Skorpio™/Skorpio-GUNTM
www.mobile.datalogic.com
World wide Sales Network
available from: www.mobile.datalogic.com/contacts
Datalogic Mobile S.r.l.
Via S. Vitalino, 13
40012 Lippo di Calderara di Reno
Bologna - Italy
Telephone: (+39) 051-3147011
Fax: (+39) 051-3147561
User’s Manual
©2008 Datalogic Mobile S.r.l.
822000685 (Rev. F)
01/08
Datalogic Mobile S.r.l.
Via S. Vitalino 13
40012 - Lippo di Calderara di Reno
Bologna - Italy
Datalogic Skorpio™ and Skorpio-GUN™ - User's Manual
Software Version: 3.00
Ed.: 07/2008
ALL RIGHTS RESERVED
Datalogic is a registered trademark of Datalogic S.p.A. in many countries and the Datalogic logo is a
trademark of Datalogic S.p.A.. All other brand and product names mentioned herein are for identification
purposes only and may be trademarks or registered trademarks of their respective owners.
Datalogic reserves the right to make modifications and improvements without prior notification.
Datalogic shall not be liable for technical or editorial errors or omissions contained herein, nor for incidental or
consequential damages resulting from the use of this material.
© Datalogic Mobile S.r.l. 2006-2008
CONTENTS
DATALOGIC END USER LICENSE AGREEMENT..................................... v
REFERENCES ........................................................................................... vii
Conventions .................................................................................................vii
Reference Documentation ...........................................................................vii
Services and Support...................................................................................vii
SAFETY REGULATIONS.......................................................................... viii
General Safety Rules.................................................................................. viii
Bluetooth® Approval .................................................................................... viii
Power Supply.............................................................................................. viii
Laser Safety..................................................................................................ix
LED Class ................................................................................................... xiii
Radio Compliance....................................................................................... xiii
FCC Compliance..........................................................................................xv
SAR Compliance..........................................................................................xv
Patents.........................................................................................................xv
WEEE Compliance .....................................................................................xvi
GENERAL VIEW ..................................................................................... xviii
1
1.1
1.1.1
1.1.2
1.2
1.3
1.4
1.5
1.6
1.7
1.8
INTRODUCTION .......................................................................................... 1
Datalogic Skorpio™ Description ................................................................... 1
Datalogic Skorpio™ ...................................................................................... 1
Datalogic Skorpio-GUN™ ............................................................................. 2
Available Models........................................................................................... 3
Package Contents......................................................................................... 3
Inserting Mini SD card................................................................................... 5
Using the Belt Clip ........................................................................................ 7
Stylus Holder................................................................................................. 9
Attaching the Wrist Strap .............................................................................. 9
Accessories................................................................................................. 10
2
2.1
2.2
2.3
2.4
2.5
2.6
2.7
CONNECTIONS ......................................................................................... 11
USB Connection ......................................................................................... 11
Connection to USB peripherals................................................................... 12
RS232 Connection...................................................................................... 13
Modem Connection..................................................................................... 14
Ethernet Connection ................................................................................... 14
WLAN Connection ...................................................................................... 15
WPAN Connections .................................................................................... 17
iii
3
3.1
3.2
3.3
3.3.1
3.4
3.4.1
3.5
3.5.1
3.5.2
3.6
3.6.1
3.6.2
3.7
3.7.1
3.7.2
3.7.3
3.7.4
3.7.5
3.7.6
3.8
3.8.1
3.8.2
3.8.3
3.8.4
3.9
3.10
USE AND FUNCTIONING .......................................................................... 18
Startup ........................................................................................................ 18
Using the Stylus .......................................................................................... 20
Data Capture............................................................................................... 21
Laser Data Capture..................................................................................... 21
Description of the Keys ............................................................................... 22
Resetting the Skorpio.................................................................................. 25
Status Indicators ......................................................................................... 27
LED Status.................................................................................................. 27
Taskbar ....................................................................................................... 28
Data Capture Configuration ........................................................................ 29
Configure .................................................................................................... 29
Capture ....................................................................................................... 34
Control Panel .............................................................................................. 35
Buttons........................................................................................................ 35
Registry....................................................................................................... 36
Files Admin ................................................................................................. 37
Wireless Communications........................................................................... 39
Ethernet Settings ........................................................................................ 40
Stylus Calibration ........................................................................................ 42
Windows Connections ................................................................................ 44
Microsoft® ActiveSync® ............................................................................... 44
Uploading/Downloading Files through an RS232 Connection..................... 46
Bluetooth® Manager Device Setup.............................................................. 48
FTP Server Setup ....................................................................................... 51
Backup Directory File Management ............................................................ 53
Firmware Update ........................................................................................ 54
4
4.1
4.2
4.2.1
4.2.2
4.3
4.4
MAINTENANCE ......................................................................................... 57
Charging the Battery Pack .......................................................................... 57
Replacing the Battery Pack......................................................................... 59
Datalogic Skorpio™ Models........................................................................ 59
Datalogic Skorpio-GUN™ Models............................................................... 60
Compact Flash and Secure Storage Cards................................................. 64
Cleaning the Mobile Computer.................................................................... 64
5
5.1
5.2
TECHNICAL FEATURES ........................................................................... 65
Technical Data ............................................................................................ 65
Reading Diagrams ...................................................................................... 67
6
TEST CODES ............................................................................................. 69
GLOSSARY................................................................................................ 72
INDEX ......................................................................................................... 74
iv
DATALOGIC END USER LICENSE AGREEMENT
BY DOWNLOADING OR INSTALLING THE SOFTWARE, OR BY USING DATALOGIC EQUIPMENT THAT
INCLUDES THIS SOFTWARE, YOU ARE CONSENTING TO BE BOUND BY THIS AGREEMENT. IF YOU
DO NOT AGREE TO ALL OF THE TERMS OF THIS AGREEMENT, THEN DO NOT DOWNLOAD, INSTALL,
USE THE SOFTWARE NOR DATALOGIC EQUIPMENT.
The following terms and conditions govern your use of the Software except to the extent that a particular program (a) is the
subject of a separate written agreement with Datalogic or (b) includes a separate “click-on” license agreement as part of the
installation and/or download process. Should a conflict arise between the provisions of the foregoing documents, the order of
precedence shall be (1) the written agreement, (2) the click-on agreement, and (3) this agreement (“Agreement”).
1. License. Subject to the terms and conditions of and except as otherwise provided in this Agreement, Datalogic Mobile S.r.l.
(“Datalogic”) and its suppliers grant to Customer (“Customer”) a nonexclusive and nontransferable license to use the specific
program modules, feature set(s) or feature(s) in object code form only as well as associated media, printed materials and
“online” or electronic documentation (the “Software”) for which Customer has paid, if required, the license fees. The Software is
licensed not sold. The license shall be subject to each of the following limitations:
•
Unless otherwise expressly provided in the documentation, Customer shall use the Software solely as embedded in, for
execution on, or (where the applicable documentation permits installation on non-Datalogic equipment) for
communication with Datalogic equipment owned or leased by Customer;
•
Customer’s use of the Software shall be limited to use on a single hardware chassis, on a single central processing unit,
as applicable, or use on such greater number of chassis or central processing units as Customer may have paid
Datalogic the required license fee; and
•
Customer’s use of the Software shall also be limited, as applicable and set forth in Customer’s purchase order or in
Datalogic’s product catalog, user documentation, or web site, to a maximum number of (a) seats (i.e. users with access
to the installed Software), (b) concurrent users, sessions, ports, and/or issued and outstanding IP addresses, and/or (c)
central processing unit cycles or instructions per second. Customer’s use of the Software shall also be limited by any
other restrictions set forth in Customer’s purchase order or in Datalogic’s product catalog, user documentation or web site
for the Software.
2. General Limitations. Except as otherwise expressly provided under this Agreement, Customer shall have no right, and
Customer specifically agrees not to (i) transfer, assign or sublicense its license rights to any other person, or use the Software
on unauthorized or secondhand Datalogic equipment, and any such attempted transfer, assignment or sublicense shall be void;
(ii) correct errors to or otherwise modify or adapt the Software or create derivative works based upon the Software, or to permit
third parties to do the same; or (iii) decompile, decrypt, reverse engineer, disassemble or otherwise reduce the Software to
human-readable form to gain access to trade secrets or confidential information in the Software. To the extent required by law,
at Customer's request, Datalogic shall provide Customer with the interface information needed to achieve interoperability
between the Software and another independently created program, upon payment of Datalogic's applicable fee. Customer shall
observe strict obligations of confidentiality with respect to such information.
3. Upgrades and Additional Copies. For purposes of this Agreement, “Software” shall include (and the terms and conditions of
this Agreement shall apply to) any upgrades, updates, bug fixes or modified versions (collectively, “Upgrades”) or backup copies
of the Software licensed or provided to Customer by Datalogic or an authorized distributor for which Customer has paid the
applicable license fees. Notwithstanding any other provision of this Agreement: (1) customer has no license or right to use any
such additional copies or upgrades unless customer, at the time of acquiring such copy or upgrade, already holds a valid license
to the original Software and has paid the applicable fee for the upgrade, if required; (2) use of upgrades is limited to Datalogic
equipment for which customer is the original end user, purchaser or lessee or who otherwise holds a valid license to use the
Software which is being upgraded; and (3) use of additional copies is limited to backup purposes only.
4. Proprietary Notices. Customer agrees to maintain and reproduce all copyright and other proprietary notices on all copies, in
any form, of the Software in the same form and manner that such copyright and other proprietary notices are included on the
Software. Except as expressly authorized in this Agreement, Customer shall not make any copies or duplicates or any Software
without the prior written permission of Datalogic. Customer may make such backup copies of the Software as may be necessary
for Customer’s lawful use, provided Customer affixes to such copies all copyright, confidentiality, and proprietary notices that
appear on the original.
5. Protection of Information. Customer agrees that aspects of the Software and associated documentation, including the
specific design and structure of individual programs, constitute trade secrets and/or copyrighted material of Datalogic. Customer
shall not disclose, provide, or otherwise make available such trade secrets or copyrighted material in any form to any third party
without the prior written consent of Datalogic. Customer shall implement reasonable security measures to protect such trade
secrets and copyrighted material. Software and documentation shall remain solely property of Datalogic.
v
6. Limited Warranty. If Customer obtained the Software directly from Datalogic, then Datalogic warrants that during the
Warranty Period (as defined below): (i) the media on which the Software is furnished will be free of defects in materials and
workmanship under normal use; and (ii) the Software will substantially conform to its published specifications. The “Warranty
Period” means a period beginning on the date of Customer’s receipt of the Software and ending on the later of (a) ninety (90)
days from the date of initial shipment of the Software by Datalogic, or (b) the end of the minimum period required by the law of
the applicable jurisdiction. The limited warranties extend only to Customer as the original licensee. Customer's sole and
exclusive remedy and the entire liability of Datalogic and its suppliers under these limited warranties will be, at Datalogic’s sole
option, repair or replacement of the Software if reported (or, upon request, returned) to Datalogic. Except as expressly granted
in this Agreement, the Software is provided AS IS and with all faults. Datalogic does not warrant that the Software is error free
or that Customer will be able to operate the Software without problems or interruptions. In addition, due to the continual
development of new techniques for intruding upon and attacking networks, Datalogic does not warrant that the Software or any
equipment, system or network on which the Software is used will be free of vulnerability to intrusion or attack. This warranty
does not apply if the Software (a) is licensed for beta, evaluation, testing or demonstration purposes for which Datalogic does
not receive a license fee, (b) has been altered, except by Datalogic, (c) has not been installed, operated, repaired, or maintained
in accordance with instructions supplied by Datalogic, (d) has been subjected to abnormal physical or electrical stress, misuse,
negligence, or accident, or (e) is used in ultra hazardous activities. If Customer obtained the Software from a Datalogic reseller,
the terms of any warranty shall be as provided by such distributor, and Datalogic provides Customer no warranty with respect to
such Software. The Software may contain support for programs written in Java. Java technology is not fault tolerant and is not
designed, manufactured, or intended for use or resale as online control equipment in hazardous environments requiring fail-safe
performance, such as in the operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, direct
life support machines, or weapons systems, in which the failure of Java technology could lead directly to death, personal injury,
or severe physical or environmental damage. Microsoft Inc. has contractually obligated Datalogic to make this disclaimer.
7. Disclaimer of Warranties. Except as specified in this warranty, all expressed or implied conditions, representations, and
warranties including, without limitation, any implied warranty or condition of merchantability, fitness for a particular purpose, noninfringement, satisfactory quality or arising from a course of dealing, usage, or trade practice, are hereby excluded to the extent
allowed by applicable law. To the extent that an implied warranty cannot be excluded, such warranty is limited in duration to the
warranty period.
8. Disclaimer of Liabilities. In no event will Datalogic or its suppliers be liable for any lost revenue, profit, or data, or for
special, indirect, consequential, incidental, or punitive damages however caused and arising out of the use of or inability to use
the Software even if Datalogic has been advised of the possibility of such damages. In no event shall Datalogic or its suppliers'
liability to customer, whether in contract, tort (including negligence), or otherwise, exceed the price paid by customer. The
foregoing limitations shall apply even if the above-stated warranty fails of its essential purpose.
