Owner`s manual | Daewoo dqd-2100d DVD Player User Manual

TV / DVD COMBO
OWNER'S MANUAL
Model: DTD-14H9
IMPORTANT SAFEGUARDS
IMPORTANT SAFEGUARDS
1 Read Instructions - All the safety and operating instructions should be read before the appliance is
operated.
2 Retain Instructions - The safety and operating instructions should be retained for future reference.
3 Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to.
4 Follow Instructions - All operating and use instructions should be followed.
5 Cleaning - Unplug TV/DVD from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
6 Attachments - Do not use attachments not recommended by the TV/DVD manufacturer as they may cause
hazards.
7 Water and Moisture - The apparatus shall not be exposed to dripping or splashing water and that no
object filled with liquids, such as vases, shall be placed on the apparatus.
PORTABLE CABINET WARNING
8 Accessories - Do not place this TV/DVD on an unstable cabinet, stand,
bracket, or table. The TV/DVD may fall, causing serious injury to someone,
and serious damage to the appliance. Use only with a cabinet, stand, bracket,
or table recommended by the manufacturer, or sold with the TV/DVD. Any mounting
of the appliance should follow the manufacturer’s instructions and use a mounting
accessory recommended by the manufacturer. An appliance and cart combination
should be moved with care. Quick stops, excessive force, and uneven surfaces may
cause the appliance and cabinet combination to overturn.
9 Ventilation - Slots and openings in the cabinet and the back or bottom are provided for ventilation and to
ensure reliable operation of the TV/DVD to protect it from overheating, and these openings must not be
blocked or covered. The openings should never be blocked by placing the TV/DVD on a bed, sofa, rug, or
other similar surface. This TV/DVD should never be placed near or over a radiator or heat register. This
TV/DVD should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is
provided or the manufacturer’s instructions have been adhered to. Around the unit, the space should be more
than 10cm.
10 Power Sources - This TV/DVD should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or
local power company.
11 Grounding or Polarization - This TV/DVD is equipped with a polarized alternating - current line plug (a
plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a
safety feature. If you are unable to insert the plug fully into the outlet, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the polarized plug.
12 Power-Cord Protection - Power-supply cords should be routed so that they are not likely to be walked
on or pinched by items placed upon or against them, paying particular attention to cords at plugs, and the
point where they exit from the appliance.
13 Lightning - For added protection for this TV/DVD receiver during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or
cable system. This will prevent damage to the TV/DVD due to lightning and power-line surges.
1
14 Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an
outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as
contact with them might be fatal.
15 Overloading - Do not overload wall outlets and extension cords as this can result in a risk of fire or
electric shock.
16 Object and Liquid Entry - Never push objects of any kind into this TV/DVD through openings as they
may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill
liquid of any kind on the TV/DVD.
17 Servicing - Do not attempt to service this TV/DVD yourself as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
18 Damage Requiring Service - Unplug this TV/DVD from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
A. When the power-supply cord or plug is damaged or frayed.
B. If liquid has been spilled, or objects have fallen into the TV/DVD.
C. If the TV/DVD has been exposed to rain or water.
D. If the TV/DVD does not operate normally by following the operating instructions. Adjust only those controls
that are covered by the operating instructions, as improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to restore the TV/DVD to its
normal operation.
E. If the TV/DVD has been dropped or damaged in any way.
F. When the TV/DVD exhibits a distinct change in performance - this indicates a need for service.
19 Replacement Parts - When replacement parts are required, be sure the service technician has used
replacements parts specified by the manufacturer that have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards.
20 Safety Check - Upon completion of any service or repairs to this TV/DVD, ask the service technician to
perform routine safety checks to determine that the TV/DVD is in proper operating condition.
21 Heat - This TV/DVD product should be situated away from heat sources such as radiators, heat registers,
stoves, or other products (including amplifiers) that produce heat.
22 Secondary Switch - When switching off, the apparatus is not completely switched off from the mains. To
disconnect it from the mains, you have to unplug mains.
2
IMPORTANT SAFEGUARDS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient magnitude to constitute a risk electric shock.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and servicing instructions in the literature
accompanying the appliance.
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
IMPORTANT FOR LASER PRODUCTS
LASER
This Digital Video Disc Player employs a Laser System. To ensure proper use of this product
please read this owner’s manual carefully and retain for future reference. Should the unit
require maintenance, contact an authorized service location - see service procedure. Use of
control adjustments or the performance of procedures other than those specified may result
in hazardous radiation exposure.
To prevent direct exposure to the laser beam, do not try to open the enclosure.
DANGER
Visible laser radiation when open and interlock failed or defeated.
Avoid direct exposure to beam.
CAUTION
Do not open the top cover. There are no user serviceable parts
inside the Unit; leave all servicing to qualified service
personnel.
CLASS 1
LASER PRODUCT
CAUTION : Any changes or modification in construction of this device which are not
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
3
Table of Contents
Before use ....
DVD Operation ....
IMPORTANT SAFEGUARDS
1
Table of Contents
4
Identification of Controls
5
Remote Control
7
Installation ....
Basic Installation
Connecting to Various Equipment
10
11
Basic TV operation ....
Watching TV
13
TELETEXT
14
Setting TV
15
Advantages of this Product Are
Playing the DVD video disc
Basic Playback
Playing a desired scene
To skip scenes in a disc
Directly moving to a desired title
Playing Programmed order
Repeating a defined period
Repeating a defined period from
A to B
Searching DVD with a title number,
a chapter number or a time
Searching VCD, CD and MP3 with a
track or track time
22
23
23
24
24
24
25
25
26
26
27
Confirming the current PLAY mode on screen
28
Confirming the current DVD disc mode
Confirming the current SVCD disc mode
Confirming the current VCD disc mode
Confirming the current CD,MP3, JPEG
disc mode
28
28
29
29
Selecting an AUDIO language, SUBTITLE
language and 3D AUDIO
30
Selecting an audio language
Selecting a subtitle language
Selecting 3D Audio
30
30
30
To Display the Setting Screen
15
Setting Picture
16
Selecting ZOOM and Multi Angle
31
Setting Sound
17
Using a zoom function
Multi Angle
31
31
Installing Channels
18
About MP3 and JPEG discs
32
Setting Other Features
21
Playing a disc containing MP3, JPEG files
Displaying menus in a disc
To display menus in a disc
LANGUAGE Setup
VIDEO Setup
AUDIO Setup
Other Setup
32
34
34
35
36
36
37
Others
About DVD
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public
performance and lending of discs are prohibited.
