Specifications | Dell PC6224P Switch User Manual

132992310.qxd
4/30/03
10:20 AM
Pagina
1
(Nero/Process Black pellicola)
WASHER-DRYER
WJD 1257 W
WJD 1257 S
WJD 1357 S
WJD 1457 W
JETSYSTEM 1200
DELAY
ON/OFF
COTTONS
SYNTHETICS
DELICATES
WOOL
HAND
WASH
90°C
60°C
50°C
40°C
30°C
STORE DRY
EXTRA
RINSE
IRON DRY
SYNTHETICS
STORE DRY
QUICK
WASH
RINSE
HOLD
WJD 1257 W
COTTONS
EXTRA DRY
PREWASH
1200
900
700
500
COTTONS
SKIP
SYNTHETICS
XTRACAPACITY
P E R AT U R E
SP
I N S P EE D
OP
TI O N S
AU
TO D R Y
RY
D
132992310
EM
T
F A B RIC S
I N G TI M E
STA R
T / P AU S E
R E S ET
INSTRUCTION BOOKLET
GB
132992310.qxd
4/30/03
10:20 AM
Pagina
2
(Nero/Process Black pellicola)
Important Safety Information
It is most important that this instruction book should be retained with the appliance for future
reference. Should the appliance be sold or transferred to another owner, or should you move
house and leave the appliance, always ensure that the book is supplied with the appliance in
order that the new owner can get to know the functioning of the appliance and the relevant
warnings.
These warnings have been provided in the interest of safety. You MUST read them carefully
before installing or using the appliance.
Installation
●
●
●
●
●
●
●
This appliance is heavy. Care should be taken when
moving it.
It is dangerous to alter the specifications or attempt
to modify this product in any way.
All packing and transit bolts must be removed before
use. Serious damage can occur to the product and to
property if this is not adhered to. See relevant section
in instructions.
Any plumbing work required to install this appliance
should be carried out by a qualified plumber or
competent person.
Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
Care must be taken to ensure that the appliance does
not stand on the electrical supply cable.
If the machine is situated on a carpeted floor, please
adjust the feet in order to allow air to circulate freely.
●
●
●
●
●
Child Safety
●
●
●
●
●
This appliance is designed to be operated by adults.
Children should not be allowed to tamper with the
controls or play with the product.
Pets and children have been known to climb into
washer-dryers. Please check your drum before use.
The glass door becomes very hot during the washing
and drying cycle. Keep children away from the
vicinity of the appliance whilst it is in operation.
Keep all packaging well away from children.
Keep all detergents in a safe place out of children’s
reach.
●
●
●
Use
●
●
●
●
Always unplug the appliance and turn off the water
supply after use.
Do not overload the appliance. See relevant section
in the instruction book.
Only wash and dry fabrics which are designed to be
machine washed and dried. If in doubt, consult the
care label on the clothes.
Before washing, ensure that all pockets are empty
and buttons and zips are fastened. Avoid washing
●
●
2
frayed or torn articles and treat stains such as paint,
ink, rust, and grass before washing. Underwired bras
must NOT be machine washed.
Any objects such as coins, safety pins, nails, screws,
stones or any other hard, sharp material can cause
extensive damage and must not be placed into the
machine.
Garments which have been in contact with volatile
petroleum products should not be machine washed.
If volatile cleaning fluids are used, care should be
taken to ensure that the fluid is removed from the
garment before placing in the machine.
Wash small items such as socks, laces, washable
belts etc in a washing bag or pillow case as it is
possible for such items to slip down between the tub
and the inner drum.
Only use the advised quantities of fabric softener.
Damage to the fabric can ensue if you over-fill.
Refer to the manufacturer’s recommendations of
quantities.
As some duvets and eiderdowns should be
washed/dried in large commercial machines because
of their bulk, please check with the manufacturer of
the item before washing in a domestic machine.
The users should always check that they have not
left their gas lighters (disposable or otherwise) in
their clothing.
Never tumble dry items that have had contact with
chemicals such as dry cleaning fluid.These are of a
volatile nature and could cause an explosion.
Only tumble dry items which have been washed in
water or require airing.
Plastic detergent dispensers should not remain in the
drum during the drying cycle, as the plastic used is
not designed to withstand the heat. If you wish to
wash-through-to-dry you should use the
conventional detergent dispenser drawer.
Leave the porthole door slightly ajar between washes
to preserve the door seal.
Under no circumstances should you attempt to repair
the machine yourself. Repairs carried out by
inexperienced persons may cause injury or serious
malfunctioning. Contact your local Service Force
Centre. Always insist on genuine Zanussi spare
parts.
132992310.qxd
4/30/03
10:20 AM
Pagina
3
(Nero/Process Black pellicola)
Contents
For the User
Maintenance and Cleaning
Important Safety Information
Your New Washer-Dryer
Description of the Appliance
Door locked light
Detergent dispenser drawer
Child safety feature
The Control Panel
Operating sequence
Descaling
After each wash
Maintenance wash
External cleaning
Cleaning the dispenser drawer
Cleaning the drawer recess
Cleaning the filter
The dangers of freezing
2
4
5
5
5
5
6-10
Something Not Working
Service and Spare Parts
Guarantee Conditions
11-14
Washing
11
Load the laundry
11
Measure out the detergent
11
Measure out the fabric softener
11
Switch the machine on
11
Select the required programme/fabric
11
Select the temperature
12
Select the spin speed or the RINSE HOLD option
12
Select the desired options
12
Select the DELAY TIME
12
Start the programme
12
How to change a programme during its cycle
13
How to cancel a programme during its cycle
13
How to open the door during the cycle of
a programme
13
End of programme
13
Drying 2.5 kg of cotton
14
Autodrying 2 kg of synthetics
14
Washing and Drying Hints
Which detergent to use?....
And in which form?
Wash Care Symbols
Washing Programmes
Drying Programmes
20-21
20
20
20
20
20
20
20-21
21
22-23
23
24
For the Installer
Installation Instructions
Technical Specifications
Unpacking
Positioning
Water inlet
Water drainage
Levelling
Special conditions
In the interest of the environment
Electrical connection
15
16
16
17
18
19
Guide to use the Instruction Book
The following symbols will be found in the text to guide you throughout the instructions:
Safety instructions
Hints and tips
Environmental information
3
25
25
26
26
27
27-28
28
28
28
29
132992310.qxd
4/30/03
10:20 AM
Pagina
4
(Nero/Process Black pellicola)
Your New Washer-Dryer
Your new washer-dryer, fitted with the Zanussi “JET SYSTEM”, meets all modern requirements
for effective treatment of laundry with low water, energy and detergent consumption.
Even small loads are washed “economically” because the amount of water used is regulated
automatically according to the load and type of fabric.
It is gentle with your laundry, simple to use and easy to care for.
●
●
●
●
The special wool programme with its new delicate
wash system treats your woollens with extreme care.
The anti-unbalance device ensures that the
machine remains stable when spinning.
Automatic cooling of the wash water to 60°C
before draining, with the 90°C programme. This
reduces thermal shock to fabrics, helping to prevent
creasing.
The two drying programmes will give your wash
that soft, relaxed feel whatever the weather.
In the interest
of the environment
●
●
●
Ecological hints
●
To save water and energy and help protect the
environment, we recommend that you follow these
hints:
● Adjust the quantity of detergent according to the
hardness of your water supply, the amount of
laundry and the degree of soiling.
● Select a “Quick” programme for lightly soiled
laundry.
● A programme without prewash is sufficient for
normally soiled laundry.
● Try to load the maximum drying capacity of the
machine as small loads are uneconomical.
● Always load well spun laundry. The higher the spin
speed, the lower the electricity consumption and the
shorter the drying times.
Materials marked with the symbol
are
recyclable.
Check with your local Council or Environmental
Health Office to see if there are facilities in your area
for re-cycling this appliance.