9. Term and Termination. This Agreement is effective until terminated. Customer may terminate this Agreement at any time by
destroying all copies of Software including any documentation. Customer’s license rights under this Agreement will terminate
immediately without notice from Datalogic if Customer fails to comply with any provision of this Agreement. Upon termination,
Customer must destroy all copies of Software in its possession or control.
10. Customer Records. Customer grants to Datalogic and its independent accountants the right to examine Customer’s books,
records and accounts during Customer’s normal business hours to verify compliance with this Agreement. In the event such
audit discloses non-compliance with this Agreement, Customer shall promptly pay to Datalogic the appropriate license fees.
11. General Provisions. This Agreement shall be governed by and construed in accordance with the laws of Italy. All disputes
arising out of or in connection with this Agreement will be subject to the exclusive jurisdiction of the competent Court of the
place where Datalogic has its registered office. If any portion hereof is found to be void or unenforceable, the remaining
provisions of this Agreement shall remain in full force and effect. Except as expressly provided herein, this Agreement
constitutes the entire agreement between the parties with respect to the license of the Software and supercedes any conflicting
or additional terms contained in the purchase order.
vi
REFERENCES
CONVENTIONS
This manual uses the following conventions:
If not otherwise specified, the term Datalogic Skorpio™ refers to both Datalogic
Skorpio™ and Skorpio-GUN™ mobile computers.
“User” refers to anyone using a Datalogic Skorpio™ mobile computer.
“Mobile computer” refers to Datalogic Skorpio™ mobile computer.
“You” refers to the System Administrator or Technical Support person using this
manual to install, configure, operate, maintain or troubleshoot a Datalogic Skorpio™
mobile computer.
REFERENCE DOCUMENTATION
For further information regarding Datalogic Skorpio™ refer to the SDK Help on-Line.
SERVICES AND SUPPORT
Datalogic provides several services as well as technical support through its website.
Log on to www.mobile.datalogic.com and click on the links indicated for further
information including:
-
PRODUCTS
Search through the links to arrive at your product page where you can download
specific Manuals and Software & Utilities
-
SERVICES & SUPPORT
- Datalogic Services Warranty Extensions and Maintenance Agreements
- Authorised Repair Centres
-
CONTACT US
E-mail form and listing of Datalogic Subsidiaries
vii
SAFETY REGULATIONS
NOTE
Read this manual carefully before performing any type of connection
to the Datalogic Skorpio™ mobile computer.
The user is responsible for any damages caused by incorrect use of
the equipment or by inobservance of the indication supplied in this
manual.
GENERAL SAFETY RULES
−
Use only the components supplied by the manufacturer for the specific
Datalogic Skorpio™ being used.
−
Do not attempt to disassemble the Datalogic Skorpio™ mobile computer, as it
does not contain parts that can be repaired by the user. Any tampering will
invalidate the warranty.
−
When replacing the battery pack or at the end of the operative life of the
Datalogic Skorpio™ mobile computer, disposal must be performed in compliance
with the laws in force. See also par. 4.2.
−
Do not submerge the Datalogic Skorpio™ in liquid products.
BLUETOOTH® APPROVAL
This product is equipped with the following certified Bluetooth module:
Product Name: Datalogic CE BLUETOOTH SUBSYSTEM
Bluetooth ID: B03071
Product ID: DLBTCE-02
POWER SUPPLY
This device is intended to be supplied by a UL Listed/CSA Certified Power Unit
marked "Class 2" or LPS power source rated 5 V DC, minimum 2 A which supplies
power directly to the Mini USB connector.
viii
LASER SAFETY
The laser light is visible to the human eye and is emitted from the window indicated in
the figure.
Datalogic Skorpio™ Models
Laser output window
AVOID EXPOSURE
LASER LIGHT
IS EMITTED FROM
THIS APERTURE
This product complies with
21 CFR Subchapter J
LASER LIGHT - DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
MAX. OUTPUT RADIATION 1.7 mW
EMITTED WAVELENGTH 630~680 nm
EN60825-1:2001
CAUTION-CLASS 2 LASER LIGHT WHEN OPEN - DO NOT STARE INTO BEAM
ix
Datalogic Skorpio-GUN™ Models
Laser Output Window
This product complies with 21 CFR Subchapter J
CAUTION-CLASS 2
LASER LIGHT
WHEN OPEN –
DO NOT STARE
INTO BEAM
LASER LIGHT - DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
MAX. OUTPUT RADIATION 1.7 mW
EMITTED WAVELENGTH 630~680 nm
EN60825-1:2001
AVOID EXPOSURE
LASER LIGHT
IS EMITTED FROM
THIS APERTURE
I
D
F
E
La luce laser è visibile
all'occhio
umano
e
viene emessa dalla
finestra indicata nella
figura.
Die Laserstrahlung ist für
das menschliche Auge
sichtbar und wird am
Strahlaustrittsfenster
ausgesendet (siehe Bild).
Le rayon laser est visible
à l'oeil nu et il est émis
par la fenêtre désignée
sur l'illustration dans la
figure.
La luz láser es visible al
ojo humano y es emitida
por la ventana indicada
en la figura.
LUCE LASER
NON FISSARE IL FASCIO
APPARECCHIO LASER DI
CLASSE 2
MINIMA
POTENZA
DI
USCITA:
LUNGHEZZA
D'ONDA
EMESSA:
CONFORME A EN 60825-1
(2001)
LASERSTRAHLUNG
NICHT IN DER STRAHL
BLINKEN
PRODUKT
DER
LASERKLASSE 2
MAXIMALE
AUSGANGLEISTUNG:
WELLENLÄNGE:
ENTSPR. EN 60825-1
(2001)
RAYON LASER
EVITER DE REGARDER
LE RAYON
APPAREIL
LASER
DE
CLASSE 2
PUISSANCE DE SORTIE:
LONGUER D'ONDE EMISE:
CONFORME A EN 60825-1
(2001)
RAYO LÁSER
NO MIRAR FIJO EL RAYO
APARATO
LÁSER
DE
CLASE 2
MÁXIMA POTENCIA DE
SALIDA:
LONGITUD
DE
ONDA
EMITIDA:
CONFORME A EN 60825-1
(2001)
x
ENGLISH
The following information is provided to comply with the rules imposed by
international authorities and refers to the correct use of your mobile computer.
STANDARD LASER SAFETY REGULATIONS
This product conforms to the applicable requirements of both CDRH 21 CFR 1040
and EN 60825-1 at the date of manufacture.
For installation, use and maintenance, it is not necessary to open the device.
WARNING
Use of controls or adjustments or performance of procedures other
than those specified herein may result in exposure to hazardous
visible laser light.
The product utilizes a low-power laser diode. Although staring directly at the laser
beam momentarily causes no known biological damage, avoid staring at the beam as
one would with any very strong light source, such as the sun. Avoid that the laser
beam hits the eye of an observer, even through reflective surfaces such as mirrors,
etc.
ITALIANO
Le seguenti informazioni vengono fornite dietro direttive delle autorità internazionali e
si riferiscono all’uso corretto del terminale.
NORMATIVE STANDARD PER LA SICUREZZA LASER
Questo prodotto risulta conforme alle normative vigenti sulla sicurezza laser alla data
di produzione: CDRH 21 CFR 1040 e EN 60825-1.
Non si rende mai necessario aprire l’apparecchio per motivi di installazione, utilizzo o
manutenzione.
ATTENZIONE
L'utilizzo di procedure o regolazioni differenti da quelle descritte
nella documentazione può provocare un'esposizione pericolosa
a luce laser visibile.
Il prodotto utilizza un diodo laser a bassa potenza. Sebbene non siano noti danni
riportati dall’occhio umano in seguito ad una esposizione di breve durata, evitare di
fissare il raggio laser così come si eviterebbe qualsiasi altra sorgente di luminosità
intensa, ad esempio il sole. Evitare inoltre di dirigere il raggio laser negli occhi di un
osservatore, anche attraverso superfici riflettenti come gli specchi.
xi
DEUTSCH
Die folgenden Informationen stimmen mit den Sicherheitshinweisen überein, die von
internationalen Behörden auferlegt wurden, und sie beziehen sich auf den korrekten
Gebrauch vom Terminal.
NORM FÜR DIE LASERSICHERHEIT
Dies Produkt entspricht am Tag der Herstellung den gültigen EN 60825-1 und CDRH
21 CFR 1040 Normen für die Lasersicherheit.
Es ist nicht notwendig, das Gerät wegen Betrieb oder Installations-, und WartungsArbeiten zu öffnen.
ACHTUNG
Jegliche Änderungen am Gerät sowie Vorgehensweisen, die nicht
in dieser Betriebsanleitung beschrieben werden, können ein
gefährliches Laserlicht verursachen.
Der Produkt benutzt eine Laserdiode. Obwohl zur Zeit keine Augenschäden von
kurzen Einstrahlungen bekannt sind, sollten Sie es vermeiden für längere Zeit in den
Laserstrahl zu schauen, genauso wenig wie in starke Lichtquellen (z.B. die Sonne).
Vermeiden Sie es, den Laserstrahl weder gegen die Augen eines Beobachters, noch
gegen reflektierende Oberflächen zu richten.
FRANÇAIS
Les informations suivantes sont fournies selon les règles fixées par les autorités
internationales et se réfèrent à une correcte utilisation du terminal.
NORMES DE SECURITE LASER
Ce produit est conforme aux normes de sécurité laser en vigueur à sa date de
fabrication: CDRH 21 CFR 1040 et EN 60825-1.
Il n’est pas nécessaire d’ouvrir l’appareil pour l’installation, l’utilisation ou l’entretien.
ATTENTION
L'utilisation de procédures ou réglages différents de ceux donnés
ici peut entraîner une dangereuse exposition à lumière laser
visible.
Le produit utilise une diode laser. Aucun dommage aux yeux humains n’a été
constaté à la suite d’une exposition au rayon laser. Eviter de regarder fixement le
rayon, comme toute autre source lumineuse intense telle que le soleil. Eviter aussi
de diriger le rayon vers les yeux d’un observateur, même à travers des surfaces
réfléchissantes (miroirs, par exemple).
xii
ESPAÑOL
Las informaciones siguientes son presentadas en conformidad con las disposiciones
de las autoridades internacionales y se refieren al uso correcto del terminal.
NORMATIVAS ESTÁNDAR PARA LA SEGURIDAD LÁSER
Este aparato resulta conforme a las normativas vigentes de seguridad láser a la
fecha de producción: CDRH 21 CFR 1040 y EN 60825-1.
No es necesario abrir el aparato para la instalación, la utilización o la manutención.
ATENCIÓN
La utilización de procedimientos o regulaciones diferentes de
aquellas describidas en la documentación puede causar una
exposición peligrosa a la luz láser visible.
El aparato utiliza un diodo láser a baja potencia. No son notorios daños a los ojos
humanos a consecuencia de una exposición de corta duración. Eviten de mirar fijo el
rayo láser así como evitarían cualquiera otra fuente de luminosidad intensa, por
ejemplo el sol. Además, eviten de dirigir el rayo láser hacia los ojos de un
observador, también a través de superficies reflectantes como los espejos.
LED CLASS
The Datalogic Skorpio™ XXX-9XX and XXX-2XX models which use the good read
spot LED are also a CLASS 1 LED PRODUCT.
APPARECCHIO LED CLASSE 1
PRODUKT LED KLASSE 1
PRODUIT LED DE CLASSE 1
PRODUCTO LED DE CLASE 1
RADIO COMPLIANCE
In radio systems configured with mobile computers and access points, the
frequencies to be used must be allowed by the spectrum authorities of the specific
country in which the installation takes place. Be absolutely sure that the system
frequencies are correctly set to be compliant with the spectrum requirements of the
country.
The Radio modules used in this product automatically adapt to the frequencies set by
the system and do not require any parameter settings.
The following shows the correspondence between the Datalogic Skorpio™ models
and the Radio modules:
Datalogic Skorpio™ 5XX-XXX 802.11b (Wi-Fi) radio card (Datalogic Skorpio™
models only)
Datalogic Skorpio™ 7XX-XXX 802.11b/g (Wi-Fi) radio card
xiii
Information for the User
ENGLISH
Contact the competent authority responsible for the management of radio frequency
devices of your country to verify any possible restrictions or licenses required. Refer
to the web site http://europa.eu.int/comm/enterprise/rtte/spectr.htm for further
information.
ITALIANO
Contatta l'autorità competente per la gestione degli apparati a radio frequenza del tuo
paese, per verificare eventuali restrizioni o licenze. Ulteriori informazioni sono
disponibili sul sito:
http://europa.eu.int/comm/enterprise/rtte/spectr.htm.
FRANÇAIS
Contactez l'autorité compétente en la gestion des appareils à radio fréquence de
votre pays pour vérifier d'éventuelles restrictions ou licences. Pour tout
renseignement vous pouvez vous adresser au site web:
http://europa.eu.int/comm/enterprise/rtte/spectr.htm.
