Dell 2T227 Power Supply User Manual

Dell 2T227 Power Supply User Manual
CROSS-TRAINER 93X-0XXX-01
Customer Support Services
PARTS MANUAL
rev 03 Sep 2010
CROSS TRAINER 93X
93X-0XXX-01
REFERENCES
S/N XTB100000
OPERATION MANUAL
M051-00K62-A026
SERVICE MANUAL
M051-00K62-A060
HARDWARE BAG
AK62-00152-0001
PLUG IN OPTION 120/60
GK62-00002-0018
PLUG IN OPTION 240/50 UK
GK62-00002-0019
PLUG IN OPTION 240v AUS
GK62-00002-0020
PLUG IN OPTION 230/50 CONT
GK62-00002-0021
C-SAFE KIT
GK63-00002-0003
2
CROSS TRAINER 93X
93X-0XXX-01
CONTENTS
S/N XTB100000
Page
CONSOLE SUPPORT & DEADSHAFT COVERS ............................................................ 4
HANDLEBARS AND BULLHORNS ................................................................................. 5
CONSOLE AND RELATE D COMPONENTS.................................................................... 6
UPPER FRAME HARDWARE .......................................................................................... 7
ROCKER ARMS AND PEDAL LEVERS .......................................................................... 8
CRANK COVER AND LOWER CAPS .............................................................................. 9
LOWER FRAME SHROUDS AND HARDWARE .............................................................. 10
PEDAL LEVER COMPONENTS ....................................................................................... 11
DRIVE MODULE COMPONENTS AND MAIN CABLE .................................................... 12
DRIVE MODULE HARDWARE ......................................................................................... 13
CABLES......................................................................................................................... ...14
Note: The 93X has Telemetry only.
3
CROSS TRAINER 93X
93X-0XXX-01
Console Support & Deadshaft Covers
S/N XTB100000
Right
Bullhorn Cover
0K62-01007-0001
Left
Bullhorn Cover
0K62-01008-0001
Console Support
AK62-00123-0000
Console Support Cap
0K62-01030-0000
Console Support
Shroud
0K62-01023-0000
Right Inside
Deadshaft Cover
0K62-01010-0000
Left Inside
Deadshaft Cover
0K62-01011-0000
2-Front Inside
Deadshaft Cover
0K62-01009-0000
2-Outside Rear
Deadshaft Cover
0K62-01013-0000
2-Outside Front
Deadshaft Cover
0K62-01012-0000
4
CROSS TRAINER 93X
93X-0XXX-01
Handlebars and Bullhorns
S/N XTB100000
*Right Bullhorn Assembly
AK62-00053-0000
Left Bullhorn Assembly
AK62-00054-0000
Bullhorn Insert
0017-00009-1191
Right Handlebar
AK62-00090-0000
Left Handlebar
AK62-00091-0000
*Right Bullhorn Assembly consists of: AK62-00057-0000 Bullhorn,
0K62-01136-0000 Grip and 0K62-01199-0000 Gasket
Left Bullhorn Assembly consists of: AK62-00058-0000 Bullhorn,
0K62-01136-0000 Grip and 0K62-01199-0000 Gasket
