Owner`s manual | Curtis TVD2000A TV DVD Combo User Manual

OWNER'S MANUAL
TVD2000A
ATSC TV/DVD COMBO
POWER
TV/AV
TV/DTV
Q.VIEW
INFO
1
2
TV/DVD OPEN/CLOSE
3
5
6
7
9
0
MUTE
4
8
-
CC
P.MODE
SAP
CH+
VOL
_
MENU
VOL
+
OK
S.MODE
CHSTOP
REV
SETUP PAUSE/STEP SUBTITLE
PREV
FWD .
D.MENU
REPEAT
NEXT
A-B
SLOW
PLAY/ENTER
TITLE/PBC SEARCH
ANGLE
PROGRAM
ZOOM
D.CALL
10+
EXIT
ARC
GUIDE
CH.LIST
FAV.LIST
AUDIO
Before operating the unit, please read this manual thoroughly.
PRECAUTIONS
FCC WARNING-This equipment may generate
or use radio frequency energy. Changes or
modifications to this equipment may cause
harmful interference unless the modifications
are expressly approved in the instruction
manual. The user could lose the authority
to operate this equipment if an unauthorized
change or modification is made.
LASER SAFETY
This unit employs a laser. Only a qualified
service person should remove the cover
or attempt to service this device, due to
possible eye injury.
CAUTION: USE OF CONTROLS OR
ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION
EXPOSURE.
CAUTION: VISIBLE AND INVISIBLE
LASER RADIATION WHEN OPEN AND
INTERLOCK DEFEATED. DO NOT
STARE INTO BEAM.
LOCATION:INSIDE,NEAR THE DECK
MECHANISM.
CONTENTS
Before Operation
Important Safety Instructions............................................................ 1
Installation........................................................................................... 5
Antenna Connection.......................................................................... 5
Preparation of the remote control...................................................... 5
Function buttons and External Connections................................... 6
Front panel of the TV set.................................................................. 6
Rear panel of the TV set.................................................................... 7
Using the remote control................................................................... 8
The other video and audio equipment ................................................. 9
Antenna connections ........................................................................... 10
Cable TV connections ......................................................................... 11
Connections the other equipment ....................................................... 12
Basic operation
Setting the language and blue screen .................................................
Channel menu .....................................................................................
Channel selection ................................................................................
Volume adjustment .............................................................................
Screen information ..............................................................................
Video menu ........................................................................................
Manual time setting ............................................................................
Setting the ON/OFF timer ..................................................................
Function menu ...................................................................................
Closed caption ...................................................................................
DTV setup menu ................................................................................
Other functions ...................................................................................
13
14
16
17
18
19
21
22
23
28
29
34
DVD Operation
DVD Features...................................................................................
Special Playback Functions..............................................................
DVD System Setup..........................................................................
Playable Discs...................................................................................
Disc Protection and DVD Characteristics..........................................
Others
Troubleshooting guide........................................................................
Specifications .....................................................................................
Warranty ............................................................................................
1
36
38
39
43
44
45
46
47
IMPORTANT SAFEGUARDS
WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
This symbol indicates that dangerous
voltage constituting a risk of electrical
shock is present in this unit.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL
This symbol indicates there are important
operating and maintenance instructions
in packaged with this product.
Caution - Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure
Product complies with radiation performance standards under the Federal Food, Drug and Cosmetic Act
1. READ THESE INSTRUCTIONS
All the safety and operating instructions should be read before the unit is operated.
2. KEEP THESE INSTRUCTIONS
The safety and operating instructions should be retained for future reference.
3. HEED ALL WARNINGS
All warnings on the unit and in the operating instructions should be adhered to.
4. FOLLOW ALL INSTRUCTIONS
All operating and use instructions should be followed.
5.CLEAN ONLY WITH DRY CLOTH.
Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning the exterior cabinet only.
6. DO NOT BLOCK ANY VENTILATION OPENINGS. INSTALL IN ACCORDANCE WITH THE
MANUFACTURER`S INSTRUCTIONS.
7. DO NOT USE THIS APPARATUS NEAR WATER
Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
PORTABLE CART WARNING
(symbol provided by RETAC)
9. Only use attachments/accessories specified by the manufacturer.
10.Use only with the cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
11. VENTILATION
Slots and openings in the cabinet back or bottom are provided for ventilation,
S3126A
to ensure reliable operation of the unit, and to protect it from overheating.
These openings must not be blocked or covered. The openings should never be blocked by placing the unit
on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat
source. This unit should not be placed in a built-in installation such as a bookcase or rack unless proper
ventilation is provided and/or the manufacturer`s instructions have been adhered to.
12. POWER SOURCES
This unit should be operated only from the type of power source indicated on the rating plate. If you are not
sure of the type of power supply to your home, consult your appliance dealer or local power company. For
units intended to operate from battery power, or other sources, refer to the operating instructions.
2
Important safety Instructions
13. GROUNDING OR POLARIZATION
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not
fit into your outlet, consult an electrician for replacement of the obsolete outlet.
14. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
15. Unplug this apparatus during lightning storms or when unused for long periods of time.
16. Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
17. POWER LINES
An outside antenna system should not be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can fall onto or against such power lines or
circuits. When installing an outside antenna system, extreme care should be taken to keep
from touching such power lines or circuits, as contact with them might be fatal.
18. OVERLOADING
Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric
shock.
19 . OBJECT AND LIQUID ENTRY
Do not push objects through any openings in this unit, as they may touch dangerous voltage
points or short out parts that could result in fire or electric shock. Never spill or spray any
type of liquid into the unit.
20. OUTDOOR ANTENNA GROUNDING
If an outside antenna or cable system is connected to the unit, be sure the antenna or cable
system is grounded to provide some protection against voltage surges and built-up static
charges, Section 810 of the National Electrical Code (NEC), ANSI/NFPA 70, provides
information with respect to proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding electrodes, and requirements
for the grounding electrode.
21. SERVICING
Do not attempt to service this unit yourself as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
3
Important safety Instructions
22. DAMAGE REQUIRING SERVICE
Unplug this unit from the wall outlet and refer servicing to qualified service personnel under
the following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the unit.
c. If the unit has been exposed to rain or water.
d. If the unit does not operate normally by following the operating instructions. Adjust
only those controls that are covered by the operating instructions, as an improper
adjustment of other controls may result in damage and will often require extensive
work by a qualified technician to restore the unit to its normal operation.
e. If the unit has been dropped or the cabinet has been damaged.
f. When the unit exhibits a distinct change in performance, this indicates a need for
service.
23. REPLACEMENT PARTS
When replacement parts are required, be sure the service technician uses replacement parts
specified by the manufacturer or those that have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
24. SAFETY CHECK
Upon completion of any service or repairs to this unit, ask the service technician to perform
safety checks to determine that the unit is in proper operating condition.
25. HEAT
The product should be situated away from heat sources such as radiators, heat registers,
stoves, or other products (including amplifiers) that produce heat.
26. DISC SLOT
Keep your fingers well clear of the disc slot as it is closing. It may cause serious personal
injury.
27. CONNECTING
When you connect the product to other equipment, turn off the power and unplug all of the
equipment from the wall outlet. Failure to do so may cause an electric shock and serious
personal injury. Read the owner's manual of the other equipment carefully and follow the
instructions when making any connections.
28. SOUND VOLUME
Reduce the volume to the minimum level before you turn on the product. Otherwise, sudden
high volume sound may cause hearing or speaker damage.
29. SOUND DISTORTION
Do not allow the product output distorted sound for a longtime. It may cause speaker
overheating and fire.
30. LASER BEAM
Do not look into the opening of the disc slot or ventilation opening of the product to see the
source of the laser beam. It may cause sight damage.
31. DISC
Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may
cause serious personal injury and product malfunction.
32. NOTE TO CABLE TV SYSTEM INSTALLER
This reminder is provided to call the Cable TV system installer's attention to Article 820-40 of
the NEC that provides guidelines for proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system of the building, as close to the point
of cable entry as practical.
4
Installation
Antenna connection
If the picture is not clear or is snowy, it is recommended that an External Aerial
is used, this is usually mounted outside.
300
twin-lead cable
Antenna adapter
(Not supplied)
Aerial input
75 standard
coaxial type
75 coaxial cable
Plug
(Not supplied)
AC power socket
Note:
* It is recommended that a 75 ohm coaxial antenna is used to avoid
interference.
*To avoid interference from electrical signals, do not bind the antenna
cable together with any mains lead.
Preparation for the remote control
Battery installation
Remove the battery cover.
Insert two size AA batteries matching
the +/-polarities of the battery to the +/marks inside the battery compartment.
Tips for remote operation
When the remote control will not be used for a long period of time or when the
batteries are worn out, remove the batteries to prevent leakage.
Do not throw the batteries into fire. Dispose of used batteries in the specified
manner.
Do not drop, dampen or disassemble the remote control.
