Curtis LCDVD193A Flat Panel Television User Manual

INSTRUCTION MANUAL
Before using the TV, please read this manual thoroughly,
and retain it for future reference.
Model:LCDVD193A
CONTENTS
1
SAFETY
PRECAUTION
1
2
IMPORTANT
SAFETY
INSTRUCTION
2
3
MAINTENANCE
2
4
ACCESSORIES
3
5
GETTING
STARTED
3
6
CONTROL
REFERENCE
GUIDE
Remote Control
Front Frame
Back Frame
Side Panel
7
CONNECTIONS
Antenna Connection
S-Video Connection
AV Connection
Y Pb Pr Connection
HDMI Connection
VGA Connection
Headphone Connection
Power Cord Connection
8
WALL MOUNT
INSTALLATION
9
INITIAL SETUP
Putting The Unit On A Proper Place
Source Selection
Turning The Unit On For The First Time
12
12
12
TV SETUP
Picture Menu
Audio Menu
Time Menu
Setup Menu
Parental Menu
TV Menu
Zoom Function
14
16
18
19
22
25
26
10
4
6
6
7
8
8
8
9
9
10
10
10
11
CONTENTS
11
DISC
FORMATS
12
CD / DVD
OPERATION
Basic Operations
Special Functions
Mp3 / JPEG Playback
28
31
33
13
CUSTOMIZING
THE DVD
FUNCTION
SETTINGS
DVD Function General Setup
System Setup
Language Setup
Audio Setup
Digital Setup
34
34
36
38
39
14
DISPLAY
MODE
PC Formats
Video Formats
40
41
15
SPECIFICATION
16
TROUBLESHOOTING
GUIDE
27
42
DVD Symptom
TV Symptom
43
44
SAFETY CLASS :This is an IEC safety class I product
and it must be grounded for safety.
SAFETY PRECAUTION
* CAUTION MARKING WAS LOCATED AT BOTTOM
PLACEMENT INFORMATION
ENCLOSURE OF THE APPARATUS.
• Do not use this unit in places that are extremely
hot, cold, dusty or humid.
• Do not restrict the airflow of this unit by placing it
somewhere with poor airflow, by covering it with
a cloth, by placing it on bedding or carpeting.
SAFETY INFORMATION
WARNING : TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead symbol,
within an equilateral triangle,is intended to
alert the user to the presence of uninsulated
“dangerous voltage”within the product’s enclosure
that may beof sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the appliance.
• When connecting or disconnecting the AC power
cord, grip the plug and not the cord itself. Pulling
the cord may damage it and create a hazard.
• When you are not going to use the unit for a long
period of time, disconnect the AC power cord.
CONDENSATION INFORMATION
• When left in a heated room where it is warm and
damp, water droplets or condensation may form
inside the equipment. When there is condensation
inside the unit, the unit may not function normally.
Let the unit stand for 1-2 hours before turning the
power on or gradually heat the room and let the
unit dry before use.
RATING PLATE LOCATION
The rating plate is located on the rear of the unit.
FCC STATEMENTS
CAUTION
This product
NOTE: This unit has been tested and found to comply
with the limits for a Class B digital device, pursuant
INVISIBLE LASER RADIATION WHEN
contains a low
OPEN AND INTERLOCKS DEFEATED. power laser device. to Part 15 of the FCC Rules. These limits are designed
AVOID EXPOSURE TO BEAM
to provide reasonable protection against harmful
CLASS 1 LASER interference in a residential installation.
PRODUCT
This unit generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
CAUTION
interference to radio communication. However, there
• DANGER OF EXPLOSION IF BATTERY IS
is no guarantee that interference will not occur in a
INCORRECTLY REPLACED. REPLACE ONLY
particular installation. If this unit does cause harmful
WITH THE SAME OR EQUIVALENT TYPE.
interference to radio or television reception, which
can be determined by turning the unit off and on, the
• USE OF CONTROLS OR ADJUSTMENTS OR
user is encouraged to try to correct the interference
PERFORMANCE OF PROCEDURES OTHER
by one or more of the following measures:
THAN THOSE SPECIFIED MAY RESULT IN
- Reorient or relocate the receiving antenna.
HAZARDOUS RADIATION EXPOSURE.
- Increase the separation between the unit and
receiver.
- Connect the unit into an outlet on a circuit different
from that to which the receiver is connected.
WARNING:
- Consult the dealer or an experienced radio/TV
• TO REDUCE THE RISK OF FIRE OR ELECTRIC
technician for help.
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
T O REVENT FIRE OR SHOC K H AZARD, DO NOT
WARNING:
• EXPOSE THIS UNIT TO RAIN OR MOISTURE. DO
NOT PLACE OBJECTS FILLED WITH LIQUIDS ON
Changes or modifications to this unit
OR NEAR TH IS UNIT.
not expressly approved by the party responsible
• SHOULD ANY TROUBLE OCCUR, DISCONNECT
for compliance could void the user authority
THE AC POWER CORD AND REFER SERVICING
to operate the unit.
TO A QUALIFIED TECHNICIAN.
1
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with a dr y cloth.
7) Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
8) Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (Including amplifiers) that
produce heat.
9) Do not defect the safety purpose of the
polarized or grounding-type plug.
A polarized plug has two blades with one
wider than the other.
A grounding type plug has two blades
and a third grounding prong.
The wide blade or the third prong is
provided for your safety.
If the provided plug does not fit into your
wall outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.
11) Only use attachments / accessories specified
by the manufacturer.
12) Use only with the cart, stand,
tripod, bracket, or table
specified by the manufacturer,
or sold with the apparatus.
When a cart is used, use caution when
moving the cart / apparatus combination to
avoid injur y from tip-over.
13) Unplug this apparatus during lightning
Storms or when unused for long periods of
time.
14) Refer all ser vicing to qualified ser vice
personnel. Ser vicing is required when the
apparatus has been damaged in any way,
such as the power cord or plug is damaged,
liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
15) To prevent electric shock , ensure the grounding
pin on the AC cord power plug is securely
connected.
MAINTENANCE
CLEANING THE DISC
A defective or soiled disc inserted into the unit can cause sound to drop out during
playback .
Handle the disc by holding its inner and outer edges.
• Do NOT touch the surface of the unlabeled side of the disc.
• Do NOT stick paper or tape on the surface.
• Do NOT expose the disc to direct sunlight or excessive heat.
• NEVER use solvents such as benzine or alcohol to clean the disc.
• Clean the disc before playback . Wipe the disc from the center
outward with a cleaning cloth.
• Do NOT use irregular shaped discs
(example : heart shaped, octagonal, etc.).
They may cause malfunctions.
CLEANING THE UNIT
• Be sure to turn the unit off and disconnect the AC power cord before maintaining the unit.
• Wipe the unit with a dr y soft cloth. If the surfaces are extremely dirty,
wipe clean with a cloth that has been dipped in a weak soap-and-water solution and
wrung out thoroughly. Wipe with a dr y cloth.
• Never use alcohol, benzine, thinner, cleaning fluid or other chemicals. Do NOT use compressed
air to remove dust.
IMPORTANT NOTE
Before transporting the unit, remove the disc from the disc compartment.
2
ACCESSORIES
Please check and identify the supplied accessories.
Remote control ...................................................................................................... ................... . x 1
Batter y(AA) ............................................................................................................ . ............. .. . x 2
Power Cord ............................................................................................................................ . . . . x 1
Warranty Card ........................................................................................................................... . . x 1
Instruction Manual ................................................................................................................. . . x 1
GETTING STARTED
USING THE REMOTE CONTROL
• Point the remote control at the remote sensor located on the unit.
• When there is a strong ambient light source, the performance of the infrared remote sensor
may be degraded, causing unreliable operation.
• The recommended effective distance for remote operation is about 16 feet (5 meters).
TO INSTALL THE BATTERIES
1. Open the batter y door.
2. Insert 2 "AA" batteries
.
BATTERY REPLACEMENT
When the batteries become weak , the operating distance of the remote control is greatly
reduced and you will need to replace the batteries.
CAUTION : Danger of explosion if batter y is incorrectly replaced.
NOTES
• If the remote control is not going to be used for a long time, remove the batteries to avoid
damage caused by batter y leakage corrosion.
• Do not mix old and new batteries. Do not mix ALKALINE, standard (CARBON-ZINC) or
rechargeable (NICKEL-CADMIUM) batteries.
• Always remove batteries as soon as they become weak .
• Weak batteries can leak and severely damage the remote control.
WARNING :
• Do not dispose batteries in a fire . Batteries may explode or leak .
• Batteries shall not be exposed to excessive heat such as sunshine , fire or the like .
3
CONTROL REFERENCE GUIDE
TV FUNCTION BUTTONS
REMOTE CONTROL
DISPLAY
DISPLAY
4
4
7
0
2
3
5
6
8
9
RECALL/-/--
MUTE
MUTE
8
8
9
9
MTS
SUB.
GUIDE
FAV+
ANGLE
?
SLOW
FAVAUDIO
17
EXIT
D.SETUP
D.SETUP
18
ZOOM
CCD
ZOOM
EPG
19
A -B
20
REPEAT
PROG
13
MENU
ANGLE
16
6
13
12
CHCH-
CH.LIST
PROG
7
SLEEP
CH+
CH+
0
VOLVOL-
14
15
7
10
VOL+
VOL+
LANG
FAV
3
S.MODE
SMODE
ENTER
11
3
P.MODE
PMODE
5
11
2
TV/AV
TV/AV
1
1
2
A-B
INTRO
SUBTITLE TITLE
D.DISP
GOTO
D.MENU TITLE
D.DISP
GOTO
1. STANDBY / ON Button
Press to turn ON the unit or put it in STANDBY (OFF)
mode.
2. Display Button
Press to Display the source and channel information.
3. TV / AV Button
Press to switch the source input.
4. Number (0 - 9) Buttons
Press to select specific channels.
5. RECALL Button
Press to switch repeatedly between the last two
channels displayed.
6. MUTE Button
Press to turn the sound on / off.
7. P. MODE Button
Press to select from preset screen display settings to
match the type of show you are watching .
8. S. MODE Button
Press to select from preset sound settings to
match the type of show you are watching .
9. SLEEP Button
Press to set the SLEEP timer.
