User`s manual | CyberResearch CPBH Laptop User Manual

®
CPU Cards
CPBH Series
PICMG Single-Board Computer with VGA, Dual
GB LAN, SATA, USB, DIO, TV Out, Audio &
PC/104
CPBH CEL-24-X: 2.4GHz Celeron CPU
CPBH P4-24-X: 2.4GHz Pentium 4 CPU
CPBH P4-32-X: 3.2 GHz Pentium 4 CPU
USER’S MANUAL
VER. 1.4 • APR 2005
No part of this manual may be reproduced without permission
®
CyberResearch , Inc.
www.cyberresearch.com
25 Business Park Dr., Branford, CT 06405 USA
203-483-8815 (9am to 5pm EST) FAX: 203-483-9024
®
CyberResearch CPU Cards
CPBH Series
©Copyright 2005
All Rights Reserved.
April 22, 2005
The information in this document is subject to change without prior notice
in order to improve reliability, design, and function and does not represent
a commitment on the part of CyberResearch, Inc.
In no event will CyberResearch, Inc. be liable for direct, indirect, special,
incidental, or consequential damages arising out of the use of or inability
to use the product or documentation, even if advised of the possibility of
such damages.
This document contains proprietary information protected by copyright.
All rights are reserved. No part of this manual may be reproduced by any
mechanical, electronic, or other means in any form without prior written
permission of CyberResearch, Inc.
Trademarks
“CyberResearch,” and “CPBH Series,” are trademarks of CyberResearch,
Inc. Other product names mentioned herein are used for identification
purposes only and may be trademarks and/or registered trademarks of
their respective companies.
• NOTICE •
CyberResearch, Inc. does not authorize any CyberResearch product for
use in life support systems, medical equipment, and/or medical devices
without the written approval of the President of CyberResearch, Inc. Life
support devices and systems are devices or systems which are intended
for surgical implantation into the body, or to support or sustain life and
whose failure to perform can be reasonably expected to result in injury.
Other medical equipment includes devices used for monitoring, data
acquisition, modification, or notification purposes in relation to life
support, life sustaining, or vital statistic recording. CyberResearch
products are not designed with the components required, are not subject
to the testing required, and are not submitted to the certification required
to ensure a level of reliability appropriate for the treatment and diagnosis of
humans.
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
iii
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CyberResearch CPU Cards
CPBH Series
Intentionally Blank
iv
©Copyright 2005 CyberResearch, Inc.
®
CyberResearch CPU Cards
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
CPBH Series
v
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
CPBH Series
vi
®
CyberResearch CPU Cards
©Copyright 2005 CyberResearch, Inc
®
CyberResearch CPU Cards
CPBH Series
Table of Contents
Chapter 1
General Description .................................. 1
1.1
1.2
1.3
Major Features ..............................................................2
Specifications ...............................................................3
Board Dimensions........................................................4
Chapter 2
Unpacking .................................................. 5
2.1
2.2
Opening the Delivery Package ....................................5
Inspection......................................................................5
Chapter 3
Hardware Installation .............................. 7
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
3.10
3.11
3.12
3.13
3.14
3.15
3.16
3.17
3.18
3.19
3.20
3.21
3.22
3.23
Before Installation ........................................................7
Board Layout ................................................................8
Jumper List ...................................................................9
Connector List ..............................................................9
Configuring the CPU ..................................................10
System Memory ..........................................................10
VGA Controller............................................................10
Serial ATA Function ....................................................12
PCI E-IDE Drive Connector ........................................13
Floppy Disk Drive Connector ....................................15
Serial Port Connectors...............................................16
IrDA Connector ...........................................................17
Parallel Connector......................................................18
Ethernet Connector ....................................................19
USB Connector ...........................................................19
CMOS Data Clear ........................................................20
Power and Fan Connectors.......................................20
Keyboard/Mouse Connector .....................................22
System Front Panel Connectors...............................22
Watchdog Timer..........................................................23
Audio Connectors ......................................................24
TV-Out Function..........................................................24
PC/104 Connectors.....................................................25
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
iv
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
CPBH Series
Chapter 4
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
4.10
4.11
4.12
4.13
4.14
4.15
4.16
®
CyberResearch CPU Cards
Award BIOS Setup ................................. 27
Starting Setup .............................................................27
Using Setup.................................................................28
Main Menu ...................................................................29
Standard CMOS Features ..........................................30
Advanced BIOS Features ..........................................31
Advanced Chipset Features ......................................32
Integrated Peripherals................................................33
Power Management Setup.........................................35
PnP/PCI Configurations .............................................36
PC Health Status.........................................................36
Frequency/Voltage Control........................................37
Load Fail-Safe Defaults..............................................37
Load Optimized Defaults ...........................................38
Set Supervisor/User Password .................................39
Save & Exit Setup .......................................................40
Exit Without Saving....................................................41
Chapter 5
Software Utilities ..................................... 43
5.1
IDE Driver Installation ................................................43
Installing Intel Chipset Software Utility .................................. 43
VGA Driver Installation...............................................46
LAN Driver Installation...............................................48
Win 95/98/2K/XP................................................................................. 48
Win NT ........................................................................................................50
Audio Driver Installation ............................................58
USB2.0 Driver Installation..........................................60
Win 95/98................................................................................................60
Win 2000 ...................................................................................................61
Win XP ........................................................................................................65
5.2
5.3
5.4
5.5
vii
5.1.1
5.3.1
5.3.2
5.5.1
5.5.2
5.5.3
©Copyright 2005 CyberResearch, Inc
®
CyberResearch CPU Cards
CPBH Series
Safety Instructions
Integrated circuits on computer boards are sensitive to static electricity.
To avoid damaging chips from electrostatic discharge, observe the
following precautions:
„ Do not remove boards or integrated circuits from their anti-static
„
„
„
packaging until you are ready to install them.
Before handling a board or integrated circuit, touch an unpainted portion
of the system unit chassis for a few seconds. This helps to discharge any
static electricity on your body.
Wear a wrist-grounding strap, available from most electronic component
stores, when handling boards and components. Fasten the ALLIGATOR
clip of the strap to the end of the shielded wire lead from a grounded
object. Please wear and connect the strap before handling the CPBH to
protect yourself from the discharge of any static electricity through the
strap.
Please use an anti-static pad when putting down any components or
parts or tools outside the computer. You may also use an anti-static bag
instead of the pad. Please inquire from your local supplier for additional
assistance in finding the necessary anti-static gadgets.
NOTE:
DO NOT TOUCH THE BOARD OR ANY OTHER SENSITIVE
COMPONENT WITHOUT ALL NECESSARY ANTI-STATIC
PROTECTION.
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
viii
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
CPBH Series
ix
®
CyberResearch CPU Cards
©Copyright 2005 CyberResearch, Inc
®
CyberResearch CPU Cards
CPBH Series
Chapter 1
General Description
The CPBH is an Intel® 82865GV/82801EB chipset-based board
designed for PICMG Bus PGA 478 Intel® Pentium® 4 CPU with speed
of up to 3.2GHz CPU. The combination of these features makes the
CPBH an ideal all-in-one industrial single board computer. Additional
features include an enhanced I/O with CRT/LVDS Panel, TV-Out, dual
Giga LAN, audio, serial ATA, 4 COM port interface, and more.
Its onboard ATA/33/66/100 connected to IDE drive interface
architecture allows the CPBH to support data transfers of 33, 66 or
100MB/sec. for each IDE drive connection. Designed with the Intel®
82865GV/82801EB core logic chipset, the board supports all PGA 478
Pentium® 4 CPU series with Intel® Hyper-Threading Technology
clocking up to 3.2GHz. The display controller is Intel 82865GV with
1MB/8MB/16MB memory supporting CRT display up to 1600 x 1200 x
32-bit at 60Hz.
Serial ATA is the revolutionary ATA interface that provides scalable
performance for IDE device. With up to 150MB/sec. data transfer rate,
serial ATA is faster than the current parallel ATA and delivers superior
input/output performance. In addition, the serial ATA interface is
furnished with RAID 0/1 function for extra performance enhancement
and data protection.
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
1
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CPBH Series
CyberResearch CPU Cards
System memory is also sufficient with the two DDR sockets that can
support DDR-266/333/400 up to 2GB. 800MHz FSB CPU can support
DDR-400, 533MHz FSB CPU, can support DDR-333, and 400MHz
FSB CPU can support DDR-266.
Additional onboard connectors include an advanced USB2.0 and IrDA
port providing faster data transmission, and two external RJ-45
connectors for use of one 100/1000 and one 10/100 OR two 10/100
Base-TX Ethernet interfaces.