When the appliance is to be scrapped, cut off the
power supply cable and make the door lock device
unusable to prevent young children from being
trapped inside.
Help to keep your country tidy - use authorised
disposal sites for your old appliance.
How do we help to protect the environment?
We use recycled paper!
Important
Your machine is fitted with a balance control device, which ensures the machine is stable during the spin.
If the wash load appears not to have been spun sufficiently at the end of the wash cycle, because it is not evenly
distributed in the drum, the balance control device may have operated. It will therefore be necessary to redistribute the
wash load manually and select a spin programme. For more detailed information see the section headed "Something
Not Working".
4
132992310.qxd
4/30/03
10:21 AM
Pagina
5
(Nero/Process Black pellicola)
Description of the Appliance
1 Detergent dispenser drawer
2 Control Panel
3 Door locked light
4 Door opening handle
5 Filter
6 Adjustable feet
2
1
JETSYSTEM 1200
DELAY
ON/OFF
90°C
60°C
50°C
40°C
30°C
COTTONS
SYNTHETICS
DELICATES
WOOL
HAND
WASH
STORE DRY
EXTRA
RINSE
IRON DRY
SYNTHETICS
STORE DRY
QUICK
WASH
RINSE
HOLD
WJD 1257 W
COTTONS
EXTRA DRY
PREWASH
1200
900
700
500
COTTONS
SKIP
SYNTHETICS
XTRACAPACITY
P E R AT U R E
SP
I N S P EE D
OP
TI O N S
AU
TO D R Y
RY
D
EM
T
F A B RIC S
I N G TI M E
STA R
T / P AU S E
R E S ET
3
4
5
Door locked light
It stays on during the whole programme indicating that
the door is locked.
When the light goes out, the door can be opened (see
page 13).
6
Detergent dispenser drawer
Prewash
Main wash
Fabric softener
C0063
Child safety feature
This machine incorporates a special child safety feature
to prevent small children from being trapped inside the
machine.
To activate this device, rotate the button (without
pressing it) inside the door clockwise until the groove is
horizontal. If necessary use a coin.
To disable this device and restore the possibility of
closing the door, rotate the button anti-clockwise until
the groove is vertical.
P1131
5
132992310.qxd
4/30/03
10:21 AM
Pagina
6
(Nero/Process Black pellicola)
The Control Panel
COTTONS
SYNTHETICS
DELICATES
WOOL
ON/OFF
HAND
WASH
2
3
EM
SP
P E R AT U R E
4
PREWASH
AA40°
QUICK
WASH
RINSE
HOLD
IN S PEED
OP
5
TIO N S
6
COTTONS
SYNTHETICS
STORE DRY
A U T O D RY
7
1 ON/OFF button
WJD 1257 W
STORE DRY
IRON DRY
SKIP
SYNTHETICS
RY
D
1
1200
900
700
500
T
FA B RIC S
90°C
60°C
50°C
40°C
30°C
DELAY
START
COTTONS
EXTRA DRY
S TA R
IN G TI M E
8
T / PA U S E
9 10
RE SET
111213
Important!
Press this button to switch the machine on. The display
(9) will show three blinking dashes or a blinking zero.
You will find more detailed explanations on page 7 (see
“DISPLAY”).
Press the ON/OFF button again to switch the machine
off.
By pressing the TEMPERATURE and SPIN SPEED
buttons simultaneously for 3 seconds, the acoustic
signal is deactivated at the end of the cycle, when
selecting the programmes and in case of an incorrect
option selection.
By pressing these 2 buttons again the acoustic signal is
reactivated.
2 MAINS-ON light
5 SPIN SPEED button
This light is connected to the ON/OFF button. It lights
up when you press the button, and goes out when you
press it again.
Press this button repeatedly to change the spin speed, if
you want your laundry to be spun at a speed different
from the one proposed by the machine. The relevant
light will light up.
Maximum speeds are:
• for cotton: 1,400, 1,300 or 1,200 rpm depending on
the model;
• for synthetic fabrics, wool, and fabrics to be handwashed: 900 rpm;
• for delicate fabrics: 700 rpm.
RINSE HOLD position : when you choose this
option, the machine will not drain the water of the last
rinse, so as not to wrinkle the laundry.
At the end of the cycle, the START/PAUSE button light
will flash, to indicate that the water must be drained and
a static zero will appear on the display.
To complete the cycle, choose one of the following
options:
• Draining and spin:
- Press the START/PAUSE button. The machine
will drain the water, then spin the laundry at the
maximum speed provided for the selected
programme.
- Select spin speed by means of button 5, and press
the START/PAUSE button.
3 FABRICS button
Press this button repeatedly to select the programme on
the basis of the type of laundry to be washed. The light
relevant to the selected programme will light up. The
machine will propose a temperature and automatically
select the maximum spin value provided for the
programme you have chosen. You can change these
values by operating buttons 4 and 5.
Hand wash
When you select this programme, you obtain a
particularly delicate washing, suitable for articles of
clothing whose label indicates that they must be handwashed
.
4 TEMPERATURE button
Press this button repeatedly to increase or decrease the
temperature, if you want your laundry to be washed at a
temperature different from the one proposed by the
machine. The relevant light will light up.
Maximum temperatures are 90°C for cotton, 60°C for
synthetic fabrics, 40°C for delicate fabrics, wool and
fabrics to be hand-washed (HAND WASH programme).
6
132992310.qxd
4/30/03
10:21 AM
Pagina
7
(Nero/Process Black pellicola)
7 AUTO DRY button
• Drain only
- Press the SKIP/RESET button once, so as to cause
the DRAIN light
to light up, then press the
START/PAUSE button.
Important! If you accidentally press the SKIP/RESET
button more than once, the display will show three
blinking dashes. To cause the washing machine to
drain the water, select any washing programme by
means of the FABRIC button, then press
SKIP/RESET three times in order to select the
DRAIN position (only the DRAIN light will remain
lit).
The RINSE HOLD option cannot be selected for the
automatic WASHING & DRYING programme.
This button allows you to choose the required degree of
drying for cottons and synthetics:
- Extra dry (only for cottons)
- Store dry (cottons and synthetics)
- Iron dry (only for cottons)
The drying time is automatically adjusted by the
machine: the laundry will be dried to the selected degree
of dryness.
8 DRYING TIME button
By depressing this button you can select a timed
programme for cotton or synthetics, the relevant light
illuminates. To select “cottons” you have to push the
button for about 2 seconds. To select the drying time
push the button until the time you want appears in the
display according to the fabrics (cotton or synthetics)
you have to dry.
- For COTTON you can select a drying time from 10
minutes to 2 hours and 10 minutes (2.10).
- For SYNTHETICS you can select a drying time from
10 minutes to 1 hours and 40 minutes (1.40).
Every time you press the button the time increases, by
5 mins.
6 OPTIONS button
Press this button to select the following options:
• PREWASH: select this option if you wish your
laundry to be prewashed before the main wash (not
available for wool and hand-wash cycle).
The prewash ends with a short spin at 650 rpm in
programmes for cotton and synthetic fabrics, whereas
in the programme for delicate fabrics the water is only
drained.
• AA 40°: this option can be selected for cottons and
synthetics lightly or normally soiled with a
temperature of 40°C and higher.
If you select a temperature of 40°C, the machine will
prolong the time at 40°C in the washing phase; this
will allow an A class in energy efficiency and
washing performance to be achieved.
If you select 90°C and press the AA 40° button, the
washing temperature will be reduced from 90°C to
60°C.
If you select 60°C and press the AA 40° button, the
washing temperature will be reduced from 60°C to
40°C. In both cases the washing time will be
prolonged.
• QUICK: select this option for laundry that is only
slightly soiled (not for wool and HAND WASH
programme).
The washing time will be reduced according to the
type of fabric and the selected temperature.
The PREWASH, AA 40°and QUICK options cannot
be selected together.