Playable Disc
REGION MANGEMENT Information
Terms related with DVD
Disc
Region Code
Before suspecting fauls with the DVD
Before Calling Service Personnel
Specification
38
38
38
39
40
40
41
42
43
4
Identification of Controls
Main Body (Front Part)
Speaker Left
Disc Loading
Speaker Right
Tray
POWER button (Power of TV/DVD is fully intercepted.)
OPEN/CLOSE button (For opening /closing disc tray)
PREVIOUS button
PLAY/PAUSE button
NEXT button
STOP button
REMOTE SENSOR
STAND-BY indicator
TV/AV/DVD MODE CONVERT button
TV VOLUME button
TV CHANNEL button
5
Identification of Controls
Main Body (Rear Part)
POWER
CORD
SCART Jack
CONNECTION
to ANTENNA
CABLE
6
Remote Control
Remote Control Buttons
POWER button
If you press POWER button on remocon under the POWER button in the
front part of TV/DVD, you can turn on/off the TV/DVD.
DISPLAY button
Operating status and GUI(Graphic User Interface) menu are displayed in
a screen.
TV/AV, DVD button
You can select input mode.
NORMAL button
NORMAL I/ NORMAL II/ FAVOURITE picture control
NUMBER button
You can enter the relevant number directly or select a desired channel.
SLEEP button
You can set automatic POWER OFF(0, 20, 40, 60, 80, 100, 120).
F.R/SLOW or F.F/SLOW button
You can search screen whilst playing back or forward.
Slow screen is displayed whilst pausing.
STOP button
PREV/NEXT(BACK STEP/STEP) button
You can skip a screen whilst playing back or forward.
Back Step/Step screen is displayed whilst pausing.
PLAY/PAUSE button
Start playback of the disc contents. Pause screen whilst playing.
TV MENU button
The Menu screen relating to TV is displayed.
VOLUME button
CURSOR(
), CHANNEL SELECT button
This button functions as cursor or channel select button in setting
TV/DVD and operating TV respectively.
MUTE button
Press this button if you only want to turn off the sound.
OK/ENTER button
Press this button if TV or DVD setting is complete.
7
Remote Control
DVD MENU button
The DVD menu screen is displayed.
AUDIO button
You can select the desired audio language.
SUBTITLE button
You can select the desired subtitle language.
DISC TRAY OPEN/CLOSE button
SETUP button
You can set the DVD player.
REPEAT button
You move into REPEAT mode whenever you press this button.
A-B REPEAT button
You can play the given sections repeatedly.
TITLE/PBC button
You can select the desired title.
Angle button
You can select the desired screen angle.
ZOOM button
You can zoom in a screen.
PROGRAM button
You can program the desired playing order.
CLEAR button
You can clear settings.
SEARCH button
You can search the scene that you want.
SOUND MODE button
You can select the desired audio mode when watching TV.
ASPECT button
You can modify TV Aspect in TV/AV/DVD Mode.
3D button
You can set Sound Fields.
8
Basic Installation
Connecting the Antenna Cable
Outdoor antenna or
wall antenna outlet
If TV picture is not clear, it usually result from the wrong antenna connection.
Please install the antenna in the proper place and in the right direction.
Connecting a SCART SOCKET
This connection is used to connect this player to an external device (VCR, CAMCORDER, DVD) and to
be displayed in TV/DVD. If the peripheral is powered on in TV mode, some peripherals are converted into
AV mode automatically and displayed. Otherwise, you should press the TV/AV/DVD button to convert into
AV mode. Pin specification of SCART SOCKET is as follows.
PIN
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Signal Designation
Audio Out (linked with 3)
Audio In (linked with 6)
Audio Out (linked with 1)
Audio Earth
Blue Earth
Audio In (linked with 2)
Blue In
Slow (Function) Switching
Green Earth
NC
Green In
NC
Red Earth
NC
Red In
Rapid Blanking, Switching
Video Earth
Rapid Blanking Earth
Video Out
Video In
Common Earth
Matching Values
0.5Vrms, Imp < 1kΩ(RF 60% MOD)
0.5Vrms, Imp > 10kΩ
0.5Vrms, Imp < 1kΩ(RF 60% MOD)
0.5Vrms, Imp > 10kΩ
0.7Vp-p±10%, Imp 75Ω
TV:0~2V, 16:9: 4~8V, Peri:9.5~12V, Imp>10kΩ
0.7Vp-p±10%, Imp 75Ω
0.7Vp-p±10%, Imp 75
0.7Vp-p±10%, Imp 75
Logic 0: 0~0.4V, Logic 1: 1~3V, Imp 75Ω
1.0 Vp-p±10%, Imp 75Ω
1.0 Vp-p±10%, Imp 75Ω
10
Connecting to Various Equipment
Connecting to a Camcorder or Other Video Player
Connection with SCART Jack (AV)
Connect the SCART jack of your video player (or camcorder) to SCART terminal of TV/DVD with SCART
jack.
11
Watching TV
13
1
2
To turn on the TV, press the [ON/OFF] button in the front
3
4
Adjusting the Volume.
part of the set. Now TV set is in STANDBY status.
Then, press the power button on the remote control.
Selecting the Channel.
Press the PR [ , ] button or [Number] button to select the desired
channel. If input status is set to AV or DVD, press the [TV/AV/DVD] button
to select TV.
Press the [ VOL] button to decrease the volume level or [VOL
increase the volume level.
To turn off the TV, press the [
control.
] button to
] button on the remote
Pressing the ON/OFF button of the set will clear the clock memory. If you
press the power button on the remote control instead of pressing the
ON/OFF button in the front part of the set, The set will be stand-by state.
And stand-by LED becomes RED.
TELETEXT
SWITCHING TELETEXT ON/OFF
Press the TELETEXT button ( ). The index page viewed last will appear. Press the TELETEXT button to return to the
TV mode.
COLOUR BUTTONS IN TELETEXT
A red, green, yellow and cyan field is shown at the bottom of the screen.If FASTEXT is transmitted by the station,
by pressing the corresponding cursor button on the remote controller you can easily select the desired page .
SELECTING PAGES
The NUMBER buttons 0...9 are used to enter a page number. The selected page number appears at the top of
the screen and the page appears after a short time. The UP/DOWN buttons increase or decrease the current
page number by 1.
INDEX PAGE
You can switch directly to the overview page of the station you are currently viewing by pressing the INDEX
button ( ).
PAGE HOLD
Several sub pages can be combined under a page number and are scrolled at an interval determined by the TV
station. The presence of sub pages is indicated by, for example, 3/6 beneath the time, which means that you
are looking at the 3rd page of a total of 6 pages.
If you want to look at a subpage for a longer period of time, press the HOLD button ( ). The contents of the
subpage shown are kept on the screen and no longer updated or switched to other subpages. Pressing the HOLD
button again, the current subpage appears.