5
Parts and functions
Front panel the TV set
POWER
Power Indicator
Signal Receiver
Power Switch
The DVD Player
Video
Menu
R/L
Audio
TV/AV/DVD
Switching
Channel Position
up/down
Play
the DVD
Open/close
the DVD
Volume up/ down
Stop
the DVD
Remote Receiving TV/AV/DVD
Switching
Window
Stop
Power Button
Power Indicator
Signal Receiver Power Switch
OPEN/CLOSE PLAY
Video
Audio
STOP
CH-
CH+
VOL-
VOL+
MENU
Earphone
Open/close
the DVD
VIDEO L/MONO-AUDIO/R EARPHONE
6
Play
Channel Position
Stop
the DVD the DVD up/down
Volume up/ down
Menu
TV/AV/DVD
Switching
Parts and functions
Remote Receiving
Window
Power Button
PLAY/PAUSE
OPEN/CLOSE
MENU
VOL-
VOL+
STOP
CH-
SKIP-
SKIP+
CH+
Rear panel of the TV set
Video Y input terminal
COAXIAL
OUTPUT
Y
COMPONENT
Cb
Cr
COAXIAL OUTPUT
Video output terminal
Audio left channel output terminal
OUT
IN
VIDEO1
Video Cb input terminal
Video Cr input terminal
Antenna input socket
Audio right channel output terminal
Audio right channel input terminal
L
R
AUDIO1
Video 1
6
7
Audio left channel input terminal
Using the Remote Control
Buttons on the remote control
Power Switch
Open/close DVD Tray
POWER
TV/AV
TV/DVD OPEN/CLOSE
TV/DTV
Q.VIEW
TV / AV Mode Selection
TV / DTV Mode Selection
INFO
MUTE
TV / DVD Mode Selection
Mute Sound
1
2
3
4
Q.VIEW button: Return to Previous Channel
5
6
7
8
Channel / Track Selection
-
CC
9
0
On Screen Display
SAP button: Second Audio Program
CC Mode Selection: Closed captioning (selects mode).
- button: select additional channels being broadcasted.
For example, to select channel “54-3”, press “54”, “-”, “3”,
and then press “OK”.
P.MODE
SAP
CH+
P.MODE (picture mode): Adjust Picture Mode
Volume/Channel Adjusting
VOL
_
VOL
+
MENU
OK
Go to TV Menu
Exit On Screen Display
SLEEP
TV Sleep button
CH-
CH.LIST (channel list)
CH.LIST
FAV.LIST
SIZ
GUIDE
GUIDE reference (may not operate using some systems)
FAV.LIST (favorite list) Enter
STOP
SETUP PAUSE/STEP SUBTITLE
SIZ: Aspect Ratio Control under 16:9 digital signal input
DVD STOP Playback
REV
FWD
PREV
NEXT
REPEAT
A-B
DVD SETUP
DVD FAST REVERSE
D.MENU
DVD CAPTION (SUBTITLE) Selection
DVD PAUSE/STEP
SLOW
PLAY/ENTER
DVD PREVIOUS Chapter / Track
DVD FAST FORWARD
TITLE/PBC SEARCH
ANGLE
DVD NEXT Chapter / Track
DVD MENU
AUDIO
PROGRAM
10+
CLR
ZOOM
D.CALL
DVD A-B REPEAT
DVD Playback / Confirm Menu Selection
UP
DVD REPEAT Mode
DVD Cursor Move button
DVD SLOW
DVD ANGLE Change
DVD SEARCH
DVD TITLE
DVD AUDIO Mode
DVD INFORMATION
DVD PROGRAM
Zoom Function
10+
CLR: clear
8
LEFT
RIGHT
DOWN
The other video and audio equipment Connections
You can connect the DVD,VCR and stereo system to the output to enjoy a
higher quality of picture and sound effect.
Amplifier
To COAXIAL
type digital
audio input
Coaxial cable
ANT IN
COAXIAL OUT
1
9
1
Antenna connections
If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna
system. If you are using a cable TV service (CABLE), see the Cable TV connections.
Combination VHF/UHF antenna (Single 75 ohm cable or 300 ohm twin-lead wire)
Connect the 75 ohm cable from the combination
VHF/UHF antenna to the RF IN jack.
RF IN
jack
RF IN
jack
75 ohm
coaxial
cable
If using a flat UHF 300 ohm twin-lead wire,
connect these flat wires to an optional 75/300
ohm matching transformer/adapter (available
at many retailers), and then connect the
adapter to the 'RF' IN connector on the back
of the television.
300-75 ohm
matching
transformer
Combination VHF/UHF antenna (Separate VHF and UHF 300 ohm twin-lead wires)
Connect the UHF 300 ohm twin-lead wire to the
combiner (not supplied). Connect the VHF 300
ohm twin-lead wire to the 300-75 ohm matching
transformer. Attach thetransformer to the combiner,
then attach the combiner to the RF IN jack.
300-75 ohm
matching
transformer
RF IN
jack
Combiner
UHF 300 ohm
VHF 300 ohm
Separate VHF/UHF antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires)
Connect the VHF 75 ohm cable and UHF 300 ohm
twin-lead wire to the combiner. Attach the combiner
to the RF IN jack.
RF IN
jack
VHF 75 ohm
Combiner
UHF 300 ohm
10
Cable TV connections
This unit has an extended tuning range and can tune most cable channels without using a Cable TV
Converter box. Some cable companies offer "premium pay channels" in which the signal is
scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device
which is generally provided by the cable company.
FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE
RF IN
jack
For basic cable service not requiring a Converter/Descrambler
box, connect the 75 ohm Coaxial Cable directly to the RF IN
Jack on the back of the unit.
75 ohm
coaxial cable
FOR SUBSCRIBERS TO SCRAMBLED CABLE TV SERVICE
If you subscribe to a cable TV service which requires the use of a converter/descrambler box, connect the
incoming 75 ohm coaxial cable to the converter/descrambler box. Using another 75 ohm coaxial cable, connect
the output jack of the converter/descrambler box to the RF IN jack on the unit. Follow the connections shown
below. Set the unit to the output channel of the converter/descrambler box (usually channel 3 or 4) and use the
converter/descrambler box to select channels.
Incoming
75 ohm
cable TV cable
75 ohm cable to
unit
Converter/
descrambler
RF IN
jack
FOR SUBSCRIBERS TO UNSCRAMBLED BASIC CABLE TV SERVICE WITH
SCRAMBLED PREMIUM CHANNELS
If you subscribe to a cable TV service in which basic channels are unscrambled and premium channels require the
use of a converter/descrambler box, you may wish to use a signal splitter and an A/B switch box (available from the
cable company or an electronics supply store). Follow the connections shown below. With the switch in the "B"
position, you can directly tune any nonscrambled channels on your unit. With the switch in the "A" position, tune your
unit to the output of the converter/descrambler box (usually channel 3 or 4) and use the converter/descrambler box
to tune scrambled channels.
Incoming
75 ohm
cable TV cable
Converter/
descrambler
Splitter
A/B switch
11
A
75 ohm cable
to unit
B
RF IN
jack
Connections to other equipment
Using the audio/video inputs
If you connect the TV to a camcorder or Video Game, you can select different modes by pressing TV/AV.
Press TV/AV repeatedly to select the desired mode.
"AV1", "AV2" ,"COMPONENT","DVD" or TV channel will display on the screen for 4 seconds,
will be displayed on the screen when no signal input.
AV1
AV2
COMPONENT
DVD
TV Channel
no signal
AV 1
To connect the TV to a camcorder
To playback from the camcorder, connect the camcorder to the unit as shown.
Camcorder
Front of TV
VIDEO IN
To Audio/Video OUT
AUDIO IN (R)
AUDIO IN (L)
Audio/Video cord (not supplied)
To connect the TV to a Video Game
The TV can also be used as a display device for many video games. However, due to the wide variety
of formats, they have not all been included in the suggested connection diagram. Youl need to consult
each component's Owner's Manual for additional information.
VIDEO IN
Front of TV
Video Game
AUDIO IN (R)
To Audio/Video OUT
AUDIO IN (L)
Audio/Video cord (not supplied)
12
Setting the language and blue screen
You can choose from three different
languages (English, French and
SETTING
Spanish) for the on-screen displays.
THE LANGUAGE
1 Press POWER (
POWER
TV/AV
TV/DVD OPEN/CLOSE
TV/DTV
Q.VIEW
INFO
MUTE
1
2
3
4
5
6
7
8
9
-
0
) to turn on the TV.
2 Press MENU , and then
press VOL+/- button to
select FUNCTION menu,
then press CH- button to
enter.
0101
FUNCTION
LANGUAGE
BLUE SCREEN
NTSC CAPTION
PARENTAL LOCK
ENGLISH
ON
C1
CC
P.MODE
SAP
CH+
VOL
_
3 Press CH+/- button to select the LANGUAGE option,
VOL
+
MENU
OK
SLEEP
CHCH.LIST
STOP
REV
FAV.LIST
SIZ
then press VOL+/- to select the desired language:
English, Spanish or French.
GUIDE
SETUP PAUSE/STEP SUBTITLE
FWD
D.MENU
PREV
NEXT
REPEAT
A-B
SLOW
PLAY/ENTER
TITLE/PBC SEARCH
ANGLE
AUDIO
PROGRAM
10+
CLR
4 Press MENU until the MENU screen disappears.
ZOOM
SETTING THE BLUE SCREEN
D.CALL
1 Press MENU , and then
press VOL+/- button to
select FUNCTION menu,
then press CH- button to
enter.