1.1 Major Features
The CPBH comes with the following features:
¾
¾
¾
¾
¾
¾
¾
¾
¾
¾
¾
¾
¾
¾
2
PGA 478 for Intel® Pentium® 4 CPU with Hyper-Threading Technology
clocking up to 3.2GHz
Supports 400/533/800MHz FSB
Two DDR sockets with a max. capacity of 2GB
Intel 82865GV/82801EB system chipset
Winbond W83627 super I/O chipset
®
Intel 82865GV display controller
Intel® 82562EZ (or 82547EI) and 82540 LAN controller
AC97 3D audio controller
Serial ATA controller
Fast PCI ATA/33/66/100 IDE controller
Four COM, seven USB2.0, PC/104 connector
Hardware Monitor function
LVDS Panel display interface (optional)
TV-Out function (optional)
©Copyright 2005 CyberResearch, Inc
®
CyberResearch CPU Cards
1.2
CPBH Series
Specifications
„ CPU: PGA 478 for Intel® Pentium® 4 CPU with Hyper-Threading
„
„
„
„
„
„
„
„
„
„
„
„
„
„
„
„
„
„
„
„
„
„
„
„
„
„
Technology up to 3.2GHz
Bus Interface: PICMG Bus
Front Side Bus: Supports 400/533/800MHz FSB
Memory: Two DDR sockets supporting DDR-266/333/400 up to 2GB
Chipset: Intel® 82865GV/82801EB
I/O Chipset: Winbond W83627
ISA Bridge: ITE IT8888 (16-bit)
VGA: Intel® 82865GV with 1MB/8MB/16MB shared main memory
supporting CRT display up to 1600 x 1200 at 32-bit colors at 60Hz
LVDS Panel: Supports LVDS interface (optional)
TV-Out: Supports PAL or NTSC TV systems (optional)
LAN: Intel® 82562EZ 10/100 Based (or 82547EI 100/1000 Based) and
82540 100/1000 Based LAN
Audio: AC97 3D audio controller
Serial ATA: Intel® ICH5 controller and with two ports supporting transfer
rate up to 150MB/sec.
IDE: Four IDE disk drives supporting ATA/33/66/100 and with transfer
rates of up to 33/66/100MB/sec.
FDD: Supports up to two floppy disk drives
Parallel: One enhanced bi-directional parallel port supporting
SPP/ECP/EPP
Serial Port: 16C550 UART-compatible RS-232/422/485 x 1 and RS-232
x 3 serial ports with 16-byte FIFO
PC/104: PC/104 connector for 16-bit ISA Bus
IrDA: One IrDA TX/RX header
USB: Seven USB2.0 ports, six internal and one external
Keyboard/Mouse: PS/2 6-pin Mini DIN
BIOS: Award PnP Flash BIOS
Watchdog Timer: Software programmable time-out intervals from
1~256sec.
CMOS: Battery backup
Temperature: 0~60°C (operating)
Hardware Monitor: Winbond W83627
Board Size: 33.8(L) x 12.1(W) cm
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
3
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CPBH Series
1.3
4
CyberResearch CPU Cards
Board Dimensions
©Copyright 2005 CyberResearch, Inc
®
CyberResearch CPU Cards
CPBH Series
Chapter 2
Unpacking
2.1
Opening the Delivery Package
The CPBH is packed in an anti-static bag. The board has components
that are easily damaged by static electricity. Do not remove the
anti-static wrapping until proper precautions have been taken. Safety
Instructions in front of this manual describe anti-static precautions and
procedures.
2.2
Inspection
After unpacking the board, place it on a raised surface and carefully
inspect the board for any damage that might have occurred during
shipment. Ground the board and exercise extreme care to prevent
damage to the board from static electricity.
Integrated circuits will sometimes come out of their sockets during
shipment. Make sure all integrated circuits, particularly the BIOS,
processor, memory modules, ROM-Disk, and keyboard controller chip
are firmly seated. The CPBH delivery package contains the following
items:
„
„
„
„
„
„
CPBH Board x 1
Utility CD Disk x 1
Cables Package x 1
Cooling Fan x 1
Jumper Bag x 1
User’s Manual
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
5
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
CPBH Series
NO.
1
2
3
4
5
6
7
8
9
10
®
CyberResearch CPU Cards
Cables Package
Description
ATA/100 IDE flat cable x 2
Floppy flat cable x 1
MIC/Audio 8-pin cable + 2 phone jacks x 1
Serial ATA cable x 1
Two COM + RCA jack x 1
PS/2 KB/MS transfer cable x 1
5-pin ATX power cable x 1
8-pin USB split type cable with bracket x 1
Two COM flat cable with bracket x 1
Parallel port flat cable with bracket x 1
It is recommended that you keep all the parts of the delivery package
intact and store them in a safe/dry place for any unforeseen event
requiring the returned shipment of the product. In case you discover
any missing and/or damaged items from the list of items, please
contact your dealer immediately.
6
©Copyright 2005 CyberResearch, Inc
®
CyberResearch CPU Cards
CPBH Series
Chapter 3
Hardware Installation
This chapter provides the information on how to install the hardware
using the CPBH. This chapter also contains information related to
jumper settings of switch, watchdog timer selection, etc.
3.1
Before Installation
After confirming your package contents, you are now ready to install
your hardware. The following are important reminders and steps to
take before you begin with your installation process.
1.
Make sure that all jumper settings match their default settings
and CMOS setup correctly. Refer to the sections on this chapter
for the default settings of each jumper. (Set JP3 1-2)
2.
Go through the connections of all external devices and make
sure that they are installed properly and configured correctly
within the CMOS setup. Refer to the sections in this chapter for
the detailed information on the connectors.
3.
Keep the manual and diskette in good condition for future
reference and use.
4.
Make sure your power supply is you use is for P4 only. One of
4-pin connectors is for +12V lead which should be connected
to CN1 connector of the CPBH.
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
7
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CPBH Series
3.2
8
CyberResearch CPU Cards
Board Layout
©Copyright 2005 CyberResearch, Inc
®
CyberResearch CPU Cards
3.3
Jumper List
Jumper
JP1/JP2/JP4/JP5
JP3
3.4
CPBH Series
Default Setting
Setting Page
Use RS-232 or RS-422/485 Select:
2-3 Short
RS-232
Clear CMOS: Normal Operation
1-2 Short
16
20
Connector List
Connector
Definition
Page
CN1/CN5
CN3(1-3-5-7)
CN3(9-11)
CN3(13-15)
CN3(2-4-6-8)
CN3(10-12)
CN3(14-16)
CN4
CN7/CN6
CN21/CN8/CN12/CN14
CN9
CN10
CN11
CN13/CN16/CN17
CN15
CN18
CN19
CN20
CN22
CN23
CN24
DM1/DM2
J1
J2
J3
J5
J6 / J7
FN1 / FN2 / FN3
PC2 / PC3
4-pin/20-pin ATX Power Connectors
Speaker Connector
Reset Button Connector
HDD LED Switch
Power LED Connector
2-pin ATX Power ON/OFF Connector
Green LED Connector
IrDA Connector
Primary/Secondary IDE Connectors
COM1~COM4 Connectors (5x2 header)
Parallel Connector
FDD Connector
RS-422/485 Connector (5x2 header)
USB2.0 Connectors
MIC In/Audio Out Connector
Dual RJ-45 Connector
External USB Connector
15-pin CRT Connector
PS/2 6-pin Mini DIN KB/MS Connector
5-pin ATX Power Connector
Line In Connector
DDR Sockets
Inverter Power Connector
LVDS Connector
LVDS Connector
TV-Out Connector
Serial ATA Connector
Fan Power Connector
PC/104 64-pin/40-pin Connector
20
22
22
22
22
22
22
17
13
16
18
15
16
19
24
19
19
10
22
20
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
10
10
10
10
24
12
20
25
9
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CPBH Series
3.5
CyberResearch CPU Cards
Configuring the CPU
The CPBH offers the convenience in CPU installation with its
auto-detect feature. After installing a new microprocessor onboard, the
CPBH automatically identifies the frequency and clock speed of the
installed microprocessor chip, thereby eliminating the need for user to
do additional CPU configuration or hardware settings related to it.
The CPBH provides 400MHz/533MHz/800MHz FSB, and the all-in-one
solution for the latest Intel® Pentium 4 processor with 800MHz FSB and
Hyper-Threading Technology.
NOTE:
3.6
CPU Vcore should be located in the range of 0.8375V to
1.6V, otherwise system won’t boot.
System Memory
The CPBH provides two DDR sockets at locations DM1 and DM2. The
maximum capacity of the onboard memory is 2GB. 800MHz FSB CPU
can support DDR-266/333/400, 533MHz FSB CPU can support
DDR-266/333, and 400MHz FSB CPU can support DDR-266.
FSB \ Memory CLK
DDR-266
DDR-333
DDR-400
800MHz FSB
533MHz FSB
400MHz FSB
Yes
Yes
Yes
Yes
Yes
No
Yes
No
No
3.7
VGA Controller
The onboard Intel® 82865GV with 1MB/8MB/16MB (default) memory
supports CRT displays up to 1600 x 1200 x 32-bit. The CPBH provides
two methods of connecting VGA device. CN20 offers a single standard
CRT connector (DB15). And J2, J3 offers LVDS Panel connectors.