CALLING UP SUBPAGE DIRECTLY
Pressing the SUBPAGE button ( ) “Page no/...” appears at the bottom of the screen. Enter the subpage number
that you want to call up with the NUMBER button 0...9, for example, the 2nd page. sequence 0002. The desired
subpage is sought and displayed after a while. To exit, press SUBPAGE button ( ) again.
WATCHING TELEVISION DURING TELETEXT MODE
Some pages are continually updated, for example, stock market reports, sports announcement, and the latest
news. If you want to watch TV and stay informed at the same time, press CANCEL button ( ).
The regular programme is still visible and the teletext symbol ( ) appears at the top of
the screen. Pressing the CANCEL button again, the teletext page appears with the updated information.
REVEAL ANSWER
This function can be used on certain pages to reveal the solution of riddles. Press the REVEAL button (
reveal a hidden answer and press again to hide it.
) to
TV/TELETEXT ( )
Watch the TV programme and the Teletext pages simultaneously. The next press returns to the normal display.
BRIGHTNESS CONTROL IN TELETEXT MODE
Press the MENU button in teletext mode, the brightness control menu will be displayed in the bottom of the
screen. You can adjust brightness using the corresponding cursor button on the remote controller.
DOUBLING CHARACTER SIZE
Repeatedly pressing the SIZE button ( ) doubles the character size in the following order.
Upper half of the page Lower half of the page Return to normal size.
14
Setting TV
To Display the Setting Screen
1
Press the [TV MENU] button in TV
mode.
PICTURE
SOUND
TV setting menu is displayed.
INSTALL
FEATURES
Position
MENU Exit
2
Press the [
,
OK Access
] button to select the desired item.
Current settings and variable settings for the desired item are displayed in the
screen.
• PICTURE
• SOUND
• INSTALL
• FEATURES
15
3
Press the [OK] button and press the [
4
Press the [TV MENU] button to exit the current setting menu.
,
] button to set the
desired item, then press the [OK/ENTER] button.
Additional steps may be required as items.
Setting TV
Setting Picture
1
Press the [ , ] button in TV
setting screen to select “PICTURE”
and press the [OK] button.
Setting menu is displayed.
PICTURE
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
Position
MENU Exit
2
Adjust
Press the [ , ] button to select the desired item, then press
the [ , ] button to set the desired item.
Current settings and variable settings for the desired item are displayed in the
screen.
• BRIGHTNESS: Adjust the picture until correct brightness is obtained.
• CONTRAST: Adjust brightness and darkness among objects and background
in the screen.
• COLOUR: Adjust colour to display natural human’s face colours.
• SHARPNESS: Adjust outlines of objects on screen to be smooth and clear.
• TINT: TINT adjustment is displayed if you receive NTSC through
AV input.
3
Press the [TV MENU] button after setting is completed.
16
Setting TV
Setting Sound
1
Press the [ , ] button in TV setting
screen to select “SOUND”, then
press the [OK] button.
Setting menu is displayed.
SOUND
VOLUME
BALANCE
BASS
TREBLE
EFFECTS
MONO
Position
MENU Exit
2
Press the [ , ] button to select the desired item, then press
the [ , ] button to set the desired item.
Current settings and variable settings for the desired item are displayed on the
screen.
• VOLUME
• BALANCE
• BASS
• TREBLE
• EFFECTS: You can select an item from either STANDARD,
MUSIC, MONO.
3
17
Adjust
Press the [TV MENU] button after setting is completed.
Setting TV
4
Setting SYSTEM
Press the [
] button in the INSTALL screen to select “SYSTEM” if the
Select a TV broadcasting type among EURO, E/EURO, FRANCE, and GB with
[
5
,
automatic tuning did not already select this correct system.
,
] button while the cursor points to SYSTEM.
Setting CHANNEL
Press the [
,
INSTALL
] button in the INSTALL screen
ATSS
EDIT
SYSTEM
CHANNEL
FREQUENCY
NAME
PROGRAM
STORE TO
to select “CHANNEL”.
Select a channel with the [
,
] button or
[NUMBER] button while the cursor points to
GB
EURO
C 05
175.25
03
03
Position
CHANNEL. Press the [OK] button to select
MENU Exit
Adjust
0...9 Adjust
OK Cable/Air
either Cable or Air.
6
Setting FREQUENCY
Press the [
,
INSTALL
ATSS
EDIT
SYSTEM
CHANNEL
FREQUENCY
NAME
PROGRAM
STORE TO
] button in the INSTALL screen
to select “FREQUENCY”.
While the cursor points to FREQUENCY, you
can start Manual Tuning by pressing the [
,
GB
EURO
C 05
175.25
03
03
Position
] button over 2 seconds. Also, you can start
Fine Tune
0...9 Adjust
MENU Exit
Fine Tuning step by step when you press the
button quickly.
To save adjusted values, you should save
PROGRAM with STORE TO after adjusting.
7
Setting NAME
INSTALL
* STATION NAME is mapped as broadcasting
ID. If there is no broadcasting ID, STATION
NAME is displayed as “- - - - -”.
Press the [
,
] button in the INSTALL screen
Adjust
to select “NAME”.
Enter the Modify mode by pressing the [
button while the cursor points to NAME.
Press the [
,
] button, characters are
displayed in order.
You can set a NAME consisting of 5
characters.
Press the [OK] button to save the settings.
19
ATSS
EDIT
SYSTEM
CHANNEL
FREQUENCY
NAME
PROGRAM
STORE TO
MENU Exit
,
]
Access
OK Store
Setting TV
8
Setting PROGRAM
Press the [
,
] button in the INSTALL screen
to select “PROGRAM”.
Press the [
,
] button to set the desired PR
while the cursor points to PROGRAM.
Whilst doing this channel as well as STORE TO
INSTALL
ATSS
EDIT
SYSTEM
CHANNEL
FREQUENCY
NAME
PROGRAM
STORE TO
GB
EURO
C 05
175.25
---03
03
Position
MENU Exit
Adjust
0...9 Adjust
are also changing.
9
Setting STORE TO
* This function is used to save PROGRAM
Press the [
,
] button in the INSTALL screen
to select “STORE TO”.
Press the [OK] button to store settings while the
cursor points to STORE TO, and then the
INSTALL
ATSS
EDIT
SYSTEM
CHANNEL
FREQUENCY
NAME
PROGRAM
STORE TO
GB
EURO
C 05
175.25
---03
03
Position
MENU Exit
Adjust
0...9 Adjust
OK Store
number which a program stored to will flash
red once.
