan. Always place the grid on
the broiler pan with the ribs up and the slots down to allow grease to drip into the pan.
Broiler pan used without grid or grid cover with foil. DO NOT use the broiler pan without the grid or
cover the grid with foil.
Oven needs to be cleaned. Grease has built up on oven surfaces. Regular cleaning is necessary
when broiling frequently. Old grease or food spatters cause excessive smoking.
Poor baking
Many factors affect baking results. See Baking for hints, causes and corrections. See Adjusting
Oven Temperature.
results.
or loose bulb. Follow the instructions
under Changing
Oven Light to replace or tighten
Self=cleaning cycle does
not work.
Make sure the oven door is closed.
Controls not set properly. Follow instructions.
Self-cleaning cycle was interrupted. Follow steps under "Stopping or interrupting a Self-Cleaning
Cycle" in the Use & care Guide.
Soil not completely
removed after self=
Failure to
self-clean
scrubber.
Excessive
cleaning cycle is
completed.
Flames inside oven or
smoke from vent.
hand clean oven frame and door liner outside the oven door gasket before starting the
cycle. Hand clean burned on residue with a stiff nylon brush and water or a nylon
Do not clean the oven door gasket or it will be damaged.
spillovers in oven. Set the self-clean cycle for longer cleaning time.
Excessive spillovers in oven. This is normal, especially for high oven temperatures,
for large amounts of grease on bottom of oven. Wipe up excessive spillovers.
38
pie spillovers or
PROTECTION AGREEMENTS
Notes
Master Protection Agreements
Acuerdos
Congratulations
on making a smart purchase. Your new
Kenmore®product
is designed and manufactured for years of
Enhorabuena por haber hecho una compra inteligente. Su nuevo producto
Kenmore®esta diseSado y fabricado para brindarle aSos de funcionamiento
fiable. Pero, como cualquier producto, puede necesitar mantenimiento
preventivo o reparaciones peri6dicas. Es por eso que tener un Acuerdo maestro
de protecci6n podria ahorrarle dinero y molestias.
dependable
operation.
But like all products,
it may require
preventive maintenance or repair from time to time. That's when
having a Master Protection Agreement can save you money
and aggravation.
The Master Protection Agreement also helps extend the life of
your new product. Here's what the Agreement* includes:
[]
no functional
protection.
[]
Expert
the product warranty.
failure excluded
Piezas y mano de obra necesarias para contribuir a mantener el
funcionamiento adecuado de los productos utilizados en condiciones
normales de uso, no s61o en caso de defectos de los productos. Nuestra
cobertura va mucho mas alia que la garantia del producto.
No se
aplican deducibles ni exclusiones por fallas del funcionamiento: es decir,
verdadera protecci6n.
[]
Servicio t6cnico por expertos (mas de 10000 t6cnicos autorizados
de
Sears), Io cual significa que quien repare o realice el mantenimiento de su
producto sera un profesional de confianza.
[]
Servicio t6cnico a escala nacional y n_mero ilimitado de Ilamadas de
solicitud de servicio t6cnico: se puede poner en contacto con nosotros
cuantas veces Io desee y cuando Io desee.
[]
Garantia ,<sin sorpresas,,:
se reemplaza el producto cubierto por el
acuerdo si ocurren cuatro o mas fallas del producto en un periodo de 12
meses.
[]
Reemplazo del producto: en caso de que no se pueda reparar el
producto cubierto por el acuerdo.
[]
Revisi6n anual preventiva de mantenimiento del producto: puede
solicitarla en cualquier momento, sin costo alguno.
[]
Rapida asistencia telef6nica,
la cual denominamos Soluci6n rapida: es
decir, asistencia telef6nica a traves de cualquiera de nuestros
representantes de Sears, sobre cualquiera de nuestros productos. Piense
en nosotros como en un ,,manual parlante del usuario,,.
[]
Protecci6n contra fallas el6ctricas,
de la corriente electrica.
[]
$250 al aSo para cubrir cualquier posible deterioro de alimentos
haya tenido que desechar debido a una falla mecanica de cualquiera
nuestros refrigeradores o congeladores cubiertos por este acuerdo.
[]
Devoluci6n de gastos de alquiler de electrodom6sticos
si la reparaci6n
de su producto asegurado toma masque el tiempo prometido.
[]
10% de descuento
aplicable tanto a los costos del servicio de reparaci6n,
como de las piezas instaladas relacionadas que no hayan quedado
cubiertos por este acuerdo.
- real
service by a force of more than 10,000 authorized
Unlimited
service calls
and nationwide
you
service, as
often as you want us, whenever you want us.
[]
,<No-lemon,,
guarantee-
replacement
of your covered
product if four or more product failures occur within twelve
months.
[]
Product replacement
fixed.