DEUTSCH
Wenden Sie sich an die für Radiofrequenzgeräte zuständige Behörde Ihres Landes,
um zu prüfen ob es Einschränkungen gibt, oder eine Lizenz erforderlich ist. Weitere
Informationen finden Sie auf der Web Seite:
http://europa.eu.int/comm/enterprise/rtte/spectr.htm.
ESPAÑOL
Contacta la autoridad competente para la gestión de los dispositivos de radio
frecuencia de tu país, para verificar cualesquiera restricciones o licencias posibles
requerida. Además se puede encontrar mas información en el sitio web:
http://europa.eu.int/comm/enterprise/rtte/spectr.htm.
xiv
FCC COMPLIANCE
Modifications or changes to this equipment without the expressed written approval of
Datalogic could void the authority to use the equipment.
This device has been tested and found to comply with the limits for a CLASS A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
FCC ID U4G0020.
All 5XX-XXX Wi-Fi models are not FCC certified (Datalogic Skorpio™ models only).
All 7XX-XXX Wi-Fi models contain FCC ID TWG-SDCCF10G.
SAR COMPLIANCE
This product has been tested and found to comply with the following standards:
- OET BULLETIN 65 SUPPLEMENT C: evaluating compliance with FCC guidelines
for human exposure to radio frequency electromagnetic fields.
- Australian Radiation Protection And Nuclear Safety Agency (ARPANSA): radiation
protection series publication No. 3: maximum exposure levels to radio frequency
fields 3 KHz TO 300 GHz.
PATENTS
This product is covered by one or more of the following patents:
U.S. patents: 5,992,740; 6,808,114B1; 6,997,385B2;
European patents: 681,257B1; 789,315B1; 1,128,315B1.
Additional patents pending.
xv
WEEE COMPLIANCE
Informazione degli utenti ai sensi della Direttiva Europea 2002/96/EC
L’apparecchiatura che riporta il simbolo del bidone barrato deve essere smaltita, alla fine della
sua vita utile, separatamente dai rifiuti urbani.
Smaltire l’apparecchiatura in conformità alla presente Direttiva consente di:
evitare possibili conseguenze negative per l’ambiente e per la salute umana che
potrebbero invece essere causati dall’errato smaltimento dello stesso;
recuperare materiali di cui è composto al fine di ottenere un importante risparmio di
energia e di risorse.
Per maggiori dettagli sulle modalità di smaltimento, contattare il Fornitore dal quale è stata
acquistata
l’apparecchiatura
o
consultare
la
sezione
dedicata
sul
sito
www.mobile.datalogic.com.
Information for the user in accordance with the European Commission Directive
2002/96/EC
At the end of its useful life, the product marked with the crossed out wheeled wastebin must be
disposed of separately from urban waste.
Disposing of the product according to this Directive:
avoids potentially negative consequences to the environment and human health
which otherwise could be caused by incorrect disposal
enables the recovery of materials to obtain a significant savings of energy and
resources.
For more detailed information about disposal, contact the supplier that provided you with the
product in question or consult the dedicated section at the website www.mobile.datalogic.com.
Information aux utilisateurs concernant la Directive Européenne 2002/96/EC
Au terme de sa vie utile, le produit qui porte le symbole d'un caisson à ordures barré ne doit pas
être éliminé avec les déchets urbains.
Éliminer ce produit selon cette Directive permet de:
xvi
éviter les retombées négatives pour l'environnement et la santé dérivant d'une
élimination incorrecte
récupérer les matériaux dans le but d'une économie importante en termes d'énergie
et de ressources
Pour obtenir des informations complémentaires concernant l'élimination, veuillez contacter le
fournisseur auprès duquel vous avez acheté le produit ou consulter la section consacrée au site
Web www.mobile.datalogic.com.
Información para el usuario de accuerdo con la Directiva Europea 2002/96/CE
Al final de su vida útil, el producto marcado con un simbolo de contenedor de bassura móvil
tachado no debe eliminarse junto a los desechos urbanos.
Eliminar este producto de accuerdo con la Directiva permite de:
evitar posibles consecuencias negativas para el medio ambiente y la salud derivadas
de una eliminación inadecuada
recuperar los materiales obteniendo así un ahorro importante de energía y recursos
Para obtener una información más detallada sobre la eliminación, por favor, póngase en
contacto con el proveedor donde lo compró o consultar la sección dedicada en el Web site
www.mobile.datalogic.com.
Benutzerinformation bezüglich Richtlinie 2002/96/EC der europäischen Kommission
Am Ende des Gerätelebenszyklus darf das Produkt nicht über den städtischen Hausmüll
entsorgt werden. Eine entsprechende Mülltrennung ist erforderlich.
Beseitigung des Produkts entsprechend der Richtlinie:
verhindert negative Auswirkungen für die Umwelt und die Gesundheit der Menschen
ermöglicht die Wiederverwendung der Materialien und spart somit Energie und
Resourcen
Weitere Informationen zu dieser Richtlinie erhalten sie von ihrem Lieferanten über den sie das
Produkt
erworben
haben,
oder
besuchen
sie
unsere
Hompage
unter
www.mobile.datalogic.com.
xvii
GENERAL VIEW
Datalogic Skorpio™ Models
B C
D
H
A
I
J
E
F
G
A)
B)
C)
D)
Transflective display
User programmable LED
Speaker
Charging status and battery low
warning LED
E) Scan key
K
F)
G)
H)
I)
J)
Keyboard
Microphone
Laser safety label
Product label
Adjustable elastic strap with stylus
holders
K) Battery pack
M
N
L
L) Data Capture/Laser Output Window
M) Mini USB connector
xviii
N) RS232/USB Communication
/Charger pins
Datalogic Skorpio-GUN™ Models
B
C
D
A
H
E
I
J
F
K
G
A)
B)
C)
D)
Transflective display
User programmable LED
Speaker
Charging status and battery low
warning LED
E) Scan key
L
L)
Mini USB connector
F)
G)
H)
I)
J)
K)
Keyboard
Microphone
Battery pack
Laser safety label
Data Capture/Laser Output Window
Trigger Scan Key
M
M) RS232/USB Communication /Charger pins
xix
xx
INTRODUCTION
1
1
INTRODUCTION
1.1
1.1.1
DATALOGIC SKORPIO™ DESCRIPTION
Datalogic Skorpio™
Datalogic Skorpio™ is a rugged mobile computer particularly suitable for mobile
commerce solutions in the retail environment, both on store shelves and in the stock
room.
Thanks to one of the best ergonomics ever seen on the market, Datalogic Skorpio™
reduces operator fatigue with no compromise in terms of reliability and robustness,
resisting harsh environments, multiple drops, strong shocks and repetitive tumbles.
Datalogic Skorpio™ offers the unique feature of integrated data capture technology
combined with “green spot” feedback (Datalogic patent), providing a ”good read”
green dot directly on the code, where the operator usually tends to be looking.
Datalogic Skorpio™ system architecture is based on the Intel X-Scale PXA-270
series processors coupled with the Windows CE 5.0 operating system. It is ready to
satisfy the most demanding customer needs (i.e. expandable memory thanks to the
Mini Secure Digital standard slot).
Its wireless communication capabilities (Bluetooth®, Wi-Fi) enable fast transactions
and complete interaction with the information system, as well as wearable
peripherals, while its long lasting Li-ION batteries grant full shift coverage in terms of
autonomy.
Furthermore, its large high visibility color graphic display with touch screen helps
users work more efficiently, while the practical 38-key “alpha & numeric” keypad
allows data, codes and descriptions to be input very quickly.
Datalogic Skorpio™ is able to fulfill 100% of traditional text-based applications (i.e.
terminal emulation, through the DL-TCL-NET™ software client) as well as the most
modern Web-based solutions (i.e. exploiting Microsoft Internet Explorer through the
DL Locked-Web-Browser application).
Developers can create
rapidly exploiting the
management of mobile
updating firmware and
Avalanche software.
and deploy single or multiple data collection applications
MCL Collection, while IT managers can centralize the
devices revising configurations, synchronizing software and
drivers remotely and seamlessly thanks to the Wavelink
Datalogic Skorpio™ offers retailers the best mobile commerce solution to gain the
greatest benefit in the least time for those “selling and serving on the move”!
1
DATALOGIC SKORPIO™/ SKORPIO-GUN™
1
1.1.2
Datalogic Skorpio-GUN™
Datalogic Skorpio-GUN™ is a compact, lightweight and robust pistol grip mobile
computer, particularly suitable for warehousing solutions and bar code scanning
intensive applications, especially in the retail environment.
Datalogic Skorpio-GUN™ does not compromise in reliability and ruggedness. It is
designed for use in hostile environments and can resist multiple drops, repeated
knocks and accidental bumps.
Excellent ergonomics and lightweight make the operator’s job less tiring, while its
long lasting Li-ION batteries grant full shift coverage in terms of autonomy.
The powerful laser reader combined with a “green spot” (Datalogic patent) for good
read feedback directly on the code simplify the operator’s activities, while the Long
Range reading option allows codes to be read from near contact to several meter
distances.
Datalogic Skorpio-GUN™ system architecture is based on the Intel X-Scale PXA-270
series processors coupled with the Windows CE 5.0 Operating System.
Its wireless communication capabilities (Bluetooth®, Wi-Fi® certified 802.11b/g)
enable fast transactions and complete interaction with information systems including
the newest RF security protocols such as WPA™ and WPA2™.
Datalogic Skorpio-GUN™ large high visibility color graphic display with touch screen
helps users work more efficiently, while the practical 38-key “alpha & numeric”
keypad allows data, codes and descriptions to be input very quickly.
Datalogic Skorpio-GUN™ fulfils 100% of traditional text-based applications (i.e.
terminal emulation, through the DL-TCL-NET™ software client) as well as the most
modern Web-based solutions (i.e. exploiting Microsoft Internet Explorer through the
DL Locked-Web-Browser application).
Developers can create and deploy single or multiple data collection applications
rapidly exploiting MCL Collection™, while IT managers can centralize mobile device
management by revising configurations, synchronizing software and updating
firmware and drivers remotely and seamlessly thanks to the Wavelink Avalanche
software.
Datalogic Skorpio-GUN™ responds to market needs for a device with a pistol grip,
which is light and well balanced, compact and robust, with the latest generation of
hardware and software and wireless communication.
2
INTRODUCTION
1.2
1
AVAILABLE MODELS
The brand new Datalogic Skorpio™ is available in different models depending on the
options it is equipped with. Options are listed below:
•
communication options: Wi-Fi 802.11b (Datalogic Skorpio™ models only), Wi-Fi
802.11b/g, Bluetooth®
•
capture options: Miniature Laser Modules, Long Range Modules (Datalogic
Skorpio-GUN™ models only)
•
compute options: O.S. version, microprocessor type/speed, memory size
For further details about the Datalogic Skorpio™ models refer to the web site:
http://www.mobile.datalogic.com.
1.3
PACKAGE CONTENTS
The Datalogic Skorpio™ package contains:
−
1 Datalogic Skorpio™ mobile computer
−
1 CD-ROM Datalogic SDK
−
1 stylus
−
1 user’s manual
−
1 rechargeable battery pack
−
1 elastic strap with stylus holder
−
1 belt clip
−
1 belt clip pivot
The Datalogic Skorpio-GUN™ package contains:
−
1 Datalogic Skorpio-GUN™ mobile computer
−
1 CD-ROM Datalogic SDK
−
1 stylus
−
1 stylus cord (small)
−
1 wrist strap
−
1 user’s manual
−
1 rechargeable battery pack
3
1
DATALOGIC SKORPIO™/ SKORPIO-GUN™
Other accessories necessary for the Datalogic Skorpio™ connection to the host
computer and to the network, must be ordered separately: the cradle, power supply,
and one or more connection cables.
Remove all the components from their packaging; check their integrity and congruity
with the packing documents.
Keep the original packaging for use when sending products to the
technical assistance center. Damage caused by improper
packaging is not covered under the warranty.
CAUTION
Rechargeable battery packs are not initially charged. Therefore the
first operation to perform is to charge them. See paragraph 4.1.
NOTE
4
INTRODUCTION
1.4
1
INSERTING MINI SD CARD
Datalogic Skorpio™ provides the possibility to add a mini storage disk to increase the
on-board memory capacity. To access the Mini SD card slot and to insert the card,
proceed as follows:
1a. Turn off the Datalogic Skorpio™ and remove the battery pack, by turning its
lock screw to the open position (horizontal) and pulling the lock runner up.
1b. Turn off the Datalogic Skorpio-GUN™ and remove the battery pack, by
pulling the battery latch down.
5
DATALOGIC SKORPIO™/ SKORPIO-GUN™
1
2.
Remove the Mini SD card slot’s protective rubber cover.
3.
Insert the card with the written part upward (as shown in the figure) and
push it in, aided by the stylus, until it clicks into place.
To recognize the card simply turn off and turn on the Datalogic Skorpio™.
See par. 3.4.
To remove the Mini SD card, just push it toward the inside, aided by the
stylus, until it clicks; a spring system will return it out.
CAUTION
6
Follow proper ESD precautions to avoid damaging the SD. Proper ESD
precautions include, but are not limited to, working on an ESD mat and
ensuring that the operator is properly grounded.
Do not force the card. If you feel resistance, remove the card, check
the orientation, and reinsert it.
Do not use the SD card slot for any other accessories.
INTRODUCTION
1.5
1
USING THE BELT CLIP
To use the belt clip (in Datalogic Skorpio™ models only), proceed as follows:
1.
Remove the elastic strap and unscrew the strap pivot.
2.
Screw the belt clip pivot on the terminal by using the fixing screw.
7
1
DATALOGIC SKORPIO™/ SKORPIO-GUN™
3.
Insert the terminal in the belt clip by sliding the belt clip pivot into the belt clip
until it clicks into place.
4.
To release the terminal, press the belt clip unlock button.
8
INTRODUCTION
1.6
1
STYLUS HOLDER
The Stylus holder is located in the handle of the Datalogic Skorpio-GUN™ models
only:
1.7
ATTACHING THE WRIST STRAP
Attach the Wrist Strap (in Datalogic Skorpio-GUN™ models only) as shown in the
figures below:
1
2
3
9
DATALOGIC SKORPIO™/ SKORPIO-GUN™
1
1.8
ACCESSORIES
Cradles
94A151099 Datalogic Skorpio™ Single Cradle USB for USB communication
94A151112 Datalogic Skorpio™ Ethernet Multi Cradle for Ethernet connection
94A151113 Datalogic Skorpio™ Serial/Modem Cradle for RS232 and Modem connection
94A151092 Datalogic Skorpio™/F-Color Single Cradle for RS232 communication only
94A151091 Datalogic Skorpio™/F-Color Multiple Cradle for RS232 communication only
Charger
94A151114 Datalogic Skorpio™ Multi-Battery Pack Charger (4 slots)
Batteries
94ACC1309 Datalogic Skorpio™ Standard Battery Pack (Li-Ion battery pack 2100
mAh@3.7 V)
Power Supply
94ACC1312 PG5-20 MiniUSB AC/DC Power Supply (without Cord)
94ACC1322 PG5-20 MiniUSB AC/DC Power Supply EU KIT
94ACC4595 FPS18 Power Supply without power cord for Single Cradle Desk, for
MBC8600 Multi-Battery Charger
94ACC1150 Power Cord EU 3-pin (5pcs)
Cables
94A051016 CAB-421 USB Type A-B Mini Straight
94A051017 CAB-381 USB Type A-B Straight
94A051024 CAB USB Type Standard A (4 pin F) to Mini A (5 pin M)
Various
94ACC1311 Datalogic Skorpio™ Functional Case
94ACC1301 Stylus Pen (20 pcs)
NOTE
10
Use only a Datalogic Mobile-approved power supply and cables. Use
of an alternative power supply will invalidate any approval given to
this device and may be dangerous.
CONNECTIONS
2
2.1
2
CONNECTIONS
USB CONNECTION
You can use a standard mini USB cable to connect the Datalogic Skorpio™ to a host
computer to transfer data.
A
B
C
Key:
A Host computer
B Datalogic Skorpio™
C 94A051016 (Standard Mini USB cable)
For USB communication using the USB cradle it is necessary to insert the power
supply plug into the power jack on the base of the cradle and attach the power supply
to a power outlet. Once the Host has been turned on, insert the Datalogic Skorpio™
terminal into the cradle.
A
B
C
D
Key:
A
B
Host computer
94A051017 USB type
A-B Straight Cable
C
D
Datalogic Skorpio™ Single USB Cradle
Power Supply*
* Recommended Power Supply: FPS18 AC/DC Power Supply (94ACC4595).
11
DATALOGIC SKORPIO™/ SKORPIO-GUN™
2
2.2
CONNECTION TO USB PERIPHERALS
You can use a standard A (4 pin female) to mini A (5 pin male) USB cable to connect
the Datalogic Skorpio™ to a keyboard or a memory. For all these devices maximum
current withdrawal must be below 100mA.
A
B
C
Key:
A Keyboard with USB interface
B Datalogic Skorpio™
C 94A051024 (Standard A to Mini A USB cable)
A
B
C
Key:
A Memory with USB interface
B Datalogic Skorpio™
C 94A051024 (Standard A to Mini A USB cable)
Datalogic Skorpio™ works with most of mentioned USB peripherals. In
any case, we can’t guarantee good operations with all devices
available on market place.
NOTE
12
CONNECTIONS
2.3
2
RS232 CONNECTION
The Datalogic Skorpio/F-Color Serial cradle (single or multiple) and the Datalogic
Skorpio Serial/Modem Cradle can be connected to the Host by cable 94A054000 for
9-pin connections.
The RJ45 connector of the desired cable must be connected to the RS232 port of the
cradle.
Then, it is necessary to insert the power supply plug into the power jack on the base
of the cradle and attach the power supply to a power outlet.
Once the Host has been turned on, insert the Datalogic Skorpio-GUN™ terminal into
the cradle.
The same connection can be performed through
Datalogic Skorpio/F-Color single or multiple serial cradles.
A
or
one
of
the
B
C
D
Key:
A) Host computer
B) 94A054000
cable
9-pin
C) Datalogic Skorpio™ Serial/Modem Cradle
or Datalogic Skorpio/F-Color Single Cradle
or Datalogic Skorpio/F-Color Multiple Cradle
serial D) Power Supply*
* Recommended Power Supply: FPS18 AC/DC Power Supply (94ACC4595).
13
DATALOGIC SKORPIO™/ SKORPIO-GUN™
2
2.4
MODEM CONNECTION
The Datalogic Skorpio™ Serial/Modem Cradle has an integrated modem and
provides a modem connector, which can be used with an RJ11 connector. It can be
connected to a telephone line to transfer data to a Host.
B
A
C
Key:
A) Phone line to remote Host
B) Datalogic Skorpio™ Serial / Modem Cradle
C) Power Supply*
* Recommended Power Supply: FPS18 AC/DC Power Supply (94ACC4595).
It is mandatory to use an appropriate custom software application that calls the
DLDEVICE_SetCradleModem function in the SDK in order to use the cradle
integrated modem port.
Refer to the Datalogic Skorpio™ Serial/Modem Cradle instructions for further details.
2.5
ETHERNET CONNECTION
The Datalogic Skorpio™ Ethernet Multi Cradle provides an Ethernet connection.
Connect the Ethernet cradle (Ethernet port 1) to an Ethernet hub or switch. Connect
the power jack to power supply*.
A
B
C
Key:
A) Datalogic Skorpio™ Ethernet Multi Cradle
B) Ethernet hub
C) Power Supply*
* Recommended Power Supply: FPS18 AC/DC Power Supply (94ACC4595).
Refer to the Datalogic Skorpio™ Ethernet Multi Cradle instructions for further details.
14
CONNECTIONS
2.6
2
WLAN CONNECTION
Datalogic Skorpio™ Wi-Fi 802.11b and Wi-Fi 802.11b/g1 models can communicate
with the host using the on-board radio frequency module and an Access Point
connected to the host computer.
For models using the WiFi7 radio (7xx-xxx-xxx models), you can find information
about the applet for radio configuration: http://www.summitdatacom.com/SCU.htm.
To launch this utility you can tap the specific icon if it's visible on the taskbar or you
can open Connections folder or Control Panel from desktop and select the 'Summit
Client Utility' icon.
A
B
C
Key:
A) Datalogic Skorpio™
B) Access point
C) Host – Application Server
1
Note: unless otherwise specified, the Wi-Fi term is used both for the 802.11b and the 802.11b/g cards.
15
2
DATALOGIC SKORPIO™/ SKORPIO-GUN™
Wi-Fi module is on by default, in order to avoid wasting energy, you
can switch it off using the Wireless Communications applet.
NOTE
NOTE
NOTE
16
Suspending the terminal powers off the 802.11b/g radio and drops
the radio connection. When the terminal resumes, depending on the
radio power mode and security protocol selected, it takes
approximately from 10 to 30 seconds for the 802.11b/g radio driver to
re-associate the radio to the network.
Area coverage and radio performance may vary, due to
environmental conditions, access points types or interference caused
by other devices (microwave ovens, radio transmitters, etc.)
CONNECTIONS
2.7
2
WPAN CONNECTIONS
Datalogic Skorpio™ Bluetooth® models can communicate with a Bluetooth® device,
®
such as a printer, within a range of 10 m, using the on-board Bluetooth module.
A
B
Key:
A) Datalogic Skorpio™
®
B) Bluetooth printer
NOTE
In order to avoid wasting energy, the Bluetooth® module is off by
default. If you need to have Bluetooth® working, the module must be
powered on using the Wireless Communications applet (see par. 0),
and perform the Discovery procedure (see par. 3.8.3).
NOTE
Suspending the terminal powers off the Bluetooth® radio and drops
the piconet (Bluetooth® connection). When the terminal resumes, it
®
takes approximately 10 seconds for the Bluetooth radio driver to reinitialize the radio.
NOTE
Area coverage and Bluetooth® radio performance may vary, due to
environmental conditions or interference caused by other devices
(microwave ovens, radio transmitters, etc.), etc.
17
DATALOGIC SKORPIO™/ SKORPIO-GUN™
3
3
USE AND FUNCTIONING
The use of the Datalogic Skorpio™ depends on the application software loaded.
However there are several parameters that can be set and utilities that can be used
to perform some basic functions such as data capture, communications, file
management, etc.
3.1
STARTUP
The Datalogic Skorpio™ turns on when the battery pack or the external supply is
inserted.
After the battery pack is installed, use the [ON/OFF] key to turn the mobile computer
on and off.
As soon as the mobile computer is on, the Windows CE desktop configuration will
appear on the screen. Wait a few seconds before starting any activity so that the
mobile computer completes its startup procedure.
Use the stylus as suggested in paragraph 3.2 to select icons and options.
18
USE AND FUNCTIONING
3
The mobile computer goes into power-off (low power with display backlight off), when
it is no longer used for more than a programmable timeout, which is defined in the
POWER applet of the Control Panel. In this mode it can be awakened (resuming
operation) by the [ON/OFF] key or SCAN key if enabled (see par. 3.7.1).
The mobile computer can also be awakened or turned off by the
application program.
NOTE
19
DATALOGIC SKORPIO™/ SKORPIO-GUN™
3
3.2
USING THE STYLUS
The stylus selects items and enters information. The stylus functions like a mouse.
Double Tap:
Touch the screen twice with the stylus to open items and select
options.
Drag:
Hold the stylus on the screen and drag across the screen to
select text and images. Drag in a list to select multiple items.
Tap-and-hold:
Tap and hold the stylus on an item to see a list of actions
available for that item. On the pop-up menu that appears, tap the
action you want to perform.
To recalibrate the touch screen use the Stylus Applet (see par. 3.7.6).
Use only original Datalogic styluses supplied with the product itself.
In harsh applications, use of screen protectors should be taken into
CAUTION consideration, in order to extend the touch screen operating life.
To prevent damage to the screen, do not use sharp devices or any
device other than the Datalogic Mobile-provided stylus.
Do not apply not necessary high pressures on the screen.
For applications where an intensive use of the touch screen is foreseen,
please consider that touch screen components are subject to
progressive wear.
20
USE AND FUNCTIONING
3.3
3
DATA CAPTURE
To capture data first of all select the barcode icon on the bottom-right side of the
display and tap the 'Capture' menu item then proceed with the following directions.
To configure and enable data capture parameters refer to par. 3.6.
3.3.1
Laser Data Capture
To scan barcodes, point the Datalogic Skorpio™ laser model onto the code from a
distance within the reading range while pressing the SCAN key.
The lighted band emitted by the laser must completely intercept the barcode as
shown in the figure below. If enabled, the emission of an acoustic signal will indicate
that the scan has taken place correctly.
21
3
3.4
DATALOGIC SKORPIO™/ SKORPIO-GUN™
DESCRIPTION OF THE KEYS
The Datalogic Skorpio™ provides a 38-key alphanumeric keyboard. The following
image shows this keyboard.
22
USE AND FUNCTIONING
3
Main Keys Function
KEY
FUNCTION
It starts data capture. If enabled, it also wakes up the
mobile computer from low-power (see par. 3.7.1).
For Datalogic Skorpio-GUN™ models only, the trigger
performs the same function as the SCAN key.
They let you move forwards, backwards, upwards or
downwards within text fields, scroll through a Menu list or
browse among folder files.
After a blue modifier key press, the blue arrows allow
moving forwards or backwards within the Internet
Explorer browser pages.
Yellow modifier: when pressed before a standard key, it
enables the character printed in yellow above the key.
All yellow characters will remain selectable until the
yellow modifier key is pressed again.
Blue modifier: when pressed before a standard key, it
enables the function printed in blue above the key. After
the function is selected the keyboard returns to standard
mode.
After a blue modifier key press, subsequent key presses
allow the selection of seldom used characters (symbols).
The selected character is entered after a short timeout
or if a different key is pressed.
It powers the Datalogic Skorpio™ ON or OFF. It is
recessed to avoid accidental power off during use.
After a blue modifier key press, it allows returning to the
Home page.
After a blue modifier key press, it allows ending a page
downloading.
After a blue modifier key press, it performs a page
refresh.
23
DATALOGIC SKORPIO™/ SKORPIO-GUN™
3
Special Function Icons
ICON
FUNCTION
After a blue modifier key press, it opens the Start menu.