9 Display
The following pieces of information are shown on the
display:
• Three blinking dashes, when a programme is
cancelled by means of the SKIP/RESET button.
The three blinking dashes will also appear when you
press the ON/OFF button to switch the machine on, if
the previously selected cycle has been erased.
--• Duration of washing programme in hours
and minutes, after you have selected a programme.
7
132992310.qxd
4/30/03
10:21 AM
Pagina
8
(Nero/Process Black pellicola)
• Delay start, a time value indicated in hours and
selected by means of the relevant button.
2.05
While the programme is running (after you have
pressed the START/PAUSE button), the displayed
time value decreases by one unit every minute.
• Selected drying time in minutes or hours and
minutes.
The delay time is displayed for 3 seconds, then the
duration of the selected programme reappears.
After you have pressed the START/PAUSE button, the
countdown begins, and the delay time value decreases
by one unit every hour.
You can delay the start of the selected programme by
up to 24 hours in one hour intervals.
• An incorrect option selection has been made: this is
indicated by the message Err when a function
incompatible with the current programme is selected.
1.25
After the programme has started the time remaining is
updated every minute.
• The washing machine has stopped with water in
the tub, at the end of a programme with the RINSE
HOLD option: this is indicated by a static zero.
• The washing machine has completed the
programme: this is indicated by a blinking zero. At
the same time, the door locked light goes out. The
zero will reappear when you switch the washing
machine on, unless the previous programme has been
erased by means of the SKIP RESET button.
The incorrect selection is also indicated by an audible
warning signal.
• An alarm code indicates a fault in the machine
operation (see the relevant chapter on page 22-23).
E20
0
Important!
The first time you use the washing machine, when
you switch it on, it may display a blinking zero and give
an audible warning signal. This is due to the fact that the
washing machine has performed a washing cycle during
the manufacturer’s inspection tests, and this cycle has
not been erased after its completion.
8
132992310.qxd
4/30/03
10:21 AM
Pagina
9
(Nero/Process Black pellicola)
10 START/PAUSE button
A normal wash cycle consists of the following phases,
Wash - Rinses - Spin and is confirmed by the
illumination of the corresponding LED,s.
This button has three functions:
• Start: after you have selected the desired programme
and options, press this button to start the machine. The
light above the button will stop flashing and remain lit.
If you have selected a delay time by means of button
12, the countdown will begin and will be shown on
the display.
PREWASH
WASH
RINSES
SPIN
DRAIN
• Pause: when you press this button again, the
programme in progress is interrupted. The light above
the button will start flashing. To restart the
programme, press the button again.
When you PAUSE the cycle, the DOOR LOCKED
light goes out, and it becomes possible to open the
door, provided
• the machine is not in the heating or drying phase;
• the level of the water is not high;
• the drum is not turning.
Important! You must set the washing machine to
PAUSE before you make any change in the programme
in progress.
• Draining of water and spinning after the execution
of programmes with the RINSE HOLD option.
DRYING
To select rinse & spin, press the SKIP button once, the
wash LED goes out.
To select spin only, press the SKIP button twice.
The wash & rinse LED,s go out.
11 SKIP/RESET button
This button performs two functions:
- Clears the memory
- Selects special programmes
At the end of every programme the RESET button must
be pressed once or repeatedly to clear the programme
memory. This will be confirmed by three dashes,
flashing in the display.
If the previous programme is not cleared, the display
will show a “0” flashing and an audible signal will
sound, when you switch the machine on.
Selecting a special programme:
A wash programme must be selected in the normal way.
(START button not pressed)
To select Drain press the SKIP button three times, the
wash - rinse - spin LED,s go out.
If you wish to cancel or advance the running
programme to the required phase, PAUSE the cycle and
then press the SKIP button as previously described.
S TA R T / P A U S E
9
132992310.qxd
4/30/03
10:21 AM
Pagina
10
(Nero/Process Black pellicola)
12 DELAY START button
13 Programme phase indicator
lights
This button makes it possible to delay the starting of the
programme by up to 24 hours. The delay you have
selected is shown on the display for about 3 seconds;
afterwards, the duration of the programme reappears.
You must select this option after you have set the
programme and before you press the START/PAUSE
button.
The time value shown on the display will decrease by
one unit every hour.
You can change the delay time at any moment,
before you press the START/PAUSE button.
If you have already pressed the START/PAUSE button,
and you wish to change or cancel the delay time,
proceed as follows:
When you select a programme, the lights relevant to the
phases that form the programme light up.
After you have started the programme, only the light
relevant to the phase that is currently being carried out
will remain lit.
• set the machine to PAUSE by pressing the
START/PAUSE button;
• press the DELAY START button until the display
shows the desired delay time or
• press the DELAY START button once, to erase the
delay time. The display will indicate “0 h”.
• press the START/PAUSE button again.
Important!
The door will be locked throughout the delay time
(DOOR LOCKED light lit).
If you need to open the door, you must first set the
machine to PAUSE by pressing the START/PAUSE
button. After you have closed the door, press the
START/PAUSE button again.
10
132992310.qxd
4/30/03
10:21 AM
Pagina
11
(Nero/Process Black pellicola)
Operating Sequence
4. Switch the machine on
WASHING
Before the first wash, we recommend that you run a
cotton cycle at 60°C, without any laundry in the
machine, to remove any manufacturing residue from the
drum and tub.
Pour 1/2 a measure of detergent into the dispenser
drawer and start the machine.
Press the ON/OFF button to switch the machine on. The
display will show three blinking dashes or a blinking
zero. The light above the button will light up.
O N / OFF
1.Load the laundry
---
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
5. Select the desired programme/
fabric
Press the FABRICS button repeatedly, in order to select
the desired programme/fabric. The relevant light will
light up.
The lights relevant to the phases that form the
programme will light up.
The display will show the duration of the selected
programme, calculated on the basis of the maximum
load for each type of fabric. The START/PAUSE button
light will start flashing.
If the load of laundry to be washed is small, at the
beginning of the cycle the display will still indicate the
duration relevant to the maximum load. The duration
value will be gradually adjusted during the execution of
the cycle.
P0004
2.Measure out the detergent
Pull out the dispenser drawer until it stops. Measure out
the amount of detergent required and pour it into the
main wash compartment
.
If you wish to carry out the prewash, pour detergent into
the appropriate compartment marked
.
3.Measure out the fabric
softener
COTTONS
SYNTHETICS
DELICATES
WOOL
If required, pour fabric softener into the compartment
marked , without exceeding the «MAX» mark.
HAND
WASH
FA B RIC S
C0064
0
C0065
Close the drawer gently.
11
132992310.qxd
4/30/03
10:21 AM
Pagina
12
(Nero/Process Black pellicola)
6. Select the temperature
9. Select the DELAY START
Press the TEMPERATURE button if you wish to select
a temperature value different from the one proposed by
the washing machine.
The relevant light will light up.
Before you start the programme, if you wish the
starting to be delayed, press the DELAY START button
repeatedly, or keep it pressed, to select the desired delay.
The selected delay time value (up to 24 hours) will
appear on the display for 3 seconds, then the duration of
the programme will appear again.
90°C
60°C
50°C
40°C
30°C
RE
T
EM
DELAY
P ER ATU
7. Select the spin speed or the
RINSE HOLD option
10. Start the programme
Press the SPIN SPEED button repeatedly, in order to
select the desired spin speed or the RINSE HOLD
option. The relevant light will light up.
If you select the RINSE HOLD option, the machine will
stop at the end of the programme with the water still in
the tub.
Press the START/PAUSE button. The relevant light will
stop flashing, the DOOR LOCKED light will light up,
and only the light relevant to the phase that is in
progress will remain lit.
If you have chosen a delayed start, the washing machine
will begin the countdown.
The display will show the duration of the programme or
the selected delay.
