Dell 660 Personal Computer User Manual

Dell™ Axim™ X5
User’s Guide
Model HC01U
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Notes, Notices, and Cautions
NOTE: A NOTE indicates important information that helps you make better
use of your computer.
NOTICE: A NOTICE indicates either potential damage to hardware or loss
of data and tells you how to avoid the problem.
CAUTION: A CAUTION indicates a potential for property
damage, personal injury, or death.
Abbreviations and Acronyms
For a complete list of abbreviations and acronyms, see "Glossary" on
page 163.
____________________
Information in this document is subject to change without notice.
© 2003 Dell Computer Corporation. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell Computer
Corporation is strictly forbidden.
Trademarks used in this text: Dell, the DELL logo, Axim, and DellNet are trademarks of Dell
Computer Corporation; Intel is a registered trademark and XScale and StrataFlash are trademarks
of Intel Corporation; Microsoft, Windows, and ActiveSync are registered trademarks of Microsoft
Corporation; EMC is a trademark of EMC Corporation; Bluetooth is a trademark owned by
Bluetooth SIG, Inc. and is used by Dell Computer Corporation under license.
Other trademarks and trade names may be used in this document to refer to either the entities
claiming the marks and names or their products. Dell Computer Corporation disclaims any
proprietary interest in trademarks and trade names other than its own.
Model HC01U
May 2003
P/N K1971
Rev. A00
Contents
Finding Information
. . . . . . . . . . . . . . . .
9
1 About Your Device
Front, Side, and Back Views
. . . . . . . . . . .
12
. . . . . . . . . . . . .
12
. . . . . . . . . . . . . . . . . .
14
Front and Side Views
Back View
Using the Batteries
. . . . . . . . . . . . . . . .
Installing and Removing the Main
Battery . . . . . . . . . . . . .
. . . . . . .
Installing and Removing the Backup
Battery . . . . . . . . . . . . . . .
17
. . . . . . . . . .
18
. . . . . . . . . . . .
19
. . . . . . . . . . . . . . .
19
Connecting to a Computer
Using the Sync Cable
Using Cards
16
. . . . .
Charging the Main Battery
Using the Cradle
15
. . . . . . . . . . . . .
22
. . . . . . . . . . . . . . . . . . . .
23
CompactFlash Cards
. . . . . . . . . . . . .
Secure Digital Memory Cards
23
. . . . . . . . .
24
. . . . . . . . . . . . . . . .
24
Soft Reset .
. . . . . . . . . . . . . . . . . .
24
Hard Reset
. . . . . . . . . . . . . . . . . .
25
Performing a Reset
Contents
3
2 Using Microsoft ® Pocket PC
Device Buttons and the Stylus
. . . . . . . . . .
28
. . . . . . . . . . . . . . . . . . .
28
. . . . . . . . . . . . . . . . . . . .
30
. . . . . . . . . . . . . . . . . . . . .
31
Today Screen
Status Icons
Programs
. . . . . . . . . . . . . . .
31
. . . . . . . . . . . . . . . . .
32
Program Buttons .
Switcher Bar .
. . . . . . . .
33
. . . . . . . . . . . . . . . . . . .
35
Navigation Bar and Command Bar
Pop-Up Menus
. . . . . . .
36
. . . . . . . . . . . . . . . . .
37
Finding and Organizing Information
Backing Up Data .
3 Entering Information
Entering Text Using the Input Panel
40
. . . . . . . .
42
Letter Recognizer
. . . . . . . . . . . . . . .
42
Block Recognizer
. . . . . . . . . . . . . . .
43
. . . . . . . . . . . . . . . . . .
43
Typing With the Soft Keyboard .
Transcriber
Editing Typed Text
. . . . . . . . . . . . . . .
44
Writing on the Screen
. . . . . . . . . . . . . . .
44
. . . . . . . . . . . . . .
45
Drawing on the Screen
. . . . . . . . . . . . . .
48
Creating a Drawing
. . . . . . . . . . . . . .
48
. . . . . . . . . . . . . . .
49
Editing Written Text
Editing a Drawing
4
. . . . . . .
Contents
Recording a Message
Using My Text .
. . . . . . . . . . . . . . .
50
. . . . . . . . . . . . . . . . . .
51
4 Adjusting Settings
Personal Tab
System Tab
. . . . . . . . . . . . . . . . . . .
54
. . . . . . . . . . . . . . . . . . . .
54
Connections Tab
. . . . . . . . . . . . . . . . .
55
5 Using Microsoft ® ActiveSync ®
About ActiveSync .
. . . . . . . . . . . . . . . .
Installing and Using ActiveSync
. . . . . . . . .
58
59
6 Scheduling and Communicating
About Microsoft® Pocket Outlook
Calendar
. . . . . . . .
62
. . . . . . . . . . . . . . . . . . . . .
62
Using the Summary Screen
. . . . . . . . . .
64
Creating Meeting Requests
. . . . . . . . . .
64
. . . . . . . . . . . . . . . . . . . . .
65
Contacts
Finding a Contact
. . . . . . . . . . . . . . .
Using the Summary Screen
66
. . . . . . . . . .
67
Tasks
. . . . . . . . . . . . . . . . . . . . . . .
67
Notes
. . . . . . . . . . . . . . . . . . . . . . .
68
Contents
5
Inbox .
. . . . . . . . . . . . . . . . . . . . . . .
Synchronizing E-Mail Messages
. . . . . . . .
Connecting Directly to an E-Mail Server
Using the Message List
Composing Messages .
70
. . . .
71
. . . . . . . . . . . .
71
. . . . . . . . . . . . .
73
Managing E-Mail Messages and Folders
Notifications
70
. . . .
75
. . . . . . . . . . . . . . . . . . . .
76
7 Adding and Removing Programs
Adding Programs Using Microsoft®
ActiveSync® . . . . . . . . . . . . .
. . . . . . .
78
. . . .
79
. . . . . . .
80
Using File Explorer on the Device
. . . . . . .
80
Using ActiveSync on the Computer
. . . . . . .
80
. . . . . . . . . . . . . . . .
81
Downloading Programs From the Internet
Adding a Program to the Start Menu
Removing Programs
8 Using Companion Programs
Microsoft Pocket Word
Pocket Excel .
. . . . . . . . . . . . . .
84
. . . . . . . . . . . . . . . . . . .
86
. . . . . . .
88
. . . . . . . . . . . . . . . . . .
89
. . . . . . . . . . . . . . . . . . .
89
Tips for Working in Pocket Excel
MSN Messenger
Setting Up
6
Contents
Working With Contacts
. . . . . . . . . . . .
90
Chatting With Contacts
. . . . . . . . . . . .
90
Windows® Media Player for Pocket PC
Microsoft Reader
. . . . .
91
. . . . . . . . . . . . . . . . .
91
. . . . . . . . . . . . . . .
92
. . . . . . . . . . . . . . . .
92
Using the Library
Reading a Book
Using Reader Features
Removing a Book
. . . . . . . . . . . .
93
. . . . . . . . . . . . . . .
95
9 Using Microsoft ® Pocket Internet
Explorer
Mobile Favorites
. . . . . . . . . . . . . . . . .
Conserving Memory
. . . . . . . . . . . . . .
Mobile Favorites Folder
Favorite Links .
98
99
. . . . . . . . . . . .
100
. . . . . . . . . . . . . . . .
100
Using AvantGo Channels
. . . . . . . . . . . . .
100
. . . . .
101
. . . . . . . . . . . . . . . . . .
106
Browsing Mobile Favorites and the Web
10 Getting Connected
Using Infrared
Creating a Modem Connection
. . . . . . . . . .
. . . . . . . .
108
. . . . . . . . . . .
109
. . . . . . . . . . . . . . .
110
Creating an Ethernet Connection
Creating a VPN Connection
Ending a Connection
107
. . . .
111
. . . . . . . . . . .
111
Connecting Directly to an E-Mail Server .
Getting Help on Connecting
Contents
7
11 Appendix
Specifications
. . . . . . . . . . . . . . . . . .
Regulatory Notices
. . . . . . . . . . . . . . .
. . . . . . . . . . .
119
IC Notice (Canada Only)
. . . . . . . . . . .
121
CE Mark Notice
. . . . . . . . .
122
. . . . . . . . . . . . . . .
122
EN 55022 Compliance
(Czech Republic Only) .
. . . . . . . . . . .
MIC Notice (Republic of Korea Only) .
Contacting Dell
124
. . . . . . .
127
. . . . . . . . . . . . . . . . .
128
. . . . .
149
. . . . .
149
. . . . . .
153
Limited Warranties and Return Policy
Limited Warranty for Dell-Branded
Hardware Products (U.S. Only) . .
"Total Satisfaction" Return Policy
(U.S. Only) . . . . . . . . . . . .
Limited Warranty Terms for Dell-Branded
Hardware Products (Canada Only) . . . .
. .
154
. . . . . .
158
. . . . . . . .
159
"Total Satisfaction" Return Policy
(Canada Only) . . . . . . . . . .
Dell Software and Peripherals
(Canada Only) . . . . . . . .
1-Year End-User Manufacturer Guarantee
(Latin America and the Caribbean Only) .
Glossary
. .
160
. . . . . . . . . . . . . . . . . . . . .
163
. . . . . . . . . . . . . . . . . . . . . . . . .
Contents
124
. . . .
NOM Information (Mexico Only)
8
117
FCC Notices (U.S. Only)
CE Notice (European Union)
Index
114
165
What Are You Looking For?
Find It Here:
How to set up my device and
information on the connectors and
buttons on my device
Getting Started placemat and the
Dell™ User’s Guide
Information on using my device.
Dell User’s Guide and Pocket PC Help.
To view Help, tap the Start button and
tap Help.
Additional programs that can be
installed on my device
Dell Companion CD
Information on using programs on my
device
Pocket PC Help and, if available, tap
Help within a specific program
Connecting to and synchronizing with Dell User’s Guide and Microsoft®
ActiveSync® Help on your computer.
a computer
To view Help, click Help and click
Microsoft ActiveSync Help.
Last-minute updates and detailed
technical information
The readme files, located in the
ActiveSync folder on the computer and
on the Dell Companion CD.
Up-to-date information on your Pocket www.microsoft.com/mobile/pocketpc
PC
My service tag
Label located in the main battery slot
(remove the main battery)
F i ndi n g I n fo r m a t i o n
9
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Finding Information
10
F i n d i n g I n f o r ma t i o n
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
1
SECTION 1
A b o u t Yo u r D e v i c e
Front, Side, and Back Views
Using the Batteries
Connecting to a Computer
Using Cards
Performing a Reset
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Front, Side, and Back Views
CAUTION: Before performing any of the procedures in this
section, read and follow the safety instruction in the System
Information Guide .
Front and Side Views
infrared sensor (top)
Secure
Digital
card slot
microphone
scroll
dial
stylus
(extended)
power button
touch screen
record
button
reset
button
Home button
Inbox button
speaker
Calendar button
Contacts button
navigator button
— The infrared sensor lets you transfer files from your
device to another infrared-compatible device without using cable connections.
INFRARED SENSOR
MICROPHONE
— Allows you to record audio.
— Use the stylus to write or draw on the screen. To remove the stylus,
pull it straight up and out of the holder. To avoid losing the stylus, store the stylus
in the holder when you are not using it. Ensure that the stylus is oriented correctly
when you replace it in the slot.
STYLUS
— Press the power button to turn the device on or off. Press
and hold the power button to dim the display. Repeat to light the display.
POWER BUTTON
12
A b ou t Yo u r D ev ic e
T O U C H S C R E E N — Use the touch screen and the stylus to enter information
into your device. See "Entering Information" on page 39.
H O M E B U T T O N — Press this button to launch Home or to turn on the device.
I N B OX B U T T O N — Press this button to launch your Inbox or to turn on the
device.
SPEAKER
— Tap the speaker icon to adjust the volume.
— Press the right, left, top, or bottom of the navigator
button to move the cursor on the screen.
NAVIGATOR BUTTON
C O N T A C T S B U T T O N — Press this button to launch Contacts or to turn on the
device.
C A L E N D A R B U T T O N — Press this button to launch Calendar or to turn on the
device.
— See "Performing a Reset" on page 24 for information on
using the reset button.
RESET BUTTON
— See "Recording a Message" on page 50 for information on
using the record button.
RECORD BUTTON
SCROLL DIAL
• Press the scroll dial to perform actions similar to pressing <Enter> on a
keyboard.
• Rotate the scroll dial up or down to perform actions similar to using the up- and
down-arrow keys on a keyboard.
For information on the functionality of the scroll dial within programs, see Pocket
PC Help on your device.
S E C U R E D I G I T A L C A R D S L O T — See "Secure Digital Memory Cards" on
page 24 for information on using Secure Digital memory cards.
About Yo ur De vi ce
13
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
• When the device is connected to external power and the main battery is fully
charged, the power button light is solid green.
• When the main battery charge is low, the power button light flashes amber.
• When the main battery is charging, the power button light is solid amber.
• When the device relays a notification, the power button light flashes green.
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Back View
headphone connector (top)
CompactFlash card slot
stylus (secured)
backup battery cover
main battery lock
main battery
cradle/sync cable
connector (bottom)
AC adapter
connector
(bottom)
C O M P A C T F L A S H C A R D S L O T — See "CompactFlash Cards" on page 23 for
information on using CompactFlash cards.
MAIN BATTERY
main battery.
— See "Using the Batteries" on page 15 for information on the
A C A D A P T E R C O N N E C T O R — Connect the AC adapter.
CRADLE/SYNC CABLE CONNECTOR
— Connect a cradle or sync cable. See
"Connecting to a Computer" on page 19.
M A I N B A T T E R Y L O C K — Use this switch to release and remove the main
battery. See "Installing and Removing the Main Battery" on page 16.
— Secures the backup battery. See "Installing and
Removing the Backup Battery" on page 17.
BACKUP BATTERY COVER
HEADPHONE CONNECTOR
14
— Attach headphones.
A b ou t Yo u r D ev ic e
Your device uses two batteries:
•
rechargeable main battery
•
lithium coin-cell backup battery
NOTICE: Do not use your device until you have charged the main battery
for at least 4 hours.
Before you use your device for the first time, you must install both
batteries and completely charge the main battery. Once the main battery
is charged, use the power properties to monitor the battery charge. See
Pocket PC Help on the device for more information.
NOTICE: After you install the batteries for the first time, do not remove the
main battery and the backup battery from the device at the same time. Doing
so results in the loss of all data stored in SDRAM.
NOTICE: If you need to replace both batteries at the same time, ensure that
you replace the main battery first.
About Yo ur De vi ce
15
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Using the Batteries
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Installing and Removing the Main Battery
To install the main battery:
1
Ensure that the device is turned off.
2
Ensure that the main battery is oriented correctly and slide the
battery into the slot until you feel a click.
To remove the main battery:
1
Insert the tip of the stylus into the main battery lock.
2
Slide and hold the lock in the unlock position.
3
Slide the battery out of the slot.
battery slot
main battery lock
stylus
main battery
NOTE: Your service tag is located underneath the main battery. You
need your service tag if you access Dell Support at support.dell.com
or if you call Dell for customer service or technical support.
16
A b ou t Yo u r D ev ic e
NOTICE: Do not remove the backup battery unless the AC adapter is
connected or the main battery is installed. Otherwise, you might lose data.
To install the backup battery:
1
Ensure that the device is turned off.
2
Insert the stylus into the backup battery release and slide the release
to the left to remove the cover.
backup battery
release
backup
battery cover
stylus
3
Wipe off the backup battery with a dry cloth.
4
Insert the backup battery with the positive side (+) facing up.
5
Slide the cover on and ensure that it is flush with the back of the
device.
About Yo ur De vi ce
17
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Installing and Removing the Backup Battery
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
To remove the backup battery:
1
Insert the tip of the stylus into the backup battery release.
2
Slide the release to the left and remove the cover.
3
With your finger tip, gently press the right side of the battery to tilt
up the left side of the battery.
backup
battery
4
Remove the battery.
Charging the Main Battery
Use one of the following options to charge the main battery:
•
Connect the AC adapter directly to the device and to an electrical
outlet.
•
Connect the AC adapter to the cradle, and insert the device into the
cradle. See "Using the Cradle" on page 19 for more information.
18
A b ou t Yo u r D ev ic e
You either connect your device to a computer using a cradle or directly to
a computer using a sync cable. Connect your device to a computer to:
•
Add programs to your device. See "Adding Programs Using
Microsoft® ActiveSync®" on page 78 for more information.
•
Synchronize data on your device with data on your computer.
For information on synchronizing your data, see the following resources:
•
"Using Microsoft® ActiveSync®" on page 57
•
ActiveSync Help on your computer
•
ActiveSync Help on your device
Using the Cradle
NOTE: Depending on the configuration of your device, the cradle is
optional.
You can use the cradle to:
•
Synchronize the data on your device with the data on your computer.
•
Power the device with AC power to conserve battery power.
•
Charge the main battery. See "Using the Batteries" on page 15 for
more information.
•
Charge a spare battery.
Before connecting your device to a computer for the first time, ensure that
you install ActiveSync on the computer from the Dell™ Companion CD.
About Yo ur De vi ce
19
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Connecting to a Computer
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
To connect your device to the cradle:
1
Place the cradle on a flat, level surface near your computer.
2
Depending on the type of cradle that you have, connect the cradle
cable to either the USB or serial connector on your computer.
USB connector
on the computer
serial connector
on the computer
cradle cable
AC adapter
power
cord
cradle
20
A b ou t Yo u r D ev ic e
Connect the AC adapter to the cradle and to an electrical outlet.
spare battery
charger
front of cradle
stylus holder
spare battery
status light
4
Align the connector on the bottom of the device with the connector
on the cradle, and, keeping the front of the device flush with the
front of the cradle, lower the device onto the cradle.
When the device is docked in the cradle, the DELL™ logo on the cradle
lights up and the connection status icon appears on the command bar (see
page 29).