0101
FUNCTION
LANGUAGE
BLUE SCREEN
NTSC CAPTION
PARENTAL LOCK
ENGLISH
ON
C1
2 Press CH+/- button to select
the BLUE SCREEN option,
then press VOL+/- to select OFF or ON .
3 Press MENU until the MENU screen disappears.
13
Channel menu
Here describes the case for searching and memorizing channels for DTV/ATV.
POWER
TV/AV
TV/DTV
Q.VIEW
INFO
MUTE
1
2
3
4
5
6
7
8
9
TV/DVD OPEN/CLOSE
-
0
CH+
VOL
+
MENU
OK
STOP
REV
FAV.LIST
SIZ
D.MENU
PREV
NEXT
REPEAT
A-B
CHANNEL menu, then press CH- button to enter.
2 Press CH+/- button to
select the RECEPTION
option.
SLOW
PLAY/ENTER
TITLE/PBC SEARCH
ANGLE
Be sure that antenna or cable is connected properly before plugging the
power cord.
GUIDE
SETUP PAUSE/STEP SUBTITLE
FWD
NOTE:
1 Press MENU , and then press VOL+/- button to select
SLEEP
CHCH.LIST
AUTO SCAN (CATV)
(When using basic cable)
The channels broadcasted in CATV are automatically
scanned and memorized.
CC
P.MODE
SAP
VOL
_
AUTO SCAN (DTV/ATV)
(When using antenna)
The channels broadcasted in DTV and ATV are
automatically scanned and memorized. Only the
receivable channels in the area where this TV is
used will be memorized.
3 P ress VOL +/- button
to select AIR/ CABLE.
AUDIO
PROGRAM
10+
CLR
ZOOM
0101
CHANNEL
SKIP
RECEPTION
AUTO SCAN
COLOR SYSTEM
OFF
AIR
AUTO
D.CALL
4 P ress CH +/- button
Only in analog signal
to select AUTO SCAN option.
5 P ress VOL+ button to start scanning.
When you press VOL+ on the remote control,
scanning the channels in both analog and digital
modes will automatically start.
When scanning is completed, the memorized
smallest channel will be displayed.
When you press MENU button while scanning, the
scanning is interrupted and the memorized smallest
channel is displayed.
14
Channel menu
SETTING SKIP
After the programs are presetting, you can skip some
programs so that to select your favorite channels only.
1 Press MENU , and then
press VOL+/- button to
select CHANNEL menu,
then press CH- button to
enter.
POWER
TV/AV
TV/DVD OPEN/CLOSE
TV/DTV
Q.VIEW
INFO
MUTE
1
2
3
4
5
6
7
8
9
-
0
CH+
REV
AUTO
select the SKIP option,
then press VOL+/- button
to select ON or OFF .
NOTE: When tuning DTV channels and no signal is present,
the SKIP-over option will be available.
SLEEP
If you want to recover the skipped channel
CH-
STOP
OFF
AIR
VOL
+
MENU
OK
CH.LIST
CHANNEL
SKIP
RECEPTION
AUTO SCAN
COLOR SYSTEM
CC
P.MODE
SAP
VOL
_
2 Press CH+/- button to
0101
FAV.LIST
SIZ
GUIDE
SETUP PAUSE/STEP SUBTITLE
FWD
D.MENU
PREV
NEXT
REPEAT
A-B
1. Use Direct-digit Choosing button to select the number
of the channel to be recovered.
2. Do the above steps again.
3. Press VOL+/- button to set SKIP as Off .
SLOW
PLAY/ENTER
TITLE/PBC SEARCH
ANGLE
AUDIO
PROGRAM
10+
CLR
ZOOM
D.CALL
SETTING COLOR SYSTEM(only in ATV mode)
1 Press MENU , and then
press VOL+/- button to
select CHANNEL menu,
then press CH- button to
enter.
2 Press CH+/- button to
select the COLOR
SYSTEM option, then
press VOL+/- button
to select AUTO or NTSC .
15
0101
CHANNEL
SKIP
RECEPTION
AUTO SCAN
COLOR SYSTEM
OFF
AIR
AUTO
Channel selection
You can select the channel by using either CH +/- button
or Channel number buttons. How to select the channel
in each way is shown below.
1 Using CH +/- button
POWER
TV/AV
TV/DTV
Q.VIEW
INFO
MUTE
1
2
3
4
5
6
7
8
9
TV/DVD OPEN/CLOSE
-
0
VOL
+
OK
STOP
REV
FAV.LIST
SIZ
GUIDE
SETUP PAUSE/STEP SUBTITLE
FWD
D.MENU
Press 2-9 as needed.
Example, to select channel 2, press "2".
10-69: Press the 2 digits in order. If you select the channel more than 69,
the channel will not be change, it is no available.
CABLE Mode Direct Channel Selection
SLEEP
CHCH.LIST
Antenna Mode Direct Channel Selection
When the Antenna/Cable menu option is in the Antenna position, all channels
can be instantly selected by using digits button. For example:
2-9:
CH+
MENU
2 Press the Direct Channel selection buttons to select the channel.
CC
P.MODE
SAP
VOL
_
Using CH +/- button on the remote control, change the channel.
Same operation is available with CH +/- button on the front panel
of the main unit.
PREV
NEXT
REPEAT
A-B
When the Antenna/Cable menu option is in the Cable position, channels
can be selected as follows:
1-9: Press 1-9 as needed. Example, to select channel 2,
press "2".
10-99: Press the 2 digits in order. Example, to select channel 32,
press "3" then "2".
100-125: Press the digital 1 button, the "1--" will appear
on the screen, then press the 2 digits of remain in order.
SLOW
PLAY/ENTER
AUDIO
PROGRAM
10+
CLR
ZOOM
CABLE
VHF
2-13
STD/HRC/IRC
14-36
(A) (W)
37-59
(AA) (WW)
60-85
(AAA) (ZZZ)
86-94
(86) (94)
95-99
(A-5) (A-1)
100-125
(100) (125)
01
(5A)
TV
VHF
2-13
UHF
14-69
TITLE/PBC SEARCH
ANGLE
D.CALL
NOTE:
In the DTV broadcasting, one channel sometimes broadcasts
multiple programs depending on the air time. In this case, the
main channel is called major channel and the sub channel is
called minor channel.
16
Volume adjustment
This section describes how to adjust the volume when
viewing TV. The MUTE function, which is useful when
you have a visitor or a phone call, will be also described.
1 Using VOL +/- button
POWER
TV/AV
TV/DTV
Q.VIEW
INFO
MUTE
1
2
3
4
5
6
7
8
9
TV/DVD OPEN/CLOSE
-
0
CC
P.MODE
SAP
CH+
VOL
_
VOL
+
MENU
OK
STOP
REV
2 Using MUTE button
Press MUTE button on the remote control to mute the
sound.
The colored volume bar is displayed on the screen while
muting.
SLEEP
CHCH.LIST
You can adjust the audio volume with VOL +/- button on
the remote control.
The volume bar is displayed at the bottom of the screen
when adjusting the volume.
Same operation is available with VOL +/- on the front
panel of the main unit.
FAV.LIST
SIZ
GUIDE
SETUP PAUSE/STEP SUBTITLE
FWD
D.MENU
PREV
NEXT
REPEAT
A-B
SLOW
PLAY/ENTER
TITLE/PBC SEARCH
ANGLE
AUDIO
PROGRAM
10+
CLR
ZOOM
To release the MUTE status, press MUTE button again
or press VOL+ button .
MUTE will displayed continuously When CC is OFF, MUTE
will disappeared 5 seconds later When CC is ON.
SWITCHING AUDIO
This section describes how to switch the audio language
in the digital mode.
D.CALL
2 Switch the audio language.
When you press SAP button on the remote control, the
currently selected language and the number of received
languages will be displayed on the screen.
Every time you press SAP button on the remote control,
the language will be switched.
Languages you can switch differ depending on the
receiving broadcast.
NOTE:
Pressing the SAP button works only with the some TV
channels, and does not work with external equipment such as
DVD players.
17
Screen information
You can display the currently selected channel number or
other information such as the audio mode on the screen
for checking.
POWER
TV/AV
TV/DTV
Q.VIEW
INFO
MUTE
1
2
3
4
5
6
7
8
9
TV/DVD OPEN/CLOSE
-
0
CC
VOL
_
VOL
+
MENU
OK
SLEEP
CH-
REV
To clear the display, press INFO button again.
In the digital mode, the detailed information for the
currently selected channel such as the program
GUIDEe is displayed.
CH+
STOP
13
AUTO
P.MODE
SAP
CH.LIST
In the analog mode, the currently selected channel
number and the audio mode are displayed.
1 Display the channel number and the audio mode.
Press INFO button on the remote control.
The currently selected channel number and the audio
mode are displayed at the top right of the screen.
FAV.LIST
SIZ
GUIDE
SETUP PAUSE/STEP SUBTITLE
FWD
D.MENU
PREV
NEXT
REPEAT
A-B
Display the detailed information for the channel.
Every time you press INFO button , the display mode
will be switched as below.
