Dell IN1920B Flat Panel Television User Manual

Dell™ IN1720/IN1920 Flat Panel Monitor User's Guide
About Your Monitor
Setting Up the Monitor
Operating the Monitor
Troubleshooting
Appendix
Notes, Notices, and Cautions
NOTE: A NOTE indicates important information that helps you make better use of your computer.
NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.
Information in this document is subject to change without notice.
© 2010 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.; Microsoft a n d Windows are either trademarks or registered trademarks of Microsoft Corporation in
the United States and/or other countries. ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency. As an ENERGY STAR partner, Dell Inc. has
determined that this product meets the ENERGY STAR guidelines for energy efficiency.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.
Model IN1720c/IN1920c/IN1920b/IN1920f
January 2010 Rev. A00
Back to Contents Page
About Your Monitor
Dell™ IN1720/IN1920 Flat Panel Monitor User's Guide Package Contents Product Features
Identifying Parts and Controls
Monitor Specifications
Plug and Play Capability
LCD Monitor Quality & Pixel Policy
Maintenance Guidelines
Package Contents
Your monitor ships with all the components shown below. Ensure that you have received all the components and Contact Dell™ if anything is missing.
NOTE: Some items may be optional and may not ship with your monitor. Some features or media may not be available in certain countries.
l
Monitor
l
Stand base
l
Power Cable
l
VGA Cable (attached to the monitor)
l
Drivers and Documentation media
Quick Setup Guide
Safety Information
l
l
Product Features
The Dell™ IN1720/IN1920 flat panel display has an active matrix, Thin-film Transistor, Liquid Crystal Display. The monitors features include:
■ IN1720: 17-inch (433.0 mm) viewable area display. 1440x900 resolution, plus full-screen support for lower resolutions.
■ IN1920: 18.5-inch (470.0 mm) viewable area display. 1366x768 resolution, plus full-screen support for lower resolutions.
■ Wide viewing angle to allow viewing from a sitting or standing position, or while moving from side-to-side.
■ Tilt adjustment capability.
■ Removable pedestal and Video Electronics Standards Association (VESA) 100mm mounting holes for flexible mounting solutions.
■ Plug and play capability if supported by your system.
■ On-Screen Display (OSD) adjustments for ease of set-up and screen optimization.
■ Software and documentation media which includes an information file (INF), Image Color Matching File (ICM), and product documentation.
■ Energy Saver feature for ENERGY STAR® compliance.
■ Security lock slot.
Identifying Parts and Controls
Front View
1.
Function buttons (For more information, see
Operating the Monitor)
2. Power On/Off button (with LED indicator)
Back View
Label Description
Use
1
Barcode serial number label
Refer to this label if you need to contact Dell for technical support.
2
Regulatory rating label
List the regulatory approvals.
3
VESA mounting holes (100mm)
To mount the monitor.
4
Security lock slot
Use a security lock with the slot to help secure your monitor.
5
Dell soundbar mounting brackets
(only for IN1920)
To attach the optional Dell Soundbar.
Side View
Left Side
Right Side
Bottom View
Label
Description
Use
1
AC power connector
To connect the monitor power cable.
2
VGA connector
To connect your computer to the monitor using a VGA cable.
Monitor Specifications
The following sections give you information about the various power management modes and pin assignments for the various connectors of your monitor.
Power Management Modes
If you have VESA's DPM compliance display card or software installed in your PC, the monitor automatically reduces its power consumption when not in use. This is
referred to as Power Save Mode. If the computer detects input from keyboard, mouse, or other input devices, the monitor automatically resumes functioning. The
following table shows the power consumption and signaling of this automatic power saving feature:
IN1720:
VESA Modes
Horizontal Sync
Vertical Sync
Video
Power Indicator
Power Consumption
Normal operation
Active
Active
Active
White
20 W(Typical)
/25 W(Maximum)
Active-off mode
Inactive
Inactive
Blank
Amber
Less than 2 W
Switch off
-
-
-
Off
Less than 1 W
VESA Modes
Horizontal Sync
Vertical Sync
Video
Power Indicator
Power Consumption
Normal operation
Active
Active
Active
White
19 W(Typical)
/23 W(Maximum)
Active-off mode
Inactive
Inactive
Blank
Amber
Less than 1 W
Switch off
-
-
-
Off
Less than 1 W
IN1920:
The OSD will only function in the normal operation mode. When any button except power button is pressed in Active-off mode, the following messages will be displayed:
Activate the computer and monitor to gain access to the OSD.
NOTE: Dell IN1720/IN1920 Flat Panel monitor is ENERGY STAR®-compliant.
Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.
Pin Assignments
15-pin D-Sub connector
Pin Number Monitor Side of the 15-pin Side Signal Cable
1
Video-Red
2
Video-Green
3
Video-Blue
4
GND
5
Self-test
6
GND-R
7
GND-G
8
GND-B
9
DDC +5V
10
GND-sync
11
GND
12
DDC data
13
H-sync
14
V-sync
15
DDC clock
Plug and Play Capability
You can install the monitor in any Plug and Play compatible system. The monitor automatically provides the computer with its Extended Display Identification Data
(EDID) using Display Data Channel (DDC) protocols so that the system can configure itself and optimize the monitor settings. Most monitor installations are automatic.
You can select different settings if required.
Flat Panel Specifications
Model number
Dell IN1720 Flat Panel Monitor
Dell IN1920 Flat Panel Monitor
Screen type
Active matrix - TFT LCD
Active matrix - TFT LCD
Panel Type
TN
TN
Screen dimensions
17 inches
(17-inch wide viewable image size)
18.5 inches
(18.5-inch wide viewable image size)
Preset display area:
l
Horizontal
367.2 mm (14.5 inches)
409.8 mm (16.1 inches)
l
Vertical
229.5 mm (9.04 inches)
230.4 mm (9.07 inches)
Pixel pitch
0.255 mm
0.300 mm
Viewing angle:
l
Horizontal
160° typical 160° typical l
Vertical
150° typical
160° typical
Luminance output
250 CD/m ² (typical)
250 CD/m ²(typical)
Contrast ratio
600 to 1 (typical)
1000 to 1 (typical)
Faceplate coating
Anti-glare
Anti-glare
Backlight
2 CCFL edgelight system
2 CCFL edgelight system
Response Time
8ms typical
5ms typical
Color Gamut
60% (typical)*
72% (typical)*
*Dell IN1720 Flat Panel monitor color gamut (typical) is based on CIE 1976 (65%) and CIE1931 (60%) test standards.
*Dell IN1920 Flat Panel monitor color gamut (typical) is based on CIE 1976 (83%) and CIE1931 (72%) test standards.
Resolution Specifications
Model number
Dell IN1720
Dell IN1920 Flat Panel Monitor
Scan range
l
Horizontal
30 kHz to 83 kHz (automatic)
30 kHz to 83 kHz (automatic)
l
Vertical
50 Hz to 75 Hz (automatic)
50 Hz to 75 Hz (automatic)
1440 x 900 at 60 Hz
1366 x 768 at 60 Hz
Maximum preset resolution
Electrical Specifications
Model number
Dell IN1720/IN1920 Flat Panel Monitor
Video input signals
Analog RGB: 0.7 Volts +/-5%, 75 ohm input
impedance Synchronization input signals
Separate horizontal and vertical
synchronizations, polarity-free TTL level, SOG
(Composite SYNC on green)
AC input voltage / frequency / current
100 to 240 VAC/50 or 60 Hz + 3 Hz/1.6A (Max.)
Inrush current
120V:30A (Max.)
240V:60A (Max.)
Preset Display Modes
The following table lists the preset modes for which Dell guarantees image size and centering:
IN1720:
Display Mode
Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
Pixel Clock (MHz)
Sync Polarity
(Horizontal/Vertical)
VESA, 720 x 400
31.5
70.0
28.3
-/+
VESA, 640 x 480
31.5
60.0
25.2
-/-
VESA, 640 x 480
37.5
75.0
31.5
-/-
VESA, 800 x 600
37.9
60.3
40.0
+/+
VESA, 800 x 600
46.9
75.0
49.5
+/+
VESA, 1024 x 768
48.4
60.0
65.0
-/-
VESA, 1024 x 768
60.0
75.0
78.8
+/+
VESA, 1152 x 864
67.5
75.0
108 .0
+/+
VESA, 1280 x 1024
64.0
60.0
108.0
+/+
VESA, 1280 x 1024
80.0
75.0
135.0
+/+
55.935
60.0
106.5
-/+
Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
Pixel Clock (MHz)
Sync Polarity
(Horizontal/Vertical)
VESA, 720 x 400
31.5
70.0
28.3
-/+
VESA, 640 x 480
31.5
60.0
25.2
-/-
VESA, 640 x 480
37.5
75.0
31.5
-/-
VESA, 800 x 600
37.9
60.0
40.0
+/+
VESA, 800 x 600
46.9
75.0
49.5
+/+
VESA, 1024 x 768
48.4
60.0
65.0
-/-
VESA, 1024 x 768
60.0
75.0
78.8
+/+
VESA, 1366 x 768
47.7
60.0
85.5
+/+
VESA, 1440 x 900
IN1920:
Display Mode
Physical Characteristics
The following table lists the monitor physical characteristics:
Model Number
Dell IN1720 Flat Panel Monitor
Dell IN1920 Flat Panel Monitor
Connector type
15-pin D-subminiature, blue connector;
15-pin D-subminiature, blue connector;
Signal cable type
Analog: Detachable, D-Sub, 15pins, shipped