5
CROSS TRAINER 93X
93X-0XXX-01
Console & Related components
S/N XTB100000
Console Case Screws
0017-00101-1242
PCB Mounting Screws
0017-00101-1650
Programmed PCB
A084-92220-A008
Battery Door
0K62-01026-0000
Polar Ca ble
AK39-00063-0000
Console Case
with decal
AK62-00142-0000
Polar PCB
with Receiver
AK39-00064-0000
Overlay/Bezel/Switch
(see chart below)
CONSOLE
AK62-00150-0001
AK62-00150-0003
AK62-00150-0004
AK62-00150-0006
AK62-00150-0007
AK62-00150-0008
AK62-00150-0009
AK62-00150-0010
OVERLAY/BEZEL/SWITCH
AK62-00190-0001
AK62-00190-0003
AK62-00190-0004
AK62-00190-0006
AK62-00190-0007
AK62-00190-0008
AK62-00190-0009
AK62-00190-0010
6
LANGUAGE
Eng + Met
Ger/Met
Spn/Met
Jap/Met
Frn/Met
Ital/Met
Dut/Met
Port/Met
CROSS TRAINER 93X
93X-0XXX-01
Upper Frame Hardware
S/N XTB100000
4 - Console Mounting Screws
0017-00101-1796
6 - Console Support
Mounting Screws
0017-00101-1791
Console Support
Shroud Mounting
Screws
0017-00101-1796
Handlebar
Mounting Screws
0017-00101-1791
(3 per side)
Bullhorn Mounting Screws
(includes 4 screws)
GK62-00002-0042
Bullhorn Cover
Screws
0017-00101-1854
Inside Deadshaft
Cover Screws
0017-00101-1796
(2 per side)
Outside Deadshaft
Cover Screws
0017-00101-1796
( 2 per side )
Items Not Shown:
Accessory Tray
0K62-01022-0000
Mounting Screws (2)
0017-00101-1846
7
CROSS TRAINER 93X
93X-0XXX-01
Rocker Arms & Pedal Levers
contents:
Rocker Arms (2)
Hardened Spacers (2)
Oilite Washers (2)
Retaining Rings (2)
Loctite 620
Alcohol pad
LF Bug
Medallion Assy.
AK58-00245-0000
S/N XTB100000
Rocker Arms
AK62-00062-0001
Shaft Collar w/Screws
0K61-01259-0000
Right Pedal
Lever Assembly
AK62-00236-0000
Left Pedal Lever Assembly
AK62-00235-0000
8
CROSS TRAINER 93X
93X-0XXX-01
Crank Cover and Lower Caps
S/N XTB100000
Crank Cover
0K61-03100-0001
2 - Mounting screws
0017-00101-1837
Stabilizer Caps
4 - 0K62-01003-0000
Front frame Cap
0K62-01004-0000
Mounting Screws
(Located on front sides of Ladder Frame Cover)
2- 0017-00101-1795
9
CROSS TRAINER 93X
93X-0XXX-01
Lower Frame Shrouds & Hardware
S/N XTB100001
Right Link Cover w/Decal
AK62-00115-0000
Left Link Cover w/Decal
AK62-00116-0000
Mounting Screws
(6 per cover)
0017-00101-1796
Leg Levelers
AK62-00124-0000
Ladder Frame Cover w/Decal
AK62-00106-0000
Mounting Screws (4)
0017-00101-1795
Rocker Cover Kit
(left or right, includes
clip and mounting screw)
GK62-00002-0066
Mounting Screw
0017-00101-1796
Shroud Panel
0K62-01002-0002
Mounting Screws
(2 per side)
0017-00101-1795
Rear Shroud Assemb
AK62-00223-0000
Mounting Screws (4)
0017-00101-1796
Wheel/Bracket Assembly
AK62-00102-0000
Mounting Screws
(3 per assembly)
0017-00101-1789
“Left” and “Right” refer
to the orientation of a
user while standing on
the pedals, facing the
console.
