User`s manual | Curtis LCD3213 Flat Panel Television User Manual

,
USER S MANUAL
Model: LCD3213
Please read this User Manual carefully to ensure the proper use of this product and
keep this manual for future reference
Contents
Safety and warnings
2-6
Introduction
7
Installation
8-14
Remote Control
15
Operation
16-21
Trouble Shooting
22
Wall Mounting Holes Spacing and Location
23
Base Stand Disassemble Illustration
23
SAFETY AND WARNINGS
IMPORTANT SAFETY INSTRUCTION
1.Read these safety instructions.
2.Keep these safety instructions.
3.Heed all warnings.
4.Follow all safety instructions.
5.Do not use this apparatus near water.
6.Clean only with dry cloth.
7.Do not block any ventilation openings. Install in accordance with the manufacturers
instructions.
8.Do not install near any heat sources such as radiators,stoves, or other apparatus
(including amplifiers)that produce heat.
9.Protect the power cord from being walked on or pinched particularly at power outlets, and the
point where they exit from the apparatus.
10.Only use attachments/accessories specified by the manufacturer.
11.Unplug this apparatus during lightning storms or when unused for long periods of time.
12.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as the power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture ,
does not operate n ormally, or has been dropped.
13.Apparatus must not be exposed to dripping or splashing and no objects filled with liquids, such
as vases, should be placed on the apparatus.
-2-
SAFETY AND WARNINGS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN!
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK).NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The symbol indicates that dangerous voltages constituting a risk of electric
shock are present within this unit.
The symbol indicates that there are important operating and maintenance
instructions in the literature accompanying this unit.
WARNING:
To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
-3-
SAFETY AND WARNINGS
Warning
High voltages are used in the operation of this television receiver.
Do not remove the cabinet back from your set. Refer servicing to
qualified service personnel.
Warning
To prevent fire or electrical shock hazard, do not expose the
television receiver to rain or moisture.
Warning
Do not drop or push objects into the television cabinet slots or
openings. Never spill any kind of liquid on the television receiver.
Caution
Do not block the ventilation holes in the back cover. Adequate
ventilation is essential to prevent failure of electrical components.
Caution
Do not trap the power supply cord under the television receiver.
-4-
SAFETY AND WARNINGS
Caution
Never stand on, lean on, or suddenly push the television or its stand.
You should pay special attention to children. Serious injury may result
if it falls.
Caution
Do not place your television on an unstable cart, stand, shelf or table.
Serious injury to an individual , and damage to the television, may
result if it falls.
Caution
When the television receiver is not used for an extended period of
time, it is advisable to disconnect the AC power cord from the AC
outlet.
Caution
Avoid exposing the television receiver to direct sunlight and other
sources of heat. Do not stand the television receiver directly on other
products which give off heat, e.g. video cassette players and audio
amplifiers. Do not place naked flame sources, such as lighted candles
on the television.
Caution
If the television is to be built into a compartment or similar enclosure,
the minimum distances must be maintained. Heat build-up can reduce
the service life of your television, and can also be dangerous.
Dim:515*320mm(
-5-
SAFETY AND WARNINGS
Thank you very much for purchasing this TV. To enjoy your product from the very beginning, read this
manual carefully and keep it handy for easy reference.
INSTALLATION
Locate the TV in the room where light does not strike the screen directly.
Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is
recommended for comfortable viewing.
Allow enough space between the TV and the wall to permit ventilation.
Avoid extremely warm locations to prevent possible damage to the cabinet or premature component
failure.
This TV can be connected to AC 100-240 Volts. 50/60 Hz. Never connect to a DC supply or any other
power supply.
Do not cover the ventilation openings when using theTV.
CAUTION
Never tamper with any components inside the TV, or any other adjustment controls not mentioned in this
manual. All LCD-TVs are high voltage instruments. When you clean up dust or water drops on the LCD
PANEL or CABINET, the power cord should be pulled out from the receptacle, then wipe the TV with
a dry soft cloth. During thunder and lighting, unplug the power cord and antenna cord to prevent damage
to your TV.
All repairs to this TV should only be performed by qualified TV service personnel.