attached to the monitor
Analog: Detachable, D-Sub, 15pins, shipped
attached to the monitor
Dimensions: (with stand)
l
Height
13.17 inches (334.58 mm)
13.36 inches (339.34 mm)
l
Width
15.91 inches (404.15 mm)
17.48 inches (443.99 mm)
l
Depth
6.17 inches (156.67 mm)
6.13 inches (155.70 mm)
Dimensions: (without stand)
l
Height 10.49 inches (266.45 mm)
10.42 inches (264.67 mm)
l
Width
15.91 inches (404.15 mm)
17.48 inches (443.99 mm)
l
Depth
2.17 inches (55.00 mm)
2.52 inches (64.01 mm)
Stand dimensions:
l
Height
4.72 inches (119.96 mm)
4.91 inches (124.71 mm)
l
Width
8.66 inches (219.92 mm)
9.84 inches (249.94 mm)
l
Depth
6.17 inches (156.67 mm)
6.13 inches (155.70 mm)
Weight with packaging
8.75 lbs (3.97 kg)
12.03 lbs (5.47 kg)
Weight with stand assembly and cables
6.03 lbs (2.74 kg)
8.51 lbs (3.87 kg)
Weight without stand assembly
(For wall mount or VESA mount
considerations - no cables)
5.04 lbs (2.29 kg)
6.73 lbs (3.06 kg)
Weight of stand assembly
0.75 lbs (0.34 kg)
1.54 lbs (0.70 kg) Environmental Characteristics
The following table lists the environmental conditions for your monitor:
Model Number
Dell IN1720 Flat Panel Monitor
Dell IN1920 Flat Panel Monitor
Temperature
l
Operating
0° to 40°C (32° to 104°F) 0° to 40°C (32° to 104°F) l
Non-operating
Storage: -20° to 60°C (-4° to 140°F)
Shipping: -20° to 60°C (-4° to 140°F)
Storage: -20° to 60°C (-4° to 140°F)
Shipping: -20° to 60°C (-4° to 140°F)
10% to 80% (non-condensing)
10% to 80% (non-condensing)
Storage: 5% to 90% (noncondensing)
Shipping: 5% to 90% (noncondensing)
Storage: 5% to 90% (noncondensing)
Shipping: 5% to 90% (noncondensing)
Humidity
l
Operating
l
Non-operating
Altitude
l
Operating
3,657.6m (12,000 ft) max
3,657.6m (12,000 ft) max
l
Non-operating
12,192m (40,000 ft) max
12,192m (40,000 ft) max
256.08 BTU/hour (maximum)
119.5 BTU/hour (typical)
71.82 BTU/hour (maximum)
64.98 BTU/hour (typical)
Thermal dissipation
LCD Monitor Quality & Pixel Policy
During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state. The visible result is a fixed pixel that
appears as an extremely tiny dark or bright discolored spot.When the pixel remains permanently lit, it is known as a “bright dot.” When the pixel remains black, it is
known as a “dark dot.”
In almost every case, these fixed pixels are hard to see and do not detract from display quality or usability. A display with 1 to 5 fixed pixels is considered normal and
within competitive standards. For more information, see Dell Support site at: support.dell.com.
Maintenance Guidelines
Caring for Your Monitor
CAUTION: Read and follow the safety instructions before cleaning the monitor. CAUTION: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet. For best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor:
l
l
l
l
l
To clean your antistatic screen, slightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or solution suitable for the
antistatic coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.
Use a slightly dampened, warm cloth to clean the plastics. Avoid using detergent of any kind as some detergents leave a milky film on the plastics. If you notice a white powder when you unpack your monitor, wipe it off with a cloth. This white powder occurs during the shipping of the monitor.
Handle your monitor with care as a darker-colored monitor may scratch and show white scuff marks more than a lighter-colored monitor. To help maintain the best image quality on your monitor, use a dynamically changing screen saver and power off your monitor when not in use.
Back to Contents Page
Back to Contents Page
Appendix
Dell™ IN1720/IN1920 Flat Panel Monitor User's Guide
Safety Instructions
FCC Notice (U.S. Only) and Other Regulatory Information
Contacting Dell
CAUTION: Safety Instructions
CAUTION: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock,
electrical hazards, and/or mechanical hazards.