1200
900
700
500
RINSE
HOLD
N SPEE
D
S
PI
S TA R T / P A U S E
8. Select the desired options
If your laundry is very dirty, it may be advisable to
select the PREWASH option.
If your laundry is lightly or normally soiled and it is
necessary to prolonge the washing time, select the
AA40° option.
If your laundry is only slightly soiled, select the QUICK
option.
The relevant light illuminates.
PREWASH
AA40°
QUICK
OP
TIO N S
12
132992310.qxd
4/30/03
10:21 AM
Pagina
13
(Nero/Process Black pellicola)
11. How to change a programme
during its cycle
After approximately 3 minutes, you can open the door.
Pay attention to the level and temperature of the
water in the machine!
When you close the door and press the ON/OFF button
again, the machine will resume the programme from the
point where it had been interrupted.
Before you make any change, you must pause the
machine by pressing the START/PAUSE button.
It is possible to change any phase before the programme
carries it out.
Changing the type of fabric or temperature is possible,
obviously, only during the washing phase. When you
make a change in these two parameters, the machine
will resume the cycle from the beginning.
If it is necessary to drain the water in order to change the
programme in progress, proceed as follows:
• PAUSE the machine by pressing the START/PAUSE
button;
• press the SKIP/RESET button repeatedly, until only
the DRAIN light remains lit;
14. End of programme
At the end of the programme, the machine stops
automatically, gives an audible signal, and displays a
blinking zero.
If you had selected the RINSE HOLD option, the
START/PAUSE button light flashes to indicate that the
water must be drained. The display shows a steadily lit
zero.
When the programme has been completed, a blinking
zero appears on the display and the audible signal is
given.
The DOOR LOCKED light goes out at once.
Press the SKIP/RESET button repeatedly to erase
the programme that has just been carried out. If you
omit to do this, the next time you switch the machine
on, the blinking zero will appear on the display and
you will hear the audible signal.
• press the START/PAUSE button again.
When the water has been drained, the display shows a
blinking zero. You may now select a new programme
and press the START/PAUSE button to start it.
12. How to cancel a programme
during its cycle
Note: when you switch the machine on, if you must
erase the previously performed programme, it is also
sufficient to press the FABRIC button and select a new
programme.
Press the ON/OFF button to switch the machine off. The
relevant light will go out.
Remove the laundry from the machine.
Check whether the drum is completely empty, by
rotating it with your hand. The purpose of this is to
prevent any items of laundry from remaining
accidentally in the drum, where they might get damaged
in a subsequent wash (e.g. by shrinking) or bleed colour
into another load of laundry.
We advise you to close the water supply tap and
disconnect the plug from the socket.
Leave the door ajar in order to air the machine.
To cancel a programme that is being carried out, first
pause the machine by pressing the START/PAUSE
button, then press the SKIP/RESET button repeatedly,
until the display shows three blinking dashes.
13. How to open the door during
the cycle of a programme
You can open the door, after having set the machine to
PAUSE, provided the following conditions exist:
• the washing machine is not in the heating phase
beyond 55°C;
• the level of the water is not high;
• the drum is not turning.
If these requirements are met, when you pause the
machine, the DOOR LOCKED light goes out and the
door can be opened.
Should it not be possible to open the door, and should it
be absolutely necessary to do so, switch the machine off
by pressing the ON/OFF button.
13
132992310.qxd
4/30/03
10:21 AM
Pagina
14
(Nero/Process Black pellicola)
5. At the end of the programme press SKIP/RESET
button to clear the memory and switch the machine
off by depressing ON/OFF button.
6. Remove the laundry.
DRYING 2.5 KG OF COTTON
You have for example just machine-washed and spun at
1200 rpm 5 kg (11 lb) of laundry.
They are cotton fabrics of medium weight which you
want to iron as soon as they are dry.
Press the SKIP/RESET button repeatedly to erase the
programme that has just been carried out, --will show in the display and switch the
machine off by depressing ON/OFF button.
Then remove the laundry from the appliance and divide
the items to obtain two loads of approx. 2.5 kg (5.5 lb)
each.
The water tap must be open and the drain hose must be
positioned in the sink or connected to the drain pipe.
1. Load the laundry.
2. Depress the ON/OFF button to switch the machine
on, --- will show in the display.
Note:
The programme time will automatically increase by up
to 1 minute, this is quite normal.
AUTODRYING 2 KG OF SYNTHETICS
You intend to wash and dry automatically 2 kg (4.4 lb)
of synthetics which do not need ironing.
Do not use a dosing device/ball when carrying out a
washing & drying programme.
1. Load the laundry.
2. Add detergent and fabric softener.
3. Switch the machine on by depressing the ON/OFF
button .
4. Select the wash programme/fabric and temperature.
5. Select the drying time or degree of drying.
6. Select the required options by means of the relevant
buttons. If possible, do not select a spin speed lower
than that proposed by the appliance to avoid a too
long drying time so saving energy.
In any case the reduction of the spin speed is only
possible after selecting drying. The lowest values
you can select are the following:
- 900 r.p.m. for cottons & synthetics with electronic
drying
- 900 r.p.m. for cottons and 700 r.p.m. for synthetics
with timed drying
7. Start the programme by depressing the
START/PAUSE button.
8. At the end of the programme press the
SKIP/RESET button to clear the memory and press
the ON/OFF button again to switch the machine off.
9. Remove the laundry.
3. If you wish to carry out the electronic drying,
depress AUTO DRY button until the light IRON
DRY illuminates.
COTTONS
EXTRA DRY
STORE DRY
IRON DRY
SYNTHETICS
STORE DRY
AU
T O D RY
If you want a timed drying, depress the DRYING
TIME button until the light COTTONS lights up, then
depress the same button until the time you want appears
on the display.
55
COTTONS
SYNTHETICS
D
RY
IN G TI M E
4. Press the START/PAUSE button to start the
programme.
S TA R T / P A U S E
14
132992310.qxd
4/30/03
10:21 AM
Pagina
15
(Nero/Process Black pellicola)
Washing and Drying Hints
Do NOT overload the machine. Weigh the laundry the
first few times you use the appliance.
●
The average weights of the most common items are
listed below as a guide:
1000g = 1 kg
●
Sheet
700-1000 g
Pillow case
100-200 g
Tablecloth
400-500 g
Serviette
50-100 g
Tea towel
70-120 g
Linen hand towel
100-150 g
Towelling hand towel
150-250 g
Towelling bath towel
700-1000 g
Bath robe
●
●
●
1000-1500 g
Man’s shirt
200-300 g
Apron
150-200 g
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Load the laundry loosely alternating large items with
small ones.
Sort the laundry according to the type of fabric,
colour-fastness and how dirty it is.
Avoid washing unhemmed or torn items as they may
unravel.
Before washing, empty all pockets of small objects
which may have been left inside (coins, keys, screws
etc). as these could damage the drain pump.
When washing curtains, remove the hooks.
Close poppers and zips and fasten loose buttons.
It is essential to wash new coloured items separately
when washing for the first time.
When washing fabrics requiring different wash
temperatures together, always select the lowest
temperature.
White items should not be washed with coloured
items.
Very small items (handkerchiefs, ribbons, socks etc)
should be washed in a washing bag or a pillow case.
Use a good quality detergent suitable for automatic
washing machines.
Use the correct quantities of detergent.
For wool, use gentle detergent only in small
quantities.
Bleach is very corrosive; it should be used with care
and kept out of reach of children.
●
●
●
●
Some stains such as fruit, wine, grass, rust etc. are
difficult to remove and should be treated before
washing with specific products, which can be found
in most household shops. In some cases it may help
to soak the stain before washing with a special presoak product or biological detergent.
If you have used the machine to wash, rinse or spin
only non-colour fast garments, there may be dye left
in the sump. To ensure any subsequent wash is not
contaminated with the dye, select and carry out a
rinse and spin programme, without any garments, to
ensure that any dye is removed from the sump.