[]
Annual
Preventive
if your covered product can't be
Maintenance
Check at your request -
no extra charge.
[]
Fast help by phone - we call it Rapid Resolution
-
phone support from a Sears representative
Think of us as a ,4alking owner's manual,,.
on all products.
[]
Power surge protection
power fluctuations.
damage due to
[]
$250 Food Loss
against electrical
Protection
annually for any food
spoilage that is the result of mechanical
covered refrigerator or freezer.
[]
Rental reimbursement
failure of any
if repair of your covered
product
takes longer than promised.
[]
10% discount
off the regular
price of any non-covered
repair service and related installed
parts.
Once you purchase the Agreement, a simple phone call is all
that it takes for you to schedule service. You can call anytime
day or night, or schedule a service appointment
online.
The Master Protection Agreement is a risk free purchase. If you
cancel for any reason during the product warranty period, we
will provide a full refund. Or, a prorated refund anytime after the
product warranty period expires. Purchase your Master
Protection
Agreement
today!
Some limitations and exclusions apply. For prices and
additional information in the U.S.A. call 1-800-827-6655.
* Coverage in Canada varies on some items. For full details
call Sears Canada at 1-800-361-6665.
Sears Installation Service
For Sears professional installation of home appliances, garage
door openers, water heaters, and other major home items, in
the U.S.A. or Canada call 1-800-4-MY-HOME
®.
la durabilidad
[]
No deductibles,
from coverage
Sears service technicians,
which means someone
can trust will be working on your product.
[]
El Acuerdo maestro de protecci6n tambien sirve para prolongar
de su nuevo producto. El acuerdo* incluye Io siguiente:
Parts and labor needed to help keep products operating
properly under normal use, not just defects. Our coverage
goes well beyond
maestros de proteccibn
contra daSos debidos a fluctuaciones
que
de
Una vez que haya realizado el pago de este acuerdo, bastara una simple
Ilamada telef6nica para concertar una visita de servicio. Puede Ilamar a
cualquier hora del dia o de la noche, o bien concertar una visita de servicio por
Internet.
La adquisici6n del Acuerdo maestro de protecci6n es una inversi6n exenta de
riesgos. Si por cualquier motivo decide cancelar dicho acuerdo durante el
periodo de garantia del producto, le haremos un reintegro total del valor. O bien
un importe proporcional si cancela el acuerdo en cualquier otro momento
posterior al vencimiento del periodo de garantia del producto, iAdquiera hoy
mismo su Acuerdo maestro de protecci6n!
Algunas
limitaciones
precios e informacibn
y exclusiones
adicional,
podrian aplicarse.
Ilame al 1-800-827-6655
Para solicitar
(en los EE.UU.).
* La cobertura en Canada varia en el caso de algunos articulos. Para
obtener detalles completos al respecto, Ilame al 1-800-361-6665 de Sears
de Canada.
Servicio de instalaci6n
de Sears
Para solicitar la instalacidn por profesionales
de Sears de electrodomesticos,
abridores de puertas de garaje, calentadores de agua y otros articulos de uso
prioritario en el hogar, Ilame al 1-800-4-MY-HOME
en los EE.UU. o CanadA.
39
Your Home
For expert troubleshooting
and home solutions
advice:
www.managemyhome.com
For repair - in your home - of all major brand appliances,
lawn and garden equipment, or heating and cooling systems,
no matter who made it, no matter who sold it!
For the replacement parts, accessories and
owner's manuals that you need to do-it-yourself.
For Sears professional installation of home appliances
and items like garage door openers and water heaters.
1-800-4-MY-HOME ® (1-800-469-4663)
Call anytime,
day or night (U.S.A. and Canada)
www.sears.com
www.sears.ca
Our Home
For repair of carry-in items like vacuums, lawn equipment,
and electronics, call anytime for the location of your nearest
Sears Parts & Repair Service Center
1-800-488-1222
(U.S.A.)
1-800-469-4663
www.sears.com
To purchase a protection
1-800-827-6655
www.sears.ca
agreement
on a product serviced
by Sears:
1-800-361-6665
(Canada)
(U.S.A.)
Para pedir servicio de reparacidn
a domicilio, y para ordenar piezas:
1-888-SU-HOGAR
® Registered
® Marca
Trademark
Registrada
/
TM
/
TM
Trademark
/
SM
Au Canada
pour service en frangais:
1-800-LE-FOYER
®
Service
(Canada)
Mc
(1-800-533-6937)
www.sears.ca
Mark of Sears
Marca de Fabrica / SM Marca de Servicio
Brands,
de Sears
uc Marque de commerce / MDMarque depos6e de Sears Brands, LLC
LLC
Brands,
LLC
© Sears Brands, LLC
Download PDF

advertising