The unit will remain on for the time that is set,
and will automatically shut off after wards.
10. MTS (Multi Channel Television Sound) Button
Press to select between MONO sound,
STEREO sound and Secondar y Audio Program (SAP).
11. VOLUME ( / ) Buttons
Press to adjust the volume level.
12. CURSOR ( , , , ) Buttons
Press to highlight selections on a menu screen and
adjust certain settings.
ENTER Button
Press to confirm selections on a menu screen.
13. CH ANNEL ( / ) Buttons
Press to change the TV channels .
14. FAVORITE Button
Press to display a list of Favorite TV Channels
you have added.
15. GUIDE Button (EPG)
Press to view scheduled programming for the current
channel viewed.
16. CHANNEL LIST Button
Press to display a list of channels saved in the TV
tuner memor y. Use the
, , ,
buttons to
highlight and make channel selection.
17. MENU Button
Press to display the on - screen TV menu .
18. EXIT Button
Press to exit the TV SETUP menu and return directly
to normal viewing .
19. CCD Button
Press to activate the Closed Captioning feature .
This function only works on programs broadcasted
with captions .
20 . ZOOM Button
Press to set size of LCD display.
4
CONTROL REFERENCE GUIDE
DVD FUNCTION BUTTONS
REMOTE CONTROL
2
DISPLAY
DISPLAY
TV/AV
TV/AV
3
1
4
7
0
21
2
3
5
6
8
9
MUTE
MUTE
RECALL/-/--
P.MODE
PMODE
7
S.MODE
SMODE
8
SLEEP
9
MTS
22
VOL+
VOL+
CH+
CH+
0
ENTER
CHCH-
VOLVOL-
29
LANG
FAV
SUB.
GUIDE
23
?
CH.LIST
25
33
MENU
ANGLE
24
26
27
28
FAV+
ANGLE
SLOW
FAVAUDIO
PROG
D.LANG
PROG
INTRO
EXIT
D.SETUP
D.SETUP
ZOOM
CCD
ZOOM
EPG
REPEAT
A-B
A-B
SUBTITLE TITLE
D.DISP
GOTO
D.MENU TITLE
D.DISP
GOTO
37
34
38
31
30
32
36
40
35
39
21. - / – Button
Press to enter the title, chapter and track selection.
22.
Button
Press to eject a disc.
Button
23.
Press to start and resume playback of a disc.
Button
Press to pause playback and single frame advance on
DVDs
Button
24.
Press to stop playing a disc. Press it twice, the unit's
memor y will be cleared.
25.
Button
Press to Fast reverse playback .
26.
Button
Press to Fast for ward playback .
Button
27. PREV
Press to select the previous titl e , chapter or track on
a disc.
Button
28. NEXT
Press to select the next title, chapter or track on a disc.
29. ANGLE Button
Press to switch the camera angle of the video
presentation when scenes with multiple camera
angles are recorded on a DVD.
30. SLOW Button
Press to perform slow for ward playback of a DVD.
31. DVD SETUP Button
P ress to enter and exit the SETUP menu of the DVD.
32. ZOOM Button
Press to zoom in or zoom out a image.
33. PROGRAM Button
Press to enter into the favorite list to program the
contents in a disc.
34. DVD LANGUAGE Button
Press to select one of the sound languages
programmed on a DVD.
35. REPEAT Button
Press to repeat a chapter or title of a DVD.
Press to repeat a single track or whole CD.
36 . A-B Button
Press to perform point-to-point repeat playback on
a DVD or CD.
37. S UBTITLE Button
Press to select one of the subtitle languages
programmed on a DVD.
38. TITLE Button
Press to show title menu.
39. D VD DISPLAY Button
Press to change disc status information displayed
on the screen .
40. GOTO Button
Press to skip directly to a specific location on a
DVD/CD.
5
CONTROL REFERENCE GUIDE
FRONT VIEW
1. Color LCD Screen
2 . Remote Sensor
Do not block this sensor or the
remote control will not work .
3. Standby Indicator
Indicates whether the unit is ON
or in STANDBY (OFF) mode.
Light in red : The unit is in STANDBY.
Light in green : The unit is turned ON.
4 . Speakers
14
2
3
4
BACK VIEW
1 . TV ANTENNA Terminal
2 . HEAD PHONE Jack
3. AUDIO IN Jack (Right)
4. AUDIO IN Jack (Left)
5. VIDEO IN Jack
6. S-VIDEO Jack
7. Y / PB / PR Jacks
8 . PC AUDIO IN Jack
9. VGA IN Jack
10. HDMI IN Jack
11. AC IN (120V)
12. POWER SWITCH
1 2 3 4 5 6
7
8
9
10
11
12
ON
OFF
6
CONTROL REFERENCE GUIDE
SIDE VIEW
1
TV / AV
LABEL S IDE
1
MIRROR S IDE
2
Menu
P
P
5
6
V
7
8
Power
9
V
1. Disc Door
Insert discs to disc door
3
4
1.
Button
Press to eject a disc.
2.
Button
Note: When inserting a disc, please
Press to start or resume playback of a disc .
take note of the indication of direction 3. TV / AV Button
around the disc door for operation.
Select A TV, AV, S-VIDEO , YPbPr, HDMI,
(right direction: put the label side of
PC, or DVD.
the disc against yourself )
4. Menu Button
.
Press to display the on-screen TV menu.
5. P Button
Press to change the TV channels and up
highlight selections on the menu screen.
6. P Button
Press to change the TV channels and down
highlight selections on the menu screen.
7. V Button
Press to adjust the volume up.
8. V Button
Press to adjust the volume down.
9. Power Button
Press to turn the unit on and off.
7
CONNECTIONS
CONNECTING A TV ANTENNA / CABLE / SATELLITE
To view television channels correctly, a signal must
be received from one of the following sources:
- An indoor or outdoor aerial antenna
- A cable system
- A satellite system
NOTE
For receiving over-the-air TV broadcasts, we
recommend that you use an external fixed antenna.
Should you require the use of a temporar y antenna,
please ensure that you purchase an antenna with
sufficient ability to receive in weak signal areas.
Only when you are in close proximity to a transmitter
will a temporar y antenna reproduce a signal as
strongly as a fixed antenna.
Satellite, cable or TV antenna
cable to TV ANTENNA
terminal (cable not included)
CONNECTING AN A/V DEVICE
To connect to other equipment such as a VCR, camcorder, satellite system or cable, etc.
Connecting to a VCR / Camcorder /
Satellite System / Cable
Connect the AUDIO and S-VIDEO cable
(not included) as shown.
Make sure you connect the cable from the other
equipment ( AUDIO OUT and S-VIDEO OUT ) to
this unit ( AUDIO IN and S-VIDEO IN ).
NOTE
Please refer to the user manual for the other
equipment for more information.
To S - VI DIO IN
jacks (AV IN)
To AUDIO IN
jacks (AV IN)
To S-VIDEO OUT / AUDIO OUT jacks
CONNECTING DEVICES WITH A COMPOSITE (YELLOW RCA-TYPE)
VIDEO OUTPUT
To connect A/V devices such as a VCR, video game system or camcorder.
Connecting to a VCR / Video Game System / Camcorder
Connect the AUDIO / VIDEO cable (not included) as shown.
Make sure you connect the cable from the other equipment ( AUDIO and VIDEO OUT ) to this unit
( AUDIO and VIDEO IN ).
NOTE
Please refer to the user manual
for the other equipment for
more information.
To AUDIO / VIDEO
IN jacks (AV IN)
To AUDIO / VIDEO
OUT jacks
8
CONNECTIONS
CONNECTING A HIGH-DEFINITION (HD) SOURCE USING COMPONENT CONNECTION
High-Definition (HD) Devices with component video output must be connected to the Y PbPr input.
Connect the component video cable and audio cable (not included) as shown.
Make sure you connect the component video cable and audio cable from the other equipment
( COMPONENT OUT and AUDIO OUT ) to this unit ( COMPONENT IN and AUDIO I N ).
NOTE
When connecting a DVD player to the television,
the picture resolution is solely dependent upon
the resolution supported by the DVD player attached.
DVD player resolutions vary from 480i to 1080i,
and this television can support DVD players up to
a maximum resolution of 1080i.
* May require a subscription
for receiving HD channels,
check with your cable/satellite
ser vice provider for details.
To COMPONENT
VIDEO IN jacks
( COMPONENT IN)
To AUDIO
IN jacks
( COMPONENT IN)
To COMPONENT
VIDEO OUT jacks
To AUDIO
OUT jacks
CONNECTING A HIGH-DEFINITION (HD) SOURCE USING HDMI CONNECTION
HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection
for use with DVD players, DTV, set-top boxes and other digital AV devices. HDMI was developed to provide
the technologies of High Bandwidth Digital Content Protection (HDCP) as well as Digital Visual Interface
(DVI) in one specification. HDCP is used to protect digital content transmitted and received by
DVI-compliant or HDMIcompliant displays.
HDMI has the capability to support standard, enhanced or high-definition video plus standard to
multi-channel surround-sound audio. HDMI features include uncompressed digital video, a bandwidth of
up to 2.2 gigabytes per second (with HDTV signals), one connector (instead of several cables and
connectors), and communication between the AV source and AV devices such as DTVs.
Connect the HDMI cable (not included) as
shown:
Make sure you connect the cable from the
source equipment ( HDMI OUT ) to this unit
( HDMI IN ).
HDMI CABLE
(NOT INCLUDED)
To HDMI
IN jack
To HDMI
OUT jack
9
CONNECTIONS
CONNECTING A PC
Connect the 15-pin D-SUB PC/VGA connector
from your computer to the 15-pin D-SUB PC/VGA
input on this unit using a monitor cable and an
audio cable (not included) as shown.
CONNECTING HEADPHONES
• Turn down the volume before
connecting headphones to
the unit, then adjust the
volume to your desired level.
• When headphones are
Make sure you connect the cable from the computer connected, no sound will come
from the front speakers.
( VGA and AUDIO - PC OUT ) to this unit
NOTE
( VGA and AUDIO - PC IN ).
Avoiding listening to sound at high
levels for prolonged period of time.
This may be harmful to you and may
cause hearing loss.
TO AUDIO OUT jacks
TO PC Connector
Headphones
(1/8"[ 3.5mm ]diameter plug)
NOT INCLUDED
CONNECTING THE POWER CORD
You can power your TV unit by plugging the detachable AC power cord into the AC socket on the back of
the unit and into a wall AC power outlet. Check that the rated voltage of your unit matches your local
voltage. Make sure that the AC power cord is fully inserted into the unit.
NOTE
• Insert the power plug fully into the socket outlet .
( If the power plug is loose , it could generate heat and
cause fire .)
• Ensure that the power plug is easily accessible .
• Ensure the earth pin on the power plug is securely
connected to prevent electrical shock .
• An apparatus with CLASS I construction shall be
connected to a power socket outlet with a protective
grounding connection.
• Do not touch the power plug with a wet hand .
( This may cause electrical shock .)
• Do not use any power cord other than that provided
withthis TV . ( This may cause fire or electrical shock .)
• Do not damage the power cord .
( A damaged cord may cause fire or electrical shock .)
• Do not move the TV with the cord plugged in the
socket outlet.
• Do not place a heavy object on the cord or place
the cord near a high-temperature object.
• Do not twist the cord, bend it excessively, or stretch it.
• Do not pull on the cord. Hold onto the power plug body when disconnecting cord.
• Do not use a damaged power plug or socket outlet.
10
To AC wall outlet
WALL MOUNT INSTALLATION
INSTALLING / REMOVING THE BASE STAND
WARNING : The LCD Display is ver y fragile , and must be protected at all times when removing the base
stand .
Be sure that no hard or sharp object , or anything that could scratch or damage the LCD display , comes into
contact with it . Do NOT exert pressure on the front of the unit at any time because the screen could crack .
1 . Disconnect all cables or cords connected to the unit .
2 . Lay the unit down on a flat surface with the back side facing up . Please make sure to place a soft
cushioned material ( such as a pillow or thick piece of foam ) beneath the screen .
3 . To remove the base stand , loosen screws off the holes then pull downwards to release
the base stand .
4 . To install the base stand , put the stand into the hole at the bottom of the TV then insert screws to the
holes and tighten.
MOUNTING ON THE WALL
This unit is VESA-compliant, and is designed to be wall-mounted with a VESA-compliant 3” x 3”
(75mm x 75mm) mounting kit designed for flat-panel TVs (not supplied). Mount this unit according to
the instructions included in the mounting kit.
NOTE
Remove the base stand before mounting the unit on the wall.
3”
3”
11
INITIAL SETUP
PUTTING THE UNIT ON A PROPER PLACE
When you turn on your television set for
the first time, be sure to place it on a solid
stable surface.
To avoid danger, do not expose the TV
to water, or a heat source
(e.g. lamp, candle, radiator).
Do not obstruct the ventilation grid
at the rear and be sure to leave sufficient
gaps around the unit.
SOURCE SELECTION
INPUT SO URCE
1. Press the TV /AV button on the remote control.
2. Use the or button to select the options
( TV, AV, S-Video, DVD, Component , HDMI, VGA)
and select any of them using the
button or
the ENTER button.
(The screen will change to your desired s ource ).
TV
AV
S-Video
DVD
Component
HDMI
VGA
Note:
Before watching please make sure all necessary
cables and devices are connected.
TURNING THE UNIT ON FOR THE FIRST TIME
After you have initially connected your TV
antenna or cable(no set top box)
turn the television ON.
A screen will display asking you to run a
Channel Auto Scan to search and receive
available local digital channels.
Please run
Channel Auto Scan
in the TV menu
It is here where you will select antenna options
and run Channel Auto Scan .
Channels will be stored in the TV tuner.
• Press the MENU button on the remote control.
• Using the
buttons, scroll to highlight TV mode .
• Press the button to highlight AIR/CABLE.
12
INITIAL SETUP
How to Navigate
Air Mode: Select AIR when connected to an
indoor/outdoor antenna.
Cable Mode: Select CABLE if you subscribe to
a pay television service includ ing satellite.
12
12
6
6
Picture
Audio
Time
Setup
Parental
Picture
TV
Auto Scan
Auto Scan
Favorite
Favorite
Show Hide
Show Hide
KOCE LB
Channel label
TV
DTV Signal
Move
Select
MENU
Move
Exit
• Using the
button to highlight AIR .
Select
6
Setup
Parental
Picture
TV
Auto
Cable System
Exit
12
6
Time
MENU
button to highlight CABLE .
12
Audio
Parental
Cable
Channel label
DTV Signal
Picture
Setup
Channel No
Channel No
• Press the
Time
Air/Cable
Air
Air/Cable
Audio
Audio
Time
Setup
Parental
TV
Auto
Cable System
Start to Scan
Start to Scan
Move
Next
MENU
Move
Exit
• Press the button to select Auto Scan then
press the button to start Channel Auto Scan.
Next
MENU
Exit
• Press the button to select Auto Scan .
Press the ENTER button and the cursor will move
up and CABLE SYSTEM will be displayed next.
• Press the button to select STD > IRC > HRC >
Auto (Auto is recommended).
• Press the button to select Auto Scan
and press ENTER to start Channel Auto Scan.
12
12
6
Picture
Audio
Move
Ti m e
Setup
Parental
Picture
TV
Audio
Ti m e
Setup
RF CH
7
RF CH
7
Found
4
Found
4
Next
MENU
Move
Exit
• Channel Auto Scan may take several minutes
to complete.
Next
Parental
MENU
TV
Exit
• Channel Auto Scan may take several minutes
to complete.
NOTE: For cable or satellite users with no TV antenna, there no need to run Chan nel Auto Scan.
Connect your cable or satellite set top box to one of the avail able inputs on the TV for viewing.
13
TV SETUP
Picture
PICTURE MENU
The PICTURE menu offers options to enhance and refine the picture displayed on your TV
based on ambient room light and personal prefer ences.
Adjustment options include contrast, brightness, color, sharpness and color temperature.
How to Navigate:
Press the MENU button on the remote control. Navigate using the
buttons to select PICTURE .
12
6
Picture
Audio
Picture Mode
Time
Setup
Parental
TV
Standard
Contrast
50
Brightness
50
Color
50
Tint
0
50
Sharpness
Color Mode
Move
Normal
Select
MENU
Press the button to highlight Picture Mode ,
then press the button to select your viewing
preference from 4 factory options:
STANDARD > DYNAMIC > MOIVE > PERSONAL.
The STANDARD setting is recommended for most
viewing environments.
Depending on the ambient light level in the room,
you may find one of the other options
more pleasing.
Exit
To make more critical picture adjustments based on your own preferences in PERSONAL:
12
6
Picture
Audio
Time
• Use the button to highlight Contrast .
Navigate using the
buttons to
increase or decrease contrast intensity.
Setup
Parental
TV
Standard
Picture Mode
Contrast
50
Brightness
50
Color
50
Tint
0
50
Sharpness
Normal
Color Mode
Move
Adjust
MENU
Exit
12
6
Picture
Audio
Picture Mode
• Use the button to highlight Brightness .
Navigate using the
buttons to
increase or decrease overall brightness.
Time
Setup
Parental
Contrast
50
Brightness
50
Color
50
Tint
0
50
Sharpness
Color Mode
Move
14
TV
Standard
Normal
Adjust
MENU
Exit
TV SETUP
Picture
PICTURE MENU
The PICTURE menu offers options to enhance and refine the picture displayed on your TV
based on ambient room light and personal prefer ences.
Adjustment options include contrast, brightness, color, sharpness and color temperature.
How to Navigate:
Press the MENU button on the remote control. Navigate using the
12
12
6
Picture
Audio
buttons to select PICTURE .
6
Time
Setup
Parental
TV
Picture
Standard
Picture Mode
Audio
Time
Setup
Parental
TV
Standard
Picture Mode
Contrast
50
Contrast
50
Brightness
50
Brightness
50
Color
50
Color
50
Tint
0
Tint
0
Sharpness
50
Sharpness
Normal
Color Mode
Move
Adjust
MENU
Exit
• Use the button to highlight Color .
Navigate using the
buttons to
increase or decrease color intensity.
Move
Picture Mode
Time
MENU
Exit
12
6
6
Audio
Adjust
• Use the button to highlight Tint .
Navigate using the
buttons to adjust colors
toward green or reddish tint.
12
Picture
50
Normal
Color Mode
Setup
Parental
Picture
TV
Audio
Picture Mode
Standard
Time
Setup
Parental
TV
Standard
Contrast
50
Contrast
50
Brightness
50
Brightness
50
Color
50
Color
50
Tint
0
Tint
0
Sharpness
50
Sharpness
Color Mode
Move
Color Mode
Normal
Adjust
MENU
Move
Exit
• Use the button to highlight Sharpness .
Navigate using the
buttons to soften or
view crisper edges in the picture.
50
Normal
Adjust
MENU
Exit
• Use the button to highlight
Color Temperature .
Navi gate using the
buttons to select COOL
(more bluish tone), NORMAL or WARM.
The default setting is NORMAL.
WARM mode will provide color that is calibrated
to D6500° Kelvin, the standard color that
broadcast stations and the Motion Picture
industry consider as the most accurate to
view programming.
Note: When adjustments are completed, you may select another menu by pressing
the Menu button.
15
TV SETUP
Audio
AUDIO MENU
The AUDIO menu offers options to make sound enhancements while listening through the built-in
speakers and personal preferences.
Adjustment options include bass, treble, balance, surround , AVC and audio language.
.
How to Navigate:
Press the MENU button on the remote control. Navigate using the
buttons to select AUDIO .
12
6
Picture
Audio
Sound Mode
Time
Setup
Parental
TV
Standard
Bass
50
Treble
50
Balance
50
Surround
Off
AVC
Surround
Off
Audio Language
Move
The STANDARD setting is recommended for most
sound environments.
Depending on the surroundings in the room,
you may find one of the other options
more pleasing.
English
Select
Press the button to highlight Sound Mode ,
then press the button to select your sound
preference from 4 factory options:
STANDARD > MUSIC > MOVIE > PERSONAL.
MENU
Exit
To make more critical audio adjustments based on your own preferences in PERSONAL:
12
6
Picture
Audio
Time
• Use the button to highlight Bass .