Do not leave the damp laundry load in a heap too
long before drying.
Avoid drying dark clothes with light coloured fluffy
items such as towels as these can attract the fluff.
If you overdry the laundry, besides wasting energy,
any subsequent ironing may become more difficult
because the fabric could be heavily crumpled.
Remove the laundry when the appliance has finished
drying.
To avoid a static charge when drying is completed,
use either a fabric softener when you are washing the
laundry or a fabric conditioner specifically for
tumble dryers.
Particularly delicate items such as synthetic curtains,
woollen and silk, garments with metal inserts, nylon
stockings, bulky garments such as anoraks,
bedcovers, quilts, sleeping bags and duvets must not
be machine dried.
Garments padded with foam-rubber or materials
similar to foam-rubber must not be machine dried;
they represent a fire hazard.
Also, fabrics containing residues of setting lotions or
hair sprays, nail solvents or similar solutions must
not be machine dried in order to avoid the formation
of harmful vapours.
For drying, follow the indications given on the
manufacturer’s labels.
May be tumble dried
Drying at high temperature
Drying at reduced temperature
Do not tumble dry
Important:
As a dryer, the machine works on the condensation
principle.
Therefore, the water taps must be open and the
drain hose must drain water into a sink or into
the drain pipe, even during the drying cycle.
15
132992310.qxd
4/30/03
10:21 AM
Pagina
16
(Nero/Process Black pellicola)
Which detergent?....
And in which form?
To ensure you obtain the best wash results from your
appliance, it is important to use the right detergent in
your everyday wash, and only detergents recommended
for use in automatic machines.
To maintain the appearance of your clothes and
household textiles and to make them last longer you
should use different types of detergent for different
washes, whether for whites, colours or delicates.
Not only are there different types of detergent, but they
are also available in different forms. Whether you chose
a powder or liquid in traditional or compact form is
your own personal choice.
TRADITIONAL POWDERS
Pour the powder directly into the dispenser drawer. Do
not sprinkle powder onto clothes in the machine drum.
TRADITIONAL LIQUIDS
WHITES
Liquid can be placed in the main wash compartment of
the detergent drawer marked with the symbol
, start
the machine immediately upon placing the
detergent in the dispenser drawer.
Alternatively the detergent is measured into the
specially designed dosing device* which should be
placed on top of the laundry, and at the back of the
machine drum.
We recommend the Ariel product
range which is biological and
designed to provide excellent
cleaning and stain removal even
at low temperatures.
NON BIOLOGICAL
If you prefer to use a non
biological detergent, which does
not contain enzymes we
recommend Fairy. Fairy provides
good cleaning and stain removal.
COMPACT POWDERS AND LIQUIDS
Compact detergents (or concentrates as they are also
known) are available in liquid or powder form, and
generally require a smaller dosage. Follow the
manufacturer’s instructions to ensure the most
economical usage. Pour the detergent directly into the
dispenser drawer, or alternatively measure the detergent
into the specially designed dosing device* which
should be placed on top of the laundry, and at the back
of the machine drum.
COLOUREDS
For coloured items you should use a
detergent which is designed to clean
while maintaining the original colour.
Ariel Color does not contain bleach
and therefore helps to preserve
colours.
* If you use a dosing device in a washer dryer,
please ensure the dosing device/ball is removed
before carrying out a drying programme.
DELICATE ITEMS
FABRIC CONDITIONERS
When washing delicates such as
woollens, you should use a product
which is specially designed to care for
fine fabrics.
Dreft Automatic is suitable for
woollens and other delicates.
These are ideal for improving ‘softness’, and also
reduce static cling on synthetics and make ironing
easier. They are available in two types:
For example Lenor liquid fabric
softener, for use in the washing
machine/washer dryer. The
liquid fabric softener should be
poured into the compartment
marked with the symbol .
Follow the manufacturer’s dosage
instructions and never exceed the
MAX level.
LAUNDRY BLEACH
For additional stain removal you may
wish to use a product such as Ace
Gentle Bleach which is used in addition
to your chosen detergent. Ace is
suitable for all washable fabrics
including silks, woollens and coloureds.
Bounce conditioning sheets for use
in a tumble dryer. We recommend
the conditioning sheets are pinned
(using a safety pin) to an article
of laundry and placed in the
tumble dryer.
16
132992310.qxd
4/30/03
10:21 AM
Pagina
17
(Nero/Process Black pellicola)
Wash Care Symbols
Wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling
code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct
programme on your washing machine.
WASHING SYMBOL
WASH ACTION
95
Normal (Maximum)
White Cotton or Linen
without Special Finishes
60
Normal (Maximum)
Cotton, Linen or Viscose
without Special Finishes
Colourfast at 60°C.
50
Reduced (Medium)
Nylon, Polyester/Cotton, Viscose
with Special Finishes,
Cotton/Acrylic Mix.
40
Normal (Maximum)
Cotton, Linen or Viscose
Colourfast at 40°C but not 60°C.
40
Reduced (Medium)
Acrylics, Acetate, Triacetate, Wool
mixes, Polyester/wool blends.
40
Much Reduced (Minimum)
Hand wash only
FABRIC
Wool, wool mixtures, Silks
Do not machine wash
BLEACHING
Chlorine bleach may be used
IRONING
Hot iron
Cotton, Linen, Viscose
Warm iron
Polyester mixtures, Wool
Cool iron
Acrylic, Nylon, Polyester
DRY CLEANING
May be dry cleaned. Other letters and/or a bar beneath the circle will
indicate the required process to the dry cleaner.
TUMBLE DRYING
with high heat setting
with low heat setting
May be tumble dried
X
A cross through any symbol means «DO NOT»
Important Notes
fabric conditioner to avoid the conditioner entering the
machine prematurely.
When using liquid detergent and a prewash programme,
place the detergent into the correct compartment in the
dispenser drawer, after the prewash has finished.
For best results, always use the dispenser drawer for
dispensing detergents and liquid additives.
Once the dispenser has been filled, close it by pushing it
in gently. This is particularly important if you are using
17
132992310.qxd
4/30/03
10:21 AM
Pagina
18
(Nero/Process Black pellicola)
Washing programmes
Type of
laundry and
symbols on
labels
60
95
White cotton:
e.g. sheets,
tablecloths,
household
linen
60
40
30
Load
50
40
30
Synthetic
fabrics and
blends: e.g.
shirts, blouses,
underwear
40
30
30
Consumption*
Available options
Energy
kWh
Water
litres
Time
h/min.
Cottons
60°-90°C
Main wash at
60°-90°C
3 rinses
Long spin
SPIN SPEED
RINSE HOLD
PREWASH
AA40°
QUICK WASH
1.9
47
2.34
5 kg
Cottons
60°-50°-40°30°C
Main wash at
60°-50°-40°30°C
3 rinses
Long spin
SPIN SPEED
RINSE HOLD
PREWASH
AA40°
QUICK WASH
0.95
44
2.15
2.5 kg
Synthetics
60°-50°-40°30°C
Main wash at
60°-50°-40°30°C
3 rinses
Short spin
SPIN SPEED
RINSE HOLD
PREWASH
AA40°
QUICK WASH
0.90
54
1.36
2.5 kg
Delicates
40°-30°C
Main wash at
40°-30°C
3 rinses
Short spin
SPIN SPEED
(only WJD 1257W)
RINSE HOLD
PREWASH
QUICK WASH
0.50
57
1.07
2 kg
Wool
40°-30°C
Main wash at
40°-30°C
3 rinses
Short spin
SPIN SPEED
RINSE HOLD
0.35
52
55
2 kg
Hand wash
40°-30°C
Main wash at
40°-30°C
3 rinses
Short spin
SPIN SPEED
RINSE HOLD
0.2
60
58
Delicate fabrics: e.g.
acrylic fabrics,
viscose, polyester, synthetic
blends
40
Description of
programme
5 kg
Coloured
cotton: e.g.
shirts, blouses,
underwear,
towels, household linen
60
Programme/
temperature
Wool
The “coloured cotton programme” at 60°C is the reference programme for the data entered in the energy label, in
compliance with EEC 92/75 standards.