INFORMATION
14.1
DTV-AIR
ENCODE
4
5
6
SLOW
PLAY/ENTER
17:00-18:30
9.2
America Masters
ENGLISH
1/3
CC
1
2
3
Satchmo: The Life of Lauis
Armstrong A self-taught
TITLE/PBC SEARCH
ANGLE
AUDIO
PROGRAM
10+
CLR
ZOOM
D.CALL
The following information is displayed in the INFO mode.
(1) Program air time
(2) Channel number
(3) Closed caption
(4) Channel title
(5) Audio language
(6) Program content
NOTES:
When the program guide is displayed in more than 6 lines, use VOL+/button and scroll for reading.
"No description provided" is displayed when the program guide is not
provided.
18
Video menu
SETTING VIDEO
1 Press MENU button. The main menu screen will appear.
2 Press VOL+/- button to
select VIDEO Option,
then press CH- button
to enter.
POWER
TV/AV
TV/DTV
Q.VIEW
INFO
MUTE
1
2
3
4
5
6
7
8
9
CONTRAST
BRIGHTNESS
COLOR
SHARPNESS
TINT
TV/DVD OPEN/CLOSE
-
0
CC
P.MODE
SAP
0101
VIDEO
80
80
50
50
0
3 Press CH+/- to select the desired option, then press
VOL+/- to adjust.
CH+
VOL
_
VOL
+
MENU
OK
SLEEP
CHCH.LIST
STOP
REV
FAV.LIST
SIZ
GUIDE
Contrast
This will adjust the intensity of bright parts in the picture but keep
the dark parts unchanged.
SETUP PAUSE/STEP SUBTITLE
PREV
FWD
D.MENU
REPEAT
NEXT
A-B
SLOW
PLAY/ENTER
TITLE/PBC SEARCH
ANGLE
AUDIO
PROGRAM
10+
CLR
ZOOM
Brightness
This will adjust the light output of the complete picture, which will
mainly affect the darker areas of the picture.
Color
This will adjust the saturation level of the colors to suit your
personal preference.
D.CALL
Sharpness
This will adjust the sharpness of fine details in the picture.
Tint
Allows you to select the color mix (Tint) of the picture.
19
Audio menu
SETTING AUDIO
1 Press MENU button. The main menu screen will appear.
2 Press VOL+/- button to
0101
select AUDIO Option,
then press CH- button
to enter.
AUDIO
VOLUME
POWER
TV/AV
TV/DTV
Q.VIEW
INFO
MUTE
1
2
3
4
5
6
7
8
-
CC
9
TV/DVD OPEN/CLOSE
0
3 Press CH+/- to select
the desired option, then
press VOL+/- to adjust.
P.MODE
SAP
CH+
VOL
_
Volume
VOL
+
MENU
OK
This will adjust the sound output level.
SLEEP
CHCH.LIST
STOP
REV
FAV.LIST
SIZ
GUIDE
SETUP PAUSE/STEP SUBTITLE
FWD
D.MENU
PREV
NEXT
REPEAT
A-B
SLOW
PLAY/ENTER
TITLE/PBC SEARCH
ANGLE
AUDIO
PROGRAM
10+
CLR
ZOOM
D.CALL
20
20
Manual time setting
EXAMPLE: Setting the time to "8:30 AM"
You must set the time manually
for ON/OFF Timer.
TO SET TIME
1 Press MENU. The main menu screen will appear.
2 Press VOL+/- button to
POWER
TV/AV
TV/DTV
Q.VIEW
INFO
MUTE
1
2
3
4
5
6
7
8
-
CC
9
TV/DVD OPEN/CLOSE
0
P.MODE
SAP
CH+
VOL
_
select TIME option,
then press CH- button
to enter the submenu.
0101
TIME
TIME
TIMER OFF
TIMER ON
--:-- AM
--:-- AM
--:-- AM
3 Press CH+/- button to
select TIME , then press
CH+/- button to select
"--:--","AM";
press VOL+/- button to
set the value & AM &PM.
VOL
+
MENU
OK
SLEEP
CHCH.LIST
STOP
REV
FAV.LIST
SIZ
GUIDE
4 Press MENU until the MENU screen disappears.
SETUP PAUSE/STEP SUBTITLE
FWD
D.MENU
PREV
NEXT
REPEAT
A-B
SLOW
PLAY/ENTER
TITLE/PBC SEARCH
ANGLE
AUDIO
PROGRAM
10+
CLR
ZOOM
D.CALL
NOTE:
After a power failure or disconnection of the power, the
time will get lost. In this case, reset the preset time.
21
Setting the ON/OFF timer
This feature allows you to have the
TV automatically turn on/off at a
SETTING THE TIMER ON
predetermined time. If you program
The ON/OFF TIMER, the TV will turn
Press MENU. The main menu
on/off at the time your predetermined.
1
screen will appear.
2 Press VOL+/- button to
select TIME option,
then press CH- button
to enter the submenu.
POWER
TV/AV
TV/DTV
Q.VIEW
INFO
MUTE
1
2
3
4
5
6
7
8
9
0
CC
P.MODE
SAP
TIME
TIME
TIMER OFF
TIMER ON
TV/DVD OPEN/CLOSE
-
0101
--:-- AM
--:-- AM
--:-- AM
3 Press CH+/- button to
select TIME ON , then
press CH+/- button to
select "--:--","AM";
press VOL+/- button to
set the value.
CH+
VOL
_
4 Press MENU until the MENU screen disappears.
VOL
+
MENU
OK
SLEEP
CHCH.LIST
STOP
REV
FAV.LIST
SIZ
GUIDE
SETUP PAUSE/STEP SUBTITLE
FWD
D.MENU
PREV
NEXT
REPEAT
A-B
TITLE/PBC SEARCH
AUDIO
PROGRAM
10+
CLR
1 Press MENU. The main menu screen will appear.
SLOW
PLAY/ENTER
ANGLE
SETTING THE TIMER OFF
ZOOM
D.CALL
2 Press VOL+/- button to
select TIME option,
then press CH- button
to enter the submenu.
0101
TIME
TIME
TIMER OFF
TIMER ON
--:-- AM
--:-- AM
--:-- AM
3 Press CH+/- button to
select TIME OFF , then
press CH+/- button to
select "--:--","AM";
press VOL+/- button to
set the value.
4 Press MENU until the MENU screen disappears.
22
Function menu
SETTING THE NTSC CAPTION
This allows you to configure the way you choose to view
the captioning.
1 . Press the MENU button and then use VOL+/- button to select the
FUNCTION menu.
2 . Press CH- button to enter,
POWER
TV/AV
TV/DTV
Q.VIEW
INFO
MUTE
1
2
3
4
5
6
7
8
9
TV/DVD OPEN/CLOSE
-
0
CH+
VOL
+
MENU
3 . Then use VOL+/- button to
select caption: OFF,C1, C2,
C MUTE,TEXT1, TEXT2.
0101
FUNCTION
LANGUAGE
BLUE SCREEN
NTSC CAPTION
PARENTAL LOCK
ENGLISH
ON
C1
CC
P.MODE
SAP
VOL
_
then p ress CH+/- button
to select NTSC CAPTION .
OK
You can also press CC
button on the remote
control to select the
desired caption.
SLEEP
CHCH.LIST
STOP
REV
FAV.LIST
SIZ
GUIDE
SETUP PAUSE/STEP SUBTITLE
FWD
D.MENU
PREV
NEXT
REPEAT
A-B
4 . When you are satisfied with
your choice, press MENU
button to return to the
previous menu.
CAPTION
SLOW
PLAY/ENTER
TITLE/PBC SEARCH
ANGLE
AUDIO
PROGRAM
10+
CLR
ZOOM
The term for the words that scroll across the bottom of the TV
screen; usually the audio portion of the program provided for
the hearing impaired.
D.CALL
TEXT
The term for the words that appear in a large black frame and
almost cover the entire screen; usually messages provided by
the broadcaster.
23
Function menu
An age limitation can be set to
TO REGISTER PASSWORD
forbid children to see and hear
violent scenes or pictures for
adults, etc. The TV Corresponds
Press MENU. The main menu
to "TV RATING" and "MOVIE RATING".
to use the parental control function,
Press VOL+/- to select
you must register a password.
1
screen will appear.
2
FUNCTION , then press
CH- to enter the submenu.
3 Press CH+ to select
POWER
TV/AV
TV/DTV
Q.VIEW
INFO
MUTE
1
2
3
4
5
6
7
8
-
CC
9
TV/DVD OPEN/CLOSE
0
P.MODE
SAP
CH+
VOL
_
VOL
+
MENU
OK
0101
FUNCTION
LANGUAGE
BLUE SCREEN
NTSC CAPTION
PARENTAL LOCK
ENGLISH
ON
C1
PARENTAL LOCK ,
then press VOL+ to
enter the submenu.
4 Enter the password (4
digits) using the number
buttons(0-9).
The TV is set up with the
initial password 0000.
PLEASE ENTER PASSWORD
####
SLEEP
CHCH.LIST
STOP
REV
FAV.LIST
SIZ
GUIDE
0101
SETUP PAUSE/STEP SUBTITLE
PREV
FWD
D.MENU
REPEAT
NEXT
A-B
5 After inputting password
accurately, Press CH+/to select the desired item.