For information on safety instructions, see the Product Information Guide.
FCC Notices (U.S. Only) and Other Regulatory Information
For FCC notices and other regulatory information, see the regulatory compliance website located at www.dell.com\regulatory_compliance.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions
(1) this device may not cause harmful interference
(2) this device must accept any interference received including interference that may cause undesired operation
Contacting Dell
For customers in the United States, call 800-WWW-DELL (800-999-3355).
NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill,
or Dell product catalog.
Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be
available in your area. To contact Dell for sales, technical support, or customer service issues:
1.
Visit support.dell.com.
2.
Verify your country or region in the Choose A Country/Region drop-down menu at the bottom of the page. 3.
Click Contact Us on the left side of the page.
4.
Select the appropriate service or support link based on your need.
5.
Choose the method of contacting Dell that is convenient for you.
Back to Contents Page
Back to Contents Page
Setting Up Your Monitor
Dell™ IN1720/IN1920 Flat Panel Monitor If you have a Dell™ desktop or a Dell™ portable computer with internet access
1. Go to http://support.dell.com, enter your service tag, and download the latest driver for your graphics card. 2. After installing the drivers for your graphics adapter, attempt to set the resolution to 1440 x 900 (for IN1720) or 1366 x 768 (for IN1920) again.
NOTE: If you are unable to set the resolution to 1440 x 900 (for IN1720) or 1366 x 768 (for IN1920), please contact Dell™ to inquire about a graphics adapter that supports these resolutions. Back to Contents Page
Back to Contents Page
Setting Up Your Monitor
Dell™ IN1720/IN1920 Flat Panel Monitor
If you have a non Dell™ desktop, portable computer, or graphics card
1. Right-click on the desktop and click Properties.
2. Select the Settings tab.
3. Select Advanced.
4. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.).
5. Refer to the graphic card provider website for updated driver (for example, http://www.ATI.com OR http://www.NVIDIA.com ).
6. After installing the drivers for your graphics adapter, attempt to set the resolution to 1440 x 900 (for IN1720) or 1366 x 768 (for IN1920) again.
NOTE: If you are unable to set the resolution to 1440 x 900 (for IN1720) or 1366 x 768 (for IN1920), please contact the manufacturer of your computer or
consider purchasing a graphics adapter that will support the video resolution of 1440 x 900 (for IN1720) or 1366 x 768 (for IN1920). Back to Contents Page
Back to Contents Page
Operating the Monitor
Dell™ IN1720/IN1920 Flat Panel Monitor User's Guide
Using the Front Panel Controls
Using the On-Screen Display (OSD) Menu
Setting the Maximum Resolution
Using the Dell Soundbar (Optional)
Using the Tilt
Power On the Monitor
Press the
button to turn on the monitor
Using the Front Panel Controls
Use the keys on the front of the monitor to adjust the image settings. Front panel Key
A
Description
Use the Preset modes key to choose from a list of preset color modes. See Using the OSD Menu.
Preset modes
B
Use the Brightness / Contrast key to direct access to the "Brightness" and "Contrast" control menu.
Brightness / Contrast
C
Use the Menu key to open the on-screen display (OSD).
Menu
D
Use the Exit key to exit on-screen display (OSD) from menu and sub-menus.
Exit
Front panel Key
Use the keys on the front of the monitor to adjust the image settings. Front panel Key
Description
A
Use the Up key to adjust (increase ranges) items in the OSD menu.
Up
B
Use the Down key to adjust (decrease ranges) items in the OSD menu.
Down
C
Use the OK key to confirm your selection.
OK
D
Use the Back key to go back to the previous menu.
Back
Using the On-Screen Display (OSD) Menu
Accessing the Menu System
NOTE: If you change the settings and then either proceed to another menu or exit the OSD menu, the monitor automatically saves those changes. The changes are also saved if you change the settings and then wait for the OSD menu to disappear.
1.
Press the
button to open the OSD menu and display the main menu.
Main Menu
2.
3.
4.
5.
6.
Press the
and
buttons to toggle between options in the Menu. As you move from one icon to another, the option name is highlighted.
To select the highlighted item on the menu press the
Press the
Press the
and
button again.
buttons to select the desired parameter.
button to enter the slide bar and then use the Select the
or
buttons, according to the indicators on the menu, to make your changes.
to return to previous menu without accepting current settings or
to accept and return to previous menu.
The table below provides a list of all the OSD menu options and their functions.
Icon
Menu and Submenus
Description
BRIGHTNESS/CONTRAST
Use the Brightness and Contrast menu to adjust the Brightness/Contrast.
Back
Brightness
Contrast
Press
to go back to the main menu.
Allows you to adjust the brightness or luminance of the backlight.
Press the
key to increase brightness and press the key to decrease brightness (min 0 ~ max 100).
Allows you to adjust the contrast or the degree of difference between darkness and lightness on the monitor screen. Adjust brightness first, a
contrast only if you need further adjustment.
Press the
Auto Adjust
key to increase contrast and press the
key to decrease contrast (min 0 ~ max 100).
Use this key to activate automatic setup and adjust menu. The following dialog appears on a black screen as the monitor self
NOTE: Auto Adjust does not occur if you press the button while there are no active video input signals or attached cables.
COLOR SETTINGS
Use the Color Setting menu to adjust the monitor's color settings.
Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can further tune your monitor
Pixel Clock (Coarse) and Phase (Fine) controls under Image Settings.
Back
Input Color Format
Mode Selection
Press
to go back to the main menu.
Allows you to set the video input mode to:
l
RGB: Select this option if your monitor is connected to a computer or DVD player using the HDMI cable or the HDMI to DVI adapter
l
YPbPr: Select this option if your DVD player supports only YPbPr output.
Allows you to set the display mode to:
l
Graphics: Select this mode if your monitor is connected to your computer.
l
Video: Select this mode if your monitor is connected to a DVD player.
NOTE: Depending upon the Display Mode you select the Preset Modes available for your monitor change.
Preset Mode
Allows you to choose from a list of preset color modes.
In the Graphics mode, you can set the color to the following preset values:
l
Standard: Loads the monitor's default color settings. This is the default preset mode.
l
Multimedia: Loads color settings ideal for multimedia applications.
l
Game: Loads color settings ideal for most gaming applications.
l
Warm: Increase the color temperature. The screen appears warmer with a red/yellow tint.
l
Cool: Decreases the color temperature. The screen appears cooler with a blue tint.
l
Custom (RGB): Allows you to manually adjust the color settings. press the
your own preset color mode.
In the Video mode, you can set the color to the following preset values:
l
Movie: Loads color settings ideal for movies. This is the default preset mode.
l
Game: Loads color settings ideal for most gaming applications.
l
Sports: Loads color settings ideal for sports.
l
Nature: Loads color settings ideal for nature.
and keys to adjust the Red, Green, and Blue values
Hue
Saturation
Demo Mode
You can launch the Demo Mode to identify the monitor display difference between Normal and Enhanced.
Reset Color Settings
Resets your monitor's color settings to the factory defaults.
Allows you to adjust the skin tone of the image. Use
or
to adjust the hue from '0' to '100'.
NOTE: Hue adjustment is available only in the Video mode.
Allows you to adjust the color saturation of the image. Use
or
to adjust the saturation from '0' to '100'.
NOTE: Saturation adjustment is available only in the Video mode.
DISPLAY SETTINGS
Use the Displays Settings menu to adjust the monitor's display settings.
Back
Horizontal Position
Horizontal Position
Use the
or
buttons to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+).
Vertical Position
Use the
or
buttons to adjust image up and down. Minimum is '0' (-). Maximum is '100' (+)
Sharpness
This feature can make the image look sharper or softer. Use
Pixel Clock
The Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference. Use
Phase
If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase (fine), again.
Dynamic Contrast
Dynamic Contrast adjusts the contrast ratio to 15000:1.
Press
to go back to the main menu.
Press
to go back to the main menu.
or
to adjust the sharpness from '0' to '100'
or
buttons to adjust for best image qu
(for IN1920 only)
Press the
button to select the Dynamic Contrast "On" or "Off".
Reset Display Settings
Select this option to restore default display settings.
OTHER SETTINGS
Select this option to adjust the settings of the OSD, such as, the languages of the OSD, the amount of time the menu remains on screen, and
Back
Press
to go back to the main menu.
Language
Allows you to set the OSD display to one of eight languages: English, Spanish, French, German, Japanese, Brazilian Portuguese, Simplified Chi
Menu Transparency
Allows you to adjust the OSD background from opaque to transparent.
Menu Timer
Allows you to set the time for which the OSD remains active after you press a key on the monitor.
Use the
Menu Lock
and
keys to adjust the slider in 1 second increments, from 5 to 60 seconds.
Controls user access to adjustments. When Lock is selected, no user adjustments are allowed. All keys are locked except
NOTE: When the OSD is locked, pressing the menu key takes you directly to the OSD settings menu, with 'OSD Lock' pre
hold DDC/CI
key for 15 seconds to unlock and allow user access to all applicable settings.
DDC/CI (Display Data Channel/Command Interface) allows a software on your computer to adjust the monitor display settings like the brightne
balance etc.
Enable (Default): Optimizes the performance of your monitor and provides a better customer experience.
Disable: Disables the DDC/CI option and the following message appears on the screen.
LCD Conditioning
Helps reduce minor cases of image retention. Depending on the degree of image retention, the program may take some time to run. You can e
feature by selecting "Enable".
Factory Reset
Resets all OSD settings to the factory preset values.
Personalize
Allows you to adjust shortcut key for: 1. Preset modes, 2. Brightness / Contrast, 3. Auto Adjust.
Back
Press
to go back to the main menu.
OSD Messages
When the monitor does not support a particular resolution mode you will see the following message:
IN1720:
IN1920:
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See Monitor Specifications for the
horizontal and vertical frequency ranges addressable by this monitor. Recommended mode is1440 x 900 (for IN1720) or 1366 x 768 (for
IN1920).
You will see the following message before the DDC/CI function is disabled. When the monitor enters the Power Save mode, the following message appears: Activate the computer and wake up the monitor to gain access to the OSD
If you press any button other than the power button the following messages will appear depending on the selected input:
If VGA cable is not connected, a floating dialog box as shown below appears.
See Solving Problems for more information.
Setting the Maximum Resolution
To set the Maximum resolution for the monitor:
1.
2.
3.
4.
Right-click on the desktop and select Properties.
Select the Settings tab.
Set the screen resolution to 1440 x 900 (for IN1720) or 1366 x 768 (for IN1920).
Click OK.
If you do not see 1440 x 900 (for IN1720 only) or 1366 x 768 (for IN1920 only) as an option, you may need to update your graphics card driver. Depending on
your computer, complete one of the following procedures:
l
l
If you have a Dell desktop or portable computer:
¡ Go to support.dell.com, enter your service tag, and download the latest driver for your graphics card.
If you are using a non-Dell computer (portable or desktop):
¡ Go to the support site for your computer and download the latest graphic drivers.
¡ Go to your graphics card website and download the latest graphic drivers.
Using the Dell Soundbar (for IN1920 only)
The Dell Soundbar is a stereo two channel system, mountable on Dell Flat Panel Displays. The Soundbar has a rotary volume and on/off control to adjust the
overall system level, a LED for power indication, and two audio headset jacks.
1.
2.
3. Power ON/volume control
Power indicator
Headphone connectors
Using the Tilt
Tilt
With the stand assembly, you can tilt the monitor for the most comfortable viewing angle.
NOTE: The stand base is detached when the monitor is shipped from the factory.
Back to Contents Page
Back to Contents Page
Setting Up Your Monitor
Dell™ IN1720/IN1920 Flat Panel Monitor
Setting the display resolution to 1440 x 900 (for IN1720) or 1366 x 768 (for
IN1920) (Maximum)
For optimal display performance while using the Microsoft Windows operating systems, set the display resolution to 1440 x 900 (for IN1720) or 1366 x 768 (for
IN1920) pixels by performing the following steps:
1. Right-click on the desktop and click Properties.
2. Select the Settings tab.
3. Move the slider-bar to the right by pressing and holding left-mouse button and adjust the screen resolution to 1440 x 900 (for IN1720) or 1366 x 768
(for IN1920).
4. Click OK.
If you do not see1440 x 900 (for IN1720) or 1366 x 768 (for IN1920)as an option, you may need to update your graphics driver. Please choose the
scenario below that best describes the computer system you are using, and follow the provided directions:
1: If you have a Dell™ desktop or a Dell™ portable computer with internet access.
2: If you have a non Dell™ desktop, portable computer, or graphics card.
Back to Contents Page
Dell™ IN1720/IN1920 Flat Panel Monitor User Guide
Setting the display resolution to 1440 x 900 (for IN1720) or 1366 x 768 (for IN1920)(Maximum)
Information in this document is subject to change without notice.
© 2010 Dell Inc. All rights reserved
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.; Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in
the United States and/or other countries.ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency. As an ENERGY STAR partner, Dell Inc. has determined
that this product meets the ENERGY STAR guidelines for energy efficiency.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.
Model IN1720c/IN1920c/IN1920b/IN1920f
January 2010 Rev. A00
Back to Contents Page
Setting Up the Monitor
Dell™ IN1720/IN1920 Flat Panel Monitor User's Guide
Attaching the Stand
Connecting Your Monitor
Removing the Stand Base Attaching the Dell Soundbar (Optional)
Removing the Stand for VESA wall mount
Attaching the Stand
NOTE: The stand base is detached when the monitor is shipped from the factory.