* This data is given purely as an indication: the consumption values may vary in relation to the quantity and type of
laundry, the temperature of the water supply and the ambient temperature. The data refers to the highest temperature
provided for each programme.
18
132992310.qxd
4/30/03
10:21 AM
Pagina
19
(Nero/Process Black pellicola)
Drying Programmes
Timed drying
Degree of drying
Extra dry
Ideal for
towelling
materials
Type of fabric
Max. load
Spin speed
Drying time mins
1200
80-90
1300
75-85
1400
70-80
1200
60-70
1300
55-65
1400
50-60
1200
70-80
1300
65-75
1400
60-70
1200
50-60
1300
45-55
1400
40-50
2 kg
900
70-80
1 kg
900
35-45
1200
55-65
1300
50-60
1400
45-55
1200
45-55
1300
40-50
1400
35-45
2.5 kg
Cotton and linen
(bathrobes, bath
towels, etc.)
1.5 kg
2.5 kg
Store dry (*)
Suitable for items
to put away
without ironing
Cotton and linen
(towels, T-shirts,
bathrobes)
1.5 kg
Synthetics and mixed
fabrics (jumpers,
blouses, underwear,
household linen)
2.5 kg
Iron dry
Suitable for
ironing
Cotton and linen
(sheets, tablecloths,
shirts, etc.)
1.5 kg
(*) The STORE DRY drying programme for cotton is the reference programme for the Energy Label data, in
compliance with EC directive 92/75.
19
132992310.qxd
4/30/03
10:21 AM
Pagina
20
(Nero/Process Black pellicola)
Maintenance and Cleaning
Before any maintenance or cleaning is carried out you
must DISCONNECT the appliance from the electricity
supply.
Descaling
The water we use normally contains lime. It is a good
idea to periodically use a water softening powder in the
machine. Do this separately from any laundry washing,
and according to the softening powder manufacturer's
instructions. This will help to prevent the formation of
lime deposits.
C0066
C0067
C0068
P1086
After each wash
Leave the door open for a while. This helps to prevent
mould and stagnant smells forming inside the appliance.
Keeping the door open after a wash will also help to
preserve the door seal.
Cleaning the drawer recess
Maintenance Wash
Having removed the drawer, use a small brush to clean
the recess, ensuring that all washing powder residue is
removed from the upper and lower part of the recess.
Replace the drawer and run the rinse programme
without any clothes in the drum.
With the use of low temperature washes it is possible to
get a build up of residues inside the drum.
We recommend that a maintenance wash be performed
on a regular basis.
To run a maintenance wash:
● The drum should be empty of laundry.
● Select the hottest cotton wash programme.
● Use a normal measure of detergent, must be a
powder (such as Ariel Futur).
External cleaning
P0038
Clean the exterior cabinet of the appliance with soap and
water only, and then dry thoroughly.
Cleaning the filter
Cleaning the dispenser drawer
The water drain filter
The washing powder and additive dispenser drawer
should be cleaned regularly.
Remove the drawer by pressing the catch downwards
and by pulling it out. Flush it out under a tap, to remove
any traces of accumulated powder.
To aid cleaning, the top part of the additive compartment
should be removed.
A clean filter is important for the correct functioning of
the machine, and should therefore be cleaned after every
washing programme.
Open the filter door and place a container underneath to
catch any spillage.
P0861
20
132992310.qxd
4/30/03
10:21 AM
Pagina
21
(Nero/Process Black pellicola)
If the filter is blocked and the machine is unable to drain
you will need to drain the water manually from the
machine at this stage. To do this, unhook the drain hose
from the standpipe or sink and hold the end of the hose
over a bowl on the floor. The water should drain by
gravity into the bowl. When the bowl is full, hook the
hose back up and empty the bowl. Repeat the procedure
until water stops flowing out.
Unscrew and remove the filter.
P1090
The dangers of freezing
P0860
If the machine is exposed to temperatures below 0°C,
certain precautions should be taken.
● Turn off the water tap.
● Unscrew the inlet hose.
● Unhook the drain hose from the rear support and
position the end of this hose and that of the inlet
hoses in a bowl. Run the draining programme.
To do this:
● Switch the machine on
● Select a washing programme
● Press the SKIP/RESET button three times
● Press START/PAUSE button
● Disconnect the appliance.
● Screw the inlet hose and reposition the drain hose.
● When you intend to start the machine up again,
make sure that the room temperature is above 0°C.
P0859
Clean carefully under a fast running tap.
P0040
Warning
When the appliance is in use and depending on the
programme selected there can be hot water in the filter.
Never remove the filter during a wash cycle, always
wait until the appliance has finished the cycle, and is
empty. When replacing the filter, ensure it is securely
retightened so as to stop leaks and young children being
able to remove it.
The water inlet filter
If your water is very hard or contains traces of lime
deposit, the water inlet filter may become clogged.
It is therefore a good idea to clean it from time to time.
Turn off the water tap. Unscrew the water inlet hose.
Clean the filter using a hard bristle brush.
Tighten up the inlet hose.
21
132992310.qxd
4/30/03
10:21 AM
Pagina
22
(Nero/Process Black pellicola)
Something Not Working
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without
calling out an engineer. Before contacting your local Service Force Centre, please carry out the checks listed
below.
IMPORTANT: if you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or
installation, a charge will be made even if the appliance is under guarantee.
During machine operation it is possible that one of the following alarm codes appears on the display:
- E10 : problem with the water supply
- E20 : problem with water draining
- E40 : door open
Once the problem has been eliminated, press the START/PAUSE button
to restart the programme. If after all
checks, the problem persists, contact your local Service Force Centre.
Symptom
Possible causes
The machine does not start
●
●
●
●
●
●
The machine does not fill
●
●
●
●
The machine fills then empties
immediately
●
●
●
The machine does not empty and/or
does not spin
●
●
●
●
●
●
There is water on the floor
●
●
●
●
●
Unsatisfactory washing results
●
●
●
●
The door has not been closed. (E40)
The plug is not properly inserted in the power socket.
There is no supply at the socket.
The main fuse or the fuse in the plug has blown.
The START/PAUSE button has not been depressed.
The DELAY START option has been selected.
The water tap is closed. (E10)
The filter in the inlet hose is blocked. (E10)
The inlet hose may be squashed or kinked. (E10)
The door has not been closed. (E40)
The end of the drain hose is too low.
The end of the drain hose is submerged in water.
There is no vent in the end of the drain hose.
The drain hose may be squashed or kinked. (E20)
The RINSE HOLD option has been selected.
The drain filter may be blocked. (E20)
The drain hose extension, if fitted, is not correct. Follow the
instructions for connecting to the waste.
The drainage system pipes are blocked.
The wash load is unbalanced: redistribute the clothes inside the drum to
allow the machine to spin.
Too much detergent or unsuitable detergent has been used (creates too
much foam).
Check whether there are any leaks from the inlet hose fittings. It is not
always easy to see this as the water runs down the hose; check to see if
it is damp.
The drain hose may be damaged or not securely positioned.
The detergent dispenser drawer or recess is clogged.
The drainage system pipes are blocked.
Too little detergent or unsuitable detergent has been used. An
insufficient amount of detergent leaves the laundry looking grey and
causes lime scale to form.
Stubborn stains have not been treated prior to washing
The correct wash programme/temperature has not been selected.
Too much laundry has been placed in the drum.
22
132992310.qxd
4/30/03
10:21 AM
Pagina
23
(Nero/Process Black pellicola)
Symptom
Possible causes
The machine vibrates when spinning
●
●
●
●
●
The door will not open
The internal packing has not been removed.