SLOW
PLAY/ENTER
PARENTAL LOCK
PARENTAL LOCK
PARENTAL GUIDEE
MPAA RATING
NO RATING
VIDEO
OFF
UNBLOCK
UNBLOCK
TITLE/PBC SEARCH
ANGLE
AUDIO
PROGRAM
10+
CLR
ZOOM
D.CALL
NOTES:
If you forget the password, you cannot set the Parent Control.
To avoid forgetting the password, write it down and keep it in a
safe place.
24
Function menu
TO CHANGE PASSWORD
1 Press MENU. The main menu screen will appear.
2 Press VOL+/- to select
FUNCTION , then press
CH- to enter the submenu.
POWER
TV/AV
TV/DVD OPEN/CLOSE
TV/DTV
Q.VIEW
INFO
MUTE
1
2
3
4
5
6
7
8
0
-
CC
9
3 Press CH+ to select
0101
FUNCTION
LANGUAGE
BLUE SCREEN
NTSC CAPTION
PARENTAL LOCK
ENGLISH
ON
C1
PARENTAL LOCK ,
then press VOL+ to
enter the submenu.
P.MODE
SAP
PLEASE ENTER PASSWORD
CH+
VOL
_
4 Enter the password (4
VOL
+
MENU
OK
SLEEP
####
digits) using the number
buttons(0-9).
CHCH.LIST
STOP
REV
FAV.LIST
SIZ
GUIDE
SETUP PAUSE/STEP SUBTITLE
FWD
D.MENU
PREV
NEXT
REPEAT
A-B
5 Press CH+ to select
CHANGE PASSWORD ,
then press VOL+ to
enter the submenu.
PARENTAL GUIDEE
MPAA RATING
NO RATING
VIDEO
CHANGE PASSWORD
TITLE/PBC SEARCH
AUDIO
PROGRAM
10+
CLR
PARENTAL LOCK
SLOW
PLAY/ENTER
ANGLE
0101
ZOOM
D.CALL
UNBLOCK
UNBLOCK
6 Enter the new password using
the number buttons(0-9).
ENTER A NEW PASSWORD
####
7 Enter again the new password.
PLEASE INPUT AGAIN
NOTES:
If you forget the password, you
cannot set the Parent Control.
To avoid forgetting the password,
write it down and keep it in a safe
place.
####
8 Press MENU until the MENU screen disappears.
25
Function menu
TO SET PARENTAL CONTROL ON/OFF
1 Enter the PARENT CONTROL menu.
2 press CH+/- button to
POWER
TV/AV
TV/DTV
Q.VIEW
1
2
5
INFO
MUTE
3
6
9
select PARENTAL LOCK ,
press VOL+/- button to
set ON or OFF .
TV/DVD OPEN/CLOSE
4
7
with your choice, press
MENU button to return to
the previous menu.
8
-
0
3 When you are satisfied
CC
P.MODE
SAP
0101
PARENTAL LOCK
PARENTAL LOCK
PARENTAL GUIDE
MPAA RATING
NO RATING
VIDEO
OFF
UNBLOCK
UNBLOCK
CH+
VOL
_
TO SET PARENTAL GUIDE
VOL
+
MENU
OK
SLEEP
CHCH.LIST
STOP
REV
FAV.LIST
SIZ
SETUP PAUSE/STEP SUBTITLE
PREV
FWD
D.MENU
REPEAT
2 press CH+/- button to
select PARENTAL GUIDE ,
press VOL+/- button to
enter the submenu.
NEXT
A-B
SLOW
PLAY/ENTER
1 Enter the PARENT CONTROL menu.
GUIDE
3 press CH+/-/VOL+/- button
to set the desired ratings.
TITLE/PBC SEARCH
ANGLE
AUDIO
PROGRAM
10+
CLR
ZOOM
D.CALL
0101
PARENTAL LOCK
PARENTAL LOCK
PARENTAL GUIDE
MPAA RATING
NO RATING
VIDEO
OFF
UNBLOCK
UNBLOCK
4 When you are satisfied
with your choice, press
MENU button to return to
the previous menu.
Ratings for Television programs
including made-for-TV movies :
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
(All children)
(Children 7 years older)
(General audience)
(Parental GUIDEance suggested)
(Parents strongly cautioned)
(Mature audience only)
RATING
ALL
FV
D
L
(
: BLOCK)
To use the TV after Parent Control is TV Rating Children:
activated.
ALL (Age) (applies to TV-Y, TV-Y7)
When the program applied to the Parental
FV (Fantasy Violence) (applies to TV-Y7)
Control, setting is received, enter the
password. When the password is entered TV Rating General:
correctly the protection will be temporarily
ALL (Age)
(applies to TV-G, TV-PG, TV-14, TV-MA)
overridden.
D (Dialogue - sexual dialogue) (applies to TV-PG, TV-14)
NOTE:
The Parental Control function is activated only on
programs and tapes that support the rating.
L (Language - adult language) (applies to TV-PG, TV-14, TV-MA)
S (Sex - sexual situations)
(applies to TV-PG, TV-14, TV-MA)
V (Violence)
(applies to TV-PG, TV-14, TV-MA)
26
S
TV-MA
TV-14
TV-PG
TV-G
TV-Y7
TV-Y
V
Function menu
TO SET THE MPAA RATING
1 Enter the PARENT CONTROL menu.
2 Press CH+/- button to
POWER
TV/AV
TV/DTV
Q.VIEW
INFO
MUTE
1
2
3
4
5
6
7
8
9
TV/DVD OPEN/CLOSE
-
0
SAP
SLEEP
CH-
STOP
REV
SIZ
GUIDE
SETUP PAUSE/STEP SUBTITLE
FWD
D.MENU
PREV
NEXT
REPEAT
A-B
SLOW
PLAY/ENTER
TITLE/PBC SEARCH
ANGLE
AUDIO
PROGRAM
10+
CLR
OFF
UNBLOCK
UNBLOCK
3 Press CH+/- button to select
Rating for Movies previously shown in theaters:
VOL
+
MENU
OK
FAV.LIST
PARENTAL LOCK
PARENTAL LOCK
PARENTAL GUIDE
MPAA RATING
NO RATING
VIDEO
the desired rating.
CH+
CH.LIST
0101
CC
P.MODE
VOL
_
select MPAA RATING ,
then press VOL+ button
to enter the submenu.
ZOOM
Movie Rating
NR
(Permits all programs)
G
(General audience)
PG
(Parental GUIDEance suggested)
PG-13 (Parents strongly cautioned)
R
(Restricted)
NC-17 (No one 17 and under admitted)
X
(Adult only)
MPAA RATING
MPAA-X
MPAA-NC-17
MPAA-R
MPAA-PG-13
MPAA-PG
MPAA-G
MPAA- NR
(
If you set PG-13 : G and PG movies
will be available , PG-13, R, NC-17
and X will be blocked.
: BLOCK)
D.CALL
4 Press VOL+/- button to select delete or
.
5 Press MENU until the MENU screen disappears.
27
Closed caption
WHAT IS CLOSED CAPTIONING?
This television has the capability to decode and display closed captioned television programs. Closed captioning
will display text on the screen for hearing impaired viewers or it will translate and display text in another language.
POWER
TV/AV
TV/DTV
Q.VIEW
INFO
MUTE
1
2
3
4
5
6
7
8
9
TV/DVD OPEN/CLOSE
-
0
CC
P.MODE
SAP
CH+
VOL
_
VOL
+
MENU
OK
SLEEP
CHCH.LIST
STOP
REV
FAV.LIST
SIZ
GUIDE
SETUP PAUSE/STEP SUBTITLE
FWD
D.MENU
PREV
NEXT
REPEAT
A-B
SLOW
PLAY/ENTER
Captions: This closed caption mode will display text on the
screen in English or another language (depending on the setting of the closed captions).
Generally, closed captions in English are transmitted on captions
CC 1 and closed captions in other languages are transmitted on
Captions CC 2.
Text: The text closed caption mode will usually fill the screen
with a programming schedule or other information.
After selecting a closed caption mode, it will stay in effect until it
is changed, even if the channel is changed.
If the captions signal is lost due to a commercial or a break in
the signal, the captions will reappear when the signal is received
again. If the channels are changed, the captions will be delayed
approximately 10 seconds. The captions will appear in places
on the screen where they will least interfere with the picture,
usually on the bottom of the screen. News programs will usually
show three-line closed captions which scroll onto the screen.
Most other shows provide two or three lined captions placed
near the character who is speaking so the viewer can follow the
dialogue. Words in italics or underlined describe titles, words in
foreign languages or words requiring emphasis. Words that are
sung usually appear enclosed by musical notes.
For television programs broadcasting with closed captions, look
in your TV GUIDE for the closed captions symbol (CC).
TITLE/PBC SEARCH
ANGLE
AUDIO
PROGRAM
10+
CLR
ZOOM
D.CALL
NOTES:
When selecting closed captions, the captioning will be delayed approximately 10 seconds.
If no caption signal is received, no captions will appear, but the television will remain in the caption mode.
Misspellings or unusual characters may occasionally appear during closed captioning. This is normal with
closed captioning, especially with live programs. This is because during live programs, captions are also
entered live. These transmissions do not allow time for editing.
When captions are being displayed, on-screen displays, such as volume and mute may be hided. If the OSD
display appears, the closed caption will disappear, when the OSD disappear, the Closed Caption will appear again.