To attach the monitor stand body to the stand base: 1. Place the monitor stand base on a stable table top.
2. Slide the monitor stand body in the correct direction down onto the stand base until it clicks into place.
Connecting Your Monitor
CAUTION: Before you begin any of the procedures in this section, follow the Safety Instructions.
To connect your monitor to the computer:
1.
2.
Turn off your computer and disconnect the power cable. Connect the blue display connector cable to the corresponding video port on the back of your computer. Connecting the Blue VGA Cable
CAUTION: The graphics are used for the purpose of illustration only. Appearance on the computer may vary.
Removing the Stand Base
IN1720:
IN1920:
To remove stand base from the monitor: 1.
Place the monitor panel on soft cloth or cushion on a stable flat table.
2.
Press and hold the release latch, while pulling the stand base away from the monitor.
Attaching the Dell Soundbar(for IN1920 only)
NOTICE: Do not use with any device other than the Dell Soundbar. To attach the soundbar:
1.
Working from the back of the monitor, attach Soundbar by aligning the two slots with the two tabs along the bottom of the monitor.
2.
Slide the Soundbar to the left until it snaps into place.
3.
Connect the Soundbar with the DC power connector from the Soundbar Power Adaptor.
4.
Insert the mini stereo plug from the back of the Soundbar into the computer's audio output jack.
Removing the Stand for VESA Wall Mount
IN1720:
IN1920:
To remove the stand assembly from the monitor:
1.
Place the monitor panel on soft cloth or cushion on a stable flat table.
2.
Remove the three screws on the stand of the monitor as shown above.
3.
Remove the stand assembly from the monitor.
Back to Contents Page
Back to Contents Page
Troubleshooting
Dell™ IN1720/IN1920 Flat Panel Monitor
Self-Test
Common Problems
Product Specific Problems
CAUTION: Before you begin any of the procedures in this section, follow the Safety Instructions.
Self-Test
Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly
connected but the monitor screen remains dark, run the monitor self-test by performing the following steps:
1.
2.
3.
Turn off both your computer and the monitor.
Unplug the video cable from the back of the computer. To ensure a proper Self-Test operation, remove the Analog (blue connector) cable from the back
of computer.
Turn on the monitor.
The floating dialog box should appear on-screen (against a black background) if the monitor cannot sense a video signal and is working correctly.
While in self-test mode, the power LED remains white. Also, depending upon the selected input, the dialog shown below will continuously scroll
through the screen.
4.
5.
This box also appears during normal system operation, if the video cable becomes disconnected or damaged.
Turn off your monitor and reconnect the video cable; then turn on both your computer and the monitor.
If your monitor screen remains blank after you use the previous procedure, check your video controller and computer, because your monitor is functioning
properly.
NOTE: Self-test feature check is not available for S-Video, Composite, and Component video modes. Built-in Diagnostics
Your monitor has a built-in diagnostic tool that helps you determine if the screen abnormality you are experiencing is an inherent problem with your monitor, or
with your computer and video card.
NOTE: You can run the built-in diagnostics only when the video cable is unplugged and the monitor is in self-test mode.
To run the built-in diagnostics:
1.
2.
3.
4.
5.
6.
7.
Ensure that the screen is clean (no dust particles on the surface of the screen).
Unplug the video cable from the back of the computer or monitor. The monitor then goes into the self-test mode.
Press and hold the 1st and 4th buttons on the front panel, simultaneously for 2 seconds. A gray screen appears.
Carefully inspect the screen for abnormalities.
Press the 4th button on the front panel again. The color of the screen changes to red.
Inspect the display for any abnormalities.
Repeat steps 5 and 6 to inspect the display in green, blue, black, white colored screens.
The test is complete when the white screen appears. To exit, press the 4th button again. If you do not detect any screen abnormalities upon using the built-in diagnostic tool, the monitor is functioning properly. Check the video card and computer.
Common Problems
The following table contains general information about common monitor problems you might encounter and the possible solutions.
Common Symptoms
No Video/Power LED off
What You Experience
No picture
l
l
l
No Video/Power LED on
No picture or no brightness
l
l
l
l
Poor Focus
Picture is fuzzy, blurry, or
ghosting
l
l
l
l
l
Shaky/Jittery Video
Wavy picture or fine movement
l
l
l
l
l
Missing Pixels
LCD screen has spots
l
l
l
Stuck-on Pixels
LCD screen has bright spots
l
l
l
Brightness Problems
Picture too dim or too bright
l
l
l
Geometric Distortion
Screen not centered correctly
l
l
l
Horizontal/Vertical Lines
Screen has one or more lines
l
l
l
l
l
l
Synchronization Problems
Screen is scrambled or appears
torn
l
l
l
l
l
l
Safety Related Issues
Intermittent Problems
Visible signs of smoke or
sparks
l
Monitor malfunctions on & off
l
l
l
l
Missing Color
Picture missing color
l
l
l
Possible Solutions
Ensure that the video cable connecting the monitor and the computer is properly
connected and secure.