Right Outside Rocker Cover
0K62-01037-0000
Right Inside Rocker Cover
0K62-01039-0000
Inside Lever Joint Cover
(left or right)
0K62-01035-0000
Mounting Screw
0017-00101-1836
Left Inside Rocker Cover
0K62-01040-0000
Left Outside Rocker Cover
0K62-01038-0000
10
CROSS TRAINER 93X
93X-0XXX-01
Pedal Lever Assembly Components
S/N XTB100000
Control Link Kit
GK62-00002-0071
(contains 2 control links,
part nos. AK62-00384-0000)
Right Inside
Pedal Cover
0K62-01015-0000
Left Inside
Pedal Cover
0K62-01016-0000
5 - Mounting screws
0017-00101-1796
Control Links (2)
AK62-00384-0000
Left Pedal
0K62-01005-0000
Right Pedal
0K62-01006-0000
Crank Extension
Mounting Bolt
0017-00101-1907
Hex nut
0017-00103-0333
Pedal Mounting Hardware
4 - Screw - 0017-00101-1805
4 - Washer-0017-00104-0469
Pedal/Rocker Shaft & Bearings
Order Kit GK62-00002-0001
E-Ring
0017-00100-0107
Thrust Washer
0K47-01105-0000
Brass Washer
0K47-01104-0000
Roller w/bearing
AK62-00196-0001
Shaft Collar
0K62-01065-0000
Washer
0017-00104-0474
Brass Washer
0K47-01104-0000
Anti-Lift Roller
0K62-01191-0000
Washer
0017-00104-0479
Nut
0017-00103-0333
Roller Extrusion
AK62-00197-0000
2 - Screws
0017-00101-1789
Anti-Lift Track
0K62-01193-0000
2 - Screws
0017-00101-1836
Note: If replacing the Tie Rod Assembly or
Crank Extension for the first time, order
kit GK62-00002-0015. Both sides must
be replaced simultaneously in this situation.
11
CROSS TRAINER 93X
93X-0XXX-01
Drive Module components & Cable
S/N XTB100000
Resistor with
harness assembly
AK62-00171-0000
Flexonic Belt J8
0K62-01134-0000
Power Control Board
B084-92218-D000
Metric Poly-V
pulley
0K35-01186-0007
Reed Switch
118E-00001-0140
Right Crankarm
AK62-00204-0000
Battery
0017-00003-0685
Flexonic Belt J10
0K62-01135-0000
Poly-V Crank Pulley
0K61-02409-0000
Left Crankarm
with plate weldment
and Bearings
Order Kit
GK62-00002-0003
Alternator
Flywheel Assembly
AK61-00250-0002
Magnet/Standoff
Assembly
AK62-00186-0000
Main Cable
Connects to
Power Control Board
(not shown)
AK62-00093-0000
Crankshaft Plate
0K61-02302-0001
Crossover Shaft
and Bearings
Order Kit GK62-00002-0002
12
CROSS TRAINER 93X
93X-0XXX-01
Drive Module Hardware
S/N XTB100000
Alternator mounting
bolt and nut
0017-00101-1793
0017-00103-0332
Alternator
mounting bolt
0017-00101-0986
Plastic Grommet (4)
0017-00042-0754
PCB Grommet (4)
0017-00042-0821
PCB Mounting
screws
0017-00101-1838
Magnet
mounting screw
0017-00101-1835
Resistor
mounting rod
0K63-01166-0000
Cable mounting
screws
0017-00101-1839
Cable mounting
nuts
0017-00103-0159
Crankshaft plate
mounting screws
0017-00101-1834
Reed Switch/cable
mounting screws
0017-00101-1794
Screw
0017-00101-1836
Washer
0017-00104-0465
Machine Key
0K53-01183-0000
Setscrews
0017-00101-2015
Thrust Washer
0K47-01104-0000
Battery
mounting screws
0017-00101-1797
Crankarm nut
0017-00103-0334
Crankarm mounting
bolt
0017-00101-1849
Retaining Ring
0017-00100-0107
UNLABELED PARTS
PART NO.
DESCRIPTION
BATTERY: 6V; 2.5AH
C
0017-00003-0685
CVR-ASSY: W/DCLS:FRM;FSCT;MFG S/C-D
AK62-00106-0000
MANUAL: OPER; 93X/90X;ENG +
M051-00K62-A111
13
Hex key
0K53-01122-0000
Setscrew
0017-00101-2015
CROSS TRAINER 93X
93X-0XXX-01
Cables
S/N XTB100000
Power Control Board
B084-92218-D000
Main Cable
AK62-00093-0000
Power Control Cable
AK62-00092-0000
Console PCB
A084-92220-A008
14
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement