TP-LINK TD-W8151N Owner Manual
Add to my manuals20 Pages
TP-LINK TD-W8151N is an all-in-one device that integrates the functions of a high-speed DSL modem, a 4-port switch, and a wireless access point. It is used to establish a wired or wireless network for sharing high-speed Internet access. With its advanced wireless features and exceptional performance, it is an ideal choice for users who demand a fast, reliable, and secure home network.
advertisement
Installation
Note
Please use only wired network connections to configure the Modem Router.
If you currently use a modem, disconnect it now - the Modem Router will replace your current modem.
Connect your computer to the
LAN port on the Modem
Router with an Ethernet cable.
Connect the splitter to the wall jack using a telephone line, then use the other telephone line to directly connect it to the
ADSL port on the Modem
Router and the MODEM port of the splitter, also have the
PHONE port of the splitter connected to a telephone.
Note
If no telephone is needed, please connect the ADSL port of the Modem
Router to the wall jack using the telephone line directly.
1
Plug the provided Power
Adapter into the Power jack on the back of the Modem
Router and the other end to a standard electrical wall socket.
Power on all your network devices and then check to see if the LEDs of the
Modem Router display normally as the diagram below describes.
POWER: Solid light
ADSL: Solid light or flashing
WLAN: Solid light or flashing
LAN: Solid light if the corresponding port is connected
Note
If the LEDs display abnormally, please check to see if all the cable connectors (power adapter, phone line and Ethernet cable) are well connected to your device. With the phone line well connected, if the
ADSL LED turns off after flashing, please contact your ISP to ensure that your Internet connection is active.
2
Note To configure the device, TP-LINK strongly recommends that Windows users run the setup CD, Mac OS\Linux\Windows\Android\iOS user who can not run the mini CD, please refer to Appendix to run the web-based Quick
Setup Wizard.
Insert the provided Resource
CD into your CD-ROM drive.
The Setup Wizard will automatically pop up on your computer’s screen.
Please select your product model and click Start Setup
3
Then the configuration wizard will pop up and show you how to connect your devices. After that, the Easy Setup Assistant will start.
Click NEXT, and then follow the step-by-step instructions until you complete the configuration
The configuration has now been completed. Please skip to Step 3 “Testing the
Internet Connection”.
The basic settings for your Modem Router are completed. Please open the web browser and try to log on to some popular websites to test your Internet connection, for example:
http://www.tp-link.com http://www.google.com
If the above websites can be accessed, it indicates that your Modem Router has been configured successfully and you can start to enjoy the Internet. If the websites cannot be accessed, please refer to “T4. What can I do if I cannot
access the Internet?” in the Troubleshooting guide.
Note
For the advanced configurations, please refer to the User Guide on the
Resource CD provided.
Note
The above configurations only need to be set once. If you want other computers in your LAN to access the Internet, please connect the desired computer to the Modem Router directly. If the additional computer can not access the Internet, please set that computer referring to “T3. What can I do if I cannot access the web-based configuration
page?” in the Troubleshooting guide.
4
Troubleshooting
T1. How do I restore my Modem Router’s configuration to its factory default settings?
With the Modem Router powered on, use a pin to press and hold the
RESET button on the rear panel for
8 to 10 seconds before releasing it.
Press it for 8 to 10 seconds
Note
Once the Modem Router is reset, the current configuration settings will be lost and you will need to re-configure the Modem Router.
T2. What can I do if I don’t know or forget my password?
1) Restore the Modem Router’s configuration to its factory default settings. If you don’t know how to do that, please refer to T1.
2) Use the default user name and password: admin, admin.
3) Try to configure your Modem Router once again by following the instructions in the previous steps of the QIG.
T3. What can I do if I cannot access the web-based configuration page?
1) Configure your computer’s IP Address.
5
For Windows 7 OS
Go to Start > Settings > Control
Panel, and then you will see the following page.