Navigate using the
buttons to
increase or decrease low frequency intensity.
Setup
Parental
TV
Standard
Sound Mode
Bass
50
Treble
50
Balance
50
Surround
Off
Off
AVC
Surround
Audio Language
English
Move
Adjust
MENU
Exit
12
6
Picture
Audio
Sound Mode
• Use the button to highlight Treble .
Navigate using the
buttons to
increase or decrease high frequency intensity.
Time
Setup
Parental
Bass
50
Treble
50
Balance
Surround
AVC
Surround
Audio Language
Move
16
TV
Standard
50
Off
Off
English
Adjust
MENU
Exit
TV SETUP
Audio
AUDIO MENU
The AUDIO menu offers options to make sound enhancements while listening through the built-in
speakers and personal preferences.
Adjustment options include bass, treble, balance, surround , AVC and audio language.
.
How to Navigate:
Press the MENU button on the remote control. Navigate using the
12
12
6
6
Picture
Audio
Time
Setup
Parental
Picture
TV
Audio
Time
Setup
Parental
TV
Standard
Sound Mode
Standard
Sound Mode
buttons to select AUDIO .
Bass
50
Bass
50
Treble
50
Treble
50
Balance
50
Balance
Surround
AVC
Surround
Audio Language
Off
Surround
Off
AVC
Surround
Adjust
Off
Audio Language
English
Move
50
Off
MENU
Move
Exit
Sound Mode
Exit
6
6
Time
MENU
12
12
Audio
Select
• Use the button to highlight Surround .
Navigate using the button to turn the
dimensional surround effect ON or OFF.
(for built-in speakers only).
• Use the button to highlight Balance .
Navigate using the
buttons to adjust sound
towards the right or left speaker.
Picture
English
Setup
Parental
Picture
TVl
Audio
Sound Mode
Standard
Time
Setup
Parental
TV
Standard
Bass
50
Bass
50
Treble
50
Treble
50
Balance
50
Balance
Surround
AVC
Surround
Audio Language
Move
Off
Surround
Off
AVC
Surround
Audio Language
English
Select
MENU
Move
Exit
• Use the button to highlight AVC .
Navigate using the button. In the ON position,
Automatic Volume Control will limit the level
of increased volume heard during
television commercials and volume differences
between inputs.
50
Off
Off
English
Select
MENU
Exit
• Use the button to highlight Audio Language .
Navigate using the
buttons to select to listen
to an alternative language broad cast
(if available) English > Spanish > French.
( You may select an alternative language using
the remote control by pressing MTS )
Note: When adjustments are completed, you may select another menu by pressing
the Menu button.
17
TV SETUP
12
6
TIME MENU
Time
The TIME menu includes adjustment of settings for your local time zone and daylight savings time.
The clock will adjust automatically after the initial Channel Auto Scan of available broadcast
channels in your area.
How to Navigate:
Press the MENU button on the remote control. Navigate using the
buttons to select TIME .
12
12
6
6
Picture
Audio
Time
Setup
Picture
TV
Parental
Audio
Time
Setup
Off
Sleep Timer
Off
Time Zone
Pacific
Time Zone
Pacific
Daylight Saving Time
Off
Daylight Saving Time
Move
Select
MENU
Move
Exit
• Use the button to highlight Sleep Timer ,
then press the button to select among:
5min, 10min, 15min, 30min, 45min, 60min,
90min, 120min, 180min, 240min and off.
Time
MENU
6
Setup
Picture
TV
Parental
Audio
Time
Setup
Parental
Sleep Timer
Off
Sleep Timer
Off
Time Zone
Pacific
Time Zone
Pacific
Daylight Saving Time
Off
Daylight Saving Time
Move
Select
MENU
• Use the button to highlight
Daylight Saving Time .
Navi gate using the
buttons to turn
this feature on or off.
Move
Exit
Off
Select
MENU
• Clock: Display the time at present.
Note: When adjustments are completed, you may select another menu by pressing
the Menu button.
18
TV
2007 10 31 04 04 PM
Clock
2007 10 31 04 04 PM
Clock
Exit
12
6
Audio
Select
• Use the button to highlight Time Zone ,
then press the button to select among:
EASTERN > CENTRAL > MOUN TAIN >
PACIFIC > ALASKA > HAWAII.
12
Picture
Off
2007 10 31 04 04 PM
Clock
2007 10 31 04 04 PM
Clock
TV
Parental
Sleep Timer
Exit
TV SETUP
Setup
SETUP MENU
In the SETUP menu you may change the initial set up of preferences that include settings for
language, menu display, computer monitoring, closed captions, enhancement of black detail
in the picture and resetting your TV back to its factory default status.
How to Navigate:
Press the MENU button on the remote control. Navigate using the
buttons to select SETUP .
12
12
6
6
Picture
Audio
Time
Setup
Lock
Parental
Picture
Channel
TVl
English
Menu Language
Transparency
Advance
Close Caption
Close Caption
XVS
Off
XVS
On
Channel
TV
Normal
Noise Reduction
Advance
Lock
Parental
Off
Zoom Mode
Off
Setup
English
Transparency
Normal
Noise Reduction
Time
Menu Language
Off
Zoom Mode
Audio
On
Restore Default
Restore Default
Move
Select
MENU
Move
Exit
Select
MENU
Exit
• Use the button to highlight Menu Language ,• Use the button to highlight Noise Reduction .
Press the button to select the language
Navigate using the
buttons to reduce video
you prefer among English, French and Spanish. noise: Off > Low > Medium > High
( Default setting: medium)
12
12
6
Picture
Audio
Time
6
Setup
Lock
Parental
Channel
TV
Picture
English
Menu Language
Transparency
Normal
Off
Noise Reduction
Advance
Advance
Close Caption
Close Caption
XVS
On
On
XVS
On
Restore Default
TV
Off
Zoom Mode
Off
Parental
l
Setup
English
Transparency
Normal
Noise Reduction
Time
Menu Language
Off
Zoom Mode
Audio
Restore Default
Move
Select
MENU
Exit
Move
Select
MENU
Exit
• Use the button to highlight Transparency . • Use the button to highlight XVS .
Navigate using the
buttons to turn Off or On Navigate using the
buttons to select:
the translucent effect of the OSD.
Off > On. XVS provides noticeable black detail
enhancement that may be preferred.
12
12
6
6
Picture
Audio
Menu Language
Transparency
Zoom Mode
Noise Reduction
Time
Setup
Lock
Parental
Picture
Channel
Audio
Menu Language
English
Transparency
Off
Zoom Mode
Normal
Noise Reduction
Off
Advance
Advance
Close Caption
Close Caption
XVS
Parental
TV
Off
Normal
Are you sure ?
Off
No
Restore Default
Restore Default
Move
Setup
English
On
On
XVS
On
Time
Select
MENU
Move
Exit
Select
Next
MENU
Exit
Exit
Yes
When
prompted,
Select "Yes"
to confirm.
• Use the button to highlight Zoom Mode .
• Use the button to highlight Restore Default .
Navigate using the
buttons to select the
Press the button to automatically set all
viewing mode: Normal > Wide > Zoom > Cinema.adjust ments back to their original settings.
19
TV SETUP
Setup
SETUP MENU
The SETUP menu includes adjustments for activating the Closed Caption feature for display
on the television and customizing CC display types and font styles.
How to Navigate:
12
12
6
6
Picture
Audio
Time
Setup
Lock
Parental
Picture
Channel
TV
Transparency
Parental
TVl
On
CC1
Advanced Selection
Normal
Service1
Option
Off
Noise Reduction
Setup
Basic Selection
Off
Zoom Mode
Time
CC Mode
English
Menu Language
Audio
Advance
Close Caption
XVS
On
Restore Default
Move
Select
Next
MENU
Move
Exit
Exit
Select
MENU
Exit
Press the MENU button on the remote control. • Use the button to highlight Advance Selection .
buttons to select
Navigate using the
buttons to select SETUP. Navi gate using the
Press the button to highlight Closed Caption Service 1 - 6.
then press the button to select from the
following options.
12
12
6
6
Picture
Audio
Time
Setup
Parental
Picture
Basic Selection
Parental
TV
On
Basic Selection
CC1
Advanced Selection
Service1
Service1
Option
Option
Move
Select
MENU
Move
Exit
Setup
Parental
Picture
TV
Time
Setup
Parental
Mode
Custom
CC1
Font Style
Default
Service1
Font Size
Default
Font Edge Style
Default
Font Edge Color
Default
FG Color
Default
BG Color
Default
FG Opacity
Default
BG Opacity
Default
Basic Selection
Option
Move
Audio
On
CC Mode
Advanced Selection
Exit
6
6
Time
MENU
12
12
Audio
Next
• Use the button to highlight Option .
Press the button to enter a menu with options
to cus tomize text fonts, colors and opacities.
• Use the button to highlight CC Mode .
Navi gate using the
buttons to select
Off > On > CC on Mute.
Picture
Setup
CC Mode
CC1
Advanced Selection
Time
TV
On
CC Mode
Audio
Select
MENU
Move
Exit
Select
MENU
• Use the button to highlight Basic Selection .
Navigate using the
buttons to select
CC 1-4, Text 1-4.
Note: When adjustments are completed, you may select another menu by pressing
the Menu button.
20
TV
Exit
TV SETUP
Setup
SETUP MENU
In the SETUP menu you may adjust the position of images displayed on screen once you connect
an input signal from your PC. Recom mended resolution is 1366 x 768.
If your PC system uses a standard signal mode, the screen will adjust automatically.
Connect an optional 3.5mm audio cable for stereo sound.
How to Navigate:
After connecting to a PC , press the INPUT button and highlight VGA , then press the ENTER button.
12
12
6
6
Picture
Audio
Time
Setup
Lock
Parental
Picture
Channel
TV
English
Menu Language
Transparency
Off
Zoom Mode
Normal
Audio
Time
Setup
Parental
50
V - pos
50
Clock
50
Phase
0
Off
Noise Reduction
Advance
TV
H - pos
Auto
Close Caption
XVS
On
Restore Default
Move
Select
MENU
Move
Exit
Press the MENU button on the remote control
and navigate using the
buttons to select
SETUP . Press the button to highlight
Advanced , then press the button to select
from the following options.