10
©Copyright 2005 CyberResearch, Inc
®
CyberResearch CPU Cards
CPBH Series
z CN20: 15-pin CRT Connector (DB15)
PIN
Description
PIN
Description
1
3
5
7
9
11
13
15
Red
Blue
GND
GND
N/C
N/C
HSYNC
SCL
2
4
6
8
10
12
14
Green
N/C
GND
GND
GND
SDA
VSYNC
6
1
5
11
10
15
z J1: Inverter Power Connector
4
6
5
GND
3
ENAVDD
2
ENABKL
1
VCC5
VCC12
VCC12
VCC5
ENABKL
ENAVDD
GND
VCC12
1
2
3
4
5
6
VCC12
PIN Description
VCC3
GND
A0M
A1M
A2M
A0P
GND
VCC3
GND
VCC3
2
A4M
14
A1P
1
A2P
13
A5M
VCC3
GND
A0P
A1P
A2P
CLK1P
A3P
A6M
2
4
6
8
10
12
14
CLK1P
VCC3
GND
A0M
A1M
A2M
CLK1M
A3M
A3P
1
3
5
7
9
11
13
A3M
PIN Description PIN Description
CLK1M
z J3: LVDS Panel Connector
z J2: LVDS Panel Connector
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
14
2
VCC3
1
A4P
13
GND
VCC3
GND
A4P
A5P
A6P
CLK2P
A7P
A5P
2
4
6
8
10
12
14
A6P
VCC3
GND
A4M
A5M
A6M
CLK2M
A7M
A7P
CLK2P
1
3
5
7
9
11
13
A7M
CLK2M
PIN Description PIN Description
11
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CPBH Series
3.8
CyberResearch CPU Cards
Serial ATA Function
You can connect the Serial ATA device to this connector which
provides you high speed transfer rates (150MB/sec.). If you wish to use
RAID function, please note that these two Serial ATA connectors just
support RAID0 and only compatible with WIN XP.
z J7: Serial ATA Connector
SATA0RXP
GND
7
SATA0RXN
1
GND
GND
SATA0TXP
SATA0TXN
GND
SATA0RXN
SATA0RXP
GND
SATA0TXN
1
2
3
4
5
6
7
GND
Description
SATA0TXP
PIN
z J6: Serial ATA Connector
GND
SATA1RXN
SATA1RXP
7
GND
1
SATA1TXN
GND
SATA1TXP
SATA1TXN
GND
SATA1RXN
SATA1RXP
GND
GND
Description
1
2
3
4
5
6
7
SATA1TXP
PIN
IDE and Serial ATA Device Configurations
Following are the IDE and Serial ATA device configurations supported
by Intel ICH5 specifications.
Native operating systems (OS) are Windows 2000/XP. ICH5 supports
a maximum of six devices using these OS.
Legacy OS are MS-DOS, Windows 95/98/Me/NT4.0. ICH5 supports a
maximum of four devices using these OS.
Operating System
IDE
Serial ATA
WIN 2000/XP
WIN 95/98/Me/NT4.0
12
Primary/Secondary
Primary
Secondary
Primary/Secondary
Port0/Port1
Port0/Port1
Port0/Port1
----
©Copyright 2005 CyberResearch, Inc
®
CyberResearch CPU Cards
3.9
CPBH Series
PCI E-IDE Drive Connector
CN7 and CN6 are standard 40-pin daisy-chain driver connectors that
serve the PCI E-IDE drive provisions onboard the CPBH. A maximum
of four ATA/33/66/100 IDE drives can be connected to the CPBH via
CN7 and CN6.
z CN7: Primary IDE Connector
PIN
Description
PIN
Description
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
RESET
PDATA 7
PDATA 6
PDATA 5
PDATA 4
PDATA 3
PDATA 2
PDATA 1
PDATA 0
GND
PDREQ
PIOW#
PIOR#
PIORDY
RPDACKInterrupt
PDA1PDA0PDCS1HDD Active P
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
GND
PDATA 8
PDATA 9
PDATA 10
PDATA 11
PDATA 12
PDATA 13
PDATA 14
PDATA 15
N/C
GND
GND
GND
PR1PD1GND
N/C
PATA66
PDA2RPCS3GND
4
6
8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38
2
40
1
39
3
5
7
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
9 11 13 15 17 19 21 23 25 27 29 31 33 35 37
13
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CPBH Series
z
CyberResearch CPU Cards
CN6: Secondary IDE Connector
PIN
Description
PIN
Description
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
RESET
SDATA 7
SDATA 6
SDATA 5
SDATA 4
SDATA 3
SDATA 2
SDATA 1
SDATA 0
GND
SDREQ
SIOW#
SIOR#
SIORDY
SDDACKInterrupt
SDA1SDA0SDCS1HDD Active S
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
GND
SDATA 8
SDATA 9
SDATA 10
SDATA 11
SDATA 12
SDATA 13
SDATA 14
SDATA 15
N/C
GND
GND
GND
PR1SD1GND
N/C
SATA66
SDA2SDCS3GND
4
8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38
2
40
1
39
3
14
6
5
7
9 11 13 15 17 19 21 23 25 27 29 31 33 35 37
©Copyright 2005 CyberResearch, Inc
®
CyberResearch CPU Cards
CPBH Series
3.10 Floppy Disk Drive Connector
The CPBH uses a standard 34-pin header connector, CN10, for floppy
disk drive connection. A total of two FDD drives may be connected to
CN10 at any given time.
z CN10: FDD Connector
DSKCHG#
HDSEL#
PDATA#
WRTPRT#
TRAK00#
WGATE#
WDATA#
’
STEP#
DIR#
MTR1#
DRVDEN0
N/C
DRVDEN1
INDEX#
MTR0#
DS1#
DS0#
MTR1#
DIR#
STEP#
WDATA#
WGATE#
TRAK00#
WRTPRT#
RDATA#
HDSEL#
DSKCHG#
DS0#
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
DS1#
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
MTR0#
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
INDEX#
Description
DRVDEN1
PIN
N/C
Description
DRVDEN0
PIN
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
33
GND
1
GND
34
GND
2
15
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CPBH Series
CyberResearch CPU Cards
3.11 Serial Port Connectors
The CPBH's CN21, CN8, CN12 and CN14 provide four high speed
NS16C550 compatible UART with Read/Receive 16 byte FIFO
serial ports.
z CN21: COM1 Connector (5x2 Header)
PIN Description PIN Description
1
3
5
7
9
DCD0
RXDD0
TXDD0
DTR0
GND
2
4
6
8
10
DSR0
RTS0
CTS0
RI0
N/C
DCD0 1
2 DSR0
RXDD0 3
4 RTS0
TXDD0
5
6 CTS0
DTR0
7
8 RI0
GND
9
10 N/C
z CN8: COM2 Connector (5x2 Header)
PIN Description PIN Description
1
3
5
7
9
DCD1
RXDD1
TXDD1
DTR1
GND
2
4
6
8
10
DSR1
RTS1
CTS1
RI1
N/C
DCD1 1
2 DSR1
RXDD1 3
4 RTS1
TXDD1
5
6 CTS1
DTR1
7
8 RI1
GND
9
10 N/C
z CN12: COM3 Connector (5x2 Header)
PIN Description PIN Description
1
3
5
7
9
16
DCD2
RXDD2
TXDD2
DTR2
GND
2
4
6
8
10
DSR2
RTS2
CTS2
RI2
N/C
DCD2 1
2 DSR2
RXDD2 3
4 RTS2
TXDD2
5
6 CTS2
DTR2
7
8 RI2
GND
9
10 N/C
©Copyright 2005 CyberResearch, Inc
®
CyberResearch CPU Cards
CPBH Series
z CN14: COM4 Connector (5x2 Header)
PIN Description PIN Description
1
3
5
7
9
DCD3
RXDD3
TXDD3
DTR3
GND
2
4
6
8
10
DSR3
RTS3
CTS3
RI3
N/C
DCD3 1
2 DSR3
RXDD3 3
4 RTS3
TXDD3
5
6 CTS3
DTR3
7
8 RI3
GND
9
10 N/C
The onboard COM2 may be configured as RS-232, RS-422, or
RS-485.
z CN11: RS-422/485 Connector (5x2 Header)
PIN Description PIN Description
1
3
5
7
9
TXRX+
GND
RTS+
CTS-
2
4
6
8
10
TX+
RXRTSCTS+
N/C
TX- 1
2 TX+
RX+ 3
4 RX-
GND
5
RTS+
7
6 RTS8 CTS+
CTS-
9
10 N/C
z JP1/JP2/JP4/JP5: COM2 Use RS-232 or RS-422/485 Select
Options
Settings
RS-232 (default)
RS-422/485
Short 2-3
Short 1-2
1
3
3.12 IrDA Connector
CN4 is a 5-pin internal FIR communication connector for connection of
an IrDA device.
z
CN4: IrDA Connector
PIN
Description
1
2
3
4
5
VCC
N/C
IRRX
GND
IRTX
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
VCC
1
N/C
2
IRRX
3
GND
4
IRTX
5
17
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CPBH Series
CyberResearch CPU Cards
3.13 Parallel Connector
CN9 is a standard 26-pin flat cable connector designed to
accommodate parallel port connection onboard the CPBH.
z CN9: Parallel Connector
Description
GND
GND
GND
GND
Auto Form Feed
ERROR#
Initialize
Printer Select LN#
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
N/C
N/C
N/C
Printer Select LN#
Initialize
ERROR
14
15
16
17
18
19
20
21
22
23
24
25
26
Printer Select
Paper Empty
Busy
Acknowledge
PDD7
PDD6
PDD5
PDD4
PDD3
25
PDD2
1
PDD1
26
PDD0
2
Strobe
18
Description PIN
Strobe
DATA 0
DATA 1
DATA 2
DATA 3
DATA 4
DATA 5
DATA 6
DATA 7
Acknowledge
Busy
Paper Empty
Printer Select
Auto Form Feed
1
2
3
4
5
6
7
8
9
10
11
12
13
N/C
PIN
©Copyright 2005 CyberResearch, Inc
®
CyberResearch CPU Cards
CPBH Series
3.14 Ethernet Connector
The CPBH provides one 10/100 and one 100/1000 OR two 10/100
Base-TX LAN interface connectors. Please refer to the following for its
pin information.
z CN18: Dual RJ-45 Connector
PIN Description PIN Description
1
3
5
7
9
11
13
15
TX+
RX+
R/C GND
R/C GND
TTX+B
RRX+B
TTX+C
RRX+C
2
4
6
8
10
12
14
16
1
2
TXR/C GND
RXR/C GND
TTX-B
RRX-B
TTX-C
RRX-C
TX+
TXRX+
R/C GND
R/C GND
RXR/C GND
R/C GND
7
8
9
10
TTX+B
TTX-B
RRX+B
RRX-B
TTX+C
TTX-C
RRX+C
RRX-C
15
16
Giga LAN
3.15 USB Connector
The CPBH provides three internal 8-pin USB2.0 and one 4-pin external
USB2.0 connectors, at locations CN13, CN16, CN17 and CN19 for
seven USB2.0 connections to the CPBH.