Earthing connection--- The apparatus shall be connected to MAINS socket outlet with a protective
earthing connection
MAINS plug or appliance coupler of the apparatus is used as disconnect device, it should remains
readily operable
Warning: Change or modifications to this unit not expressly by the part responsible for
compliance could void the user 's authority to operate the Equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designcd to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected .
-Consult the dealer or an experienced radio TV technician for help.
Shield cables must be used with this unit to ensure compliance with the Class B FCC limits.
-6-
INTRODUCTION
Main features
Used as Television, display terminal,PC display
High luminance,wide viewing angle
Can store AIR 2-69,HRC 1-125,IRC 1-125,CATV 2-125 TV programs
Dual HDMI interface
5 BTSC
Main parameter
Vie wing Picture Size(diagonal)
Resolution
Aspect Ratio
TV System
Video Signal System
Receiving Channel
Inpu t Power Voltage
Po we r consumption
Audio Output Powe r
Signal Input
Horizontal definition
THD 7%
TV line
32
1366x768
16 : 9
NTSC-M, NTSC-N
NTSC/PAL/SECAM
AIR 2-69
HRC 1-125
IRC 1-125
CATV 2-125
AC 100 V-240 V 50/60Hz
170 W
2x 8W
Analog RGB(VGA)x1
High-Definition Multimedia Interface (HDMI)x2
Rear Composite Video Input x2
Rear S-Video x1
Audio Inputx4
YCb (Pb )Cr (P r)x1
Rear Composite Video Output x1
Audio Outputx1
Side Composite Video Input x1
Side S-Video x1
Side HEAD PHONE x1
Composite Video input >=350
S- Video Input
>=400
Y Cb(Pb ) Cr(Pr)
>=400
-7-
INSTALLATION
Accessories
AC Power Cord.........................
1
Infrared Remote Control......
1
User s Manual ........................
1
Battery(AAA)..........................
2
HDMI cable is no included.
Front panel
3
4
2
1
30
30
MUTE
POWER
NICAM
1
2
3
RECALL
4
5
6
7
8
9
0
TV MENU
INPUT
ENTER
DVB MENU
EXIT
SOUND
+
+
VOL
CH
PIC
_
_
SLEEP
ASPECT
SOURCE
DISPLAY
TEXT
INFO
FAV
EPG
REVEAL
HOLD
LIST
INDEX
SUBPAGE
SIZE
AUDIO
SUBTITLE
1:
2:
Remote control sensor.
Indicator LED: GREEN
POWER ON.
RED
STAND BY.
3: Control Panel (see next page).
4: Power: Press this button to turn the unit
ON from STANDBY mode.
Press it again to turn the set back to
STANDBY.
5: when TV is in standby mode, press CH + or
CH
button in TV control panel will power
on the TV.
-8-
INSTALLATION
CONTROL PANEL
SOURCE
MENU
CH+
CHVOL+
VOL-
1
SOURCE
Display the input source menu.
2 MENU
To display main MENU.
3 CH+/CHIn TV mode press CH+ or CH- to change the channel up and down.
In MENU,press CH+ or CH- to select items in MENU.
when TV is in standby mode, press CH+ or CH- button in TV control panel will power
on the TV.
4 VOL+/VOLAdjust sound level.
In MENU,adjust the item that you selected.
AV3 INPUT
REAR AV Connection
R
L
VIDEO
R
L
VIDEO
AV OUTPUT
/
All the terminals are(from left to right):
ANTENNA,AV3 INPUT&AV OUTPUT ,AUDIO INPUT, YPbPr, CVBS,S-VIDEO, VGA ,
HDMI,AC POWER SOCKET
Note: 1.CVBS and S-VIDEO share one audio channel.
2. When HDMI1 port get DVI signal, the PC Audio channel is changed to
receive the audio for HDMI1 port
3. When HDMI2 port get DVI signal, the YPbPr Audio channel is changed
to receive the audio for HDMI2 port.
4.AV OUTPUT :
when the source are AV1,AV3, AV2(side),S-VIDEO1, S-VIDEO2(side)TV,the AV OUT
Channel reproduce the input signals accordingly
when the source are YPb Pr, DVD(optional)HDMI1/2 VGA, the AV OUT channel
Reproduce the TV signal .
-9-
INSTALLATION
ANTENNA
Note:
Aerial connections:IEC(female).
Input impendance:75 unbalanced.