The spare battery status light on the cradle operates as follows:
•
Green — The spare battery is fully charged.
•
Amber — The spare battery is charging.
NOTE: The power button on the device indicates the charge status of
the main battery. See the description of the device status lights on
page 13 for more information.
About Yo ur De vi ce
21
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
3
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
To remove the device from the cradle, pull the device straight up and out
of the cradle.
Using the Sync Cable
Use the sync cable to connect your device directly to the computer
without using the cradle.
NOTE: Depending on the configuration of your device, the sync cable
is optional.
To connect the sync cable:
1
Depending on the type of sync cable that you have, connect one end
of the cable to either the USB connector or the serial connector on
your computer.
2
Connect the other end of the cable to your device.
USB connector
on the computer
serial connector
on the computer
power
cord
AC adapter
22
A b ou t Yo u r D ev ic e
sync cable
device
connector
CompactFlash Cards
Your device supports CompactFlash Type I and Type II cards. Some
common types of cards include:
•
Modem — Connect a telephone line for modem data
communications.
•
Wireless communication — Perform data communications without
the use of cable connections. You can use cards, such as Bluetooth™
and 802.11b wireless LAN.
•
Storage — Save data or install programs on a storage card.
When you do not have a CompactFlash card installed, insert the plastic
blank to protect the CompactFlash card slot.
To install a CompactFlash card:
1
If a blank is installed, remove it.
blank
CompactFlash
card slot
2
Ensure that the CompactFlash card is oriented correctly, and slide
the card into the slot.
NOTICE: Do not force the card. If you feel resistance, remove the card,
check the orientation, and reinsert it.
See the documentation that came with the card for information on using
the card.
About Yo ur De vi ce
23
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Using Cards
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Secure Digital Memory Cards
Use Secure Digital memory cards to save or back up data.
To install a Secure Digital memory card:
blank
1
If a card is already installed, press in the card to release it, and then
remove it.
2
Ensure that the card is oriented correctly, and slide it into the slot
until you feel a click.
NOTICE: Do not force the card. If you feel resistance, remove the card,
check the orientation, and reinsert it.
See the documentation that came with the card for information on using
the card.
Performing a Reset
Soft Reset
When you perform a soft reset, the device deletes any data that has not
been saved but saves any data that has been stored in memory. Try
performing a soft reset if the device does not respond when you tap the
display or press a button.
To perform a soft reset, use the stylus to press the reset button.
24
A b ou t Yo u r D ev ic e
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
reset button
stylus
Hard Reset
NOTICE: When you perform a hard reset, you lose all the data stored on
your device.
Perform a hard reset if:
•
You want to delete all the data stored on your device.
•
You forget your password and need to clear it.
•
Your device is experiencing severe operational problems and you have
already attempted a soft reset.
NOTICE: It is strongly recommended that you back up your data before you
perform a hard reset. See ActiveSync Help on your computer for more
information.
To perform a hard reset:
1
Press and hold the power button.
2
With the stylus, hold the reset button for about 2 seconds.
3
Follow the instructions on the screen.
About Yo ur De vi ce
25
26
A b ou t Yo u r D ev ic e
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
2
SECTION 2
Using Microsoft®
Pocket PC
Device Buttons and the Stylus
Today Screen
Status Icons
Programs
Navigation Bar and Command Bar
Pop-Up Menus
Finding and Organizing Information
Backing Up Data
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Device Buttons and the Stylus
Your device has hardware buttons that control actions and scroll
functions, and a stylus for selecting items and entering information.
On the device, the stylus replaces the mouse:
•
Tap — Touch the screen once with the stylus to open items and
select options.
•
Drag — Hold the stylus and drag across the screen to select text and
images. Drag in a list to select multiple items.
•
Tap and hold — Tap and hold the stylus on an item to see a list of
actions available for that item. On the pop-up menu that appears,
tap the action you want to perform.
See "Entering Information" on page 39 for more information.
Today Screen
When you turn on your device for the first time each day (or after 4 hours
of inactivity), the Today screen appears. You can also view the Today
screen by tapping the Start button and then tapping Today. The Today
screen displays the date and information about the device owner, today’s
calendar, and important tasks. To customize the Today screen:
1
Tap the Start button and tap Settings.
2
Tap the Personal tab and tap Today.
Use the Appearance tab to change the background that displays on
the Today screen.
Use the Items tab to change the items that appear on the Today
screen.
28
U s i n g M i c r o s o f t ® Po cke t P C
connection
configuration icon
volume control icon
connection
status icon
New items menu
Using Microsof t ® Po cke t PC
29
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Start
button
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Status Icons
NOTE: If there is not enough room to display all notification icons,
the notification icon,
, displays. Tap the notification icon to view
all notifications.
Icon
Description
Turns sound on and off.
Backup battery is low.
Main battery is charging.
Main battery is low.
Main battery is very low.
Main battery is full.
Connection is active. Tap the icon to configure
connections.
Connection is not detected.
Wireless network is detected.
Synchronization is beginning or ending.
30
U s i n g M i c r o s o f t ® Po cke t P C
Description
Synchronization is occurring.
New instant message(s).
New e-mail message(s).
Programs
You can switch from one program to another by selecting a program from
the Start menu. To access programs that are not listed in the Start menu,
tap the Start button, tap Programs, and then tap the program name.
NOTE: Some programs have abbreviated labels for check boxes and
drop-down menus. To see the full spelling of an abbreviated label,
tap and hold the stylus on the label. Drag the stylus off the label so
that the command is not carried out.
Program Buttons
You can also switch to some programs by pressing a program button. Your
device has four program buttons located on the front of the device. The
icons on the buttons identify the programs to which they switch. By
default, the buttons launch Home, Inbox, Contacts, and Calendar.
Using Microsof t ® Po cke t PC
31
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Icon
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Switcher Bar
You can also use Switcher Bar to switch to or close open programs. To
launch Switcher Bar:
1
Tap the Start button and tap Settings.
2
Tap the System tab and tap Switcher Bar.
The Switcher Bar icon,
Tap
, appears in the navigation bar.
to view a list of all open programs. In the Switcher Bar menu:
•
Tap Brightness settings or Power settings to configure those settings.
•
Tap a program name to switch to that program.
•
Tap Exit current program to close the current program.
•
Tap Exit all programs to close all open programs.
•
Tap Exit Switcher Bar to close the menu.
The following table contains a partial list of programs that are on your
device. See the Dell™ Companion CD for additional programs that you
can install on your device.
Icon
32
Program
Description
ActiveSync
Synchronize information
between your device and
your computer.
Calendar
Keep track of your
appointments and create
meeting requests.
Contacts
Keep track of your friends
and colleagues.
Inbox
Send and receive e-mail
messages.
U s i n g M i c r o s o f t ® Po cke t P C
Program
Description
Pocket Internet Explorer
Browse websites and WAP
sites, and download new
programs and files from the
Internet.
Notes
Create handwritten or
typed notes, drawings, or
recordings.
Tasks
Keep track of your tasks.
Pocket Excel
Create new workbooks or
view and edit Excel
workbooks that you created
on your computer.
MSN Messenger
Send and receive instant
messages with your MSN
Messenger contacts.
Pocket Word
Create new documents or
view and edit Word
documents that you created
on your computer.
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Icon
Navigation Bar and Command Bar
The navigation bar is located at the top of the screen. It displays the active
program and current time and allows you to switch to other programs and
close screens.
Use the command bar at the bottom of the screen to perform tasks in
programs. The command bar includes menu names, icons, and the input
panel icon. To create a new item in the current program, tap New. To see
the name of an icon, tap and hold the stylus on the icon. Drag the stylus
off the icon so that the command is not carried out.
Using Microsof t ® Po cke t PC
33
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
navigation bar
Start menu
command bar
34
U s i n g M i c r o s o f t ® Po cke t P C
With pop-up menus, you can quickly select an action for an item. For
example, you can use the pop-up menu in the contact list to delete a
contact, make a copy of a contact, or send an e-mail message to a contact.
The actions in the pop-up menus vary from program to program. To
access a pop-up menu, tap and hold the stylus on an item name. When
the menu appears, lift the stylus and tap the action you want to perform.
To close the menu without performing an action, tap anywhere outside
the menu.
Using Microsof t ® Po cke t PC
35
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Pop-Up Menus
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Finding and Organizing Information
The Find feature on your device helps you to quickly locate information.
On the Start menu, tap Find. Enter the item that you want to find, select
a data type from the drop-down menu, and then tap Go to start the
search.
You can also use the File Explorer to find files on your device and to
organize your files into folders. On the Start menu, tap Programs and tap
File Explorer.
sort menu
folder location
36
U s i n g M i c r o s o f t ® Po cke t P C
NOTICE: If you are upgrading to Pocket PC 2003 from Pocket PC 2002,
do not use the Data Backup utility on your device or the Backup/Restore
option in ActiveSync to back up your files. You cannot recover your data
after you install the upgrade if you do so. Follow the instructions included
with the Pocket PC 2003 System Update to back up your data.
To prevent or minimize data loss, you should periodically back up the data
stored on your device. Use ActiveSync to synchronize the files on your
device with the files on your computer. You can also drag and drop files
from your device to your computer using Windows Explorer. See the
ActiveSync Help on your computer for additional information.
Using Microsof t ® Po cke t PC
37
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Backing Up Data
38
U s i n g M i c r o s o f t ® Po cke t P C
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
3
SECTION 3
Entering
Information
Entering Text Using the Input Panel
Writing on the Screen
Drawing on the Screen
Recording a Message
Using My Text
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
You have several options for entering information:
•
Use the input panel to enter typed text using the soft keyboard or
another input method.
•
Write directly on the screen with the stylus.
•
Draw pictures on the screen with the stylus.
•
Speak into your device microphone to record a message.
Use Microsoft® ActiveSync® to synchronize or copy information from
your computer to your device. For more information on ActiveSync, see
ActiveSync Help on your computer.
Entering Text Using the Input Panel
Use the input panel to enter information in any program on your device.
You can type using the soft keyboard or write using Letter Recognizer,
Block Recognizer, or Transcriber. The characters appear as typed text on
the screen.
input panel icon
To show or hide the input panel, tap the input panel icon. Tap the arrow
next to the input panel icon to change input methods.
40
E n te r in g I n fo r m ation
suggested words
To change word suggestion options, such as the number of words
suggested:
1
Tap the Start button and tap Settings.
2
Tap the Personal tab, tap Input, and then tap the Word Completion
tab.
3
Select the desired settings and tap OK.
Entering Info r m ation
41
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
When you use the input panel, your device anticipates the word you are
typing or writing and displays it above the input panel. When you tap the
displayed word, the word is inserted at the insertion point. The more you
use your device, the more words it learns to anticipate.
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Typing With the Soft Keyboard
1
Tap the arrow next to the input panel icon and tap Keyboard.
2
Tap the keys on the soft keyboard with your stylus.
Letter Recognizer
Letter Recognizer allows you to use your stylus to write letters on the
screen as you would write them on paper.
NOTE: Letter Recognizer is included with the English, French,
German, Italian, and Spanish operating systems. Other versions do
not support Letter Recognizer.
1
Tap the arrow next to the input panel icon and tap Letter
Recognizer.
2
With your stylus, write a letter between the lines that appear on the
bottom of the screen.
The letters are converted to typed text on the screen. For specific
instructions on using Letter Recognizer, tap the question mark next
to the writing area.
NOTE: Tap Demo to learn the character strokes that the device can
recognize.
42
E n te r in g I n fo r m ation
Block Recognizer allows you to use character strokes that are similar to
those used on other handheld devices.
NOTE: Block Recognizer is included with the English, French,
German, Italian, and Spanish operating systems. Other versions do
not support Block Recognizer.
1
Tap the arrow next to the input panel icon and tap Block Recognizer.
2
Using your stylus, write the appropriate character stroke in the box
that appears at the bottom of the screen.
The character strokes are converted to typed text on the screen. For
specific instructions on using Block Recognizer, tap the question
mark next to the writing area.
NOTE: Tap Demo to learn the character strokes that the device can
recognize.
Transcriber
Transcriber allows you to write anywhere on the screen using the stylus
similar to the way that you would write on paper. Unlike Letter Recognizer
and Block Recognizer, you can write a sentence or more, and then pause to
let Transcriber change the written characters to typed characters.
NOTE: Transcriber is included with the English, French, and German
operating systems. Other versions do not support Transcriber.
1
Tap the arrow next to the input panel icon and tap Transcriber.
2
With your stylus, write anywhere on the screen.
When you pause, Transcriber converts your written characters to
typed characters. For specific instructions on using Transcriber, tap
the question mark in the lower right hand corner of the screen.
Entering Info r m ation
43
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Block Recognizer
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Editing Typed Text
To edit or format typed text, you must select it first:
1
Drag the stylus across the text that you want to select.
2
Tap and hold the selected text.
3
Tap the appropriate editing command in the pop-up menu.
You can also tap Edit at the bottom of the screen to select editing
commands.
Writing on the Screen
In any program that accepts written text, such as the Notes program and
the Notes tab in some programs, you can use your stylus to write directly
on the screen. You can edit and format what you have written and convert
the information to text at a later time.
NOTE: Some programs that accept written text may not have the pen
icon. See the documentation for that program to find out how to
switch to writing mode.
To write on the screen, tap the pen icon to switch to writing mode. This
action displays lines on the screen to help you write.
44
E n te r in g I n fo r m ation
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
pen icon
Editing Written Text
To edit or format written text, you must select it first:
1
Tap the pen icon to deselect it.
2
Drag the stylus across the text that you want to select.
3
Tap and hold the selected text.
4
Tap the appropriate editing command in the pop-up menu.
You can also tap Edit at the bottom of the screen to select editing
commands.
5
Tap the pen icon to switch back to writing mode.
Entering Info r m ation
45
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
To convert written text to print-style text, tap Tools and tap Recognize.
If you want to convert only certain words, select them before tapping
Recognize (or tap and hold the selected words and then tap Recognize on
the pop-up menu). If a word is not recognized, it is not converted to printstyle text.
If the conversion is incorrect, you can select different words from a list of
alternatives or return to the original written text:
1
Tap and hold the incorrect word.
2
On the pop-up menu, tap Alternates.
A menu with a list of alternative words appears.
3
46
Tap the correct word, or tap the written text at the top of the menu
to return to the original written text.
E n te r in g I n fo r m ation
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
alternate
words
Tips for getting good recognition:
•
Write neatly.
•
Write on the lines and draw descenders below the line. Write the
cross of the "t" and apostrophes below the top line so that they are
not confused with the word above. Write periods and commas above
the line.
•
For better recognition, try changing the zoom level to 300 percent
using the Tools menu.
•
Write the letters of a word closely and leave big gaps between words
so that the device can easily determine where words begin and end.
•
Hyphenated words, foreign words that use special characters such as
accents, and some punctuation cannot be converted.
Entering Info r m ation
47
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
•
You cannot add written text to a word to change it after the word has
been recognized. You must delete the written word and write the new
word.
Drawing on the Screen
You can draw on the screen the same way that you write on the screen;
however, selecting and editing drawings is different than selecting and
editing written text. For example, selected drawings can be resized, while
written text cannot.
Creating a Drawing
NOTE: To zoom in or out on your drawing, tap Tools and tap a zoom
level.
Cross three ruled lines on your first stroke. A drawing box appears.
Subsequent strokes that touch or are inside of the drawing box become
part of the drawing. Drawings that do not cross three ruled lines are
treated as written text.
48
E n te r in g I n fo r m ation
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
drawing box
Editing a Drawing
To edit or format a drawing, you must select it first:
1
Tap and hold the stylus on the drawing until the selection handle
appears.
To select multiple drawings, deselect the pen icon and drag to select
the drawings.
2
Tap and hold the selected drawing and tap an editing command on
the pop-up menu.
Entering Info r m ation
49
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
3
You can cut, copy, and paste selected drawings by tapping and
holding the selected drawing and then tapping an editing command
on the pop-up menu.
You can also tap Edit at the bottom of the screen to select editing
commands.
To resize a drawing, ensure that the Pen icon is not selected, and drag a
selection handle.
Recording a Message
In any program where you can write or draw on the screen, you can also
quickly capture thoughts, reminders, and phone numbers by recording a
message. In Calendar, Tasks, and Contacts, you can include a recording in
the Notes tab. In the Notes program, you can either create a stand-alone
recording or include a recording in a written note. If you want to include
the recording in a note, open the note first. In the Inbox program, you can
add a recording to an e-mail message.
To record a message:
1
Hold the microphone near your mouth or other source of sound.
2
Press and hold the Record button on the side of your device until it
beeps.
3
While holding down the Record button, make your recording.
4
To stop recording, release the Record button.
The device beeps twice. The new recording appears in the note list or
as an embedded icon.
NOTE: You can also make a recording by tapping the Record icon on
the Recording toolbar.
To play a recording, tap the name of the recording in the list or tap the
speaker icon in the note.
50
E n te r in g I n fo r m ation
When using Inbox or MSN Messenger, use My Text to quickly insert
preset or frequently used messages. To insert a message, tap My Text and
tap a message.
NOTE: You can add text to a My Text message after you insert the
message.
To edit a My Text message:
1
In Inbox or MSN Messenger, tap Tools.
2
Tap Edit My Text Messages.
3
Make the changes and tap OK.
Entering Info r m ation
51
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Using My Text
52
E n te r in g I n fo r m ation
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
4
SECTION 4
Adjusting Settings
Personal Tab
System Tab
Connections Tab
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
You can adjust the device settings to suit the way you work. To see
available options, tap the Start button and tap Settings.
NOTE: Depending on the features of your device, you might have
additional tabs and additional items on the tabs.
See Pocket PC Help on your device for additional information on
adjusting settings (tap the Start button and tap Help).
Personal Tab
•
Buttons — Assign the programs that launch when you press the
hardware buttons.
•
Input — Adjust the settings for input method, word completion,
and other options.