Some cable systems and copy protection systems may interfere with the closed captioned signal.
If using an indoor antenna or if TV reception is very poor, the closed caption decoder may not appear or
may appear with strange characters or misspelled words. In this case, adjust the antenna for better reception
or use an outdoor antenna.
28
DTV setup menu
SETTING CLOSED CAPTION MODE
In DTV mode
1 Press MENU. The main menu screen will appear.
POWER
TV/AV
TV/DTV
Q.VIEW
INFO
MUTE
1
2
3
4
5
6
7
8
9
TV/DVD OPEN/CLOSE
-
0
SAP
CH+
VOL
_
SLEEP
CH-
STOP
REV
FAV.LIST
SIZ
GUIDE
D.MENU
PREV
NEXT
REPEAT
A-B
SLOW
PLAY/ENTER
It only appears when the
broadcasting signal bears.
4 Press VOL+ button and
then press CH+/- button
to select CAPTION MODE .
SETUP PAUSE/STEP SUBTITLE
FWD
DTV SETUP
DTVCC
DAYLIGHT SAVING
OFF
TIME ZONE
ALASKA
ATSC PARENTAL LOCK
3 Press CH+/- button to
select DTV CC.
VOL
+
MENU
OK
CH.LIST
select DTV SETUP .
then press CH- button
to enter the submenu.
CC
P.MODE
0101
2 Press VOL+/- button to
0101
DTV SETUP
5 Press VOL+ button and
then press VOL+/- button
to s et the CLOSED CAPTION
" OFF "or " ON ".
CAPTION MODE
USER SETTING
BROADCAST
DTV CAPTION STYLE
TITLE/PBC SEARCH
ANGLE
AUDIO
PROGRAM
10+
CLR
ZOOM
D.CALL
When setting on, the DTV
CC option will be available.
0101
6 Press CH+/- button to
select DTV CC and press
VOL+/- button to set
the desired service.
DTV SETUP
CLOSED CAPTION
DTV CC
OFF
SERVICE1
SETTING DTV CC
This allows you to configure the way you choose to view the
digital captioning.
Select one of the digital service channels made available by
the caption provider.
There are 6 standard services. Service 1 is designated as the
Primary Caption Service. This service contains the verbatim,
or near-verbatim captions for the primary language being
spoken in the accompanying program audio.
Service 2 is designated as the Secondary Language Service.
This service contains captions in a secondary language which
are translations of the captions in the primary Caption Service.
The other service subchannels are not pre-assigned. It is up
to the discretion of the individual caption provider to utilize
the remaining service channels.
29
DTV setup menu
SETTING THE CC USER SETTING
1 Press MENU. The main menu screen will appear.
2 Press VOL+/- button to
POWER
TV/AV
TV/DTV
Q.VIEW
INFO
MUTE
1
2
3
4
5
6
7
8
-
CC
9
TV/DVD OPEN/CLOSE
0
select DTV SETUP .
then press CH- button
to enter the submenu.
3 Press CH+/- button to
0101
DTV SETUP
DTVCC
DAYLIGHT SAVING
OFF
TIME ZONE
ALASKA
ATSC PARENTAL LOCK
select DTV CC.
P.MODE
SAP
4 Press VOL+ button and
CH+
VOL
_
VOL
+
MENU
OK
SLEEP
then press CH+/- button
to select USER SETTING .
0101
DTV SETUP
CHCH.LIST
STOP
REV
FAV.LIST
SIZ
GUIDE
SETUP PAUSE/STEP SUBTITLE
FWD
D.MENU
PREV
NEXT
REPEAT
A-B
SLOW
PLAY/ENTER
TITLE/PBC SEARCH
ANGLE
AUDIO
PROGRAM
10+
CLR
ZOOM
D.CALL
5 Press VOL+/- button to
s et " BROADCAST "or
" CUSTOM ".
CAPTION MODE
USER SETTING
BROADCAST
DTV CAPTION STYLE
SETTING THE DTV CAPTION STYLE
The DTV caption style function lets you change the caption
size and font style.
When " USER SETTING " is set to CUSTOM , you can set
the following items.
1 Press CH+/- button to
select DTV CAPTION
STYLE .
2 Press VOL+ button to
0101
DTV SETUP
CAPTION MODE
USER SETTING
BROADCAST
DTV CAPTION STYLE
enter the submenu .
3 Press CH+/- button to
select the desired option.
0101
DTV SETUP
4 Press VOL+/- button to
adjust the option.
30
STYLE
SIZE
TEXT COLOR
TEXT OPACITY
EDGE TYPE
STYLE2
LARGE
WHITE
SOLID
NONE
DTV setup menu
SETTING THE DTV CAPTION STYLE(continue)
Style
POWER
TV/AV
TV/DVD OPEN/CLOSE
TV/DTV
Q.VIEW
INFO
MUTE
1
2
3
4
5
6
7
8
Select this option to select the font style of caption display
according to your own preference.
Press the VOL+/- button to select Style1, Style2, Style3,
Style4,Style5, Style6, Style7, Style8.
Size
9
-
0
CC
Select this option to select the size of caption display according
to your own preference.
Press the VOL+/- button to select Small , Standard or Large ,
P.MODE
SAP
Text color
CH+
VOL
_
VOL
+
MENU
OK
SLEEP
Select this option to select the text color or the opacity of the text
box of caption display according to your own preference.
Select a color and one of the opacity options.
CHCH.LIST
STOP
FAV.LIST
SIZ
GUIDE
Text Opacity : Specify the opacity for the text color.
SETUP PAUSE/STEP SUBTITLE
BG (Background) Color : Select a background color.
REV
FWD
PREV
NEXT
REPEAT
A-B
BG (Background) Opacity : Select the opacity for the
D.MENU
background color.
SLOW
PLAY/ENTER
TITLE/PBC SEARCH
ANGLE
AUDIO
PROGRAM
10+
CLR
ZOOM
D.CALL
31
DTV setup menu
SETTING THE DAYLIGHT SAVING
POWER
TV/AV
TV/DVD OPEN/CLOSE
TV/DTV
Q.VIEW
INFO
MUTE
1
2
3
4
5
6
7
8
9
0
-
2 Press VOL+/- button to
CH+
VOL
+
MENU
OK
SLEEP
CHCH.LIST
STOP
REV
FAV.LIST
SIZ
GUIDE
SETUP PAUSE/STEP SUBTITLE
FWD
D.MENU
PREV
NEXT
REPEAT
A-B
SLOW
PLAY/ENTER
TITLE/PBC SEARCH
ANGLE
AUDIO
PROGRAM
10+
CLR
ZOOM
1 Press MENU. The main menu screen will appear.
CC
P.MODE
SAP
VOL
_
Daylight saving time is automatically set by specially
broadcasted signals.
This menu item allows you to disable the automatic
setting of daylight saving time. This is useful if you live
in an area or state where daylight saving is not applied,
but you receive channels from other areas where daylight
saving signals are broadcasted.
0101
select DTV SETUP option,
then press CH- button
to enter.
3 Press CH+/- button to
DTV SETUP
DTVCC
DAYLIGHT SAVING
OFF
TIME ZONE
ALASKA
ATSC PARENTAL LOCK
select DAYLIGHT SAVING,
then press VOL+/- button
to select ON for automatic
clock correction for daylight
saving time, based on
specially broadcasted signals.
Select OFF to disable automatic
clock correction based on the
specially broadcasted signals.
D.CALL
SETTING THE TIME ZONE
This function allows you to select your local time zone.
Broadcasted time information will correct the clock display
for your local time.
1 Press MENU. The main menu screen will appear.
2 Press VOL+/- button to
select DTV SETUP option,
then press CH- button
to enter.
3 Press CH+/- button to
select TIME ZONE option.
4 Press VOL+/- button to
select your viewing area
time zone: NEWFOUNDLAND,
ATLANTIC, EASTERN, CENTRAL,
MOUNTAIN, PACIFIC, ALASKA,
HAWAII, or SAMOA
32
0101
DTV SETUP
DTVCC
DAYLIGHT SAVING
OFF
TIME ZONE
ALASKA
ATSC PARENTAL LOCK
DTV setup menu
SETTING ATSC PARENTAL LOCK
1 Press MENU. The main menu screen will appear.
POWER
TV/AV
TV/DVD OPEN/CLOSE
TV/DTV
Q.VIEW
INFO
MUTE
1
2
3
4
5
6
7
8
0
-
CC
9
P.MODE
SAP
CH+
VOL
_
SLEEP
CH-
STOP
REV
FAV.LIST
SIZ
GUIDE
SETUP PAUSE/STEP SUBTITLE
PREV
FWD
D.MENU
select DTV SETUP .
then press VOL- button
to enter the submenu.
3 Press CH+/- button to
0101
DTV SETUP
DTVCC
DAYLIGHT SAVING
OFF
TIME ZONE
ALASKA
ATSC PARENTAL LOCK
select ATSC PARENTAL
LOCK.
VOL
+
MENU
OK
CH.LIST
2 Press CH+/- button to
REPEAT
NEXT
A-B
4 Enter the password (4
digits) using the number
buttons(0-9).
The TV is set up with the
initial password 0000 and
enter next submenu.