-10-
INSTALLATION
PC
STEPS:
Be sure both the TV and computer are set to Power off.
1.Connect VGA and audio cable.
2.Connect the power cord.
3.Power on the TV, switch to PC mode.
4.Power on the PC.
AV3 INPUT
This sequence is very important.
R
L
VIDEO
R
L
VIDEO
AV OUTPUT
/
-11-
INSTALLATION
PC
PRESET MODE(recommended resolution is 1024*768@60Hz)
RESOLUTION
V.Freq.(Hz)
H.Freq.(KHz)
1
720*400
70
31.47
2
640*480
60
31.47
3
640*480
75
37.50
4
800*600
60
37.88
5
800*600
75
46.88
6
1024*768
60
48.36
8
1024*768
75
60.02
9
1280*1024
60
63.98
-12-
INSTALLATION
AV EQUIPMENT
This TV provides three inputs for Composite (A/V), two inputs for S-Video, and one input for
Component (Y/Pb/Pr) .
You can use the input terminals on TV set rear as follows.
with S-video
term inal
with
terminal
R
To audio
Output
VIDEO EQUIPMENT
W
W
VIDEO EQUIPMENT
Y
To video
Output
R
To S-VIDEO
output
To audio outputs
W
R
Y
AV3 INPUT
W
R
L
VIDEO
R
L
VIDEO
R
AV OUTPUT
/
W
R
Y
G
R
B
Y
R
W
From video
output
B
R
with
terminal
To au dio
outputs
W
G
R
W
From audio
output
Y
R
HDMI cable is
no included.
R Pr
G Y
B Pb
VIDEO EQUIPMENT with YPbPr
HDMI
VIDEO EQUIPMENT
Y
VIDEO RECORDER
To video
output
Y Yellow (video)
W White(audio L)
R Red(audio R)
HEADPHONE
S-VIDEO2
VIDEO
AV2
L
R
It can be connected to the following appliances: VCR, multi disc player, DVD, camcorder, video game
or stereo system, etc.....
YPbPr can support these video formats:480i,576i,480p,576p,720p,1080i.
Note: AV2 and S-Video2 share the audio input channel.
-13-
INSTALLATION
Insert Batteries Into the Remote Control
1. Remove the battery cover.
2. Place 2 AAA batteries (included) making sure the polarity (+ or -) of the batteries matches the polarity
marks inside the unit.
3. Mount the battery cover.
Replace the batteries when the TV set begins to show the following symptoms:
Operation is unsteady or erratic. Sometimes the TV set does not function with Remote Control Unit.
Remark:
1) Alkaline Battery Recommended.
2) Remove batteries when they are exhausted or if the remote control is not to be used for long time.
-14-
REMOTE CONTROL
REMOTE CONTROL
MUTE
POWER
1
11
MTS/SAP
1
3
2
12
2
RECALL
4
5
6
7
8
9
MENU
13
0
SOURCE
14
3
15
ENTER
4
16
5
TV DISPLAY
EXIT
S.M
+
6
CH
VOL
_
18
_
P.M
7
17
+
ASPECT
AUTO
19
8
SLEEP
V-CHIP
CC
TV
AV1
AV2
9
20
10
21
AV3
SV1
SV2
YPbPr
PC
HDMI1
HDMI2
TV Source
22
23
NOTE:
4 coloured knobs on the bottom
of the remote control is optional for
other version
1: POWER
To set the TV standby or on.
2: NUMBER KEY :
For direct access to program. For
a 2 (3) digit program number,
The second (third) digit must be
entered before the dash disappears.
The number, the name (and the sound
mode, in analogue mode) are displayed
for a few seconds.
3: MENU
To display TV menu or to return to the
previous menu.
4: CURSOR
To move within the menu.
5: EXIT
Used to exit menu.
6: VOL+/To adjust sound level.
7: P.M
To switch picture mode.
8: AUTO
Auto adjust in PC mode.
9: SLEEP
Set time to turn off the TV.
10: V-CHIP
Setting the V-CHIP level control.
11: MUTE
To disable or enable the sound.
12: MTS/SAP
Switch the sound stereo, SAP and mono.
13: RECALL
To access the previously viewed
program.
14: SOURCE
Select EXT sources.
15: ENTER
Confirms selection.
