DeLonghi 2507L Electric Heater User Manual

GB
23-03-2004
16:21
Pagina 1
IMPOR TANT INSTRUCTIONS
ELECTRIC OIL FILLED RADIATORS
SAVE THESE INSTRUCTIONS
INSTRUCIONES IMPORTANTES
LOS RADIADORES ELÉCTRICOS DE ACEITE
GUARDE ESTAS INSTRUCCIONES
MODE D’EMPLOI IMPOR TANT
LES RADIATEURS À BAIN D’HUILE
CONSERVEZ CE MODE D’EMPLOI
ISTRUZIONI PER L'USO
RADIATORI AD OLIO
CONSERVARE LE PRESENTI ISTRUZIONI
The De’ Longhi electric oil filled radiators are the finest and most versatile portable heaters available.
Please review the following to ensure the fullest benefit from their features.
Los radiadores eléctricos de aceite De’Longhi son los mejores y más versátiles calentadores portátiles en el mercado.
Favor de repasar la información a continuación para asegurar el beneficio
completo de sus características.
Les radiateurs à bain d’huile De’ Longhi, portables et polyvalents, sont les
meilleurs actuellement disponibles sur le marché.
Afin d’exploiter au mieux les potentialités du produit, lisez attentivement
ce qui suit.
I radiatori ad olio De’ Longhi sono i migliori e più versatili apparecchi di
riscaldamento portatili presenti sul mercato.
Leggere attentamente le presenti istruzioni per sfruttare al meglio le caratteristiche dell'apparecchio.
GB
23-03-2004
16:21
Pagina 2
IMPORTANT SAFEGUARDS
When using electrical appliances, basic precautions should always be taken to avoid the risk of
fire, electric shock and personal injury, including the following:
1. Read these instructions thoroughly before using this heater.
2. If your radiator is equipped with a polythene tape, which serves as carry handle, remove it
prior to connecting the appliance to an outlet.
3. This heater becomes very hot when operating. To avoid burns, do not touch its hot surfaces
with your bare skin. Use the heater’s handle when moving it. Keep combustible materials,
such as furniture, pillows, bedding, papers, clothes and curtains at least 3 feet (90 cm) away
from the heater’s front and top, and also well away from its sides and rear.
4. Extreme caution should be taken when leaving an operating heater unattended near children
or handicapped persons.
5. Always unplug the heater when it is not in use.
6. Do not operate your heater when its cord or plug has been damaged or
after it has malfunctioned, has been dropped or damaged in any manner. If
you notice any leakage of oil, switch it off immediately and contact a service
center as indicated in these instructions. Return the heater to an authorized
service facility for inspection, electrical or mechanical adjustment, or repair.
7. Your heater should not be operated outdoors.
8. Your heater is not intended for use in bathrooms, laundry areas and similar indoor locations.
Never locate the heater where it might fall into a bathtub or other water containers.
9. Do not run the electric cord under carpeting. Do not cover cord with throw
rugs, runners, or the like. Run the cord away from traffic areas and where it
will not be tripped over.
10.To disconnect the heater, switch it OFF, then unplug its cord from the outlet.
11. Connect to properly polarized outlets only.
12. Do not insert or allow foreign objects to enter any ventilation or exhaust opening, as this might
cause an electric shock, fire, or damage the heater.
13. To prevent fire, do not block air intakes or exhaust in any manner. Do not place the heater on
soft surfaces, like a bed, where openings may be blocked.
14. Your heater’s internal parts may become hot or issue sparks during normal
operation. Therefore, you should not use it in areas where gasoline, paint, or
flammable liquids are used or stored.
15. Use this heater only as described in this manual. Any other use not recommended by the
manufacturer might cause fire, electric shock, or personal injury.
16. To prevent overload and blown fuses, be sure that no other appliances are plugged into the
same shared outlet, or a separate outlet on the same shared circuit.
17. The heater’s electric cord and plug may grow warmer during normal operation. However,
exceedingly hot or deformed plug or cord are not normal, and are often the result of a defective power outlet. You should replace such outlets prior to further use of the heater. Continuous
use of defective outlets might cause cord overheating and fire.
18. The use of extension cords is not recommended, as they are likely to
overheat and increase the risk of fire. However, where necessary, you may
use a No. 1 4 AWG or larger cord rated for 1875 watts or more; the extension cord should not be shared by any other appliance.
19. Make sure the heater is firmly plugged into the wall outlet. Please note that the quality of wall
outlets may deteriorate over time: Check the electric plug periodically for signs of overheating
or deformation, and in such cases, stop using that outlet and have it fixed.
20. Check that neither the heater nor the power cable has been damaged in any way during
transportation.
21. Make sure that no pieces of polystyrene or other packaging material have been left between
heating elements. If necessary, remove such pieces using a vacuum cleaner.