20
Setting TV
Setting Other Features
1
Press the [
,
] button in the TV
FEATURES
setting screen to select “FEATURES”
LANGUAGE
GB
CHILD LOCK
ON
and press the [OK] button.
CLOCK
--:--
WAKE TIME
11:43
WAKE PR
Setting menu is displayed.
NR
09
OFF
Position
MENU Exit
2
Press the [
the [
,
,
Adjust
] button to select the desired item and press
] button to set the item.
Current settings and variable settings for the desired item are displayed in the
screen.
• LANGUAGE
• CHILD LOCK: Buttons in Setting menu are not operated (except ON/OFF
SW). Only remote controller operates and standby LED blinks.
• CLOCK
• WAKE TIME: TV is turned on automatically at the desired time.
• WAKE PR: Desired channel is turned on automatically at the desired time.
• NR(Noise Reduction)
3
Press the [TV MENU] button after setting is completed.
AUTO CLOCK SET
Normally the clock will set itself automatically if this channel set to PR01 has teletext.
However, if PR01 doesn’t have teletext the clock will have to be set manually.
NB. Remember the clock setting will be lost if the On-Off button on the front of the set
is operated. If the clock was already set, the auto clock set function doesn’t work.
21
Advantages of This Product Are.....
• DVD, VCD, CD, CD-R (MP3, JPEG), CD-RW
playback function
and CD
• Various TV aspect (DVD)
• MP3, JPEG file playback function (CD-R
disc having records of MP3, JPEG files)
4:3 for Pan and Scan, 4:3 for Letter Box, and
16:9 for Wide
• GUI (Graphical User Interface) OSD (On
Screen Display)
• Repeat playback (title and chapter for DVD,
track and disc for VCD/CD)
By using the [DISPLAY] button on the remote
control, information on the DVD/VCD/CD
player and disc, can be displayed on the TV
screen.
• Screensaver function
• Repeat a defined period from A to B
• Selective Play (DVD/VCD/CD)
You can select and play the desired title / chapter
of DVD and track of Video CD/CD in STOP
mode.
• 3D sound (3D sound effect using 2
speakers)
• Various OSD (On Screen Display) languages
function (DVD)
• High bit / high sampling with 27MHz / 10bit
video encoder
You can select and display OSD among various
languages.
This unit has 27MHz / 10bit capability, that
enables the faithful reproduction of fine
images.
• High bit / high sampling with 96KHz / 24bit
audio D/A converter
With this 96KHz / 24bit linear Pulse Code
Modulated signals, which constitute the
highest specifications in the DVD standards,
you can enjoy faithfully reproduced sound in
all of its various modes. To support 96KHz
sampling / 24bit sound, the shaping noise of
this multi-level digital sigma type of D/A
converter is kept flat up to 44KHz, thus
preventing the important audio signals from
being affected.
• Analog audio 2-channels output for
DOWNMIX (x1)
• Composite video out (x1)
• Slow Forward / Reverse (DVD) playback
• Fast Forward / Reverse playback
• Parental Lock function (DVD)
This function can prevent playback of software
that may be unsuitable for children.
• Multi Audio function (DVD)
The audio soundtrack can be heard in up to 8
languages. In the case of SVCD or CVD, it
depends on the disc. (The number of audio
languages depends on the software.)
• Multi Subtitle function (DVD)
The subtitle can be seen in up to 32 languages.
In the case of SVCD or CVD, it depends on the
disc. (The number of subtitle languages depends
on the software.)
• Multi Angle function (DVD)
This function allows you to choose the viewing
angle of scenes which were shot from a number
of different angles. (The number of angles
depends on the software.)
• Screen zoom function (DVD/VCD)
• Search of title, chapter, and time in DVD
disc, and search of track and time in VCD
22
Playing the DVD Video Disc
Basic Playback
If no button is
pressed within 5
minutes after the
opening of the tray,
it will automatically
close in order to
prevent damage
23
1
2
3
4
Press [
5
To stop, press [ ] button.
] button to power on.
Press the [OPEN/CLOSE] button to open disc tray.
Place a disc accurately within the disc tray, ensuring that the label is facing upwards.
Insert the disc and press [OPEN/CLOSE] button to close the tray.
The disc tray is closed and after checking the disc’s condition, Playback or Stop
function starts to operate.
To playback, press [PLAY] button.
• In the case of DVD,
menus and titles are displayed on the TV screen.
• In the case of S-VCD and VCD2.0
the menus are displayed on the TV screen and the unit goes into PBC ( Play
Back Control ) Mode.
• In the case of CD, VCD1.1 and MP3,
the disc plays in order of its track numbers.
For pause, press [PAUSE] button in playback mode.
If you press [PLAY] button, it starts playback again.
N
O
T
E
Various Playback Methods
• If you want fast (or fast reverse) playback,
press [
] or [
] button in Playback mode. You can watch fast (or fast
reverse) playing screen.
* This reverse playback can be unavailable for certain DVD. Unavailable for
MP3.
* The real playback speed may not coincide with displayed speed.
• If you want slow playback,
press [
] or [
] button in PAUSE mode. You can watch the desired
screen in the slow forward or slow backward playback.
* The real playback speed may not coincide with displayed speed.
• If you want still picture,
press [PAUSE] button in Playback mode.
You can watch the desired screen in Pause status.
Playing a desired scene
To skip scenes in a disc
1
2
To move to next chapter (or track), press [NEXT
] button.
The current chapter (or track) moves to the next chapter (or track).
Press [PREV
] button.
The current scene moves to the previous chapter (or track) or first scene of current
chapter (or track).
Directly moving to a desired title
Some movie discs may contain multiple titles. If the disc has a movie title menu recorded on
it, the [TITLE] button can be used to select the movie title. Details of operation may differ
depending on the disc used.
Selecting a title may not be available on certain DVD discs.
1
Press the [TITLE/PBC] or [DVD/MENU]
2
Press the [ENTER] button or
button.
A list of the titles on the disc is displayed.
For the case of VCD disc, menu screen will
appear only when the disc has PBC function
and PBC ON is activated.
[PLAY/PAUSE] button after pressing
the [
,
,
,
] button to select the
desired title.
The selected title now starts playing.
24
Playing a desired scene
Playing a Programmed order
1
While STOP or Playback, press
PROGRAM
[PROGRAM] button.
While the right figure is appearing, please input
desired Title(T) and Chapter(C) number with
NUMBER buttons.
* In case of VCD and CD, please input TRACK Number.
2
TITLE CHAP.
SEL.
00
000
1-54
TITLE CHAP.
TITLE CHAP.
01 - - - - 06 - --02 - - - - 07 - --03 - - - - 08 - --04 - - - - 09 - --05 - - - - 10 - --PRG PLAY : PLAY SELECT : ENTER EXIT : PRG
After completing setting, press [PROGRAM] or [PLAY] button.