GND
BD1+
7
GND
1
BD0+
8
BD2+
2
BD0-
VCC
BD1BD1+
GND
BD2-
2
4
6
8
VCC
VCC
BD0BD0+
GND
VCC
1
3
5
7
VCC
PIN Description PIN Description
BD1-
z CN16: USB0/USB1 Connector
PIN Description PIN Description
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
2
8
1
7
GND
VCC
BD2BD2+
GND
BD3+
2
4
6
8
BD3-
VCC
BD3BD3+
GND
VCC
1
3
5
7
GND
z CN17: USB2/USB3 Connector
19
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CPBH Series
CyberResearch CPU Cards
GND
BD4+
2
8
1
7
GND
VCC
BD4BD4+
GND
BD5+
2
4
6
8
BD5-
VCC
BD5BD5+
GND
VCC
1
3
5
7
VCC
PIN Description PIN Description
BD4-
z CN13: USB4/USB5 Connector
z CN19: External USB Connector
PIN Description
VCC
BD6BD6+
GND
GND
BD6+
4
BD6-
1
VCC
1
3
5
7
3.16 CMOS Data Clear
The CPBH has a Clear CMOS jumper on JP3.
z JP3: Clear CMOS
Optional
Settings
Normal Operation (default)
Clear CMOS
Short 1-2
Short 2-3
1
3
IMPORTANT: Before you turn on the power of your system, please
set JP3 to short 1-2 for normal operation.
3.17 Power and Fan Connectors
The CPBH provides one 4-pin and one 20-pin ATX power connectors
at CN1 and CN5.
The CPBH must use P4 power supply. One of 4-pin connectors is for
+12V lead which should be connected to CN1.
A 20-pin ATX Power Connector can be connected to Backplane or to
CN5. If a 20-pin ATX Power Connector connects to Backplane, please
make sure CN23 and Backplane’s 5-pin ATX controller is connected
together!
IMPORTANT: Please plug CN1 (4-pin ATX power connector) before
CN5 (20-pin ATX power connector) for protecting
hardware circuit.
20
©Copyright 2005 CyberResearch, Inc
®
CyberResearch CPU Cards
CPBH Series
z CN1: 4-pin ATX Power Connector
PIN Description PIN Description
1
3
GND
+12V
2
4
GND
+12V
1
2
GND
GND
+12V
+12V
3
4
z CN5: 20-pin ATX Power Connector
PIN Description PIN Description
20
+3.3V
11
1
10
+12V
GND
GND
+5V
+5V
GND
+5Vsb
GND
GND
PWORK
+5V
PS_ON
+5V
GND
-5V
+3.3V
+3.3V
-12V
GND
PS_ON
GND
GND
GND
-5V
+5V
+5V
-12V
11
12
13
14
15
16
17
18
19
20
GND
+3.3V
+3.3V
GND
+5V
GND
+5V
GND
PWORK
+5Vsb
+12V
+3.3V
1
2
3
4
5
6
7
8
9
10
z
CN23: 5-pin ATX Power Connector
PIN Description PIN Description
1
3
5
VCC
+12V
GND
2
4
5Vsb
PS_ON
1
5
Connector FN1, FN2 and FN3 onboard CPBH are 3-pin fan power
connectors.
z FN1~FAN3: Fan Power Connectors
PIN
Description
1
2
3
GND
+12V
Fan In 1
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
1
3
21
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CPBH Series
CyberResearch CPU Cards
3.18 Keyboard/Mouse Connector
The CPBH offers one possibility for keyboard/mouse connection. The
connections are done via CN22 for an external PS/2 type
keyboard/mouse.
z CN22: PS/2 6-pin Mini DIN Keyboard Connector
PIN
Description
1
2
3
4
5
6
Keyboard Data
Mouse Data
GND
+5V
Keyboard Clock
Mouse Clock
Keyboard
Clock
3 GND
5
Keyboard
1 Data
Mouse
Clock
6
2 Mouse
Data
4 +5V
3.19 System Front Panel Connectors
The CPBH has one system front panel connectors at location CN3 that
indicates the power-on status. This visual feature of the IDE LED may
also be connected to an external IDE LED via connector CN3(13-15).
Connector CN3 Orientation
SPEAKER
RST_SW
HDD_LED
1
2
3
4
5
6
7
8
9
10
11
12
PWR LED
PWR Button
13 14
Green LED
15 16
z CN3: System Front Panel Connector
PIN
1
3
5
7
9
11
13
15
22
Description PIN
VCC
GND
N/C
CDR
GND
Reset
VCC
HDD_LED
2
4
6
8
10
12
14
16
Description
VCC
VCC
GND
GND
PS_ON
5VSB
VCC
Green_LED
©Copyright 2005 CyberResearch, Inc
®
CyberResearch CPU Cards
CPBH Series
3.20 Watchdog Timer
Once the Enable cycle is active, a Refresh cycle is requested before
the time-out period. This restarts counting of the WDT period. When
the time counting goes over the period preset of WDT, it will assume
that the program operation is abnormal. A System Reset signal will
re-start when such error happens.
The following sample programs show how to Enable, Disable and
Refresh the Watchdog Timer:
;---------------------------------------------------------------------------------; Enter the WDT function mode, interruptible double-write
;---------------------------------------------------------------------------------MOV
DX, 2EH
MOV
AL, 87H
OUT
DX, AL
OUT
DX, AL
MOV
DX, 2EH
MOV
AL, 07H
OUT
DX, AL
MOV
DX, 2FH
MOV
AL, 08H
OUT
DX, AL
MOV
DX, 2EH
MOV
AL, F5H
OUT
DX, AL
; select CRF0
MOV
DX, 2FH
MOV
AL, 80H
OUT
DX, AL
MOV
DX, 2EH
MOV
AL, F7H
OUT
DX, AL
MOV
DX, 2FH
MOV
AL, 00H
OUT
DX, AL
MOV
DX, 2EH
MOV
AL, F6H
OUT
DX, AL
MOV
DX, 2FH
MOV
AL, 00H
; * 00H=Disabled
OUT
DX, AL
;--------------------------------------------------------------------------------; Exit extended function mode
;------------- ------------------------------------------------------------------MOV
DX, 2EH
MOV
AL, AAH
OUT
DX, AL
* User can also use AL, 00H’s defined time for reset purposes, e.g.00H
for Disable, 01H = 1sec, 02H = 2sec…..FFH = 255sec.
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
23
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CPBH Series
CyberResearch CPU Cards
3.21 Audio Connectors
The CPBH has an onboard AC97 3D audio interface. The following
table list the pin assignments of the MIC In/Audio Out connector.
z
CN15: MIC In/Audio Out Connector
PIN
Description
PIN
Description
1
3
5
7
AOUT_L
GND
MIC IN
GND
2
4
6
8
AOUT_R
GND
N/C
GND
z
2
8
1
7
CN24: Line In Connector
PIN
Description
PIN
Description
1
2
Line R
GND
3
4
GND
Line L
1
4
3.22 TV-Out Function
The CPBH can support TV-Out function whose input could be up to 800
x 600 graphics resolutions. World Wide Video standards are supported
including NTSC-M (North America, Taiwan), NTSC-J (Japan), PAL-B,
D, G, H, I (Europe, Asia), PAL-M (Brazil), PAL-N (Uruguay, Paraguay)
and PAL-NC (Argentina).
z
J5: TV-Out Connector
PIN Description PIN Description
1
24
GND
2
TVCVB
©Copyright 2005 CyberResearch, Inc
®
CyberResearch CPU Cards
CPBH Series
3.23 PC/104 Connectors
The PC/104 expansion bus offers provisions to connect all types of
PC/104 modules. With the PC/104 bus being known as the new
generation of industrial embedded 8-bit PC standard bus, thousands of
PC/104 modules from multiple vendors can be easily installed onboard.