The machine is in contact with the wall or furniture.
The machine is not level and stable (check diagonally).
The washing load is badly distributed in the drum.
Maybe there is very little laundry in the drum.
The water level is above the bottom edge of the door.
The machine is heating the water or drying the clothes.
● The drum is turning.
The door can only be opened when the relevant light has gone out.
●
●
The electronic unbalance detection device has cut in because the
laundry is not evenly distributed in the drum. The laundry is
redistributed by reverse rotation of the drum. This may happen several
times before the unbalance disappears and normal spinning can resume.
If, after few minutes, the laundry is still not evenly distributed in the
drum, the machine will spin at a lower spin or will not spin. In this
case, redistribute the load manually and select the spin programme.
The machine is fitted with a type of motor which makes an unusual
noise compared with other traditional motors. This new motor ensures
a softer start and more even distribution of the laundry in the drum
when spinning, as well as increased stability of the machine.
Spinning starts late or the machine
does not spin
●
The machine makes an unusual
noise
●
No water is visible in the drum
●
Machines based on modern technology operate very economically
using very little water without affecting performance.
The machine does not dry or does
not dry properly
●
The drying time or degree of drying has not been selected
The water tap is not turned on (E10)
The drain filter is clogged (E20)
The machine is overloaded
The selected drying time or degree of dryness was not suitable for the
laundry
●
●
●
●
Before calling out an engineer, please ensure you have
read the details under the heading “Something Not
Working”.
When you contact the Service Force Centre you will
need to give the following details:
1. Your name, address and post code
2. Your telephone number
3. Clear and concise details of fault
4. The model and serial number of the appliance (found
on the rating plate - see picture)
5. The purchase date.
Please note that a valid purchase receipt or
guarantee documentation is required for inguarantee service calls.
Service & Spare Parts
In the event of your appliance requiring service, or if
you wish to purchase spare parts, please contact your
local Service Force Centre by telephoning:
0870 5 929929
Mo
Pro d. .....
d.
No .....
. .....
Your telephone call will be automatically routed to the
Service Force Centre covering your post code area.
For the address of your local Service Force Centre and
further information about Service Force, please visit the
website at www.serviceforce.co.uk.
For Customer Service in Ireland please contact us at the
address below:
Zanussi Electrolux
Electrolux Group (Irl) Ltd
Long Mile Road
Dublin 12
Republic of Ireland
.
Ser
. No
.....
. .....
....
Tel: +353 (0)1 4090751
Email: service.eid@electrolux.ie
Mod. ..........
Prod. No. ...........
P0042 BD
23
Ser. No. .........
132992310.qxd
4/30/03
10:21 AM
Pagina
24
(Nero/Process Black pellicola)
Customer Care Department
Customer Care Department
Zanussi Electrolux
55-77 High Street
Slough
Berkshire
SL1 1DZ
Tel 08705 727727*
For general enquiries concerning your Zanussi
Electrolux appliance or for further information on
Zanussi Electrolux products, please contact our
Customer Care Department by letter or telephone at the
address below or visit our website at www.zanussi.co.uk
* calls to this number may be recorded for training
purposes.
Guarantee Conditions
Standard guarantee conditions
●
We, Zanussi Electrolux, undertake that if, within 12
months of the date of the purchase, this ZANUSSI
ELECTROLUX appliance or any part thereof is proved
to be defective by reason only of faulty workmanship or
materials, we will, at our option repair or replace the
same FREE OF ANY CHARGE for labour, materials or
carriage on condition that:
● The appliance has been correctly installed and used
only on the electricity supply stated on the rating
plate.
● The appliance has been used for normal domestic
purposes only, and in accordance with the
manufacturer’s instructions.
● The appliance has not been serviced, maintained,
repaired, taken apart or tampered with, by any
person not authorised by us.
● All service work under this guarantee must be
undertaken by a Service Force Centre.
● Any appliance or defective part replaced shall
become the Company’s property.
● This guarantee is in addition to your statutory and
other legal rights.
Home visits are made between 8.30am and 5.30pm
Monday to Friday. Visits may be available outside these
hours in which case a premium will be charged.
●
European guarantee
If you should move to another country within Europe
then your guarantee moves with you to your new home
subject to the following qualifications:
● The guarantee starts from the date you first
purchased your product.
● The guarantee is for the same period and to the same
extent for labour and parts as exists in the new
country of use for this brand or range of products.
● The guarantee relates to you and cannot be
transferred to another user.
● Your new home is within the European Community
(EC) or European Free Trade Area.
● The product is installed and used in accordance with
our instructions and is only used domestically, i.e. a
normal household.
● The product is installed taking into account
regulations in your new country.
Before you move please contact your nearest Customer
Care Centre, listed below, to give them details of your
new home. They will then ensure that the local Service
Organisation is aware of your move and able to look
after you and your appliances.
France
Senlis
+33 (0) 344 62 29 29
Germany
Nurnberg
+49 (0) 800 234 7378
Italy
Pordenone
+39 0434 39 4700
Sweden
Stockholm
+46 (0) 8 672 53 90
UK
Slough
+44 (0) 1753 219897
Ireland
Dublin
+353 (0)1 4090751
Exclusions
This guarantee does not cover:
●
●
Appliances found to be in use within a commercial
environment, plus those which are subject to rental
agreements.
Products of Zanussi Electrolux manufacture which
are NOT marketed by Zanussi Electrolux.
Damage or calls resulting from transportation,
improper use or neglect, the replacement of any light
bulbs or removable parts of glass or plastic.
Costs incurred for calls to put right an appliance
which is improperly installed or calls to appliances
outside the United Kingdom.
24
132992310.qxd
4/30/03
10:21 AM
Pagina
25
(Nero/Process Black pellicola)
Installation Instructions
It is dangerous to alter the specifications or
attempt to modify this product in any way.
Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
Any plumbing work required to install this
appliance should be carried out by a qualified
plumber or competent person.
Should the appliance power supply cable need to
be replaced, this should be carried out by our
Service Force Centre.
Technical Specifications
DIMENSIONS
Height
Width
Depth
85 cm
60 cm
57 cm
POWER SUPPLY VOLTAGE
TOTAL POWER ABSORBED
WATER PRESSURE
MAX LOAD CAPACITY
230-240 V/50 Hz
2050 W (10A)
Minimum
Maximum
50 kPa
800 kPa
Washing
Cotton, linen
Synthetics
Delicate fabrics
Wool and Hand Wash
Drying
Cotton, linen
Synthetics
SPIN SPEED
Maximum
CONSUMPTION DATA FOR WASHING
5 KG NORMALLY SOILED COTTON
ITEMS AT 60°C
Energy
Water
5 kg
2.5 kg
2.5 kg
2 kg
2.5 kg
2 kg
1200 rpm ( WJD 1257 W)
1200 rpm ( WJD 1257 S )
1300 rpm ( WJD 1357 S )
1400 rpm (WJD 1457 W)
0.95 kWh
44 litres
This appliance complies with the following E.E.C. Directives:
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;
- 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.
25
132992310.qxd
4/30/03
10:21 AM
Pagina
26
(Nero/Process Black pellicola)
Fill all the holes with the plastic plugs supplied with the
instruction booklet.
Unpacking
All transit bolts and packing must be removed
before using the appliance.
You are advised to keep all the packaging for re-use in
case the machine is to be transported again.
Using a spanner unscrew and remove the two rear
bottom screws. Slide out the two plastic pins.
Lay the machine gently on its back, making sure that the
hoses are not squashed.
P1128
P0002
Important !
You are advised to keep all the packaging for re-use in
case the machine is to be transported again.
In case of moving out the same precautions as per
paragraphe “The dangers of freezing” must be taken
i.e. the residual water in the hoses must be pumped out.