Time
Exit
12
6
6
Audio
MENU
• Use the button to highlight Clock .
Navi gate using the
buttons to control the
width of the image.
12
Picture
Adjust
Setup
Parental
Picture
TV
Audio
Time
Setup
Parental
TV
H - pos
50
H - pos
50
V - pos
50
V - pos
50
Clock
50
Clock
50
Phase
0
Phase
0
Auto
Auto
Move
Adjust
MENU
Move
Exit
• Use the button to highlight H-Pos .
Navigate using the
but tons to adjust the
position of images displayed from side to side.
Time
6
Setup
Parental
TV
Picture
Audio
Time
Setup
Parental
TV
H - pos
50
H - pos
50
V - pos
50
V - pos
50
Clock
50
Clock
50
Phase
0
Phase
0
Auto
Auto
Move
Exit
12
6
Audio
MENU
• Use the button to highlight Phase .
Navigate using the
buttons to improve focus
and image stability.
12
Picture
Adjust
Adjust
MENU
Exit
• Use the button to highlight V-POS .
Navigate using the
buttons to adjust the
position of images displayed up and down.
Are you sure ?
No
Yes
When
prompted,
Select "Yes"
to confirm.
Move
Next
MENU
Exit
• Use the button to highlight AUTO .
Press the button to automatically adjust the
display to the best setting.
21
TV SETUP
Lock
PARENTAL MENU
In the PARENTAL menu you may block television by inputting passwords.
To gain access and select your preferences within the Parental menu
make certain your input is set to TV.
How to Navigate:
Press the MENU button on the remote control. Navigate using the
buttons to select Parental .
12
12
6
6
Picture
Audio
Time
Setup
Picture
TV
Parental
Audio
Time
Setup
Parental
TV
Enter New Password
Enter Password
Confirm Password
0~9
MENU
0~9
Exit
Press the button to highlight
ENTER PASSWORD . Enter your 4 digit code
(factory default code is "0000")
unless previously changed.
12
6
Audio
Time
6
Setup
Parental
Picture
TV
Change Password
Audio
Time
Setup
TV
Parental
Change Password
System Lock
System Lock
On
US
US
Canada
Canada
RRT Setting
RRT Setting
Reset RRT
Reset RRT
Move
Exit
• Use the numeric buttons to input a new
4 digit code by two times.
12
Picture
MENU
Next
MENU
Move
Exit
On
Select
MENU
Exit
• To change the password, press the
button
• To make changes to PARENTAL controls,
to display a screen to enter your new password, high light SYSTEM LOCK then press
the button to ON.
then confirm again.
NOTE: RRT Setting and Reset RRT are not user’s adjustable settings.
22
TV SETUP
PARENTAL MENU
Lock
In the PARENTAL menu you may block television and movie programming based on
U.S TV and movie rating guidelines. To gain ac cess and select your preferences
within the Parental menu make certain your input is set to TV.
How to Navigate:
Press the MENU button on the remote control. Navigate using the
buttons to select Parental .
Press the button to highlight ENTER PASSWORD . Enter your 4 digit code
(factory default code is "0000") unless previously changed.
• To set parental controls for television programming or DVD movies, press the
highlight US . Navigate using the
buttons to highlight TV/MPAA menu.
buttons to
12
12
6
6
Picture
Audio
Time
Setup
Parental
Picture
TV
Audio
TV
TV
ALL
MPAA
N A
Setup
Time
FV
Parental
TV
RATING
V
S
L
D
TV Y
TV Y7
TV G
TV PG
TV 14
TV MA
Block
Move
Next
MENU
• Highlight TV , then press the
Move
Exit
Press “OK” to lock or unlock
Next
MENU
Exit
button to enter the TV Ratings menu to select your preference.
12
N/A
6
Picture
Audio
Time
Setup
Parental
TV
TV
MPAA
Move
N A
Select
MENU
• Highlight MPAA then press the
Exit
button repeatedly to select your movie rating prefer ence.
23
TV SETUP
Lock
PARENTAL MENU
In the PARENTAL menu you may block television and movie programming based on
Canadian TV and movie rating guidelines. To gain ac cess and select your preferences
within the Parental menu make certain your input is set to TV.
How to Navigate:
Press the MENU button on the remote control. Navigate using the
buttons to select Parental .
Press the button to highlight ENTER PASSWORD . Enter your 4 digit code
(factory default code is "0000") unless previously changed.
• To set parental controls for television programming or DVD movies, press the
buttons to
highlight Canada .Navigate using the
buttons to highlight Canada English/Canada French menu.
12
6
Picture
Audio
Time
Setup
Parental
Canada English
G
Canada French
G
Move
Select
MENU
TV
Rating
Description
E
Exempt.
C
Children.
C8 +
Recommended for children age 8 and older.
G
GENERAL AUDIENCES , Suitable for all ages
PG
PARENTAL GUIDANCE SUGGESTED
- Some material may not be suitable for children.
14 +
Viewers 14 years and older
18 +
Adult Programming.
Exit
• Navigate using the button to highlight CANADA ENGLISH then press the
to select your ratings preference.
button repeatedly
12
6
Picture
Audio
Time
Setup
Parental
Canada English
G
Canada French
G
Move
Select
MENU
TV
Rating
Description
E
Exempt.
G
GENERAL AUDIENCES, Suitable for all ages.
8 ans+
Not recommended for young children.
13 ans+
Not suitable for children under the age of 13.
16 ans+
Not suitable for children under the age of 16.
18 ans+
Adult Programming.
Exit
• Navigate using the button to highlight CANADA FRENCH then press the
to select your ratings preference.
button repeatedly
NOTE: When adjustments are completed, you may select another menu by pressing
the Menu button .
24
TV SETUP
TV MENU
Channel
The TV menu provides for the setup of your television to receive TV channels, store your favorites,
add or skip channels and label them by their call letters.
How to Navigate:
Press the MENU button on the remote control. Navigate using the
Press the
button to highlight your preferences.
12
12
6
6
Picture
Audio
buttons to select TV .
Time
Setup
Parental
Picture
TV
Air
Air/Cable
Auto Scan
Favorite
Add Delete
50 3
Channel No
KOCE LB
Channel Lable
Good
DTV Signal
Audio
Time
Setup
Channel
Program Name
2 0
14 1
14 2
14 3
50 1
50 2
50 3
66 0
ATSC
ATSC
ATSC
KOCE
KOCE
KOCE
Parental
TV
Favorite
1
2
3
HD
SD
LB
Prev
Move
Nxet
MENU
Next
Move Press ’ENTER’ Change
Exit
MENU
Exit
• Highlight FAVORITE to add channels to your Favorites List. Navigate using the
buttons
to select channels to be added or deleted from your list. Press the ENTER button to add or delete
a channel. A check mark indicates a channel has been added. You may also display your FAVORITE
list from the remote control by pressing FAV.
12
12
6
6
Picture
Audio
Time
Setup
Parental
Picture
TV
Air
Air/Cable
Auto Scan
Favorite
Add Delete
50 3
Channel No
KOCE LB
Channel Lable
Good
DTV Signal
Audio
Time
Setup
Channel
Program Name
2 0
14 1
14 2
14 3
50 1
50 2
50 3
66 0
ATSC
ATSC
ATSC
KOCE
KOCE
KOCE
Parental
1
2
3
HD
SD
LB
Prev
Move
Next
MENU
Next
Move Press ’ENTER’ Change
Exit
TV
Add/Delete
MENU
Exit
• Highlight ADD/DELETE to select or skip channels already in memory. Navigate using
buttons to access the list of available channels. Press the ENTER button to change the channels
status. A checkmark indicates a channel has been added.
12
12
6
6
Picture
Audio
Time
Setup
Parental
Picture
TV
Audio
Time
Setup
Parental
TV
Air
Air/Cable
Auto Scan
Favorite
KBBC - DT
Add Delete
50 3
Channel No
Channel Lable
KOCE LB
Good
DTV Signal
Move
Next
MENU
Move
Exit
Next
MENU
Exit
• Highlight CHANNEL LABEL to name or rename a broadcast channel. Navigate using the button
to enter the screen menu to re-label a channel. Use the
buttons to spell out each letter,
number or character. Use the
buttons to ad vance to the next space.
25
TV SETUP
ZOOM MODE
AUDIO
ZOOM
The ZOOM function offers several viewing display options on the 16:9 screen.
Press ZOOM to cycle through the following widescreen settings.
1. NORMAL
Recommended for viewing native
widescreen content and
undistorted 4:3 images.
(With Black Bars)
2. WIDE
Stretches certain 4:3 content and
may reduce the black bars.
3. ZOOM
Stretches the image both vertically
and horizontally to fill the screen
when viewing widescreen content.
The zoom effect will crop images
somewhat.
4. CINEMA
When viewing 4:3 content,
Cinema mode will fill the entire
screen eliminating the side black bars.
It may also eliminate or reduce black
bars on certain widescreen movies.
4. CINEMA
26
PROG
PROG
D.SETUP
CCD
ZOOM
EPG
REPEAT
A -B
A-B
INTRO
SUBTITLE TITLE
D.DISP
GOTO
D.MENU TITLE
D.DISP
GOTO
DISC FORMATS
ICONS USED ON DVDs
NOTES ON COPYRIGHT
It is forbidden by law to copy, broadcast, show,
broadcast on cable, play in public or rent
copyrighted material without permission.
Apparatus Claims of U.S. Patent Nos. 6,836,549;
6,381,747; 7,050,698; 6,516,132; and 5,583,936
licensed for limited viewing uses only.
DVDs are copy protected, and any recordings made
from these discs will be distorted. This product
incorporates copyright protection technology that is
protected by method claims of certain U.S. patents
and other intellectual property rights owned by
Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be
authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses
only, unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly
is prohibited.
Sample Icons
Language selections for audio
Language selections for subtitles
Screen aspect ratio
Multiple camera angles
Region code indicator
NOTE
When playing back a CD-G (Graphics) or
CD EXTRA disc, the audio portion will be played,
but the graphic images may not be shown.
TITLES, CHAPTERS AND TRACKS
The unit can play:
• DVDs are divided into "TITLES" and "CHAPTERS".
If the disc has more than one movie on it,
each movie would be a separate "TITLE".