Click View network
status and tasks
Click Change adapter settings
Right-click Local
Area Connection
Click Properties
6
Double-click Internet Protocol
Version 4 (TCP/IPv4)
Select Obtain an IP
address automatically
Select Obtain DNS server
address automatically
Click OK
7
For Windows Vista OS
Go to Start > Settings > Control
Panel, and then you will see the following page.
Click View network
status and tasks
Click View status
Click Properties
8
Double-click Internet
Protocol Version 4
(TCP/IPv4)
Select Obtain an IP
address automatically
Select Obtain DNS server
address automatically
Click OK
9
错误!
For Windows XP OS
Go to Start > Control Panel, you will then see the following page.
Click Network and
Internet Connections
Click Network
Connections
Right-click Local
Area Connection
Click Properties
10
Double-click Internet
Protocol (TCP/IP)
Select Obtain an IP
address automatically
Select Obtain DNS server
address automatically
Click OK
11
Click OK
12
2) Configure your IE browser.
Open your IE browser, click
Tools tab and you will see the following screen.
Click Internet Options
Select Never dial
a connection
Click OK
Now, try to log on to the Web-based configuration page again after the above settings have been configured. If you still cannot access the configuration page, please restore your Modem Router’s factory default settings and reconfigure your Modem Router following the instructions of this QIG. Please feel free to contact our Technical Support if the problem still exists.
13
T4. What can I do if I cannot access the Internet?
1) Check to see if all the connectors are connected well, including the telephone line, Ethernet cables and power adapter.
2) Check to see if you can log on to the web management page of the Modem
Modem Router. If you can, try the following steps. If you cannot, please set your computer referring to T3 then try to see if you can access the Internet. If the problem persists, please go to the next step.
3) Consult your ISP and make sure all the VPI/VCI, Connection Type, account username and password are correct. If there are any mistakes, please correct the settings and try again.
4) If you still cannot access the Internet, please restore your Modem Router to its factory default settings and reconfigure your Modem Router by following the instructions of this QIG.
5) Please feel free to contact our Technical Support if the problem still exists.
Note
For more details about Troubleshooting and Technical Support contact information, please log on to our Technical Support Website:
http://www.tp-link.com/en/support
14
Appendix
Login
Open your web browser and type 192.168.1.1 in the address bar and press Enter
A dialog box will prompt you for the
User name and Password. Enter the default values and click OK.
User name: admin
Password: admin
Click OK
Note
If the dialog box does not pop up, please refer to T3 in the Troubleshooting guide and T2 will give you some help if you forget the password.
The web management page will display after a successful login.
Click Quick Start
15
Internet Parameters Configuration
This page will then display.
Click RUN WIZARD
Click NEXT
Select the appropriate Time
Zone for your location from the drop-down list.
Click NEXT
Choose the Connection Type given by your ISP.
If PPPoE/PPPoA is selected, please proceed to A;
If Dynamic IP is selected, please skip to B;
If Static IP is selected
,please skip to
C;
If Bridge Mode is selected, please skip to D.
Click NEXT
Note Bridge mode is not recommended because multiple computers are not permitted to share Internet access in this mode.
16
A. Configuration for PPPoE/PPPoA
This page will then display.
Enter the PPPoE/PPPoA information provided by your ISP.
Click NEXT
Note If you did not get the VPI, VCI and Connection Type information, please contact your ISP for this information.
B. Configuration for Dynamic IP
This page will then display.
Select the dynamic connection provided by your ISP.
Click NEXT
C. Configuration for Static IP
This page will then display.
Enter the Static IP information provided by your ISP manually.
Click NEXT
17
D. Configuration for Bridge Mode
This page will then display.
Enter the Bridge information provided by your ISP.
Click NEXT
After completing the above configuration, please proceed to
Configuration.
Wireless Settings Configuration
This page will then display.
Keep the default setting: Activated.
If you want to disable Access Point, please select Deactivated.
Create a unique and easy to remember name for your wireless network. You can also keep default settings without the device being affected.
Select an Authentication Type.
Select an Encryption.