•
Menus — Add or remove items from the Start menu.
•
Navigator Button — Configure your device to allow you to press the
center of the navigator button to perform functions similar to
pressing <Enter> on a keyboard.
•
Owner Information — Enter your contact information.
•
Password — Set a password to protect the data stored on your device.
•
Sounds & Notification — Adjust the volume and set notifications.
See "Notifications" on page 76 for more information.
•
Today — Customize the look and the information that is displayed
on the Today screen.
System Tab
•
About — Find information about Microsoft® Pocket PC and your
device.
•
Brightness — Adjust the brightness settings to conserve power.
54
Adjusting Settings
Certificates — View or delete certificates stored on your device.
Certificates help establish your identity and the identity of other
computers to prevent unauthorized users from accessing your data.
•
Clock — Change the time or set the alarm.
•
Microphone — Adjust the microphone gain.
•
Power — Check the battery or charge status. Set the amount of time
that the device can remain idle before it turns off.
•
Regional Settings — View and change the formatting for regional
settings, such as currency, time, and date.
•
Remove Programs — Remove programs from your device. For more
information, see "Adding and Removing Programs" on page 77.
•
Screen — Adjust the screen if your device is not responding
accurately to taps.
•
Switcher Bar — Adjust the settings of the Switcher Bar program
launcher utility.
•
System Information — View technical information about your
device.
Connections Tab
•
Beam — Receive infrared beams from other devices.
•
Bluetooth — Turn the Bluetooth™ radio on and off, and create and
edit bonded devices. By default, the Bluetooth radio is off.
•
Connections — Add and configure modem or server connections.
•
Wireless Ethernet — Configure your network adapter settings.
A d j u s ti n g S e t t i n g s
55
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
•
56
Adjusting Settings
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
5
SECTION 5
Using Microsoft®
ActiveSync®
About ActiveSync
Installing and Using ActiveSync
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
About ActiveSync
You can synchronize the information on your computer with the
information on your device with ActiveSync. Synchronization compares
the data on your device with the data on your computer and updates both
with the most recent information. For example:
•
Keep Microsoft Pocket Outlook data up-to-date by synchronizing
your device with Microsoft Outlook data on your computer.
•
Synchronize Microsoft Word and Microsoft Excel files between your
device and your computer. Your files are automatically converted to
the correct format.
NOTE: By default, ActiveSync does not automatically synchronize
all types of information. You can change ActiveSync options to
synchronize specific types of information.
With ActiveSync, you can also:
•
Back up and restore your device data.
NOTICE: If you are upgrading to Pocket PC 2003 from Pocket PC 2002,
do not use the Data Backup utility on your device or the Backup/Restore
option in ActiveSync to back up your files. You cannot recover your data
after you install the upgrade if you do so. Follow the instructions included
with the Pocket PC 2003 System Update to back up your data.
•
Copy (rather than synchronize) files between your device and your
computer.
•
Select a synchronization mode to control when synchronization
occurs. For example, you can synchronize continuously or only when
you select the synchronize command.
•
Select which information types are synchronized and control how
much data is synchronized. For example, you can choose how many
weeks of past appointments you want synchronized.
58
Using Microsof t ® ActiveSync ®
Installing and Using ActiveSync
To install ActiveSync:
1
Insert the Dell Companion CD.
2
Click the yellow triangle to access the main menu.
3
Click Start Here.
4
Click Install ActiveSync and follow the instructions on the screen.
After the installation is complete, the ActiveSync Setup Wizard helps you
to connect your device to your computer, set up a partnership so that you
can synchronize information between your device and your computer, and
customize your synchronization settings. Your first synchronization
process automatically begins when you complete the wizard.
During your first synchronization, information that was stored in Outlook
on your computer is copied to Calendar, Contacts, and Tasks on your
device.
After you set up ActiveSync and complete the first synchronization
process, you can initiate synchronization from your device. To switch to
ActiveSync on your device, tap the Start button and tap ActiveSync. If
you have a wireless LAN card, you can synchronize remotely from your
device.
To find information on using ActiveSync on your device, open ActiveSync
on your device, tap the Start button, and then tap Help.
To find information on using ActiveSync on your computer, open
ActiveSync on your computer, and click Help→ Microsoft ActiveSync
Help.
U s in g M i c r o s o f t ® ActiveSync ®
59
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
To synchronize your data, you need both the Microsoft Windows® and
Pocket PC versions of ActiveSync. You must install the Windows version
of ActiveSync on your computer using the Dell™ Companion CD. The
Pocket PC version is already installed on your device.
60
Using Microsof t ® ActiveSync ®
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
6
SECTION 6
Scheduling and
Communicating
About Microsoft® Pocket Outlook
Calendar
Contacts
Tasks
Notes
Inbox
Notifications
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
About Microsoft® Pocket Outlook
Pocket Outlook includes Calendar, Contacts, Tasks, Inbox, and Notes. You
can use these programs individually or together. For example, e-mail
addresses stored in Contacts can be used to address e-mail messages in
Inbox.
Using Microsoft ActiveSync®, you can synchronize information in
Microsoft Outlook or Microsoft Exchange on your computer with your
device. You can also synchronize this information directly with an
Exchange server. Each time you synchronize, ActiveSync compares the
changes you made on your device and computer or server and updates
both computers with the latest information. For information on using
ActiveSync, see ActiveSync Help on your computer.
You can switch to any of the following programs through the Start menu.
Calendar
Use Calendar to schedule appointments, including meetings and other
events. You can check your appointments in one of several views (Agenda,
Day, Week, Month, and Year) and easily switch views by using the view
menu. Tap the today icon to view the current date.
62
S c h e d u l i n g a n d C om m un i c a t i n g
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
today icon
view menu
input panel icon
NOTE: To customize Calendar, such as changing the first day of the
week, tap Tools and tap Options.
To create an appointment:
1
In the Day or Week view, tap the desired date and time for the
appointment.
2
Tap New.
3
Tap a field to select it, and enter a description and a location using
the input panel.
4
If necessary, tap the date and time to change them.
Sc he duling and Communic ating
63
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
5
To see all available fields, tap the input panel icon to hide it. Enter
the remaining information, if necessary.
6
To add notes, tap the Notes tab.
You can enter text, draw, or create a recording. For more information
on creating notes, see "Notes" on page 68.
7
When you have finished entering information, tap OK to return to
the calendar.
To receive a notification for an appointment, select Remind me in the
appointment settings. You can configure notifications through the
Sounds & Notifications icon. For more information, see "Notifications"
on page 76.
Using the Summary Screen
When you tap an appointment in Calendar, a summary screen displays.
To change the appointment, tap Edit.
Creating Meeting Requests
You can use Calendar to set up meetings with users of Outlook or Pocket
Outlook. The meeting request is automatically created when you
synchronize Inbox or when you connect to your e-mail server. To set how
you want meeting requests sent, tap Tools and tap Options. If you send
and receive e-mail messages through ActiveSync, select ActiveSync.
To schedule a meeting:
1
Create an appointment.
2
On the Appointment tab, tap the input panel to hide it, and then
tap Attendees.
The Attendees field lists the e-mail addresses that you have entered
in Contacts.
3
Select the meeting attendees.
The meeting notice is created automatically and placed in the
Outbox folder.
64
S c h e d u l i n g a n d C om m un i c a t i n g
Contacts
Use Contacts to maintain a list of your friends and colleagues. You can
quickly share Contacts information with other device users using the
infrared port.
category
search field
NOTE: To change the way information is displayed in the list, tap
Tools and tap Options.
Sc he duling and Communic ating
65
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
For more information on sending and receiving meeting requests, tap the
Start button, tap Help, and then tap Calendar or Inbox.
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
To create a contact:
1
Tap the Start button and tap Contacts.
2
Tap New.
3
Using the input panel, enter a name and other contact information.
Scroll down to see all available fields.
4
To assign the contact to a category, tap Categories and select a
category from the list.
In the contact list, you can display contacts by category.
5
To add notes, tap the Notes tab. You can enter text, draw, or create a
recording. For more information on creating notes, see "Notes" on
page 68.
6
When you have finished entering information, tap OK to return to
the calendar.
Finding a Contact
You can find a contact using one of the following methods:
•
In Contacts, enter a contact name in the field under the navigation
bar. To show all contacts, clear text from the box or tap the arrow to
the right of the box.
•
In Contacts, tap the category list (labeled All Contacts by default)
and select a category. To show all contacts again, tap All Contacts.
To view a contact not assigned to a category, select None.
•
To view the names of companies your contacts work for, tap View in
the contact list and tap By Company. The number of contacts that
work for that company is displayed to the right of the company
name.
•
Tap the Start button, tap Find, and then enter the contact name. In
the Type drop-down menu, tap Contacts, and then tap Go.
66
S c h e d u l i n g a n d C om m un i c a t i n g
When you tap a contact in the contact list, a summary screen is displayed.
To change the contact information, tap Edit.
Tasks
NOTE: To change the way information is displayed in the list, tap
Tools and tap Options.
Use Tasks to keep a list of things that you need to do.
sort menu
Sc he duling and Communic ating
67
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Using the Summary Screen
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
To create a task:
1
Tap the Start button and tap Tasks.
2
Tap New.
3
Enter a description using the input panel.
4
If necessary, enter a start date and due date or other information by
first tapping the field. Tap the input panel icon to hide it to see all
available fields.
5
To assign the task to a category, tap Categories and select a category
from the list. In the task list, you can display tasks by category.
6
To add notes, tap the Notes tab. You can enter text, draw, or create a
recording. For more information on creating notes, see "Notes" on
page 68.
7
When you have finished entering information, tap OK to return to
the calendar.
NOTE: To quickly create a task with only a subject, tap Tools and tap
Entry Bar. Tap Tap here to add a new task, and enter your task
information.
Notes
Quickly capture thoughts, reminders, ideas, drawings, and phone numbers
with Notes. You can create a written note or a recording. You can also
include a recording in a note. If a note is open when you create the
recording, it is included in the note as an icon. If a note is not open, the
recording is saved as a stand-alone recording.
68
S c h e d u l i n g a n d C om m un i c a t i n g
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
record icon
input panel icon
pen icon
To create a note:
1
Tap the Start menu and tap Notes.
2
Tap New.
3
Create your note by writing, drawing, typing, or recording. For more
information on using the input panel, writing and drawing on the
screen, and creating recordings, see "Entering Information" on
page 39.
Sc he duling and Communic ating
69
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Inbox
Use Inbox to send and receive e-mail messages:
•
Synchronize e-mail messages using Exchange or Outlook on your
computer.
•
Send and receive e-mail messages by connecting directly to an e-mail
server through an ISP or a network.
Synchronizing E-Mail Messages
You can synchronize e-mail messages along with the rest of your data if
you enable Inbox synchronization in ActiveSync. For information on
enabling Inbox synchronization, see ActiveSync Help on your computer.
NOTE: You can also synchronize e-mail messages with your
computer from a remote location. For more information, see "Getting
Connected" on page 105.
During synchronization:
•
Messages are copied from the e-mail folders of Exchange or Outlook
on your computer to the ActiveSync folder in Inbox on your device.
By default, you receive:
–
Messages from the past 3 days
–
The first 100 lines of each message
–
File attachments of less than 100 KB in size
•
E-mail messages in the Outbox folder on your device are transferred
to Exchange or Outlook on your computer, and then sent from those
programs.
•
E-mail messages in subfolders on your computer must be selected in
ActiveSync to be transferred.
70
S c h e d u l i n g a n d C om m un i c a t i n g
In addition to synchronizing e-mail messages with your computer, you can
send and receive e-mail messages by connecting to an e-mail server using a
modem or network card connected to your device. You need to set up a
remote connection to a network or an ISP, and a connection to your e-mail
server. For more information, see "Getting Connected" on page 105.
When you connect to the e-mail server:
•
New messages are downloaded to the device Inbox folder.
•
Messages in the device Outbox folder are sent.
•
Messages that have been deleted on the e-mail server are removed
from the device Inbox folder.
Messages that you receive directly from an e-mail server are linked to your
e-mail server rather than to your computer. When you delete a message on
your device, it is also deleted from the e-mail server the next time you
connect depending on the settings you selected in ActiveSync.
When you are working online, you read and respond to messages while
connected to the e-mail server. Messages are sent as soon as you tap Send,
which saves space on your device.
After you have downloaded new message headers or partial messages, you
can disconnect from the e-mail server and then decide which messages to
download completely. The next time you connect, Inbox downloads the
messages you have marked for retrieval and sends the messages you have
composed.
Using the Message List
Messages you receive are displayed in the message list. By default, the
most recently received messages are displayed first in the list.
When you receive a message, tap to open it. Unread messages are
displayed in bold.
Sc he duling and Communic ating
71
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Connecting Directly to an E-Mail Server
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
delete icon
previous/next message
forward icon
When you connect to your e-mail server or synchronize with your
computer, you receive by default:
•
Messages from the last 5 days
•
The first 100 lines of each new message
•
File attachments of less than 100 KB in size
72
S c h e d u l i n g a n d C om m un i c a t i n g
You specify your downloading preferences when you set up the service or
select your synchronization options. You can change the settings at any
time:
•
Change options for Inbox synchronization using ActiveSync options.
For more information, see ActiveSync Help on your computer.
•
Change options for direct e-mail server connections in Inbox on your
device. Tap Tools and tap Options. On the Service tab, tap the
service that you want to change. Tap and hold the service and select
Delete to remove a service.
Composing Messages
To compose a message:
1
Tap the Start button and tap Inbox.
2
Tap New.
Sc he duling and Communic ating
73
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
The original messages remain on the e-mail server or your computer. You
can mark the messages that you want to retrieve in full during your next
synchronization or e-mail server connection. In the message list, tap and
hold the message that you want to retrieve. On the pop-up menu, tap
Mark for Download. The icons in the Inbox message list indicate message
status.
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Contacts icon
record icon
3
In the To field, enter an e-mail of one or more recipients, separating
them with a semicolon. Or tap the Contacts icon to select names
from the contact list.
NOTE: All e-mail addresses entered in the e-mail fields in Contacts
appear in the Address Book.
4
74
Compose your message. To enter preset or frequently used messages,
tap My Text and select a message.
S c h e d u l i n g a n d C om m un i c a t i n g
Tap Send when you have finished the message.
If you are working offline, the message is moved to the Outbox folder
and sent the next time you connect.
Managing E-Mail Messages and Folders
By default, messages are displayed in one of five folders for each service
you have created: Inbox, Deleted Items, Drafts, Outbox, or Sent Items.
The Deleted Items folder contains messages that have been deleted on
the device. The behavior of the Deleted Items and Sent Items folders
depends on the options you have selected.To change the options, tap
Tools in the message list and tap Options. On the Message tab, select
your options.
To create a new folder, tap Tools, and tap Manage Folders. To move a
message to another folder, tap and hold the message in the message list
and tap Move to on the pop-up menu.
Folder Behavior With a Direct Connection to an E-Mail Server
The behavior of the folders you create depends on whether you use
ActiveSync, POP3, or IMAP4.
•
If you use ActiveSync, e-mail messages in the Inbox folder in Outlook
are automatically synchronized with your device. You can select to
synchronize additional folders by designating them for ActiveSync.
The folders you create and the messages you move are then mirrored
on the server. For example, if you move messages from the Inbox
folder to a folder named Family, and you have designated Family for
synchronization, the server creates a copy of the Family folder and
copies the messages into that folder. You can then read the messages
while away from your computer.
Sc he duling and Communic ating
75
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
5
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
•
If you use POP3 and you move e-mail messages to a folder you created,
the link is broken between the messages on the device and their
copies on the e-mail server. The next time you connect, the e-mail
server detects that the messages are missing from the device Inbox
and deletes them from the server. This prevents you from having
duplicate copies of a message. However, you no longer have access to
messages that you move to folders created from anywhere except the
device.
•
If you use IMAP4, the folders you create and the e-mail messages you
move are mirrored on the server. Therefore, messages are available to
you any time you connect to your e-mail server, whether it is from
your device or computer. This synchronization of folders occurs
whenever you connect to the server, create new folders, or
rename/delete folders when connected.
Notifications
You can set your device to remind you when you have something to do.
For example, if you have set up an appointment in Calendar, a task with a
due date in Tasks, or an alarm in Clock, you are notified in one of the
following ways:
•
A message box appears on the screen.
•
A sound, which you can specify, is played.
•
A light flashes on your device.
To configure the reminders and sounds for your device:
1
Tap the Start button and tap Settings.
2
On the Personal tab, tap Sounds & Notifications.
76
•
Volume tab — Adjust the volume and enable sounds.
•
Notifications tab — Set notifications for specific events.
S c h e d u l i n g a n d C om m un i c a t i n g
7
SECTION 7
Adding and
Removing Programs
Adding Programs Using Microsoft® ActiveSync®
Downloading Programs From the Internet
Adding a Program to the Start Menu
Removing Programs
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Programs that were already installed when you received your device are
stored in ROM. You cannot remove these programs, and you never
accidentally lose ROM contents. ROM programs can be updated using
installation programs with the *.xip extension. You can save data to either
ROM or RAM.
You can install any program created for your device as long as your device
has sufficient memory. The most popular place to find software for your
device is on the Microsoft Pocket PC website:
www.microsoft.com/mobile/pocketpc.
Adding Programs Using Microsoft®
ActiveSync®
You need to install the appropriate software for your device on your
computer before installing software on your device. See "Using Microsoft®
ActiveSync®" on page 57 for more information.
1
Determine your device and processor type so that you know which
version of the software to install:
a
Tap the Start button and tap Settings.
b
On the System tab, tap About.
c
From the Version tab, record the processor information.
2
Download the software to your computer (or insert the CD or floppy
disk that contains the software into your computer). You may see a
single *.xip, *.exe, or *.zip file, a Setup.exe file, or several versions of
files for different device types and processors. Ensure that you select
the program designed for the Pocket PC and your device processor
type.