“CHAPTERS" are sections of titles.
DVDs
[8cm/12cm disc]
CD-R CD-RW
Audio CDs
Compatible
[8cm/12cm disc]
REGION MANAGEMENT INFORMATION
Region Management Information: This unit is
designed and manufactured to respond to the
Region Management Information that is encoded
on DVDs. If the region number printed on the
DVD does not correspond to the region number
of this unit, this unit cannot play that disc.
The region number of this equipment is
• Audio CDs are divided into "TRACKS".
A "TRACK" is usually one song on an Audio CD.
.
DISC FUNCTION OR OPERATION
THAT IS NOT AVAILABLE
When the symbol appears on the screen,
it indicates that the function or operation
attempted is not available at that time.
This occurs because the DVD manufacturer
determines the specific functions.
Certain functions may not be available on
some discs. Be sure to read the documentation
provided with the DVD.
NOTE
Numbers identify each title, chapter and track
on a disc. Most discs have these numbers record
on them, but some do not.
NOTES ON UNAUTHORIZED DISCS
You may not be able to playback some DVDs
on this equipment if they were purchased from
outside your geographic area or made for
business purposes.
27
CD/DVD OPERATION
This owner’s manual explains the basic instructions of this unit. Some DVDs are produced with
limited operation during playback. For example, many DVDs do not allow users to skip government
warnings, or in some cases previews or other features. This is not a defect in the unit. Refer to
the instruction notes of discs.
“ ” may appear on the screen during operation. A “ ” means that the desired operation is
not permitted by the unit or disc.
BASIC OPERATIONS
TURN ON AND OFF THE DVD FUNCTION
Turn on the LCD TV and then press the TV / AV button repeatedly to select DVD mode.
INSERT DISC TO DVD
Insert the Disc to the Disc door (label side of the disc has to face towards front of the unit), the player
will load the disc automatically. There will have an on screen indication “ CLOSE ” then “ READ ”. After
loading the disc content, it will switch to play mode automatically. If the disc is already placed inside,
the disc will be read automatically.
NOTE: For some discs, after loading the content of the disc, need to press the or select from the disc menu
to start.
Please make sure when inserting the Disc, the label side of the disc should be facing you when inserting
the Disc incorrectly, you may damage the DVD mechanism.
PLAYING A PICTURE FILE DISC
This unit can play JPG files recorded on CD-R and CD-RW discs.
1. Hold the disc by its edge and gently push it into the door, with the label side facing the front.
2. The unit will load the disc and automatically display the contents of the disc on the screen, while also
beginning to play the picture file. These files will then be played back one by one.
3. Press the button to go to the folder list.
4. Press the or button to highlight a file to play. Press the button
to start playback .
PAUSING /PLAYING PLAYBACK
Press the button
to switch between pausing and playing.
STOPPING PLAYBACK
Press the button
at the location where you want to interrupt playback . To resume playback at the
position where the disc was stopped, press the button
.
If you press the button twice, the unit's memor y will be cleared and pressing the button
will
reset the disc to the beginning.
SKIP (FORWARD / REVERSE)
PREV button to go back to previous chapters/tracks.
• Press the
NEXT button to advance chapters/tracks.
• Press the
• For an Audio CD, use the number buttons (remote control only) to jump directly to that track number.
TITLE (for DVD disc only)
• Press the TITLE button, there will have an on screen indication “ TITLE”.
• Press the direction or numeric buttons to select your favorite title.
28
CD/DVD OPERATION
VOLUME
• Press the VOL - / VOL + buttons to adjust the output volume.
NOTE: Playback DVD discs in original code, is not adjustable.
MUTE
• Press the MUTE button to mute the audio output. There will have an on screen symbol indicate “MUTE”.
• Press again to cancel, or Press the VOL + button to cancel and adjust the volume.
• In case there is no audio output, tr y to press the MUTE button to cancel mute.
ZOOM
• Press the ZOOM button to zoom in the picture.
• There are 6 zoom modes, press the ZOOM button to toggle between different zoom modes in sequent.
(Zoom2 - Zoom3 - Zoom4 - Zoom1/2 - Zoom1/3 - Zoom1/4 - Zoom OFF)
• In Zoom2-4, you may use the , , , buttons to pan the picture for your favorite portion.
A-B
• In normal Playback , fast for ward or fast reverse, press the A-B button at where you want to
start the repeat portion. There will have an on screen indication “REPEAT A “.
• In normal Playback , fast for ward or fast reverse, press the A-B button again at where you want to
stop the repeat portion. There will have an on screen indication “REPEAT A B“.
• The repeat function started to playback the portion from A to B automatically.
• Press the A-B button again to cancel. There will have an on screen indication “A B CANCEL”.
NOTE:
For Super VCD, VCD & CD discs, repeat A-B is only function within the same track . When playing the
others, repeat A-B will cancel automatically.
For Super DVD discs, repeat A-B is only function within the same Title /Chapter. When playing the
others, repeat A-B will cancel automatically.
PROGRAM
Using Program playback, you can select max. 16 tracks from the disc to playback in programmed order.
OSD for program playback as below.
TITLE / CHAPTER PROGRAMMED PLAYBACK ( DVD )
TITTLE
CHAPTER
TRACK PROGRAMMED PLAYBACK (CD)
TRACK
• If it is in PBC ON status, using program playback will turn to PBC OFF automatically.
• According to the highlight area input the title and chapter number by the numeric buttons, press the
button to start; or move to the < PLAY > by the navigation buttons, press the ENTER button to start.
• While playing the program, you may press the PROGRAM button to display the program menu for edit.
To clear the program by moving to < CLEAR > by the navigation buttons, press the ENTER button.
Or press the button to end the program. When press the
button again, the disc will play by sequent.
• While playing the program, there will have an on screen indication “PRG PLAY” and the current title
and chapter number.
29
CD/DVD OPERATION
FAST FORWARD / FAST REVERSE
1.Press the
or
button when a disc is playing.
Each time the
or
button is pressed, the speed of fast scan changes in the following sequence:
FORWARD X 2 ---> FORWARD X 4 ---> FORWARD X 8 ---> FORWARD X 20 ---> PLAY
BACKWARD X 2 ---> BACKWARD X 4 ---> BACKWARD X 8 ---> BACKWARD X 20 ---> PLAY
2. Press the
button to play when you reach the desired point to resume playback at normal speed .
SLOW - MOTION PLAY ( DVD )
1. Press the SLOW button on remote control in the play mode. Each time the SLOW button is pressed,
the speed of slow-motion playback changes in the following sequence:
SF 1/2 ---> SF 1/3 ---> SF 1/4 ---> SF 1/5 ---> SF 1/6 ---> SF 1/7 ---> PLAY
2. Press the
button to return to the normal playback speed.
NOTE: During Slow motion, the sound will be off .
SUBTITLE SELECTION ( DVD )
1. While a DVD is playing, press the SUBTITLE button to display the current the language setting,
as shown in the example.
2. Press the SUBTITLE button repeatedly to select the desired subtitle language.
NOTE
• If only one language is recorded, the language does not change.
• About two seconds later, playback continues with the new subtitle you selected. I
• If no button is pressed within a few seconds, playback continues without changing the current subtitle.
• The number of languages recorded differs depending on the disc.
• This function can only be used for discs on which subtitles have been recorded in multiple languages.
LANGUAGE SELECTION ( DVD )
On some discs, the sound is recorded in two or more formats. Follow the directions below to select the
preferred language and sound system.
1. While a disc is playing, press the LANGUAGE button to show the current audio format number.
2. Press the LANGUAGE button repeatedly to select the desired audio format.
Note
• If only one audio format is recorded, the number does not change.
• About two seconds later, playback continues in the new audio format.
ANGLE SELECTION ( DVD )
Some DVDs contain scenes which have been shot from a number of different angles. For these
discs, the same scene can be viewed from each of these different angles.
1. While you are playing a DVD with different angles recorded, press the ANGLE button to view
the number of the current angle available.
2. Press the ANGLE button repeatedly to change the scene to the next angle in those recorded.
• About two seconds later, playback continues from the new angle you selected.
• If no button is pressed within 10 seconds, playback continues without changing the current angle.
Sequence of angle shots
(Example)
1/3
2/3
3/3
NOTE
This function can only be used for discs on which scenes shot from multiple angles have been recorded .
.
30
CD/DVD OPERATION
SPECIAL FUNCTIONS
DISPLAY function (DVD)
Using D. DISP , you can check the current settings of
the following items: ANGLE, AUDIO and SUBTITLE.
While the disc is playing , press the D .DISPLAY
button repeatedly to display information on
operation status .
LOCATING A SPECIFIC TITLE (DVD)
If a DVD contains title numbers, you can locate a specific title by directly selecting a title number.
1. Press the GOTO button.
2. Press the or button to highlight a specific
field and press the corresponding number
button(s) for the title you want.
3. Press the ENTER button to confirm. The Unit will start playback about 3 seconds later.
LOCATING A SPECIFIC CHAPTER / TRACK
If you know the chapter / track number you want to play, you can locate a
specific chapter / track by directly selecting a chapter / track number.
1. Press the GOTO button to search for your desired chapter / track .
2. Press the or button to highlight a chapter / track and press the corresponding number button(s)
for the chapter / track you want.
3. Press the ENTER button to confirm. Playback starts from the selected chapter / track .
LOCATING A SPECIFIC TIME
You can move to a specific location by entering its corresponding time (hours, minutes, seconds)
1. Press the GOTO button.
2. Press the
or button to highlight time.
3. Press the corresponding number buttons for the setting point you want.
4. Press the ENTER button to confirm. The Unit will start playback about 3 seconds later.
NOTE
• Some discs may not respond to this process.
• Some scenes may not be located as precisely as specified.
• This method for accessing specific locations is available only within the current title of the DVD.
31
CD/DVD OPERATION
DVD REPEATING
You can play a specific title or chapter repeatedly. (Title repeat, chapter repeat, A-B repeat)
REPEATING A CHAPTER
You can play the same chapter repeatedly.
1. While the disc is playing, press the REPEAT button until the
on the screen.
The current chapter is played repeatedly.
REPEATING A TITLE
You can play the same title repeatedly.
2. While the disc is playing, press the REPEAT button until the
The current title is played repeatedly.