After a blue modifier key press, it opens the file manager.
After a blue modifier key press, it modifies the display backlight
intensity (5 levels available through subsequent presses).
After a blue modifier key press, it locks and unlocks the keyboard.
24
USE AND FUNCTIONING
3.4.1
3
Resetting the Skorpio
There are several reset methods for the Skorpio.
A warm boot terminates an unresponsive application and clears the working RAM,
but preserves both the file system and the registry.
A cold boot forces all applications to close and clears working RAM and files not
resident on the persistent flash memory. Registry is restored from persistent memory
if available or returned to factory default.
A Clean Boot restores the Skorpio to factory configuration: registry and file system
return to factory default.
Warm Boot
A warm boot closes all applications, clears the working RAM, but preserves the file
system and registry. If an application "hangs" initiate a warm boot to terminate the
application.
To perform a warm boot, press and hold (for a while) these keys simultaneously:
Cold Boot
A cold boot is a complete reset of the Skorpio in which all applications are forcibly
closed and RAM is completely cleared. Registry is restored from persistent memory if
a saved copy is available (see 3.7.2) and RAM file system completely erased. You
will lose any applications and data (registry too) which are not stored in persistent
flash memory.
A cold boot is necessary when the Windows CE operating system locks up and the
warm boot command does not work.
To perform a cold boot, press these keys simultaneously:
Clean Boot
A clean boot is a cold boot that causes the device to be restored to factory
configuration. The Skorpio will reset to its factory configuration, clear the working
RAM and initialize the file system. You will lose any applications and data stored in
persistent flash memory. At the next startup the system will ask to recalibrate the
touch screen.
To perform a clean boot, follow these steps:
1.
2.
Perform a Cold Boot (see Cold Boot).
Quickly release all the keys when the screen goes black.
25
DATALOGIC SKORPIO™/ SKORPIO-GUN™
3
3.
4.
5.
Within 1 second press and hold down the Esc and 0 keys until the left orange led
starts blinking.
Release the Esc and 0 keys.
Enter 1 to proceed with the Clean Boot sequence. Enter 0 to cancel the Clean
Boot and proceed with a Cold Boot.
Registry
Warm
Boot
Preserved
Flash Disk (Backup Preserved
Folder)
RAM File System
Preserved
CAUTION
26
Cold Boot
Restored from
available)
Preserved
Clean Boot
flash
(if Factory
default
Clean disk
Reinitialized (factory default)
Factory
default
Before performing a reset, it is recommended to:
execute a system backup to keep your more important files
and applications persistent. See par. 3.9;
save the registry to non-volatile memory to guarantee the
persistence of the Windows configuration. See par. 3.7.2.
USE AND FUNCTIONING
3.5
3.5.1
3
STATUS INDICATORS
LED Status
The Datalogic Skorpio™ provides two different LEDs signaling the mobile computer
status.
LED
STATUS
Good Read and
General Purpose
(left-side)
Green
It is constant for a configurable time to
signal that a successful read has
occurred.
Green/Red
It is also available to the application
program.
Charging Status and Green constant
Battery Low Warning
It is constant once the charging process
has been completed.
(right side)
Red blinking
When the mobile computer is powered
by the battery (not by the cradle nor by
the cable), this LED blinks red to signal
that the battery is running down.
Red constant
It is constant while charging.
Orange blinking
It blinks when a charging error has
occurred, for example when safe
charging timeout has expired.
27
DATALOGIC SKORPIO™/ SKORPIO-GUN™
3
3.5.2
Taskbar
As well as tasks opened in Windows, the Taskbar provides several status icons that
report information about the time, the battery level, the keyboard function, and the
decoding status.
ICONS
DESCRIPTION
Time and Battery Icons
It displays the time.
They are representative of five different icons indicating
the battery level. The icon is partially green when the
power left is >20% and partially red colored when the
power left is <20%.
It indicates that the mobile computer is powered by a
USB connector or through the cradle.
Keyboard Status Icons
It indicates that the blue modifier key has been pressed
and is going to affect the next key press.
It indicates that the yellow modifier key has been
pressed and is going to affect the next key press.
It indicates that the yellow modifier key has enabled the
selection of the characters printed in yellow above the
keyboard.
It indicates the standard keys selection, so that the
yellow modifier key has not been pressed.
It indicates that the yellow modifier key has enabled the
selection of the characters printed in yellow above the
keyboard and the Capslock is active.
It indicates that the keyboard is locked.
Decoding Status Icons
It indicates that the decoder is active (green), not active
(grey).
28
USE AND FUNCTIONING
3.6
3
DATA CAPTURE CONFIGURATION
From the Windows CE Taskbar, tap the "Decoding" icon to open a drop–down menu.
Decoding can also be accessed from the Control Panel.
By selecting the Info item from this drop-down menu you can access information
about the Scanner and the Software; the Configure item opens the configuration
applet (Data Capture Configuration Window), while Capture accesses the data
capture applet (Data Capture Window), which enables code reading.
The last menu item (Wedge) enables Wedge Emulation.
3.6.1
Configure
The Configuration applet contains the barcode scanning configuration parameters in
a directory tree structure. The available barcode parameters are divided into two
groups: Reader Parameters and Scan Parameters.
The Reader Parameters depend on the type of scanner module installed on the
mobile computer and allow barcode configuration (i.e. enable/disable Code 39, check
digit control, etc.).
The Scan Parameters are common to all scanner modules and allow control of the
scanning device (i.e. LED control, laser timeout, etc.).
Each Data Capture screen window corresponds to a branch of the tree, and the
name of the current branch is displayed at the bottom of each screen window.
29
3
DATALOGIC SKORPIO™/ SKORPIO-GUN™
Data Capture Configuration Window
The screen format shows two columns where the left column indicates branches or
parameters. Branches have three dots in the right column (...). You can navigate
through the tree structure using the stylus or keyboard arrows directly on the item
field or from the menu.
Parameters have their corresponding current values in the right column. You can edit
parameter values using the stylus or keyboard arrows directly on the item field or
from the menu. To change a value for example, select the line of the value to be
changed, choose Edit from the Parameter Menu then choose a new value from the
values listed in the box (see following figures).
Selecting Data Capture Setup Parameters
30
USE AND FUNCTIONING
3
Alternatively using the stylus, you can tap once directly on the value on the right
column; continue tapping until the desired value is reached.
To activate a new configuration select the File ->Save Menu to send the new
configuration to the barcode decoding software and save the new configuration. This
will save the configuration to non-volatile memory preventing loss at the next system
reset.
Reader Parameters
The barcode reading parameters and values are dependent upon the type of scanner
module mounted in your mobile computer. For a detailed list of parameters and of
their configuration procedures, please refer to the SDK Help file on the CD.
Scan Parameters
The Scan Parameters are common to all scanner modules and allow control of the
scanning device. The Scan parameters are described as follows:
ScanTimeout: the maximum time, in milliseconds, during which the scanner remains
on without decoding any barcode.
GoodReadSound: is the filename of a .wav file played when the scanner reads a
code.
LedDuration: the length of the good-read led pulse, in milliseconds.
LedPulses: the number of times the good-read led pulse is emitted when the
scanner reads a code.
ContinuousMode: when enabled, the scanner can only be turned off by releasing
the SCAN key, or if Soft Trigger is enabled, by the application program. Continuous
Mode overrides Scan Timeout.
KeyboardEmulation: if enabled all scanned data are transformed into keyboard
events and can therefore be displayed and saved to a file as if input from the mobile
computer keyboard. If set to "Yes (Clipboard)", it copies the scanned data to the
system clipboard.
SoftTrigger: when enabled, the laser can be turned on/off by the application
software.
ScanAlwaysOn: enables the scanner for barcode reading independently from the
application software. If set to "Disabled after read", it disables the reading after a
reading attempt. In case the scan button is accidentally pressed, this selection
prevents the driver from decoding new data while the application is still elaborating
previous data.
31
3
DATALOGIC SKORPIO™/ SKORPIO-GUN™
Green Spot Duration: determines the duration (measured in milliseconds) of the
green spot feedback, which provides a ”good read” green dot directly on the code,
where the operator usually tends to be looking.
NotPrintableChar: if set to "Remove", all not printable characters included in the
scanned data are deleted and the final barcode will include only printable characters.
ScanButton: it activates/deactivates the scanner for bar code reading.
32
USE AND FUNCTIONING
3
Default Settings
The following tables contain the default values for the major barcode setup
parameters, according to the type of scan engine mounted on the mobile computer.
For a complete list of parameters and of their configuration procedures, please refer
to the SDK Help file on the CD.
SCAN PARAMETERS
ScanTimeout
GoodReadSound
LedDuration
LedPulses
ContinuousMode
KeyboardEmulation
SoftTrigger
ScanAlwaysOn
GreenSpotDuration
NotPrintableChar
ScanButton
5000
Beep.wav
200 mS
1
Disabled
Enabled
Enabled
Disabled
1000
Leave
Enable
BARCODE SYMBOLOGY
SPECIFIC READER PARAMETERS
UPC A
UPC E
EAN 8
EAN 13
Code 39
Code 39 Full ASCII
Code 32
2/5: Interleaved
2/5: Industrial
2/5: Matrix
Code 128
EAN 128
Codabar
Enabled
Enabled
Enabled
Enabled
Enabled
Disabled
Disabled
Enabled
Disabled
Disabled
Enabled
Enabled
Enabled
BARCODE SYMBOLOGY
SPECIFIC READER PARAMETERS
MSI
Plessey
Code 93
Code 11
Enabled
Disabled
Disabled
Disabled
33
DATALOGIC SKORPIO™/ SKORPIO-GUN™
3
3.6.2
Capture
The Data Capture applet (Capture) enables code reading.
Data Capture Window
Data Capture can also be enabled through the Configuration applet by selecting File
->Scanner from the main menu, or by enabling the parameter Scan Always On in the
Scan Parameters branch.
Enabling the Data Capture
34
USE AND FUNCTIONING
3.7
3
CONTROL PANEL
From the Windows CE Desktop, double tap on the "My Device" icon and then double
tap on the "Control Panel" icon to open the Windows CE control panel main window.
The Control Panel can also be launched from Start ->Settings ->Control Panel.
APPLET programs are displayed as icons; one icon corresponds to each APPLET.
Control Panel
3.7.1
Buttons
The BUTTONS Applet allows assigning desired applications to be launched by one
of the function keys (F1, F2, F3, F4).
You can also select to wake up the terminal by the SCAN key and trigger key (for
Datalogic Skorpio-GUN™ only).
35
DATALOGIC SKORPIO™/ SKORPIO-GUN™
3
3.7.2
Registry
The REGISTRY ADMIN applet provides management of Windows CE registry.
Select the REGISTRY ADMIN applet by double tapping the Registry Admin icon.
The Registry Administration Main window appears. Two functions are available:
-
Save Registry allows permanently saving the Windows configuration (example:
custom configuration of screen desktop background color, or network adapter
configuration) to non-volatile memory (SAVE button).
-
Restore Default Registry allows restoring the initial factory default configuration
(Restore Default button). After restoring the factory default configuration, you
must perform a warm boot.
Saving the registry to non-volatile memory guarantees the persistence of the
Windows configuration in case of battery pack replacement and in case of a Cold
Boot.
Registry Administration Window
36
USE AND FUNCTIONING
3.7.3
3
Files Admin
The FILES ADMIN applet enables control of the permanence of files in the System
Folder. Two functions are available on the Files Admin Main window by means of two
buttons:
Files Admin Main Window
Save Session: with this button all files will be permanently saved in the \Windows
directory in non-volatile memory. This function guarantees the steady maintenance of
every file produced during the current working session - even of sub-directories and
relevant files - with the exception of the files belonging to the FLASH image.
These current working session files will be backed-up in the \Backup\Windows
directory.
At the next cold boot, the files previously saved in the \Backup\Windows directory will
be restored to the Windows directory (see par. 3.9).
Safe Setup: with this button, the installation of software programs will be saved to
non-volatile memory (Backup directory). Before doing this, it will be checked that the
Backup directory has enough space to save the files. If the directory space is not
enough, an error message will be shown and the program will exit the Safe Setup
function.
37
3
DATALOGIC SKORPIO™/ SKORPIO-GUN™
Two activating procedures are available for Safe Setup:
-
Select an installation file (for example, a .CAB cabinet file) from the Safe Setup
mask.
Safe Setup First Mask
Then select \Windows or a relevant sub-directory in the path box. Then, Safe
Setup will recognize the new files and directories present in the \Windows
directory, and will copy them to the \Backup\Windows directory. At the next cold
boot, these files will be restored (see par. 3.9).
-
Simply skip the first mask either by closing it or by pressing the ESC key. When
it closes, a new mask will pop up: it will enable any type of installation (even
®
remote ones like ActiveSync installations). Make sure the installation directory
is \Windows or one of its sub-directories. After installation, tap OK: Safe Setup
will save the new files in the \Backup\Windows directory.
Safe Setup Second Mask
38
USE AND FUNCTIONING
3.7.4
3
Wireless Communications
The WIRELESS COMMUNICATIONS applet provides management of the Wi-Fi
®
Card and of the Bluetooth module.