22.When switching the heater on for the first time, allow it to run at full power
for about two hours to get rid of a possibly unpleasant smell. Make sure
that the room where the heater is placed is well ventilated during this first
operation. Soft crackling sounds are normal during the heater’s first operation.the appliance is located is well ventilated during this operation. It is normal for the appliance to emit small cracking sounds when you turn it on for
the first time.
CAUTION: To prevent electric shock match wide blade of plug to wide slot, fully insert.
SAVE THESE INSTRUCTIONS
2
GB
23-03-2004
16:21
Pagina 3
HOW TO USE YOUR HEATER
FITTING THE WHEELS
Remove the feet with the bracket wheels from the polystyrene packing. Turn the
radiator upside-down and rest on the polystyrene.
Fit the wheels to the spindles on the feet and push firmly until they click into position.
Pull each wheel to check that it is correctly inserted.
The feet with the casters must be fitted with two arc-shaped brackets only between
the 1st and 2nd element and the penultimate (see fig. 1 to 3 inclusive).
fig. 1
fig. 2
fig. 3
MODELS WITH “EASY WHEEL”SYSTEM
Turn the radiator upside-down on a rug or a soft surface in order to prevent damaging the paint finish. Fully unfold the castors by turning them outwards (Fig. 4).
Turn the radiator back to its upright position.
fig. 4
1. LOCATION
Place heater on floor beneath coldest window in the room or any desired location.
Your heater will minimize the effect of cold drafts.
The heater must not be located immediately below a socket-outlet.
2
Do not use this radiator in rooms having a surface area less than 4 m (43 sq. ft.).
2. CONNECTION
The radiator must be connected to a properly polarized A/C 110/120 V household
outlet in perfect working conditions.
Keep loose clothing or bedding, furniture and flammable material away from the
wall outlet where the heater plug is fitted in.
Your product is equipped with a polarized alternating current line plug (a plug having one
blade wider than the other). This plug will fit into the power outlet only one way. This is a
safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug.
If the plug should still fail to fit, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.
3
GB
23-03-2004
16:21
Pagina 4
OPERATION AND USE
1) SETTING THE CLOCK
For the first time, set the clock to the correct time, proceeding as follows:
• Press the button “hour” until the display shows the hours for the correct time,
then release the button.
• Press the button “min” until the display shows the minutes for the correct time,
then release the button.
When setting the correct time, the numbers will flash on the display.
The flashing of the numbers will continue for a few seconds after the adjustment has
finished then stop on the correct time and the clock start working.
To change the time, press pushbuttons “hour” or “min” for at least 5 seconds, then
proceed as above to modify both hours and minutes.
AM
MAN
:
correct time
Set temperature
°F
0
2) MANUAL FUNCTIONING
To operate the appliance in “manual” mode, press the “ON MODE” button.
To set the required power level, proceed as follows: press the “ON MODE" button, and then
press again one or more times within 5 seconds to select the power level, as per the following sequence:
AM
MAN
Maximum power
Medium power
Minimum power
:
AM
MAN
:
AM
°F
MAN
:
AM
°F
MAN
:
Off
°F
°F
0
At any time during “Manual” operation, pressing the “ON MODE” button once
will display the previously set power level for 5 seconds; after this 5 second period,
the display will return to show the current operating power.
If Maximum power has been selected, adjust the “+” or ”-” button to the desired comfort temperature, from 42 to 95°F (5 to 35°C). By pushing once the “+” or “-” button the desired
temperature (shown on the right side of the display) will increase or decrease of 1°F. Keep
pushbutton pressed to move through the temperature in fast mode.
AM
correct time
4
MAN
:
set temperature
°F
GB
23-03-2004
16:21
Pagina 5
This heater has Electronic Climate Control which automatically monitors and selects
the ideal power setting to maintain your chosen temperature.
If the selected temperature is higher than the actual room temperature, the appliance
will start automatically and rapidly heat the room until it reaches the selected temperature. The unit will automatically maintain the temperature at a constant level, by
switching between maximum, medium, minimum power and OFF.
If medium power level has been selected using the “ON MODE” button, the
appliance will modulate between medium, minimum power and OFF to maintain a
selected temperature.
ANTI-FREEZE SETTING
Press the “ON MODE” button and it is recommended to select the maximum power
level. Set the temperature to 42°F with the “-” button. When set in this way, the
appliance will switch on automatically only if the room temperature falls below 42°F,
to prevent freezing, at minimum energy consumption.
N.B.This function is not guaranteed in the event of power failures, lasting more than
2 minutes.
Programming the Electronic Timer
The timer allows you to set two programs in a 24h period.