Then, titles and chapters (track) are played in the above-programmed order.
* To exit from program mode, press [
] or [OPEN/CLOSE] button.
To cancel, move the cursor to the
desired parts and press [CLEAR] button.
Repeating a defined period
1
25
•
•
•
•
•
•
•
Each time you press [REPEAT} button in playback mode, repeat
playback starts as below.
- DVD -
- VCD -
- CD -
- MP3 -
CHAPTER
TRACK
TRACK
TRACK
TITLE
DISC
DISC
FOLDER
OFF
OFF
RANDOM
RANDOM
OFF
OFF
CHAPTER : Current chapter will repeatedly playback.
TITLE : Current title will repeatedly playback.
TRACK : Current track will repeatedly playback.
DISC : Current disc will repeatedly playback.
RANDOM : Tracks in the disc will playback in random order.
FOLDER : Current folder will repeatedly playback.
OFF : Repeat playback will be cancelled.
Playing a desired scene
Repeating a defined period from A to B
You may repeat a defined period from A to B
1
2
3
At the point where you want to start the repeat
playback, press [A - B] button.
A-
The right figure appears and repeat playback start position
(A) is set.
At the point where you want to end the repeat
playback, press [A - B] button again.
A-B
The repeat playback end position (B) is set and a defined
period from A to B is playback repeatedly.
To exit from repeat playback mode, press [A - B]
button.
OFF
It enters into Normal playback mode.
Searching DVD with a title number, a chapter number or a time
1
2
3
4
If you want to search for a title number,press
[SEARCH] button one time.
It shows current and total title numbers. Please enter the
new title number to be searched using the [NUMBER]
buttons.
Current title
T
total title
If you want to search for a chapter number,
press [SEARCH] button twice.
It shows current and total chapter numbers. Please enter
the new chapter number to be searched using the
[NUMBER] buttons.
If you want to search for a particular time,
press [SEARCH] button three times.
Please enter the new time to be searched using the
[NUMBER] buttons.
001/003
Current chapter
C
001/023
total chapter
01:03:20
total time
In order to complete the search process, press
[ENTER] button.
PLAY starts from the selected position.
26
Playing a desired scene
Searching VCD, CD and MP3 with a track or track time
1
If you want to search for a particular track,
press [SEARCH] button once.
T
In the case of PBC OFF, a screen as shown to the right
will appear showing the current and total track
numbers. Please enter the required track number using
the number buttons on the remote control.
* If PBC is on, entering the track number will default the unit’s
PBC to off.
2
If you want to search for a particular track
time, press [SEARCH] button twice.
3
27
In the case of PBC OFF, a screen as shown to the right
will appear showing the total time: please enter the
required time using the number buttons on the unit’s
remote control.
On completion of either search process,
please press [ENTER].
PLAY starts from the selected position.
Current track
001/013
total tack
01:03:20
total time
Confirming the current PLAY mode on screen
Confirming the current DVD disc mode
1
During play, press [DISPLAY] button.
This will display the current disc mode.
If you want to change any of the modes displayed, select the item using the
up/ down cursors and choose the new setting using either the [ ] or [ ]
button or the numeric buttons on the remote control. On completion, press
[ENTER] button.
Exit from this Display mode by pressing the [DISPLAY] button.
DISPLAY
T
C
001/003
001/023
00:01:03
1/3 ENG
1/3 ENG
OFF
1/4
current title / total title number
current chapter / total chapter number
time elapsed
current subtitle / total subtitle number / subtitle selected
current audio language / total audio language number / audio language selected
repeat playback mode
current angle / total angle number
Confirming the current SVCD disc mode
1
During play, press [DISPLAY] button.
This will display the current disc mode.
If you want to change any of the modes displayed, select the item using the up/ down
cursors and choose the new setting using either the [
] or [
] button or the numeric
buttons on the remote control. On completion, press [ENTER] button.
Exit from this Display mode by pressing the [DISPLAY] button.
DISPLAY
T
C
001/003
00:10:54
OFF
OFF
1/3
current track / total track number
time elapsed
repeat playback mode
PBC mode
current audio language / total audio language number
28
Confirming the current PLAY mode on screen
Confirming the current VCD disc mode
1
During play, press [DISPLAY] button.
This will display the current disc mode.
If you want to change any of the modes displayed, select the item using the up/
down cursors and choose the new setting using either the [
] or [
] button or
the numeric buttons on the remote control. On completion, press [ENTER] button.
Exit from this Display mode by pressing the [DISPLAY] button
DISPLAY
T
C
001/005
00:07:13
OFF
OFF
current track / total track number
time elapsed
repeat playback mode
PBC mode
Confirming the current CD, MP3, JPEG disc mode
1
During play, press [DISPLAY] button.
This will display the current disc mode.
If you want to change any of the modes displayed, select the item using the
up/ down cursors and choose the new setting using either the [ ] or [ ]
button or the numeric buttons on the remote control. On completion, press
[ENTER] button.
Exit from this Display mode by pressing the [DISPLAY] button
DISPLAY
T
C
29
001/005
00:07:13
OFF
current track / total track number
time elapsed
repeat playback mode
AUDIO language, SUBTITLE language and 3D AUDIO
The user may select the audio track or the subtitle language if the disc supports this multi-language function.
Selecting an audio language
1
Keep pressing [
] button until the user’s preferred
language appears in playback mode.
If that particular DVD disc includes this audio information, the user can press
[
] button to scroll through the available languages.
current audio language
A certain disc may
total audio language
audio language selected
01/03 ENG
AUDIO : DOLBYD
not support audio select.
current audio type
Selecting a subtitle language
1
Keep pressing the [
] button until the user’s preferred
subtitle language appears in the playback mode.
If that particular DVD disc includes this subtitle information, each time the
user presses the [
] button the available subtitles will appear in rotation,
OFF will also be an option in this rotation.
current subtitle language
A certain disc may
subtitle language selected
not support subtitle
01/03 ENG
select.
total subtitle language
Selecting 3D Audio
Sound Fields can be set.
1
If you want to adjust Sound Fields, press [3D] button.
Every time the user presses [3D] button, a 3D sound changes 3D ON --->
3D OFF ---> 3D ON .... in rotation.
3D ON
3D OFF
30
ZOOM and Multi Angle
Using a zoom function
The user can enlarge the current screen by either 2 or 4 times.
1
Keep pressing [ZOOM] button until the preferred zoom
appears.
Every time the user presses [ZOOM] button, the magnification changes : 2
times (X2) ---> 4 times (X4) ---> OFF ---> 2 times (X2) ---> ... in rotation.