Select the WIRELESS COMMUNICATIONS applet by double tapping the Wireless
Communications icon. The following window will appear:
Wireless Communications Window
39
DATALOGIC SKORPIO™/ SKORPIO-GUN™
3
3.7.5
Ethernet Settings
Datalogic Skorpio™ can be connected to an Ethernet network by inserting it into the
Datalogic Skorpio™ Ethernet Multi Cradle.
NOTE
Ethernet communication requires Datalogic Skorpio™ SW version
5.41 or later. Verify the software version by tapping on Software –
Version in the Datalogic default home page. Otherwise, search for
the file version.htm under the Windows folder.
When correctly inserted into the Ethernet Multi Cradle, the Ethernet driver installed
on the mobile computer will automatically run, and using the DHCP service, will
dynamically assign the IP Address.
1.
From the Datalogic Skorpio™ open Internet Explorer>Internet Options and
check use LAN no autodial then OK.
2.
From the Datalogic Skorpio™ > Explorer, enter the IP address or the PC
name in the address bar. You may be required to enter your network
username and password. The LAN connection will take place and you will
be able to see the PC shared folders and exchange files.
If your network provides Internet Service and does not use a proxy server you can
directly access the Internet. Otherwise set the internet proxy parameters according to
your network settings.
40
USE AND FUNCTIONING
3
The LAN icon will appear on the Taskbar indicating the LAN connection status.
By double tapping on the LAN icon in the
Taskbar, the LANNDS1 applet allows
visualizing the TCP/IP information. Other
information such as the MAC Address is
available by tapping the Details... button.
If it is necessary to set static TCP/IP
parameters, you must open the
LANNDS1 applet from the Network and
Dial-up Connections applet in the
Control Panel. This applet is only visible
when the mobile computer is correctly
inserted into the Ethernet Multi Cradle.
LAN icon
Ethernet LANNDS1 Communications Window
The IP Address belongs to Datalogic Skorpio™ while the MAC address is specific to
each cradle slot.
41
DATALOGIC SKORPIO™/ SKORPIO-GUN™
3
3.7.6
Stylus Calibration
You might need to recalibrate the touch screen (i.e. when you attempt to select one
item with the stylus, another item is erroneously selected).
To recalibrate the touch screen, complete the following steps:
1. Select Start > Settings > Control Panel > Stylus to open the Stylus
Properties dialog as shown in Figure 1.
2. Adjust Double-Tap sensitivity if needed or desired.
3. Select the Calibration tab to open the Calibration application.
Figure 1
4.
5.
6.
7.
42
Tap Recalibrate to open the Calibration screen shown in Figure 2.
Carefully press and briefly hold stylus on the center of the target. Repeat as the
target moves around the screen. Press the <ESC> key to cancel the stylus
calibration.
Press the <ENTER> key or tap the screen to accept the new calibration settings.
Press the <ESC> key to keep the old settings.
New calibration settings are persistently saved in registry.
USE AND FUNCTIONING
3
Figure 2
Startup stylus calibration
When starting the terminal, a stylus calibration screen comes up if valid calibration
settings are not available. This happens in the following circumstances:
1.
2.
3.
4.
At the first startup of the terminal.
After restoring registry default settings using the applet Registry Admin and
performing a warm boot.
After a Clean Boot.
After a Firmware Update (see par.3.10).
43
DATALOGIC SKORPIO™/ SKORPIO-GUN™
3
3.8
WINDOWS CONNECTIONS
To connect Datalogic Skorpio™ to another device (i.e. Host PC) from Windows,
several programs are available. These programs require specific electrical
connections in order to function properly.
3.8.1
Microsoft® ActiveSync®
Microsoft® ActiveSync® gives you the possibility to connect your desktop computer to
your Datalogic Skorpio™ and synchronize the information on them. Synchronization
compares the data on the Datalogic Skorpio™ with that on the desktop computer and
updates both computers with the most recent information.
®
With ActiveSync , it is possible to:
- Back up and restore Datalogic Skorpio™ data.
- Copy files between Datalogic Skorpio™ and desktop computer.
- Synchronize files by selecting a synchronization mode.
You can establish an ActiveSync® connection to your Datalogic Skorpio™ through
the following electrical interfaces:
-
USB either directly or through the Datalogic Skorpio™ Single USB Cradle.
-
Bluetooth® (see par. 3.8.3).
If uploading/downloading files through an RS232 serial connection,
®
®
Microsoft ActiveSync is not used. Refer to par. 3.8.2 for details.
NOTE
It is possible to constantly synchronize while connected to a desktop computer or,
alternatively, synchronization can be performed only when the synchronize command
is chosen. You can select which information types are synchronized and control how
much data is synchronized.
NOTE
44
By default, ActiveSync® does not automatically synchronize all types
®
of information. Use ActiveSync options to turn synchronization on
and off for specific information types.
USE AND FUNCTIONING
3
For example:
Synchronize Microsoft Word and Microsoft Excel files between the Datalogic
Skorpio™ and the desktop computer. The files will automatically be converted to the
correct format.
NOTE
Visit the following Microsoft Web site for the latest in updates, technical
information, and samples:
http://www.microsoft.com/windowsmobile/resources/downloads
ActiveSync® Remote
NOTE
Microsoft® ActiveSync® Remote is no longer supported in Windows
CE. For backward compatibility you can download it from the internet.
We suggest enabling the FTP Server and connecting to an FTP Client.
See par. 3.8.4.
45
DATALOGIC SKORPIO™/ SKORPIO-GUN™
3
3.8.2
Uploading/Downloading
Connection
Files
through
an
RS232
Files can be uploaded/downloaded through the device cradle connected via an
RS232 cable.
Before performing this operation, it is first necessary to define the PC and the mobile
computer settings and connection.
If uploading/downloading files through a serial connection, Microsoft®
®
ActiveSync is not used.
NOTE
1 - PC Settings
Follow the procedure to install the modem and define the connection settings:
a) Select Start ->Settings ->Control Panel and run the “Phone and Modem” options;
choose the “Modem” tab and press the “Add” button to make the “Add Hardware
Wizard” window appear;
b) From the “Add Hardware Wizard” window choose “Don’t detect my modem” and
press the “Next” button. Then, choose “Standard Modem” from the
“Manufacturer” list, and “Communications cables between two computers” from
the “Models” list. Select the COM port to be used for connection and press the
“Next” button. Now the modem is available on the installed modem list.
c) From the same (“Add Hardware Wizard”) window select the installed modem
and press the “Properties” button to open a further window where selecting the
“Modem” tab and changing the “Maximum port speed” to 115200. Then, press
the “Ok” button and close all windows to return to Control Panel.
d) From Control Panel choose “Network Connections” to open the related “New
Connection Wizard” window. From this window press the “Next” button, choose
“Set Up an advanced Connection” and press “Next” again. Then, choose “Accept
Incoming Connections”, press “Next”, choose “Communications cables between
two computers” and press “Next” again. Choose if VPN connections are allowed
and press “Next”. Then, it is necessary to select one or more users which can
access the computer or eventually insert a new one through the “Add” button.
Then press “Next” twice to complete the connection.
2 - Mobile Computer Settings
Follow the procedure to define the connection settings:
a) From the device desktop activate “Control Panel”, then “Network and Dial-up
connections” and choose “Make New Connection”. From this window type your
46
USE AND FUNCTIONING
3
connection name, select “Direct Connection” and press “Next”. From the device
list select “Serial cable on COM1” and change the communication speed under
“Configure” to 115200 baud. Then, press “Security Settings” and select the
“Preview user name and password” flag. Press “Finish” to save the configuration
and close all windows.
3 –PC Connection
Follow the procedure to start the connection from the PC side:
a) Connect the device cradle to the PC through a serial cable (refer to the cradle
Instruction Manual);
b) Share the desired directories as if working in a typical network connection.
4 –Mobile Computer Connection
Follow the procedure to start the connection from the mobile computer side:
a) Insert the mobile computer into the cradle.
b) Activate “Control Panel”->“Network and Dial-up connections”->“<your connection
name>”. Within the “Enter Network Password” window insert user name and
password (among those allowed in step d) of the PC Settings procedure) and
press the “Ok” button. If the connection succeeds, the “Connected” message will
appear within the “<your connection name>Status” window.
c) Activate “My Device”; then, select “Address Bar” from the “View” menu, insert
\\<host name> and press “Enter” from the keyboard. Insert user name, password
and host domain within the new window.
Now, the directory list will display those directories previously shared by the PC. All
directories can be managed as if working in a typical LAN connection.
47
3
3.8.3
DATALOGIC SKORPIO™/ SKORPIO-GUN™
Bluetooth® Manager Device Setup
In order to enable a Bluetooth® device for communication with the Datalogic
Skorpio™ you must perform the discovery procedure and enable the device as
follows:
1.
Place the Bluetooth® device within the range of the Datalogic Skorpio™ (10
meters).
2.
From the “Control Panel” main window double tap on the “Bluetooth” applet to
open the Bluetooth® Manager Device window:
3.
Tap on the “Me” button to enter the related window; then, tap on the “ON” button
®
to activate the Bluetooth module. The module activation may be also performed
by using the WIRELESS COMMUNICATION applet as described in par. 3.7.4.
48
USE AND FUNCTIONING
3
By tapping on the “HW Details” and “SW Details” buttons, information about the
®
mobile computer Bluetooth hardware and software will be displayed, while the
®
“Enable Encryption” button starts encryption of the Bluetooth communication
®
data. If tapping on the “Close” button the Bluetooth Manager Device window will
be closed.
4.
Tap on the “Discovery” button to enter the related window; then, tap on the
“Scan” button to run the Discovery procedure:
Once the Discovery procedure has been completed, select the desired
®
Bluetooth device from the list. It is also possible to digit (12 hexadecimal digits)
®
the Bluetooth address of the desired device by tapping on the “Add” button. The
“Clear” button deletes all discovered devices from the list.
49
3
5.
DATALOGIC SKORPIO™/ SKORPIO-GUN™
Once the desired Bluetooth® device has been selected, tap on the “Connection
Wizard” button to enter the related window where selecting the connection type
®
to be used for communication with the Bluetooth device:
®
The “Serial Port” button starts communication through the Bluetooth serial port
COM 5.
®
The “Printer” button starts communication with a printer through the Bluetooth
serial port COM 5.
The “Kbd Emulation” button allows connection with a barcode reader using the
keyboard emulation.
The “ActiveSync” button starts communication with a PC equipped with a
Bluetooth® antenna and the related ActiveSync.
6.
50
®
icon
Hide the Bluetooth Manager Device window by tapping on the
available on each window or close it through the “Close” button available in the
“Me” window (see step 3 of this procedure).
USE AND FUNCTIONING
3.8.4
3
FTP Server Setup
The Datalogic Skorpio™ Operating System includes a sample File Transfer Protocol
(FTP) server. FTP is used for copying files to and from remote computer systems
over a network using TCP/IP. You can establish a connection to your Datalogic
Skorpio™ using its FTP Server through the following interfaces:
WLAN using the WiFi radio
LAN through the Datalogic Skorpio™ Ethernet Multi Cradle (see par. 3.7.5)
Proceed as follows:
1.
Create a registry file (extension .reg) to setup and enable FTP Server
communication. A simple example file for anonymous logon is given below:
REGEDIT4
[HKEY_LOCAL_MACHINE\Comm\FTPD]
"DefaultDir"="\\"
"AllowAnonymousUpload"=dword:00000001
"UseAuthentication"=dword:00000000
"BaseDir"="\\"
"IsEnabled"=dword:00000001
"LogSize"=dword:00001000
"DebugOutputMask"=dword:00000017
"DebugOutputChannels"=dword:00000002
"IdleTimeout"=dword:0000012c
"AllowAnonymous"=dword:00000001
"AllowAnonymousVroots"=dword:00000001
3.
Copy this file to the Datalogic Skorpio™ using ActiveSync® or the RS232
protocol (par. 3.8.2).
Launch the .reg file from the Datalogic Skorpio™.
4.
Perform a warm boot on the Datalogic Skorpio™.
5.
From the PC > Explorer address bar (or running an FTP Client from the PC),
enter the Datalogic Skorpio™ IP address.
2.
NOTE
For more information on FTP Client/Server connections refer to the
following web page:
http://msdn2.microsoft.com/en-us/library/aa922316.aspx.
51
3
NOTE
52
DATALOGIC SKORPIO™/ SKORPIO-GUN™
Datalogic Skorpio™ Wi-FI models only (without Bluetooth®) do not
contain the FTP Server. If necessary you can install it from the CDROM in the Utilities folder.
USE AND FUNCTIONING
3.9
3
BACKUP DIRECTORY FILE MANAGEMENT
All of the Windows CE system files reside in RAM (volatile memory) except for the
Backup directory, which resides in FLASH (non-volatile memory). Therefore the
contents of the Backup directory are persistent even if the mobile computer is rebooted or the battery pack is changed.
You can save your more important files that you don't want to lose due to mobile
computer re-boot, in the Backup directory or create a sub-directory within Backup.