3
Read any installation instructions, readme files, or documentation
that comes with the program. Many programs provide special
installation instructions.
4
Connect your device to your computer.
78
Adding and Removing Programs
Double-click the *.exe file.
If the file is an installer file, the installation wizard begins. Follow the
directions on the screen. Once the software has been installed on
your computer, the installer automatically transfers the software to
your device.
If the file is not an installer file, you receive an error message stating
that the program is valid but that it is designed for a different type of
computer. You need to move this file to your device. If you cannot
find any installation instructions for the program in the readme file
or documentation, use ActiveSync Explore to copy the program file
to the Program Files folder on your device. For more information on
copying files using ActiveSync, see ActiveSync Help on your
computer.
To open a program after the installation is complete, tap the Start button,
tap Programs, and then tap the program icon.
Downloading Programs From the
Internet
1
Determine your device and processor type so that you know which
version of the software to install:
a
Tap the Start button and tap Settings.
b
On the System tab, tap About.
c
From the Version tab, record the processor information.
2
Using Pocket Internet Explorer, download the program to your
device. You may see a single *.xip, *.exe or *.zip file, a Setup.exe file,
or several versions of files for different device types and processors.
Ensure that you select the program designed for the Pocket PC and
your device processor type.
3
Read any installation instructions, readme files, or documentation
that comes with the program. Many programs provide special
installation instructions.
A d d i ng a n d Rem o v i n g Pro g r a m s
79
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
5
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
4
Tap the file, such as a *.xip or *.exe file.
The installation wizard begins. Follow the directions on the screen.
Adding a Program to the Start Menu
1
Tap the Start button and tap Settings.
2
Tap Menus, tap the Start Menu tab, and then tap the check box for
the program.
If the program is not listed, you can either use File Explorer on the
device to move the program to the Start Menu folder, or use
ActiveSync on the computer to create a shortcut to the program and
place the shortcut in the Start Menu folder.
Using File Explorer on the Device
1
Tap the Start button, tap Programs, and tap File Explorer.
2
Locate the program. Tap the folder list (labeled My Documents by
default) and then tap My Device to see a list of all folders on the
device.
3
Tap and hold the program name and tap Cut on the pop-up menu.
4
Open the Start Menu folder located in the Windows® folder.
5
Tap and hold a blank area of the window, and tap Paste on the popup menu.
The program now appears on the Start menu. For more information on
using File Explorer, see "Finding and Organizing Information" on page 36.
Using ActiveSync on the Computer
Use Explorer in ActiveSync to explore your device files and locate the
program. Right-click the program and click Create Shortcut. Move the
shortcut to the Start Menu folder in the Windows folder. The shortcut
now appears on the Start menu. For more information, see ActiveSync
Help on your computer.
80
Adding and Removing Programs
1
Tap the Start button and tap Settings.
2
Tap the System tab and tap Remove Programs.
If the program does not appear in the list of installed programs, use
File Explorer on your device to locate the program.
3
Tap and hold the name of the program, and tap Delete on the popup menu.
A d d i ng a n d Rem o v i n g Pro g r a m s
81
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Removing Programs
82
Adding and Removing Programs
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
8
SECTION 8
Using Companion
Programs
Microsoft Pocket Word
Pocket Excel
MSN Messenger
Windows® Media Player for Pocket PC
Microsoft Reader
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
The companion programs include Microsoft® Pocket Word, Microsoft
Pocket Excel, Microsoft Money, Windows Media Player for Pocket PC,
and Microsoft Reader.
To switch to a companion program on your device, tap the Start button,
tap Programs, and then tap the program name.
Microsoft Pocket Word
Pocket Word works with Microsoft Word on your computer to give you
easy access to copies of your documents. You can create new documents
on your device, or you can copy documents from your computer to your
device. Synchronize documents between your computer and your device
so that you have the most up-to-date content in both locations.
Use Pocket Word to create documents, such as letters, meeting minutes,
and travel reports. To create a new file:
1
Tap the Start button→ Programs→ Pocket Word.
2
Tap New.
A blank document appears. Or, if you selected a template for new
documents in the Options dialog box, the template appears with
appropriate text and formatting already provided.
84
Using Companion Pr ograms
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
formatting
toolbar
show/hide
formatting toolbar
You can open only one document at a time. If you open a second
document, you are asked to save the first one. You can create, save, or edit
a document in a variety of formats, including Word (.doc), Pocket Word
(.psw), Rich Text Format (.rtf), and Plain Text (.txt).
Pocket Word contains a list of the files stored on your device. Tap a file in
the list to open it. To delete, make copies of, or send files, tap and hold a
file in the list. Then select the appropriate action in the pop-up menu.
U s i n g C o m p a n i on Pro g r a m s
85
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
You can enter information in Pocket Word in one of four modes: typing,
writing, drawing, or recording. These modes are displayed on the View
menu. Each mode has its own toolbar, which you can show and hide by
tapping the Show/Hide Toolbar icon on the command bar.
To change the zoom magnification, tap View, tap Zoom, and then select
the percentage that you want. Select a higher percentage to enter text and
a lower percentage to see more of your document.
If you are opening a Word document created on a computer, select Wrap
to Window on the View menu so that you can see the entire document.
Pocket Excel
Pocket Excel works with Microsoft Excel on your computer to give you
easy access to copies of your workbooks. You can create new workbooks on
your device, or you can copy workbooks from your computer to your
device. Synchronize workbooks between your computer and your device so
that you have the most up-to-date content in both locations.
Use Pocket Excel to create workbooks, such as expense reports and
mileage logs. To create a new file:
1
Tap the Start button→ Programs→ Pocket Excel.
2
Tap New.
A blank workbook appears. Or, if you selected a template for new
workbooks in the Options dialog box, the template appears with
appropriate text and formatting already provided.
86
Using Companion Pr ograms
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
formatting
toolbar
show/hide
formatting toolbar
You can open only one workbook at a time. If you open a second
workbook, you are asked to save the first one. You can create, save, or edit
a workbook in a variety of formats, including Pocket Excel (.pxl) and Excel
(.xls).
Pocket Excel contains a list of the files stored on your device. Tap a file in
the list to open it. To delete, make copies of, or send files, tap and hold a
file in the list. Then select the appropriate action from the pop-up menu.
Pocket Excel provides fundamental spreadsheet tools, such as formulas,
functions, sorting, and filtering. To display the toolbar, tap View and tap
Toolbar.
U s i n g C o m p a n i on Pro g r a m s
87
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
If your workbook contains sensitive information, you can protect it with a
password. To set a password, open the workbook, tap Edit, and then tap
Password. Every time you open the workbook, you need to enter the
password, so choose one that is easy for you to remember but difficult for
others to guess.
Tips for Working in Pocket Excel
Use the following tips when working in large worksheets in Pocket Excel:
•
Tap View and tap Full Screen to see as much of your worksheet as
possible. To exit full-screen mode, tap Restore.
•
Show and hide window elements. Tap View and then tap the
elements that you want to show or hide.
•
Freeze panes on a worksheet. First select the cell where you want to
freeze panes. Tap View and tap Freeze Panes. You might want to
freeze the top and leftmost panes in a worksheet to keep row and
column labels visible as you scroll through a sheet.
•
Split panes to view different areas of a large worksheet. Tap View and
tap Split. Drag the split bar to where you want it. To remove the
split, tap View and tap Remove Split.
•
Show and hide rows and columns. To hide a row or column, select a
cell in the row or column you want to hide. Tap Format, tap Row or
Column, and then tap Hide. To show a hidden row or column, tap
Tools, tap Go To, and then type a reference that is in the hidden row
or column. Then tap Format, tap Row or Column, and then tap
Unhide.
For more information on using Pocket Excel, tap the Start button and tap
Help.
88
Using Companion Pr ograms
With the MSN Messenger instant message program, you can:
•
See who is online.
•
Send and receive instant messages.
•
Have instant message conversations with groups of contacts.
To use MSN Messenger, you must have a Microsoft Passport account or a
Microsoft Exchange e-mail account. You must have a Passport to use MSN
Messenger Service. If you have a Hotmail or MSN account, you already
have a Passport. Once you have obtained either a Microsoft Passport or a
Microsoft Exchange account, you are ready to set up your account.
NOTE: Sign up for a Microsoft Passport account at
www.passport.com. Get a free Microsoft Hotmail e-mail address at
www.hotmail.com.
To switch to MSN Messenger, tap the Start button→ Programs→ MSN
Messenger.
Setting Up
Before you can connect, you must enter Passport or Exchange account
information.
To set up an account and sign in:
1
Tap the Start button→ Programs→ MSN Messenger.
2
Tap Tools and tap Options.
3
On the Accounts tab, enter your Passport or Exchange account
information.
4
To sign in, tap the sign-in screen and enter your e-mail address and
password.
U s i n g C o m p a n i on Pro g r a m s
89
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
MSN Messenger
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Working With Contacts
The MSN Messenger window shows all of your messenger contacts at a
glance, divided into Online and Not Online categories. From this view,
while connected, you can chat, send an e-mail, block the contact from
chatting with you, or delete contacts from your list using the pop-up
menu.
NOTE: If you already use MSN Messenger on your computer, your
contacts show up on your device without having to be added.
To see others online without them seeing you, tap Tools→ My Status→
Appear Offline.
If you block a contact, you appear offline but remain on the blocked
contact's list. To unblock a contact, tap and hold the contact, and then tap
Unblock on the pop-up menu.
Chatting With Contacts
•
Tap a contact name to open a chat window. Enter your message in
the text entry area at the bottom of the screen or tap My Text to
enter a preset message, and then tap Send.
•
To invite another contact to a multiuser chat, tap Tools, tap Invite,
and then tap the contact you want to invite.
•
To switch back to the main window without closing a chat, tap the
Contacts icon. To revert back to your chat window, tap Chats, and
select the person with whom you were chatting.
•
To know if the contact you are chatting with is responding, look for
the message under the text entry area.
For more information on using MSN Messenger, tap the Start button and
tap Help.
90
Using Companion Pr ograms
Use Windows Media Player for Pocket PC to play digital audio and video
files that are stored on your device or on a network. To switch to Media
Player for Pocket PC, tap the Start button→ Programs→ Windows
Media.
Use Windows Media Player on your computer to copy digital audio and
video files to your Pocket PC. You can play Windows Media and MP3 files
on your Pocket PC.
For more information about using Windows Media Player for Pocket PC,
tap the Start button and tap Help.
Microsoft Reader
Use Reader to read eBooks on your device. Download books to your
computer from your favorite eBook website. Then use ActiveSync to copy
the book files to your activated device. The books appear in the Reader
Library. Tap the name of a book in the list to open it.
With Reader, you can:
•
Page through the book by using the up/down control on your device
or by tapping the page number on each page.
•
Annotate the book with highlighting, bookmarks, notes, and
drawings.
•
Search for text and look up definitions for words.
The Guidebook contains all the information you need to use the software.
To open the Guidebook, tap Help on the Reader command bar. Or, on a
book page, tap and hold the book title, and then tap Help on the pop-up
menu.
To switch to Microsoft Reader, tap the Start button→ Programs→
Microsoft Reader.
U s i n g C o m p a n i on Pro g r a m s
91
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Windows® Media Player for
Pocket PC
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Using the Library
The Library displays a list of all books stored on your device or storage
card. To open the Library:
•
On the Reader command bar, tap Library.
•
On a book page, tap the book title, and then tap Library on the popup menu.
scroll through list
book list
Reading a Book
Each book consists of a cover page, an optional table of contents, and the
pages of the book. Navigation options are listed at the bottom of the cover
page.
92
Using Companion Pr ograms
In addition to text, each book page includes a page number and book title.
You can also page through a book by using the up/down control on your
device.
navigation
options
previous/next page
Using Reader Features
Reading a book electronically gives you several options not available with
paper books. The options are available from any book page.
U s i n g C o m p a n i on Pro g r a m s
93
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
The first time you open a book, you might want to go to the first page or
to the table of contents, if available. Subsequently, whenever you open the
book, you are automatically taken to the last page read.
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Select text by dragging across the text on the page. Then tap an option on
the pop-up menu:
•
Add Bookmark — When you add a bookmark to a book, a colorcoded bookmark icon appears in the right margin. You can add
multiple bookmarks to a book. From anywhere in the book, tap the
bookmark icon to go to the bookmarked page.
•
Add Highlight — When you highlight text, it appears with a colored
background.
•
Add Text Note — When you attach a note to text, you enter the text
in a note pad that appears on top of the book page. A note icon
displays in the left margin. To show or hide the note, tap the icon.
•
Add Drawing — When you add a drawing, a drawing icon appears
on the page. Draw by dragging your stylus.
•
Find — Tap Find on the pop-up menu to find text in a book. Enter
the word that you want to search for and tap a Find option. Reader
highlights text found on the page. To close Find, tap outside the box.
To return to your original page, tap the title and tap Return on the
pop-up menu.
•
Copy Text — You can copy text from books that support this feature
into any program that accepts text. On a book page, select the text
you want to copy. Then tap Copy Text on the pop-up menu. The text
can be pasted into the program of your choice.
•
To see a list of a book's annotations, including bookmarks, highlights,
text notes, and drawings, tap Annotations in the navigation menu.
You can tap an entry in the list to go to the annotated page.
94
Using Companion Pr ograms
When you finish reading a book, you can delete it to conserve space on
your device. If a copy of the book is stored on your computer, you can
download it again at any time.
To remove a book from your device, tap and hold the title in the Library
list, and tap Delete on the pop-up menu.
U s i n g C o m p a n i on Pro g r a m s
95
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Removing a Book
96
Using Companion Pr ograms
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
9
SECTION 9
Using Microsoft®
Pocket Internet
Explorer
Mobile Favorites
Using AvantGo Channels
Browsing Mobile Favorites and the Web
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Use Pocket Internet Explorer to view Web or WAP pages:
•
During synchronization with your computer, download your favorite
links and mobile favorites that are stored in the Mobile Favorites
subfolder in Internet Explorer on your computer.
•
Connect to an Internet service provider (ISP) or network and browse
the Web. For more information on connecting to the Internet, see
"Getting Connected" on page 105.
When the device is connected to an ISP or network, you can also
download files and programs from the Internet or intranet.
To switch to Pocket Internet Explorer, tap the Start button and tap
Internet Explorer.
Mobile Favorites
If you are using Microsoft Internet Explorer 5.0 or later on your computer,
you can download mobile favorites to your device. Synchronizing mobile
favorites downloads Web content to your device so that you can view
pages while you are disconnected from your ISP and computer. Use the
Internet Explorer plug-in installed with Microsoft ActiveSync® to create
mobile favorites quickly.
To create a mobile favorite on your computer and download it to your
device:
1
On your computer, open Internet Explorer and click Tools→ Create
Mobile Favorite.
2
To change the link name, enter a new name in the Name box.
3
Specify an update schedule next to Update (optional).
4
Click OK.
Internet Explorer downloads the latest version of the page to your
computer.
98
Using Microsof t ® Po cke t I nt e r net E x p lo re r
In Internet Explorer on the computer, right-click the mobile favorite
and click Properties.
6
On the Download tab, specify the number of levels deep you want to
download. To conserve device memory, go only one level deep.
7
Synchronize your device and computer.
Mobile favorites that are stored in the Mobile Favorites folder in
Internet Explorer are downloaded to your device.
If you did not specify an update schedule in step 3, you need to manually
download content to keep the information updated on your computer and
device. Before synchronizing with your device, click Tools in Internet
Explorer on your computer and click Synchronize. The date in the Last
Updated column was the last time content was downloaded to the
computer. You can manually download content, if necessary.
NOTE: You can add an icon to the Internet Explorer toolbar for
creating mobile favorites. In Internet Explorer on your computer,
click View→Toolbars, and then click Customize.
Conserving Memory
Mobile favorites take up storage memory on your device. To minimize the
amount of memory used:
•
Turn off pictures and sounds or stop some mobile favorites from
being downloaded to the device in the Favorites settings in the
ActiveSync options. For more information, see ActiveSync Help on
your computer.
•
Limit the number of downloaded linked pages. In Internet Explorer
on the computer, right-click the mobile favorite you want to change
and click Properties. On the Download tab, specify 0 or 1 for the
number of linked pages you want to download.
U s i n g M ic r o s o f t ® Po c k et Int er ne t E x pl o re r
99
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
5
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Mobile Favorites Folder
Only items stored in the Mobile Favorites subfolder (in the Favorites
folder) in Internet Explorer on your computer are synchronized with your
device. The folder was created automatically when you installed
ActiveSync.
Favorite Links
During synchronization, the list of favorites in the Mobile Favorites folder
on your computer is synchronized with Pocket Internet Explorer on your
device. The computer and the device are updated with changes made to
either list each time you synchronize. Unless you mark the favorite link as
a mobile favorite, only the link is downloaded to your device—you need to
connect to your ISP or network to view the content. For more information
on synchronization, see ActiveSync Help on your computer.
Using AvantGo Channels
AvantGo is a free interactive service that gives you access to personalized
content and thousands of popular websites. You subscribe to AvantGo
channels directly from your device. Then synchronize your device and
computer, or connect to the Internet to download the content. For more
information, see the AvantGo website.
To sign up for AvantGo:
1
In ActiveSync options on your computer, turn on synchronization for
the AvantGo information type.
2
In Pocket Internet Explorer on your device, tap Favorites to display
your list of favorites.
3
Tap the AvantGo Channels link.
4
Tap Activate.
100
Using Microsof t ® Po cke t I nt e r net E x p lo re r
Follow the directions on the screen.
You need to synchronize your device with your computer and then
tap the My Channels to complete the AvantGo setup.
When synchronization is complete, tap the AvantGo Channels link in
your list of favorites to see a few of the most popular channels. To add or
remove channels, tap the Add or Remove link.
Browsing Mobile Favorites and the
Web
You can use Pocket Internet Explorer to browse mobile favorites and
channels that you have downloaded to your device without connecting to
the Internet. You can also connect to the Internet through an ISP or a
network connection and browse the Web.
U s i n g M ic r o s o f t ® Po c k et Int er ne t E x pl o re r
101
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
5
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
back icon
refresh icon
home icon
favorites icon
102
Using Microsof t ® Po cke t I nt e r net E x p lo re r
1
Tap the favorites icon to display your list of favorites.
2
Tap the page you want to view.
The page that was downloaded the last time you synchronized with your
computer appears. If the page is not on your device, the favorite is
dimmed. You need to synchronize with your computer again to download
the page to your device, or connect to the Internet to view the page.
To browse the Internet, set up a connection to your ISP or corporate
network using Connections, as described in "Getting Connected" on
page 105.
NOTE: To add a favorite link, go to the page that you want to add,
tap and hold the page, and then tap Add to Favorites.
To connect and browse the Internet:
•
Tap the favorites icon and tap the favorite you want to view.
•
Tap View and tap Address Bar. In the address bar that appears at the
top of the screen, enter the Web address that you want to see and tap
Go. Tap the arrow to select previously entered addresses.
U s i n g M ic r o s o f t ® Po c k et Int er ne t E x pl o re r
103
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
To view mobile favorites and channels:
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
104
Using Microsof t ® Po cke t I nt e r net E x p lo re r
10
SECTION 10
Getting Connected
Using Infrared
Creating a Modem Connection
Creating an Ethernet Connection
Creating a VPN Connection
Ending a Connection
Connecting Directly to an E-Mail Server
Getting Help on Connecting
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
You can use your device to exchange information with other mobile
devices or with a computer, a network, or the Internet. You can use any of
the following connection options:
•
Use the infrared (IR) port on your device to send and receive files
between two devices. See the following section, "Using Infrared," for
more information.
•
Connect to your Internet service provider (ISP). Once you are
connected, you can send and receive e-mail messages by using Inbox,
and view Web or WAP pages by using Microsoft® Pocket Internet
Explorer. The communication software for creating an ISP
connection is already installed on your device. Your service provider
provides software needed to install other services, such as paging and
fax services.
•
Connect to the network at your company or organization where you
work. Once you are connected, you can send and receive e-mail
messages by using Inbox, view Web or WAP pages by using Pocket
Internet Explorer, and synchronize with your computer.
•
Connect to your computer to synchronize remotely. Once you are
connected, you can synchronize information such as your Pocket
Outlook information. See Microsoft ActiveSync® Help on your
computer or Connections Help on the device for more information.
Using Infrared
Using infrared, you can send and receive information, such as contacts
and appointments, between two devices.
To send information:
1
Switch to the program where you created the item you want to send
and locate the item in the list.
2
Align the infrared sensors so that they are unobstructed and within a
close range.
3
Tap and hold the item, and tap Beam Item on the pop-up menu.
106
G e t t i n g C on n e c t e d
Creating a Modem Connection
1
Obtain the following information from your ISP:
–
ISP dial-up access telephone number
–
Username and password
–
TCP/IP settings
Some ISPs require information in front of the username, such as
MSN/username.
2
Install a modem card, or use a null modem cable and appropriate
adapters to connect an external modem to your device through the
serial port.
3
Tap the Start button→ Settings→ Connections tab→ Connections.
4
Under My ISP or My Work Network, tap Add a new modem
connection.
5
Enter a name for the connection, such as ISP Connection.
6
From the Select a modem list, select your modem type, and tap
Next.
If your modem type does not appear, try reinserting the modem card.
If you are using an external modem that is connected to your device
with a cable, select Hayes Compatible on COM1.
7
Enter the access phone number and tap Next.
8
Enter your user name, password, and, if applicable, your domain.
NOTE: You should not need to change any settings in Advanced.
Most ISPs now use a dynamically assigned address.
9
If the ISP you are connecting to does not use a dynamically assigned
address, tap Advanced, tap the TCP/IP tab, and then enter the
address.
Getting Connected
107
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
You can also send items (excluding folders) from File Explorer. Tap and
hold the item you want to send, and tap Beam File on the pop-up menu.
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
10
Tap Next.
11
Select other appropriate options and tap Finish.
When you open Inbox, Pocket Internet Explorer, or MSN Messenger, your
device automatically connects. Once you are connected, you can:
•
Send and receive e-mail messages using Inbox. Before you can use
Inbox, you need to provide the information Inbox needs to
communicate with the e-mail server. See "Connecting Directly to an
E-Mail Server" on page 111 for more information.
•
See Web and WAP pages using Pocket Internet Explorer. For more
information, see "Using Microsoft® Pocket Internet Explorer" on
page 97.
•
Send and receive instant messages with MSN Messenger. For more
information, see "MSN Messenger" on page 89.
Creating an Ethernet Connection
1
Install the network card driver, if required.
See the documentation that came with your network card.
2
Insert the network card into your device.
•
If a network with a broadcast SSID is detected, the wireless
network icon,
, and the New Network Detected bubble
appear in the navigation bar. Go to step 3.
•
3
If a network with a broadcast SSID is not detected, skip to
step 4.
Tap The Internet or Work, depending to which type of network you
are connecting. Your device automatically connects to the network.
NOTE: If multiple networks are detected, tap the network to which
you want to connect, tap The Internet or Work, and tap Connect.
4
108
Tap the Start button→ Settings→ Connections tab→ Connections.
G e t t i n g C on n e c t e d
Tap the Wireless Ethernet icon.
6
On the Wireless tab, tap New Settings.
7
Enter the SSID next to Network Name, and select whether the
network connects to the Internet or work.
8
Tap the Authentication tab to enable or disable WEP settings,
depending on your network type.
9
Tap OK.
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
5
When your device successfully connects to the network, your
connection status appears under Wireless Networks.
Creating a VPN Connection
1
Tap the Start button→ Settings→ Connections tab→ Connections.
2
Tap Add a new VPN server connection.
3
Enter a name for the connection, such as your company's name.
4
In the Host name/IP field, enter the VPN server name or IP address.
5
Next to VPN type, tap IPSec or PPTP, depending on the type of
authentication that you want to use with your device.
If you are unsure about which option to select, ask your network
administrator.
6
Tap Next.
7
Enter your username, password, and, if required, domain.
8
Install the network card driver, if required.
See the documentation that came with your network card.
9
Insert the network card into your device.
•
If a network with a broadcast SSID is detected, the wireless
network icon,
, and the New Network Detected bubble
appear in the navigation bar. Go to step 10.
Getting Connected
109
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
•
10
If a network with a broadcast SSID is not detected, skip to
step 11.
Tap The Internet.
NOTE: If multiple networks are detected, tap the network to which
you want to connect, tap The Internet, and tap Connect.
11
Tap the Start button→ Settings→ Connections tab→ Connections.
12
Tap the Wireless Ethernet icon.
13
On the Wireless tab, tap New Settings.
14
Enter the SSID next to Network Name, and tap The Internet.
15
Tap the Authentication tab to enable or disable WEP settings,
depending on your network type.
16
Tap OK.
17
Tap the connection icon,
18
Tap the name of your VPN connection to enable it.
, that
appears in the navigation bar.
Ending a Connection
To disconnect:
•
When connected through dial-up or VPN, tap the Connection icon
on your navigation bar and tap End.
•
When connected through a cable or cradle, detach your device from
the cable or cradle.
•
When connected through the infrared sensor, move the device away
from the computer.
•
When connected through a network (Ethernet) card, remove the
card from your device.
110
G e t t i n g C on n e c t e d
You can set up a connection to an e-mail server so that you can send and
receive e-mail messages by using a modem or network connection and
Inbox on your device.
NOTE: The ISP or network must use a POP3 or IMAP4 e-mail
server and an SMTP gateway.
You can use multiple e-mail services to receive your messages. For each
e-mail service you intend to use, you must first set up and name the
e-mail service. If you use the same service to connect to different
mailboxes, set up and name each mailbox connection.
To set up an e-mail service:
1
In Inbox on your device, tap Accounts and tap New Account.
2
Follow the directions in the E-mail Setup wizard.
For more information, tap the Start button and tap Help.
To connect to your e-mail server, tap Services and tap Connect. For more
information on using the Inbox program, see "Inbox" on page 70.
Getting Help on Connecting
For more information on getting connected, see the following resources:
•
"Inbox" on page 70.
•
Online Help on the device. Tap the Start button and tap Help. Tap
View, tap All Installed Help, and then tap Inbox or Connections.
•
ActiveSync Help on your computer. In ActiveSync, click Help and
click Microsoft ActiveSync Help.
•
See www.microsoft.com/mobile/pocketpc for troubleshooting
information.
Getting Connected
111
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Connecting Directly to an E-Mail
Server
112
G e t t i n g C on n e c t e d
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
11
SECTION 11
Appendix
Specifications
Regulatory Notices
Contacting Dell
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Specifications
System Information
Intel® XScale™ processor at
400 or 300 MHz
Processor
Memory
RAM
64- or 32-MB SDRAM
ROM
48- or 32-MB Intel® StrataFlash™ ROM
Operating System
Microsoft® Pocket PC 2003 Premium
Display
Type
TFT Color 16-bit, touch-sensitive
transflective display
Size
3.5 inches
Resolution
240 x 320 at 65,536 colors
Controls and Lights
Navigation
5-way navigation button
Scroll Dial
up, down, action
Buttons:
four program buttons: Calendar,
Contacts, Inbox, Home
power on/off
voice record button
reset button
Lights:
synchronization/communication
event notification
charge status
114
Appendix
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Expansion Slots
CompactFlash
one Type II CompactFlash card
slot (3.3v)
Secure Digital
one Secure Digital card slot (3.3v)
Ports and Connectors
Infrared
standard v1.2 (115 kbps)
Power
DC power in
Cradle/synchronization connector
40-pin connector
Audio
stereo headphone connector
Physical
Dimensions:
Length
128 mm (5.04 inches)
Width
81.5 mm (3.21 inches)
Height
18 mm (0.71 inch)
Weight
196 g (0.43 lb)
Audio
Audio controller
AC-97 Codec chip; WM9705 sound
chip
Stereo conversion
16-bit stereo; 8.0, 11.025, 22.05 and
44.1KHz sample rate
Record
full duplex record and playback
Microphone/speaker
integrated
Headphone
stereo connector
Appendix
115
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Power Supply
Battery type:
Main
1440-mAh Lithium-ion removable,
rechargeable battery (standard)
3400-mAh Lithium-ion removable,
rechargeable battery (optional)
Backup
CR2032 lithium battery
AC adapter:
Supply voltage
100–240 VAC
Frequency
50–60 Hz
Current consumption
0.4 A
Output voltage
5.4 VDC
Output current
2.41 A
Environmental
Temperature range:
operating
0° to 40°C (32° to 104°F)
storage
–20° to 60°C (–4° to 140°F)
Thermal gradient:
operating
15°C (59°F) per hour maximum
storage
20°C (68°F) per hour maximum
Relative humidity (maximum):
operating
10% to 90% non-condensing
storage
5% to 95% non-condensing
Altitude (maximum):
operating
0 to 3048 m (0 to 10,000 ft)
storage
0 to 12,190 m (0 to 40,000 ft)
116
Appendix
Maximum shock:
operating
200 G
storage
400 G
Maximum vibration:
operating
2.6 GRMS
storage
3.41 GRMS
Regulatory Notices
Electromagnetic Interference (EMI) is any signal or emission, radiated in
free space or conducted along power or signal leads, that endangers the
functioning of a radio navigation or other safety service or seriously
degrades, obstructs, or repeatedly interrupts a licensed radio
communications service. Radio communications services include but are
not limited to AM/FM commercial broadcast, television, cellular services,
radar, air-traffic control, pager, and Personal Communication Services
(PCS). These licensed services, along with unintentional radiators such as
digital devices, including computers, contribute to the electromagnetic
environment.
Electromagnetic Compatibility (EMC) is the ability of items of electronic
equipment to function properly together in the electronic environment.
While this computer has been designed and determined to be compliant
with regulatory agency limits for EMI, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause interference with radio communications services, which can be
determined by turning the equipment off and on, you are encouraged to
try to correct the interference by one or more of the following measures:
•
Reorient the receiving antenna.
•
Relocate the computer with respect to the receiver.
•
Move the computer away from the receiver.
Appendix
117
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Environmental (continued)
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
•
Plug the computer into a different outlet so that the computer and
the receiver are on different branch circuits.
If necessary, consult a Dell Technical Support representative or an
experienced radio/television technician for additional suggestions.
Dell™ computers are designed, tested, and classified for their intended
electromagnetic environment. These electromagnetic environment
classifications generally refer to the following harmonized definitions:
•
Class A is typically for business or industrial environments.
•
Class B is typically for residential environments.
Information Technology Equipment (ITE), including devices, expansion
cards, printers, input/output (I/O) devices, monitors, and so on, that are
integrated into or connected to the computer should match the
electromagnetic environment classification of the computer.
A Notice About Shielded Signal Cables: Use only shielded cables for
connecting devices to any Dell device to reduce the possibility of
interference with radio communications services. Using shielded cables
ensures that you maintain the appropriate EMC classification for the
intended environment. For parallel printers, a cable is available from
Dell. If you prefer, you can order a cable from Dell on the World Wide
Web at accessories.us.dell.com/sna/category.asp?category_id=4117.
Most Dell computers are classified for Class B environments. However,
the inclusion of certain options can change the rating of some
configurations to Class A. To determine the electromagnetic classification
for your computer or device, see the following sections specific for each
regulatory agency. Each section provides country-specific EMC/EMI or
product safety information.
118
Appendix
Most Dell computers are classified by the Federal Communications
Commission (FCC) as Class B digital devices. To determine which
classification applies to your computer, examine all FCC registration
labels located on the bottom, side, or back panel of your computer, on
card-mounting brackets, and on the cards themselves. If any one of the
labels carries a Class A rating, your entire computer is considered to be a
Class A digital device. If all labels carry an FCC Class B rating as
distinguished by either an FCC ID number or the FCC logo, ( ), your
computer is considered to be a Class B digital device.
Once you have determined your computer’s FCC classification, read the
appropriate FCC notice. Note that FCC regulations provide that changes
or modifications not expressly approved by Dell could void your authority
to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
•
This device may not cause harmful interference.
•
This device must accept any interference received, including
interference that may cause undesired operation.
Class A
This equipment has been tested and found to comply with the limits for a
Class A digital device pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the manufacturer’s instruction
manual, may cause harmful interference with radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference, in which case you will be required to correct the interference
at your own expense.
Appendix
119
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
FCC Notices (U.S. Only)
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Class B
This equipment has been tested and found to comply with the limits for a
Class B digital device pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance
with the manufacturer’s instruction manual, may cause interference with
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, you are encouraged to
try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and the receiver.
•
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
•
Consult the dealer or an experienced radio/television technician for
help.
FCC Identification Information
The following information is provided on the device or devices covered in
this document in compliance with FCC regulations:
•
Model number: HC01U
•
Company name:
Dell Computer Corporation
One Dell Way
Round Rock, Texas 78682 USA
512-338-4400
120
Appendix
The Telephone Consumer Protection Act of 1991 makes it unlawful for
any person to use a computer or other electronic device, including fax
machines, to send any message unless such message clearly contains in a
margin at the top or bottom of each transmitted page or on the first page
of the transmission, the date and time it is sent, identification of the
business, other entity, or individual sending the message, and the
telephone number of the sending machine or such business, other entity,
or individual. The telephone number provided may not be a 900 number
or any other number for which charges exceed local or long-distance
transmission charges.
IC Notice (Canada Only)
Most Dell computers (and other Dell digital apparatus) are classified by
the Industry Canada (IC) Interference-Causing Equipment Standard #3
(ICES-003) as Class B digital devices. To determine which classification
(Class A or B) applies to your computer (or other Dell digital apparatus),
examine all registration labels located on the bottom, side, or the back
panel of your computer (or other digital apparatus). A statement in the
form of "IC Class A ICES-003" or "IC Class B ICES-003" will be located
on one of these labels. Note that Industry Canada regulations provide that
changes or modifications not expressly approved by Dell could void your
authority to operate this equipment.
This Class B (or Class A, if so indicated on the registration label) digital
apparatus meets the requirements of the Canadian InterferenceCausing Equipment Regulations.
Cet appareil numérique de la Classe B (ou Classe A, si ainsi indiqué sur
l’étiquette d’enregistration) respecte toutes les exigences du Reglement
sur le Materiel Brouilleur du Canada.
Appendix
121
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Fax Branding
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
CE Notice (European Union)
Marking by the symbol
indicates compliance of this Dell computer to
the EMC Directive and the Low Voltage Directive of the European
Union. Such marking is indicative that this Dell system meets the
following technical standards:
•
EN 55022 — "Information Technology Equipment — Radio
Disturbance Characteristics — Limits and Methods of
Measurement."
•
EN 55024 — "Information Technology Equipment - Immunity
Characteristics - Limits and Methods of Measurement."
•
EN 61000-3-2 — "Electromagnetic Compatibility (EMC) - Part 3:
Limits - Section 2: Limits for Harmonic Current Emissions
(Equipment Input Current Up to and Including 16 A Per Phase)."
•
EN 61000-3-3 — "Electromagnetic Compatibility (EMC) - Part 3:
Limits - Section 3: Limitation of Voltage Fluctuations and Flicker in
Low-Voltage Supply Systems for Equipment With Rated Current Up
to and Including 16 A."
•
EN 60950 — "Safety of Information Technology Equipment."
NOTE: EN 55022 emissions requirements provide for two classifications:
•
Class A is for typical commercial areas.
•
Class B is for typical domestic areas.
This Dell device is classified for use in a typical Class B domestic
environment.
A "Declaration of Conformity" in accordance with the preceding directives
and standards has been made and is on file at Dell Computer Corporation
Products Europe BV, Limerick, Ireland.
CE Mark Notice
This equipment complies with the essential requirements of the
European Union Directive 1999/5/EC.
122
Appendix
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
123
Appendix
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
EN 55022 Compliance (Czech Republic Only)
This device belongs to Class B devices as described in EN 55022, unless
it is specifically stated that it is a Class A device on the specification
label. The following applies to devices in Class A of EN 55022 (radius of
protection up to 30 meters). The user of the device is obliged to take all
steps necessary to remove sources of interference to telecommunication
or other devices.
MIC Notice (Republic of Korea Only)
To determine which classification (Class A or B) applies to your computer
(or other Dell digital device), examine the Republic of Korean Ministry of
Information and Communications (MIC) registration labels located on
your computer (or other Dell digital device). The MIC label may be
located separately from the other regulatory marking applied to your
product. Line two of the label identifies the emissions class for the
product—"(A)" for Class A products or "(B)" for Class B products.
NOTE: MIC emissions requirements provide for two classifications:
•
Class A devices are for business purposes.
•
Class B devices are for nonbusiness purposes.
124
Appendix
Please note that this device has been approved for business purposes with
regard to electromagnetic interference. If you find that this device is not
suitable for your use, you may exchange it for a nonbusiness-purpose
device.
MIC Class A Regulatory Label
If the regulatory label includes the following marking, your computer is a
Class A product:
Class B Device
Appendix
125
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Class A Device
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Please note that this device has been approved for nonbusiness purposes
and may be used in any environment, including residential areas.
MIC Class B Regulatory Label
If the regulatory label includes the following marking, your computer is a
Class B product.
126
Appendix
The following information is provided on the device(s) described in this
document in compliance with the requirements of the official Mexican
standards (NOM):
Exporter:
Dell Computer Corporation
One Dell Way
Round Rock, TX 78682
Importer:
Dell Computer de México,
S.A. de C.V.
Paseo de la Reforma 2620 - 11° Piso
Col. Lomas Altas
11950 México, D.F.
Ship to:
Dell Computer de México,
S.A. de C.V. al Cuidado de Kuehne &
Nagel de México S. de R.I.
Avenida Soles No. 55
Col. Peñon de los Baños
15520 México, D.F.
Model number:
HC01U
Supply voltage:
100–240 VAC
Frequency:
50–60 Hz
Current Consumption:
0.4 A
Output voltage:
5.4 VDC
Output current:
2.41 A
Appendix
127
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
NOM Information (Mexico Only)
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Contacting Dell
To contact Dell electronically, you can access the following websites:
•
www.dell.com
•
support.dell.com (technical support)
•
premiersupport.dell.com (technical support for educational,
government, healthcare, and medium/large business customers,
including Premier, Platinum, and Gold customers)
For specific web addresses for your country, find the appropriate country
section in the table below.
NOTE: Toll-free numbers are for use within the country for which they are
listed.
When you need to contact Dell, use the electronic addresses, telephone
numbers, and codes provided in the following table. If you need assistance
in determining which codes to use, contact a local or an international
operator.
128
Appendix
Department Name or Service
Area,
Website and E-Mail Address
Australia (Sydney)
E-mail (Australia):
au_tech_support@dell.com
International Access
Code: 0011
Country Code: 61
City Code: 2
Area Codes,
Local Numbers,
and
Toll-Free Numbers
E-mail (New Zealand):
nz_tech_support@dell.com
Home and Small Business
1-300-65-55-33
Government and Business
toll-free: 1-800-633559
Preferred Accounts Division
(PAD)
toll-free: 1-800-060889
Customer Care
toll-free: 1-800-819339
Corporate Sales
toll-free: 1-800-808385
Transaction Sales
toll-free: 1-800-808312
Fax
toll-free: 1-800-818341
Appendix
129
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Country (City)
International
Access Code
Country Code
City Code
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Country (City)
International
Access Code
Country Code
City Code
Department Name or Service
Area,
Website and E-Mail Address
Austria (Vienna)
Website: support.euro.dell.com
International Access
Code: 900
E-mail:
tech_support_central_europe@d
ell.com
Country Code: 43
City Code: 1
Home/Small Business Sales
0820 240 530 00
Home/Small Business Fax
0820 240 530 49
Home/Small Business Customer
Care
0820 240 530 14
Preferred Accounts/Corporate
Customer Care
0820 240 530 16
Home/Small Business Technical
Support
0820 240 530 14
Preferred Accounts/Corporate
Technical Support
Switchboard
Belgium (Brussels)
Website: support.euro.dell.com
International Access
Code: 00
E-mail: tech_be@dell.com
Country Code: 32
City Code: 2
130
Appendix
Area Codes,
Local Numbers,
and
Toll-Free Numbers
0660 8779
0820 240 530 00
E-mail for French Speaking
Customers:
support.euro.dell.com/be/fr/email
dell/
Technical Support
02 481 92 88
Customer Care
02 481 91 19
Corporate Sales
02 481 91 00
Fax
02 481 92 99
Switchboard
02 481 91 00
Department Name or Service
Area,
Website and E-Mail Address
Canada (North York,
Ontario)
Online Order Status:
www.dell.ca/ostatus
International Access
Code: 011
AutoTech (automated technical
support)
toll-free: 1-800-2479362
TechFax
toll-free: 1-800-9501329
Customer Care (Home
Sales/Small Business)
toll-free: 1-800-8474096
Customer Care (med./large
business, government)
toll-free: 1-800-3269463
Technical Support (Home
Sales/Small Business)
toll-free: 1-800-8474096
Technical Support (med./large
bus., government)
toll-free: 1-800-3875757
Sales (Home Sales/Small
Business)
toll-free: 1-800-3875752
Sales (med./large bus.,
government)
toll-free: 1-800-3875755
Spare Parts Sales & Extended
Service Sales
Czech Republic
(Prague)
Website: support.euro.dell.com
International Access
Code: 00
Technical Support
Country Code: 420
City Code: 2
Area Codes,
Local Numbers,
and
Toll-Free Numbers
1 866 440 3355
E-mail: czech_dell@dell.com
02 2186 27 27
Customer Care
02 2186 27 11
Fax
02 2186 27 14
TechFax
02 2186 27 28
Switchboard
02 2186 27 11
Appendix
131
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Country (City)
International
Access Code
Country Code
City Code
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Country (City)
International
Access Code
Country Code
City Code
Department Name or Service
Area,
Website and E-Mail Address
Denmark
(Copenhagen)
Website: support.euro.dell.com
International Access
Code: 00
Country Code: 45
Area Codes,
Local Numbers,
and
Toll-Free Numbers
E-mail Support (portable
computers):
den_nbk_support@dell.com
E-mail Support (desktop
computers):
den_support@dell.com
E-mail Support (servers):
Nordic_server_support@dell.com
132
Appendix
Technical Support
7023 0182
Customer Care (Relational)
7023 0184
Home/Small Business Customer
Care
3287 5505
Switchboard (Relational)
3287 1200
Fax Switchboard (Relational)
3287 1201
Switchboard (Home/Small
Business)
3287 5000
Fax Switchboard (Home/Small
Business)
3287 5001
Department Name or Service
Area,
Website and E-Mail Address
Finland (Helsinki)
Website: support.euro.dell.com
International Access
Code: 990
E-mail: fin_support@dell.com
Area Codes,
Local Numbers,
and
Toll-Free Numbers
Country Code: 358
E-mail Support (servers):
Nordic_support@dell.com
City Code: 9
Technical Support
09 253 313 60
Technical Support Fax
09 253 313 81
Relational Customer Care
09 253 313 38
Home/Small Business Customer
Care
09 693 791 94
Fax
09 253 313 99
Switchboard
09 253 313 00
Appendix
133
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Country (City)
International
Access Code
Country Code
City Code
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Country (City)
International
Access Code
Country Code
City Code
Department Name or Service
Area,
Website and E-Mail Address
France (Paris)
(Montpellier)
Website: support.euro.dell.com
Area Codes,
Local Numbers,
and
Toll-Free Numbers
International Access
Code: 00
E-mail:
support.euro.dell.com/fr/fr/email
dell/
Country Code: 33
Home and Small Business
City Codes: (1) (4)
Technical Support
0825 387 270
Customer Care
0825 823 833
Switchboard
0825 004 700
Switchboard (calls from outside
of France)
04 99 75 40 00
Sales
0825 004 700
Fax
0825 004 701
Fax (calls from outside of France)
04 99 75 40 01
Corporate
134
Appendix
Technical Support
0825 004 719
Customer Care
0825 338 339
Switchboard
01 55 94 71 00
Sales
01 55 94 71 00
Fax
01 55 94 71 01
Department Name or Service
Area,
Website and E-Mail Address
Germany (Langen)
Website: support.euro.dell.com
International Access
Code: 00
E-mail:
tech_support_central_europe@d
ell.com
Country Code: 49
City Code: 6103
Technical Support
06103 766-7200
Home/Small Business Customer
Care
0180-5-224400
Global Segment Customer Care
06103 766-9570
Preferred Accounts Customer
Care
06103 766-9420
Large Accounts Customer Care
06103 766-9560
Public Accounts Customer Care
06103 766-9555
Switchboard
06103 766-7000
Greece
Website: support.euro.dell.com
International Access
Code: 00
E-mail:
support.euro.dell.com/gr/en/email
dell/
Country Code: 30
Area Codes,
Local Numbers,
and
Toll-Free Numbers
Technical Support
Gold Technical Support
080044149518
08844140083
Switchboard
2108129800
Sales
2108129800
Fax
2108129812
Appendix
135
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Country (City)
International
Access Code
Country Code
City Code
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Country (City)
International
Access Code
Country Code
City Code
Department Name or Service
Area,
Website and E-Mail Address
Area Codes,
Local Numbers,
and
Toll-Free Numbers
Ireland (Cherrywood) Website: support.euro.dell.com
International Access
Code: 16
E-mail:
dell_direct_support@dell.com
Country Code: 353
Ireland Technical Support
City Code: 1
U.K. Technical Support (dial
within U.K. only)
Home User Customer Care
01 204 4014
Small Business Customer Care
01 204 4014
U.K. Customer Care (dial within
U.K. only)
Corporate Customer Care
Corporate Customer Care (dial
within U.K. only)
Ireland Sales
U.K. Sales (dial within U.K. only)
136
Appendix
1850 543 543
0870 908 0800
0870 906 0010
1850 200 982
0870 907 4499
01 204 4444
0870 907 4000
Fax/SalesFax
01 204 0103
Switchboard
01 204 4444
Department Name or Service
Area,
Website and E-Mail Address
Italy (Milan)
Website: support.euro.dell.com
International Access
Code: 00
E-mail:
support.euro.dell.com/it/it/email
dell/
Country Code: 39
City Code: 02
Area Codes,
Local Numbers,
and
Toll-Free Numbers
Home and Small Business
Technical Support
02 577 826 90
Customer Care
02 696 821 14
Fax
02 696 821 13
Switchboard
02 696 821 12
Corporate
Technical Support
02 577 826 90
Customer Care
02 577 825 55
Fax
02 575 035 30
Switchboard
02 577 821
Appendix
137
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Country (City)
International
Access Code
Country Code
City Code
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Country (City)
International
Access Code
Country Code
City Code
Department Name or Service
Area,
Website and E-Mail Address
Japan (Kawasaki)
Website: support.jp.dell.com
International Access
Code: 001
Technical Support (servers)
Country Code: 81
Technical Support outside of
Japan (servers)
City Code: 44
81-44-556-4162
toll-free: 0120-198226
Technical Support outside of
Japan (Dimension and Inspiron)
81-44-520-1435
Technical Support outside of
Japan (Dell Precision, OptiPlex,
and Latitude)
Appendix
toll-free: 0120-198498
Technical Support (Dimension™
and Inspiron™)
Technical Support (Dell
Precision™, OptiPlex™, and
Latitude™)
138
Area Codes,
Local Numbers,
and
Toll-Free Numbers
toll-free:0120-198433
81-44-556-3894
Faxbox Service
044-556-3490
24-Hour Automated Order
Service
044-556-3801
Customer Care
044-556-4240
Business Sales Division (up to 400
employees)
044-556-1465
Preferred Accounts Division Sales
(over 400 employees)
044-556-3433
Large Corporate Accounts Sales
(over 3500 employees)
044-556-3430
Public Sales (government
agencies, educational institutions,
and medical institutions)
044-556-1469
Global Segment Japan
044-556-3469
Individual User
044-556-1760
Switchboard
044-556-4300
Department Name or Service
Area,
Website and E-Mail Address
Korea (Seoul)
Technical Support
International Access
Code: 001
toll-free: 080-2003800
Sales
toll-free: 080-2003600
Customer Service (Seoul, Korea)
toll-free: 080-2003800
Country Code: 82
City Code: 2
Customer Service (Penang,
Malaysia)
604 633 4949
Fax
2194-6202
Switchboard
2194-6000
Luxembourg
Website: support.euro.dell.com
International Access
Code: 00
E-mail: tech_be@dell.com
Country Code: 352
Area Codes,
Local Numbers,
and
Toll-Free Numbers
Technical Support (Brussels,
Belgium)
Home/Small Business Sales
(Brussels, Belgium)
3420808075
toll-free: 080016884
Corporate Sales (Brussels,
Belgium)
02 481 91 00
Customer Care (Brussels,
Belgium)
02 481 91 19
Fax (Brussels, Belgium)
02 481 92 99
Switchboard (Brussels, Belgium)
02 481 91 00
Malaysia (Penang)
Technical Support
International Access
Code: 00
tollfree: 1 800 888 298
Customer Service
04 633 4949
Country Code: 60
Transaction Sales
tollfree: 1 800 888 202
Corporate Sales
tollfree: 1 800 888 213
City Code: 4
Appendix
139
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Country (City)
International
Access Code
Country Code
City Code
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Country (City)
International
Access Code
Country Code
City Code
Department Name or Service
Area,
Website and E-Mail Address
Mexico
Customer Technical Support
International Access
Code: 00
Country Code: 52
Area Codes,
Local Numbers,
and
Toll-Free Numbers
001-877-384-8979
or 001-877-269-3383
Sales
50-81-8800
or 01-800-888-3355
Customer Service
001-877-384-8979
or 001-877-269-3383
Main
50-81-8800
or 01-800-888-3355
Netherlands Antilles
140
Appendix
General Support
001-800-882-1519
Department Name or Service
Area,
Website and E-Mail Address
Netherlands
(Amsterdam)
Website: support.euro.dell.com
International Access
Code: 00
(Enterprise):
nl_server_support@dell.com
Country Code: 31
City Code: 20
Area Codes,
Local Numbers,
and
Toll-Free Numbers
E-mail (Technical Support):
(Latitude):
nl_latitude_support@dell.com
(Inspiron):
nl_inspiron_support@dell.com
(Dimension):
nl_dimension_support@dell.com
(OptiPlex):
nl_optiplex_support@dell.com
(Dell Precision):
nl_workstation_support@dell.co
m
Technical Support
020 674 45 00
Technical Support Fax
020 674 47 66
Home/Small Business Customer
Care
020 674 42 00
Relational Customer Care
020 674 4325
Home/Small Business Sales
020 674 55 00
Relational Sales
020 674 50 00
Home/Small Business Sales Fax
020 674 47 75
Relational Sales Fax
020 674 47 50
Switchboard
020 674 50 00
Switchboard Fax
020 674 47 50
Appendix
141
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Country (City)
International
Access Code
Country Code
City Code
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Country (City)
International
Access Code
Country Code
City Code
Department Name or Service
Area,
Website and E-Mail Address
New Zealand
E-mail (New Zealand):
nz_tech_support@dell.com
International Access
Code: 00
Country Code: 64
Area Codes,
Local Numbers,
and
Toll-Free Numbers
E-mail (Australia):
au_tech_support@dell.com
Home and Small Business
0800 446 255
Government and Business
0800 444 617
Sales
0800 441 567
Fax
0800 441 566
Norway (Lysaker)
Website: support.euro.dell.com
International Access
Code: 00
E-mail Support (portable
computers):
Country Code: 47
nor_nbk_support@dell.com
E-mail Support (desktop
computers):
nor_support@dell.com
E-mail Support (servers):
nordic_server_support@dell.com
142
Appendix
Technical Support
671 16882
Relational Customer Care
671 17514
Home/Small Business Customer
Care
23162298
Switchboard
671 16800
Fax Switchboard
671 16865
Department Name or Service
Area,
Website and E-Mail Address
Singapore (Singapore) Technical Support
International Access
Code: 005
Country Code: 65
Customer Service (Penang,
Malaysia)
604 633 4949
tollfree: 800 6011 054
Corporate Sales
tollfree: 800 6011 053
Website: support.euro.dell.com
International Access
Code: 00
E-mail:
support.euro.dell.com/es/es/email
dell/
City Code: 91
tollfree: 800 6011 051
Transaction Sales
Spain (Madrid)
Country Code: 34
Area Codes,
Local Numbers,
and
Toll-Free Numbers
Home and Small Business
Technical Support
902 100 130
Customer Care
902 118 540
Sales
902 118 541
Switchboard
902 118 541
Fax
902 118 539
Corporate
Technical Support
902 100 130
Customer Care
902 118 546
Switchboard
91 722 92 00
Fax
91 722 95 83
Appendix
143
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Country (City)
International
Access Code
Country Code
City Code
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Country (City)
International
Access Code
Country Code
City Code
Department Name or Service
Area,
Website and E-Mail Address
Sweden (Upplands
Vasby)
Website: support.euro.dell.com
International Access
Code: 00
E-mail Support for Latitude and
Inspiron:
Swe-nbk_kats@dell.com
Country Code: 46
City Code: 8
Area Codes,
Local Numbers,
and
Toll-Free Numbers
E-mail: swe_support@dell.com
E-mail Support for OptiPlex:
Swe_kats@dell.com
E-mail Support for Servers:
Nordic_server_support@dell.com
Technical Support
08 590 05 199
Relational Customer Care
08 590 05 642
Home/Small Business Customer
Care
08 587 70 527
Employee Purchase Program
(EPP) Support
144
Appendix
20 140 14 44
Fax Technical Support
08 590 05 594
Sales
08 590 05 185
Department Name or Service
Area,
Website and E-Mail Address
Area Codes,
Local Numbers,
and
Toll-Free Numbers
Switzerland (Geneva) Website: support.euro.dell.com
International Access
Code: 00
Country Code: 41
City Code: 22
Turks and Caicos
Islands
E-mail: swisstech@dell.com
E-mail for French-speaking HSB
and Corporate Customers:
support.euro.dell.com/ch/fr/email
dell/
Technical Support (Home and
Small Business)
0844 811 411
Technical Support (Corporate)
0844 822 844
Customer Care (Home and Small
Business)
0848 802 202
Customer Care (Corporate)
0848 821 721
Fax
022 799 01 90
Switchboard
022 799 01 01
General Support
toll-free: 1-866-5403355
Appendix
145
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Country (City)
International
Access Code
Country Code
City Code
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Country (City)
International
Access Code
Country Code
City Code
Department Name or Service
Area,
Website and E-Mail Address
Area Codes,
Local Numbers,
and
Toll-Free Numbers
U.K. (Bracknell)
Website: support.euro.dell.com
International Access
Code: 00
Customer Care website:
support.euro.dell.com/uk/en/ECare/Form/Home.asp
Country Code: 44
City Code: 1344
146
Appendix
E-mail:
dell_direct_support@dell.com
Technical Support
(Corporate/Preferred
Accounts/PAD [1000+
employees])
0870 908 0500
Technical Support (direct/PAD
and general)
0870 908 0800
Global Accounts Customer Care
01344 373 186
Home and Small Business
Customer Care
0870 906 0010
Corporate Customer Care
01344 373 185
Preferred Accounts (500–5000
employees) Customer Care
0870 906 0010
Central Government Customer
Care
01344 373 193
Local Government & Education
Customer Care
01344 373 199
Health Customer Care
01344 373 194
Home and Small Business Sales
0870 907 4000
Corporate/Public Sector Sales
01344 860 456
Department Name or Service
Area,
Website and E-Mail Address
U.S.A. (Austin, Texas) Automated Order-Status Service
International Access
Code: 011
Country Code: 1
AutoTech (portable and desktop
computers)
Area Codes,
Local Numbers,
and
Toll-Free Numbers
toll-free: 1-800-4339014
toll-free: 1-800-2479362
Consumer (Home and Home Office)
Technical Support
toll-free: 1-800-6249896
Customer Service
toll-free: 1-800-6249897
DellNet™ Service and Support
toll-free: 1-877-Dellnet
(1-877-335-5638)
Employee Purchase Program
(EPP) Customers
toll-free: 1-800-6958133
Financial Services website:
www.dellfinancialservices.com
Financial Services (lease/loans)
toll-free: 1-877-5773355
Financial Services (Dell Preferred
Accounts [DPA])
toll-free: 1-800-2832210
Business
Customer Service and Technical
Support
toll-free: 1-800-8228965
Employee Purchase Program
(EPP) Customers
toll-free: 1-800-6958133
Projectors Technical Support
toll-free: 1-877-4597298
Public (government, education, and healthcare)
Appendix
147
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Country (City)
International
Access Code
Country Code
City Code
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Country (City)
International
Access Code
Country Code
City Code
Department Name or Service
Area,
Website and E-Mail Address
Area Codes,
Local Numbers,
and
Toll-Free Numbers
Customer Service and Technical
Support
toll-free: 1-800-4563355
Employee Purchase Program
(EPP) Customers
toll-free: 1-800-2341490
Dell Sales
toll-free: 1-800-2893355
or toll-free: 1-800879-3355
Dell Outlet Store (Dell
refurbished computers)
toll-free: 1-888-7987561
Software and Peripherals Sales
toll-free: 1-800-6713355
Spare Parts Sales
toll-free: 1-800-3573355
Extended Service and Warranty
Sales
toll-free: 1-800-2474618
Fax
toll-free: 1-800-7278320
Dell Services for the Deaf, Hardof-Hearing, or Speech-Impaired
toll-free: 1-877DELLTTY
(1-877-335-5889)
148
Appendix
Dell-branded hardware products purchased in the U.S. or Canada come with either a 90-day,
1-year, 2-year, 3-year, or 4-year limited warranty. To determine which warranty came with
your hardware product(s), see your packing slip or invoice. The following sections describe
the limited warranties and return policy for the U.S., the limited warranties and return policy
for Canada, the manufacturer guarantee for Latin America and the Caribbean, and the
Intel® Pentium® and Celeron® warranty for the U.S. and Canada.
Limited Warranty for Dell-Branded Hardware Products
(U.S. Only)
What is covered by this limited warranty?
This limited warranty covers defects in materials and workmanship in your—our end-user
customer's—Dell-branded hardware products, including Dell-branded peripheral products.
What is not covered by this limited warranty?
This limited warranty does not cover:
•
Software, including the operating system and software added to the Dell-branded
hardware products through our factory-integration system, third-party software, or the
reloading of software
•
Non-Dell-branded and Solution Provider Direct products and accessories
•
Problems that result from:
–
External causes such as accident, abuse, misuse, or problems with electrical
power
–
Servicing not authorized by Dell
–
Usage that is not in accordance with product instructions
–
Failure to follow the product instructions or failure to perform preventive
maintenance
–
Problems caused by using accessories, parts, or components not supplied by Dell
•
Products with missing or altered Service Tags or serial numbers
•
Products for which Dell has not received payment
Limited Wa r r anties and Re tu r n Po licy
149
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Limited Warranties and Return Policy
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO
HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE (OR
JURISDICTION TO JURISDICTION). DELL'S RESPONSIBILITY FOR
MALFUNCITONS AND DEFECTS IN HARDWARE IS LIMITED TO REPAIR AND
REPLACEMENT AS SET FORTH IN THIS WARRANTY STATEMENT. ALL
EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING BUT
NOT LIMITED TO ANY IMPLIED WARRANTIES AND CONDITIONS OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE
LIMITED IN TIME TO THE TERM OF THE LIMITED WARRANTY PERIOD
REFLECTED ON YOUR PACKING SLIP OR INVOICE. NO WARRANTIES,
WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE LIMITED
WARRANTY PERIOD HAS EXPIRED. SOME STATES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THIS
LIMITATION MAY NOT APPLY TO YOU.
WE DO NOT ACCEPT LIABILITY BEYOND THE REMEDIES PROVIDED FOR IN
THIS LIMITED WARRANTY OR FOR CONSEQUENTIAL OR INCIDENTAL
DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY LIABILTY FOR THIRDPARTY CLAIMS AGAINST YOU FOR DAMAGES, FOR PRODUCTS NOT BEING
AVAILABLE FOR USE, OR FOR LOST DATA OR LOST SOFTWARE. OUR
LIABILITY WILL BE NO MORE THAN THE AMOUNT YOU PAID FOR THE
PRODUCT THAT IS THE SUBJECT OF A CLAIM. THIS IS THE MAXIMUM
AMOUNT FOR WHICH WE ARE RESPONSIBLE.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION
OR EXCLUSION MAY NOT APPLY TO YOU.
How long does this limited warranty last?
This limited warranty lasts for the time period indicated on your packing slip or invoice,
except that the limited warranty on Dell-branded batteries lasts only 1 year and the limited
warranty on the lamps for Dell-branded projectors lasts only 90 days. The limited warranty
begins on the date of the packing slip or invoice. The warranty period is not extended if we
repair or replace a warranted product or any parts. Dell may change the availability of limited
warranties, at its discretion, but any changes will not be retroactive.
150
Limited Wa r ranties and Re tu r n Po licy
Before the warranty expires, please call us at the relevant number listed in the following
table. Please also have your Dell Service Tag or order number available.
Individual Home Consumers:
U.S. Only
Technical Support
1-800-624-9896
Customer Service
1-800-624-9897
Individual Home Consumers who purchased
through an Employee Purchase Program:
Technical Support and Customer Service
1-800-822-8965
Home and Small Business Commercial Customers:
Technical Support and Customer Service
1-800-456-3355
Medium, Large, or Global Commercial Customers,
Healthcare Customers, and Value-Added Resellers
(VARs):
Technical Support and Customer Service
1-800-822-8965
Government and Education Customers:
Technical Support and Customer Service
1-800-234-1490
Dell-Branded Memory
1-888-363-5150
What will Dell do?
During the 90 days of the 90-day limited warranty and the first year of all other limited
warranties: During the 90 days of the 90-day limited warranty and the first year of all other
limited warranties, we will repair any Dell-branded hardware products returned to us that
prove to be defective in materials or workmanship. If we are not able to repair the product,
we will replace it with a comparable product that is new or refurbished.
When you contact us, we will issue a Return Material Authorization Number for you to
include with your return. You must return the products to us in their original or equivalent
packaging, prepay shipping charges, and insure the shipment or accept the risk if the product
is lost or damaged in shipment. We will return the repaired or replacement products to you.
We will pay to ship the repaired or replaced products to you if you use an address in the
United States (excluding Puerto Rico and U.S. possessions and territories). Otherwise, we
will ship the product to you freight collect.
If we determine that the product is not covered under this warranty, we will notify you and
inform you of service alternatives that are available to you on a fee basis.
Limited Wa r r anties and Re tu r n Po licy
151
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
What do I do if I need warranty service?
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
NOTE: Before you ship the product(s) to us, make sure to back up the data on the hard
drive(s) and any other storage device(s) in the product(s). Remove any confidential,
proprietary, or personal information and removable media such as floppy disks, CDs, or PC
Cards. We are not responsible for any of your confidential, proprietary, or personal
information; lost or corrupted data; or damaged or lost removable media.
During the remaining years: For the remaining period of the limited warranty, we will replace
any defective part with new or refurbished parts, if we agree that it needs to be replaced.
When you contact us, we will require a valid credit card number at the time you request a
replacement part, but we will not charge you for the replacement part as long as you return
the original part to us within 30 days after we ship the replacement part to you. If we do not
receive the original part within 30 days, we will charge to your credit card the then-current
standard price for that part.
We will pay to ship the part to you if you use an address in the United States (excluding
Puerto Rico and U.S. possessions and territories). Otherwise, we will ship the part freight
collect. We will also include a prepaid shipping container with each replacement part for
your use in returning the replaced part to us.
NOTE: Before you replace parts, make sure to back up the data on the hard drive(s) and any
other storage device(s) in the product(s). We are not responsible for lost or corrupted data.
What if I purchased a service contract?
If your service contract is with Dell, service will be provided to you under the terms of the
service agreement. Please refer to that contract for details on how to obtain service.
If you purchased through us a service contract with one of our third-party service providers,
please refer to that contract for details on how to obtain service.
How will you fix my product?
We use new and refurbished parts made by various manufacturers in performing warranty
repairs and in building replacement parts and systems. Refurbished parts and systems are
parts or systems that have been returned to Dell, some of which were never used by a
customer. All parts and systems are inspected and tested for quality. Replacement parts and
systems are covered for the remaining period of the limited warranty for the product you
bought. Dell owns all parts removed from repaired products.
May I transfer the limited warranty?
Limited warranties on systems may be transferred if the current owner transfers ownership of
the system and records the transfer with us. The limited warranty on Dell-branded memory
may not be transferred. You may record your transfer by going to Dell's website:
•
152
If you are an Individual Home Consumer, go to
www.dell.com/us/en/dhs/topics/sbtopic_015_ccare.htm
Limited Wa r ranties and Re tu r n Po licy
If you are a Home Office, Small, Medium, Large, or Global Commercial Customer, go
to www.dell.com/us/en/biz/topics/sbtopic_ccare_nav_015_ccare.htm
•
If you are a Government, Education, or Healthcare Customer, or an Individual Home
Consumer who purchased through an Employee Purchase Program, go to
www.dell.com/us/en/pub/topics/sbtopic_015_ccare.htm
If you do not have Internet access, call your customer care representative or
call 1-800-624-9897.
"Total Satisfaction" Return Policy (U.S. Only)
We value our relationship with you and want to make sure that you're satisfied with your
purchases. That's why we offer a "Total Satisfaction" return policy for most products that
you—the end-user customer—purchase directly from Dell. Under this policy, you may return
to Dell products that you purchased directly from Dell for a credit or a refund of the
purchase price paid, less shipping and handling and applicable restocking fees as follows:
•
New Hardware Products and Accessories — All new hardware, accessories, parts, and
unopened software still in its sealed package, excluding the products listed below, may
be returned within 30 days from the date on the packing slip or invoice. To return
applications software or an operating system that has been installed by Dell, you must
return the entire computer. A different return policy applies to nondefective products
purchased through Dell's Software and Peripherals division by customers of our Small
and Medium Business divisions. Those products may be returned within 30 days from
the date on the packing slip or invoice, but a fifteen percent (15%) restocking fee will
be deducted from any refund or credit. The "Total Satisfaction" Return Policy and
Software and Peripherals division return policy are not available for Dell | EMC
storage products, EMC-branded products, or enterprise software.
•
Reconditioned or Refurbished Dell-Branded Hardware Products and Parts — All
reconditioned or refurbished Dell-branded server and storage products may be
returned within 30 days from the date on the packing slip or invoice. All other
reconditioned or refurbished Dell-branded hardware products and parts may be
returned within 14 days of the date on the packing slip or invoice.
To return products, e-mail or call Dell customer service to receive a Credit Return
Authorization Number within the return policy period applicable to the product you want to
return. You must obtain a Credit Return Authorization Number in order to return the
product. See "Contacting Dell" or "Getting Help" in your customer documentation (or
www.dell.com/us/en/gen/contact.htm) to find the appropriate contact information for
obtaining customer assistance.
You must ship the products to Dell within 5 days of the date that Dell issues the Credit
Return Authorization Number. You must also return the products to Dell in their original
packaging, in as-new condition along with any media, documentation, and all other items
that were included in the original shipment, prepay shipping charges, and insure the
shipment or accept the risk of loss or damage during shipment.
Limited Wa r r anties and Re tu r n Po licy
153
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
•
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Limited Warranty Terms for Dell-Branded Hardware Products
(Canada Only)
What is covered by this limited warranty?
This limited warranty covers defects in materials and workmanship in your—our end-user
customer's—Dell-branded hardware products, including Dell-branded peripheral products.
What is not covered by this limited warranty?
This limited warranty does not cover:
•
Software, including the operating system and software added to the Dell-branded
hardware products through our factory-integration system, or the reloading of the
software
•
Non-Dell branded and Solution Provider Direct products and accessories
•
Problems that result from:
–
External causes such as accident, abuse, misuse, or problems with electrical
power
–
Servicing not authorized by Dell
–
Usage that is not in accordance with product instructions
–
Failure to follow the product instructions or failure to perform preventive
maintenance
–
Problems caused by using accessories, parts, or components not supplied by Dell
•
Products with missing or altered Service Tags or serial numbers
•
Products for which Dell has not received payment
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO
HAVE OTHER RIGHTS WHICH VARY FROM PROVINCE TO PROVINCE. DELL'S
RESPONSIBILITY FOR MALFUNCTIONS AND DEFECTS IN PRODUCT IS LIMITED
TO REPAIR AND REPLACEMENT AS SET FORTH IN THIS WARRANTY
STATEMENT, FOR THE TERM OF THE WARRANTY PERIOD REFLECTED ON
YOUR PACKING SLIP OR INVOICE. EXCEPT FOR THE EXPRESS WARRANTIES
CONTAINED IN THIS WARRANTY STATEMENT, DELL DISCLAIMS ALL OTHER
WARRANTIES AND CONDITIONS, EXPRESS OR IMPLIED, INCLUDING WITHOUT
LIMITATION IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, STATUTORY OR OTHERWISE.
SOME PROVINCES DO NOT ALLOW THE EXCLUSION OF CERTAIN IMPLIED
WARRANTIES OR CONDITIONS, OR LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY OR CONDITION LASTS. THEREFORE, THE FOREGOING
EXCLUSIONS AND LIMITATIONS MAY NOT APPLY TO YOU.
154
Limited Wa r ranties and Re tu r n Po licy
SOME PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, SO THE
ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
How long does this limited warranty last?
This limited warranty lasts for the time period indicated on your packing slip or invoice,
except that the limited warranty on Dell-branded batteries lasts only 1 year and the limited
warranty on the lamps for Dell-branded projectors lasts only 90 days. The limited warranty
begins on the date of the packing slip or invoice. The warranty period is not extended if we
repair or replace a warranted product or any parts. Dell may change the terms and availability
of limited warranties, at its discretion, but any changes will not be retroactive (that is, the
warranty terms in place at the time of purchase will apply to your purchase).
Limited Wa r r anties and Re tu r n Po licy
155
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
WE DO NOT ACCEPT LIABILITY BEYOND THE REMEDIES PROVIDED FOR IN
THIS WARRANTY STATEMENT OR FOR SPECIAL, INDIRECT, CONSEQUENTIAL,
OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY LIABILTY
FOR THIRD-PARTY CLAIMS AGAINST YOU FOR DAMAGES, FOR PRODUCTS NOT
BEING AVAILABLE FOR USE, OR FOR LOST DATA OR LOST SOFTWARE. OUR
LIABILITY WILL BE NO MORE THAN THE AMOUNT YOU PAID FOR THE
PRODUCT THAT IS THE SUBJECT OF A CLAIM. THIS IS THE MAXIMUM AMOUNT
FOR WHICH WE ARE RESPONSIBLE.
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
What do I do if I need warranty service?
Before the warranty expires, please call us at the relevant number listed in the following
table. Please also have your Dell Service Tag or order number available.