The center of the screen is taken as the base point for the enlargement. It is
impossible to change this point using the [ , , , ] button on the remote
control.
• For the case of SVCD
X2 _ _ _ _ _
_
_
_
_
_
and VCD, only 2 times
Zoom is available.
• During 4 times zoom,
X4 _ _ _ _ _
_
_
_
_
_
the subtitle facility is
not available.
Multi Angle
If a disc includes multi angle information, the user can watch a screen using a variety of angles. The function is
limited to a DVD disc supporting multi angle information.
1
Keep pressing [
] button until the preferred angle
appears.
Every time the user presses [
consecutive order.
] button, the angle changes in a
current screen angle
01/03
total screen
angle
31
About MP3 and JPEG discs
Playing a disc containing MP3, JPEG files
This unit will play MP3, JPEG files recorded on CD-R and CD-RW discs.
1
Turn on your television and select the channel assigned to this
DVD player.
Press the DVD [OPEN/CLOSE] button, to open the disc tray.
Place the disc containing MPS, JPEG files on the disc tray with the label facing upwards.
Press the DVD open [OPEN/CLOSE] button, to close the disc tray.
The unit will take a short time to load the disc and display the directory structure.
2
The figure such as
that displayed on the
right should appear.
D I S C:
Name of current directory
..
Location of current cursor
D I R- - 01
D I R- - 02
D I R- - 03
FILTER
REPEAT
00:00 / 00:00
MP3 ONLY
TRACK
Current disc type selected
Current repeat mode
selected
ENTER MENU
3
4
5
Select your disc type.
Move the cursor to FILTER by pressing [ ,
, , ] button. Keep pressing
[ENTER] button until the user’s preferred disc
type. Each time the user presses [ENTER]
button, disc type changes MIXED ---> MP3
ONLY ---> JPG ONLY ---> MP3 AND JPG --->
MIXED ---> ... in rotation.
Select the repeat playback mode.
Move the cursor to REPEAT by pressing [
, , , ] button. Keep pressing
[ENTER] button until the user’s preferred
repeat playback mode becomes available.
Each time the user presses [ENTER] button, the
repeat playback mode changes TRACK --->
FOLDER ---> RANDOM OFF ---> ... in
rotation.
Select the folder.
Move the cursor to desired folder by pressing
[ , , , ] button and press [ENTER]
button to confirm.
DISC:
..
DIR--01
DIR--02
DIR--03
FILTER
REPEAT
00:00 / 00:00
MP3 ONLY
TRACK
ENTER MENU
DISC:
..
DIR--01
DIR--02
DIR--03
FILTER
REPEAT
00:00 / 00:00
MP3 ONLY
TRACK
ENTER MENU
DISC :
..
DIR --0 1
DIR --0 2
DIR --0 3
FILTER
REPEAT
00:00 / 00:00
MP3 ONLY
TRACK
ENTER MENU
32
Confirming the current PLAY mode on screen
6
Select the file to listen to (or view).
Move the cursor to the desired file which you want
to listen to (or view) by pressing [ , , , ]
button and press [ENTER] button to confirm. The
selected filed will play back.
* To exit the directory screen press [MENU] button
in playback or stop mode. Press [MENU] button to
make it reappear.
D I SC: \ D I R- - 0 1
..
F I LEOP EN - - 0 1
F I LEOP EN - - 0 2
F I LEOP EN - - 0 3
FILTER
REPEAT
00:00 / 00:00
MP3 ONLY
TRACK
ENTER MENU
Play and Pause
Press the [PLAY/PAUSE] button toggle between those functions.
Search for a track
The [SEARCH] button works on MP3/JPEG discs as well as VCD/CD audio.
* If the [SEARCH] button is pressed in playback mode the folder tree view will disappear to be replaced by the
search bar.
To stop playback
Press the [STOP
] button.
To skip to the next or previous file
• Press the [NEXT
] button of the remote control briefly while playing, to skip ahead to the beginning of the
next file. Each time you press the button consecutively, the beginning of the next file is located and played back.
• Press the [
PREV (Previous)] button of the remote control briefly while playing, to skip back to the beginning of
the previous file. Each time you press the button consecutively, the beginning of the previous file is located and
played back.
33
The ability of this unit to read MP3 discs is dependent on the following:
• The Bit Rate must in the range of 64-256 kpbs.
• The maximum number of directories should not exceed 32.
• The maximum depth level of directories should not exceed 4.
• In case of the file that is recorded with the variable bit rate (VBR) in one file (Example : 54~256kbps) occurrence of the sound
breaking may happen during the playback.
• File names should be named using 8 or fewer letters and/or numbers, and must incorporate the “MP3” file extension.
EXAMPLE: ******** . MP3 where each * is a letter or number.
• Use only letters and/ or numbers in file names. If you use special characters, the file and/ or folder names may not be
displayed correctly on the on-screen display.
The ability of this unit to read JPEG discs is dependent on the following:
• If you press [PLAY] button instead of [ENTER] in JPEG image, slide show will begin at the current image.
• To stop slide show, press [STOP] button. By pressing [STOP] and [PLAY] button, you can start slide show from the first JPEG
image.
Cautions
• Don’t use the CD-RW (Rewritable) disc if possible because it can not be played back.
• The CD-R must be recorded with the standard format because it can not be played back according to the recording format.
• The CD-R should be written using the ‘disc at once’ method.
• The disc which is made using the IS0 9660 format can be Played back.
Displaying menus in a disc
To display menus in a disc
If a disc includes menus, the user may use them.
1
2
Press [TITLE/PBC] or [DVD/MENU] button.
• This will show the available menus held on the disc, which will differ between formats.
(“Return” will appear on the OSD with VCD2.0)
• If it is a VCD2.0, select PBC ON mode by pressing [TITLE/PBC] button.
* CD and VCD1.1 do not support the function.
Move the cursor to the particular item by using the [
,
,
,
] buttons on the
remote control, selecting one using either [ENTER] or [PLAY] button.
34
Language setup
The user can set the language of menus in a disc, audio and subtitle.
1
Press [SETUP] button when the DVD player
is either in the STOP or the Resume STOP
mode.
LANGUAGE
OSD LANGUAGE
AUDIO
SUBTITLE
DISC MENU
MOVE :
If a disc does not
include this language
setting information, this
function will not be
2
Selecting a OSD LANGUAGE.
3
Selecting AUDIO LANGUAGE.
4
Selecting SUBTITLE LANGUAGE.
5
Selecting DISC MENU LANGUAGE.
available.
35
VIDEO
AUDIO
OTHERS
ENGLISH
ENGLISH
ENGLISH
ENGLISH
SELECT:ENTER EXIT:SETUP
Please select a language to be displayed on the
DVD screen.