The detailed pin assignment of the PC/104 expansion bus connectors
PC2 and PC3 are listed on the following tables:
NOTE: The PC/104 connector allows direct plugging or stack-through
piling of PC/104 modules without requiring the PC/104 mounting
kit.
z PC3: PC/104 40-pin Connector
PIN
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Description PIN Description
GND
MEMCS16*
IOSC16*
IRQ10
IRQ11
IRQ12
IRQ15
IRQ14
DACK0*
DRQ0
DACK5*
DRQ5
DACK6*
DRQ6
DACK7*
DRQ7
+5V
MASTER*
GND
GND
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
GND
SBHE*
LA23
LA22
LA21
LA20
LA19
LA18
LA17
MEMR*
MEMW*
SD8
SD9
SD10
SD11
SD12
SD13
SD14
SD15
GND
Connector diagram
rotated 90 degrees
clockwise from
original position
1
21
20
40
25
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CPBH Series
CyberResearch CPU Cards
z PC2: 64-pin PC/104 Expansion Slot
PIN
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
26
Description PIN Description
IOCHECK*
SD7
SD6
SD5
SD4
SD3
SD2
SD1
SD0
IOCHRDY
AEN
SA19
SA18
SA17
SA16
SA15
SA14
SA13
SA12
SA11
SA10
SA9
SA8
SA7
SA6
SA5
SA4
SA3
SA2
SA1
SA0
GND
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
GND
RESETDRV
+5V
IRQ9
-5V
DRQ2
-12V
0WS*
+12V
GND
SMEMW*
SMEMR*
IOW*
IOR*
DACK3*
DRQ3
DACK1*
DRQ1
REFRESH*
SYSCLK
IRQ7
IRQ6
IRQ5
IRQ4
IRQ3
DACK2*
TC
BALE
+5V
OSC
N/C
GND
Connector diagram
rotated 90 degrees
clockwise from
original position
1
33
32
64
©Copyright 2005 CyberResearch, Inc
®
CyberResearch CPU Cards
CPBH Series
Chapter 4
Award BIOS Setup
The CPBH uses Award BIOS for the system configuration. The Award
BIOS setup program is designed to provide the maximum flexibility in
configuring the system by offering various options that could be
selected for end-user requirements. This chapter is written to assist
you in the proper usage of these features.
4.1
Starting Setup
The Award BIOS is immediately activated when you first power on the
computer. The BIOS reads the system information contained in the
CMOS and begins the process of checking out the system and
configuring it. When it finishes, the BIOS will seek an operating system
on one of the disks and then launch and turn control over to the
operating system.
While the BIOS is in control, the Setup program can be activated in one
of two ways:
1. By pressing <Del> immediately after switching the system on, or
2. By pressing the <Del> key when the following message appears
briefly at the bottom of the screen during the POST (Power On Self
Test).
Press DEL to enter SETUP.
If the message disappears before you respond and you still wish to
enter Setup, restart the system by turning it OFF and then ON, or
pressing the "RESET" button on the system case. You may also restart
by simultaneously pressing <Ctrl>, <Alt>, and <Delete> keys. If you do
not press the keys at the correct time and the system does not boot, an
error message will be displayed and you will again be asked to...
PRESS F1 TO CONTINUE, DEL TO ENTER SETUP
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
27
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CPBH Series
4.2
CyberResearch CPU Cards
Using Setup
In general, you use the arrow keys to highlight items, press <Enter> to
select, use the <PageUp> and <PageDown> keys to change entries,
press <F1> for help and press <Esc> to quit. The following table
provides more details about how to navigate in the Setup program
using the keyboard.
Up arrow
Down arrow
Left arrow
Right arrow
Esc key
PgUp key
PgDn key
+ key
- key
F1 key
(Shift)F2 key
F3 key
F4 key
F5 key
F6 key
F7 key
F8 key
F9 key
F10 key
Move to previous item
Move to next item
Move to the item in the left hand
Move to the item in the right hand
Main Menu -- Quit and not save changes into CMOS
Status Page Setup Menu and Option Page Setup Menu -Exit current page and return to Main Menu
Increase the numeric value or make changes
Decrease the numeric value or make changes
Increase the numeric value or make changes
Decrease the numeric value or make changes
General help, only for Status Page Setup Menu and Option
Page Setup Menu
Change color from total 16 colors. F2 to select color
forward, (Shift) F2 to select color backward
Calendar, only for Status Page Setup Menu
Reserved
Restore the previous CMOS value from CMOS, only for
Option Page Setup Menu
Load the default CMOS value from BIOS default table, only
for Option Page Setup Menu
Load the default
Reserved
Reserved
Save all the CMOS changes, only for Main Menu
4.2.1 Getting Help
Press F1 to pop up a small help window that describes the appropriate
keys to use and the possible selections for the highlighted item. To exit
the Help Window press <Esc> or the F1 key again.
28
©Copyright 2005 CyberResearch, Inc
®
CyberResearch CPU Cards
4.3
CPBH Series
Main Menu
Once you enter the Award BIOS CMOS Setup Utility, the Main Menu
will appear on the screen. The Main Menu allows you to select from
several setup functions and two exit choices. Use the arrow keys to
select among the items and press <Enter> to enter the sub-menu.
Phoenix – AwardBIOS CMOS Setup Utility
` Standard CMOS Features
` Frequency/Voltage Control
` Advanced BIOS Features
Load Fail-Safe Defaults
` Advanced Chipset Features
Load Optimized Defaults
` Integrated Peripherals
Set Supervisor Password
` Power Management Setup
Set User Password
` PnP/PCI Configurations
Save & Exit Setup
` PC Health Status
Exit Without Saving
Esc:Quit F9:Menu in BIOS
F10:Save & Exit Setup
ÇÈÆÅ:Select Item
Time, Date, Hard Disk Type…
NOTE:
A brief description of the highlighted choice appears at the bottom
of the screen.
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
29
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CPBH Series
4.4
CyberResearch CPU Cards
Standard CMOS Features
The Standard Setup is used for the basic hardware system
configuration. The main function is for Data/Time and Floppy/Hard Disk
Drive settings. Please refer to the following screen for the setup. When
the IDE hard disk drive you are using is larger than 528MB, you must
set the HDD mode to LBA mode. Please use the IDE Setup Utility in
BIOS SETUP to install the HDD correctly.
Phoenix – AwardBIOS CMOS Setup Utility
Standard CMOS Features
Date (mm:dd:yy)
Time (hh:mm:ss)
X IDE Primary Master
X IDE Primary Slave
X IDE Secondary Master
X IDE Secondary Slave
Mon, Mar 8 2004
13 : 48 : 22
[None]
[None]
[None]
[None]
Drive A
Drive B
[1.44M, 3.5in.]
[None]
Video
Halt On
[EGA/VGA]
[All, Errors]
Base Memory
Extended Memory
Total Memory
Item Help
Menu Level
X
Change the day, month,
year and century
640K
252928K
253952K
ÇÈÆÅ: Select Item + / - /PU/PD: Value
F10: Save ESC: Quit F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults F7: Optimized Defaults
30
©Copyright 2005 CyberResearch, Inc
®
CyberResearch CPU Cards
4.5
CPBH Series
Advanced BIOS Features
This section allows you to configure your system for the basic
operation. You have the opportunity to select the system’s default
speed, boot-up sequence, keyboard operation, shadowing and
security.
Phoenix – AwardBIOS CMOS Setup Utility
Advanced BIOS Features
Virus Warning
CPU L1 & L2 Cache
CPU L3 Cache
Hyper-Threading Technology
Quick Power On Self Test
First Boot Device
Second Boot Device
Third Boot Device
Boot Other Device
Swap Floppy Drive
Boot Up Floppy Seek
Boot Up Num Lock Status
Gate A20 Option
Typematic Rate Setting
Typematic Rate (Chars/Sec)
Typematic Delay (Msec)
Security Option
APIC Mode
MPS Version Control For OS
OS Select For DRAM > 64MB
Report NO FDD for WIN 95
Full Screen LOGO Show
Small Logo (EPA) Show
Disabled
Enabled
Enabled
Enabled
Enabled
Floppy
HDD-0
CDROM
Enabled
Disabled
Enabled
On
Fast
Disabled
6
250
Setup
Enabled
1.4
Non-OS2
NO
Disabled
Disabled
Item Help
Menu Level
X
Change the day, month,
year and century
ÇÈÆÅ: Select Item + / - /PU/PD: Value
F10: Save ESC: Quit F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults F7: Optimized Defaults
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
31
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CPBH Series
4.6
CyberResearch CPU Cards
Advanced Chipset Features
This section allows you to configure the system based on the specific
features of the installed chipset. This chipset manages bus speeds and
the access to the system memory resources, such as DRAM and the
external cache. It also coordinates the communications between the
conventional ISA and PCI buses. It must be stated that these items
should never be altered. The default settings have been chosen
because they provide the best operating conditions for your system.
You might consider and make any changes only if you discover that the
data has been lost while using your system.