TO RESUME NORMAL PLAYBACK
3. While the disc is playing, press the REPEAT button until the
indicator displays
indicator displays on the screen.
indicator displays on the screen.
CD REPEATING
You can play a single track and whole disc repeatedly.
REPEATING A SINGLE TRACK
You can play the same track repeatedly.
1. While the disc is playing, press the REPEAT button until the
The current track is played repeatedly.
REPEATING A WHOLE DISC
2. While the disc is playing, press the REPEAT button until the
The whole disc is played repeatedly.
TO RESUME NORMAL PLAYBACK
3. Press the REPEAT button until the
indicator displays on the screen.
indicator displays on the screen.
indicator displays on the screen.
REPEATING A SPECIFIC SECTION (DVD) (CD)
You can play a specific section repeatedly.
1. While the disc is playing, press the A-B button at the beginning of the section (
you want to play repeatedly.
2. Press the A-B button again at the end of the section (
is displayed).
3. The Unit will immediately begin replaying your selection.
TO RESUME NORMAL PLAYBACK
4. While the disc is playing, press the A-B button until the
is displayed)
indicator displays on the screen.
NOTE
• A-B repeat can only be used within the same title. If the start and end of the section to be repeated
are in different titles, A-B repeat is cancelled.
• The A-B repeat function does not operate in scenes where different camera angles are recorded.
32
CD/DVD OPERATION
MP3/JPEG PLAYBACK
After loading the MP3 / JPEG disc, it wil start to scan for the stored MP3 /JPEG folders.
Then will firstly display the MP3 contents automatically and start to play the first file (highlighted file).
Screen as follow:
MP3
MP3
01 MP3
01
02
03
04
05
06
07
08
09
10
Display current
MP3 playback
function
PICTURE
01 PICTURE
Display current
Picture playback
function
Highlight file for
current playback.
Buttons for switching
between MP3 and JPEG
playback function.
JPG
01
02
03
04
05
06
07
08
09
10
Scroll bar to view
next page.
Buttons for switching
between MP3 and JPEG
playback function.
Using the navigation buttons to check you folder and playback or move to the file.
NOTE:
• Press the
, buttons to move the highlight to folders, documents or mode selection.
• Press the numeric buttons to select the contents directly. For number over 10, press the 0 button first.
(e.g. File number 15, press 0 then 5.)
• When playback MP3 files, there is no picture display, only audio output.
• Playing the JPEG discs, press the PROGRAM button to select slide effects. There are 17 slide modes,
press the PROGRAM button to toggle among different modes in sequence.
(Wipe top, Wipe bottom, Wipe left, Wipe right, Diaginal wipe left top, Diaginal wipe right top, Diaginal
wipe left bottom, Diaginal wipe right bottom, Extend from center H, Extend from center V, Compress to
center H, Compress to center V, Window H, Window V, Wipe from else to center Random, None )
• When play or pause with picture playback , you may use the navigation buttons to flip / rotate the picture.
•
button to flip horizontally.
•
button to flip vertically.
•
button to rotate left 90˚.
•
button to rotate right 90˚.
Press the
/
buttons to select next / previous page or press numeric buttons to
view the corresponding pictures.
• The maximum JPEG image size that can be displayed is 1280 x 1024.
33
CUSTOMIZING THE DVD FUNCTION SETTINGS
DVD Function General setup
DVD SETUP MENU is only available in DVD mode. So before starting to set up please make sure the unit
is switched to the DVD mode.
Press the TV/AV button and use ▲ or ▼ button to highlight the DVD option, then press the Enter button
to enter into the DVD mode.
NOTE: In Setup mode, the following functions may be cancel or pause :
TITLE, SUBTITLE, DISPLAY, PLAY, PAUSE, STOP, SLOW , FF, FR, PREV, NEXT,
GOTO, ZOOM, ANGLE, LANGUAGE, PROGRAM, REPEAT, A-B.
SYSTEM SETUP
SYSTEM SETUP
TV SYSTEM
TV TYPE
PASS WORD
RATING
DEFAULT
EXIT SETUP
1 . Press the D.SETUP button to activate the DVD
player OSD menu.
2 . Use the ▲ or ▼ button to select the
SYSTEM SETUP menu , then press the
► button to enter the setting .
3 . Use the ▲ or ▼ button to select the options
( TV System , TV Type, Pass Word, Rating, Default,
Exit Setup) , then press the ► button to enter into
for detailed options and adjust them using
the ▲ or ▼ buttons .
4 . Press the ◄ button to return to previous
menu , repeat step 3 to adjust other settings .
5 . Press the D.SETUP button to exit the OSD menu,
or move the highlight to EXIT SETUP then press
the ENTER button to exit.
TV SYSTEM
SYSTEM SETUP
Select the TV system available.
TV SYSTEM
NTSC
TV TYPE
PAL
PASS WORD
AUTO
NOTE:
NTSC format is generally used for TVs.
RATING
Check your TV user guide for supported formats.
DEFAULT
If PAL is selected with a non-compatible television
EXIT SETUP
you may experience interference or picture
scrolling.
TV TYPE
SYSTEM SETUP
DVDs are produced in a variety of screen
aspect ratios. This menu enables you to select one
TV SYSTEM
TV TYPE
4 : 3PS
PASS WORD
4:3LB
RATING
16:9
of the three aspect ratios:
4:3 PS (Normal)
4:3 LB (Normal)
DEFAULT
16:9 (Wide)
EXIT SETUP
Select the most appropriate aspect ratio for the
DVD being viewed.
34
CUSTOMIZING THE DVD FUNCTION SETTINGS
4:3PS (Normal)
• When wide-screen video is played, this mode clips
the right and left sides of the image so that it can
be viewed on a conventional screen.
• Some wide-screen DVDs that do not permit
Pan Scan mode playback are automatically played
in letterbox mode (black bands top and bottom).
Cut off when a
wide-screen
video image
is played.
Pan Scan
4:3LB (Normal)
• When wide-screen video is played in this mode
on a conventional screen, black bands appear at
the top and bottom of the screen.
16:9 ( Wide Screen )
• This is the correct mode for playing wide-screen
videos on a wide-screen.
Letter Box
NOTE:
• The displayable picture size is preset on the DVD.
Therefore the playback picture of some DVDs
may not conform to the picture size select.
• When you play DVDs recorded in the 4:3 aspect
ratio, the playback picture will always appears in
the 4:3 aspect ratio regardless of the TV TYPE
setting.
• TV TYPE will always change to Wide screen
after you switch off the unit.
Wide-screen
PASS WORD
SYSTEM SETUP
The default setting is locked. No Rating selection or
TV SYSTEM
TV TYPE
change password could be done.
PASS WORD
To edit the Rating setting, please enter
RATING
default password “0000” by the numeric buttons,
DEFAULT
then press the ENTER button to confirm.
EXIT SETUP
To change password, input any 4 digit number when
the lock is unlocked. Once the 4 digit number
is entered, that will be your new password.
RATING
SYSTEM SETUP
Playback for some discs with rating, you can select
TV SYSTEM
1 KID SAFE
the rating setting according to your preference.
TV TYPE
2G
Rating restriction divided in eight different
PASS WORD
RATING
DEFAULT
EXIT SETUP
3 PG
4 PG13
5 PG - R
6R
7 NC - 17
8 ADULT
categor y from KID SAFE to ADULT.
NOTE:
Only editable when password is unlocked.
And only can function when password is locked.
It does not, however, reset either the Password
or the Rating setting.
35
CUSTOMIZING THE DVD FUNCTION SETTINGS
DEFAULT SETTING
SYSTEM SETUP
Press the ENTER button to restore factory default.
TV SYSTEM
It takes 3 - 5 seconds to reset the DVD settings to
TV TYPE
the factor y default .
PASS WORD
RATING
DEFAULT
RESTORE
EXIT SETUP
LANGUAGE SETUP
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
EXIT SETUP
LANGUAGE SETUP
1 . Press the D.SETUP button to activate the DVD
player OSD menu.
2 . Use the ▲ or ▼ button to select the
LANGUAGE SETUP menu , then press the
► button to enter the setting .
3 . Use the ▲ or ▼ button to select the options
( OSD Language , Audio Lang, Subtitle Lang,
Menu Lang, Exit Setup) , then press the ► button
to enter into for detailed options and adjust them
using the ▲ or ▼ buttons .
4 . Press the ◄ button to return to previous
menu , repeat step 3 to adjust other settings .
5 . Press the D.SETUP button to exit the OSD menu,
or move the highlight to EXIT SETUP then press
the ENTER button to exit.
OSD LANGUAGE
Use the navigation buttons to select the
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
EXIT SETUP
ENGLISH
GERMAN
SPANISH
FRENCH
PORTUGUESE
ITALIAN
OSD LANGUAGE setup icon, press the ENTER button
to confirm. There are 6 languages for your selection,
press the ▲ and ▼ buttons to switch among
different languages ( ENGLISH/GERMAN/SPANISH/
FRENCH/ PORTUGUESE /ITALIAN ) .
Press the ENTER button to confirm.
NOTE:
If the selected language is not included in you DVD
disc content, it will select the default language
of the disc automatically.
36
CUSTOMIZING THE DVD FUNCTION SETTINGS
AUDIO LANGUAGE
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
ENGLISH
GERMAN
SPANISH
FRENCH
PORTUGUESE
ITALIAN
Use the navigation buttons to select the
AUDIO LANG setup icon, press the ENTER button
to confirm. There are 6 languages for you selection,
press the ▲ and ▼ buttons to switch among
different languages. ( ENGLISH / GERMAN / SPANISH
/ FRENCH / PORTUGUESE / ITALIAN ).
EXIT SETUP
Press the ENTER button to confirm.
NOTE:
If the selected language is not included in you DVD
disc content, it will select the default language
of the disc automatically.
SUBTITLE LANGUAGE
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
ENGLISH
GERMAN
SPANISH
FRENCH
PORTUGUESE
ITALIAN
Use the navigation buttons to select the
SUBTITLE LANG setup icon, press the ENTER button
to confirm. There are 6 languages for you selection,
press the ▲ and ▼ buttons to switch among
different languages. ( ENGLISH / GERMAN / SPANISH
/ FRENCH / PORTUGUESE / ITALIAN ).