Each time the user presses [ENTER] button, the
available OSD LANGUAGE changes in rotation.
The preferred audio language maybe set if the audio language is set and
recorded in the DISC.
Every time the user presses [ENTER] button, the available AUDIO changes in
rotation.
The preferred language for the subtitles may be set within this menu.
When a subtitle language is set and recorded in the DISC, it is automatically
played in the set language every time it is played.
Every time the user presses [ENTER] button, the SUBTITLE language options
are scrolled through changes in rotation.
Please set it as the preferred DISC MENU language. In case the DISC MENU
language is set and recorded in the DISC, it is automatically played in the set
language every it is playing. For example, English is set and recorded as a
DISC MENU language in the DISC, it is played in English.
Every time the user presses [ENTER] button, the DISC MENU language will
change, rotating through the various options.
Video setup
A user can set up a connected TV condition and screen.
1
Press [SETUP] button when the DVD
LANGUAGE
player is either in the STOP or the
TV ASPECT
AUDIO
OTHERS
4:3 PS
Resume STOP mode.
MOVE :
2
VIDEO
SELECT:ENTER EXIT:SETUP
Selecting TV ASPECT.
Every time the user presses [ENTER] button, TV ASPECT changes 4:3 LB ---> 16:9 WIDE
---> 4:3 PS ---> ... in rotation. If a user selects “4:3”, the user can watch the original
scene in “16:9”, but with black bars at the top and bottom of the screen. If a user
selects “4:3 PS”, the user can only watch a selection of the original “16:9” screen. If
the disc’s TV aspect is originally recorded in 4:3, the user will not be able to watch it in
a widescreen format even though the “16:9 WIDE” option has been selected.
Audio setup
A user may select audio menu according to a user’s speaker set.
1
2
Press [SETUP] button when the DVD player
is either in the STOP or the Resume STOP
mode.
Selecting DIGITAL OUT.
LANGUAGE
VIDEO
DIGITAL OUT
DYNAMIC RANGE
MOVE :
AUDIO
OTHERS
BITSTREAM
OFF
SELECT:ENTER EXIT:SETUP
Every time the user presses [ENTER] button,
DIGITAL OUT changes BITSTREAM ---> LPCM ---> BITSTREAM ---> ... in
rotation. Set output conditions to coaxial or optical terminal. You can set
following two values of digital output;
• BITSTREAM : the same format as that recorded on the DVD.
• LPCM : the decoded audio signal.
This option(Digital out) is not available for DDT-14H9ZZF
3
Selecting DYNAMIC RANGE.
Every time the user presses [ENTER] button, DYNAMIC RANGE changes
OFF ---> FULL ---> OFF ---> ... in rotation.
• Set “OFF” to hear a program in the full dynamic range as recorded disc.
• If you hear loud sound softer and soft sound louder, set “FULL”.
(In order to compress the dynamic range of the soundtrack set to FULL.)
36
Others Setup
• If password is wrong,
“WRONG
PASSWORD” appears
instead of “CHANGE
PASSWORD”.
• The default password
is “3308” : you may
enter this password if
your chosen one has
been lost or forgotten.
1
2
3
4
Press [SETUP] button when the DVD
5
Selecting PARENTAL.
Resume STOP mode.
LANGUAGE
VIDEO
OSD
SCREEN SAVER
DEFAULTS
PARENTAL
AUDIO
OTHERS
ON
ON
RESET
8 ADULT
Selecting OSD.
Select “ON” to allow OSD (On Screen
Display) to be displayed on the TV.
MOVE :
SELECT:ENTER EXIT:SETUP
Selecting SCREEN SAVER.
If bright scenes continue to be displayed on the screen, the TV can become
damaged. If the screensaver option is set to “ON”, the screensaver functions
automatically and the DVD logo will move continuously if the Resume stop,
Stop or Open status is maintained for more than 5 minutes.
Changing DEFAULTS.
If you press [ENTER] button, “RESET” changes to “LOADING” for 2 seconds.
Then it changes again to “RESET”.
This operation will reset every function to the original factory defaults, with
the exception of the Parental settings.
Press [ENTER] button when the cursor is located in
PARENTAL.
When “INPUT PASSWORD” appears on the screen,
input the password.
Change the level of Parental Control.
With right password, you can change the PARENTAL
by pressing [ENTER] button. Every time the user
presses [ENTER] button, Parental changes 1KIDS 2G
3PG 4PG-13 5PG-R 6R 7NC-17 8ADULT in rotation.
These 8 levels of parental control are provided to
prevent children from viewing scenes of a violent or
sexual nature. The level of parental control can be
incremented to a suitable level.
6
37
player is either in the STOP or the
LANGUAGE
VIDEO
AUDIO
OTHERS
OSD
ON
SCREEN SAVER ON
DEFAULTS
RESET
CHANGE PASSWORD _ _ _ _
MOVE :
LANGUAGE
SELECT:ENTER EXIT:SETUP
VIDEO
OSD
SCREEN SAVER
DEFAULTS
PARENTAL
AUDIO
OTHERS
ON
ON
RESET
8 ADULT
CHANGE PASSWORD _ _ _ _
MOVE :
SELECT:ENTER EXIT:SETUP
Changing a password.
To change the user’s password, please move cursor to “CHANGE PASSWORD” and
enter new password.
About DVD
Terms related with DVD
DVD
A DVD (abbreviation of Digital Versatile Disc or Digital Video Disc) can include 135
minutes of video information. And for audio, it can hold up to 8 kinds of languages and 32
kinds of subtitle languages. By using MPEG-2 video compression and digital 3D surround
sound, DVD realizes high definition images and quality sound similar to that found in a
movie theatre.
CDDA
A CDDA (abbreviation of Compact disc digital audio) is a music disc that is currently used.
MP3
Audio compression format that enables audio files to be stored and transferred on a
computer with a relatively small file size. It enables you to enjoy CD quality music. (Short for
MPEG-1 Layer 3)
PBC
This is recorded on a Video CD 2.0, Video CD 3.0, SVCD and CVD. The scenes or
information to be viewed (or listened to) can be selected interactively with the TV monitor by
looking at the menu shown on the TV monitor. It stands for PlayBack Control.
CHAPTER
This relates to the information recorded onto a DVD. A title in a DVD may be divided into
many tracks and these tracks are called chapter. A certain scene contained on the disc can
be quickly searched with this chapter number.
TITLE
This relates to the information recorded onto a DVD. A DVD can be divided into many titles.