Verify that the power outlet is functioning properly using any other electrical equipment.
Ensure that the power button is depressed fully.
Increase brightness & contrast controls via OSD.
Perform monitor self-test feature check.
Check for bent or broken pins in the video cable connector.
Run the built-in diagnostics.
Perform Auto Adjust via OSD.
Adjust the Phase and Pixel Clock controls via OSD.
Eliminate video extension cables.
Reset the monitor to Factory Settings.
Change the video resolution to the correct aspect ratio (16:10 for IN1720 & 16:9 for
IN1920).
Perform Auto Adjust via OSD.
Adjust the Phase and Pixel Clock controls via OSD.
Reset the monitor to Factory Settings.
Check environmental factors.
Relocate the monitor and test in another room.
Cycle power on-off.
Pixel that is permanently off is a natural defect that can occur in LCD technology.
Run the built-in diagnostics.
Cycle power on-off.
Pixel that is permanently off is a natural defect that can occur in LCD technology.
Run the built-in diagnostics.
Reset the monitor to Factory Settings.
Auto Adjust via OSD.
Adjust brightness & contrast controls via OSD.
Reset the monitor to Factory Settings.
Auto Adjust via OSD.
Adjust brightness & contrast controls via OSD.
Reset the monitor to Factory Settings.
Perform Auto Adjust via OSD.
Adjust Phase and Pixel Clock controls via OSD.
Perform monitor self-test feature check and determine if these lines are also in self-test
mode.
Check for bent or broken pins in the video cable connector.
Run the built-in diagnostics.
Reset the monitor to Factory Settings.
Perform Auto Adjust via OSD.
Adjust Phase and Pixel Clock controls via OSD.
Perform monitor self-test feature check to determine if the scrambled screen appears in
self-test mode.
Check for bent or broken pins in the video cable connector.
Restart the computer in the safe mode.
Do not perform any troubleshooting steps.
Contact Dell immediately.
Ensure that the video cable connecting the monitor to the computer is connected
properly and is secure.
Reset the monitor to Factory Settings.
Perform monitor self-test feature check to determine if the intermittent problem occurs in
self-test mode.
Perform monitor self-test feature check.
Ensure that the video cable connecting the monitor to the computer is connected
properly and is secure.
Check for bent or broken pins in the video cable connector.
Wrong Color
Picture color not good
l
l
l
l
Image retention from a static Faint shadow from the static
image left on the monitor for a image displayed appears on
long period of time
the screen
Change the Color Setting Mode in the Color Settings OSD to Graphics or Video
depending on the application.
Try different Color Preset Settings in Color Settings OSD. Adjust R/G/B value in Color
Settings OSD if the Color Management is turned off.
Change the Input Color Format to PC RGB or YPbPr in the Advance Setting OSD.
Run the built-in diagnostics.
l
Use the Power Management feature to turn off the monitor at all times when not in use
(for more information, see Power Management Modes).
Alternatively, use a dynamically changing screensaver.
In OSD Menu, under Reset to Factory Settings, select Enable LCD Conditioning. Using
this option may take several hours before the image is eliminated.
NOTE: Image Burn-in is not covered by your warranty.
l
Possible Solutions
Reset the monitor to Factory Settings.
l
Turn off the monitor, unplug the power cord, plug back, and then turn on the monitor.
No picture, the LED light is
white. When you press "up",
"down" or "Menu" key, the
message " No input signal" will
appear.
l
Check the signal source. Ensure the computer is not in the power saving mode by
moving the mouse or pressing any key on the keyboard.
Check whether the signal cable is plugged in properly. Re-plug the signal cable if
necessary.
Reset the computer or video player.
The picture cannot fill the
height or width of the screen
l
l
l
l
Product Specific Problems
Specific Symptoms
Screen image is too small
What You Experience
Image is centered on screen,
but does not fill entire viewing
area
Cannot adjust the monitor with OSD does not appear on the
the buttons on the front panel screen
No Input Signal when user
controls are pressed
The picture does not fill the
entire screen
l
l
l
Back to Contents Page
Due to different video formats (aspect ratio) of DVDs, the monitor may display in full
screen.
Run the built-in diagnostics.