Positioning
P0001
P1129
Install the machine on a flat hard floor.
Make sure that air circulation around the machine is not
impeded by carpets, rugs etc. Check that the machine
does not touch the wall or other kitchen units.
Never place cardboard, wood or similar materials under
the machine to compensate for any unevenness in the
floor.
Your new washing machine has been designed to be
permanently plumbed in to your home’s water supply
and drainage system. However, if this is not possible, it
may be connected to a suitable existing tap with the
drain hose discharging into a sink.
The appliance has an inlet hose, with female 3/4” BSP
thread connector. If this connection is not compatible
with the plumbing of the existing installation, a variety
of connectors are available from good hardware stores
and plumbers merchants to suit most domestic
plumbing. Any alteration to your existing plumbing
must be carried out by a competent person, or qualified
plumber.
Remove the polystyrene block from the bottom of the
machine and release the two plastic bags.
Very carefully slide out the left polythene bag, removing
it towards the right and then downwards.
1
2
3
P1124
P1126
Repeat the operation for the right polythene bag,
removing it towards the left and then upwards.
Installation on a Suspended Floor
P1127
Suspended wooden floors are particularly susceptible to
vibration. To help prevent vibration we recommend you
place a waterproof wood panel, at least 15 mm thick
under the appliance, secured to at least 2 floor beams
with screws. If possible install the appliance in one of
the corners of the room, where the floor is more stable.
Remove the polystyrene base.
Set the machine upright and unscrew the remaining rear
screw. Slide out the relevant pin.
26
132992310.qxd
4/30/03
10:22 AM
Pagina
27
(Nero/Process Black pellicola)
Water inlet
30 cm (12")
Connect the hose supplied with the machine to a tap
with a 3/4” thread.
Do not use already employed hoses.
P1074
The standpipe should have an internal diameter of
approximately 38mm (see diagram) thus ensuring there
is an air break between the drain hose and standpipe.
P1088
Min. 30 cm.(12")
Installation should comply with local water authority
and building regulations’ requirements.
The appliance must be connected to a cold water
supply.
A minimum water pressure of 50 kPa (0.5 bar) is
required for safe operation of the appliance.
38 mm.(1/1 2") diameter
standpipe
P1040
If you cannot make the cold water connection direct
from the rising mains, you may be able to operate the
appliance from your cold water storage system.
There should be a minimum distance of 5.02m
(161/2 ft) between the appliance’s inlet and the bottom
of the water storage tank.
Set the hose correctly by loosening the ring nut. After
positioning the inlet hose, be sure to tighten the ring nut
again to prevent leaks.
When discharging into a standpipe ensure that the top of
the curve in the hose end is no more than 90cm (35.4'')
and no less than 60cm (23.6'') above floor level. The
upright standpipe should have a minimum length of
30cm (12'') from the bottom of the elbow to the top of
the pipe (see diagram).
Min.60 cm.
(23.6")
Max. 90 cm.(35.4")
3 pin
P1039
P0021
Make sure that it is designed in such a way, that the end
of the drain hose cannot be covered with water. The
drain hose may be extended to a maximum of 4 metres.
An additional drain hose and joining piece
is available from your local Service Force Centre.
The joining piece must have an internal diameter of
18mm.
Water drainage
This appliance is designed to be permanently plumbed
into your home's water supply and drainage system.
The appliance drain hose should hook into a standpipe,
the hook in the drain hose is formed using the plastic
“U-Piece” supplied.
27
132992310.qxd
4/30/03
10:22 AM
Pagina
28
(Nero/Process Black pellicola)
If you intend the drain hose to empty into a sink, make
sure that the sink is empty and the plug hole is not
blocked. Use the plastic “U-Piece” supplied.
Warning
The machine should NOT be placed on deep pile
carpeting.
Note
Please ensure that when the appliance is installed it is
easily accessible for the engineer in the event of a
breakdown.
In the interest of the
environment
P0022
Important
Washing machines and dishwashers should be
connected to the FOUL drainage system, the water will
then be taken to a sewage works for treatment before
being discharged safely into a river.
It is essential that these appliances are not connected to
the surface water drainage system as this water is
discharged directly into a river or stream and may cause
pollution.
If you require any further advice please contact your
local water authority.
Before connecting up the machine to new pipework or
to pipework that has not been used for some time, run
off a reasonable amount of water to flush out any debris
that may have collected in the pipes.
Levelling
Level the washing machine by raising or lowering the
feet. The feet may be tight to adjust as they incorporate
a self locking nut, but the machine MUST be level and
stable (check diagonally).
SHOWER
P1051
SINK
TOILET
BATH
Any necessary adjustment can be made with a spanner.
Accurate levelling prevents vibration, noise and
displacement of the machine during operation.
Some vibration is inevitable, especially if mounted on a
wooden floor.
Sprung wooden floors are particularly susceptible to
vibration. For advice, consult a builder. If possible,
always place the machine on a solid floor.
WASHING
MACHINE
BIDET
DISHWASHER
RAINWATER
'RUN-OFF'
FOUL DRAIN
SURFACE WATER
DRAINS & SEWERS
UNTREATED
DISCHARGE
Special conditions
FOUL SEWERS
SEWAGE
TREATMENT
WORKS
TREATED
DISCHARGE
RIVER
If the floor is carpeted or covered with crumbly or soft
material, insert a rigid support base under the feet to
prevent noise, vibration or displacement. The base
should protrude a few centimetres beyond the edges of
the machine.
P0987
28
RIVER
132992310.qxd
4/30/03
10:22 AM
Pagina
29
(Nero/Process Black pellicola)
Electrical connection
The wire coloured brown must be connected to the
terminal marked «L» or coloured red.
Upon completion there must be no cut, or stray strands
of wire present and the cord clamp must be secure over
the outer sheath.
Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
WARNING: THIS APPLIANCE MUST BE
EARTHED.
The manufacturer declines any liability should
this safety measure not be observed.
WARNING:
A cut off plug inserted into a 13 amp socket is
a serious safety (shock) hazard.
Ensure that the cut off plug is disposed of
safely.
Before switching on, make sure the electricity supply
voltage is the same as that indicated on the appliance’s
rating plate. The rating plate is located at the top of the
rim of the open door.
Should the appliance power supply cable need to be
replaced, this should be carried out by our Service
Force Centre.
Note
When the appliance is installed the power supply cable
must be accessible.
Mo
Pro d. .....
d.
No .....
. .....
.
Ser
. No
.....
. .....
....
Permanent connection
Mod. ..........
Prod. No. ...........
In the case of permanent connection it is necessary that
you install a double pole switch between the appliance
and the electricity supply (mains), with a minimum gap
of 3mm between the switch contacts and of a type
suitable for the required load in compliance with the
current electrical regulations.
The switch must not break the yellow and green earth
cable at any point.
Ser. No. .........
P0042 BD
The appliance is supplied with a 13amp plug fitted.
In the event of having to change the fuse in the plug
supplied, a 13amp ASTA approved (BS1363/A) fuse
must be used.
Should the plug need to be replaced for any reason,
proceed as described below.
The wires in the mains lead are coloured in accordance
with the following code:
Green and Yellow
- Earth
Blue
- Neutral
Brown
- Live
GREEN & YELLOW
13 A
E
N
L
BROWN
BLUE
P1041
CORD CLAMP
The wire coloured green and yellow must be connected
to the terminal marked with the letter «E» or by the
earth symbol
or coloured green and yellow.
The wire coloured blue must be connected to the
terminal marked «N» or coloured black.
29
132992310.qxd
4/30/03
10:22 AM
Pagina
30
(Nero/Process Black pellicola)
From the Electrolux Group. The world’s No. 1 choice.
The Electrolux Group is the world's largest producer of powered appliances for kitchen, cleaning and outdoor use.
More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners,
chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150 countries
around the world.
© Electrolux plc 2003
Download PDF

advertising