TRACK
This relates to the information recorded onto a video CD and audio CD. A disc may consist
of many tracks which will allow a user to search to a certain position.
dts
Digital Theatre System is a 5.1 -channel surround sound system, which is widely used in
movie theatres around the world. It enables the bit rate to be increased to provide good
sound quality. “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
Multi Angle
Some DVD discs contain the various scenes that have been simultaneously shot from a
number of different angles.
PCM
PCM (Pulse Code Modulation) means digital sound.
Dolby Digital Dolby Digital enables the delivery of mono through 5.1-channel audio at data rates from 32
kbps to 640 kbps, thus offering flexibility and economical performance as well as
uncompromised sound quality.
Bitstream
Digital audio data that is decoded into an analogue signal for subsequent output to
speakers.
Lt/Rt
It indicates L/R of Dolby Digital 2CH Downmix Output.
Downmix
Downmix is the technology for playing proper audio in case the recorded audio channel
construction and that of output channel does not match each other. Downmix will provide
5.1 channel-audio by using 2 stereo speakers.
39
About DVD
Discs
The safe keeping of discs
• To keep a disc in clean condition, please do not touch the side containing play information.
• Do not attach a bit of paper or sticky tape on it.
• Do not expose a disc to a direct sunlight or electric
heating systems.
• After using it, please keep the disc in a case.
Cleaning a disc
• Please rub gently, from the center outwards, with clean cloth.
• Do not use thinner, benzol (benzene), commercial cleaning goods
or antistatic sprays.
Region Code
This product and all DVD’s have
region codes allocated to them. If
both codes do not match the disc can
not be played. A map showing the
codes allocated to each region, is
given to the side.
Macrovision
This product incorporates copyright protection technology that is protected by method claims of certain U.S
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
40
Before suspecting fauls with the DVD
Symptom
41
Checks
• The recorder does not play.
If a DVD is from overseas, it may not be played. Please check a
DVD’s region code whether it has the relative region 2 or All.
Please check whether a DVD is inserted in a right directing.
This unit does not support CD-ROM or DVD-ROM playback.
• No sound comes through.
Play mode may be “SLOW” or “PAUSE/STEP”(In abnormal
speed play, no sound comes through)
Did you connect the parts in right way?
Please check the operative condition of TV or amplifier.
From “DEFAULT” SET, please check “Audio” items.
• A disc is playing but screen does
not appear or poor screen appears.
Did you turn on your TV sets?
Did you connect the parts in right way?
The play may be in “PAUSE”.
The disc may be contaminated or damaged.
• The DVD Sound is irregular
Please check the connection with Dolby Digital amplifier.
Please check the plugs are connected with one another tightly.
The connection terminals may be contaminated.
• “AUDIO” or “SUBTITLE” button does
not work.
If a DVD does not include language information, it does not
support the function.
• “ANGLE” button does not work
while a DVD is playing.
”ANGLE” is supported only in a DVD contains multi angle
scenes. Also a user can confirm the support with the “ANGLE”
mark on screen.
• “MENU” does not appear while a
DVD is playing.
Please check the degree of remote control, distance or any
interruption.
Please check a battery in remote control whether it is exhausted
or not.
A DVD may not contain menu information.
• Screen shakes or appears only in
black and white. (or Subtitle
shakes)
The recorder may not coincide with your TV system. Please
press [SYSTEM] to match to PAL system.
A disc may have some contaminants or be damaged.
Please check a DVD’s region code 5.
To watch the disc whose region code is ALL and its system is
NTSC, select “PAL” in TV Type.
• The file name of MP3 (CD-R)
appears with strange letters.
The file name of MP3 recognize only the Alphabet (A-Z, a~z),
numbers (0-9) and a special symbol on keyboard (~, !, @, #, $
...) and 10 letters can be displayed in maximum.
The letters except above case will be displayed like “- - - - ”.
• Any MP3 (CD-R) file isn’t displayed.
If the surface of disk is injured, the file display and playback
may be impossible.
Before Calling Service Personnel
Symptoms
Correction
• Colour is not displayed and net
pattern is displayed on the specific
channel.
Check the external antenna and cable TV conditions.
Check whether you select the correct channel.
• Vertical and horizontal line and net
pattern are displayed on the
screen in a moment.
Vibration is also displayed.
Check the interference wave caused by car, neon sign, and
high frequency.
Check the strong interference radio wave from wave of
other devices or radio station. Please stop the use of mobile
phone, hair dryer, and electric drill.
• Pictures are overlapped and white
and black spots are displayed
Check damage of antenna or connection of antenna cable.
Check the height and direction of antenna. If it is incorrect,
please adjust the antenna.
• The original colours are not displayed
in a screen in specific areas.
Remove from magnetic fields or rotate set until purity error
disappears.
• Picture is displayed irregularly.
Check the connection of antenna cable (incorrect connection
or disconnection).
Move this product to another location.
• No picture and sound
Plug the power cord into the wall outlet securely.
Press the [TV/AV/DVD] button to change input mode.
• No sound
[
] button may be pressed.
Check the volume.
• The remote control does not work
properly
Check a stoppage of power supply
Check whether the power cord is plugged into the wall
outlet.
The batteries in remote control may be exhausted or loaded
in wrong polarity.
Check whether the remote control is too far from the player
and is not pointed at the remote sensor of the player.
• The playback picture is poor
Check the contamination of a disc and clean the disc.
• The DVD player does not start
playback
Insert a disc.
Insert a playable disc. Check the disc type, colour system
and Region code.
Place the disc with the playback side down.
Place the disc on the disc tray correctly inside the guide.
Check the contamination of a disc and clean the disc.
Press the [DVD MENU] button to turn off the menu screen.
Cancel the Rating function or change the rating level.
42
Specifications
Model
Input band
and system
DTD-14H9
VHF-L
E2~S7/E2~S8(EXCEPT UK)
VHF-H
S8~S36/S9~S38(EXCEPT UK)
UHF
S37~E69/S39~E69
UK MODEL : PAL-I/II
TV-STANDARD
CONTINENTAL : PAL, SECAM-BG/DK
FRANCE MODEL : PAL, SECAM-BG/DK SECAM-L/L
SPEAKER RMS OUTPUT
1.5W + 1.5W (FM 60% Mod.)
(60% mod.)
POWER SUPPLY
POWER CONSUMPTION
66W
ST-BY POWER
under about 3W
UNIT SIZE(W x H x D):
388 x 374 x 381
CARTON SIZE(W x H x D):
446 x 467 x 458
GROSS WEIGHT (KG):
AUDIO OUTPUT
INPUT
OUTPUT
43
220 ~ 240VAC 50Hz
11.6kg
L/R
AV : 21 PIN SCART (FULL SCART)
21 PIN SCART(FULL SCART) HEADPHONE
Download PDF

advertising