16: TV DISPLAY
Displays/removes the program
Information
17: S.M
To switch sound mode.
18: CH+/CHTo access the next or previous
Program.
19: ASPECT
To change picture aspect .
20: CC
Switch the close caption mode (cc1Cc4,Text1-text4)
21: TV/AV/SV/HDMI/YPbPr/PC
Hot keys directly go to appointed source.
22. TV Source
Switch TV Source between air/cable.
23. Color Keys: Reserved keys.
-15-
OPERATION
1. PICTURE MENU
The first item of the MENU is picture menu.
You can adjust picture effects here, such as contrast, brightness, etc.
Press
to move, press
to adjust.
CONTRAST
60
BR IGHTNESS
47
TINT
50
COLOR
50
SHARPNESS
26
COLOR TEMP .
NORMAL
ASPECT.
16:9
Note:
There are three colour temperature modes which can be selected : NORMAL, WARM, COOL.
2.SOUND MENU
The second item of the MENU is the sound menu.
You can adjust the sound here.
Press
to move, press
to adjust.
SOUND
BASS
57
TREBLE
BALANCE
AUTO VOLUME
-16-
53
50
OFF
OPERATION
3.FUNCTION MENU
The third item of the MENU is the function menu.
You can adjust the settings below:
1).3D NR: adjust this item , you can see the noise reduction effect in the picture only for TV
and AV source.
2).CLOSED CAPTION: switch close caption mode..
3).PARENT CONTROL: Enter V-chip control.
4).FACTORY DEFAULT: Reset all the settings to default value.
FUNCTION
3D NR
OFF
CLOSED CAPTION
OFF
PARENT CONTROL
FACTORY DEFAULT
1.Parent control: put in the password, it will go into V-chip coutrol menu. Factory default
password is 6666.
FUNCTION
CHANGE PASSWORD
V-CHIP
OFF
TV-RATING
MPAA-RATING
NONE
ENGLISH-RATING
E
FRENCH-RATING
E
1).Change password:can change the current parent control password to the new
password,you need to input the new password twice before it can be changed successfully.
2).V-chip:switch the V-chip ON or OFF.
3).TV-rating:it would goto TV-rating control menu as below.
-17-
OPERATION
ALL
FUNCTION
V
S
L
D
B
B
B
B
B
B
B
B
B
B
TV-Y
U
TV-Y7
B
TV-G
B
TV-PG
TV-14
FV
B
B
B
B
B
TV-MA
ENTER KEY : BLOCK OR UNBLOCK
Rating
Content
D
V
FV
S
L
(Sexually
(Fantasy (Violence) (Sexual
(Adult
violence)
situation) language) suggestive
dialog)
Content
TV-Y (All children)
Suggested
age
TV-Y7(Direct to
order children)
X
TV-G(General
audience)
TV-PG(Parental
Guidance suggested)
X
X
X
X
TV-14(Parents strongly
cautioned)
X
X
X
X
X
X
X
TV-MA(Mature
audience only)
And use ENTER.key to switch block unblock V-chip teature.
4).Movie-rating:switch the movie-rating control level; none,G,PG, PG-13,R,NC-17,X.
Rating
Description
G
PG
Age
PG-13
R
NC-17
General audiences, All ages admitted
Parental guidance suggested. Some material may not be
suitable for children.
Parents strongly cautioned. Some material .may be
inappropriate for children under 13.
Restrict. Under 17 requires accompanying parent or adult
guardian (age varies in some jurisdictions).
No one 17 and under admitted.
X is an order rating that is unified with NC-17 but may be
encoded in the data of order movies.
-18-
OPERATION
5).English-rating:switch the english-rating control level:E,C,C8+,G,PG,14+,18+.
Rating
E
C
C8+
Age
G
PG
14+
18+
Description
Exempt: Includes news, sports, documents and other information
programming: talk shows, music videos, and variety programming.
Children: Intended for younger children under the age of 8 years. Pays
careful attention to themes that could threaten their sense of security
and well-being.
Children over 8 years old: Contains no portrayal of violence as the
preferred, acceptable, or only way to resolve conflict; nor encourage
children to imitate dangerous acts which they may see on the screen .
General: Considered acceptable for all age groups, Appropriate viewing
for the entire family, contains very little violence, physical, verbal or
emotional.