Phoenix – AwardBIOS CMOS Setup Utility
Advanced Chipset Features
DRAM Timing Selectable
CAS Latency Time
Active to Precharge Delay
DRAM RAS# to CAS# Delay
DRAM RAS# Precharge
Memory Frequency For
System BIOS Cacheable
Video BIOS Cacheable
Memory Hole At 15M-16M
Delay Prior to Thermal
AGP Aperture Size (MB)
Init Display First
** ON-chip VGA Setting **
On-chip VGA
On-chip Frame Buffer size
Boot Display
Panel Scaling
Panel Number
TV Standard
Video Connector
TV Format
By SPD
2
8
4
4
Auto
Enabled
Enabled
Disabled
16 Min
128
PCI Slot
Item Help
Menu Level
X
Change the day, month,
year and century
Enabled
16MB
Auto
Auto
1
Off
Automatic
Auto
ÇÈÆÅ: Select Item + / - /PU/PD: Value
F10: Save ESC: Quit F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults F7: Optimized Defaults
32
©Copyright 2005 CyberResearch, Inc
®
CyberResearch CPU Cards
4.7
CPBH Series
Integrated Peripherals
The IDE hard drive controllers can support up to two separate hard
drives. These drives have a master/slave relationship that is
determined by the cabling configuration used to attach them to the
controller. Your system supports two IDE controllers--a primary
and a secondary--so you can install up to four separate hard disks.
PIO means Programmed Input/Output. Rather than having the
BIOS issue a series of commands to affect the transfer to or from
the disk drive, PIO allows the BIOS to tell the controller what it
wants and then let the controller and the CPU perform the
complete task by them. This is much simpler and more efficient
(also faster).
Phoenix – AwardBIOS CMOS Setup Utility
Integrated Peripherals
OnChip IDE Device
Onboard Device
SuperIO Device
[Press Enter]
[Press Enter]
[Press Enter]
Item Help
Menu Level
X
ÇÈÆÅ: Select Item + / - /PU/PD: Value
F10: Save ESC: Quit F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults F7: Optimized Defaults
Phoenix – AwardBIOS CMOS Setup Utility
OnChip IDE Device
IDE HDD Block Mode
On-Chip Primary PCI IDE
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Primary Master UDMA
IDE Primary Slave UDMA
On-Chip Secondary PCI IDE
IDE Secondary Master PIO
IDE Secondary Slave PIO
IDE Secondary Master UDMA
IDE Secondary Slave UDMA
*** On-Chip Serial ATA Setting ***
On-Chip Serial ATA
Serial ATA Port0 Mode
Serial ATA Port1 Mode
[Enabled]
[Enabled]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
Item Help
Menu Level
X
[Auto]
[Primary Master]
[Primary Master]
ÇÈÆÅ: Select Item + / - /PU/PD: Value
F10: Save ESC: Quit F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults F7: Optimized Defaults
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
33
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CPBH Series
CyberResearch CPU Cards
Phoenix – AwardBIOS CMOS Setup Utility
Onboard Device
USB Controller
USB 2.0 Controller
USB Keyboard Support
USB Mouse Support
AC97 Audio
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Auto]
Item Help
Menu Level
X
ÇÈÆÅ: Select Item + / - /PU/PD: Value
F10: Save ESC: Quit F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults F7: Optimized Defaults
Phoenix – AwardBIOS CMOS Setup Utility
SuperIO Device
POWER ON Function
[BUTTON ONLY]
Item Help
KB Power ON Password
[Enter]
Menu Level
X
Hot Key Power ON
[Ctrl-F1]
Onboard FDC Controller
[Enabled]
Onboard Serial Port 1
[3F8/IRQ4]
Onboard Serial Port 2
[2F8/IRQ3]
UART Mode Select
[Normal]
RXD , TXD Active
[Hi, Lo]
IT Transmission Delay
[Enabled]
UR2 Duplex Mode
[Half]
Use IR Pins
[IR-RX2TX2]
Onboard Parallel Port
[378/IRQ7]
Parallel Port Mode
[SPP]
ECP Mode Select
[EPP1.7]
ECP Mode Use DMA
[3]
PWRON After PWR-Fail
[Off]
Mini Port Address
[Disabled]
Mini Port IRQ
5
Onboard Serial Port 3
[3E8]
Serial Port 3 Use IRQ
[IRQ10]
Onboard Serial Port 4
[2E8]
Serial Port 4 Use IRQ
[IRQ11]
ÇÈÆÅ: Select Item + / - /PU/PD: Value
F10: Save ESC: Quit F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults F7: Optimized Defaults
34
©Copyright 2005 CyberResearch, Inc
®
CyberResearch CPU Cards
4.8
CPBH Series
Power Management Setup
The Power Management Setup allows user to configure the system for
saving energy in a most effective way while operating in a manner
consistent with his own style of computer use.
Phoenix – AwardBIOS CMOS Setup Utility
Power Management Setup
ACPI function
[Enabled]
ACPI Suspend Type
[S1(POS)]
Run VGABIOS if S3 Resume
Auto
Power Management
[User Define]
Video off Method
[DPMS]
Video off In Suspend
[Yes]
Suspend Type
[Stop Grant]
MODEM Use IRQ
[3]
Suspend Mode
[Disabled]
HDD Power Down
[Disabled]
Soft-off by PWR-BTTN
[Instant-Off]
CPU THRM-throttling
[50.0%]
Wake-up by PCI card
[Enabled]
Power On by Ring
[Enabled]
Wake Up On LAN
[Enabled]
USB KB Wake-up From S3
Disabled
Resume by Alarm
[Disabled]
Date(of Month) Alarm
0
Time(hh:mm:ss) Alarm
0:0:0
** Reload Global Timer Events **
Primary IDE 0
[Disabled]
Primary IDE 1
[Disabled]
Secondary IDE 0
[Disabled]
Secondary IDE 1
[Disabled]
FDD, COM, LPT Port
[Disabled]
PCI PIRQ[A-D]#
[Disabled]
Item Help
Menu Level
X
Change the day, month,
year and century
ÇÈÆÅ: Select Item + / - /PU/PD: Value
F10: Save ESC: Quit F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults F7: Optimized Defaults
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
35
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CPBH Series
4.9
CyberResearch CPU Cards
PnP/PCI Configurations
This section describes configuring the PCI bus system. PCI, or
Peripheral Components Interconnect, is a system that allows I/O
devices to operate at speeds nearing the speed the CPU itself uses
when communicating with its own special components. This section
covers some very technical items and it is strongly recommended that
only experienced users should make any changes to the default
settings.
Phoenix – AwardBIOS CMOS Setup Utility
PnP/PCI Configurations
PNP OS Installed
Reset Configuration Data
[No]
[Disabled]
Resources Controlled By
IRQ Resources
DMA Resources
[Auto(ESCD)]
Press Enter
Press Enter
PCI/VGA Palette Snoop
[Disabled]
Item Help
Menu Level
X
ÇÈÆÅ: Select Item + / - /PU/PD: Value
F10: Save ESC: Quit F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults F7: Optimized Defaults
4.10 PC Health Status
Phoenix – AwardBIOS CMOS Setup Utility
PC Health Status
CPU Warning Temperature
Current System Temp.
Current CPU1 Temperature
Current System FAN Speed:
Current CPU FAN Speed
Current Chassis FAN Speed
Vcore
+3.3V
+5V
+12V
-12V
-5V
VBAT(V)
5VSB(V)
Shutdown Temperature
[Disabled]
Item Help
Menu Level
X
[Disabled]
ÇÈÆÅ: Select Item + / - /PU/PD: Value
F10: Save ESC: Quit F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults F7: Optimized Defaults
36
©Copyright 2005 CyberResearch, Inc
®
CyberResearch CPU Cards
CPBH Series
4.11 Frequency/Voltage Control
Phoenix – AwardBIOS CMOS Setup Utility
Frequency/Voltage Control
CPU Clock Ratio
Auto Detect DIMM/PCI Clk
Spread Spectrum
[8X]
[Enabled]
[Disabled]
Item Help
Menu Level
X
Change the day, month,
year and century
ÇÈÆÅ: Select Item + / - /PU/PD: Value
F10: Save ESC: Quit F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults F7: Optimized Defaults
4.12 Load Fail-Safe Defaults
When you press <Enter> on this item you will get a confirmation dialog
box with a message shown below. This option allows you to
load/restore the BIOS default values permanently stored in the BIOS
ROM. Pressing ‘Y’ loads the BIOS default values for the most stable,
minimal-performance system operations.
Phoenix – AwardBIOS CMOS Setup Utility
X STANDARD CMOS Features
X
X
X
X
X
X
X Frequency/Voltage Control
Advanced BIOS Features
Load Fail-Safe Defaults
Advanced Chipset Features
Load Optimized Defaults
Integrated Peripherals
Set Supervisor Password
Power Management
word
Load Fail-Safe Defaults (Y/N)? N
PnP/PCI Configura
etup
PC Health Status
Saving
Esc : Quit
Ç È Æ Å : Select Item
F10 : Save & Exit Setup
Load Fail-Safe Defaults
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
37
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CPBH Series
CyberResearch CPU Cards
4.13 Load Optimized Defaults
When you press <Enter> on this item you get a confirmation dialog box
with a message similar to the figure below. This option allows you to
load/restore the default values to your system configuration, optimizing
and enabling all high performance features. Pressing ‘Y’ loads the
default values that are factory settings for optimal performance system
operations.