Individual Home Consumers; Home Office and
Small Business Customers:
Canada Only
Technical Support and Customer Service
1-800-847-4096
Medium, Large, and Global Commercial Customers;
Government, Education, and Healthcare
Customers; and Value-Added Resellers (VARs):
Technical Support
1-800-387-5757
Customer Service
1-800-326-9463
Government or Education Customers, or Individual
Home Consumers who purchased through an
Employee Purchase Program:
Technical Support
1-800-387-5757
Customer Service
1-800-326-9463 (Extension
8221 for Individual
Consumers)
Dell-Branded Memory
1-888-363-5150
What will Dell do?
During the 90 days of the 90-day limited warranty and the first year of all other limited
warranties: During the 90 days of the 90-day limited warranty and the first year of all other
limited warranties, we will repair any Dell-branded hardware products returned to us that
prove to be defective in materials or workmanship. If we are not able to repair the product,
we will replace it with a comparable product that is new or refurbished.
When you contact us, we will issue a Return Material Authorization Number for you to
include with your return. You must return the products to us in their original or equivalent
packaging, prepay shipping charges, and insure the shipment or accept the risk if the product
is lost or damaged in shipment. We will return the repaired or replacement products to you.
We will pay to ship the repaired or replaced products to you if you use an address in Canada.
Otherwise, we will ship the product to you freight collect.
If we determine that the problem is not covered under this warranty, we will notify you and
inform you of service alternatives that are available to you on a fee basis.
156
Limited Wa r ranties and Re tu r n Po licy
During the remaining years following the first year of all limited warranties: We will replace
any defective part with new or refurbished parts, if we agree that it needs to be replaced.
When you contact us, we will require a valid credit card number at the time you request a
replacement part, but we will not charge you for the replacement part as long as you return
the original part to us within 30 days after we ship the replacement part to you. If we do not
receive the original part within 30 days, we will charge to your credit card the then-current
standard price for that part.
We will pay to ship the part to you if you use an address in Canada. Otherwise, we will ship
the part freight collect. We will also include a prepaid shipping container with each
replacement part for your use in returning the replaced part to us.
NOTE: Before you replace parts, make sure to back up the data on the hard drive(s) and any
other storage device(s) in the product(s). We are not responsible for lost or corrupted data.
What if I purchased a service contract?
If your service contract is with Dell, service will be provided to you under the terms of the
service contract. Please refer to that contract for details on how to obtain service. Dell's
service contracts can be found online at www.dell.ca or by calling Customer Care at 1-800847-4096. If you purchased through us a service contract with one of our third-party service
providers, please refer to that contract (mailed to you with your packing slip or invoice) for
details on how to obtain service.
How will you fix my product?
We use new and refurbished parts made by various manufacturers in performing warranty
repairs and in building replacement parts and systems. Refurbished parts and systems are
parts or systems that have been returned to Dell, some of which were never used by a
customer. All parts and systems are inspected and tested for quality. Replacement parts and
systems are covered for the remaining period of the limited warranty for the product you
bought. Dell owns all parts removed from repaired products.
May I transfer the limited warranty?
Limited warranties on systems may be transferred if the current owner transfers ownership of
the system and records the transfer with us. The limited warranty on Dell-branded memory
may not be transferred. You may record your transfer by going to Dell’s website:
Limited Wa r r anties and Re tu r n Po licy
157
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
NOTE: Before you ship the product(s) to us, make sure to back up the data on the hard
drive(s) and any other storage device(s) in the product(s). Remove any confidential,
proprietary or personal information, removable media, such as floppy disks, CDs, or PC
Cards. We are not responsible for any of your confidential, proprietary or personal
information; lost or corrupted data; or damaged or lost removable media.
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
•
For Canada-purchased computers (in-country transfers) and to transfer from one
customer to another, go to
www.dell.ca/ca/en/gen/topics/segtopic_ccare_nav_013_ccare.htm
•
For out-of-country transfers (outside of the original country of purchase), go to
www.dell.com/us/en/biz/topics/sbtopic_ccare_nav_016_ccare.htm
If you do not have Internet access, call Dell at 1-800-847-4096 (Home Consumer customers)
or 1-800-326-9463 (Corporate Commercial or Government customers).
"Total Satisfaction" Return Policy (Canada Only)
If you are an end-user customer who bought new products directly from Dell, you may return
them to Dell up to 30 days after you receive them for a refund or credit of the product
purchase price. If you are an end-user customer who bought reconditioned or refurbished
products from Dell, you may return them to Dell within 14 days after the date on the
packing slip or invoice for a refund or credit of the product purchase price. In either case, the
refund or credit will not include any shipping and handling charges shown on your packing
slip or invoice and will be subject to a fifteen percent (15%) restocking fee, unless otherwise
prohibited by law. If you are an organization that bought the products under a written
agreement with Dell, the agreement may contain different terms for the return of products
than specified by this policy.
To return products, you must call Dell Customer Service at 1-800-847-4096 to receive a
Credit Return Authorization Number. To expedite the process of your refund or credit, Dell
expects you to return the products to Dell in their original packaging within 5 days of the
date that Dell issues the Credit Return Authorization Number. You must also prepay
shipping charges and insure the shipment or accept the risk of loss or damage during
shipment. You may return software for a refund or credit only if the sealed package
containing the floppy disk(s) or CD(s) is unopened. Returned products must be in as-new
condition, and all of the manuals, floppy disk(s), CD(s), power cables, and other items
included with a product must be returned with it. For customers who want to return, for
refund or credit only, either application or operating system software that has been installed
by Dell, the whole system must be returned, along with any media and documentation that
may have been included in the original shipment.
The "Total Satisfaction" Return Policy does not apply to Dell | EMC storage products. It also
does not apply to products purchased through Dell's Software and Peripherals division. For
those products, please instead refer to Dell's Software and Peripheral's then-current return
policy (see the following section, "Dell Software and Peripherals (Canada Only)").
158
Limited Wa r ranties and Re tu r n Po licy
Third-Party Software and Peripherals Products
Similar to other resellers of software and peripherals, Dell does not warrant third-party
products. Third-party software and peripheral products are covered by the warranties
provided by the original manufacturer or publisher only. Third-party manufacturer
warranties vary from product to product. Consult your product documentation for specific
warranty information. More information may also be available from the manufacturer or
publisher.
While Dell offers a wide selection of software and peripheral products, we do not specifically
test or guarantee that all of the products we offer work with any or all of the various models
of Dell computers, nor do we test or guarantee all of the products we sell on the hundreds of
different brands of computers available today. If you have questions about compatibility, we
recommend and encourage you to contact the third-party software and peripheral product
manufacturer or publisher directly.
Dell-Branded Peripheral Products
Dell does provide a limited warranty for new Dell-branded peripheral products (products for
which Dell is listed as the manufacturer) such as monitors, batteries, memory, docking
stations, and projectors. To determine which limited warranty applies to the product you
purchased, see the Dell packing slip or invoice and/or the product documentation that
accompanied your product. Descriptions of Dell's limited warranties are described in
preceding sections.
Return Policy
If you are an end-user customer who bought Dell Software and Peripherals products directly
from a Dell company, you may return Dell Software and Peripherals products that are in asnew condition to Dell up to 30 days from the date on the packing slip or invoice for a refund
of the product purchase price if already paid. This refund will not include any shipping and
handling charges shown on your packing slip or invoice; you are responsible for those.
To return products, you must call Dell Customer Service at 1-800-387-5759 to receive a
Credit Return Authorization Number. You must ship the Dell Software and Peripherals
products back to Dell in their original manufacturer's packaging (which must be in as-new
condition), prepay shipping charges, and insure the shipment or accept the risk of loss or
damage during shipment.
To qualify for refund or replacement, returned products must be in as-new condition,
software products must be unopened, and all of the manuals, floppy disk(s), CD(s), power
cables, and other items included with a product must be returned with it.
Limited Wa r r anties and Re tu r n Po licy
159
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Dell Software and Peripherals (Canada Only)
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
1-Year End-User Manufacturer Guarantee (Latin America and
the Caribbean Only)
Guarantee
Dell Computer Corporation ("Dell") warrants to the end user in accordance with the
following provisions that its branded hardware products, purchased by the end user from a
Dell company or an authorized Dell distributor in Latin America or the Caribbean, will be
free from defects in materials, workmanship, and design affecting normal use, for a period of
1 year from the original purchase date. Products for which proper claims are made will, at
Dell’s option, be repaired or replaced at Dell’s expense. Dell owns all parts removed from
repaired products. Dell uses new and reconditioned parts made by various manufacturers in
performing repairs and building replacement products.
Exclusions
This Guarantee does not apply to defects resulting from: improper or inadequate
installation, use, or maintenance; actions or modifications by unauthorized third parties or
the end user; accidental or willful damage; or normal wear and tear.
Making a Claim
Claims must be made in Latin America or the Caribbean by contacting the Dell point of sale
within the guarantee period. The end user must always supply proof of purchase, indicating
name and address of the seller, date of purchase, model and serial number, name and address
of the customer, and details of symptoms and configuration at the time of malfunction,
including peripherals and software used. Otherwise, Dell may refuse the guarantee claim.
Upon diagnosis of a warranted defect, Dell will make arrangements and pay for ground
freight and insurance to and from Dell’s repair/replacement center. The end user must
ensure that the defective product is available for collection properly packed in original or
equally protective packaging together with the details listed above and the return number
provided to the end user by Dell.
Limitation and Statutory Rights
Dell makes no other warranty, guarantee or like statement other than as explicitly stated
above, and this Guarantee is given in place of all other guarantees whatsoever, to the fullest
extent permitted by law. In the absence of applicable legislation, this Guarantee will be the
end user’s sole and exclusive remedy against Dell or any of its affiliates, and neither Dell nor
any of its affiliates shall be liable for loss of profit or contracts, or any other indirect or
consequential loss arising from negligence, breach of contract, or howsoever.
This Guarantee does not impair or affect mandatory statutory rights of the end user against
and/or any rights resulting from other contracts concluded by the end user with Dell and/or
any other seller.
160
Limited Wa r ranties and Re tu r n Po licy
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Dell World Trade LP
One Dell Way, Round Rock, TX 78682, USA
Dell Computadores do Brasil Ltda (CNPJ No. 72.381.189/0001-10)/
Dell Commercial do Brasil Ltda (CNPJ No. 03 405 822/0001-40)
Avenida Industrial Belgraf, 400
92990-000 - Eldorado do Sul – RS - Brasil
Dell Computer de Chile Ltda
Coyancura 2283, Piso 3- Of.302,
Providencia, Santiago - Chile
Dell Computer de Colombia Corporation
Carrera 7 #115-33 Oficina 603
Bogota, Colombia
Dell Computer de Mexico SA de CV
Paseo de la Reforma 2620 - 11° Piso
Col. Lomas Altas
11950 México, D.F.
Limited Wa r r anties and Re tu r n Po licy
161
162
Limited Wa r ranties and Re tu r n Po licy
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
B L U E T O O T H ™ — A wireless technology standard for short-range (10 m [30 ft])
networking devices that allows for enabled devices to automatically recognize each
other.
C O M P A C T F L A S H C A R D — A removable card that is used to expand the
capabilities of a device. Common types of CompactFlash cards include memory
and wireless cards.
C R A D L E — A device that allows your handheld device to synchronize with a
computer, recharge its battery, and run on AC power.
DHCP — dynamic host configuration protocol — A communication protocol
that allows network administrators to manage and automate the assignment of
Internet Protocol addresses to computers in a network.
IMAP — Internet message access protocol — A standard client/server protocol
that allows you to access your e-mail from a server. Using IMAP, you can store and
browse your e-mail on the server.
I N F R A R E D S E N S O R — A port that allows you to transfer data between the
computer and infrared-compatible devices without using a cable connection.
I S P — Internet service provider — A company that allows you to access its host
server to connect directly to the Internet, send and receive e-mail, and access
websites. The ISP typically provides you with a software package, username, and
access phone numbers for a fee.
LAN — local area network — A computer network covering a small area. A LAN
usually is confined to a building or a few nearby buildings. A LAN can be
connected to another LAN over any distance via telephone lines and radio waves
to form a wide area network (WAN).
PI M — personal information manager — A program that stores and organizes
your personal information, such as Calendar, Contacts, Inbox, and Tasks.
POP 3 — post office protocol 3 — A standard client/server protocol that allows
you to access your e-mail from a server. Using POP3, you must download your
e-mail to your local system to view and browse your messages.
R AM — random-access memory — The primary temporary storage area for
program instructions and data. Any information stored in RAM is lost when you
perform a reset.
R AS — remote access server — A type of server that allows users to access a
network from a remote location.
Glossar y
163
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Glossary
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
R OM — read-only memory — Memory that stores data and programs that
cannot be deleted or written to by the device. ROM, unlike RAM, retains its
contents after you perform a reset. Some programs essential to the operation of
your device reside in ROM.
SDRAM — synchronous dynamic random-access memory — A type of DRAM
that is synchronized with the optimal clock speed of the microprocessor.
S E C U R E D I G I T A L C A R D — A type of removable memory commonly used in
digital cameras, handheld devices, cell phones, and other devices. Secure Digital
cards are approximately the size of a postage stamp.
S E R I A L C O N N E C T O R — An I/O port often used to connect devices such as a
handheld digital device or digital camera to your computer.
SMS — short message service — A service that is capable of sending short
messages to wireless devices.
SMTP — simple mail transfer protocol — A type of protocol used for sending
and receiving e-mail. SMTP is typically coupled with POP3 or IMAP.
— A cable through which you can connect a handheld device to a
computer to transfer or synchronize files.
SYNC CABLE
— An automated process that replaces the files in one
location with the most updated files from another location. For example, you can
synchronize the files on your computer with the files on your handheld device.
SYNCHRONIZATION
TCP/IP — transmission control protocol/Internet protocol — The basic
communication language of the Internet. TCP/IP can also be used as a
communication protocol in an intranet or extranet.
USB — universal serial bus — A hardware interface for a low-speed device such
as a USB-compatible keyboard, mouse, joystick, scanner, set of speakers, printer,
broadband devices (DSL and cable modems), imaging devices, or storage devices.
Devices are plugged directly into a 4-pin socket on your computer or into a
multiport hub that plugs into your computer. USB devices can be connected and
disconnected while the computer is turned on, and they can also be daisy-chained
together.
V PN — virtual private network — A set of communication protocols that allows
remote users to securely access a network.
WAP — wireless application protocol — A standardization for the way that
wireless devices access the Internet.
164
Glossar y
Index
A
ActiveSync
about 57
installing 59
appointments
scheduling 63
audio
Media player 91
notifications 76
AvantGo
about 100
B
battery
backup 17
charging 18
main 16
using and installing 15
block recognizer 43
Bluetooth
cards 23
settings 55
books
library 92
Reader 91
books (continued)
reading ebooks 92
removing 95
buttons
about 28
Calendar 13
Contacts 13
Home 13
Inbox 13
locations 12
navigator 13
power 12
program buttons 31
record 13
reset 13
scroll dial 13
C
Calendar
about 62
appointments 63
meeting requests 64
command bar 33
communicating
with other devices 105
Index
165
CompactFlash
about 23
installing 23
slot 12
computer
connecting to 19
Contacts
about 65
creating 66
finding 66
cradle
connecting to a computer 19
D
data
backing up 37
e-mail (continued)
Inbox 70
message list 71
organizing 75
synchronizing 70
ethernet connection 108
Excel
about 86
tips 88
expansion slots
CompactFlash 23
locations 12
Secure Digital card slot 24
F
disconnecting
dial-up connection 110
from a cable or cradle 110
from a network 110
infrared sensor 110
files
backing up 37
File Explorer 80
finding 80
finding and organizing 36
synchronizing 57
drawing
creating 48
finding information 9
contacting Dell 128
E
H
editing
written text 45
help
ActiveSync Help 111
contacting Dell 128
finding 111
Pocket PC Help 9
e-mail
composing messages 73
connecting to a server 71 , 111
166
Index
I
meeting requests
creating 64
icons
program 32
status 30
memory
conserving 99
Inbox
about 70
microphone
recording a message 50
infrared
using 106
modem connection 107
input panel 40
Internet
connecting to 105
Internet Explorer
about 97
browsing the web 101
favorite links 100
mobile favorites 98 , 100
MSN Messenger
about 89
setting up 89
working with contacts 90
My Text
inserting 51
N
navigation bar 33
K
network
connecting to 105
keyboard
soft 42
Notes
creating 68
L
letter recognizer 42
notifications
about 76
P
M
Pocket Outlook
about 62
Media Player
about 91
Pocket PC
getting started 27
Index
167
pop-up menus 35
print-style text
converting written text to 42 , 43
programs
accessing 31
ActiveSync 57
adding and removing 77
adding programs using
ActiveSync 78
AvantGo 100
Calendar 62
Contacts 65
downloading 79
Inbox 70
Media Player 91
MSN Messenger 89
Notes 68
Pocket Excel 86
Pocket Internet Explorer 97
Pocket Outlook 62
Pocket Word 84
Reader 91
removing 81
Start menu 80
Switcher Bar 32
Tasks 67
R
Reader
about 91
features 93
168
Index
recording
voice messages 50
reminders. See notifications
reset
button 13
performing 24
resources
finding 9
S
scroll dial 13
Secure Digital card slot
about 24
installing cards 24
location 12
service tag 9 , 16
settings
adjusting 53
Connections tab 55
Personal tab 54
System tab 54
software. See programs
specifications 114
stylus
using 28
writing methods 39
Switcher Bar 32
sync cable
connecting to a computer 22
synchronizing
with your computer 19
V
T
VPN connection 109
Tasks
about 67
creating 67
W
text
converting written text to
print-style text 42 , 43
editing 44 , 45
input panel 40
typing 42
written 42 , 43 , 44
Today screen 28
transcriber 43
video
Media Player 91
warranty 149
Word
about 84
writing
block recognizer 43
converting written text to
print-style text 42 , 43
drawing 48
editing 44
letter recognizer 42
methods 39
on the screen 44
transcriber 43
Index
169
170
Index