Even though the Windows Directory resides in RAM, it often contains files or subdirectories created by the user or by installation programs that you don't want to lose
at re-boot. To keep these files persistent it is necessary to copy them to the directory
\Backup\Windows. This directory doesn't exist originally (only Backup exists), and
therefore it must be created. At the next cold boot, before activating the shell,
Windows CE will copy the contents including all sub-directories of \Backup\Windows
to \Windows.
Likewise, to maintain files that must be run at Windows CE startup, (i.e. .exe, .lnk,
.vb, .htm, etc.), it is necessary to copy them to the directory \Backup\Startup. This
directory does not exist originally (only Backup exists), and therefore it must be
created. The application programs will be run after any type of re-boot (both warm
and cold boot).
As an alternative to the Safe Setup function, it is possible to copy the .cab files to the
directory \Backup\Cabfiles (the Cabfiles sub-directory doesn't exists originally and
must therefore be created) and perform a mobile computer cold boot to have the
application installed. Once these files are copied to the directory \Backup\Cabfiles,
the application will be run after each re-boot.
From the second cold boot on, a message may be displayed such as "<application
name> is already installed. Re-install?". This message blocks the boot process.
Press the [Enter] key to continue the system initialization.
53
DATALOGIC SKORPIO™/ SKORPIO-GUN™
3
3.10 FIRMWARE UPDATE
The Datalogic Skorpio™ is equipped with a tool that implements a firmware update
service.
This tool, called Datalogic Updater (DLUpdater), is compatible with all hardware
versions of the following WindowsCE 5.0 models:
Datalogic Skorpio™;
Datalogic Jet™;
Datalogic Kyman™;
Datalogic Memor™.
The DLUpdater, that is automatically invoked at startup, search for a potential update
file (DLUpdate.bin) in the storage card. If it finds it, it proceeds to update only the
components that are damaged or not updated. An update can be explicitly invoked
by running the application DLUpdater.exe, provided together with the update file.
The update must be contained in folder “\Storage Card”.
It is advisable, even if not binding, to connect the terminal to an
external power source before starting the update process. This
prevents the terminal from turning off while running and avoids a
corruption of flash content.
CAUTION
CAUTION
After the update process, all the data stored in the backup folder
could be irreparably lost, as well as the device configuration (even
that one stored in persistent memory). Therefore, before starting a
firmware update it is advisable to run a backup copy of the data you
want to preserve on SD Card or on PC (e.g. using ActiveSync).
Retrieving a Firmware Image Update
The following instructions use Internet Explorer to retrieve the most current firmware
image.
1.
2.
3.
4.
5.
54
Launch Internet Explorer on your PC and navigate to www.mobile.datalogic.com.
Navigate the Downloads section of the web site.
Select the product, desired language, and software updates. Click Go!
Select the file you want to download, then click Save and navigate to the location
where you want to save the firmware files.
Click Save again to begin copying the files to your local machine (or local
network location).
USE AND FUNCTIONING
3
Firmware Update Procedure
1.
Download the update from the web site (see previous par.). It is a zip file
containing the files:
•
DLUpdater.exe – that starts the update;
•
DLUpdate.bin – binary file containing the updated firmware;
2.
Copy the files DLUpdater.exe (optional) and DLUpdate.bin on a Mini SD card.
3.
Insert the Mini SD card in the terminal slot (see par.1.4).
4.
Open the folder “\Storage Card” on the terminal and run DLUpdater.exe
(double tap the icon). As an alternative, you can also perform a reboot of the
terminal (warm or cold).
5.
The message shown in figure 1 will come up on the screen. It informs that
DLUpdater found a firmware update in “\Storage Card\DLUpdate.bin”. It also
warns the user that by proceeding with the terminal firmware upgrade all data
and configurations (registry) may be lost. Select <YES> to continue, <NO> to
cancel operations.
6.
DLUpdater detects whether an external power source is present. If not, a
warning will come up on the screen asking for a confirmation before carrying on
(see figure 2).
Figure 1
7.
Figure 2
DLUpdater performs all the necessary operations of check, update and verify
and, if no errors occur during the update, terminates the running invoking a cold
boot of the terminal, so that the update process could be completed.
55
3
8.
DATALOGIC SKORPIO™/ SKORPIO-GUN™
Following the operating system upgrade, the message shown in figure 3 may
come up at the terminal startup. It informs the user that a flash disk formatting
(folder \backup) would required for a clean update and asks whether to proceed
with this operation. Select <YES> to format the flash disk. Select <NO> to
preserve the current data stored in the backup folder. Sometimes the update
process may force a flash format. In these cases the data stored in the backup
folder will be irreparably lost. It is therefore recommended to run a backup of the
data you want to preserve before starting a firmware update.
Figure 3
56
MAINTENANCE
4
4
MAINTENANCE
Rechargeable battery packs are not initially charged. Therefore the
first operation to perform is to charge them. See below.
NOTE
4.1
CHARGING THE BATTERY PACK
The battery pack autonomy varies according to factors, such as the frequency of
barcode scanning, RF usage, etc.
When the battery pack is low, the LED positioned at the right side of the display
blinks red.
It is possible to recharge the battery pack by using the PG5-20 MiniUSB AC/DC
Power Supply directly connected to the Datalogic Skorpio™.
Alternatively, it is also possible to recharge the battery pack by using the
Datalogic Skorpio™ Single USB Cradle or one of the Datalogic Skorpio™/F-COLOR
cradles (even when not connected to the host).
During the charging process the LED positioned at the right side of the display is red
constant. Once the charging process has been completed this LED is green constant
(see par. 3.5).
If the battery pack is removed from the mobile computer, it can be recharged by
inserting it into the MBC8600 Multi-Battery Charger.
NOTE
CAUTION
The battery pack autonomy varies according to many factors, such as
the frequency of barcode scanning, RF usage, battery life, storage,
environmental conditions, etc.
If the battery pack is new or has not been recharged for a long time,
it is necessary to perform two or three charging and discharging
cycles (complete use) before it can reach its maximum charge
capability.
The maximum time required to recharge a completely run-down
battery pack is 4 hours if recharged into the mobile computer.
57
4
NOTE
58
DATALOGIC SKORPIO™/ SKORPIO-GUN™
Even if the storage temperature range is wider, In order to achieve
the longest battery life, store the terminal and the spare batteries
between 20 to 30 ºC (68 to 86 ºF).
The Batteries must be charged at a temperature ranging from 0° to
+45 °C (+32° to +113 °F).
MAINTENANCE
4.2
4
REPLACING THE BATTERY PACK
4.2.1
Datalogic Skorpio™ Models
To correctly replace the battery pack, proceed as follows.
1.
Turn off the Datalogic Skorpio™.
2.
Turn the battery lock screw to the open position (horizontal), then pull the lock
runner up, as indicated in the figure below.
3.
Remove the battery pack.
Battery Contacts
59
DATALOGIC SKORPIO™/ SKORPIO-GUN™
4
4.
To correctly insert the new battery pack, first insert the bottom and then the
upper part of the battery pack into the slot as indicated in the following figure:
5.
Press it until the battery latch is automatically closed.
4.2.2
Datalogic Skorpio-GUN™ Models
To correctly replace the battery pack, proceed as follows.
1.
Turn off the Datalogic Skorpio-GUN™.
2.
Remove the battery pack, by pulling the battery latch down.
60
MAINTENANCE
4
Battery Contacts
3.
To correctly insert the new battery pack, first insert the bottom and then the
upper part of the battery pack into the slot as indicated in the following figure:
4.
Press it until the battery latch is automatically closed.
61
4
DATALOGIC SKORPIO™/ SKORPIO-GUN™
Use only a Datalogic Mobile approved power supply. Use of an
alternative power supply will void the product warranty and may cause
product damage. Do not apply voltages to the batteries contacts.
WARNING
Risk of explosion if the battery is replaced by an incorrect type.
Do not use the batteries of this terminal to power devices different from
this mobile computer.
Do not place the battery in or near a fire or heat as they may explode.
Do not place the battery in direct sunlight, or use or store the battery
inside unventilated areas in hot weather. Doing so may cause the
battery to generate heat, explode or ignite. Using the battery in this
manner may also result in a loss of performance and a shortened life
expectancy.
Do not place the battery in microwave ovens, high pressure containers,
or on induction cookware.
Immediately discontinue use of battery if, while using, charging or
storing the battery, the battery emits an unusual smell, feels hot,
changes colour or shape, or appears abnormal in any other way.
Do not short-circuit the battery contacts. Accidental short-circuiting can
occur when a metallic object such as a coin, clip, or pen causes direct
connection of the contacts of the battery (these look like metal strips on
the battery).
Do not carry or store battery pack together with metal objects (this might
happen, for example, when you carry a spare battery in your pocket or
purse). Short-circuiting the terminals may damage the battery or the
connecting object.
Do not pierce the battery pack with nails, strike it with a hammer, step
on it or otherwise subject it to strong impacts or shocks.
Do not solder directly onto the battery pack.
Do not disassemble or modify the battery. The battery contains safety
and protection devices, which, if damaged, may cause the battery to
generate heat, explode or ignite.
Do not expose the battery pack to liquids.
62
MAINTENANCE
NOTE
4
In order to guarantee an adequate operating autonomy, when
replacing the battery pack the mobile computer checks the battery
energy level. If the battery is not sufficiently charged, Datalogic
Skorpio™ does not turn on (when pressing the ON button).
In this case, either substitute the battery pack with a charged one
(sufficiently charged) or insert Datalogic Skorpio™ into a powered
cradle or plug it into the direct power supply.
Due to a large internal capacitor, Datalogic Skorpio™ can remain
on for about two minutes with no loss of data in the volatile memory,
for example when replacing the battery pack.
NOTE
To achieve the best battery life, turn off the radios not in use.
NOTE
63
DATALOGIC SKORPIO™/ SKORPIO-GUN™
4
4.3
COMPACT FLASH AND SECURE STORAGE CARDS
The Datalogic Skorpio™ supports both Compact Flash and Mini Secure Digital
storage cards.
The Mini SD storage card slot accepts storage cards only, while the Compact Flash
card slot accepts either a storage card or the 802.11b/g radio card.
To install a Compact Flash, it is recommended to contact a Datalogic representative
for technical assistance since to access the card slot it is necessary to open the
mobile computer by removing its screws and causes warranty loss.
The Mini Secure Digital storage card can be installed by removing the battery,
without opening the mobile computer see par. 1.4.
Opening the Datalogic Skorpio™ may damage internal components.
CAUTION
4.4
CLEANING THE MOBILE COMPUTER
Periodically clean the Datalogic Skorpio™ with a slightly dampened cloth.
Do not use alcohol, corrosive products or solvents.
64
TECHNICAL FEATURES
5
TECHNICAL FEATURES
5.1
TECHNICAL DATA
Electrical Features
Power
DC supply
Battery pack
Communication Features
Bluetooth interface
Serial interface
Wireless Features
WLAN
WPAN
Hardware Features
FLASH
RAM
Microprocessor
Audio
LED
Display
Keyboard
*
5
5.25 V ± 6%
2 cell Li-Ion 2100 mAh@ 3.7 V (7.8 Watt-hours)
Windows CE COM Port
COM5
RS232
COM1
USB 1.1
COM6
IEEE 802.11b/g (WiFi)
Bluetooth® IEEE 802.15, Class 2, Version 1.2
128 MB
128 MB
Intel X-Scale PXA-270 @ 312/520 MHz *
Speaker, Microphone
Two-color Good Read/Programmable LED
Charging Status (two-color LED)
65K Color TFT LCD, 2.8”, 320 x 240 pixel resolution
(QVGA), with LED backlight and touch screen,
transflective lighting, antiglare and antiscratch
protection
38 Rubber Keys
Depending on models.
65
5
Environmental Features
Working temperature**
Storage temperature
Humidity***
Protection
ESD protection
Drop resistance****
Mechanical Features
Dimensions (LxWxH)
DATALOGIC SKORPIO™/ SKORPIO-GUN™
-10° to + 50 °C / 14° to +122 °F
-20° to +70 °C / -4° to +158 °F
90% non condensing for temperatures<40°C
IP64
4 KV contact discharge, 8 KV air discharge
1.5 m / 5 ft
Datalogic Skorpio™ only: 19.6 x 7.7 x 3.3 cm / 7.7 x
3.0 x 1.3 in
Datalogic Skorpio-GUN™ only: 19.6 x 7.7 x 15.8 cm
/ 7.7 x 3.0 x 6.2 in
Weight (depending on model) Datalogic Skorpio™ only: 310 - 360 g / 10.9 - 12.7
oz (incl. battery)
Datalogic Skorpio-GUN™ only: about 560 g / 19.7
oz (incl. battery)
**
Close to the limits of the working temperature, some display and/or battery performance
degradation may occur.
*** Multiple rapid humidity and/or temperature variations may cause condensing.
**** Multiple drops can permanently damage the device.
Programming Features
Operating system*
Laser Models
Decoded barcodes 1D
Laser Optical Features
Maximum resolution
Skew angle
Pitch angle
Scan rate - bidirectional
Light source laser scanner
Safety class
*
66
Depending on models.