ENTER CODE
####
0101
SLOW
PLAY/ENTER
DTV SETUP
TITLE/PBC SEARCH
ANGLE
AUDIO
PROGRAM
10+
CLR
ZOOM
VERSION
DIMENSION
CLEAR RRT
D.CALL
[RRT0]
Version
V-chip broadcast source version.
Dimension
Use when viewing non-TV broadcast programming.
Clear RRT
CLEAR Rating Table (RRT) information:
This will clear V-Chip ratings table version.
33
Other Functions
GUIDE
- This activates some, but not all, electronic program guides
(EPG data) when it is used and transmitted by some DTV station
providers. It is only supported when receiving DTV channels.
GUIDE
POWER
TV/AV
TV/DTV
Q.VIEW
INFO
MUTE
1
2
3
4
5
6
7
8
-
CC
9
1/3 >>
TV/DVD OPEN/CLOSE
0
03:00 ---04:00
Moving picture
480i 4:3
04:00 ---05:00
Moving picture
480i 4:3
P.MODE
SAP
CH+
VOL
_
VOL
+
MENU
OK
SLEEP
CHCH.LIST
STOP
REV
FAV.LIST
SIZ
GUIDE
1. Press the GUIDE button to switch on GUIDE.
2. Press the CH+/- or VOL+/- button to select desired program,
then press the OK button to display the selected program.
3. Press the GUIDE or EXIT button again to switch off GUIDE and
return to TV viewing.
SETUP PAUSE/STEP SUBTITLE
PREV
FWD
D.MENU
REPEAT
NEXT
A-B
SLOW
PLAY/ENTER
TITLE/PBC SEARCH
ANGLE
AUDIO
PROGRAM
10+
CLR
ZOOM
D.CALL
FAVORITE CHANNELS LIST
You can create your own Favorite List. Use the FAV.LiST
butt on on the remote control when a channel is highlighted
and then you can add or delete the channel to/from the
Favorite List.
FAVORITE CHANNELS
14.3
ATSC-3
[ENTER KEY] ADD CURRENT CH TO
SKIP ON
Press the FAV.LIST button open the favorite channel
list, press CH+/- button to select the channel and press
OK button to confirm.
34
Other Functions
QUICKLY VIEW
This function enables quick swap to the last watched program.
1 Suppose the channel number you used
POWER
TV/AV
TV/DTV
Q.VIEW
INFO
MUTE
1
2
3
4
5
6
7
8
9
TV/DVD OPEN/CLOSE
-
0
CC
P.MODE
SAP
CH+
VOL
_
VOL
+
MENU
OK
just now is 8 and the channel number
you are using is 18 (as shown in the figure).
2 If you want to return to the last watched
program channel 8, you can simply press
the Q.View button.
3 If you want to return to channel 18, press
the button again. Use this function, you
can easily change between the channel
you are using and the channel you used
last time.
SLEEP
CHCH.LIST
STOP
REV
FAV.LIST
SIZ
GUIDE
SETUP PAUSE/STEP SUBTITLE
FWD
D.MENU
PREV
NEXT
REPEAT
A-B
SLOW
PLAY/ENTER
TITLE/PBC SEARCH
ANGLE
AUDIO
PROGRAM
10+
CLR
ZOOM
D.CALL
SLEEP TIMER
To set the TV to turn off after a preset amount of time, press SLEEP
button repeatedly to select
the number of minutes. First the
OFF option appears on the screen,
followed by the following sleep
timer options:
(5 MINUTE,10 MINUTE, 15 MINUTE,
30 MINUTE,45 MINUTE, 60 MINUTE,
SLEEP OFF
90 MINUTE,120 MINUTE,
180 MINUTE, 240MINUTE,OFF)
To confirm the sleep timer setting,
press SLEEP and the remaining
time will be displayed for a few
seconds. To cancel the sleep timer,
Press SLEEP repeatedly until the
display turns to OFF .
PICTURE MODE
Every time press the P.MODE button to
switch desired picture quality mode.
Four kinds of picture modes
(i.e., " MILD "," STANDARD "," VIVID " ,
" CUSTOM ", ) can be selected in turn.
MILD
35
DVD Features
Basic Playback
Preparations
Stop playback
1. Press STOP
button to go to stop mode, the TV
screen will show the start logo. For some discs the
player can recall the location where stopped, such
as DVDs and audio CDs.
2. Press PLAY/ENTER to playback to resume playback from the location where playback is stopped
or from the beginning of the disc.
3. Press STOP twice to stop completely.
Press the DVD/TV button on the remote control or
the TV to enter the DVD status.
Basic playback
1. Press OPEN/CLOSE to open the disc tray,
place a disc in the disc tray.
There are two different disc sizes. Place the
disc in the correct GUIDE on the disc tray. If the
disc is out of the GUIDE, it may damage the disc
and cause the DVD player to malfunction.
Do not place a disc which is unplayable in this
DVD player.
2. Press OPEN/CLOSE to close the disc tray, the
playback will automatically start.
Some discs do not start automatically. Press
PLAY/ENTER to start playback.
Previous and Next
During Playing, pressing the PREV
key will
restart the current chapter and skip chapters
backwards with each subsequent press until the
start of the disc is reached.
Each press of NEXT
key during playing will
skip the current chapter and play the next one.
3. Some discs may start playback with a menu. Use
the cursor buttons on the remote control to select
menu options and press PLAY/ENTER to start. You
may also press the digit buttons to select a menu
option directly. Many DVDs will not allow this during
start-up.
Fast forward and Fast reverse
1. Press FWD
to fast forward through the disc.
Each time the FWD
button is pressed, the
fast forward motion speed changes.
2. Press PLAY/ENTER to resume normal playback.
3. Press REV
to fast reverse through the disc.
Each time the REV
button is pressed, the
fast reverse motion speed changes.
4. Press PLAY/ENTER to resume normal playback.
Pause playback
1. Press PAUSE/STEP to pause playback (still mode).
The sound will be muted during still mode.
2. Press PLAY/ENTER to resume normal playback.
Single step playback
1. When paused, press PAUSE/STEP continuous
to single step forward to the next frame in the
video.
2. Press PLAY/ENTER to resume normal playback.
36
DVD Features(Continued)
Advanced Playback
IMPORTANT NOTE:
All described functions are for DVD discs. If you play other format discs, the operation
and on screen display will be different.
PROGRAM
CAPTION
SUBTITLE
Press "SUBTITLE ", the screen will display "SUBTITLE 01/XX XXXXX", "01" indicates the original
number of this language; "XX" indicates total number
of language; "XXXXXX" indicates the language of
country. (the number of language depends on disc).
This function can select up to 32 languages displayed on screen.
When playing discs, press "PROGRAM" to enter
program mode. Press the digit buttons to select the
program number that you want. When finished move
the cursor to select "START" . This will start the
program playback.
SEARCH
REPEAT
Press "SEARCH" once to display the search
menu. Press the button again to select. Press
the program number buttons to input the item
you require. Press PLAY/ENTER to confirm.
Press " REPEAT " and Chapter repeat will be
displayed on screen, the second press will display
Title repeat, the third press will display All repeat,
the fourth press will cancel this function.
SLOW
A-B
Press SLOW to play a disc in slow forward. Each
time the SLOW button is pressed, the slow
motion speed changes.
Press PLAY/ENTER to resume normal playback;
Press " A-B " to begin start-point, press again
to set an end point and complete setting. The
selected section A-B will be repeated. The third
press will cancel this function.
Note: This function does not work for CD and MP3.
ANGLE
When enjoying sports, concert or theatre, press this TITLE/PBC
key to watch same actions in different angles. (Valid With some DVD discs pressing this key will display
the title menu. You can then use the digit buttons
for discs possessing this function. Using a disc
recorded in multi-angle you can view the scene from to select the item you prefer.
different angles,for example,front, side, whole view
and exterior scene).
AUDIO
D.MENU
Press this key can change the mode of audio.
such as: Audio 1/2: AC 3 2 CH English
Press this key to display root menu,select item
Audio 2/2: AC 3 5.1 CH English
according to your preference. (This function will work
Press this button to cycle between Mono Left, Mono
with a DVD having a multi-layer menu.)
Right, Mix-Mono and Stereo.
Note: When press this button continuously, you must
above 3 seconds interval.
D.CALL
Pressing this key will cycle through "Title Elapsed",
"Title Remain", "Chapter Elapsed", "Chapter Remain"
and "Display off ".
37
Special Playback Functions
JPEG DISC PLAYBACK
When a disc containing standard JPEG picture files is inserted into the player, a
navigation menu will be displayed automatically. Use the UP and DOWN cursor
buttons to select a file then press PLAY/ENTER. The slide show will commence.
Press PREVIOUS or NEXT to move between pictures. Press pause to stop on the
current picture. Press PLAY/ENTER to resume normal playing.
A JPEG disc contains JPEG (.jpg) format picture information that can be decoded
by a micro-computer software and displayed through the video output interface or on
the television screen.
This function has many applications. For example one can save files from a scanner
or digital camera in the JPEG format, record these on a CD-R disc and present them
to an audience through this player.
The JPEG format is a convenient method to store images in a small amount of
memory space, and is ideal for archiving information.