Phoenix – AwardBIOS CMOS Setup Utility
X Standard CMOS Features
X
X
X
X
X
X
X Frequency/Voltage Control
Advanced BIOS Features
Load Fail-Safe Defaults
Advanced Chipset Features
Load Optimized Defaults
Integrated Peripherals
Set Supervisor Password
Power Management
word
Load Optimized Defaults (Y/N)? N
PnP/PCI Configura
etup
PC Health Status
Saving
Esc : Quit
Ç È Æ Å : Select Item
F10 : Save & Exit Setup
Load Optimized Defaults
38
©Copyright 2005 CyberResearch, Inc
®
CyberResearch CPU Cards
CPBH Series
4.14 Set Supervisor/User Password
Phoenix – AwardBIOS CMOS Setup Utility
X Standard CMOS Features
X
X
X
X
X
X
Advanced BIOS Features
Advanced Chipset Features
Integrated Peripherals
Power Management Setup
PnP/PCI Configurati Enter Password :
PC Health Status
Esc : Quit
X Frequency/Voltage Control
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
t Setup
ut Saving
Ç È Æ Å : Select Item
F10 : Save & Exit Setup
Change / Set / Disable Password
You can set either supervisor or user password, or both of them. The
differences between are:
z supervisor password: can enter and change the options of the setup
menus.
z user password: just can only enter but do not have the right to change the
options of the setup menus.
When you select this function, the following message will appear at the
center of the screen to assist you in creating a password.
ENTER PASSWORD:
Type the password, up to eight characters in length, and press
<Enter>. The password typed now will clear any previously entered
password from CMOS memory. You will be asked to confirm the
password. Type the password again and press <Enter>. You may also
press <Esc> to abort the selection and not enter a password.
PASSWORD DISABLED.
To disable a password, just press <Enter> when you are prompted to
enter the password. A message will confirm the password and then will
be disabled. Once the password is disabled, the system will boot and
you can enter Setup freely.
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
39
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CPBH Series
CyberResearch CPU Cards
When a password has been enabled, you will be prompted to enter it
every time you try to enter Setup. This prevents an unauthorized
person from changing any part of your system configuration.
Additionally, when a password is enabled, you can also require the
BIOS to request a password every time your system is rebooted. This
would prevent unauthorized use of your computer.
You determine when the password is required within the BIOS
Features Setup Menu and its Security option (see Section 3). If the
Security option is set to “System”, the password will be required both at
boot and at entry to Setup. If set to “Setup”, prompting only occurs
when trying to enter Setup.
4.15 Save & Exit Setup
Pressing <Enter> on this item asks for confirmation:
Pressing “Y” stores the selections made in the menus in CMOS – a
special section of memory that stays on after you turn your system off.
The next time you boot your computer, the BIOS configures your
system according to the Setup selections stored in CMOS. After saving
the values the system is restarted.
Phoenix – AwardBIOS CMOS Setup Utility
X Standard CMOS Features
X
X
X
X
X
X
X Frequency/Voltage Control
Advanced BIOS Features
Load Fail-Safe Defaults
Advanced Chipset Features
Load Optimized Defaults
Integrated Peripherals
Set Supervisor Password
Power Management
word
SAVE to CMOS and EXIT (Y/N)? N
PnP/PCI Configura
etup
PC Health Status
Saving
Esc : Quit
Ç È Æ Å : Select Item
F10 : Save & Exit Setup
Save Data to CMOS
40
©Copyright 2005 CyberResearch, Inc
®
CyberResearch CPU Cards
CPBH Series
4.16 Exit Without Saving
Pressing <Enter> on this item asks for confirmation:
Quit without saving (Y/N)? Y
This allows you to exit Setup without storing in CMOS any change. The
previous selections remain in effect. This exits the Setup utility and
restarts your computer.
Phoenix – AwardBIOS CMOS Setup Utility
X Standard CMOS Features
X Frequency/Voltage Control
X Advanced BIOS Features
Load Fail-Safe Defaults
X Advanced Chipset Features
Load Optimized Defaults
X Integrated Peripherals
Set Supervisor Password
X Power Management
word
Quit Without Saving (Y/N)? N:
X PnP/PCI Configura
etup
X PC Health Status
Saving
Esc : Quit
Ç È Æ Å : Select Item
F10 : Save & Exit Setup
Abandon all Data
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
41
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CPBH Series
CyberResearch CPU Cards
This Page is intentionally left blank.
42
©Copyright 2005 CyberResearch, Inc
®
CyberResearch CPU Cards
CPBH Series
Chapter 5
Software Utilities
This chapter contains the detailed information of IDE, VGA, LAN and
Audio driver installation procedures. The utility disk that came with the
delivery package contains an auto-run program that invokes the
installation programs for the IDE, VGA, LAN and Audio drivers. The
following sections describe the installation procedures of each driver
based on Win 95/98, Win 2000 and Win NT operating systems. It is
recommended that you install the drivers matching the sections listed
in this chapter.
5.1
IDE Driver Installation
5.1.1 Installing Intel Chipset Software Utility
1.
Insert Utility CD Disk into your CD ROM drive. Click “Install
Drivers” then click the “CPBH” button.
2.
Then click on the Operating System link below “Chipset:” path,
as seen above.
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
43
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
CPBH Series
®
CyberResearch CPU Cards
3.
Immediately after clicking the IDE button in Step 1, the program
launches the InstallShield Wizard that will assist you in the
installation process. Click on the Next > button to proceed.
4.
The Intel OEM Software License Agreement dialog box then
appears on the screen. Choose Yes to proceed.
44
©Copyright 2005 CyberResearch, Inc
®
CyberResearch CPU Cards
CPBH Series
5.
When the Readme Information dialog box pops up, just click on
the Next button to proceed.
6.
Once the Install Shield Wizard finishes updating your system, it
will prompt you to restart the computer. Tick on the “Yes, I
want to restart my computer now” followed by a click on
the Finish button to reboot. Only after your computer boots will
the new settings take effect.
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
45
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
CPBH Series
5.2
®
CyberResearch CPU Cards
VGA Driver Installation
1.
Insert Utility CD Disk into your CD ROM drive. Click “Install
Drivers” then click the “CPBH” button.
2.
Then click on the appropriate Operating System link below the
“VGA:” path, as seen above.
3.
When the dialog box below appears, make sure you close all
other Windows applications and then click on the Next > button
to proceed.
46
©Copyright 2005 CyberResearch, Inc
®
CyberResearch CPU Cards
CPBH Series
4.
Immediately after clicking the IDE button in Step 1, the program
launches the InstallShield Wizard that will assist you in the
installation process. Click on the Next > button to proceed.
5.
The Intel OEM Software License Agreement dialog box then
appears on the screen. Choose Yes to proceed.
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
47
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
CPBH Series
6.
®
CyberResearch CPU Cards
Once the setup program finishes copying files into your system, it
will prompt you to restart the computer. Tick on the “Yes, I
want to restart my computer now” followed by a click on the
Finish button to reboot. Only after your computer boots will the
new settings take effect.
5.3
LAN Driver Installation
5.3.1 Win 95/98/2K/XP
1.
Insert Utility CD Disk into your CD ROM drive. Click “Install
Drivers” then click the “CPBH” button.
2.
Then click on the appropriate Operating System link below the
“LAN:” path, as seen above.
48
©Copyright 2005 CyberResearch, Inc
®
CyberResearch CPU Cards
CPBH Series
3.
The Intel OEM Software License Agreement dialog box then
appears on the screen. Choose Accept to proceed.
4.
When the dialog box below appears, make sure the folder you’ll
save file in, then Click on the Next >
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
49
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
CPBH Series
®
CyberResearch CPU Cards
5.
When the dialog box below appears, make sure you close all
other Windows applications and then click on the Install Base
Driver button to proceed.
6.
Once the setup program finishes copying files into your system, it
will prompt you to restart the computer. Tick on the Restart
now to reboot. Only after your computer boots will the new
settings take effect.
5.3.2 Win NT
NOTE:
1.
50
Please make sure you have already installed Service Pack 6.0.
The system automatically detects the absence of Windows NT
Networking. Click on the Yes button to start installation.
©Copyright 2005 CyberResearch, Inc
®
CyberResearch CPU Cards
CPBH Series
2.
Tick on the Wired to Network once the following screen
appears. Click on Next > to proceed.
3.
Click on the Start Search button for the program to locate the
Network Adapter.
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
51
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
CPBH Series
®
CyberResearch CPU Cards
4.
Once setup finishes the search, it will list a number of adapters
for you to choose from. Press on the Have Disk button to assign
the driver path location.
5.
Setup now asks you for the location of the driver. When you have
entered the new driver path, press on the OK button to continue.
52
©Copyright 2005 CyberResearch, Inc
®
CyberResearch CPU Cards
CPBH Series
6.
When Setup finds the information it needs about the new driver,
it will display the device it found on the following screen. If using
82562EZ, please choose “Intel(R) PRO/100 Family
Adapter”. If using 82540EM or 82547EI, please choose
“Intel(R) PRO/1000 Family Adapter”. Press on the OK
button to accept and proceed.
7.
Setup then returns to Network Setup Wizard screen and displays
your new Network Adapter. Click on Next to continue.
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
53
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
CPBH Series
®
CyberResearch CPU Cards
8.
The Network Setup Wizard then allows you to set the Network
Protocols on your network. Select the appropriate protocol and
then click on Next to continue.
9.