Windows CE 5.0 Core/Professional
UPC A, UPC E, EAN 8, EAN 13, Code 39, Code 39
Full ASCII, Code 32, Interleaved 2 of 5, Industrial 2 of
5, Matrix 2 of 5, Code 128, EAN 128, Codabar, MSI,
Plessey, Code 93, Code 11
7XX-9XX/ 5XX-9XX
0.10 mm / 4 mils
7XX-2XX
0.25 mm / 10 mils
± 50°
± 65°
104 ± 12 scan/sec
35 ± 5 scan/sec
VLD, wavelength in the range 630 to 680 nm
Class II EN 60825-1/CDRH
TECHNICAL FEATURES
5.2
5
READING DIAGRAMS
Datalogic Skorpio™ and Datalogic Skorpio-GUN™ XXX-9XX
Guaranteed Reading Diagram at 47° - Reading Zones (10° skew angle)
0,25 mm
(10 mils)
400
1,4 mm
(55 mils)
1,00 mm
(40 mils)
0,38 mm
(15 mils)
0,19 mm
(7,5 mils)
300
200
0,50 mm
(20 mils)
0,33 mm
(13 mils)
0,13 mm
(5 mils)
100
0
100
200
300
400
mm
0
100
200
300
400
500
600
700
800
900
1000 1100 1200
mm
67
DATALOGIC SKORPIO™/ SKORPIO-GUN™
5
Datalogic Skorpio-GUN™ XXX-2XX only
Guaranteed Reading Diagram - Reading Zones (10° skew angle)
1,00 mm
(40 mils)
0,50 mm
(20 mils)
400
0,38 mm
(15 mils)
0,25 mm
(10 mils)
300
1,4 mm
(55 mils)
200
100
0
100
200
300
400
mm
0
68
200
400
600
800
1000
1200
1400
1600
1800
2000
2200 mm
TEST CODES
6
6
TEST CODES
High Density Codes
0.25 mm (10 mils)
Code 39
!17162H!
17162
2/5 Interleaved
Code 128
Ë"8NduÌ
0123456784
ÌtestwÎ
test
80%
EAN 13
x(0B2DE5*KKKKLM(
80%
EAN 8
(6450*TRMN(
69
DATALOGIC SKORPIO™/ SKORPIO-GUN™
6
Medium Density Codes
0.38 mm (15 mils)
Code 39
Interleaved 2/5
!17162H!
17162
Ë"8NduÌ
0123456784
Code 128
ÌtestwÎ
test
100%
EAN 13
x(0B2DE5*KKKKLM(
100%
EAN 8
(6450*TRMN(
70
TEST CODES
6
Low Density Codes
0.50 mm (20 mils)
Code 39
!17162H!
17162
Interleaved 2/5
Ë"8NduÌ
0123456784
Code 128
ÌtestwÎ
test
120%
EAN 13
x(0B2DE5*KKKKLM(
120%
EAN 8
(6450*TRMN(
71
GLOSSARY
Access Point
A device that provides transparent access between Ethernet wired networks and
IEEE 802.11 interoperable radio-equipped mobile units. Hand-held mobile
computers, PDAs or other devices equipped with radio cards, communicate with
wired networks using Access Points (AP). The mobile unit (mobile computer) may
roam among the APs in the same subnet while maintaining a continuous, seamless
connection to the wired network.
Barcode
A pattern of variable-width bars and spaces which represents numeric or
alphanumeric data in binary form. The general format of a barcode symbol consists
of a leading margin, start character, data or message character, check character (if
any), stop character, and trailing margin. Within this framework, each recognizable
symbology uses its own unique format.
Baud Rate
A measure for data transmission speed.
Bit
Binary digit. One bit is the basic unit of binary information. Generally, eight
consecutive bits compose one byte of data. The pattern of 0 and 1 values within the
byte determines its meaning.
Bluetooth®
A standard radio technology using a proprietary protocol. The onboard Bluetooth
module in the mobile computer is compatible with the 1.2 protocol.
Byte
On an addressable boundary, eight adjacent binary digits (0 and 1) combined in a
pattern to represent a specific character or numeric value. Bits are numbered from
the right, 0 through 7, with bit 0 the low-order bit. One byte in memory can be used to
store one ASCII character.
Decode
To recognize a bar code symbology (e.g., Codabar, Code 128, Code 3 of 9,
UPC/EAN, etc.) and analyze the content of the bar code scanned.
72
DHCP
Dynamic Host Configuration Protocol. A set of rules used by a device (such as a
computer, router or networking adapter) to request and obtain an Internet address
from a server which has a list of addresses available for assignment.
EEPROM
Electrically Erasable Programmable Read-Only Memory. An on-board non-volatile
memory chip.
Flash Disk
Non-volatile memory for storing application and configuration files.
Host
A computer that serves other mobile computers in a network, providing services such
as network control, database access, special programs, supervisory programs, or
programming languages.
Liquid Crystal Display (LCD)
A display that uses liquid crystal sealed between two glass plates. The crystals are
excited by precise electrical charges, causing them to reflect light outside according
to their bias. They use little electricity and react relatively quickly. They require
external light to reflect their information to the user.
Light Emitting Diode (LED)
A low power electronic light source commonly used as an indicator light. It uses less
power than an incandescent light bulb but more than a Liquid Crystal Display (LCD).
RAM
Random Access Memory. Data in RAM can be accessed in random order, and
quickly written and read.
RF
Radio Frequency.
RTC
Real Time Clock.
73
INDEX
A
Accessories; 10
Available Models; 3
B
Backup Directory File Management;
53
Belt Clip; 7
Bluetooth Approval; viii
®
Bluetooth Manager Device Setup; 48
Buttons; 35
C
Capture; 34
Charging the Batteries; 57
Cleaning the Mobile Computer; 64
Compact Flash and Secure Storage
Cards; 64
Connections; 11
Connection to USB peripherals; 12
Ethernet Connection; 14
Modem Connection; 14
RS232 Connection; 13
USB Connection; 11
WLAN Connection; 15
WPAN Connections; 17
Control Panel; 35
D
Data Capture; 21
Laser Data Capture; 21
Data Capture Configuration; 29
Datalogic Skorpio™ Description; 1
Default Settings; 33
Description of the Keys; 22
E
End User License Agreement; v
Ethernet Cradle Settings; 40
74
F
FCC Compliance; xv
Files Admin; 37
Firmware Update; 54
FTP Server Setup; 51
G
General View; xviii
Glossary; 72
L
Laser Safety; ix
LED Class; xiii
LED Status; 27
M
Maintenance; 57
®
®
Microsoft ActiveSync ; 44
Mini SD card; 5
P
Package Contents; 3
Patents; xv
Power Supply; viii
R
Radio Compliance; xiii
Reader Parameters; 31
Reading Diagrams; 67
References; vii
Registry; 36
Replacing the Batteries; 59
Resetting the Skorpio; 25
S
Safe Setup; 37
Safety Regulations; viii
SAR Compliance; xv
Save Session; 37
Scan Parameters; 31
Services and Support; vii
Startup; 18
Status Indicators; 27
Stylus; 9
Stylus Calibration; 42
T
Taskbar; 28
Technical Data; 65
Technical Features; 65
Test Codes; 69
75
U
Uploading/Downloading Files through
an RS232 Connection; 46
Using the Stylus; 20
W
WEEE Compliance; xvi
Windows Connections; 44
Wireless Communication; 39
Wrist Strap; 9
Datalogic Mobile S.r.l.
Via S. Vitalino 13
40012 - Lippo di Calderara
Bologna - Italy
07
dichiara che
declares that the
déclare que le
bescheinigt, daß das Gerät
declare que el
Datalogic Skorpio XXX-YYY-ZZZ
e tutti i suoi modelli
and all its models
et tous ses modèles
und seine Modelle
y todos sus modelos
sono conformi alle Direttive del Consiglio Europeo sottoelencate:
are in conformity with the requirements of the European Council Directives listed below:
sont conformes aux spécifications de la Directives de l'Union Européenne ci-dessous:
der nachstehenden angeführten Direktiven des Europäischen Rats:
cumple con los requisitos de las Directivas del Consejo Europeo, según la lista siguiente:
1999/5/EEC R&TTE
Questa dichiarazione è basata sulla conformità dei prodotti alle norme seguenti:
This declaration is based upon compliance of the products to the following standards:
Cette déclaration repose sur la conformité des produits aux normes suivantes:
Diese Erklärung basiert darauf, daß das Produkt den folgenden Normen entspricht:
Esta declaración se basa en el cumplimiento de los productos con las siguientes normas:
ETSI EN 301 489-3 v1.4.1, August 2002:
ELECTROMAGNETIC
COMPATIBILITY AND
RADIO SPECTRUM MATTERS (ERM);
ELECTROMAGNETIC COMPATIBILTY (EMC) STANDARD FOR RADIO EQUIPMENT
AND SERVICES; PART 3: SPECIFIC CONDITIONS FOR SHORT-RANGE DEVICES
(SRD) OPERATING ON FREQUENCIES BETWEEN 9KHZ AND 40 GHZ
ETSI EN 301 489-17 v1.2.1, August 2002:
ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM);
ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT
AND SERVICES; PART 17: SPECIFIC CONDITIONS FOR 2,4GHZ WIDEBAND
TRANSMISSION SYSTEMS AND 5GHZ HIGH PERFORMANCE RLAN EQUIPMENT
ETSI EN 300 328 v1.6.1, November 2004:
ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM);
WIDEBAND TRANSMISSION SYSTEMS; DATA TRANSMISSION EQUIPMENT
OPERATING IN THE 2,4 GHZ ISM BAND AND USING WIDE BAND MODULATION
TECHNIQUES; HARMONIZED EN COVERING ESSENTIAL REQUIREMENTS UNDER
ARTICLE 3.2 OF THE R & TTE DIRECTIVE
ETSI EN 300 330-2 v1.1.1, June 2001:
ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM);
SHORT RANGE DEVICES (SRD); RADIO EQUIPMENT IN THE FREQUENCY RANGE
9 KHZ TO 25 MHZ AND INDUCTIVE LOOP SYSTEMS IN THE FREQUENCY RANGE 9
KHZ TO 30 MHZ; PART 2: HARMONIZED EN UNDER ARTICLE 3.2 OF THE
R&TTE DIRECTIVE
EN 60950-1, December 2001:
InFORMATION TECHNOLOGY EQUIPMENT – SAFETY –
PART 1: GENERAL REQUIREMENTS
Lippo di Calderara, March 9th, 2007
Paola Chientaroli
Quality Assurance Manager
Datalogic Mobile S.r.l.
Via S. Vitalino 13
40012 - Lippo di Calderara
Bologna - Italy
07
dichiara che
declares that the
déclare que le
bescheinigt, daß das Gerät
declare que el
Datalogic Skorpio G XXX-YYY-ZZZ
e tutti i suoi modelli
and all its models
et tous ses modèles
und seine Modelle
y todos sus modelos
sono conformi alle Direttive del Consiglio Europeo sottoelencate:
are in conformity with the requirements of the European Council Directives listed below:
sont conformes aux spécifications des Directives de l'Union Européenne ci-dessous:
der nachstehenden angeführten Direktiven des Europäischen Rats:
cumple con los requisitos de las Directivas del Consejo Europeo, según la lista siguiente:
1999/5/EEC R&TTE
Questa dichiarazione è basata sulla conformità dei prodotti alle norme seguenti:
This declaration is based upon compliance of the products to the following standards:
Cette déclaration repose sur la conformité des produits aux normes suivantes:
Diese Erklärung basiert darauf, daß das Produkt den folgenden Normen entspricht:
Esta declaración se basa en el cumplimiento de los productos con las siguientes normas:
ETSI EN 301 489-17 v1.2.1, August 2002:
ELECTROMAGNETIC
COMPATIBILITY AND
RADIO SPECTRUM MATTERS (ERM);
ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT
AND SERVICES; PART 17: SPECIFIC CONDITIONS FOR 2,4GHZ WIDEBAND
TRANSMISSION SYSTEMS AND 5GHZ HIGH PERFORMANCE RLAN EQUIPMENT
ETSI EN 300 328 v1.6.1, November 2004:
ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM);
WIDEBAND TRANSMISSION SYSTEMS; DATA TRANSMISSION EQUIPMENT
OPERATING IN THE 2,4 GHZ ISM BAND AND USING WIDE BAND MODULATION
TECHNIQUES; HARMONIZED EN COVERING ESSENTIAL REQUIREMENTS UNDER
ARTICLE 3.2 OF THE R & TTE DIRECTIVE
EN 60950-1, December 2001:
INFORMATION TECHNOLOGY
REQUIREMENTS
EQUIPMENT
– SAFETY – PART 1: GENERAL
Lippo di Calderara, March 9th, 2007
Paola Chientaroli
Quality Assurance Manager
Skorpio™/Skorpio-GUNTM
www.mobile.datalogic.com
World wide Sales Network
available from: www.mobile.datalogic.com/contacts
Datalogic Mobile S.r.l.
Via S. Vitalino, 13
40012 Lippo di Calderara di Reno
Bologna - Italy
Telephone: (+39) 051-3147011
Fax: (+39) 051-3147561
User’s Manual
©2008 Datalogic Mobile S.r.l.
822000686 (Rev. G)
07/08
Download PDF

advertising