To program the timer:
Press the “Timer button A, this accesses the program, the following is displayed:
- The flashing message “--:--“;
- The message “ON” at the bottom left (ON time setting);
- The symbol “A” at the right indicating that the first program controlling is being set;
To setting the starting time press “hour button” to set the hour and “min button” to set the
minutes, then confirm the ON time by pressing the “Timer button A” again. The words
“OFF” and “00:00” appear on the display.
Set the time you want the appliance to go OFF using the “hour button” and “min button”, then confirm the OFF time by pressing the “Timer Function A” button again.
At this point, the word “AUTO” appears at the top of the display and the “TIMER
ON” indicator light comes on to indicate that the appliance is ready to operate
at the programmed time maintaining the preset comfort temperature (fig.5).
AUTO
:
°F
fig. 5
-
To set the program B press “Timer button B” and follow the
same procedure as described for the program A.
Use the “ +” or “ -” buttons to set the desired comfort temperature, as
described above.
When set in this way the heater will automatically switch on at the set time for the
designated time period and automatically maintain the preset comfort temperature.
5
GB
23-03-2004
16:21
Pagina 6
To cancel a preset aprogramme, press the timer button A or B once and then press
the hour button until the display shows “--:--“ (fig.6).
AUTO
:
fig. 6
TIMER OVERRIDE
To operate the appliance without using the programmes (timer), press the “ON
MODE” button (Fig.5). The yellow lamp will go off.
IMPORTANT:
If the heater looses its electricity supply for more than 2 minutes the appliance does
not switch on. The display shows the blinking numbers.
To switch it on, repeat the above described operations.
WARNINGS
You must leave the heater plugged in at the mains socket to keep the heaters memory
programmed.
If the heater looses its electricity supply for more than 2 minutes, e.g. switched off at
the mains socket or in the event of a power failure, the heater’s programmes will be
lost, and the heater will not work until reset.
A safety device switches the heater off in the event of overheating. To restart the
heater, call the nearest Service Center to change the safety device.
Note: when the safety device intervenes, the heater doesn’t heat but the display
regularly works.
4. MAINTENANCE AND SERVICE
Always remove the plug from the power socket and allow the radiator to cool. Wipe
radiator with a soft damp cloth, do not use detergents and abrasives.
Should the radiator not be in use over a certain length of time, wind the cable round
the holder and store it in a dry place.
This appliance has been built to give many years of trouble free service.
In case of malfunction or doubt, do not try to repair the heater by yourself: it may
result in fire hazard or electric shock.
Call the nearest Service Center (see attached list of Service Centers).
6
GB
23-03-2004
16:21
Pagina 7
LIMITED WARRANTY
This warranty applies to all products with De’Longhi or Kenwood brand names.
Limited Warranty
What does the warranty cover?
We warrant each appliance to be free from defects in material and workmanship. Our obligation under
this warranty is limited to repair at our factory or authorized service center of any defective parts or part
thereof, other than parts damaged in transit. In the event of a products replacement or return, the unit
must be returned transportation prepaid. The repaired or new model will be returned at the company
expense.
This warranty shall apply only if the appliance is used in accordance with the factory directions, which
accompany it, and on an Alternating current ( AC ) circuit.
How long does the coverage last?
This warranty runs for one year (1) from the purchase date found on your receipt and applies only to
the original purchaser for use.
What is not covered by the warranty?
The warranty does not cover defects or damage of the appliance, which result from repairs or alterations to the appliance outside our factory or authorized service centers, nor shall it apply to any
appliance, which has been subject to abuse, misuse, negligence or accidents. Also, consequential and
incidental damage resulting from the use of this product or arising out of any breach of contract or
breach of this warranty are not recoverable under this warranty. Some states do not allow the exclusion
or limitation of incidental or consequential damage, so the above limitation may not apply to you.
How do you get service?
If repairs become necessary, see contact information below:
U.S. Residents:
Please contact our toll free hotline at 1-800-322-3848 or log onto our website at www.delonghi.com.
For all accessories, spare parts or replacement parts, please contact our parts division at 1-800-865-6330.
Residents of Canada: Please contact our toll free hotline at 1-888-335-6644 or log onto our website at www.delonghi.com.
Residents of Mexico: Please refer to the Limited Warranty statement for Mexico.
Please refer to the back page of the manual for De’Longhi addresses.
The above warranty is in lieu of all other express warranties and representations. All implied warranties
are limited to the applicable warranty period set forth above. This limitation does not apply if you enter
into an extended warranty with De’Longhi. Some states do not allow limitations on how long an implied
warranty lasts, so the above exclusions may not apply to you. De’Longhi does not authorize any other
person or company to assume for it any liability in connection with the sale or use of its appliance.
How does state law apply?
This warranty gives you specific legal rights, and you may also have other rights, which vary from state
to state.
7
Download PDF

advertising