Before Setup starts installing the components found and the
settings you made, it will give you the option to proceed or go
back for changes from the following screen. Click on the Next
button once you are sure of your devices.
54
©Copyright 2005 CyberResearch, Inc
®
CyberResearch CPU Cards
CPBH Series
10. Windows NT Setup will then need to copy files necessary to
update the system information. Specify the path and then press
Continue.
11. When Setup asks if you wish to change the TCP/IP settings of
your system, select them appropriately. The default choice is No.
12. Setup then starts the Networking installation and copies the files.
13. When the screen below appears, click on Next to continue.
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
55
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
CPBH Series
®
CyberResearch CPU Cards
14. Setup then prompts you that it is ready to start the network. You
may complete the installation thereafter. Click on Next to
continue.
15. Assign the workgroup or domain setting of your computer. Click
on Next to continue.
56
©Copyright 2005 CyberResearch, Inc
®
CyberResearch CPU Cards
CPBH Series
16. Click on the Yes button to restart your computer. The LAN1
driver installation for WIN NT4.0 is now complete.
17. With the Utility CD Disk still in your CD ROM drive, we can install
LAN2. Right click on “Network Neighborhood” icon from the
desktop. Select on Properties and then proceed to the Network
from the main menu. Click on Add to continue.
18. Setup then returns to Network Setup Wizard screen and displays
your new Network Adapter. Click on OK to continue.
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
57
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
CPBH Series
®
CyberResearch CPU Cards
19. Click on the Close button. The LAN2 driver installation for WIN
NT4.0 is now complete.
5.4
58
Audio Driver Installation
1.
Insert Utility CD Disk into your CD ROM drive. Click “Install
Drivers” then click the “CPBH” button.
2.
Then click on the Operating System link below the “Audio:”
path, as seen above.
©Copyright 2005 CyberResearch, Inc
®
CyberResearch CPU Cards
3.
4.
CPBH Series
When the dialog box below appears, make sure you close
all other Windows applications and then click on the Next
> button to proceed.
Once the InstallShield Wizard completes the operation and
update of your AC’97 driver, it will ask you to remove disks from
their drives, and prompt you to restart your system. Tick on the
“Yes, I want to restart my computer now”. Afterwards, click
on the Finish button to complete the installation process. The
system changes you made will take effect after the system
restarts.
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
59
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
CPBH Series
5.5
®
CyberResearch CPU Cards
USB2.0 Driver Installation
5.5.1 Win 95/98
1.
Insert Utility CD Disk into your CD ROM drive. Click “Install
Drivers” then click the “CPBH” button.
2.
Then click on the appropriate Operating System link below the
“LAN:” path, as seen above.
The Intel OEM Software License Agreement dialog box then
appears on the screen. Choose Yes to proceed.
3.
60
©Copyright 2005 CyberResearch, Inc
®
CyberResearch CPU Cards
4.
CPBH Series
Once the setup program finishes copying files into your system, it
will prompt you to restart the computer. Tick on the “Yes, I
want to restart my computer now” followed by a click on the
Close button to reboot. Only after your computer boots will the
new settings take effect.
5.5.2 Win 2000
1.
2.
With the Utility CD Disk still in your CD ROM drive, right click on
“My Computer” icon from the Windows menu. Select on System
Properties and then proceed to the Device Manager from the
main menu.
Select on Other Devices from the list of devices and then
double-click on Universal Serial Bus (USB) Controller.
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
61
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
CPBH Series
®
CyberResearch CPU Cards
3.
The Universal Serial Bus (USB) Controller Properties screen then
appears, allowing you to re-install the driver. Select Update
Driver from the main menu to proceed.
4.
When the dialog box below appears, make sure you close all
other Windows applications and then click on the Next > button
to proceed.
62
©Copyright 2005 CyberResearch, Inc
®
CyberResearch CPU Cards
CPBH Series
5.
Click on the “Search for a suitable driver for my device
(recommended)” once the following screen appears. Click on
the Next to proceed.
6.
Once the program returns to the Add New Hardware Wizard
screen, your specified location will appear. Press on the Next
button to continue
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
63
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
CPBH Series
®
CyberResearch CPU Cards
7.
Choose sisusb2.inf and press on the Open button to accept and
proceed.
8.
Once the InstallShield Wizard completes the operation and
update of your USB2.0 driver, click on the Finish button to
complete the installation process.
64
©Copyright 2005 CyberResearch, Inc
®
CyberResearch CPU Cards
CPBH Series
5.5.3 Win XP
NOTE: Please make sure you have already installed Service
Pack1.
1.
With the Utility CD Disk still in your CD ROM drive, right click on
“My Computer” icon from the Windows menu. Select on
System Properties and then proceed to the Device Manager from
the main menu.
2.
Tick on the “Install the software automatically
(Recommended)” once the following screen appears. Click on
the Next > to proceed.
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
65
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
CPBH Series
3.
66
®
CyberResearch CPU Cards
Once the InstallShield Wizard completes the operation and
update of your USB2.0 driver, click on the Finish button to
complete the installation process.
©Copyright 2005 CyberResearch, Inc
®
CyberResearch CPU Cards
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
CPBH Series
67
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
CPBH Series
68
®
CyberResearch CPU Cards
©Copyright 2005 CyberResearch, Inc
®
CyberResearch CPU Cards
CPBH Series
Product Service
Diagnosis and Debug
CyberResearch, Inc. maintains technical support lines staffed by experienced
Applications Engineers and Technicians. There is no charge to call and we will
return your call promptly if it is received while our lines are busy. Most problems
encountered with data acquisition products can be solved over the phone. Signal
connections and programming are the two most common sources of difficulty.
CyberResearch support personnel can help you solve these problems, especially
if you are prepared for the call.
To ensure your call’s overall success and expediency:
1)
2)
3)
4)
5)
6)
Have the phone close to the PC so you can conveniently and quickly take
action that the Applications Engineer might suggest.
Be prepared to open your PC, remove boards, report back-switch or
jumper settings, and possibly change settings before reinstalling the
modules.
Have a volt meter handy to take measurements of the signals you are
trying to measure as well as the signals on the board, module, or power
supply.
Isolate problem areas that are not working as you expected.
Have the source code to the program you are having trouble with available
so that preceding and prerequisite modes can be referenced and
discussed.
Have the manual at hand. Also have the product’s utility disks and any
other relevant disks nearby so programs and version numbers can be
checked.
Preparation will facilitate the diagnosis procedure, save you time, and avoid
repeated calls. Here are a few preliminary actions you can take before you call
which may solve some of the more common problems:
1)
2)
3)
4)
Check the PC-bus power and any power supply signals.
Check the voltage level of the signal between SIGNAL HIGH and SIGNAL
LOW, or SIGNAL+ and SIGNAL– . It CANNOT exceed the full scale range
of the board.
Check the other boards in your PC or modules on the network for address
and interrupt conflicts.
Refer to the example programs as a baseline for comparing code.
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
69
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CyberResearch CPU Cards
CPBH Series
Intentionally Blank
70
©Copyright 2005 CyberResearch, Inc.
®
CyberResearch CPU Cards
CPBH Series
Warranty Notice
CyberResearch, Inc. warrants that this equipment as furnished will be free from
defects in material and workmanship for a period of one year from the confirmed
date of purchase by the original buyer and that upon written notice of any such
defect, CyberResearch, Inc. will, at its option, repair or replace the defective item
under the terms of this warranty, subject to the provisions and specific exclusions
listed herein.
This warranty shall not apply to equipment that has been previously repaired or
altered outside our plant in any way which may, in the judgment of the manufacturer,
affect its reliability. Nor will it apply if the equipment has been used in a manner
exceeding or inconsistent with its specifications or if the serial number has been
removed.
CyberResearch, Inc. does not assume any liability for consequential damages as a
result from our products uses, and in any event our liability shall not exceed the
original selling price of the equipment.
The equipment warranty shall constitute the sole and exclusive remedy of any Buyer
of Seller equipment and the sole and exclusive liability of the Seller, its successors
or assigns, in connection with equipment purchased and in lieu of all other
warranties expressed implied or statutory, including, but not limited to, any implied
warranty of merchant ability or fitness and all other obligations or liabilities of seller,
its successors or assigns.
The equipment must be returned postage prepaid. Package it securely and insure it.
You will be charged for parts and labor if the warranty period has expired.
Returns and RMAs
If a CyberResearch product has been diagnosed as being non-functional, is visibly
damaged, or must be returned for any other reason, please call for an assigned
RMA number. The RMA number is a key piece of information that lets us track and
process returned merchandise with the fastest possible turnaround time.
PLEASE CALL FOR AN RMA NUMBER!
Packages returned without an RMA number will be refused!
In most cases, a returned package will be refused at the receiving dock if its
contents are not known. The RMA number allows us to reference the history of
returned products and determine if they are meeting your application’s requirements.
When you call customer service for your RMA number, you will be asked to provide
information about the product you are returning, your address, and a contact person
at your organization.
Please make sure that the RMA number is prominently
displayed on the outside of the box.
• Thank You •
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
71
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CyberResearch CPU Cards
CPBH Series
Intentionally Blank
72
©Copyright 2005 CyberResearch, Inc.
CyberResearch, Inc.
25 Business Park Drive
Branford, CT 06405 USA
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
Download PDF

advertising