EXIT SETUP
Press the ENTER button to confirm.
NOTE:
If the selected language is not included in you DVD
disc content, it will select the default language
of the disc automatically.
MENU LANGUAGE
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
EXIT SETUP
ENGLISH
GERMAN
SPANISH
FRENCH
PORTUGUESE
ITALIAN
Use the navigation buttons to select the
MENU LANG setup icon, press the ENTER button
to confirm. There are 6 languages for you selection,
press the ▲ and ▼ buttons to switch among
different languages. ( ENGLISH / GERMAN / SPANISH
/ FRENCH/PORTUGUESE / ITALIAN ).
Press the ENTER button to confirm.
37
CUSTOMIZING THE DVD FUNCTION SETTINGS
AUDIO SETUP
1 . Press the D.SETUP button to activate the DVD
player OSD menu.
2 . Use the ▲ or ▼ button to select the
AUDIO SETUP menu , then press the
► button to enter the setting .
3 . Use the ▲ or ▼ button to select the options
( Audio Out , Tone, Exit Setup) ,
then press the ► button to enter into
for detailed options and adjust them using
the ▲ or ▼ buttons .
4 . Press the ◄ button to return to previous
menu , repeat step 3 to adjust other settings .
5 . Press the D.SETUP button to exit the OSD menu,
or move the highlight to EXIT SETUP then press
the ENTER button to exit.
AUDIO SETUP
TONE
EXIT SETUP
TONE
AUDIO SETUP
Use the ▲ and ▼ buttons to adjust the Tone setting.
TONE
#
+4
+2
EXIT SETUP
+0
-2
-4
b
38
CUSTOMIZING THE DVD FUNCTION SETTINGS
DIGITAL SETUP
Dolby Digital
Setup
1 . Press the D.SETUP button to activate the DVD
player OSD menu.
2 . Use the ▲ or ▼ button to select the
DIGITAL SETUP menu , then press the
► button to enter the setting .
3 . Use the ▲ or ▼ button to select the options
( Dynamic Range , Dual Mono, Exit Setup) ,
then press the ► button to enter into
for detailed options and adjust them using
the ▲ or ▼ buttons .
4 . Press the ◄ button to return to previous
menu , repeat step 3 to adjust other settings .
5 . Press the D.SETUP button to exit the OSD menu,
or move the highlight to EXIT SETUP then press
the ENTER button to exit.
DIGITAL SETUP
DYNAMIC RANGE
DUAL MONO
EXIT SETUP
DIGITAL SETUP
DYNAMIC RANGE
DYNAMIC RANGE
FULL
When switch the compress mode to
DUAL MONO
6/8
“Audio output”, adjust the compressed ratio
4/8
for different effect.
2/8
When selected FULL, the peak signal value
OFF
is smallest.
EXIT SETUP
When selected OFF, the peak signal value
is highest.
DUAL MONO
DIGITAL SETUP
You can select four different audio output,
DYNAMIC RANGE
DUAL MONO
EXIT SETUP
STEREO
STEREO , MONO L , MONO R , MIX MONO .
MONO L
The audio out description of these
MONO R
selections is shown in the table below.
MIX MONO
MODE
LEFT SPEAKER
RIGHT SPEAKER
STEREO
STEREO-L
STEREO-R
L-MONO
L-MONO
L-MONO
R-MONO
R-MONO
R-MONO
MIX-MONO
L-MONO+R-MONO
L-MONO+R-MONO
39
DISPLAY MODE
PC FORMATS
Vertical
Horizontal
Resolution Scanning Frequency Scanning Frequency
(KHz)
640
480
640
480
640
480
800
600
800
600
800
600
800
600
1024
768
1024
768
1024
768
1366
768
Format
(Hz)
47.7
NOTE:
This product does not support the display mode not listed above.
In order to achieve the best display effect, please select the above-listed
11 display modes input signal.
● Because of the difference of display drivers output signal
(especially non-standard signal output), the display image may appear little
disturbance which can be adjusted through “AUTO” button on the PC menu.
● To prolong this unit’s service life, please set your computer to power management
mode.
●
40
DISPLAY MODE
VIDEO FORMATS
SUPPORTED COMPONENT / HDMI INPUT MODE
Vertical
Horizontal
Resolution Scanning Frequency Scanning Frequency
(KHz)
(Hz)
Format
720
480
31.47
59.94
480 i
720
480
15.734
59.94
480 p
720 p
1280
720
37.5
50
1280
720
45
60
720 p
1920
1080
31.25
50
1080 i
1920
1080
33.75
60
1080 i
NOTE:
The above listed formats are also related to the AV devices you are about to connect.
Before you connect this unit with others please read all instructions carefully and
make sure all necessary cables are connected.
● This unit may be incompatible with some other formats which are not meet the
above conditions.
●
.
41
SPECIFICATION
19" LCD TV / DVD COMBO
Model Description
Panel Type
Diagonal Size
Screen Format
Resolution
Panel
Brightness
Contrast
View Angle
Response Time
Maximum Color
Color System
Sound System
Systems
Audio System
Sound Output
RF Input
HDMI Input
PC-RGB Input
Input/
Output
Jacks
S-Video Input
Composite Video Input
Component/Y Pb Pr Input
Sound Input
DVD
Others
L/R Speaker: 2W + 2W
75 ohm external terminal
Video: 480i, 480p, 720p, 1080i
Audio: Two channel linear PCM 32, 44.1 and 48kHz, 16, 20 and 24 bits
D-sub 15pin
G: 0.7Vp-p, 75ohms
B: 0.7Vp-p, 75ohms
R: 0.7Vp-p, 75ohms
Y: 1.0Vp-p, 75ohms
C: 0.3Vp-p, 75ohms
1.0 Vp-p, 75ohms RAC
RAC
Y: 1.0 Vp-p, 75ohms, 0.3V negative sync
Pb: 0.7Vp-p, 75ohms
Pr : 0.7Vp-p, 75ohms
Phono jack 1: For CVBS/Component Audio input
Phono jack 2: For PC-RGB Audio input
500mV rms, Impedance: 20k ohms
Headphone Output
3.5 mm diameter jack
Region Code
Disc Size
1
Compatible Disc Type
Power
TFT LCD
18.5 inches / 47 cm
16:9
1366
768
300 nit
1000 : 1
170 ( H) / 160 ( V)
5 ms
16.7 M
ATSC/QAM/NTSC
M
BTSC
Power Requirement
Power Consumption
8cm / 12cm disc
DVD , DVD - R / + R , DVD - RW / + RW , VCD , CD , CD - R , CD - RW
AC 120V, 60Hz
Standby Consumption
≤
≤
Dimension(with stand)
Weight
Approx. 460(L)
4, 8 Kg
Supplied Accessory
Power Cord, Instruction Manual, Remote Control, Warranty Card, Batteries
80W
3W
160(W)
394(H) mm
* This manual is only for your reference.
Specifications are subject to update without prior notice.
42
TROUBLESHOOTING GUIDE
SYMPTOM
CAUSE (AND REMEDY)
No power.
• Make sure the AC power cord is connected.
• Turn on the unit.
The remote does not
function.
• Remove any obstacles between the remote and the unit.
• Use the remote near the unit.
• Point the remote at the remote sensor on the unit.
• Replace the batteries in the remote with new ones.
DVD
No sound or only a
very low-level sound is
heard.
• Make sure that you’ve selected DVD mode.
button to return to
• The system is in pause mode.Press the
normal play mode.
button
• Fast forward or fast reverse is performed.Press the
to return to normal play mode.
• Make sure the AUDIO / VIDEO output and AV IN input
connections are correct.
• This unit is too hot. Power off the unit for 30 minutes to cool
down.
No picture
• The region number of the disc doesn’t match the region number
of this unit.
The picture is not clear
• Clean the disc.
Severe hum or noiseis
heard.
• The plugs and jacks are dirty.Wipe them with a cloth slightly
moistened with alcohol.
• The disc is scratched
• Clean the disc
The disc does not play.
• There is no disc inside(“No Disc”appears on the screen).
• Insert the disc correctly with the label side facing yourself.
• Clean the disc.
• A non-NTSC disc has been inserted.The unit and disc region
number are incompatible.
• Condensation may have formed inside the unit due to a
sudden change in temperature.Wait about an hour for it to
clean and try again.
43
TROUBLESHOOTING GUIDE
CAUSE (AND REMEDY)
SYMPTOM
TV
Bad Picture (snow,
multiple images
distortion,blurry)
No sound.
•
•
•
•
•
Check the location of the antenna and adjust it if necessary.
Make sure the antenna cable is firmly connected.
Make sure all input cables are firmly connected.
Increase the volume.
Check whether the mute function has been activated on the
Remote Control.
Black and White
picture.
• Check the PICTURE setting within the PICTURE menu.
• Check to make sure the program you are watching is broadcast
in Color and not Black & White.
No picture or sound.
•
•
•
•
•
•
Coloredpatches of
picture.
• Make sure there are no unshielded electrical devices nearby
that are causing interference.
Make sure the unit is plugged in and turned on.
Make sure that the ATV mode is selected.
Try a new channel to check for possible station trouble.
Make sure the antenna is connected properly.
Increase the volume.
Make sure the antenna or audio/video source device is
working properly.
• Make sure all cables are firmly connected.
• Check for local interference.
• Turn the TV off for 30 minutes, then try it again.
Panel function key does • Under the influence of electrostatic phenomenon, the product
not respond correctly.
may malfunction and require usertopowerreset.
• Unplug and re-plug the AC power cord.
The display monitor's
panel goes hot.
• LCD TV takes inside lighten phosphor. It may increase the
temperature of the screen in some occasions. It's not a defect.
Unusual dots
• Black dots and Bright points may appear on the LCD screen.
This is a structural property of the LCD panel and is not a defect.
Stripes on screen
• Adjust the impulse phase may decrease stripes.(RGB in)
The top of the monitor
gets hot .
• It may occur during long-time working. It's not a defect.
Unable to select a
certain channel.
• The channel may be skipped. Choose this channel by
directly selecting the buttons from the remote control.
Disorder display
at power on.
• This may be caused because of a very short interval
between POWER OFF and ON.
• Unplug the power and restart.
44