MP3 PLAYBACK
When playing an MP3 disc, a navigation menu will be displayed automatically. In the menu, use UP
or DOWN cursor buttons to choose the folder, then press PLAY/ENTER to enter the folder. Use the
UP and DOWN cursor buttons to select the file and press PLAY/ENTER. Pressing the LEFT cursor
button will take you to the previous screen/menu.
SCREEN SAVER FUNCTION
This unit employs a screen saver mode to help protect the tube during static video pictures. This can
be turned off on the GENERAL SETUP PAGE.
38
DVD System Setup
DVD System Setup
General Setup Process
SETUP
1.Press the SETUP button, the
General Setup Page,Preference
Page will be displayed in turn.
2.Press CH+/or b
item, then press
submenu.
PLAY/ENTER
to select, the
to enter the
or bu to select then
3.Press CH+/press PLAY/ENTER to confirm.
4.Press EXIT key or press SETUP
repeatedly to exit the set-up
menus.
..General Setup Page..
TV Display
Angle Mark
OSD Lang
Spdif Output
Caption
Screen Saver
.
LB 4 3:Ps
.
On 4 3:Lb
ENG 16 9
On
Off
..Preference Page..
Password
Default
General Setup Page
ASPECT RATIO DESCRIPTION
When using the DVD with the internal TV,
select 4 3/LB.
The following information applies only
when the DVD output is connected to an
external TV.
SETUP
PLAY/ENTER
..General Setup Page..
TV Display
Angle Mark
OSD Lang
Spdif Output
Caption
Screen Saver
.
LB 4 3:Ps
.
On 4 3:Lb
ENG 16 9
On
4:3/PS (PS = Pan and Scan)
Off
You may select if you have a normal aspect
ratio (4:3) TV, although the NORMAL/LB
(letter box) is a more common choice. In PS
mode, widescreen material will fill the screen, but at the expense of chopping
off extreme left and right edges of the original film picture. For this feature to
work, the disc must be specially coded. Such discs are uncommon.
4:3/LB (LB = Letter Box)
You may select this if you have a normal aspect ratio (4:3) TV. Widescreen
material will be shown in pure unaltered form, allowing the entire picture area
of the original film to be viewed without any side cropping. Black bars will
appear above and below the picture.
16:9
You may select this if you have a widescreen (16:9) TV. Back bars may still
appear above and below the picture even if using a widescreen TV. This is
because some film directors prefer to use ultra widescreen aspect ratios e.g.
2.35:1. This will normally be indicated on the DVD packaging.
39
DVD System Setup(Continued)
DVD System Setup
General Setup Page
ANGLE MARK: Users can select a particular
camera angle .when playing a DVD which offers
multiple angles.
This item allows you to set Angle Mark ON or OFF.
On Screen Display (OSD) Language: Users
can select on-screen display language.
..General Setup Page..
TV Display
Angle Mark
OSD Lang
Spdif Output
Captions
Screen Saver
This DVD player includes three kinds of audio output:
1. SPDlF OFF: An analog surround sound format is output
through the back-paneI connections for 2-CH audio out or
5.1 CH audio out.
2. SPDlF/RAW or SPDIF/PCM: This mode allows a coaxial
output cable to be connected to external equipment containing
various audio processors that decode various synthesized and
discrete audio information for greater effects.
CAPTIONS: This function allows you to display or
hide the caption.
SCREEN SAVER: If the screen saver is on, then
there will be an animated picture of DVD on the
screen whenever the DVD player is idle for more
than 3 minutes .
40
On
Off
On
Off
..General Setup Page..
TV Display
Angle Mark
OSD Lang
Spdif Output
Caption
Screen Saver
SPDlF OUTPUT MODE: Coaxial audio output modes
when connecting to external audio equipment.
LB
On
ENG
LB
On
ENG English
Spanish
On
Off
..General Setup Page..
TV Display
Angle Mark
OSD Lang
Spdif Output
Caption
Screen Saver
LB
On
ENG
On
Off
Spdif Off
Spdif / Raw
Spdif / Pcm
..General Setup Page..
TV Display
Angle Mark
OSD Lang
Spdif Output
Captions
Screen Saver
LB
On
ENG
On
Off
On
Off
..General Setup Page..
TV Display
Angle Mark
OSD Lang
Spdif Output
Caption
Screen Saver
LB
On
ENG
On
Off
On
Off
DVD System Setup(Continued)
DVD System Setup
Preference Page
The Preference Page is only available when there is no disc
in the player. These settings are applied consistently to all
discs which are inserted and played.
SETUP
..Preference Page..
Password
Default
PLAY/ENTER
PASSWORD CHANGE:
You can change your password by
entering 4 digits. You must confirm
the 4 digits before the new password
can be accepted.
..Preference Page..
Password
Default
SETUP
Old Password
New Password
Confirm PWD
PLAY/ENTER
NOTE:If you forget your password
or a password is accidentally set
enter 2881 as the password. This
will enable you to regain control.
41
Change
DVD System Setup(Continued)
DVD System Setup
SETUP
DEFAULT: Resets all settings
(except password and parental
lock status) for this DVD player
back to the manufacturers
original settings. Press ENTER
to perform the reset.
..Preference Page..
Password
Default
Reset
PLAY/ENTER
Note:
Some functions may not be available depending on the type of disc.
42
Playable Discs
The following discs can be played:
You cannot play discs other than those listed above.
You cannot play non-standardized discs, even if they may be labelled as above.
The performance of CD-R or CD-RW disc depends on the way the disc was burned. In a few cases,
their performance may not be consistant or may not even operate at all.
This DVD Player is designed and manufactured according to the Region Management
Information that is recorded on a DVD disc. If the Region number described on the DVD disc
does not correspond to the Region number of this DVD Player, this DVD player will not play
that disc.
This Region number of this DVD Player is .
1
43
Disc Protection and DVD Characteristics
Compare DVD disc with other discs:
DVD
Encode
method
LD
Digital/MPEG
Analog
Singleside
doublelayer
9.4G
Doubleside
doublelayer
17G
133
242
266
Playing Time minutes minutes minutes
484
minutes
Capacity
Disc diameter
Singleside
singlelayer
4.7G
Double
-side
single
-layer
8.5G
12cm/8cm
Horizontal
resolution
More than 500 line
Picture
proportion
Multiple kinds
Subtitle
Language
Sound quality
32 kinds
8 kinds
48KHz, 96KHz/
6, 20, 24bit
Single-side
60 minutes
double-side
120 minutes
30cm/20cm
SVCD
VCD
Digital
Digital/
MPEG I
650MB
650MB
45 minutes 74 minutes
12cm
12cm
CD
Digital
650MB
74 minutes
12cm/8cm
No more than No more than No more than
250 line
430 line
350 line
One kind
16 kinds
at most
One kind
One kind
4 kinds
4 kinds
at most
4 kinds
at most
2 kinds
2 kinds
44.1KHz/
16bit
44.1KHz/
16bit
44.1KHz/
16bit
44.1KHz/
16bit
44
Troubleshooting guide
To assist in location possible faults use help guide below .
BREAKDOWN PHENOMENON
PICTURE
CHECKING
SOUND
The aerial direction and connection
Picture with snow
Double or Triple Image
Noise
Normal
This is called "ghosting" and can be minimized with
an outside aerial, and good quality cable and
terminations. Altering the aerial direction can also
minimize this effect.
Electrical interference which can be caused by cars,
motorbikes etc, Fluorescent lamps and dirty
insulators on overhead power cables.
Disturb
Noise
Volume Sound mute
Normal
No Picture
No sound
No sound
Ensure that the power supply is connected to
the TV set and turned on. Also ensure that the
TV set is not in "Listen Mode" or that the
brightness and contrast are not turned down.
Adjust color control
No color
Normal volume
Adjust channel again
Scramble
Color Spot
Normal or Weak Volume
Normal volume
Color Purity is a fault that can be caused by moving the
TV set, placing magnets near the TV screen or turning
on/off house hold appliances such as vacuum cleaners
near the TV set. Turn the TV off with the main power
switch for 15 minutes. When the power is turned on
again the TV set will automatically degauss the picture.
In severe cases leave the TV set turned off over night.
Note:
1.If the fault can not be corrected using the above guide consult with your local authorized service
center.
2.The TV set must only be repaired by a qualified registered service person. Never attempt to
remove the back cover as TV set has dangerous voltages inside that may cause a fatality or fire.
3. The cabinet may produce the occasional "snapping sound" This is normal and caused by the
materials in the cabinet expanding with room temperature changes.
45
Specifications
The specifications offered you here are for reference only. With product improvement
there may be some differences between the description and the final product.
13 "
14 "
20 "
ATSC
13
14
85
85
13 "
368.8 mm x 378.6 mm x 378.8mm
14 "
420 mm x 382 mm x 385mm
20 " Round
499.4 mm x 483.5 mm x 481.7mm
20 " pure Flat
499.9 mm x 483.5 mm x 481.7mm
90
NOTE
Design and specifications are subject to change without notice.
Dimensions quoted in this manual are approximate.
The registered logos shown in this manual, such as those on the page showing playable discs
contents, are those of the license holders and the associated trademarks holders. They are
shown for informational purposes only and do not indicate content or capability in all software,
nor with all hardware.
46
0090500359A
02
Download PDF

advertising