Enter a Security Key using
8-64 characters.
Click NEXT
Wireless Settings
Note The wireless security is Disabled by default. You are suggested to select an
Authentication Type for security settings. WPA2-PSK is recommended.
After completing the above configuration, please proceed to Quick Start
Complete.
18
Quick Start Complete
To continue, the following page will then display.
Click NEXT
Click CLOSE
Now, your Modem Router has been configured and is rebooting. Please do not turn off the Modem Router while it’s rebooting.
19
Technical Support
For more troubleshooting help, go to:
http://www.tp-link.com/en/support/faq
To download the latest Firmware, Driver, Utility and User Guide, go to:
http://www.tp-link.com/en/support/download
For all other technical support, please contact us by using the following details:
Global
Tel: +86 755 26504400
E-mail: [email protected]
Service time: 24hrs, 7 days a week
UK
Tel: +44 (0) 845 147 0017
E-mail: [email protected]
Service time: 24hrs, 7 days a week
Turkey
Tel: 444 19 25 (Turkish Service)
E-mail: [email protected]
Service time: 9:00 AM to 9:00 PM
7 days a week
Ukraine
Tel: 0-800-505-508
E-mail: [email protected]
Service time: Monday to Friday
14:00 PM to 22:00 PM
Brazil
Toll Free: 0800-770-4337 (Portuguese
Service)
E-mail: [email protected]
Service time: Monday to Saturday
08:00 AM to 08:00 PM
France
Tel: +33 (0) 820 800 860 (French service)
Email: [email protected]
Fee: 0.118 EUR/min from France
Service time: Monday to Friday 9:00 AM to
6:00 PM (Except French Bank holidays)
Russian Federation
Tel: 8 (499) 754-55-60
8 (800) 250-55-60 (toll-free call from any RF region)
E-mail: [email protected]
Service time: From 10:00 to 18:00
(Moscow time)
*Except weekends and holidays in Russian
Federation
Switzerland
Tel: +41 (0) 848 800998 (German Service)
E-mail: [email protected]
Fee: 4-8 Rp/min, depending on rate of different time
Service time: Monday to Friday 9:00 AM to
6:00 PM. GMT+ 1 or GMT+ 2
(Daylight Saving Time)
Singapore
Tel: +65 62840493
E-mail: [email protected]
Service time: 24hrs, 7 days a week
USA/Canada
Toll Free: +1 866 225 8139
E-mail: [email protected]
Service time: 24hrs, 7 days a week
Australia & New Zealand
Tel: AU 1300 87 5465
NZ 0800 87 5465
E-mail: [email protected]
Service time: 24hrs, 7 days a week
Italy
Tel: +39 0230519020
E-mail: [email protected]
Service time: Monday to Friday
9:00 AM to1:00 PM, 2:00 PM to 6:00 PM
Indonesia
Tel: (+62) 021 6259 135
E-mail : [email protected]
Service time : Monday to Friday
9:00 -12:00; 13:00 -18:00
*Except public holidays
Malaysia
Tel: 1300 88 875465 (1300 88TPLINK)
Email: [email protected]
Service time: 24hrs, 7 days a week
Poland
Tel: +48 (0) 801 080 618 / +48 22
7217563 (if calls from mobile phone)
E-mail: [email protected]
Service time: Monday to Friday
9:00 AM to 5:00 PM. GMT+1 or GMT+2
(Daylight Saving Time)
Germany / Austria
Tel: +49 1805 875465 (German Service)
+49 1805 TPLINK
E-mail: [email protected]
Fee: 0.14 EUR/min from the German fixed phone network and up to 0.42
EUR/min from mobile phone
Service time: Monday to Friday 9:00 AM to 6:00 PM. GMT+ 1 or GMT+ 2
(Daylight Saving Time in Germany)
*Except bank holidays in Hesse
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- 802.11g 150 Mbit/s
- Fast Ethernet
- DSL WAN
- Ethernet LAN (RJ-45) ports: 1
- Web-based management