Parental Guidance: Intended for a general audience, but may not be
suitable for younger children(under the age of 8) because it could contain
controversial themes or issues.
Over 14 Years: Could contain themes where violence is one of the
dominant elements of the storyline But it must be integral to the develo
pment of plot or character. Language usage could be profane and nudity ,
present within the context of theme.
Adults: Intended for viewers 18 years and older and might contain
depictions of violence,which while related to the development of plot,
character or themes, are intended for adult viewing.Could contain
graphic language and portrayals of secretary and nudity.
6).French-rating:switch the French-rating control level: E, G,8ANS+,13 ANS+,16ANS+
18ANS+.
Rating
Description
E
G
Exempt programming
General :All ages and children, contains minimal direct violence, but may
be integrated into the plot in a humorous or unrealistic manner .
8ans+ General but inadvisable for young children :May be viewed by a wide
public audience, but could contain scenes disturbing to children under 8
who cannot distinguish between imaginary and real situations.
Age
Recommended for viewing with paren.
13ans+ Over 13 years: Could contain scenes of frequent violent scenes and in
tense violence.
16ans+ Over 16 years: Could contain frequent violent scenes and violence.
18ans+ Over 18 years: Only for adult viewing. Could contain frequent violent
scenes and extreme violence.
-19-
OPERATION
4.OSD MENU
The fourth item of the menu is the OSD menu
OSD
OSD LANGUAGE
OSD H-POSITION
OSD V-POSITION
ENGLISH
50
50
OSD TIMEONT
26
OSD TRANSPARENCY
26
5.CHANNEL MENU
The fifth item of the MENU is channel menu(only use in TV source).
You can complete channel search and setting here.
CHANNEL
MONO
MTS
AUTO SCAN
FINE TUNE
ADD ERASE
SOURCE
1). AUTO SCAN
Search all the channels automatically.
2). FINE TUNE
Fine tune the current program.
3) .ADD ERASE
4). SOURCE
Select the TV source to auto scan the TV program.
-20-
128
OFF
CATV
OPERATION
In PC Mode, there are two items that are different with other sources.
1. PC MENU
You can adjust picture here, such as contrast, brightness.
Press
to move, press
to adjust.
PC
CONTRAST
60
BR IGHTNESS
47
COLOR MODE
NORMAL
ASPECT
1.colour mode:only four modes could be selected: normal,warm,cool,user.
2.Press
to move,press
to adjust RGB value according to your personal taste under
user mode.
PC
COLOR TEMP.
USER
USER-R
50
USER-G
50
USER-B
50
2. FUNCTION MENU
1).H-POSITION:adjust the horizontal position of the screen.
2).V-POSITION:adjust the vertical position of the screen.
3).CLOCK: fine tune the screen width.
4).PHASE: fine tune the phase of the screen.
5).AUTO: auto adjust to fit the screen.
FUNCTION
H-POSITION
60
V-POSITION
47
CLOCK
47
PHASE
47
AUTO
Rest of the set up , pls refer to previous introductions.
-21-
Trouble shooting
Trouble phenomenon Symptom
Inspection Check
Picture
Audio
Snow
Noise
antenna position, direction
or connection
Ghost
Normal audio
antenna position, direction
or connection
Interference
Noise
electronic equipment,car/
motorcycle,fluorescent light
Mute
Volume(check if mute is
activated or if the audio system
connections are not correct)
Normal Picture
Power cord is not inserted
Power switch is not ON
Contrast and brightness/volume
setup
Press standby key on the remote
control for inspecting
No picture
Mute
No colour
Normal audio
Colour control
Picture
breaking up
Normal audio
or weak
retune channel
No colour
Noise
TVsystem
The LCDTV panel is built with very high precision technology giving you fine picture details
in vibrant color. Occasionally, a few non-active pixels may appear on the screen as a fixed
point of red, green, blue, black or white. Please note this does not affect the performance of
the product.
-22-
Wall Mounting Holes Spacing and Location
200 mm
400 mm
Base Stand Disassemble Illustration
How to remove the stand from the TV
1.Use the screwdriver to remove the screws
from the screw location.
1.Remove the base stand from the
Main body.
Main accessories
Main body
Base Stand
-23-
8 Screws
Download PDF

advertising